1st PERIOD MILLWRIGHT APPRENTICE TOOL LIST
Effective September 1st, 2016
Required Tools: All tools are English standard, unless otherwise specified.
Wrenches, Combination – 3/8” thru 1 ¼” by 1/16’s Tape Measure (10’ or 12’) (Steel Recoiling) ½” Drive Socket & Ratchet Set 3/8” thru 1 ¼” 1/16’s 3/8” Drive Socket & Ratchet Set 3/8” thru 7/8” Screwdrivers – Phillips and Flathead 2 each Tongue and Groove Pliers (Channel Lock) 2 set Ball Peen Hammer Cold Chisel Chalk Line Retractable (100’ in Chalk Box) Hack Saw Deep Well Sockets 3/8 and ½ Drive Universal Joints 3/8 and ½ Drive
ALL TOOLS SHOULD BE AMERICAN MADE
2nd PERIOD MILLWRIGHT APPRENTICE TOOL LIST
Required Tools: All tools are English standard, unless otherwise specified.
Wrenches, Combination – 3/8” thru 1 ¼” by 1/16’s Tape Measure (10’ or 12’) (Steel Recoiling) ½” Drive Socket & Ratchet Set 3/8” thru 1 ¼” 1/16’s 3/8” Drive Socket & Ratchet Set 3/8” thru 7/8” Screwdrivers – Phillips and Flathead 2 each Tongue and Groove Pliers (Channel Lock) 2 set Ball Peen Hammer Cold Chisel Chalk Line Retractable (100’ in Chalk Box) Hack Saw Deep Well Sockets 3/8 and ½ Drive Universal Joints 3/8 and ½ Drive
Pry Bar 16” Center Punch Plumb Bob Tin Snips (Left Right Straight) Scraper Drift Punch Long Taper Punch Line Up Bar (Available in various sizes) Locking (Vise Grip) Pliers 6” & 10” Needle Nose Pliers 4 ½ & 7”
Precision/Semi Precision Tools
Feeler Gauges - Long & Short Sets Straight leaves
ALL TOOLS SHOULD BE AMERICAN MADE
3rd PERIOD MILLWRIGHT APPRENTICE TOOL LIST
REQUIRED TOOLS: All tools are English standard, unless otherwise specified.
Hand Tools: Wrenches, Combination – 3/8” thru 1 ¼” by 1/16’s Tape Measure (10’ or 12’) (Steel Recoiling) ½” Drive Socket & Ratchet Set 3/8” thru 1 ¼” 1/16’s 3/8” Drive Socket & Ratchet Set 3/8” thru 7/8” Screwdrivers – Phillips and Flathead 2 each Tongue and Groove Pliers (Channel Lock) 2 set Ball Peen Hammer Cold Chisel Chalk Line Retractable (100’ in Chalk Box) Hack Saw Deep Well Sockets 3/8 and ½ Drive Universal Joints 3/8 and ½ Drive Pry Bar 16” Center Punch Plumb Bob Tin Snips (Left Right Straight) Scraper Drift Punch Long Taper Punch Line Up Bar (Available in various sizes) Locking (Vise Grip) Pliers 6” & 10” Needle Nose Pliers 4 ½ & 7”
1/2” & 3/8” Drive Extension (2” 6” 8”) Wrench Hex Key (Allen) 2 sets (.050 – 3/8 English Standard and (1.5 – 10mm Metric) Adjust Wrench (8” & 10”) Side Cutter Plier (Available 6 ½, 7 5/16, 8 ½)
Precision/Semi-Precision Tools Feeler Gauges - Long & Short Sets Straight leaves Level – Torpedo Scribe (steel, carbide, etc.) Scale (6” Steel Rule by 64th)
THIS IS A MINIMUM LIST TO MEET 3RD PERIOD REQUIREMENTS. YOU WILL FIND THAT ADDITIONAL HAND AND PRECISION TOOLS WILL MAKE YOUR JOB TASK EASIER.
ALL TOOLS SHOULD BE AMERICAN MADE
4th and 5th PERIOD MILLWRIGHT APPRENTICE TOOL LIST
REQUIRED TOOLS: All tools are English standard, unless otherwise specified.
Hand Tools: Wrenches, Combination – 3/8” thru 1 ¼” by 1/16’s Tape Measure (10’ or 12’) (Steel Recoiling) ½” Drive Socket & Ratchet Set 3/8” thru 1 ¼” 1/16’s 3/8” Drive Socket & Ratchet Set 3/8” thru 7/8” Screwdrivers – Phillips and Flathead 2 each Tongue and Groove Pliers (Channel Lock) Ball Peen Hammer Cold Chisel 2 Small & Large Chalk Line Retractable (100’ in Chalk Box) Hack Saw Deep Well Sockets 3/8 and ½ Drive Universal Joints 3/8 and ½ Drive Pry Bar 16” Center Punch Plumb Bob Tin Snips (Left Right Straight) Scraper Drift Punch Long Taper Punch Line Up Bar (Available in various sizes) Locking (Vise Grip) Pliers 6” & 10” Needle Nose Pliers 4 ½ & 7” 1/2” & 3/8” Drive Extension (2” 6” 8”) Wrench Hex Key (Allen) 2 sets (.050 – 3/8 English Standard and (1.5 – 10mm Metric) Adjust Wrench (8” & 10”) Side Cutter Plier (Available 6 ½, 7 5/16, 8 ½)
Precision/Semi-Precision Tools: Feeler Gauges - Long & Short Sets Straight leaves Level – Torpedo Scribe (steel, carbide, etc.) Scale (6” Steel Rule by 64th) 0-1” Micrometer Snap Ring Pliers Set Drill Point Gauge
THIS IS A MINIMUM LIST TO MEET 4th and 5th PERIOD REQUIREMENTS. YOU WILL FIND THAT ADDITIONAL HAND AND PRECISION TOOLS WILL MAKE YOUR JOB TASK EASIER.
ALL TOOLS SHOULD BE AMERICAN MADE
6th PERIOD MILLWRIGHT APPRENTICE TOOL LIST
REQUIRED TOOLS: All tools are English standard, unless otherwise specified.
Hand Tools: Wrenches, Combination – 3/8” thru 1 ¼” by 1/16’s Tape Measure (10’ or 12’) (Steel Recoiling) ½” Drive Socket & Ratchet Set 3/8” thru 1 ¼” 1/16’s 3/8” Drive Socket & Ratchet Set 3/8” thru 7/8” Screwdrivers – Phillips and Flathead 2 each Tongue and Groove Pliers (Channel Lock) Ball Peen Hammer Cold Chisel 2 Small & Large Chalk Line Retractable (100’ in Chalk Box) Hack Saw Deep Well Sockets 3/8 and ½ Drive Universal Joints 3/8 and ½ Drive Pry Bar 16” Center Punch Plumb Bob Tin Snips (Left Right Straight) Scraper Drift Punch Long Taper Punch Line Up Bar (Available in various sizes) Locking (Vise Grip) Pliers 6” & 10” Needle Nose Pliers 4 ½ & 7” 1/2” & 3/8” Drive Extension (2” 6” 8”) Wrench Hex Key (Allen) 2 sets (.050 – 3/8 English Standard and (1.5 – 10mm Metric) Adjust Wrench (8” & 10”) Side Cutter Plier (Available 6 ½, 7 5/16, 8 ½)
Precision/Semi-Precision Tools:
Feeler Gauges - Long & Short Sets Straight leaves Level – Torpedo Scribe (steel, carbide, etc.) Scale (6” Steel Rule by 64th) 0-1” Micrometer Snap Ring Pliers Set Drill Point Gauge Combination Square Set with 12” grooved, ruled blade Calipers, inside/outside 6” Chain Clamps 2 sets Magnet with Telescoping Handle Mirror with Telescoping Handle Dividers 6”
THIS IS A MINIMUM LIST TO MEET 6TH PERIOD REQUIREMENTS. YOU WILL FIND THAT ADDITIONAL HAND AND PRECISION TOOLS WILL MAKE YOUR JOB TASK EASIER. 7th and 8th PERIOD – JOURNEYMAN TOOL LIST
REQUIRED TOOLS: All tools are English standard, unless otherwise specified.
Hand Tools: 1/2” & 3/8” Drive Extension (2” Wrenches, Combination – 3/8” 6” 8”) thru 1 ¼” by 1/16’s Wrench Hex Key (Allen) 2 sets Tape Measure (10’ or 12’) (Steel (.050 – 3/8 English Standard and Recoiling) (1.5 – 10mm Metric) ½” Drive Socket & Ratchet Set Adjust Wrench (8” & 10”) 3/8” thru 1 ¼” 1/16’s Side Cutter Plier (Available 6 ½, 3/8” Drive Socket & Ratchet Set 7 5/16, 8 ½) 3/8” thru 7/8” Screwdrivers – Phillips and Precision/Semi-Precision Tools: Flathead 2 each Feeler Gauges - Long & Short Tongue and Groove Pliers Sets Straight leaves (Channel Lock) Level – Torpedo Ball Peen Hammer Scribe (steel, carbide, etc.) Cold Chisel 2 Small & Large Scale (6” Steel Rule by 64th) Chalk Line Retractable (100’ in 0-1” Micrometer Chalk Box) Snap Ring Pliers Set Hack Saw Drill Point Gauge Deep Well Sockets 3/8 and ½ Combination Square Set with 12” Drive grooved, ruled blade Universal Joints 3/8 and ½ Drive Calipers, inside/outside 6” Pry Bar 16” Chain Clamps 2 sets Center Punch Magnet with Telescoping Handle Plumb Bob Mirror with Telescoping Handle Tin Snips (Left Right Straight) Dividers 6” Scraper Dial Caliper 6” Drift Punch Long Taper Punch Dial Indicator (2 Sets) Line Up Bar (Available in Mag Bases various sizes) 2 Wedges (non-sparking) Brass Locking (Vise Grip) Pliers 6” & or Copper 10” 6” Starrett Precision Level 98 Needle Nose Pliers 4 ½ & 7” Jack Screw
THIS IS A MINIMUM LIST TO MEET JOURNEYMAN REQUIREMENTS. YOU WILL FIND THAT ADDITIONAL HAND AND PRECISION TOOLS WILL MAKE YOUR JOB TASK EASIER.
ALL TOOLS SHOULD BE AMERICAN MADE