KL SANDEFJORD IMO No: 9470466 Call sign: LFXC Design: AH 12 CD / STX NORWAY Built. 2011

AH 12 CD AHTS designed by STX and delivered by STX NOL (Langsten), Norway as multi-functional ultra deep water Anchor Handling Tug Supply and service vessels. With a bollard pull of more than 390T, these vessels are ideally suited for seabed operations, ploughing/trenching and pre lay work. Fitted with an ROV hangar and ODIM LARS system for handling of inspection- and work-class ROVs used in underwater operations.

The vessel are fitted with a hybrid configurated propulsion plant serving two main propellers, one retractable plus two tunnel thrusters forward and one retractable plus one tunnel thruster aft. An ODIM Anchor Recovery Frame (ARF) for handling large anchors of Torpedo type is fitted on aft deck and is flush with the main deck when in stowed position. In addition to large chain and fibre rope capacity. The vessels have two double jib RRM cranes with manipulators for Safe Deck Operations. These cargo rail cranes are serving the entire working area of the main deck. A 250T A-frame is available for subsea construction work.

Yard Call Port of Name IMO No. Flag Built no. sign Registry

731 KL SANDEFJORD 9470466 lfxc NOR Arendal 2011

732 KL SALTFJORD 9470478 LGFT NOR Arendal 2011

All figures and data belived to be correct, but not guaranteed Profile and plan of tween deck and tank top

MAIN DECK

TWEEN DECK

TANK TOP

Tween deck

Tank top

250T SWL A-frame Cargo rail cranes w/manipulators and wire anti-twist devices

ROV hangar + Launch And Recovery System (LARS) Fibre rope storage reel Rig chain locker Technical data

GENERAL MACHINERY & PROPULSION

Name KL SANDEFJORD System Diesel Mechenical / Diesel Electric / Hybrid Design AH 12 CD Main Engine 2 x Wartsila 16V32 / 8000 / 7680kw 750/720rpm Built by STX Norway Langsten PTO for Shaft Generator Forward Yard No 731 Gear/Clutch Aft for CPP Mechanical Propulsion Built 2011 PTI for Hybrid Propulsion 2 x 4,500kw IMO No 9470466 Generator Sets 5 x Caterpillar 3516C 2,188kw 1,800rpm Call Sign LFXC AVK Generator 2,100kw Flag Norway PTO 2 x 4,000kw to A-C Alternator 690V Port of Registry Arendal Power Installed: 27,000kw (36,710BHP) Propulsion: 25,000kw (34,000BHP) Propellers 2 x ø4,900mm CPP, 4 Blades, 130rpm Class Rudders 2 x Flap Rudder, Spade Type DNV ✠ 1A1, Offshore Service Vessel+ AHTS, SF, COMF-V(3),E0, Control: Synchro and Split mode DYNPOS-AUTR(IMO DP II), NAUT-OSV(A), Forward Tunnel Thrusters 2 x Wartsila FT250 1,200kw CLEAN DESIGN, DK(+), HL(2.8), TMON Frequency Driven Electric Motor Fixed Pitch Propeller Forward Azimuth Thruster 1 x Wartsila FS225-MNR 1,500kw DIMENSION Retractable Frequency Driven Electric Motor LOA 95.2 m Fixed Pitch Propeller LPP 84.8 m Aft Tunnel Thrusters 1 x Wartsila FT250 1,200kw Breadth 24.0 m Frequency Driven Electric Motor Depth Main Deck 9.8 m Fixed Pitch Propeller Draught (Summer, at mark) 7.80 m Aft Azimuth Thruster 1 x Wartsila FS225-MNR 1,500kw Draught (Summer, Extreme) 8.85 m Retractable Frequency Driven Electric Motor Height (Keel to Antenna) 44.5 m Fixed Pitch Propeller Deadweight (Summer) 4,246 T GRT 8,360 T PERFORMANCE NRT 2,508 T Max Speed 18.5 kts 143 m3/day Economical Speed 10.0 kts 22 m3/day DECK CAPACITY Stand by at Sea 4 – 5 m3/day (1 x Azimuth + 1 x Generator) Deck Area 750 m2 (Approx.) Max Payload DP 12 m3/day (2 x Generators) 10 T/m2 In Port 3 m3/day Max Deck Cargo Weight 2,570 T Figures are Avarage and Not Guaranteed Cargo Rail Height 3.1 m Reefer Container Sockets 2 x 230V / 16A, 1 x 230V / 32A DYNAMIC POSITIONING SYSTEM 3 x 230V / 16A (1-phase) System K-POS-21 (IMO DPII) Class Approved for Closed Bus-Tie Operation CARGO PUMPS ERN 99.99.99.84 Fuel Oil 2 x Electric Two-Spindle Screw Pumps Reference Systems 250m3/h @90m 1 x DGPS Kongsberg Seatex DPS 132 Fresh Water 1 x Centrifugal Pump with Air Ejector 1 x DGPS/DGNSS Kongsberg Seatex DPS 232 250m3/h @90m 1 x Fanbeam MDL Laser MK4.2 Mud 2 x Electric Eccentric Screw Pumps 1 x Hipap Kongsberg Maritime Hydroacoustic Hipap 501 75m3/h @90m 1 x RADius System Preparation only Brine 1 x Electric Eccentric Screw Pump 75m3/h @90m ACCOMMODATION Ballast/Drill Water 1 x Electric Two-Spindle Screw Pump 250m3/h @90m Total 70 PERSONS Single Cabins 20 with SAT TV + Internet Access Double Cabins 25 with SAT TV + Internet Access ROV Hospital 1 ROV Hanger Starboard Side Offices Bridge: 1 x Ship’s Office / Radio Station ODIM LARS Overhead Type Heave Conpensated D Deck: 1 x Ship’s Office 3,000m of Water Depth 1 x Conference Room Docking Head to Most Types of C Deck: 1 x Client Office Work/Observation ROV A Deck: 1 x Client / Ship’s Office ROV Control Room on A Deck 1 x Conference Room ROV IKM MERLIN WR 200 Lounges D deck: 2 A deck: 1 Sky Lounge with Electrical Work Class ROV 200 HP SAT TV and Home Cinema Surround System Feasible for 3,000 m water depth Gymnasium 1 with Full Equipment All figures and data belived to be correct, but not guaranteed ANCHOR HANDLING AND TOWING EQUIPMENT

PROFILE AND MAIN DECK ARRANGEMENT + MIDSHIP AND STERN views

Main deck

Towing / AH winch x 2 Secondary winch x 2 Special handling drum Spooling gear for towing/ AH winches Spooling gear for secondary winches Spooling gear for special handling drum Fiber rope storage reels (below main deck) Emergency towing wire drum (below main deck) Chain pulling winch Adjustable chain roller x 2 Rig chain shutes (detachable) Rig chain locker x 6 Detachable pennant winder Towing guide Centering device x 2 MAIN DECK Shark jaw x 2 Towing pins x 2 sets Pop-up pins x 2 SWL 250T A-frame Twin stern roller Cargo Rail Cranes with wire anti-twist device + mani- pulator. PS+SB (SB side shown, PS symmetric) Midship view Stern view Tugger winch midships x 2 Mooring / tugger winch aft x 2 Anchor Recovery Frame (ARF) Cargo load/ discharge stations (FO, FW, BO, WB, MUD, BRINE 5¨ male and SLOP 4¨ male) GENERAL

Bollard Pull 390 T Winch Control Remote Control from Aft Bridge Winch Maker RRM Brattvaag Winch Type Towing/Anchor Handling Winch 2BSL600W/SL500W of Waterfall Type Chain Locker Capacity Number of Chain Lockers: 6 Volume: 171m3 / Locker (Total 1,026 m3) 76mm: 1,900 - 2,500m / Locker (Total 11,800 - 13,800m) 84mm: 1,700 - 2,100m / Locker (Total 10,800 - 11,800m) Capacity is depending on age/quality of chain

ANCHOR HANDLING WINCHES (MAIN WINCHES)

Number 2 Cable Lifter / Gipsy 2 x 76mm, 2 x 84mm, 2 x 120mm Pull 600T Spooling Device Max Side Load 62T Static Brake holding load 950T @1st Layer Equipped Emergency Release Dimension L: 2,500mm Drum Dia: 2,000mm Flange Dia: 4,600mm

ROPE CAPACITY

Wire Rope Synthetic Fibre Rope 76mm: 6,200m 150mm: 1,450m 77mm: 5,700m 160mm: 1,150m 83mm: 5,000m 180mm: 900m 84mm: 4,900m 203mm: 850m 90mm: 4,400m 210mm: 650m 102mm: 3,300m

DUTY Step 1 Step 2 Step 3 Lowering Dynamic Braking 1st Layer 600T @18.0m/min 367T @29.8m/min 154T @51.0m/min 51m/min 816T @62.0m/min Mid Drum 393T @28.6m/min 240T @45.4m/min 101T @76.0m/min 76m/min 535T @94.5m/min Full Drum 292T @38.4m/min 179T @61.0m/min 75T @103.0m/min 103m/min 398T @128.0m/min

SPECIAL HANDLING WINCH

Number 1 Special Compartment 1,100mm Pull 500T Spooling Device Max Side Load 60T Static Brake holding load 600T @1st Layer Equipped Emergency Release Dimension L: 6,500mm Drum Dia: 3,500mm Flange Dia: 5,400mm

ROPE CAPACITY (STORAGE PART)

Wire Rope Synthetic Fibre Rope Chain 76mm: 14,800m 150mm: 3,400m 76mm: 1,500 - 1,700m 77mm: 14,650m 160mm: 3,200m 84mm: 1,200 - 1,400m 83mm: 12,500m 180mm: 2,350m 84mm: 12,400m 203mm: 2,150m 90mm: 10,550m 210mm: 1,600m 102mm: 8,500m

DUTY Step 1 Step 2 Step 3 Lowering Dynamic Braking 1st Layer 500T @22.0m/min 305T @35.0m/min 128T @60.0m/min 61m/min 625T @72.0m/min Mid Drum 420T @26.3m/min 256T @41.7m/min 107T @72.0m/min 73m/min 471T @85.0m/min Full Drum 352T @31.3m/min 215T @49.7m/min 90T @85.0m/min 87m/min 367T @102.0m/min SECONDARY WINCHES TUGGER WINCH MIDSHIPS

Maker RRM Brattvaag Maker RRM Brattvaag Type 2ALM63170U, 170T Type LAKMX 132020 Number 2 Number 2 (Port and Starboard Side) Pull 170T SWL 24T Static Brake holding load 210T @1st Layer Dimension L: 1,000mm Dimension L: 4,500mm Drum Dia: 1,500mm Drum Dia: 900mm Flange Dia: 4,500mm Flange Dia: 2,300mm Special Compartment 1,100mm Wire Rope Capacity 24mm : 6,400m Spooling Device Max Side Load 23T (on Each Drum) 32mm : 3,500m 77mm : 500m Duty on 1st Layer 24T @22.0m/min ROPE CAPACITY (STORAGE PART, EACH SIDE) 16T @33.0m/min Wire Rope Synthetic Fibre Rope Remote Control RRM Portable Wireless 76mm: 8,300m 150mm: 2,950m Control System 77mm: 8,100m 160mm: 2,500m 83mm: 6,900m 180mm: 2,000m 84mm: 6,800m 203mm: 1,550m TUGGER WINCH AFT 90mm: 5,700m 210mm: 1,250m Maker RRM Brattvaag 102mm: 4,400m Max Weight: 200 MT Type LAKMX 41017 Number 2 (Port and Starboard Side) DUTY Dynamic Braking SWL 17T 1st Layer 170T @24.0m/min 210T @58.0m/min Dimension L: 800mm Full Drum 64T @63.0m/min 80T @154.0m/min Drum Dia: 460mm Flange Dia: 900mm Warping Head L: 450mm Dia: 400mm SYNTHETIC FIBRE ROPE STORAGE REELS Wire Rope Capacity 24mm : 680m Maker ODIM (RRM) (on Each Drum) 32mm : 340m Number 2, Below Main Deck Duty on 1st Layer 17T @29.0m/min Dimension L: 4,790mm Remote Control RRM Portable Wireless Drum Dia: 1,000mm Control System Flange Dia: 3,950mm Socket Compartment L: 900mm CHAIN HANDLING DEVICE (Each Side) Flange Dia:2,400mm Synthetic Fibre Rope 150mm : 2,250m Chain Size 70mm to 162mm Capacity 160mm : 2,200m Chain Pulling Wheels 2 x RRM Brattvaag AKMX 4185 (on Each Drum) 180mm : 1,750m Chain Crossing Device Possible to handle chain by winch 203mm : 1,150m from Starboard to Port side 210mm : 1,100m Chain Lockers and vice versa. Chain Chutes to/from Chain Lockers. Partly Detachable. SPARE TOWING WIRE DRUM/REEL Cable Lifters 2 x 76mm, 2 x 84mm, 2 x 120mm Maker RRM Type LALM 132020 STERN ROLLER Number 1, Below Main Deck Dimension L: 3,000mm Maker RRM Drum Dia: 1,000mm Number 2 Flange Dia: 2,700mm MWL 750T Socket Compartment L: 900mm SWL 500T (Each Side) Flange Dia:2,400mm Dimension L: 3,000mm Dia: 4,500mm Wire Rope Capacity 90mm : 1,800m 102mm : 1,450m ANCHOR RECOVERY FRAME (ARF)

Maker ODIM (RRM) CARGO RAIL CRANES Dimension 7,500 x 9,140 x 6,620mm Maker RRM (LxWxH) (Above Deck) Type SDO-Double Jib with Manipulators SWL 200T + Wire Anti Twist Devices Remote control Number 2 SWL 5T @3.2-10m / 3T @10-14.3m TOWING PINS

Maker RRM Brattvaag Number 2 MWL BP 400T/600 Sideway Angle Locking Arms MWL BP 400T/300 Upwards Angle Pulling Down Force 60T

STOP (POP-UP) PINS

Maker RRM Number 2 Sets, Rotating Type Dimension L: 600mm Dia: 350mm Position in line with Stern Roller SWL 200T

SHARK JAWS

Maker RRM Number 2 MWL 800T Inserts 50-70mm 76-95mm 100-120mm 125-166mm

CENTERING DEVICE

Maker RRM Number 2 Working Width 2,000mm Position 1,000mm to Each Side of Shark Jaw Centre Line

PENNANT WINDER

Maker RRM Brattvaag Type LAKCX 4108 Number 1 Dimension Dia: 830/2,310mm H: 630mm Wire Rope Capacity 76mm : 200m Tilt Rotator 360deg Rotation Tilt +/-40deg Position Main Deck Port Side with Hyd Drive Unit

A-FRAME

Maker MacGregor SWL 250T Inner Width 15,500mm (Leg) 10,500mm (Top) Inner Height 11,100mm Outreach Aft: 8.5m Forward:4.55m To Be Placed Before Use

ANCHOR HANDLING GEARS

Bracket for SDO Tool Tools for Catching PCP Forerunner Lasso for Bouys AHTS Swivels Spooling Sheave for Shark Jaw Grapnel 250T SWL Chaser 250T SWL SMIT Bracket on bow 350T SWL (500T MBL)

All figures and data belived to be correct, but not guaranteed Tank ARRANGEMENT

WB WB WB WB WB FO WB FO MUD/BRINE/FO MUD/BRINE/FO FW FO

RIGCH/WB RIGCH/WB RIGCH/WB

RIGCH/WB RIGCH/WB RIGCH/WB DW

FW MUD/BRINE/FO MUD/BRINE/FO FO FO WB WB WB/FW WB/FW WB WB WB WB

Below main deck

WB WB WB FO WB FO WB

FW FW RIGCH/WB RIGCH/WB RIGCH/WB

WB FW

DW WB RIGCH/WB RIGCH/WB RIGCH/WB

FW FW

FO WB WB FO WB WB WB

Below tween deck

WB WB WB WB WB FW

FW

DW

FW WB WB WB

WB WB

Below tank top

Fuel oil (FO) Mud Fresh water (FW) Drill water (DW) Water ballast (WB) BRINE X/Z RIGCH Tank capacites Tank capacites

WEIGHT 100% (MT)

VOLUME Tank ID Contents 3 FUEL Brine Brine FRESH WATER DRILL 100% (m ) RIG OIL MUD Cat.x Cat.Z WATER BALLAST WATER CHAin (FO) (BRIX) (BRIZ) (FW) (WB) (DW)

S.G. (MT/m3) 0,860 2,800 2,300 1,500 1,000 1,025 1,000 FORFRONT SB FO 39,0 33,5 FORFRONT PS FO 39,0 33,5 FOWT5 SB FO 80,7 69,4 FOWT5 PS FO 80,7 69,4 WT6 SB FO 55,9 48,1 WT 6 PS FO 55,9 48,1 FOOVERFLOW FO 78,7 67,7 FOSETTL PS FO 74,8 64,3 FOSERVICE SB FO 64,0 55,0 FOSERVICE PS FO 77,7 66,8 FOWT6 SB FO/BRINE/MUD 210,9 181,4 590,5 485,1 316,4 FOWT6 PS FO/BRINE/MUD 210,9 181,4 590,5 485,1 316,4 FOWT7 SB FO/BRINE/MUD 171,1 147,1 479,1 393,5 256,7 FOWT7 PS FO/BRINE/MUD 171,1 147,1 479,1 393,5 256,7 FOCT6 FO 110,7 95,2 FOCT7 FO 138,5 119,1 FOSETTL SB FO 74,8 64,3 FOWT8 PS FO 104,4 89,8 FOWT8 SB FO 104,4 89,8 DBWT2 SB FW 319,6 319,6 DBWT2 PS FW 318,6 318,6 SKEGTK FW FW 40,8 40,8 DBWT9 SB FW 36,6 36,6 DBWT9 PS FW 36,6 36,6 RIGCH1 SB RIGCHA/WB 170,9 + 175,2 RIGCH1 PS RIGCHA/WB 170,9 + 175,2 RIGCH2 SB RIGCHA/WB 171,1 + 175,4 RIGCH2 PS RIGCHA/WB 171,1 + 175,4 RIGCH3 SB RIGCHA/WB 171,1 + 175,4 RIGCH3 PS RIGCHA/WB 171,1 + 175,4 FOREPEAK WB/DW 287,8 295,0 287,8 DBWT3 SB WB 200,1 205,1 DBWT3 PS WB 200,3 205,3 DBWT4 SB WB 238,6 244,6 DBWT4 PS WB 220,8 226,3 DBWT5 SB WB 164,8 168,9 DBWT5 PS WB 172,5 176,8 DBWT6 SB WB 187,2 191,9 DBWT6 PS WB 187,2 191,9 HEELING SB WB 326,8 335,0 HEELING PS WB 328,0 336,2 AFTPEAK SB WB 146,9 150,6 AFTPEAK PS WB 146,9 150,6 STAB1 WB/FW 316,8 316,8 324,7 STAB2 WB/FW 344,1 344,1 352,7 Total weight (MT, 100%) 1671,0 2139,2 1757,2 1146,2 1413,1 4607,6 287,8 Total volume (m3, 100%) 1943,2 764,0 764,0 764,0 1413,1 1026,2 4495,0 287,8

Remark Drill water can be loaded to Water Ballast Tanks

All figures and data belived to be correct, but not guaranteed All information in this brochure is believed to be a correct representation of the vessel and its capacity at the time printing. Graphic D esign: T ress esign AS - www.tressdesign.no / Print: Birkeland rykkeri 062010 As the purpose of this brochure is for general information only, ”K” Line Offshore will not make any warranties about its accuracy.

Mail address: Office address: Telephone: [+47] 40 00 06 68 P.O.Box 198 Kirkegaten 5 e-mail: [email protected] NO-4802 Arendal N-4836 Arendal Norway Norway www.klineoffshore.no