SON3t: 3-862-568-21

Trinitron" Color TV

Operating Instructions

KV-32S40 KV-32V40 KV-35S40 KV-35V65 KV-32S45 KV-32V65 KV-35S45 KV-32S65 KV-35S65

© 1998 by Sony Corporation WARNING CAUTION interference in a residentiaJ instagation. This When using TV games, computers, and similar products TO prevent fire or shock hazard, do not expose the TV equipment generates, uses, and can radiate radio with your TV, keep the brightness and picture contrast to fain of f_oistut'e, functions at tow settings, if a fixed (non-moving) fTeq_ency energy and, if not installed and used in pattern is left on the screen for long periods of time at accordance with the instructions, may cause harmful inteference with radio communications. However, a high brightness or picture contrast setting, the image can be permanently imprinted onto the screen. there is no guarantee that Interference will not occur Continuously watching the same program can cause in a particular installation. If this equipment does the imprint of station _ogos onto the TV screen. These cause harmful interference to radio or television types of imprints are not covered by your warranty reception, which can be determined by turning the because they are the result of misuse. equipment off and on, the user is encouraged to try to ATTIENTION correct the interference by one or more of the RPSOUEDECHOCELECTRIQUE, Note on Caption Vision following measures: NEPASOUVRIR • Reorient or relocate the receiving antennas. PRECAUClON This television receiver provides display of television RIE_O OE CHC_UE ELECTRICO closed captioning in accordance with §15.119 of the • Increase the separation between the equipment and NOABRIR FCCrules. receiver. • Connect the equipment into an outlet on a circuit Note on cleaning the TV different from that to which the receiver is connected. DO NOT REMOVE COVE_ CG_BACK) Clean the TV with a soft dry cloth. Never use strong solvents such as thinner or benzine, which might • Consult the dealer or an experienced radio/TV _0 USER SERVICEABLE PA_S I_S_DE damage the finish of the cabinet, technician for help. _EFER 5ERVlCING TO OUAUFJED SERVICE pERSOnNEL

Note to CATV system installer You are cautioned that airy changes or modifications not expressly approved in this This reminder is provided to caU the CATV system manual could void your authority to operate this installer's attention to Article 820-40 of the NEC that equipment. provides guidelines for proper grounding and, in the presence of unlnsulated "dangerous particular, specifies that the cable ground shall be This document is for the remote controls This symbol is intended to alert the user to voltage" within the product's enclosure that connected to the grounding system of the building, as RM-Y165/Y167. may be of sufficient magnitude to constitute close to the point of cable entry as practical. a risk of electric shock to persons. MODELS: KV-32S40, 32S45, 32S65, 321/40, 32V65, Use of this television receiver for other than private 35S40, 35S45, 35565, 351/65 viewing of programs broadcast on UHF or VHF or Thisthe presencesyr_bQ( isofintendedimportantto alertoperatingthe userand to transmitted by cable companies for the use of the maintenance (servicing) instructions in the general public may require authorization from the Sony has determined that this literature accompanying the appbance. broadcaster/cable company and/or program owner. product or product models meets theAs anENERGYENERGYSTARSTAR• guidelines® Partner, CAUTION NOTIFICATION for energy efficiency. TO PREVENTELECTRICSHOCK,DO NOT USETHIS This equipment has been tested and found to comply POLARIZEDAC PLUGWiTH AN EXTENSIONCORD, with the timlts for a Class B digital device pursuant to RECEPTACLE.OR OTHER OUTLETUNLESSTHE BLADESCAN Part 15 of the FCC Rules. These limits are designed to ENERGY STARe ls a U.S. registered mark. BEFULLYINSERTEDTO PREVENTBLADEEXPOSURE. provide reasonable protection against harmful Remote Control

In the instructions that follow, we will refer to the buttons on your remote control. Model shown is RM-Y167, your remote control may Getting to know the buttons on the not look like the one illustrated. MUTING remote control Keepthisflap unfolded and lookto this page TV (POWER) Names of the buttons on the remote control are for reference. SYSTEM OFF presented in different colors to represent the (page TV (FUNCTION) available functions, TV/VTR (page 16} PiP (page 17-19) Button color DISPLAY TV/VIDEO Transparent ...... Press to select the component SLEEP -- ANT (page 5 and 16) you want to control; e.g. VTR (VCR)/DVD, DBS (Direct Broadcast Satellite)/CABLE, -- 0- 9 buttons orTV Green ...... Buttons relevant to power operations, like turning the JUMP -- -- ENTER TV, DBS (Direct Broadcast @ TV/DBS -- MTS/GUIDE (page 24) Satellite)/CABLE, or (page 16) Select buttons VTR (VCR)/DVD on or off (page 13 and 20) RESET Label color MENU (page 22, 23, and 25) White ...... TV/VTR (VCR)/DVD/DBS (Direct Broadcast Satellite)/ VOL +/- CH +/- CABLE operation buttons Yellow ...... PIP operation butt m_ CODE SET -- Blue ...... DBS (Direct Broadcast Satellite) operation buttons (page 30-32) Green ...... SYSTEM OFF operation button SONY

For a detailed eaplana tiolt of most buttons, see

"l_ t, hinq the FV" on tm_e 15. Table of Contents

Welcome! ...... 3 Additional Connections ...... 9 Using Your Menus Precautions ...... 3 Connecting a DVD Player ...... 9 Learning menu selection ...... 20 Connecting an audio system ...... 9 Using This Manual ...... 3 Quick start to the menus ...... 21 Connecting an A/V receiver ...... 10 Using the VIDEO [_ menu ...... 22 Connecting two VCRs ...... 10 Connecting and Installing the TV Using the AUDIO _ menu ...... 23 Connecting a camcorder ...... 11 Making Connections ...... 4 Using the TIMER @ menu ...... 25 S-link Connections ...... 12 Cable or Anten, na Connections ...... 5 Using the SET UP _ menu ...... 26 Connecting S-Link to a VCR ...... 12 Connecting directly to cable Using the BASIC _3 menu ...... 29 or an antenna ...... 5 Connecting S-Link to a DBS ...... 12 Cable and antenna ...... 5 Operating Video Equipment Cable Box Cormections ...... 6 Basic Set Up Programming the remote control ...... 30 Cable box ...... 6 Inserting batteries ...... 13 Using the remote control move & Cable box and cable ...... 6 Operating a Cable Box or DBS select buttons ...... 13 VCR Connections ...... 7 Receiver On-screen help/instructions ...... 13 Connecting an antenna/cable TV Programming the remote control ...... 32 system with a VCR ...... 7 Using Your New TV Connecting a VCR and TV with a Troubleshooting ...... 33 cable box ...... 7 Setting up the "IV automatically ...... 14 Specifications ...... 34 DBS Connections ...... 8 Watching the TV ...... 15 Index ...... 36 Connecting a DBS receiver ...... 8 Watching two programs at one time-PIP ...... 17 Connecting a DBS receiver and a VCR ...... 8 Single Tuner PIP ...... 17 Dual Tuner PIP ...... 19 _W Welcome! l-_CoJt!O .S Using This Manual

Thank you for purchasing the Sony Safety This manual is divided into four major Trinitron _"Color TV. This manual is written • Operate the TV only with 120 V AC. sections. We recommend that you carefully for the models listed below. Before reading, review the contents of each section in the check the model number located on the front • The plug is designed, for safety purposes, order presented to ensure that you fully of this manual or on the rear of your TV. to fit in the wall outlet only one way. If understand the operation of your new TV. you are unable to insert the plug fully into 1 Connecting and Installing the TV Model KV-35S45 is used for menu and the outlet, contact your dealer. illustration purposes. Differences in This section guides you through your • If any liquid or solid object should fall operation are indicated in the text; for initial set up. It shows how to connect to inside the cabinet, unplug the TV example, "KV-35S45 only". your antenna or cable, and connect any immediately and have it checked by qualified personnel before operating it accessories or components. further. 2 Basic Set Up • If you will not be using the TV for several This section teaches you the basic skills ,od,,/Z!//i/,I/ days, disconnect power by pulling the needed to operate your new TV. It shows plug itself. Never pull on the cord. you how to operate special functions of the remote control. For details concerning safety precautions, see the 3 -Jl,J,J'!KV-32S65 • • • supplied leaflet "IMPORTANT SAFEGUARDS". Using your New TV This section shows you how to begin KV-32V65 • • • • Installing using your new TV. It shows how to use KV-35S45 • • To prevent internal heat build-up, do not the Easy Set Up Guide feature, and how to block the ventilation openings. use your remote control. _v-3sv6sL I • I " L _" ! " I • Do not install the TV in a hot or humid 4 Using your Menus place, or in a place subject to excessive This section teaches you how to access dust or mechanical vibration. on-screen menus and adjust your TV's settings. Instructions in this manual are written for the remote control. Similar controls may befound on the TV console.

3 Connecting and Installing the TV

Making Connections

Refer to the table below, it will direct you to the diagram suitable to the comporlents you will be connecting. ! If you will b_ cor_w_tjng ..... £_ _, ,

Cable or antenna only 5 Cable and antenna (KV-32S65, 32V65, 35S65, 35V65 only) 5 Cable box 6

Cable box and cable to view scrambled channels (KV-32S65, 32V65, 35S65, 35V65 only) 6 VCR and cable or antenna 7

VCR and cable box 7

Direct Broadcast Satellite Receiver (DBS) 8

VCR and Direct Broadcast Satellite Receiver (DBS) 8

Digital Versatile Disc player (DVD) 9

Audio system 9 A / V receiver 10

T*'_oVCR's for tape editing {KV-32V40, 32V65, 35V65 only) 10

Camcorder to view tapes 11 S-Link connections (KV-32S65, 32V65, 35S65, 35V65 only) 12 4 Note Cable or Antenna Connections 7S-ohm coaxial cable c • In order to receive channels with an • VHF _ ""_ Connecting directly to cable or an _J_ (Rear of TV) antenr_a, you will need to turn your CABLE antenna to OFF (see page 26) and perform the AUTO PROGRAM function. The connection you choose will depend on the ond EAC-66 U/V mixer cable found in your home. Newer homes will Inot supplied) be equipped with standard coaxial cable • UHF _J (see A); older homes will probably have 300-ohm twin lead cable 300-ohm twin lead cable (see B); still other homes may contain both (see C). Cable and antenna A • KV-32S65,32V65,35S65,35V65 only 7S-ohm (Rear of TV) • VHF only If your cable provider does not feature local coaxialcable VHF/UHF Gr channels, you may find this set up convenient • VHF/UHF for viewing both local and cable channels. or • Cable Select cable or antenna mode by pressing ANT on the remote control. You will be able B 300-ohm twin (Rear of TV) to alternate between the two input sources. • VHF only lead cable VHF/UHF (Rearof TV) • UHF only CATVcable AUX or • VHF/UF_F (No connection "TO TO CONVERTER_._ Antenna connector CONVERTER" in this case)

Antenna cable - VHF/UHF Connecting and Installing the TV (continued)

Cable Box Connections If you will be controlling all channel selection Some pay cable TV systems use scrambled or through your cable box, you should consider using encoded signals that require a cable box to bthe CHANNEL FIX feature discussed on page 26. view all channels. (Rear of TV) Cable VHF/UHF Cable box 1 Connect the coaxial connector from your cable to the IN on your cable box. 2 Using a coaxial cable, connect OUT on IN _-_OUT your cable box to VHF/UHF on your TV. Cable box

Cable box and cable

• KV-32S65, 32V65, 35S65, 35V65 only like to switch between the A UX and normal (CATV) input you should considerIf you areusingconnectingthe CHANNELa cable boxFIX featurethrough discussedthe AUX oninputpageand26.would [ For this set up, you can switch between scrambled channels (through your cable box), and normal (CATV) channels by pressing Cab{e I_.x (Rear of TV) ANT on your remote control. _ AUX Notes • Your Sony remote control can be programmed to operate your cable box. channels..._ ]_C_=z]_:_ TO-CONvERTER (see page 32) 75-ohm coaxial ,_ (signal)

• When using PIP, you cannot view the cable (not supplied) VHF/UHF AUX input in the window picture. CATVcable lip "4" (unscrambted channets) PressingANT switches between these inputs, Disconnect all power sources before making any connections. VCR Connections (Rear of TV) VCR must be connected and Connecting an antenna/cable TV turned on to operate PIP system with a VCR (KV-32S4_, 3S$45 only). 1 Attach the coaxial connector from your cable Coaxial cable or antenna to IN on your VCR. 2 Using A/V connectors, connect AUDIO and VIDEO OUT on your VCR to AUDIO and VCR VIDEO IN on your TV.* [red) 3 Using a coaxial connector, connect OUT on (white) lyellow) your VCR to VHF/UHF on your TV.

" If you are connecting a monaural VCR, connect only the single white audio output to the left input on your TV, VMC-810S/820S (not supplied)

Connecting a VCR and TV with a For optimum picture quality, use S WDEO instead of I (Rear of TV) cable box the yellow A/V cable. $ Wdeo does not provide sound, your audio connectors must still be connected. You will need a splitter (not supplied) for the following con_ection. w_u._ '_ ' 1 1 Connect the single (input) jack of the splitter Coaxialcable to your incoming cable connection. Connect the other two (output) jacks (using coaxial cable) to IN on your cable box and VHF/UHF on your TV. T 6°I 2 Using a coaxial connector, connect OUT on AUDIO-R(red) AUDIO-L (white) your cable box to IN on your VCR. VCR 3 Using A/V connectors, connect AUDIO and VIDEO (yellow) VIDEO OUT on your VCR to AUDIO and I VMC-810S/820S (not supplied) VIDEO IN on your TV. Cable Splitter Cable box (not supplied) Ill Connecting and Installing the TV (continued) Disconnect all power sources before making any connections.

DBS Connections Cable/Antenna (Rear of TV) For optimum picture quality, use S VIDEO | Connecting a DBS (Direct instead of the yellow A/V cable. S Video does 2 I not provide sound, your audio connectors | Broadcast Satellite) receiver must still be connected, i I 1 Connect the cable from ),our satellite antenna to your DBS receiver. OBS receiver 1 b,*_.... v.,,_ I 2 Attach the coaxial connector from your cable or antenna to VHF]UHF on your TV. antenna [ .... _-_ I cable w • • 3 Using A/V connectors, connect AUDIO _ AUDIO2L (white) and VIDEO OUT on vour DBS receiver to

AUDIO and VIDEO IN on your TV. -'- VIDEO (yellow)

l Connecting a DBS (Direct Broadcast VMC-810S/820S (not supplied) Satellite) receiver and a VCR

1 Connect the cable from your satellite VMC-810S/820S (not supplied) Cable/Antenna (Rear of TV) antenna to your DBS receiver. 2 Attach the coaxial connector from your cable or antenna to VHF/UHF IN on your I VCR. IHF AUO_Oj T 3 Using a coaxial connector, connect VHF/UHF OUT on your VCR to

VHF/UHF on your TV. DBS receiver 4 Using A/V connectors, connect AUDIO AUDIO-R (red) and VIDEO OUT on your DBS receiver to AUDIO and VIDEO IN on your VCR. _ _ AUDIO-I. (whitel control will allow you to view from _ VIDEO (yellow) Pressing TV/VIDEO on the remote 5 Using A/V connectors, connect AUDIO the DBS or VCR. T and VIDEO OUT on your VCR to AUDIO VMC-810S/820S (not supp}ied) and VIDEO IN on your TV 8 Disconnect all power sources before making any connections. Additional Connections (Rear of TV) For optimum picture quality, use S VIDEO The following connections are for accessories instead of the yellow AIV cable. S Video does not provide sound, your audio that will enhance your viewing options. connectors must still be connected...... 22o , Connecting a DVD Player I e_4@@,_ _ /I 1 Using A/V connectors, connect LINE OUT (Rear of DVD player) on your DVD to VIDEO IN on your TV. UNE _

AUDIO-L (white) VIDEO (yellow) _ AUDIO-R (red)

i VMC-810S/820S (not supplied)

Connecting an audio system (Rear of TV) For enhanced sound, connect your audio system to your TV. 1 Using AUDIO connectors, connect AUDIO RK-74A OUT on your TV to one of the unused line I o _t_@_®V_"/[ Auo,o-,(white} /not supplied) inputs (e.g. TV, AUX, TAPE 2) on your I stereo. 2 Set your stereo to the chosen line input. L _! AUDIO.R(red) Refer to page 24 of this manual for additional audio setup instructions. 2 Connecting and Installing the TV (continued) Disconnect all power sources before making any connections. Connecting an AN receiver

• KV-32V65, 35V65 only i VMC+IOHG/30HG (not supplied) 1 Using A/V cables, cormect TV OUT on your VIDEO ( "IV to TV IN on your A/V receiver. 2 Using a single video connector, connect Monitor OUT on your A/V receiver to A/V outputs VIDEO 1 IN on your TV.

Tip "_" You may want to use CHANNEL FIX to set your TV's input to the A/V receiver.Seepage 26.

A/V receiver putt

r VMC-810S/820S (not supplied)

Connecting two VCRs You cannot change video • KV-32V40, 32V65, 35V65 only inputs while editing using (Rear of KV-35V65) MONITOR OUT. MONITOR OUT gives you the ability to use a second VCR to record a program being played by the primary VCR or to perform tape editing and dubbing. ] Connect the VCR intended for playback using the setup instructions on page 7 of VCRifo: piiyba{k) VCR (for recording) this manual. 2 Using A/V connectors, connect AUDIO and VIDEO IN on your VCR intended for AUDIO-L (white) recording to MONITOR AUDIO and 2_j__ __ {: _ AUDIO-RVIDEO (yellow)(red) VIDEO OUT on your TV. VMC 8!05/820b (rl_t supplied) VMC-81051820S (not supplied)

10 Disconnect all power sources before making any connections. Connecting a camcorder I Ifyou have an S VIDEO equipped I This coruxection is convenient for viewing a camcorder, you can use an $ Video picture directly from your camcorder. I cable for optimum picture quality. I

Using A/V connectors, connect AUDIO and (Front o_ KV-32V40*, 32V65, 35V65 on_y) VIDEO OUT on your camcorder to AUDIO and VIDEO IN on your TV. Connection can also be made directly to your A/V input located on the rear of your 'IV. Note VIDEO (yellow) _ _ _-- AUDIO-R (red) • If you are connecting a monaural camcorder, !_ _-- AUDIO-L (white) connect only the single white audio output to the left input on your "IV. __=_AV output r T

(not suppl_ed)

• KV-32V40 does Jzothave S VIDEO on the front panel

11 Connecting and Installing the TV (continued)

Disconnect all power sources before making any connections. S-Link connections Connect to the CONTROL ]

• KV-32S65, 32V65, 35S65, 35V65 only S-IN on your VCR. I ' 1.[. vmc-_'os/82os S-Link is designed to allow your Sony components to "communicate". (Rear of KV-35V65) Connecting S-Link to a VCR VIDEO (yellow) _ VCR S-Link will automatically power on the TV and switch to the correct video input when a tape is inserted in the VCR. 1 Using A/V connectors, connect AUDIO RK-G69HG t and VIDEO OUT on your VCR to AUDIO (not supplied) and VIDEO IN on your TV. 2 2 Using an S-Link connector (mono mini plug), connect S-LINK/CONTROL S-IN on your VCR to S-LINK on your TV.

The S-Link connector must be in the same VIDEO-IN jacks as the A/V cables Connecting S-Link to a DBS on your TV. S-Link will automatically power on the TV DBS _eceivel (Rear of KV-3SV65) and switch to the correct video input when you power on the DBS. Antenna 1 Using A/V connectors, connect AUDIO Cable _ J_,--d,-_- AUDIO - R (red) and VIDEO OUT on your DBS to AUDIO _ _-AUDIO-L (white) _l_-- and VIDEO IN on your TV. t '_-wDEo (ye,owl__.=>_ 2 2 Using an S-Link connector (mono mini plug), connect S-LINK on your DBS to (not supplied)[ JMC-810S/820S (not supplied}- S-LINK on your TV.

12 _H Basic Set Up

On-screen help/instructions Inserting batteries Using the remote control move & select buttons Several menu windows will provide prompts Insert two size AA (R6) batteries (supplied) by and instructions to assist you in navigating matching the + and - on the batteries to the through the different functions. When diagram inside the battery compartment. presented, use these to supplement the instructions in this manual.

Notes The supplied remote control has "arrow" • Remove the batteries to avoid damage buttons (4,, _, _., ._) which allow for from possible battery leakage whenever movement of the on-screen selector. Pressing you anticipate that the remote control will on the outer buttons will cause the selector to not be used for an extended period. move in the corresponding directon. Pressing • Handle the remote control with care. the center button ((_)) will select the item. Avoid dropping it, getting it wet, or Adjustment bars placing it in direct sunlight, near a heater, or where the humidity is high. When menu items present an adjustment bar • Your remote control can be programmed to ( _ or _), use the arrow buttons to operate most video equipment. (see page 30) change the setting.

13 Using Your New TV

Using the buttons on the front of the TV: 3 Press VOL - to continue or TV/VIDEO for Setting up the TV automatically a DEMO of functions and menus. s_uPW;_lOeO -vogue. -CHaNNB.. _OWER The Easy Setup Guide allows you to set the o 0 IZIZIIZEI-G on-screen language and set all receivable -- VOLUME + channels in one step. For KV-32V65, 35V65, the control buttons are The Easy Setup Guide feature does not apply for located on the top of the TV. AUTO PROGRAM installations that use a cable boxfor all channel 1 Press POWER to turn on the TV. selection. The Easy Setup Guide screen appears. To set up the TV manually, refer to "Using the

SET UP menu" on page 26. ENGLISH : [CH+] AUTO PROGRAM appears and the TV starts scanning and presetting channels Tips "_" POWER ESPANOL : I[CH-]] AUTO SET UP: VOL- automatically. If the TV receives cable TV DEMO : [W/VIDEO] • Perfvrmthisfunctionduringth_day, withtheantenna channels, CABLE is set ON automatically. FirstFRAN_AISplease : connectVOL+ and/orcableproperlyconnected,toensurethatallavailable cable/antenna. channelswillbebroadcastingandreceivable. Press ISET UPI to exit To perform AUTO SET UP again • TheTVmustbesettotheTVinputtoexecuteAUTO Press the SET UP button on the TV and follow PROGRAM,PressTV/VIDEOuntilachannel 2 Press CH + to select ENGLISH screens, steps 2-3. numberappears. CH - to select ESPANOL screens • If your cableorantenna is connected toAUX, press Notes ANT untilAUX appearsnexttothe channelnumber. or VOL + to select FRAN_AIS screens. (KV-32S65, 32V65, 35S65, 35V65 only) • When you perform AUTO PROGRAM, -CHANNEL+ your CHANNEL FIX, CHANNEL BLOCK, and ON/OFF TIMER settings will be erased. To reset your TV to factory settings, turn the TV on. Then, while pressing the RESET button on your remote control, press the POWER key on your TV. The TV will turn itself off, then back on. 14 Watching the TV _._ ILLUSTRATIONREFEROFTOTHE All of the TV features can be accessed via the remote REMOTE CONTROL ON THE control. The following chart will explain the function INSIDE FRONT COVER OF of the buttons found on your remote control. THIS MANUAL AS YOU REVIEW THIS CHART

_WER _ovo o_/_ Press when you want to turn equipment on and off. CZ)

-- FU,,_T,O,-- Press when you want to control connected components with your remote '_(_ C_) control. (see pages 30-32 for instructions on programming your remote control)

(_). (_ Use for direct channel selection. Press 0-9 to select a channel, the channel will change after 2 seconds, or you can press ENTER for immediate selection.

GH

Keeping the CH + or- pressed allows you to rapidly scan to the desired channel, Press to scan through the channels.

JouP Press to alternate or jump back and forth between two channels. You can jump (_) between the last two channels selected with the 0-9 keys.

MUTING

O pressPress VOLto mute+ totherestoresoundsound.(MUTING will appear on the screen). Press again or

SLEEP Press repeatedly until the TV displays the approximate time in minutes (30, 60, or 90) that you want the TV to remain on before shutting off automatically. Cancel by pressing until SLEEP OFF appears.

15 Using Your New. i V (co ,,t nued)

CAPTION VISION CHANNEL SET UP fCIosed Caption) CHANNEL BLOCK Press repeatedly to cycle through available displays: FAVORITE CHANNEL VIDEO LABEL Status _CAPTION VISION: LANGUAGE: ENGLISH o,sPu_y Channel number, current time, channel caption (if set) are displayed. TILT CORRECTtON: 0 CAPTION VISION SET_MENUUP 1 Closed Captioning will be displayed if the broadcaster offers this service. Select _ Exlt (see right) To cancel the display, press DISPLAY until DISPLAY OFF appears. CAPTION VISION can be used for programs Press repeatedly to cycle through available video inputs: that are broadcast with closed caption. w_woEo TM and VIDEO 1 (KV-32S40 only) "rv, VIDEO 1 and VIDEO 2 (KV-32S45, 32S65, 35S40, 35S45, 35S65 only) CC1, 2, 3 or 4 TV, VIDEO 1, VIDEO 2 and VIDEO 3 (KV-32V40, 32V65, 35V65 only) Shows you a printed version of the dialog or sound effects of a program. (The mode should Press to change the VHF/UHF input to the AUX input. (KV-32S65, 32V65, 35S65, be set to CC1 for most programs) A_ 35V65 only) (_ Press to change to the TV input. (KV-32S40, 32S45, 32V40, 35S40, 35S45 only) TEXT1, 2, 3 or 4 (AUX tnpdt) For detailed connection information, see "Cable and antenna" or "Cable box and Shows you network/station information cable" on pages 5-6. presented using either half or the whole screen. WNrR Press when you are finished using a VCR and you want to switch to the "IV input. XDS (Extended Data Service) + O Your VCR power will remain on. Shows a network name, program name, .TS Press this button to cycle through the Multi-channel TV Sound (MTS) options: program length, and time of the show ifthe O STEREO, SAP, MONO. (see page 24) broadcaster offers this service. GUIDE GUIDE is a feature of DBS, refer to your DBS operation instructions. Note SYSTEMO_F The SYSTEM OFF button allows you to power off all Sony equipment at once. • Poor reception of TV programs can cause (_ (KV-32S45, 32S65, 32V65, 35S45, 35S65, 35V65 only) errors in CAPTION VISION and XDS. Press to turn ON or OFF one of the following audio effects: Captions may appear with a white box or other errors instead of intended text. (_) SURROUND: KV-32S40, 32S45, 32S65, 35S40, 35S45, 35S65 only AUTO VOLUME: KV-32V40, 32V65, 35V65 only w c_s See page 23 for more information on AUDIO settings. TV/DBS is a feature of DBS, refer to your DBS operating instructions. 16 Watching two programs at TEe seul_J of the main Main picture one time - PIP p_cture is _eceived through the TV The Picture-in-Picture (PIP) feature allows ";: picture you to view two channels simultaneously, one • ::r ' received through in the full size "main" picture and one in a the second tuner smaller "window" picture. --"_t'" REFER TO THE ILLUSTRATION OF picture Single Tuner PIP L.._: j THE REMOTE CONTROL ON THE • KV-32$45,35545only INSIDE FRONT COVER OF THIS If you have model KV-32S65, 32V65, 35S65 or MANUAL AS YOU REWEW THIS 35V65, see page 19. CHART These models are equipped with a single tuner. This simply means that a VCR must be connected and turned on for PIP to operate. PIP Press once to display the window picture (1/9 size). t il,_ _ _) Press again to reduce the size of the window picture (1/16 size). Press a third time to remove the window picture. To ensure a correct single tuner PIP connection make sure the following list is complete before using PIP: TVNIDEO Press repeatedly to cycle through available video inputs in the window: • AcableorantennaisconnectedtotheVCR _) TV, VIDEO 1, VIDEO 2 • The VCR is connected to your TV (see pages 5-7) • The VCR is turned on TVNIDEO Press repeatedly to cycle through available video inputs in the • The remote control has been programmed to operate main picture: the VCR (see page 30) "IV, VIDEO 1, VIDEO 2 Note AUDIO Press to alternate sound between the main picture and the window • You must press TV (FUNCTION) before (_) picture. A _ will appear for a few seconds to indicate which picture is you can control PIP with the yellow receiving sound. labeled buttons.

17 Using Your New TV (continued)

_^ • • CHANGING CHANNELS

CH Press to change the channel• You must press VTR/DVD (FUNCTION), then 1 Press TVNIDEO until you reach the TV input• 2 Press PIP (the window picture appears)• use the main CH +/- buttons to change channels in the window picture. (see right) To change the window picture: GH 1 Press VTR/DVD (FUNCTION). {(-I-_ POSITION Press to move the location of the window picture (counterclockwise) around the 2 Press the main CH +/- buttons f_,,,_

(_ main picture. to change channels. (,_

To change the main picture: FREEZE Press to freeze the window picture. Great for copying down phone numbers, 1 Press TV (FUNCTION). (_ addresses, recipes, etc. 2 Press the main CH +/- buttons to change Press FREEZE again to restore the picture. channels.

SWAP Press to switch the audio and video of the main picture and the window picture. Notes (_ Each time you press SWAP, the picture and sound of the two will be swapped. • If you have the same program in both the window and the main picture and cannot change the channel in the window; press TVNIDEO until you reach the TV input in the main picture. • Your remote control must be programmed to operate the VCR. (see page 30)

18 Watching two programs at one time - PIP (continued)

Dual Tuner PIP PIP Press once to display the window picture (1/9 size). •KV-32S65, 32V65, 35S65, 35V65 only Press again to reduce the size of the window picture (1/16 size). Press a third time to remove the window picture. If you have model KV-32S45 or 35545, see pages 17-18. Press repeatedly to cycle through available video inputs: These models are equipped with dual tuners. TVNIDEO TV, VIDEO 1, VIDEO 2, VIDEO 3 This means that PIP is "ready to use". ®

The sound of the main Main picture AUDIO Press to alternate sound between the main picture and the window picture. oicture is received / received through (_ A _ will appear for a few seconds to indicate which picture is receiving sound. / the TV Main _ _ 61 / Window picture TVNTR fJl(ttlre I _ _ _ received through Press to change the TV channel in the window picture. the second tuner +© CH Window picture -© POSITION Press to move the location of the window picture (counterclockwise) around the Notes (_ main picture. • Youmustp_ssTV (FUNCTION)before FREEZE Press to freeze the window picture. Great for copying down phone numbers, you can control PIP with the yellow labeled buttons. (_ addresses, recipes, etc. Press FREEZE again to restore the picture. • The AUX input cannot be viewed in the SWAP Press to switch the audio and video of the main picture and the window picture. window picture. (_) Each time you press SWAP, the picture and sound of the two will be swapped.

19 Using Your Menus

3 Press • or • to move to the desired option. 5 Press • or • to make your selection and Learning menu selection press (Z). Use the MENU button to access a menu and I'CHANNEL SET UP CHANNEL BLOCK CHANNEL SET UP use the arrow buttons (• or 4) to alter settings. FAVORtTE CHANNEL VIDEO LABEL _' CABLE: ON CAPTION VISION: _ 1 CHANNEL FIX: OFF Use the following example, in which we LANGUAGE: ENGLISH _ SETUPTILT CORRECTION: O AUTO P_LOGRAM activate the CABLE, to learn how to modify _MENU CHANN SKIP/ADD settings. DMBNU MOVe_ Select[_ Exit_ I CHANNEL CAPTION ] 1 Press the MENU button. Move_ Sel_t_ Exit_ 4 Press QD. The main menu appears. Options for your selection will be When you are finished making changes to the highlighted. selected menu, choose D MENU to return to MENU MODE :VIVID the main menu, BRIGHTNESS ,,DEOCOLORPICTURE HUE CABLE: OFF I,SETUPCHANNEL SET UP I _MENU CHANNEL FIX: OFF CHANNEL BLOCK AUTO PROGRAM CHANNEL SKIP/ADD SHARPNESS MBF_I l VIDEO LABEL Move_ Seleet(_ Exit_ CHANNEL CAPTION CAPTON V S ON _1 _MENU LANGUAGE: ENGLISH TJLTCORRECTJON: 0 Move_[_ SelectG_ Exil_ _MENU 2 Press t or • to highlight the desired menu FAVORITE CHANNEL I Move_ SiLect{_} ExJt_ (in this case SET UP _]) and press (_23 to select it. Notes • Pressing MENU on the remote control will allow you to exit from the menus at any CHANNEL BLOCK FAVORITE CHANNEL time. VIDEO LABEL CAPTION VISION: _ 1 • If any menu items are "grayed out", press TILT CORRECTION: 0 the ANT button on your remote control CHANNELLANGUAGE:_MENU SETENGLISHUP J until a channel number appears. Move[_ Setect[_ Exit_

2O The VIDEO menu will allow you to make adjustments to your picture settings. _E : VNID Quick start to the menus pI_RE m BrlIGHTNESS p It will also allow you to customize the picture MODE based on the type of COLOR _ HUE _ program you are viewing. The following is a guide to your menus. It will SHARPNESS _ VIDEO give you a quick start to the options available _MENU for setting up your TV. MO_ SekJ_{_ E_at_ The AUDIO menu offers enhanced audio options such as listening to second The menus shown arefor model KV-35S45, your TREBLE menus may look different from those illustrated. audio programming (SAP), or customizing the EFFECT of the sound on your TV. EFFECT : OFF MTS : STEREO SPEAKER : ON For detailed information on using the remote AUDIO control to modify menu settings, refer to _M_IU "Learning menu selection" on page 20. The TIMER menu sets the clock on your TV and allows you to program your To select a menu: DAYLIGHT SAVI_: NO CURRENT TIME SEI ONOFE I_M E [t TV for scheduled viewing using the ON/OFF TIMER. _MENU Display _ Highlight _ Select

l! rIMeR CD

The SET UP menu provides several options for setting 1 CHANNEL SET UP I 5 up your channels, labeling your TVNIDEO inputs, CHANNEL BLCCK CABLE: ON FAVORITE CH_.NNEL CHANNEL FIX: OFF VIDEO LABEL and selecting the LANGUAGE of your menus. AUTO PROGRAM CAPTION VISK3N: _ 1 I-_NNEL SKIP/AOD LANGUAGE: E_LISH _HANNEL CAPTION I TILT C_RECTION: 0 _MENU The CHANNEL SET UP menu is a sub-menu which Mm,e_ _1(_] Exit_ provides further options for setting up your TV. I °-° 1

The Basic Menu provides quick access to frequently used settings.

21 Using Your Menus (continued)

Using the VIDEO [] menu MODE VIVID: Select for a vivid, bright picture for daytime viewing. Customized pictu,_. STANDARD: Select to receive a standard picture. MODE : VIVID w_w,_!j MOVIE: Select for night time movie viewing. PICTURE BRIGHTNESS ellmlmm Adjustment COLOR PICTURE Adjust left to decrease picture contrast and soften the color. VIDEOHUE _ 1} bars SHARPNESS Picturecontrast Adjust right to increase picture contrast and create more vivid color.

BRIGHTNESS Adjust left to darken the picture. Mova__MENUSelect(_ Exit_ J P_ctureadjustment Adjust right to brighten the picture.

For detailed information on using the remote COLOR Adjust left to decrease color intensity or saturation. control to modify menu settings, refer to Colo; saturat;on Adjust right to increase color intensity or saturation. "Learning menu selection" on page 20. HUE Adjust left to increase the red tones. To select the VIDEO [] menu: Color tones Adjust right to decrease the red tones.

Display _ Highlight _ _ Select SHARPNESS Adjust left to soften the picture detail. _'Jcturedetail Adjust right to sharpen the picture detail.

To restore the factory VIDEO settings PressRESETwhile the VIDEO menu is displayed.

22 Using the AUDIO ._ menu TREBLE Adjust left or right to decrease or increase higher pitched sound.

BASS Adjust left or right to decrease or increase low pitched sounds. Adjustment BASS I1_ BALANCE ,===4_.=m bars EFFECT : OFF BALANCE Adjust left or right to emphasize right and left speaker volume. MTS : STEREO SPEAKER : ON AUTO VOLUME (KV-32V40, 32V65, 35V65 only) TRESLE_MENU ,=--1} Stab_/_zesvolume ON: Select to stabilize the volume. Move_ SelectGZ] Exit_ OFF: Select to turn AUTO VOLUME off. Press (_) for direct se/ectlon of AUTO VOLUME settings. For detailed information on using the remote EFFECT Press • or • to select one of these customized effects: control to modify menu settings, refer to Enhanced audio SURROUND: Simulates theater quality sound (only for stereo programs). "Learning menu selection" on page 20. optsons (KV-32S40, 32S45, 32S65, 35S40, 35S45, 35S65 only) To select the AUDIO ._ menu: Press _ for direct se/ection of SURROUND settings. SIMULATED: Adds a stereo-like effect to mono programs. Display _ Highlight_ m Select (KV-32V40, 32V65, 35V65 only) SRS: Produces a dynamic three dimensional sound for stereo audio signals. .... @ ® (KV-32V40, 32V65, 35V65 only)

To restore the factory AUDIO settings Press RESET while the AUDIO menu is displayed.

23 Using Your Menus (continued)

Using the AUDIO menu MTS MTS: Press 4. or _, to select one of the following options: (continued) Et_oy stereo STEREO: Select when viewing a broadcast in stereo. bilhlgua/ and mono SAP: Select to listen to bilingual broadcast. (Non-SAP programs will be muted pro_fat;3s when this feature is selected) MONO: Select to reduce noise during stereo broadcasts for areas of weak reception. Quick MT$ access: Press MTS on your remote contre/ to cycle through the MTS options.

SPEAKER ON: Select to listen to the sound from the TV speakers with or without a Custom selection of separate stereo system. For detailed information on using the remote aLIdlo output source OFF: Select to turn off the TV speakers and listen to the TV's sound only through control to modify menu settings, refer to external audio system speakers. "Learning menu selection" on page 20. AUDIO OUT AUDIO OUT can only be set when SPEAKER is set to OFF, To select the AUDIO ._ menu: Use to control the VARIABLE: Sound output varies according to the TV settings, TVs _otume through Useful when you want to use your TV's remote control to adjust the output of a Display tomb Highlight _ _ Select ,7 StC¢_O separate audio system. FIXED: Sound output is held at a fixed level through your stereo. C_D.... @ @ Use your A/V receiver's remote control to adjust the volume. 5

24 Using the TIMER (_) menu DAYLIGHT Spring: Select YES to compensate for Daylight Saving Time. SAVING The current time moves one hour ahead. 1 DAYLIGHT SAVING: NO I Automatically adju._ts Fall: Select NO at the end of Daylight Saving Time. CURRENT TIME SET ON/OFF TIMER the time The current time moves back one hour. _MENU

CURRENT With the CURRENT TIME SET menu open: CURRENT TIME SET

___ - --:- -- AM TIME SET 1 Press _. - - - - -:- - AM Move_ Eelect(_}_ Exit_ 1 2 Press t or • until the current day is displayed. _MENU Necessary 1of the ON!OFF TIMER Press CD to select. For detailed information on using the remote 3 Press • or • until the current hour and AM/PM is displayed. Press _ to select. control to modify menu settings, refer to Move_ Salect_ Exit_ "Learning menu selection" on page 20. 4 Press • or • until the current minute is displayed. press _. To select the TIMER Q menu: The clock is set. Press MENU to exit. Any loss of power wi// cause these settings to be erased. Display _ Highiight(_=_ Select

ON/OFF TIMER With the ON/OFF TIMER menu open: ON/OFF TIMER .... ® Wake up or 1 Press _. '5 scheduled vtewmg 2 Press • or • until the desired day or range of days -: - AM -h CH--- is displayed. Press _ to select. _MENU 3 Indicate the time that you want the TV to turn on by To cancel the ON/OFF TIMER SUN 12:00 AM pressing • or • and then (E_. Move_ Select[_ ExJt_ function 4 Set the time duration (maximum of 6 hours) by Press RESET while the ON/OFF TIMER pressing • or • and then CD. menu is displayed. 5 Press • or • until you reach the desired channel. Press _ to select. Tip "_" The ON/OFF TIMER is now set. Press MENU to exit. Set DAYLIGHT SAVING time before setting the clock. When you perform AUTO PROGRAM, all ON/OFF TIMER settings will be erased.

25 Using Your Menus (continued)

Using the SET UP [_ menu CHANNEL With the CHANNEL SET UP menu open: CHANNELsEnrUP SET UP Press • or _. to access a feature, then press _. _ CABLE:ON CHANNEL FIX: OFF CHANNER_ SKIp/ADD CHANNEL SET UP Basic set up CABLE: Select ON it your TV is connected to a cable AUTOP O_3RAM CHANNEL BLOCK FAVORITE CHANNEL options for system. CHANNEL CAPTION VIDEO LABEL _MEt_U CAPTION VISION: _ 1 viewing LANGUAGE: ENGLISH CHANNEL FIX: Prass _, or S to sst the TV's input to one _ve_ SeleCtC}_Exit_ SETTILTUPCORRECTION: 0 of the following options: _MENU 2-6: When a cable box is connected to the VHFJUHF input. Press DBS]CABLE

Move_ SeleCt_ Exit_ (FUNCTION) and then CH +/- to change channels through your cable box. AUX 2-6: When a cable box is connected to AUX and a cable or antenna is For detailed information on using the remote connected to VHF/UHF. You can alternate between the two inputs by pressing control to modify menu settings, refer to ANT on the remote control. (KV-32S65, 32V65, 35S65, 35V65 only) "Learning menu selection" on page 20. VIDEO 1 : When you have connected video equipment (e.g. AN receiver) and To select the SET UP _ menu: you want the TV input fixed to it. You will be able to alternate between video sources using the AN receiver. Display _ Highlight _=_11, Select OFF: When you want to turn CHANNEL FIX off. AUTO PROGRAM: Instructs the TV to program all receivable channels. .- @ ® CHANNEL SKIP/ADD: With the CHANNEL SKIP/ADD window open: SKIP )ADD 5 1 Select the desired channel. _MENU 2 Press _ to SKIP or ADD (only one option will Use (0-9] or [CH */-1 Notes be available). I CHANNEL SKIP/ADD 33! • Tile FAVORITE CHANNEL feature is not CHANNEL CAPTION: Label up to 12 channels with their to seJ_,_tthe ehaane_ [ available for the AU× input. call letters (up to four letters). • Your remote control can be programmed to With the CHANNEL CAPTION menu open: 1 Press _ and then 4, or _. to access the desired operate your cable box. (see page 32) I*CHANNEL 33 channel, and press (_D again. CAPTION .... • After setting CABLE, you will need to run _MENL_ AUTO PROGRAM. 2 Press • or • to display the first letter or number

• ON/OFF TIMER and CHANNEL BLOCK of the caption and press CD to select it. CHANNEL CAPTION 1 settings will be erased when CHANNEL 3 Press _ to activate. To erase a caption, FIX is set. press RESET. 26 CHANNEL With the CHANNEL BLOCK window open: CHANNELBLOCK 1 Chcose 1 or2 and press G_. BLOCK )I.CH --- 2. CH --- Prevent child access 2 Press _ or $ to display the channel you want to block, press (3_ to activate. _MENU to certaill channels When you select the blocked channel, BLOCKED will appear on the screen. When you perfo/TnAUTO PROGRAM, your CHANNEL BLOCK settings w#lbe erasecL Select a position To erase the CHANNEL BLOCK settthgs,press RESET while the CHANNEL BLOCK menu is displayed. Move_ Select[_ E_

FAVORITE Setting FAVORITE CHANNEL: FAVORITECHANNEL CHANNEL 1 Press _ and then tl. or _. to select AUTO or MANUAL. (Selecting AUTO will display the last _ MODE: AUTO 1. Quick accessto five channels chosen with the remote COntrol's0-9 buttons.) 2, favorstechannels 2 Press $ or _ to move tha cursor to l. 2, 3. 4 or 5 and press (3_. 541 : 3 Press # or • to access the desired channel and press (E_. _MENU For KV-32S65, 32V65, 35S65, 35V65 only, you can preview your favorite channels in the window picture. Move_ Sel_ _ Ex__a To do SO, set PREVIEW to ON.

Using FAVORITE CHANNEL: 1 Press C_ when in normal viewing mode. Your FAVORITE CHANNEL options will appear. _1 2 Press t or q. to access the channel you want to watch, and press (_. _ _ For models KV-32S65, 32V65, 35S65, 35V65 only, if PREVIEW is ON, a window picture displays your _ favorite channels as you cycle through the options.

27 II Using Your Menus (continued)

Using the SET UP menu VIDEO LABEL With the VIDEO LABEL window open: V,DEOL_EL Label connected 1 Press ,I. or _. to access the input mode you want _WDEO_: VHS (continued) VIDEO 2 : GAME equipment for easy to label and press (3_. _MENU _ET UP 2 Press • or • to choose the label and press (3_. CHANNEL SET UP recognition CHANNEL BLOCK FAVORITE CHANNEL VIDEO LABEL Options: VIDEO LABEL VIDEO 1: VHS, 8mm, BETA, LD, GAME, DBS, DVD, Mo_m Se_t_3_ EX,_ CAPTION VISION: _ 1 LANGUAGE: ENGLISH WEB, RECEIVER, DTV. TILT CORRECTION: 0 _MENU VIDEO 2/3: VHS, 8mm, BETA, LD, GAME, DBS, DVD, WEB, RECEIVER, OTM, SKIP. When VIDEO LABEL is set to WEB, the picture will darken, creating an ideal For detailed information on using the remote picture for Web TV viewing, ff you select SKIP, your TV will skip this connection control to modify menu settings, refer to when you cycle through video sources using the TV/VIDEO button. "Learning menu selection" on page 20. LANGUAGE Select from available languages to display all menus in your language of choice. To select the SET UP I_ menu: TILT (KV-35S40, 35S45, 35S65, 35V65 only) Display _m_ Highlight_m Select CORRECTION Press ,l. or _, to correct any tilt of the picture between +5 and -5 and press CE_.

28 Using the Basic _ Menu Basic Menu With the Basic Menu window open: Quick acess to 1 Press • or t to access the feature you want frequently used to change. settings 2 press _ to select. VIDEO MODE: Press 4, or • to set the "IV to one of Basic Menu the following settings: I! Sscnpe to VIVID, STANDARD, MOVIE (see page 22) Select _ Exit PICTURE: Press t or _, to adjust the picture contrast. (see page 22) AUDIO: Press _-or _, to set your audio to one of the following settings: For detailed information on using the remote (see page 23) control to modify menu settings, refer to SURROUND: KV-32B40, 32S45, 32S65, 35S40, 35S45, 35S65 only "Learning menu selection" on page 20. SRS/SIMULATEO: KV-32V40, 32V65, 35V65 only To select the Basic E_ Menu: ADVANCED MENU: Select when you want to return to the main menus.

Display _ HighJight _]'_]m=!l - Select

MENU ®

Note • The 'IV automatically displays the lest menu used when MENU is pressed.

29 Jm Operating Video Equipment

Goldstar 332 Tashiro 332 Programming the remote Hitachi 306. 304, 305.338 Tatung 314, 336, 337 tnstant Replay 309,308 Teec 314. 336, 338,337 You can use the supplied remote control to JC Penney 309, 305, 304, 330, 314, 336, 337 Technics 309,308 operate Sony or non-Sony video equipment. JVC 314, 336, 337, 345, 346, 347 Toshiba 312, 311 Kenwood 314, 336, 332, 337 Wards 327,328, 335, 331,332 ] Press CODE SET. LXI (Sears) 332, 305, 330, 335, 338 Yamaha 314, 330, 336, 337 Zenith 331 2 Press VTR/DVD (FUNCTION), Magnavox 308, 309, 310 Marentz 314, 336, 337 3 Use the 0-9 buttons to key in the Matte 332 Operatinga VCR Buttons on the manufacturer's code number from the Memorex 309, 335 remote control Minolta 305. 304 following chart. To tum on or off Mitaubishi/MGA 323, 324, 325, 326 PressVTR/DVD (POWER). 4 Press ENTER. Multitech 325, 338, 321 To select a channel Press the0 - 9 buttons. NEC 314, 336, 337 directly VCR code numbers Olympic 309, 308 To change Press CH +/-. Optimus 327 channels Manufacturer Code Panasonic 308, 309, 306, 307 To record Sony 301,302, 303 Pentax 305, 304 Press _ and • Admiral (M. Ward) 327 Phi_,o 308, 309 simultaneously. Aiwe 338, 344 Philips 308, 308, 310 TO play Press le_. Pioneer 308 Audio Dynamic 314, 337 To stop PressII, Broksonic 319, 317 Quasar 308, 309, 306 Canon 309, 308 RCNPROSCAN 304, 305, 308, 309, 311, To fast forward Press IH_. Citizen 332 312, 313, 310, 329 To rewind the tape Press -_1. Realistic 309, 330, 328, 335, 324, 338 Craig 302, 332 To pause Press II. Cdtedon 315 Sansui 314 Curtis Mathis 304, 338, 309 Samsung 322,313. 321 To resumenormalplayback, Daewoo 341,312, 309 Sanyo 330, 335 pressagain orpressI=,,-. DSX 314, 336, 337 Scott 312,313. 321,335, 323, 324, 325, 326 To scan Press _ or,4<1during Dimensia 304 Sharp 327, 328 playback. Emerson 319, 320, 316, 317, 318, 341 Shintom 315 To resume normalplayback, Fisher 330, 335 Signature 2000 (M. Ward) 338, 327 release the button. Fonai 338 SV2000 338 General Electdc 329, 304, 309 Sylvania 308, 309, 338, 310 TO change input PressTVNTR. Go Video 322, 339, 340 Symphonic 338 mode 3O l'ips "_" MDP (Multi Disc Player) DVD (Digital Versatile Disc) • in some rare cases, you may not be able to operate code numbers code numbers your non-Sony video equipment with the supplied Manufacturer Code Manufacturer Code remote control. In this case, please use the equipment's own remote control. Sony 701 Sony 751 Panasonic 704, 710 Panasonic 753 • When you remove the batteries, the code number may Pioneer 702 Pioneer 752 revert to the factory setting. RCA 755 Toshiba 754 • The code numbers for Sony VCR's are assigned at the Operating an MDP Buttons on the remote factory asfollows: control VHSVCR 301 To turn on or off Press VTR/DVD (POWER). Operating a DVD Buttons on the remote player control (preset code for the To play Press ID.-. To turn on or off Press VTR/DVD (POWER). supplied remote control) To stop Press I1. To play Press I_-. 8 mm VCR 302 To pause Press I1. To resume normal playback, To stop Press II, Beta, ED Beta VCRs 303 press again or press I_.-. To pause Press II. To scan Press _ or _ during To resume normal playback, playback. press again or press I1,.-. To resume normal playback, To scan Press _ or .<1,4during press I1_. playback. To search the chapter Press CH +/-. To resume normal playback, forward or backward press D_-. To search the Press CH +/-. Tip "_" chapter forward or backward If you will not be programming a DBS or cable box into To select chapters 0-9 + ENTER. the DBS/CABLE input, you can use it to program other directly video equipment (e.g. DVD, MDP, or second VCR) (see page 30) MENU Press to display DVD menu. To move cursor in Use your arrow buttons menu *, .I., _., ,_.

31 Operating a Cable Box or DB5 Receiver

If the remote control doesn't work Cable box code numbers Programming the remote • First, try repeating the setup procedures Manufacturer Code You can program the supplied remote control using the other codes listed for your Hamlin/Regal 222, 223, 224, 225, 226 to operate a cable box or DBS receiver. equipment. Jerrold/G. I. 201,202, 203, 204, 205, 206, 207, 208, 218 1 Press CODE SET. Tips "_" Oak 227, 228, 229 • !f more than one code number is listed, try entering 2 Press DBS/CABLE (FUNCTION). Panasonic 219, 220, 221 them one by one until you come to the correct code for Pioneer 214, 215 ] Use the 0-9 buttons to key in the your equipment. Sci_t ttific Atlanta 209,210,211 manufacturer's code number from the • If you enter a new code number, the code number you Tocom 216, 217 following chart. previously entered at that setting is erased. Zenith 212, 213 4 Press ENTER. • In some rare cases, you may not be able to operate your equipment with the supplied remote contro!. In For more details on operating the this case, use the equipment's supplied remote control. DBS receiver code numbers cable box or DBS receiver • Whenever you remove the batteries the code numbers may revert to the factory setting. Manufacturer Code Refer to the operating instructions that were Sony 80! (preset code for supplied with the equipment. remote control) General Electric 802 Hitachi 805 8O4 Hughes Panasonic 803 RCA/PROSCAN 802, 808 Toshiba 806, 807

32 Troubleshooting

Consult the table below; it suggests solutions to specific problems.

Cannot operate single tuner PIP • VCR may not be connected to your TV properly. • Ensure that you have set your VCR correctly. (see page 7) (KV-32S45, 35S45) • VCR may not be turned on. • Program your remote control to operate the VCR. • The remote control may not be programmed to (see page 30) operate the VCR.

A red light keeps flashing on the • Your TV may need service. • Call your local Sony service center. TV for more than a few seconds

TV makes a noise when turned • This is a normal function of your TV. on

Screen is not lit and there is no • Power cord may not be plugged in. • Press TV/VIDEO until you receive a channel. sound • Batteries may nut have been placed with the correct polarity. • TV/VIDEO setting may be incorrect.

Poor or no picture {screen lit), VIDEO menu settings may not be adjusted correctly. • Readjust your VIDEO menu settings.(see page 22) good sound Antenna/cable connections may be faulty. • Check your VIDEO LABEL settings. (see page 281 VIDEO LABEL inputs may be set to WEB. {This label darkens the screen for ideal WebTV viewing)

Good picture, no sound • Sound may be set to MUTING. i ° Press MUTE. • Your TV i'nay he set to SAP. • Check the MTS setting in the AUDIO menu. (see page 23) • Speaker may not be set correctly. • Check your SPEAKER settings. (see page 23)

No color • Color settings may not be adjusted correctly. Adjust the COLOR settings in the VIDEO menu. (see page 22)

33 Specifications

WhatiL_d _e Supplied accessories i Only snow and noise • CABLE may not be set correctly • Ensure that you have selected the Remote control RM-Y165 (1) appear on the screen in the SET UP menu. correct CABLE mode in the (KV-32S40, 32V40, 35S40 only) • Antenna/cable connections may SET UP menu. (see page 26) Remote control RM-Y167 ( 1) not be correct. • Press ANT on your remote (KV-32S45, 32S65, 32V65, 35S45, 35S65, • TV may be set to AUX mode. control to change the input mode. 35V65 only) (see page 16) Batteries size AA (R6) (2) Cannot receive upper • CABLE setting may not be correct • Ensure that CABLE is set to OFF channels (UHF) when in the SET UP menu. in the SET UP menu. (see page 26) using an antenna • Use AUTO PROGRAM to add Optional accessories receivable channels that are not Connecting cables presently in TV memory. (see VMC-810S/820S, VMC-720M, page 26) YC-15V/30V, RK-74A

Cannot receive any • CABLE setting may not be set • Ensure that CABLE is set to ON TV Stand SU-32A3, SU-35A3 channels when using correctly in the SET UP menu. in the SET UP menu. (see page 26) U/V mixer EAC-66 cable • Use AUTO PROGRAM to add receivable channels that are not presently in TV memory. (see page 26)

Cannot gain enough • Volume may not be adjusted on • Press TV (FUNCTION) and volume when using a your cable box. adjust the TV's volume. cable box

TV is fixed to one • CHANNEL FIX settings may not • Check your CHANNEL FIX channel be correct. settings. (see page 26)

If, after reading these operating instructions you have additional quest ons re a ed to the use of your Sony television, please catl our Direct Response Center at 1-800-222-SONY (7669). (U.S residents only)

34 KV- 32S40 32645 32S65 32V40 32V65 35640 35S45 35S65 35V65 Power _quirements 120V, 60 Hz 120 v, 66 Hz 120 V, 60 Hz 120V, 6OHz 120V, 60 Hz 120V, 60 Hz 120V, 60 Hz 120 V, 60 Hz 120V, 60 Hz Number of inputs/outputs Video 11 1 2 2 3 3 2 2 2 3 6 Video _ 1 1 1 1 2 1 1 1 2 Audio 3) 1 2 2 3 3 2 2 2 3 Audio out _ 1 1 1 1 1 1 1 1 1 Monitor out" 1 1 1 TV Out 1)3) 1 1 S-Unk - Yes Yes Yes Yes Speaker output (W_ 5Wx2 5Wx2 5Wx2 5Wx2 10Wx2 5Wx2 5Wx2 5Wx2 10Wx2 Power consumption ON) In use (Max.) 160W 180W 180W 180W 200W 210W 210W 210W 230W In standby 2W 2W 2W 2W 2W 2W 2W 2W 2W Dimensions (W/H/D) 791 x 707 x 791 x707x 791 x707x 821 x 675.3 x 821 x 675.3 x 870 x 761 x 870 x 761 x 870 x 761 x 920 x 730.8 x (ram) 604.5 mm 604.5 mm 604.5 mm 587 mm 587 mm 653 mm 653 mm 653 mm 641.8 mm (in) 31 x 27 '3/,6 31 x 27 W_6 31 x 27 W_ 32 3/8x 26 % 32 3/8x26 % 34 V. x30x 34'hx 30 x 34 V*x 30x 36'h x 28 3/4 x 23 3/4in. x 23 3/4in. x 23 3/4in. x 23 VBin. x 23 _h in. 25 5/ein. 25 %in. 25 %in. x 25 'h in. Weight (kg) 71.4 kg 72.7 kg 73 kg 70 kg 70 kg 83 kg 63 kg 83 kg 90 kg (Ibs) 157 Ibs 160 Ibs 160.5 Ibs 154 Ibs 154 Ibs 183 Ibs 183 Ibs 183 Ibs 203 Ibs T_:..;.;vii system Antenna _Lmerican TV standard, NTSC 75 ohm external terminal for VHF/UHF (O) ®SRS (SOUND RETRIEVAL SYSTEM) ! atimnel €overage Notes VHF: 2-13/UHF: 14 _9/CATV: 1 - 125 Picture tube Ii 1 Vp-p, 75 ohms unbalanced, sync negative The (e) SRS (SOUND RETRIEVAL SYSTEM) is manufactured by Sony Corporation under license Trmitron ®tube 2) Y: 1 Vp-p, 75 ohms unbalanced, sync negative Visible v_reen size C: 0.286 Vp-p (Burst signal), 75 ohms from SRS Labs, Inc. It is covered by U.S. Patent No. 32-inch pictuxe measured diagonally (KV-32640, 32645, 31 500 mVrms Impedance: 47 kilohms 4,748,669. Other U.S. and foreign patents pending. 32565, 32V40, 32V65 only) 35-inch picture measured diagonal]y (KV-35640, 35£45, 4) More than 408 mVrms at the maximum volume The word 'SRS' and the SRS symbol (@) are 356_, 35V65 only) setting (variable) registered trademarks of SRS Labs, Inc. A_ual screen size More than 408 mVrms (fix) 34-inchlcnp ictu re measured diagonally (KV-32640, 32645, Impedance: 50 kilohms Licensed by BBE Sound, Inc. under 32665, 32V40, 32V65 only) USP 4638258.4482866. BBE and BBE symbol are 37-inch picture measured diagonally (KV-35640, 35645, Design and specifications are subject to change trademarks of BBE Sound, Inc. 35665, 35V65 only) without notice, 35 g Index

A CAPTION VISION (closed caption) ...... 16 E Adjusting your menus ...... 20 CATV cable ...... 5 Easy Setup Guide ...... 14 ANT ...... 16 Coaxial cable ...... 5 Editing using MONITOR OUT ...... 10 Antenna cable ...... 5 CH +/-...... 15 EFFECT Antenna connector ...... 5 CHANNEL SKIP/ADD ...... 26 SIMULATED ...... 23 AUDIO _) button ...... 23 CHANNEL BLOCK ...... 27 SRS ...... 23 AUDIO menu operations .t CHANNEL CAPTION ...... 26 SURROUND ...... 23 AUDIO OUT ...... 24 CHANNEL FIX ...... 26 F AUTO VOLUME ...... 23 COLOR ...... 22 BALANCE ...... 23 Factory settings ...... 22, 23 Connecting TV to FAVORITE CHANNEL ...... 28 BASS ...... 23 Antenna ...... 5 EFFECT ...... 23 FAVORITE CHANNEL w/preview ...... 28 Audio system ...... 9 MTS ...... 24 FREEZE button ...... 13, 18, 19 A/V receiver ...... 10 SPEAKER ...... 24 Cable ...... 5 H TREBLE ...... 23 Cable box and cable ...... 6 HUE ...... 22 AUDIO OUT Camcorder ...... 11 I, J, K FIXED ...... 24 DBS receiver ...... 8 JUMP button ...... 13 VARIABLE ...... 24 DBS receiver and VCR ...... 8 AUTO PROGRAM ...... 26 L DVD player ...... 9 Language selection ...... 14, 28 AUX Hookup ...... 5 S-Link ...... 12 Learning menus A/V receiver ...... 10 Two VCRs ...... 10 AUDIO ...... 23 B VCR ...... 7 Basic Menu ...... 29 BALANCE ...... 23 CURRENT TIME SET ...... 25 SET UP ...... 26 Basic Menu E] ...... 29 D TIMER ...... 25 BASS ...... 23 DAYLIGHT SAVING ...... 25 VIDEO ...... 22 Battery installation ...... 13 DBS receiver operation ...... 32 BRIGHTNESS ...... 22 DISPLAY C CAPTION VISION ...... 16 CABLE ...... 26 Status ...... 16 Cable box ...... 6 XDS ...... 16 operation ...... 32 DVD operation ...... 31 36 M, N SWAP ...... 18, 19 SWAP button ...... 18, 19 MDP operation ...... 31 TV/VIDEO ...... 17, 19 SYSTI_M OFF button ...... 16 Menu selection ...... 20 Programming the remote ...... 30, 31 T, U Mode R TILT CORRECTION ...... 28 MOVIE ...... 22 Remote control ...... 13, 15 TIMER menu operations Q STANDARD ...... 22 FUNCTION buttons ...... 15 CURRENT TIME SET ...... 25 VW1D ...... 22 Illustration ...... inside front cover DAYLIGHT SAVING ...... 25 MONITOR OUT ...... 10 S ON/OFF TIMER ...... 25 Mono ...... 24 TREBLE ...... 23 MTS SAP ...... 24 Troubleshooting ...... 33, 34 MONO ...... 24 Safety ...... 3 TV (FUNCTION) button ...... 15 SAP ...... 24 Select buttons ...... 13 TV POWER button ...... 15 STEREO ...... 24 Adjustment bars ...... 13 W/VIDEO button ...... 16 MUTING button ...... 15 SET UP menu _ ...... 26 AUTO PROGRAM ...... 26 TV OUT ...... 10 O CABLE ...... 26 V, W, X, Y, Z On-Screen Help ...... 13 CHANNEL SKIP/ADD ...... 26 VCR ...... 7 ON/OFF TIMER ...... 25 CHANNEL CAPTION ...... 26 VCR manufacturer code numbers ...... 30 Operating video equipment ...... 30 CHANNEL BLOCK ...... 27 VCR operation ...... 30 P, Q FAVORITE CHANNEL ...... 28 VIDEO LABEL ...... 28 Picture-in-Picture (PIP) TILT CORRECTION ...... 28 VIDEO menu operations {_ Main picture ...... 17 Setting up TV ...... 14 BKIGHTNESS ...... 22 Window picture ...... 17 SHARPNESS ...... 22 COLOR ...... 22

PIP connections (single tuner) ...... 17 SLEEP button ...... 16 HUE ...... 22 PIP connections (dual tuner) ...... 19 S-Link Connections ...... 12 MODE ...... 22 PIP operations SPEAKER PICTURE ...... 22 AUDIO ...... 17, 19 ON ...... 24 SHARPNESS ...... 22 CH+/-...... 18, 19 OFF ...... 24 VOL +/-...... 14 FREEZE ...... 18, 19 Specifications ...... 34, 35 VTR ...... 30 PIP ...... 17, 19 Splitter ...... 7 XDS ...... 16 POSITION ...... 18, 19

37 Printed in U.S.A.