Erase — Erase a Disk ﬁle

Total Page：16

File Type：pdf, Size：1020Kb

Title stata.com erase — Erase a disk file Syntax Description Remarks and examples Also see Syntax erase j rm " filename" Note: Double quotes must be used to enclose filename if the name contains spaces. Description The erase command erases files stored on disk. rm is a synonym for erase for the convenience of Mac and Unix users. Stata for Mac users: erase is permanent; the file is not moved to the Trash but is immediately removed from the disk. Stata for Windows users: erase is permanent; the file is not moved to the Recycle Bin but is immediately removed from the disk. Remarks and examples stata.com The only difference between Stata’s erase (rm) command and the DOS DEL or Unix rm(1) command is that we may not specify groups of files. Stata requires that we erase files one at a time. Mac users may prefer to discard files by dragging them to the Trash. Windows users may prefer to discard files by dragging them to the Recycle Bin. Example 1 Stata provides seven operating system equivalent commands: cd, copy, dir, erase, mkdir, rmdir, and type, or, from the Unix perspective, cd, copy, ls, rm, mkdir, rmdir, and cat. These commands are provided for Mac users, too. Stata users can also issue any operating system command by using Stata’s shell command, so you should never have to exit Stata to perform some housekeeping detail. Suppose that we have the file mydata.dta stored on disk and we wish to permanently eliminate it: . erase mydata file mydata not found r(601); . erase mydata.dta . Our first attempt, erase mydata, was unsuccessful. Although Stata ordinarily supplies the file extension for you, it does not do so when you type erase. You must be explicit. Our second attempt eliminated the file. Unix users could have typed rm mydata.dta if they preferred. 1 2 erase — Erase a disk file Also see [D] cd — Change directory [D] copy — Copy file from disk or URL [D] dir — Display filenames [D] mkdir — Create directory [D] rmdir — Remove directory [D] shell — Temporarily invoke operating system [D] type — Display contents of a file [U] 11.6 Filenaming conventions.

Copy Link

Recommended publications

Servo Motor EMMT-AS-60-L-LS-RM Part Number: 5242213
Servo motor EMMT-AS-60-L-LS-RM Part number: 5242213 Data sheet Feature Value Short type code EMMT-AS Ambient temperature -15 °C ... 40 °C Note on ambient temperature Up to 80°C with derating of -1.5% per degree Celsius Max. installation height 4000 m Note on max. installation height As of 1,000 m: only with derating of -1.0% per 100 m Storage temperature -20 °C ... 70 °C Relative air humidity 0 - 90% Conforms to standard IEC 60034 Temperature class as per EN 60034-1 F Max. winding temperature 155 °C Rating class as per EN 60034-1 S1 Temperature monitoring Digital motor temperature transmission via EnDat® 2.2 Motor type to EN 60034-7 IM B5 IM V1 IM V3 Mounting position optional Degree of protection IP40 Note on degree of protection IP40 for motor shaft without rotary shaft seal IP65 for motor shaft with rotary shaft seal IP67 for motor housing including connection components Concentricity, coaxiality, axial runout to DIN SPEC 42955 N Balance quality G 2.5 Detent torque <1.0% of the peak torque Storage lifetime under nominal conditions 20000 h Interface code, motor out 60P Electrical connection 1, connection type Hybrid plug Electrical connection 1, connector system M23x1 Electrical connection 1, number of connections/cores 15 Electrical connection 1, connection pattern 00995913 Pollution degree 2 Note on materials RoHS-compliant Corrosion resistance class CRC 0 - No corrosion stress LABS-Conformity VDMA24364 zone III Vibration resistance Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 10/2/21 - Subject to change - Festo AG & Co.
[Show full text]
Windows Command Prompt Cheatsheet
Windows Command Prompt Cheatsheet - Command line interface (as opposed to a GUI - graphical user interface) - Used to execute programs - Commands are small programs that do something useful - There are many commands already included with Windows, but we will use a few. - A filepath is where you are in the filesystem • C: is the C drive • C:\user\Documents is the Documents folder • C:\user\Documents\hello.c is a file in the Documents folder Command What it Does Usage dir Displays a list of a folder’s files dir (shows current folder) and subfolders dir myfolder cd Displays the name of the current cd filepath chdir directory or changes the current chdir filepath folder. cd .. (goes one directory up) md Creates a folder (directory) md folder-name mkdir mkdir folder-name rm Deletes a folder (directory) rm folder-name rmdir rmdir folder-name rm /s folder-name rmdir /s folder-name Note: if the folder isn’t empty, you must add the /s. copy Copies a file from one location to copy filepath-from filepath-to another move Moves file from one folder to move folder1\file.txt folder2\ another ren Changes the name of a file ren file1 file2 rename del Deletes one or more files del filename exit Exits batch script or current exit command control echo Used to display a message or to echo message turn off/on messages in batch scripts type Displays contents of a text file type myfile.txt fc Compares two files and displays fc file1 file2 the difference between them cls Clears the screen cls help Provides more details about help (lists all commands) DOS/Command Prompt help command commands Source: https://technet.microsoft.com/en-us/library/cc754340.aspx.
[Show full text]
Expression Definition FS.COMMAND Qualifier. Operates on a File System Command
Expression Definition FS.COMMAND Qualifier. Operates on a file system command. The user can issue multiple commands on a file transfer portal. (For example, ls to list files or mkdir to create a directory). This expression returns the current action that the user is taking. Possible values: Neighbor, login, ls, get, put, rename, mkdir, rmdir, del, logout, any. Following is an example: Add authorization policy pol1 “fs.command eq login && (fs.user eq administrator || fs.serverip eq 10.102.88.221 –netmask 255.255.255.252)” allow FS.USER Returns the user who is logged on to the file system. FS.SERVER Returns the host name of the target server. In the following example, the string win2k3-88-22 is the server name: fs.server eq win2k3-88-221 FS.SERVERIP Returns the IP address of the target server. FS.SERVICE Returns a shared root directory on the file server. If a particular folder is exposed as shared, a user can directly log on to the specified first level folder. This first level folder is called a service. For example, in the path \\hostname\SERVICEX\ETC, SERVICEX is the service. As another example, if a user accesses the file \\hostname\service1\dir1\file1.doc, FS.SERVICE will return service1. Following is an example: fs.service notcontains New FS.DOMAIN Returns the domain name of the target server. FS.PATH Returns the complete path of the file being accessed. For example, if a user accesses the file \\hostname\service1\dir1\file1.doc, FS.PATHwill return \service\dir1\file1.doc. Following is an example: fs.path notcontains SSL Expression Definition FS.FILE Returns the name of the file being accessed.
[Show full text]
TRSDOS 6.2 to LS-DOS 6.3.0 Manual Update
LS-DOSÔ 6.3 UPDATE FOR TRSDOSâ 6.2.X The LS-DOS 6.3 release is an upgrade for the TRSDOS 6.2 operating system. Several important changes have been made to extend and enhance the operating system and its utilities. The date ranging has been expanded to accept dates through the year 1999. Files will now carry a modification time as well as a date. The DATECONV/CMD program is provided to translate version 6.2 or earlier disks to the 6.3 style dating. The user password has been eliminated from the system. The owner password still remains. The library command ID was added to display a customer service number. Several enhancements have been made to BASIC. The new DISKCOPY/CMD program will duplicate 5" double density floppy disks. Because the LS-DOS 6.3 update is a series of enhancements to TRSDOS 6.2, the primary documentation remains the 6.2 manual and Technical Reference manual. If you have a version of TRSDOS earlier than 6.2, you can obtain the manuals from Radio Shack under the catalog numbers 26-0316 (TRSDOS Version 6 [6.2 DOS manual and disk]), 26-2110 (Model 4/4D [6.2] Technical Reference Manual), or 26-1117 (6.2 DOS manual only). This documentation should be treated as an addendum to the TRSDOS 6.2 information. LS-DOS 6.3 installation instructions Before performing the upgrade, it is recommended that you make several backup copies of the 6.3 master disk. The simplest way to do this is to boot your system using the 6.3 diskette, insert a blank diskette to receive the copy in drive 1, and type the command: DISKCOPY :0 :1 When the copy finishes, you can insert another destination diskette and make another copy.
[Show full text]
Introduction to UNIX at MSI June 23, 2015 Presented by Nancy Rowe
Introduction to UNIX at MSI June 23, 2015 Presented by Nancy Rowe The Minnesota Supercomputing Institute for Advanced Computational Research www.msi.umn.edu/tutorial/ © 2015 Regents of the University of Minnesota. All rights reserved. Supercomputing Institute for Advanced Computational Research Overview • UNIX Overview • Logging into MSI © 2015 Regents of the University of Minnesota. All rights reserved. Supercomputing Institute for Advanced Computational Research Frequently Asked Questions msi.umn.edu > Resources> FAQ Website will be updated soon © 2015 Regents of the University of Minnesota. All rights reserved. Supercomputing Institute for Advanced Computational Research What’s the difference between Linux and UNIX? The terms can be used interchangeably © 2015 Regents of the University of Minnesota. All rights reserved. Supercomputing Institute for Advanced Computational Research UNIX • UNIX is the operating system of choice for engineering and scientific workstations • Originally developed in the late 1960s • Unix is flexible, secure and based on open standards • Programs are often designed “to do one simple thing right” • Unix provides ways for interconnecting these simple programs to work together and perform more complex tasks © 2015 Regents of the University of Minnesota. All rights reserved. Supercomputing Institute for Advanced Computational Research Getting Started • MSI account • Service Units required to access MSI HPC systems • Open a terminal while sitting at the machine • A shell provides an interface for the user to interact with the operating system • BASH is the default shell at MSI © 2015 Regents of the University of Minnesota. All rights reserved. Supercomputing Institute for Advanced Computational Research Bastion Host • login.msi.umn.edu • Connect to bastion host before connecting to HPC systems • Cannot run software on bastion host (login.msi.umn.edu) © 2015 Regents of the University of Minnesota.
[Show full text]
AT Command User Guide 80591ST10886A Rev
LN940 SERIES AT Command User Guide 80591ST10886A Rev. 1.4 – 2018-04-05 ] 7 .201 Mod. 0806 2017-01 Rev.6 01 [ SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE NOTICES LIST While reasonable efforts have been made to assure the accuracy of this document, Telit assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein. The information in this document has been carefully checked and is believed to be reliable. However, no responsibility is assumed for inaccuracies or omissions. Telit reserves the right to make changes to any products described herein and reserves the right to revise this document and to make changes from time to time in content hereof with no obligation to notify any person of revisions or changes. Telit does not assume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it convey license under its patent rights or the rights of others. It is possible that this publication may contain references to, or information about Telit products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that Telit intends to announce such Telit products, programming, or services in your country. COPYRIGHTS This instruction manual and the Telit products described in this instruction manual may be, include or describe copyrighted Telit material, such as computer programs stored in semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material.
[Show full text]
Lab - Observing DNS Resolution (Instructor Version) Instructor Note: Red Font Color Or Gray Highlights Indicate Text That Appears in the Instructor Copy Only
Lab - Observing DNS Resolution (Instructor Version) Instructor Note: Red font color or Gray highlights indicate text that appears in the instructor copy only. Objectives Part 1: Observe the DNS Conversion of a URL to an IP Address Part 2: Observe DNS Lookup Using the Nslookup Command on a Web Site Part 3: Observe DNS Lookup Using the Nslookup Command on Mail Servers Background / Scenario The Domain Name System (DNS) is invoked when you type a Uniform Resource Locator (URL), such as http://www.cisco.com, into a web browser. The first part of the URL describes which protocol is used. Common protocols are Hypertext Transfer Protocol (HTTP), Hypertext Transfer Protocol over Secure Socket Layer (HTTPS), and File Transfer Protocol (FTP). DNS uses the second part of the URL, which in this example is www.cisco.com. DNS translates the domain name (www.cisco.com) to an IP address to allow the source host to reach the destination host. In this lab, you will observe DNS in action and use the nslookup (name server lookup) command to obtain additional DNS information. Work with a partner to complete this lab. Required Resources 1 PC (Windows 7, Vista, or XP with Internet and command prompt access) Part 1: Observe the DNS Conversion of a URL to an IP Address a. Click the Windows Start button, type cmd into the search field, and press Enter. The command prompt window appears. b. At the command prompt, ping the URL for the Internet Corporation for Assigned Names and Numbers (ICANN) at www.icann.org. ICANN coordinates the DNS, IP addresses, top-level domain name system management, and root server system management functions.
[Show full text]
Your Performance Task Summary Explanation
Lab Report: 11.2.5 Manage Files Your Performance Your Score: 0 of 3 (0%) Pass Status: Not Passed Elapsed Time: 6 seconds Required Score: 100% Task Summary Actions you were required to perform: In Compress the D:\Graphics folderHide Details Set the Compressed attribute Apply the changes to all folders and files In Hide the D:\Finances folder In Set Read-only on filesHide Details Set read-only on 2017report.xlsx Set read-only on 2018report.xlsx Do not set read-only for the 2019report.xlsx file Explanation In this lab, your task is to complete the following: Compress the D:\Graphics folder and all of its contents. Hide the D:\Finances folder. Make the following files Read-only: D:\Finances\2017report.xlsx D:\Finances\2018report.xlsx Complete this lab as follows: 1. Compress a folder as follows: a. From the taskbar, open File Explorer. b. Maximize the window for easier viewing. c. In the left pane, expand This PC. d. Select Data (D:). e. Right-click Graphics and select Properties. f. On the General tab, select Advanced. g. Select Compress contents to save disk space. h. Click OK. i. Click OK. j. Make sure Apply changes to this folder, subfolders and files is selected. k. Click OK. 2. Hide a folder as follows: a. Right-click Finances and select Properties. b. Select Hidden. c. Click OK. 3. Set files to Read-only as follows: a. Double-click Finances to view its contents. b. Right-click 2017report.xlsx and select Properties. c. Select Read-only. d. Click OK. e.
[Show full text]
Powerview Command Reference
PowerView Command Reference TRACE32 Online Help TRACE32 Directory TRACE32 Index TRACE32 Documents ...................................................................................................................... PowerView User Interface ............................................................................................................ PowerView Command Reference .............................................................................................1 History ...................................................................................................................................... 12 ABORT ...................................................................................................................................... 13 ABORT Abort driver program 13 AREA ........................................................................................................................................ 14 AREA Message windows 14 AREA.CLEAR Clear area 15 AREA.CLOSE Close output file 15 AREA.Create Create or modify message area 16 AREA.Delete Delete message area 17 AREA.List Display a detailed list off all message areas 18 AREA.OPEN Open output file 20 AREA.PIPE Redirect area to stdout 21 AREA.RESet Reset areas 21 AREA.SAVE Save AREA window contents to file 21 AREA.Select Select area 22 AREA.STDERR Redirect area to stderr 23 AREA.STDOUT Redirect area to stdout 23 AREA.view Display message area in AREA window 24 AutoSTOre ..............................................................................................................................
[Show full text]
Penndot Form MV-409
MV-409 (3-18) www.dmv.pa.gov APPLICATION FOR CERTIFICATION OF For Department Use Only BureauP.O. Box of Motor 68697 Vehicles Harrisburg, • Vehicle PAInspection 17106-8697 Division OFFICIAL VEHICLE SAFETY INSPECTOR • PRINT OR TYPE ALL INFORMATION - MUST BE SUBMITTED TO AN APPROVED EDUCATIONAL FACILITY Applicant must be 18 years of age and have a valid operator’s license for each class of vehicle he/she intends to inspect. Applicant must also complete a lecture course at an approved educational facility, pass a written test and satisfactorily perform a complete inspection of a vehicle. upon successful completion of these courses, you will receive your certified safety inspection certification card in approximately 6 to 8 weeks from the date your class ended. The school has 35 days from the class ending date to submit the paperwork for processing. You may not begin inspecting until you receive your certification card. A APPLICANT INFORMATION Last Name First Name Middle Name Sex birth Date Driver’s License Number State r M r F Street Address City State County Zip Code Work Telephone Number Home Telephone Number Do you currently hold a valid out-of-state driver’s license? (If yes, attach a copy.) . r Yes r No *Contact PennDOT’s Vehicle Inspection Division at 717-787-2895 to establish an out-of-state mechanic record prior to completion of this class. List any restrictions on your driver’s license (if applicable): ______________________________________________________________ Do you currently hold a valid Pennsylvania driver’s license? . r Yes r No Have you held a Pennsylvania driver’s license in the past? .
[Show full text]
Shells and Shell Scripting
Shells and Shell scripting What is a Shell? • A shell is a command line interpreter that is the interface between the user and the OS. • A “program launcher” of sorts. • The shell: o analyzes each command o determines what actions are to be performed o performs the actions • Example: wc –l file1 > file2 Which shell? • sh – Bourne shell o Most common, other shells are a superset o Good for programming • csh or tcsh – default for command line on CDF o C-like syntax o Best for interactive use. Not good for programming. • bash – default on Linux (Bourne again shell) o Based on sh, with some csh features. • korn – written by David Korn o Based on sh – Some claim best for programming. o Commercial product. Common shell facilities Shell startup When a shell is invoked, it does the following: 1. Read a special startup file (usually in home directory) 2. display prompt and wait for command 3. Ctrl-D on its own line terminates shell, otherwise, goto step 2. Shell startup files used to set shell options, set up environment variables, alias sh – executes .profile if it’s there. ksh – executes .profile if in interactive mode. Executes $ENV (usually $HOME/.kshrc) csh – executes .cshrc if it exists. If a login shell, executes .login bash – executes .bashrc, if a login shell, executes .bash_profile instead Executables vs. built-in commands Most commands you run are other compiled programs. Found in /bin Example: ls – shell locates ls binary in /bin directory and launches it Some are not compiled programs, but built into the shell: cd, echo Input-output redirection prog < infile > outfile ls > outfile 2>&1 # sh stdout and stderr Pipelining commands send the output from one command to the input of the next: ls -l | wc ps –aux | grep reid | sort Before a program is executed, the shell recognizes the special characters such as <, >, |, and rewires the standard input, output, or error file descriptors of the program about to be executed to point to the right files (or the standard input of another program).
[Show full text]
NETSTAT Command
NETSTAT Command | NETSTAT Command | Use the NETSTAT command to display network status of the local host. | | ┌┐────────────── | 55──NETSTAT─────6─┤ Option ├─┴──┬────────────────────────────────── ┬ ─ ─ ─ ────────────────────────────────────────5% | │┌┐───────────────────── │ | └─(──SELect───6─┤ Select_String ├─┴ ─ ┘ | Option: | ┌┐─COnn────── (1, 2) ──────────────── | ├──┼─────────────────────────── ┼ ─ ──────────────────────────────────────────────────────────────────────────────┤ | ├─ALL───(2)──────────────────── ┤ | ├─ALLConn─────(1, 2) ────────────── ┤ | ├─ARp ipaddress───────────── ┤ | ├─CLients─────────────────── ┤ | ├─DEvlinks────────────────── ┤ | ├─Gate───(3)─────────────────── ┤ | ├─┬─Help─ ┬─ ───────────────── ┤ | │└┘─?──── │ | ├─HOme────────────────────── ┤ | │┌┐─2ð────── │ | ├─Interval─────(1, 2) ─┼───────── ┼─ ┤ | │└┘─seconds─ │ | ├─LEVel───────────────────── ┤ | ├─POOLsize────────────────── ┤ | ├─SOCKets─────────────────── ┤ | ├─TCp serverid───(1) ─────────── ┤ | ├─TELnet───(4)───────────────── ┤ | ├─Up──────────────────────── ┤ | └┘─┤ Command ├───(5)──────────── | Command: | ├──┬─CP cp_command───(6) ─ ┬ ────────────────────────────────────────────────────────────────────────────────────────┤ | ├─DELarp ipaddress─ ┤ | ├─DRop conn_num──── ┤ | └─RESETPool──────── ┘ | Select_String: | ├─ ─┬─ipaddress────(3) ┬ ─ ───────────────────────────────────────────────────────────────────────────────────────────┤ | ├─ldev_num─────(4) ┤ | └─userid────(2) ─── ┘ | Notes: | 1 Only ALLCON, CONN and TCP are valid with INTERVAL. | 2 The userid
[Show full text]