KEY KEY NSMMS & CRASTE Sessions CRASTE Sessions NSMMS Sessions
Sunday, 24 June 2018 1600 ‐ 2000 Early Registration Monday, 25 June 2018 0700 ‐ 0745 Speaker Meeting (with Light Breakfast) for Monday's Tutorial & Workshop Presenters 0700 ‐ 0800 Attendee Light Continental Breakfast 0700 ‐ 1700 Registration Open 1100 ‐ 1630 Exhibitor Move‐In 1330 ‐ 1630 Poster Move‐In 1200 ‐ 1330 Lunch Break (On Your Own ‐ See Registration Desk for Area Restaurants & Food Trucks) 1700 ‐ 1900 Welcome Reception and Exhibit & Poster Kick‐Off Co‐Sponsored by Materials Research & Design, Inc. and Southern Research NSMMS & CRASTE Tutorials & Workshops
Organizers: Mr. Jerry Brockmeyer, Ultramet; Mr. Nickolas Demidovich, FAA Commercial Space Transportation; Mr. Kenneth Knittel, Raytheon Missile Systems; and Dr. Gerald Russell, Integration Innovation, Inc. 0800 ‐ 0845 Keynote Presentation: Re‐Tooling NASA’s Engineering Predictive Practices for Durability and Damage Tolerance (D&DT) Mr. Richard Russell, NASA Kennedy Space Center
0845 ‐ 0930 Presentation To Be Announced 0930 ‐ 0935 Transition to Multi‐Track Tutorials, Workshops, & Small Business Forum
Track One Track Two Track Three Track Four
NSMMS & CRASTE Tutorials & Integrated Vehicle Health Management (IVHM) & Small Business Forum One-On-Ones Workshops , cont. Integrated System Health Monitoring (ISHM) Workshop
Workshop Organizer: Mr. James Larkin, Aerojet Rocketdyne 0935 ‐ 1035 AFRL Rocket Lab Counterintelligence Threat to the U.S. 0935 ‐ 1005 Miniaturized Electro‐Mechanical Small Business Forum One‐On‐Ones New Technology Portfolio and Rocket Missile and Space Enterprises Impedance Hardware for Structural Propulsion Vision SA Robert Kring, Air Force Office of Special Health Monitoring of Space Systems Investigations Dr. Andrei Zagrai, New Mexico Institute of Mining and Technology
1005 ‐ 1035 Application of Phase Mapping Techniques to Characterize Engine Stability Behaviors Mr. Iddrisu Seidu, Air Force Research Laboratory 1035 ‐ 1100 Break 1100 ‐ 1200 Extreme Environment Materials Presentation to be Announced1100 ‐ 1130 Innovative Thermal Protection Small Business Forum One‐On‐Ones Dr. Ali Sayir, Air Force Office of Scientific Architecture for High Speed Systems Research Mr. Ian Fuller, Stryke Industries
Printed (4/19/2018) ‐ Pg. 1 1130 ‐ 1200 Oxidation Protection of Carbon/Carbon Composites Dr. Anatoiliy Shchetkovskiy Plasma Processes, LLC 1200 ‐ 1330 Lunch Break (On Your Own ‐ See Registration Desk for a list of Area Restaurants & Food Trucks) 1200 ‐ 1330 Regulatory Environment ‐ Commercial Space Transportation Development Workshop Mr. Phil Brinkman, FAA Office of Commercial Space Transportation Lunch Boxes may be ordered NSMMS & CRASTE NSMMS & CRASTE IVHM/ISHM, cont. NSMMS Tutorials & Workshops, cont. Tutorials & Workshops, cont. Ground Test & Evaluation
Lead Organizer: Dr. Bruce Moylan, U.S. Army AMRDEC Co-Organizers: Dr. Anthony Calomino, NASA Langley Research Center; Dr. Gerald Russell, i3 Corporation; and Mr. Andy Swanson, Air Force Research Laboratory
Session Chair: Julie Carlile, Air Force Research Laboratory
1330 ‐ 1430 Modular Rocket Engine Technologies America Makes ‐ Smart Collaboration in 1330 ‐ 1400 Manufacturing and Characterization of 1330 ‐ 1335 Session Introduction Dr. Dan Brown, Air Force Research Laboratory Additive Manufacturing a 3D Woven Thermal Protection System 1335 ‐ 1350 Full Scale Extreme Environment Mr. John Wilczynski, NCDMM/America Makes (3D‐TPS) Testing at AFRL Mr. Aaron Tomich, T.E.A.M., Inc. Mr. Andrew Swanson, Air Force Research Laboratory 1400 ‐ 1430 Novel Sensing Technology for Materials 1350 ‐ 1415 Overview of Thermal‐Structural & Processing of CMC Testing at NASA Armstrong Dr. Ming Chen, Air Force Research Mr. Larry Hudson, NASA Armstrong Laboratory Flight Research Center 1430 ‐ 1435 Transition to Other Tutorials/Workshops 1415 ‐ 1440 LHMEL Advances for Materials Development and Risk Reduction Testing Dr. Thomas Robbins, UES, Inc. 1435 ‐ 1535 Reusable Hypersonics: How to get to TRL 5 Workshop to Be Announced 1435 ‐ 1505 Calibration of High Temperature 1440 ‐ 1505 Recent Experimental and Analytical & 6 Faster Instrumentation for use in Hypersonic Advances for Predicting Surface Dr. Barry Hellman, Air Force Research Applications Temperature and Heat Flux in High‐ Laboratory Ms. Shelby Massey, Southern Research Speed Flight Applications Dr. Jay Frankel, University of Tennessee, Knoxville
1505 ‐ 1530 Open Discussion 1505 ‐ 1530 Presentation To Be Announced Mr. Walter Bruce, NASA Langley Research Center
1535/1530 ‐ Break 1600 NSMMS & CRASTE NSMMS & CRASTE NSMMS & CRASTE NSMMS Tutorials & Workshops, cont. Tutorials & Workshops, cont. Tutorials & Workshops, cont. Ground Test & Evaluation, cont.
Printed (4/19/2018) ‐ Pg. 2 1600 ‐ 1700 Reusable Hypersonics: How to get to TRL 5 Workshop to Be Announced Presentation to be Announced 1600 ‐ 1625 Mid‐Pressure Arc Heater Upgrade to & 6 Faster, cont. the AEDC High‐Temperature Material Characterization and Evaluation Capability
Mr. Jonathan Kodman, National Aerospace Solutions
1625 ‐ 1650 Blunt Nose Boundary‐Layer Transition Testing using a Combined Arc Jet and Ballistic Range Method Mr. Marshall Polk, Arnold Engineering Development Complex
1650 ‐ 1715 Testing with the Laser‐Enhanced Arc Jet Facility at NASA Ames Research Center Dr. Ethiraj Venkatapathy, NASA Ames Research Center 1700/1715 ‐ Welcome Reception and Exhibit & Poster Kick‐Off 1900 Co‐Sponsored by Materials Research & Design, Inc. and Southern Research Tuesday, 26 June 2018
0700 ‐ 0745 Speaker Meeting (with Light Breakfast) for Tuesday Afternoon Presenters 0700 ‐ 0800 Attendee Light Continental Breakfast 0700 ‐ 1730 Registration Open 1205 ‐ 1330 Lunch Break (On Your Own ‐ See Registration Desk for Area Restaurants & Food Trucks) 1330 ‐ 1730 Exhibits and Poster Session Open 1800 ‐ 2100 Tuesday Evening Networking Reception Sponsored by Orbital ATK NSMMS & CRASTE Plenary Session
0800 ‐ 0815 Opening Remarks & National Anthem 0815 ‐ 1200 Plenary Session Speakers to Be Announced 1200 ‐ 1205 2019 NSMMS & CRASTE Location Announcement 1205 ‐ 1330 Lunch Break (On Your Own ‐ See Registration Desk for a list of Area Restaurants & Food Trucks)
Track One Track Two Track Three Track Four
Printed (4/19/2018) ‐ Pg. 3 NSMMS NSMMS CRASTE CRASTE Ground Test & Evaluation Mission Operations and Experiments Emerging Propulsion Systems Innovative Test Methodologies and Platforms in Space Lead Organizer: Dr. Bruce Moylan, U.S. Army Session Chair: Mr. Robert Taylor, Air Force Research Session Chair: Mr. Nickolas Demidovich, FAA AMRDEC Lead Organizer: Mr. James Tucker, Southern Laboratory Commercial Space Transportation Co-Organizers: Dr. Anthony Calomino, NASA Research Co-Chair: Mr. Anthony Brinkley, Bradshaw Engineering Co-Chair: Mr. Gautham Ramachandran, Lockheed Martin Langley Research Center; Dr. Gerald Russell, i3 Co-Organizers: Mr. Eric Becker, Air Force Corporation; and Mr. Andy Swanson, Air Force Research Laboratory; Dr. Anthony Calomino, Research Laboratory NASA Langley Research Center; Dr. Derek Doyle, Air Force Research Laboratory; Mr. Session Chair: Julie Carlile, Air Force Research Michael Fuller, Orbital ATK; Ms. Beth Kelsic, Ball Laboratory Aerospace; Mr. John Vasquez, Naval Research Laboratory; and Ms. Cynthia Wallace, Ball Aerospace
Session Chair: Dr. Paul Lightsey, Ball Aerospace
1330 ‐ 1335 Session Introduction Session Introduction Session Introduction Session Introduction 1335 ‐ 1400 Improved Rain Erosion Test Capability at the ASETS‐II Development and Results from X‐ Aerospike Development Efforts: A Comprehensive Reusable Liquid Rocket Engine System Requirement Holloman High Speed Test Track (HHSTT) 37B Flight Review and Compilation of Research, Development, Development for a Hypersonic Flight Mr. Bryan Sinkovec, 846 TS, United States Air Mr. Kevin Irick, Air Force Research Laboratory and Testing Data Experimentation Vehicle Force Mr. Nils Sedano, Air Force Research Laboratory Mr. Robert Taylor, Air Force Research Laboratory
1400 ‐ 1425 Presentation to be Announced Overview and Status of the Heatshield for Freestream Effects on Aerospike Nozzle Performance Reusable, Affordable Bantam after Burning Rocket Mr. Shawn Ericson, Integration Innovation, Extreme Entry Environment Technology Mr. Alan Kawasaki, Sierra Lobo, Inc. Engine (ABRE) Propulsion for the Hypersonic Inc. (HEEET) Development at NASA Routine Experimental Vehicle (HyREV) Reusable Dr. Mairead Stackpoole, NASA Ames Research Hypersonic Test Bed Center Mr. Joaquin Castro, Aerojet Rocketdyne
1425 ‐ 1450 Measurement of Endgame Recession in On‐Orbit Performance of the Roll‐Out Solar Affordable Responsive Modular Rocket Engine: Hypersonic Flight Experimentation Vehicle Charring and Non‐Charring Ablative Array on the International Space Station Performance Estimation and Launch Vehicle Peformance and Trajectoray Analysis Materials Capt Christopher Box and Mr. Benjamin Applications Mrs. Alexandra Ortiz, Sierra Lobo, Inc. Mr. Benton Greene, The University of Texas Urioste, Air Force Research Laboratory Mr. Iddrisu Seidu, Air Force Research Laboratory at Austin 1450 ‐ 1515 Manufacturing and Strength Improvements Presentation to be Announced Accuracy and Best Practices for Rocket Engine Testing Presentation to be Announced of Thick Carbon‐Carbon Laminates Mr. Johnnie Engelhardt, Alpha Space Test & Dr. Robert Jensen, Sierra Lobo, Inc. Mr. Benjamin Campanella, Materials Research Alliance Research & Design, Inc. 1515 ‐ 1545 Root Beer Float Break Sponsored by Plasma Processes, LLC
Track One Track Two Track Three Track Four
NSMMS NSMMS CRASTE CRASTE Ground Test & Evaluation, cont. Mission Operations and Experiments Emerging Propulsion Systems, cont. Innovative Test Methodologies and Platforms, in Space, cont. cont. 1545 ‐ 1610 Lessons Learned from Subscale Ox‐Rich Optical Cleaning to Remove Particles from Design of a Reusable Aircraft Concepts for Hypersonics Platforms Designed for Big Data Provisioning with Preburner Testing JWST Mirror Surfaces (REACH) Baseline System Small Satellite Constellations Mr. Philip Rice, Air Force Research Laboratory Ms. Lynette Lobmeyer, Ball Aerospace Mr. Sam Bornstein, SpaceWorks Enterprises, Inc. Dr. Shawana Johnson, Descartes Labs
1610 ‐ 1635 Presentation to be Announced Ultra‐Low Cost, Lightweight, Thermally Rotating Detonation Rocket Engine Development at Presentation to be Announced Mr. Mark Bray, Jacobs Space Exploration Stable SiOC Mirror Components the Air Force Research Laboratory Group Mr. William Easter, Semplastics Dr. Eric Paulson, Air Force Research Laboratory
Printed (4/19/2018) ‐ Pg. 4 1635 ‐ 1700 A New ASTM Test Standard for Open‐Hole Results of the Structural Health Monitoring Presentation to be Announced Presentation to be Announced Tensile Strength of Fiber‐Reinforced Experiment while on the International Space Mr. Dustin Barr, Valley Tech Systems, Inc. Advanced Ceramic Composites Station Dr. Stephen Gonczy, Gateway Materials Dr. Derek Doyle, Air Force Research Technology Laboratory 1700 ‐ 1725 Significantly Improved System Reliability Precision Modulus and Damping as a Stabilized Boron Nanoparticles for Energy Density Presentation to be Announced Assessment using Physics of Failure with Function of Temperature Enhancement of Liquid Fuels Quantified Uncertainty Assessment Mr. Jim Tucker, Southern Research Mr. Bradley Richard, Advanced Cooling Technologies, Mr. Derek DeVries, Orbital ATK Inc.
1800 ‐ 2100 Tuesday Evening Networking Reception Sponsored by Orbital ATK Wednesday, 27 June 2018
0700 ‐ 0745 Speaker Meeting (with Light Breakfast) for Wednesday's Presenters Sponsored by Ultramet 0700 ‐ 0800 Attendee Light Continental Breakfast 0700 ‐ 1730 Registration Open 1200 ‐ 1330 Lunch Break (On Your Own ‐ See Registration Desk for Area Restaurants & Food Trucks) 1330 ‐ 1900 Exhibits and Poster Session Open 1730 ‐ 1900 Poster Session and Networking Reception Sponsored by The Boeing Company 1900 ‐ 2100 Exhibit and Poster Dismantle
Track One Track Two Track Three Track Four
NSMMS CRASTE NSMMS CRASTE Hypersonics Space Access and Propulsion Emerging Materials and Novel Processing Advances in Ground Systems and Range Technologies Operations Lead Organizer: Mr. Miklos Petervary, The Lead Organizer: Mr. John Koenig, Koenig Boeing Company Consulting Lead Organizer: Mr. Eric Becker, Air Force Research Session Chair: Mr. John Micol, NASA Langley Research Co-Organizers: Mr. Craig Ohlhorst, NASA Co-Organizers: Mr. Anthony Brinkley, Bradshaw Laboratory Center Langley Research Center; Mr. Tod Palm, Engineering; Mr. Jerry Brockmeyer, Ultramet; Mr. Co-Organizers: Ms. Kaia David, The Boeing Company; Prof. Co-Chairs: Mr. Barry Hellman, Air Force Research Northrop Grumman Aerospace Systems; Dr. Alan Brown, Aerojet Rocketdyne; Mr. Timothy Greg Hilmas, Missouri University of Science & Technology; Laboratory Brian Sullivan, Materials Research & Design, Inc.; McKechnie, Plasma Processes, LLC; Dr. John Mr. Kenneth Knittel, Raytheon Missile Systems; Dr. Joseph Mr. Andrew Swanson, Air Force Research Shigley, Orbital ATK; and Mr. Robert Taylor, Air Koo, University of Texas at Austin; Dr. Todd Steyer, The Laboratory; and Mr. Brian Zuchowski, Lockheed Force Research Laboratory Boeing Company; Dr. Eric Wuchina, NSWC Carderock Martin Aeronautics Division; and Mr. John Vickers, NASA Marshall Space Flight Session Chairs: Dr. Corky Clinton, NASA Center Session Chairs: Dr. Carmen Carney, Air Force Marshall Space Flight Center and Dr. Shawn Research Laboratory and Dr. Paul Jero, Air Force Phillips, Air Force Research Laboratory Session Chair: Prof. To Be Announced Research Laboratory
0800 ‐ 0805 Session Introduction Session Introduction Session Introduction Session Introduction 0805 ‐ 0830 Presentation to be Announced Hydrocarbon Boost Technology Emerging Materials for Enhanced Performance, Light UAV Based Range to Support National and Civilian Dr. Paul Jero, Air Force Research Laboratory Demonstrator Program Status Weighting and Reduction in Total Cost of Ownership Flight Test & Evaluation Interests Mr. Robert Bernstein, Air Force Research for Space and Missile Applications Mr. Thomas Horvath, NASA Langley Research Center Laboratory Mr. Jeff Grabowski, QuesTek Innovations, LLC 0830 ‐ 0855 Overview and Status of “Joining Methods for Oxidizer‐Rich Preburner Technologies, A Presentation to be Announced Remote Optical Recession Measurement of Orion Affordable Unitized Ceramic Matrix Historical Review Dr. Jerry Lang, NASA Glenn Research Center at Lewis Thermal Protection System Composite Airframes (J‐xHPV)” Program Mr. Cory Gainus, Air Force Research Field Dr. Tait Pottebaum, Opto Knowledge Systems, Inc. Mr. Jonathan Bartley‐Cho, Northrop Laboratory Grumman Corporation
Printed (4/19/2018) ‐ Pg. 5 0855 ‐ 0920 Initial Test Design and Property Results for Impact and Implications of the Use of Integrated Computational Materials Engineering Presentation to be Announced the Joining Method for Affordable Unitized Modular Turbomachinery in Liquid Rocket (ICME) Analysis and Design of Ceramic Matrix Ceramic Matrix Composite Airframes Engines Composite (CMC) Fasteners (JxHPV) Program Mr. Nils Sedano, Air Force Research Mr. Kyle Graham, Materials Research & Design, Inc. Mr. Jacques Cuneo, Southern Research Laboratory 0920 ‐ 0945 Analysis of Ceramic Matrix Composite Pi Hydrocarbon Boost Fuel Kick Pump Characterizing Thermochemical Degradation Behavior Presentation to be Announced Joints for use in C/SiC Aeroshells Component Test Campaign Overview and of Ablative Materials: Using Atomistic Computational Mr. Nestor Voronka, M42 Technologies Mr. William O'Connor, Materials Research & Results Tools and Experiments Design, Inc. Mr. Phuoc Hai Tran, Air Force Research Dr. Srujan Rokkam, Advanced Cooling Technologies, Inc. Laboratory 0945 ‐ 1015 Break
Track One Track Two Track Three Track Four
NSMMS CRASTE NSMMS CRASTE Hypersonics, cont. Space Access and Propulsion, cont. Emerging Materials and Novel Processing High Altitude/Sub-Orbital Experiments Technologies, cont. Session Chair: Mr. Nickolas Demidovich, FAA Commercial Space Transportation Co-Chair: Mr. Robert Taylor, Air Force Research Laboratory 1015 ‐ 1020 Announcements Announcements Announcements Announcements 1020 ‐ 1045 CMC Single Lap Shear Joint Post‐Test Additively Fabricated Thrust Chambers for Simulating the Response of a Multidirectional Aerospike Engine Sounding Rocket Performance, Analysis Modular Rocket Applications Composite Material using Machine Learning, Mass, and Trajectory Requirements Analysis Mr. Jonathan Boston, Air Force Research Mr. Iddrisu Seidu, Air Force Research Statistical Algorithms, and the Enhanced Binary Model Mr. Nils Sedano, Air Force Research Laboratory Laboratory Laboratory Mr. Shane Flores, ATA Engineering, Inc.
1045 ‐ 1110 Presentation to be Announced Thermal Barrier Coatings for Thrust Experimental Characterization and Physics‐Based Presentation to be Announced Mr. Brian Zuchowski, Lockheed Martin Chambers Modeling of the Temperature‐Dependent, Diffuse Mr. Nickolas Demidovich, FAA Commercial Space
Aeronautics Mr. Gabe Mendez, Air Force Research Reflectance of Plasma‐Sprayed Nd2Zr2O7 in the Near to Transportation Laboratory Short‐Wave Infrared Dr. Michael Brupbacher, Johns Hopkins University, Applied Physics Laboratory 1110 ‐ 1135 Analysis and Testing of CMC Fasteners for Fabrication and Testing of Affordable 2D Characterization of SiC Fibers and Minicomposites to Presentation to be Announced Hypersonic and Other Flight Vehicles Carbon‐Carbon Extensions for Propulsion Improve CMC Durability Ms. Leslie Weller, Materials Research & Applications Dr. Amjad Almansour, NASA Glenn Research Center Design, Inc. Dr. John Shigley, Orbital ATK Flight Systems Group 1135 ‐ 1200 Program Review for the AFRL TRIAD CMC Hydrocarbon Boost Material Process Recertification and Equivalency Test Results for Presentation to be Announced Fastener Characterization Program Experiments and Manufacturing Technology IM7/8552‐1 following Extended Freezer Storage Mr. Jacques Cuneo, Southern Research Demonstrators Dr. Sandi Miller, NASA Glenn Research Center Mr. Robert Taylor, Air Force Research Laboratory 1200 ‐ 1330 Lunch Break (On Your Own ‐ See Registration Desk for a list of Area Restaurants & Food Trucks)
Track One Track Two Track Three Track Four
Printed (4/19/2018) ‐ Pg. 6 NSMMS NSMMS NSMMS CRASTE Hypersonics, cont. Space Access and Propulsion Emerging Materials and Novel Processing GO Launcher 1 Technologies, cont. Lead Organizer: Mr. Timothy McKechnie, Plasma Session Chair: Mr. Barry Hellman, Air Force Research Processes, LLC Laboratory Co-Organizers: Mr. Anthony Brinkley, Bradshaw Co-Chair: Mr. Lance Fife, Space Dynamics Laboratory Engineering; Mr. Jerry Brockmeyer, Ultramet; Mr. Alan Brown, Aerojet Rocketdyne; Mr. John Koenig, Koenig Consulting; Dr. John Shigley, Orbital ATK; and Mr. Robert Taylor, Air Force Research Laboratory
Session Chairs: Dr. Corky Clinton, NASA Marshall Space Flight Center and Dr. Shawn Phillips, Air Force Research Laboratory
1330 ‐ 1335 Announcements Session Introduction Announcements Session Introduction 1335 ‐ 1400 Development of Design Data for Expansion of Boeing Ablative Material Multi‐Material Integrated Knit Thermal Protection Air Force Airworthiness Concerns for an Air‐Dropped Mechanically Fastened Apertures Capability Envelope via Arc Jet Exposure Mrs. Amoret Chappell, Boeing Research & Technology Liquid Rocket Lt Malia Stephens, Air Force Research under NASA Public Private Partnership Mr. Barry Hellman, Air Force Research Laboratory Laboratory Ms. Michele Chaffey, The Boeing Company
1400 ‐ 1425 A/N720 Push‐Through Test and Analysis Presentation to be Announced Automated Fiber Placement and Associated Ground and Flight Test Results for a Modern Comparison Mr. Victor Arrieta, Ultramet Technologies at NASA Langley Research Center Hypersonic Testbed Mrs. Jennifer Toney, Air Force Research Ms. Dawn Jegley, NASA Langley Research Center Mr. A.J. Piplica, Generation Orbit Launch Services, Laboratory Inc. 1425 ‐ 1450 Design, Fabrication and Testing of Candidate Ultralight Composite Cryotank Validation Advances in Coating of LCVD‐Manufactured SiC Fibers Captive‐Carry Flight Demonstration of an Inert Test 3D Reinforcement Methods for Enhanced Dr. Eric Jacob, Gloyer‐Taylor Laboratories, LLC Dr. Shay Harrison, Free Form Fibers Rocket using a Business Jet as an Air Launch Interlaminar Strength Oxide‐Oxide Materials Platform for Antenna Window Applications on Mr. Eric Miller, NASA Armstrong Flight Research Hypersonic Vehicles Center Ms. Kerry Howren, Materials Research & Design, Inc. 1450 ‐ 1515 Integrated Design of Ox‐Ox CMC TPS/RF Innovative Manufacturing of Launch Vehicle Presentation to be Announced Flutter Clearance for Captive Carry Flight Testing of Window for Hypersonics Structures using Integrally Stiffened Cylinder Dr. Jeremy Watts, Missouri University of Science and the GOLauncher 1 Inert Test Article Mounted on C‐ Mr. Christopher Garcia, Applied Thin Films, (ISC) Technology Technology 20A Aircraft Inc. Mrs. Marcia Domack, NASA Langley Research Mrs. Natalie Spivey, NASA Armstrong Flight Research Center Center 1515 ‐ 1545 Break
Track One Track Two Track Three Track Four
NSMMS NSMMS NSMMS CRASTE Hypersonics, cont. Space Access and Propulsion, cont. Emerging Materials and Novel Processing Emerging Entry, Descent, and Recovery Technologies, cont. Systems and Technologies
Session Chair: Mr. Gautham Ramachandran, Lockheed Martin Co-Chair: Mr. Mark Fisher, Dynetics, Inc. 1545 ‐ 1550 Announcements Session Introduction Announcements Session Introduction 1550 ‐ 1615 High Temperature RF Frequency Selective A 15,000 Lb. ElectroCycle Engine for Developing Hybrid Organic/Inorganic Boron‐Based A Patented Approach for a Boost Glide Trajectory Aperture Materials Scalable, Flexible, Modular Space Launch Materails Mr. Barry Hellman, Air Force Research Laboratory Mr. Keith Caruso, Johns Hopkins University, Mr. Patrick Bahn, TGV Rockets, Inc. Ms. Sam Yruegas, Baylor University Applied Physics Laboratory
Printed (4/19/2018) ‐ Pg. 7 1615 ‐ 1640 Maturing Alternate 2D C‐C for Hot Structural Solar Electric Propulsion Architectural Affordable Elastomeric Insulation Material for Solid Presentation to be Announced Applications Options for Future Applications on Ball Rocket Motors with Improved Ablation Resistance Mr. John Kelly, NASA Armstrong Mr. Wei Shih, Allcomp, Inc. Configurable Platforms Prof. Joseph Koo, University of Texas at Austin Dr. Paul Lightsey, Ball Aerospace 1640 ‐ 1705 Presentation to be Announced Miniature Micro‐Hollow Cathode Thruster Development of New Rocket Engine Liner Materials Presentation to be Announced Mr. Dejan Nikic, Boeing Aerospace Applied Based on Copper Alloys with Diamond Particle Physics Additions Dr. Biliyar Bhat, NASA Marshall Space Flight Center
1705 ‐ 1730 Hypersonic Wing Leading Edge Material Presentation to be Announced Analysis of the Effects of Inorganic Constituents on Presentation to be Announced Coating Evaluation Program Dr. James Grossnickle, Boeing Aerospace Solid Rocket Motor Insulation Performance Mrs. Heather Bates, Integration Innovation, Applied Physics Ms. Shannon McDade, Jacobs Space Exploration Group Inc (i3) 1730 ‐ 1900 Poster Session and Networking Reception Sponsored by The Boeing Company Thursday, 28 June 2018
0700 ‐ 0745 Speaker Meeting (with Light Breakfast) for Thursday's Presenters 0700 ‐ 0800 Attendee Light Continental Breakfast 0700 ‐ 1600 Registration Open 1200 ‐ 1330 Lunch Break (On Your Own ‐ See Registration Desk for Area Restaurants & Food Trucks)
Track One Track Two Track Three Track Four
NSMMS NSMMS NSMMS CRASTE Hypersonics Additive Manufacturing for Space and Missiles & Missile Defense Responsive Access for Pico/Nano/Small Missile Materials Payloads Lead Organizer: Mr. Miklos Petervary, The Lead Organizer: Mr. Jason Calvert, USASMDC/ARSTRAT Boeing Company Lead Organizer: Dr. Russell Lipeles, The Co-Organizers: Dr. Douglas Deason, Missile Defense Session Chair: Mr. Lance Fife, Space Dynamics Co-Organizers: Mr. Craig Ohlhorst, NASA Aerospace Corporation Agency; Mr. Robert Haack, Missle Defense Agency; Mr. Laboratory Langley Research Center; Mr. Tod Palm, Co-Organizers: Mr. Eric Becker, Air Force Paul Marchol, Aerojet Rocketdyne; Mr. Curtis Martin, NSWC Co-Chair: Mr. Robert Seibold, The Aerospace Corporation Northrop Grumman Aerospace Systems; Dr. Research Laboratory; Dr. Corky Clinton, NASA Carderock Division; Dr. Bruce Moylan, U.S. Army AMRDEC; Brian Sullivan, Materials Research & Design, Inc.; Marshall Space Flight Center; Dr. Suraj Rawal, and Dr. Gerald Russell, i3 Corporation Mr. Andrew Swanson, Air Force Research Lockheed Martin Space Systems; and Dr. Todd Laboratory; and Mr. Brian Zuchowski, Lockheed Steyer, The Boeing Company Session Chair: Dr. Shari Feth, Missile Defense Agency Martin Aeronautics Session Chairs: Dr. Marie Cox, Air Force Session Chairs: Mr. Jesse Maxwell, Naval Research Laboratory and Dr. Jitendra Joshi, Research Laboratory and Mr. Craig Ohlhorst, NASA Headquarters NASA Langley Research Center 0800 ‐ 0805 Session Introduction Session Introduction Session Introduction Session Introduction 0805 ‐ 0830 Hypersonic Structurally Integrated CMC High‐Temperature Mechanical Behavior of Missile Defense Investments in Advanced Materials Presentation to be Announced Skins (HySICS): Subelement Analysis, Inconel 718 Fabricated by Selective Laser Technology Mr. Warren Frick, Orbital ATK Fabrication, Planned Testing, and Wing Root Melting Dr. Douglas Deason, Missile Defense Agency Design Revisions Dr. David Witkin, The Aerospace Corporation Mr. Daniel Howren, Materials Research & Design, Inc. 0830 ‐ 0855 Ceramic Technologies for Shape Stable Delivering a Titanium Impeller for Rocket EO/RF Sensor Dome and Window Roadmap Vector Launch Vehicles for Responsive Access to Hypersonic Monocoque Aeroshells Engines made by Powder Bed Fusion Mr. Douglas Freitag, US Advanced Ceramics Association Space Dr. Frederick Lauten, Physical Sciences, Inc. Additive Manufacturing Mr. Gregory Orndorff, Lector Launch, Inc. Dr. John Porter, UES, Inc.
Printed (4/19/2018) ‐ Pg. 8 0855 ‐ 0920 Manufacturing of Carbon‐Carbon Delivering an Alloy 718 Kick Inducer for High Temperature Pre‐Ceramic Polymers for Presentation to be Announced Composites for Hypersonic Applications: A Rocket Engines made by Laser Powder Bed Hypersonic Applications Mr. Jason Budinoff, bSpace Corporation Defense Manufacturing Science & Fusion Additive Manufacturing Mr. John Dignam, Mentis Sciences, Inc. Technology Initiative Dr. John Porter, UES, Inc. Dr. Karla Strong, Air Force Research Laboratory 0920 ‐ 0945 Multi‐Layer Metal Insulation: An Integrated Presentation to be Announced Presentation to be Announced Presentation to be Announced Thermal Protection System and Aero‐ Mr. Derek Guyton, Barber‐Nichols, Inc. Mr. Mark Glenn, Missile Defense Agency Presenter to be Announced Structure for High Mach Vehicles Mr. Robert Hardesty, Peregrine Falcon Corporation
0945 ‐ 1015 Break Sponsored by Ball Aerospace
Track One Track Two Track Three Track Four
NSMMS NSMMS NSMMS CRASTE Hypersonics, cont. Additive Manufacturing for Space and Missiles & Missile Defense, cont. Reducing Cost and Increasing Safety Missile Materials, cont. Session Chair: Mr. Robert Seibold, The Aerospace Corporation Co-Chair: Mr. John Micol, NASA Langley Research Center 1015 ‐ 1020 Announcements Announcements Announcements Session Introduction 1020 ‐ 1045 Aerothermal Mitigation and Materials Experiences in Additive Manufacturing Long Duration Extinguishable Solid DACS TRL‐6 Preliminary Hazard Analysis of the Aircraft Liquid Requirements for Hypersonic Waveriders Technologies for Aerospace Applications Maturation Launch Vehicle System Mr. Jesse Maxwell, U.S. Naval Research Mr. David Waller, Ball Aerospace Mr. Russell Carlson, Valley Tech Systems, Inc. Mr. Nils Sedano, Air Force Research Laboratory Laboratory 1045 ‐ 1110 Performance Analysis of a Hypersonic Additive Manufacturing of High Performance Presentation to be Announced Presentation to be Announced Scramjet Engine with a Morphable Alloys via Nanofunctionalization Mr. Christopher Smith, Valley Tech Systems, Inc. Waverider Inlet Dr. Jake Hundley, HRL Laboratories Dr. Gabriel Goodwin, U.S. Naval Research Laboratory 1110 ‐ 1135 NRL Structural Efforts on the Morphing Metal Additive Manufacturing of Aerospace Advanced Rocket Technology Solid Post‐Boost Control Presentation to be Announced Hypersonic Waverider Oil Cooler Part Families System Trades for Lower Cost and Higher Performance Dr. Austin Phoenix, U.S. Naval Research Mr. Adam Hicks, University of Dayton Mr. Adam Ebnit, Air Force Research Laboratory Laboratory Research Institute 1135 ‐ 1200 NRL Structural Efforts on the Morphing Status of the Selective Laser Melting of a W‐ Presentation to be Announced Presentation to be Announced Hypersonic Waverider: Surface Thickness Re Alloy Mr. Michael Libeau, Navy Optimization to Improve Morphing Surface Dr. Joseph Sims, ASRC Federal Astronautics, Accuracy LLC Mr. Brandon Powell, U.S. Naval Research Laboratory 1200 ‐ 1330 Lunch Break (On Your Own ‐ See Registration Desk for a list of Area Restaurants & Food Trucks)
Track One Track Two Track Three
NSMMS NSMMS NSMMS Hypersonics, cont. Additive Manufacturing for Space and Missiles & Missile Defense, cont. Missile Materials, cont.
1330 ‐ 1335 Announcements Announcements Announcements
Printed (4/19/2018) ‐ Pg. 9 1335 ‐ 1400 Coupled Aero‐Thermal‐Structural Design Additive Manufacturing as a Tool for Rapid Thermal Conductivity Round Robin Testing Methodologies and Technologies Throughput of Composite Materials Mr. Robert Haack, Missile Defense Agency Development for Reusable Hypersonic Dr. Quinn McAllister, San Diego Composites Vehicle Structures ‐ A Program Overview Dr. Brett Hauber, University of Dayton Research Institute 1400 ‐ 1425 In‐Plane Biaxial Testing of a Quasi‐Isotropic 5‐Axis Continuous Carbon Fiber 3D Printing Update on the Development of Material Systems for C‐C Composite for Weight Reduction High Performance Solid Rocket Motors Mr. James Hawbaker, Southern Research Mr. Ryan Dunn, Mantis Composites, Inc. Dr. Sandra Tomczak, Air Force Research Laboratory
1425 ‐ 1450 Multiaxial Loading of CMCs ‐ Program Binder Jet Additive Manufacturing of a Presentation to be Announced Overview Prototype Silicon Carbide Optical Support Dr. Daniel Butts, Plasma Processes, LLC Dr. Marlana Goldsmith, The Boeing Company Structure Mr. Jesse Blacker, The ExOne Company 1450 ‐ 1515 Advanced Manufacturing of Oxide Ceramic Thermomechanical Optimization of Cellular Low‐Cost High Density C‐C for Propulsion Applications Composites Ceramic Materials Mr. Wei Shih, Allcomp, Inc. Ms. Mary Litwinski, The Boeing Company Mr. Devlin Hayduke, Materials Sciences Corporation 1515 ‐ 1545 Break
Track One Track Two Track Three
NSMMS NSMMS NSMMS Hypersonics, cont. Additive Manufacturing for Space and Missiles & Missile Defense, cont. Missile Materials, cont. 1545 ‐ 1550 Announcements Announcements Session Introduction 1550 ‐ 1615 Load Bearing Thermal Protection Structure MIDAS: Material Informed Digital Design Recent Upgrades and Additions to the Transient for Hypersonic Flight Demonstration for Additive Structures Thermal Analysis Software Toolset (TTAS) Mr. Willliam Higginson, Materials Research & Dr. Marie Cox, Air Force Research Laboratory Dr. William Coirier, Kratos Defense & Rocket Support Design, Inc. Services, Inc. 1615 ‐ 1640 Presentation to be Announced Presentation to be Announced Transient Thermal Analysis of the HIFiRE‐5b Flight Test Mr. Brian Zuchowski, Lockheed Martin Mr. Peter Markopoulos, ASRC Federal Dr. William Coirier, Kratos Defense & Rocket Support Aeronautics Astronautics, LLC Services, Inc.
1640 ‐ 1705 Hypersonic Panel Modal Analysis and Influence of Filament Moisture Content on Presentation to be Announced Modeling the Quality and Mechanical Performance of Dr. Conrad Patton, CFD Research Corporation Mr. Samuel Tilmann, Air Force Research FDM ULTEM 9085 Laboratory Dr. David Witkin, The Aerospace Corporation
1705 ‐ 1730 Combined Thermal/Mechanical/Acoustic Presentation to be Announced Presentation to be Announced Loads Testing of Hypersonic Vehicle Fuselage Ms. Kristin Morgan, NASA Marshall Space Panel Flight Center Mr. Travis Wyen, Air Force Research Laboratory
1730 ‐ 1735 Grand Prize Give‐Away Sponsored by Dynetics Adjourn
Printed (4/19/2018) ‐ Pg. 10