DOCSLIB.ORG

Configuration and Administration of Networking for Fedora 23

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Configuration and Administration of Networking for Fedora 23 Fedora 23 Networking Guide Configuration and Administration of Networking for Fedora 23 Stephen Wadeley Networking Guide Draft Fedora 23 Networking Guide Configuration and Administration of Networking for Fedora 23 Edition 1.0 Author Stephen Wadeley [email protected] Copyright © 2015 Red Hat, Inc. and others. The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. The original authors of this document, and Red Hat, designate the Fedora Project as the "Attribution Party" for purposes of CC-BY-SA. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version. Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law. Red Hat, Red Hat Enterprise Linux, the Shadowman logo, JBoss, MetaMatrix, Fedora, the Infinity Logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries. For guidelines on the permitted uses of the Fedora trademarks, refer to https://fedoraproject.org/wiki/ Legal:Trademark_guidelines. Linux® is the registered trademark of Linus Torvalds in the United States and other countries. Java® is a registered trademark of Oracle and/or its affiliates. XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries. MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries. All other trademarks are the property of their respective owners. The Networking Guide documents relevant information regarding the configuration and administration of network interfaces, networks and network services in Fedora 23. It is oriented towards system administrators with a basic understanding of Linux and networking. This book is based on the Deployment Guide from Red Hat Enterprise Linux 6. The chapters related to networking were taken from the Deployment Guide to form the foundation for this book. Draft Draft Preface vii 1. Target Audience ............................................................................................................ vii 2. About This Book ............................................................................................................ vii 3. How to Read this Book .................................................................................................. vii 4. Document Conventions ................................................................................................. viii 4.1. Typographic Conventions .................................................................................... viii 4.2. Pull-quote Conventions ......................................................................................... x 4.3. Notes and Warnings ............................................................................................. x 5. Feedback ....................................................................................................................... xi 6. Acknowledgments ........................................................................................................... xi I. Networking 1 1. Introduction to Fedora Networking 3 1.1. How this Book is Structured .................................................................................. 3 1.2. Introduction to NetworkManager ............................................................................ 3 1.3. Installing NetworkManager .................................................................................... 4 1.3.1. The NetworkManager Daemon ................................................................... 4 1.3.2. Interacting with NetworkManager ................................................................ 4 1.4. Network Configuration Using the Command Line Interface (CLI) .............................. 5 1.5. Network Configuration Using NetworkManager's CLI (nmcli) .................................... 5 1.6. NetworkManager and the Network Scripts ............................................................. 5 1.7. Network Configuration Using sysconfig Files .......................................................... 7 1.8. Additional Resources ............................................................................................ 8 1.8.1. Installed Documentation ............................................................................. 8 2. Configure Networking 9 2.1. Static and Dynamic Interface Settings ................................................................... 9 2.1.1. When to Use Static Network Interface Settings ............................................ 9 2.1.2. When to Use Dynamic Interface Settings .................................................... 9 2.1.3. Selecting Network Configuration Methods ................................................... 9 2.2. Using NetworkManager with the GNOME Graphical User Interface ........................ 10 2.2.1. Connecting to a Network Using a GUI ...................................................... 10 2.2.2. Configuring New and Editing Existing Connections ..................................... 10 2.2.3. Connecting to a Network Automatically ..................................................... 11 2.2.4. System-wide and Private Connection Profiles ............................................ 12 2.2.5. Configuring a Wired (Ethernet) Connection ................................................ 13 2.2.6. Configuring a Wi-Fi Connection ................................................................ 14 2.2.7. Establishing a VPN Connection ................................................................ 16 2.2.8. Establishing a Mobile Broadband Connection ............................................ 19 2.2.9. Establishing a DSL Connection ................................................................ 21 2.2.10. Configuring Connection Settings ............................................................. 23 2.3. Using the Command Line Interface (CLI) ............................................................. 30 2.3.1. Configuring a Network Interface Using ifcfg Files ....................................... 30 2.3.2. Configuring a Network Interface Using ip Commands ................................. 31 2.3.3. Static Routes and the Default Gateway ..................................................... 32 2.3.4. Configuring Static Routes in ifcfg files ....................................................... 33 2.3.5. Configuring IPv6 Tokenized Interface Identifiers ......................................... 35 2.4. Using the NetworkManager Command Line Tool, nmcli ......................................... 36 2.4.1. Understanding the nmcli Options .............................................................. 38 2.4.2. Connecting to a Network Using nmcli ........................................................ 39 2.4.3. Configuring Static Routes Using nmcli ....................................................... 44 2.5. Additional Resources .......................................................................................... 45 2.5.1. Installed Documentation ........................................................................... 45 iii Networking Guide Draft 2.5.2. Online Documentation .............................................................................. 45 3. Configure Host Names 47 3.1. Understanding Host Names ................................................................................ 47 3.1.1. Recommended Naming Practices ............................................................. 47 3.2. Configuring Host Names Using hostnamectl ......................................................... 47 3.2.1. View All the Host Names ......................................................................... 47 3.2.2. Set All the Host Names ........................................................................... 48 3.2.3. Set a Particular Host Name ...................................................................... 48 3.2.4. Clear a Particular Host Name ................................................................... 48 3.2.5. Changing Host Names Remotely .............................................................. 48 3.3. Configuring Host Names Using nmcli ................................................................... 48 3.4. Additional Resources .......................................................................................... 49 3.4.1. Installed Documentation ........................................................................... 49 3.4.2. Online Documentation .............................................................................. 49 4. Configure Network Bonding 51 4.1. Understanding the Default Behavior of Master and Slave Interfaces ....................... 51 4.2. Creating a Bond Connection Using a GUI ............................................................ 51 4.2.1. Establishing a Bond Connection ............................................................... 52 4.3. Using the Command Line Interface (CLI) ............................................................. 55 4.3.1. Check if Bonding Kernel Module is Installed .............................................. 55 4.3.2. Create a Channel Bonding Interface ........................................................
Load more

Recommended publications
  • Autocad Command Aliases
    AutoCAD and Its Applications Advanced Appendix D AutoCAD Command Aliases Command Alias 3DALIGN 3AL 3DFACE 3F 3DMOVE 3M 3DORBIT 3DO, ORBIT, 3DVIEW, ISOMETRICVIEW 3DPOLY 3P 3DPRINT 3DP, 3DPLOT, RAPIDPROTOTYPE 3DROTATE 3R 3DSCALE 3S 3DWALK 3DNAVIGATE, 3DW ACTRECORD ARR ACTSTOP ARS -ACTSTOP -ARS ACTUSERINPUT ARU ACTUSERMESSAGE ARM -ACTUSERMESSAGE -ARM ADCENTER ADC, DC, DCENTER ALIGN AL ALLPLAY APLAY ANALYSISCURVATURE CURVATUREANALYSIS ANALYSISZEBRA ZEBRA APPLOAD AP ARC A AREA AA ARRAY AR -ARRAY -AR ATTDEF ATT -ATTDEF -ATT Copyright Goodheart-Willcox Co., Inc. Appendix D — AutoCAD Command Aliases 1 May not be reproduced or posted to a publicly accessible website. Command Alias ATTEDIT ATE -ATTEDIT -ATE, ATTE ATTIPEDIT ATI BACTION AC BCLOSE BC BCPARAMETER CPARAM BEDIT BE BLOCK B -BLOCK -B BOUNDARY BO -BOUNDARY -BO BPARAMETER PARAM BREAK BR BSAVE BS BVSTATE BVS CAMERA CAM CHAMFER CHA CHANGE -CH CHECKSTANDARDS CHK CIRCLE C COLOR COL, COLOUR COMMANDLINE CLI CONSTRAINTBAR CBAR CONSTRAINTSETTINGS CSETTINGS COPY CO, CP CTABLESTYLE CT CVADD INSERTCONTROLPOINT CVHIDE POINTOFF CVREBUILD REBUILD CVREMOVE REMOVECONTROLPOINT CVSHOW POINTON Copyright Goodheart-Willcox Co., Inc. Appendix D — AutoCAD Command Aliases 2 May not be reproduced or posted to a publicly accessible website. Command Alias CYLINDER CYL DATAEXTRACTION DX DATALINK DL DATALINKUPDATE DLU DBCONNECT DBC, DATABASE, DATASOURCE DDGRIPS GR DELCONSTRAINT DELCON DIMALIGNED DAL, DIMALI DIMANGULAR DAN, DIMANG DIMARC DAR DIMBASELINE DBA, DIMBASE DIMCENTER DCE DIMCONSTRAINT DCON DIMCONTINUE DCO, DIMCONT DIMDIAMETER DDI, DIMDIA DIMDISASSOCIATE DDA DIMEDIT DED, DIMED DIMJOGGED DJO, JOG DIMJOGLINE DJL DIMLINEAR DIMLIN, DLI DIMORDINATE DOR, DIMORD DIMOVERRIDE DOV, DIMOVER DIMRADIUS DIMRAD, DRA DIMREASSOCIATE DRE DIMSTYLE D, DIMSTY, DST DIMTEDIT DIMTED DIST DI, LENGTH DIVIDE DIV DONUT DO DRAWINGRECOVERY DRM DRAWORDER DR Copyright Goodheart-Willcox Co., Inc.
    [Show full text]
  • CS101 Lecture 9
    How do you copy/move/rename/remove files? How do you create a directory ? What is redirection and piping? Readings: See CCSO’s Unix pages and 9-2 cp option file1 file2 First Version cp file1 file2 file3 … dirname Second Version This is one version of the cp command. file2 is created and the contents of file1 are copied into file2. If file2 already exits, it This version copies the files file1, file2, file3,… into the directory will be replaced with a new one. dirname. where option is -i Protects you from overwriting an existing file by asking you for a yes or no before it copies a file with an existing name. -r Can be used to copy directories and all their contents into a new directory 9-3 9-4 cs101 jsmith cs101 jsmith pwd data data mp1 pwd mp1 {FILES: mp1_data.m, mp1.m } {FILES: mp1_data.m, mp1.m } Copy the file named mp1_data.m from the cs101/data Copy the file named mp1_data.m from the cs101/data directory into the pwd. directory into the mp1 directory. > cp ~cs101/data/mp1_data.m . > cp ~cs101/data/mp1_data.m mp1 The (.) dot means “here”, that is, your pwd. 9-5 The (.) dot means “here”, that is, your pwd. 9-6 Example: To create a new directory named “temp” and to copy mv option file1 file2 First Version the contents of an existing directory named mp1 into temp, This is one version of the mv command. file1 is renamed file2. where option is -i Protects you from overwriting an existing file by asking you > cp -r mp1 temp for a yes or no before it copies a file with an existing name.
    [Show full text]
  • Red Hat Enterprise Linux 7 Technical Overview
    RED HAT ENTERPRISE LINUX 7 TECHNICAL OVERVIEW Ingo Börnig Senior Solutions Architect, Red Hat 2014-07-08 1 RED HAT ENTERPRISE LINUX 7 | JUNE 2014 AGENDA 1 RED HAT ENTERPRISE LINUX 7 INTRODUCTION 2 LIGHTWEIGHT APPLICATION ISOLATION 3 WINDOWS INTEROPERABILITY 4 FILE SYSTEMS AND STORAGE 5 OPTIMAL PERFORMANCE MANAGEMENT 6 INSTALLATION AND DEPLOYMENT 2 RED HAT ENTERPRISE LINUX 7 | JUNE 2014 AGENDA (cont.) 7 SYSTEM MANAGEMENT AND FEATURES 8 VIRTUALIZATION 9 DESKTOP AND DEVELOPER FEATURES 10 SUMMARY 3 RED HAT ENTERPRISE LINUX 7 | JUNE 2014 RED HAT ENTERPRISE LINUX 7 INTRODUCTION 4 RED HAT ENTERPRISE LINUX 7 | JUNE 2014 RED HAT ENTERPRISE LINUX 7 REDEFINING THE ENTERPRISE OS FLEXIBILITY to STABILITY to efficiently CERTAINTY of quickly adapt to meet challenges of mission-critical demands for datacenter virtualization reliability and business agility and cloud military-grade security 90% OF FORTUNE 500 COMPANIES TRUST RED HAT ENTERPRISE LINUX FOR THEIR CRITICAL BUSINESS INFRASTRUCTURE. 5 RED HAT CONFIDENTIAL | PLATFORM PRODUCT MARKETING RED HAT ENTERPRISE LINUX 7 BASICS ● Based on Fedora 19, the upstream kernel version 3.10 and over 4000 patches (additional features, bugfixes, security errata) ● Supported hardware architectures: ● Intel/AMD 64-bit (x86_64) ● IBM POWER ● IBM System z ● Support for 32-bit applications enabled via inclusion of 32-bit libraries (multilib). 6 RED HAT ENTERPRISE LINUX 7HIGHLIGHTS RED HAT 7 STABLE AND FLEXIBLE EFFICIENT CERTAINTY OF MISSION-CRITICAL RELIABILITY AND MILITARY-GRADE SECURITY MILITARY-GRADE AND RELIABILITY
    [Show full text]
  • Linux Commands Cheat Sheet
    LINUX COMMANDS CHEAT SHEET System File Permission uname => Displays Linux system information chmod octal filename => Change file permissions of the file to octal uname -r => Displays kernel release information Example uptime => Displays how long the system has been running including chmod 777 /data/test.c => Set rwx permissions to owner, group and everyone (every- load average one else who has access to the server) hostname => Shows the system hostname chmod 755 /data/test.c => Set rwx to the owner and r_x to group and everyone hostname -i => Displays the IP address of the system chmod 766 /data/test.c => Sets rwx for owner, rw for group and everyone last reboot => Shows system reboot history chown owner user-file => Change ownership of the file date => Displays current system date and time chown owner-user: owner-group => Change owner and group owner of the file timedatectl => Query and change the System clock file_name chown owner-user:owner-group- => Change owner and group owner of the directory cal => Displays the current calendar month and day directory w => Displays currently logged in users in the system whoami => Displays who you are logged in as Network finger username => Displays information about the user ip addr show => Displays IP addresses and all the network interfaces Hardware ip address add => Assigns IP address 192.168.0.1 to interface eth0 192.168.0.1/24 dev eth0 dmesg => Displays bootup messages ifconfig => Displays IP addresses of all network interfaces cat /proc/cpuinfo => Displays more information about CPU e.g model, model name, cores, vendor id ping host => ping command sends an ICMP echo request to establish a connection to server / PC cat /proc/meminfo => Displays more information about hardware memory e.g.
    [Show full text]
  • Unix/Linux Command Reference
    Unix/Linux Command Reference .com File Commands System Info ls – directory listing date – show the current date and time ls -al – formatted listing with hidden files cal – show this month's calendar cd dir - change directory to dir uptime – show current uptime cd – change to home w – display who is online pwd – show current directory whoami – who you are logged in as mkdir dir – create a directory dir finger user – display information about user rm file – delete file uname -a – show kernel information rm -r dir – delete directory dir cat /proc/cpuinfo – cpu information rm -f file – force remove file cat /proc/meminfo – memory information rm -rf dir – force remove directory dir * man command – show the manual for command cp file1 file2 – copy file1 to file2 df – show disk usage cp -r dir1 dir2 – copy dir1 to dir2; create dir2 if it du – show directory space usage doesn't exist free – show memory and swap usage mv file1 file2 – rename or move file1 to file2 whereis app – show possible locations of app if file2 is an existing directory, moves file1 into which app – show which app will be run by default directory file2 ln -s file link – create symbolic link link to file Compression touch file – create or update file tar cf file.tar files – create a tar named cat > file – places standard input into file file.tar containing files more file – output the contents of file tar xf file.tar – extract the files from file.tar head file – output the first 10 lines of file tar czf file.tar.gz files – create a tar with tail file – output the last 10 lines
    [Show full text]
  • Dig, a DNS Query Tool for Windows and Replacement for Nslookup 2008-04-15 15:29
    dig, a DNS query tool for Windows and replacement for nslookup 2008-04-15 15:29 Disclaimer dig (dig for Windows ) (dig is a powerful tool to investigate [digging into] the DNS system) Source of the binary is from ftp.isc.org Manual Page of dig, in the cryptic Unix style, for reference only. (1) Download: Windows 2000 or Windows XP or Windows Vista ( dig version 9.3.2) Create a folder c:\dig Download this dig-files.zip and save it to c:\dig Use winzip or equivalent to extract the files in dig-files.zip to c:\dig Note: If msvcr70.dll already exists in %systemroot%\system32\ , then you can delete c:\dig\msvcr70.dll Note: Included in dig-files.zip is a command line whois, version 4.7.11: The canonical site of the whois source code is http://ftp.debian.org/debian/pool/main/w/whois/ The whois.exe file inside dig-files.zip is compiled using cygwin c++ compiler. (2) Do a file integrity check (why ? Because some virus checkers destroy dll files) Click Start.. Run ... type CMD (a black screen pops up) cd c:\dig sha1 * You should see some SHA1 hashes (in here, SHA1 hash is used as an integrity check, similar to checksums). Compare your hashes with the following table. SHA1 v1.0 [GPLed] by Stephan T. Lavavej, http://stl.caltech.edu 6CA70A2B 11026203 EABD7D65 4ADEFE3D 6C933EDA cygwin1.dll 57487BAE AA0EB284 8557B7CA 54ED9183 EAFC73FA dig.exe 97DBD755 D67A5829 C138A470 8BE7A4F2 6ED0894C host.exe D22E4B89 56E1831F F0F9D076 20EC19BF 171F0C29 libbind9.dll 81588F0B E7D3C6B3 20EDC314 532D9F2D 0A105594 libdns.dll E0BD7187 BBC01003 ABFE7472 E64B68CD 1BDB6BAB libeay32.dll F445362E 728A9027 96EC6871 A79C6307 054974E4 libisc.dll B3255C0E 4808A703 F95C217A 91FFCD69 40E680C9 libisccfg.dll DFBDE4F9 E25FD49A 0846E97F D813D687 6DC94067 liblwres.dll 61B8F573 DB448AE6 351AE347 5C2E7C48 2D81533C msvcr70.dll BDA14B28 7987E168 F359F0C9 DD96866D 04AB189B resolv.conf 1112343A 319C3EEE E44BF261 AE196C96 289C70E2 sha1.exe 21D20035 2A5B64E2 69FEA407 4D78053F 3C7A2738 whois.exe If your hashes are the same as the above table, then your files pass the integrity check.
    [Show full text]
  • Streamlining Integrated Infrastructure Implementation “Dig Once” Strategy Development Workshop June 9, 2016
    Streamlining Integrated Infrastructure Implementation “Dig Once” Strategy Development Workshop June 9, 2016 Workshop Report February 2017 Sponsored By: Alliance for the Chesapeake Bay Local Government Advisory Committee (LGAC) Funding: National Fish & Wildlife Foundation (NFWF) Prepared By: Alliance for the Chesapeake Bay Hirschman Water & Environment, LLC 1. Workshop Overview and Focus The focus of this workshop was to explore better ways to integrate green infrastructure (GI) into other infrastructure projects, such as roads, school and park improvements, and other capital projects. The workshop was hosted by the Alliance for the Chesapeake Bay (ACB) in conjunction with the Local Government Advisory Committee to the Chesapeake Executive Council (LGAC), with funding from the National Fish & Wildlife Foundation (NFWF). Mary Gattis, Director of Local Government Programs for ACB, was the lead facilitator for the workshop. The workshop was held on June 9, 2016 at the Eisenhower Hotel in Gettysburg, Pennsylvania. The organizers targeted certain sector representatives for attendance in order to achieve the necessary cross-section of experiences and points of view. Figure 1 shows the breakdown of attendees by type of organization. A total of 58 individuals attended the 1-day workshop, 52 participants and six staff representatives. See Appendix A for a list of workshop participants. Prior to the workshop, the following problem statement and workshop goal Figure 1. Representation of 52 Workshop Attendees were sent to attendees as part of the agenda. This was done in order to maintain a clear focus for the workshop, as the topic of green infrastructure has many facets, each of which could fill the entire agenda for a one-day event.
    [Show full text]
  • Chapter 19 RECOVERING DIGITAL EVIDENCE from LINUX SYSTEMS
    Chapter 19 RECOVERING DIGITAL EVIDENCE FROM LINUX SYSTEMS Philip Craiger Abstract As Linux-kernel-based operating systems proliferate there will be an in­ evitable increase in Linux systems that law enforcement agents must process in criminal investigations. The skills and expertise required to recover evidence from Microsoft-Windows-based systems do not neces­ sarily translate to Linux systems. This paper discusses digital forensic procedures for recovering evidence from Linux systems. In particular, it presents methods for identifying and recovering deleted files from disk and volatile memory, identifying notable and Trojan files, finding hidden files, and finding files with renamed extensions. All the procedures are accomplished using Linux command line utilities and require no special or commercial tools. Keywords: Digital evidence, Linux system forensics !• Introduction Linux systems will be increasingly encountered at crime scenes as Linux increases in popularity, particularly as the OS of choice for servers. The skills and expertise required to recover evidence from a Microsoft- Windows-based system, however, do not necessarily translate to the same tasks on a Linux system. For instance, the Microsoft NTFS, FAT, and Linux EXT2/3 file systems work differently enough that under­ standing one tells httle about how the other functions. In this paper we demonstrate digital forensics procedures for Linux systems using Linux command line utilities. The ability to gather evidence from a running system is particularly important as evidence in RAM may be lost if a forensics first responder does not prioritize the collection of live evidence. The forensic procedures discussed include methods for identifying and recovering deleted files from RAM and magnetic media, identifying no- 234 ADVANCES IN DIGITAL FORENSICS tables files and Trojans, and finding hidden files and renamed files (files with renamed extensions.
    [Show full text]
  • “Linux at the Command Line” Don Johnson of BU IS&T  We’Ll Start with a Sign in Sheet
    “Linux at the Command Line” Don Johnson of BU IS&T We’ll start with a sign in sheet. We’ll end with a class evaluation. We’ll cover as much as we can in the time allowed; if we don’t cover everything, you’ll pick it up as you continue working with Linux. This is a hands-on, lab class; ask questions at any time. Commands for you to type are in BOLD The Most Common O/S Used By BU Researchers When Working on a Server or Computer Cluster Linux is a Unix clone begun in 1991 and written from scratch by Linus Torvalds with assistance from a loosely-knit team of hackers across the Net. 64% of the world’s servers run some variant of Unix or Linux. The Android phone and the Kindle run Linux. a set of small Linux is an O/S core programs written by written by Linus Richard Stallman and Torvalds and others others. They are the AND GNU utilities. http://www.gnu.org/ Network: ssh, scp Shells: BASH, TCSH, clear, history, chsh, echo, set, setenv, xargs System Information: w, whoami, man, info, which, free, echo, date, cal, df, free Command Information: man, info Symbols: |, >, >>, <, ;, ~, ., .. Filters: grep, egrep, more, less, head, tail Hotkeys: <ctrl><c>, <ctrl><d> File System: ls, mkdir, cd, pwd, mv, touch, file, find, diff, cmp, du, chmod, find File Editors: gedit, nedit You need a “xterm” emulation – software that emulates an “X” terminal and that connects using the “SSH” Secure Shell protocol. ◦ Windows Use StarNet “X-Win32:” http://www.bu.edu/tech/support/desktop/ distribution/xwindows/xwin32/ ◦ Mac OS X “Terminal” is already installed Why? Darwin, the system on which Apple's Mac OS X is built, is a derivative of 4.4BSD-Lite2 and FreeBSD.
    [Show full text]
  • Unix/Linux Command Reference
    Unix/Linux Command Reference .com File Commands System Info ls – directory listing date – show the current date and time ls -al – formatted listing with hidden files cal – show this month's calendar cd dir - change directory to dir uptime – show current uptime cd – change to home w – display who is online pwd – show current directory whoami – who you are logged in as mkdir dir – create a directory dir finger user – display information about user rm file – delete file uname -a – show kernel information rm -r dir – delete directory dir cat /proc/cpuinfo – cpu information rm -f file – force remove file cat /proc/meminfo – memory information rm -rf dir – force remove directory dir * man command – show the manual for command cp file1 file2 – copy file1 to file2 df – show disk usage cp -r dir1 dir2 – copy dir1 to dir2; create dir2 if it du – show directory space usage doesn't exist free – show memory and swap usage mv file1 file2 – rename or move file1 to file2 whereis app – show possible locations of app if file2 is an existing directory, moves file1 into which app – show which app will be run by default directory file2 ln -s file link – create symbolic link link to file Compression touch file – create or update file tar cf file.tar files – create a tar named cat > file – places standard input into file file.tar containing files more file – output the contents of file tar xf file.tar – extract the files from file.tar head file – output the first 10 lines of file tar czf file.tar.gz files – create a tar with tail file – output the last 10 lines
    [Show full text]
  • The Linux Command Line
    The Linux Command Line Fifth Internet Edition William Shotts A LinuxCommand.org Book Copyright ©2008-2019, William E. Shotts, Jr. This work is licensed under the Creative Commons Attribution-Noncommercial-No De- rivative Works 3.0 United States License. To view a copy of this license, visit the link above or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042. A version of this book is also available in printed form, published by No Starch Press. Copies may be purchased wherever fine books are sold. No Starch Press also offers elec- tronic formats for popular e-readers. They can be reached at: https://www.nostarch.com. Linux® is the registered trademark of Linus Torvalds. All other trademarks belong to their respective owners. This book is part of the LinuxCommand.org project, a site for Linux education and advo- cacy devoted to helping users of legacy operating systems migrate into the future. You may contact the LinuxCommand.org project at http://linuxcommand.org. Release History Version Date Description 19.01A January 28, 2019 Fifth Internet Edition (Corrected TOC) 19.01 January 17, 2019 Fifth Internet Edition. 17.10 October 19, 2017 Fourth Internet Edition. 16.07 July 28, 2016 Third Internet Edition. 13.07 July 6, 2013 Second Internet Edition. 09.12 December 14, 2009 First Internet Edition. Table of Contents Introduction....................................................................................................xvi Why Use the Command Line?......................................................................................xvi
    [Show full text]
  • Shell Variables
    Shell Using the command line Orna Agmon ladypine at vipe.technion.ac.il Haifux Shell – p. 1/55 TOC Various shells Customizing the shell getting help and information Combining simple and useful commands output redirection lists of commands job control environment variables Remote shell textual editors textual clients references Shell – p. 2/55 What is the shell? The shell is the wrapper around the system: a communication means between the user and the system The shell is the manner in which the user can interact with the system through the terminal. The shell is also a script interpreter. The simplest script is a bunch of shell commands. Shell scripts are used in order to boot the system. The user can also write and execute shell scripts. Shell – p. 3/55 Shell - which shell? There are several kinds of shells. For example, bash (Bourne Again Shell), csh, tcsh, zsh, ksh (Korn Shell). The most important shell is bash, since it is available on almost every free Unix system. The Linux system scripts use bash. The default shell for the user is set in the /etc/passwd file. Here is a line out of this file for example: dana:x:500:500:Dana,,,:/home/dana:/bin/bash This line means that user dana uses bash (located on the system at /bin/bash) as her default shell. Shell – p. 4/55 Starting to work in another shell If Dana wishes to temporarily use another shell, she can simply call this shell from the command line: [dana@granada ˜]$ bash dana@granada:˜$ #In bash now dana@granada:˜$ exit [dana@granada ˜]$ bash dana@granada:˜$ #In bash now, going to hit ctrl D dana@granada:˜$ exit [dana@granada ˜]$ #In original shell now Shell – p.
    [Show full text]