Rooftop Products ROOF HATCH, SMOKE VENT + FALL PROTECTION 07 7200 | PRODUCT CATALOG FALL PROTECTION 05 5213 / 07 7200

ACCESS DOORS 08 3100

FLOOR DOORS 08 3483

STAIR TREADS + NOSINGS 05 5000

ENTRANCE MATS + GRILLES 12 4813 / 12 4816

WALL + DOOR PROTECTION 10 2600

ROOF HATCHES + SMOKE VENTS 07 7200 Rooftop Products ROOF HATCHES 5-10 Personnel™ II 4 Personnel™ 5 Quality + Safety ThermalMAX™ 6 SunLit™ 7 Security 8 Hurricane Hatch™ 9 above all Equipment Hatch 10

ROOF HATCH FALL PROTECTION 11-12 Safety Railing 11 Ladder Safety Post 12 Grab Bar 12

SMOKE VENTS 13-18 SafeMAX™ 13-14 LightMAX™ eco 15 LightMAX™ 16-17 AcousticMAX™ 18

SMOKE VENT FALL PROTECTION 19-20 Safety Railing 19 Burglar Bars 20 Screen 20

GUARDRAIL FALL PROTECTION 21-22 Weighted Base 21 Permanent 22

EXTERIOR ACCESS DOORS 23 Coastal Zone Exterior 23 Exterior 23

Configurable Options Access 24 Lock 24 Operation 24 Curb 25 ROOF HATCHES + SMOKE VENTS Dome 25 Multiwall 25 Powder Coat 26 Anodize 27 Kynar 27 Personnel™ II ROOF HATCH

The Personnel II Roof Hatch is designed with OSHA life safety in mind and provides easy access to roof areas. Simple to install and operate, this roof hatch is OSHA Compliant, stays cooler and conserves energy.

FEATURES

GAS SPRING OPERATION Designed for smooth one-handed operation that complies with OSHA safety standards, this roof hatch is easy to open and close.

CLEAR LABELING Color coordinated labels clearly identify safety yellow pull down handle and red hold open arm release.

RAILING-READY Safety railings install quick and easy with predrilled counterflash, designed to meet the 42" height requirement per OSHA and IBC.

DETAILS FINISHES MATERIAL • Aluminum: 11 gauge, mill • Steel: Galvanneal 14 gauge, red oxide or high reflectance white powder coat COVER Formed metal cover with liner, stiffened to withstand a live Mill 2B Matte Red Oxide High Reflectance White load of 40psf with a max deflection of 1/150 of the span Aluminum Stainless Steel Powder Coat Powder Coat CURB Single wall curb with EZ tab counterflash and mounting flange INSULATION 1 inch polystyrene in cover, 1 inch polyiso R-6 in curb or optional 2 inch polyiso in cover and curb; R-12 (specify -IRR) GASKET Extruded EPDM adhesive backed gasket seal, continuous around curb and cover SPRING Gas spring with damper for smooth, controlled lift assistance HINGE Heavy-duty pintle hinge with stainless steel hinge pin HOLD OPEN ARM Zinc plated steel automatic hold open arm with red vinyl grip handle locks cover in open position LATCH Zinc plated steel slam latch with exterior and interior turn handle and padlock hasps; 20psf wind uplift for lengths ≤ 60 inches. 79° PULL HANDLE Interior safety pull down handle, yellow powder coat

STANDARD MODELS 3-3/8" 12" RED WHITE ALUMINUM SIZE (IN.) ACCESS BG3630 BW3630 BA3630 36 x 30 Ladder BG3636 BW3636 BA3636 36 x 36 Ladder BG4848 BW4848 BA4848 48 x 48 Ladder 3-1/2" Width BG3054 BW3054 BA3054 30 x 54 Ship Stair

Additional sizes and options available, call for more information.

4 Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com Personnel™ ROOF HATCH

Babcock-Davis’ Personnel Roof Hatch is easily customizable and provides safe access to roof areas on your building. Sized for ladder, ship stair, and service stair access with optional safety railings, grab bars and a variety of materials and finishes.

FEATURES

POWDER COAT FINISH The standard (BRHPG) red oxide powder coat finish provides outstanding corrosion resistance, superior gloss and color retention.

INSULATION OPTIONS Available with two inches of polyiso insulation for a thermally efficient design. Specify the Energy Efficient Roof Hatch with a -IRR.

DETAILS FINISHES MATERIAL OPTIONS • Aluminum: 11 gauge, mill finish • Galvanneal Steel: 14 gauge, red oxide or high reflectance white powder coat • Stainless Steel: Type 304, 14 gauge, 2B matte finish Mill 2B Matte Red Oxide High Reflectance White COVER Formed metal cover with liner, stiffened to withstan a live load of Aluminum Stainless Steel Powder Coat Powder Coat 40psf with a max deflection of 1/150 the span CURB Single wall curb with EZ tab counterflash and mounting flange INSULATION 1 inch polystyrene in cover, 1 inch polyiso around curb or optional 2 inch Polyiso in cover and curb; R-12, specify -IRR GASKET Extruded EPDM adhesive backed gasket seal continuous around cover 78° SPRING/HINGE ASSEMBLY Zinc plated steel tamper-proof hinges contained within spring assembly, includes steel compression springs HOLD OPEN ARM Zinc plated steel automatic hold open arm with red vinyl grip handle locks cover in open position LATCH Zinc plated steel latch with exterior and interior turn handles and padlock hasps; 90psf wind uplift for lengths >60 inch 12" 7"

STANDARD MODELS 3-1/2" Width

GALVANNEAL STEEL GALVANNEAL STEEL ALUMINUM SIZE (IN.) ACCESS RED WHITE BRHPG30X72S1T BRHPW30X72S1T BRHPA30X72S1T 30 x 72 Ship Stair or Alternating Tread BRHPG30X77S1T BRHPW30X77S1T BRHPA30X77S1T 30 x 77 Ship Stair or Alternating Tread BRHPG30X96S1T BRHPW30X96S1T BRHPA30X96S1T 30 x 96 Service Stair BRHPG36X96S1T BRHPW36X96S1T BRHPA36X96S1T 36 x 96 Service Stair Additional sizes and options available, call for more information.

Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com Rooftop Products | ROOF HATCHES 5 ThermalMAX™ ROOF HATCH

The ThermalMAX Roof Hatch sets the new standard for thermally efficient roof hatches. Designed with a thermal break to keep cool-cool and hot-hot, this hatch boasts an R-20 insulation rating making it today’s most energy efficient hatch.

FEATURES

THERMALLY BROKEN Designed with a thermal break to stop the transfer of heat and cold.

IECC COMPLIANCE Code C402 for commercial building envelopes requires ≥R-5 in skylight curbs, a gasket weather seal to minimize air leakage and a solar reflectance index ≥82 in climate zones 1, 2, 3. 0+ -2 R I N

S

ENHANCED INSULATION Three inch foil faced polyiso U

L

A

insulation provides a thermally efficient design to help T

I

O

G

N

N I

R T maintain building envelope integrity; R-20. A

DETAILS FINISHES MATERIAL 11 gauge Aluminum FINISH Mill or powder coat COVER Formed metal cover withstands a live load of 40psf with a max deflection of 1/150 the span Mill High Reflectance White CURB Single wall curb with railing ready EZ tab counterflash and Aluminum Powder Coat mounting flange INSULATION 3 inch single layer foil faced polyiso in curb and cover; R-20.3 GASKET Extruded EPDM adhesive backed acoustic gasket seal, continuous around curb and cover to ensure a continuous seal SPRING Gas spring with integrated damper for smooth, controlled lift assistance HINGE Heavy-duty pintle hinge with stainless steel hinge pin HOLD OPEN ARM Zinc plated steel automatic hold open arm with red vinyl grip handle locks cover in open position LATCH Zinc plated steel spring-type slam latch with inside and outside operating turn handles and padlock hasp provisions; 20psf wind uplift PULL HANDLE Interior safety pull down handle, yellow powder coat, units larger than 60” utilize a two-point latch with handles 12" 9" STANDARD MODELS ALUMINUM SIZE (IN.) DOOR CURB ACCESS BRHTA36X30S1T 36 x 30 Single Single Wall Ladder 5-15/16" Width BRHTA36X36S1T 36 x 36 Single Single Wall Ladder BRHTA48X48S1T 48 x 48 Single Single Wall Ladder BRHTA30X54S1T 30 x 54 Single Single Wall Ship Stair or Alternating Tread BRHTA30X96S1T 30 x 96 Single Single Wall Service Stair Additional sizes and options available, call for more information.

6 Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com SunLit™ ROOF HATCH

Providing natural daylighting, the SunLit Roof Hatch is engineered with a translucent dome cover that is ideal for use in commercial buildings, retail, schools and more.

FEATURES

POLYCARBONATE DOME Add the traditional look of a domed skylight with 1/8 inch thick UV coated polycarbonate available in clear, white or bronze colors.

OPTIONAL DOUBLE DOME Increase impact and thermal resistance with double glazed polycarbonate domes.

OPTIONAL INSULATION Add additional thermal performance with fully insulated curbs including 2 inch polyiso insulation; specify -IRR.

DETAILS FINISHES COVER Formed aluminum, 11 gauge, mill finish, metal cover with 1/8 inch clear polycarbonate, UV coated dome CURB Single wall curb with EZ tab counterflash and mounting flange • Aluminum: 11 gauge, mill finish Mill Red Oxide • Steel: 14 gauge galvanneal, red oxide powder coat Aluminum Powder Coat INSULATION 1 inch fiberglass in cover, 1 inch polyiso around curb GASKET Extruded EPDM adhesive backed gasket seal continuous around cover SPRING/HINGE ASSEMBLY Zinc plated steel tamper-proof hinges contained within spring assembly, includes steel compression springs HOLD OPEN ARM Zinc plated steel automatic hold open arm with red vinyl grip handle locks cover in open position Zinc plated steel latch: 12" LATCH 7" • 20psf wind uplift for lengths ≤60 inch with slam latch • 90psf wind uplift for lengths >60 inches with 2-point rotary latch

STANDARD MODELS 3-1/2" Width

ALUMINUM STEEL + ALUMINUM SIZE (IN.) ACCESS DOOR CURB BRHLA36X30S1P BRHLB36X30S1P 36 x 30 Ladder Single Single Wall BRHLA36X36S1P BRHLB36X36S1P 36 x 36 Ladder Single Single Wall

Additional sizes and options available, call for more information.

Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com Rooftop Products | ROOF HATCHES 7 Security ROOF HATCH

Designed for applications with heightened security, Babcock-Davis’ Security Roof Hatch is constructed of heavy-duty materials and the option for security grade locks. Ideal for prisons, banks, water treatment facilities and other high security buildings.

FEATURES

SECURITY GRADE MATERIAL Deter forced entry with extra heavy-duty top security grade roof hatches. Constructed of 3/16 inch steel or 1/4 inch aluminum.

OPTIONAL LOCKS Add essential security upgrades to your rooftop access with detention or mortise locks.

OPTIONAL VIEWPORT Gain visibility with the optional bulletproof viewport on roof hatch cover. Ideal for use in prisons and wastewater treatment facilities.

DETAILS FINISHES MATERIAL • Aluminum: 1/4 inch, mill finish • Steel: 3/16 inch, red oxide powder coat COVER Formed metal cover with liner, stiffened to withstand a live load of 40psf with a max deflection of 1/150 the span Mill Red Oxide Aluminum Powder Coat CURB Single wall curb with EZ tab counterflash and mounting flange INSULATION 1 inch polystyrene in cover, 1 inch polyiso around curb GASKET Extruded EPDM adhesive backed gasket seal, continuous around cover SPRING/HINGE ASSEMBLY Zinc plated steel tamper-proof hinges contained within spring assembly, includes steel compression springs 12" HOLD OPEN ARM Zinc plated steel automatic hold open arm with 7" red vinyl grip handle locks cover in open position LATCH Zinc plated steel latch with exterior and interior turn handles and padlock hasp 3-1/2" Width

STANDARD MODELS

GALVANIZED STEEL ALUMINUM STEEL + ALUMINUM SIZE (IN.) ACCESS DOOR CURB BRHSG36X30S1T BRHSA36X30S1T BRHSB36X30S1T 36 x 30 Ladder Single Single Wall BRHSG36X36S1T BRHSA36X36S1T BRHSB36X36S1T 36 x 36 Ladder Single Single Wall BRHSG30X54S1T BRHSA30X54S1T BRHSB30X54S1T 30 x 54 Ship Stair Single Single Wall Additional sizes and options available, call for more information.

8 Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com Hurricane Hatch™ ROOF HATCH

Built to withstand nature’s toughest storms, Babcock- Davis’ Hurricane Hatch™ is ideal for regions extreme wind conditions. This hatch was tested for wind-uplift, forced entry and air infiltration.

FEATURES

INDUSTRY’S BEST Tested for small and large missle impact - Class IV (TAS 201-94), Air Pressure & Water Penetration (TAS 202-94), and Cyclic Wind Pressure Loading (TAS 203-94).

NEW LARGER SIZES Miami-Dade Approved configurable sizes available up to a maximum opening of 20 ft2 area; FL industry’s largest 30” x 96”. MIAMI DADE COUNTY Approved APPROVED

DETAILS MATERIAL 2-POINT LATCH • Aluminum 11 gauge, mill finish SPRING / HINGE ASSEMBLY Zinc plated steel tamper-proof hinges • Steel 14 gauge galvanneal, red oxide powder coat contained within spring assembly, includes steel compression springs COVER Formed metal cover with liner, stiffened to withstand a SINGLE POINT LATCH live load of 40psf with a max deflection of 1/150 of the span SPRING Gas spring with damper for smooth, controlled lift CURB Single wall curb with EZ tab counterflash and mounting flange assistance INSULATION 1 inch polyiso R-6 in curb, 1 inch polystyrene in HINGE Heavy-duty pintle hinge with stainless steel hinge pin cover PULL HANDLE Interior safety pull down handle, yellow powder GASKET Extruded EPDM adhesive backed gasket seal continuous coat around cover HOLD OPEN ARM Zinc plated steel automatic hold open arm locks FINISHES cover in open position LATCH Zinc plated steel latch with exterior and interior turn handles and padlock hasps. CERTIFICATION Florida Product Approvedand Miami-Dade County Mill Red Oxide High Reflectance White Powder Coat Powder Coat -FP44 STANDARDS SIZES

GALVANIZED STEEL ALUMINUM SIZE ACCESS DOOR CURB LATCH (IN.) 79° BRHHG36X30S1T BRHHA36X30S1T 36 x 30 Ladder Single Single Wall Single Point BRHHG36X36SIT BRHHA36X36SIT 36 x 36 Ladder Single Single Wall Single Point BRHHG48X48SIT BRHHA48X48SIT 48 x 48 Ladder Single Single Wall Single Point BRHHG30X54S1T BRHHA30X54S1T 30 x 54 Ship Stair Single Single Wall Single Point 12" BRHHG30X72SIT BRHHA30X72SIT 30 x 72 Ship Stair Single Single Wall 2-Point 8-5/8" BRHHG36X72SIT BRHHA36X72SIT 36 x 72 Ship Stair Single Single Wall 2-Point BRHHG30X96SIT BRHHA30X96SIT 30 x 96 Ship Stair Single Single Wall 2-Point 3-1/2" Width Additional sizes and options available, call for more information.

Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com Rooftop Products | ROOF HATCHES 9 Equipment HATCH

Babcock-Davis’ Equipment Roof Hatch is engineered to accommodate extra large equipment access through roofs. With options like curb mounting and varied curb heights Babcock-Davis is sure to meet your equipment servicing needs.

FEATURES

LARGEST CLEAR OPENING Industry’s largest clear opening allows equipment up to 14’ by 20’ to be installed and serviced through the roof of your building.

STAINLESS STEEL MATERIAL Upgrade to corrosion resistant 304 stainless steel for corrosive environments such as waste water treatment facilities and coastal areas.

DETAILS FINISHES MATERIAL • Aluminum: 11 gauge, mill finish • Steel: 14 gauge galvanneal, powder coat • Stainless Steel: Type 304 14 gauge, 2B matte finish COVER Formed metal cover withstands a live load of 40psf with a Mill Red Oxide 2B Matte max deflection of 1/150 the span Powder Coat Stainless Steel CURB Single wall curb with EZ tab counterflash and mounting flange INSULATION 1 inch fiberglass in cover, 1 inch polyiso around curb GASKET Extruded EPDM adhesive backed gasket seal continuous around cover 85°85° --90 90° SPRING/HINGE ASSEMBLY Zinc plated steel tamper-proof hinge contained within spring assembly, includes steel compression spring HOLD OPEN ARM Zinc plated steel automatic hold open arm with red vinyl grip handle locks cover in open position 12" LATCH Zinc plated steel latch with exterior and interior turn handles 7" and padlock hasps

3-1/2" Width

STANDARD MODELS

GALVANIZED STEEL ALUMINUM STAINLESS STEEL SIZE (IN.) DOOR CURB BRHEG48X48S1T BRHEA48X48S1T BRHES48X48S1T 48 x 48 Single Single Wall BRHEG60X60D1T BRHEA60X60D1T BRHES60X60D1T 60 x 60 Double Single Wall BRHEG72X72D1T BRHEA72X72D1T BRHES72X72D1T 72 x 72 Double Single Wall BRHEG60X120D1T BRHEA60X120D1T BRHES60X120D1T 60 x 120 Double Single Wall

Additional sizes and options available, call for more information.

10 Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com Safety Railing ROOF HATCH FALL PROTECTION

Babcock-Davis’ OSHA compliant Safety Railing is ideal for new and retrofit applications. The safety railing mounts to the existing roof hatch curb counterflash without penetrating the membrane or curb.

8 7 6 5 4 3 2 1 FEATURES

EASY FIELD INSTALLATION No field cutting required as rails are cut to exact size. Easy assembly fittings and quick mounting on counterflash using a patented nut backing plate. D CHAIN CLOSURE Comes with standard chain barrier with easy D spring clip attachment to guard against falls. 1 2

OPTIONAL SELF CLOSING GATE (shown) Designed to 5 automatically close, the gate is constructed with spring loaded Safety Yellow Powder Coat option shown hinges to protect against falls.

DETAILS CMATERIAL Rails and posts, aluminum, 1-1/4 inch ID (1.66 inch OD) Schedule 40 pipe C FINISH Mill or Powder Coat, Safety Yellow FITTINGS Cast aluminum alloy with set screw hold 3 MOUNTING BRACKETS 3/16 inch steel, zinc plated with nut (HATCH SHOWN backing plate 42 inch FOR ILLUSTRATIVE Installed 4 PURPOSES ONLY) HARDWARE Hex head bolts 3/8 - 16 by 3/4 inch zinc plated steel Height EXIT Must be kept closed when roof hatch door is open • Self-Closing Gate: Aluminum, 1-1/4 inch ID (1.66 inch OD) Schedule 40 pipe, self-closing with coil spring COMPLIANCE OSHA 29 CFR 1910.29, 1910.28, 1910.23, 1926.502 and B 30" (INSIDE 1926.501 CURB LENGTH) B Inside Curb Width 43" (OVERALL)

STANDARD MODELS THERMALMAX™ MODELS

GATE CLOSURE GATE CLOSURE SPECIFICATIONS YELLOW MILL SIZE (IN.) ACCESS YELLOW MILL SIZE (IN.) ACCESS FITS HATCH SIZES UP TO 30" X 36", FOR SMALLER HATCH SIZES SRCAY36X30FG1 RAILS,SRCA36X30FG POSTS: GALVANIZED36 x PIPE 30 1 1/4"Front I.D. SCH 40 A53SRBAY36X30FG GRADE B SRBA36X30FG 36 x 30 Front SEAMED STEEL CUT RAILS TO LENGTH IN FIELD SRCAY36X36SG SRCA36X36SG 36 x 36 Front SRBAY36X36FG SRBA36X36SG 36 x 36 Front 2 GATE: GAVANIZED 1 1/4" TUBULAR STEEL SELF CLOSING WITH COIL CERTIFICATIONS: MEETS OSHA 29 CFR 1910.23 GUARDING SRCAY48X48FGSPRING,SRCA48X48FG ZINC PLATED 48 x 48 Front SRBAY48X48FG SRBA48X48FG 48 x 48FOR FrontOPENINGS REQUIREMENTS; SUPPORTS 200 LBS. FORCE SRCG36X30FG A SRCAY30X54SG3 COUNSRCA30X54SGTERFLASH MOUNTI30NG x B54RACKETSSide: 3/16"SRBAY30X54SG ZINC PLATED STEELSRBA30X54SG 30 x 54 Side TITLE: A FASTENED TO STEEL BACKING PLATE Safety Railings for Roof Hatch SRCAY30X72SG SRCA30X72SG 30 x 72 Side SRBAY30X96SG SRBA30X96SG 30 x 96 Side 36X30, Front Exit, 4 BOLTS: HEX HEAD BOLTS30 3 /x8" 96-16 x 3Side/4" GRADE 5 ZINC PLATED Steel, Galvanized, Self Closing Gate SRCAY30X96SG SRCA30X96SG 9300 73rd Avenue North Brooklyn Park, MN 55428 5 RAILING FITTINGS AND PLUGS: MANUFACTURER'S STANDARD CAST Additional sizesWITH available, SET SCREW call for HOL moreD information. NAME DATE SIZE DWG. NO. REV DRAWN DKL 10/7/09 B SRCG36X30FG A PROPRIETARY AND CONFIDENTIAL: THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF NYSTROM. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF NYSTROM IS PROHIBITED. RELEASED - - WEIGHT: 282.08 SHEET 1 OF 2 8 7 6 5 4 3 2 1 Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com Rooftop Products | FALL PROTECTION 11 Ladder Safety Post ROOF HATCH FALL PROTECTION

The Safety Post is designed to extend 42 inches above a landing platform to aid safe ladder access through a roof hatch. The spring assisted telescoping design mounts to the top two rungs of a fixed vertical ladder.

DETAILS STANDARD MODELS MATERIAL 1-1/2 inch by 1-1/2 inch by 1/8 inch high strength square tubing with a pull-up loop provided at the upper end MODEL MATERIAL FINISH to facilitate raising of post. BSPY Steel Powder Coat, Yellow • Steel: yellow powder coat paint or hot dip galvanized • Stainless Steel: Type 304, mill BSPG Steel Hot Dip Galvanized • Aluminum: Mill BSPA Aluminum Mill BALANCING SPRING Stainless steel constant force spring BSPS Stainless Steel Mill HARDWARE Type 316 stainless steel

Safety Grab Bar ROOF HATCH FALL PROTECTION

The Safety Grab Bar is engineered to provide safe access through roof hatches. The grab bar mounts to a corner section through the curb counterflashing.

DETAILS MATERIAL Rails and posts, aluminum, 1-1/4 inch ID (1.66 inch OD) Schedule 40 pipe FITTINGS Cast aluminum alloy with set screw hold MOUNTING BRACKETS 3/16 inch steel, zinc plated with nut backing plate HARDWARE Hex head bolts 3/8 inch - 16 by 3/4 inch zinc plated steel

STANDARD MODELS Safety Yellow Powder Coat option shown MODEL MATERIAL FINISH BSGBAY Aluminum Powder Coat, Safety Yellow BSGBA Aluminum Mill

12 Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com ™ SafeMAX (Single Door) SMOKE VENT

Babcock-Davis’ Single Door SafeMAX Smoke Vent, engineered with a metal cover, is ideal for factory, storage and warehouse occupancies, and hoistways. The single door smoke vent offers the largest effective vent area.

FEATURES

GREATER EFFECTIVE VENT AREA Reduce the number of smoke vents required on the roof with the industry’s largest 48 x 96 single door smoke vent.

OPTIONAL LOUVERED CURB Add additional ventilation with louvered curbs. Ideal for use in elevator shafts and hoistways.

DETAILS MATERIAL • Aluminum: 11 gauge, mill finish • Steel: 14 gauge galvanneal, high reflectance white powder coat COVER Formed metal cover with liner, internally stiffened to withstand a live load of 40psf CURB Single wall curb with EZ tab counterflash and mounting flange INSULATION 1 inch Polyiso R-6 in cover and around curb GASKET Extruded EPDM adhesive backed gasket seal, continuous around cover HINGE Heavy-duty pintle hinge with stainless steel hinge pins SPRING Gas spring with damper opens cover against 10psf snow load HOLD OPEN ARM Zinc plated steel automatic hold open arm locks cover in open position LATCH Zinc plated steel rotary latch designed to hold covers closed against 12" 30psf wind uplift. Opens manually by external and internal pull cables. Opens 8" automatically with a fusible link at standard temperature 165°F CERTIFICATIONS UL 793 Listed, FM 4430 Approved for 360° fuseable link

3-1/2" Width ORDER GUIDE

BASE MATERIAL WIDTH X LENGTH DOOR CURB OPENING LINK TEMP (°F) CLOSING — OPTIONS BSVS X —

A Aluminum Standard Sizes (W x L) S Single Door 1 Single Wall N No Electrical 165 350 R Rooftop Close SFM FM Labeled Curb & Cover 30" x 30" 36" x 30" 36" x 36" 2 Double Wall L 24VDC/24VAC 212 360 W Manual Winch OP1 Door Position Sensor B Galvanneal Curb 48" x 48" 48" x 72" 48" x 96" 280 450 / Aluminum 3 Curb Mount H 110VAC / 240VAC L Linear Actuator* B__ Burglar Bars Cover A Linear Actuator* Additional size options W Galvanneal Curb & Cover also available. *Voids UL

Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com Rooftop Products | SMOKE VENTS 13 ™ SafeMAX (Double + Quad Door) SMOKE VENT

The standard Double and Quad Door SafeMAX Smoke Vent, engineered with metal covers, is ideal for factory, storage and warehouse occupancies.

FEATURES

SECURE CLOSURE The reliable rotary latch has been third party independently tested to hold smoke vent covers closed against a 135psf wind uplift.

OPTIONAL 2 INCH INSULATION Optimize energy efficiency and upgrade thermal insulation to R-12 with 2 inch of Polyiso in the cover and curb while maintaining UL Listing.

DETAILS LATCH Zinc plated steel rotary latch designed to hold covers closed against 135psf wind uplift. Opens manually by external MATERIAL and internal pull cables. Opens automatically with a fusible Aluminum: 11 gauge, mill finish • link at standard temperature 165°F. • Steel: 14 gauge galvanneal, high reflectance white powder coat CERTIFICATIONS UL 793 Listed, FM 4430 Approved for 360° fuseable link COVER Formed metal cover with liner, internally stiffened to withstand a live load of 40psf CURB Single wall curb with EZ tab counterflash and mounting flange INSULATION 1 inch Polyiso R-6 in cover and around curb GASKET Extruded EPDM adhesive backed gasket seal, continuous around cover 12" HINGE Heavy-duty pintle hinge with stainless steel hinge pins 8" SPRING Gas spring with damper opens cover against 10psf snow load

HOLD OPEN ARM Zinc plated steel automatic hold open arm 3-1/2" Width locks cover in open position

ORDER GUIDE

BASE MATERIAL WIDTH X LENGTH DOOR CURB OPENING LINK TEMP (°F) CLOSING — HOLD OPTIONS BSVS X —

A Aluminum Standard Sizes (W x L) D Double Door 1 Single Wall N No Electrical 165 350 R Rooftop Close SFM FM Labeled Curb & Cover 48" x 48" 48" x 72" 48" x 96" Q Quad Door 2 Double Wall L 24VDC/24VAC 212 360 W Manual Winch OP1 Door Position Sensor B Galvanneal Curb 60" x 60" 60" x 96" 60" x 120" 280 450 / Aluminum 72" x 72" 72" x 96" 3 Curb Mount H 110VAC / 240VAC L Linear Actuator* B__ Burglar Bars Cover A Linear Actuator* W Galvanneal Curb & Cover Additional size options also available. *Voids UL

14 Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com LightMAX™ eco SMOKE VENT

The LightMAX eco sets the new standard for UL793 listed daylighting smoke vents. Now available with mutliple curb options, burglar bars, safety railing ready and other security options.

FEATURES

INNOVATIVE DESIGN Innovative patent-pending design means better performance, easier install and lower cost.

NATURAL DAYLIGHTING Add the traditional look of a domed skylight and added sustainability benefit of natural daylighting.

®

DETAILS COVER Extruded aluminum frame, 11 gauge, mill finish, with SIZES polycarbonate dome to withstand a live load of 40psf. • Double Door: 48 inches by 48 inches to 48 inches by 96 inches CURB Single wall curb with apron mount Quad Door: 48 inches by 96 inches to 48 inches by 192 inches GASKET Extruded EPDM adhesive backed gasket seals • CERTIFICATIONS UL 793 Listed HINGE Patent-pending extruded hinge, continuous SPRING Gas spring damper opens cover against 10psf snow load HOLD OPEN ARM Hold open arm integrated into the gas spring, locks cover in fully open position LATCH Zinc plated steel rotary latch designed to hold covers closed against 90psf wind uplift. Opens manually by external and internal pull cables. Opens automatically with a fusible link at standard temperature 165°F. 10" 8" OPERATION Opens automatically with fusible link and manual pull handles. 3-3/4" 48" ORDER GUIDE

BASE WIDTH X LENGTH DOOR CURB OPENING LINK TEMP (°F) CLOSING — OPTIONS BSVEA X —

Standard Sizes (W x L) D Double Leaf 1 Single Wall N No Electrical 165 350 R Rooftop Close Dome, Polycarb. LPW White 30" x 30" 36" x 30" 36" x 36" Quad Leaf Double Wall 24VDC/24VAC 212 360 Q 2 L LPC Clear 48" x 48" 48" x 72" 48" x 96" 280 450 3 Curb Mount H 110VAC / 240VAC Double Dome, Polycarb. 4 Double Wall no Counterflash LPWW White/White LPCW Clear/White 5 Double Wall / Apron Mount Additional size options Multiwall also available. 6 Low Profile Curb Mount* LMC Clear LMZ Bronze LMB Blue LMG Green *Note: Low profile curb mount has limited options. Call for more information.

Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com Rooftop Products | SMOKE VENTS 15 ™ LightMAX (Single Door) SMOKE VENT

Providing natural daylighting, the Single Door LightMAX Smoke Vent is engineered with a translucent cover. This smoke vent includes a clear or color tinted multiwall panel or optional domes that are ideal for use in factory, storage and warehouse commercial buildings.

FEATURES

MULTIWALL LIGHT TRANSMISSION Add optional color panels (pg. 25) to change natural daylighting characteristics.

OPTIONAL DOME Add the traditional look of a domed skylight with 1/8 inch thick UV coated polycarbonate available in clear, white or bronze colors.

DETAILS COVER Extruded aluminum frame, 11 gauge, mill finish, with LATCH Zinc plated steel rotary latch designed to hold covers 5/8 inch 3 layer structural multiwall R-3 in white polycarbonate. closed against 30psf wind uplift. Opens manually by external Cover withstands a live load of 40psf. and internal pull cables. CURB Single wall curb with EZ tab counterflash and mounting CERTIFICATIONS UL 793 Listed flange • Aluminum: 11 gauge, mill finish • Steel: 14 gauge galvanneal, high reflectance white powder coat INSULATION 1 inch Polyiso R-6 around curb perimeter GASKET Extruded EPDM adhesive backed gasket seal, continuous around cover HINGE Heavy-duty pintle hinge with stainless steel hinge pin SPRING Gas spring damper opens cover against 10psf snow load 12" 8" HOLD OPEN ARM Zinc plated steel automatic hold open arm locks cover in open position

3-1/2" Width ORDER GUIDE

BASE MATERIAL WIDTH X LENGTH DOOR CURB OPENING LINK TEMP (°F) CLOSING — OPTIONS BSVL X —

A Aluminum Standard Sizes (W x L) S Single Door 1 Single Wall N No Electrical 165 350 R Rooftop Close Dome, Polycarb. Curb & Cover LPW White 30" x 30" 36" x 30" 36" x 36" Double Wall 24VDC/24VAC 212 360 Manual Winch 2 L W LPC Clear B Galvanneal Curb 48" x 48" 48" x 72" 48" x 96" 280 450 / Aluminum 3 Curb Mount H 110VAC / 240VAC Double Dome, Polycarb. Cover LPWW White/White LPCW Clear/White Additional size options Multiwall also available. LMC Clear LMZ Bronze LMB Blue LMG Green

16 Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com ™ LightMAX (Double + Quad Door) SMOKE VENT

The Double and Quad Door LightMAX Smoke Vent is engineered with translucent covers using polycarbonate for the added sustainability benefit of natural daylighting. With options like color panels, and electrical operation, Babcock- Davis is sure to meet your building sustainability and fire and life safety needs.

FEATURES

MULTIWALL LIGHT TRANSMISSION Add optional color panels (pg. 25) to change natural daylighting characteristics.

OPTIONAL DOME Add the traditional look of a domed skylight with 1/8 inch thick UV coated polycarbonate available in clear, white or bronze colors.

DETAILS COVER Extruded aluminum frame, 11 gauge, mill finish, with LATCH Zinc plated steel rotary latch designed to hold covers 5/8 inch 3 layer structural multiwall R-3 in white polycarbonate. closed against 90psf wind uplift. Opens manually by external Cover withstands a live load of 40psf. and internal pull cables. CURB Single wall curb with EZ tab counterflash and mounting CERTIFICATIONS UL 793 Listed flange • Aluminum: 11 gauge, mill finish • Steel: 14 gauge galvanneal, high reflectance white powder coat INSULATION 1 inch Polyiso R-6 around curb perimeter GASKET Extruded EPDM adhesive backed gasket seal, continuous around cover HINGE Heavy-duty pintle hing with stainless steel hinge pin SPRING Gas spring damper opens cover against 10psf snow load 12" 8" HOLD OPEN ARM Zinc plated steel automatic hold open arm locks cover in open position 3-1/2" Width

ORDER GUIDE

BASE MATERIAL WIDTH X LENGTH DOOR CURB OPENING LINK TEMP (°F) CLOSING — OPTIONS BSVL X —

A Aluminum Standard Sizes (W x L) D Double Door 1 Single Wall N No Electrical 165 350 R Rooftop Close Dome, Polycarb. Curb & Cover LPW White 48" x 48" 48" x 72" 48" x 96" Quad Door Double Wall 24VDC/24VAC 212 360 Manual Winch Q 2 L W LPC Clear B Galvanneal Curb 60" x 60" 60" x 96" 60" x 120" 280 450 / Aluminum 72" x 72" 72" x 96" 3 Curb Mount H 110VAC / 240VAC Double Dome, Polycarb. Cover LPWW White/White LPCW Clear/White Additional size options Multiwall also available. LMC Clear LMZ Bronze *Voids UL LMB Blue LMG Green

Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com Rooftop Products | SMOKE VENTS 17 ™ AcousticMAX (STC 48/STC 50) SMOKE VENT

Block the intrusion of exterior environmental noise with Babcock-Davis’ AcousticMAX Smoke Vent. Perfect for theaters and performing arts centers; every detail is designed with precision.

FEATURES

SUPERIOR THERMAL PERFORMANCE The BSVY (STC-50) AcousticMAX R-14 energy-efficient smoke vent is designed to save money with reduced heat loss.

INNOVATIVE SOUND CONTROL Designed to keep out unwanted noises ensuring acoustical integrity when all you want to hear is the performance.

PREFINISHED BLACK INTERIOR Eliminate field painting hassle with the prefinished interior that seamlessly STC 48 STC 50 OITC 36 OITC 39 integrates into the ceiling.

DETAILS Gas spring with damper opens cover against 10psf SOUND RATING(S) Independent third party tested to ASTM E90 SPRING and ASTM E1332 snow load • BSVX: STC 48 - OITC 36 HOLD OPEN ARM Zinc plated steel automatic hold open arm • BSVY: STC 50 - OITC 39 locks cover in open position MATERIAL 14 gauge galvanneal steel; powder coat LATCH Zinc plated steel rotary latch designed to hold covers closed against 90psf wind uplift FINISH High Reflectance White exterior cover with black interior liner and black curb OPERATION Opens automatically with a fusible link and manual pull handles COVER Metal with liner, withstands a live load of 40psf with a max deflection of 1/150 the span CERTIFICATIONS UL 793 Listed, FM 4430 Approved for 360° fuseable link, CURB Double wall curb with EZ tab counterflash and mounting flange and IBC1207 Compliant (BSVY only) INSULATION Mineral wool and sound mat in cover and curb • BSVX: Total R-10 4-1/4" • BSVY: Total R-14 GASKET Extruded EPDM adhesive backed gasket seals

Stainless steel heavy duty pintle hinge 3-3/4" HINGE 12" 8"

6-1/2" Width ORDER GUIDE

BASE RATING MATERIAL WIDTH X LENGTH DOOR CURB OPENING LINK TEMP (°F) CLOSING — OPTIONS BSV G X —

X STC 48 G Standard Sizes (W x L) D Double Door 2 Double Wall N No Electrical 165 350 R Rooftop Close SFM FM Labeled Galvanneal 48” x 48” 48” x 72” 48” x 96” 212 360 Y STC 50 Steel Q Quad Door 3 Curb Mount L 24VDC/24VAC W Manual Winch OP1 Door Position 60” x 60” 60” x 96” 60” x 120” 280 450 Sensor 72” x 72” 72” x 96” H 110VAC / 240VAC L Linear Actuator* B__ Burglar Bars Additional size options A Linear Actuator* also available. *Voids UL

18 Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com Safety Railing SMOKE VENT FALL PROTECTION

Babcock-Davis’ OSHA compliant Safety Railing is ideal for new and retrofit applications. The safety railing mounts to the existing smoke vent curb counterflash without penetrating the membrane or curb.

FEATURES

FALL PROTECTION In accordance with OSHA regulations, the safety railing is engineered to guard smoke vent openings to protect against falls.

EASY FIELD INSTALLATION No field cutting required as rails cut to exact size. Easy assembly fittings and quick mounting on counterflash through curb.

DETAILS MATERIAL Rails and posts, aluminum, 1-1/4 inch ID (1.66 inch) Schedule 40 pipe FITTINGS Cast aluminum alloy with set screw hold MOUNTING BRACKETS 3/16 inch steel, zinc plated with nut backing plate 42 inch Installed HARDWARE Hex head bolts 3/8 inch - 16 x 3/4 inch zinc plated steel Height COMPLIANCE OSHA 29 CFR 1910.28 and 1910.29

ORDER GUIDE Inside Curb Width

4-SIDED 2-SIDED MODEL SIZE (IN.) MODEL SIZE (IN.) SRVAY36X30NN 36 x 30 SRVAY48XNNTN 48 SRVAY36X36NN 36 x 36 SRVAY60XNNTN 60 SRVAY48X48NN 48 x48 SRVAY72XNNTN 72 SRVAY48X96NN 48 x 96 SRVAY60X96NN 60 x 96 SRVAY60X120NN 60 x 120 SRVAY60X144NN 60 x 144 SRVAY72X144NN 72 x 144

Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com Rooftop Products | SMOKE VENTS 19 Burglar Bars SMOKE VENT FALL PROTECTION

Babcock-Davis’ Burglar Bars, a smoke vent accessory, are designed for security and safety and to prevent unauthorized entry. Engineered for each smoke vent, these bars are available on new installations as a factory installed option.

DETAILS MATERIAL Steel, 1/2 inch or 3/4 inch diameter SPACING 6 inch by 6 inch, 6 inch by 12 inch or custom

ORDER GUIDE DIAME- MODEL SPACING TER B1A 1/2" 6" x 12" B1B 1/2" 6" x 6" B2A 3/4" 6" x 12" B2B 3/4" 6" x 6"

Screen SMOKE VENT FALL PROTECTION

The Fall Protection Screen, a smoke vent safety product, is designed to aid in fall protection. This sturdy screen, spaced 4 inch apart with fully welded intersections is available on new installations as a factory install option on each smoke vent. Third party tested with a drop test of 400 pounds of 30 inch diameter sandbag from 42 inches.

DETAILS MATERIAL Steel, 0.163 inch diameter SPACING 4 inch by 4 inch COMPLIANCE OSHA 1926.502c and 1910.28

ORDER GUIDE

MODEL DIAMETER SPACING B3C 0.163" 4" x 4"

20 Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com Weighted Base GUARDRAIL FALL PROTECTION

The OSHA compliant portable railing system is designed to keep people safe while working on rooftops and other structures. No need for tie- off points and expensive safety equipment.

FEATURES

PORTABLE BASE The weighted base is designed to be portable and installed where permanent mounting is not an option EASY INSTALLATION The posts and rails are easy to assemble and install. COORDINATING COLORS The system comes with a standard powder coat finish that is available in a wide range of colors to match your building’s exterior.

DETAILS MATERIALS • Weighted Base and Post Assembly: Steel, 1-1/4 inch ID (1.66 inch OD) Schedule 40 pipe Fixed Rail • Horizontal and Corner Rails: 1-5/8 inch by .065 inch Steel FINISH Powder Coat

RAIL FASTENERS 3/8 inch - 16 by 1 inch zinc plated steel 21" COMPLIANCE OSHA 29 CFR 1910.28 and 1910.29 Adjustable Rail 42" MODELS 46"

MODEL DESCRIPTION DIMENSION MATERIAL + FINISH Weighted Base Steel, BGR-WBP-ASM-RN 26.875" x 46" and Post Powder Coat Steel BGR-WBPR-004-RN Fixed Rail* 4' Adjustable Corner Powder Coat Steel BGR-WBPR-005-RN Fixed Rail* 5' Powder Coat Steel BGR-WBPR-008-RN Fixed Rail* 8' Powder Coat Steel BGR-WBPR-010-RN Fixed Rail* 9'- 10" Powder Coat 26.875" Steel BGR-WBPR-ADJ-043-RN Adjustable Rail* 2'-5" to 3'-9" Powder Coat Steel BGR-WBPR-ADJ-070-RN Adjustable Rail* 3'-9" to 5'-10" Powder Coat Steel BGR-WBPR-ADJ-120-RN Adjustable Rail* 5'-10" to 10' Powder Coat Adjustable Steel BGR-WB-AC Corner* Powder Coat *Note: Rails and corners are sold in sets of 2. Rails include 2 rails, 1 post and weighted base. When ordering, please be sure to include 1 additional weighted base.

Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com Rooftop Products | FALL PROTECTION 21 Perimeter GUARDRAIL FALL PROTECTION

The OSHA compliant Permanent Guardrail system’s unique bracket installs under the drip edge, coping cap, gravel stop or gutter system without penetrating the roofing system and allows for retro fit installations.

FEATURES

PERMANENT MOUNT The edge mounted guardrail system does not penetrate the roof membrane and installs under the coping and roof flashing. EASY INSTALLATION The posts and rails are easy to assemble and install. COORDINATING COLORS The system comes with a standard powder coat finish that is available in a wide range of colors to match your building’s exterior.

DETAILS Fixed Rail MATERIALS • Post and Bracket Assembly: Steel, 1-1/4 inch ID (1.66 inch OD) Schedule 40 pipe • Horizontal and Corner Rails: 1-5/8 inch by .065 inch Steel Adjustable Rail FINISH Powder Coat STRUCTURAL FASTENERS • Wood: RSS structural screws • Concrete: Caliburn PH concrete pan head screw 3/8 inch - 16 x 1 inch zinc plated steel RAIL FASTENERS Corner Rail COMPLIANCE OSHA 29 CFR 1910.28 and 1910.29

STANDARD MODELS

MODEL DESCRIPTION DIMENSION MATERIAL + FINISH BFP-GRPLG Edge Mount Post 42" Steel, Powder Coat BFP-GRF60 Fixed Rail* 5' Steel, Powder Coat BFP-GRF96 Fixed Rail* 8' Steel, Powder Coat BFP-GRF118 Fixed Rail* 9'- 10" Steel, Powder Coat BFP-GRA43 Adjustable Rail* 2'-5" to 3'-9" Steel, Powder Coat Post BFP-GRA70 Adjustable Rail* 3'-9" to 5'-10" Steel, Powder Coat BFP-GRA120 Adjustable Rail* 5'-10" to 10' Steel, Powder Coat BFP-GRC12 Corner Rail* 12" Steel, Powder Coat

*Note: Rails and corners are sold in sets of 2.

22 Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com Complementary Exterior Products

Coastal Zone EXTERIOR ACCESS DOOR The Babcock-Davis Coastal Zone Exterior Access Door is the only door in the industry that meets the requirements of Miami-Dade county and State of Florida building codes for impact, air and wind pressure. The Coastal Zone door is available in a variety of sizes up to 36 inches by 48 inches and has an R-11 thermal value. DETAILS DOOR 24 gauge Steel FRAME 0.080 inch 6063-T5 Extruded Aluminum INSTALLATION Wall FLANGE Exposed FL HINGE Stainless Steel Continuous Piano Approved FL21058-R1 LATCHES • Non-Locking Handle • Locking Handle ORDER GUIDE FINISH BASE LATCH WIDTH X LENGTH OPTIONS • Door: Paint Grip Finish • Frame: Mill XT X - H 1.6 inch Polyurethane; R-11 A Non-Locking Handle Standard Sizes (W x L) C Drip cap INSULATION 18" x 18" 24" x 30" L Locking Handle EPDM Self-Adhesive, Continuous 20" x 30" 24" x 36" GASKETING 24" x 24" 36" x 36" COMPLIANCE Tested to Miami-Dade County Performance Requirements, Florida Product Approval FL21058-R1 Rough opening is door size. Additional sizes available up to 36" x 48", call for more information. Exterior ACCESS DOOR The Babcock-Davis Exterior Access Door provides access from the exterior of your building with benefits like mortise locks to match building keys and 1.6 inches of tough, climate-proof insulation. DETAILS DOOR 24 gauge Steel FRAME 0.080 inch 6063-T5 Extruded Aluminum INSTALLATION Ceiling or Wall FLANGE Exposed or Plaster/Stucco Bead HINGE Stainless Steel Continuous Piano ORDER GUIDE LATCHES BASE FLANGE LATCH WIDTH X LENGTH OPTIONS Non-Locking Handle Locking Handle • • X X • Screwdriver Cam Latch • Mortise Lock Prep T 1 inch Flange A Non-Locking Handle Standard Sizes (W x L) A Aluminum Door FINISH P Plaster/ C Screwdriver Cam Latch 12" x 12" 24" x 24" C Drip Cap • Door: Paint Grip Finish Stucco bead 16" x 16" 24" x 30" • Frame: Mill L Locking Handle 18" x 18" 24" x 36" P Padlock Hasp 20" x 30" 36" x 36" M Mortise Lock (1-1/8") Prep S Stainless Steel, Type 304 INSULATION 1.6 inch Polyurethane; R-11 GASKETING EPDM Self-Adhesive, Continuous Rough opening is door size. Additional sizes available up to 48" x 60", call for more information.

Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com Rooftop Products | ACCESS DOORS 23 Access

Ladder Ship Stair Alternating Tread Stair Service Stair

Locks (Roof Hatch)

MODEL TYPE BRAND DESCRIPTION LOCK ACCESS

D11 Detention Brinks 7016 Keyed Lock Interior + Exterior D5A Detention Southern Steel 1010AM Prep Only Interior + Exterior D2A Detention Southern Steel 1010A Prep Only Interior Only Detention Lock Mortise Operated Detention Brinks 7016 Keyed Lock Interior Only Deadbolt D12 MS1 Mortise Schlage Cylinder/Deadbolt Keyed Lock Interior + Exterior Additional locks and options available, call MS2 Mortise Schlage Cylinder/Deadbolt Keyed Lock Interior Only 1.888.412.3726 for more information. MB4 Mortise Best Cylinder/Schlage Deadbolt Non-Keyed w/Plastic Core Interior + Exterior

Operations (Smoke Vent)

OPENING

Fusible Link Electrical Pull Handle H - 110/120 (External & Internal) L - 24

CLOSING SECURITY

Linear Actuator Rooftop Close Manual Winch L Door Position R W Sensor OP1 Note: Also available on Roof Hatches

24 Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com Curbs

Single Wall Double Wall Curb Mount No Counterflash Apron Mount 1-1/2" Curb Mount 1 2 3 4 5 6

CURB HEIGHT PITCH CORRECTION INSULATION VENTILATION

6 inch - 48 inch Match Roof Pitch 1 inch Polyiso 2 inch Polyiso Louvered Curb H6 - H48 P__ IPP IRR V33

Domes (Roof Hatch + Smoke Vent)

COLOR GLAZING LIGHT SOLAR R-VALUE TRANSMISSION FACTOR Clear Single 92% 85% 1.25 White Single 56% 56% 1.25 Bronze Single 27% 35% 1.25 Clear White Bronze Clear/Clear Double 92% 85% 2.0 (Standard) LPW LPZ Clear/White Double 56% 56% 2.0

Note: Clear single glazing is the standard option, other options have additional charges and may require longer lead times.

Multiwall (Smoke Vent)

COLOR LIGHT SOLAR SHADING TRANSMISSION FACTOR COEFFICIENT Clear 74% 75% 0.86 White 52% 63% 0.72 Bronze 37% 57% 0.65

White Clear Note: White is the standard color, all other colors have (Standard) LMC additional charges and may require longer lead times.

Bronze LMZ

Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com Rooftop Products | CONFIGURABLE OPTIONS 25 Powder Coat FINISH OPTION STOCK COLORS Babcock-Davis’ polyester based powder coatings demonstrate superior gloss and color retention in a variety of outdoor environments. Powder coat provides outstanding corrosion resistance and exhibits excellent mechanical properties. Red Oxide High Reflectance ANSI 70 Gray FP2 White FP44 FP1 APPLICATION Steel or Aluminum WARRANTY 5 year NOTE Red Oxide and High Reflectance White are the base colors of Roof Hatches and Smoke Vents, all other colors have additional charges and may require longer lead times. Safety Yellow FP48 Custom colors available, call STANDARD COLORS Readily available, but not stocked by Babcock-Davis. 888.412.3726 for more information.

Coastal White Bone White Sandstone Sierra Tan FP68 FP3 FP5 FP8

Colonial Red Dark Bronze Charcoal Gray Super Black FP20 FP14 FP7 FP4

SPECIAL ORDER Common industry colors, special order.

Fine Ivory Seawolf Tan Slate Gray River Rouge Brick Red FP13 FP15 FP17 FP6 FP21 FP19

Brown Military Blue Arcadia Green Hemlock Green Forest Green Teal FP18 FP10 FP23 FP24 FP25 FP22

This color chart is for reference only and is not to be used for final color / material matching. Babcock-Davis is not responsible or liable for color matches made with this chart.

26 Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com Anodize FINISH OPTION

Protective and decorative anodizing applied to aluminum creates a corrosion resistant finish.

The clear finish (FA1) uses sulfuric Class II coating with a 0.4-0.7 mil thickness. Clear Champagne Light Bronze Medium FA1 / FA2 FA3 FA4 Bronze FA5 The clear finish (FA2) and integral color uses Duranodic with 0.7 mil and thicker.

APPLICATION Aluminum WARRANTY 5 year

Dark Bronze Extra Dark Black FA6 Bronze FA7 FA8 Trinar® FINISH OPTION STANDARD COLORS Trinar ® is a high performance fluoropolymer coating with 70% Polyvinylidene Fluoride (PVDF) and provides maximum resistance against color fade and chalking. The most durable and long lasting finish in the industry; meets or exceeds AAMA 620/621 and AAMA 2605. Polar White Bone White Taupe Dove Gray Slate Gray FK80 FK81 FK82 FK83 FK84 APPLICATION Aluminum WARRANTY 10 year (standard) or 20 year

Galaxy Blue Forest Green Autumn Medium Black FK85 FK86 FK87 Bronze FK88 FK89

SPECIAL ORDER Common industry colors, special order.

White Stone Surrey Beige Sandstone Medium Taupe Seal Brown FK90 FK91 FK92 FK93 FK94

Milano Blue Aged Copper River Rouge Bright Silver Copper FK95 FK96 Red FK96 FK98 FK99

Download Drawings, CAD, Spec, and LEED documents at www.BabcockDavis.com Rooftop Products | CONFIGURABLE OPTIONS 27 Great Products. Better Partners.

®

9300 73RD AVENUE NORTH BROOKLYN PARK, MN 55428

(888) 412-3726 (888) 312-3726 FAX

WWW.BABCOCKDAVIS.COM

ROOFTOP PRODUCT CATALOG 2/21