No liability isaccepted for errors or misprints. We reserve the rightto modify orimprove thedesign ormanufacture and equipment described of machinery herein andto alter specifications accordingly withoutpriornotice. 8212 Pischelsdorf, Austria Rosendahl Nextrom GmbH Space requirement Line geared for GENERAL LINEDATA Insulation material Cross section oftheconductor 1kV DATA INSULATION MODELV for Material outer layer (semicon) Material insulation Material innerlayer (semicon) Cross section oftheconductor Cable standard DATA INSULATION MODEMVupto 20kV F T +43 31135100-59 +43 3113 5100-0 PE, PVC, XLPE-VISICO, HFFR, LSOH 16 -300mm Borealis LE0540, Borealis LE0574 Borealis LE4421M +LE4431M Borealis LE0540 50 -1,000 mm IEC 60502 /CENELEC HD620 110 x87m 300 m/min 2 [email protected] 2 COMBINED LV/MV

PR 1009410E/02.20 insulation line Combined LV/MV RM-A For awideproduct range ononesingle line www.rosendahlnextrom.com EXCELLENT PRODUCT QUALITY

COMBINED LV/MV INSULATION LINE

MV products are produced with 3 extruders and a triple-layer crosshead.

Meeting the demand for increased flexibility, APPLICATIONS high productivity and excellent product quality, Rosendahl offers combined LV (low voltage) and MV (medium voltage) Low Voltage (LV) and medium voltage (MV) By using appropriate raw materials and specifically insulation lines. products in a “Multi-Line” designed Rosendahl machinery, cable makers are in the position to offer a wide range of high-end prod- ucts to the market. In order to enable cable manufacturers to produce a large product range using Limited investment costs in new extrusion equipment the same production facilities, the RM-A and no special requirements for factory design are big processes cables from standard 1kV to 20 Besides LV products in various conductor and advantages to the cable manufacturer. kV on one line. isolation combinations, production of MV Individual Dosing Stations products up to 20 kV is possible. By using special material handling, trouble- free production with a low amount of scrap and a very short downtime of the line during product changeovers is guaranteed. Rosendahl Multi-Line-Methodmulti-line method ClassicalClassical CV method MV products, according to Rosendahl methods, are proven pursuant to many standards and show bet- 200 This line does not have any limitation on ter test results compared to some peroxide-based standard LV production. 180 homopolymer products produced on standard CV 160 lines. Products are manufactured with the same 140 The space requirement of such a line is just half that of a high-end CCV extrusion line, and the equipment quality and performance as on a dedicated 120 can be installed on one floor. extrusion line. 100

Factor in % Factor 80 Due to the fact that standard plant water is used for

Factor Output in % Factor cooling instead of nitrogen or steam, production costs The space requirement of our line is just 60 half that of a high-end CCV extrusion line. can be reduced. 40 20 0 CAPEXCAPEX Index OPEXOPEX Index SpaceSpace Require - ProductProduct Vari - ComparisonIndex of a “Multi-Line-Method”Index Requirement from RosendahlVariety with a

Comparison of a “multi-line method” from Rosendahl with a classical CV method