Trinitron Color TV

2-639-961-11 (1)

Trinitron Color TV

Operating Instructions GB • Before operating the unit, please read this manual thoroughly and retain it for future reference.

01GB01COV-SOEMOce.p651 11/7/05, 10:34 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 220 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. • To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid leaks from the batteries and touches your skin, immediately wash it away with water.

For your own safety, do not touch For children’s safety, do not leave To prevent fire or shock hazard, do any part of the TV, the power cord children alone with the TV. Do not not expose the TV to rain or and the antenna cable during allow children to climb onto it. moisture. lightning storms.

Do not place any objects on the TV. Do not operate the TV if any liquid Install the TV on a stable TV stand The apparatus shall not be or solid object falls into it. Have it and floor which can support the exposed to dripping or splashing checked immediately by qualified TV set weight. Ensure that the TV and that no objects filled with personnel only. stand surface is flat and its area is liquids, such as vases, shall be larger than the bottom area of the placed on the apparatus. TV.

Do not block the ventilation Your TV is recommended for Do not plug in too many openings of the TV. Do not install home use only. Do not use the TV appliances to the same power the TV in a confined space, such in any vehicle or where it may be socket. Do not damage the power as a bookcase or built-in cabinet. subject to excessive dust, heat, cord. moisture or vibrations.

Do not open the cabinet and the Clean the TV with a dry and soft Pull the power cord out by the rear cover of the TV as high cloth. Do not use benzine, thinner, plug. Do not pull the power cord voltages and other hazards are or any other chemicals to clean the itself. Even if your TV is turned present inside the TV. Refer TV. Do not attach anything (e.g., off, it is still connected to the AC servicing and disposal of the TV adhesive tape, cellophane tape, power source (mains) as long as to qualified personnel. glue) on the painted cabinet of the the power cord is plugged in. TV. Do not scratch the picture Unplug the TV before moving it tube. or if you are not going to use it for several days.

01GB02WAR-SOEMOce.p652 11/7/05, 10:36 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) Table of Contents

Installation Menu Adjustment Securing the TV ...... 4 Introducing the WEGA GATE Getting Started ...... 5 navigator ...... 18 Setting up your TV “Settings” Adjustment ...... 19 (“Initial Setup”) ...... 6 Changing the “Picture” setting ...... 21 Changing the “Sound” setting ...... 23 Overview of Controls Changing the “Wide Screen” setting ...... 25 TV front and rear panels ...... 8 Changing the “Channel Setup” Using the remote control and setting ...... 26 basic functions ...... 9 Changing the “Setup” setting ...... 28 GB

Advanced Operations Additional Information Selecting the picture and Connecting optional components ... 30 sound modes ...... 11 Troubleshooting ...... 33 Using the wide screen mode ...... 12 Specifications ...... Back cover Enjoying the WEGA Theatre Mode with center speaker ...... 14 Enjoying stereo or bilingual programs ...... 15 Viewing Teletext...... 16 Operating optional components ...... 17

01GB03TOC-SOEMOce.p653 11/7/05, 10:37 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) Installation

x Securing the TV

To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV.

20 mm 3.8 mm screws clamps band

Screw the band to the TV stand and to the provided hole at the rear of your TV.

(1) Put a cord or chain through the clamps. (2) Screw one clamp to a wall or pillar and the other clamp to the provided hole at the rear of your TV.

(1) Attach each end of a cord or chain to the provided holders at the rear of your TV. (2) Securely fix the attached cord or chain to a wall or pillar using an attachment which can support the TV set weight.

Note • Use only the supplied screws. Use of other screws may damage the TV.

4 Installation

01GB04INS-SOEMOce.p654 11/7/05, 10:40 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) x Getting Started

1Step 1

Insert the batteries (supplied) into the remote. b Note • Do not use old or different types of batteries together.

Installation

Step 2

Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. Tip • You can also connect your TV to other optional components (see page 30).

Step 3

Plug in the power cord, then press ! on the TV to b turn it on. Note • The 1 (standby) indicator flashes green for a few seconds when turning on the TV. This does not indicate a malfunction.

Step 4

Set up the TV by following the instructions of the “Initial Setup” menu (see page 6).

Select Confirm End

Installation 5

01GB04INS-SOEMOce.p655 11/7/05, 10:40 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) x Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Initial Setup” menu will appear. You may change the menu language, preset the TV channels automatically, sort or edit the channels and adjust the picture position using the buttons on the remote control or TV front panel.

Press V or v to select the desired menu 1 language, then press . The selected menu language appears.

Select Confirm End

Press V or v to select “Yes”, then press to 2 preset the channels automatically. The screen will indicate automatic presetting is in progress. Select Confirm End After all available channels have been tuned and stored, the “Program Sorting/Edit” Program: 01 TV System: Auto menu appears automatically on the screen. VHF Low To skip automatic channel presetting, select

“No”, then press . End

If the message “No channel found. Please connect cable/antenna” appears, check your TV connections, then press .

The “Program Sorting/Edit” menu enables 3 you to sort and edit the channels. a) If you wish to keep the channels in the current Program Sorting/Edit PROG Label Skip condition, press WEGA GATE to exit. 01 Off 02 Off b) Press V or v to select the program 03 Off 04 Off number with the channel you wish to Sorting: Edit: change. The selected channel will appear Select Confirm Exit on the screen.

c) If you wish to store the channels in a Program Sorting/Edit PROG Label Skip different order: 01 Off 02 Off 1) Press b to enter sorting mode. 03 01 Off 04 Off 2) Press V or v to select the new program Sorting mode number position for your selected Select Confirm Exit channel, then press B.

6 Installation

01GB04INS-SOEMOce.p656 11/7/05, 10:40 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) d) If you wish to edit the channels, press to change to edit mode. Press b until the mode that you wish to edit is highlighted: Label, Skip, (block symbol). Then press . 1) To label, press V or v to select the alphanumeric characters for the label. Then press . Select Confirm Exit

Installation 2) To skip the program number, press V or v to select “On”. Then press . You can skip this program number when using PROG +/-. Select Confirm Exit 3) To block unwanted program number, press V or v to select . Then press .

e) Repeat step b) to d) if you wish to change other channels. Select Confirm Exit Press WEGA GATE to go to the next menu.

Press B or b to adjust the bars on the top 4 and bottom of the menu if they are slanted, then press . Select Confirm End “Picture V-Position” menu appears.

If the upper and lower bars are not 5 equally positioned to the top and bottom of the screen, press V or v to

adjust them, then press . Select Confirm End If no adjustment is necessary, then press .

To prevent this “Initial Setup” menu from 6 appearing again when you turn on the TV by pressing !, press V or v to select “No”, then press .

To allow this menu to appear again, select Select Confirm “Yes”, then press .

Tip • You can immediately go to the end of the “Initial Setup” menu by pressing WEGA GATE.

Installation 7

01GB04INS-SOEMOce.p657 11/7/05, 10:40 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) Overview of Controls

x TV front and rear panels

TV rear panel qa

qg RLYCB CR

c Ð 134 120W MAX 8

AUTO PROG:Press [MENU] for 5sec

L(MONO) R SOUND MENU 4 MODE (AUTO PROG) PROG

qd qs

TV front panel 0 9 8 7 6 5 4 3 2 1

WEGA GATE

L(MONO) R 2 SOUND MODE PROG

Button/Terminal Function Page 1 ! Turn off or turn on the TV. 5 2 1 Standby indicator. 5 2 Wake Up indicator. 9 3 Remote control sensor. – 4 PROG +/– Select program number. – 5 2 +/– Adjust volume. – 6 t Select TV or video input. 30 WEGA GATE menu operations 4, 5 V,v,B,b Select and adjust items. 18 6 Confirm selected items. 18 7 WEGA GATE Display or cancel WEGA GATE menu. 18 8 SOUND MODE Select sound mode options with a 5-Band 11 Graphic Equalizer display. 9 t2 Video input terminal 2. 30 0 i Headphone jack. – qa Component video input terminal. 31 qs T Monitor output terminal. 31 qd t1, t3, t4 Video input terminal 1, 3, 4. 30 qf 8 Antenna input terminal. 30 qg Center speaker input terminal. 32

8 Overview of Controls

01GB04INS-SOEMOce.p658 11/7/05, 10:40 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) x Using the remote control and basic functions Button Description Page qf VIDEO 1 1 ?/1 Turn off temporarily or –

qg WEGA 2 turn on the TV. THEATRE 2 Overview of Contr qh 3 a Display the TV program. – 3 t Select TV or video input. 30

A/B 4 Stereo/bilingual operations PROG INDEX 4 A/B Select stereo/bilingual mode. 15 5 5 PROG INDEX Not function for your TV. – 6 WEGA GATE menu operations 7 6 V, v, B, b Select and adjust items. 18

ols WEGA GATE qj RETURN 8 7 Confirm selected items. 18 8 qk 9 WEGA GATE Display or cancel WEGA 18 ql GATE menu. 1 2 3 w; qj RETURN Return to the previous level. 18 4 wa 5 6 9 Change the picture size. 13 7 8 9 0 Jump to last program number 0 that has been watched for at – 0 least five seconds. PROG qa PROG +/– Select program number. – ws qa Timer operations qs OPTION Set TV to turn off automatically qs (Sleep according to the desired period – qd Timer) of time (max. of one hour and 30 min.). TV qd Set TV to turn on automatically (Wake Up according to the desired period Timer) of time (max. of 12 hours). – The indicator on TV lights up amber once you set the wake up timer. If no buttons or controls are pressed for more than one hour after the TV is turned on using the wake up timer, the TV automatically goes into standby mode. qf Mute the sound. – qg Display on-screen information. – qh WEGA THEATRE Select WEGA Theatre Mode. 14

continue Overview of Controls 9

01GB04INS-SOEMOce.p659 11/7/05, 10:40 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) continued

Button Description Page qk Select sound mode options with a 5-Band 11 Graphic Equalizer display. ql Select picture mode options. 11 w; Select surround mode options. 23 wa 0 – 9 Input numbers. For program numbers 10 and above, enter the second digit within two seconds. – ws 2 +/– Adjust volume. – PIP picture operations , , V,v,B,b Not function for your TV. – Teletext operations (green label) , , , , All buttons are used for Teletext operations. 16 , , , , (red, green, yellow, blue) Optional components operations VIDEO ?/1, OPTION, For details, see “Operating optional components”. 17 N, X, x, ., >, %, 2 +/–

WOW, TruSurround, SRS and symbol are trademarks of SRS Labs, Inc. WOW and TruSurround technologies are incorporated under license from SRS Labs, Inc. Licensed by BBE Sound, Inc. under USP4638258, 4482866. “BBE” and BBE symbol are trademarks of BBE Sound, Inc.

10 Overview of Controls

01GB04INS-SOEMOce.p6510 11/7/05, 10:41 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) Advanced Operations

x Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the “Custom” option.

VIDEO Selecting the picture mode

WEGA Press to select the desired picture mode. THEATRE Select To view

A/B “Vivid” contrast and sharp pictures. PROG INDEX “Standard” normal pictures. “Custom” the last adjusted picture setting from the “Picture Adjustment” WEGA RETURN GATE option in the menu (see page 22).

1 2 3 4 5 6 7 8 9 0

Selecting the sound mode Press (or SOUND MODE on the front panel) to select the desired sound mode. 5-Band Graphic Equalizer display will appear. Select To listen to

“Dynamic”Dynamic dynamic and clear sound that emphasizes both the low and high tones.

100 300 1k 3k 8k

“Standard”Standard sound that emphasizes voice and high tones.

100 300 1k 3k 8k

“Custom”Custom the last adjusted sound setting from the “Sound Adjustment” option in the menu (see page 24).

100 300 1k 3k 8k

Advanced Operations 11

01GB05AVD-SOEMOce.p6511 11/7/05, 10:43 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) x Using the wide screen mode The wide screen mode feature allows you to watch the picture filling the 16:9 screen of the TV. Watching the picture in wide screen mode automatically – Auto Wide The TV automatically selects optimum wide screen mode according to the signal input and displays the picture to fill the 16:9 screen. The examples in the table below show the settings preset at the factory; “Auto Wide” is set to “On” and “4:3 Default” is set to “Wide Zoom” in the “Wide Screen” menu (see page 25).

When receiving … Auto Wide The picture changes to functions to select … normal 4:3 aspect ratio Wide picture with Zoom* or without an ID-1 or WSS signal.

letter box picture with an Zoom ID-1 or WSS signal.

Black bands may appear on the top and bottom of the screen.

squeezed picture with an ID-1 or Full WSS signal.

* When a normal 4:3 picture is received, “Wide Zoom” mode is automatically selected with the factory setting. You can display picture as it is without enlarging it (“Normal” mode) if you set “4:3 Default” in the “Wide Screen” menu to “Normal” (see page 25). Note • The Auto Wide feature may not work correctly depending on the quality of signal. In this case, select the wide screen mode manually using the button (see page 13).

12 Advanced Operations

01GB05AVD-SOEMOce.p6512 11/7/05, 10:44 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) Watching the picture in wide screen mode manually Press repeatedly until the mode indication you want is displayed on the screen.

1 2 3 Wide Zoom V Center: 00 Normal 4 5 6 7 8 9 0 PROG Zoom V Center: 00 Full

OPTION

Notes • You can also select the wide screen mode manually using the menu (see page 25). • When the wide screen mode is selected by pressing the button on the remote or using the menu, the Auto Wide feature does not work temporarily. The Auto Wide feature functions again when: – you change a TV channel. – you change the video input. – the TV is turned off and on again. – the signal format is changed. • In “Wide Zoom” or “Zoom” mode, you can adjust the vertical position of the picture (V Center) by using remote control. While “V Center: 00” in “Wide Zoom” or “Zoom” mode is displayed for three seconds, press V or v to adjust the vertical position, then press .

Advanced Operations 13

01GB05AVD-SOEMOce.p6513 11/7/05, 10:44 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) x Enjoying the WEGA Theatre Mode with center speaker The WEGA Theatre Mode enables you to enjoy the best picture, sound and surround effect of a cinema from a DVD source. You can use your TV speaker as the center speaker of your audio system for optimum vocal enhancement and control its sound volume from the remote of the TV. Setting up WEGA Theatre Mode VIDEO 1. Connect the center speaker terminals of the amplifier WEGA THEATRE to the center speaker input terminal on the TV WEGA (see page 32). THEATRE A/B 2. Select the proper video input and center speaker mode from “WEGA Theatre Setup” menu and turn PROG INDEX on (main power) the connected equipment (see page 28). 3. See the table below. If the connected equipment is

WEGA RETURN GATE a Sony audio/video equipment, you can set up the remote to work with the connected equipment (see page 17). 1 2 3 To Press 4 5 6 7 8 9 switch to WEGA WEGA THEATRE. 0 Theatre Mode Be sure to aim the remote control at PROG the TV set and connected equipment 2 +/– for about one second after the button is pressed. The connected equipment OPTION turns on automatically from standby mode and will start playing (only for Sony audio/video equipment). TV The “Picture Mode” and “Sound Mode” will switch automatically to “Custom” and you can adjust the setting to your personal preference (see pages 22 and 24). adjust center 2 +/–. speaker volume

Notes • Be sure to place your TV and connected Sony equipment adjacent to each other so that you can control both the TV and the connected equipment by using the TV’s remote control at the same time (see page 17). • The WEGA Theatre and center speaker modes are automatically cancelled when you change the input mode or turn the TV off and on again. • When the TV is in the center speaker mode, you cannot change the surround sound and the “Intelligent Volume” mode. • Some Sony equipment might not respond properly when WEGA THEATRE button is pressed. In this case, use the equipment’s own remote control. • To use the TV’s speakers as the center speaker, you can also display “Center Speaker” from “Sound” menu and select “On” (see page 23). 14 Advanced Operations

01GB05AVD-SOEMOce.p6514 11/7/05, 10:44 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) x Enjoying stereo or bilingual programs You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button.

VIDEO When receiving a NICAM program

WEGA Broadcasting On-screen display (Selected sound) THEATRE

NICAM NICAM t Mono (Regular sound) A/B stereo (Stereo sound)

A/B PROG INDEX t

NICAM NICAM Main ttNICAM Sub Mono bilingual (Main sound) (Sub sound) (Regular sound)

WEGA t RETURN GATE NICAM NICAM Main t Mono monaural (Main sound) (Regular sound)

1 2 3 t 4 5 6 7 8 9 When receiving an A2 program 0 PROG Broadcasting On-screen display (Selected sound)

A2 Stereo t Mono stereo (Stereo sound) (Regular sound) OPTION t

TV A2 Main t Sub bilingual (Main sound) (Sub sound) t

Note • If the stereo sound is noisy when receiving a stereo program, select “Mono”. The sound becomes monaural but the noise is reduced.

Advanced Operations 15

01GB05AVD-SOEMOce.p6515 11/7/05, 10:44 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) x Viewing Teletext Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext.

VIDEO To Do this

WEGA THEATRE display a Teletext Press . Each time you press , the page on the screen changes as follows: t t A/B TV picture Teletext Teletext and TV TV.

PROG INDEX If there is no Teletext broadcast, “100” is displayed at the top left corner of the screen.

WEGA check the contents Press . RETURN GATE of a Teletext service An overview of the Teletext contents, (red, including page numbers, appears on the green, 1 2 3 screen. yellow, 4 6 blue) 5 select a Teletext page Press the number buttons to enter the 7 8 9 three-digit page number of the desired 0 Teletext page. If you make a mistake, , PROG reenter the correct page number. To access the next or previous page, press or .

OPTION hold (pause) a Press to display the symbol “ ” at Teletext display the top left corner of the screen. To TV resume normal Teletext viewing, press . reveal concealed Press . information (e.g., To conceal the information, press the an answer to a quiz) button again. enlarge the Teletext Press . Each time you press , the display Teletext display changes as follows: Enlarge upper half t Enlarge lower half t Normal size. stand by for a Teletext (1) Enter the Teletext page number that page while watching you want to refer to, then press . a TV program (2) When the page number is displayed, press to show the text. select a FASTEXT Press (red, green, yellow and blue) menu or the colored that corresponds to the desired menu or boxes page number. turn off Teletext Press a.

Note • The FASTEXT feature can be used only when the FASTEXT broadcast is available.

16 Advanced Operations

01GB05AVD-SOEMOce.p6516 11/7/05, 10:44 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) x Operating optional components You can use the supplied remote to operate Sony audio/video equipment.

Setting up the remote to work with other connected equipment

While keeping VIDEO ?/1 For example, to operate a pressed, press the corresponding Sony 8 mm VCR: number button for the desired VIDEO equipment (see the chart below). + 8

To control Hold down VIDEO ?/1 and press Audio System 1, 1x, 2 or 3 0, 1, 2, or 3 DVD 1, 2 or 3 4, 5 or 6 VTR1 (Beta), VTR2 (8 mm) or VTR3 (VHS) 7, 8 or 9

Operating audio/video equipment Press VIDEO ?/1 or while keeping OPTION pressed, press N, x, ., >, X, or 2 +/– (see the chart below).

To Press turn on/off VIDEO ?/1 play N while keeping OPTION pressed. stop x while keeping OPTION pressed. fast forward/ step forward or rewind/ > or . while keeping OPTION step backward pressed. pause X while keeping OPTION pressed. Press again to resume normal playback. mute the sound while keeping OPTION pressed. (Audio System 1, 1x, 2 or 3 only) adjust volume 2 +/– while keeping OPTION pressed. (Audio System 1, 1x, 2 or 3 only)

Notes • If the equipment does not have a certain function, the corresponding button on the remote will not operate. • Some equipment might not respond properly to buttons on TV’s remote. In this case, use the equipment’s own remote control.

Advanced Operations 17

01GB05AVD-SOEMOce.p6517 11/7/05, 10:44 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) Menu Adjustment

x Introducing the WEGA GATE navigator WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs and “Settings” menu.

WEGA GATE TV TV 01 External Inputs “TV” 02 Settings 03 watch the preset TV 04 channels (see page 6) 05 Select Confirm Select Confirm End

External Inputs 1 Video 1 “External Inputs” 2 Video 2 select the inputs for the 3 Video 3 connected equipment 4 Video 4 DVD (see page 30)

Select Confirm End

Picture Picture Mode: Vivid “Settings” Picture Adjustment change the settings Color Temperature: Cool of your TV 3D Intelligent Picture: On (see page 19)

Select Confirm End

How to use WEGA GATE

WEGA GATE TV TV 01 External Inputs 02 Settings 03 04 05 Select Confirm Select Confirm End

(1) Press WEGA GATE to display or cancel (3) Press V or v to select the desired item. the WEGA GATE menu.

TV WEGA GATE 01 TV 02 External Inputs 03 Settings 04 05 Select Confirm End Select Confirm (2) Press (or b) to confirm your selection (4) Press RETURN to move to the previous or go to the next level. level.

Tip • The WEGA GATE, and V,v,B,b buttons on the front panel can also be used for the operations above.

18 Menu Adjustment

01GB05AVD-SOEMOce.p6518 11/7/05, 10:44 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) x “Settings” Adjustment You are able to change the settings of your TV from “Settings” in WEGA GATE menu. Press WEGA GATE button to display WEGA GATE menu. Press V or v to select “Settings” and press . The following is an overview of the items that can be adjusted.

Picture “Picture” (see page 21) Picture Mode: Vivid Picture Adjustment “Picture Mode”: “Vivid” “Standard” “Custom” Color Temperature: Cool 3D Intelligent Picture: On “Picture Adjustment”: “Picture”, “Brightness”, “Color”, “Hue”, “Sharpness”, “Reset”

Select Confirm End “Color Temperature”: “Cool” “Neutral” “Warm” “3D Intelligent Picture”: “On” “Off”

Sound “Sound” (see page 23) Sound Mode: Dynamic Sound Adjustment “Sound Mode”: “Dynamic” “Standard” “Custom” Balance Intelligent Volume: Off “Sound Adjustment”: “Adjust”, “Reset” Surround: Off “Balance” Center Speaker: Off Select Confirm End “Intelligent Volume”: “On” “Off” “Surround”: “TruSurround” “WOW” “Simulated” “Off” “Center Speaker”: “On” “Off”

Wide Screen “Wide Screen” (see page 25) Wide Mode: Wide Zoom Auto Wide: On “Wide Mode”: “Wide Zoom” “Normal” “Full” “Zoom” 4:3 Default: Wide Zoom “Auto Wide”: “On” “Off” V Center: 00 V Size: 00 “4:3 Default”: “Wide Zoom” “Normal”

Select Confirm End “V Center” “V Size”

Channel Setup “Channel Setup” (see page 26) Auto Program Manual Program “Auto Program” Program Sorting/Edit “Manual Program” “Program”: “00” - “99”

Select Confirm End “TV System”: “B/G” “I” “D/K” “M” “VHF Low”/”VHF High”/”UHF” “Fine”: “Auto” “Manual” “Signal Booster”: “Auto” “Off” “Program Sorting/Edit”

continue Menu Adjustment 19

01GB05AVD-SOEMOce.p6519 11/7/05, 10:44 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) continued

Setup ”Setup” (see page 28) Language: English Picture Position “Language”: “English” “ ” (Chinese) WEGA Theatre Setup Video Label: “Picture Position”: “Picture Rotation”, “Picture V-Position” Color System: Auto “WEGA Theatre Setup”: “Direct Input”, “Speaker” Factory Settings Select Confirm End “Video Label”: “Video Input”, “Label” “Color System”: “Auto” “PAL” “SECAM” “NTSC3.58” “NTSC4.43” “Factory Settings”: “Yes” “No”

Note • When a feature is dimmed in the menu, it is not selectable.

20 Menu Adjustment

01GB05AVD-SOEMOce.p6520 11/7/05, 10:44 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) x Changing the “Picture” setting The “Picture” menu allows you to adjust the picture settings. 1 Press WEGA GATE and select “Settings”.

Make sure the “Picture” icon ( ) is Picture 2 Picture Mode: Vivid selected, then press . Picture Adjustment Color Temperature: Cool 3D Intelligent Picture: On

Select Confirm End 3 Press V or v to select the desired item (e.g., “Picture Mode”), then press . Select To “Picture Mode” choose either “Vivid”, “Standard” or “Custom”* (see page 11). “Color Temperature” adjust white color tint. Choose either “Cool” (blue tint), “Neutral” (neutral tint) or “Warm” (red tint). “3D Intelligent Picture” optimize picture quality. Automatically, the picture will become clearer and sharper if the signal is good and noise will be reduced if the signal is noisy. Press V or v to select “On”, then press . To cancel, select “Off”, then press .

* You can adjust the setting to your personal preference in the “Picture Adjustment” and “Color Temperature” options only when the “Custom” mode is selected (see page 22).

Note • For NTSC 3.58 color system, “3D Comb Filter : On” or “3D–NR : On” display will appear when “3D Intelligent Picture” changes from one mode to the other. For PAL color system, Digital Comb Filter and 3D-NR are also available.

continue Menu Adjustment 21

01GB05AVD-SOEMOce.p6521 11/7/05, 10:44 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) continued

Adjusting the “Picture Adjustment” items under “Custom” mode

Press V or v to select either “Picture” (contrast), “Brightness”, “Color”, 1 “Hue” (color tones) or “Sharpness”, then press . Selecting “Reset” will set your TV to the factory settings. 2 Press V,v,B or b to adjust the setting of your selected item, then press . 3 Repeat the above steps to adjust other items. The adjusted settings will be received when you select “Custom”.

Notes • “Hue” can be adjusted for the NTSC color system only. • Reducing “Sharpness” can also reduce picture noise.

22 Menu Adjustment

01GB05AVD-SOEMOce.p6522 11/7/05, 10:44 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) x Changing the “Sound” setting The “Sound” menu allows you to adjust the sound settings. 1 Press WEGA GATE and select “Settings”.

Press V or v to select the “Sound” Sound 2 Sound Mode: Dynamic icon ( ), then press . Sound Adjustment Balance Intelligent Volume: Off Surround: Off Center Speaker: Off Select Confirm End 3 Press V or v to select the desired item (e.g., “Sound Mode”), then press . Select To “Sound Mode” choose either “Dynamic”, “Standard” or “Custom”* (see page 11). “Balance” Press v or B to emphasize the left speaker. Press V or b to emphasize the right speaker. “Intelligent Volume” adjust the volume of all program numbers and video inputs automatically. Press V or v to select “On”, then press . To cancel, select “Off”, then press .

“Surround” choose either “TruSurround” (surround sound that spreads out to the rear of a room), “WOW”** (full, deep bass sound), “Simulated” (stereo-like monaural sound) or “Off”. “Center Speaker” use your TV speaker to optimise vocal enhancement. Press V or v to select “On”, then press . To cancel, select “Off”, then press .

* You can adjust the setting to your personal preference in the “Sound Adjustment” option only when the “Custom” mode is selected (see page 24). ** BBE High Definition Sound is fully activated maximizing the sound effect in the WOW mode.

Note • “Intelligent Volume” is not selectable when “TruSurround” is selected.

continue Menu Adjustment 23

01GB06ADJ-SOEMOce.p6523 11/7/05, 11:17 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) continued

Adjusting the “Sound Adjustment” items under “Custom” mode The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings of “Custom” mode in the menu.

Make sure that “Adjust” is selected, Sound Adjustment 1 then press . Adjust Reset Selecting “Reset” will set your TV to the factory settings. 100 300 1k 3k 8k Select Confirm End

Press B or b to select the desired sound frequency, then press V or v to 2 adjust the setting and press . The adjusted settings will be received when you select “Custom”.

Notes • Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency will affect lower pitched sound. • You may display the settings directly using the SOUND MODE button on the TV front panel (see page 8) or button on the remote control (see page 10).

24 Menu Adjustment

01GB06ADJ-SOEMOce.p6524 11/7/05, 11:17 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) x Changing the “Wide Screen” setting The “Wide Screen” menu allows you to watch the picture filling the 16:9 screen of the TV. 1 Press WEGA GATE and select “Settings”.

Press V or v to select the “Wide Screen” Wide Screen 2 Wide Mode: Wide Zoom icon ( ), then press . Auto Wide: On 4:3 Default: Wide Zoom V Center: 00 V Size: 00

Select Confirm End 3 Press V or v to select the desired item (e.g., “Wide Mode”), then press . Select To “Wide Mode” select the desired wide screen mode to fit the 16:9 screen. Press V or v to select “Wide Zoom”, “Normal”, “Full” or “Zoom”, then press .

“Auto Wide” automatically display the picture in optimum wide screen mode. Press V or v to select “On”, then press . Select “Off” if you want to display any picture in currently selected wide screen mode. “4:3 Default” display a 4:3 picture in “Wide Zoom” or “Normal” mode. Press V or v to select the “Wide Zoom” or “Normal”, then press .

“V Center” adjust the vertical position of the picture in “Wide Zoom” or “Zoom” mode. Press V or v to move the picture, then press .

“V Size” adjust the vertical size of the picture in “Wide Zoom” or “Zoom” mode. Press V or v to adjust the vertical size, then press .

Tips • You can also change to wide-mode picture size by pressing the button on the remote control (see page 13). • You can also adjust “V Center” by using remote control (see page 13).

Note • “4:3 Default” does not function when “Auto Wide” is set to “Off”.

Menu Adjustment 25

01GB06ADJ-SOEMOce.p6525 11/7/05, 11:17 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) x Changing the “Channel Setup” setting The “Channel Setup” menu allows you to preset channels automatically, manually preset channels and sort or edit the channels. 1 Press WEGA GATE and select “Settings”. Press V or v to select the “Channel Setup” 2 Channel Setup icon ( ), then press . Auto Program Manual Program Program Sorting/Edit

Select Confirm End 3 Press V or v to select the desired item (e.g., “Auto Program”), then press . Select To “Auto Program” preset channels automatically. “Manual Program” manually preset desired channels and channels that cannot be preset automatically (see Presetting channels manually in page 27). “Program Sorting/Edit” change the order in which the channels appear on the screen, label the program number, skip the program number and block unwanted programs. (see step 3 of the section “Initial Setup” in page 6).

Notes • If you preset a blocked program number, that program number will be unblocked automatically. • If you sort a blocked program, that program will remain blocked.

26 Menu Adjustment

01GB06ADJ-SOEMOce.p6526 11/7/05, 11:17 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) Presetting channels manually 1 After selecting “Manual Program”, select the program number to which you want to preset a channel. Manual Program Program: 01 (1) Make sure “Program” is selected, then press . TV System: B/G VHF Low (2) Press V or v until the program number you want Fine: Auto Signal Booster: Auto to preset appears on the menu, then press . Select Confirm End 2 Select the desired channel. (1) Make sure either “VHF Low”, “VHF High” or “UHF” is selected, then press . (2) Press V or v until the desired channel’s broadcast appears on the TV screen, then press .

If the sound of the desired channel is abnormal, select the appropriate TV 3 system. (1) Press V or v to select “TV System”, then press . (2) Press V or v until the sound becomes normal, then press .

If you are not satisfied with the picture and sound quality, you may be able 4 to improve them by using the “Fine” tuning feature. (1) Press V or v to select “Fine”, then press . (2) Press V or v to select “Manual”, then press . (3) Press V,v,B or b until the picture and sound quality are optimal, then press . The + or – icon on the menu flashes while tuning.

If the TV signal is too strong (picture distorted; picture with lines; signal 5 interference) or weak (snowy picture), you may be able to improve the picture quality by setting the “Signal Booster” feature. (1) Press V or v to select “Signal Booster”, then press . (2) Press V or v to select “Off” (for picture distorted; picture with lines; signal interference) or “Auto” (for snowy picture), then press .

Menu Adjustment 27

01GB06ADJ-SOEMOce.p6527 11/7/05, 11:17 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) x Changing the “Setup” setting The “Setup” menu allows you to change the menu language, adjust the picture position, setup WEGA Theatre Mode, label the connected equipment, select the color system and reset your TV to factory settings. 1 Press WEGA GATE and select “Settings”.

Press V or v to select the “Setup” icon ( ), Setup 2 Language: English then press . Picture Position WEGA Theatre Setup Video Label: Color System: Auto Factory Settings Select Confirm End 3 Press V or v to select the desired item (e.g., “Language”), then press . Select To “Language” change the menu language. Press V or v to select either “English” or “ ” (Chinese), then press .

“Picture Position” adjust the picture position when it is not aligned with the TV screen. Press V or v to select “Picture Rotation” or “Picture V-Position”, then press . Press V,v,B or b to adjust the picture position, then press .

“WEGA Theatre Setup” setup WEGA Theatre Mode for best picture, sound and surround effect enjoyment of a cinema (see page 14). Press V or v to select “Direct Input”, then press . Select either “Video 1”, “Video 2”, “Video 3”, “Video 4” or “DVD” for the connected equipment that you want to view with WEGA Theatre, then press . Select “Speaker” and press . Normally select “MAIN”. When you want to use the TV’s speakers as the center speaker, press V or v to select “CENTER IN”, then press . “Video Label” label the connected equipment. (1) Select “Video Input” and press . Press V or v to select the input you want to label, then press . (2) Select “Label” and press , then press V or v to select the label options: “Video 1/”Video 2”/”Video 3”/”Video 4”/ “DVD”, “VCR”, “SAT”, “Game” or “Edit”*. * You may edit the video label to your favorite name. Press V or v to select alphanumeric characters for the label, then press .

28 Menu Adjustment

01GB06ADJ-SOEMOce.p6528 11/7/05, 11:17 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) Select To “Color System” select the color system. Press V or v to select either “Auto”, “PAL”, “SECAM”, “NTSC3.58” or “NTSC4.43”, then press . Normally, set this to “Auto”. “Factory Settings” reset your TV to factory settings. Press and press V or v to select “Yes”, then press .

To cancel, select “No”, then press .

Menu Adjustment 29

01GB06ADJ-SOEMOce.p6529 11/7/05, 11:17 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) Additional Information

x Connecting optional components Connecting to the video input terminal ( t )

TV front panel S Video cable (not supplied)

L(MONO) R Audio/Video Camcorder 2 cable (not supplied)

TV rear panel

Antenna cable (not supplied) RLYCB CR

c Ð 134 120W MAX 8

Audio/Video VCR cable (not supplied)

S Video cable DVD Player (not supplied)

Notes • If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the program number 0 on the TV (see page 27). • When both (S video) and (video) for t1 are connected at the same time, (S video) is automatically selected. To view (video), disconnect the S video cable.

30 Additional Information

01GB07ADJ-SOEMOce.p6530 11/7/05, 11:20 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) Connecting to the monitor output terminal ( T )

TV rear panel

RLYCB CR Audio/Video c Ð 134 120W MAX 8 cable (not supplied) Audio system

VCR

Connecting to the component video input terminal ( )

TV rear panel Component video cable (not supplied)

RLYCB CR DVD player c Ð 134 120W MAX 8

Audio cable (not supplied)

Notes • If your DVD player can output interlace and progressive mode signals, select the interlace output when connecting to (component video input) on your TV. Your TV can receive either 525i/60Hz or 625i/50Hz interlace signals. • The component video terminals on your DVD player are sometimes labeled Y/CB/CR, Y/PB/ PR, Y/Cb/Cr or Y/B-Y/R-Y. • If you select “DVD” on your TV screen, the signal from the T (monitor output) terminals will not be output properly. This does not indicate a malfunction.

continue Additional Information 31

01GB07ADJ-SOEMOce.p6531 11/7/05, 11:20 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) continued

Connecting an amplifier to the center speaker input terminal ( )

If you use an amplifier with a Dolby* surround decoder instead of the TV’s audio system, you can use the TV’s speakers as the center speaker for your audio system. Using the speaker cords supplied with the amplifier, connect the center speaker terminals of the amplifier to the (center speaker input) terminals on the TV.

TV rear panel Component DVD player video cable (not supplied)

RLYCB CR

c 134 120W MAX 8 Optical digital Audio cable cable (not supplied) (not supplied)

C Ð 120W MAX 8

Amplifier

Front Front speaker (L) speaker (R) Rear Rear speaker (L) speaker (R)

Woofer

Note • If you use the TV’s speakers as the center speaker and nothing is connected to the center speaker input terminals on the rear of TV or the sound source emitted from the amplifier does not contain the center speaker channel, no sound will be heard from the TV’s speaker.

* “Dolby” is a trademark of Dolby Laboratories.

32 Additional Information

01GB07ADJ-SOEMOce.p6532 11/7/05, 11:20 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) x Troubleshooting If you find any problem while viewing your TV, you can either use the “Factory Settings” function or check the Troubleshooting guide below. If the problem persists, contact your Sony dealer. “Factory Settings” function Press the WEGA GATE button. Choose “Settings” and go to “Setup” ( ) menu. From “Setup” menu, select “Factory Settings”. Then select “Yes” and press . Your TV will go blank for a few seconds, then the “Initial Setup” menu will appear. Your TV will be set to factory settings, but certain problems may be solved.

Symptom Solutions Snowy picture, • Check the antenna cable and connection on the TV, VCR and at the wall noisy sound (see page 30). • Check the antenna setup. Contact a Sony dealer for advice. • Display the “Channel Setup” menu and select “Manual Program” to preset the channel again (see page 27). • Display the “Channel Setup” menu and set the “Signal Booster” to “Auto” from “Manual Program” (see page 27). • Try using an external booster. Distorted picture, • Turn off or disconnect the external booster if it is in use. noisy sound • Display the “Channel Setup” menu and set the “Signal Booster” to “Off” from “Manual Program”(see page 27). Good picture, • Display the “Channel Setup” menu and select the appropriate noisy sound “TV System” from “Manual Program” (see page 27). No picture, • Check the power cord, antenna and VCR connections (see page 30). no sound • Press ?/1 (power) to turn on the TV (see page 9). • Press ! (main power) on the TV to turn off the TV for about five seconds, then turn it on again (see page 8). Good picture, • Press 2 + to increase the volume level (see page 10). no sound • Press to cancel the muting (see page 9). • Display the “Sound” menu and select the appropriate setting for “Center Speaker” (see page 23).

Dotted lines or • Do not use a hair dryer or other equipment near the TV. stripes • Check the antenna setup. Contact a Sony dealer for advice. Double images or • Use the fine tuning (“Fine”) function (see page 27). “ghosts” • Check the antenna setup. Contact a Sony dealer for advice. • Turn off or disconnect the external booster if it is in use. No color • Display the “Picture” menu and select “Custom” from “Picture Mode”, then adjust the “Color” level from “Picture Adjustment” (see page 22). • Display the “Setup” menu and check the “Color System” setting (usually set this to “Auto”) (see page 29). • Check the antenna setup. Contact a Sony dealer for advice.

continue Additional Information 33

01GB08ADV-SOEMOce.p6533 11/7/05, 11:23 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) continued

Symptom Solutions Picture slant • Keep external speakers or other electrical equipment away from the TV. • Display the “Picture Position” under “Setup” menu, then adjust “Picture Rotation” and “Picture V-Position” so that the picture is aligned to the TV screen (see page 28).

Abnormal color • Keep external speakers or other equipment away from the TV. Do not patches move the TV while the TV is turned on. Press ! (main power) on the TV to turn off the TV for about 15 minutes, then turn it on again to demagnetize the TV.

TV cannot receive • Check the antenna cable and connection on the TV, VCR and at the wall stereo broadcast (see page 30). sound. • Check the antenna setup. Contact a Sony dealer for advice. or

Stereo broadcast sound switches on and off or is distorted. Teletext display is • Check the antenna cable and connection on the TV, VCR and at the wall incomplete (see page 30). (snowy picture or • Check the antenna setup. Contact a Sony dealer for advice. double images). • Display the “Channel Setup” menu and set the “Signal Booster” to “Auto” from “Manual Program” (see page 27). • Use the fine tuning (“Fine”) function (see page 27).

The wide screen • During a transition between two programs, the TV detects the optimum wide mode changes screen mode. During this period, an irregular wide screen mode may appear. spontaneously when “Auto Wide” • The wide screen mode is switched automatically according to the received is “On”. signal with an ID-1 or WSS signal. • The Auto Wide feature stops working temporarily when you have pressed , and functions again when the signal format changes. To fix in the manually selected wide screen mode, set “Auto Wide” to “Off” in the “Wide Screen” menu (see page 25).

The 1 (standby) • Count the number of times the 1 (standby) indicator flashes. indicator on your Press ! (main power) to turn off your TV. Contact your nearest Sony TV flashes red service center. several times after every three seconds.

34 Additional Information

01GB08ADV-SOEMOce.p6534 11/7/05, 11:23 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) Symptom Solutions The TV screen • The “Signal Booster” is functioning to detect a weak signal. This does not sometimes goes indicate a malfunction. blank for slightly longer than usual during channel change.

TV cabinet creaks. • Changes in room temperature sometimes make the TV cabinet expand or contract, causing a noise. This does not indicate a malfunction.

A small “boom” • The TV’s demagnetizing function is working. This does not indicate a sound is heard malfunction. when the TV is turned on.

Additional Information 35

01GB08ADV-SOEMOce.p6535 11/7/05, 11:23 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1) x Specifications

KV-SA322M31 KV-SA282M31 Note Power requirements 220-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system B/G, I, D/K, M Color system PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43 Stereo/Bilingual system NICAM Stereo/Bilingual B/G, I, D/K; A2 Stereo/Bilingual B/G Teletext language English, French Channel coverage B/G VHF : E2 to E12 /UHF : E21 to E69 / CATV : S01 to S03, S1 to S41 VHF : 0 to 12A, 5A, 19A /UHF : 28 to 69 / Australia only CATV : S01 to S03, S1 to S41 VHF : 1 to 11 /UHF : 21 to 69 / New Zealand only CATV : S01 to S03, S1 to S41 I UHF : B21 to B68 /CATV : S01 to S03, S1 to S41 D/K VHF : C1 to C12, R1 to R12 / UHF : C13 to C57, R21 to R60 / CATV : S01 to S03, S1 to S41, Z1 to Z39 M VHF : A2 to A13 /UHF : A14 to A79 / CATV : A-8 to A-2, A to W+4, W+6 to W+84 8 (Antenna) 75-ohm external terminal Audio output (Speaker) 10 W + 10 W Number of terminal (Video) Input: 4 Output: 1 Phono jacks; 1 Vp-p, 75 ohms (Audio) Input: 5 Output: 1 Phono jacks; 500 mVrms (S Video) Input: 2 Y: 1 Vp-p, 75 ohms, unbalanced, sync negative C: 0.286 Vp-p, 75 ohms (Component Input: 1 Phono jacks; Video) Y: 1 Vp-p, 75 ohms, sync negative CB: 0.7 Vp-p, 75 ohms CR: 0.7 Vp-p, 75 ohms (Center Input: 1 120 W max., 8 ohms Speaker) i (Headphone) Output: 1 Stereo minijack Picture tube 32 in. 28 in. Tube size (cm) 81 71 Measured diagonally Screen size (cm) 76 66 Measured diagonally Dimensions (w/h/d, mm) 895 × 575 × 596 786 × 504 × 544 Mass (kg) 62 45

Design and specifications are subject to change without notice.

36 Additional Information

01GB08ADV-SOEMOce.p6536 11/7/05, 11:23 am Black Sony KV-SA322M31 Group R1 (GB)_2-639-961-11 (1)