Command Line Interface Quick Reference Guide
Sun Storage Fibre Channel Switch 5802 / Firmware Version 7.4
This guide provides a quick alphabetical listing of commands and the options for the Sun Storage Fibre Channel Switch 5802 command line interface. This guide is intended for individuals who are responsible for installing and servicing Fibre Channel equipment using the command line interface. admin exit start (or begin) fcping destination [address] end (or stop) count [number] cancel timeout [seconds] alias fctrace [port_source] [port_destination] [hop_count] add [alias] [member_list] copy [alias_source] [alias_destination] feature create [alias] add [license_key] delete [alias] log list firmware install members [alias] group remove [alias] [member_list] add [group] rename [alias_old] [alias_new] copy [group_source] [group_destination] callhome create [group] [type] cancel delete [group] changeover edit [group] [member] clear list edit members [group] history remove [group] [member_list] list profile [profile] rename [group_old] [group_new] queue [option] securitysets [group] save type [group] test profile [profile] hardreset capture help [command] [keyword] add edit history remove hotreset config image activate [config_name] cleanup backup fetch [account_name] [ip_address] [file_source] cancel [file_destination] copy [config_source] [config_destination] install delete [config_name] list edit [config_name] tftp [ip_address] [file_source] [file_destination] list unpack [file] restore save [config_name] create certificate support date [MMDDhhmmCCYY] ipsec security cancel active clear cancel edit clear history edit limits history save limits ipsec association list restore copy [association_source] save [association_destination] create [association] securityset delete [association] activate [security_set] edit [association] active list [association] add [security_set] [group_list] rename [association_old] [association_new] copy [security_set_source] [security_set_destination] ipsec list create [security_set] active deactivate delete association [option] [security_set] configured groups [security_set] edited list remove policy [option] [security_set] [group] rename [security_set_old] [security_set_new] copy [policy_source] [policy_destination] set alarm create [policy] [option] delete [policy] set beacon [state] edit [policy] set config port [port_number] list [option] rename [policy_old] [policy_new] set config ports [port_number] lip [port_number] set config security logout set config security passwd [account_name] set config switch ping set config threshold [host_name] set config zoning -ipv4 [host_address] set log -ipv6 [host_address] archive portbinding [port_number] clear profile component [filter_list] copy [profile_source] [profile_destination] display [filter] create [profile] level [filter] delete [profile] port [port_list] edit [profile] restore rename [profile_old] [profile_new] save start (default) ps stop quit pagebreak [state] reset set port clear callhome config [config_name] set port [port_number] factory clear ipsec license [destination] port [port_list] speed [transmission_speed] radius state [state] security set setup callhome services set setup radius snmp common switch (default) server [server_number] system zoning set setup services set setup snmp show port common [port_list] trap [trap_number] show post log set setup system show setup callhome dns ipv4 show setup mfg ipv6 show setup radius logging common ntp server [server_number] timers show setup services set switch state [state] show setup snmp set timezone common show about trap [trap_number] show alarm settings show setup system dns show broadcast ipv4 show chassis ipv6 logging show config port [port_number] ntp show config security timers show config security portbinding [port_number] show steering [domain_id] show config switch show switch show config threshold show system show config zoning show test log show domains show timezone show donor show topology [port_number] show fabric brief show users brief show fdmi [port_wwn] show version show interface shutdown show log snmpv3user [number_of_events] add component delete [account] display [filter] edit level list options port test cancel settings port [port_number] show lsdb test port [port_number] offline [loopback_type] show media online [port_list] all test status installed port [port_number] test switch show mem [count] connectivity [loopback_type] show ns [option] offline [loopback_type] show pagebreak online show perf [port_list] uptime show perf user byte [port_list] accounts inbyte [port_list] add outbyte [port_list] delete [account_name] frame [port_list] edit inframe [port_list] list outframe [port_list] whoami errors [port_list] zone zones [zone_set] add [zone] [member_list] zoning active capture copy [zone_source] [zone_destination] create [zone] zoning cancel delete [zone] zoning clear list zoning configured members [zone] orphans zoning delete orphans remove [zone] [member_list] zoning edit [database] rename [zone_old [zone_new] zoning edited zonesets [zone] zoning history zoneset activate [zone_set] zoning limits brief active zoning list add [zone_set] [zone_list] zoning merged captured copy [zone_set_source] [zone_set_destination] create [zone_set] zoning restore deactivate zoning save delete [zone_set] list remove [zone_set] [zone_list] rename [zone_set_old] [zone_set_new]
Accessing Sun Documentation You can view, print, or purchase a broad selection of Sun documentation, including localized versions, at: http://www.sun.com/documentation
Third-Party Web Sites Sun is not responsible for the availability of third-party web sites mentioned in this document. Sun does not endorse and is not responsible or liable for any content, advertising, products, or other materials that are available on or through such sites or resources. Sun will not be responsible or liable for any actual or alleged damage or loss caused by or in connection with the use of or reliance on any such content, goods, or services that are available on or through such sites or resources.
Contacting Sun Technical Support If you have technical questions about this product that are not answered in this document, go to: http://www.sun.com/service/contacting
Sun Welcomes Your Comments Sun is interested in improving its documentation and welcomes your comments and suggestions. You can submit your comments by going to: http://www.sun.com/hwdocs/feedback Please include the title and part number of your document with your feedback: Command Line Interface Quick Reference Guide, part number 820-4962-10
Copyright 2008 Sun Microsystems, Inc. All rights reserved. Sun, Sun Microsystems, the Sun logo, Java, AnswerBook2, docs.sun.com, StorageTek, and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc., or its subsidiaries, in the U.S. and in other countries. Copyright 2008 Sun Microsystems, Inc. Tous droits réservés. Sun, Sun Microsystems, le logo Sun, Java, AnswerBook2, docs.sun.com, StorageTek, et Solaris sont des marques de fabrique ou des marques déposées de Sun Microsystems, Inc., ou ses filiales, aux États-Unis et dans d’autres pays.
Sun Microsystems, Inc. www.sun.com
Part No. 820-4962-10, Rev. A September 2008