Data Sheet 9360000571D, 86010165

Ericsson Antenna Technology Germany GmbH • Klepperstraße 26 • 83026 Rosenheim • Germany

Ericsson Antenna Technology Germany GmbH Klepperstraße 26 83026 Rosenheim Kathrein Mobile Germany Phone: +49 8031 184-0 Fax: +49 8031 184-306 Communication www.kathrein.com Company Responsible: – now part of Markus Feld VAT Reg. No.: DE 324 954 029 Tax ID No.: 103/5725/3930

Ericsson BNP Paribas IBAN: NL05 BNPA 0227 7141 56 BIC: BNPANL2AXXX Zum 1. Oktober 2019 ist die Kathrein Mobile Communication die Ericsson Antenna Technology Germany GmbH (im Folgenden auch „EAG“), eine mit Gesellschaftsvertrag vom 16. Januar 2019 neu gegründete Gesellschaft mit beschränkter Haftung (GmbH) nach deutschem Recht mit Sitz in Rosenheim (Geschäftsanschrift: Prinzenallee 21, 40549 Düsseldorf). EAG ist im Handelsregister B des Amtsgerichts Traunstein unter der Nr. HRB 27988 eingetragen und hat ein Stammkapital von derzeit EUR 2.000.000,00. EAG wird vertreten durch den Geschäftsführer Markus Feld. Alleinige Gesellschafterin von EAG ist die Telefonaktiebolaget LM Ericsson (publ), eine börsennotierte Aktiengesellschaft nach schwedischem Recht.

Die neuen Firmendaten lauten seither wie folgt: Ericsson Antenna Technology Germany GmbH Klepperstraße 26 83026 Rosenheim, Germany UST-Ident-Nr: DE 324 954 029 Steuer-Nr.: 103/5725/3930

As of 1 October 2019, Kathrein Mobile Communication is Ericsson Antenna Technology Germany GmbH (hereinafter also referred to as “EAG”), a limited liability company under German law, newly established by articles of association dated 16 January 2019, with its head office in Rosenheim (business address: Prinzenallee 21, 40549 Düsseldorf, Germany). EAG is registered in the commercial register, section B, of Amtsgericht Traunstein (district court Traunstein) under the number HRB 27988 and has a share capital of currently EUR 2,000,000. EAG is represented by managing director Markus Feld. The sole shareholder of EAG is Telefonaktiebolaget LM Ericsson (publ), a listed stock corporation under Swedish law.

The new company data are as follows:

9360000644 Ericsson Antenna Technology Germany GmbH Klepperstraße 26 83026 Rosenheim, Germany VAT Reg. No.: DE 324 954 029 Tax ID No.: 103/5725/3930

Read more at: ericsson.com/en/networks/kathrein General Instructions for Feeder Line Installation for Antennas with 4.3-10 Connectors

Please note: In order not to damage the interfaces, please make sure that only the right tools are used. Tighten the feederline connector interfaces solely by using a common torque-wrench with a suitable wrench width.

Description of bottom end cap (exemplary picture): Ventilation hole

Left/right marking of array positions

FlexRET module

4.3-10 female Colour coding: connector Correlation of each RF input to: – the frequency range – the polarization – the array position

Installation of feeder line cables: Installation of Smart Bias Tees: Tighten the 4.3-10 cable connectors within a torque range of If directly mounted on the antenna, the weight of one Smart Bias max. 15 Nm depending on connector manufacturers’ specifications. Tee must not exceed 440 g | 0.96 lb per antenna connector. The recommended tightening torque of 4.3-10 connectors is It is recommended to only use Kathrein Smart Bias Tees with 5–8 Nm. 4.3-10 connector (type no. 78211590, …, -597). For the FlexRET installation, please follow the FlexRET installation instruction on the data sheet. Hold the Smart Bias Tee housing securely while mounting and tightening the cables. No lateral pressure shall be applied on the Smart Bias Tee when mounting it directly on an antenna neither during the mounting process nor in operational mode. 936.5369a | Subject to alteration.

Any previous data sheet issues have now become invalid. Page 1 of 1 KATHREIN SE | Anton-Kathrein-Straße 1–3 | 83022 Rosenheim, Germany | Phone +49 8031 184-0 | www.kathrein.com | [email protected] 936.0000571d | Subject to alteration. Ericsson Antenna Technology Germany GmbH|Klepperstraße 26 |83026Rosenheim, Germany|+498031 184-0|www.kathrein.com |[email protected] Any previous datasheetissues have nowbecome • •Single RETs orMultiRETdisplayed •Compliant to3GPP/AISG2.0–3ready A flexible,integrated solutionfor adjusting theelectricaldowntiltofKathrein FlexRETantennas. FlexRET Packing size Weight Housing material Lightning protection Protection class Temperature range Adjustment cycles (full range) Adjustment time Hardware interfaces Connectors Power consumption Input voltagerange Ex factory Operates as Logical interfaceexfactory Protocols Type No. This deviceisnotcompatibletoantennaswithFlexRET86010153or (H xWD) Dimensions (H xWD) included inthescope ofsupply. (e.g. CSG351234- manually addressed, theserialnumberhastobeextendedbycorresponding colourcoding In general, theaddressing oftheFlexRETisautomatically performed. OnlyincasetheFlexRETis Please note: Optional: Scope ofsupply: Certification: EU-RED: Standards: after poweronautomatically. Itisnotnecessarytoconfigure theFlexRETmanually. If theFlexRETofanantennahastobereplaced, theFlexRETgetsinformationstored intheantenna The FlexRETneedstobepowered byaLPS(LimitedPowerSource, Class:P2)according toIEC/EN62368-1. Please contactKathrein forfurtherinformation. setting, thentheFlexRETmustbeswitchedtoappropriate standard ofthePrimarybefore installation. If thePrimarywhichcontrols theFlexRETsystemdoesnotsupportdefaultex-factoryinterface Please note: Non-observance candamagetheantennaandRETdevice. devices cannotbereplaced by86010165. – AntennatiltconsolidationsforRETcontrol ofseveral arrays byoneRET-subunit – Antennasharing-assignmentofcertainRET-subunits toRET-ports Individual user-specificconfiguration possible:

). The respective informationcanbe foundonthesitedocumentation whichis Detailed informationisgiveninthe datasheetofthePortExtender. operate FlexRetwith exactly2BTSwhilemaintainingthedaisychaincapability. Port Extender Detailed informationisgiveninthe datasheetoftheGenderAdapter. port inorder tooperate one FlexRetwithexactly2BTS. Gender Adapter independent NodeB.Operation inAISG2.0 modeonly. interfaces atone Site SharingAdapter FlexRET CE, FCC conformity isavailableatthefollowinginternetaddress: http://www.kathrein.com com Hereby, KATHREIN SEdeclares thattheradio equipmenttype86010165isin EN 50364(Health) ETSI EN300330(Radioequipment) ETS 300019-1-4(Environmental) ETSI EN301489-3(EMI) ETSI EN301489-1(EMI) EN 60950-22(Safety–Equipmentinstalledoutdoor) EN 62368-1(Safety) inches inches mm mm sec °C W lb g V pliance withDirective 2014/53/EU. The fulltextoftheEUdeclaration of 2 x8pinconnectoraccording toIEC60130-9;according toAISG-C485 (86010163)toconverttheexisting AISGinputandoutputinorder to Profile: Aluminumanodized;cover:diecastcoated (86010162)toconverttheAISGout(female)anin(male) antenna orsite.Makesitpossibletooperate withmore thanone

Daisy chainin:male;out:female (86010154or86010155)tocreate independentlogical compliant to3GPP/AISG2.0 8 kA(8/20µs)according toIEC61000-4-5

(typically, dependingonantennatype) power supply(pin6);DCreturn (pin7); Typically <1;10(motoractivated) invalid. according toAISG/3GPP AISG interface(eachpin) Single RETs orMultiRET RS 485A/B(pin5,pin3); •Pre-configured •Daisy Chainfeasibility 86010165 2.5 kA(10/350µs) 3GPP /AISG2.0 IP 24(installed) 10 ...30(pin6) 245 x93102 9.6 x3.64 5.6 x2.82 142 x7151 Single RETs −40 …+60 > 50,000 0.77 350 40

–AISG3ready

V01 . These FlexRET extension

1538 | 60.6 2) 1386 | 54.6 in mm|inches All dimensions 4) 11|0.4 3) 142|5.6 2) 150|5.9 1) 22|0.9

3) 1) 4) 698–960 14.7dBi 2°–14° 65° |2x698–96014.6dBi2x1427–269017.6dBi1695–269017.7dBi 65°

1499 | 59.0 R1 X 800442004 698–960 14.6dBi 2°–14° 65° R2 X 1427–2690 17.8dBi 2°–12° 65° Y1 X * notapplicableforL-band Values basedonNGMN-P-BASTA (version 10.0)requirements. Packing Size Scope ofSupply Weight Mounting Category of Height /WidthDepth Max. WindVelocity Wind Speed:150km/h) Wind load(atRated Adjustment Mechanism Connector Position Input Mechanical specifications for theAntenna Max. EffectivePower Polarization Passive Intermodulation Interband Isolation Return Loss VSWR Impedance Electrical specifications,allports 1695–2690 17.7dBi 2°–12° 65° Y2 X Hardware 1427–2690 17.6dBi 2°–12° 65° Y3 X inches inches N |lbf km/h mph mm mm kg dBc lb dB dB W Ω ° < -153(2x43dBmcarrier)* Maximal: Frontal: continuously adjustable clamps for55–115mm| 2.2–4.5 inchesdiameter 72.9 /81.6(clampsincl.) 32.9 /37.1(clampsincl.) 1000 (at50°Cambient 800442004 Page1of2 Panel, FlexRETand 10 x4.3-10female 1635 /495250 1499 /448164 64.4 /19.59.8 XM (X-Medium) 59.0 /17.66.5 temperature) −45, +45 FlexRET, bottom < 1.5 > 25 > 14 150 241 50 700 |157 525 |118 Layout ofinterface: 10-Port Antenna Accessories (includedinthescopeofsupply) Accessories (order separately ifrequired) Ericsson Antenna Technology Germany GmbH|Klepperstraße 26 | 83026Rosenheim, Germany|+498031 184-0|www.kathrein.com |[email protected] Correlation Table 86010165 85010111 85010097 Type No. 85010110 86010155 86010154 86010162 86010163 229.2 | 9.0* Page 2of800442004 Frequency range 1695–2690 MHz 1427–2690 MHz 1427–2690 MHz 164 | 6.5* 698–960 MHz 698–960 MHz 2 clamps 1 downtiltkit Site SharingAdapter Site SharingAdapter Gender Adapter Port Extender FlexRET 2 clamps Description Array R2 Y3 Y2 R1 Y1 3GPP /AISG2.0 – AISG3ready Compliant to Mast diameter:55–115|2.2–4.5 Mast diameter:110–220|4.3–8.7 Downtilt angle:0°–10° 6-way (seefigure below) 3-way (seefigure below) FlexRET module To beused incombinationwiththe Connector /Ports 9–10 5–6 3–4 7–8 1–2 mm |inches Remarks Left 311 | 12.2 221 | 8.7 142 | 5.6 131 | 5.2 448 |17.6* 150 | 5.9 R1 Y1 approx. kg|lb Center 0.045 |0.099 Y2 0.16 |0.35 9.4 |20.7 8.5 |18.7 4.5 |9.9 0.7 |1.5 Weight 1.4 |3.1 Any previous datasheet issueshavenowbecome Right R2 Y3 Units per antenna 1 1 1 1 1 1 invalid.

94 | 3.7

136 | 5.4

936.0000648a | ngmn 04.32.02.00 | Subject to alteration. Mounting Hardware Clamps (Wind Load Category “XM”)

Clamps 55–115mm XM Type No. 85010111 Suitable for mm 55 – 115 mast diameter inches 2.2 – 4.5 Scope of supply 2 x clamps Material – Clamp Hot-dip galvanized steel – Screws Hot-dip galvanized steel – Nuts Stainless steel Weight kg 4.5 lb 9.9

Torque Torque MA = 40 Nm MA = 30 Nm F

∅ C

Attention! D F Square of the screw must be positioned in the square hole A B before tightening the nut.

A B C D E F

mm 200 75 55 – 115 142 130 (25) inches 7.9 2.9 2.2 – 4.5 5.6 5.1 (1) 936.0000048b | Subject to alteration. Please note: Kathrein does not recommend to use counter nuts.