02013R1387 — EN — 01.07.2016 — 005.001 — 1
This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document
►B COUNCIL REGULATION (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011 (OJ L 354, 28.12.2013, p. 201)
Amended by:
Official Journal
No page date ►M1 Council Regulation (EU) No 722/2014 of 24 June 2014 L 192 9 1.7.2014 ►M2 Council Regulation (EU) No 1341/2014 of 15 December 2014 L 363 10 18.12.2014 ►M3 Council Regulation (EU) 2015/982 of 23 June 2015 L 159 5 25.6.2015 ►M4 Council Regulation (EU) 2015/2449 of 14 December 2015 L 345 11 30.12.2015 ►M5 Council Regulation (EU) 2016/1051 of 24 June 2016 L 173 5 30.6.2016
Corrected by:
►C1 Corrigendum, OJ L 293, 9.10.2014, p. 57 (1387/2013) ►C2 Corrigendum, OJ L 293, 9.10.2014, p. 58 (722/2014) 02013R1387 — EN — 01.07.2016 — 005.001 — 2
▼B COUNCIL REGULATION (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011
▼M3 Article 1
1. The autonomous Common Customs Tariff duties for the agri cultural and industrial products listed in ►M4 the Annex ◄ are hereby suspended. 2. Paragraph 1 does not apply to any mixtures, preparations or products made up of different components containing products listed in ►M4 the Annex ◄. ▼B
Article 2
1. The Commission may at any time review the suspensions for the products listed in ►M4 the Annex ◄ in the following cases: (a) at its own initiative; (b) at the request of Member States. ▼M4 2. The Commission shall review the suspensions for products listed in the Annex during the year preceding the end date for mandatory review provided for in that Annex.
Article 3
Where a declaration for release for free circulation is presented for the products in relation to which the supplementary units have been provided in the Annex, the exact quantity of the products imported shall be entered in ‘Box 41: Supplementary units’ of that declaration using the measurement unit set out in the Annex. ▼B
Article 4
Regulation (EU) No 1344/2011 is hereby repealed.
Article 5
This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union. It shall apply from 1 January 2014. This Regulation shall be binding in its entirety and directly applicable in all Member States. 02013R1387 — EN — 01.07.2016 — 005.001 — 3
review mandatory End date for End date
31.12.2020 31.12.2018 31.12.2018 31.12.2016 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2 ) (
1 0 % 0 Leuco
) , 2 ) (
1 Lepista , 0 % 0 , frozen, of a thickness a of , frozen, Clitocybe ,
) 2 ) (
1
Calocybe , , dried, whole or in identifiable slices or slices identifiable in or whole , dried, Hortense axiphium ANNEX
, provisionally preserved in brine, sulphur , fresh, for use in the manufacture (excluding manufacture use in the for , fresh,
)
Agaricus 1 0 % 0 Agaricus 0 % 0 of the variety Tricholoma and , uncooked or cooked by steaming or boiling frozen, not in water,
)
), in pieces, frozen Pisum sativum 1
Vaccinium macrocarpon Lyophyllum , Vaccinium
)
Ananas comosus 1 Leucopaxillus , of not more than 6 mm, to be used, in their pods, in the manufacture of prepared meals ( meals of prepared pods, of not more than 6 mm, to be used, in their in the manufacture agaricus solutions, consumption, water, or in but other preservative for immediate unsuitable in that state for ( the food-canning industry genus the of mushrooms Mushrooms, excluding ( sale retail other than repacking simple for pieces, for treatment industries ( matter sweetening other or containing added sugar or other sweetening matter packing) of products of drink or food industries ( packing) of products of drink or food industries Description Fresh or chilled chanterelles for treatment other than simple repacking for retail sale ( sale retail for repacking simple than other treatment for species chanterelles the chilled of or pods, genera Fresh in the Peas of mushrooms excluding sale Bamboo retail shoots, not put up frozen, for Mushrooms, species the genus of or dried, for use Dates, fresh in the (excluding manufacture packing) of products of drink or food the Cranberries of Fruit ( sale retail not containing added sugar, put up for Boysenberries, frozen, Pineapple Rose-hips, uncooked or cooked frozen, not containing added by sugar steaming or boiling in water, 10 10 31 70 10 10 50 11 30 10 20 30 40 TARIC CN code 0811 90 50 0811 90 70 0811 90 ex 0712 32 00 ex 0712 33 00 ex 0710 21 00 ex 0710 80 95 ex 0711 59 00 ex 0712 39 00 ex 0804 10 00 ex 0810 40 50 ex 0811 90 95 ex 0811 90 95 ex 0811 90 95 ex 0811 90 95 *ex 0709 59 10 M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 4
review mandatory End date for End date
31.12.2016 31.12.2020 31.12.2018 31.12.2019 31.12.2016 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
) 1
cosmetics, washing products products, or pharmaceutical products, pharmaceutical washing products or sunflower oil, Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of: Palm oil, coconut oil, palm kernel oil, for the manufacture (copra) 10, 19 3823 subheading of acids fatty monocarboxylic — industrial — of heading acids 2915 of fatty or 2916, methyl esters — fatty alcohols of subheadings 2905 17, 2905 19 and 3823 70 16, of cosmetics, pure or mixed, used the manufacture for — alcohols of subheading fatty 2905 used for the manufacture of 00, 11 3823 subheading of acid — stearic or 3401, heading of — goods ( 2915 heading of purity high with acids — fatty or 3823 heading of acid linoleic — conjugated ( — of heading acid 2916 of linoleic or methyl esters ethyl- % of docosahexaenoic acid but than % or more not more 50 acid or 35 process subjected to any texturisation % docosahexaenoic acid and standardized with high oleic than 65 more but not % or or 12 (HOSO) sunflower oil Preparation in powder form containing by weight: % of wheat derived Maltodextrin, but than 35 % or more not more — 15 % of whey serum), (milk but than 35 % or more not more — 15 bleached, % of refined, deodorised and non-hydrogenated % or more but — not more than 30 10 Description Refined safflower oil (Safloröl, CAS RN 8001-23-8) for use in the manufacture of manufacture the in use for 8001-23-8) RN CAS (Safloröl, oil safflower Refined arachidonic % of 50 than but not more more % or 35 containing by weight refined, oil, Vegetable and not modification chemical any further without hydrogenated and interesterified, Jojoba oil, % arachidonic acid % or more but not more than 50 containing Vegetable oil, refined, by weight 25 20 20 20 20 20 39 20 45 10 92 20 10 TARIC CN code ex 1511 90 91 ex 1513 11 10 ex 1513 19 30 ex 1513 21 10 ex 1901 90 99 ex 1512 19 10 ex 1515 90 99 ex 1516 20 96 ex 2106 90 98 ex 1513 29 30 *ex 1511 90 19 *ex 1517 90 99
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 5
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2017 31.12.2017 31.12.2017 31.12.2017 31.12.2017 Unit Supplementary - - )
)
- - - 3 3 ) ) )
- -
3 3 3 duty 0 % 9% ( 6% ( 6% ( Rate of 7,8% ( 11,5% ( autonomous
0 % 0 (L.) Wilczek), not put up for Wilczek), (L.)
) ) ) ) ) 1 1 1 1 1 Vigna radiata
, spp., spp., spp., spp., Malpighia Musa cavendish Mangifera Carica Psidium
— with a sugar content by weight of more than 13 % but not more than 30 % % but not than 30 more — with a sugar content by than 13 weight of more ( of products of food for use in the manufacture and drink industry Transparent noodles, cut in pieces, obtained from beans ( retail sale Acerola puree concentrate, obtained by cooking: Genus the — of Acidified banana puree concentrate, obtained by cooking: Genus the — of % % but not than 30 more — with a sugar content by than 13 weight of more ( of products of food for use in the manufacture and drink industry cooking: by obtained concentrate, Mango puree Genus the — of % 30 than more not of weight by content sugar a — with ( of products of food for use in the manufacture and drink industry obtained by cooking: Papaya puree concentrate, Genus the — of % % but not than 30 more — with a sugar content by than 13 weight of more ( of products of food for use in the manufacture and drink industry obtained by cooking: concentrate, Guava puree Genus the — of % % but not than 30 more — with a sugar content by than 13 weight of more ( of products of food for use in the manufacture and drink industry — 10 % or more but not more than 30 % of blended, aged spray dried cheese, but than 30 % or more not more — 10 % of buttermilk, and more but not than 15 % or more — 5 % of sodium disodium caseinate, phosphate, acid lactic % or more but not more than 10 — 0,1 Description than 5 kg content of more packings a net of Bamboo immediate in shoots, or preserved, prepared 10 81 82 83 93 84 85 20 91 92 10 94 95 10 TARIC CN code ex 1902 30 10 ex 2007 99 50 ex 2007 99 50 ex 2007 99 50 ex 2007 99 50 ex 2007 99 50 ex 2007 99 50 ex 1903 00 ex 2005 91 00 ex 2007 99 50 ex 2007 99 50 ex 2007 99 93 ex 2007 99 50 ex 2007 99 50
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 6
review mandatory End date for End date
31.12.2017 31.12.2020 31.12.2019 31.12.2017 31.12.2020 31.12.2020 Unit Supplementary - )
- - -
3 - - 8% 6% duty 0 % 0 % Rate of 0 % ( 0 % autonomous 0 % 0 ) peeled, washed, blanched,
)
1
)
1
, in brine, containing by , in brine, weight: Eleocharis tuberosa or
)
2
)
) (
4 1 Karakishmish , Eleocharis dulcis
Mangifera 192-1995 products of food processing industries ( food processing industries products of concentrate, from — not genus the — of — of a Brix value 14 or more, but not than more 20 ( of products used of drink industry in the manufacture or not containing added boysenberry sugar whether Seedless puree not containing added spirit, genus the of leaves Blanched vine of products of food industry for use in the manufacture and for chilled individually quick-frozen ( treatment other than simple repacking Pineapple juice: concentrate, from — not — more than 6 % of salt concentration, % of salt — than more 6 acid monohydrate, and expressed as citric % of acidity than 1,4 % or more but not — 0,1 CODEX STAN according sodium benzoate 000 mg/kg of — 2 than not more not but or whether ( vine of stuffed leaves with for use rice in the manufacture Description Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of manufacture the for processing, as alone packing excluding cranberries, dried Sweetened puree: Mango ( chestnuts water Chinese 30 70 20 40 11 70 20 94 20 TARIC
CN code ex 2008 99 49 ex 2008 99 49 ex 2009 41 99 ex 2008 99 ex 2008 99 ex 2008 93 91 *ex 2009 41 92 *ex 2008 99 91 *ex 2008 99 48 ______
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 7
review mandatory End date for End date
31.12.2019 31.12.2019 31.12.2019 31.12.2016 31.12.2018 31.12.2016 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
)
1
)
1
, , Euterpe oleracea Ananas — frozen, sweetened, — not form, powder in — not — of a Brix value 23 but or more not more than 32, packings of a content 10 in immediate kg or more — with a Brix value of more than 20 but not more than 67, — than EUR 100 30 per weight, more kg net value of a sugar added — containing ( of products used of food or drink industry in the manufacture — of a Brix value 40 but or more not more than 66, — packings more or in immediate of a content 50 litres Passion fruit juice and passion fruit juice concentrate, whether or not frozen: — with a Brix value of 13,7 but not than or more more 55, weight, — 100 kg net 30 per EUR than more of value a of — packings more, and or in immediate of a content 50 litres sugar added — with ( of products of food or drink industry for the use in manufacture or more packing of a content 50 immediate litres — with a Brix value of more than 48 but not more than 67, — packings more or in immediate of a content 50 litres species the — of — of the genus the — of — of a Brix value 11 but or more not more than 16, ( of products used of drink industry in the manufacture Description Pineapple juice, other than in powder form: powder in than other juice, Pineapple concentrate: juice Cranberry concentrate: juice acerola concentrate: value of 61 more, but not more than 67, Brix in or with a concentrate Frozen boysenberry juice Frozen juice berry Acai 11 13 91 10 20 30 85 TARIC CN code ex 2009 89 73 ex 2009 81 31 ex 2009 89 73 ex 2009 89 79 ex 2009 89 79 ex 2009 89 79 ex 2009 49 30
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 8
review mandatory End date for End date
31.12.2019 31.12.2016 31.12.2018 31.12.2018 31.12.2016 31.12.2016 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
)
2 0 % 0
Passion fruit juice and passion fruit juice concentrate, whether or not frozen: — with a Brix value of 10 but or more not more than 13,7, weight, — 100 kg net 30 per EUR than more of value a of — packings more, and or in immediate of a content 50 litres sugar added — without ( of products of food or drink industry for the use in manufacture — unfermented, and sugar, or spirit added containing — not ( — packing or more in immediate of a content 50 litres form % in powder or textured % or more but not than 90 65 phosphate % of calcium than 8,6 extract, % licorice % but not more than 35 — than more 30 % tricaprylin, % but not more than 70 — than more 65 standardized by weight to 3 % or more but not more than 4 % glabridin Description water Coconut on dry weight basis, of a content by weight, calculated having a protein Soya concentrate protein weight: by but not more % or more containing on by the base of soya weight 6,6 Preparation protein isolate, containing Preparation % or more Fused magnesia with a purity by weight of 97 21 29 96 20 30 45 10 TARIC
CN code ex 2009 89 97 ex 2106 10 20 ex 2106 90 92 ex 2519 90 10 ex 2009 89 97 *ex 2106 10 20 *ex 2009 89 99 ______
M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 9
review mandatory End date for End date
31.12.2019 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2020 31.12.2017 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0 0 % 0 /s, or
/s with a viscosity index of 120 or more
2 2
)
1
18 or more but not than 50; and — a kinematic viscosity at 40 °C of more than 11 mm 11 than more of °C 40 at viscosity kinematic — a Mixture of xylenol-isomers and ethyl phenol-isomers, with a total xylenol and ethyl phenol-isomers, with a total Mixture of xylenol-isomers content by weight of % % or more but less than 95 62 described in Additional note 5 to undergo processes to feedstock one specific refinery of the ( Chapter 27 hydro hydrogenated, highly isoparaffinic of oil and dewaxed base hydroisomerized Catalytically carbons, containing: and by % or more weight of saturates, — 90 sulphur, of weight by % 0,03 than more — not with a viscosity index of 80 or more containing: (HPC), conversion process sulphur of mg/kg 1 than more — not of length chain carbon a with hydrocarbons % by hydrocarbons weight of saturated — iso-paraffinic than more 99 and n- of weight by % 75 than — more mm 6,5 than more of °C 40 at viscosity kinematic — a 80-9) Description Heavy and medium oils, whose aromatic content exceeds their non-aromatic content, for use as use for content, non-aromatic their exceeds paraffin content heavy aromatic a whose by oils, medium followed and hydrocarbons, Heavy gaseous from synthesised oil, base de-waxed Catalytic % (CAS RN 13494- than 99,999 more, but not more % or purity by a weight of 99,99 of Tellurium % or more by weight, in powder form (CAS RN or wire 7440-70-2) Calcium with a purity of 98 or more (CAS RN % 7439-93-2) of a purity by Lithium metal weight of 98,8 20 10 10 30 10 20 10 Phosphorus 10 20 TARIC
CN code 2804 70 00 2804 70 ex 2707 50 00 ex 2707 99 ex 2710 19 99 ex 2804 50 90 ex 2707 99 80 *ex 2710 19 81 *ex 2805 19 90 *ex 2710 19 99 *ex 2805 12 00 ______
M5 M4 ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 10
review mandatory End date for End date
31.12.2018 31.12.2020 31.12.2018 31.12.2016 31.12.2017 31.12.2018 31.12.2016 31.12.2019 31.12.2020 31.12.2018 31.12.2017 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
)
1 0 % 0
) 1 m μ
m μ m for use in the manufacture of use in m for the manufacture μ
m, and μ 0 % 0 0 % 0 0 % 0 0 % 0 m or more, but not more than 2,1 m or μ
)
1 — where 70 % of the particles have a diameter of not more than 3 have a diameter % of the particles — 70 where ingredient for production of additives used in poly(vinyl chloride) industry ( production used of additives ingredient for industry in poly(vinyl chloride) ( performance liquid chromatography columns (HPLC) and sample cartridges preparation ( cosmetic products 20 than more not of size particle a — with polyethylene of production the in used kind a — of powder of form the — in or more % — of a purity by weight of 99,7 0,7 of size grain median a — with Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more scandium metals, and yttrium, of a purity by weight of 95 Rare-earth Description Sulphamidic acid (CAS RN 5329-14-6) RN 10034-85-2) of cerium % or more containing by metals, weight 47 and rare-earth Alloy of cerium other (CAS RN acid (CAS Sulphamidic iodide Hydrogen Phosphorous acid (CAS RN powder 10294-56-1)/phosphonic acid (CAS RN 13598-36-2) used as an dioxide Silicon dioxide (CAS RN 7631-86-9) in the form of powder, for use of high in the manufacture silicon 60676-86-0), amorphous Balls of porous of size more white a than silica particle 1 RN Calcined (CAS dioxide silicon Amorphous 7783-54-2) RN 17194-00-2) (CAS RN trifluoride (CAS Nitrogen hydroxide Barium 10 10 20 30 10 30 60 70 10 10 TARIC CN code 2805 30 30 2805 30 2805 30 40 2805 30 *2805 30 20 *2805 30 ex 2811 22 00 ex 2812 90 00 ex 2811 19 80 ex 2811 19 80 ex 2811 19 80 ex 2811 22 00 ex 2811 22 00 ex 2816 40 00 ex 2805 30 10 *ex 2811 22 00
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 11
review mandatory End date for End date
31.12.2020 31.12.2019 31.12.2018 31.12.2020 31.12.2016 31.12.2017 Unit Supplementary - - - - -
- duty 0 % 0 % 0 % Rate of autonomous
m μ 0 % 0 0 % 0 )
1 /g
2 4%
m) m or more but not more than 2,1 but not more more m or μ μ m (± 1 m (± μ O-content by weight of not more than 0,06 % O-content by weight of not more than 0,06
2 and — with a Total-Na a — with 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, of aluminates earth rare 12068-51-8) and the RN (CAS aluminate 1344-28-1), magnesium of: oxides) as (calculated weight by content a neodymium, lanthanum, and with of aluminium oxide, % % or more, but less than 98,5 — 94 %) of magnesium oxide, 1,5 % (± — 2 oxide, %) of yttrium 0,6 % (± — 1 or oxide, lanthanum of %) 1,2 (± % 2 — either %) of lanthanum oxide and neodymium oxide, 1,2 % (± — 2 of more than 10 mm size weight having a particle % of the total with less than 50 powder of form the — in or more % — with a purity by weight of 99,5 — with a decomposition point of 263o C or more 4 of size particle a — with or more, % — of a purity by weight of 99,9 0,7 of grain-size average an — with Description Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN (CAS oxide aluminium of consisting structure, crystalline micro a with corundum Sintered pseudo-boehmite of form the in oxide 21645-51-2) hydroxide 350 of at least m area surface alumina with a specific Activated RN Aluminium (CAS hydroxide Aluminium 13463-67-7): RN (CAS dioxide ( (CAS RN 1308-38-9) metallurgy use in for Dichromium trioxide Titanium 20 10 10 20 10 10 TARIC CN code ex 2818 30 00 ex 2819 90 ex 2818 20 00 ex 2818 30 00 ex 2823 00 *ex 2818 10 91
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 12
review mandatory End date for End date
31.12.2017 31.12.2017 31.12.2018 31.12.2020 31.12.2017 31.12.2020 31.12.2016 31.12.2018 31.12.2016 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
)
1
elemental potassium), — sodium potassium and and % of sodium as elemental combined (expressed than 0,005 not more of phosphorus phosphorus), % as elemental (expressed — not more than 0,01 ( for use in the metallurgy chloride 7758-89-6) Description Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm 100 than more not of size particle 5470-11-1) a RN % or more and Titanium dioxide (CAS RN containing by 13463-67-7) weight: with a purity of 99,7 with (CAS 1317-38-0), chloride RN Hydroxylammonium (CAS oxide % of or more of copper and than 0,03 % not more oxide containing by weight 78 or II) Copper (I 1314-23-4) (II) RN Copper (CAS 21324-40-3) dioxide RN Zirconium (CAS 10326-27-9) hexafluorophosphate % or more (CAS RN 7783-82-6) Tungsten hexafluoride with a purity by 99,9 weight of RN Lithium (CAS dihydrate % (CAS RN than 99 but not more more % or Copper purity by 96 monochloride of a weight of 7681-82-5) chloride RN 10034-96-5) or more (CAS RN % 7647-18-9) Antimony purity by of a weight of 99 pentachloride Barium (CAS RN iodide (CAS Hydrated zirconium dichloride oxide Sodium monohydrate sulphate % or less of sodium on calculated the dry weight Disodium containing by tetrasulphide, weight 38 Manganese 20 10 20 30 10 10 15 10 20 40 10 10 10 20 TARIC CN code ex 2825 50 00 ex 2825 60 00 ex 2825 10 00 ex 2825 50 00 ex 2826 90 80 ex 2827 39 85 ex 2827 39 85 ex 2827 39 85 ex 2827 49 90 ex 2827 60 00 ex 2830 10 00 ex 2833 29 80 ex 2823 00 *ex 2826 19 90
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 13
review mandatory End date for End date
31.12.2020 31.12.2017 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2016 31.12.2017 31.12.2017 Unit Supplementary ------
duty 0 % 0 % Rate of autonomous
0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0
cated: arsenic, of more or mg/kg — 2 — 200 mg/kg of calcium, or more — 200 mg/kg of chlorides, or more — 20 mg/kg of iron, or more — 150 mg/kg of magnesium, or more — 20 mg/kg of heavy or more metals, — 300 mg/kg of potassium, or more — 300 mg/kg of sodium, or more — 200 mg/kg of sulphates, or more in the European according to the methods Pharmacopœia specified determined % or more 96 Description Zirconium sulphate (CAS RN 14644-61-2) 10039-56-2) RN RN (CAS (CAS 7681-53-0) sulphate monohydrate RN Zirconium hypophosphite (CAS Sodium hypophosphite Sodium Lithium carbonate, containing one at the concentrations indi or more of the following impurities 25869-00-5) 544-92-3) 13601-19-9) RN RN RN (CAS (CAS (CAS RN 57219-64-4 basic carbonate (IV) Zirconium or 37356-18-6) with a purity by weight of (CAS (II) cyanide (II) hexacyanoferrate 13870-28-5) Copper hexacyanoferrate (III) RN Tetrasodium iron (CAS Ammonium disilicate Disodium 30 10 20 20 30 20 10 20 10 TARIC
CN code ex 2837 19 00 ex 2835 10 00 ex 2835 10 00 ex 2836 91 00 ex 2837 20 00 ex 2837 20 00 ex 2839 19 00 *ex 2836 99 17 *ex 2833 29 80 ______
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 14
review mandatory End date for End date
31.12.2018 31.12.2020 31.12.2018 31.12.2018 31.12.2019 31.12.2019 31.12.2017 31.12.2017 31.12.2018 31.12.2018 31.12.2019 31.12.2019 31.12.2016 31.12.2018 31.12.2018 31.12.2016 Unit Supplementary ------
duty 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
)
1
0 % 0 )
Euratom 0 % 0 ) (CAS RN 7789-20-0) 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 Euratom 0 % 0
12054-85-2) ( metal content, for the manufacture of silver oxide batteries mixtures and solutions containing these products ( Description Lithium cobalt(III) oxide with a cobalt content of at least 59 % (CAS RN 12190-79-3) 1344-95-2) RN RN RN (CAS 12767-90-7) (CAS (CAS % RN tetrahydrate silicate (CAS 59 as 13106-76-8) Calcium borate least or RN 12207-64-6) Zinc at 12027-67-7) (CAS RN 11120-25-5) of RN tetraoxomolybdate(2-) (CAS RN content (CAS Diammonium tridecaoxotetramolybdate(2-) (CAS cobalt anhydrous Diammonium paratungstate) a heptamolybdate, (ammonium Hexaammonium with wolframate oxide Diammonium cobalt(III) powder Lithium Zeolite powder 13410-01-0) Beta zeolite RN % or more (CAS RN 12056-51-8) oxide Potassium titanium in powder form with a purity of 99 Synthetic chabasite (CAS Synthetic selenate Sodium % by weight of the 99,99 content of at least with a silver and carbonate-free, Silver oxide, nitrate- 14762-55-1) RN (CAS Helium-3 Sodium dichromate (CAS RN 10588-01-9) RN (CAS dichromate 20 10 Sodium 10 ( 20 30 oxide) 10 10 20 (deuterium 10 20 water 10 10 Heavy 10 hydrogen deuterium; and compounds in and compounds enriched Deuterium thereof; thereof, TARIC CN code 2841 30 00 2841 30 00 2845 10 10 2845 90 ex 2841 70 00 ex 2841 70 00 ex 2841 70 00 ex 2841 80 00 ex 2841 90 85 ex 2841 90 85 ex 2842 10 00 ex 2842 10 00 ex 2842 90 10 ex 2843 29 00 ex 2845 90 ex 2839 90 00 *ex 2840 20 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 15
review mandatory End date for End date
31.12.2018 31.12.2016 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2017 31.12.2016 31.12.2017 Unit Supplementary ------
duty 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0
)
1 0 % 0
0 % 0
0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 C)Carbon monoxide (CAS RN 1641-69-6)
13 Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth % or more but not more than 95 containing by concentrate weight 60 Rare-earth % each of zirconium oxide, aluminium oxide or iron oxide, and having oxides and not than more 1 % or more by weight a loss on ignition of 5 % or more, and — a purity by weight of 98 iron 10ppm than more — not ( polymer articles of oxygen for use as an additive in manufacture the barrier Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of of scandium of mixtures or or of yttrium Compounds, metals, inorganic or organic, of rare-earth 00 10 other than those of subheading these metals, 2846 Description Iron boride enriched at a level of more than 95 % by weight with boron-10 (CAS RN 200513-39-9) RN (CAS boron-10 with weight by % 95 than more of level 537-01-9) a RN at (CAS enriched % or by more weight with oxygen-18 (CAS RN 14314-42-2) Water enriched at a level of 95 hydrated ( hydrated boride not not Iron or or whether whether tricarbonate, carbonate, Dicerium lanthanum Cerium 7803-51-2) RN 7803-62-5) (CAS RN 7784-42-1) Phosphine (CAS RN 7782-65-2) Silane (CAS RN with: Arsine (CAS 16940-66-2) tetrahydride (CAS of not than 250 more size nm (CAS RN with a particle 25583-20-4) Titanium nitride Germanium tetrahydroborate Sodium 10 53 20 30 40 20 30 10 10 20 30 40 50 TARIC CN code 2846 90 20 2846 90 30 2846 90 2846 90 90 2846 90 *2846 90 10 *2846 90 ex 2846 10 00 ex 2845 90 ex 2845 90 ex 3824 90 96 ex 2846 10 00 ex 2846 10 00 ex 2848 00 ex 2850 00 20 ex 2850 00 20 ex 2850 00 20 ex 2850 00 20 ex 2850 00 20 ex 2845 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 16
review mandatory End date for End date
31.12.2018 31.12.2016 31.12.2018 31.12.2020 31.12.2019 31.12.2018 31.12.2019 Unit Supplementary ------
duty 0 % 0 % Rate of autonomous
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
more than: bromide Sec-butyl of % — 0,25 bromide n-butyl of % — 0,06 bromide n-propyl of % — 0,06 following specification: (1,1,2,2-tetrafluoroethane), R134 of weight by ppm 600 than more — not (1,1,1-trifluoroethane), R143a of weight by ppm 5 than more — not (pentafluoroethane), R125 of weight by ppm 2 than more — not (1-chloro-1,2,2,2-tetrafluoroethane), R124 of weight by ppm 100 than more — not — than 30 ppm R114 not more by weight of (1,2-dichlorotetrafluoroethane), — than 50 ppm R114a not more by weight of (1,1-Dichlorotetrafluoroethane), (1-Chloro-2,2,2-Trifluoroethane), R133a of weight by ppm 250 than more — not (Chlorodifluoromethane), R22 of weight by ppm 2 than more — not (Chloropentafluoroethane), R115 of weight by ppm 2 than more — not (Dichlorodifluoromethane), R12 of weight by ppm 2 than more — not — than 20 ppm R40 chloride), not more by weight of (Methyl — than 20 ppm R245cb not more by weight of (1,1,1,2,2-pentafluoropropane), — than 20 ppm R12B1 not more by weight of (Chlorodifluorobromomethane), — than 20 ppm R32 not more by weight of (Difluoromethane), — than 15 ppm R31 not more by weight of (Chlorofluoromethane), Description 1-Bromo-2-methylpropane (CAS RN 78-77-3) with a purity not less than 99,0 % and containing not containing and % 99,0 than less not 26628-22-8) purity RN a 1189-71-5) (CAS with RN azide (CAS 78-77-3) Sodium isocyanate RN Chlorosulphonyl (CAS 1-Bromo-2-methylpropane the to 354-33-6) conforming RN 75-37-6) production (CAS grade RN pharmaceutical Pentafluoroethane (CAS for 1,1-Difluoroethane feedstock 1,1,1,2-Tetrafluoroethane Difluoromethane (CAS RN 75-10-5) RN 10 10 10 (CAS Difluoromethane 10 10 10 TARIC CN code *2903 39 21 *2903 39 ex 2853 00 90 ex 2903 39 19 ex 2850 00 60 *ex 2903 39 24 *ex 2903 39 25 *ex 2903 39 26
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 17
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2017 Unit Supplementary - - - - -
duty Rate of autonomous
)
1 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 Chloro-1,2-Difluoroethylene+3,3,3-Trifluoropropene), — than 10 ppm R152a not more by weight of (1,1-Difluoroethane), — than 20 ppm 1131 not more by weight of Fluoroethylene), (1-Chloro-2 — than 20 ppm 1122 not more by weight of (1-Chloro-2,2-Difluoroethylene), (2,3,3,3-Tetrafluoropropene), 1234yf of weight by ppm 3 than more — not Trifluoropropene), (3,3,3 1243zf of weight by ppm 3 than more — not (1-chloro-1,2-difluoroethylene), 1122a of weight by ppm 3 than more — not 1234yf+1122a+1243zf of +1- by weight 4,5 ppm than (2,3,3,3-tetrafluoropropene, more — not chemical, unspecified/unknown individual any of weight by ppm 3 than more — not — combined, unspecified/unknown than 10 ppm all not more by weight of chemicals — than 10 ppm Water, not more by weight of weight, by ppm 0,1 than more not of level acidity an — with Halides, — without Boilers, High of volume by % 0,01 than more — not malodour) (no odour any — without for further purification to an inhalation grade of HFC 134a produced under GMP (Good Manu aerosols whose use of a propellant for medical contents in the manufacture for Practice) facturing ( (CAS are taken into RN tract the oral or nasal cavities, and/or the respiratory 811-97-2) Description Carbon tetrafluoride (tetrafluoromethane) (CAS RN 75-73-0) 460-73-1) RN RN (CAS (CAS (tetrafluoromethane) 76-16-4) 1,1,1,3,3-Pentafluoropropane tetrafluoride RN Carbon (CAS Perfluoroethane 355-37-3) RN (CAS 1H-Perfluorohexane 2,3,3,3-Tetrafluoroprop-1-ene (2,3,3,3-tetrafluoropropene) (CAS RN 754-12-1) RN 10 10 (CAS 20 (2,3,3,3-tetrafluoropropene) 10 2,3,3,3-Tetrafluoroprop-1-ene TARIC
CN code *2903 39 31 *2903 39 *ex 2903 39 27 *ex 2903 39 29 *ex 2903 39 28 *ex 2903 39 28 ______
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 18
review mandatory End date for End date
31.12.2018 31.12.2016 31.12.2018 31.12.2016 31.12.2020 31.12.2018 31.12.2016 31.12.2019 31.12.2018 31.12.2016 31.12.2016 31.12.2017 31.12.2020 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 1,3,3,3-tetrafluoropropene) (CAS RN 1645-83-6) 0 % 0 0 % 0 Trans-
1,3,3,3-tetrafluoroprop-1-ene ( 1,3,3,3-tetrafluoroprop-1-ene 102687-65-0) RN (CAS 1-chloro-3,3,3-trifluoropropene diene (CAS RN 13560-89-9) — 0,001 mg/kg of tetrachlorodibenzodioxines, or less — 0,001 mg/kg of tetrachlorodibenzofurans, or less — 0,2 mg/kg or less of tetrachlorobiphenyls Description Perfluoro(4-methyl-2-pentene) (CAS RN 84650-68-0) 19430-93-4) RN RN Trans- (CAS (CAS 116-15-4) Perfluoro(4-methyl-2-pentene) ethylene RN 338-65-8) (Perfluorobutyl) (CAS RN 354-58-5) Hexafluoropropene (CAS RN 79-38-9) 2-Chloro-1,1-difluoroethane (CAS RN 1,1,1-Trichlorotrifluoroethane (CAS Chlorotrifluoroethylene [12.2.1.16,9.02,13.05,10]octadeca-7,15- Trans- 559-40-0) -Dodecachloropentacyclo RN 1,6,7,8,9,14,15,16,17,17,18,18 (CAS 930-28-9) Octafluorocyclopentene RN 60811-21-4) Hexabromocyclododecane (CAS RN 84852-53-9) Chlorocyclopentane (CAS RN 4-Bromo-2-chloro-1-fluorobenzene (CAS 1,2-Bis(pentabromophenyl)ethane % or more and containing: 2,6-Dichlorotoluene, a purity by of weight of 99 10 10 20 30 10 10 10 10 10 30 40 50 15 20 40 TARIC CN code ex 2903 77 90 ex 2903 89 90 ex 2903 89 90 ex 2903 89 90 ex 2903 89 90 ex 2903 99 90 ex 2903 99 90 *ex 2903 39 35 *ex 2903 39 *ex 2903 39 *ex 2903 39 *ex 2903 74 00 *ex 2903 77 60 *ex 2903 79 30 *ex 2903 99 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 19
review mandatory End date for End date
31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2019 31.12.2019 31.12.2020 31.12.2020 31.12.2020 31.12.2019 31.12.2019 31.12.2019 31.12.2020 31.12.2019 31.12.2020 31.12.2017 31.12.2018 31.12.2019 Unit Supplementary ------
duty Rate of autonomous 0 % 0 )
1 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -disulfonic acid (CAS RN 128-42-7) ′ styrenesulphonate (CAS RN 2695-37-6) styrenesulphonate (CAS p- -Dinitrostilbene-2,2 ′ Description Fluorobenzene (CAS RN 462-06-6) RN 98-15-7) ( (CAS RN 138526-69-9) 76-06-2) Fluorobenzene (CAS RN 1133-80-8) RN 3-Chloro-alpha,alpha,alpha-trifluorotoluene (CAS RN (CAS 1561-92-8) 1-Bromo-3,4,5-trifluorobenzene (CAS 92 RN 2-Bromo-9H-fluorene 3808 (CAS 75-52-5) Sodium subheading 2-methylprop-2-ene-1-sulphonate RN 79-24-3) of Sodium (CAS RN 108-03-2) goods Nitromethane (CAS RN 79-46-9) of Nitroethane (CAS RN manufacture 1-Nitropropane (CAS the 97-00-7) 1512-30-7) 2-Nitropropane for RN RN 98-59-9) Trichloronitromethane, (CAS (CAS RN 1-Chloro-2,4-dinitrobenzene chloride (CAS 350-46-9) 98-60-2) Difluoromethanesulphonyl chloride RN RN 594-44-5) Tosyl (CAS (CAS RN 1-Fluoro-4-nitrobenzene chloride (CAS 4-Chlorobenzenesulphonyl chloride Ethanesulphonyl 4,4 50 75 80 85 30 50 10 20 30 40 10 20 25 30 35 40 50 60 TARIC CN code ex 2903 99 90 ex 2903 99 90 ex 2903 99 90 ex 2904 10 00 ex 2904 10 00 ex 2904 20 00 ex 2904 90 40 ex 2904 90 95 ex 2904 90 95 ex 2904 90 95 ex 2904 90 95 ex 2904 90 95 ex 2903 99 90 *ex 2904 20 00 *ex 2904 20 00 *ex 2904 20 00 *ex 2904 90 95 *ex 2904 90 95
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 20
review mandatory End date for End date
31.12.2019 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2017 31.12.2017 31.12.2018 31.12.2019 31.12.2020 31.12.2016 31.12.2016 31.12.2017 31.12.2018 Unit Supplementary ------
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0
0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 butanolate (CAS RN of a solution in tetrahy form 865-47-4), whether or not in the tert-
drofuran according to note 1e) Chapter 29 of the CN 126-91-0) Description 1-Chloro-4-nitrobenzene (CAS RN 100-00-5) RN 88-73-3) (CAS RN 1-Chloro-4-nitrobenzene (CAS 1-Chloro-2-nitrobenzene RN162303-51-7) (CAS 1070-10-6) % by homopolymerweight or more Methanol (CAS RN 67-56-1) with a purity of 99,85 RN Potassium monohydrate, (CAS 108-82-7) Butyltitanate titanate RN 13254-34-7) 5593-70-4) Tetra-(2-ethylhexyl) (CAS RN RN 546-68-9) 2,6-Dimethylheptan-4-ol (CAS (CAS RN 3087-36-3) 2,6-Dimethylheptan-2-ol tetrabutanolate (CAS RN Titanium tetraisopropoxide (CAS Titanium tetraethanolate 504-63-2) Titanium RN 584-03-2) (CAS (CAS RN % or more of (3R)-(-)-Linalool RN Linalool (CAS RN 78-70-6) containing by weight 90,7 17913-76-7) Propane-1,3-diol (CAS RN 112-47-0) Butane-1,2-diol (CAS RN 78-26-2) 2,4,7,9-Tetramethyl-4,7-decanediol (CAS RN Decane-1,10-diol (CAS 2-Methyl-2-propylpropane-1,3-diol 70 80 10 11 20 25 30 40 70 80 85 10 10 20 30 40 50 TARIC CN code ex 2904 90 95 ex 2905 11 00 ex 2905 19 00 ex 2905 19 00 ex 2905 19 00 ex 2905 19 00 ex 2905 19 00 ex 2905 19 00 ex 2905 19 00 ex 2905 19 00 ex 2905 22 00 ex 2905 39 95 ex 2905 39 95 ex 2905 39 95 ex 2905 39 95 ex 2904 90 95 *ex 2905 39 95
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 21
review mandatory End date for End date
31.12.2020 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2017 31.12.2020 31.12.2019 31.12.2019 31.12.2016 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2019 Unit Supplementary ------
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 cresol (CAS RN 85-60-9) 0 % 0 m- 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
-butylidenedi- ′ butyl-4,4 -tert- Butylcyclohexanol (CAS RN 98-52-2) RN Butylcyclohexanol (CAS -Isopropylidenedicyclohexanol (CAS RN 80-04-6) RN (CAS -Isopropylidenedicyclohexanol -Di (CAS RN 129188-99-4) -(3,3,5-Trimethylcyclohexylidene)diphenol ′ ′ ′ Cresol (CAS RN 106-44-5) -tert- weight of 99 % or more weight of 99 Description Ethylidynetrimethanol (CAS RN 77-85-0) by RN 75-89-8) purity (CAS RN a Ethylidynetrimethanol (CAS 105-08-8) with 2,2,2-Trifluoroethanol RN 106-44-5) (CAS RN Cyclohex-1,4-ylenedimethanol 79538-03-7) (CAS 4,4 RN 60-12-8) para-cresol 4 (CAS RN and 1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene (CAS 946525-30-0) 108-39-4) 2-Phenylethanol RN RN (CAS (CAS 2-Bromo-5-iodo-benzenemethanol meta-cresol of 135-19-3) Mixture RN 576-26-1) p- (CAS RN 92-69-3) 2-Naphthol (CAS RN 2,6-Xylenol (CAS Biphenyl-4-ol 623-05-2) RN Resorcinol (CAS RN 108-46-3) 6,6 (CAS 4,4 alcohol 4-Hydroxybenzyl Menthol (CAS RN 1490-04-6) RN (CAS 10 20 Menthol 10 20 50 20 30 40 20 30 10 10 20 10 15 20 25 TARIC CN code 2906 11 00 2906 11 ex 2906 29 00 ex 2907 12 00 ex 2905 59 98 ex 2906 19 00 ex 2906 19 00 ex 2906 19 00 ex 2906 29 00 ex 2906 29 00 ex 2907 12 00 ex 2907 15 90 ex 2907 19 10 ex 2907 19 90 ex 2907 21 00 ex 2907 29 00 ex 2907 29 00 ex 2907 29 00 *ex 2905 49 00
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 22
review mandatory End date for End date
31.12.2018 31.12.2016 31.12.2016 31.12.2016 31.12.2018 31.12.2017 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2020 31.12.2020 31.12.2018 31.12.2017 31.12.2018 31.12.2018 31.12.2016 Unit Supplementary ------
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 cresol (CAS RN 1709-70-2) 0 % 0 0 % 0 -p- 0 % 0
0 % 0 cresol) (CAS RN 111850-25-0) 0 % 0 m- 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -(mesitylene-2,4,6-triyl)tri cresol) (CAS RN 4066-02-8) α′ , -p- α′ , α -butane-1,1,3-triyltri( ′ ,4
′ butyl- -tert- -diol (CAS RN 1806-29-7) ′ -Hexa ′ ,6 ′ -Ethylidynetriphenol (CAS RN 27955-94-8) -Ethylidynetriphenol -Tricyclohexyl-4,4 ,6,6 ′ ′ ′ ,4 ,6 -Methylenebis(6-cyclohexyl ,2 (CAS RN 1478-61-1) -(Perfluoroisopropylidene)diphenol ′ ′ ′ ′ ′ weight of 99 % or more weight of 99 Description 4-[2-(4-Hydroxy-3-prop-2-enylphenyl)propan-2-yl]-2-prop-2-enylphenol (CAS RN 1745-89-7) RN 700-13-0) 4,4 (CAS RN 95-71-6) 4-[2-(4-Hydroxy-3-prop-2-enylphenyl)propan-2-yl]-2-prop-2-enylphenol (CAS RN 2,3,5-Trimethylhydroquinone (CAS 2-Methylhydroquinone 6,6 hydrated Biphenyl-2,2 not 2,2 or 771-61-9) 2,2 whether RN Phloroglucinol (CAS 106-48-9) Pentafluorophenol RN 4,4 (CAS 99627-05-1) 4-Chlorophenol RN 371-41-5) (CAS RN 3,4,5-Trifluorophenol (CAS 100-02-7) 148-25-4) 4-Fluorophenol RN 111-44-4) RN (CAS RN (CAS 4-Nitrophenol (CAS acid ether 4,5-Dihydroxynaphthalene-2,7-disulphonic 297730-93-9) Bis(2-chloroethyl) RN (CAS Mixture of isomers nonafluorobutyl methyl ether or nonafluorobutyl of a purity by ethyl ether, 3-Ethoxy-perfluoro-2-methylhexane 30 35 40 45 50 55 65 70 85 10 20 30 40 50 30 40 20 30 50 TARIC CN code ex 2908 19 00 ex 2908 99 00 ex 2907 29 00 ex 2907 29 00 ex 2907 29 00 ex 2907 29 00 ex 2907 29 00 ex 2907 29 00 ex 2907 29 00 ex 2907 29 00 ex 2908 19 00 ex 2908 19 00 ex 2908 19 00 ex 2908 19 00 ex 2908 99 00 ex 2909 19 90 ex 2909 19 90 ex 2909 19 90 ex 2907 29 00
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 23
review mandatory End date for End date
31.12.2018 31.12.2016 31.12.2018 31.12.2016 31.12.2020 31.12.2019 31.12.2019 31.12.2020 31.12.2020 31.12.2020 31.12.2020 31.12.2020 31.12.2018 31.12.2020 31.12.2019 31.12.2018 31.12.2016 31.12.2019 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 butyl-4-hydroxyanisole, mixed isomers (CAS RN 25013- butyl-4-hydroxyanisole, mixed isomers -tert- 0 % 0 butylperoxyisopropyl)benzene (CAS RN 25155-25-3)butylperoxyisopropyl)benzene (CAS
-tert- -dimethylbenzyl) peroxide (CAS RN 80-43-3) Butyl-4-hydroxyanisole and 3 α ,
α -Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene] (CAS RN 21850-44-2) (CAS RN -(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene ′ ′ -tert- 97416-84-7) 16-5) hydrocarbons Description 1-Methoxyheptafluoropropane (CAS RN 375-03-1) 1163-19-5) 19870-74-7) RN RN RN (CAS (CAS (CAS 1-Methoxyheptafluoropropane ether 8-Methoxycedrane Bis(pentabromophenyl) 613-62-7) 1,1 54914-85-1) RN 1,1 6443-69-2) RN (CAS 2100-42-7) RN (CAS 2-(Phenylmethoxy)naphthalene RN (CAS 1,2-Bis(3-methyl-phenoxy)ethane 121219-07-6) (CAS 3,4,5-Trimethoxytoluene 136239-66-2) RN 1-Chloro-2,5-dimethoxybenzene 1569-01-3) RN (CAS RN (CAS 1-Ethoxy-2,3-difluorobenzene 56718-71-9) (CAS 1-Butoxy-2,3-difluorobenzene 992-78-9) RN 1-Propoxypropan-2-ol RN (CAS isoparaffinic (CAS 4-(2-Methoxyethyl)phenol in Ubiquinol dissolved 2 24748-23-0), RN Bis( 286-20-4) (CAS 1,4-Di(2 RN 3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane (CAS 1,2-Epoxycyclohexane 60 10 10 20 30 10 20 30 40 50 60 10 10 20 30 10 20 30 15 TARIC CN code ex 2909 30 90 ex 2909 50 00 ex 2909 20 00 ex 2909 30 38 ex 2909 30 38 ex 2909 30 90 ex 2909 30 90 ex 2909 30 90 ex 2909 49 80 ex 2909 50 00 ex 2909 60 00 ex 2909 60 00 ex 2909 60 00 ex 2910 90 00 ex 2909 19 90 *ex 2909 30 38 *ex 2909 30 90 *ex 2909 30 90 *ex 2909 50 00
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 24
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2020 31.12.2016 31.12.2020 31.12.2016 31.12.2017 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2017 31.12.2020 31.12.2020 31.12.2017 31.12.2017 31.12.2017 31.12.2018 Unit Supplementary ------
duty 0 % Rate of autonomous 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
anisaldehyde (CAS RN 621-59-0) -p- Butylbenzaldehyde (CAS RN 939-97-9) RN Butylbenzaldehyde (CAS -tert- cahexaenal (CAS RN 1638-05-7) Description 2-[(2-Methoxyphenoxy)methyl]oxirane (CAS RN 2210-74-4) 556-52-5) 122-60-1) RN RN RN 106-92-3) (CAS (CAS (CAS RN 2-[(2-Methoxyphenoxy)methyl]oxirane (glycidol) ether (CAS 2,3-Epoxypropan-1-ol phenyl ether 2,3-Epoxypropyl glycidyl 148992-43-2) Allyl RN (CAS Ethoxy-2,2-difluoroethanol 40150-98-9) RN 5973-71-7) (2E,4E,6E,8E,10E,12E)-2,7,11-Trimethyl-13-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8,10,12-tride (CAS RN 4-Isobutylbenzaldehyde (CAS 122-03-2) 3,4-Dimethylbenzaldehyde RN 39515-51-0) 4 (CAS RN 123-08-0) 4-Isopropylbenzaldehyde (CAS RN 90-02-8) 3-Phenoxybenzaldehyde (CAS RN 4-Hydroxybenzaldehyde (CAS Salicylaldehyde 563-80-4) 3-Hydroxy RN 107-87-9) (CAS RN 3100-36–5) Heptan-2-one (CAS RN 110-43-0) 3-Methylbutanone (CAS RN Pentan-2-one (CAS Cyclohexadec-8-enone 20 30 50 80 10 40 50 60 70 80 10 20 30 40 20 30 40 20 TARIC CN code ex 2911 00 ex 2912 29 00 ex 2910 90 00 ex 2910 90 00 ex 2912 29 00 ex 2912 29 00 ex 2912 29 00 ex 2912 29 00 ex 2912 49 00 ex 2912 49 00 ex 2914 19 90 ex 2914 19 90 ex 2914 19 90 ex 2914 29 00 ex 2910 90 00 *ex 2910 90 00 *ex 2912 49 00 *ex 2912 49 00
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 25
review mandatory End date for End date
31.12.2020 31.12.2018 31.12.2016 31.12.2019 31.12.2019 31.12.2017 31.12.2018 31.12.2018 31.12.2017 31.12.2017 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2016 31.12.2017 31.12.2018 31.12.2017 Unit Supplementary ------
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % % 0 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
,8-dien-2-one (CAS RN 6485-40-1)
6
-Tetrahydroxybenzophenone (CAS RN 131-55-5) RN (CAS -Tetrahydroxybenzophenone ′ -Damascone (CAS RN 23726-91-2) Mentha-1 β ,4,4 -p- ′ -Methylacetophenone (CAS RN 122-00-9) RN -Methylacetophenone (CAS 121-71-1) RN -Hydroxyacetophenone (CAS 100-06-1) RN -Methoxyacetophenone (CAS 118-93-4) RN -Hydroxyacetophenone (CAS ′ ′ ′ ′ Description (R) 66309-83-9) Camphor RN 120-46-7) trans- (CAS RN 119-61-9) 2,6-Dimethyl-1-indanone (CAS RN 2128-93-0) 1,3-Diphenylpropane-1,3-dione (CAS RN 134-84-9) Benzophenone (CAS RN 134-81-6) 4-Phenylbenzophenone (CAS RN 4-Methylbenzophenone (CAS Benzil 4 3 42523-29-5) 4 RN 5471-51-2) 2 (CAS RN 10425-11-3) 2,7-Dihydroxy-9-fluorenone (CAS RN 4-(4-Hydroxyphenyl)butan-2-one (CAS 24650-42-8) 3,4-Dihydroxybenzophenone RN 2,2 (CAS 2,2-Dimethoxy-2-phenylacetophenone 30 40 50 15 25 30 50 60 70 80 20 25 30 36 40 45 55 60 TARIC CN code ex 2914 29 00 ex 2914 29 00 ex 2914 39 00 ex 2914 39 00 ex 2914 39 00 ex 2914 39 00 ex 2914 39 00 ex 2914 39 00 ex 2914 39 00 ex 2914 50 00 ex 2914 50 00 ex 2914 50 00 ex 2914 50 00 ex 2914 50 00 ex 2914 50 00 ex 2914 50 00 *ex 2914 29 00 *ex 2914 50 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 26
review mandatory End date for End date
31.12.2020 31.12.2017 31.12.2020 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2016 31.12.2019 31.12.2020 31.12.2017 31.12.2020 31.12.2018 31.12.2018 31.12.2020 31.12.2016 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 -dinitroacetophenone (CAS RN 81-14-1) ′ ,5 ′ -hydroxypregn-5-en-20-one (CAS RN 974-23-2) -hydroxypregn-5-en-20-one (CAS β -dimethyl-3 ′ ,6 ′ benzoquinone (CAS RN 118-75-2) RN benzoquinone (CAS -hydroxybenzophenone (CAS RN 42019-78-3) -hydroxybenzophenoneRN (CAS -p- ′ -Epoxy-3 α Butyl-2 -Dihydroxyacetophenone (CAS RN 699-83-2) RN -Dihydroxyacetophenone (CAS ,17 ′ 342-25-6) RN -Difluorobenzophenone (CAS ′ tert- α ,6 34841-35-5) RN -Chloropropiophenone (CAS - ′ ′ ′ propyl)anthraquinone (CAS RN 32588-54-8) RN propyl)anthraquinone (CAS Description 3-Methoxyacetophenone (CAS RN 586-37-8) RN (CAS 3-Methoxyacetophenone 22009-38-7) 16 RN (CAS 2-(1,1-dimethyl 7-Hydroxy-3,4-dihydro-1(2H)-naphthalenone 84-51-5) and RN 13936-21-5) 68892-28-4) 2 (CAS RN RN 81-64-1) 2-Ethylanthraquinone (CAS RN (CAS 106-51-4) 2-Pentylanthraquinone (CAS 2-(1,2-dimethylpropyl)anthraquinone RN 1,4-Dihydroxyanthraquinone (CAS of 720-94-5) p-Benzoquinone mass RN Reaction (CAS 1378387-81-5) 1-(4-Methylphenyl)-4,4,4-trifluorobutane-1,3-dione RN 756-13-8) 2,4 (CAS RN 1-(7-Bromo-9,9-difluoro-9H-fluoren-2-yl)-2-chloroethanone (CAS Perfluoro(2-methylpentan-3-one) 3 6923-52-0) 4 RN 4-Chloro-4 (CAS Tetrachloro triacetate Antimony 65 70 75 80 10 20 30 40 50 15 20 25 40 50 60 70 80 10 TARIC CN code ex 2914 50 00 ex 2914 50 00 ex 2914 50 00 ex 2914 69 90 ex 2914 69 90 ex 2914 69 90 ex 2914 69 90 ex 2914 69 90 ex 2914 70 00 ex 2914 70 00 ex 2914 70 00 ex 2914 70 00 ex 2914 70 00 ex 2915 29 00 *ex 2914 50 00 *ex 2914 70 00 *ex 2914 70 00 *ex 2914 70 00
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 27
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2019 31.12.2020 31.12.2020 31.12.2020 31.12.2016 31.12.2016 31.12.2018 31.12.2017 31.12.2017 31.12.2019 31.12.2019 31.12.2018 31.12.2020 31.12.2020 31.12.2016 31.12.2017 Unit Supplementary ------
duty 0 % Rate of autonomous 0 % 0
0 % % 0 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % % 0 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 Butylcyclohexyl acetate (CAS RN 88-41-5) (CAS Butylcyclohexyl acetate
Butyl acetate (CAS RN 540-88-5) Butyl acetate -tert- 13-6) Description 2-Methylcyclohexyl acetate (CAS RN 5726-19-2) RN (CAS 2454-35-5) acetate RN 28079-04-1) 2-Methylcyclohexyl (CAS RN 54364-62-4) tert- acetate (CAS RN 16974-11-1) 3-Acetylphenyl acetate (CAS RN 125-12-2) Dodec-8-enyl acetate (CAS RN 93-92-5) Dodeca-7,9-dienyl acetate (CAS RN Dodec-9-enyl acetate (CAS 105-54-4) Isobornyl acetate RN 7065-46-5) 1-Phenylethyl (CAS RN 149-73-5) 2 butyrate (CAS RN 142-19-8) Ethyl chloride (CAS RN 122-51-0) 3,3-Dimethylbutyryl orthoformate (CAS RN Trimethyl heptanoate (CAS 1070-64-0) 19889-37-3) Allyl orthoformate RN RN Triethyl (CAS (CAS Ethyl-6,8-dichlorooctanoate acid butanoic 5856-77-9) 2-Ethyl-2-methyl RN (CAS chloride (CAS % or more RN 68457- Cobalt borate neodecanoate complexes, with a purity by weight of 92 2,2-Dimethylbutyryl 25 40 50 60 65 70 75 80 85 10 30 45 50 55 60 65 70 75 TARIC CN code ex 2915 90 70 ex 2915 90 70 ex 2915 39 00 ex 2915 39 00 ex 2915 39 00 ex 2915 39 00 ex 2915 39 00 ex 2915 60 19 ex 2915 90 70 ex 2915 90 70 ex 2915 90 70 ex 2915 90 70 ex 2915 90 70 ex 2915 39 00 *ex 2915 39 00 *ex 2915 39 00 *ex 2915 39 00 *ex 2915 90 70
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 28
review mandatory End date for End date
31.12.2016 31.12.2018 31.12.2018 31.12.2017 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2020 31.12.2016 31.12.2016 31.12.2019 31.12.2016 Unit Supplementary ------
duty 0 % 0 % 0 % Rate of autonomous
)
1 0 % 0 0 % 0 )
1 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 pentyl-2-hydroxyphenyl)ethyl]phenylacrylate (CAS RN 123968- -tert- butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate (CAS RN 61167- butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate -tert- pentyl-6-[1-(3,5-di -tert- Butyl-6-(3
-tert- 58-6) 25-2) containing at least: containing at alcohol (CAS RN % of Allyl 107-18-6), more but not than 0,02 % or more — 0,01 acid (CAS RN 79-41-4), and % of Methacrylic more but not than 0,1 % or more — 0,01 ( % of 4-Methoxyphenol (CAS RN 150-76-5) % or more but not than 1 — 0,5 Description Ethyl difluoroacetate (CAS RN 454-31-9) 13189-00-9) RN RN (CAS (CAS difluoroacetate powder 63451-47-8) 86273-46-3) Ethyl of RN RN 2 ( form (CAS (CAS 2,4-Di 106-91-2) 110-44-1) the powder acrylate 97-63-2) RN RN in methacrylate 2-(2-Vinyloxyethoxy)ethyl RN (CAS (CAS dimethacrylate, Hydroxyzinc (CAS feeds methacrylate Zinc methacrylate 2,3-Epoxypropyl animal Ethyl of manufacture the 63721-05-1) (CAS RN Allyl methacrylate 96-05-9) and isomers with % a its' or more purity and by weight of 98 in RN 2343-89-7) use (CAS 97-41-6) RN for 3,3-dimethylpent-4-enoate 701-97-3) RN (CAS acid Methyl 120-51-4) RN (CAS 2-fluoroacrylate Sorbic 1201-31-6) RN (CAS 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate Methyl 99-34-3) RN (CAS acid Ethyl 2516-96-3) RN (CAS benzoate 3-Cyclohexylpropionic RN (CAS acid Benzyl (CAS acid 2,3,4,5-Tetrafluorobenzoic acid 3,5-Dinitrobenzoic 2-Chloro-5-nitrobenzoic 80 10 40 70 10 20 10 20 30 20 40 50 50 60 10 10 13 15 TARIC CN code ex 2916 14 00 ex 2916 19 95 ex 2916 12 00 ex 2916 12 00 ex 2916 12 00 ex 2916 13 00 ex 2916 14 00 ex 2916 14 00 ex 2916 19 95 ex 2916 19 95 ex 2916 20 00 ex 2916 31 00 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2915 90 70 *ex 2916 13 00 *ex 2916 20 00
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 29
review mandatory End date for End date
31.12.2019 31.12.2018 31.12.2019 31.12.2016 31.12.2020 31.12.2018 31.12.2018 31.12.2020 31.12.2016 31.12.2018 31.12.2018 31.12.2020 31.12.2020 31.12.2017 31.12.2018 31.12.2020 Unit Supplementary ------
duty Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 butylbenzoate (CAS RN 26537-19-9) -tert- Butylbenzoic acid (CAS RN 98-73-7) (CAS Butylbenzoic acid -tert- Description 2,4-Dichlorophenylacetic acid (CAS RN 19719-28-9) RN (CAS 2905-62-6) acid RN 2,4-Dichlorophenylacetic 52629-46-6) (CAS 1017183-70-8) RN chloride 938-18-1) RN (CAS 3,5-Dichlorobenzoyl RN (CAS chloride 5773-80-8) (CAS chloride (2,4,6-Trimethylphenyl)acetyl RN chloride 2-Methyl-3-(4-Fluorophenyl)-propionyl 497181-19-8) (CAS 4 2,4,6-Trimethylbenzoyl RN acid Methyl 118-91-2) (CAS 6-Bromonaphthalene-2-carboxylic 1711-07-5) RN chloride 6613-44-1) RN (CAS 4-Bromo-2,6-difluorobenzoyl RN (CAS acid 161957-55-7) (CAS chloride 2-Chlorobenzoic RN chloride 3-Fluorobenzoyl 54811-38-0) (CAS 3,5-Dimethylbenzoyl RN acid 16331-45-6) (CAS 3-Chloro-2-fluorobenzoic RN acid 90-27-7) (CAS 5-Iodo-2-methylbenzoic RN chloride 4 (CAS 4-Ethylbenzoyl Acid 2-Phenylbutyric 18 20 23 25 30 35 38 41 45 48 50 51 53 55 60 61 TARIC
CN code ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 *ex 2916 39 90 *ex 2916 39 90 *ex 2916 39 90 *ex 2916 39 90 ______
M5 M4 M5 M4 M5 M4 M5 M4 ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 30
review mandatory End date for End date
31.12.2018 31.12.2017 31.12.2017 31.12.2018 31.12.2019 31.12.2019 31.12.2017 31.12.2018 31.12.2018 31.12.2019 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2020 31.12.2020 31.12.2020 31.12.2018 Unit Supplementary ------
duty Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 Toluic acid (CAS RN Toluic acid 99-04-7) Description Ibuprofen (INN) (CAS RN 15687-27-1) RN 209995-38-0) (CAS 18241-31-1) RN (INN) 814-89-1) RN (CAS Ibuprofen 108-59-8) RN (CAS acid m- 105-53-3) RN (CAS oxalate (2,4,5-Trifluorophenyl)acetic 762-42-5) RN (CAS oxalate Bis(p-methylbenzyl) 23386-52-9) RN (CAS malonate Cobalt 105-95-3) RN (CAS malonate Dimethyl 821-38-5) RN (CAS but-2-ynedioate Diethyl 97-65-4) RN (CAS 1,2-bis(cyclohexyloxycarbonyl)ethanesulphonate Dimethyl 115-27-5) RN (CAS brassylate Sodium 5333-84-6) RN (CAS acid Ethylene 131-17-9) RN (CAS acid Tetradecanedioic RN (CAS anhydride Itaconic 1962-75-0) (CAS anhydride 1,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic 81-84-5) RN phthalate 3-Methyl-1,2,3,6-tetrahydrophthalic RN (CAS Diallyl 89-32-7) (CAS Dibutyl-1,4-benzenedicarboxylate RN anhydride (CAS Naphthalene-1,8-dicarboxylic 35092-89-8) dianhydride 5292-45-5) RN Benzene-1,2:4,5-tetracarboxylic RN (CAS (CAS 1-Methyl-2-nitroterephthalate 2-nitroterephthalate Dimethyl 70 75 85 20 30 10 20 15 20 30 50 70 30 40 10 20 25 30 35 40 TARIC CN code ex 2917 39 95 ex 2917 39 95 ex 2917 39 95 ex 2916 39 90 ex 2916 39 90 ex 2917 11 00 ex 2917 11 00 ex 2917 19 10 ex 2917 19 10 ex 2917 20 00 ex 2917 20 00 ex 2917 34 00 ex 2916 39 90 *ex 2917 39 95 *ex 2917 19 80 *ex 2917 19 80 *ex 2917 19 80 *ex 2917 19 80 *ex 2917 19 80 *ex 2917 39 95
M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 31
review mandatory End date for End date
31.12.2019 31.12.2019 31.12.2020 31.12.2018 31.12.2019 31.12.2019 31.12.2018 31.12.2018 31.12.2017 31.12.2018 31.12.2016 31.12.2019 31.12.2018 31.12.2017 31.12.2019 31.12.2019 31.12.2018 31.12.2020 31.12.2017 Unit Supplementary ------
duty 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0
)
1 0 % 0 0 % 0 butyl-4-hydroxyphenyl)propionate] (CAS RN 35074-77-2) 0 % 0 0 % 0 0 % 0 -tert- -cholan-24-oic acid (deoxycholic acid) (CAS -cholan-24-oic acid (deoxycholic RN acid) 83-44-3) β
-Dihydroxy-5- α ,12-
α more than 96 % more than 96 ( (CAS RN 11116-97-5) gluconate lactate 35285-68-8, 99-76-3, 5026-62-0, 94-26-8, 94-13-3, 35285-69-9,120-47-8, 36457-20-2 4247-02- or 3) Description 1,2,4-Benzenetricarboxylic acid, 1,2,4-trioctyl ester (CAS RN 89-04-3) with a purity by weight of weight calcium by of purity manufacture a the with in 89-04-3) 52671-72-4) use RN RN for (CAS 128-69-8) (CAS 66905-23-5) ester RN acid-1,8-monoanhydride RN 1,2,4-trioctyl dianhydride(CAS 1,4,5,8-Naphthalenetetracarboxylic (CAS 81-25-4) acid, Perylene-3,4:9,10-tetracarboxylic monohydrate RN 1,2,4-Benzenetricarboxylic digluconate 97-67-6) (CAS Calcium RN acid 121-79-9) (CAS Cholic RN acid 3- (CAS acids L-Malic 3,4,5-trihydroxybenzoate Monohydroxynaphthoic 133-91-5) bis[3-(3,5-di Propyl RN Hexamethylene 141-97-9) 606-28-0) (CAS 123-76-2) RN RN acid Methyl-, ethyl-, propyl- or butyl of 4-hydroxybenzoic esters acid sodium or their salts (CAS RN 68592-12-1) RN (CAS (CAS 3,5-Diiodosalicylic 2386-87-0) RN (CAS acetoacetate Methyl-2-benzoylbenzoate RN (CAS acid Ethyl 24487-91-0) (CAS acid 4-Oxovaleric RN 3,4-epoxycyclohexanecarboxylate 2-[4-Chloro-3-(chlorosulphonyl)benzoyl]benzoic 77-83-8) (CAS 3,4-Epoxycyclohexylmethyl RN chloride (CAS 3-Methoxy-2-methylbenzoyl 2,3-epoxy-3-phenylbutyrate Ethyl 50 60 70 20 10 20 20 10 35 50 60 70 30 50 60 70 10 13 15 TARIC CN code ex 2918 99 90 ex 2918 99 90 ex 2917 39 95 ex 2918 16 00 ex 2918 19 30 ex 2918 19 30 ex 2918 19 98 ex 2918 29 00 ex 2918 29 00 ex 2918 29 00 ex 2918 29 00 ex 2918 29 00 ex 2918 30 00 ex 2918 30 00 ex 2918 30 00 ex 2918 30 00 ex 2918 99 90 ex 2917 39 95 *ex 2917 39 95
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 32
review mandatory End date for End date
31.12.2020 31.12.2019 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2019 31.12.2018 31.12.2019 31.12.2018 31.12.2019 31.12.2019 31.12.2019 31.12.2016 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2016 31.12.2018 31.12.2019 Unit Supplementary ------
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 butylphenyl)phosphate] (CAS RN 151841-65- 0 % 0 0 % 0 0 % 0 -tert- 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2) (CAS butylphenyl) phosphate, monosodium salt -methylenebis(4,6-di ′ -tert-
4-Hydroxy-3-methoxycinnamic acid (CAS RN 1135-24-6) 4-Hydroxy-3-methoxycinnamic acid -Methylenebis(4,6-di ′
Anisic acid (CAS RN Anisic acid 100-09-4) 908020-52-0) 5) Description Ethyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9) RN 5788-17-0) (CAS 117428-51-0) RN 2-hydroxy-2-(4-phenoxyphenyl)propanoate 96562-58-2) RN (CAS Ethyl RN (CAS 3-methoxyacrylate 52589-39-6) (CAS (E)-3-methoxy-2-(2-chloromethylphenyl)-2-propenoate Methyl RN 2-(4-hydroxyphenoxy)propionate Methyl 1916-07-0) (CAS Methyl RN RN acetate p- 118-41-2) 13832-70-7) (CAS (CAS dimethyl trans- RN RN salt 3,4,5-trimethoxybenzoate 4-Methylcatechol (CAS ammonium glycyrrhetinate(CAS Methyl acid difluoro[1,1,2,2-tetrafluoro-2-(pentafluoroethoxy)ethoxy]-, Stearyl 93-07-2) 67634-00-8) acid, 3,4,5-Trimethoxybenzoic 62476-59-9) RN RN Acetic RN (CAS (CAS (CAS acid Allyl-(3-methylbutoxy)acetate 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate 3,4-Dimethoxybenzoic Sodium 5945-33-5) 78-40-0) 2528-39-4) hydroxybis[2,2 2,2 % or more (CAS RN 95266-40-3) (ISO) Trinexapac-Ethyl with a purity by weight of 96 RN RN RN Aluminium (CAS (CAS (CAS 78-51-3) phosphate) phosphate Tri-n-hexylphosphate RN bis(diphenyl Triethyl (CAS Bisphenol-A Tris(2-butoxyethyl)phosphate 18 20 25 30 35 40 45 50 55 60 65 70 75 80 85 10 30 40 50 60 70 TARIC CN code ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2919 90 00 ex 2919 90 00 ex 2919 90 00 ex 2919 90 00 ex 2919 90 00 ex 2919 90 00 *ex 2918 99 90 *ex 2918 99 90
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 33
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2017 31.12.2018 31.12.2016 31.12.2018 31.12.2020 31.12.2020 31.12.2020 31.12.2018 31.12.2018 31.12.2020 Unit Supplementary ------
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 -diyl]bis(oxy)]bis[biphenyl-1,3,2- -diyl]bis(oxy)]bis[biphenyl-1,3,2- ′ 0 % 0 0 % 0 -disulphide (CAS RN 4090-51-1) ′
0 % 0 0 % 0 0 % 0 0 % 0 -biphenyl]-2,2 ′
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -Tetrakis(1,1-dimethylethyl)[1,1 ′ -oxydiethyl dicarbonate (CAS RN 142-22-3) -oxydiethyl dicarbonate butyl-5-nitrophenyl methyl carbonate (CAS RN 873055-55-1) butyl-5-nitrophenyl methyl carbonate ′ ,5,5 ′ butyl dicarbonate (CAS RN 24424-99-5) (CAS butyl dicarbonate -tert- -Dioctadecyl pentaerythritol bis(phosphite) (CAS -Dioctadecyl pentaerythritol RN 3806-34-6) ′ -Oxybis(5,5-dimethyl-1,3,2-dioxaphosphorinane)-2,2 -[[3,3 ′ ′ -tert- dioxaphosphepine], (CAS RN 138776-88-2) RN dioxaphosphepine], (CAS Description Fenitrothion (ISO) (CAS RN 122-14-5) RN 57018-04-9) (CAS RN (ISO) (CAS 64-67-5) Fenitrothion (ISO) RN Tolclofos-methyl (CAS 616-38-6) 2,2 sulphate RN Diethyl 2,2 (CAS Diallyl carbonate Dimethyl Di 2,4-Di 25586-42-9) RN O,O (CAS 154862-43-8) Tris(methylphenyl)phosphite RN (CAS 2,2 39148-24-8) diphosphite RN 201733-56-4) Bis(2,4-dicumylphenyl)pentaerythritol (CAS RN 73183-34-3) Fosetyl-aluminium (CAS RN Bis(neopentylglycolato)diboron (CAS Bis(pinacolato)diboron Trimethyl phosphite (CAS RN 121-45-9) 122-52-1) 10 RN 20 RN 30 (CAS 10 (CAS 20 40 phosphite 50 phosphite 60 Trimethyl Triethyl 10 20 30 40 50 60 80 TARIC CN code 2920 90 30 2920 90 40 2920 90 ex 2920 19 00 ex 2920 90 10 ex 2920 90 10 ex 2920 90 10 ex 2920 90 10 ex 2920 90 10 ex 2920 90 85 ex 2920 90 85 ex 2920 90 85 ex 2920 19 00 *ex 2920 19 00 *ex 2920 90 85 *ex 2920 90 85 *ex 2920 90 85 *ex 2920 90 85
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 34
review mandatory End date for End date
31.12.2019 31.12.2017 31.12.2018 31.12.2018 31.12.2018 31.12.2017 31.12.2019 31.12.2018 31.12.2018 31.12.2020 31.12.2016 31.12.2020 31.12.2017 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -dimethylpropane-1,3-diamine, (CAS RN 6711-48-4) RN (CAS -dimethylpropane-1,3-diamine, 0 % 0 N,N
-Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9) chloride -Diethylamino)ethyl -Dimethyloctylamine – boron trichloride (1:1) (CAS RN 34762-90-8) N,N -[3-(Dimethylamino)propyl]- ′ Diethylamino-triethoxysilane (CAS RN 35077-00-0) Diethylamino-triethoxysilane 112926-00-8) Description Ethyl(2-methylallyl)amine (CAS RN 18328-90-0) 175923-04-3) RN 107-11-9) RN 2-( (CAS RN (CAS Ethyl(2-methylallyl)amine (CAS (IV), Allylamine zirconium Tetrakis(ethylmethylamino) 33329-35-0) N,N RN 3855-32-1) (CAS agent silicon dioxide % addition (CAS RN of anti-caking RN Taurine (CAS RN 107-35-7), with 0,5 646-25-3) Tris[3-(dimethylamino)propyl]amine (CAS RN Bis[3-(dimethylamino)propyl]methylamine (CAS 2579-20-6) Decamethylenediamine RN 765-30-0) 616-84-2) N (CAS RN RN 24605-36-5) 1,3-Cyclohexanedimethanamine (CAS (CAS 108-42-9) RN Cyclopropylamin acid RN (CAS 4-Amino-3-nitrobenzenesulphonic (CAS 2-aminobenzene-1,4-disulphonate 100-01-6) 3-Chloroaniline hydrogen RN Sodium (CAS 4-Nitroaniline 10 20 10 20 30 60 70 80 20 30 40 50 30 40 15 20 25 30 TARIC CN code ex 2921 19 50 ex 2921 19 60 ex 2921 19 99 ex 2921 19 99 ex 2921 19 99 ex 2921 19 99 ex 2921 19 99 ex 2921 29 00 ex 2921 29 00 ex 2921 29 00 ex 2921 30 99 ex 2921 42 00 ex 2921 42 00 ex 2921 42 00 ex 2921 42 00 ex 2929 90 00 *ex 2921 29 00 *ex 2921 30 99
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 35
review mandatory End date for End date
31.12.2020 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2016 31.12.2018 31.12.2017 31.12.2017 31.12.2017 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2020 Unit Supplementary ------
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
toluidine (CAS RN 119-32-4) -p- -Methylaniline (CAS RN 100-61-8) -Methylaniline 70-0 or 6106-22-5) 70-0 or Description 2-Fluoroaniline (CAS RN 348-54-9) RN 88-74-4) (CAS RN 2-Fluoroaniline (CAS 2-Nitroaniline 636-30-6) 121-47-1) RN RN 98-44-2) (CAS (CAS Sodium sulphanilate (CAS RN 515-74-2), of its mono- also in or dihydrates (CAS form RN 12333- RN 2,4,5-Trichloroaniline acid (CAS 89-63-4) 3-Aminobenzenesulfonic acid RN 121-87-9) 2-Aminobenzene-1,4-disulfonic (CAS RN 626-43-7) 4-Chloro-2-nitroaniline (CAS RN 95-82-9) 2-Chloro-4-nitroaniline (CAS RN 6331-96-0) 3,5-Dichloroaniline (CAS RN 88-51-7) 2,5-Dichloroaniline (CAS RN N acid (CAS 88-44-8) 3,4-Dichloroaniline-6-sulphonic acid RN 4-Amino-6-chlorotoluene-3-sulphonic (CAS 455-14-1) 3-Nitro acid RN 98-16-8) 4-Aminotoluene-3-sulphonic (CAS RN 4-Aminobenzotrifluoride (CAS 3-Aminobenzotrifluoride 33 35 40 45 50 70 80 82 85 86 87 88 20 30 40 50 60 TARIC CN code ex 2921 42 00 ex 2921 42 00 ex 2921 42 00 ex 2921 42 00 ex 2921 42 00 ex 2921 42 00 ex 2921 42 00 ex 2921 42 00 ex 2921 42 00 ex 2921 42 00 ex 2921 43 00 ex 2921 43 00 ex 2921 43 00 *ex 2921 42 00 *ex 2921 42 00 *ex 2921 43 00 *ex 2921 43 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 36
review mandatory End date for End date
31.12.2016 31.12.2017 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2020 31.12.2017 31.12.2018 31.12.2018 31.12.2016 31.12.2019 31.12.2018 Unit Supplementary ------
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 diaminotoluene 0 % 0 phenylenediamine, and phenylenediamine, and p- 0 % 0 m- m- 0 % 0
0 % 0 3.5% 0 % 0 0 % 0 0 % 0
0 % 0 phenylenediamine and 0 % 0 p- 0 % 0 toluidine (CAS RN 121-50-6) m- -trifluoro- α , phenylenediamine sulphate (CAS RN 615-50-9) (CAS phenylenediamine sulphate α toluidine (CAS RN 102-27-2) , α -p- m- Phenylenediamine (CAS RN 106-50-3) -Ethyl- (CAS RN -1-Naphthylaniline 90-30-2) 19532-03-7) or (CAS RN 62203-79-6) RN (CAS 19532-03-7) or % of 4-methyl- but than 82 % or more not more — 72 % of 2-methyl- but than 22 % or more not more — 17 tar residual of % 0,23 than more — not less of water % or whether or not containing 7 Description Diphenylamine (CAS RN 122-39-4) N RN 118-03-6) 6-Chloro- (CAS RN 40487-42-1) Diphenylamine (CAS RN acid (CAS 2-Aminonaphthalene-1,5-disulphonic (CAS RN sodium acid (CAS RN salts 117-62-4) or one of its 7-Aminonaphthalene-1,3,6-trisulphonic (ISO) 95-64-7) Pendimethalin RN N (CAS 24544-04-5) 3,4-Xylidine RN (CAS 238098-26-5) weight: 2,6-Diisopropylaniline RN 99-88-7) by (CAS RN containing 4-Heptafluoroisopropyl-2-methylaniline (CAS (TDA), 4-Isopropylaniline diamine Toluene of 88-63-1) 2-Methyl dichloroderivatives RN p- and (CAS Mono- acid 2,4-Diaminobenzenesulphonic 70 80 20 20 50 20 40 50 60 80 85 20 30 40 50 60 TARIC CN code ex 2921 49 00 ex 2921 43 00 ex 2921 44 00 ex 2921 45 00 ex 2921 45 00 ex 2921 49 00 ex 2921 49 00 ex 2921 49 00 ex 2921 49 00 ex 2921 51 19 ex 2921 51 19 ex 2921 51 19 ex 2921 51 19 ex 2921 51 19 ex 2921 43 00 *ex 2921 49 00
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 37
review mandatory End date for End date
31.12.2020 31.12.2018 31.12.2017 31.12.2018 31.12.2017 31.12.2020 31.12.2017 31.12.2017 31.12.2018 31.12.2020 31.12.2016 31.12.2018 31.12.2018 31.12.2018 31.12.2016 31.12.2018 31.12.2019 31.12.2018 31.12.2018 Unit Supplementary ------
duty Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 -oxybis(ethylamine), (CAS RN 83016-70-0) ′ 0 % 0 -methyl-1,3-propanediamine (CAS RN 189253-72-3)-methyl-1,3-propanediamine N -oxybis(ethylamine) (CAS RN -oxybis(ethylamine) 3033-62-3) ′ nitrophenyl)propane-1,3-diol (CAS RN 716-61-0) -disulphonic acid (CAS RN 81-11-8) -disulphonic acid ′ p- -(2-hydroxy-ethyl) 2,2 -(2-hydroxy-ethyl) ′ N -Tetramethyl-2,2 ′ N , -trimethyl- ′ ′ 4-Aminocyclohexanol (CAS RN 27489-62-9) 4-AminocyclohexanolRN (CAS N N , , -Dichlorobenzidine dihydrochloride (CAS RN 612-83-9) -Diaminostilbene-2,2 ′ ′ N N , , -[2-[2-(Dimethylamino)ethoxy]ethyl]- Description 4-Bromo- 1,2-diaminobenzene (CAS RN 1575-37-7) RN (CAS 1,2-diaminobenzene 4-Bromo- 1247119-31-8) RN of 3,5-diethyltoluenediamine Mixture of isomers 3,3 (CAS 548-61-8) 64464-07-9) 4,4 dihydrochloride RN RN 36673-16-2) (2R,5R)-1,6-Diphenylhexane-2,5-diamine (CAS (CAS RN Tris(4-aminophenyl)methane hydrochloride (CAS 2-(2-Methoxyphenoxy)ethylamine bis(triethanolamine)diisopropoxide 1704-62-7) Titanium RN N (CAS ethanol 10213-78-2) 2-[2-(Dimethylamino)ethoxy] RN 1836-62-0) (CAS RN 2-[2-Hydroxyethyl(octadecyl)amino]ethanol (CAS 2-(2-Methoxyphenoxy)ethylamine N 110-76-9) trans- RN D-(-)-threo-2-amino-1-( (CAS 229177-52-0) 6535-70-2) 2-Ethoxyethylamine RN RN (CAS N (CAS (1S,4R)-cis-4-Amino-2-cyclopentene-1-methanol-D-tartrate acid 2-Amino-5-hydroxynaphthalene-1,7-disulphonic 70 10 30 40 60 70 20 25 30 35 45 50 60 65 70 75 80 85 10 TARIC CN code ex 2922 19 85 ex 2922 19 85 ex 2921 59 90 ex 2921 59 90 ex 2921 59 90 ex 2921 59 90 ex 2922 19 85 ex 2922 19 85 ex 2922 19 85 ex 2922 19 85 ex 2922 19 85 ex 2922 19 85 ex 2922 19 85 ex 2922 19 85 ex 2922 19 85 ex 2922 19 85 ex 2922 21 00 *ex 2921 51 19 *ex 2921 59 90
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 38
review mandatory End date for End date
31.12.2019 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2020 31.12.2018 31.12.2020 31.12.2019 31.12.2018 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2020 31.12.2020 Unit Supplementary ------
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % % 0 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
-cresol (CAS RN 2835-95-2)
o -anisidine (CAS RN 97-52-9) o RN 90-20-0) Description 6-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 90-51-7) 5460-09-3) 87-02-5) RN RN RN (CAS (CAS (CAS acid 4-amino-5-hydroxynaphthalene-2,7-disulphonate acid 6-Amino-4-hydroxynaphthalene-2-sulphonic hydrogen 7-Amino-4-hydroxynaphthalene-2-sulphonic 591-27-5) Sodium RN 25251-42-7) 52411-34-4) (CAS 4-Amino-5-hydroxynaphthalene-2,7-disulphonic% or more (CAS acid with a purity by 80 weight of RN RN 3-Aminophenol (CAS (CAS 5-Amino- acid 1,2-Bis(2-aminophenoxy)ethane 4-Hydroxy-6-[(3-sulphophenyl)amino]naphthalene-2-sulphonic Anisidines 461-82-5) RN 51-67-2) (CAS % or more (CAS RN 74070-46-5) Aclonifen (ISO) with a purity by 97 weight of 51388-20-6) 91-68-9) RN 4-Trifluoromethoxyaniline salts RN RN (CAS 4-Nitro- its (CAS (CAS 4-(2-Aminoethyl)phenol 719-59-5) and hydrochloride 3-Diethylaminophenol RN acid 4-Benzyloxyaniline 5409-58-5) (CAS 1-Amino-4-bromo-9,10-dioxoanthracene-2-sulphonic 1022-13-5) RN 2-Amino-5-chlorobenzophenone RN (CAS (CAS 3-(Dimethylamino)-1-(1-naphthalenyl)-1-propanone)hydrochloride 5-Chloro-2-(methylamino)benzophenone 30 40 50 60 20 25 30 40 45 63 65 70 75 80 85 10 20 25 35 TARIC
CN code ex 2922 29 00 ex 2922 39 00 ex 2922 21 00 ex 2922 21 00 ex 2922 21 00 ex 2922 29 00 ex 2922 29 00 ex 2922 29 00 ex 2922 29 00 ex 2922 29 00 ex 2922 29 00 ex 2922 39 00 ex 2922 39 00 ex 2922 21 00 *ex 2922 29 00 *ex 2922 29 00 *ex 2922 29 00 *ex 2922 29 00 *ex 2922 39 00 ______
M5 M4 M5 M4 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 39
review mandatory End date for End date
31.12.2016 31.12.2018 31.12.2018 31.12.2019 31.12.2017 31.12.2019 31.12.2020 31.12.2018 31.12.2020 31.12.2019 31.12.2019 31.12.2017 31.12.2020 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2019 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 )
1 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0
0 % 0
[(2-Chloroethyl)ethylamino]benzaldehyde (CAS RN 2643-07-4) (CAS [(2-Chloroethyl)ethylamino]benzaldehyde 4316-73-8) hydroxide weight of tetramethylammonium Description DL-Aspartic acid used for the manufacture of food-integrators (CAS RN 617-45-8) ( 617-45-8) RN (CAS food-integrators of 3230-94-2) 118-92-3) manufacture RN RN the (CAS (CAS 2840-28-0) for (INNM) acid p- 5372-81-6) RN used aspartate Anthranilic RN (CAS acid Ornithine (CAS acid DL-Aspartic 2-aminobenzene-1,4-dicarboxylate 3-Amino-4-chlorobenzoic Dimethyl 56-40-6) % by (CAS RN weight or more of sodium methylaminoacetate Aqueous solution containing 40 0138070-7) 26774-88-9) RN (CUS 13433-00-6) RN (CAS Norvaline RN maleate 10287-53-3) (CAS Glycine (CAS RN 4-(dimethylamino)but-2-enoate D-(-)-Dihydrophenylglycine 72556-74-2) 693-57-2) 21245-02-3) hydrochloride (CAS (E)-Ethyl RN 130198-05-9) RN RN aminomalonate Ethyl-4-dimethylaminobenzoate (CAS RN (CAS (CAS Diethyl tetrahydrate (CAS acid 2-Ethylhexyl-4-dimethylaminobenzoate chloride hydrochloride 12-Aminododecanoic choline acetate 1-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol phosphoryl 2-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium Calcium by %) 0,5 % (± Tetramethylammonium hydroxide, of an aqueous in the form solution containing 25 70 10 10 15 20 25 30 40 45 50 55 60 65 70 80 20 70 10 10 TARIC CN code ex 2922 49 85 ex 2922 49 85 ex 2922 43 00 ex 2922 49 85 ex 2922 49 85 ex 2922 49 85 ex 2922 49 85 ex 2922 49 85 ex 2922 49 85 ex 2922 49 85 ex 2922 49 85 ex 2922 49 85 ex 2922 50 00 ex 2922 50 00 ex 2923 10 00 ex 2923 90 00 ex 2922 39 00 *ex 2922 49 85 *ex 2922 49 85
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 40
review mandatory End date for End date
31.12.2019 31.12.2018 31.12.2018 31.12.2020 31.12.2018 31.12.2019 31.12.2018 31.12.2019 31.12.2020 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0 0 % 0 0 % 0 0 % 0
0 % 0
0 % 0
-methylcarbamoyl chloride (CAS RN 42252-34-6) N -Trimethylanilinium chloride (CAS RN 138-24-9) N , N , -Ethyl — 40 % (± 2 %) by weight of tetrapropylammonium by hydroxide, %) weight of tetrapropylammonium 2 % (± — 40 % by of carbonate, weight or less — 0,3 % by of tripropylamine, weight or less — 0,1 — 500 mg/kg of bromide, or less and — 25 mg/kg of potassium and or less sodium taken together %) by hydroxide, weight of tetraethylammonium 0,5 % (± — 35 chloride, of mg/kg 000 1 than more — not and iron, of mg/kg 2 than more — not potassium of mg/kg 10 than more — not chloride, (CAS RN % of diallyldimethylammonium 7398-69-8) or more but not than 67 58374-69-9) RN (CAS salt ammonium its 5165-97-9), or Description Tetrapropylammonium hydroxide, in the form of an aqueous solution containing: solution 79723-02-7) aqueous RN an (CAS 117342-25-3) of phthalate RN % containing: form hydrogen (CAS 63 solution the Tetramethylammonium molybdate, aqueous weight in Tetrakis(dimethylditetradecylammonium) an by hydroxide, of containing Tetrapropylammonium form solution the aqueous in an hydroxide, of Tetraethylammonium form the in chloride, Diallyldimethylammonium N 181289-33-8) RN 87333-22-0) 2-Acrylamido-2-methylpropanesulphonic acid (CAS RN 15214-89-8)(CAS RN or its sodium salt (CAS RN N acid (CAS (R)-(-)-3-(carbamoylmethyl)-5-methylhexanoic 2-acetamido-3-chloropropionate Methyl 20 25 70 75 80 85 10 15 20 30 TARIC CN code ex 2923 90 00 ex 2923 90 00 ex 2923 90 00 ex 2923 90 00 ex 2924 19 00 ex 2924 19 00 ex 2924 19 00 ex 2923 90 00 *ex 2923 90 00 *ex 2924 19 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 41
review mandatory End date for End date
31.12.2019 31.12.2018 31.12.2018 31.12.2016 31.12.2018 31.12.2017 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2019 31.12.2019 31.12.2019 31.12.2016 31.12.2019 31.12.2018 Unit Supplementary ------
duty Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -(propan-2-yloxymethyl)acetamide (CAS -(propan-2-yloxymethyl)acetamide RN 86763-47-5) 0 % 0 N 0 % 0 0 % 0 0 % 0 -ureylenedi(naphthalene-2-sulfonic acid) and -ureylenedi(naphthalene-2-sulfonic its sodium salts ′ -(2-ethyl-6-methylphenyl)- N -Dimethylacrylamide (CAS RN 2680-03-7) -Dihydroxy-7,7 ′ N -(1,1-Dimethyl-3-oxobutyl)acrylamide (CAS -(1,1-Dimethyl-3-oxobutyl)acrylamide RN 2873-97-4) , (CAS RN -(4-Amino-2-ethoxyphenyl)acetamide 848655-78-7) Description Acetamide (CAS RN 60-35-5) RN (CAS 79-06-1) Acetamide RN N (CAS 598-55-0) Acrylamide RN 4559-86-8) N (CAS RN 59690-88-9) Methylcarbamate (CAS RN 15972-60-8) Tetrabutylurea (CAS RN 88-64-2) 4,4 hydrochloride (CAS RN 34256-82-1) (3-Aminophenyl)urea (ISO), (CAS RN 360-64-5) Alachlor acid (CAS RN 3079-63-8) 4-(Acetylamino)-2-aminobenzenesulphonic (ISO), (CAS RN Acetochlor benzamide (CAS 98243-83-5) 2-(Trifluoromethyl) acid RN 2-[[2-(Benzyloxycarbonylamino)acetyl]amino]propionic (CAS 1009-22-9) 2-Chloro- (ISO) RN 113614-08-7) Benalaxyl-M (CAS RN 2-Bromo-4-fluoroacetanilide (CAS N (ISO) Beflubutamid 35 40 50 60 70 80 10 20 10 12 15 17 19 20 23 27 33 37 TARIC CN code ex 2924 19 00 ex 2924 19 00 ex 2924 19 00 ex 2924 19 00 ex 2924 19 00 ex 2924 21 00 ex 2924 21 00 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 19 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 42
review mandatory End date for End date
31.12.2020 31.12.2018 31.12.2020 31.12.2017 31.12.2017 31.12.2020 31.12.2020 31.12.2020 31.12.2020 31.12.2016 31.12.2020 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2017 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 )-2-allylcyclopropoxy)carbonylamino)-3,3-dimethylbutanoate )-2-allylcyclopropoxy)carbonylamino)-3,3-dimethylbutanoate R 0 % 0 ,2 R -ylene)di(acetoacetamide) (CAS -ylene)di(acetoacetamide) RN 91-96-3) ′ -biphenyl]-2-yl)-acetamide (CAS RN 877179-03-8) ′ )-2-(((1 S -dimethoxy-2-naphthanilide (CAS RN 92-72-8) ′ ,4 (CAS RN -methyl-2-naphthanilide 135-63-7) ′ ′
anisanilide (CAS RN 120-35-4) -[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8) -[4-(aminocarbonyl)phenyl]benzamide -Dimethylbiphenyl-4,4 N ′ -p- -dichloro-5-fluoro[1,1 ′ ,4 ′ -1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5) -(3,3 -(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 24304-50-5) (CAS RN 41131-65-1) -(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide], ′ ′ ′ ′ N N N N )-1-Phenylethanamine ( Aminobenzamide (CAS RN 2835-68-9) RN Aminobenzamide (CAS -Chloro-3-hydroxy-2 -Chloro-3-hydroxy-2 , , , , RN 39711-79-0) (CAS -Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide ′ ′ S (CUS 0143288-8) Description Propoxur (ISO) (CAS RN 114-26-1) 59673-82-4) RN RN (CAS N (CAS (ISO) N 2-amino-4-[[(2,5-dichlorophenyl)amino]carbonyl]benzoate Propoxur Methyl 4-Amino- N N 609-66-5) RN ( (CAS 2-Chlorobenzamide N 15299-99-7) 17194-82-0) RN RN N-(3 (CAS (CAS (ISO) 2-(4-Hydroxyphenyl)acetamide Napropamide 103-90-2) 3-Amino RN 5 66332-96-5) (CAS p- RN (INN) (CAS Paracetamol (CAS RN % or more 88-68-6) of a purity by weight of 99,5 Anthranilamide (ISO) 5 Flutolanil 40 43 45 51 53 55 60 61 62 63 64 65 73 75 80 85 86 87 88 89 TARIC CN code ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 *ex 2924 29 98 *ex 2924 29 98 *ex 2924 29 98 *ex 2924 29 98
M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 43
review mandatory End date for End date
31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2017 31.12.2017 31.12.2018 31.12.2018 31.12.2020 31.12.2019 31.12.2018 31.12.2020 31.12.2019 31.12.2020 31.12.2019 31.12.2018 31.12.2016 Unit Supplementary ------
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -ethylcarbodiimide hydrochloride (CAS RN 25952-53-8) ′ N 0 % 0 -methoxy-2-naphthanilide (CAS RN 135-62-6) -methyl-2-naphthanilide (CAS RN 135-61-5) ′ ′ Phenylene)dimaleimide (CAS RN Phenylene)dimaleimide 3006-93-7)
m- Benzoylphenyl)propiononitrile (CAS RN 42872-30-0) -( ′ m- N -Ethoxy-3-hydroxy-2-naphthanilide (CAS RN 92-74-0) -Phenylmaleimide (CAS RN 941-69-5) , -[3-(Dimethylamino)propyl]- ′ or more Description 3-Hydroxy-2-naphthanilide (CAS RN 92-77-3) 99189-60-3) RN RN (CAS 3-Hydroxy-2 salt (CAS 3-Hydroxy-2-naphthanilide sodium monoamide 3-Hydroxy-2 its acid 2 4720-86-9) and 1,1-Cyclohexanediacetic RN Saccharin 538-75-0) (CAS N 50979-18-5) RN 4,5,6,7-Tetrahydroisoindole-1,3-dione RN (CAS N (CAS Dicyclohexylcarbodiimide 22115-41-9) sulphamate N 52449-76-0) 372-09-8) RN Guanidine RN RN (CAS (CAS (CAS alpha-Bromo-o-toluonitrile % or more (CAS RN 68359-37-5) Cyfluthrin (ISO) with a purity by 95 weight of ester acid methyl Cyanoacetic acid 4-Cyano-2-nitrobenzoic 101007-06-1) RN % (CAS RN 52315-07-8) stereoisomers with its with a purity by Cypermethrin (ISO) weight of 90 10222-01-2) (CAS RN (ISO) 2-( (CAS Acrinathrin 2,2-Dibromo-3-nitrilopropionamide 91 92 93 94 97 20 10 20 30 10 20 30 12 13 14 16 17 20 23 25 TARIC CN code ex 2926 90 95 ex 2926 90 95 ex 2926 90 95 ex 2926 90 95 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2924 29 98 ex 2925 11 00 ex 2925 19 95 ex 2925 19 95 ex 2925 19 95 ex 2925 29 00 ex 2925 29 00 ex 2926 90 95 ex 2926 90 95 ex 2926 90 95 ex 2926 90 95 ex 2924 29 98 *ex 2925 29 00
M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 44
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2016 31.12.2016 31.12.2019 31.12.2018 31.12.2019 31.12.2019 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2018 Unit Supplementary ------
duty 0 % 0 % Rate of autonomous 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -azodipropionamidine dihydrochloride ′ -azodivaleric acid (CAS RN 2638-94-0) ′
-Azodi(formamide) (CAS RN 123-77-3) in the form of yellow powder with a decomposition ′ -Dimethyl-2,2 -Dicyano-4,4 ′ ′ (1-Cyanoethyl)benzoic acid (CAS RN 5537-71-3) (1-Cyanoethyl)benzoic acid -Aminoazobenzene-4-sulphonic acid (CAS RN 104-23-4) RN (CAS -Aminoazobenzene-4-sulphonic acid ′ 66230-04-4) temperature of 180 °C temperature or more but not more than 220 °C used as a foaming agent in the manu facture of resins, thermoplastic elastomer and cross-linked polythene foam Description Cyhalofop-butyl (ISO) (CAS RN 122008-85-9) RN (CAS (ISO) 24131-07-5) Cyhalofop-butyl RN (CAS acid Alkyl of cyanoacetic or alkoxyalkyl esters Methyl-2-cyano-2-phenylbutyrate 109-77-3) m- RN 126-98-7) 1897-45-6) (CAS RN own (CAS RN or more in a mixture of its isomers % of a purity by weight of 83 Esfenvalerate RN 100453-11-0) Malononitrile (CAS (CAS RN Methacrylonitrile (ISO) (CAS Chlorothalonil 2-cyano-2-ethyl-3-methylhexanoate 5766-67-6) Ethyl RN 109-74-0) 36305-05-2) (CAS RN RN 2-cyano-2-phenylbutyrate (CAS RN 718-71-8) Ethyl Ethylenediaminetetraacetonitrile (CAS (CAS Butyronitrile sulphate 2,2 hydrogen 4-Anilino-2-methoxybenzenediazonium 4 C.C 4,4 27 50 55 61 64 65 70 74 75 80 86 89 10 20 30 35 60 TARIC CN code ex 2926 90 95 ex 2926 90 95 ex 2926 90 95 ex 2926 90 95 ex 2926 90 95 ex 2926 90 95 ex 2926 90 95 ex 2926 90 95 ex 2926 90 95 ex 2926 90 95 ex 2926 90 95 ex 2927 00 ex 2927 00 ex 2927 00 ex 2927 00 ex 2927 00 ex 2926 90 95
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 45
review mandatory End date for End date
31.12.2017 31.12.2018 31.12.2019 31.12.2019 31.12.2020 31.12.2020 31.12.2016 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2016 31.12.2018 31.12.2016 Unit Supplementary ------
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 -bipropionamide (CAS RN 32687-78-8) ′ 0 % 0 N 0 % 0 0 % 0 , N 0 % 0 0 % 0 0 % 0 -(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN disodium 133986- -(hydroxyimino) bisethanesulphonic acid salt ′ -methylacetamide (CAS RN 67442-07-3) N butyl-4-hydroxyphenyl)- -tert- -methoxy- N -Bis(3,5-di ′ -Ethylhydroxylamine, in the form of an aqueous solution (CAS RN 624-86-2) (CAS an aqueous solution of form the -Ethylhydroxylamine, in -Isopropylhydroxylamine (CAS RN 5080-22-8) 51-3) with a content by weight of more than 33,5 % but not more than 36,5 % % but not more than 36,5 51-3) with a content by weight of more than 33,5 Description 4-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic acid (CAS RN 51867-77-7) RN (CAS 57966-95-7) acid RN 107-29-9) 4-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic (CAS RN 3,3 (ISO) (CAS Cymoxanil solution aqueous % or more Acetone oxime (CAS RN 127-06-0) of a purity by 99 weight of an in % or more (CAS RN Metobromuron 3060-89-7) (ISO) with a purity by weight of 98 oxime Acetaldehyde 112410-23-8) N RN 2582-30-1) 2-Chloro- (CAS 2,2 RN O (ISO) of (CAS Tebufenozide solution carbonate 1071-93-8) Aqueous hydrogen RN hydrochloride 96-29-7) Aminoguanidinium (CAS semicarbazone RN 139968-49-3) Adipohydrazide propanal (CAS RN 180409-60-3) 2-Amino-3-(4-hydroxyphenyl) oxime (CAS RN Butanone (ISO) (CAS Metaflumizone (ISO) Cyflufenamid more (CAS RN % or 1596-84-5) with a purity by Daminozide weight of 99 (ISO) 80 10 13 18 23 25 30 35 40 45 50 55 60 65 70 75 80 85 TARIC CN code ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2927 00 *ex 2928 00 90 *ex 2928 00 90
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 46
review mandatory End date for End date
31.12.2018 31.12.2019 31.12.2017 31.12.2018 31.12.2018 31.12.2016 31.12.2018 31.12.2016 31.12.2017 31.12.2016 31.12.2020 31.12.2016 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2016 31.12.2020 31.12.2016 31.12.2020 Unit Supplementary ------
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -{2-methyl-4-[1,2,2,2-tetrafluoro-1-(trifluor ′ 0 % 0 -diyl diisocyanate (CAS RN 91-97-4) ′ octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3) -dimethylbenzyl isocyanate (CAS RN 2094-99-7) α , -tert- α -Thio-bis(4 ′ -Dimethylbiphenyl-4,4 ′ Isopropenyl- Phenylenediisopropylidene diisocyanate (CAS RN 2778-42-9) omethyl)ethyl]phenyl}phthalamide (CAS RN 371771-07-2) Description Methylenedicyclohexyl diisocyanates (CAS RN 28605-81-4) RN 111-36-4) (CAS RN diisocyanates 74091-64-8) (CAS Methylenedicyclohexyl RN isocyanate 3,3 (CAS Butyl isomers 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane m- 52888-80-9) 3634-83-1) mixed (and m- RN RN diisocyanate, 2,5 141-98-0) (CAS (CAS Trimethylhexamethylene 156-57-0) 131538-00-6) RN (ISO) 1,3-Bis(isocyanatomethyl)benzene RN RN (CAS Prosulfocarb 13194-48-4) 3446-89-7) (CAS (CAS 2-Isopropylethylthiocarbamate 2494-88-4) RN RN hydrochloride 2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol RN 31001-77-1) (CAS (CAS Mercaptamine (CAS RN (ISO) 4-(Methylthio)benzaldehyde 106310-17-2) sulphate (CAS Ethoprophos RN hydrogen 3-(Dimethoxymethylsilyl)-1-propanethiol (CAS 2-(3-Aminophenylsulphonyl)ethyl 1-Methyl-5-[3-methyl-4-[4-[(trifluoromethyl)thio]phenoxy]phenyl]biuret N-(2-Methylsulfinyl-1,1-dimethyl-ethyl)-N [2,2 % or more (CAS RN 335104-84-2) Tembotrione (ISO) with a purity by 94,5 weight of 10 15 20 40 50 55 60 80 10 20 10 13 14 15 16 17 18 19 21 22 TARIC CN code ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2929 10 00 ex 2929 10 00 ex 2929 10 00 ex 2929 10 00 ex 2929 10 00 ex 2929 10 00 ex 2930 20 00 ex 2930 20 00 ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2929 10 00 *ex 2929 10 00 *ex 2930 90 99
M5 M4 M5 M4 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 47
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2020 31.12.2019 31.12.2018 31.12.2019 31.12.2016 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2020 31.12.2020 31.12.2018 31.12.2019 31.12.2016 31.12.2017 31.12.2018 Unit Supplementary ------
duty Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 Aminophenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 2494-89-5) -Thiodi(propionic acid) (CAS RN -Thiodi(propionic acid) 111-17-1) p- ′ Description Dimethyl [(methylsulphanyl)methylylidene]biscarbamate (CAS RN 34840-23-8) RN 23564-05-8) (CAS RN [(methylsulphanyl)methylylidene]biscarbamate (CAS Dimethyl (ISO), 26672-22-0) Thiophanate-methyl RN (CAS sulphate 95235-30-6) 42986-22-1) % or more RN 133-07-3) Folpet (ISO)(CAS with a purity by weight of 97,5 hydrogen RN RN 2-[(4-Amino-3-methoxyphenyl)sulphonyl]ethyl (CAS (CAS 70-18-8) 4-(4-Isopropoxyphenylsulphonyl)phenol acid RN 62-55-5) 2-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonIc (CAS RN 1774-47-6) Glutathione (CAS RN Ethanethioamide (CAS 80-07-9) 3,3 iodide RN Trimethylsulfoxonium (CAS 62-56-6) 16630-66-3) 100-68-5) 2-[( sulphone RN RN RN 82961-52-2) Bis(4-chlorophenyl) (CAS (CAS (CAS RN Thiourea (methylthio)acetate sulphide (CAS 7575-23-7) Methyl phenyl RN sulphide 139-66-2) Methyl (CAS methyl RN 120100-05-2) 3-Chloro-2-methylphenyl tetrakis(3-mercaptopropionate) (CAS RN Pentaerythritol sulphide (CAS Diphenyl acid 3-Bromomethyl-2-chloro-4-(methylsulphonyl)-benzoic 23 25 26 27 30 33 35 37 40 43 45 53 55 57 60 64 65 66 67 TARIC CN code ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 *ex 2930 90 99 *ex 2930 90 99 *ex 2930 90 99 *ex 2930 90 99
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 48
review mandatory End date for End date
31.12.2017 31.12.2018 31.12.2016 31.12.2018 31.12.2019 31.12.2017 31.12.2018 31.12.2016 31.12.2018 31.12.2020 31.12.2017 31.12.2016 31.12.2019 31.12.2019 31.12.2018 31.12.2017 Unit Supplementary ------
- duty 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 3% 0 % 0 0 % 0 0 % 0
0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 tolyl sulphone (CAS RN 3185-99-7)
butylphosphane (CAS RN 819-19-2) RN butylphosphane (CAS -p- -tert- )-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6)RN (CAS acid )-Prop-1-en-1-ylphosphonic Z bonates drofuran according to note 1e to Chapter 29 of the CN (CAS RN 12108-13-3) pentadienyl manganese tricarbonyl Description Clethodim (ISO) (CAS RN 99129-21-2) RN (CAS 97042-18-7) (ISO) RN 131538-00-6) 133-06-2) Clethodim 5719-73-3) (CAS RN RN RN 4-[4-(2-Propenyloxy)phenylsulphonyl]phenol (CAS (CAS (CAS 4-Mercaptomethyl-3,6-dithia-1,8-octanedithiol (ISO) dihydrate 15451-00-0) Captan hexamethylene-1,6-bisthiosulfate RN Disodium (CAS solution Methyl acid aqueous 3-Sulphinobenzoic an in 13360-78-6) or O-pentyl-dithiocar O-isopropyl-, O-butyl-, O-isobutyl- sodium-salt of O-ethyl-, Potassium- or RN 78-50-2) Butylethylmagnesium (CAS RN 62202-86-2), a solution in the form of in heptane (CAS RN 37859-55-5) diisobutyldithiophosphinate Diethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahy (CAS RN Sodium oxide (CAS Trioctylphosphine silane (2-pentanoneoxime) tris cyclo of by weight % than 4,9 containing not more tricarbonyl Methylcyclopentadienyl manganese Methyl Di ( 68 77 78 80 81 83 87 89 03 05 08 13 15 18 23 25 TARIC CN code ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2930 90 99 ex 2931 90 80 ex 2931 90 80 ex 2931 90 80 ex 2931 90 80 ex 2931 90 80 ex 2931 90 80 ex 2931 90 80 ex 2930 90 99 *ex 2931 90 80
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 49
review mandatory End date for End date
31.12.2019 31.12.2018 31.12.2019 31.12.2019 31.12.2016 31.12.2016 31.12.2018 31.12.2018 31.12.2019 31.12.2016 31.12.2019 31.12.2018 31.12.2020 31.12.2020 31.12.2020 31.12.2020 31.12.2020 31.12.2020 31.12.2018 31.12.2020 Unit Supplementary ------
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
-Dimethylanilinium tetrakis(pentafluorophenyl)borate (CAS RN -Dimethylanilinium tetrakis(pentafluorophenyl)borate 118612-00-3) N -(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6) , cyclo[4.2.1]nonane Description Tetrabutylphosphonium acetate in the form of an aqueous solution (CAS RN 30345-49-4) 83411-71-6) RN RN 220492-55-7) (CAS (CAS 824-72-6) RN solution acid N 124-64-1) RN (CAS aqueous Bis(2,4,4-trimethylpentyl)phosphinic 9-icosyl-9-phosphabi RN (CAS Dimethyl[dimethylsilyldiindenyl]hafnium an and (CAS 9-icosyl-9-phosphabicyclo[3.3.1]nonane dichloride N of isomers chloride Phenylphosphonic form 37859-57-7) the Tetrakis(hydroxymethyl)phosphonium of the RN Mixture 993-07-7) in (CAS 593-90-8) RN acetate Tris(4-methylpentan-2-oximino)methylsilane 5927-18-4) RN (CAS Tetrabutylphosphonium RN (CAS Trimethylsilane 944129-07-1) (CAS Trimethylborane RN phosphonoacetate 61358-25-6) 1719-58-0) (CAS Trimethyl 3-(Hydroxyphenylphosphinoyl)propionic(CAS RN 14657-64-8) acid 3865-34-7) RN RN acid 134150-01-9) RN (CAS (CAS 4-Chloro-2-fluoro-3-methoxyphenylboronic RN (CAS hexafluorophosphate Chloroethenyldimethylsilane 97-99-4) (CAS dioleate Bis(4-tert-butylphenyl)iodonium RN acid Dimethyltin (CAS (4-Propylphenyl)boronic 14044-65-6) alcohol RN Tetrahydrofurfuryl (CAS Tetrahydrofuran-borane 28 30 33 35 38 40 43 45 48 50 53 55 57 60 63 65 67 70 10 20 TARIC CN code ex 2931 90 80 ex 2932 13 00 ex 2932 19 00 ex 2931 90 80 ex 2931 90 80 ex 2931 90 80 ex 2931 90 80 ex 2931 90 80 ex 2931 90 80 ex 2931 90 80 ex 2931 90 80 ex 2931 90 80 ex 2931 90 80 ex 2931 90 80 ex 2931 90 80 ex 2931 90 80 ex 2931 90 80 ex 2931 90 80 ex 2931 90 80 *ex 2931 90 80
M5 M4 M5 M4 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 50
review mandatory End date for End date
31.12.2019 31.12.2019 31.12.2019 31.12.2019 31.12.2018 31.12.2016 31.12.2018 31.12.2016 31.12.2017 31.12.2018 31.12.2017 31.12.2018 31.12.2018 31.12.2016 31.12.2020 31.12.2018 31.12.2016 31.12.2016 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 ]xanthen]-3-one ]xanthen]-3-one ]xanthen]-3-one ]xanthen]-3-one H H H -[9 -xanthen]-3-one (CAS ′ -[9 -[9 ′ ′ ′ -carboxylate (CAS RN -carboxylate ),9 ′ ),9 ),9 -xanthen]-3-one (CAS RN ),9 ′ H H H H 0 % 0 0 % 0 ),9 ]-xanthen]-3-one, (CAS RN H H -D-galactopyranoside (CAS RN -D-galactopyranoside α -[9 ′ ),9 -xanthene]-2 ′ H 0 % 0
0 % 0 0 % 0 0 % 0 -methylspiro[isobenzofuran-1(3 ′ -spiro[2-benzofuran-1,9 0 % 0 H -(diethylamino)-spiro[isobenzofuran-1(3 ′ -(phenylamino)-spiro[isobenzofuran-1(3 -(phenylamino)-spiro[isobenzofuran-1(3 0 % 0 ′ ′ -(2,4-xylidino)spiro[isobenzofuran-1(3 ′ -D-fructofuranosyl-4-chloro-4 deoxy- -D-fructofuranosyl-4-chloro-4 β -dimethylspiro[isobenzofuran-1(3 ′ ,7
′ -methyl-2 -methyl-2 ′ ′ -methyl-2 ′ -butyrolactonehydrobromide (CAS RN 15295-77-9)
γ
-[ethyl(isopentyl)amino]-3
′ -(diethylamino)-3-oxo-3 ′ -Amino- α -Bis(ethylamino)-2 ′ )-(-)- -Anilino-6 -Diethylamino-3 -(Diethylamino)-3 ,6 -(Dibutylamino)-3 -[Bis(phenylmethyl)amino]-6 ′ ′ ′ ′ ′ ′ S 56038-13-2) RN 70516-41-5) 154306-60-2) 36431-22-8) (CAS RN 29512-49-0) 41382-37-0) (CAS RN 89331-94-2) (CAS RN 34372-72-0) Description 2,2 Di(tetrahydrofuryl)propane (CAS RN 89686-69-1) RN (CAS Di(tetrahydrofuryl)propane 617-89-0) more % or 2,2 Furan (CAS RN 110-00-9) of a purity by weight of 99 92-55-7) 96-47-9) RN 1,6-Dichloro-1,6-dideoxy- RN RN (CAS (CAS (CAS Furfurylamine di(acetate) Tetrahydro-2-methylfuran 91-64-5) 5-Nitrofurfurylidene RN 2 (CAS Coumarin 6 Ethyl 2033-24-1) 6 1552-42-7) RN RN (CAS ( 1134960-41-0) (CAS 2,2-Dimethyl-1,3-dioxane-4,6-dione RN 6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide (CAS 6 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate Sodium 3 6 2 40 41 45 70 75 80 10 15 20 35 40 45 55 60 65 70 71 72 TARIC CN code ex 2932 19 00 ex 2932 19 00 ex 2932 19 00 ex 2932 19 00 ex 2932 19 00 ex 2932 20 90 ex 2932 20 90 ex 2932 20 90 ex 2932 20 90 ex 2932 20 90 ex 2932 20 90 ex 2932 20 90 ex 2932 20 90 ex 2932 20 90 ex 2932 20 90 ex 2932 20 90 ex 2932 19 00 *ex 2932 20 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 51
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2016 31.12.2016 31.12.2017 31.12.2019 31.12.2018 31.12.2020 31.12.2018 31.12.2018 31.12.2020 31.12.2016 31.12.2016 31.12.2016 31.12.2019 31.12.2019 31.12.2018 31.12.2020 Unit Supplementary ------
duty Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 -glucitol (CAS RN 32647-67-9) D -1,5-benzodioxepin-3-one (CAS RN 28940-11-6) H tolyl-5-pyrazolone (CAS RN tolyl-5-pyrazolone 86-92-0) -Benzylidene- -p- bis-O Description Decahydro-3a,6,6,9a-tetramethylnaphth [2,1-b] furan-2 (1H)-one (CAS RN 564-20-5) RN (CAS (1H)-one 22781-23-3) 1222-05-5) furan-2 RN RN [2,1-b] (CAS % (CAS RN 77-06-5) (CAS with a minimum purity by acid weight of 88 Gibberellic Decahydro-3a,6,6,9a-tetramethylnaphth (ISO) 6413-10-1) 862574-88-7) 8-hexamethylindeno[5,6-c]pyran Bendiocarb RN RN 1,3,4,6,7,8-Hexahydro-4,6,6,7,8, (CAS (CAS Ethyl-2-methyl-1,3-dioxolane-2-acetate acid 4265-27-4) 1-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic RN (CAS 24388-70-3) 99199-60-7) % or more (CAS RN 26225-79-6)(ISO) Ethofumesate with a purity by weight of 97 2-Butylbenzofuran RN RN 7-Methyl-3,4-dihydro-2 (CAS (CAS 1,3-Dihydro-1,3-dimethoxyisobenzofurane acid 57280-22-5) 6-Fluoro-3,4-dihydro-2H-1-benzopyran-2-carboxylic RN (CAS 4,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane 1205-17-0) RN 81541-12-0) 1,3:2,4- (CAS RN 176969-34-9) 3-(3,4-Methylenedioxyphenyl)-2-methylpropanal (CAS RN 1,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS 191614-02-5) acid RN % or more (CAS RN 365400-11-9)(ISO) Pyrasulfotole with a purity by weight of 96 3-Difluoromethyl-1-methyl-1H-pyrazole-4-carboxylic (CAS 3-Methyl-1 fluoride 1,3-Dimethyl-5-fluoro-1H-pyrazole-4-carbonyl 80 84 10 15 20 25 43 45 50 53 55 65 70 75 80 15 25 30 35 TARIC CN code ex 2932 99 00 ex 2932 99 00 ex 2932 20 90 ex 2932 99 00 ex 2932 99 00 ex 2932 99 00 ex 2932 99 00 ex 2932 99 00 ex 2932 99 00 ex 2932 99 00 ex 2932 99 00 ex 2932 99 00 ex 2932 99 00 ex 2933 19 90 ex 2933 19 90 ex 2933 19 90 ex 2932 20 90 *ex 2932 99 00 *ex 2933 19 90
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 52
review mandatory End date for End date
31.12.2018 31.12.2019 31.12.2019 31.12.2018 31.12.2017 31.12.2017 31.12.2020 31.12.2016 31.12.2020 31.12.2016 31.12.2016 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -pyrazol-1-yl)benzenesulphonic acid (CAS RN acid 119-17-5) -pyrazol-1-yl)benzenesulphonic H
-(1-benzyl-5-ethoxy-3-hydantoinyl)-2-chloro-5-dodecyloxycarbonylacet α Hydroxyphenylhydantoin (CAS RN 2420-17-9) RN Hydroxyphenylhydantoin (CAS
-p- -(4-Methoxybenzoyl)- 16-5) α anilide, (CAS RN 70950-45-7) Description Edaravone (INN) (CAS RN 89-25-8) RN 134098-61-6) (CAS RN 129630-19-9) (INN) (CAS RN Edaravone (ISO) (CAS 155601-30-2) Fenpyroximate (ISO) RN 473799- Pyraflufen-ethyl (CAS RN 32718-18-6) 4,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate (CAS RN 3-(4,5-Dihydro-3-methyl-5-oxo-1 5-amino-4-(2-methylphenyl)-3-oxo-2,3-dihydro-1H-1-pyrazolcarbothioate 16079-88-2)/(CAS Allyl RN 2827-56-7) (CAS RN % or more (CAS RN Iprodione 36734-19-7)(ISO) with a purity by weight of 97 1-Bromo-3-chloro-5,5-dimethylhydantoin (CAS hydrochloride 1-Aminohydantoin 77-71-4) 144689-93-0) DL RN RN 67747-09-5) (CAS (CAS RN 156065-03-1) 5,5-Dimethylhydantoin 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate (CAS 33016-47-6) 68694-11-1) RN Ethyl (ISO) RN RN (CAS Prochloraz (CAS (CAS (ISO) 1-Trityl-4-formylimidazole (ISO) chloride 80-73-9) Triflumizole copper RN Prochloraz (CAS 1,3-Dimethylimidazolidin-2-one 40 50 60 70 80 85 35 50 55 60 70 80 15 25 35 40 45 50 TARIC CN code ex 2933 21 00 ex 2933 21 00 ex 2933 19 90 ex 2933 19 90 ex 2933 19 90 ex 2933 19 90 ex 2933 19 90 ex 2933 21 00 ex 2933 21 00 ex 2933 29 90 ex 2933 29 90 ex 2933 29 90 ex 2933 29 90 ex 2933 29 90 ex 2933 29 90 ex 2933 19 90 *ex 2933 21 00 *ex 2933 21 00
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 53
review mandatory End date for End date
31.12.2019 31.12.2016 31.12.2020 31.12.2016 31.12.2017 31.12.2019 31.12.2019 31.12.2017 31.12.2020 31.12.2020 31.12.2018 31.12.2020 31.12.2020 31.12.2017 Unit Supplementary ------
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 )-1-phenylethyl]-2-azabicyclo[2.2.1]hept-5-ene-3-carboxylate (CAS RN )-1-phenylethyl]-2-azabicyclo[2.2.1]hept-5-ene-3-carboxylate R )-2-[(1 R ,4 )-5-[(benzyloxy)amino]piperidine-2-carboxylate dihydrochloride (CAS RN 1501976- )-5-[(benzyloxy)amino]piperidine-2-carboxylate S
R ,3 ,5 S S
34-6) 130194-96-6) Description 1-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea (CAS RN 52378-40-2) RN 1007882-59-8) (CAS RN % or more (CAS RN Fenamidone 161326-34-7)(ISO) with a purity by weight of 97 1-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea (CAS 120116-88-3) 2-(5-bromo-1H-imidazol-2-yl)pyrrolidine-1-carboxylate RN 35554-44-0) (S)-tert-Butyl (CAS RN (ISO) (CAS Cyazofamid (ISO) 153259-31-5) Imazalil RN 2402-77-9) 1228879-37-5) hydrochloride(CAS RN RN 2-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine (CAS (CAS 2,3-Dichloropyridine (1:2) (1 hydrochloride 89-00-9) Methyl 3-piperidinamine RN N,4-Dimethyl-1-(phenylmethyl)- (CAS acid Pyridine-2,3-dicarboxylic 591-22-0) (2 RN Methyl (CAS 27048-04-0) 3,5-Dimethylpyridine RN (CAS 6-Chloro-3-nitropyridin-2-ylamine Fluroxypyr (ISO) methyl ester (CAS RN 69184-17-4) RN (CAS ester 55 methyl 60 65 (ISO) 70 80 Fluroxypyr 11 12 13 14 15 16 17 18 TARIC CN code 2933 39 50 2933 39 ex 2933 29 90 ex 2933 29 90 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 29 90 ex 2933 29 90 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 29 90
M5 M4 M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 54
review mandatory End date for End date
31.12.2020 31.12.2020 31.12.2019 31.12.2019 31.12.2020 31.12.2019 31.12.2018 31.12.2020 31.12.2019 31.12.2019 31.12.2016 31.12.2019 31.12.2018 31.12.2016 Unit Supplementary ------
duty Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 Description Methyl nicotinate (INNM) (CAS RN 93-60-7) RN (CAS 14915-37-8) (INNM) RN nicotinate (CAS 188425-85-6) Methyl powder RN 55-22-1) pyrithione (CAS RN Copper (ISO) (CAS Boscalid acid 6602-54-6) Isonicotinic RN 86604-75-3) (CAS RN 81335-77-5) 2-Chloro-3-cyanopyridine (CAS RN hydrochloride (CAS 1802485-62-6) 2-Chloromethyl-4-methoxy-3,5-dimethylpyridine (ISO) RN Imazethapyr (CAS dihydrochloride 212322-56-0) 3811-73-2) 2-[4-(Hydrazinylmethyl)phenyl]-pyridine RN 127337-60-4) 72830-09-2) RN (CAS RN RN (CAS Ethyl-3-[(3-amino-4-methylamino-benzoyl)-pyridin-2-yl-amino]-propionate hydrochloride(CAS (CAS 157764-10-8) 150114-71-9) salt 2-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine hydrochloride RN RN sodium 2-(Chloromethyl)-3,4-dimethoxypyridine (CAS (CAS pyridine-2-thiol-1-oxide, 3-Chloro-(5-trifluoromethyl)-2-pyridineacetonitrile (ISO) of Aminopyralid solution Aqueous 19 20 21 22 23 24 25 26 28 31 32 34 35 37 TARIC CN code ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 *ex 2933 39 99
M5 M4 M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 55
review mandatory End date for End date
31.12.2018 31.12.2016 31.12.2019 31.12.2016 31.12.2019 31.12.2016 31.12.2018 31.12.2019 31.12.2017 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2016 31.12.2016 31.12.2018 Unit Supplementary ------
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -benzimidazole (CAS RN 102625- -benzimidazole H 0 % 0 0 % 0
0 % 0 0 % 0 -methylpiperidine (CAS RN 105812-81-5) N 0 % 0 0 % 0 0 % 0 0 % % 0 0
Butyl 3-(6-bromo-1H-benzo[d]imidazol-2-yl)-2-azabicyclo[2.2.1]heptane-2- Butyl 3-(6-bromo-1H-benzo[d]imidazol-2-yl)-2-azabicyclo[2.2.1]heptane-2- -Fluorophenyl)-3-hydroxymethyl- ′ -tert- 4-(4
butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0) (CAS butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate trans- -Fluoro-2,6-dichloropyridinium tetrafluoroborate (CAS RN 140623-89-8) (CAS tetrafluoroborate -Fluoro-2,6-dichloropyridinium 64-9) carboxylate (CAS RN 1256387-74-2) Description 2-Chloropyridine (CAS RN 109-09-1) RN 768-66-1) (CAS RN 2-Chloropyridine (CAS 2,2,6,6-Tetramethylpiperidine 158062-67-0) RN 5-Difluoromethoxy-2-[[(3,4-dimethoxy-2-pyridyl)methyl]thio]-1 (CAS (-)- (ISO) 626-55-1) Flonicamid RN N (CAS 3-Bromopyridine 5570-77-4) RN 94239-04-0) 326476-49-7) or more % (CAS RN 95737-68-1) Pyriproxyfen (ISO) purity by of a weight of 97 Tert- (CAS RN RN 135410-20-7) 4-Chloro-1-methylpiperidine (CAS (CAS RN 2-Fluoro-6-(trifluoromethyl)pyridine hydrochloride (CAS 2-Aminomethyl-3-chloro-5-trifluoromethylpyridine (ISO) 69045-84-7) Acetamiprid RN 120014-30-4) (1R,3S,4S) 114311-32-9) (CAS RN RN 2,3-Dichloro-5-trifluoromethylpyridine (CAS (CAS 5,6-Dimethoxy-2-[(4-piperidinyl)methyl]indan-1-one (ISO) Imazamox 40 42 45 47 48 50 53 55 57 58 60 63 65 67 70 72 77 TARIC CN code ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 *ex 2933 39 99
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 56
review mandatory End date for End date
31.12.2020 31.12.2018 31.12.2018 31.12.2017 31.12.2019 31.12.2020 31.12.2020 31.12.2020 31.12.2020 31.12.2018 31.12.2018 31.12.2016 31.12.2019 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
100276-65-1) Description 2-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3) 90717-03-6) RN RN 117-57-7) (CAS (CAS RN 52980-28-6) 2-Chloro-5-chloromethylpyridine (ISO) (CAS RN Quinmerac acid (CAS 86-98-6) 3-Hydroxy-2-methylquinoline-4-carboxylic 4-oxo-1,4-dihydroquinoline-3-carboxylate RN 94695-52-0) Ethyl (CAS RN 4,7-Dichloroquinoline (CAS acid 91-22-5) 1-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic RN (CAS 0141126-3)- 119-65-3) Quinoline (CUS RN 148-24-3) [1-(4-Benzyloxy-benzyl)-2-cyclobutylmethyl-octahydro-isoquinoline-4a,8a-diol] (CAS 67-52-7) RN RN Isoquinoline RN (CAS (CAS (CAS Quinolin-8-ol 6,7,8-trifluoro-1-[formyl(methyl)amino]-4-oxo-1,4-dihydroquinoline-3-carboxylate acid) 6642-31-5) Ethyl 654671-77-9) (barbituric RN 42487-72-9) RN Malonylurea (CAS RN (CAS 6-Amino-1,3-dimethyluracil (CAS monohydrate 2-Diethylamino-6-hydroxy-4-methylpyrimidine phosphate Sitagliptin 85 10 20 30 40 50 30 35 40 70 80 10 10 13 15 TARIC CN code ex 2933 49 10 ex 2933 49 10 ex 2933 49 10 ex 2933 49 10 ex 2933 49 10 ex 2933 49 90 ex 2933 49 90 ex 2933 52 00 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 *ex 2933 49 90 *ex 2933 39 99 *ex 2933 49 90 *ex 2933 49 90
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 57
review mandatory End date for End date
31.12.2018 31.12.2020 31.12.2018 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2019 31.12.2019 31.12.2019 31.12.2020 31.12.2019 31.12.2020 31.12.2020 31.12.2018 31.12.2019 31.12.2018 31.12.2016 Unit Supplementary ------
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 ]pyrimidine (CAS RN 7139-02-8) 0 % 0 d
-(4,6-Dichloropyrimidine-2,5-diyl)diformamide (CAS -(4,6-Dichloropyrimidine-2,5-diyl)diformamide RN 116477-30-6) ′ N , (CAS RN 63422-71-9) -(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine 89-8) 55-6) Description 1-Methyl-3-phenylpiperazine (CAS RN 5271-27-2) RN N 156-83-2) (CAS RN 1-Methyl-3-phenylpiperazine 26661-13-2) (CAS RN 2,4-Diamino-6-chloropyrimidine 4318-56-3) (CAS RN 88110- N-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide 110235-47-7) (CAS RN RN (CAS 6-Chloro-3-methyluracil 213265-83-9) (CAS 2-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-3-hydroxypropylacetate 7365-45-9) 200938-58-5) RN (ISO) RN RN (CAS Mepanipyrim 61337-89-1) (CAS (CAS 4,6-Dichloro-5-fluoropyrimidine RN acid 6-Iodo-3-propyl-2-thioxo-2,3-dihydroquinazolin-4(1H)-one 13349-82-1) (CAS 2-(4-(2-Hydroxyethyl)piperazin-1-yl)ethanesulfonic 1480-96-2) RN 1-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine 13223-43-3) RN (CAS 140681- RN (CAS % or more 2-(2-Piperazin-1-ylethoxy)ethanol (CAS RN 6-Methyl-2-oxoperhydropyrimidin-4-ylurea 94 1129-42-6) with a purity of RN (CAS 5-Fluoro-2-methoxypyrimidin-4(3H)-one (CAS 5,7-Dimethoxy(1,2,4)triazolo(1,5-a)pyrimidin-2-amine bis(tetrafluoroborate) 2,6-Dichloro-4,8-dipiperidinopyrimido[5,4- 86357-14-4) 1-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane RN (CAS N Triacetylganciclovir 17 18 20 21 23 27 30 33 37 43 45 47 50 53 57 60 65 70 72 TARIC CN code ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 *ex 2933 59 95 *ex 2933 59 95 *ex 2933 59 95
M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 58
review mandatory End date for End date
31.12.2019 31.12.2017 31.12.2020 31.12.2020 31.12.2020 31.12.2020 31.12.2016 31.12.2016 31.12.2018 31.12.2020 31.12.2020 31.12.2018 31.12.2019 31.12.2018 31.12.2017 31.12.2018 31.12.2019 31.12.2020 Unit Supplementary ------
duty 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 -1,2,4-triazol-1- H 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN L-(+)-tartrate, -[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide N )- S 754186-36-2) yl)butan-2-ol hydrochloride, (CAS RN 188416-20-8) 762240-92-6) Description 3-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN (CAS (1:1) pyrimidin-4-yl)-2-(2,4-difluorophenyl)-1-(1 37640-57-6) (2R,3S/2S,3R)-3-(6-Chloro-5-fluoro hydrochloride RN 3-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine (CAS 1,3,5-Triazinane-2,4,6-trione-1,3,5-triazine-2,4,6-triamine(1:1) 3140-73-6) RN 91-76-9) (CAS % or more (CAS RN 21087-64-9) (ISO) Metribuzin with a purity by weight of 93 2893-78-9) 20208-95-1) RN 2-Chloro-4,6-dimethoxy-1,3,5-triazine RN RN (CAS (CAS (CAS Benzoguanamine 886-50-0) 52434-90-9) (INNM) monophosphate 17766-26-6) 108-80-5) RN RN sodium 1,3,5-Triazine-2,4,6-triamine RN RN (CAS (CAS Troclosene 41394-05-2) (CAS (CAS (ISO) 1,3,5-Tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione RN salt acid Terbutryn 839-90-7) (CAS trisodium Cyanuric 7529-16-0) RN (ISO) 1,3,5-Triazine-2,4,6(1H,3H,5H)-trithione, 81-85-6) RN (CAS Metamitron 64744-50-9) RN (CAS Tris(2-hydroxyethyl)-1,3,5-triazinetrione RN (CAS 5-Vinyl-2-pyrrolidone (CAS 6-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione 3,3-Pentamethylene-4-butyrolactam ( 75 77 10 13 15 17 25 40 50 55 60 65 75 80 30 50 60 70 TARIC CN code ex 2933 69 80 ex 2933 69 80 ex 2933 69 80 ex 2933 59 95 ex 2933 69 80 ex 2933 69 80 ex 2933 69 80 ex 2933 69 80 ex 2933 69 80 ex 2933 79 00 ex 2933 79 00 ex 2933 79 00 ex 2933 59 95 *ex 2933 69 80 *ex 2933 69 80 *ex 2933 69 80 *ex 2933 69 80 *ex 2933 79 00
M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 59
review mandatory End date for End date
31.12.2018 31.12.2019 31.12.2019 31.12.2016 31.12.2018 31.12.2018 31.12.2020 31.12.2020 31.12.2017 31.12.2019 31.12.2018 31.12.2020 31.12.2017 31.12.2019 31.12.2017 31.12.2020 31.12.2019 Unit Supplementary ------
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -phenylaniline] (CAS RN 67707-04-4)
N
0 % 0 -methyl- 0 % 0 N 0 % 0 butylphenol (CAS RN 3846-71-7) RN butylphenol (CAS RN 25973-55-1) pentylphenol (CAS
-tert- -tert- -benzimidazol-2-one (CAS RN 55621-49-3) H -dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4) N , N )-Methyl 4-(3-(1,1-difluorobut-3-enyl)-7-methoxyquinoxalin-2-yloxy)-3-ethylpyrrolidine-2- )-Methyl 4-(3-(1,1-difluorobut-3-enyl)-7-methoxyquinoxalin-2-yloxy)-3-ethylpyrrolidine-2- R ,4 -Benzotriazol-2-yl)-4,6-di -Benzotriazol-2-yl)-4,6-di 70321-86-7) RN (CAS -Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol S H H H -[(9-Butyl-9H-carbazol-3-yl)methylene]bis[ ,3 ′ S phate(V) (CAS RN 148893-10-1) carboxylate 4-methylbenzenesulfonate (CUS 0143289-9) Description Fenbuconazole (ISO) (CAS RN 114369-43-6) 88671-89-0) RN RN (CAS 97963-62-7) (CAS (ISO) 2-(2 RN (ISO) Fenbuconazole 98809-58-6) (CAS Myclobutanil RN 5-Difluoromethoxy-2-mercapto-1-H-benzimidazole 2-(2H-benzotriazol-2-yl)-4-methyl-6-(2-methylprop-2-en-1-yl)phenol(CAS 2-(2 112281-82-0) % or more RN (ISO)(CAS 55512-33-9) Pyridate with a purity by weight of 90 RN more % or (CAS RN 128639-02-1) (ISO) with a purity by Carfentrazone-ethyl weight of 93 (CAS 4,4 2-(2,4-Dichlorophenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-ol 2-(2 hexafluorophos 3-oxide 1-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium (2S)-2-Benzyl- 1,3-Dihydro-5,6-diamino-2 % or more (CAS RN Tebuconazole 107534-96-3) (ISO) with a purity by weight of 95 582-60-5) (2 RN (CAS 5,6-Dimethylbenzimidazole 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 26 27 TARIC CN code ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80
M5 M4 M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 60
review mandatory End date for End date
31.12.2017 31.12.2020 31.12.2018 31.12.2020 31.12.2019 31.12.2019 31.12.2018 31.12.2017 31.12.2018 31.12.2017 31.12.2018 31.12.2020 31.12.2018 31.12.2020 31.12.2019 31.12.2018 31.12.2018 31.12.2016 31.12.2018 Unit Supplementary ------
duty 0 % Rate of autonomous 0 % 0
) 5 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 3.2% 0 % 0 0 % 0 ] [1,4]diazepin-11-one (CAS RN 50892-62-1) 0 % 0 b,e -dibenzo [ H butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CUS 0133723-1) ( (CUS 0133723-1) butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate tert- -pyrrole[3,2,1-ij]quinoline (CAS RN -pyrrole[3,2,1-ij]quinoline 5840-01-7) ethyl (ISO) (CAS ethyl (ISO) RN 100646-51-3) H 4-Hydroxy-L-proline methyl ester (CAS RN 74844-91-0) 4-Hydroxy-L-proline methyl ester
-P- trans- 4-Hydroxy-L-proline (CAS RN 51-35-4) 4-Hydroxy-L-proline -(2,3-Dihydro-2-oxo-1H-benzimidazol-5-yl)-3-hydroxynaphthalene-2-carboxamide (CAS RN (CAS -(2,3-Dihydro-2-oxo-1H-benzimidazol-5-yl)-3-hydroxynaphthalene-2-carboxamide -Boc- 26848-40-8) Description 3-[3-(4-Fluorophenyl)-1-(1-methylethyl)-1H-indol-2-yl]-(E)-2-propenal (CAS RN 93957-50-7) N RN (CAS 3-[3-(4-Fluorophenyl)-1-(1-methylethyl)-1H-indol-2-yl]-(E)-2-propenal 66246-88-6) Quizalofop RN (CAS 123-33-1) (ISO) % or more (CAS RN 55219-65-3)(ISO) Triadimenol with a purity by weight of 97 RN Penconazole 76738-62-0) (CAS 8-Chloro-5,10-dihydro-11 125116-23-6) RN (ISO) trans- RN (CAS hydrazide 2,3-Dihydro-1 (CAS (ISO) Maleic (ISO) Paclobutrazol 96489-71-3) 36411-52-6) Metconazole 139481-58-6) RN RN (S)-5-( N RN 1670-82-2) 608-07-1) (CAS (CAS Potassium (CAS RN RN (ISO) 3-(Salicyloylamino)-1,2,4-triazole (INNM) (CAS (CAS Pyridaben 4698-11-7) ester acid 2-(5-Methoxyindol-3-yl)ethylamine RN ethyl 1H-Indole-6-carboxylic (CAS Candesartan 10-Methoxyiminostilbene 28 29 30 31 33 37 40 43 45 47 50 52 53 54 55 57 62 67 71 TARIC CN code ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 *ex 2933 99 80 *ex 2933 99 80
M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 61
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2016 31.12.2018 31.12.2018 31.12.2018 31.12.2017 31.12.2018 31.12.2017 31.12.2017 31.12.2018 31.12.2019 31.12.2019 31.12.2016 31.12.2016 31.12.2016 31.12.2016 31.12.2017 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 (2-benzothiazolylthio)-2-oxoethylidene]amino]oxy]-acetic acid, (2-benzothiazolylthio)-2-oxoethylidene]amino]oxy]-acetic -methylmethanamine dihydrochloride (CAS RN 1185167-55-8)
N
butoxycarbonylaminothiazol-4-yl)-2-pentenoic acid (CAS RN 86978-24-7) butoxycarbonylaminothiazol-4-yl)-2-pentenoic
-tert- (CAS RN 1247119-36-3) 89604-91-1) (CAS RN 246035-38-1)methyl ester 104797-47-9) Description 3-Amino-3-azabicyclo (3.3.0) octane hydrochloride (CAS RN 58108-05-7) RN 18087-70-2) (CAS RN hydrochloride (CAS 95-14-7) octane pyridazine-hydrochloride 1,4,7-Trimethyl-1,4,7-Triazacyclononane 10605-21-7) 29385-43-1) RN (3.3.0) Imidazo[1,2-b] 144163-97-3) 78587-05-0) RN RN (CAS 3-Amino-3-azabicyclo RN RN (CAS (CAS 1,2,3-Benzotriazole (CAS (CAS (ISO) Tolytriazole 137-00-8) carbonate (ISO) Carbendazim RN thiazol-5-ylmethyl Hexythiazox (CAS 4-Nitrophenyl 2-(4-Methylthiazol-5-yl)ethanol oxalate (S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate 372092-18-7) 98886-44-3) 26364-65-8) RN RN RN (2-Isopropylthiazol-4-yl)- (CAS (CAS (CAS (Z)-2-(2 hydrochloride 18480-53-0) (ISO) 2-Cyanimino-1,3-thiazolidine RN RN chloride, Fosthiazate (CAS 2634-33-5) (CAS 2-(Formylamino)-4-thiazoleacetyl (2Z)-(5-amino-1,2,4-thiadiazol-3-yl)(methoxyimino)ethanethioate RN 3,4-Dichloro-5-carboxyisothiazole (CAS S-1,3-Benzothiazol-2-yl (BIT)) 2-[[(Z)-[1-(2-Amino-4-thiazolyl)-2- (Benzisothiazolinone RN 1,2-Benzisothiazol-3(2H)-one (CAS S-(1,3-Benzothiazol-2-yl)-(Z)-2-(2-aminothiazol-4-yl)-2-(acetyloxyimino)thioacetate, 72 74 78 81 82 89 10 15 20 25 35 40 45 60 70 80 20 30 40 50 TARIC CN code ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2934 10 00 ex 2934 10 00 ex 2934 10 00 ex 2934 10 00 ex 2934 10 00 ex 2934 10 00 ex 2934 10 00 ex 2934 10 00 ex 2934 10 00 ex 2934 10 00 ex 2934 20 80 ex 2934 20 80 ex 2934 20 80 ex 2934 20 80 ex 2933 99 80
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 62
review mandatory End date for End date
31.12.2020 31.12.2020 31.12.2017 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2017 31.12.2018 31.12.2019 31.12.2016 31.12.2017 31.12.2019 31.12.2019 31.12.2017 31.12.2016 31.12.2019 31.12.2020 Unit Supplementary ------
duty 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 4-methylcyclohexyl)carbonyl]amino}-5-iodothiophene- 0 % 0
trans- 0 % 0 0 % 0 -pyridin-2-yl-b-alaninate (CAS RN 872728-84-2) N
-thioxanthen-9-one (CAS RN 82799-44-8) -{[1-methyl-2-({[4-(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-yl)phenyl]amino}methyl)-1H- -{[1-methyl-2-({[4-(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-yl)phenyl]amino}methyl)-1H- H N -Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN -Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine 3741-80-8) N , 2-carboxylate (CAS RN 1026785-65-8) benzimidazol-5-yl]carbonyl}- 87563-89-1) RN one (CAS Description Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3) RN (CAS 7643-08-5) 864731-61-3) Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate RN RN N (CAS (CAS 110488-70-5) 2-Methylthiophenothiazine (INN) RN Fluralaner 3-{1,4-dioxaspiro[4.5]dec-8-yl[( (CAS Methyl (ISO) 5234-68-4) Dimethomorph RN 119446-68-3) (CAS RN % or more (CAS RN 953030-84-7) of a purity by Buprofezin weight of 98,5 (ISO) Ethyl (ISO) (CAS 122188-02-7) Carboxin (ISO) RN 50292-95-0) 329216-67-3) Difenoconazole (CAS RN RN Methyl(1,8-diethyl-1,3,4,9-tetrahydropyrano[3,4-b]indol-1-yl)acetate (CAS (CAS 110-02-1) 3,3-bis(2-Methyl-1-octyl-1H-indol-3-yl)phthalide ethanol RN 2-[4-(Dibenzo[b,f][1,4]thiazepin-11-yl)piperazin-1-yl] (CAS Thiophene furo[3,4-b]pyridin-5(7H)- 7-[4-(Diethylamino)-2-ethoxyphenyl]-7-(2-methyl-1-octyl-1H-indol-3-yl) (CAS RN % or more 116255-48-2) with a purity by Bromuconazole weight of 96 (ISO) % or more (CAS RN 142459-58-3) (ISO) Flufenacet with a purity by weight of 95 2,4-Diethyl-9 60 70 10 10 11 12 13 14 15 16 17 18 19 20 22 23 24 25 TARIC CN code ex 2934 30 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 *ex 2934 20 80 *ex 2934 20 80 *ex 2934 99 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 63
review mandatory End date for End date
31.12.2019 31.12.2019 31.12.2016 31.12.2019 31.12.2020 31.12.2020 31.12.2020 31.12.2018 31.12.2020 31.12.2017 31.12.2020 31.12.2020 31.12.2020 31.12.2019 31.12.2016 31.12.2020 31.12.2018 Unit Supplementary ------
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0
-acetylgalactosamine disodium salt (CAS RN 91183-98-1) N -diphospho- (CAS RN -diphosphoglucuronic63700-19-6) salt acid trisodium ′ ′ one (CAS RN 69898-40-4) RN one (CAS Description 4-Methylmorpholine 4-oxide in an aqueous solution (CAS RN 7529-22-8) RN (CAS solution aqueous an 111974-74-4) 63676-22-2) in RN RN 4-oxide 3159-07-7) (CAS (CAS 4-Methylmorpholine RN dihydrochloride 2-(4-Hydroxyphenyl)-1-benzothiophene-6-ol (CAS 11-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine 5 Dibenzo[b,f][1,4]thiazepin-11(10H)-one 87674-68-8) 5 Uridine RN Uridine (CAS 7-[4-(Diethylamino)-2-ethoxyphenyl]-7-(1-ethyl-2-methyl-1H-indol-3-yl)furo[3,4-b]pyridin-5(7H)- (ISO) Dimethenamide 1004-14-4) RN (CAS % or more (CAS RN Oxadiazon 19666-30-9) (ISO) with a purity by weight of 95 51997-51-4) 4-Propan-2-ylmorpholine 352232-17-8) RN 144750-42-5) 5117-12-4) RN (CAS RN RN (CAS 4-(Oxiran-2-ylmethoxy)-9H-carbazole % or more (CAS RN Clomazone 81777-89-1) (ISO) with a purity by weight of 96 (CAS (CAS 11-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine hydrochloride 1-(Morpholin-4-yl)prop-2-en-1-one acid Clopidogrel 2451-62-9) RN (CAS % or more (CAS RN Propiconazole 60207-90-1) (ISO) with a purity by weight of 92 Tris(2,3-epoxypropyl)-1,3,5-triazinanetrione 26 27 28 30 31 32 34 35 36 37 38 39 41 42 43 44 45 TARIC CN code ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 *ex 2934 99 90 *ex 2934 99 90 *ex 2934 99 90
M5 M4 M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 64
review mandatory End date for End date
31.12.2016 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2017 31.12.2016 31.12.2016 31.12.2016 31.12.2018 31.12.2019 31.12.2019 31.12.2020 31.12.2020 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2016 31.12.2018 31.12.2016 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -thieno[2,3-b][1,5]benzodiazepine (1:2) H
0 % 0 0 % 0 -thioxanthenium hexafluorophosphate, RN (CAS H 0 % 0 0 % 0 0 % 0 0 % 0
ino]imidazolidine-2,4-dione (CAS RN 1672-88-4) butyl-1,3-benzoxazole) (CAS RN 7128-64-5) -tert-
-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate (CAS RN -pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate 125971-95-1) H -Biphenyl]-4-yl-2-(1-methylethyl)-9-oxo-9 ′ )-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)car -(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4) (CAS -(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) ′ R-cis -[4-(2-Chloroacetyl)phenyl]methanesulphonamide (CAS RN 64488-52-4) (CAS -[4-(2-Chloroacetyl)phenyl]methanesulphonamide dihydrate (CAS RN 864743-41-9) 591773-92-1) 2,5-Thiophenediylbis(5 147118-40-9) RN yl}-3,5-dihydroxyhept-6-enoate (CAS bonyl]-1 Description DL-Homocysteine thiolactone hydrochloride (CAS RN 6038-19-3) 2-methyl-4-(4-methylpiperazin-1-yl)-10 RN – (CAS Propan-2-ol 126-33-0) hydrochloride 10-[1,1 RN thiolactone 5495-84-1) (CAS DL-Homocysteine RN Tetrahydrothiophene-1,1-dioxide (CAS 1-[3-(5-Nitro-2-furyl)allylideneam 888504-28-7) 2-Isopropylthioxanthone (4 RN 5402-55-1) (CAS RN 5-methyl-1,3,4-oxadiazole-2-carboxylate 3347-22-6) (CAS Potassium RN Thiophen-2-ethanol 145701-23-1) (CAS 144740-54-5) RN (ISO) % or more (CAS RN 103361-09-7) Flumioxazin (ISO) of a purity by weight of 96 RN (CAS Dithianon % or more (CAS RN 153233-91-1) Etoxazole (ISO) of a purity by weight of 94,8 120279-88-1) (CAS (ISO) 2,2 RN (ISO) Florasulam 126535-15-7) (CAS Flupyrsulfuron-methyl-sodium RN 6-Methyl-4-oxo-5,6-dihydro-4H-thieno[2,3-b]thiopyran-2-sulfonamide (CAS Toluenesulphonamides (ISO) N (3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino]pyrimidin-5- Triflusulfuron-methyl Methyl 76 10 48 50 60 66 72 74 75 77 79 83 84 86 87 10 15 17 20 23 25 27 TARIC CN code ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 3204 20 00 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2935 00 90 ex 2935 00 90 ex 2935 00 90 ex 2935 00 90 ex 2935 00 90 ex 2935 00 90 ex 2935 00 90 ex 2934 99 90 *ex 2934 99 90 *ex 2934 99 90 *ex 2934 99 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 65
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2016 31.12.2020 31.12.2019 31.12.2018 31.12.2019 31.12.2016 31.12.2018 31.12.2020 31.12.2019 31.12.2020 31.12.2018 31.12.2020 Unit Supplementary ------
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
) 5 -(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1) ′
)-1-Amino-2-(difluoromethyl)-N-(1-methylcyclopropylsulphonyl) cyclopropanecarboxamide cyclopropanecarboxamide )-1-Amino-2-(difluoromethyl)-N-(1-methylcyclopropylsulphonyl) R -Oxydi(benzenesulphonohydrazide) (CAS RN 80-51-3) ,2 ′ R -Fluorobenzenesulphonimide (CAS RN 133745-75-2) RN -Fluorobenzenesulphonimide (CAS 3,5-dihydroxyhept-6-enoic acid – 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1) (CAS RN (CAS (1:1) 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine – 3,5-dihydroxyhept-6-enoic acid 1235588-99-4) ( 0143290-2) hydrochloride (CUS Description Chlorsulfuron (ISO) (CAS RN 64902-72-3) RN (CAS (ISO) N Chlorsulfuron 219714-96-2) 19044-88-3) RN (CAS RN % or more 122548-33-8) of a purity by Imazosulfuron (ISO), weight of 98 122931-48-0) RN (CAS RN (CAS (ISO) (CAS (ISO) Penoxsulam (ISO) Oryzalin Rimsulfuron (3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5-yl]- % or more (CAS RN 100784-20-1) Halosulfuron-methyl (ISO) with a purity by weight of 98 4,4 2736-23-4) RN (1 (CAS acid 79277-27-3) 2,4-Dichloro-5-sulphamoylbenzoic RN (CAS (ISO) % or more Propoxycarbazone-sodium (CAS RN 181274-15-7)(ISO) with a purity by weight of 95 Thifensulfuron-methyl N-(p-Toluenesulphonyl)-N 28 35 40 42 43 45 47 48 50 52 53 54 55 56 TARIC
CN code ex 2935 00 90 ex 2935 00 90 ex 2935 00 90 ex 2935 00 90 ex 2935 00 90 ex 2935 00 90 ex 2935 00 90 ex 2935 00 90 ex 2935 00 90 ex 2935 00 90 ex 2935 00 90 ex 2935 00 90 *ex 2935 00 90 *ex 2935 00 90 ______
M5 M4 M5 M4 M5 M4 M5 M4 ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 66
review mandatory End date for End date
31.12.2020 31.12.2020 31.12.2020 31.12.2019 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2016 31.12.2020 31.12.2018 31.12.2018 31.12.2016 31.12.2017 31.12.2018 31.12.2018 31.12.2020 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
-dimethyl-1,2,4-triazol-1-sulphonamide (CAS -dimethyl-1,2,4-triazol-1-sulphonamide N 0 % 0 , N 0 % 0 0 % 0 0 % 0 -pyrrol-1-yl)carbonyl]amino] ethyl]phenyl]sul H 0 % 0 toluidino)ethyl)methanesulphonamide sesquisulphate monohydrate (CAS sesquisulphate toluidino)ethyl)methanesulphonamide m-
-ethyl-
N
-[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide hydrochloride -[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide -(2-(4-Amino- fonyl]-carbamic acid ethyl ester, (CAS RN 318515-70-7) RN 25646-71-3) RN 348635-87-0) and formaldehyde (CAS RN ammonium chloride extract, mearnsii Reaction product of Acacia 85029-52-3) Description N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4) 669008-26-8) RN RN (CAS (CAS N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide 101200-48-0) 1-Methylcyclopropane-1-sulphonamide 74223-64-6) RN RN (CAS % by weight or more (CAS RN 104040-78-0)(ISO) Flazasulfuron with a purity of 94 (CAS (ISO) (ISO) Tribenuron-methyl % or more Nicosulphuron (CAS RN 111991-09-4)(ISO), of a purity by weight of 91 Metsulfuron-methyl [[4-[2-[[(3-Ethyl-2,5-dihydro-4-methyl-2-oxo-1 53956-04-0) N RN N 122397-96-0) 520-26-3) (CAS 3-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)- fruits 5490-27-7) RN RN glycyrrhizate myrobalan RN (CAS (CAS Ammonium and (CAS beta-D-glucopyranoside Hesperidin gambier nitrate sulphate Ethylvanillin from sodium Dihydrostreptomycin derived Natural extracts Tanning 40 10 57 58 59 63 65 75 77 85 88 89 10 10 extract 20 10 10 Wattle 20 TARIC
CN code 3201 20 00 3201 20 ex 2935 00 90 ex 3202 90 00 ex 2935 00 90 ex 2935 00 90 ex 2935 00 90 ex 2935 00 90 ex 2935 00 90 ex 2935 00 90 ex 2935 00 90 ex 2938 90 ex 2938 90 ex 2941 20 30 ex 3102 50 00 ex 3201 90 ex 2935 00 90 *ex 3201 90 *ex 2935 00 90 *ex 2938 90 30 ______
M4 M5 M5 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 67
review mandatory End date for End date
31.12.2018 31.12.2020 31.12.2019 31.12.2020 31.12.2016 31.12.2016 31.12.2016 31.12.2017 31.12.2017 31.12.2016 31.12.2017 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
toluidine (CAS RN 63741-10-6) m- -ethyl-
N
-methyl-2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2- N
-alanine (CAS RN 159010-67-0) -alanine (CAS RN 371921-34-5) β β -alanine (CAS RN 170222-39-6), and β -[5-(acetylamino)-4-[(2-chloro-4,6-dinitrophenyl)azo]-2-methoxyphenyl]- 2-oxo-2-(phenylme -[5-(acetylamino)-4-[(2-chloro-4,6-dinitrophenyl)azo]-2-methoxyphenyl]- -[4-[(2-cyano-4-nitrophenyl)azo]phenyl]- -[2-chloro-4-[(4-nitrophenyl)azo]phenyl]-2-[2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethoxy]- thoxy)ethyl- yl)ethyl- 2-oxoethyl- N N N -(2-Chloroethyl)-4-[(2,6-dichloro-4-nitrophenyl)azo]- colourant C.I. Disperse Blue 360 content of 99 % or more by % or weight Blue 360 colourant C.I. Disperse content of 99 % or more by weight Yellow 241 colourant C.I. Disperse content of 97 61, Orange Disperse — C.I. 291:1, Blue Disperse — C.I. 93:1, Violet Disperse — C.I. 54 Red Disperse — C.I. by % or more weight Red colourant C.I. Disperse 60 content of 50 % or more by weight Blue 72 95 colourant C.I. Disperse content of more by % or weight Blue 359 colourant C.I. Disperse content of 50 by % or more weight Red colourant C.I. Disperse 343 content of 95 — — — or more by % weight C.I. Acid Blue 9 content of 50 lamino)-1,3,5-triazin-2-yl)amino)-4-hydroxy-3-((4-((4-sulfophenyl)azo)phenyl)azo)-2-naphthalene sulfonate (CAS RN 145703-76-0) Description Colourant C.I. Disperse Yellow 241 (CAS RN 83249-52-9) and preparations based thereon with a with thereon based preparations and 83249-52-9) a RN with (CAS thereon a 241 based with Yellow preparations thereon Disperse a containing: and based C.I. with dyes, Colourant C.I. Disperse Blue 360 (CAS RN 70693-64-0) and preparations based thereon with a preparations 17418-58-5) Colourant thereon dispersion and RN based 81-48-1) of (CAS N preparations RN 60 Preparation colourant and (CAS Red a 99035-78-6) 72 Disperse with RN Blue C.I. thereon (CAS Disperse Colourant based C.I. 343 preparations Colourant Red and Disperse containing: 2650-18-2) C.I. non-ionogenic, Colourant C.I. Disperse Blue 359 (CAS RN 62570-50-7) and preparations based thereon with a Colourant RN preparation, (CAS Dye 9 Blue Acid C.I. Colourant % or more of disodium-7-((4-chloro-6-(dodecy Dye anionic, containing preparation, by weight 75 15 20 25 30 40 50 60 70 80 10 20 TARIC CN code ex 3204 11 00 ex 3204 11 00 ex 3204 11 00 ex 3204 11 00 ex 3204 11 00 ex 3204 11 00 ex 3204 12 00 ex 3204 12 00 ex 3204 11 00 *ex 3204 11 00 *ex 3204 11 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 68
review mandatory End date for End date
31.12.2017 31.12.2018 31.12.2018 31.12.2019 31.12.2020 31.12.2016 31.12.2017 31.12.2017 31.12.2017 31.12.2019 31.12.2019 31.12.2019 31.12.2019 31.12.2019 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
-diyldiazo)bis(6-(4-(3-(diethylamino)propylamino)-6-(3-(diethylam ′ butylanilino)anthraquinone-2-sulfonate (CAS RN butylanilino)anthraquinone-2-sulfonate 125328-86-1),
-tert- -Dioxidobiphenyl-4,4 ′ -(3,3 ′ — lithium-amino-4-(4 and 4403-90-1), RN (CAS 25 Green Acid — C.I. 4474-24-2) RN (CAS 80 Blue Acid — C.I. by % or more weight C.I. Acid Blue 80 content of 99 by % or more weight C.I. Acid Red 52 content of 97 more by % or weight C.I. Acid blue 25 content of 80 or more by % weight C.I. Basic Red 1 content of 50 % or more by weight C.I. Basic Blue 7 content of 50 % or more by weight 1 90 thereon with a colourant C.I. Basic Violet content of more by % or weight 11 colourant C.I Basic Violet content of 90 by % or more weight C.I Basic Red 1:1 content of 90 by % or more weight Black 80 content of 90 colourant C.I. Direct % or more by weight Blue 80 content of 90 colourant C.I. Direct by % or more weight Red 23 C.I. Direct content of 90 monio)propylamino)-1,3,5-triazin-2-ylamino)-3-sulfonato-1-naphtholato))dicopper(II) acetate lactate monio)propylamino)-1,3,5-triazin-2-ylamino)-3-sulfonato-1-naphtholato))dicopper(II) (CAS RN 159604-94-1) Description Colourant C.I. Acid Blue 80 (CAS RN 4474-24-2) and preparations based thereon with a colourant a colourant with a colourant thereon with a based thereon colourant with preparations based a thereon and containing: preparations with based 4474-24-2) anionic, and thereon colourant preparations RN preparation, 3520-42-1) based a and (CAS dye RN preparations with 6408-78-2) 80 Acid (CAS and thereon RN Blue 989-38-8) 52 based colourant (CAS Acid RN Red preparations a 25 a C.I. (CAS Acid and with with blue Colourant 12219-26-0) 182 (CAS RN Blue Acid dye C.I. acid containing anionic dye preparation Liquid 1 C.I. 2390-60-5) thereon thereon Acid Red Colourant a based RN based colourant C.I. Basic with preparations (CAS preparations a Colourant a C.I. and thereon 7 and with with 2390-63-8) based Colourant Blue thereon 3068-39-1) thereon RN preparations Basic based (2,2 RN based (CAS and preparations C.I. (CAS 11 preparations 8003-69-8) and Colourant Violet 1:1 RN and 12222-00-3) Basic (CAS Red 3441-14-3) RN C.I 80 Basic RN based CAS RN 8004-87-3) and preparations 1 (CAS RN 603-47-4 or Violet Colourant C.I. Basic (CAS Colourant Black C.I (CAS 80 Direct Colourant Blue 23 C.I. Direct Red Colourant C.I. Direct Colourant Colourant C.I. 30 40 50 60 70 10 20 30 40 50 60 10 20 30 TARIC CN code ex 3204 12 00 ex 3204 12 00 ex 3204 12 00 ex 3204 13 00 ex 3204 13 00 ex 3204 13 00 ex 3204 13 00 ex 3204 13 00 ex 3204 13 00 ex 3204 14 00 ex 3204 14 00 ex 3204 14 00 ex 3204 12 00 *ex 3204 12 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 69
review mandatory End date for End date
31.12.2017 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2019 31.12.2018 31.12.2016 31.12.2020 31.12.2019 31.12.2016 31.12.2019 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
0 % 0
0 % 0
disodium salt (CAS RN 250688-43-8), or disodium salt phooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1) phooxy)ethyl]sulfonyl]phenyl]azobenzoicsodium salt acid thereon with a colourant C.I. Vat Orange 7 (C.I.Pigment Orange 43) content of 20 % or more by thereon with a colourant C.I. Vat Orange 7 (C.I.Pigment Orange 43) content of 20 weight % or more by weight Vat Blue 4 content of 50 % by weight, and including one or but % or more not more than 75 Reactive Black 5 content of 60 more of the following: 27624-67-5), RN (CAS 201 Yellow Reactive — Colourant — 1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, — 3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sul more by % or weight 81 colourant C.I. Pigment Yellow content of 50 % or more by weight colourant C.I. orange 64 content of 90 % or more by weight 7 colourant C.I. Pigment Green content of 40 more by % or weight Colourant C.I. Pigment Red 49:2 content of 60 % or more by weight colourant C.I. Pigment Red 12 content of 35 by % or more weight colourant C.I. Pigment Blue 15:3 content of 35 Description Colourant C.I. Vat Blue 4 (CAS RN 81-77-6) and preparations based thereon with a colourant C.I. colourant a with thereon colourant based a preparations with and thereon 81-77-6) based RN preparations 2379-74-0) a (CAS and RN with 4 a 17095-24-8) (CAS thereon Blue with RN 1 based Vat thereon (CAS Red preparations C.I. based based Orange 43) (CAS RN 4424-06-0) and preparations Colourant C.I. Vat Orange 7 (C.I.Pigment a 5 Vat and Colourant preparations with Black C.I. 22094-93-5) thereon and a Reactive Colourant RN based 72102-84-2) with Colourant (CAS preparations RN thereon 7023-61-2) 81 and a (CAS based RN Yellow 1328-53-6) with 64 preparations a (CAS Pigment RN thereon Orange and with 48:2 C.I. (CAS based Pigment 1103-39-5) thereon Red Colourant 7 preparations RN C.I. based Pigment Green and (CAS Colourant preparations C.I. Pigment 6410-32-8) 49:2 and C.I. Colourant RN Red 147-14-8) Colourant (CAS Pigment RN 12 C.I. (CAS Red Colourant 15:3 Pigment Blue C.I. Pigment Colourant C.I. Colourant RN 211502-16-8RN 68516-75-6)CAS (CAS Brown 41 or Pigment C.I. Colourant 10 60 70 20 10 12 13 15 16 17 20 23 TARIC CN code ex 3204 17 00 ex 3204 17 00 ex 3204 15 00 ex 3204 15 00 ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 ex 3204 15 00 *ex 3204 16 00
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 70
review mandatory End date for End date
31.12.2016 31.12.2019 31.12.2020 31.12.2016 31.12.2019 31.12.2018 31.12.2016 31.12.2016 31.12.2018 31.12.2017 31.12.2017 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
or more, in the form of extruded beads with
colourant C.I. Pigment Yellow 14 content of 25 % or more by % or weight 14 colourant C.I. Pigment Yellow content of 25 of an organic dyestuff % or more by weight 95 by % or more weight colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight colourant C.I. Pigment Red 202 70 content of by % or more weight colourant C.I. Pigment Yellow 120 content of 50 % by weight with a purity of 98 disproportionate resin), % by weight content of not more than 1 a moisture % or more by weight colourant C.I. Pigment Red 53:1 content of 50 % or more by weight colourant C.I. Pigment Red 53 content of 50 % by weight. extruded beads, content of not more than 1 the form of with a moisture % or more by weight 80 5 colourant C.I. Pigment Orange content of % or more by weight colourant C.I. Pigment Red 207 50 content of Description Colourant C.I. Pigment Yellow 14 (CAS RN 5468-75-7) and preparations based thereon with a with thereon containing based thereon, a preparations based with and preparations a thereon 5468-75-7) a and with based RN with 147-14-8) thereon % preparations (CAS thereon based RN and 35 14 preparations based (CAS 147-14-8) (approx. Yellow and preparations 15:4 RN pigment Pigment a 3089-17-6) and (CAS Blue resinated C.I. with RN 15:1 29920-31-8) Pigment highly Colourant thereon a (CAS Blue RN C.I. based 78952-72-4), with 202 Pigment (CAS Colourant preparations thereon RN Red C.I. 120 and based (CAS Pigment Colourant Yellow 5160-02-1) preparations C.I. 174 Pigment and RN Colourant Yellow C.I. 2092-56-0) (CAS a Pigment RN Colourant 53:1 with C.I. (CAS a Red thereon Colourant 53 Pigment with based Red C.I. thereon preparations Pigment Colourant based and C.I. preparations 3468-63-1) Colourant and RN 71819-77-7) (CAS RN 5 % by weight or more, in Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) 98 with a purity of (CAS Orange 207 Pigment Red C.I. Pigment Colourant C.I. Colourant 25 27 33 35 40 45 60 65 67 75 80 TARIC
CN code ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 *ex 3204 17 00 *ex 3204 17 00 ______
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 71
review mandatory End date for End date
31.12.2017 31.12.2017 31.12.2019 31.12.2019 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
) )
5 5
)
5
)
5 0 % 0
) 5 ]chromen-7-yl)morpholine (CAS RN 1021540-64-6)]chromen-7-yl)morpholine f
)
5 ]indeno[2,1- h -(7-methoxy-11-phenyl-13, 13-dipropyl-3, 13-dihydrobenzo[h]indeno[2, 1- ′ derivatives (CAS RN 70879-65-1) colourant C.I. Pigment Blue 61 content of 35 % or more by % or more weight colourant C.I. Pigment Blue 61 content of 35 or more by % weight 3 content of 90 C.I. Pigment Violet based thereon with a colourant methyl % of 1-[[4-(phenylazo)phenyl]azo]naphthalen-2-ol % or more but not more than 40 — 35 842-07-9) RN (CAS 1-(phenylazo)naphthalen-2-ol of % 3 than more — not 2646-17-5) RN (CAS 1-[(2-methylphenyl)azo]naphthalen-2-ol of % 3 than more — not % of water but than 65 % or more not more — 55 fluoromethyl)-3,13-dihydrobenzo[ ( drobenzo[h]indeno[2,1-f]chromen-3-yl)phenoxy)ethyl) decanedioate (CUS 0133724-2) ( 3-yl)phenyl)morpholine (CUS 0133726-4) ( drobenzo[h]indeno[2,1-f]chromene-11-carbonitrile (CUS 0133725-3) ( 0133729-7) (CUS drobenzo[h]indeno[2,1-f]chromen-3-yl]phenoxy}ethyl) decanedioate ( (CUS 0133727-5) deno[2,1-f]chromen-3-yl)phenyl}piperidine f]chromene-3, 3-diyl)diphenol (CUS 0133728-6) ( f]chromene-3, 3-diyl)diphenol (CUS 0133728-6) Description Red colourant preparation, in a form of wet paste, containing by weight: by containing 205057-15-4) paste, RN wet (CAS of 49 form Violet a Colourant C.I. Pigment Blue 61 (CAS RN based thereon with a 1324-76-1) and preparations Solvent in C.I. CAS RN 101357-19-1) RN 1325-82-2 preparations and (CAS or 3 Violet C.I. Pigment Colourant preparation, Colourant colourant Red 13-dihy 4-(3-(4-butoxyphenyl)-6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-11-(tri 13-dipropyl-3, dye, bis(2-(4-(7-methoxy-3-(4-methoxyphenyl)-11-phenyl-13, Photochromic dye, 4-(4-(13,13-dimethyl-3,11-diphenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen- Photochromic dye, 3-(4-butoxyphenyl)-3-(4-fluorophenyl)-6,7-dimethoxy-13,13-dimethyl-3,13-dihy Photochromic dye, Photochromic 13-dihy bis(2-{4-[11-cyano-3-(4-fluorophenyl)-6,7-dimethoxy-13,13-dimethyl-3, 13-dihydrobenzo[h]in dye, Photochromic dye, 4, 4 1-{4-(6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-3, Photochromic dye, Photochromic 85 88 12 14 21 43 47 53 55 57 63 TARIC CN code ex 3204 17 00 ex 3204 19 00 ex 3204 19 00 ex 3204 19 00 ex 3204 19 00 ex 3204 19 00 ex 3204 19 00 ex 3204 19 00 ex 3204 19 00 ex 3204 19 00 ex 3204 17 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 72
review mandatory End date for End date
31.12.2018 31.12.2020 31.12.2020 31.12.2016 31.12.2017 31.12.2017 31.12.2016 31.12.2019 31.12.2018 31.12.2016 31.12.2018 31.12.2016 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
)
1 colourant C.I. Solvent Red 49:2 content of 90 % or more by weight colourant C.I. Solvent Red 49:2 90 content of or more by % weight colourant C.I. Solvent Brown 53 content of 95 % or more by weight colourant C.I. Solvent Blue 104 97 content of % or more by weight based thereon with a colourant C.I. Solvent Yellow 98 content of 95 % or more by weight colourant C.I. Solvent Blue 67 content of 98 % or more by weight colourant C.I. Solvent Red HPR content of 95 % or more by weight 351 Brightener with a colourant C.I. Fluorescent content of 90 C.I. known as 172 (also Solvent Yellow C.I colourant a with based thereon and preparations by % or more weight Solvent Yellow 135) content of 90 industry ( % of isopropoxytitanium triisostearate but than not more 2,5 (CAS of mica RN 12001-26-2), %) and 2 % (± — 72 dioxide (CAS RN of titanium 13463-67-7) %) 2 % (± — 28 Description Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a with thereon based a preparations with and thereon 116-75-6) based RN preparations (CAS and thereon 104 12226-78-7) based Blue with a based thereon Colourant C.I. Solvent Red 49:2 (CAS RN 1103-39-5) and preparations RN preparations Solvent (CAS and C.I. Colourant C.I. Solvent Brown 53 (CAS RN 64696-98-6) based thereon with a and preparations 67 Colourant 27344-41-8) Blue RN Solvent (CAS C.I. RN 27870-92-4 CAS RN 12671-74-8) and preparations 98 (CAS or Solvent Yellow Colourant C.I. 351 Colourant Brightener Fluorescent C.I. a with thereon based Solvent Red HPR (CAS RN 75198-96-8) preparations and Colourant C.I. Colourant Colourant C.I Solvent Yellow 172 known (also as C.I. Solvent Yellow 135) (CAS RN 68427-35-0) Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical weight: by Dye C.I. Carbon Black 7 Lake containing % or more containing by Titanium dioxide weight 1,5 coated with isopropoxytitanium triisostearate, Preparation 70 71 73 77 84 85 30 10 10 20 10 10 TARIC CN code ex 3204 19 00 ex 3204 19 00 ex 3204 19 00 ex 3204 20 00 ex 3204 90 00 ex 3205 00 ex 3205 00 ex 3206 11 00 ex 3206 19 00 ex 3204 19 00 *ex 3204 19 00 *ex 3204 19 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 73
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2017 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
1 0 % 0 m μ
m, and μ 0 % 0
0 % 0 0 % 0 m or more but not than 10 μ — 57 % or more but not more than 63 % of aluminium oxide (CAS RN 1344-28-1) but than 63 % or more not more — 57 dioxide % of titanium (CAS RN13463-67-7), and but than 42 % or more not more — 37 silane (CAS RN 2943-75-1) % of triethoxycaprylyl more but not than 2 % or more — 1 % by weight of silver, — not more than 85 palladium, of weight by % 2 than less — not titanate, — barium and — terpineol, cellulose, — ethyl ( capacitors ceramic multilayer of manufacture the in printing screen used for and % of silver % by weight or more, but than 50 not more — 30 % of palladium % by weight or more, but not than 17 more — 8 — of a thickness 0,3 — dioxide oxide (CAS RN 13463-67-7) iron (CAS RN 18282-10-5) titanium with or coated Description Non aqueous dispersion, containing by weight: 1345-05-7) by RN 14038-43-8) containing (CAS RN dispersion, Lithopone (CAS aqueous 27 Non Blue Pigment C.I. Colourant containing: Preparation containing paste Printing 65997-17-3): RN (CAS flakes of 40 10) (± of an average diameter coated with silver, Glass flakes Glass Inorganic products of a kind used as luminophores as used kind a 10 of 10 products 20 Inorganic 10 20 20 40 TARIC CN code 3206 50 00 3206 50 ex 3206 49 70 ex 3207 30 00 ex 3207 30 00 ex 3207 40 85 ex 3207 40 85 ex 3206 42 00 *ex 3206 49 70
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 74
review mandatory End date for End date
31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2017 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0 -vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in -vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, N
-vinylcaprolactam, N
50 %, in organic solvents Anti-reflection coating, consisting of an ester based polymer modified with a chromophore group, in or methyl- 2-methoxy-1-propanol, acetate 2-methoxy-1-methylethyl either solution of of a the form polymer of % 10 than more not by weight 2-hydroxyisobutyrate, containing % of but % or more not more than 40 the form of a solution in ethanol containing by weight 34 copolymer n-butanol solution of chains, in a side fluorinated copolymers with methacrylate-alkenesulphonate and/or diisoamylether and/or 4-methyl-2-pentanol isopropanol and butanol, isopropanol or ethanol in ethanol, solution a of form the butyl groups, in and butanol blend polypropylene copolymer or a of anhydride copolymer in an organic and propylene maleic solvent by %) 2 % (± solution copolymer with a content of solvent of in butylacetate 50 Tetrafluoroethylene weight term surgical implants % of polymer methylsil % or more but not more than 11 isopropanol, containing by weight 5 oxane a polycondensate Polymer consisting of of formaldehyde and modified naphthalenediol, chemically acetate ether methyl propylene glycol in dissolved halide, alkyne an with by reaction Description % or more but not more than with polyester copolymer a solid content of 30 resin Thermoplastic of Copolymer solution % of acrylate- % or more but not topcoat solution more than 15 Immersion containing by weight 0,5 a in with Copolymer acid and ethyl and/or isopropyl and/or methyl vinyl of maleic ether, monoesterified polyolefins, Chlorinated anhydride % by weight of propylene maleic than 20 but not more or more % 5 of Preparation of long manufacture kind the of xylene a used % by more for weight or containing 50 Silicones Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and 10 25 45 60 20 63 10 10 20 10 15 20 35 40 TARIC CN code ex 3208 10 90 ex 3208 90 19 ex 3208 90 19 ex 3707 90 ex 3208 20 10 ex 3208 20 10 ex 3208 90 19 ex 3208 90 19 ex 3208 90 91 ex 3208 90 19 ex 3208 90 19 ex 3824 90 92 *ex 3208 10 *ex 3208 90 19
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 75
review mandatory End date for End date
31.12.2018 31.12.2016 31.12.2017 31.12.2018 31.12.2019 Unit Supplementary - - - - -
duty 0 % 0 % 0 % 0 % Rate of autonomous
][1,4]ox
b ]chromen-13-ol f ]indeno[2,1- h -naphtho[2,1- ′ ]indeno[2,1- h -indole-2,3 H ]chromene-5-carboxylate, ]chromene-5-carboxylate, h
]chromene-5-carboxylate, ]chromene-5-carboxylate, h -benzo[ 0 % 0 H
-benzo[ H
-butyrolactone, γ
-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1 ′ -carboxylate, ′ ]chromen-13-ol, ]chromen-13-ol, more, azine]-9 f — (65 ± 10) % of — (30 ± 10) % of polyamide resin, — and naphthoquinonederivative, of 1,5) % ester (3,5 ± — acid arylsilicic of 0,5) % (1,5 ± — styrene — alkoxystyrene — alkylacrylates lactate ethyl dissolved in dyes: — methyl 8 Metallised film: — % or of aluminium (CAS RN 7429-90-5) more layers purity of 99,8 consisting of eight or of a — of not than 3,0, more density of each aluminium layer with an optical layer, resin a by separated layer aluminium each — with and PET, of film carrier a — on length in 000 metres — 50 up to of on rolls — methyl 6-(isobutyryloxy)-2,2-diphenyl-2 — methyl — 13-isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo[ 8-methyl-2,2-diphenyl-2 — ethoxycarbonylmethyl — 13-ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo[ Description Solution containing by weight: by containing Solution solution lactate ethyl Copolymer of hydroxystyrene with one of the following: or more in copolymer Acenaphthalene Solution polymers, based on containing modified natural two chemically or more of the following 10 30 25 50 60 75 10 TARIC
CN code ex 7607 20 90 ex 7616 99 90 ex 3208 90 19 ex 3208 90 19 ex 3208 90 99 ex 3208 90 19 *ex 3212 10 00 ______
M5 M4 ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 76
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2018 31.12.2020 31.12.2017 Unit Supplementary - l ------
duty 0 % 0 % 0 % 0 % Rate of autonomous ,
3 0 % 0 )
1
)
1 or more, but not more than 1,60 g/cm 0 % 0
0 % 0 3 0 % 0
)
1
) 1
chloride (CAS RN 7783-90-6) chloride in methyl propyl ketone (CAS RN 107-87-9), Printing ink, liquid, consisting of a dispersion copolymer of a vinyl and acrylate colour pigments in % of vinyl copolymer acrylate and colour isoparaffins, containing by weight not more than 13 pigments — consisting of a polyester polymer and (CAS a dispersion of silver RN 7440-22-4) and silver %, and % or more, but not than 57 more — solid content by weight of 55 with a total g/cm 1,40 of gravity specific a — with % of amorphous dioxide, silicon or more, but not more than 10 % or — 5 % or more of dye C.I. Solvent Black 7 in organic solvents — 3,8 ( for use in the marking circuits of integrated resin) mixed with: — wax, and polymer, vinyl-based — a agent colouring — a and photocopiers, multi fax machines, printers toner bottles for of for use in the manufacture ( function devices used to imprint electrodes ( electrodes imprint used to Description film Ink: plastic a on weight: fixed by ink containing sensitive ink, ( cartridges of ink-jet manufacture use in the for Ink formulation, Heat cartridge Disposable Dry ink powder with a base of hybrid resin and resin (made from polystyrene acrylic polyester isethionate methyl lauroyl Sodium 10 10 20 deterpenated not 10 20 orange, 30 of 40 oil Essential 10 TARIC CN code 3301 12 10 3301 12 ex 3215 11 00 ex 3215 19 00 ex 3215 90 00 ex 3215 90 00 ex 3215 90 00 ex 3215 19 00 *ex 3215 90 00 *ex 3402 11 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 77
review mandatory End date for End date
31.12.2018 31.12.2017 31.12.2018 31.12.2019 31.12.2018 31.12.2020 31.12.2020 31.12.2020 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2019 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0
(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised ether, (2-methylpropyl)-2-butyne-1,4-diyl bis
-(2-Hydroxyethyl)-derivative of hydrolysed maize starch (CAS RN 9005-27-0) with oxirane, methyl terminated tetramethyldec-5-yne-4,7-diol (CAS RN 577-11-7 and 9014-85-1) 9014-85-1) (EVA) ethylene and vinyl acetate mm, of a width put up of 45,7 but than 132 in rolls cm or more not more cm supplied on release a liner with an peel adhesion initial value of release not less than 15 N/25 mm (measured according to ASTM D3330) Description Vinyl copolymer surface active agent based on polypropylene glycol polypropylene on based agent active surface benzoate copolymer 1,4-dimethyl-1,4- sodium Vinyl chlorides containing and Surfactant methyltri-C8-C10-alkylammonium (INN) of sodium mixture docusate Polyoxyethylated-12-hydroxystearic acid (CAS RN 70142–34–6) polypeptides Surface-active of synthetic RN Mixture oxirane of (CAS 2-ethylhexyloxymethyl solution 2,4,7,9-tetramethyl-5-decyne-4,7-diol preparation, consisting of a mixture sodium docusate Surface-active and ethoxylated 2,4,7,9- containing aqueous ethoxylated preparation, an containing solvent of polysiloxane consisting of a mixture preparation, and poly(ethylene glycol) Surface-active Surface-active on preparation, a based Surface-active in preparation dispersed Cutting-fluid adhesive O epoxy microencapsulated component Adhesive based on an aqueous rosin dispersion of a and mixture of dimerised a copolymer of Two thickness of 0,0760,127 a more but not than adhesive with mm or sensitive pressure Acrylic 10 20 30 10 20 30 50 60 70 10 20 10 30 40 TARIC CN code ex 3402 13 00 ex 3402 13 00 ex 3402 90 10 ex 3402 90 10 ex 3402 90 10 ex 3403 99 00 ex 3505 10 50 ex 3506 91 00 ex 3506 91 00 ex 3506 91 00 ex 3402 13 00 *ex 3402 90 10 *ex 3402 90 10 *ex 3402 90 10
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 78
review mandatory End date for End date
31.12.2020 31.12.2019 31.12.2020 31.12.2016 31.12.2019 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
)
1 protease (CAS RN 123175-82-6) for use in the manufacture Achromobacter lyticus
)
1 — 34,5 % or more but not more than 60 % of styrene butadiene styrene copolymers, % of styrene and more but not than 60 % or more — 34,5 esters. — rosin Dissolved in: 78-93-3), RN (CAS ketone ethyl — Methyl and 142-82-5), RN (CAS — Heptane — solvent naphtha (CAS RN 64742-89-8) aliphatic light Toluene (CAS RN 108-88-3) or ( of human and analogue insulin products component airbag a of used as and additives, nitroguanidine, binder solution of the in copper nitrate inflators ( more than 0,43 than 3,18 mm but not more mm with a photopolymer layer of a thickness of 0,15 mm or more but not more than 0,8 mm, not thickness of not more than 1 mm of a total film, covered with a release resin, of a kind used for goods electron-sensitive of heading 8541 or 8542 Description Preparation containing by weight: by containing Preparation 37340-58-2) of RN Preparation (CAS amidinohydrolase Creatine or nitrate shape, composed strontium of of cylindrical of granulate form powder in the Pyrotechnical Photosensitive plate consisting of a photopolymer thickness of on of a total layer a polyester foil coated of a kind substrate printing plate, printing on used for newsprint, consisting of a metal Relief of chromium and or of glass, covered with a film of quartz coated with a photosensitive Plate or 50 10 20 10 20 30 10 TARIC
CN code ex 3507 90 ex 3601 00 ex 3701 30 00 ex 3701 99 00 ex 3507 90 *ex 3701 30 00 *ex 3506 91 00 ______
M5 M4 M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 79
review mandatory End date for End date
31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2016 31.12.2016 31.12.2019 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
0 % 0
) 1
— by weight not more than 12 % of diazooxonaphthtalenesulphonic ester — acid by weight not than 12 more resins — phenolic methyl 3- or lactate or ethyl acetate 2-methoxy-1-methylethyl in a solution containing at least 2-heptanone methoxypropionate or resins acrylic or — phenolic precursor, % by sensitive acid weight of light — a maximum 2 or ethyl lactate in a solution containing 2-methoxy-1-methylethyl acetate and cyclohexanone and not containing ethyl-3-ethoxypro methoxy-1-methylethylacetate whether or pionate containing Sensitising emulsion or preparation one or more of: polymers, — acrylate polymers, — methacrylate polymers, styrene of — derivatives dissolved % of photosensitive in an organic acid precursors, containing by than weight not more 7 acetate 2-methoxy-1-methylethyl least solvent containing at % by weight of naphthoquinonediazide— esters, not more than 10 % by weight of copolymers hydroxystyrene more but not than 35 % or more — 2 derivatives epoxy-containing of weight by % 7 than more — not lactate ethyl and/or 1-ethoxy-2-propyl acetate dissolved in % by weight of xylene, and but than 75 % or more not more — 55 % by weight of ethylbenzene but than 18 % or more not more — 12 Description Photomasks for photographically transferring circuit diagram patterns onto semiconductor wafers semiconductor ( onto discs patterns silicon diagram of circuit sensitization transferring the photographically for for of: Photomasks emulsion consisting Photosensitive emulsion Sensitising containing: emulsion Sensitising containing colour pigments, 2- containing polymer, based on photosensitive acrylic Preparation containing: containing: polyisoprene emulsion, cyclized Sensitising of consisting emulsion Photosensitive 35 70 10 10 15 25 30 40 45 TARIC CN code ex 3707 10 00 ex 3707 10 00 ex 3707 10 00 ex 3707 10 00 ex 3707 10 00 ex 3707 90 ex 3707 10 00 ex 3707 10 00 ex 3705 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 80
review mandatory End date for End date
31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2017 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
-ethyl-2-pyrrolidone with a polymer content by content polymer a with -ethyl-2-pyrrolidone N
)
1 )
1 -methyl-2-pyrrolidone or
)
1 N hydroxystyrene derivatives, acetate, propylene glycolmethylether — 20 % or more but not more than 45 % of copolymers of acrylates and/or methacrylates and and/or methacrylates acrylates copolymers of % of than 45 but not more or more % — 20 — % of organic and/or solvent containing ethyl lactate at least % or more but not more than 50 25 % of acrylates, more but not than 30 % or more — 5 % of a photoinitiator — not more than 12 into a polyimide, which is convertible with unsaturated carbon in the side-chains in form precursor of a solution from % or more weight 10 facsimile for cartridges of manufacture or carbon black, for use as a developer in the magnetite ( or copiers machines, computer printers ( machines, cartridges for facsimile computer printers or copiers computer machines, facsimile for of cartridges manufacture the a developer in use as process, for ( printers or copiers copolymer acrylate/butadiene — styrene pigment organic an or black carbon — either — whether or not containing polyolefin or amorphous silica for use as a for facsimile developer in the bottles or cartridges manufacturing of ink/toner filled ( and copiers machines, computer printers Description Dielectric coating, buffering mechanical stress, consisting of a radically photopatternable polyamide- weight: photopatternable by radically containing a emulsion of Photosensitive consisting stress, mechanical buffering coating, Dielectric of: Dry ink powder or toner blend, consisting of a copolymer of styrene and and butyl either acrylate consisting blend, toner Dry ink powder blend, or toner based on a polyol of resin, for use as a developer in manufacture the or powder polymerisation by a manufactured resin, polyester on a blend, based toner or ink powder Dry ink Dry 50 55 10 20 40 50 TARIC CN code ex 3707 10 00 ex 3707 90 20 ex 3707 90 20 ex 3707 90 20 ex 3707 90 20 ex 3707 10 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 81
review mandatory End date for End date
31.12.2018 31.12.2019 31.12.2020 31.12.2019 31.12.2016 31.12.2020 31.12.2017 31.12.2018 31.12.2016 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 1,7% Rate of autonomous 0 % 0 0 % 0
)
1
more than 10 % of polymer, in a solution in two or three of the following % of polymer, in a solution substances: in two or three of more than 10 108-65-6) RN (CAS acetate — 2-methoxy-1-methylethyl 107-98-2) RN (CAS — 1-methoxypropan-2-ol 97-64-3) RN (CAS lactate — ethyl and acid, sulphonic alkyl halogen-free of % — 2 polymer fluorinated a of % — 5 phenolic hydroxy group modified with a chromophore group, of a solution in of an organic the form containing by acetate 2-methoxy-1-methylethyl 1-ethoxy-2-propanol or solvent containing either % of polymer weight not more than 10 — resin, of a photosensitive acrylic a dry layer and foil, protecting terephthalate) poly(ethylene a side one — on foil protecting polyethylene a side other the — on ( pharmaceutical and/or biochemical products resin, phenolic Rosin modified % by weight of rosin, but not than 75 % or more more — containing 60 25, than more not of value acid an — with of a kind printing used in offset Description Anti-reflection coating, consisting of a modified methacrylic polymer, containing by weight not than: weight more by not containing weight polymer, by methacrylic containing modified solution, a aqueous of an consisting of coating, form Anti-reflection the in coating, Anti-reflection a siloxane polymer or an organic having coating, consisting of either a Anti-reflection containing: Rolls, (CAS RN 90387-90-9 Expandable graphite and CAS RN 12777-87-6) carbon and Mixture of activated polyethylene, in form of powder of aid in the manufacture Soda diatomaceous acid washed, use earth, flux calcinated as a filter for 20 50 10 40 80 85 10 10 oil 11 Pine TARIC CN code 3805 90 10 3805 90 ex 3806 10 00 ex 3802 10 00 ex 3802 90 00 ex 3707 90 ex 3707 90 ex 3801 90 00 ex 3909 40 00 ex 3707 90 *ex 3707 90
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 82
review mandatory End date for End date
31.12.2018 31.12.2019 31.12.2018 31.12.2017 31.12.2020 31.12.2018 31.12.2018 31.12.2019 31.12.2017 31.12.2019 31.12.2016 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous -ethoxy-5,6- ′
0 % 0
0 % 0 0 % 0 , or
kurstaki and
, or aizawai , or subsp. aizawai tenebrionis israelensis ) isomer, fixed on a support of silicon dioxide -ethoxy- spinosyn L) ′ R subsp. subsp. subsp. or kurstaki, subsp.
)
2 Bacillus thuringiensis Bacillus thuringiensis Bacillus Bacillus thuringiensis Berliner thuringiensis Bacillus thuringiensis Bacillus thuringiensis Bacillus — — — — — more ( sale retail not put up for hymexazole (ISO), or % of pyrithione zinc (INN), but than 26 % or more not more — 24 % of pyrithione zinc (INN) but than 41 % or more not more — 39 Penoxsulam ingredient as an herbicidal aqueous the active suspension and of tepraloxydim (ISO), % or more — 30 hydrocarbons consisting of aromatic fraction % of a petroleum — not more than 70 dihydro spinosyn J) and (3 and dihydro spinosyn J) Description Preparation containing endospores or spores and protein crystals derived from either: from derived crystals protein ( and (3 its spores components and or spinosyn (ISO) endospores two Indoxacarb containing of Preparation preparation 935545-74-7), RN (CAS (ISO) (ISO) Spinosad Spinetoram 14915-37-8) RN Mancozeb (CAS RN 8018-01-7) (ISO) packings imported in immediate of a content of 500 kg or (CAS ingredient pyrithione active % of copper % or more but not than 75 Fungicide in the form of a powder, containing by weight 65 an on consisting of a Preparation suspension in containing of pyrithione water, zinc (INN) by weight: as based (ISO) Preparations flazasulfuron containing of % than 55 more but not more or % by weight 45 containing concentrate based on a Preparation Herbicide consisting of a suspension Preparation, containing by of tepraloxydim (ISO), weight: 10 30 40 60 10 10 30 50 10 10 40 TARIC CN code ex 3808 92 30 ex 3808 92 90 ex 3808 91 90 ex 3808 91 90 ex 3808 91 90 ex 3808 92 90 ex 3808 92 90 ex 3808 93 15 ex 3808 93 23 ex 3808 93 27 ex 3808 91 90
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 83
review mandatory End date for End date
31.12.2019 31.12.2020 31.12.2020 31.12.2020 31.12.2020 Unit Supplementary - - - - -
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
) 1 and methylpropene — 38,8 % or more but not more than 41,2 % of Gibberellin A3, % of Gibberellin or more but not than 41,2 % or more — 38,8 A4 and % of Gibberellin A7 % or more but not than 10,5 — 9,5 % of benzyl(purin-6-yl)amine more but not than 2,00 % or more — 1,88 of a kind used in plant growth regulators % of sodium para-nitrophenolate, — 1,8 % of sodium ortho-nitrophenolate, — 1,2 % of sodium 5-nitroguaiacolate — 0,6 ( of a plant growth regulator for use in the manufacture %, than 96 purity more 1-methylcyclopropene with a % of more but not than 3,6 — % or 3 and of 1-chloro-2-methylpropene 3-chloro-2- % of each impurity containing less than 0,05 — vegetables and ornamentals of post-harvest fruits, of a growth regulator for use in the manufacture ( generator with a specific A4, of Gibberellin % or more — 55 A7, % of Gibberellin more but not than 35 % or more — 1 A4 and of Gibberellin A7 % or more combined Gibberellin — 90 occurring Gibberellins and naturally % of a combination other of water — not more than 10 of a kind used in plant growth regulators Description Preparation, in the form of granules, containing by weight: by weight: containing by granules, containing of solution, form glycol the a in in Preparation, benzyl(purin-6-yl)amine of consisting weight: Preparation by containing solution weight: Aqueous by containing weight: powder by white containing Mixed powder, of form the in Preparation 10 20 30 40 50 TARIC CN code ex 3808 93 90 *ex 3808 93 90 *ex 3808 93 90 *ex 3808 93 90 *ex 3808 93 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 84
review mandatory End date for End date
31.12.2019 31.12.2020 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2019 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
0 % 0 0 % 0
)
1 5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate5-dioxaphosphoran-5-ylmethyl methyl 0 % 0 λ 5-dioxaphosphoran-5-ylmethyl) methylphosphonate λ
— 1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5), RN (CAS — 1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione 77-48-5), RN (CAS — 1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione and 16079-88-2), RN (CAS — 1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione 126-06-7) RN (CAS — 1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione and bis(5-ethyl-2-methyl-2-oxo-1,3,2 % of tin % or more, but not more than 90 — 70 copper, silver, bismuth, metals of % of one zinc, or indium or more — not more than 10 ( industry technical for use in the electro hydrocarbon than: solvent, containing by weight not more an aromatic in manganese tricarbonyl % of 1,2,4-trimethyl-benzene, — 4,9 % of naphthalene, and — 4,9 % of 1,3,5-trimethyl-benzene — 0,5 Description Oxamyl (ISO) (CAS RN 23135-22-0) in a solution of cyclohexanone and water and cyclohexanone containing: of 32718-18-6) solution RN a (CAS in Bromochloro-5,5-dimethylimidazolidine-2,4-dione 23135-22-0) RN 71751-41-2) (CAS RN (ISO) (CAS Oxamyl (ISO) 5-ethyl-2-methyl-2-oxo-1,3,2 Abamectin of Mixture Defoamer, consisting of oxydipropanol of a mixture and 2,5,8,11-tetramethyldodec-6-yn-5,8-diol and Soldering or welding resin containing of metals paste, consisting by a mixture of weight: % by weight of methylcyclopentadienyl than 63 but not more % than 61 Solution of more Salts of dinonylnaphthalenesulphonicoils of a solution in mineral acid, in the form 30 10 20 10 20 10 10 10 TARIC CN code ex 3808 99 90 ex 3809 91 00 ex 3809 92 00 ex 3810 10 00 ex 3811 19 00 ex 3811 21 00 ex 3808 94 20 *ex 3808 99 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 85
review mandatory End date for End date
31.12.2020 31.12.2018 31.12.2020 31.12.2018 Unit Supplementary - - - -
duty 0 % 0 % 0 % 0 % Rate of autonomous
) )
1 1
)
1
) 1 with polyisobutenyl anhydride (CAS RN succinic 147880-09-9), — esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9), RN (CAS pentaerythritol and acid succinic polyisobutenyl of — esters and oils % by weight of mineral but than 55 % or more not more — 35 % by weight, — content of not more than 0,05 with a chlorine ( oils lubricating of blends used of additives for in the manufacture and sulphonates, alkylbenzene (C16-C24) magnesium — borated oils, — mineral more than 250, of base number (TBN) having but not more than 350, use in the total a for ( manufacture of lubricating oils polyethylenepolyamines of products reaction from derived succinimide polyisobutene — containing oils, % by weight of mineral but not than 55 % or more more — containing 35 %, 0,05 than more not of weight by content chlorine a — with — having a total base number of less than 15, ( oils lubricating of blends used of additives for in the manufacture 11059-65-7), RN (CAS dithiophosphate) bis(hydrogen bis[bis(tetrapropylenephenyl)] — zinc 597-82-0), RN (CAS thiophosphate — triphenyl and 101-02-0), RN (CAS phosphite — triphenyl oils, — mineral ( of lubricating oils for use in the manufacture Description Dispersing agent containing: agent Dispersing containing: Additives agent: Dispersing of: consisting Additives, 12 13 14 15 TARIC CN code ex 3811 21 00 ex 3811 21 00 ex 3811 21 00 ex 3811 21 00
M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 86
review mandatory End date for End date
31.12.2020 31.12.2018 31.12.2020 31.12.2018 31.12.2018 Unit Supplementary - - - - -
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
) )
1 1 -[3-(dimethylamino)propyl]methacrylamide, -[3-(dimethylamino)propyl]methacrylamide,
N
) )
1 1
of an average molecular weight (Mw) of more than 10 000 but not more than 20 000, and 000 but not more than 20 of weight more than 10 (Mw) of an molecular average — more than 15 %, but not more than 30 % by weight oils, of mineral %, — but not more than 30 more than 15 ( of lubricating oils for use in the manufacture — Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol) of base Mannich product (reaction alkylphenol beta-aminocarbonyl of salt — Calcium and oils % by weight of mineral but than 60 % or more not more — 40 — having a total base number more than 120 ( oils lubricating of blends used of additives for in the manufacture diisobutylene, sulphurized — mainly sulphonate, — calcium and succinate, polyisobutylene — dialkylaminoalkyl oils, — mineral ( of lubricating oils for use in the manufacture sulphonates, calcium alkyltoluene chain — long oils, and % by weight of mineral % but not more than 50 — than more 30 — having a total base number of more than 310 but not more than 340, ( oils lubricating of blends used of additives for in the manufacture oil mineral solution in with copolymer polymethacrylate alkyl (C8-18) — a Description Detergent containing: Detergent a of form containing: the Additives in compounds, molybdenum organic complex containing: on Detergent based oils, lubricating for Additives containing: Additives 16 17 18 20 25 TARIC CN code ex 3811 21 00 ex 3811 21 00 ex 3811 21 00 ex 3811 21 00 ex 3811 21 00
M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 87
review mandatory End date for End date
31.12.2018 31.12.2017 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary - - - - -
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
) 1
) ) )
1 1 1 anhydride groups reacted with 4-(4-nitrophenylazo)aniline and 3-nitroaniline, and and 3-nitroaniline, 4-(4-nitrophenylazo)aniline with anhydride groups reacted pylmorpholine, and — 20 % or — more by weight of an ethylene-propylene copolymer modified by chemically succinic 20 oils, — mineral ( of lubricating oils for use in the manufacture a used as and formaldehyde, acid salicylic phenol with polyisobutylene substituted products of concentrated additive the for manufacture of engine oils through a blending process and 84605-23-2), RN (CAS formaldehyde with products reaction heptylphenol of salts — calcium oils, — mineral the manu 100, use in than 40 but not more for of more base number (TBN) having total a ( oils or overbased for use in lubricating oils detergents of lubricating facture 78330-13-9), RN (CAS polyisobutylenephenol — o-amino 84605-20-9), RN (CAS succinimide — polyisobutylene 68784-17-8), RN (CAS — alkenylimidazoline (CAS RN 36878-20-3 and CAS RN 27177-41-9), derivatives nonylated diphenylamine and — % by weight oils, of mineral %, — but not more than 45 more than 30 ( of lubricating oils for use in the manufacture aminopro by modified alcohols, C4-C20 with esterified copolymer anhydride styrene-maleic — a oils, % by weight of mineral % but not more than 75 — than more 50 ( of lubricating oils for use in the manufacture Description Additives containing: Additives Additives oils, containing oils, consisting salts of reaction for lubricating of calcium mineral containing: Additives containing: Additives containing: Additives 27 30 33 35 37 TARIC CN code ex 3811 21 00 ex 3811 21 00 ex 3811 21 00 ex 3811 21 00 ex 3811 21 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 88
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2017 31.12.2019 Unit Supplementary - - - -
duty 0 % 0 % 0 % 0 % Rate of autonomous
-[3-(dimethylamino)propyl]methacrylamide copolymer, -[3-(dimethylamino)propyl]methacrylamide N
)
1
) )
1 1 phenyl) aniline and 3-nitroaniline, and and 3-nitroaniline, phenyl) aniline %, and more, but not more than 30 % or weight of 15 — an (C8-18) alkyl methacrylate and methacrylate alkyl (C8-18) — an copolymer, ethylene-propylene — an — an ethylene-propylene copolymer chemically modified with succinic anhydride, 4-(4-nitro oils, % by weight of mineral % but not more than 30 — than more 15 pour whether or not containing point a methacrylic depressant polymer, for use in the manufacture ( oils of lubricating and 231297-75-9), RN (CAS alkylbenzenesulphonates (C20-C24) magnesium — overbased oils, % of mineral % but not more than 50 — by weight more than 25 of manufacture the in use 450, for than not more 350, but than more number of base total having a ( lubricating oils 70024-69-0), RN (CAS alkylbenzenesulphonates C16-24 calcium on — based oils, mineral — containing of engine oils through manufacture used additive for the a blending as a concentrated process by sulphonate content a sulphonates (CAS 68783-96-0)with petroleum overbased calcium — oil, % of mineral % but not more than 60 — by weight more than 40 having base number of 280 a total or more but not more than 420, of for use in the manufacture ( lubricating oils Description Additives containing: Additives containing Additives oils, lubricating for Additives containing: Additives 45 48 50 53 TARIC CN code ex 3811 21 00 ex 3811 21 00 ex 3811 21 00 ex 3811 21 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 89
review mandatory End date for End date
31.12.2019 31.12.2019 31.12.2017 31.12.2019 31.12.2019 Unit Supplementary - - - - -
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
) 1
) )
1 1 content by weight of 25 % or more but not more than 35 %, but % or more not more than 35 content by weight of 25 calcium alkylbenzenesulphonates (CAS RN 68584-23-6 and CAS RN 70024-69-0) with a total %, and % or more, but not than 25 more sulphonate content by weight of 15 — low base number calcium polypropylbenzenesulphonate (CAS RN 75975-85-8), and 75975-85-8), RN (CAS polypropylbenzenesulphonate calcium number base — low oils, % mineral % but not more than 60 — by weight more than 40 of manufacture the in use for 25, than more not but 10 than more of number base total having a ( lubricating oils and mixture, based succinimide polyisobutylene — a oils, % by weight of mineral % but not more than 50 — than more 40 ( oils lubricating of manufacture the in use for 40, than more number of base total having a a with 75975-85-8) RN (CAS benzenesulphonate substituted polypropylenyl calcium on — based — of 280 base number (TBN) or more but not than 320, with a total of engine oils through manufacture used additive for the a blending as a concentrated process synthetic and 61789-86-4) RN (CAS sulphonates petroleum calcium of mixture overbased — an oils, % of mineral % but not more than 60 — by weight more than 40 having base number of 280 a total or more but not more than 320, of for use in the manufacture ( lubricating oils and 160610-76-4), RN (CAS mixture based succinimide polyisobutylene — a oils, % by weight of mineral % but not more than 50 — than more 35 base total by weight, having a % 1,3 than but not more % 0,7 than of more having sulphur content a ( oils of lubricating number use in the manufacture of more than 8, for Description Additives containing: Additives oils, mineral containing: containing Additives oils, lubricating for Additives containing: Additives containing: Additives 55 57 60 63 65 TARIC CN code ex 3811 21 00 ex 3811 21 00 ex 3811 21 00 ex 3811 21 00 ex 3811 21 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 90
review mandatory End date for End date
31.12.2017 31.12.2018 31.12.2020 31.12.2020 31.12.2020 Unit Supplementary - - - - -
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
)
1
) 1
)
1 amines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9), — containing polyisobutylene succinimide derived from reaction products of polyethylenepoly oils, mineral — containing %, but than % or more not more 0,25 — content by weight of 0,05 with a chlorine 20, than more of (TBN) number base total a — with of engine oils through manufacture used additive for the a blending as a concentrated process 134758-95-5), RN (CAS compounds succinimide — borated and oils, — mineral — than having a total base number (TBN) greater 40, ( oils of additive mixtures for lubricating for use in the manufacture dialkylbenzenesulfonates, (C10-C14) — Calcium % by weight oils, of mineral %, — but not more than 60 more than 40 of blends additives for of base number than 10, for use in the manufacture of not more with a total ( lubricating oils and acrylate, ethyl and acrylate 2-ethylhexyl of copolymer — a oils % by weight of mineral % but not more than 80 — than more 50 ( oils of additive blends for use in for lubricating the manufacture succinimide, polyamine aromatic — polyisobutylene oils, % by weight of mineral % but not more than 60 — than more 40 % by weight, for use in the % but not more than 0,9 with a nitrogen content of more than 0,6 ( manufacture of additive blends for lubricating oils Description Additives for lubricating oils, lubricating for Additives containing: Additives containing: Additives of: consisting additives Antifoam containing: Additives 70 73 75 77 80 TARIC CN code ex 3811 21 00 ex 3811 21 00 *ex 3811 21 00 *ex 3811 21 00 *ex 3811 21 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 91
review mandatory End date for End date
31.12.2019 31.12.2017 31.12.2019 31.12.2017 31.12.2019 31.12.2017 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
)
1
) 1 succinic anhydride (CAS RN 84605-20-9), hydrazine (CAS RN 93925-00-9), and — polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl with polyethylenepolyamines of reaction from derived succinimide — polyisobutene oils, % by weight of mineral % but not than 43,3 more — than 31,9 containing more and chlorine, weight by % 0,05 than more — not — than having a total base number (TBN) greater 20, ( of additives blends for use lubricating oils in for the manufacture oils, % by weight of mineral % but than 45 not more — than 20 containing more — based of branched on whether or not carbonated, a mixture dodecylphenolsalts, calcium sulfide of a kind oils of blends lubricating used of additives for in the manufacture and disulphide carbon formaldehyde, with phenol heptyl branched of reaction the from — products naphtha solvent, petroleum — aromatic % of light but not more than 28 % than 15 by weight more ( of lubricating oils for use in the manufacture propylene oxide, phosphorus C12-14 chains, used as with with alkyl amines acid oxide, and phoric oils lubricating of the manufacture additive for a concentrated ( oils of lubricating use in the manufacture the for additive concentrated a RN 93925-37-2), phosphite (CAS used as sulphur and triphenyl manufacture of engine oils through a blending process Description Additives containing: Additives for acids, di-alkylphosphoric Additives, and mono- containing: and Additives amines primary of salts least at Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophos containing Additives Additives for lubricating oils, consisting products of reaction of butyl-cyclohex-3-enecarboxylate, 83 85 15 20 25 30 TARIC CN code ex 3811 29 00 ex 3811 29 00 ex 3811 29 00 ex 3811 29 00 *ex 3811 21 00 *ex 3811 21 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 92
review mandatory End date for End date
31.12.2019 31.12.2017 31.12.2019 31.12.2017 31.12.2019 31.12.2018 31.12.2020 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
-olefins and tall oil fatty α -dinonyldiphenylamine of
′ -dialkyl -2-hydroxyacetamides with N , -dinonyldiphenylamine, ′ N
) 1
)
1
)
1
)
1
)
1 not more than 5 %, not more than 5 facture of lubricating oils ( facture of lubricating oils of by weight content chlorine RN 68511-50-2), monochloride and sodium sulphide (CAS a with of the manufacture %, additive for used as a concentrated % or more but not than 0,5 more 0,01 lubricating oils % by weight of of lubricating the mixture, for use in the manufacture 1330-86-5) is more than 85 oils ( alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), concen used a as trated additive for the manufacture of engine oils through a blending process % 4-monononyldiphenylamine, and % but not more than 35 — by weight more than 28 % 4,4 % but not more than 65 — by weight more than 50 diisobutylene, sulphurized — mainly and sulphonate, — calcium succinate polyisobutylene — dialkylaminoalkyl ( of lubricating oils for use in the manufacture % by use in the weight, for but than 12 % or more not more 8 acids, with a sulphur content of ( of blends oils manufacture of additives for lubricating — by weight a total percentage of 2, 4-dinonyldiphenylamine and 2, 4 2, and 4-dinonyldiphenylamine 2, of percentage total a weight — by ( oils lubricating of manufacture the used for Description Additives consisting of an imidazoline based mixture (CAS RN 68784-17-8), for use in the manu the in use for 68784-17-8), RN (CAS mixture based imidazoline an of consisting of Additives with: mixture nonenes a branched of with sulphur products of 2-methyl-prop-1-ene oils, consisting of reaction lubricating Additives for and consisting diphenylamine oils, of lubricating (CAS RN which adipate of (C7-C9) dialkyl adipates, in diisooctyl mixture Additives consisting of a products for reaction Additives of consisting Additives containing: Additives Additives consisting of a of vegetable oil, long sulphurised chain mixture 35 40 45 50 55 60 65 TARIC CN code ex 3811 29 00 ex 3811 29 00 ex 3811 29 00 ex 3811 29 00 ex 3811 29 00 ex 3811 29 00 *ex 3811 29 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 93
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2017 31.12.2016 31.12.2018 31.12.2019 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1 0 % 0 0 % 0
)
1 0 % 0
)
1 nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09- nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione (CAS RN nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione tert- tert- 1), and 97503-12-3), -Isopropylidenediphenol C12-15 alcohol phosphite containing by weight 1 % or more but not but more or % 1 phosphite containing by weight -Isopropylidenediphenol C12-15 alcohol ′ weight of oleyl, palmityl and stearyl groups), for use in the manufacture of lubricating oils ( oils of lubricating manufacture use in the groups), for and stearyl oleyl, palmityl weight of 2,5-bis( of weight by % 70 than — more ( rich (CAS RN 398141-87-2), for use of lubricating oils in the manufacture % 2-ethylhexanol % or more but not than 29,9 20 6422-86-2) RN (CAS dicarboxylate — bis(2-ethylhexyl)-1,4-benzene — (CAS RN % by 1962-75-0) weight of dibutylterephthalate % but not more than 60 than 10 more % of bisphenol A (CAS RN 96152-48-6) more than 3 — more than 15 % by weight of 5-( than 15 more — ( of lubricating oils for use in the manufacture Description Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight by containing by % groups than 80 which the alkyl Additives consisting dialkylphosphitescontain more of (in containing: succinimide, Additives solution polyisobutenyl oil on 102-06-7) mineral based RN a salt (CAS in ammonium granules salt, quaternary Additives consisting of a mixture of 3-((C9-11)-isoalkyloxy)tetrahydrothiophene 1,1-dioxide, C10- guanidine acid a diphenyl Dinonylnaphthylsulphonic of on Solution based accelerator Rubber containing: Plasticiser, sebacate bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) 4,4 predominantly containing Mixture 70 80 85 10 40 10 10 10 20 TARIC CN code ex 3811 29 00 ex 3811 29 00 ex 3811 90 00 ex 3811 90 00 ex 3812 10 00 ex 3812 20 90 ex 3812 30 29 ex 3812 30 80 ex 3811 29 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 94
review mandatory End date for End date
31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2016 Unit Supplementary - - - - -
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous - -[3-[3- ω ω
-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- with polymer -bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, ′ N , N -bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4- polymer with 2,4- dichloro-6-(4- -bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, ′ N , -[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]- -[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]- α hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2) α (oxy-1,2- (2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly ethanediyl) (CAS RN 104810-47-1) (CAS RN 86403-32-9) natetradecanoate, and methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS dichloro-6-(4-morpholinyl)-1,3,5-triazine RN 193098-40-7), or morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7)
N — — — of 300 weight (Mw) polyethylene (CAS glycol of a weight average molecular RN 25322-68-3) and 41556-26-7), RN (CAS (1,2,2,6,6-pentamethyl-4-piperidyl)sebacate — bis 82919-37-7) RN (CAS sebacate piperidyl — methyl-1,2,2,6,6-pentamethyl-4- % of 2-(2-methoxyethoxy)ethanol and not more than 70 perchlorate esters C15-18 of tetramethylpiperidinyl mixture a % of than 50 but not more or more % — 25 % of other organic compounds — not more than 20 9003-07-0) RN (CAS polypropylene of carrier a — on — 80 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stan — 20 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4- and 2725-22-6), RN (CAS — 2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol — either — Description UV photo stabiliser containing: stabiliser photo UV weight: by % of sodium % or more but not more than 40 Compound containing by weight stabilisers 15 containing Mixture of: Mixture containing: UV-stabilizer, 25 30 35 40 55 TARIC CN code ex 3812 30 80 ex 3812 30 80 ex 3812 30 80 ex 3812 30 80 ex 3812 30 80
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 95
review mandatory End date for End date
31.12.2016 31.12.2016 31.12.2016 31.12.2017 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer ′ N ,
N
57583-35-4), (CAS RN dithia-4-stannatetradecanoate 57583-34-3), and zenepropanoic acid (CAS RN 127519-17-9), and with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7), with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine and methylethyl)-4-hydroxy-benzenepropanoic acid (CAS RN 127519-17-9) RN (CAS methylethyl)-4-hydroxy-benzenepropanoic acid — 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN — 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5- 7659-86-1) RN (CAS mercaptoacetate — 2-ethylhexyl 3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4-hydroxyben of esters alkyl linear and — branched 108-65-6) RN (CAS acetate — 1-methoxy-2-propyl — a hindered amine: % of 1-methoxypropan-2-ol, but than 71 % or more not more — 69 % of 2-methoxy-1-methylethyl acetate but than 31 % or more not more — 29 ethyl ether but not more or % on an aluminium oxide support and containing by weight 8 silver consisting of % of silver more than 40 — either an o-hydroxyphenyl triazine UV light absorber, or absorber, light UV triazine o-hydroxyphenyl an — either compound phenolic modified chemically — a Description Light stabiliser, consisting of branched and linear alkyl esters of 3-(2H-Benzotriazolyl)-5-(1,1-di- 3-(2H-Benzotriazolyl)-5-(1,1-di- of esters alkyl linear and branched of containing: consisting material stabiliser, Light plastic for Stabiliser containing: stabiliser Light of: nonafluorobutyl consisting and/or UV-stabilizer, ether weight: methyl by nonafluorobutyl containing of Mixture isomers containing mixtures Azeotrope 3 but of mm or more not more than 10 Catalyst, in the form of granules or rings a diameter mm, 60 65 70 80 20 40 10 TARIC CN code ex 3812 30 80 ex 3812 30 80 ex 3812 30 80 ex 3814 00 90 ex 3814 00 90 ex 3815 12 00 ex 3812 30 80
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 96
review mandatory End date for End date
31.12.2016 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1 0 % 0
) 1 /g or more (as determined (as more /g or
3
) 1
)
1
dioxide and/or aluminium oxide, dioxide and/or aluminium chromium, fixed on a silicon dioxide support with a pore volume of 2 cm of molybdenum, % than 40 but not more or more % dioxide, containing by weight 20 silicon ( acrylonitrile of manufacture the use in for evaluated together, bismuth and iron spheres, solid of form the — in — of 4 but not than 12 mm or more more mm, and of a diameter — consisting of a mixture of molybdenum oxide and oxides, other metal supported on silicon ( acid of acrylic for use in the manufacture consisting of oxides of a metal mixture containing predominantly oxides of molybdenum, nickel, ( aldehyde cobalt and acrylic iron, on of a support manufacture of aluminium oxide, use in the for ( facture of polypropylene of silicon dioxide of silicon dioxide silicon dioxide, in form of a suspension oil the in mineral a support of silicon dioxide, form of powder in the by the nitrogen absorption method) absorption nitrogen by the Description Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manu the compounds organometallic of or dichromium trioxide chromium trioxide, consisting of Catalysts in use Catalyst, in the form of a for powder, consisting oxides of a mixture of metal fixed on a support of dichloride, Catalyst, magnesium on supported tetrachloride titanium of 4,2 of spheres a diameter mm or more but Catalyst in the form not more than 9 mm, containing Catalyst Catalyst consisting of phosphoric bonded chemically acid to a support of silicon dioxide compounds Catalyst consisting of organo-metallic of aluminium and fixed on zirconium, a support compounds Catalyst consisting of organo-metallic of aluminium and chromium, fixed on a support compounds Catalyst consisting of organo-metallic of magnesium and titanium, fixed on a support of Catalyst consisting compounds of organo-metallic of aluminium, magnesium and titanium, fixed on 10 15 20 25 30 65 70 75 80 85 TARIC CN code ex 3815 19 90 ex 3815 19 90 ex 3815 19 90 ex 3815 19 90 ex 3815 19 90 ex 3815 19 90 ex 3815 19 90 ex 3815 19 90 ex 3815 19 90 *ex 3815 19 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 97
review mandatory End date for End date
31.12.2018 31.12.2016 31.12.2017 31.12.2017 31.12.2018 31.12.2020 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)-, di[chloride(1-)], ′
O 0 % 0 )
1 k O, k -(ethanoato- μ
-oxo- μ
0 % 0
) 1 )ethane-di-
7 N k ,
4 N k ,
1 N k
)
1 -1,4,7-triazonine-1-yl- H used to accelerate chemical oxidation or bleaching (CAS RN 1217890-37-3) RN (CAS bleaching oxidation or chemical accelerate used to facture of polyolefins ( facture of polyolefins ( batteries) aid (hearing batteries cell button zinc air for rolls, Cathode, in 1 containing by weight: % of titanium, and but than 30 % or more not more — 20 % of chlorine but than 72 % or more not more — 55 and chloride, titanium(III) and chloride magnesium of complexes — tetrahydrofuran dioxide — silicon by %) weight of magnesium, and 0,6 % (± — containing 6,6 by %) weight of titanium 0,2 % (± — containing 2,3 atoms 56 carbon 12 – containing chains, carbon matrix, dioxide silicon a in oxides metal other and oxide molybdenum — containing — 4 solids of a length but than of hollow of mm or more not more 12 cylindrical in the form mm ( acid of acrylic for use in the manufacture titanium % of than 30 but not more or more % 9 material, by weight, the hexane- or heptane-free in Description Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manu the in use for dichloride, magnesium on 1,2-bis(octahydro-4,7-dimethyl- supported (1+)], tetrachloride di[manganese titanium of containing urea ingredient Catalyst dimethylaminopropyl active on an hydro of: based with aliphatic oil Initiator catalyst with mineral Oxidation acids, in sulphonic suspension alkylnaphthalene a and aluminium chloride, trichloride of titanium mixture a consisting of in powder form, Catalyst, different of of consisting mixture Catalyst, a of consisting Catalyst, Catalyst: in the form of a suspension trichloride, Catalyst containing titanium in hexane or heptane containing 87 10 86 16 18 20 30 33 40 50 TARIC CN code ex 3815 19 90 ex 8506 90 00 ex 3815 90 ex 3815 90 ex 3815 90 ex 3815 90 ex 3815 90 ex 3815 19 90 *ex 3815 90 *ex 3815 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 98
review mandatory End date for End date
31.12.2019 31.12.2016 31.12.2020 31.12.2018 31.12.2017 31.12.2018 31.12.2018 31.12.2016 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
)
1
-(2-hydroxypropylammonium)diazabicyclo (2,2,2) octane-2-ethyl hexanoate, N
glycols ethane-1,2-diol dissolved in in isobutanol ethyl)trimethylammonium 2-ethylhexanoate ( hydrocarbons of olefins oligomerization or for the of alkylaromatic transalkylation % of disodium oxide oxides metal and less than 1 % of rare-earth or more but not more than 3 basis: oil- and hexane-free % of titanium, and more but not than 10 % or more — 4 % magnesium but than 20 % or more not more — 10 ( by hydration acrylonitrile production the of in the of acrylamide catalyst use as a for water, % of eicosylbenzene, but than 60 % or more not more — 35 % of docosylbenzene, but than 50 % or more not more — 25 % of tetracosylbenzene more but not than 25 % or more — 5 Description Catalyst, consisting of a mixture of (2-hydroxypropyl)trimethylammonium formate and dipropylene and formate (2-hydroxypropyl)trimethylammonium of mixture a of consisting Catalyst, containing Catalyst, in or Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution gel polyacrylamide % of (2-hydroxy-1-methyl % or more but not more than 79 Catalyst, containing by weight 69 a in hydrocarbons, for the alkylation of aromatic Catalyst based for the on (zeolite), aluminosilicate suspended enzymes, % containing by weight 2 (zeolite), of rodlets, consisting an aluminosilicate Catalyst, in the form containing weight: bacteria, by and magnesium chloride, containing by weight on an tetrachloride Catalyst, consisting of titanium J1 containing rhodocrous (C14-26) Rhodococcus alkylbenzenes of Mixture 70 71 80 81 85 86 88 89 10 TARIC CN code ex 3815 90 ex 3815 90 ex 3815 90 ex 3815 90 ex 3815 90 ex 3815 90 ex 3817 00 50 ex 3815 90 *ex 3815 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 99
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2016 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2020 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
0 % 0
0 % 0
) )
1 1
(CAS RN 658066-44-5), — 88 % or more but not more than 98 % of hexadecylnaphthalene but than 98 % or more not more — 88 % of dihexadecylnaphthalene more but not than 12 % or more — 2 carbon atoms % or more for acid content 80 whether or not hydrogenated, fatty with free acid distillate, Palm fatty of: use in the manufacture 3823, heading of acids fatty monocarboxylic — industrial 3823, heading of acid — stearic 2915, heading of acid — stearic or 2915, heading of acid — palmitic ( 2309 heading of preparations feed — animal of: use in the manufacture for from refining Palm acid oils 3823, heading of acids fatty monocarboxylic — industrial 3823, heading of acid — stearic 2915, heading of acid — stearic or 2915, heading of acid — palmitic ( 2309 heading of preparations feed — animal % of sodium evaluated as sodium oxide, in form of rodlets the more than 11 — % of 2-(3-chloro-5-(trifluoromethyl)pyridin-2-yl)ethanamine but than 42 % or more not more 38 % of sulphuric acid (CAS RN 7664-93-9) and but than 25 % or more not more — 21 % of methanol (CAS RN 67-56-1) more but not than 2,9 % or more — 1 Description Mixture of alkylnaphthalenes, containing by weight: by containing ester alkylnaphthalenes, phosphate of not on Mixture weight based by fluid containing hydraulic containing dodecyl benzenes benzenes mainly branched alkyl of Mixture resistant form, 12 varying to 56 from a chain-length chains, of Mixed alkylnaphthalenes, modified with aliphatic Fire sodium the in type) Y the of zeolite (artificial aluminosilicate weight Acid by containing solution Aqueous (CAS RN 70258-18-3) Toluene in 2-chloro-5-(chloromethyl)-pyridine Solution of 20 20 30 30 10 20 30 20 10 21 22 TARIC CN code ex 3823 19 30 ex 3823 19 90 ex 3824 90 92 ex 3817 00 80 ex 3817 00 80 ex 3819 00 ex 3823 19 30 ex 3823 19 90 ex 3824 90 15 ex 3824 90 92 ex 3817 00 80
M5 M4 ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 100
review mandatory End date for End date
31.12.2020 31.12.2019 31.12.2018 31.12.2018 31.12.2016 31.12.2016 31.12.2018 31.12.2016 31.12.2018 31.12.2020 31.12.2018 31.12.2020 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
-(4- 0 % 0
0 % 0 bis-O -glucitol D
-benzylidene- bis-O 0 % 0 0 % 0
-4-(2-cyano-2-butoxycarbonyl)vinyl-2-methoxy- -4-(2-cyano-2-butoxycarbonyl)vinyl-2-methoxy-
α
-butyrolactone and quaternary ammonium the salts, for γ
)
1 -(1-naphthylmethyl)furan-2-propionic acid (CAS RN 25379-26-4) -(1-naphthylmethyl)furan-2-propionic in α -glucitol and also containing carboxylic acid derivatives and an alkyl sulphate alkyl and an derivatives acid containing carboxylic and also -glucitol D -hydroxyhexa(oxyethylene), and
ω
phenyl- methylbenzylidene)- ( capacitors manufacture of electrolytic propan-2-ol % of divinylbenzene (CAS RN 1321-74-0) more but not than 85 of dinonylnaphthalenesulphonicconsisting preparations of salts Anti-corrosion acid, either: — on a support wax, of mineral whether or not modified chemically, or — of a solution in an organic solvent in the form % than 90 toluene % of % or more but not than 95 85 — — 5 % or more but not more than 15 % of polyoxyethylene (20) sorbitan monopalmitate more but not than 15 % or more — 5 Description Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and ethanol in or dissolved % 109037-78-7), 56 RN weight (CAS by titanium(IV) containing of ethylvinylbenzene-isomers, complexes and Butylphosphato divinylbenzene-isomers end-group of iodoethyl Mixture one oil having mineral tetrafluoroethylene, in of dissolved Oligomer phenate, phosphonate 1,3:2,4- % by weight of than 96,5 % but not more 92 than containing not less Preparations tetrahydrofuran Calcium in solution but not more more % or content by weight of 65 of 3-butylene-1,2-diol with a of acetates Mixture tetrahydro- a weight: of of by % by weight of 1,3:2,4- containing not less than 47 Preparations Preparation form containing the Preparation of in predominantly 7397-46-8) consisting RN Preparation (CAS Diethylmethoxyborane 33 40 23 32 34 35 36 37 39 42 44 45 46 TARIC CN code ex 3824 90 92 ex 3824 90 92 ex 3824 90 93 ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 *ex 3824 90 92 *ex 3824 90 92
M4 M5 ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 101
review mandatory End date for End date
31.12.2016 31.12.2017 31.12.2017 31.12.2017 31.12.2018 31.12.2018 31.12.2016 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
-carboxylate (CAS ′
-[9H]xanthene]-2 ′
) 1
) 1 -(diethylamino)-3-oxo-spiro-[isobenzofuran-1(3H),9 -dimethylformamide, -dimethylformamide, ′ N , -butyrolactone, -butyrolactone, γ N RN 154306-60-2) — trioctylphosphine oxide (CAS RN 78-50-2), RN (CAS oxide — trioctylphosphine 31160-66-4), RN (CAS oxide — dioctylhexylphosphine and 31160-64-2), RN (CAS oxide — octyldihexylphosphine 3084-48-8) RN (CAS oxide — trihexylphosphine and 50292-95-0), RN (CAS — 3,3-bis(2-methyl-1-octyl-1H-indol-3-yl)phthalide — ethyl-6 ( spectacle lenses of boric acid ester % of glycerol % or more but not than 50 and 40 crylate water, ammonia and acid dodecandioic glycol, diethylene — either — or — or oxide, silicon — or azelate, hydrogen ammonium — or oxide, silicon and azelate hydrogen ammonium — or oxide, silicon and water ammonia acid, dodecandioic — or ( capacitors of electrolytic for the manufacture than 5 monomer units (CAS RN 813452-37-8) chain length of less Description Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of manufacture the containing: in Preparation, use 169117-72-0) for RN absorber, (CAS UV of: ethoxylate a Mixture 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol containing on also based and: preparation, Preparation glycol carbonate-based ethylene Alkyl of predominantly % of 2-hydroxyethyl metha % or more but not more than 50 consisting Mixture containing by weight 40 Preparations polymer average an with bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] glycol) Poly(tetramethylene 47 48 49 50 51 53 54 TARIC CN code ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 *ex 3824 90 92
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 102
review mandatory End date for End date
31.12.2018 31.12.2019 31.12.2019 31.12.2018 31.12.2018 31.12.2020 31.12.2020 31.12.2016 31.12.2019 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
-dimethylformamide, containing by weight -dimethylformamide, N
, N -trifluorobiphenyl-2-amine ′ ,5 ′ ,4 ′
0 % 0
dimethyl)aminobenzoate with an average polymer chain length of less of length chain polymer an average with dimethyl)aminobenzoate p- alkylamines
tert- butanolate (CAS RN of a solution 865-47-4) in tetrahydrofuran in the form tert- -Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % of a solution in toluene containing in the form by weight 80 -Trifluorobiphenyl-2-amine, ′ ,5 4-(1,1-dimethylpropyl) phenol and copolymers alcohol (CAS of styrene-allyl RN 84605-27-6), and nyl)methylene]-nonitol ′ ,4 ′ — of phosphoric of phosphoric the reaction of esters acid obtained anhydride from a mixture with % by weight of isobutyl alcohol but than 35 % or more not more — 30 of less than 5 monomer units than 5 monomer units % of 2-hydroxybenzonitrile % or more but not than 55 45 % 37 at dichloromethane solution of % of 1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylphe % or more but not more than 98,9 89 — % of colourants % or more but not than 1 — 0,1 % of fluoropolymers more but not than 10 % or more — 1 or more but not more than 90 % of 3 or more but not than 90 Description Additives for paints and coatings, containing: length coatings, chain and polymer paints average for an Additives in with solution bis[(2-benzoyl-phenoxy)acetate] a glycol) of bis( Poly(tetramethylene form glycol) the Poly(ethylene in 2-Hydroxybenzonitrile, a in Potassium anhydride N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy 3 weight: by containing Preparation primary of Mixture 55 56 57 58 59 60 61 64 65 TARIC
CN code ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 *ex 3824 90 92 *ex 3824 90 92 ______
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 103
review mandatory End date for End date
31.12.2020 31.12.2020 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0 -hydroxy-3-phenoxy-benzeneace α
-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopro ω
37-9), 33-5) acid) tonitrile (CAS RN 61826-76-4), and -(2-Phenylethyl)-1,3-benzenedimethanamine derivatives (CAS RN 404362-22-7) derivatives -(2-Phenylethyl)-1,3-benzenedimethanamine -(2,4,6-Tribromophenyl)- — 20 % (± 1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190- RN (CAS Tribenzene ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) %) 1 (± % — 20 Dissolved in: 89-72-5) RN (CAS 2-sec-Butylphenol %) 5 (± % and 64742-94-5) — 10 RN (CAS aromatic heavy (petroleum), naphtha Solvent %) 7 %(± — 64 91-20-3) RN (CAS Naphthalene %) 1,0 (± % — 6 — % of Bisphenol-A bis(diphenyl % or phosphate) more but not (CAS RN more than 5945- 92 80 % oligomers of Bisphenol-A phenol phosphate, and more but not than 20 % or more — 7 101-02-0) RN (CAS phosphite triphenyl % 1 than more — not ({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine α pylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] 82-5) of: consisting ammonia and polymers of Aqueous solution % by weight of ammonia (CAS RN 1336-21-6), and % or more but not than 0,5 more — 0,1 — polymers of acrylic % by weight of polycarboxylate (linear % or more but not than 10 more 0,3 % by weight of (S)- % or more but not more than 90 74 — % by weight of toluene (CAS RN 108-88-3) but than 26 % or more not more — 10 Description Preparation containing by weight: by containing Preparation 93571- weight: RN by (CAS containing polysoyate) Preparation (sucrose sucrose with esters acid Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and fatty 20 % (± 10 %) of N 1- C16-18-Unsaturated and C6-24 containing: Preparation 75 87 68 69 70 72 73 74 76 TARIC CN code ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 ex 3906 90 *ex 3824 90 92 *ex 3824 90 92 *ex 3824 90 92
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 104
review mandatory End date for End date
31.12.2018 31.12.2017 31.12.2018 31.12.2019 31.12.2017 31.12.2018 31.12.2017 31.12.2020 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
0 % 0 )
1 0 % 0
ophosphate or 5 % or more but not more than 10 % of lithium perchlorate in of organic mixtures % of lithium perchlorate % or more but not more than 10 ophosphate or 5 solvents dissolved in diethylene glycol (CAS RN 111-46-6) dissolved in aluminium chelates, by ethyl acetoacetate %) weight of bis-alkoxylated 2 % (± — 50 solvent mineral) (white oil ink an — in with a boiling point of 160 °C or more but not than 180 °C glycol — dipropylene glycol — tripropylene or glycol, — tetrapropylene glycol — pentapropylene of or more % or not containing by synthetic rubber, whether weight 7 a (dicyclopentadiene), tricyclopentadiene, and: compound, aluminium-alkyl an — either — or an organic complex of tungsten — or an organic complex of molybdenum ( displays of manufacture use in the for mixture Liquid crystal Description Diethylene glycol propylene glycol triethanolamine titanate complexes (CAS RN 68784-48-5) RN (CAS complexes titanate triethanolamine glycol propylene % of lithiumfluor % or more but not than 20 toluene 10 containing by Preparation weight either glycol in of: Diethylene solution consisting 18162-48-6) Preparation RN (CAS dimethylsilane T-butylchloride consisting of two or more the following glycols: Preparation, % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene consisting Preparation by weight of 83 hydroxyethylated 2,4,7,9-Tetramethyldec-5-yne-4,7-diol, 86 57 78 80 81 82 83 84 88 TARIC CN code ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 ex 3824 90 92 ex 3824 90 93 ex 3824 90 92 *ex 3824 90 92 *ex 3824 90 92
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 105
review mandatory End date for End date
31.12.2019 31.12.2018 31.12.2018 31.12.2017 31.12.2019 31.12.2018 31.12.2019 31.12.2018 31.12.2019 31.12.2017 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
-
-oxybis(2-chloro ′
cresol (CAS RN 88-27-7) 0 % 0
-p- )
1
0 % 0 butyl-alpha-dimethylamino
-azodi(formamide) occurs at 135 occurs at °C -azodi(formamide) -tert- ′ cresol (CAS RN 88-27-7), of powder in the form -p-
toluene sulphinate) (CAS RN 24345-02-6) p- -azodi(formamide) (CAS RN 123-77-3), -azodi(formamide) ′
butyl-alpha-dimethyl amino dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea tert- of sterols, % or more — 75 % of stanols, — not more than 25 ( esters or stanol/sterol of stanols/sterols for use in the manufacture ethane) % of stanols and not more than 4 sterols (CAS RN 14643-87-9) of zinc diacrylate % or more — 85 % of 2,6-di — and not more than 5 or zirconium, Film containing oxides combined of titanium oxides or calcium with either of barium binding in an material acrylic Preparation containing: — C,C — magnesium oxide (CAS RN 1309-48-4), and 1309-48-4), RN (CAS oxide — magnesium bis( — zinc from C,C in which gas formation the Description Zinc dimethacrylate (CAS RN 13189-00-9), containing not more than 2,5 % by weight of 2,6-di of weight by % 2,5 than more not containing diphenyltoluene-2,4- 13189-00-9), bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, RN 1,1 of % or more level of chlorination 70 with a Paraffin (CAS and Mixture dimethacrylate sulfone Zinc bis(4-hydroxyphenyl) of end-groups consisting of powder, Mixture of phytosterols, not in the form containing by weight: tetrafluoroiodoethyl product, having reaction tetrafluoroethylene, Oligomeric of weight: Oligomer by containing mixture of % or more and balls, containing of flakes by phytosterols, in the form Mixture of weight 80 Powder 80 83 67 85 35 42 53 63 70 73 75 77 TARIC CN code ex 3824 90 93 ex 3824 90 93 ex 3824 90 93 ex 3824 90 93 ex 3824 90 93 ex 3824 90 93 ex 3824 90 93 ex 3824 90 93 ex 3824 90 93 ex 3824 90 96 ex 3824 90 96 ex 3824 90 93
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 106
review mandatory End date for End date
31.12.2018 31.12.2020 31.12.2017 31.12.2018 31.12.2019 31.12.2016 31.12.2016 31.12.2020 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0 0 % 0
) 1 Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges ( by weight: containing retardant Flame Non halogenated and 25038-54-4), RN (CAS 6 Polyamide %) 2 (± % — 50 7723-14-0) RN (CAS Phosphorus red %) 2 (± % — 50 containing by weight: % of sitosterols, % or more, but not more than 80 — 60 % of campesterols, — not more than 15 and stigmasterols, of % 5 than more — not % of betasitostanols — not more than 15 carbide (CAS %) of silicon RN 409-21-2) 0,5 % (± — 76 %) of aluminium oxide (CAS RN 1344-28-1), and % (± 0,05 — 4,6 oxide (CAS RN %) of yttrium 1314-36-9) % (± 0,05 — 2,4 and 57219-64-4), RN (CAS carbonate zirconium — basic 537-01-9) RN (CAS carbonate — cerium % of iron(III)oxide, but than 56 % or more not more — 52 oxide, and % of manganese(II) but than 42 % or more not more — 25 % of zinc oxide % or more but not than 22 — 3,5 Description Mixture of phytosterols derived from wood and wood oil), in based the oils (tall form of powder, grade) (refractory phosphate weight: bauxite alumina by Calcined silica containing Structured dispersion, Aqueous weight: by containing of: granulate, Mixture ferrite zinc Manganese 85 87 57 44 88 35 37 43 45 46 TARIC CN code ex 3824 90 93 ex 3824 90 96 ex 3824 90 96 ex 3824 90 96 ex 3824 90 96 ex 3824 90 96 ex 3824 90 96 *ex 3824 90 93 *ex 3824 90 93 *ex 3824 90 96
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 107
review mandatory End date for End date
31.12.2018 31.12.2020 31.12.2017 31.12.2018 31.12.2016 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
) 1
)
1 ), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide (CAS RN 68937-53-1) zirconium a with oxide stabilised calcium ),
2 content by weight of 92 % or more but not more than 97 % % or more but not than 97 content by weight of 92 — either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium, % or more of barium, neodymium % or magnesium and 15 — 5 either of niobium, % or more of lead and % or more 5 — or 30 in of the manufacture materials or for use as dielectric films for use of dielectric in the manufacture ( capacitors multilayer ceramic accumulators for electrodes produce positive kind used to a hydroxide, of and cobalt 1309-37-1) RN (CAS oxide) (Iron — ferrite 1344-43-0) RN (CAS oxide — manganese 1309-48-4) RN (CAS oxide — magnesium copolymer acrylate — styrene for cartridges or bottles filled ink/toner of powder, manufacturing in the the toner to be mixed with ( facsimile machines, computer printers and copiers — 52 % (± 10 %) of cuprous oxide (CAS RN 1317-39-1), — 38 % (± 10 %) of cupric oxide (CAS RN copper (CAS RN 7440-50-8) of metallic %) 1317-38-0), 5 % (± — and 10 — 3,4 mm, than more but not more or 1,6 mm either — but or 4mm or more not more than 6 mm Description Mixed metals oxides, in the form of powder, containing by weight: by containing powder, of form the in oxides, metals Mixed (ZrO oxide of: Zirconium consisting form, powder % by weight of zinc hydroxide but % or more not more than 18 in Nickel hydroxide, doped with 12 Carrier of weight by containing % or more of dichromium trioxide Fused magnesia containing by weight 15 Catalyst of: in the form of spheres a diameter Aluminium sodium silicate, 47 48 50 55 60 63 65 TARIC CN code ex 3824 90 96 ex 3824 90 96 ex 3824 90 96 ex 3824 90 96 ex 3824 90 96 ex 3824 90 96 *ex 3824 90 96
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 108
review mandatory 31.12.2018 End date for End date
3 31.12.2019 31.12.2019 31.12.2017 31.12.2017 31.12.2018 Unit Supplementary - m - - - -
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
)
1
)
1
,
3
— 1 % or more but not more than 40 % of molybdenum oxide, more but not than 40 % or more — 1 % of nickel oxide, but than 50 % or more not more — 10 % of tungsten oxide but than 70 % or more not more — 30 following characteristics: — a melting point of between 1 600 °C and 1 800 — 0,8 g/cm 0,6 – °C, of density a % of copper, % or more, but not more than 85 — 75 oxides, — inorganic and cellulose, — ethyl solvent — a weight: by 1344-28-1), containing % of platinum, and % or more but not than 1 — 0,1 (CAS RN % of ethylaluminium dichloride 563-43-9) % or more but not than 5 — 0,5 containing by methyl esters acid weight at least: Mixture of fatty % of C12 FAME, but than 75 % or more not more — 65 % of C14 FAME, but than 28 % or more not more — 21 % of C16 FAME, more but not than 8 % or more — 4 ( of detergents and for use in the manufacture home and products personal care for use in the manufacture of particle filters in motor vehicles ( in motor vehicles filters of particle use in the manufacture for Description Reaction product, containing by weight: by containing product, Reaction dioxide silicon and with the % amorphous aluminosilicate, containing Hollow 65-80 spheres of fused aluminosilicate 2,4,7,9-tetramethyldec-5-yne-4,7-diol of weight: consisting by Preparation, containing Paste Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 20 29 73 75 77 79 87 TARIC CN code ex 3826 00 10 ex 3824 90 96 ex 3824 90 96 ex 3824 90 96 ex 3824 90 96 ex 3826 00 10 ex 3824 90 96
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 109
review mandatory 31.12.2018 31.12.2018 End date for End date
3 3 31.12.2018 31.12.2018 31.12.2019 31.12.2016 Unit Supplementary - - - m m -
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 , and
3
3
)
1
)
1
or more, but not than 0,926 more g/cm
3 or more, but not more than 0,928 g/cm
3
)
1 and — a vicat softening temperature of min. 94 °C 94 min. of temperature softening vicat — a Mixture of fatty acid methyl esters containing by methyl esters acid weight at least: Mixture of fatty % of C8-FAME but than 58 % or more not more — 50 % of C10-FAME but than 50 % or more not more — 35 and (animal human) chemistry, food for use in of agricultural the ingredients, additives manufacture ( components solvents, lamp oil and to lubricant, firelighter containing by methyl esters acid weight at least: Mixture of fatty % of C16 FAME but than 32 % or more not more — 15 % of C18 FAME but than 85 % or more not more — 65 of detergents and for use in the manufacture home and personal cleaning products, agricultural chemistry, (animal and human) food ingredients, additives to solvents, lubricant, lamp oil and ( firelighter components of form 25087-34-7) RN polyethylene-1-butene/LLDPE (CAS in density low linear High flow powder, with — (MFR 190 rate °C/2,16 flow kg) of 16g/10min a melt than 24 or more, but not more g/10 min g/cm 0,922 of 1505) D (ASTM density — a comonomer, of weight by % 5 than more — not — of 15 g/10 flow rate min or more, but not more than 60 a melt g/10 min and g/cm 0,922 of density — a than not more value haze a of blown films of manufacture the for 0,05 g/10 min), (± 0,3 g/10 min ( % and an elongation of 210/340 at break (MD/TD) 6 Description with powder, of form the in 9002-88-4) RN (CAS (LLDPE) polyethylene low-density Linear Polyethylene, gravity of 0,925 in the form of granules, a specific 0,0015), (± a melt flow index of % of copper % or more but not more than 25 Polyethylene granules, containing by weight 10 30 40 20 39 49 50 40 20 30 TARIC
CN code ex 3826 00 10 ex 3826 00 10 ex 3901 10 90 ex 3826 00 10 ex 3901 90 ex 3901 10 90 ex 3826 00 10 *ex 3901 10 *ex 3901 10 ______
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 110
review mandatory 31.12.2018 31.12.2020 31.12.2020 End date for End date
3 3 3 31.12.2018 31.12.2020 Unit Supplementary m - m - m
duty 0 % 0 % 0 % 0 % Rate of autonomous
,
3
0 % 0 ; and
2
or more, but not more than 0,913 or more, g/cm
3 of not more than 20 mm
3
)
1 and — a gel area per 24,6 cm 24,6 per area gel — a — an anti-oxidant level not exceeding 240 ppm 240 exceeding not level anti-oxidant — an 0,945 ribbon or similar or more but not than 0,985, for typewriter of films for the manufacture ribbon ( — % by weight (ASTM D4094), % or more but not than more 49,5 acid content of 18,5 an acrylic — of 14g/10 flow rate min (MFR a melt 125 °C/2,16 kg, ASTM D1238) or more % by weight, and but than % or more not more 50 — content of 6 acid an acrylic 190 of 1g/10 at — min or more °C/2,16 rate flow using kg a melt ASTM (measured D1238) food packaging with: flexible for films processing of % by weight of octene, but than 20 % or more not more — 10 min, g/10 0,6 of 9,0 — or more, but not than 10,0 flow ratio more a melt (using ASTM D1238 10,0/2,16), than more not but min g/10 0,4 of kg) °C/2,16 (190 index melt — a g/cm 0,909 of D4703) (ASTM density — a Description Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with 9010-77-9) RN (CAS acid Polyethylene, mentioned in one in note of the forms gravity of to Chapter 39, 6 (b) of a specific acrylic and % of mica but not than 45 % or more more Polyethylene, containing by weight 35 ethylene of Copolymer acid copolymer, Zinc or sodium with: of an ethylene and salt acrylic used of pellets in the co-extrusion low-density polyethylene in the form (LLDPE) Octene linear 10 20 53 55 57 TARIC
CN code ex 3901 90 ex 3901 90 ex 3901 20 90 ex 3901 20 90 *ex 3901 90 ______
M5 M4 M5 M4 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 111
review mandatory 31.12.2020 31.12.2018 End date for End date
3 3 31.12.2020 31.12.2020 31.12.2020 31.12.2018 Unit Supplementary m m - - -
- duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
3 4%
)
1
3
)
1
or more, but not more than 0,913 or more, g/cm
3 or more, but not more than 0,928 g/cm
3 min, and form of pellets with: form of pellets % by weight of copolymer, % but not more than 20 — than more 10 — (MFR 190 flow rate °C/2,16 a melt kg) of 0,7 g/10 min or more but not more than 0,9 g/10 g/cm 0,911 of D4703) (ASTM density — a % by weight of comonomer, %, but not more than 8 — than 5 more — of 15 g/10 flow rate min or more, but not more than 60 a melt g/10 min and g/cm 0,922 of density — a % by weight or more 11 acid content is crylic of 1,3 rate g/10 melt flow at 190 min or more °C/2,16 kg using (measured ASTM D1238) — gravity of 0,862 or more, but with a specific not more than 0,865, length, original its % — 200 least to at to stretch able — with a %, hysteresis of 20 50 % than more (± not 10 %), of deformation permanent — with ( babies of napkin for for use in the manufacture liners for use in the co-extrusion processing of films for flexible food packaging ( food packaging flexible for use for in the co-extrusion processing of films Description Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the in method catalyst Ziegler-Natta a with by powder, produced of (LLDPE) form polyethylene the low-density in a 9002-88-4) linear with RN Octene comonomer, (CAS olefin (LLDPE) another polyethylene containing low-density not Linear or whether copolymer, anhydride acid monomers in which ethylene and the metha Copolymer methacrylic made exclusively from maleic Ethylene Block copolymer of ethylene with octene in the form pellets: acid of a copolymer consisting of ethylene with methacrylic of a salt Ionomer resin 63 65 67 70 80 91 TARIC
CN code ex 3901 90 ex 3901 90 *ex 3901 90 *ex 3901 90 *ex 3901 90 *ex 3901 90 ______
M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 112
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
0 % 0
)
1
)
1 ASTM D 638 method) facture of roof sheets ( facture of roof sheets copolymer and polystyrene, containing by polystyrene, ethylene-butylene of block copolymer % of styrene weight not more than 35 aluminium, of mg/kg — 7 iron, of mg/kg — 2 magnesium, of mg/kg — 1 chloride of mg/kg — 8 — point of more than 150 of a melting by ASTM determined °C the (as D 3417 method), — of fusion 15 but than of a heat J/g or more not more 70 J/g, 000 by (as determined % or more the ASTM D 638 method), — of an elongation at break of 1 — modulus of a tensile of 69 MPa or more but not more than 379 by MPa (as determined the disposable of packaging contact for manufacture magnesium use in the and 1 mg/kg chloride, for of lenses ( Description Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticiser in the manu the in plasticiser a as use for monoxide, carbon and acetate vinyl polyethylene ethylene, Chlorosulphonated of powder Copolymer than: of more form not the and in A-B block copolymer Mixtures of of polystyrene and ethylene-butylene copolymer and A-B-A plasticiser polyethylene, no Chlorinated containing Polypropylene plasticiser, no containing Polypropylene, mg/kg aluminium, 0,05 iron, 1 of mg/kg 1 mg/kg of Polypropylene, of than containing not more 92 93 94 97 10 20 30 TARIC CN code ex 3901 90 ex 3901 90 ex 3901 90 ex 3902 10 00 ex 3902 10 00 ex 3902 10 00 ex 3901 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 113
review mandatory 31.12.2020 End date for End date
3 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2016 Unit Supplementary - m - - - -
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
(as determined
2 (as determined by test method
3
) of 700 or more but not more than 800
n
or more but not more than 390 kg/cm 0 % 0
2 or more but not more than 0,913 g/cm
3
) 1 D1238 method); ASTM D1505), by test method ASTM D638) by test ( method ASTM 648) — of 32-60 by strength: MPa (as determined ASTM the of a tensile D638 method); — strength of 50-90 by MPa (as determined the ASTM of a flexural D790 method); — ASTM by the determined (as 5-15 g/10 min 230 °C/2,16 kg of at (MFR) Flow Rate Melt a of % by weight of polypropylene, but not than 80 % or more more — with 40 % by fibre, weight of glass but not than 30 % or more more — with 10 % by weight of mica but not than 30 % or more more — with 10 plastic components for air freshener with the following properties: g/cm 0,880 of density — a mentioned % or less of styrene, in one in note 6 (b) to Chapter 39 of the forms 40 and ethylene, and propylene of copolymer — a by %) weight of polystyrene 3 % (± — 21 — a tensile strength at yield of 350 kg/cm 350 of yield at strength tensile — a — of 135 temperature a heat deflection °C or more under load of 0,45 MPa by (as determined test Description High isotactic polypropylene (HIPP), whether or not coloured, intended for the manufacture of manufacture the plasticiser: for no intended containing coloured, Polypropylene, not or whether (HIPP), polypropylene weight (M isotactic by weight High containing molecular copolymer, average ethylene-propylene number an form a and liquid of polystyrene in Polyisobutylene, of polyisobutene, copolymer Hydrogenated of: Block consisting A-B copolymer, block A-B-A 40 50 10 20 91 95 TARIC CN code ex 3902 20 00 ex 3902 20 00 ex 3902 30 00 ex 3902 30 00 ex 3902 10 00 *ex 3902 10 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 114
review mandatory 31.12.2018 End date for End date
3 31.12.2016 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2016 31.12.2016 Unit Supplementary ------m -
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
) of 650 or more
n ), containing 50 % recycled material ), containing 50
3 0 % 0 (± 1,5 kg/m
3
— a flashpoint of 250 °C or more, — a viscosity index of 150 or more, (M weight molecular average number a — of hydrocarbon resin % of polystyrene % or more but not than 35 and polystyrene containing by weight 10 temperature room at — liquid monomers alkenes C-5 of polymerisation cationic by — obtained 50) (± 370 of (Mn) weight molecular average number a — with 100) (± 500 of (Mw) weight molecular average weight a — with D 445) ranging from 3 centistokes to 9 centistokes and obtained by polymerization of a mixture of % of tetradecene dodecene containing and a maximum of 40 tetradecene, 14,0 density of kg/m — point of 268 a melting °C or more but not than 272 °C — point of 232 a setting °C or more but not than 247 °C, material filling and additives containing not or — whether Description Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene polystyrene, of petroleum with: structure and ethylene-propylene-copolymer copolymer poly(propylene-co-1-butene) Liquid of block a blend A-B-A ASTM copolymer at an poly-alpha-olefin method W/mK with Amorphous to 0,034 elastomer, according than Thermoplastic (measured more °Celsius not 100 of % aliphatic resin (polymer), with the following characteristics: Non-hydrogenated 100 at conductivity 4-methylpent-1-ene viscosity thermal of a a Polymers with with poly-alpha-olefin beads Chlorinated polyolefins, whether or not in a solution or dispersion Synthetic polystyrene expandable with: White polystyrene Crystalline 97 52 55 60 92 94 98 10 40 TARIC CN code ex 3902 90 ex 3902 90 ex 3902 90 ex 3902 90 ex 3902 90 ex 3902 90 ex 3903 11 00 ex 3903 19 00 ex 3902 30 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 115
review mandatory 31.12.2016 End date for End date
3 31.12.2016 31.12.2016 31.12.2016 31.12.2016 31.12.2018 Unit Supplementary m - - - - -
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
-methylstyrene and styrene, having -methylstyrene a softening point of more than 113 °C α
— a specific gravity of 1,05 (± 0,02), (± 1,05 of gravity specific — a g/10 min) 1 (± g/10 min 13 — kg of 200 °C/5 at index flow melt a styrene, % 4 ± — 78 acrylate, n-butyl % 2 ± — 9 methacrylate, n-butyl % 3 ± — 11 and acid, methacrylic % 0,7 ± — 1,5 % of polyolefinic wax more but not than 2,5 % or more — 0,01 styrene, % 3 ± — 83 acrylate, n-butyl % 2 ± — 7 and methacrylate, n-butyl % 2 ± — 9 % of polyolefinic wax more but not than 1 % or more — 0,01 styrene, % 6 ± — 82 acrylate, n-butyl % 3 ± — 13,5 and acid, methacrylic % 0,5 ± — 1 % of polyolefinic wax more but not than 8,5 % or more — 0,01 by weight: triazine, % of tris(tribromophenyl) more but not than 4 % or more — 2 % of ethane-1,2-bis(pentabromophenyl), more but not than 10 % or more — 5 % of antimony trioxide more but not than 5 % or more — 3 Copolymer of Description Copolymer in the form of granules containing by weight: with: by granules, containing or granules pellets of copolymer weight: form Butadiene-styrene by the containing in granules Copolymer of weight: form by the containing in granules Copolymer of form the in Copolymer Butadiene-styrene copolymer or granules pellets with a melting point of 85 °C (± 5 °C), containing 35 43 10 15 20 25 30 TARIC CN code ex 3903 90 90 ex 3903 90 ex 3903 90 ex 3903 90 ex 3903 90 ex 3911 90 99 ex 3903 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 116
review mandatory 31.12.2019 31.12.2020 31.12.2020 End date for End date
3 3 3 31.12.2018 31.12.2019 31.12.2016 31.12.2020 31.12.2018 Unit Supplementary - m m - - - m -
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m and a μ
)
1
) of not more than 4 500, in flake or powder 500, form in flake than 4 of not more )
n
m and containing by weight: -methylstyrene and acrylic acid, of a number average molecular weight molecular a number average acid, of and acrylic -methylstyrene μ α
) of 500 or more but not more than 6 000 ) of 500 but or more not more than 6
n maximum diameter of 800 of maximum diameter Copolymer of styrene with styrene Copolymer of and % of styrene-acrylic-copolymer, but than 90 % or more not more — 86 acid ethoxylate (CAS RN 9004-81-3) % of fatty more but not than 11 % or more — 9 styrene, %) 4 (± % — 74 and n-butylacrylate %) 2 (± % — 24 acid % methacrylic more but not than 2 % or more — 0,01 and % of styrene-acrylic-copolymer, but than 26 % or more not more — 25 % of glycol more but not than 6 % or more — 5 chemically completely or esterified partially anhydride, either maleic with styrene Copolymer of weight (M molecular modified, of an average powder (CAS RN 26762-29-8) and styrene %) 7 (± % — 75 methylmethacrylate %) 7 (± % — 25 styrene, % 65 — minimum divinylbenzene % 25 — maximum ( of ion for use exchange in the manufacture resins (M Description Preparation, in form of powder, containing by weight: by containing weight: powder, by of containing form weight: granules in by of Preparation, containing form suspension, the aqueous in an Copolymer of form weight: in by Preparation, containing granules of form the Copolymer with 2, of Styrene 5-Furandione or and in the form of flakes (1-methylethyl)benzene in Copolymer Granules of copolymer of styrene and divinylbenzene of 150 of a minimum diameter 40 60 50 60 45 46 55 65 70 80 TARIC CN code ex 3903 90 90 ex 3903 90 90 ex 3903 90 ex 3903 90 ex 3903 90 ex 3903 90 ex 3903 90 ex 3911 90 99 ex 3911 90 99 *ex 3903 90
M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 117
review mandatory End date for End date
31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2019 Unit Supplementary - - - - -
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 )
1
m of not more than 1 % by weight, m of not more than 1 μ
)
1 )
1
pigment scale CIELab colour and 7 on the of headings 3215 or 8523 of coatings or for use in containers and the manufacture for closures ( of a kind used for preserving food and drink for use in the manufacture of battery separators ( separators of battery for use in the manufacture — 45 % or more but not more than 65 % of polymers styrene but than 65 % or more not more — 45 % of poly(phenylene ether) but than 45 % or more not more — 35 % of other additives — not more than 10 flake-based % and colour effects: of the following with one special or more 0,3 least at by caused metamerism angular visual a with pearlescent or — metallic — radiation light during by absorption emitting of ultraviolet as characterized fluorescent, — than 92 than 2 and a* between -5 and b* not more by L* not less characterized white, as bright monomers, with: 000 300) (± monomer units, — of polymerisation 1 a degree — of 60 or more, but not more than (K-value) transmission of heat a coefficient 70, % by weight, — than 2,00 content of less material a volatile — at a mesh width a sieve non-passing of 120 fraction and vinyl alcohol, containing by weight: Copolymer vinyl with vinyl acetate of chloride % of vinyl chloride, but than 92 % or more not more — 87 and % of vinyl acetate, more but not than 9 % or more — 2 % of vinyl alcohol, more but not than 8 % or more — 1 — of goods manufacture the to Chapter 39, for (b) or mentioned in note 6 (a) the forms in one of of a aqueous in the form emulsion of methyl acrylate, %) 1 % (± chloride and 20 Description Mixture containing by weight: by containing Mixture powder, Poly(vinyl not mixed chloride) with any other substances or containing any vinyl acetate ( monofilaments of manufacture the in use for co-polymer of vinyl %) 1 % (± Copolymer containing by and of vinyl chloride methyl acrylate, weight 80 methacrylate Vinylidene-chloride 30 91 86 20 93 92 TARIC CN code ex 3904 30 00 ex 3904 10 00 ex 3904 40 00 ex 3904 40 00 ex 3904 50 90 ex 3903 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 118
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2020 31.12.2017 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2017 31.12.2017 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 m μ
/g or more but not
2 m and 90 % of less than 35 % of less m and 90 μ 0 % 0
0 % 0 0 % 0
0 % 0
m
μ
) of 25 000 or more but not more than 150 000 and containing by 000 or more but not than more 150 ) of 25
w /g, a particle size distribution of 10 % of less than 10 of 10 distribution size /g, a particle
2
)
1 than 12 m and an average particle size of 20 of size particle average and an weight: and groups evaluated as vinyl % of acetyl acetate, % or more but not than 13 — 9,5 % of hydroxy groups evaluated as vinyl alcohol more but not than 6,5 % or more — 5 more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than and less trifluoro(heptafluoropropoxy)ethylene by weight of % than 4,6 but not more more ions fluoride extractable 1 mg/kg of fillers with not or powder, whether butylene, in Chapter 39 of semicon during manufacturing the coating of wafers use as protective for solvent and water ductors ( % by weight of ethylene than 32 solution in water a of % of vinylpyrrolidone, in the form more but not than 99 weight (M average molecular Description 24937-79-9) more organic % or containing and Copolymer 3,2 trifluoro(heptafluoropropoxy)ethylene, of tetrafluoroethylene RN not an (CAS containing 9002-89-5), of 8 m surface of powder, in the form of a specific Polytetrafluoroethylene, fluoride) 26221-27-2), RN Poly(vinylidene tetrafluoroethylene RN (CAS and (CAS alcohol) difluoride whether or not modified with hexafluoroiso Copolymer of ethylene with chlorotrifluoroethylene, ethylene alcohol poly(vinyl vinylidene of vinyl and of to mentioned in note 6 (b) forms in one of the Copolymer ethylene with chlorotrifluoroethylene, of Copolymer chlorotrifluoroethylene and consisting of essentially ethylene Chapter 39 to and (b) mentioned in note 6 (a) the forms in one of Polychlorotrifluoroethylene, Copolymer preparation, of Viscous copolymer soluble Water polyvinylpyrrolidone eicosylated or % or containing Polymer of vinylpyrrolidone by and dimethylaminoethyl methacrylate, weight 97 Hexadecylated weight to Chapter 39, of a mentioned in note 6 (b) forms the in one of of vinyl formal, Polymer 20 30 81 85 93 94 96 97 10 30 92 95 96 TARIC CN code ex 3904 61 00 ex 3904 69 80 ex 3904 69 80 ex 3904 69 80 ex 3904 69 80 ex 3904 69 80 ex 3905 30 00 ex 3905 99 90 ex 3905 99 90 ex 3905 99 90 ex 3904 61 00 *ex 3904 69 80 *ex 3905 91 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 119
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2017 31.12.2018 31.12.2020 31.12.2018 31.12.2020 31.12.2020 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous m or more μ
) 1
m μ
0 % 0 ) of more than 500 000 but not more than 1 200 000 200 000 but not more than 1 than 500 of more ) s at 120 method s at by ASTM °C as determined the test D
w ·
) of 500 or more but not more than 6 000 ) of 500 but than or more not more 6
n
m μ
m, insoluble in water μ
according to the Gel Permeation Chromatography according to the Gel Permeation (GPC) test, 3835 more but not more than 82 % of triacontyl groups % of triacontyl more but not than 82 ( of heading of medicaments 3003 manufacture or 3004 stabilizer palmitate weight (M average molecular than 10 more but not 18 than not more of 3 an form with diameter average in microsphere Pa 000 50 than more not of viscosity — a group whether or not % mixed or more of methyl acrylate, as a substituent, containing by weight 50 with silicon dioxide % 1 than less of content monomer residual — a — weight (M molecular a weight average Description Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or % 78 weight by containing groups, 25655-41-8) triacontyl RN by (CAS substituted isopropyl (INN)-iodine partially in Povidone pyrrolidone) dissolved Poly(vinyl with: acid, sale acrylic and retail acrylate for isooctyl not methacrylate, the polyunsaturated monomer, for of a quantities acid with small product acrylic of Polymerization and 28931-67-1), stearyl kg, RN of and (photoinitiator) monomer, catalyst acrylic acrylate, modified consisting of resin Photosensitive 1 (CAS Copolymer than methacrylate more methyl not Copolymer of styrene with hydroxyethyl and of a 2-ethylhexyl number methacrylate acrylate, and of trimethacrylate of 5 size particle with a and alkyl methacrylate, Core shell copolymer of butyl acrylate packages trimethylolpropane in of size of copolymer of a particle White powder methacrylate of 1,2-ethanediol dimethacrylate-methyl polymer Copolymer acrylic Transparent Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy non-terminal a containing monomer a and ethylene with acrylate methyl of 97 98 Copolymer 10 15 27 30 33 35 37 40 TARIC CN code 3906 90 60 3906 90 ex 3905 99 90 ex 3906 90 ex 3906 90 ex 3906 90 ex 3906 90 ex 3906 90 ex 3905 99 90 *ex 3906 90 *ex 3906 90 *ex 3906 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 120
review mandatory End date for End date
31.12.2019 31.12.2016 31.12.2018 31.12.2018 31.12.2019 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0 0 % 0
— a melting point of 96 °C (± 3 °C), 3 (± °C 96 of point melting — a — gravity of 1,03 or more but not than 1,07, a specific and containing by weight: and % of acrylonitrile-butadiene-styrene, but than 50 % or more not more — 25 % of methylmethacrylate but than 75 % or more not more — 50 ether, vinyl — chloromethyl ether, vinyl — chloroethyl — chloromethylstyrene, chloroacetate, — vinyl acid, — methacrylic ester, monobutyl acid — butenedioic % of each of the monomeric units, in one of the forms containing by weight not more than 5 mentioned to Chapter in note 6 (b) 39 (DSC) Scanning Calorimetry °C), measured with Differential acid copolymer, — methacrylic % of butyl methacrylate but not than 37 % or more more — 33 % of propylene glycol, and but than 28 % or more not more — 24 % of water but than 41 % or more not more — 37 Description Poly(alkyl acrylate) with an ester alkyl chain of C10 to C30 to C10 of chain alkyl ester an with with: acrylate) pellets Poly(alkyl copolymer Acrylonitrile-butadiene-styrene-methylmethacrylate acid with one or more of the following of acrylic monomers in the chain: Polymers of esters weight: by of 65 °C (Tm) (± 5 modified with cobalt, a melting temperature chemically Polyalkylacrylate, containing Preparation polymethacrylates) Polydimethylsiloxane-graft-(polyacrylates; 41 45 50 65 73 80 TARIC CN code ex 3906 90 ex 3906 90 ex 3906 90 ex 3906 90 ex 3906 90 ex 3906 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 121
review mandatory End date for End date
31.12.2020 31.12.2020 31.12.2018 31.12.2018 31.12.2016 31.12.2016 31.12.2017 31.12.2018 31.12.2018 31.12.2019 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
- -[3-[3- ω ω 0 % 0
0 % 0 ) of 100 000 or more ) of 100
n
0 % 0
) of 40 000 ) of 40
n
) of 3 500 (± 100) ) of 3
n phenylene oxide) in the form of powder of form the in phenylene oxide) p- -[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]- -[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]- α hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2) and α (2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly(oxy-1,2- ethanediyl) (CAS RN 104810-47-1)
-vinyl-2-pyrrolidone of terephthalic acid and acid 1,4-phenyldiamine of terephthalic weight (M molecular number average 104810-48-2) RN hydroxypoly(oxo-1,2-ethanediyl) (CAS — — 100 RN 25190-06-1) (CAS 3 than not more and % of a copolymer of dibutyl maleate % or more but not than 1,2-epoxypropane more 30 and 20 N weight (M Poly( °C, 210 of glasstransitiontemperature a — with 000, 000 but or more not more than 80 — of 35 weight (Mw) with a weight average molecular — viscosity of 0,2 but with an inherent or more not more than 0,6 dl/gram Description Polyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer a of fibers and polytetrafluoroethylene (M polydimethylsiloxane and weight containing trioxan-oxirane-copolymer molecular endcaps, a average a acetyl of number of with Mixture a lysine, Polyoxymethylene of with oxide) modified Poly(ethylene chemically Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, [3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]- containing: molecular Preparation average number a with tetrahydro-3-methylfuran and 700 or more but of 2 weight (Mw) molecular glycol with a weight average ether Polytetramethylene tetrahydrofuran % of a polymer of glycerol and % or more but not more than 80 Mixture, containing by weight 70 of Copolymer end-groups alkoxysilyl having Poly(oxypropylene) 50 75 10 20 10 20 50 60 20 30 40 15 TARIC CN code ex 3907 20 20 ex 3907 10 00 ex 3907 20 11 ex 3907 10 00 ex 3907 20 11 ex 3907 20 11 ex 3907 20 11 ex 3907 20 ex 3907 20 ex 3907 20 ex 3907 20 99 ex 3907 20 99
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 122
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2016 31.12.2018 31.12.2019 31.12.2020 31.12.2020 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0
0 % 0
-methoxy, polyoxyethylene (CAS RN 883993-35-9) ω 0 % 0
aminobenzoate -p-
-hydroxysuccinimidyl ester.alpha.,.epsilon.-bis(polyethylene glycol monomethylether glycol -hydroxysuccinimidyl ester.alpha.,.epsilon.-bis(polyethylene
)
N 1 bound in the epoxide resin, epoxide the bound in and and -[3-(3-Maleimido-1-oxopropyl)amino]propyl- in the form of a solution acetate in 2-methoxy-1-methylethyl perfluoropolyether polymer as the main ingredient terminated the same type of vinyl-silyl 000 weight (Mn) of 5 000 or (CAS RN of 38 266318-38-1) weight (Mn) carbamate) molecular of a number average 000 more but not than 40 α solid content, chemically on the phosphoros% calculated — than 2 containing by weight more — than 300 ppm hydrolysable chloride, containing less or not containing any hydrolysable chloride solvents — containing for use of prepreg sheets or rolls a kind in the manufacture used for the production of printed circuits ( brome, % or more of — containing by weight 21 — than 500 ppm hydrolysable chloride, containing less or not containing any hydrolysable chloride solvents — containing Description Polyethylene glycol chemically modified with an isocyanate group containing a carbodiimide group, carbodiimide a containing group isocyanate an with (epichlorohydrin) modified 1-chloro-2,3-epoxypropane of chemically Homopolymer glycol Polyethylene and propylene oxide, having aminopropyl methoxy end-groups oxide ethylene Copolymer of of two components polymer or an assortment consisting of perfluoropolyether terminated Vinyl-silyl di oxide of methoxy poly(ethylene Succinimidyl ester molecular glycol)propionic acid, of a number average Polytetramethylene L-Lysine halogen-free, resin, Epoxide resin Epoxide 30 35 45 50 55 60 65 70 15 25 TARIC CN code ex 3907 30 00 ex 3907 20 99 ex 3907 20 99 ex 3907 20 99 ex 3907 20 99 ex 3907 20 99 ex 3907 20 99 ex 3907 20 99 ex 3907 30 00 ex 3907 20 99
M5 M4 ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 123
review mandatory 31.12.2016 End date for End date
3 31.12.2018 31.12.2018 31.12.2017 31.12.2018 31.12.2019 31.12.2019 31.12.2018 31.12.2017 Unit Supplementary ------m -
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
-(1- ′
0 % 0
)
1
-(1-methylethylidene)bis[2,6-dibromophenol] and 4,4 and -(1-methylethylidene)bis[2,6-dibromophenol] ′
m of polyamide, m of polyethylene, μ μ -phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo- ω
cumylphenol endcaps, and cumylphenol endcaps, p- chloride, terephthaloyl chloride and chloride, terephthaloyl chloride resorcinol, -Phenoxycarbonyl- — not more than 50 than more — not Epoxide resin, containing by weight 70 % or more of silicon dioxide, % or more for the encapsulation of goods Epoxide resin, containing by weight 70 ( 8548 or 8542 8536, 8541, 8533, 8535, headings of solvent, with: % by weight, — borate hydrate content of not more than 40 a zinc % by weight — content of not more than 5 a diantimony trioxide α 94334-64-2) RN 1,4-phenylene)oxycarbonyl] (CAS a copolymer of isophthaloyl % of but % or more not more than 26 — containing by weight 12 — with 900 900 or more but not more than 31 — of 29 weight (Mw) with a weight average molecular methylethylidene)bis[phenol] with 4-(1-methyl-1-phenylethyl)phenol endcaps hexane-1,6-diol — gravity of 1,23 or more but not than 1,27 with a specific at 23 °C, and or additives modifiers % by weight of other — containing not more than 10 75 than more — not Description Liquid epoxide resin of 2-propenenitrile/1,3-butadiene-epoxide copolymer, not containing any containing not copolymer, 2-propenenitrile/1,3-butadiene-epoxide 118549-88-5) of RN resin (CAS epoxide Liquid resin ether polyglycidyl A: Polyglycerol bisphenol and phosgene of of: 4,4 Polycarbonate laminate dichloride, a carbonic from of granules: manufactured Polycarbonate or polymers) pellets sensitive terephthalate) and acid Copolymer isophthalic acid with ethylene glycol, butane-1,4-diol and of terephthalic oxygen Poly(ethylene (for packages Flexible 40 70 50 60 35 70 80 10 40 50 TARIC CN code ex 3907 30 00 ex 3907 40 00 ex 3907 30 00 ex 3907 30 00 ex 3907 40 00 ex 3907 60 80 ex 3907 60 80 ex 3907 60 80 ex 3926 90 97 *ex 3907 40 00
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 124
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2017 31.12.2020 31.12.2019 31.12.2017 31.12.2019 31.12.2020 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
/
3 0 % 0 0 % 0
0 % 0
0 % 0
cumylphenolendcaps, and a weight average molecular weight (Mw) of (Mw) weight molecular average weight a cumylphenolendcaps, and m of polyethylene terephthalate, and m of polyethylene terephthalate,
m of aluminium μ
p- μ
/24 hrs at 0,1 /24 hrs at MPa
2 with a tensile strength of more than 70 N/15 mm and oxygen of less than 0,1 transmission rate cm m — not more than 9 than more — not from benzenedicarboxylic acids, ethylene glycol and polybutadiene substituted by hydroxy groups fillers cyclohexanedimethanol poly(3-hydroxybutyrate) of consisting Poly(hydroxyalkanoate), predominantly andpolysiloxane, with 900 100 or more but not than 25 24 dimethanol cyclohexane of by weight dioles cyclic and/or linear with and cyclohexanedimethanol, completed 39 Chapter to 6 (b) etherdiamine — not more than 15 than more — not Description Oxygen binding copolymer (as determined by the ASTM D 1434 and 3985 methods), obtained methods), 3985 and 1434 D ASTM the by powder determined of (as form form copolymer powder the binding in in Oxygen prepolymer, 26099-71-8), chloride % phthalate RN terephthaloyl 10 Diallyl (CAS chloride, than Poly(oxy-1,4-phenylenecarbonyl)isophthaloyl more resorcinol, containing A, not containing than 270 °C, or of not less whether point melting with a copolyester Liquid crystal dimethanol, poly bisphenol % by acid and/or isomers thereof and weight or more of terephthalic Copolymer, containing 72 cyclohexane note aliphatic phosgene, and an in of with terephthalate) Polycarbonate mentioned polymerised poly(ethylene forms acids of the octadecanecarboxylic bisphenol A with acid and isophthalic acid terephthalic Copolymer of Copolymer of of one mixtures in thereof acid and/or derivatives % by more of terephthalic weight or Copolymer, 72 consisting of of Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), product Reaction 30 20 Poly(lactic acid) 60 Poly(lactic 10 10 20 25 40 60 70 80 10 30 TARIC CN code 3907 70 00 3907 70 ex 3907 91 90 ex 3907 99 90 ex 3907 99 90 ex 3907 99 90 ex 3913 90 00 ex 3907 99 90 ex 3907 99 90 ex 3907 99 90 ex 3908 90 00 ex 3908 90 00 ex 3907 60 80 *ex 3907 99 90 *ex 3907 99 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 125
review mandatory End date for End date
31.12.2020 31.12.2017 31.12.2019 31.12.2018 31.12.2020 31.12.2017 31.12.2018 31.12.2019 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
m μ
90 % 15 % powder form (CAS RN 169284-22-4) powder form acid — hexanedioic acid — 12-aminododecanoic and — hexahydro-2H-azepin-2-one, — 1,6-hexanediamine and 1477-55-0), RN (CAS — 1,3-benzenedimethanamine 124-04-9) RN (CAS acid — adipic whether or not containing acid (CAS RN 121-91-5) isophthalic of less than 150 ( and devices photocopiers, multifunction of ink for fax machines, printers the manufacture and brominated, not or whether resin, formaldehyde — — alkylphenol oxide — zinc — % by weight or more but not phenolic more than resin polymer (CAS RN 9003-35-4) with 80 and %, 5 than more not with 108-95-2) RN (CAS — phenol than but not more % by weight or more — (CAS RN 100-97-0) with 5 hexamethylenetetramine polyurethane oligomers, and acrylated of two-functional % or more — 60 and acrylates, (metha) of mono-functional and tri-functional %) 8 % (± — 30 acrylates of hydroxyl mono-functional %) (metha) functionalized 3 % (± — 10 Description 1,4-Benzenedicarboxylic acid polymer with 2-methyl-1,8-octanediamine and 1,9-nonanediamine in 1,9-nonanediamine and in 2-methyl-1,8-octanediamine use with polymer for acid distributed, of: 1,4-Benzenedicarboxylic evenly consisting been Copolymer have particles magnetic containing: which Copolymer in of resin of: weight thermosetting content by of a mixture Polycondensation product of phenol of hollow with formaldehyde, in the form spheres of a diameter Powder with a of: form of Mixture powder consisting in photopolymer Polymer liquid soluble water curable UV 45 60 70 10 20 30 40 10 TARIC CN code ex 3908 90 00 ex 3908 90 00 ex 3909 40 00 ex 3909 40 00 ex 3909 40 00 ex 3909 50 90 *ex 3908 90 00 *ex 3909 40 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 126
review mandatory End date for End date
31.12.2019 31.12.2019 31.12.2019 31.12.2020 31.12.2018 31.12.2016 31.12.2017 31.12.2019 31.12.2018 31.12.2019 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0
groups, groups, groups, — 14 % or more but not more than 18 % of ethoxylated polyurethane modified with hydrophobic with ethoxylated polyurethane modified % of than 18 — but not more or more % 14 and modified starch, % of enzymatically more but not than 5 % or more — 3 % of water but than 83 % or more not more — 77 hydrophobic with ethoxylated polyurethane modified % of than 20 — but not more or more % 16 and % of diethylene glycol butyl ether, but than 23 % or more not more — 19 % of water but than 64 % or more not more — 60 hydrophobic with ethoxylated polyurethane modified % of than 36 — but not more or more % 34 % of propylene glycol, and but than 39 % or more not more — 37 % of water but than 28 % or more not more — 26 terminated nylsiloxane) gum methacrylate end groups conductor devices Description Preparation containing by weight: by containing Preparation weight: by containing implants Preparation weight: surgical trimethylsiloxy- by term 68957-00-6), containing long RN Preparation of (CAS manufacture siloxane the poly[methyl(vinyl)siloxane] with oxide)) in and substituted, methyl(propyl(polypropylene used poly(methyl-3,3,3-trifluoropropylsiloxane) trifluoropropyl Dimethyl, and kind of glycol a copolymer polyethylene of Block not Silicones or whether adhesive in solvent containing copoly(dimethylsiloxane/diphe sensitive based pressure Silicone Polydimethylsiloxane, poly(dimethylsiloxane) in semi edges and to prevent short circuits protect form, Passivating silicon coating in primary Monomethacryloxypropylterminated 20 30 40 15 20 40 50 60 70 80 TARIC CN code ex 3910 00 ex 3910 00 ex 3909 50 90 ex 3909 50 90 ex 3910 00 ex 3910 00 ex 3910 00 ex 3910 00 ex 3910 00 ex 3909 50 90
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 127
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2017 31.12.2016 31.12.2019 31.12.2019 31.12.2019 31.12.2018 31.12.2020 31.12.2020 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0 0 % 0
0 % 0 0 % 0 butyl-phenol (CAS RN 60806-48-6)butyl-phenol (CAS tert-
-biphenylene) ′ 0 % 0
0 % 0 -methylstyrene α
0 % 0
-((1-methylethylidene)di-4,1-phenylene) ester, homopolymer ester, (CAS RN -((1-methylethylidene)di-4,1-phenylene) 25722- ′
ASTM method D6166) 66-1), Xylene formaldehyde resin to C-12 cycloaliphatic alkenes and more than 10 % but not more than 25 % by aromatic weight % than 25 % but not more than 10 alkenes and more to C-12 cycloaliphatic with: alkenes yielding a hydrocarbon resin and 120, than more of value iodine — an or product, pure the for 10 than more of Colour Gardner — a — % solution by by weight in toluene (as determined the a Gardner Colour of more than 8 for a 50 hydroxide C,C acid, — Cyanic tetrahydro- 4,7-methano-1H-indene, hydrogenated % by weight but than 16 % or more not more content of 9 calcium — 1,3-Bis(4-cyanophenyl)propane (CAS RN 1156-51-0), RN (CAS — 1,3-Bis(4-cyanophenyl)propane % by weight butanone — in a solution of (CAS RN than 50 78-93-3) with a content of less Description Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium of solution aqueous an form in powder dithiocarbamate, by weight C-5 % than 75 more of Non-hydrogenated obtained by polymerization hydrocarbon resin, in ethyleneimine 2,4,4-trimethylpentene and and ethyleneimine 2,5-furandione Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4 of of and Copolymer salt 1,3-dimethylbenzene m- sodium with Polycarboxylate polymer Formaldehyde, containing: (EMA) Preparation, 3a,4,7,7a- anhydride and with maleic vinyltoluene polymer ether and of 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, vinyl ethylene Copolymer Dimethanonaphthalene, methyl of 1,4:5,8- and copolymer acid Alternated maleic of Mixed and calcium acid and sodium of a copolymer salt having methyl vinyl of maleic ether, a Copolymer 81 10 30 40 50 60 70 25 30 35 40 45 TARIC CN code ex 3911 90 19 ex 3911 90 19 ex 3911 90 19 ex 3911 90 19 ex 3911 90 19 ex 3911 90 19 ex 3911 90 99 ex 3911 90 99 ex 3911 90 99 ex 3911 10 00 *ex 3911 90 99 *ex 3911 90 99
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 128
review mandatory End date for End date
31.12.2017 31.12.2017 31.12.2018 31.12.2016 31.12.2016 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2016 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 ) of 100 000 to 300 000 0 % 0
w
)
1 method), and tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene tetrahydro-4,7-methano-1H-indene 503442-46-4) (CAS RN 503298-02-0) tetrahydro-1,4-methano-1H-fluorene sulphate, containing by % of ethylcellulose weight 27 (± 3) % or more of propionyl by (as determined the ASTM D 817-72 containing by — weight 25 method), 817-72 D ASTM the by determined (as poise 120 than more not of viscosity a — of for the manufacture of printing inks, paints, lacquers and other coatings, and reprographic coat ings ( weight (M average molecular Description Copolymer of methyl vinyl ether and maleic acid anhydride (CAS RN 9011-16-9) RN 3a,4,7,7a- (CAS with dodecyl anhydride 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene 4,4a,9,9a- atoms sodium acid of with carbon and maleic polymer 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene more hexadecan-1-ol and Hydrogenated of or containing ether polymer 3 dispersion vinyl 9012-09-3) Hydrogenated of methyl aqueous RN chain-lengths of (CAS an alkyl acid and methyl vinyl ether of a copolymer maleic salt Calcium zinc Copolymer triacetate of powder with powder: Cellulose diacetate form plasticized alkylated of Cellulose the not and 9004-65-3) form Ethylcellulose, in hydroxyethylated RN 68610-92-4) the Ethylcellulose, both (CAS RN in Cellulose, (INN) (CAS non-plasticised, Hypromellose 10 propionate, Polyquaternium acetate Cellulose 9067-32-7) RN phthalate (CAS methylcellulose hyaluronate Hydroxypropyl sodium Sterile modified by carboxylation and/or phthalic acid addition, having Protein, chemically a weight 53 57 65 86 30 40 10 20 30 40 50 10 20 85 92 TARIC CN code ex 3911 90 99 ex 3911 90 99 ex 3911 90 99 ex 3912 11 00 ex 3912 39 85 ex 3912 39 85 ex 3912 39 85 ex 3912 39 85 ex 3912 90 10 ex 3912 90 10 ex 3913 90 00 ex 3913 90 00 ex 3911 90 99 *ex 3912 11 00 *ex 3912 39 85
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 129
review mandatory End date for End date
31.12.2016 31.12.2018 31.12.2016 31.12.2019 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
m
μ
m or more but not than 110 μ
starch, exceeds the amount of the high that amylose biopolymer ethylene, of a length of not more than 600 mm, a diameter of not more than 85 mm and of not more a wall- than 600 ethylene, of a length not more mm, a diameter thickness of 30 — 35 % or more but less than 75 % of a high amylose extruded biopolymer produced corn from than 75 more but less % or — 35 % polyvinyl alcohol, more but less than 16 % or — 5 % of polyol plasticisers, but than 46 % or more less — 10 acid, % of stearic more but less than 3 % or — 0,25 %) of biodegradable resin but never to a polyester level — % (± 10 whether or not containing 30 of stearic %) % (± 0,25 %) by weight of a synthetic polymer and 0,5 % (± 5 10 from corn starch, acid following additives: containing the dioxide — titanium methacrylate) — poly(methyl carbonate — calcium agents — binding — polyamide-6 or poly(epoxy anhydride) present if % of polytetrafluorethylene more but not than 9 % or more — 7 % of inorganic fillers but than 25 % or more not more — 10 Description Granules containing by weight: by containing Granules 9082-07-9) RN (CAS salt sodium acid, Chondroitinsulphuric %) by weight of a high amylose extruded biopolymer produced % (± 5 Powder consisting of 90 weight: by containing pilings and facings, of sheet a kind manufacture of used in the of poly(vinyl chloride) Profiles structure, cellular with Rods Pipe consisting of a block copolymer and of polytetrafluoroethylene polyperfluoroalkoxytrifluoro 94 95 96 91 10 91 TARIC CN code ex 3913 90 00 ex 3913 90 00 ex 3916 20 00 ex 3916 90 10 ex 3917 32 00 ex 3913 90 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 130
review mandatory End date for End date
31.12.2019 31.12.2018 31.12.2018 31.12.2019 31.12.2016 31.12.2018 31.12.2020 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m, not for retail sale retail m, not for μ
m or more, μ
°C or more but not more than 200 °C, and a polyester liner, and of 90 more but not °C or debonds that temperatures adhesive at release thermal acrylic than 200 °C, and a polyester liner hoses consisting Reflecting film, of a layer of polyurethane, with, on one side, imprints against security for an intended mark or substitution of data duplication, an official alteration counterfeiting, on on or covered one side an adhesive layer, side, use, and embedded other beads and, glass on the film release a with both sides rubber synthetic or natural non-vulcanised with — coated — with a width of 20 mm or more but not than 40 mm urethane and acryl hydroxide, aluminium silicone, — containing 90 of temperatures at debonds that Polyester film: adhesive release thermal acrylic an with side one on — coated — on the other side not adhesive coated or pressure sensitive or with with an an acrylic m long thickness of 10 to and with a total 50 or substitution of data or alteration duplication, or against side, an counterfeiting, security imprints official mark for an intended use, only visible by means of a lighting, retroreflecting and embedded a with on both sides or on one side covered layer, an adhesive side, other beads and, on the glass release film 100 of thickness a — with %, 100 than more not of break at elongation — an adhesive silicon sensitive pressure a with side one on — coated Description tape: fuel into car insertion system for and a release clip a retainer connectors containing O-rings, Plastic adhesive two-sided of Rolls put epoxy modified foil, 10 up Double-sided, in rolls, resin to 20 self-adhesive cm wide, 10 to 210 of alkyd of poly(vinyl with, consisting a layer on polyester, chloride), of a layer film, one Reflecting film: Polytetrafluoroethylene 10 25 27 31 20 91 20 30 35 37 TARIC CN code ex 3919 10 19 ex 3919 10 80 ex 3919 10 80 ex 3919 90 00 ex 3919 10 19 ex 3919 90 00 ex 3919 10 80 ex 3919 10 80 ex 3917 40 00 *ex 3919 10 80
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 131
review mandatory End date for End date
31.12.2016 31.12.2020 31.12.2017 31.12.2017 31.12.2018 31.12.2017 Unit Supplementary - - - - -
- 0 duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous m or μ
) 1
m or more, μ
m or more and an type adhesive part of of a acrylic thickness of 5 μ polypropylene liner the other side with a pressure sensitive adhesive with channels and a release liner release adhesive with channels and a sensitive pressure with a side other the more, for use in the grinding and/or dicing process of silicon discs ( more, for use in the grinding and/or dicing process of silicon discs — coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester or polyester a and adhesive UV-sensitive or sensitive pressure acrylic an with side one on — coated Black poly(vinyl chloride) film: Black poly(vinyl chloride) D2457, ASTM to according degrees 30 than more of gloss a — with on and film, poly(ethyleneterephthalate) protective a with side one on covered not or — whether film: Ethylene vinyl acetate — of a thickness 100 Reinforced polyethylene foam tape, coated on both micro channelled pressure sides with an acrylic sensitive adhesive and on with an application thickness of 0,38 one side a liner, but mm or more not more than 1,53 mm Polyester, polyurethane or polycarbonate foil: adhesive, polymer silicone sensitive pressure — with — thickness of not more than 0,7 mm, of a total — width of 1 cm or more, but of a total not more than 1 m, rolls in not or — whether of products of headings of a kind of the surface 8521 the protection used for and 8528 Adhesive consisting of a base copolymer (EVA) of a of ethylene and film vinyl acetate 70 thickness of Polyethylene foil: — and smooth surfaces, non-rubber adhesive adhering solely to clean sensitive, with pressure — thickness of 0,025 of a total mm or more, but than 0,7 not more mm, and — width of 6 cm or more, but of a total not more than 1 m, rolls, in not or — whether of products of headings of a kind of the surface 8521 the protection used for and 8528 Description
40 43 45 47 50 41 53 34 93 43 26 45 32 25 50
TARIC CN code ex 3919 10 80 ex 3919 10 80 ex 3919 10 80 ex 3919 10 80 ex 3919 90 00 ex 3919 10 80 ex 3919 90 00 ex 3920 10 28 ex 3919 90 00 ex 3919 90 00 ex 3919 90 00 ex 3920 10 89 ex 3920 10 89 ex 3919 90 00 *ex 3919 10 80
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 132
review mandatory End date for End date
31.12.2017 31.12.2018 31.12.2018 31.12.2020 31.12.2016 Unit Supplementary - - - - -
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
or duplication, or an official mark for an intended use, mark for or duplication, an official Acrylic foam tape, covered on one adhesive pressure or an side with a heat activatable acrylic sensitive adhesive and on the other side with an pressure sensitive adhesive acrylic and a release by determined peel adhesion the ASTM an angle of 90 more than 25 sheet, of a ° of D (as at N/cm 3330 method) Reflecting sheet: — embossed polymer of a polycarbonate on film or acrylic one shaped side in a regular pattern — covered on and one or both or metallisation, of plastic sides with one layers or more — sheet whether or not and covered on layer a release one side with a self-adhesive followed by late), polymer a layer of acrylic containing of poly(methylmetha a film microprisms, crylate), an adhesive layer and a release sheet — or substitution of data alteration against counterfeiting, resin with imprints of an acrylic a layer beads, glass embedded having resin acrylic an of layer — a — hardened agent, by resin cross-linking a melamine of an acrylic a layer layer, metal — a and adhesive, acrylic — an film release — a Rolls of polyethylene foil: side, one on — self-adhesive — thickness of 0,025 of a total mm or more, but than 0,09 not more mm, 110 mm, — width of 60 more, but not more than 1 of a total mm or of products of headings of a kind of the surface 8521 the protection used for or 8528 Description of of poly(methylmethacry pattern, consisting of a film sheet showing laminated Reflecting a regular consisting film Reflecting 55 57 30 70 53 30 75 60 63 TARIC
CN code ex 3919 10 80 ex 3919 10 80 ex 3919 10 80 ex 3919 90 00 ex 3919 10 80 ex 3919 90 00 ex 3920 61 00 ex 3919 10 80 ex 3919 90 00 ______
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 133
review mandatory End date for End date
31.12.2018 31.12.2016 31.12.2016 31.12.2019 Unit Supplementary - - - -
duty 0 % 0 % 0 % 0 % Rate of autonomous
) 1
m or more, μ tution of data or duplications, or an official mark for an intended use, mark or duplications, an official tution of data — liner polyester adhesive and a UV-sensitive on with an acrylic coated one side Self-adhesive reflecting sheet whether or Self-adhesive reflecting not in segmented pieces, watermark, a containing not or — whether — on tape coated one with or without an application side with an adhesive; sheet consists of: the reflective — or vinyl polymer, of acrylic a layer — or polycarbonate containing microprisms, of poly(methyl methacrylate) a layer metallisation, of layer — a and layer, adhesive — an sheet release — a — whether or not containing an of polyester additional layer film, consisting of Self-adhesive reflecting several layers including: resin, acrylic of copolymer — a — polyurethane, substi or alteration counterfeiting, against imprints laser side, one on with, layer metallised — a and microspheres, — glass sides both or one on liner release a with layer, adhesive — an Acrylic tape put up in rolls: sides, both on — self-adhesive — thickness of 0,04 of a total mm or more, but not than 1,25 more mm, 205 mm — width of 5 mm or more but not than 1 of a total ( of products of headings for use in the manufacture 8521 and 8528 or polyethylene Poly(vinyl chloride) or any other polyolefine film: — of a thickness 65 Description
73 75 80 85 50 80 83 28
TARIC CN code ex 3919 10 80 ex 3919 10 80 ex 3919 10 80 ex 3919 90 00 ex 3919 90 00 ex 3919 90 00 ex 3919 90 00 *ex 3919 10 80
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 134
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2019 31.12.2017 31.12.2018 31.12.2019 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m, μ m, and μ
m or more, but not more than 70 μ
m or more but not more than 64 μ
other side with an layer of ionic antistatic organic choline compound, — a width of more than 1 295 mm but not more than 1 305 mm — 295 mm but not more than 1 a width of more than 1 — free from impurities or faults, or impurities from — free — and on the liner, adhesive and a protective sensitive pressure an acrylic coated on with one side — dust-proof layer of modified long whether or not with a printable chain alkyl organic compound, 54 of thickness without liner the a total — with terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an abrasion acrylic resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a protective liner poly(ethylene terephthalate) pattern, shaped regular a in side one on embossed layer acrylate epoxy an of — consisting — and covered on material, both of plastic sides with one or more layers sheet release a and layer adhesive an with side one on — covered resistant abrasion acrylic with an one side coated on and methylmethacrylate, butylacrylate other and on the black, oxide and carbon antimony tin of nanoparticles incorporating coating poly(ethylene terephthalate) adhesive and sensitive a silicone-coated pressure side with an acrylic protective liner of not more than 500 discharge V an electrostatic up in rolls of a width of 45,7 but cm or more not more than 132 liner) cm (supplied with a release 60 of thickness with a adhesive, sensitive pressure an acrylic 255 mm 245 mm but not more than 1 and more than 1 width of with a Description Transparent poly(ethylene terephthalate) self-adhesive film: self-adhesive terephthalate) poly(ethylene Transparent and mm put N/25 adhesive 0,147 sensitive) than with (pressure more and a copolymer of of poly(ethylene terephthalate) layers 1 to 3 laminated consisting of Film sheet: side rubber not laminated one and/or of Reflecting on acrylic strength coated an adhesive faults, with an or sides with and copolymer of construction of poly(ethylene terephthalate) multi-layer Film consisting of a impurities both film, from on terephthalate) free coated Poly(ethylene film, film self-adhesive Polyester poly(ethylene) Transparent 19 23 24 25 27 29 33 TARIC CN code ex 3919 90 00 ex 3919 90 00 ex 3919 90 00 ex 3919 90 00 ex 3919 90 00 ex 3919 90 00 ex 3919 90 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 135
review mandatory 31.12.2017 End date for End date
2 31.12.2018 31.12.2017 31.12.2018 Unit Supplementary - m - -
duty 0 % 0 % 0 % 0 % Rate of autonomous ) with pressure
2 (± 40 gm
2
m ) without adhesive layer, of 340 g/
2 μ
(± 30 g/m
2
m μ ) with heat sensitive adhesive layer or of 330 adhesive layer ) with heat sensitive g/m
2
(± 40 g/m
2 m fluoride, not more than 120 ppm hydrogen chloride, not more than 10 ppm hydrogen than cyanide, 120 not more than ppm hydrogen chloride, not more fluoride, more than 300 ppm carbon monoxide and not oxides, not more than 10 ppm nitrogen more not than 10 ppm dihydrogen sulphide and sulphur dioxide taken together FAR 25 Amdt.83) App.F Pt. I dioxide, cross-linkable vinyl acetate polymer emulsions, sensitive layer pattern, consisting coated on of poly(vinyl film one chloride) side with: beads, micro glass containing polyurethane of layer — a acetate), vinyl poly(ethylene of layer — a and layer, adhesive — an sheet release — a coated on with a both poly(vinyl sides chloride), of layer central with a sheet laminated Printed layer of poly(vinyl fluoride) — whether or not adhesive or heat sensitive layer with a pressure film release a with not or — whether — than 70 ppm hydrogen not more method ABD 0031) of by test determined (as toxicity a with method test by determined (as mm 130 than more not of seconds 60 within flammability a — with g/m 240 of film) release (without weight a — with titanium and emulsions polymer acrylic with mixed polyurethane of predominantly layer top — a — whether or not containing a second layer of a copolymer and mixture of vinyl acetate-ethylene additives, other of weight by % 6 than more — not and adhesive; sensitive pressure — a liner, release a with side one on — covered film, protective laminate over self-adhesive separate a with not or — whether — thickness of not more than 400 of a total than 100 of not more are embedded of a diameter glass balls Description Reflecting layered sheet on rolls, with a width of more than 20 cm, showing an embossed regular of: composed film Self-adhesive than sheeting, Poly(vinyl of a thickness less 1 mm, chloride) coated with an adhesive in which 36 95 35 38 39 TARIC CN code ex 3919 90 00 ex 3920 49 10 ex 3919 90 00 ex 3919 90 00 ex 3919 90 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 136
review mandatory 31.12.2017 End date for End date
2 31.12.2017 31.12.2017 Unit Supplementary - - m
duty 0 % 0 % 0 % Rate of autonomous
) without adhesive layer or of 580 g/
2
(± 45 g/m
2
m μ m or more, consisting of one or more layers of transparent more, layers consisting of one m or or more μ ) with pressure sensitive layer
2 (± 50 g/m
2 12898 of 80 % or more 12898 of 80 0,2 colour pigment, 10 ppm hydrogen than cyanide, not not more 85 ppm hydrogen than chloride, not more fluoride, more than 10 ppm nitrogen oxides, not more than 300 ppm carbon monoxide and not more than 10 ppm dihydrogen sulphide and sulphur dioxide taken together, FAR 25 Amdt.83), App.F and Pt. I m polyester film: polyester film: — according to EN normal reflectance total with a layer reflective one infrared containing at least than more not of 12898 EN to according emissivity normal a with layer a side one on — having — liner coated on sensitive adhesive and with a pressure the other side a release — polyurethane and layer containing of thermoplastic anti-blocking agent, a mixture a first — anhydride containing a second copolymer, a maleic layer and additives dioxide, titanium polyethylene, — containing a mixture of low density a third layer polyethylene, dioxide and titanium density additives, low of mixture a containing layer fourth — a and adhesive; sensitive pressure — a liner release a with side one on — covered film protective laminate over self-adhesive separate a with not or — whether — thickness of not more than 400 of a total sheet Printed laminated of poly(vinyl chloride), layer with a on coated each side fabric, of glass layer — a core with fluoride), poly(vinyl of layer a with covered side one — on side, other the on film release a and layer adhesive sensitive pressure a with not or — whether — than 50 ppm hydrogen not more method ABD 0031) of by test determined (as toxicity a with method test by determined (as mm 110 than more not of seconds 60 within flammability a — with g/m 490 of film) release (without weight a — with Description Film, with a total thickness of 40 of thickness total a with Film, of: composed film Self-adhesive 44 95 40 42 TARIC CN code ex 3919 90 00 ex 3919 90 00 ex 3921 90 60 ex 3919 90 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 137
review mandatory End date for End date
31.12.2017 31.12.2018 31.12.2018 31.12.2020 31.12.2019 31.12.2020 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m, and μ m or more but not m or μ m or more but m or more not more than μ
m μ
m or more but not more than 40 μ
m, covered on one side with an adhesive layer and a release sheet release and a layer an adhesive m, covered on one with side μ m, μ 17 irradiation, — with a thickness below layer 1 a non-silicone release — a polyolefin layer with a thickness of 28 of thickness a with layer polyolefin — a Polariser film, in Polariser rolls, consisting of a multilayered polyvinyl alcohol film, supported on either side on one film adhesive side and sensitive release with a pressure film, cellulose by a triacetyl in a regular shaped of a polymer pattern, a film containing glass microspheres, an adhesive layer sheet release and a exceeding 90 8 of thickness a with rubber synthetic on based layer adhesive — an — adhesive with an adhesive of 70 an acrylic strength N/m or more whether not reduced upon embossed — side of 78 or more, and microns liner thickness without release a total one on and spheres oblate with equipped not or whether liner, release — a layer, chloride) poly(vinyl — a — a polyurethane layer, layer, microspheres glass — a Description of: embossed on of poly(methyl methacrylate) one sheet consisting side of a film laminated Reflecting consisting tape of a thickness of of poly(methyl 50 film methacrylate), Biaxially-oriented polyolefin White whether or not covered on of polymer, with film, one Poly(vinyl side with a layer chloride) containing: film Reflecting 47 40 49 51 52 54 60 TARIC
CN code ex 3919 90 00 ex 3919 90 00 ex 3919 90 00 ex 3919 90 00 ex 9001 20 00 *ex 3919 90 00 *ex 3919 90 00 ______
M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 138
review mandatory 31.12.2018 End date for End date
2 31.12.2020 31.12.2020 31.12.2020 31.12.2018 Unit Supplementary - - m - -
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 m, consisting of one μ
m μ
m or more, but not more than 400 more, m or μ
than 40 microns with angle of view, with angle of or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side or dyed poly(ethylene terephthalate), metallised of transparent, layers or more coating and adhesive on and sensitive a release resistant the other side with a pressure with a scratch liner — each layer containing a mixture of polypropylene and polyethylene, and polypropylene of mixture a containing layer — each % by polymers, weight of other — containing not more than 3 layer, core the in dioxide titanium containing not or — whether and adhesive, sensitive pressure acrylic an with — coated liner release a — with — than 110 thickness of not more of an overall — with a thickness of more than 95 but layer not a poly(olefin) more than 110 microns — with a thickness of more than 5 but an adhesive not more than 15 layer microns — a layer based on epoxy resin, with a thickness of more than 4 but not more than 100 microns — with a thickness of more than 35 consisting but of poly(ethylene terephthalate) not a liner more layer, polyester embossed — an layer, copolymer isocyanate caprolactone-cyclohexylene — a adhesive sensitive pressure — a liner release a with side on one and covered — which mark changes appearance whether or not and/or official incorporating a security a layer and layer, aluminium metallised — a — liner an adhesive, covered on one side with a release Description Co-extruded trilayer film, trilayer 40 Co-extruded of thickness a with of: film consisting Self-adhesive film plastic Self-adhesive polishing discs of microporous polyurethane, Self-adhesive whether or not coated with a pad Film of a minimum thickness 0,36 mm, consisting of the following: 63 65 67 70 81 TARIC CN code ex 3919 90 00 ex 3919 90 00 *ex 3919 90 00 *ex 3919 90 00 *ex 3919 90 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 139
review mandatory End date for End date
31.12.2016 31.12.2016 31.12.2018 31.12.2018 31.12.2019 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m μ m, μ
0 % 0 m or more but not more than 300 more but not m or μ m or more but not more than 70
μ or more
3
) 1
liner is 525 mm or more — 100 with a thickness of a polyurethane based layer — having a minimum reflectance of 93,5 % as determined by % as determined ASTM G173-03, — 93,5 of having a minimum reflectance polyethylene, polyester of layer siliconised removable a a with and side adhesive one on sensitive — covered pressure acrylic an with side other the on — covered by determined ASTM % (as D1003), including: layers consisting of several 3 20 of thickness a with layer adhesive acrylic — an Film of a thickness not more than 0,20 mm, of a blend of polyethylene and a copolymer of coating both of a layer sides rhomboidal pattern, for ethylene with oct-1-ene, embossed in a regular ( of unvulcanized rubber — of polymers ethylene g/cm 0,94 of gravity a — having ink plus colours, specialist to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics: — and equally spaced along the length of film is repetitive — is equally and visibly aligned when of the film the back viewed or front from — with permanent graphics consisting of two different alternating designs whose individual length individual — whose of a thickness 0,019 mm ± 0,003 designs mm alternating different two of consisting graphics permanent — with Description Self-adhesive transparent film, having a transmittance of more than 90 % and a haze of less than less of haze a and % 90 than more of transmittance a and copper: of silver layers and metallised of poly(methyl methacrylate) film Multi-layered having in film, colours transparent base Self-adhesive four using by achieved is which film design, embossed Film of polyethylene, of a kind ribbon used typewriter for graphic Printed a with printed film Poly(ethylene) 10 20 85 87 20 30 91 TARIC CN code ex 3920 10 25 ex 3919 90 00 ex 3920 10 89 ex 3920 10 25 ex 3920 10 28 ex 3920 10 28 ex 3919 90 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 140
review mandatory End date for End date
31.12.2017 31.12.2020 31.12.2016 31.12.2016 31.12.2018 31.12.2016 31.12.2016 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
m m μ μ
m, μ
m or more, μ m or more but not than 13,5 more μ side with a layer predominantly of cyclic olefin polymers, predominantly of cyclic side with a layer with a layer of polyamide, covered on side with least one either at layer of polyethylene, — having a diameter of 500 mm or more but not more than 600 mm than more not but more — or 500 mm of diameter a having — of a width of not more than 210 mm, D882, ASTM to — conforming ( vehicle batteries lithium-ion electric for of separators for use in the manufacture — a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either polymers of ethylene, consisting of: on covered alcohol vinyl ethylene of predominantly layer core a with barrier tri-layer — a material, polymeric of layers more or two with side either on — covered 110 than not more of thickness total overall and having an — with a core layer of ethylene vinyl barrier alcohol covered on side consisting of either a tri-layer 55 of thickness total a — having and undulations, embossed with surface relief raised — a mm 0,125 than more of thickness — a thickness of 0,8 mm or more but not than 1,2 of a total mm total thickness of 11,5 mm, 0,1 than more not of thickness the — with — printed on both sides with specialised coatings to allow banknote security printing Sheet of polypropylene of a roll: in the form 30 than more not of thickness a — with Description Tubular layered film predominately of polyethylene: of functionalized predominately of copolymers ethylene or Co-extruded film seven to nine layered predominately film with: layered film Tubular (EVA) acetate vinyl Ethylene film: polypropylene oriented — a high-density polyethylene layer, to coating and laminated containing Composite an acrylic sheet biaxially of and a polyethylene on one side of coextruded layer with a polypropylene oriented film Biaxially Sheets 50 95 30 40 30 40 30 40 TARIC CN code ex 3920 20 29 ex 3920 10 89 ex 3920 10 89 ex 3920 20 21 ex 3920 20 21 ex 8507 90 30 ex 3920 10 40 *ex 3920 10 40
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 141
review mandatory End date for End date
31.12.2017 31.12.2018 31.12.2019 31.12.2016 Unit Supplementary - - - -
duty 0 % 0 % 0 % 0 % Rate of autonomous
m, or four consisting of three μ
m μ m,
μ
m μ m or more but m or more not more than 97 μ and side with a layer predominantly of cyclic olefin polymers, predominantly of cyclic side with a layer — modulus of 0,30 in the machine direction a tensile GPa or more but not than 1,45 GPa, of 0,20 but not more than 0,70 direction GPa or more modulus GPa transverse a tensile in the layers, each layer containing a mixture of polypropylene containing a each layer layer and polyethylene, layers, with a core dioxide, whether or not containing having: titanium — of 120 strength in the machine direction MPa but a tensile or more not more than 270 MPa and — a tensile strength in the transverse direction of 10 MPa or more but not more than 40 MPa 527-3 D882/ISO ASTM method test by determined — as Co-extruded seven to nine layered film predominately of copolymers propylene, either Co-extruded consisting of: film seven to nine layered on covered alcohol vinyl ethylene of predominantly layer core a with barrier tri-layer — a material, polymeric of layers more or two with side either on — covered 110 than not more of thickness total overall and having an not whether or layer core with a propylene ethylene and vinyl and a copolymer of acetate, dioxide, having: containing titanium 55 of thickness — a polyethylene, and polypropylene of mixture a containing layer — each % by polymers, weight of other — containing not more than 3 layer, core the in dioxide titanium containing not or — whether — than 70 thickness of not more of an overall Description thickness of not more than 75 of a total Mono-axial oriented film, consisting consisting Mono-axial each layer of a mixture poly of three layers, oriented film, film, trilayer Co-extruded 55 93 60 70 94 TARIC
CN code ex 3920 20 29 ex 3920 20 29 ex 3920 20 80 *ex 3920 20 29 *ex 3920 20 29 ______
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 142
review mandatory 31.12.2017 End date for End date
3 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary - m - - -
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
(as determined by ASTM
3
m or more but not more than μ m, containing 30 or more but not m, containing 30 more or μ
or more but not more than 1,035 but not more g/cm or more
3 m or more but not more than 80 μ
)
1 m composed of a blend of a copolymer of propylene with ethylene and a copolymer of μ 94 VTM-0 for material thicknesses of 0,05 but not more than 0,25 mm or more 94 mm (as material VTM-0 for determined by Flammability Standard UL-94) D149) determined by ASTM D882) determined by ASTM D882) D792) D570) more than 40 parts of plasticiser to 100 of poly(vinyl chloride) parts more than 40 of plasticiser parts 223 of a layer on with a covered one side coated or (SEBS) styrene-ethylene-butylene-styrene of polyester (SEBS) and a layer copolymer of styrene-ethylene-butylene-styrene — thicknesses of 0,25 and UL mm or more level of UL 94 material level V-0 for retardant flame by ASTM determined 60,0 kV(as than more not — but more or 13,1 kV breakdown of dielectric 30 but not more than 33 MPa (as of MPa or more machine direction in a yield tensile — — tensile yield in a transverse direction of 22 MPa or more but not more than 25 MPa (as g/cm 0,988 of range — density scopic, of a thickness 60 gloss Film of a specular of 70 or more, measured at an angle of 60 ° using (as a glossmeter by determined the ISO 2813:2000 method), consisting of one of poly(vinyl or two chloride) layers coated on both of a thickness 0,26 of plastic, sides with a layer mm or more but not more than polyethylene, of a width of of in rolls film 1,0 mm, with a protective covered on the gloss surface of goods 450 use in the manufacture of heading mm, for 000 than 1 mm or more but not 1 9403 ( pattern, covered on totally embossed sheet pyramidal in a regular one side with a release — moisture absorption of 0,01 % or more but not more than 0,06 % (as determined by ASTM % or more but not more than 0,06 — moisture absorption of 0,01 ( industries and electrical of insulators used in the electronics use in the manufacture for Description Polypropylene sheet, put up in rolls, with: rolls, in up micro 181 thickness of of a film consisting of a strip, or sheet Laminated put even sheet, holes, Polypropylene any without rays, ultraviolet against stabilized chloride), poly(vinyl of Sheeting of an other plastic and a film of poly(vinyl chloride) film sheet, consisting of a laminated Reflecting 94 93 92 95 92 95 TARIC CN code ex 3920 43 10 ex 3920 20 80 ex 3920 43 10 ex 3920 49 10 ex 3920 43 10 ex 3920 20 80
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 143
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2016 31.12.2016 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 m, consisting μ m or more but not more m or m or more but not m or μ μ
m, consisting especially of a layer containing carbon of a layer m, consisting black especially
μ m μ tution of data or duplications, or an official mark for an intended use mark or duplications, an official tution of data m, either: more than 350 of one or two layers each containing throughout a colouring and/or UV-absorbing the material material any or other mass, uncoated with an adhesive — containing by weight 45 % or more of fillers % or more of — containing by weight 45 support a — on more but not than 19 mm exceeding 90 thickness of 1,0 mm or more but not than 1,3 mm, put up in rolls resin acrylic of copolymer — a — polyurethane substi or alteration counterfeiting, against imprints laser side, one on with, layer metallised — a and microspheres, — glass poly(ethyleneterephthalate) of liner permanent — a μ or mass, the in dyed — only side one on metallised and mass the in — dyed Description Film of a (polyvinyl)chloride-copolymer (polyvinyl)chloride-copolymer a (MIL-PRF-25690) of 4366 Film EN 25 standard than including: to more layers conforming containing aluminium trihydroxide, of a thickness 3,5 of poly(methyl mm or methacrylate) Plate not several polymethylmethacrylate of of of of a thickness of of poly(methyl 50 film methacrylate), Biaxially-oriented thickness consisting Sheets a film, of reflecting with a acrylate and Non-cellular non-laminated sheet of modified copolymer of acrylonitrile-methyl adhesive, Non-self-adhesive an with coated not film, terephthalate) Coextruded opaque of a thickness of 50 sheet of poly(ethylene terephthalate), Poly(ethylene only, thickness of not than more of a total 120 Film of poly(ethylene terephthalate) 30 20 30 40 10 30 02 08 12 TARIC CN code ex 3920 51 00 ex 3920 51 00 ex 3920 51 00 ex 3920 59 90 ex 3920 59 90 ex 3920 62 19 ex 3920 62 19 ex 3920 62 19 ex 3920 49 10
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 144
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2018 31.12.2017 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m, μ
m μ m, m, coated on one side with a on m, coated one side μ μ
0 % 0
m, m) μ μ m or more but not than 350 m and having a surface resistivity of not more than 10 000 ohms m and of not having resistivity more than 10 a surface μ μ m (± 3 m (± μ
)
1 silica or aluminium oxide has been silica dispersed and of a thickness not more than 2 nm or more but not than 80 nm, consisting of one layer which is metallised only and one or two layers each containing a colouring containing a each only two layers and one or metallised which is one layer consisting of throughout the mass, uncoated and/or UV-absorbing with an material adhesive or any other material similar bags or school satchels, of or thereof, and accessories clothing and badges, safety containers ( of aluminium oxide of a thickness not more than 35 nm layer resin, acrylic epoxy of layer a with sides both on — coated — thickness of 37 of a total % of aluminium, of a side with metal and/or metal oxides, containing by weight less than 0,1 than 300 thickness of not more determined by (per square) (as the ASTM D 257-99 method) — of a thickness not than 20 more — in which layer consisting of a polymeric matrix coated on one side with at least a gas barrier Iridescent film of polyester and poly(methyl methacrylate) — coated on of organic substances of a thickness 7 both on with layers the basis of acryl sides — tension of 36 but not than 39 Dyne/cm with a surface or more more Dyne/cm, %, 93 than more of transmission light a — with %, 1,3 than more not of value haze a — with 10 of thickness total a — with 600 mm — with a width of 800 mm or more but not than 1 Description Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers safety of manufacture the for pattern, pyramidal a in embossed sheeting only, of poly(ethylene of a total thickness not terephthalate) more than 120 Laminated film polyester Reflecting than 12 of a thickness not more film, Poly(ethylene terephthalate) of poly(ethylene terephthalate): Sheets or rolls film: terephtalate) coated on polyester, one similar or poly(ethylene naphthalate) poly(ethylene terephthalate), Film of (ethylene Poly film: terephthalate) poly(ethylene Transparent 73 40 18 20 38 48 52 60 76 TARIC CN code ex 3920 62 19 ex 3920 62 19 ex 3920 62 19 ex 3920 62 19 ex 3920 62 19 ex 3920 69 00 ex 3920 62 19 ex 3920 62 19 *ex 3920 62 19
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 145
review mandatory End date for End date
31.12.2019 31.12.2018 31.12.2019 31.12.2019 31.12.2019 31.12.2019 31.12.2018 31.12.2019 Unit Supplementary - - - p/st - - -
- duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
m m, μ μ 3%
0 % 0 m or more but not than 120 m or more but not than 50 μ μ
weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc, based polymer, poly-glycol ester acid) poly(lactic weight of modified acid), weight of additives modified poly(lactic hexanoate) as a plasticiser, except poly(vinyl butyral), or any other material into account than 0,2 and a thickness of poly(vinyl of more mm butyral) — biodegradable and compostable (as determined by the method EN 13432) EN method the by determined (as compostable and — biodegradable 13432) EN method the by determined (as compostable and — biodegradable — composed of more than 85 % by weight of poly(lactic acid) and not more than 10,50 % by % by acid) and weight of poly(lactic not more than 10,50 — composed of more than 85 20 of thickness a — having % by % by acid) and weight of poly(lactic not more than 15,75 — composed of more than 80 45 of thickness a — having plasticiser a phosphate as bis(2-ethyl of triethyleneglycol % than 30 more but not % or — containing by 26 weight — with a thickness of 0,73 but not than 1,50 mm or more more mm film of on films, metallised poly(ethylene terephthalate) the external sides only, and having the following characteristics: % or more, — of 50 light transmission a visible — coated on one or both sides with a layer of poly(vinyl but butyral) not coated with an adhesive — a total thickness of not more than 0,2 mm without of poly(vinyl taking the presence butyral) Description Film of poly(ethylene naphthalene-2,6-dicarboxylate) poly(ethylene film: of oriented Film biaxially film: Monolayer, shrink oriented, transverse Monolayer, band coloured film: with a thickness of not more than 1,5 mm Sheets of painted vulcanised fibre-board graduated butyral) a tri-isobutyl % of than 28 but not more or more % containing by weight 25 film Poly(vinyl butyral) Poly(vinyl having film butyral) Poly(vinyl on one or both whether or not metallised sides, or laminated poly(ethylene terephthalate), Film of 20 50 60 10 51 52 91 93 TARIC CN code ex 3920 69 00 ex 3920 69 00 ex 3920 79 10 ex 3920 91 00 ex 3920 91 00 ex 3920 91 00 ex 3920 91 00 ex 3920 69 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 146
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary - - - -
duty 0 % 0 % 0 % 0 % Rate of autonomous
m) μ
m μ m, μ
-ethylenedioxydiethyl bis(2-ethylhexanoate) as a as -ethylenedioxydiethyl bis(2-ethylhexanoate) ′ m, μ
m or more, but not more than 14 m or more, μ m), μ
m), μ m), 50 μ of 50 which silica has been dispersed and of a thickness not which than 2 silica more — by thickness of 25 determined of VTM-0 UL 94 (as for a film a flammability — a glass transition point (Tg) of 226 °C, — a continuous of 180 temperature °C service by (as determined UL-746 B thickness for a of film — 50 by thickness of determined JIS C-2318 (as film % or more for a an elongation at break of 50 — than 532 478 more, but not more width of a mm, mm or — at break a tensile strength of 78 MPa or more (as determined by JIS C-2318 thickness for a film 29 % or more but not more than 31 % of 2,2 % of 31 than but not more more % or 29 — of a thickness not than 20 more — in which matrix consists of a polymeric layer one coated on side with a gas barrier least at 5 of thickness — a glycol), ether (tetramethylene — poly methane, (4-isocyanotocyclohexyl) — bis 1,3-butanediol, or — 1,4-butanediol — with a thickness of 0,25 but not than 5,0 mm or more more mm, surface, one on pattern regular a with — embossed sheet release a with covered — and plasticiser Description Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight by containing band colour graduated a with film butyral) poly(vinyl trilayer Co-extruded with film: rolls, Polyamide in sheets, imide Polyether monomers: following the containing film Polymer 95 30 35 40 TARIC CN code ex 3920 92 00 ex 3920 99 28 ex 3920 99 28 ex 3920 91 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 147
review mandatory 31.12.2019 End date for End date
2 31.12.2018 31.12.2016 31.12.2017 31.12.2016 Unit Supplementary - - - - m
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous m, μ
m μ
)
1
m or more but not more than 350 μ
m but not more than 244 m but not more μ
polypropylene copolymer determined by test method ASTM E 313-10), ASTM D 1003-11), D2457), ISO 4287), — with a gloss of more than 90 degrees according to ASTM D2457 ASTM to according degrees 90 than more of gloss a — with — polyethylene/ consisting of bonding heat with a adhesive layer side metalized on covered the film terephthalate) poly(ethylene protective a with side other the on — covered 204 than more of thickness total a — with film removable protective covered on one side with a self-adhesive, — not — an index of yellow lower more than 1,0 but not more than 2,5 for 10 (as mm stacked films % for 10 mm stacked (as determined by films test method — a light higher transmission to 87 — thickness of 0,38 a total mm or more, but not than 7,6 more mm, — a width of 99 cm or more, but than not more 305 cm, glass safety laminated of production the in used kind a — of — thickness of 2 mm or more, but not than 9 more mm, of a total — width of 12 more, but not more than 65 of a total mm or mm, ( of products of headings for use in the manufacture 8521 or 8528 mm), 10 (± mm 640 1 of width — a ASTM method the by determined (as 3,8 than more not but more or degrees 3,3 of gloss — a — roughness by the method of 1,9 determined than 2,8 more but not a surface more Ra or Ra (as Description Transparent polyurethane film metallised on one side: one on metallised film polyurethane Transparent with: extruded, film of a thickness 250 polyurethane film, Thermoplastic polyurethane Thermoplastic strip: or with: plate rolls tape, in Silicone foil polyurethane thermoplastic Matt, 45 50 55 60 65 TARIC CN code ex 3920 99 28 ex 3920 99 28 ex 3920 99 28 ex 3920 99 28 ex 3920 99 28
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 148
review mandatory 31.12.2019 End date for End date
2 31.12.2016 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary - m - - - -
duty 0 % 0 % 0 % 0 % Rate of autonomous
m or more but not more m or μ
m, μ 0 % 0
(± 3) (as determined by the method EN ISO 527) m but not more than 760 0 % 0
μ 2
m, a tensile strength at break of 20 but strength not MPa or more more than 55 m, a tensile MPa and an μ — a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)), (ASTM A Shore method: the by determined (as 4) (± 90 of hardness — a by determined the method: EN ISO 527) % (as — an elongation to break of 470 — whether or not alloyed with gold, with a coating of metal, microspheres layer, adhesive — an — on one side, or poly(ethylene terephthalate) of silicone layer with a protective and side, other the on terephthalate) poly(ethylene of layer protective a — with — but with a width of 5 cm or more not more than 100 cm m 000 2 than more not of length a — with — 016 mm, a width of more than 900 mm but not more than 1 finish, matt — a mm), 0,03 (± mm 0,43 of thickness — a %, but not than 520 % or more more — an elongation to break of 420 N/mm 55 of strength tensile — a vapour to water more but not than 0,14 mm, impermeable more than 90 % more but not than 900 % or more elongation at break of 250 — a hardness of 90 (± 4) (as determined by the method: Shore A [ASTM D2240]), [ASTM A Shore method: the by determined (as 4) (± 90 of hardness — a mm, 6,35 of (waves) inside — wrinkle mm 0,025 of flatness — a — a thickness of more than 365 than more of thickness — a Description Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: properties, conducting with resin, epoxy of consisting rolls, on Sheets with: rolls in foil polyurethane Thermoplastic material plastic film fluorinated Poly(1-chlorotrifluoroethylene) of membranes film, non-microporous, in the Polytetrafluoroethylene form of rolls, a thickness of 0,019 mm or Ion-exchange 34 a thickness of vinyl of of a alcohol copolymer, soluble in cold water, Film 70 75 25 50 55 65 TARIC
CN code ex 3920 99 28 ex 3920 99 59 ex 3920 99 59 ex 3920 99 59 ex 3920 99 28 *ex 3920 99 59 ______
M5 M4 ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 149
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2017 31.12.2018 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous m or more but not m or 0 % 0 μ m μ m or more but not more than but not more m or more μ 0 % 0
m μ
m, μ
)
1
m or more but m or more not more than 36 μ
m and cellulose of a a thickness layer of regenerated of 10 μ
m μ of a kind used for the manufacture of alkaline battery separators battery of a kind of alkaline the manufacture used for 40 than 140 a maximum length of 300 m, used for joining electronic components 300 a maximum length of production m, in the LCD used for joining electronic of or plasma displays or more but not than 0,10092 mm), 0,25 (± mm 2,29 of thickness a — with and promoter, adhesion foraminous a with — surface-treated — material and of textile a layer film to a polyester laminated — polyamide-6 or poly(epoxy anhydride) present if % of polytetrafluorethylene more but not than 9 % or more — 7 % of inorganic fillers but than 25 % or more not more — 10 — a width of 98 mm or more but not than 170 mm, 15 of thickness — a ( for kidney facture of filters dialysis equipment Description Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with: foam: rolls, polyurethane weight: width of a of 1,5 mm or more but not in rolls, more than Anisotropic conductive 3,15 film, mm and of open-cell by form of containing gravity of 0,09435 %) and of a specific Sheet of polyurethane foam, of a thickness of 3 mm (± 15 the Rolls structure, in cellular film, with polyethylene Blocks grafted acid acrylic microporous, Transparent, Microporous of a thickness not more than 100 polypropylene film on Strip of microporous polytetrafluoroethylene a support of a non-woven, use for in the manu of a thickness not more than 200 Film of polyethersulfone, of polyethylene consisting of a layer of a thickness 90 film, Cellular 20 10 20 30 40 91 93 95 96 TARIC CN code ex 3921 19 00 ex 3921 19 00 ex 3921 13 10 ex 3921 13 10 ex 3921 19 00 ex 3921 19 00 ex 3921 19 00 ex 3921 19 00 ex 3920 99 90
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 150
review mandatory 31.12.2018 31.12.2020 End date for End date
2 2 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2020 Unit Supplementary - - m - - - m
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous m, μ m but not μ m but not more than μ m but not more than 150 m but not more μ m but not more than 15 m but not more μ
)
1
) 1 0 % 0 m,
2 μ
m μ
m, μ m,
more than 40 30 μ — than 35 with a thickness of more liner poly(ethylene terephthalate) and a transparent — with a thickness of more than 8 of phenolic material a primer — an adhesive layer of a synthetic rubber with thickness more than 20 glass fibres rectional nonwoven poly(ethylene and terephthalate) impregnated with polyurethane or epoxide resin 100 than more of thickness a with film terephthalate) poly(ethylene — a resin mixed with epoxide resin, measuring: — 469,9 × 622,3 or mm (± 2 mm) 2 mm), mm (± — 469,9 × 414,2 or mm (± 2 mm) 2 mm), mm (± — 546,1 × 622,3 mm (± 2 mm) 2 mm mm (± ( boards of printed circuit for use in the manufacture containing polyimide Prepreg sheets or rolls resin or Nylon/Polyester blended % Nylon Taffeta, Taffeta — of 100 comprising a core layer polyamide, with sides both on — coated 135 than more not thickness total a — of g/m 80 than more not weight total a — of ( use semiconductor systems in encapsulating for inorganic fillers Description Pre-impregnated reinforced fibreglass containing cyanate ester resin or bismaleimide (B) triazine (T) triazine (B) of: bismaleimide with reinforced of poly(butylene or terephthalate), Composite of poly(ethylene terephthalate) plate consisting or unidi of layer a with sides on both or on one side laminated film, terephthalate) Poly(ethylene film resin Multilayer ester cyanate containing fibreglass reinforced Pre-impregnated and rolls, additives in hardener, sheet, with fabric resin epoxid layered halogen-free Three reactive, of sheets fibre-reinforced Glass 25 21 29 10 20 30 20 40 50 TARIC CN code ex 3921 90 55 ex 7019 40 00 ex 3921 90 55 ex 3921 90 10 ex 3921 90 10 ex 3921 90 55 ex 7019 40 00 ex 3921 90 10 *ex 3921 90 55
M5 M4 ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 151
review mandatory 31.12.2019 End date for End date
2 31.12.2018 31.12.2018 31.12.2016 Unit Supplementary m - - -
duty 0 % 0 % 0 % 0 % Rate of autonomous
) 1
)
1
m, and μ ethyl hexanoate) as plasticiser, ethyl hexanoate) — 0,05 with a thickness of 0,01 layer mm(± mm), with a metal laminated di (2- % of triethyleneglycol % or more but not than 40,25 — containing by weight 29,75 by determined the ISO 9050 % or more (as standard); — of 70 transmission with a light by (as determined the ISO 9050 % or less standard); — of 1 with an UV transmission mm) 0,043 (± mm 0,43 of thickness total a — with coated Woven or covered fabric, with a copolymer polytetrafluoroethylene of tetrafluoroethylene or acid ending in carboxylic alkoxy side-chains having perfluorinated and trifluoroethylene sulphonic groups, acid form whether or not in the potassium or sodium salt determined by glossmeter (as the ISO 2813:2000 method), consisting of of a poly(ethylene layer adhesive coloured coating, joined of poly(vinyl by and chloride), a layer a metallised terephthalate) ( for coating panels and doors of a kind used of domestic appliances manufacture in the comprising: laminate Roll of polymer-metal terephthalate), poly(ethylene of layer — a aluminium, of layer — a polypropylene, of layer — a mm, 275 than more not of width a — with 165 than more not of thickness total — a — to ASTM D1701-91 conforming and ASTM D882-95A ( vehicle batteries of lithium-ion electric for use in the manufacture Description Heat-, infra- and UV insulating poly(vinyl butyral) film: butyral) poly(vinyl insulating UV and infra- Heat-, Film, of a specular gloss of 30 or more but not more than 60 measured at an angle of 60 ° using a 91 20 10 10 50 30 93 TARIC CN code ex 3921 90 60 ex 5407 71 00 ex 3921 90 90 ex 5903 90 99 ex 3921 90 60 ex 8507 90 80 ex 3921 90 60
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 152
review mandatory End date for End date
31.12.2018 31.12.2020 31.12.2019 31.12.2016 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary - p/st p/st - - - p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
m or more but not more than but not more more m or μ
)
1
m discharge (ESD) and discharge (ESD) outgassing properties, surface or cosmetic damage and μ — consisting of antistatic materials or blended thermoplastics proving or blended electrostatic thermoplastics special materials consisting of antistatic — properties, surface resistant impact or resistant abrasion porous, non — having from wafers photomask or the protects that system designed retainer specially a with — fitted seal, gasket a without or — with kind photolithography of a used in the semiconductor production house other to or photomasks or wafers ends, both at bosses aluminium — with resin, epoxide with impregnated fibres carbon of overwrap an in embedded — wholly — of 213 mm or more, but not than 368 of a diameter more mm, 260 mm, and — a length of 860 mm or more, but not more than 1 — or more, but not than 50 more of 18 litres litres a capacity Plastic cover of the for rear-view mirror motor exterior vehicles with clips of to a backing-strip lines or in a grid-pattern in parallel heat-sealed pattern, pyramidal regular material covered on or of knitted woven one side with plastic fabric material, plastic 80 ( suspension systems acrylonitrile- of parts other and covers frames, wheels, setting drums, Housings, housing parts, controls butadiene-styrene of a kind of remote used for the manufacture Description Photomask or wafer compacts: wafer or Photomask hydrogen: compressed for vehicle motor container, of Polyethylene manufacture the in use for spring leaf traverse embossed of poly(vinyl in a chloride) sheeting or tape, consisting of a facing-strip Reflecting plastic reinforced fibre of 4,5 divinylbenzene, a polymer of diameter Microspheres of of a Glass 10 20 10 15 10 10 20 10 15 TARIC CN code ex 3923 30 90 ex 8708 29 90 ex 3926 90 92 ex 3926 90 97 ex 3926 90 97 ex 8543 90 00 ex 3923 10 00 *ex 3926 30 00 *ex 3926 90 97
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 153
review mandatory 31.12.2018 End date for End date
31.12.2019 31.12.2018 31.12.2018
2 31.12.2018 31.12.2016 31.12.2018 31.12.2020 Unit Supplementary - - p/st p/st m p/st - -
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
2 m or more m or μ
m μ 0 % 0
m μ or more but not more than 42 but not more than g/m or more
2
m or more but not more than 49,6 but not more more m or 0 % 0 μ m or more but not than 4,6 m and m of a weight 21 g/m μ μ
but not more than 1 200 1 but not more than crylate, of a diameter of 3 diameter of a crylate, — with or without polycarbonate, of acrylonitrile-butadiene-styrene — coated with a copper, and a nickel a chrome layers, — thickness of coating 5,54 with a total coated on pad outside with scratch the switches steering buttons for interface Polycarbonate control resistant paint and paint, acrylic silver-colour — a paint scratch-resistant transparent — a of a kind front panels of car radio used in the manufacture strings, — textile mm, 3,2 of thickness wall — a and ends, both on pressed terminal hollow metal — a brackets, mounting more or — one of kind goods of used in the manufacture of Chapter 87 Description Parts of car radio and car air-conditioner front panels front air-conditioner car and radio car and isobornyl Unexpansible metha methacrylonitrile of a copolymer microspheres of acrylonitrile, of Parts with coated resin, polycarbonate of made panel, Knob made of Bisphenol radio front A-based polycarbonate of car element cord Flat product of polyethylene, in opposing perforated directions, of a thickness of 600 decoration and Die-cast thread rubber with vulcanised hose Siliconated brake Rubber 37 40 25 30 50 55 65 10 20 TARIC CN code ex 3926 90 97 ex 8538 90 99 ex 3926 90 97 ex 3926 90 97 ex 3926 90 97 ex 4007 00 ex 3926 90 97 *ex 3926 90 97 *ex 4009 42 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 154
review mandatory End date for End date
31.12.2020 31.12.2018 31.12.2016 31.12.2017 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
2 , for use in the , for
2 0 % 0 )
1 0 % 0
)
1
or more but not more than 2 850 cm than 2 or more but not
2
of the material in the place of mold split of not more than 0,25 mm, in the shape of a rectangle: than 0,25 of not more mm, in the shape of a rectangle: mold split of in the place material of the — with a length of 72 mm or more but not than 825 mm; — with a width of 18 mm or more but not than 155 mm ( covers of motor vehicles seat for material of raw manufacture 200 mm, 270 mm or more, but than 3 not more — of a length of 1 000 mm, — of a width of 150 mm or more, but not more than 2 and containing a hump hole of 450 cm of hump hole a and containing Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether prepared, not further but retanned or on, tanned wool without leather, skin lamb Sheep or of heading 4114 or not split, other than leather or whether prepared, but not further retanned on, tanned or without hair kid skin leather, Goat or heading 4114 of leather than other not split, Leather of other animals, without hair on, prepared than tanned, not of other than further leather heading 4114 Description Gasket made of vulcanised rubber (ethylene-propylene-diene monomers), with permissible outflow permissible with ( monomers), (ethylene-propylene-diene capacitors rubber electrolytic vulcanised of of manufacture dry made the (‘crust’), Gasket for retanned stoppers synthetic sealing tanned rubber bladder chrome Soft moulding split, Tyre leather, Buffalo than 2,6 of more m area with a unit surface or zebu-hybrid of zebu species species Crust leather sheets: veneer Okoume 20 20 30 10 10 10 TARIC CN code 4106 21 00 4106 21 00 4106 31 00 4106 32 90 4106 40 4105 10 00 4105 10 4106 22 90 4106 22 00 4106 92 4105 30 90 4105 30 ex 4016 93 00 ex 4016 99 97 ex 4104 41 51 ex 4016 99 97 ex 4104 41 19 ex 4408 39 30
M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 155
review mandatory End date for End date
31.12.2018 31.12.2016 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2016 31.12.2020 31.12.2018 31.12.2018 31.12.2020 Unit Supplementary ------m -
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0 ) )
1 1 5,2% 0 % 0
0 % 0
)
1
)
1
) 1
)
1 -phenylenediamine and acid isophthalic bleached, entirely of silk bleached, entirely sale not put (noil), retail up for silk waste Yarn spun from entirely ( tampons of manufacture the yarn, for m 120 filaments, than more not but more or 110 filaments of consisting 800 decitex, 1 than more not and a skin of polyamide-6, containing each having of poly(ethylene terephthalate) by weight a core of for use in the manufacture % of poly(ethylene terephthalate), % or more but not more than 77 75 roofings ( and core, terephthalate) poly(ethylene — a — and poly(ethyleneisophthalate), of a copolymer poly(ethyleneterephthalate) an outer layer ( fabrics of filtration for use in the manufacture 000 continuous filaments, 25 than more not but more or 000 continuous filaments 1 containing wick 0,12 but not more than 3,75 of g or more 100 length g and metre of or more, of a weight per m of a ( yarn of carbon-fibre for the manufacture ( for the food by industry fabrics use weight (PLA), for in of filtration polylactide the manufacture — of a thickness 0,5 mm or more, but not more than 4 mm, and sanded, — not planed — not Description Bicomponent monofilament yarn of not more than 30 dtex, consisting of: consisting unbleached, scoured or sale, retail not put up for than yarn spun silk waste) Silk yarn (other from dtex, % 30 98 than cotton, 925 than 989 Six ply yarn of bleached single measuring or more but not dtex dtex per least more at not polyamides obtained by solely of aromatic the polycondensationfibres Yarn of synthetic textile of containing of 650 dtex, or more but decitex yarn untwisted, measuring 1 yarn, not textured, Synthetic bicomponent filament alcohol) 33 monofilament poly(vinyl Bicomponent than of more yarn not filament of Non-textured ( sutures of surgical the acid, manufacture Yarn of for a copolymer of glycollic acid with lactic monofilament 14995) of a form in the of acrylonitrile, % or more yarn, single, containing by weight 85 Synthetic filament EN (norm Biodegradable 10 10 Fabrics for the manufacture of bandages, dressings and medical gauzes medical and dressings bandages, of manufacture the 10 for 10 Fabrics 20 10 20 30 50 70 10 TARIC CN code 5208 11 10 5208 11 ex 5005 00 10 ex 5403 39 00 ex 5005 00 90 ex 5205 31 00 ex 5402 45 00 ex 5402 47 00 ex 5402 49 00 ex 5402 49 00 ex 5402 49 00 ex 5004 00 10 *ex 5402 47 00
M5 M4 ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 156
review mandatory 31.12.2018 End date for End date
2 31.12.2018 31.12.2018 31.12.2018 31.12.2017 31.12.2018 31.12.2016 31.12.2018 31.12.2019 Unit Supplementary ------m
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1 -oxybis(phe ′
)
1 phenylenediamine and p-
m and 2 μ phenylenediamine and 3,4 p-
0 % 0
0 % 0 0 % 0
or more but not more than 50 g/m m or more but not than 280
2 μ m or more μ
–oxybis (phenyleneamine) ′ — of a weight of 20 g/m 20 of weight a — of mm or more but not more than 1 mm, for use in the manufacture of zippers ( of zippers use in the manufacture mm or more but not than 1 mm, for acid, terephthalic of copolymer a and polyamide-6,6, polyurethane 3,4 acid, of a copolymer of terephthalic fibres Synthetic staple nyleneamine), of a length of not more than 7 mm — or more but not than 10 decitex, 6 measuring decitex — of 3,5 of a strength cN/dtex or more — of 30 of a diameter ( products sanitary babies and other of napkins for and napkin manufacture liners the use in for not acetalized or whether fibres, Poly(vinyl alcohol) non-wovens, Poly(vinyl alcohol) or cut into rectangles: in the piece — of a thickness 200 Description Monofilament of poly(1,4-dioxanone) of Monofilament polyimide of dimension of 0,5 with cross-sectional or poly(butylene Monofilaments of polyester terephthalate), Strip yarns of yarns of polyamide-6,6 filament and consisting of warp filament weft fabric, Textile fibres: staple polypropylene Hollow fibres poly(thio-1,4-phenylene) Trilobal 10 20 10 10 10 10 10 10 10 10 40 10 10 20 50 20 10 10 30 TARIC CN code ex 5503 11 00 ex 5503 90 00 ex 5506 90 00 ex 5603 11 10 ex 5603 11 90 ex 5603 12 10 ex 5603 12 90 ex 5603 91 10 ex 5603 91 90 ex 5603 92 10 ex 5404 19 00 ex 5404 90 ex 5407 10 00 ex 5601 30 00 ex 5503 40 00 ex 5601 30 00 ex 5503 90 00 ex 5603 92 90 ex 5404 19 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 157
review mandatory 31.12.2017 31.12.2017 31.12.2018 End date for End date
2 2 2 31.12.2018 Unit Supplementary m - m m
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
1 phenylenediamine m- but not more than 80 g/ more but not
2
)
,
1 2
m in diameter), for the manufacture of napkins the manufacture for m in diameter), μ , containing spunbonded put filaments and meltblown
2 m in diameter) and the inner layer containing super-fine endless containing super-fine and the inner layer m in diameter) μ
m but not more than 5 μ or more, but than 60 not more g/m
2 m but not more than 20 than m but not more consisting of anchored, elevated un-bonded curly fibres, suitable for the engagement of the for suitable un-bonded fibres, anchored, elevated curly consisting of being bonded, area surface the of % 35 remaining and the extruded hook materials, μ and an air resistance (Gurley) of 8 seconds (Gurley) or more but not than and more resistance 36 an seconds air (as determined
2 and napkin liners for babies and similar sanitary napkins ( napkins sanitary and similar babies for and napkin liners m filaments (not less than 1 Non-wovens, not weighing more than 20 g/m 20 than more weighing Non-wovens, not polycondensation of by obtained fibres polyamide aromatic Non-wovens of rectangles into cut or piece the in acid, and isophthalic g/m 30 — weighing — of polypropylene containing fibres or of polypropylene and polyethylene, with: printed, not or — whether having bobbles area % of the circular of 4mm total surface in diameter, on one side, 65 — surface, untextured smooth a side other on — and ( for use in of napkins the manufacture and napkin for babies sanitary articles and liners similar Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m together in a sandwich (not less than way with the two containing fine endless filaments outer layers 10 5636/5 method) ISO by the Description Non-woven: 20 30 30 10 60 40 60 20 30 60 50 TARIC CN code ex 5603 11 10 ex 5603 12 90 ex 5603 13 90 ex 5603 14 90 ex 5603 92 90 ex 5603 93 90 ex 5603 12 90 ex 5603 94 90 ex 5603 12 90 ex 5603 13 90 ex 5603 11 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 158
review mandatory 31.12.2018 31.12.2018 31.12.2020 31.12.2018 End date for End date
2 2 2 2 31.12.2018 31.12.2018 Unit Supplementary m m m m - -
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous and
2 ,
2
,
2 , with non-isotropic tensile strength on , with non-isotropic tensile both directions, to be
but not more than 105 but not more g/m 2
2
or more but not more than 300 g/m
2
the ISO 5636/5 method) or more but or more not more than 265 g/m
2 — on whether or not one laminated side with a membrane or and aluminium filters of a kind of industrial the manufacture used for Non-wovens of polypropylene, Non-wovens of — blown with a melt laminated on layer, each side with spunbonded of polypropylene, filaments g/m 150 than more not of weight a — with nonconductive nonwovens, Electrically of poly(ethylene terephthalate) film consisting of a central coated poly(ethylene terephthalate), of aligned fibres on with unidirectionally each side laminated nonconductive weighing 147 resin, g/ electrical resistant temperature on with high grade both sides m material insulation electrical used as g/m 80 than more of weight a — of — of weight 160 g/m each on laminated elastomer thermoplastic a of layer central meltblown a of Non-wovens consisting side with spunbonded of polypropylene filaments of fibres and Non-wovens, meltblown staple mixture of fibres of a layers consisting of multiple spun with on both sides or one side on laminated not or whether polypropylene and polyester, polypropylene of bonded filaments — by than 75 determined seconds but not more (as of 8 seconds or more (Gurley) resistance an air — and or simply cut into squares rectangles, in the piece impregnated — not Description coating, a with media: polyethylene, bonded spunbonded spun of terephthlate) Non-woven poly(ethylene of consisting Non-wovens, 70 70 40 10 20 70 10 10 20 40 20 40 TARIC CN code ex 5603 12 90 ex 5603 13 90 ex 5603 92 90 ex 5603 13 10 ex 5603 92 90 ex 5603 92 90 ex 5603 14 10 ex 5603 14 90 ex 5603 93 90 ex 5603 94 90 ex 5603 93 90 *ex 5603 13 10
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 159
review mandatory 31.12.2016 31.12.2018 End date for End date
2 2 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary m m - - - - -
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous % 0 ) )
1 1
-oxybis(phe )
′ 1 ,
2 phenylenediamine and 3,4
)
1 p-
0 % 0 m), μ m (± 5 μ ,
2 or more but not more than 150 g/m
2
Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with on each laminated layer, an elastomeric consisting of Non-woven polyolefin fabric, polyolefin filaments: g/m 25 of weight — a g/m 85 of weight a — with ( sutures of surgical the manufacture or braided, with an inner core, for acid, plaited in which are material plastic Knitted or woven coated or covered on one fabrics, side with artificial embedded microspheres acid, terephthalic of copolymer a and 6,6, polyurethane nyleneamine) — or simply cut into squares rectangles, in the piece impregnated, — not properties stretch machine-directional or cross-directional — with ( products care of infant/child for use in the manufacture — with a constant thickness of 95 of thickness constant a — with covered, nor coated — neither 000 m length, 000m to 5 — of 2 in 1 m wide rolls ( of osmosis osmosis and filters reverse coating of membranes in the manufacture for the suitable Description fibres, polyester of made Nonwovens ( rods, having fibre of pen than 50 a length tips of not more manufacture Acrylic cm, for the copolymers and with lactic its of poly(glycolic acid) or of poly(glycolic acid) twine Unsterilised 500 mm Gauze of cotton, of a width of less than 1 consisting of warp yarns polyamide-6,6 and fabric, weft yarns of polyamide- Rubberised textile 80 10 10 50 20 60 20 10 91 10 TARIC CN code ex 5603 92 90 ex 5903 10 90 ex 5903 20 90 ex 5603 93 90 ex 5603 94 90 ex 5607 50 90 ex 5803 00 10 ex 5903 90 99 ex 5906 99 90 ex 5603 93 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 160
review mandatory End date for End date
31.12.2019 31.12.2016 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2018 Unit Supplementary - - - - p/st - -
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
)
1
)
1
m μ 150 coated or covered on entrapped within the synthetic fibres, one side with polytetrafluoro particles ( products of filtration the manufacture for ethylene film, Parts of equipment for the of water by purification reverse osmosis, consisting essentially of plastic- wound which are materials by woven non-woven or based membranes, supported internally textile of not more a wall-thickness casing of plastic tube, and enclosed in a cylindrical round a perforated than 4 of 5 mm, whether or not housed mm or more of a wall-thickness in a cylinder — alloy, or plastic alloy of synthetic diamonds alloy, ceramic agglomerated with a metal which are — of the diamonds, by constant release having effect a self-sharpening wafers, of cutting abrasive for — suitable centre, the in hole a containing not or — whether support a on not or — whether and piece per g 377 than more not of weight a — with mm 206 than more not of diameter external an — with ( friction components fibres with aramid whether or not reinforced Description Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of not more than more not of diameter a of spheres embedded are which in adhesive with coated fabrics, polyurethane Textile with impregnated not containing catalytic or whether not containing polyester, felts, Needle-punched synthetic-fibre pads, polishing polyester non-woven Multi-layered Discs of a thickness of less than 20 mm, material, not mounted, Friction of for use in the manufacture than 0,15 with a thickness of not more not calcined, Agglomerated mica mm, on whether or rolls, 30 92 10 10 40 20 20 10 TARIC
CN code ex 5911 90 90 ex 6814 10 00 ex 5911 10 00 ex 8421 99 00 ex 5911 90 ex 5907 00 *ex 6804 21 00 *ex 6813 89 00 ______
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 161
review mandatory End date for End date
31.12.2017 31.12.2018 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary - p/st ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
of the not cross-section, less than one continuous
2
0 % 0 of cross section
2
) rollers or balls ) rollers 4
N
3 of the surface of the cross section one or more closed channels at the tail end the tail closed channels section one at or more of the cross of the surface
2 furnaces for production of semiconductor materials 10 of diameter internal an 0,20 mm), 0,00 mm/- (+ mm 29 than more not but 0,10 mm) 0,00 mm/- thickness a 0,00 mm/-0,30 mm), (+ mm 19 than not more but 0,20 mm) 0,00 mm/- (+ more or mm more, or 240 °C resistance heat and 0,20 mm) (± 3,70 mm to 0,10 mm) (± mm 2 from variable containing by weight: %) of aluminium oxide 1,5 % (± — 90 — 7 % (± 1 %) of titanium oxide cm having, per 65 l, than not more volume of oxides, containing by of ceramic made of continuous weight: filaments articles Ceramic more of diboron % or trioxide, — 2 of silicon dioxide, and % or less — 28 of dialuminium trioxide % or more — 60 with a hardness of less than 9 on the Mohs volume with a total of not more than 65 scale, litres, cm having, per one duct least and at than 65 litres not more volume of total a with aluminium and titanium; cm per (open on both one or ends) channel which may be open at both ends or stopped at one stopped channel which may be open end both ends or at at Description Ceramic proppants, containing aluminium oxide, silicon oxide and iron oxide iron tubes and into diffusion and holders, of a kind oxidation used insertion reactor for Silicon carbide and oxide of 19 section having mm or more (+ diameter an external transversal ring with rectangular Ceramic silicon oxide, (Si aluminium nitride containing Silicon proppants, Ceramic pieces, of an overall ceramic or mullite consisting of porous Supports cordierite for catalysts, consisting Supports catalysts, of porous pieces, of a blend for and ceramic of silicon carbide silicon, from oxides consisting of porous made primarily Supports of or filters, ceramics for catalysts 50 20 20 15 20 25 30 60 70 TARIC CN code ex 6909 19 00 ex 6909 19 00 ex 6909 19 00 ex 6909 19 00 ex 6914 90 00 ex 6909 19 00 ex 6909 19 00 ex 6903 90 *ex 6909 19 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 162
review mandatory End date for End date
31.12.2016 31.12.2019 31.12.2016 31.12.2018 31.12.2020 31.12.2017 Unit Supplementary p/st - - - p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m or less, and m or less, μ
m μ
)
1
— laser-engraved — 66 % or more of silicon carbide, % or more — 66 of aluminium oxide % or more — 10 for maintaining of diodes the operating transistors, temperature in and products circuits integrated of ( headings 8521 8528 or diameter of more than 125 — (± 5 micrometre), proof coating of a thickness 45 micrometre a scratch — thickness of 0,45 a total mm or more but not than 1,1 mm, 210 mm, 3 than more not but — more or 300 mm of width a 000 mm, — a length of 300 mm or more but not than 2 % or more; — of 90 light transmission a visible — distortion of 55° an optical or more — of a thickness 4,0 mm or more but not than 4,2 more mm, % or more measured using D-type light source, a — of 91 transmission with a light layer reflective dioxide tin doped fluorine a with surface one on — coated 1 of variation thickness total a — with — with a thickness of 1,7 mm or more but not than 1,9 mm, % or more, measured with a D-type light source, — of 91 transmission with light layer, reflecting a as dioxide tin fluorine-doped with side one on — coated edges worked — with Description Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a of weight: dioxide, by zirconium containing and sinks, dioxide heat silicon Ceramic from with: obtained sheet transparent, glass microspheres, flat Ceramic drawn Alkali-aluminosilicate glass float glass: borosilicate Float of made wafer Glass glass: Float 80 30 10 10 25 70 TARIC CN code ex 6914 90 00 ex 7005 10 30 ex 7006 00 90 ex 7006 00 90 ex 6909 19 00 *ex 7004 90 80
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 163
review mandatory End date for End date
31.12.2019 31.12.2018 31.12.2018 31.12.2017 31.12.2020 Unit Supplementary - - - p/st -
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
) 1
cm), consisting of tempered glass; provided either with a mesh film and a near-infrared absorbing and a near-infrared with a mesh film glass; provided cm), consisting of tempered either on layer one or both or a sputtered conductive with optional sides, additional anti-reflex layer, film ( within of products heading falling for use 8528 in the manufacture cm), consisting of 2 and sandwich together; provided with a mesh plates laminated either a film near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or both sides plate, backing plastic with equipped not or — whether element, heating a with equipped not or — whether display (BSM) Module Spot Blind with equipped not or — whether — whether or not layer of chrome, a and adhesive, hot-melt or tape adhesive break-resistance side, — a back the at paper protective and side front the on film release — a of vehicles mirrors rear-view of a kind interior used for support mirror — a and casing plastic — a circuit integrated — an ( of Chapter 87 of motor vehicles for use in the manufacture Description Layered glass with mechanical dimming ability by different angles of incident light comprising: light mirrors: incident Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not more than 185,42 cm (± 1,5 vehicle of motor angles for different Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not more than 185,42 cm (± 1,5 glass by auto-dimming ability Electro-cromic dimming mechanical with glass Layered of: consisting mirror, rear-view inside self-dimming Electrochromic 10 10 10 30 40 TARIC CN code ex 7009 10 00 ex 7007 29 00 ex 7009 10 00 ex 7007 19 20 *ex 7009 10 00
M5 M4 ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 164
review mandatory End date for End date
31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2017 31.12.2018 31.12.2017 31.12.2020 31.12.2020 Unit Supplementary p/st p/st ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m μ m (± 0,5 m (± μ
m predominate μ m or more but not μ m or more but not more than 5,83 but not more than m or more μ
m) μ m or more but not more than 5,83 but not more or more m μ m/+ 1,5 μ m, in which filaments of a diameter of 3 of a diameter m, in which filaments μ m (- 1 m (- μ m or of 4,5 μ
m predominate, other than those treated so as to improve their adhesion so as to improve their to elas m predominate, other than those treated μ
mm or more but mm or more not more than 0,13 mm; m) μ tomers — a length of 1 516 mm (± 1 mm); 1 (± mm 516 1 of length — a mm); 1 (± mm 553 of width — a mm); 0,1 (± mm 3 of thickness — a — thickness of 0,11 with a film, polyethylene (PE) covered with protective the mirror back of the and mg/kg, 90 than more not of content lead — a — of 72 hours 9227 or more according a corrosion resistance to ISO spray test salt signalling glassware % 300 tex and of a loss on 600 ignition of 4 tex or more but not more than 3 Rovings, measuring 2 ASTM D 2584-94 by the method) determined (as % by weight 8 than but not more or more of poly layer 500 with a tex, coated Rovings, than 2 more but not measuring 650 tex or or not mixed with other materials urethane whether 884 tex, coated with a layer of an acrylic Rovings, measuring 392 tex or more but not more than 2 copolymer Rovings ranging from 1 980 to 2 033 tex, composed of continuous glass filaments of 9 3,5 of nominal diameter more than 5,2 of 9 of a diameter with fibres of 4,83 of a diameter in which filaments filaments, predominate of 4,83 a diameter of in which filaments cathode ray tubes cathode ray Description Unframed glass mirrors with: mirrors glass Unframed than those of heading 7015), worked, (other other than of glass not optically elements Optical obtained %), from continuous of a spun-glass filaments (± 7,5 Yarn of 33 thereof tex or a multiple made continuous %) from spun-glass filaments S-glass yarn of 33 tex or a multiple of 33 tex (± 13 Yarn of 10,3 but tex or more not more than 11,9 continuous tex, obtained from spun-glass continuous spun-glass filaments, obtained from than 6,0 tex, but not more more or of 5,1 tex Yarn 01 02 03 05 21 22 23 25 Glass envelopes (including bulbs and tubes), open, and glass parts thereof, without fittings, for fittings, without thereof, parts glass and open, tubes), and bulbs (including 10 envelopes Glass 10 10 15 20 25 TARIC CN code 7011 20 00 7011 20 ex 7019 12 00 ex 7019 12 00 ex 7019 12 00 ex 7019 12 00 ex 7014 00 ex 7019 12 00 ex 7019 12 00 ex 7019 12 00 ex 7019 12 00 ex 7019 19 10 ex 7019 19 10 *ex 7009 91 00 *ex 7019 19 10 *ex 7019 19 10
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 165
review mandatory End date for End date
31.12.2019 31.12.2016 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2016 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
)
1 m m, μ μ m or 9 m or μ
m or more but not more than 7,61 more but not m or μ
m, in which filaments of a diameter of 6,35 of diameter a of filaments which m, in μ
predominate diameter of 7 % by weight or more of silicon dioxide, of a of 6 nominal diameter containing 93 other than those treated % of magnesium oxide, more but not than 16 % or more — 9 % of aluminium oxide, but than 25 % or more not more — 19 % of boron oxide, more but not than 2 % or more — 0 oxide, calcium — without formaldehyde resin and coated with a latex comprising a resorcinol- chlorosulphonated at least polyethylene high modulus glass twisted obtained from rubber, with impregnated (K) cord High modulus glass with or without resin yarns, coated with a latex comprising a resorcinol-formaldehyde filament (HNBR) rubber hydrogenated vinylpyridine and/or acrylonitrile-butadiene yarns, coated glass filament twisted obtained from plastic, rubber or Glass cord impregnated with and an acrylonitrile- resin a resorcinol-formaldehyde-vinylpyridine least comprising at latex with a butadiene rubber (NBR) yarns, coated glass filament twisted obtained from plastic, rubber or Glass cord impregnated with and chlorosulphonated resin polyethylene a resorcinol-formaldehyde least comprising at latex with a Description Yarn of E-glass of 22 tex (± 1,6 tex), obtained from continuous spun-glass filaments of a nominal a of filaments spun-glass continuous from of: obtained up tex), made 1,6 filaments, (± U-glass tex or 22 K- of from E-glass obtained of plastic, Yarn or rubber with impregnated %), obtained from continuous spun-glass filaments, Yarn of 11 tex or a thereof (± 7,5 multiple cord Glass ( Non-woven or catalysts product filters for the of air manufacture of non-textile glass fibre, 60 70 80 30 20 40 30 50 55 50 TARIC CN code ex 7019 19 10 ex 7019 19 10 ex 7019 19 10 ex 7019 19 10 ex 7019 19 10 ex 7019 90 00 ex 7019 90 00 ex 7019 90 00 ex 7019 39 00 ex 7019 19 10
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 166
review mandatory End date for End date
31.12.2016 31.12.2018 31.12.2018 31.12.2018 31.12.2016 31.12.2016 31.12.2018 31.12.2020 31.12.2016 Unit Supplementary - - p/st - - - - - p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
m predominate μ
)
1 temperature of 152 but not more than 153 °C according IPC-TM-650) or more °C (measured temperature more than 218° Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion thermal of coefficient a with epoxy resin, with rovings, impregnated of Woven fabrics between 30 °C and 120 according to IPC-TM-650) of: °C (measured — 10ppm °C or more but not than 12ppm length and per °C in the width, and per transition glass a with thickness, the — in °C 30ppm per than more not but more or °C 20ppm per stands of television fixation to and Television pedestal with or without bracket for stabilization cabinet case/body of not more than 150 mm % of silicon of not more than 150 mm, containing by weight not more than 1 of dysprosium, % or more and — 78 % of iron but than 22 % or more not more — 18 Rock bolt: screw, self-tapping a — being mm, 300 than more of length a — with of a kind support used mines for of — a thickness of 2,67 mm or more, but not more than 4,11 mm, — a width of 12,57 mm or more, but not more than 16,01 mm, — a torque of 18,05 Nm or more, but than not more 73,5 Nm — position and an angle between the free the nominal of 76° position in exercise or more, but not for use power combustion in the manufacture of tensioners for transmission belts, for internal engines ( Description Non-textile glass fibres in which fibres of a diameter of less than 4,6 Pig iron ingots with a length of not more than 350 mm, a width than 150 of not more mm, a height weight: by Pig iron ingots with a length of not more than 350 mm, a width than 150 of not more mm, a height containing with: Ferro-dysprosium, steel, tempered of spring spiral Flat 11 10 20 19 77 29 10 10 10 Ferro-silico-chromium 10 91 TARIC CN code 7202 50 00 7202 50 ex 7019 40 00 ex 7020 00 10 ex 7318 14 99 ex 7019 90 00 ex 7616 99 90 ex 7201 10 30 ex 7318 14 99 ex 7320 90 10 ex 7019 40 00 *ex 7201 10 11 *ex 7202 99 80
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 167
review mandatory End date for End date
31.12.2019 31.12.2016 31.12.2020 31.12.2016 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary p/st ------
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
laminated on each side with glass-fibre fabric and impregnated with epoxide or fabric resin, on each side with glass-fibre laminated anchors more than 0,070 mm, and compacted by sintering rolling — whether or not material with parts of other — whether or not metals with parts of other treated surface not or — whether printed not or — whether of a kind the production controls used for of remote of graphite and copper, with: foil Roll of laminate and 620 mm, than more not but — more or 610 mm of width a — of 690 mm or more but not than 710 a diameter mm, ( vehicle batteries of lithium-ion electric for use in the manufacture reinforced with fabric, covered glass-fibre on both sides with copper foil or on both sides with a copper foil — of any type of nonwovensheet one central paper or fibre, of layer a central least consisting of at — of paper, impregnated with phenolic resin, layers consisting of multiple coated on one with a maximum thickness of 0,15 or both sides with a copper mm film Description Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side one Anchor head of hot dipped iron of the kind galvanized ductile cast used in the production of earth weights on steel covered 0,001 but not of more mm or of diameters wires steel of stainless mass a consisting of fleece, Metal and fibre, Iron glass and/or resin epoxide containing not or whether polyimide, or containing dioxide aluminium oxide of polytetrafluoroethylene, as filler or titanium Sheet or plate of Film plates: or Sheet 10 60 30 20 20 40 10 30 40 TARIC CN code ex 7410 11 00 ex 8507 90 80 ex 7326 20 00 ex 8545 90 ex 7410 21 00 ex 7410 21 00 ex 7410 21 00 ex 7325 99 10 *ex 7326 90 98
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 168
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2017 Unit Supplementary - - - - - p/st
- duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
0 % 0 1
m, μ 4% ,
2
) )
1 1 measuring frequency of 10GHz, as measured according to IPC-TM-650 of more than 170 (Tg) °C (according to temperature with a glass transition synthetic resin IPC-TM-650, method 2.4.25), — covered on one or both sides with copper foilwith a thickness of not more than 0,15 mm, and mm, 0,15 than more not — of impregnated with epoxide fabric resin, one of fibreglass least layer consisting of at thickness a foilwith copper with sides both a or at 0,015 one than on less — covered of (Df) factor loss a and 3,9 than less of (DK) constant dielectric a — with 25 than more not of thickness maximum a — with — on coated with a maximum thickness of 0,15 both sides with a copper film mm, 1,09pF/mm of capacitance minimum a — with or artificial one of woven with at least layer with a fire-retardant impregnated — glass fibre, — coated on one or both with a thickness of not than sides with a copper film more 0,15 mm, ( boards of circuit for use in the manufacture molybdenum consisting of with deposition material, silicide: Disc (target) — containing 1mg/kg or less of sodium, and support aluminium or copper a on — mounted Profiles made of aluminium alloy conforming to EN standard AW-6063 T5 — anodized lacquered not or — whether %) than 0,8 1,2 but not more mm (± or more %) — 1,2 thickness of 0,5 mm (± with a wall ( of goods for use in the manufacture of heading 8302 for use in the manufacture of circuit boards ( boards of circuit for use in the manufacture Description Plates: resin: and of synthetic or artificial rolls sheets Plates, sheets: or rolls Plates, lithium containing alloy aluminium of billets and Slabs 91 10 60 30 Slabs and billets of unwrought aluminium alloys aluminium 50 unwrought 60 of 70 billets and Slabs 10 TARIC CN code 7601 20 20 7601 20 ex 7419 99 90 ex 7604 21 00 ex 7410 21 00 ex 7410 21 00 ex 7616 99 90 ex 7601 20 ex 7604 29 90 ex 7410 21 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 169
review mandatory End date for End date
31.12.2019 31.12.2020 31.12.2019 31.12.2018 31.12.2016 Unit Supplementary - - - m -
duty 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0 Sheets and bars of aluminium-lithium alloys Sheets and bars of aluminium-lithium % of zinc, and more but not than 7 % or more — 0,25 % of magnesium, and more but not than 3 % or more — 1 % of copper, and more but not than 5 % or more — 1 manganese of % 1 than more — not AMS QQ-A-225, a kind specifications industry of used in aerospace the material consistent with (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process of copper of a thickness 0,032 a layer mm or more but not than 0,117 mm % of copper, and more but not than 5 % or more — 0,10 % of magnesium, and % or more but not than 6 — 0,2 % of zinc, and more but not than 7 % or more — 0,10 manganese of % 1 than more — not AMS QQ-A-430, a kind specifications industry of used in aerospace the material consistent with (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process % by — weight, having a purity of 99,99 — of a thickness 0,021 but than mm or more not more 0,2 mm, mm, 500 of width a — with thick, nm 4 to 3 by layer oxide surface a — with % 95 than more of texture cubic a with — and Description Bars and rods of aluminium alloys containing by weight: by containing alloys aluminium of rods and Bars weight: by containing alloys aluminium of of 2 mm or more but not more than 6 mm, covered with of a diameter Not alloyed aluminium wire, Wire rolls: in foil Aluminium 10 20 40 10 10 40 TARIC
CN code ex 7607 11 90 ex 7604 29 10 ex 7605 19 00 ex 7605 29 00 ex 7606 12 99 *ex 7604 29 10 ______
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 170
review mandatory End date for End date
31.12.2018 31.12.2019 31.12.2016 31.12.2016 31.12.2017 31.12.2018 Unit Supplementary - - - - p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
)
1 — an aluminium content of 99,98 % or more — an aluminium content of 99,98 — a thickness of 0,070 but mm or more not more than 0,125 mm texture cubic a — with etching high voltage for kind used a of and of lithium manganese bonded a roll consisting of laminate form of Sheet in the to aluminium, with: and 605 mm, than more not but — more or 595 mm of width a — of 690 mm or more but not than 710 a diameter mm, ( vehicle batteries of cathodes for use for lithium-ion electric in the manufacture aluminium of a thickness not more than 0,040 mm, polyamide and polypropylene and base films, of lithium the manufacture use in corrosion by coating against hydrofluoric acid, for a protective ( polymer batteries — of 60 but not than 420 mm or more more an outer diameter mm, and — thickness of 10 mm or more but not than 80 a wall mm of 172 l (± capacity embedded a storage composite, of in an overwrap of epoxy-carbon fibres 10 %) and an unfilled weight of not more than 64 kg dimensions of: with Aluminium engine bracket, — than 10 height of more mm but not more than 200 mm — width of more than 10 mm but not more than 200 mm — than 10 length of more mm but not more than 200 mm equipped two fixing holes, made of aluminium alloys ENAC-46100 least with at or ENAC-42100 (based on the norm EN:1706) with following characteristics: Description Plain aluminium foil with the following parameters: following the with foil aluminium Plain wholly hydrogen, compressed or gas natural not more than 0,123 of thickness of layer mm, total comprising of a of a film Aluminium laminated compressed for seamless, aluminium alloyed extruded tubes with: Seamless container, Aluminium 10 30 80 50 60 10 30 20 TARIC
CN code ex 7607 19 90 ex 8708 99 97 ex 8507 90 80 ex 7607 20 90 ex 7608 20 89 ex 7613 00 ex 7607 11 90 *ex 7616 99 10 ______
M5 M4 ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 171
review mandatory End date for End date
31.12.2018 31.12.2016 31.12.2017 31.12.2019 31.12.2020 31.12.2017 Unit Supplementary p/st p/st p/st - - p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0 0 % 0 )
1
m μ m
μ
m or more, but not more than 5,0 m or more,
μ — of 40 Ohm or more but not than 300 a resistance Ohm 1 at length of metre of a kind windows used front in the production of heated car Connecting components for use in the production of helicopter tail rotor shafts ( shafts rotor tail helicopter production of the in use for Connecting components aluminium, painted — of 500 mm, 011 mm or more but not than 1 — with a length of 1 — with a width of 622 mm or more but not than 900 mm, — 0,1 mm), (± 0,6 mm of thickness a with of a kind of TV used sets in the manufacture 50 than more not of dimension cross-sectional maximum — a % or more, and — a purity by weight of 99 1,0 of size particle — a plate, backing alloy copper-chromium — a and mm, 312 of diameter — a mm 6,3 of thickness — a — internal porosity not more than 1 mm; 1 than more not porosity — internal — outer porosity not more than 2 mm; more or 10 HRB hardness — Rockwell of a kind used in the production of suspensions engines in systems for motor vehicles Description Parts in the shape of a rectangular frame: rectangular a of shape parts Honeycomb aluminium blocks of aircraft type used of the in the manufacture the in Parts tungsten % or more of with: Tungsten containing by wire weight 99 with: powder with: Molybdenum target sputtering Tantalum 70 10 40 15 75 10 10 10 TARIC CN code ex 7616 99 90 ex 8482 80 00 ex 7616 99 90 ex 8803 30 00 ex 7616 99 90 ex 8102 10 00 ex 8103 90 *ex 8101 96 00
M4 M5 ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 172
review mandatory End date for End date
31.12.2018 31.12.2020 31.12.2018 31.12.2017 31.12.2018 31.12.2018 31.12.2020 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
— of purity by weight of more than 99,5 % — of purity by than 99,5 weight of more — size of 0,2 with a particle mm or more but not more than 0,8 mm coated on one to light side with an epoxy insensitive resin cobalt, %) 2 (± % — 35 nickel, %) 1 (± % — 25 and chromium, %) 1 (± % — 19 — 7 % (± 2 %) iron AMS industry 5842, kind aerospace used a specifications in the of material conforming to the 0,224 mm — with a height of 17,8 cm or more, a length of 180 cm or more and a width of 48,3 cm or more, — a weight of 680 kg or more, by weight of: elements containing alloy % of aluminium more but not than 6 % or more — 3 % of tin % or more but not than 5 — 2,5 zirconium % of % or more but not than 4,5 — 2,5 % of niobium % or more but not than 1 — 0,2 % of molybdenum % or more but not than 1 — 0,1 silicon % of % or more but not than 0,5 — 0,1 Description Ground and polished magnesium sheets, of dimensions not more than 1 500 mm × 2 000 mm, 000 2 × mm 500 1 than more not dimensions of sheets, powder magnesium Magnesium polished and Ground containing, made of cobalt alloy by Bars or wires weight: sponge Titanium ingot, % by weight or more passes through of a sieve with an aperture Titanium powder of which 90 alloy Titanium 35 % by weight of magnesium Unwrought magnesium, 99,8 containing at least 10 10 10 30 40 TARIC CN code 8104 11 00 8104 11 ex 8108 20 00 ex 8104 90 00 ex 8105 90 00 ex 8108 20 00 ex 8108 20 00 *ex 8104 30 00
M5 M4 ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 173
review mandatory End date for End date
31.12.2020 31.12.2020 31.12.2018 31.12.2019 31.12.2017 31.12.2016 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
)
1
— with a height of 17,8 cm or more, a length of 180 cm or more and a width of 48,3 cm or more, — a weight of 680 kg or more, by weight of: elements containing alloy % of aluminium more but not than 7 % or more — 3 % of tin more but not than 5 % or more — 1 % of zinc more but not than 5 % or more — 3 % of molybdenum more but not than 8 % or more — 4 — of 63,5 or more and with a diameter cm a length of 450 cm or more, 350 kg or more, — a weight of 6 by weight of: elements containing alloy aluminium, % of % or more but not than 6,7 — 5,5 vanadium % of % of more but not than 4,9 — 3,7 % of aluminium not than 2 more and exhaust pipes of of silencers manufacture use in the % of aluminium, for more than 2 subheadings 8708 92 or 8714 10 00 ( of vanadium, %) and 3 % (± — 22 %) of aluminium 0,5 % (± — 4 Description Titanium alloy ingot, alloy Titanium ingot, alloy Titanium weight: by containing Waste and scrap of titanium and titanium alloys, except those % containing or more by but weight 1 alloy titanium rods complying Titanium alloy with standard EN 2002-1, EN 4267 or DIN 65040 an % or more but not and of titanium aluminium, containing Bars, by rods and of alloy weight 1 wire of Wire 50 60 10 10 20 40 TARIC CN code ex 8108 30 00 ex 8108 20 00 ex 8108 90 30 ex 8108 90 30 ex 8108 90 30 ex 8108 20 00
M4 M5 ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 174
review mandatory End date for End date
31.12.2020 31.12.2018 31.12.2019 31.12.2017 31.12.2017 31.12.2018 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
) 1
) 1
and 4967 aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not more than 3,1 mm, of a 254 of mm, goods for the manufacture of 000 mm or more but not more than 1 width of 1 subheading 8714 10 00 ( copper, % of % or more but not than 1,2 — 0,8 % of tin, % or more but not than 1,15 — 0,9 % of silicon, and more but not than 0,45 % or more — 0,25 % of niobium, % or more but not than 0,35 — 0,2 or foil strips in sheets, plates, use in silicon, in sheets or rolls, for of: the manufacture or engines, combustion internal for systems — exhaust ( 60 90 — tubes and pipes of subheading 8108 % of % or more but not more than 0,6 % of copper and 0,4 % or more but not more than 1,2 0,8 niobium weight: aluminium, % of % or more but not than 0,6 — 0,4 % of silicon, and more but not than 0,55 % or more — 0,35 niobium % of % or more but not than 0,3 — 0,1 Description Titanium-aluminium-vanadium alloy (TiAl6V4) wire, complying with AMS standards 4928, 4965 4928, standards AMS with weight: complying by wire, containing (TiAl6V4) niobium alloy and Titanium-aluminium-vanadium silicon, tin, copper, % of but not than 2 % or more more and Alloy of titanium aluminium, containing by weight 1 titanium, of Alloy % of % or more but not than 0,60 Alloy of titanium and silicon, containing by weight 0,15 sheets, strips and Plates, foils of an alloy titanium, copper and niobium, containing by weight and sheets, Plates, strips foils of an alloy titanium, aluminium, silicon and niobium, containing by 50 10 15 30 50 60 TARIC CN code ex 8108 90 50 ex 8108 90 50 ex 8108 90 50 ex 8108 90 50 ex 8108 90 50 *ex 8108 90 30
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 175
review mandatory End date for End date
31.12.2016 31.12.2016 31.12.2016 31.12.2019 31.12.2019 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary - - - - p/st - - -
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
) 1
0 % 0 ),
2
0 % 0 — 15 % (± 1 %) of vanadium %) 1 % (± — 15 %) of chromium 0,5 % (± — 3 %) of tin and 0,5 % (± — 3 %) of aluminium 0,5 % (± — 3 aluminium, and % of % or more but not than 0,7 — 0,3 % of silicon more but not than 0,6 % or more — 0,25 — than 750 of a width of more mm — of a thickness not than 3 more mm % by weight of oxygen — (O containing than 0,07 more and of spectacle frames mountings, Parts including bolts of the kind and frames used for spectacle mountings, of an alloy titanium ( in of tubes, the manufacture bars or ingots industry the enlarged by chemical remelting for — of a thickness 0,4 mm or more but not than 2,5 more mm 170 than more not of standard HV1 hardness Vickers the to — conforming of a kind power of welded plant condensers tubes for nuclear used in the manufacture Description Strip of an alloy of titanium, containing by weight: by containing weight: titanium, by of containing alloy alloy, an titanium of of Strip titanium foil non-alloyed and of strips foil sheets, and Plates, strips sheets, Plates, of non-alloyed Strip or foil titanium: ingots of form the Non-alloy sponges % of zirconium hafnium for use in or ingots, containing by weight more than 0,01 Antimony Alloy of niobium of bars and (columbium) and rods titanium, in the form 20 10 70 75 80 85 10 10 10 TARIC CN code ex 8108 90 90 ex 8108 90 50 ex 8108 90 50 ex 9003 90 00 ex 8109 20 00 ex 8110 10 00 ex 8112 99 30 ex 8108 90 50 *ex 8108 90 50
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 176
review mandatory End date for End date
31.12.2019 31.12.2017 31.12.2020 31.12.2016 31.12.2017 31.12.2020 Unit Supplementary - - - p/st p/st p/st
duty 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0
) 1
modules frame of manufacture the in use for sheets, metal of throating and bordering bending, calibrating, ( parts of motor vehicles Keypads or plastic, of silicone — epoxide or wood reinforced resin glass fibre whether or not plastic, with parts of metal, — treated whether or not or surface printed elements conducting electrical with not or — whether keyboard the on glued foil keypads with not or — whether foil protective with not or — whether multilayer or — single Description Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT- in circuits packaging electronic for for used (AlSiC-9) composite punching, carbide (AlSiC) cutting, diamonds silicon carbide drawing, agglomerated aluminium silicon pressing, of of aluminium cold-forming, parts plate of for % or more of boron carbide % or more of aluminium and 5 Cermet blocks containing by weight 60 working Carrier made tools with press spacer tools tandem Cuboid drilling and/or for transfer Inserts of Set 20 40 30 20 20 20 83 30 70 30 30 95 70 70 20 40 40 10 10 20 10 10 TARIC CN code ex 8413 91 00 ex 8419 90 85 ex 8438 90 00 ex 8468 90 00 ex 8476 90 00 ex 8479 90 80 ex 8481 90 00 ex 8503 00 99 ex 8515 90 00 ex 8531 90 85 ex 8536 90 85 ex 8537 10 99 ex 8543 90 00 ex 8708 91 99 ex 8708 99 97 ex 8113 00 90 ex 8207 19 10 ex 8113 00 90 ex 8207 30 10 ex 9031 90 85 ex 8113 00 20 *ex 8301 60 00
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 177
review mandatory End date for End date
31.12.2020 31.12.2018 31.12.2019 31.12.2019 31.12.2018 31.12.2017 Unit Supplementary p/st p/st - p/st p/st -
duty 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0
) 1 0 % 0
)
1
and a power of not less than 6 kW but not exceeding 20,0 kW, for the exceeding 20,0 kW, for 6 kW but not than not less of power and a
3 mowers of heading 8433 11 90, 11 mowers of heading 8433 10, 8433 20 or — 21 of mm or more but not than 23 mm, diameter an external 23 mm, than not more but — more or 19 mm of screw with width a ring, outer plastic U-shaped — a — and used as an inner ring diameter to the internal fitted an assembly screw — of 99,00 but than 136,5 with a diameter mm or more not more 1mm), mm (± aperture ‘ring-pull’ a with not or — whether pre-tension gas Metal casing for automobile safety belt generators combustion internal piston engines, or rotary having a cylinder capacity Spark-ignition reciprocating of not less than 300 cm manufacture of: lawn hand-operated and 51, 11 subheading 8433 of seat a with mowers, lawn — self-propelled mower, lawn a of that is function main whose 11, 90 8701 subheading of — tractors — capacity of not four stroke mowers with motor of a cylinder less than 300 cc of subheading ( 20 8430 subheading of blowers snow and — snowploughs Description Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors ( reactors elements with nuclear chemical Castors, in absorbing use neutron for with ends: (elements) filled can modules rods, Aluminium fuel control hexagonal absorber Non-irradiated steel Stainless 10 10 10 10 10 10 10 20 10 20 10 TARIC
CN code ex 8405 90 00 ex 8708 21 10 ex 8407 33 20 ex 8407 33 80 ex 8407 90 80 ex 8302 20 00 ex 8309 90 ex 8401 30 00 ex 8401 40 00 ex 8708 21 90 ex 8407 90 ______
M5 M4 M5 M4 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 178
review mandatory End date for End date
31.12.2016 31.12.2016 31.12.2016 31.12.2020 31.12.2018 31.12.2018 31.12.2017 Unit Supplementary - - - - - p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 for use in the manu
3
)
1
) ) )
1 1 1
)
1 , and
3
) 1 facture of garden equipment of heading 8432, 8433, 8436 or 8508 ( of garden equipment of heading facture 8432, 8433, 8436 8508 or — output of 15 a rated kW or more but not than 85 kW, ( of vehicles heading 8427 for use in the manufacture — 6 cylinders, — 6 — an output of 75 kW or more, but than 80 not more kW, — continuously and exhaust valves modified to operate inlet in heavy duty applications, ( of vehicles heading 8427 for use in the manufacture ( facture of vehicle mounted temperature control systems ( control systems vehicle mounted temperature engine having: cooled, compression-ignition liquid cycle, 4 4 Cylinder, cm 850 3 than more not of capacity — a Exhaust manifold complying EN with standard DIN 13835, whether or not with turbine housing, drilled is turned, milled, that of exhaust manifold manufacture use in the ports, for inlet with four ( and/or processed by other means Injectors with solenoid valve for optimised atomisation in the engine combustion chamber Description Compact Liquid Petroleum Gas (LPG) Engine System, with: System, Engine (LPG) Gas Petroleum engines Four-stroke petrol of a cylinder capacity not more than 250 cm Liquid Compact manu use in the than 15 a power of not more engines for kW, of with 2 or 3 cylinders, Diesel of engines of a power not more than 30 Diesel use in the manufacture kW, with 4 cylinders, for 40 30 10 10 50 20 85 10 20 20 20 TARIC
CN code ex 8409 91 00 ex 8408 90 45 ex 8409 99 00 ex 8409 99 00 ex 8408 90 47 ex 8408 90 41 ex 8408 90 43 ex 8479 90 80 *ex 8408 90 43 *ex 8407 90 10 *ex 8407 90 ______
M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 179
review mandatory End date for End date
31.12.2018 31.12.2017 31.12.2018 31.12.2019 31.12.2020 Unit Supplementary p/st p/st p/st - p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
fluid per minute,
3 DIN G- NiCr13Al16MoNb or DIN NiCo10W10Cr9AlTi or AMS AISI:686, 20 mm or more but not than 40 mm, and Spiral-shaped gas turbine turbocharger component: °C, 050 1 than more not of heat-resistance a — with — of 30 mm or more, but not than 110 wheel hole diameter more with a turbine mm, — an engine exhaust manifold not with or whether or NiCr13Al6MoNb G- DIN standard with complying alloy based nickel precision-cast a — of °C; 100 1 than more not of heat-resistance a — with — of 30 mm or more, but not more than 100 with a diameter mm; — with a height of 20 mm or more, but than 70 not more mm of distance operating an having sleeves, connecting and horns conducting with not or — whether mm, 350 than more not of length a — with mm, 75 than more not of diameter a — with mm 110 than more not of height a — with cm 400 least at — discharging alloys, aluminum of — consisting — of 38 mm or 50 mm, with a diameter surface, its on formed grooves annular concentric, two — with — anodized, of a kind engines with petrol used in motor vehicles — with a noise level limited to 6 dBA, 6 to limited level noise a — with — of the suction opening with the inside diameter and discharge outlet of not than more 15 mm, °C 10 - to down temperatures ambient at — working Description Wheel-shaped gas turbine component with blades, of a kind used in turbochargers: in used kind a of blades, with component turbine gas Wheel-shaped turbocharger: single-stage a for Actuator pump: centrifugal phase Single cover: pump Fuel 30 70 60 80 20 30 TARIC CN code ex 8409 99 00 ex 8411 99 00 ex 8413 91 00 ex 8411 99 00 *ex 8411 99 00 *ex 8413 70 35
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 180
review mandatory End date for End date
31.12.2016 31.12.2019 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2020 Unit Supplementary - - - - - p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous ,
3
)
1
)
1
)
1
)
1
) 1 variable speed motors that has of a resistance 70 minimum temperature °C (± 5 °C), of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm more than volume of not displacement a 10 kW, than with but not more more of 0,5 kW or equipment of the type used in refrigeration Hermetic rotary compressors for Hydro-Fluoro-Carbon (HFC) refrigerants: — (BLDC) driven current’ by (AC) or ‘brushless direct current' ‘on-off’ single phase alternate kW 1,5 than more not of rating power nominal a — with of a kind used in the production of household pump heat laundry tumble dryers than 0,4 than 10 kW more kW but power of not more motor, electric an — with — of an output of not more than 125 W ( of computers for use in the manufacture ( products of heading 8521 or 8528 Cross-flow fan with: — a height of 575 mm (± 1,0 or more, but mm) not more than 850 mm (± 1,0 mm), — of a 95mm diameter material (± 0,6 mm) or 102 mm (± 0,6 raw mm), plastic reinforced fibre glass % 30 heat-resistant, and anti-bacterial anti-static, — an ( of indoor for use in the manufacture air conditioning units of split-type machines vehicles ( ( motor vehicles Description Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating power nominal a with compressors, scroll electric variable-speed semi-hermetic or Hermetic fan: conditioning Vehicle air system part, consisting of an compressor of a open reciprocating shaft motor Axial of machines of conditioning machines air conditioning of of use in the manufacture an output 2 of not more than motor, of W, for with an electric Axial fan air compressors of into compressors incorporation into for incorporation pistons, for Aluminium system, Pressure-regulating 60 40 30 60 50 20 30 40 20 30 TARIC CN code ex 8414 30 81 ex 8414 59 80 ex 8414 80 73 ex 8414 30 89 ex 8414 59 20 ex 8414 90 00 ex 8414 90 00 ex 8414 90 00 ex 8414 30 81 *ex 8414 59 20
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 181
review mandatory End date for End date
31.12.2018 31.12.2016 31.12.2020 31.12.2020 31.12.2020 31.12.2019 31.12.2019 Unit Supplementary p/st p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0 2 0 % 0 )
1
or more,
3
)
1 mobiles ( ceramic elements, with: mm), 1 (+/– mm 166 of length — a — of 70 1 mm), mm (+/– a diameter cm 280 of capacity internal — an conditioning systems mm), 1 (+/– mm 291 of length — a — of 32 1 mm), mm (+/– a diameter — a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm, mm 0,06 than more not of diameter particle solid — a of a kind air-conditioning systems used in car equipment of a kind air-conditioning systems used in car — of 17 absorption g rate a water or more, and — of not amount more than 0,9 purity expressed by of impurities mg/dm permissible an internal Description ( conditioning compressors of air machines of motor vehicles Drive part, for Evaporator made of aluminium for use in with: the manufacture of air conditioning machines for auto elements ceramic and a connection block, containing polyamide and with dryer receiver removable Aluminium arc-welded polyamide with dryer receiver removable arc-welded air- a kind used car in of aluminium block with extruded, bent connector lines, Flame-soldered Aluminium Evaporator composed of aluminium fins and of the kind a copper coil used in refrigeration Condenser composed of two copper tubes concentric of the kind equipment used in refrigeration 40 20 30 40 50 50 60 TARIC CN code ex 8415 90 00 ex 8418 99 10 ex 8415 90 00 ex 8415 90 00 ex 8415 90 00 ex 8418 99 10 ex 8414 90 00
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 182
review mandatory End date for End date
31.12.2019 31.12.2016 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2017 31.12.2018 Unit Supplementary p/st p/st p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
)
1
) 1
)
1 Place (SIP) activities; Place (SIP) incorporating modules for sterilization and of these elements: sanitization incorporating modules sterilization for system — ultrafiltration system filtration — carbon system softener — water laboratory for use in a biopharmaceutical products comprising any of the biopharmaceutical of the manufacture use in Equipment for following whether or not with associated vessels or tanks: in Sterilise and (CIP) Process unit; in — Ultrafiltration-diafiltration Clean for equipment monitoring and testing control, — Automated ( tanks and vessels — Process embedded walls, in a block of artificial with permeable material plastic of artificial hollow fibres end, other the at material plastic artificial block of and passing through a one end at material plastic whether or not housed in a cylinder of an whether or not perforated, enclosed bundle within a container, hollow of a permeable fibres of than of not more 700 diameter and a mm than 3 but not more 300 or more length of mm overall 500 mm ink-jet of manufacture the moulding machines, for injection than other Machines and apparatus, ( printer cartridges ml, equipped with a nozzle, of kind spraying used of mechanical appliances for liquids as a part ( in heading of vehicles brakes and 8427 mast mounting use in the manufacture arms for wave design 2,54 of 9 fins per of vehicles heading length for use in the manufacture cm of core 8427 ( Description whether or not the following elements, system comprising one of or more pre-treatment Water square core open an and by osmosis, consisting of water of a bundle reverse of of equipment, the purification Parts for structure support steel of gases from gas mixtures, consisting Components or purification for the separation of separators integral with radiator, tank but than 600 with a content of 50 ml or more not more poly(ethylene terephthalate), Containers of plastic core, wheel hubs, reduction gears, crown wheel, drive shafts, Drive axle assembly containing differential, Aluminium 20 10 10 75 30 20 91 93 30 30 40 TARIC CN code ex 8479 82 00 ex 8422 30 00 ex 8479 89 97 ex 8421 99 00 ex 8421 99 00 ex 8479 89 97 ex 8424 90 00 ex 8431 20 00 ex 8431 20 00 ex 8421 21 00 *ex 8421 29 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 183
review mandatory End date for End date
31.12.2020 31.12.2018 31.12.2019 31.12.2018 31.12.2018 Unit Supplementary p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
)
1
) 1
— a single-phase AC motor, AC single-phase — a gearing, epicyclic — an blade cutter — a containing: not or and whether capacitor, — a — with a threaded bolt fitted a part ( of garden shredders for use in the manufacture of 550 000 mm or more and diameter mm or more an external length of 3 with: circuits, connecting Mechanical switches for electrical — 14,4 voltage of a V or more but not than 42 V, — of 10 but an amperage A or more not more than 42 A, ( within heading of machines falling for use 8467 in the manufacture basket/bushing with heater assembly: Melter Glass Filament heated — electrically opening — with — of platinum/rhodium alloy of tips (holes) with a multiplicity glass molten condition and batches glass melt to — used fibres continuous into drawing — for Description Part containing: Part shells, produced tubes, of a Suction-roll casting, not by in the form of alloy-steel drilled, centrifugal membranes of heading 3921 of plastic modification surface casting or for Machines for 10 10 35 10 10 10 10 TARIC CN code ex 8467 99 00 ex 8475 29 00 ex 8436 99 00 ex 8439 99 00 ex 8536 50 11 ex 8514 10 80 ex 8477 80 99
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 184
review mandatory End date for End date
31.12.2019 31.12.2020 31.12.2019 31.12.2019 31.12.2020 Unit Supplementary p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
) 1
litres vessel pressure system, 000 amps) Current (16 — having interior surfaces of type 316L austenitic stainless steel stainless austenitic 316L type of surfaces interior — having — 000 000 or litres 15 000 with a litres, 10 process 000 capacity of 50 5 litres, litres, 500 litres, 3 — media hold system and/or a dedicated paired whether or not combined with a ‘clean-in-process’ for ion batteries of lithium manufacture the for production line a Machinery, being components of ( production such a of line the construction for motor vehicles, passenger electric capability and fix them in position with a two part cure epoxy ( batteries AA and/or AAA alkaline of the manufacture for closing cap) rating, pressure tonne 000 16 a — with 1mm), (± Bolster diameter 100mm 1 a — with 1mm), (± cylinder main 400mm 1 a — with and accumulator hydraulic pressure high pump multiple frame, link floating and Fixed a — with systems, electrical and piping for connections and arrangement manipulator arm double a — with and tonnes), 10 (± tonnes 310 weight total a — with 500 degrees centigrade using Low 000 Frequency atmospheres at Alternating 1 — creating 30 Description Bioreactor for biopharmaceutical cell culture cell biopharmaceutical for negative Bioreactor the and conductor (anode component assembled sub Press’): a (‘Link of Press production Compression the Materials for axis alignment assembly in five lenses into a camera align and attach Machine to accurately Hard Machinery Pressure High 50 80 15 70 80 85 TARIC
CN code ex 8479 90 80 ex 8479 89 97 ex 8479 89 97 *ex 8479 89 97 *ex 8479 89 97 *ex 8479 89 97 ______
M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 185
review mandatory End date for End date
31.12.2019 31.12.2018 31.12.2017 31.12.2018 31.12.2016 31.12.2016 31.12.2019 Unit Supplementary p/st p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
)
1
,
2 ,
2
)
1 )
1 14 MPa, — a minimum withstanding pressure of 45 kgf/cm 45 of pressure withstanding minimum — a for use in the manufacture of outdoor air conditioning units ( of outdoor conditioning for use in the manufacture air units — an opening pressure of not more than 800 kPa, 800 than more not of pressure opening — an mm 37 than more not diameter external — an engines flow in fuel injection — a solenoid pilot valve — valve body a brass and including copper connections valve slider with a working pressure up to 4,5 MPa with: line gas on the kgf/cm 30 of pressure enclosing minimum — a plunger, core — a plunger, sealing — a coil, solenoid Hz 50/60 AC V V-240 220 — a MPa, 4,3 to up pressure working — a housing — a for use in of outdoor the manufacture conditioning air for directing the flow of refrigerant, units ( bearings: Ball and cylindrical — of 28 but mm or more not more than 140 with an outside diameter mm, — of more than 150 stress with an operational thermal °C at a working of not pressure more than of machinery for the protection in and for the manufacture nuclear power control of nuclear reactors plants ( Description Steel check (non-return) valves with: valves bar of: (non-return) 875 consisting check of refrigerants, Steel pressure for a valve withstand reversing can Air control valve, consisting of a stepping motor and a valve pintle, for the of regulation idle air Four-way that device valve Solenoid of: consisting way valve, consisting valve a combination of two way and valve on a three Service the liquid line valve, way Four 10 10 10 91 10 60 20 50 60 TARIC CN code ex 8482 10 10 ex 8482 10 90 ex 8481 80 59 ex 8481 80 69 ex 8481 80 79 ex 8481 80 99 ex 8481 80 99 ex 8482 50 00 ex 8481 30 91
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 186
review mandatory End date for End date
31.12.2019 31.12.2017 31.12.2016 31.12.2018 Unit Supplementary p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
) 1 Ball bearings: — of 3 mm or more, diameter with an internal mm, 100 than more not of diameter external an — with mm, 40 than more not of width a — with duster, a with equipped not or — whether for use in the manufacture of belt drive steering systems of power motor, electric steering systems ( gears or steering 1561, EN DIN standard with complying iron cast grey precision-cast — of chambers, oil — with bearings, — without — of 50 mm or more, but not more than 250 with a diameter mm, — with a height of 40 mm or more, but than 150 not more mm, connectors and chambers water with not or — whether 000 Nm, — torque of 50 Nm or more but not than 7 a rated more — of 1:50 but standard ratios or more not more than 1:270, — minute, than one arc not more motion of lost %, 80 than more of efficiency — an of a kind used in robot arms — torque of 25 Nm or more, but not more than 70 Nm, a rated — of 1:12,7 standard gear ratios or more, but than 1:64,3 not more Description housing: bearing with: with: Cylindrical tools type power gear hand-held cycloid driving of in set used Gear kind a of gearing, Epicyclic 30 20 40 50 60 TARIC
CN code ex 8483 30 38 ex 8482 10 90 ex 8483 40 29 ex 8483 40 29 *ex 8482 10 ______
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 187
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2020 31.12.2020 31.12.2018 31.12.2020 Unit Supplementary p/st p/st p/st - - -
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
)
1
)
1
lawnmowers with a seat of subheading 8433 11 51 ( ( 51 11 lawnmowers with a seat of subheading 8433 of self-propelled manufacture gears, 3 than more — not and system, deceleration automatic — an system, reversal power — a ( of goods for use in the manufacture of heading 8427 0,3), (+/– mm 24 of axle without length — a 0,3), (+/– mm 49,3 of diameter — a — voltage of 220 V a rated AC or more but not than 240 V AC, — frequency of 50 but a rated Hz or more not more than 60 Hz, W, 4 than more not of power input — an — speed of 4 rpm or more but not than 4,8 a rotation rpm, kgf/cm 10 than more not of torque output — an %) rpm, a supply voltage of 1,5 V or 3 V 420 (± 15 %) rpm or 5 (± 15 — a DC motor with an output of 10 W or more but not than 15 W, mechanism, gear integrated — an Description Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled self-propelled of manufacture the in use for axle, wheel with differential a 260 having 2 box, of Gear speed with: rated gearbox, Hydrostatic speed changer, having a hydro with wheel axle, for use in the pump and a differential a Transmission mm, 25,4 than more not of Synchronous control mechanism with flow a dishwasher with a water motor for diameter external an with brushless, motor, with: DC actuator, turbocharger Electric 20 20 80 20 54 55 TARIC CN code ex 8501 10 ex 8501 10 99 ex 8501 10 99 ex 8483 40 59 ex 8483 40 51 *ex 8483 40 90
M5 M4 M5 M4 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 188
review mandatory End date for End date
31.12.2020 31.12.2017 31.12.2018 31.12.2020 Unit Supplementary - - - -
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
1
6 500 rpm when not loaded — with a rotor speed of not more than 6 500 when rpm not loaded; — speed of not more than 6 rotor with a 0,1); (+/– V 12,0 of voltage rated a — with — range of – 40 °C temperature or more, but of a specified than not more + 165 °C; pinion; connecting a without or — with connector engine an without or — with — 000 rpm loaded and not more than 500 but rpm or more not more than 5 with a rotor speed of 3 — with a power supply voltage of 100 but V or more not more than 240 V ( fryers of electric for use in the manufacture °) 0,5 (± ° 7,5 of step of angle — an winding, two-phase — a °C 105 — voltage of 9 V or more, but + not more than 16,0 a rated V to °C 40 - least at covering range temperature specified a — of pinion connecting without or — with connector drive motor without or — with winding multiple-phase — a — 28 of mm or more but not than 35 mm, diameter an external rpm, 000 12 than more not of speed rated — a — a power supply but not than 27 voltage of 8 V or more more V — of 250 at 160 N or more a (pulling)force °C ambient temperature, elevated — of 250 force in a (pulling) N or more each position of its stroke, — stroke of 15 mm or more but not than 20 mm, an effective interface diagnostics on-board an without or — with Description DC motor: DC motor: DC with motor, stepping DC with motor DC excited Permanently 57 60 70 75 TARIC CN code ex 8501 10 99 ex 8501 10 99 ex 8501 10 99 *ex 8501 10 99
M4 M5 ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 189
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2017 31.12.2016 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1 (± 0,5°),
o with a worm, of a specified temperature range covering at least - 20 range covering °C at least to + temperature with a worm, 70 of a specified °C 7,5 of step of angle — an two phase a 68 mm, × 22 mm not exceed which do of dimensions exterior the coupling bracket W 5 than more not output of an winding and 15 %) rpm or 6 800 (± 15 %) rpm, a supply voltage of 2 V or 8 V mm, 100 than more not but more, or mm 80 of diameter external — an V, 12 of voltage supply — a — an output 20 300 at °C of W or more, but not more than 750 W, — a torque 20 °C of 2,00 Nm or more, but not more than 7,00 Nm, 100 — rpm, speed at 20 °C a rated of 600 rpm or more, but not more than 3 — type, type or Hall effect angle position sensor of resolver with or without the rotor of the kind cars used systems for in power steering more than 115 nominal torque of 2,23 mm, a 1,0 an output than 120 Nm (± Nm), of of more W but equipped 12 V of voltage supply a at 350 rpm) (± 550 rpm 1 with calculated 520 W, than more not power steering use with an electric for effect, using with sensors the Hall circuit with electronic ( control module steering motor) (power — a pull-out torque at 25 °C of 25 mNm or more, 500 pps or more, — of 1 a pull-out pulse rate and winding, two-phase — a — voltage of 10,5 a rated V or more, but not more than 16,0 V Description DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped not or whether winding, three-phase (± a 500 with 1 rotor of internal speed an rated and a brushes mm, with 29 motor with: than DC motor, more stepping not not DC of but diameter more, external or an mm with 85 brushless, of DC stepping motor, with an angle of step 18 ° or more, a holding torque of 0,5 mNm or more, a motor, with: diameter DC brushless, external motors, an DC winding, three-phase a with brushless, motor, DC 79 80 81 82 25 30 TARIC CN code ex 8501 10 99 ex 8501 10 99 ex 8501 10 99 ex 8501 31 00 ex 8501 10 99 *ex 8501 31 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 190
review mandatory End date for End date
31.12.2020 31.12.2019 31.12.2018 Unit Supplementary - - -
duty 0 % 0 % 0 % Rate of autonomous
maximum 6 bore holes) aluminium diecast housing compound aluminium diecast with a sealing maximum 6 bore holes) (groove with an O-ring and grease), Automotive-ready, brushless and permanently excited direct current motor with: current direct and excited Automotive-ready, brushless permanently rpm, 000 4 than more not of speed specified V), — a 12 (at kW 1,3 than more not but W, 400 of output minimum — a — of 90 mm or more, but diameter not more than 150 a flange mm, — a maximum length of 190 mm, measured from the beginning of the shaft to the outer ending, — a housing to the outer ending, not more than 150 the flange length of from mm, measured — a two-piece (basic housing including components electric and flange with minimum 2 and — design with single T-tooth and coil windings a stator single in 12/8 topology and magnets — surface winding, multiple-phase — a — 30 of mm or more but not than 80 mm, diameter an external rpm, 000 15 than more not of speed rated — a — an output of 45 but W or more not more than 300 W and — a supply but not than 25 voltage of 9 V or more more V mm, 110 than more not but more, or mm 90 of diameter external — an rpm, 680 3 than more not of speed rated — a 300 80 °C, — rpm and at an output of 600 W or more but not than 740 2 W at V, 12 of voltage supply — a Nm, 5,67 than more not of torque — a sensor, position rotor — a and relay, star-point electronic — an module control steering power electric an with use — for Description with motor DC excited Permanently with: brushless, motors, DC 35 70 40 45 TARIC CN code ex 8501 31 00 ex 8501 32 00 ex 8501 31 00 ex 8501 31 00
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 191
review mandatory End date for End date
31.12.2018 31.12.2016 31.12.2018 31.12.2019 31.12.2016 Unit Supplementary - - - - -
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
) 1
)
1 — 27,5 of but not more than 45 mm or more, diameter mm, an external 200 rpm, 000 more, but not more than 23 rpm or — speed of 11 rated a — supply a rated voltage of 3,6 V or more, but not more than 230 V, W, 529 than more not of power output — an A, 3,1 than more not of current load free — a % or more, — of 54 a maximum efficiency for driving hand-held power tools — an input voltage of 264 V or more, but not than 391 more V, — of 81 2,5 mm an external diameter (± mm) or more, but not more than 150 0,8 mm (± mm), W, 125 than more not of power output — an insulation, winding class B or — E ( of indoor for use in the manufacture conditioning or outdoor air machines units of split-type Fuel cell module containing at least polymer membrane fuel cells whether electrolyte or not in a housing of motor vehicle propulsion cooling system, for use in the manufacture with an integrated systems ( Traction motor, with: — a torque output of 200 but than Nm or more not more 300 Nm — a power output of 50 but kW or more not more than 100 kW rpm 500 12 than more not of speed rated — a ( vehicles of electric for use in the manufacture motor vehicles, with an output not than 315 drive for of more kW, with: Electric — an AC or DC motor whether or not with transmission, electronics — power Description DC motor with commutator, with with: commutator, (CCW), with clockwise motor counter DC revolve can that motor DC Brushless 50 60 30 50 55 15 10 55 60 TARIC
CN code ex 8501 33 00 ex 8501 40 80 ex 8501 53 50 ex 8501 33 00 ex 8501 31 00 ex 8501 33 00 ex 8501 31 00 *ex 8501 32 00 *ex 8501 32 00 ______
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 192
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2016 31.12.2016 31.12.2019 31.12.2017 31.12.2016 31.12.2020 31.12.2017 Unit Supplementary - - - p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 m m μ μ
0 % 0
AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000 AC synchronous a maximum and speed brake for servo motor with resolver of not more than 6 rpm, with: — an output of 340 W or more but not than 7,4 kW, — of dimensions of not more than 180 a flange mm × 180 mm, and — of not more than 271 end mm of resolver flange to extreme a length from cleaner) and reformer (desulphurizer, generator Hydrogen — a and stack, cell fuel PEM — a Inverter — an in a heating appliance for use as a part cells, fuel acid phosphoric least at of — consisting treatment, gas and management water integrated with housing a — in supply energy stationary permanent, — for Rotor, provided at the innerside with one rings whether or not or two magnetic in a incorporated steel ring manufacture of fuel cells in heading 8501 Description Fuel cell module, AC generator with an output of 7,5 kVA or less, consisting of: consisting less, or kVA 7,5 of output an with generator AC module, cell Fuel system cell Fuel steering power electrical of motors than 16 mm of not more diameter motor, having an external an electric of Stamped collector brushless for with a roundness power of 50 steering tolerance for brushless motor of electrical Stator resolver of 50 with a roundness power steering tolerance brushless motor of electrical Rotor for Transmitter or sheets, with a width of not more than 150 membrane, in rolls cm, of a kind Fuel cell used for 30 31 50 32 35 30 31 33 34 35 40 TARIC CN code ex 8501 51 00 ex 8503 00 91 ex 8501 62 00 ex 8503 00 99 ex 8503 00 99 ex 8503 00 99 ex 8503 00 99 ex 8503 00 99 ex 8503 00 99 ex 8501 52 20 *ex 8501 61 20
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 193
review mandatory End date for End date
31.12.2018 31.12.2019 31.12.2017 31.12.2017 31.12.2018 31.12.2017 Unit Supplementary p/st p/st - - - p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
) 1
)
1
) 1
mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, or operation dimmed in V) 4 (± V 30 of voltage input an mode, with in dimmed operation mode, %) or of 160 15 V (± dimmed operation mode in %) 20 60 V (± 120 versions V for 45-70 Hz — an internal diameter of 206,6 mm (± 0,5) (± mm 206,6 of diameter internal — an and 0,2), (± mm 265,0 of diameter external — an 0,3) (± mm 41,00 of width — a of a kind equipped used of washing or dryer in the manufacture with direct machine, washer-dryer drive drums 0,25 more than 2,5 mm (± mm) ( manufacture of converters static — of 1 kVA with a capacity or less cables, or plugs — without ( of set top boxes use in the manufacture for internal and TVs components: connectors output two — with parallel in useable and available are which connectors input two — with mode operation dimmed and bright between switch to — able %) in bright operation % -15 %) or 42 V (+ 25 % -15 — with an input voltage of 40 V (+ 25 mode, with an input voltage operation in bright %) — % -15 230 20 of (+ an input voltage V with — %) in bright operation mode, with an input voltage of % -35 with an input voltage of 120 V (15 % of its nominal value within 20 ms — reaching 80 with an input current — 42 V and 230 V, and than 65 Hz for but not more more, 45 Hz or of an input frequency with input % of the current — overshoot with an maximum of not more than 250 inrush current Description Engine cover for electronic belt drive steering system of galvanized steel with a thickness of not of the thickness in a use with for steel kVA galvanized 1 with: of than motor, system more brushless steering not for drive of Stator belt capacity electronic handling for power cover a Engine having transformers, ( in LCD modules of inverters use in the manufacture for Transformer Switching transformers: Electrical and passive active and other circuit bridge rectifier a board equipped with circuit Printed 50 60 20 30 40 40 TARIC CN code ex 8503 00 99 ex 8504 31 80 ex 8504 31 80 ex 8504 31 80 ex 8504 40 82 ex 8503 00 99
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 194
review mandatory End date for End date
31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
)
1
) 1 (Metal Oxide or Semiconductor Transistor) IGBT Field-Effect (Insulated Gate Bi-polar Transis tors)) and internal drives, and but not more than 800 V DC vehicles ( ovens subheading of microwave of housing, contained use in the manufacture in a for 8516 50 00 ( transistors, — power circuits, — integrated — whether or not containing diodes and with or without thermistors, V, 600 than more not of voltage operating — an MOSFET (whether switches power two containing each outputs electrical three than more — not A 15,7 than more not of rating current square) mean (root rms — a — one or six 3-phase motor outputs with maximum 3 x 32 A, — power input of 220 than 480 main but not more a V AC V AC, or 280 or more, V DC or more, DC, V 24 of input power logic — a interface, communication EtherCat — an — and a dimension of 150 x 140 than 335 x 120 x 430 but not more mm or more, x 179 mm — overshoot of not with a period of the inrush current than 100 more ms % of the input current — ms undershoot with an input than 50 current of not less 20 than more not of undershoot current inrush the of period a — with current output ms presettable 50 a within — with value pre-set nominal its of % 90 reaching current output an — with — of the input voltage removal within 30 ms after reaching zero with an output current — with status in an defined failure case of no-load or too-high function) load (end-of-life Description Static converter comprising a power switch with insulated-gate bipolar transistors (IGBTs), transistors bipolar insulated-gate with switch power a of electric use in the manufacture motor control for use in traction DC for to AC inverter comprising converter comprising: Direct current to direct current converter Static modules power Semiconductor with: robot industrial for unit Drive 30 20 30 40 50 TARIC CN code ex 8504 40 88 ex 8504 40 90 ex 8504 40 90 ex 8504 40 90 ex 8504 40 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 195
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2020 Unit Supplementary p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
1
0 % 0
) 1
(± 20 %), 20 (± μΗ current of more than 15,7 A, — power transistors, — power circuits, — integrated — whether or not containing diodes and with or without thermistors, configuration, circuit — a — either containing a direct drive stage with an operating voltage of more than 600 V, — voltage of not more than 600 stage with an operating V and rms drive a or containing a direct — modules or including correction one or more power factor with W 100 than more not of power rated — a Hz — 440 an input voltage of 80 V or more, but not more than 305 than V more not but more, or Hz 47 of frequency input certified — an output(s) voltage constant more or — one — range of - 40 °C or more, an operating temperature but not more than + 85 °C, circuit printed a to mounting for — pins converter DC to DC — a — of not not more than 7 kW of a capacity a charger functions — switching ( vehicles of electric for use in the manufacture 4,7 of inductance — an — a DC resistance of not more than 0,1 Ohms, 0,1 than more not of resistance DC — a — of 100 500 MOhms an insulation resistance or more at V (DC) ( of LCD for use in the manufacture and LED module power boards Description Transfer moulded semiconductor power module comprising: module power semiconductor moulded Transfer mH Module for converting alternating current into direct current and direct current into direct current 62 than more containing: not converter of Power inductance an with with: Inductor choke Coil 60 70 80 20 40 TARIC CN code ex 8504 40 90 ex 8504 40 90 ex 8504 50 95 ex 8504 40 90 *ex 8504 50 95
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 196
review mandatory End date for End date
31.12.2017 31.12.2018 31.12.2019 31.12.2019 31.12.2018 31.12.2018 31.12.2017 Unit Supplementary p/st p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
0 % 0
) 1
0 % 0
electric and electronic components, reverse direction) — a power consumption of not more than 6 W, 6 than more not of consumption power — a and ohms, M 100 than more of resistance insulation — an — hole of 11,4 mm or more, an insert but not more than 11,8 mm — being a power electronic circuit mounted on the PCB, equipped with SGCT thyristor and 500 V — in both (conducting directions and the — having an ability to block the voltage - 6 and inverters) (rectifiers of a kind converters used in medium voltagestatic with rounded rectangle mm, 90 than more not of length — a and mm, 90 than more not of width — a mm, 55 than more not of height — a not than 90mm, of more whether or not containing with a diameter or in the shape a hole of a disc in the centre having undergone inorganic passivation coating) using (inorganic zinc phosphate for the industrial ( of products in motor or sensory applications manufacture Description Reactor cores for use in a High Voltage Direct Current thyristor converter thyristor Current Direct yokes with Voltage deflection coil driver: High for Solenoid gate a than integrated in other mT) with use cores, 15 Thyristor) for Ferrite (± Gate-Commutated cores mT (Symmetric Reactor 455 SGCT of Thyristor remanence a having magnet Permanent Permanent magnets consisting of an alloy of neodymium, iron and boron, in the shape either of a neodymium, and magnets of an alloy either iron and Permanent boron, coated cobalt or samarium 50 10 20 20 31 33 35 TARIC CN code ex 8504 90 11 ex 8504 90 11 ex 8504 90 99 ex 8505 11 00 ex 8505 11 00 ex 8505 11 00 ex 8504 50 95
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 197
review mandatory End date for End date
31.12.2019 31.12.2017 31.12.2020 31.12.2017 Unit Supplementary p/st p/st p/st -
duty 0 % 0 % 0 % 0 % Rate of autonomous
with: — consisting of at least neodymium, praseodym, iron, boron, dysprosium, aluminium and cobalt, and aluminium dysprosium, boron, iron, praseodym, neodymium, least at of — consisting 0,1) (- mm 9,2 of width a — with — with a length of 20 mm (+ 0,1) or 30 mm (+ 0,1) of a kind pumps of fuel used the manufacture on rotors for dimensions: boron, with and neodymium, iron — a length of 15 mm or more but not than 52 mm, — a width of 5 mm or more but not than 42 mm, automation industrial servomotors for of a kind of electric to be used in the manufacture and cobalt with of an alloy samarium Flat bars mm); 0,05 (± mm 30,4 of length — a mm); 0,15 (± mm 12,5 of width — a — a thickness of 6,9 mm (± 0,05 in mm), or composed the shape of of a quarter sleeves ferrites mm); 0,75 (± mm 46 of length — a mm), 0,2 (± mm 29,7 of width — a and starters car kind used in a of magnetisation, magnets after permanent become intended to cars devices extending range of electric the drive mm, 45 than more not of diameter — a mm, 45 than more not of height — a magnetisation of a kind of permanent magnets after used in the manufacture Description A quarter sleeve, intended to become permanent magnet after magnetisation, after magnet permanent containing become magnetisation, to after intended magnets sleeve, permanent quarter become A to intended shaped, specifically Bars Rings, tubes, bushings made from an alloy of neodymium, or collars and iron boron, with 55 40 45 50 60 TARIC CN code ex 8505 11 00 ex 8505 19 90 ex 8505 11 00 ex 8505 11 00 ex 8505 11 00
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 198
review mandatory End date for End date
31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary - - - p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
)
1 magnetisation is intended to become a permanent magnet centre, the in hole a containing not or — whether mm, 90 than more not of diameter a — with of a kind loudspeakers used in car magnetisation, containing neodymium, iron and boron, with dimensions of: — a length of 9 mm or more but not than 105 mm, — a width of 5 mm or more but not than 105 mm, — a height of 2 mm or more but not than 55 mm with a magnetisation intended magnets after to become permanent centre containing a hole in the remanence between245 mT and 470 mT ( motor vehicles plunger — a 0,1), (± mm 12,9 of diameter — a 0,1), (± mm 20,5 of plunger without height — a and connector, with cable electric — an housing metal in a cylindrical ( within of products heading falling for use 8517 in the manufacture Description neodymium, Disc consisting of an alloy iron and boron, after covered with nickel or zinc, that intended in square or rectangle, the form of a to become triangle, permanent magnets after Articles with: of not more than 120 mm, diameter with a disc the shape of a in ferrite of agglomerated Articles valve, electromagnetic an conditioning machines of of compressors air use in the manufacture clutch, for Electromagnetic for Coil 0,08 A, DC of nominal a at 24 V of supply voltage nominal a at plunger, operating a Solenoid with 70 80 30 30 30 91 TARIC CN code ex 8505 11 00 ex 8505 19 90 ex 8505 20 00 ex 8505 90 20 ex 8505 90 20 ex 8505 11 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 199
review mandatory End date for End date
31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2020 Unit Supplementary ------
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
) 1
) 1 flooded battery during the first 5 seconds of charge, 5 seconds of first during the flooded battery — of 14,0 but not than 26,0 mm or more a diameter more mm; — a length of 25 mm or more but not than 51 mm; V; 3,6 than more not but more, or V 1,5 of voltage — a — of 0,80 a capacity Ah or more, but not more than 5,00 Ah or remote meters devices, electronic and medical of telemetry for use in the manufacture controls ( 2,8 V than not more of voltage and a with not more than 32 socket), connections and incorporating a control circuit (battery-buffered 28 mm × 45 mm × 15 mm and of not less than 1,05 a capacity Ah Ah, 32 more not of capacity nominal — a mm, 205 than more not of length — a and mm 130 than more not of width — a mm 190 than more not of height — a ( of heading 8711 of articles for use in the manufacture of an equivalent conventional % or more of the level of 200 capacity acceptance — a charge electrolyte, liquid — a Description Unit consisting of not more than 2 lithium batteries embedded in a socket for integrated circuits integrated for socket with: a cells in primary embedded cylindrical batteries Lithium lithium 2 than more not of consisting 45 mm × 23 mm × 9 mm which do not exceed dimensions of the battery cell iodine single Lithium Unit with modules, of dimensions vanadium of not more than battery oxide single cell or lithium-silver Lithium-iodine or accumulators Lead-acid with: battery, starter acid Lead 10 10 20 30 30 80 TARIC
CN code ex 8506 50 10 ex 8506 50 90 ex 8506 50 90 ex 8506 50 90 *ex 8507 10 20 *ex 8507 10 20 ______
M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 200
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2020 Unit Supplementary - - - - -
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
) 1
) )
1 1
) 1 diameter of 14,5 mm (± 1mm), having a nominal capacity of 1 000 mAh or more, for use in the use in 000 for mAh or more, 1 of 1mm), having nominal capacity of 14,5 a mm (± diameter ( batteries manufacture of rechargeable or module, Rectangular accumulator with a length of not more than 69 mm, a width of not more rechargeable of manufacture the use in for 12 mm, than more not of thickness and a than 36 mm batteries ( ( batteries manufacture of rechargeable — of 8,8 a nominal capacity Ah or more, but not more than 18 Ah, — a nominal voltage of 36 V or more, but than 48 not more V, — a power of 300 Wh or more, but not more than 648 Wh, ( bicycles of electric for use in the manufacture V, 12 of voltage rated — a — a length of 350 mm or more but not than 355 mm, 180 mm, than more not but — more or 170 mm of width a — a height of 180 mm or more but not than 195 mm, — weighing 10 kg or more but not than 15 — of 60 a nominal charge Ah or more, but not than 80 more Ah for use in the manufacture of passenger cars and light commercial vehicles employing of passenger and for use in cars light commercial the manufacture high regen erative alternator controls ( or start/stop systems with high regenerative alternator controls Description or module, accumulator Cylindrical nickel-cadmium with a length of 65,3 mm (± 1,5 mm) and a with: cells, with: secondary modules lithium-ion or of not more than 14,5 or module, the a diameter mm, nickel-hydride accumulator of for Cylindrical rechargeable lithium-ion-accumulators four Cylindrical of consisting accumulator, starter Lithium-ion 20 20 30 30 15 17 TARIC CN code ex 8507 50 00 ex 8507 30 20 ex 8507 60 00 ex 8507 50 00 *ex 8507 60 00 *ex 8507 60 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 201
review mandatory End date for End date
31.12.2020 31.12.2017 31.12.2020 31.12.2019 31.12.2020 Unit Supplementary - - - - -
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
) 1
)
1
)
1 — of 72 a nominal Ah capacity or more, but not more than 100 Ah, V 3,2 of voltage nominal — a — 3,4 kg than more but not more, 1,9 kg of weight a ( vehicle batteries hybrid of rechargeable electric for use in the manufacture — a width of 352,5 1 or 367,1 mm (± mm) 1mm) mm (± — a depth of 300 2 mm) or 272,6 1 mm (± mm (± mm) — a height of 268,9 1,4 mm (± or 229,5 mm) mm (± 1mm) — a weight of 45,9 kg or 46,3 kg and Ah, 75 of rating — a V 60 of voltage nominal — a — of 10 a nominal Ah capacity or more, but not more than 20 Ah; — a nominal voltage of 12,8 0,05) V (± or more, but not than 15,2 more 0,05); V (± — a power of 128 Wh or more, but not more than 256 Wh, ( bicycle drives of electric for use in the manufacture 200 of mAh or more, for use in the manufacture 17,2 mm or more, having of 1 a nominal capacity ( rechargeable batteries — a length of 150 mm or more, but not more than 300 mm 000 mm — than 1 700 more, but not more width of a mm or Description Rectangular modules for incorporation in lithium-ion rechargeable batteries, with: with: batteries, module rechargeable or lithium-ion Lithium-ion-accumulator in incorporation for modules Rectangular with: accumulator cylindrical Lithium-ion with: accumulator or module, Cylindrical lithium-ion with a length of 63 mm or more and of a diameter accumulator, Lithium-ion 23 25 27 30 33 TARIC CN code ex 8507 60 00 ex 8507 60 00 *ex 8507 60 00 *ex 8507 60 00 *ex 8507 60 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 202
review mandatory End date for End date
31.12.2020 31.12.2020 31.12.2019 31.12.2020 Unit Supplementary - - - -
duty 0 % 0 % 0 % 0 % Rate of autonomous
) 1
) 1
— a length of 1 200 mm or more, but not more than 2 000 mm 200 mm or more, but than not more 2 — a length of 1 300 mm — than 1 800 more, but not more width of a mm or 800 mm 000 mm or more, but than not more 2 — a height of 2 000 kg 800 kg or more, but not more than 3 — a weight of 1 200 Ah 800 Ah but than 7 or more not more — of 2 a nominal capacity mm, 4,15 than more not of thickness — a mm, 245,15 than more not of width — a mm, 90,15 than more not of length — a 000 mAh, 000 mAh but not than 10 or more more — of 1 a nominal capacity g 250 than more not of weight — a for use in the manufacture of products falling within subheading 8471 30 00 ( with: Rechargeable Lithium-ion Polymer Battery mAh, 060 1 of capacity nominal — a — a nominal voltage of 7,4 V voltage at 0,2 (average C discharge), 0,05), (± V 8,4 of voltage charging — a 0,1), ((± mm 86,4 of length — a 0,1), (± mm 45 of width — a 0,1), (± mm 11 of height — a ( of cash registers for use in the manufacture mm, 4,15 than more not of thickness — a mm, 75,15 than more not of width — a — a height of 1 100 mm or more, but not more than 1 500 mm 100 mm or more, but than not more 1 — a height of 1 — a weight of 75 kg or more, but not more than 160 kg — than 150 not less Ah than 500 and not a nominal capacity more Ah Description Lithium-ion accumulator, with: accumulator, Lithium-ion with accumulators, Lithium-ion with accumulators, Lithium-ion 45 20 37 43 47 TARIC CN code ex 8507 60 00 ex 8507 80 00 *ex 8507 60 00 *ex 8507 60 00 *ex 8507 60 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 203
review mandatory End date for End date
31.12.2017 31.12.2017 31.12.2017 Unit Supplementary - - -
duty 0 % 0 % 0 % Rate of autonomous
) 1
)
1
— a length of 298 mm or more, but not more than 408 mm, — a width of 33,5 mm or more, but than 209 not more mm, — a height of 138 mm or more, but not more than 228 mm, — a weight of 3,6 kg or more, but not more than 17 kg, and 158 — Wh a power of 458 Wh or more, but not more than 2 297 mm, 203 mm or more, but than not more 1 — a length of 1 — than 772 282 more, but not more width of a mm, mm or — a height of 792 mm or more, but not more than 839 mm, — a weight of 253 kg or more, but not than 293 more kg, — power of 22 kWh or 26 kWh, and — constituted of 24 or 48 modules — squeezed in the middle, to an ellipse a base similar — a length of 49 mm or more (not including terminals), — a width of 33,5 mm or more, more, or mm 9,9 of thickness — a — of 1,75 capacity Ah a rated or more, and V, 3,7 of voltage rated — a ( batteries of rechargeable for the manufacture — a length of not more than 150,15 mm, 150,15 than more not of length — a 000 mAh, 000 mAh but not than 10 or more more — of 1 a nominal capacity g, 150 than more not of weight — a for use in the manufacture of products falling within subheading 8517 12 00 ( Description with: accumulators of ion lithium electric Modules the assembly of batteries for with: form, module: or rechargeable accumulators electric of lithium-ion Batteries cylindrical in module or accumulator Lithium-ion 50 53 55 TARIC CN code ex 8507 60 00 ex 8507 60 00 *ex 8507 60 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 204
review mandatory End date for End date
31.12.2017 31.12.2020 31.12.2016 31.12.2017 Unit Supplementary - - - -
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
1
— some of the corners rounded off, rounded corners the of — some — a length of 76 mm or more (not including terminals), — a width of 54,5 mm or more, more, or mm 5,2 of thickness — a 100 mAh or more, and — of 3 capacity a rated V, 3,7 of voltage rated — a ( batteries of rechargeable for the manufacture 575 mm, 213 mm or more, but than not more 1 — a length of 1 200 mm, 1 than more not but — more or 245 mm of width a — a height of 265 mm or more, but not more than 755 mm, — a weight of 265 kg but or more not more than 294 kg, Ah, 66,6 of capacity nominal — a 48 modules of packs put up in — 3,8 VDC, 3,5 VDC to — 900 mAh, and to 300 mAh mm 14,5 to mm 10,0 of diameter — a 820 mm — a length of 700 mm or more, but not more than 2 660 mm — than 1 935 more, but not more width of a mm or — a height of 85 mm or more, but not more than 700 mm — a weight of 280 kg or more, but not than 700 more kg a power of not more than 130 kWh Description Lithium-ion accumulator or module, cuboid in shape, with: shape, in cuboid module, or accumulator Lithium-ion with: batteries, rechargeable Lithium-ion with cell ion lithium Cylindrical with: batteries, rechargeable Lithium-ion 57 60 65 71 TARIC
CN code ex 8507 60 00 ex 8507 60 00 *ex 8507 60 00 *ex 8507 60 00 ______
M5 M4 M5 M4 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 205
review mandatory End date for End date
31.12.2016 31.12.2016 31.12.2020 31.12.2020 Unit Supplementary - - - p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
1
)
1
— a metal casing, metal — a mm), 0,15 (± mm 173 of length — a mm), 0,1 (± mm 21 of width — a mm), 0,15 (± mm 91 of height — a and, V 3,3 of voltage nominal — a — of 21 a nominal capacity Ah or more casing, metal — a mm), 3 (± mm 171 of length — a mm), 1 (± mm 45,5 of width — a mm), 1 (± mm 115 of height — a and V, 3,75 of voltage nominal — a Ah 50 of capacity nominal — a — ( for use in for motor the manufacture of batteries vehicles rechargeable — of a length of 312 mm or more, but not more than 350 mm — of a width of 79,8 mm or more, but not than 225 more mm — of a height of 35 mm or more, but than 168 not more mm — 3,95 of a weight kg or more, but not more than 8,56 kg — of 66,6 with a rating Ah or more, but not more than 129 Ah mm), 5 (± mm 70 of width — a mm), 0,2 (± mm 0,4 of thickness — a mm, 55 than more not of length — a ( vehicle batteries of lithium-ion electric for use in the manufacture Description Rectangular lithium-ion-accumulator, with lithium-ion-accumulator, Rectangular with module, or lithium-ion-accumulator batteries: Rectangular rechargeable lithium-ion in incorporation for modules with: Rectangular foil, copper nickel-plated of plate Cut 75 80 85 70 TARIC CN code ex 8507 90 80 ex 8507 60 00 *ex 8507 60 00 *ex 8507 60 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 206
review mandatory End date for End date
31.12.2020 31.12.2020 31.12.2019 31.12.2019 Unit Supplementary p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
to a stored program, to a stored full) and/or filter and/or dust bag full capacity Printed circuit board without Printed circuit a housing for actuating and controlling vacuum cleaner brushes than 300 W not more an output of with motor powered by a cards Electronic circuit that: and card, controller motor the and other each to frequency radio or by wire connected — are — regulate the functioning (switching on or off and suction of capacity) vacuum according cleaners — display the functioning (suction that of the vacuum with indicators cleaner whether or not fitted igniter, — an bracket, mounting integrated an with assembly plug on coil — a housing, — a — a length of 90 mm or more but not than 200 5 mm), mm (± — 40 of - but °C than or more not more 130 an operating temperature °C, V 16 than more not but more, or V 10,5 of voltage — a than 14,4 operating voltage of 12 V or more, but not more kind V, of a used the manufacturing in of goods of Chapter 87 Description with: assembly coil integrated Igniter in a vehicle with an time, date and screen displaying status of safety features Information at least 10 20 96 98 30 20 TARIC
CN code ex 8537 10 99 ex 8512 20 00 ex 8537 10 99 ex 8511 30 00 *ex 8508 70 00 *ex 8508 70 00 ______
M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 207
review mandatory End date for End date
31.12.2020 31.12.2019 31.12.2019 31.12.2020 Unit Supplementary p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
1 — two LEDs, — two — by emitted the LEDs, the light lenses, focusing/scattering glass or plastic — by the LEDs, the light emitted redirecting reflectors in an aluminium housing mounted with an actuator at a bracket with a radiator, brackets, more or three with holder plastic — a bulbs, V 12 more or — one connector, — a cover, plastic — a cable connection a with not or — whether ( of goods for use in the manufacture of Chapter 87 voltage of 12 V, comprising: — coil, — magnet, membrane, — metal — connector, — holder of a kind of goods used in the manufacture of Chapter 87 principle, containing: board, circuit printed — a connector, — a holder metal a not or — whether of a kind of goods used in the manufacture of chapter 87 Description Lighting module, containing at least: least: a containing: at with surface, containing signal, inner module, sound galvanised Lighting specific a a with generating lamp for Fog piezo-mechanic principle the piezomechanical on on operating operating casing assembly plastic a Horn in system sensor parking for buzzer Warning 30 40 10 20 TARIC CN code ex 8512 20 00 ex 8512 30 90 ex 8512 30 90 *ex 8512 20 00
M5 M4 M5 M4 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 208
review mandatory End date for End date
31.12.2019 31.12.2019 31.12.2017 31.12.2019 31.12.2018 Unit Supplementary - p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
) 1
)
1
)
1 side of the mirror glass), mirror side of the Car door mirror heating foil: Car door mirror contacts, electrical two — with — with an on adhesive layer both and on sides (on holder of the mirror the side of plastic the sides both on film paper protective a — with least: Cavity assembly comprising at 000 W — with an input of not more than 240 V and an output 3 of not more than a transformer — an AC or DC with an output fan motor of not more than 42 watts — a housing steel made of stainless 00 and — 50 with or without a magnetron of microwave output than power of not more 900 W 80, 8516 20 products of headings of built-in 8514 manufacture for use in the 8516 60 80 ( 600 rpm, — with a motor having of 8 W at 4 fitted a power rating circuit, electronic an by — governed °C, 110 above temperatures ambient at — operating thermoregulator a with — fitted openings, central and side — containing aluminium, annealed — of °C 200 than more to resistant heat coating, ceramic a — with ( fryer of an for use electric in the manufacture manufacture of built-in products of headings 8514 20 80, 8516 50 00 and 8516 60 80 ( Description fryer: deep-fat the electric in an use of for sub-assembly choke Ventilation wavelength and element pot: sealing Inner capacitive a incorporating assembly Door 10 10 10 20 10 60 70 80 TARIC
CN code ex 8514 20 80 ex 8516 50 00 ex 8512 40 00 ex 8516 60 80 ex 8516 90 00 ex 8516 90 00 ex 8516 90 00 ex 8516 80 20 ______
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 209
review mandatory End date for End date
31.12.2018 31.12.2019 31.12.2019 31.12.2019 31.12.2017 31.12.2019 31.12.2020 Unit Supplementary - - p/st - - p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
)
1
— an impedance of 4 Ohm or more but not exceeding 16 Ohm, — nominal power of 2 W or more but not exceeding 20 W, and bracket, plastic without or — with wireless, or connector a with wired — electric ( and video of TV sets monitors mounted use in the manufacture for on a cabinet — an impedance of 3 Ohm or more, but than 16 not more Ohm, — a nominal power of 2 W or more, but not than 20 more W, and bracket, plastic without or — with — with connectors, fitted cable with or without electric of a kind used for TV sets and systems video as well home entertainment monitors manufacture excluding connecting points, do not exceed 5 mm × 6 8 amplification with dual and/or multi-channel functionality — disk in the form of a on coreplate, one a steel provided side with a cylinder magnet neodymium — a plate upper — an plate lower — a of a kind loudspeakers used in car loudspeakers car used in Description Loudspeaker of Loudspeaker of: Loudspeakers which, dimensions of Headphone housing aids, contained in a exterior hearing the and earphone for of: audio signal decoding, audio signal processing and board sub-assembly, comprising digital Circuit consisting system circuits and board power amplifier sub-assembly, comprising power equalizer Circuit supply, active Magnet Loudspeaker paper pulp cone, or polypropylene, made from with accompanying dustcaps, of a kind 20 30 20 91 92 30 40 TARIC CN code ex 8518 29 95 ex 8518 30 95 ex 8518 40 80 ex 8518 90 00 ex 8518 90 00 ex 8518 21 00 *ex 8518 40 80
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 210
review mandatory End date for End date
31.12.2019 31.12.2019 31.12.2018 31.12.2018 31.12.2020 31.12.2019 Unit Supplementary p/st - p/st p/st - p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
)
1
connector — 25 of mm or more but not than 250 mm, an outside diameter — 20 frequency of Hz or more but not than 150 resonance a Hz, — height of 5 mm or more but not than 50 a total mm, — an edge thickness of 0,1 but not more than 3 mm mm or more shape of a disk, whether or not containing a hole in the of a centre, kind used in car loudspeakers — coating and and magnet system holder with a protective frame a speaker cloth anti-dust embossed — an ( of loudspeakers for use in the manufacture drive, disk hard a — without drive, DVD-RW a without or — with — motion with either detection or capability of motion detection through IP connectivity via LAN port, serial USB a without or — with ( systems television (CCTV) surveillance of closed-circuit for use in the manufacture circuit, printed — a — contained in a housing, circuit, a photo-detector, in the form of monolithic integrated connectors, 3 than more — not transistor, 1 than more — not Description Upper plate for a loudspeaker magnet system of integrally punched, stamped and plated steel, in the in steel, plated and stamped with punched, speaker integrally electrodynamic of an system for Diaphragm magnet loudspeaker a for of: consisting plate housing, Upper loudspeaker car Integrated recorder: video in coreplate, the form of a disk on cold-upsetted steel Integrally one side provided with a cylinder, Digital of a compact disc player, comprising: read-head assembly for a laser Electronic 50 60 80 91 20 50 TARIC CN code ex 8518 90 00 ex 8518 90 00 ex 8518 90 00 ex 8521 90 00 ex 8522 90 49 ex 8518 90 00
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 211
review mandatory End date for End date
31.12.2019 31.12.2019 31.12.2018 31.12.2017 31.12.2016 31.12.2018 31.12.2018 Unit Supplementary p/st p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
) 1
) )
1 1
)
1 within the assembly) without signal processing capabilities, without signal within the assembly) within the assembly, with a signal decoder, Printed circuit board assembly comprising: Printed circuit — and of receiving a radio tuner (capable decoding those signals radio signals and transmitting — control messages and remote controlling the tuner chipset, capable of receiving a microprocessor ( systems of home for use in the manufacture entertainment board subassembly, Printed circuit comprising: — and a radio tuner, capable of receiving decoding those signals radio signals and transmitting receiver, control remote (RF) frequency radio — a transmitter, signal control remote infrared — an generator, signal SCART — a sensor state TV — a ( systems of home for use in the manufacture entertainment converter integrated circuit heading in products of 8521 circuits and/or integrated monitors of televisions, for use in the manufacture of metal, stiffener Holder, fixing item or internal ( and video players recording capable of double layer with driver or control functions, whether not incorporating a trans circuits containing integrated ( former, for use in the manufacture of products falling within heading 8521 — not more than 3 variable and 4 fixed resistors, fixed 4 and variable 3 than more — not capacitors, 5 than more — not the whole mounted on a support Description Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors of temperature operating the maintaining for aluminium, of fins cooling and sinks and a signal integrated circuit driver a laser printed circuit, Assembly, a flexible comprising at least Heat Assembly for optical discs, comprising at least an optical unit and DC motors, whether or not board circuit a motor and a printed assembly comprising at least Video tape recording/reproducing 60 10 65 20 30 25 40 30 70 15 65 70 TARIC CN code ex 8522 90 49 ex 8527 99 00 ex 8522 90 80 ex 8522 90 49 ex 8527 99 00 ex 8529 90 65 ex 8522 90 49 ex 8522 90 80 ex 8529 90 92 ex 8522 90 80 ex 8522 90 80 ex 8529 90 65
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 212
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2016 31.12.2018 31.12.2018 31.12.2018 31.12.2017 31.12.2016 Unit Supplementary p/st p/st p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1 0 % 0
)
)
1 1
)
1
) 1
)
1
circuit and one beam splitter digital video and/or audio signals, comprising at least a laser optical reading and/or writing unit, one or more DC motors and not board board or containing containing a printed circuit a printed circuit products of manufacture the use in for sounds and images, processing for signal of not capable ( 8543 or 8528 8526, 8527, 8519, 8521, headings within falling signal on DVD, least recording of optical comprising at diode, laser — a circuit, integrated driver laser — a circuit, integrated detector photo — a actuator, an and circuit integrated monitor front — a ( within of products heading falling for use 8521 in the manufacture least: comprising at wavelengths, different three at operating diodes — laser and circuit, integrated detector photo — a actuator, — an ( within of products heading falling 8521 for the manufacture least: comprising at wavelengths, different three at operating diodes laser with unit up pick optical — an motor, spindle — a motor stepping — a ( within heading of products the manufacture falling 8521 ( under heading 8521 products falling Description Laser optical drive unit assembly (so called mecha units) for the recording and/or reproduction of reproduction and/or recording the for units) mecha discs, called CD (so and assembly DVD unit Blu-ray, drive with discs, optical use integrated diode, one photo detector one laser CD consisting of player, head for reading Optical CD Laser for and recordable, DVD not Blu-ray, or with pick up CD Laser optical unit for the reproduction of optical signals from or DVD and the whether use unit, for pick-up of recordable, optical manufacture ( not Blu-ray the or 8521 in whether heading use mechanism, of for drive products signals, Blu-ray in mid-frequency incorporation into for signals drive, high-frequency disk use in motor, for video and Video video heads or with audio heads and head drum, with an electric transforming Hard Tuner 75 80 81 83 84 85 96 97 TARIC CN code ex 8522 90 80 ex 8522 90 80 ex 8522 90 80 ex 8522 90 80 ex 8522 90 80 ex 8522 90 80 ex 8522 90 80 ex 8522 90 80
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 213
review mandatory End date for End date
31.12.2020 31.12.2018 31.12.2018 31.12.2016 31.12.2017 Unit Supplementary - - - - -
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
)
1
)
1 )
1
)
1 (CMOS) sensor, units ( of not processor, having resolution and a color an image image sensor, an objective comprising an manu the housing, for and/or cable with fitted not or whether 280 pixels, 1 024 × 1 than more ( 00 12 of goods facture of subheading 8517 Camera: kg, 5,9 than more not of weight a — of housing, a — without — of dimensions of not more than 405 mm × 315 mm, with a single Charge-Couple-Device (CCD) or Complementary Metal Oxide — Semiconductor megapixels, 5 than more not of pixels effective — with ( eye-checks systems or in appliances for (CCTV) surveillance television use for in closed circuit processor, having image and a colour an sensor, an objective mm × 25 mm, comprising an image resolution of not more than 1 600 × 1 200 pixels, ( whether whether or not mounted on a base and containing a LED chip or not fitted with cable and/or housing, ( of products of heading manufacture 8528 Description Assembly for cameras used in computer notebooks of dimensions of not more than 15 mm × 25 × the navigation into car incorporation with non-upgradable of uploaded SD memory card maps for set mm in 15 use than for 18 mm, × 15 mm × than 10 mm not more dimensions of of cameras television Assembly for more microphones, not two of with dimensions HD, of P notebooks 720 computer * in 280 used 1 cameras of for resolution Assembly a with module Camera 31 10 10 20 40 45 TARIC
CN code ex 8525 80 19 ex 8523 51 99 ex 8525 80 19 ex 8525 80 91 ex 8525 80 19 ex 8525 80 19 ______
M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 214
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2019 31.12.2020 Unit Supplementary - - - -
duty 0 % 0 % 0 % 0 % Rate of autonomous
) 1
)
1
) 1
length), block of the RGB for distribution spectrum colours to the three sensors, compensation pixel and defective — x height (width than 27 x 30 38,5 mm not more of socket) cable dimensions (without with — MOS with three imaging megapixels per sensor sensors and with two a prism or more effective mount, lens C-Mount a — with g, 70 than more not of weight a — with output, video digital LVDS an — with — with a permanent EEPROM memory for local storage of calibration data for colour rendering ( systems camera industrial miniaturised of manufacture the in use — for ( manufacture of products falling within heading 8528 — a or ‘Dynamic’- ‘Static overlay lines’ system, signal, video NTSC output — an more, or V 6,5 of voltage — a — of 0,5 an illuminance lux or more sensor, image — an (lens), objective — an processor, colour — a — board, board circuit or a printed circuit printed a flexible — whether or not audio capable of receiving signals, — 15mm, 15mm x than not more module dimension of a 232 pixels and higher), 616*1 — a resolution of 2 mega pixel or more (1 and wired, not or — whether housing — a for use in the manufacture of products falling within subheading 8517 12 00 or 8471 30 00 ( Description Remote camera head, whether or not contained in a housing a in contained not or whether head, camera Remote using: cameras, with: scanning Camera module with a resolution of 1 920 x interface Image 1 080 P HD with two microphones for use in the electrical MIPI using Cameras 50 55 60 65 TARIC CN code ex 8525 80 19 ex 8525 80 19 ex 8525 80 19 *ex 8525 80 19
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 215
review mandatory End date for End date
31.12.2019 31.12.2019 31.12.2018 Unit Supplementary - - -
duty 0 % 0 % 0 % Rate of autonomous
m, μ
)
1
m or more, but not more than 17 m or more, μ
)
1 generator, more than 110 mm and equipped yoke, with a deflector and — a resolution of up to 640 × 512 pixels, 512 × 640 to up of resolution — a g, 400 than more not of weight — a — than 70 not mm × 86 more mm × 82 of mm, measurements housing a in not or — whether and plug qualified automotive- — with % — of not more than 20 range work temperature a deviation of the output over the entire signal — a sensitivity in the wavelength area of 7,5 of area wavelength the in sensitivity — a least: at Assembly consisting of — and a sound amplifier an audio frequency least unit, comprising at amplifier an audio frequency and transformer, — a receiver broadcast radio — a ( products of consumer electronic for use in the manufacture — monochrome of not tube with a diagonal screen of the screen cathode-ray measurement a flat — and transformer, a on mounted unit, a video-amplifier which are a deflection circuit a printed the whole mounted or not of video entry-phones, the manufacture on video a chassis, for telephones ( apparatus or surveillance Description Long wavelength infrared camera (LWIR camera) (according to ISO/TS 16949), with: 16949), ISO/TS to (according camera) (LWIR camera infrared wavelength Long comprising: monitor Video 20 85 70 10 TARIC
CN code ex 8527 91 99 ex 8529 90 65 ex 8528 49 10 *ex 8525 80 19 ______
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 216
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2019 Unit Supplementary - - p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
)
6 ) (
1
having DC but a than 30 input V, voltage of 7 V or more not more with a diagonal measurement of 33,2 of the screen or less, cm frame, mounting and cover back with housing, a — without housing, a with — or used permanent incorporation or mounting, for assembly, during into industrial goods of ( Chapters 84 to 90 and 94 supply, power and circuitry drive — with apparatus, other combined with excluding those board circuit printed a facilities, screen touch — comprising ( used for permanent incorporation or mounting systems for vehicles into entertainment housing 30 kHz), contained in a MHz (± 40 than 70 6 dB and bandwidth dB, not more than 30 kHz at not more contained in a of housing 990 MHz with an insertion loss of not more than 3,5 dB, contained housing in a more than 1 — frequency range of 10 kHz with an applicable but no or more more than 100 MHz electrodes with provided plates ceramic of housing a — with in audio visual and communication resonator or transducer kind used of a in electrical-mechanical equipment Description Liquid crystal display colour video monitors, excluding those combined with other apparatus, other with combined those excluding monitors, frame, video a colour on display not mounted crystal but assembly Liquid more monitor or video MHz colour 485 display of crystal frequency Liquid center a for filters, a frequency of 10,7 for resonator and 1 ceramic filters package comprising 2 ceramic filter Ceramic wave acoustic surface a with 1,5 kHz), 455 kHz (± or 1,5 kHz) 450 kHz (± of frequency centre a for filter Ceramic excluding Filters, filters Ceramic 10 20 20 50 60 70 TARIC CN code ex 8528 59 70 ex 8529 10 80 ex 8529 10 80 ex 8529 10 80 ex 8529 10 80 *ex 8528 59 70
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 217
review mandatory End date for End date
31.12.2020 31.12.2018 31.12.2019 31.12.2016 31.12.2020 31.12.2016 31.12.2017 31.12.2019 Unit Supplementary p/st p/st p/st p/st p/st p/st p/st -
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
) 1
)
1
)
1
)
1 — a printed circuit printed — a — applications and video processors for multi-media signal processing Array) Gate Programmable (Field — FPGA memory — Flash memory — operating interfaces RJ-45 and USB VGA, — HDMI, — sockets and plugs for connecting a LCD-monitor, LED lighting and panel a control Parts of TV-apparatus, having and micro-processor video-processor functions, comprising at least a and a video-processor, mounted and micro-controller housing on contained in a leadframe a plastic ( heading within 8527 products falling of manufacture the use in signal, for ( under heading 8528 products falling on panel of a LCD a TFT glass module ( manufacture of LCD modules or addressing, pixel for signals driving of generation — the pixels addressing — driving ( falling under heading 8527 Description Electronic assembly comprising at least coded at audio comprising of the circuit digital assembly manufacture in control to Electronic the use a signals in for to frequency use circuit, directly high for printed signals satellite signals, flexible control transforming a mid-frequency and module products and into voltage receiver of circuit signals supply radio manufacture integrated high-frequency distributing Satellite the electronic transforming for in an board Tuner for: use of circuit chips for consisting Printed semiconductor signal, driver least digital Unit at into comprising signals Modules high-frequency transforming Tuner 30 44 15 45 50 65 70 75 80 TARIC CN code ex 8529 90 65 ex 8548 90 ex 8529 90 65 ex 8529 90 65 ex 8529 90 65 ex 8529 90 65 ex 8529 90 65 *ex 8529 90 65 *ex 8529 90 65
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 218
review mandatory End date for End date
31.12.2018 31.12.2020 31.12.2018 31.12.2020 Unit Supplementary p/st p/st p/st -
duty 0 % 0 % 0 % 0 % Rate of autonomous
) 1
)
1
)
1
and other active and passive components, active and other LCD modules, — cells, solely consisting of one TFT glass or plastic or more facilities, screen touch with combined — not addressing only, pixel for electronics boards with control circuits — more printed with one or and unit, backlight without or — with inverters without or — with — cells, one or plastic or more TFT glass sink, heat cast die — a unit, backlight — a and controller, micro with board circuit printed — one interface, Signalling) Differential Voltage (Low — LVDS ( motor vehicles of radios for for use in the manufacture ( heading 8528 within falling products of manufacture the in use for and lenses, — of 14,5 of the screen but not than 25,5 a diagonal cm or more more measurement cm, module driver backlight, bus LED — a LIN controller, timing microcontroller, EPROM, with board circuit printed — a — pin LVDS interface, supply and 4- power pin plug for 8 an housing, a in not or — whether ( for permanent incorporation or mounting into motor vehicles of chapter 87 Description solely consisting of: LCD modules, not combined facilities, with touch screen system, a positioning video projection, comprising a colour separation mechanism unit for Optical with: modules LCD 15 60 25 32 35 TARIC
CN code ex 8529 90 92 ex 8548 90 *ex 8529 90 92 *ex 8529 90 92 *ex 8529 90 92 ______
M5 M4 ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 219
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2020 Unit Supplementary - - p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1 0 % 0
) 1
)
1
)
1
)
1 passive components, — of 14,5 of the screen but not than 20,3 a diagonal cm or more more measurement cm, screen, touch a without — or backlight, LED — an and active other and receiver LVDS microcontroller, EEPROM, with board circuit printed — a — power supply and CAN 12 pin plug for and LVDS a interfaces, — in a housing with monitor and other control functions, ( in motor vehicles of chapter 87 for installation magnesium, and — silicon 200 mm, — with a length of 300 mm or more but not than 2 ( of TV sets shaped use in the manufacture for specifically circuits, for ( the manufacture of television projection equipments or video projectors ( within heading 8527 of products falling or 8528 the manufacture use in for circuits, integrated pixel address only and without a power supply with or for and/or control electronics Description LCD module with: module LCD containing: ( and alloy projectors control transistors aluminium electronic video of of and of temperature ledges chips driver manufacture operating covering (DMD) without the the and device or in maintaining micromirror Fastening with use digital for electrodes, for prisms, fins, display (DMD)-chips, comprising cooling and device Assembly and address micromirror sinks only Digital heat incorporating Aluminium module display Plasma 36 37 40 41 42 43 TARIC
CN code ex 8529 90 92 ex 8529 90 92 ex 8529 90 92 ex 8529 90 92 *ex 8529 90 92 *ex 8529 90 92 ______
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 220
review mandatory End date for End date
31.12.2018 31.12.2019 31.12.2019 31.12.2020 Unit Supplementary p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
1
m in monochromic version with microlenses applied to each individual pixel applied to each microlenses monochromic version with m in μ m × 12 μ unit, and signalling) interface CAN/power supply socket or with an APIX (Automotive Pixel Link) controller with APIX interface, (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro whether or not or in polychromic with a lenslet version with a colour array) filter, (microlens mounted with one lenslet on lens) array each individual pixel die, power management die, GSM filters and discrete as well as embedded passive circuit elements circuit embedded passive as well as and discrete die, GSM filters management die, power broadcasting videosignals of digitally of DVB-T for reception and DVB-H formats not more with pixels of circuit monolithic integrated of analogue or digital, the form in cameras than 12 composed of: filter, noise a with AC socket V, 230 of connection) cord power (for socket — AC inductors, and capacitors of composed filter noise — integrated — power supply display panel) connecting an AC connector for socket with the PDP (Plasma cable whether or not equipped support, with a metal which joins the AC socket to the PDP TV set — with a diagonal of the screen of 14,48 measurement cm or more but not more than 31,24 cm, micro-controller, backlight, — with with a CAN with (Controller area network)-controller LVDS (Low-voltage differential — — in a housing without a heat sink with or at the back of the housing, module, signal-processing a — without ( 87 of vehicles chapter for use in the manufacture Description Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, decoder channel a video containing digital functionality for reception CMOS-Sensor) TV or with CCD-Sensor package Interline circuit scan’ Integrated (‘progressive sensors image Area heading 8528: LCD monitors of Colour LCD display panel for 49 83 45 47 50 TARIC CN code ex 8529 90 92 ex 8529 90 92 ex 8536 69 90 ex 8529 90 92 *ex 8529 90 92
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 221
review mandatory End date for End date
31.12.2019 31.12.2019 31.12.2017 31.12.2020 Unit Supplementary p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
1
)
1
Signalling) interface and a CAN/power Signalling) interface connector, not combined with touch screen facilities and one or more printed circuit boards with control and one circuit not or more printed combined with touch screen facilities ( and monitors of TV sets use in the manufacture pixel addressing, for for electronics LEDs, organic with layer organic — the — two conductive layers on and electron transfer electron holes, 080 920 x 1 — with resolution of 1 (TFT) of transistors layers diodes, organic of supply power for cathode and — anode filter, — RGB layer, protective plastic or — glass addressing, pixel for electronics the — without ( of goods for use in the manufacture of headings 8528 magnesium, and silicon containing alloy aluminium an — of 200 mm, — with a length of 500 mm or more but not than 2 500 mm, — with a width of 300 mm or more but not than 1 of a kind the production used of TV sets for — of 14,48 measurement but with a diagonal cm or more screen not more than 26 cm, screen, touch — without micro-controller, and backlight a — with — with a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Description material, containing organic cells, plastic or TFT glass more one or OLED modules, consisting of OLED display consisting of: frame: covering and fastening Rectangular housing: a in module LCD Colour 55 65 70 85 TARIC
CN code ex 8529 90 92 ex 8529 90 92 ex 8529 90 92 *ex 8529 90 92 ______
M5 M4 M5 M4 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 222
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2020 31.12.2018 31.12.2018 31.12.2020 Unit Supplementary p/st p/st p/st p/st p/st -
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
)
1
and solder points, for use in the manufacture of back-light units for LCD modules ( modules LCD for units back-light of manufacture the in use points, for and solder casing: in a Semiconductor module switch — chip and diode a chip on one lead frames, or more consisting of an IGBT transistor 200 V — a voltage of 600 for V or 1 direct mounting on an motor electric coil, contained in a sealed hermetically housing function, switching electromechanical — an — or more but not exceeding 16 of 3 amperes amperes, a load current — voltage of 5 volts or more but not exceeding 24 a coil volts, — not more than 12,5 mm between the connector pins of load circuit a distance DC V 12 of voltage nominal — a DC V 16 than more not of voltage allowable — an %) 10 (± Ohm 7 26, of °C 20 at resistance coil — a V 8,5 than more not of °C 60 at voltage pick-up — a — without a signal processing module, processing signal a — without only, addressing pixel for electronics control — with screen, display the moving for mechanism motorised a — with ( in vehicles of Chapter for permanent installation 87 Description Electro-accoustic transducer Electro-accoustic connections with electrical of plates consisting isolating material board in the form Printed circuit with: relay power of 50 current A or more, comprising a snap switch, for switch with a cut-off action Thermo-electric A with: Relays 30 83 40 20 11 40 30 TARIC
CN code ex 8531 80 95 ex 8536 50 80 ex 8536 30 *ex 8535 90 00 *ex 8535 90 00 *ex 8536 41 90 *ex 8536 49 00 ______
M4 M5 M4 M5 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 223
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2019 Unit Supplementary p/st p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
) )
1 1
) He/sec at one bar in the temperature 1
3 cm
-6
)
1
range 0 °C to 160 °C, to be incorporated into compressors for refrigerating equipment ( equipment range 0 °C to 160 refrigerating for °C, into compressors to be incorporated excluding wires, with a maximum leakage rate of 10 of rate maximum leakage a with excluding wires, housing of products of manufacture the in use 50mA, for than more not of strength current a at 60V and ( headings 8521 8528 or connections 3 housing with and Devices, having switching functions, comprising one controller monolithic adjustable or more whether or integrated circuits not combined with semiconductor elements, mounted together on a leadframe and contained in a plastic housing 250 V, than more not but — more or 240 V of voltage a — than 6 but not of 4 A A, more or more an amperage ( within heading of machines falling for use 8467 in the manufacture 300 V, than more not but — more or 240 V of voltage a — than 15 but not of 3 A more or more an amperage A, ( within heading of machines falling for use 8467 in the manufacture — a drop-out voltage at 20 °C of 1 V or more Watts 5,4 of °C 20 at power operating nominal — a DC V 400 than more not of voltage switching — a A 120 than more not of capacity current-carrying permanent — a ( vehicles electric for of batteries for use in the manufacture Description Thermal relays contained in a hermetically sealed glass cartridge of not more than 35 mm in length in mm 35 than more not than of more cartridge not glass of sealed voltage hermetically a a at in operating contained circuits, relays electronic Thermal connecting for switch with: tact of 4,9 mount 0,9 type, N (± N), contained operating at a force printed circuit in a Switch of the circuits, Mechanical electrical connecting for contained in a sensor and 2 capacitors, effect switch, comprising 1 magnet, 1 Hall effect Hall switches with: governer circuits, speed electrical Mechanical connecting for switches Mechanical 93 97 91 31 32 91 81 82 TARIC CN code ex 8536 50 19 ex 8536 50 11 ex 8536 50 11 ex 8536 50 19 ex 8536 50 80 ex 8536 50 80 ex 8536 50 80 ex 8536 49 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 224
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2017 31.12.2020 31.12.2017 31.12.2019 31.12.2020 31.12.2016 31.12.2016 31.12.2016 Unit Supplementary p/st p/st p/st p/st p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
) 1
) 0 % 0 1 )
1
)
1
) 1
)
1
) 1
) 1
)
1 more than 50 ms and an actuating current of not more than 500 more than 50 current ms and mA at a voltage of 12 an actuating V than 5 A, for use in the of not more strength more but not than 250 a current V and at ( of products of headings manufacture 8521 or 8528 ( manufacture of products falling within headings 8521 and 8528 ( processors speech and aids hearing of production the in use for 10,8 mm, integrating at least: — core, including a wide-band ferrite a pulse transformer, coil, mode common — a resistor, — a capacitor, — a ( within headings of products 8521 falling for use in the manufacture or 8528 ( of goods USB use within headings in the manufacture devices, for 8521 falling or 8528 ( within headings of products 8521 falling manufacture or 8528 within falling products of manufacture the in use for 2 rows, in 20 pins or housing, 19 pins with ( headings 8521 8528 or ( within headings of products 8521 falling use in the manufacture rows, or 8528 for Description Mechanical push-button switch for connecting electronic circuits, operating at a voltage of 220 V or V 220 of voltage a at operating circuits, electronic ( connecting apparatus for reception switch television push-button LCD not of switching time switches, with a comprising 3 electromagnetic cable, coaxial Switch unit for Mechanical of 3 manufacture in the pins housing, or metal 21 SCART with use in the pins in 2 rows, for into a plastic type connectors, built in metal 15 use or with for sockets and plugs with a length of not Electrical more than 12,7 of not more than mm or a diameter plastic housing, connector a metal Pitch into or built Modular socket or plug networks, whether or not for local area plastic combined with other sockets, plug, a or into socket built type plug, (HDMI) bus (USB) socket or plug for connecting Universal serial in a single or multiple form with other or Interface socket Multimedia housing, metal use in the or with no than 96 more pins, for plug, built into a plastic Socket or High-Definition type (D-sub) D-Subminiature 93 98 51 60 81 82 84 85 86 87 TARIC CN code ex 8536 69 90 ex 8536 69 90 ex 8536 50 80 ex 8536 69 90 ex 8536 69 90 ex 8536 69 90 ex 8536 69 90 ex 8536 69 90 ex 8536 50 80 *ex 8536 69 90
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 225
review mandatory End date for End date
31.12.2017 31.12.2016 31.12.2020 31.12.2020 31.12.2018 31.12.2018 31.12.2016 31.12.2017 Unit Supplementary p/st p/st p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
)
1 0 % 0
)
1 tin oxide and of indium oxide taken together oxide and of tin transistors), connectors of and a kind interfaces, used for soldering on boards, for connecting printed circuit electrical apparatus and circuits and switching or protecting electrical circuits with a voltage of not 000 V more than 1 ( or 8528 000 V voltages of not more than 1 contact pads, for copper — of of %) — 1,0 % (± alloy AgNi10 containing nickel by or with silver plated with silver weight 11,2 — with a thickness of the plating 0,3 0/+ 0,015 mm (– mm) connector, of rubber or silicone, consisting of one conductor Elastomeric or more elements ( of goods within headings 8521 falling or 8528 least: at containing bus protocol, relays, — microprocessor motor, stepper — a and memory, (EEPROM) Read-Only Programmable Erasable — Electrically — other passive components (such capacitors, as connectors, diodes, resistors, voltage stabilizer, with a voltage of 13,5 V Description Secure Digital (SD), CompactFlash, ‘Smart Card’ and ‘Common modules female interface (cards)’ Optical socket, plug use of goods or connector, in the manufacture for within headings falling 8521 contacts Semiconductor chip housing containing equipped frame a lead frame in the form of with a plastic Rivet connections with frame stamped Metallic slot, push-push type memory card (SD) Digital Secure or push-pull type, use in the manufacture for dashboard module, operating through control processing and evaluation vehicle CAN — the Data 94 10 88 10 20 30 92 97 30 TARIC CN code ex 8536 90 85 ex 8536 90 85 ex 8536 90 85 ex 8536 70 00 ex 8536 90 85 ex 8544 49 93 ex 8536 90 85 ex 8537 10 91 ex 8536 69 90
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 226
review mandatory End date for End date
31.12.2020 31.12.2018 31.12.2018 Unit Supplementary p/st p/st p/st
duty 0 % 0 % 0 % Rate of autonomous
mm × 420 mm × 230 mm, cars — sockets with or without fuses, without or with — sockets ports, — connecting relay and switch micro microprocessor, embedded with board circuit printed — a of a kind of goods used in the manufacture of chapter 87 V, Electronic control units, manufactured according to class 400 2 of IPC-A-610E standard, with at least: than more not but more or V 208 of input power AC — an DC, V 24 of input power logic — a breaker, circuit automatic — an switch, power main — a cables, and connectors electrical external or — internal 630 than more not but — more, or 75 mm × 180 mm × 281 mm of dimension housing with a in of a kind or sorting machines manufacturing recycling used for frames, in lead separate motors on interconnected, DC not controlling circuits, integrated for more or (MOSFET) — one Transistors Effect Field Oxide Metal discrete with — also housing plastic a in — mounted Description Fuse control module in a plastic housing with mounting brackets comprising: brackets mounting with housing plastic a in module control Fuse of: consisting memory programmable without ICs bridge Motor 60 45 50 30 TARIC
CN code ex 8537 10 99 ex 8537 10 91 ex 8537 10 99 *ex 8537 10 91 ______
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 227
review mandatory End date for End date
31.12.2020 31.12.2019 31.12.2019 31.12.2019 Unit Supplementary p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
1 wiper timing, window lighting, heating, seat belt interior reminder vehicles (for connection vehicles (for of audio, telephony, navigation, service) car and camera wireless containing: knobs rotary — 2 pushbuttons more or — 27 lights — LED — and receiving sending signals via the LIN-bus for of control circuits 2 integrated circuit board inside and with or without metal holder, of: — a length of 50 mm or more, but not more than 120 mm, — a width of 20 mm or more but not than 40 mm, — a height of 30 mm or more, but not more than 120 mm of a kind of goods used in the manufacture of Chapter 87 holder, metal and board circuit printed with box — plastic — with voltage of 9V or more, but not than 16V, more — in an automobile, at least and services manage able to control, evaluate functions of assisting of a kind of goods used in the manufacture of Chapter 87 microprocessor, — a indicators, (LCD) display crystal liquid or (LED) diode — light-emitting circuit, printed 00 and a on mounted components — electronic 50 80, 8516 20 products of headings of built-in 8514 manufacture for use in the 8516 60 80 ( Description Electronic control unit for monitoring car vehicle tyre pressure comprising plastic box with printed with box plastic comprising pressure tyre vehicle control unit Electronic without memory, for a voltage of 12 V, for information exchange systems in car monitoring for comprising unit Module) control Control Electronic (Body BCM unit control Electronic of: consisting assembly Electronic 35 40 50 60 TARIC CN code ex 8537 10 99 ex 8537 10 99 ex 8537 10 99 ex 8537 10 99
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 228
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2019 31.12.2018 31.12.2018 31.12.2016 31.12.2016 31.12.2016 Unit Supplementary p/st p/st p/st p/st p/st p/st p/st - - -
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
) 1
)
1 sheets, fitted with electric conductors and connectors with electric sheets, fitted ( temperature control systems housing contained in a dual lead frame transistors effect Unit consisting of two junction field Interior antenna for a car door locking system, comprising: housing, plastic a in module antenna — an — a connection with a plug, cable brackets mounting two least — at transistors and diodes circuits, integrated including PCB not or — whether of a kind of goods used in the manufacture of CN heading 8703 whether pad switches steering for and cases covers styrene butadiene acrylonitrile or Polycarbonate paint or not coated on resistant the outside with a scratch dimensions of which the exterior do not exceed 5 mm × 48 mm than more but not of 650 voltage more components V or and diodes with a than IGBT chips 1 200 ( V 570 mm than 120 than 5 mm and with a length of more than 1 mm but not more of 79 cm or more a diagonal of the screen measurement Description Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or plates mounted plastic vehicle or of glass manufacture two the between in grid use conductive for a V, of 12 of consisting voltage panel, a screen for sensitive units Touch control Electronic casing, to a cylindrical coated copper fuse, consisting wire attached of a tin of an electrothermal Part Copper base plate, of a kind of IGBT modules used containing as a heatsink in the manufacture of not more lamps, of a diameter fluorescent (EEFL) Cold electrode cathode (CCFL) or external guns technology), Colour tube equipped with cathode-ray placed side by with electron side (in-line Photomultiplier 94 20 30 20 50 10 92 93 92 95 20 93 91 TARIC CN code ex 8538 90 91 ex 8538 90 99 ex 8537 10 99 ex 8538 90 99 ex 8547 20 00 ex 8537 10 99 ex 8543 70 90 ex 8538 90 99 ex 8538 90 99 ex 8539 39 00 ex 8540 11 00 ex 8540 20 80 ex 8537 10 99
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 229
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary - - - p/st p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
) 1
0 % 0
for use in the manufacture of products falling within subheading 8516 50 00 ( which do not exceed 300 mm × 350 rows of mm excluding leads. The tube contains one or more or lines arranged in rows, or line consisting characters each of fluorescent or phospho character mounted base which are on These elements is covered elements. a metallised with fluor rescent escent substances or phosphorescentwhich give off light when salts bombarded with electrons housing and passive active switching VHF and consisting of than 870 UHF signals, more of MHz, capable mounted contained elements in a housing on a printed circuit, flange in a housing a metal housing a MHz, contained in whether and one circuit, photodiodeequipped driving circuit, with amplifier with an integrated diodes or one and or more light-emitting at circuit or logic gate arrays not with an integrated logic gate arrays whether or not with an integrated circuit, 2 photodiodes least with an amplifier circuit or other integrated circuits, contained in a housing and not mounted active passive elements on contained in a housing a substrate, record and playback, comprising 2 mounted or 3 circuits monolithic integrated on a printed circuit contained in a housing or a lead frame, Description Continuous wave magnetron with a fixed frequency of 2 460 MHz, packaged magnet, probe output, probe magnet, packaged MHz, 460 2 a of in frequency contained fixed circuit, a printed with a magnetron on wave mounted Continuous elements passive tube and a glass housing of a tube consisting of Displays in the form mounted on a board the dimensions of display active fluorescent not of or Vacuum consisting whether Amplifier, (LEDs), simultaneous diodes light-emitting and Radio frequency (RF) modulator, with a operating frequency range of 43 MHz or more but not more storage or data one chips on capacitor and discrete circuits integrated more comprising one or amplifier High-frequency audio comprising stereo circuit with a fixed frequency, within a frequency range of oscillator 1,8 crystal MHz to 67 Piezo-electric of Opto-electronic capable circuit, reproducing and recording with a centre frequency of 20 Oscillator, GHz or more but not more than 42 GHz, consisting of Audio 20 91 92 30 35 40 45 55 60 65 TARIC CN code ex 8540 89 00 ex 8540 89 00 ex 8543 70 90 ex 8543 70 90 ex 8543 70 90 ex 8543 70 90 ex 8543 70 90 ex 8543 70 90 ex 8540 71 00 *ex 8543 70 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 230
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2020 31.12.2019 31.12.2018 31.12.2017 31.12.2018 Unit Supplementary p/st p/st p/st p/st p/st p/st -
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
the Media Orientated Systems Transport network (MOST), Systems Transport the Media Orientated 0,03 than 0,8 mm (± mm), piezo-electric crystal and an adjustable capacitor, contained in a housing and contained mounted in a housing active passive elements on a printed circuit, socket, output network) area (Controller power/CAN mains — a and ports IN/OUT audio and (USB) with bus systems serial universal operating — a phone smart of interface the for device switching video a — incorporating ( of vehicles Chapter 87 for use in the manufacture strips in a housing ribs ribs of nickel, and fixed via equipped pan fixed via a titanium mesh of titanium, of with a wire of titanium, which both back pans fixed together to back are with: cable flexible PET/PVC insulated V, 60 than more not of voltage — a A, 1 than more not of current — a °C, 105 than more not of resistance heat — a — of individual a thickness of not than wires more 0,1 0,01 mm (± and mm) a width of not more and mm, 0,5 than more not of conductors between distance — a — of conductors) not more than 1,25 to centreline mm from centreline a pitch (distance Description Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a least at mounted are which of on consisting circuit oscillators, printed compensated a temperature comprising than of: oscillator, other comprising compensated (VCO), module Temperature oscillator control controlled and Voltage view telephone Mobile cathode Stainless steel in the form of a plate with a hanger bar, whether or not with plastic side contained circuit, printed a 8542 mounted on 8541 or heading within falling products of Assembly device, consisting of a pan of nickel equipped mesh of nickel, of an electrolysis with a wire Part 10 20 20 80 85 95 20 30 40 TARIC CN code ex 8544 20 00 ex 8544 42 90 ex 8543 70 90 ex 8543 90 00 ex 8543 90 00 ex 8543 90 00 ex 8544 49 93 ex 8543 70 90 *ex 8543 70 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 231
review mandatory End date for End date
31.12.2018 31.12.2019 31.12.2019 31.12.2020 31.12.2020 31.12.2020 Unit Supplementary - p/st p/st - p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
) ) 1 1
containing: cable, coaxial two-core — a connectors, more or — two dashboard the to attachment for clips plastic more or — 5 of kind goods of used in the manufacture of Chapter 87 of the following; measuring some or all km/h 24 than more not of speed travel — a rpm 500 4 than more not of speed motor — a Mpa 25 than more not of pressure — hydraulic tonnes metric 50 than more not of — mass ( of vehicles heading 8427 for use in the manufacture 12 with an operating voltage of V, system equipped harness of the steering with connectors on Wire box steering vehicle motor mounting on a for clamps anchor 3 plastic least having at both sides, Four-core connecting cable containing two connectors for the female transmission of digital signals from navigation and audio systems to a USB connector, of kind of goods used in the manufacture of Chapter 87 — of a voltage 5 V or more but not than 90 V, information transmitting of — capable ( of vehicles heading 8711 for use in the manufacture least: two connectors, containing at with cable Extension two-core grommet, rubber — a conduit, plastic — a bracket attachment metal — a of a kind used to connect vehicle speed sensors in the manufacture of vehicles chapter 87 Description Antenna connecting cable for the transmission of analogue radio (AM/FM) and GPS signals, GPS and (AM/FM) radio analogue of transmission the for cable connecting Antenna wire harness of a voltage 5V or more but not Multi-measurement more than 90 V capable of harness: wire Multi-measurement 40 60 80 40 50 60 20 30 70 TARIC CN code ex 8544 30 00 ex 8544 30 00 ex 8544 42 90 ex 8544 30 00 ex 8544 42 90 ex 8544 42 90 *ex 8544 30 00 *ex 8544 20 00 *ex 8544 30 00
M5 M4 ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 232
review mandatory End date for End date
31.12.2018 31.12.2020 31.12.2019 31.12.2020 31.12.2017 Unit Supplementary p/st - p/st m m
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
)
1
) 1
— a voltage of 1,25 V (± 0,25 V) — (± 1,25 V of voltage a — at one or both connectors fitted one ends, of which contains pins at least with a pitch of 1 mm, shielding, screening — outer electronic video processing and panel OLED or LCD, PDP communication between for used solely circuits wires, individual 80 or — 10 — a length of 50 mm or more, but not more than 800 mm, ends, both or one at fitted plug(s) and/or — connector(s) ( within of products headings falling for use 8521 in the manufacture and 8528 — of a voltage not than 80 more V, cm, 120 than more not of length a — with connectors, with — fitted ( of hearing aids, accessory kits and for use in the manufacture speech processors mm., 0,51 exceeding diameter a of wires conductor individual — with V, 000 1 than more not of voltage a — for ( of automotive for use cable harnesses in the manufacture — of a voltage not than 80 more V, platinum-iridium-alloy, a — of Description with: of 600 transmission Mbit/s or more, with: rate capable of a bit cable Data transmission conductor electric insulated PET conductors: Electric wires: electrical copper Insulated conductors: Electric 10 30 70 10 30 TARIC CN code ex 8544 42 90 ex 8544 49 91 ex 8544 49 93 ex 8544 42 90 ex 8544 42 90
M5 M4 M5 M4 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 233
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2017 31.12.2018 31.12.2020 31.12.2016 Unit Supplementary p/st - p/st - p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
)
1 0 % 0 )
1 0 % 0
)
1
)
1
the form of a hollow cylindrical body of an external diameter of 20 body mm or more but not than the form of a hollow diameter cylindrical of an external ( vacuum interrupters of manufacture the for 250 mm, than 40 MHz contained in a housing and a capacitor, diode and of a laser a photodiode unit, least Optical consisting at wavelength operating at a typical of 635 nm or more but not than 815 nm ( and of TV sets monitors of heading the manufacture 8528 — cells, solely consisting of one TFT glass or plastic or more facilities, screen touch with — combined addressing only, pixel for electronics boards with control circuits — more printed with one or and unit, backlight without or — with inverters without or — with — coated with poly(tetrafluoroethylene), with — coated connectors, — without ( of hearing aids, implants and for use speech in the manufacture processors Description Carbon fibre paper of a kind used for gas diffusion layers in fuel cell electrodes cell fuel in layers diffusion gas for used kind a accumulators of electric paper hydride fibre metal ( Carbon for use electrodes, in the manufacture of zinc-carbon batteries Carbon nickel or in of aluminium oxide, more metallised, % or containing by weight 90 ceramics, of fitting Insulated lithium-ion Spent sensor image Unit, resonator operating within a frequency range of 1,8 consisting of a MHz or more but not Contact modules, for core, used to suppress circuits, high with a ferromagnetic frequency noise in electronic Filters LCD 48 50 20 20 10 10 41 43 50 65 TARIC CN code ex 8545 19 00 ex 8547 10 00 ex 8548 10 29 ex 8548 90 ex 8548 90 ex 9013 20 00 ex 8548 90 *ex 8548 90 *ex 8545 90 *ex 8548 90
M4 M5 ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 234
review mandatory End date for End date
31.12.2019 31.12.2020 31.12.2019 31.12.2019 31.12.2020 31.12.2020 31.12.2017 Unit Supplementary - p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
)
1
)
1 , fitted with a cabin on either 3, 4 or with a cabin on either , fitted
3
)
1
)
1
)
1
— with a rating of 13,5 V (± 0,5 V) and V) 0,5 (± V 13,5 of rating a — with — cylinder in the master fluid pressure screw mechanism to control brake a ball ( motor vehicles of electric for use in the manufacture disk, brake service the within — operating — of 170 but mm or more not more than 175 with a diameter mm, ( of motor vehicles for use in the manufacture ( of goods in the manufacture of Chapter 87 manufacture the kind used in and mounting openings a and guide grooves, of containing functional of goods of Chapter 87 ( of Chapter 87 of motor vehicles use in manufacture the for differential shaft and front 5 wheels having a wheelbase of at least 480 into not containing working cm, machinery, to be built least at wheelbase of 5 wheels having a ( special purpose motor vehicles with a width of at least 300 cm Description Motor chassis with a self-ignition capacity of at least 8 000 cm 000 8 least at of capacity self-ignition a use with for chassis plate Motor back unit steel actuation band brake the powered Motor to mounted brake: material parking friction type with cardan Drum pads box, brake transfer organic without Non-asbestos converter torque hydraulic Body Parking Brake’) version of disc type brake in BIR in or EPB Ramp’) (‘Ball (‘Electronic a with gearbox jaw, of a kind used iron brake caliper of goods Ductile cast in the manufacture of Chapter 87 hydrodynamic Automatic 20 20 10 20 30 40 10 TARIC
CN code ex 8708 40 50 ex 8708 30 91 ex 8708 30 91 ex 8704 23 91 *ex 8708 30 91 *ex 8708 30 10 *ex 8708 30 91 ______
M5 M4 M5 M4 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 235
review mandatory End date for End date
31.12.2020 31.12.2020 31.12.2020 31.12.2020 31.12.2020 31.12.2019 31.12.2020 Unit Supplementary p/st p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
facture of goods facture of CN heading 8703 in the middle — of a length of 1 m or more but not than 2 m, — 6 of a weight kg or more but not than 9 kg and screws, mounting three with holder metal — a bump rubber — a of a kind of goods used in the manufacture of Chapter 87 blocks, of kind rubber silent of goods used in the manufacture of Chapter 87 of kind goods of used in the manufacture of Chapter 87 87 Chapter goods of mm, 0,1 than more not of flatness area insulating — an — quantity of 0,3 particle mg per tank, a permissible — between pores of 2 mm or more, a distance and mm, 0,4 than more not of sizes — pore — than 0,2 mm not more than 3 pores larger of a kind cooling used systems in heat exchangers for car Description Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint any without piece unique a of consisting plastics reinforced fibre carbon in with a constant velocity joint at each fitted end, of a kind Car axle side-shaft used in the manu shaft Transmission with: containing 42100 insulator AC strut EN Upper standard to manufactured tank label equipped plastic Rear chassis with a protective with two casings with arm pressed-in metal air outlet block, arm equipped Rear chassis pivot rubber silent and with a ball casing pressed-in metal or Aluminium with a ribbed design cooler using of a kind compressed air of used in the manufacture inlet alloy Aluminium 10 10 10 10 20 10 30 TARIC CN code ex 8708 91 99 ex 8708 91 35 ex 8708 50 55 *ex 8708 50 99 *ex 8708 80 35 *ex 8708 80 91 *ex 8708 80 91
M4 M5 M5 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 236
review mandatory End date for End date
31.12.2019 31.12.2020 31.12.2020 31.12.2020 31.12.2016 31.12.2020 Unit Supplementary p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
m) μ
m/-5 μ m (+ 15
μ
air bag sealing — having a wall thickness of 1,45 mm or more, but not more than 1,5 mm % 15 of break at elongation an — having — slotted of a kind the production used fork rods for of motorcycle facture of goods facture of Chapter 87 Inflatable safety cushion of high strength polyamide fibre — sewn forming thermal by fixed form, packing three-dimensional into — folded Inflatable safety cushion of high strength polyamide fibre: — sewn, load-regulated and forming — folded, cavity bag air for bonding silicone applied three-dimensionally — with technology inflator cool for — suitable brackets, mounting six least at with housing metal — a cushion, safety embedded — an gas compressed with filled cartridge — a of a kind of goods used in the manufacture of Chapter 87 ( vehicles motor of wheels front the for suspension systems steel carbon SAE1541 — of 20 of layer chromium hard a — with Description housing kind manu in aluminium used in the homokinetic hinges of a gear with Rack steering the in used of: bearings composed spherical airbag or balancing-arms passenger into Front incorporation for caps housing Metal tubes, Inner 10 20 20 30 20 10 20 10 TARIC CN code ex 8708 95 99 ex 8708 95 99 ex 8708 99 97 ex 8708 94 35 *ex 8708 95 10 *ex 8708 95 10 *ex 8708 95 99 *ex 8714 10 90
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 237
review mandatory End date for End date
31.12.2020 31.12.2020 31.12.2016 31.12.2018 31.12.2018 31.12.2020 31.12.2018 31.12.2016 Unit Supplementary p/st - - - p/st p/st - -
duty 0 % 0 % 0 % Rate of autonomous
0 % 0 )
1 0 % 0 )
1 0 % 0
0 % 0 )
1 0 % 0 )
1
)
1 mm, Frame, constructed from aluminium or aluminium and carbon fibres, for the use in manufacture for aluminium or and Frame, constructed from carbon fibres, ( of bicycles ( of bicycles use in the manufacture Front forks with aluminium legs, for cross-section, circular — of 66,802 496,06 mm, than 249,68 mm or more, but not than 1 — more with a length of 1 more not but more, or mm 63,8683 of — of 81,356 diameter mm or more, but not than 82,2198 of an external more mm, diameter external an to ends both on — swaged — MIL-H-6088, AMS 2770 standards AMS 2772 according to or treated heat core, methacrylate) poly(methyl — a polymer, fluorinated of cladding — a and mm, 3,0 than more not of diameter — a m, 150 than more of length — a cables of a kind of polymer fibre used in the manufacture Description Radiators of a kind used in motor bikes for fitting of attachments ( attachments of fitting for bikes motor in used kind a of ( ( Radiators bicycles bicycles of of manufacture manufacture the the in in use use fibres for for optical shafts: posts, Pedals, of rotor Seat assembly helicopter an Pre-formed from up with: made fibre reverser optical Image Polymer 23 33 24 34 70 71 20 10 30 50 10 30 TARIC
CN code ex 8714 91 10 ex 8714 91 10 ex 8714 91 30 ex 8714 10 90 ex 8714 91 10 ex 8803 30 00 ex 8714 91 30 ex 8714 96 10 ex 8714 99 90 ex 9001 10 90 ex 9001 10 90 *ex 8714 91 30 ______
M5 M4 M5 M4 M4 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 238
review mandatory End date for End date
31.12.2017 31.12.2018 31.12.2019 31.12.2019 31.12.2017 Unit Supplementary - - - - -
duty 0 % 0 % 0 % 0 % Rate of 1,45 % autonomous
surface from the horizontal plane to the lens front surface optical centre optical surface plane to the lens front the horizontal from surface centre optical surface plane to the lens front the horizontal from surface transparent material, whether or not with an adhesive layer, covered on one side or on both sides or on one side covered layer, an adhesive with not or whether material, transparent film with a release whether or not possessing plates, or prism sheets, unprinted diffuser reflector Optical, diffuser, cut specifically polarising properties, sides: both on finished lens, eyeglass corrective uncut Round organic — of 4,9 cm or more but not than 8,2 of a diameter cm, — of a height of 0,5 more but not than 1,8 cm or more cm, measured when the lens is laid on a flat of a kind to be adapted a pair of glasses used to be processed in order — of 5,9 cm or more but not than 8,5 of a diameter cm — of a height of 1,2 more but not than 3,5 cm or more cm, measured when the lens is laid on a flat of a kind to be adapted a pair of glasses used to be processed in order material lens and another chalcogenide glass transmitting infrared combination of Description whether or not consisting of a polarising film, on rolls, supported Material on one or both sides by side: one on finished blanks, lens a eyeglass or corrective glass, uncut chalcogenide organic transmitting Round infrared moulded from made elements optical Unmounted 20 30 55 30 10 30 25 TARIC
CN code ex 9001 20 00 ex 9001 90 00 ex 9001 50 49 ex 9001 90 00 ex 9001 20 00 *ex 9001 50 41 *ex 9001 50 80 ______
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 239
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2017 31.12.2018 31.12.2019 31.12.2016 31.12.2020 31.12.2018 31.12.2020 Unit Supplementary p/st p/st - - - p/st - - -
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m μ 0 % 0 and a prism pitch of 50 pitch and a prism
o
m according to ASTM D2103,
) 1 μ m, for use in the manufacture of manufacture the use in m, for μ
m, )
1 μ 0 % 0
)
1 0 % 0 m or more but not than 5 μ
)
1 — providing a picture from 50 clear m to infinity, — of 3° of vision × sizes 2,25° with fields and 9° × 6,75°, g, 230 than more not of weight a — with mm, 88 than more not of length a — with coating and a contrast filter with a pitch of not more than 0,65 coating and filter a contrast ( front projection screens having on resin with a prism angle of 90 one side prisms of acrylic ( facture of plasma display modules cut, not or — whether printed, not or — whether ( screen TVs of backlight flat units for use for in the manufacture comprising a combination of between 4 of 120 lenses with and a diameter 8 glass or methacrylic magnesium a one side with least on lens coated but not more than 180 at mm, each mm or more ( fluoride layer, for use in the of manufacture video projectors Infrared lens with motorised focus adjustment, 3 of wavelengths — using Description Rod of neodymium-doped yttrium-aluminium garnet (YAG) material, polished at both ends both plate at plastic polished lenticular material, a (YAG) 300 comprising garnet rolls than screen, yttrium-aluminium in less projection neodymium-doped sheets of Rear of diffuser thickness Rod or a Reflector with film side a front including structures, a back with a minimum of 5 side reflector, Optical film multi-layer terephthalate) Poly(ethylene use coating, for in the manu printing and film comprising glass panels with special Front filter Light guide panel made of poly(methyl methacrylate): Adjustable lens unit, having a focal length of 90 mm or more but not more than 180 mm and 15 10 35 45 60 65 70 75 85 10 TARIC CN code ex 9002 11 00 ex 9002 19 00 ex 9001 90 00 ex 9001 90 00 ex 9001 90 00 ex 9001 90 00 ex 9001 90 00 ex 9002 11 00 ex 9001 90 00 *ex 9001 90 00
M5 M4 ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 240
review mandatory End date for End date
31.12.2017 31.12.2017 31.12.2017 31.12.2018 Unit Supplementary - - - -
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
1
than 200 mm, mm — 50 mm, x 55 mm x 80 mm than not more measuring — and with a resolution of 160 or better, lines/mm times, 18 of ratio zoom a — with of a kind image cameras or live the production used for of visualizers more of length focal maximum a at 100 mm — x 100 mm x 180 mm than more not measuring — and with a resolution of 130 or better, lines/mm times 18 of ratio zoom a — with of a kind image cameras or live the production used for of visualizers — than 125 not measuring more mm x 65 mm x 65 mm, — and with a resolution of 125 or better, lines/mm times 16 of ratio zoom a — with of a kind image cameras or live the production used for of visualizers — length having of 25 but a focal mm or more not more than 150 mm, — than 190 but not more of 60 mm or more with a diameter lenses, or plastic consisting of glass — with a diameter of not more than 46 mm, 46 than more not of diameter a — with — athermalised, ( for use in the manufacture of imaging binoculars, thermal cameras, infrared weapons scopes Description Lenses Lenses Lenses unit: Lens 20 30 40 50 TARIC CN code ex 9002 11 00 ex 9002 11 00 ex 9002 11 00 ex 9002 11 00
M4 M5 ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 241
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2017 31.12.2017 31.12.2019 31.12.2018 Unit Supplementary - - - p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1
)
1
or better, and or better,
2
)
1 200 mm, — measuring not more than 180 mm×100 mm×100 mm at a maximum focal length of more than mm steradian 7 of etendue an — with — of view range 58,5 a field deg or more, but not than 194 more deg, — length of 1,16 a focal mm or more, but than not more 3,88 mm, — of F/2.0 but than or more not more aperture 2.6, a relative — of 17 but mm or more not more than 18,5 a diameter mm, ( of CMOS for use in the manufacture automotive cameras ( heading 8528 within products falling of manufacture the in use for frame, metal mounted on a of F2.0 aperture and relative of not a more diameter than 33 mm, for use of in the manufacture ( cameras charged-coupled (CCD) plates plastic 2 between embedded 1,15 mm, than more not but more or 0,85 mm of transmitting chalcogenide glass and another lens material — with a zoom ratio of 16 times 16 of ratio zoom a — with of a kind image cameras or live the production used for of visualizers Description Lenses with: assembly Lens consisting of Filter, a plastic polarising membrane, glass film, plate and protective a transparent a with 0,4 mm), (± mm 8 or 0,19 mm) (± 3,8 mm of length focal fixed mounted, having a Lens, Optical unit, comprising 1 of lenses and in the or 2 form with a diameter rows of optical glass fibres Mounted chalcogenide transmitting lenses made glass, or a from infrared combination of infrared 70 80 10 20 30 40 TARIC CN code ex 9002 11 00 ex 9002 20 00 ex 9002 90 00 ex 9002 90 00 ex 9002 90 00 ex 9002 11 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 242
review mandatory End date for End date
31.12.2016 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2019 Unit Supplementary p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
) 1
)
1 connectors in a hermetic housing, connectors in a hermetic 560 than not more but more 515 nm or 665 nm; Green: than more but not more 600 Red: nm or nm; Blue: 435 than 475 but not nm more or more nm, but not more than 5nm on structures ductor technology, components in three-dimensional with mechanical arranged the semiconductor material not more than 200 W than not more ( devices or conductor wafers devices ( — diodes and submount electric on elements laser consisting of one a metal with optical or more — crystal, Niobate (PPLN) Poled Lithium or a Periodically with or without mirrors — with an optical output power of 1W or more but not more than 50W, colour: the on depending range exact an within wavelengths central emitting of capable — only more or 1nm by parted mutually bins wavelength spaced closely more or two in operational — and combination of: a of consisting boards, mainly (ASIC), circuits integrated application-specific monolithic more or — one — one or more sensor microelectromechanical elements (MEMS) manufactured with semicon of a kind incorporation into products of Chapters 84-90 used and for 95 Description Energy filters, to be installed on the column of electron microscopes electron of column the on installed be to filters, Energy but more, or 12 W of having an output power by high frequency, stimulated laser, Carbon dioxide conductor module laser of Laser head assemblies for use in the manufacture of measuring or checking machines for semi green printing or automatic or semiconductor wafers of measuring or checking machines for for use in the manufacture Laser blue the Red, for suitable housing a in micro-mirror semiconductor Electronic 10 10 20 30 40 10 TARIC CN code ex 9013 20 00 ex 9013 20 00 ex 9013 20 00 ex 9013 80 90 ex 9012 90 *ex 9013 20 00
M4 ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 243
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2019 Unit Supplementary p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
nology, with mechanical components arranged in three-dimensional structures on the semicon the on structures three-dimensional in arranged components mechanical nology, with ductor material, conductor technology, on with mechanical components structures arranged in three-dimensional the semiconductor material organic compounds, containing: on structures ductor technology, components in three-dimensional with mechanical arranged the semiconductor material, fully automated printed circuit board (PCB) assembly, fully automated printed circuit with the following main components: and (ASIC) circuits integrated application-specific more or one of combination — a tech semiconductor with manufactured (MEMS) sensors micro-electromechanical more or — one of a kind in of products chapters 84-90 used falling in the manufacture and 94 of amorphous covered with a film silicon, coated with a scintillator transistors, of thin-film matrix of amorphous or coated with a layer layer, protective iodide and of caesium a metallised layer selenium semi and (ASIC) circuits integrated with application-specific monolithic more or one manufactured of combination — a (MEMS) elements sensor microelectromechanical more or one least — at volatile or humidity, compensation), temperature for (also temperature, pressure, — Atmospheric — printing of conductor Die technology, in a housing boards automatic or Bare for the suitable (ASIC), circuits integrated application-specific monolithic more or — one — one or more sensor microelectromechanical elements (MEMS) manufactured with semicon of a kind incorporation into products of Chapters 84-90 used and for 95 Description Electronic compass, as a geomagnetic sensor, in a housing (e.g. CSWLP, LGA, SOIC) suitable for suitable SOIC) LGA, CSWLP, a (e.g. with housing plate a glass in a sensor, of geomagnetic consisting a sensors) as sensors/x-ray of compass, panel consisting Electronic flat mainly (x-ray housing, apparatus a x-ray in quantities: for sensor following Panels pressure the semiconductor of barometric two Electronic least at measuring for sensor semiconductor Electronic 30 10 30 50 TARIC
CN code ex 9022 90 00 ex 9025 80 40 ex 9014 10 00 *ex 9025 80 40 ______
M5 M4 ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 244
review mandatory End date for End date
31.12.2019 31.12.2019 31.12.2018 31.12.2019 31.12.2018 Unit Supplementary - p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous , CC
)
1
for use in the manufacture of vehicles of Chapter 87 ( of vehicles Chapter 87 for use in the manufacture ceramic element in a metal housing equipped with vehicle motor a in rotation wheels measuring for effect Hall the using Speed sensor a and mounting of joining connector a holders with connecting cable housing to and attached plastic kind of goods used in the manufacture of Chapter 87 Clustered instrument panel control board, with the microprocessor stepping motors and LED indi cators showing at least: — speed, revolutions, — engine temperature, — engine level fuel — the goods of manufacture the kind used in a protocols, of CAN-BUS and K-LINE communicating via of Chapter 87 or combined with one not or whether quartz, monocrystalline a of form the in sensor rate one yaw more measuring sensors, the whole contained in housing a casing, outer plastic moulded — a — voltage of the control unit 4,5 an operational or more, but than 7 not more V Description Sensor element for gas or smoke analysis in motor vehicles, essentially consisting of a zirconium- a of consisting essentially vehicles, motor in analysis smoke or gas for element Sensor with: sensor, position Apparatus for measuring the angle and of rotation motor vehicles, consisting of at least direction camshaft Semiconducting 30 10 80 20 10 30 40 TARIC
CN code ex 9029 20 31 ex 9031 80 38 ex 9029 90 00 ex 9031 80 34 ex 9031 80 34 ex 9027 10 90 *ex 9029 10 00 ______
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 245
review mandatory End date for End date
31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2019 Unit Supplementary p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
ductor technology, with mechanical components arranged in three-dimensional structures on structures ductor technology, components in three-dimensional with mechanical arranged the semiconductor material containing: — consisting of two non-electrically connected integrated circuits, a top die and a bottom die, circuits, connected integrated — consisting of two non-electrically — frame, lead a top and bottom of positioned on the housing, semiconductor a — in for use measuring angles, as a means for positions in and cars currents whole and one sensors, the contained in a housing or more passive elements — in a housing, circuit and a monolithic integrated — circuit to the integrated connected SMD in parallel capacitors one or more discrete magnets permanent integrated with not or — whether for detecting the movement of a pulse generator and (ASIC) circuits integrated application-specific monolithic more or one of combination — a — one or more sensor microelectromechanical elements (MEMS) manufactured with semicon of a kind incorporation into products under used Chapter 84-90 for and 95 sensor; field magnetic a with combination in not or — whether — printing of conductor Die technology, in a housing boards automatic or Bare for the suitable Description Acceleration measurement device for automotive applications, comprising one or more active and/or active more of: or sensor consisting one Hall sensor), comprising linear speed applications, dual wheel automotive Programmable (semi-conductor for vehicles device in measurement speed Acceleration wheel of measuring consisting for mainly Device housing, a in rate: accelerometer angular semiconductor and/or Electronic acceleration measuring for sensor semiconductor Electronic 50 10 15 20 25 TARIC CN code ex 9031 80 38 ex 9031 80 38 ex 9031 80 34 *ex 9031 80 38 *ex 9031 80 38
M5 M4 M5 M4 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 246
review mandatory End date for End date
31.12.2019 31.12.2019 31.12.2019 31.12.2019 Unit Supplementary p/st p/st p/st p/st
duty 0 % 0 % 0 % Rate of autonomous 0 % 0
ductor technology, with mechanical components arranged in three-dimensional structures on structures ductor technology, components in three-dimensional with mechanical arranged the semiconductor material, ductor technology, with mechanical components arranged in three-dimensional structures on structures ductor technology, components in three-dimensional with mechanical arranged the semiconductor material, printing of conductor boards, mainly consisting of a combination of: and (ASIC) circuits integrated application-specific monolithic more or — one — one or more sensor microelectromechanical elements (MEMS) manufactured with semicon of a kind incorporation into products under used Chapter 84-90 for and 95 and deformation during potential electrical an generating for crystal piezoelectric — a holder metal with box plastic — a of a kind of goods used in the manufacture of Chapter 87 ‘G’ and providing the airbags, of a evaluation acceleration of triggering kind the values for further of goods used in the manufacture of Chapter 87 — one or more monolithic application-specific integrated circuits (ASIC), circuits integrated application-specific monolithic more or — one — one or more sensor microelectromechanical elements (MEMS) manufactured with semicon microcontroller integrated an with not or — whether of a kind incorporation into products of Chapters 84-90 used and for 95 Description Combined electronic acceleration- and geomagnetic sensor, in a housing suitable for the automatic the for suitable housing a in sensor, geomagnetic and comprising acceleration- axis electronic vertical monitoring Combined vehicle for the plastic, of in cameras acceleration together automotive lateral moulded in measuring connector, lenses for testing and sensor quality board Gyroscopic image circuit and printed calibrating sensor, for Acceleration Machine Test Functional 30 50 70 30 TARIC
CN code ex 9031 80 38 ex 9031 80 38 ex 9031 80 98 *ex 9031 80 38 ______
M4 M5 M4 M5 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 247
review mandatory End date for End date
31.12.2018 31.12.2018 31.12.2018 31.12.2017 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2020 Unit Supplementary p/st p/st p/st p/st p/st p/st p/st p/st - p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
0 % 0
)
0 % 0 1
)
1
)
1
) 1 charge-coupled image (CCD) sensor, the whole contained in a housing of 80 voltage of 30 mOhm resistance V, having contact a typical ( facture of reclining car seats ( seats car reclining of manufacture the used in 2,5 mm seats ( liner and without foam padding, reworking after (stitching of the and leather embroidery appli of seats motor vehicles used cation) in manufacture 3,0 mm (± 0,2 420 of a length or more but not than 600 1 mm), of 1 mm) mm (± mm (± ( of goods mm), for the manufacture of heading 8528 light engine of 3 of a series or more but not one more than 9 chip red green and specific blue light emitting diodes mounted on a PCB, with light coupled TV and/or back to the set front of the flat Description Electronic controller of electric power steering (EPS controller) (EPS gases steering and power liquids electric lamination controlling and a filters comprising optical circuit a printed of sensor, in the form align a laser Assembly for of for scrim-reinforced controller controller a Automotive airbag shock-sensor, comprising a contact capable of switching a current of 12 A at a Electronic valve with Digital lined leather, seats Ratchet disk car of a kind used of reclining in the manufacture bovine perforated of with a thickness of 0,8 Sidemember mm or more but not more than 3,0 mm, used in the manu made headrest a seats with thickness of 1 for mounting mm or more but bracket features not more than Steel safety of part car adjustment mechanism used of reclining controlling the seat in handles for the manufacture Steel Outer of tubes (RBG) of a diameter containing 3 fluorescent light assembly of synthetic material Electric Ambient light module with a length of 300 mm or more but not more than 600 mm, based on a 20 20 30 40 10 20 30 40 60 10 10 TARIC
CN code ex 9401 90 80 ex 9032 89 00 ex 9032 89 00 ex 9032 89 00 ex 9401 90 80 ex 9405 40 35 ex 9405 40 39 ex 9031 90 85 *ex 9401 90 80 *ex 9401 90 80 *ex 9401 90 80 ______
M5 M4 M4 ▼ ▼ ▼ 02013R1387 — EN — 01.07.2016 — 005.001 — 248
review mandatory End date for End date
◄
31.12.2018 31.12.2020 31.12.2020 31.12.2020 31.12.2018 31.12.2018 31.12.2018 Unit Supplementary p/st p/st - - - - -
duty 0 % 0 % 0 % Rate of autonomous
emical Substances) tool managed is an information by the European uropean Parliament and of the Council and laying down uropean of Parliament the Union Customs description is modified by Regulation. this description is 0 % 0 )
1 of the European and Parliament of the Council of 9 October 2013 laying down id down in Articles 55 and 56 of Commission 55 2015/ and 56 of Implementing Regulation (EU) down Articles id in s. 0 % 0
)
1 0 % 0
0 % 0
)
1
◄
◄ green LED chips, green LED and — module 38,6 measuring an LED matrix mm × 20,6 mm (± 0,1 equipped mm), with 128 red and — board, Thermistor equipped Coefficient printed circuit with a Negative Temperature a flexible ( Plastic cable car scale models, whether or not with a motor, for printing ( metal for use in the manufacture of zippers dye-sublimation) a support (so called Description Narrow strips mounted with plastic chain scoops for use in the manufacture of zippers ( zippers of containing: manufacture silicone, the white in of use array for canal LED scoops internal chain without canal plastic markers, internal with for an mounted porous-tips with strips other pen-tips with mounted narrow tape teeth, pin/boxes Sliders, of base zipper of slide fasteners, and other parts Narrow and plastic tips Non-fibrous Felt colours, providing Ribbons of dyes the penetration by with segments of different heat into of plastic 10 10
duty is suspended. The specific duty shall continue to apply. continue to duty shall suspended. duty is specific The ◄
20 10 10 10 20 10 TARIC ad valorem 2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the E the 952/2013 No of (EU) Regulation provisions of certain implementing for 24 rules 2447 of down detailed November 2015 laying L Code (OJ 343, 29.12.2015, p. 558). the Union Customs Code (OJ L 269, 10.10.2013, p. 1). ) Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation No 952/2013 (EU) ) A surveillance of imports goods suspension covered shall be established in accordance with by the procedure la this tariff
1 4 CN code ______
( ( * Suspension to a product relating in the Annex to Regulation (EU) No 1344/2011 which for the CN or TARIC code or the product ex 9607 20 10 ex 9608 91 00 ex 9503 00 95 ex 9607 20 90 ex 9608 91 00 ex 9612 10 ex 9405 40 39 Commission, General Directorate for Taxation Commission, for and Customs General Directorate Union. More information can be found via the following link: http://ec.europa.eu/taxation_customs/common/databases/ecics/index_en.htm. *ex 9503 00 75 M5 M5 M5 M5 ) However, the suspension duties does not of tariff apply where the processing out or catering undertaking by carried is retail the ) Only Ch (European Customs Inventory of ECICS (product). ECICS record each assigned to is Number) ) CUS (Customs Union and Statistics ) The to the production expression assembly’refers ‘industrial of new in an items assembly plant or manufacturing plant.
2 3 5 6 ► ( ► ( ► ( ( ►
M5 M4 M4 ▼ ▼ ▼