28140 Cast Iron Slide Gates

Cast Iron Slide Gates Pioneers in HydroGate 3888 E. 45th Ave. Gate Design #120 Denver, CO 80216

Your Source for Water Control Gates No matter what type of gates your project demands, chances are excellent Hydro Gate has the right gates for your specific application. Our product offering is vast and can suit applications for a wide variety of industries. Choose from cast iron slide or flap gates, fabricated slide or flap gates, rectangular butterfly gates, stop logs, wall thimbles, lifts and accessories. Industries We Serve Whether you need gates for flood control, wastewater treatment, environmental water treatment, irrigation, dam projects or hydroelectric plants, we can help. From standard configurations to custom designs, Hydro Gate offers a wide variety of water control gates as well as a full complement of actuators to meet your specific application. Service Well Beyond Shipment Our services extend beyond manufacturing. Hydro Gate’s experienced field service technicians can help you with repair and refurbishment projects. If you have existing, yet serviceable gates, we can perform a retrofit that will extend their life and durability. Focus on Quality Hydro Gates expansive 90,000 square foot manufacturing facility utilizes precision equipment that allows us to merge time-tested gate design with cutting edge technology. We offer large scale manufacturing capabilities with the With more than 100 years of experience in gate ability to produce cast iron gates up to 14' x 16' in size, design, Hydro Gate has built a long-standing and fabricated gates up to and over 20' in width or height. reputation of providing superior quality water control gates for a variety of industries. Our manufacturing expertise revolves around making big, heavy-duty gates that are 100% custom-built to match specific applications. Commitment to You… Our Customer At Hydro Gate, customer satisfaction is our top priority. Bring your special requirements to our engineers who have years of experience in gate design. Our dedicated customer service staff is accustomed to custom requests, because that is what we do best. From your first contact through final delivery, our team of engineers and service experts are here to make sure you have the right gates to suit your needs. Heavy Duty HydroGate Cast Iron Slide Gates

Table of Contents

Heavy Duty Cast Iron Slide Gates:

Applications...... 2

Description ...... 2-4

Gate Frame Design ...... 4-5

Gate Slide Design ...... 5-6

Full Width Dovetail Seating Faces...... 6

Painting ...... 6

Materials...... 6

Wedging Devices ...... 7-9

Flush Bottom Closures...... 10-11

Series HG-560 Drawings and Dimensional Data ...... 12-21

Model 100-30 Drawings and Dimensional Data...... 22-26

Specifications...... 27-29

Wall Thimbles:

Features ...... 30

Description ...... 30

Types of Thimbles...... 30-32

Types of Openings ...... 32-36

CAST IRON SLIDE GATE 1 HydroGate Heavy Duty Cast Iron Slide Gates Series HG560

Description Cast iron slide gates are used to control the flow of fluid through openings under a face or seating head, and openings under a back or unseating head.

With seating or face pressure, fluid exerts a force on the front of the gate. The pressure of the water forces the gate slide against the frame. In the design of a structure where cast iron slide gates are used, place the gate so that it will be subjected to a higher seating head whenever possible. When this is done, a lighter gate can be used, and is usually more watertight.

Unseating or back pressure is encountered when the depth of fluid is greater on the back side of the gate. Under these conditions, the fluid force pushes the slide away from the frame and the total force must be resisted by the wedging devices and assembly bolts of the gate. Therefore, gates are designed for considerably less back pressure than they are for face pressure. The possibility of leakage increases with the fluid pushing the slide away from its seating surfaces. Gate Openings Three types of openings are available. 1. Square 2. Rectangular (Width x Height) 3. Round Flange

Most cast iron slide gates are used with square openings; 72”x 72” Heavy Duty Cast Iron Slide Gate however, many standard sizes of rectangular gates are available. It is standard practice throughout the gate industry to first designate the width of the rectangular gate opening, followed by its height. Openings are normally shown in inches. Gates with circular openings are manufactured by Hydro Gate with a Applications round flange back for attaching to pipe flanges. Pressure (Head) Ratings ■ Municipal Sewage Treatment Plants Heads are measured from the horizontal centerline of the gate ■ Municipal Water Works opening to the surface of the water. The majority of gate applications can be handled by Hydro Gate Series HG560, ■ Power Plants which has a minimum seating rating of 55 ft and 20 ft unseating. This series was developed using a finite element ■ Flood Control Projects analysis of the Model 55-20 Heavy-Duty Sluice Gate, which qualified for use in nuclear power plant safety systems. ■ Dams The Model 100-30 has a minimum seating head rating of 100 ■ Industrial Water Control Projects ft and a 30 ft unseating rating. The Model 100-30 has the same basic design as the Series HG560 and Model 55-20. There are ■ Fish Hatcheries some minor differences in the attaching detail of top and bottom wedges.

2 CAST IRON SLIDE GATE HydroGate

Any given size of gate in any model may have an actual safe Cast iron gate frames can be made self-contained by either design rating exceeding the nominal 55-20 or 100-30 rating., extending the guides and furnishing a yoke to close the top of thus Hydro Gate reserves the right to furnish a gate that meets the frame, or by mounting a yoke with extended legs to the or exceeds the project operating requirements based on the tops of standard-length guide bars. In either case, the tops of gate’s specific safe rating. Actual ratings can be obtained by the guides are furnished with machine pads for mounting of a calling your local sales representative or the Hydro Gate yoke. Engineering Department. Slide – General Many unique sizes and configurations of gate patterns in Series The slide in any gate controls flow. Gates in the heavy-duty HG560 and 100-30 have been developed, and Hydro Gate series have square or rectangular one-piece cast iron slides reserves the right to furnish them as appropriate for special with vertical and horizontal ribs providing sufficient applications. reinforcement to meet the design heads. (See Figure 1-2, page 4.) With the gate in the partially open position, the slide Gate Frame must have sufficient beam strength to transmit the total water The gate frame forms the shape of the opening (see Figure pressure to the sides of the gate opening. 1-1). Various types of frames have been available in years past. Hydro Gate has made the flange back frame its standard Wedge pads are cast as an integral part of the slide and each because it is the strongest and most universal of all of those has a machined groove for the side wedge tongue. Guide that were used. The flange back frame has greater rigidity than tongues extend along each side of the slide for its full height other types of frames, which allows it to better withstand and are fully machined. A heavy square or rectangular pocket abnormal forces encountered during shipment, handling, and is cast integrally with the slide to receive a stem block with a installation. Square and rectangular flange back frames can be square or rectangular end for connecting the bottom end of installed with the minimal side and bottom clearances that the stem to the slide. normally would be needed for old-style flat back gates. Slides for Rising or The frame is machined on its back face for attachment to a wall thimble. The frame also can be attached to a wall of the Non-Rising Stem Gates structure with anchor bolts, although this method usually takes Rising stem gates are recommended for all applications. The longer than wall thimble mounting because the gate has to be stem is anchored to the slide with a stem block mounted in a carefully aligned and then grouted in place. heavy block pocket cast integrally on the vertical centerline of the slide. The stem block transmits the stem thrust load into the slide and also resists the torque reaction of the stem nut. The slide and stem move up and down as a unit. The stem does not rotate and is locked to the stem block.

Non-rising stem gate slides have the heavy stem block pocket cast on the vertical centerline and are above the perimeter of the opening. This is done so that the stem does not extend significantly into the flow stream when the gate is open. A non- rising stem rotates but does not move up or down. As the stem rotates, the stem block becomes the thrust nut and is pulled or pushed along the stem and, in turn, pulls or pushes the slide up or down. The stem block resists rotation, because it has a square end fitting into a square pocket.

Non-rising stems should be used only in those locations where there is limited headroom or where the stem will interfere with some other part of the installation, such as a ceiling. The major disadvantage of the non-rising stem gate is that the threaded operating nut and stem are always in the exposed position in the gate well. Lubrication of the threaded portion is difficult, and lack of lubrication may cause excessive wear on the bronze operating nut. Operation problems of gates with non-rising stems increase with gate size. Sizes larger than 36 in. x 36 in. usually require a lift larger than a rising stem design.

In non-rising stem applications, there is a greater potential for excess wear on the threads, especially when they are not properly maintained. Non-rising stem gates are shown as Figure 1-1 standard for gate sizes up to 60 in. x 60 in. maximum. The use Hydro Gate Heavy-Duty Cast Iron Slide Gate Frame of non-rising stems is not recommended for large-size gates.

CAST IRON SLIDE GATE 3 HydroGate

Standard or Flush-Bottom Closure Most cast iron slide gates are furnished with standard bottom closures. The corrosion- resistant face across the bottom of the slide makes contact with the corresponding horizontal face across the bottom of the frame. The bottom edge of the slide has to travel beyond the invert of the gate to cause this type of closure to be made.

When gates are to be installed with the bottom of the opening at the same elevation as the invert of the structure, a flush-bottom closure- type gate is used. The bottom corrosion-resistant face is omitted from both the slide and frame. A rubber seating face is substituted along the bottom of the frame, and the top of this seal is flush with the gate invert. The gate slide now closes against the rubber seal in the invert.

Figure 1-2 Gate Frame Design Hydro Gate Heavy-Duty Cast Iron Slide Gate Slide A gate frame forms the opening and constitutes the gate foundation on which all other parts are built. Frames are cast iron with a square, round, or rectangular configuration. The Stem Block frames are of heavy, one-piece construction with integrally cast Hydro Gate uses a block of metal, usually cast bronze, to guides that support the slide. Grooves or guide slots are connect the slide to the bottom end of the stem. The block is located in the frame, and the integrally cast guides are fully either a cube shape, a cylinder shape, or a cylinder shape with machined to receive the tongues on the sides of the slide. The an integrally cast square flange on one end. The stem block is machines guide slots are of sufficient length to support at least drilled and threaded for its full length. The stem block inserts one-half the height of the slide when it is in the fully opened into a pocket cast into the front of the gate slide. The lower position. The top of each wedge pad is machined, drilled, and end of the stem is threaded to match the block. For rising stem tapped for mounting of wedge blocks. Each wedge pad is gates, the block is locked to the stem after it is screwed into supported by heavy cast iron gussets. The seating surface place with a gib-type key. The stem block for a non-rising stem around the opening of the frame is machined to receive full- gate acts as a lift nut, and the stem is locked to the lift at the width dovetail facings of corrosion-resistant metal. Frame, top of the stem. The threaded block for the non-rising stem guide groove, seating face, and wedge pads are machined on gate raises or lowers on the stem as it turns and opens or closes massive precision machines in a single setup to ensure precise the gate. fit and smooth operation of the gate. Slides for High Head Throttling Service When cast iron slide gates are to be used under throttling conditions for seating heads greater than 65 ft, a 45˚ bevel should be utilized at the bottom edge of the slide. The bottom rib of the slide is tipped up at a 45˚ angle to the face of the gate to form this bevel. The flow through the partially opened gate is improved as the water travels along the bevel formed at the bottom of the gate slide, reducing down pull and minimizing vibration, turbulence, and cavitation.

Gates mounted on closed conduits or that are not open to the atmosphere should be fitted with an air-intake pipe of sufficient size to supply the air demand directly downstream from the gate. This will further reduce turbulence and improve flow through the partially open gate. Figure 1-3 Flange-Back Frame Section

4 CAST IRON SLIDE GATE HydroGate

Flange Back face plate section provides maximum strength to the T beam. Under unseating heads, the rib design is critical. Height and The flange-back frame is the strongest gate foundation thickness, as well as spacing, provide the properties necessary available. (See Figure 1-3, page 4.) Because of the distribution to minimize the tensile stresses and deflection. For this reason, of the material, the U-shaped section of the frame has a the slide is always rated for a seating head that is greater than greater section modulus with minimal increase in weight. This the unseating head rating. extra strength reduces breakage and warping during handling, storage, and installation. The flange-back frame can be installed easily on a wall thimble. Attachment of this frame to a concrete wall or other flat surface using anchor bolts with Side wedge and rib double nuts (one nut in front, one in back of the flange) is also reinforcement detail common practice. With either method, future removal of the gate is possible for maintenance or relocation.

The front flange is slightly narrower than the back flange all the way around its periphery. This allows direct access for placing nuts on studs or anchors to hold the gate in place on the thimble or wall. Minimum side and bottom clearances are needed for gate installation.

At each side wedge location, a heavy reinforcing rib or gusset is cast under the wedge pad between the front flange of the frame and the back flange. This reinforcing rib design is a result of computerized finite element analysis. With the use of this sophisticated computer analysis, the strength of the assembly is maximized with use of an optimum amount of metal. Additional rigidity eliminates deflection at the wedge point to improve water tightness under pressure. Circular Openings Square slides are used with all circular opening cast iron slide gates. The square slide provides for mounting of an adequate number of wedging devices and gives the slide the required beam strength when the gate is partly open.

The round opening is formed by casting webs of iron in the four corners of the frame. A section of metal extends back from this round opening to connect to a round flange.

THE ONLY TIME CIRCULAR OPENING CAST IRON SLIDE GATES SHOULD BE USED IS FOR ATTACHMENT TO EXISTING OR NEW PIPE FLANGES. Hydro Gate has standardized on 55-ft seating and 20-ft unseating head ratings for our Series HG560 design. However, For all other installations requiring a round opening through this is just a designated minimum rating and does not indicate the wall, a square flange round opening wall thimble is strongly the limits of a Hydro Gate heavy duty cast iron slide gate. recommended. By using this type of wall thimble, construction Slides for higher heads are readily available and easily designed is simplified and a good mounting surface is provided for a for specific applications. Please contact the Hydro Gate square gate. Size and bottom clearances needed for installation Engineering Department for details. are minimized, which permits the design of a narrower, less expensive structure. Heavy-duty cast iron slide gate slides can be designed with top and bottom wedges, top wedges and flush bottom, flush bottom and no top wedges, or no top and bottom wedges. Gate Slide Design Optional Design Features Hydro Gate can design and furnish special features for specific Hydro Gate heavy-duty cast iron slide gate slides are integrally applications. A partial list of optional engineered features cast with square or rectangular configurations. Cast iron slide includes: gate slides utilize vertical and horizontal ribs to provide 1. Bronze or stainless steel guide liners for frequent sufficient strength to meet the required design heads. Each unseating head operation. horizontal rib on the slide combines with a section of the face 2. Inverted gate operation (downward opening) to act plate to act as a T beam. With the slide under seating head, the as a weir.

CAST IRON SLIDE GATE 5 HydroGate

3. Piggyback mounting of pressure balancing valves or gate. Painting 4. Non-standard mounting position such as inclined or Painting of cast iron gates is primarily decorative. Cast iron by horizontal movement. nature is corrosion resistant in water and waste-water. The high content of free carbon (graphite) in grey cast iron impedes Contact Hydro Gate Engineering Department for other special progressive corrosion. Hydro Gate’s standard paint for applications. submerged gates and components is black coal tar epoxy paint. Hydro Gate can paint gate products according to customers’ specifications within the limits of environmental regulations Full-Width Dovetail and paint manufacturer’s recommendation. Seating Faces Painting of gates with multiple coat systems or special colors adds significantly to production time and costs. Hydro Gate full-width, dovetail seating face is an exclusive The long-term life of the gate is not improved with Hydro Gate feature that eliminates all fasteners and ensures “exotic” paint systems. positive and accurate attachment of seating faces. (See Figure 1-4, below.) Standard paint on non-submerged components, such as lifts, is machinery enamel. A dovetail slot or groove is machined in the cast iron face of both the gate slide and frame. Full-width, corrosion-resistant metal facings are placed in the grooves and securely seated by pneumatically hammering a specific number of blows per inch Materials of length. The design of the original chevron-shape raw seating face is such that the dovetail grooves are completely filled and Frames and slides are grey cast iron for most applications in the facings are locked and held in position for the full width normal water. Frames and slides for seawater or brackish and length. After seating, the faces are machined perfectly flat water, such as water used in pulp mills, should be made of to ensure proper contact with each other when the gate is nickel containing cast iron (Ni-Resist) to avoid graphitization closed. and loss of strength under these harsh environments.

Naval bronze, silicon bronze, stainless steel, and Monel are available in full width dovetail sections. One of these metals is a suitable seating face material for virtually any proposed service or environment. The correct seating face material reduces corrosion at this vital location and improves gate operation.

For those installations where naval bronze does not offer the required protection against corrosion, Hydro Gate provides full-width dovetail seating faces of Type 304 or 316 stainless steel. These highly corrosion-resistant metal faces have approximately 18% chromium and 8% nickel. Stainless steel faces have a harder surface and resist wear. In those locations where low zinc bronze (less than 6% zinc) is needed to avoid possible dezincification, silicon bronze should be utilized. Unit pressures on the seating face are usually well below 2,000 psi, Figure 1-4 even under full wedge condition. Type 304 and 316 stainless Dovetail Seating Face Detail steel can be used under these low unit pressures without the danger of galling. This method of mounting eliminates the possibility of leakage between the corrosion-resistant metal face and the casting because there are no voids or overhangs between the two, and the facing will not work loose during normal gate operation.

No fasteners are needed to hold seating faces in place, which avoids the possibility of fasteners allowing leakage or working loose and causing the gate to malfunction. With the full-width dovetail seating surface, the intersection of faces at the four corners is metal-to-metal and does not require fasteners, brazing, or other methods to seal them against leakage.

6 CAST IRON SLIDE GATE HydroGate

Side Wedge (Mounted on Slide) Hydro Gate’s side wedging device is completely adjustable and is firmly and easily locked in place. (See Detail 1-1, below, and Figure 1-6, page 8.) A groove is machined into each face of each wedge pad on the slide. A tongue on the back of the wedge fits into the groove and holds the wedge in alignment when it contacts the overhang portion of the wedge block. A slotted hole in the corrosion-resistant metal wedge allows for full adjustment. A unique design feature ensures positive locking of each side wedge in its correctly adjusted position. Opposing inclined surfaces are utilized to prevent slippage of the wedge and to eliminate the need for adjusting screws and lock nuts. The wedge mounting stud surface is machined at a taper in the opposite direction of the wedging face. The mounting stud is drilled and tapped into the slide at an angle Side wedge assembly which results in the stud being perpendicular to the opposing tapered surface on the wedge. As the gate is closed into the wedges, the side wedge position is fixed. The thicker section of Wedging Devices metal resists being pushed under the nut and washer on the stud. Wedging devices are used to force seating surfaces together when the gate is closed. Pads for mounting wedges and wedge Side wedges and wedge blocks can be individually removed blocks are cast as integral parts of the slide and frame. These and replaced if damage should occur after the gate is in pads are machined and drilled as required to receive wedging operation. devices. All Hydro Gate heavy-duty gates are provided with side wedging devices in sufficient number to force the seating faces together when the gate is fully closed. For heavy-duty cast iron slide gates 24 in. and wider, top and bottom wedging devices are added when unseating heads are encountered.

Detail 1-1 Series HG560 Heavy-Duty Cast Iron Slide Gate Slide Wedge and Side Wedge Block Details

CAST IRON SLIDE GATE 7 HydroGate

Wedging action is between the projection of the wedge and a stirrup securely attached to the back flange of the gate by two cap screws.

The adjustable portion of the wedge is held in place by a groove cut in the top wedge pad which prevents turning of the wedge hook by an outside force.

Adjustment is by a separate fastener bearing against the boss on the slide (see Figure 1-5).

Figure 1-5 Top Wedging Device

A tongue on the back of the wedge fits into a machined groove on the slide and holds the wedge in alignment.

The stud holding the wedge to the slide is at an angle of less than 90˚ to the machined groove. When the nut on the stud is tightened, the wedge is firmly locked in position. Each wedge block is individually mounted on its pad on the gate frame with two fasteners (see Figure 1-6).

Figure 1-6 Side Wedging Device

Wedging action occurs when the projection on the bottom wedge hook engages the tapered surface inside the wedge stirrup, which is securely mounted to the back flange of the gate frame by two cap screws.

A full-width groove is cut in the pad on the slide to hold the wedge hook in alignment. As with the top wedge, the wedge hook cannot turn when the gate is in the partially open position. Positive adjustment is accomplished by use of a cap screw and locknut (see Figure 1-7).

Figure 1-7 Bottom Wedging Device

8 CAST IRON SLIDE GATE HydroGate

Wedge Block (Mounted on Frame) Design of Hydro Gate top and bottom wedging devices positively prevents rotation of wedges at all times by one of the Hydro Gate wedge blocks are attached to a wedge pad on the following methods: gate frame with two oversized fasteners. These cap screws are sized to resist the wedging thrust loads. Low clearances on cap a) Series HG-560: Top and bottom wedges (hooks) are screw holes and high clamp forces in the cap screws resist any mounted in a machined slot on the side to keep them tendency of the wedge block to rotate. (See Detail 1-1, page 7, aligned. These wedges are mounted with a large and Figure 1-6, page 8.) corrosion-resistant cap screw and adjustment is maintained with an adjusting screw and jam nut. The wedge block is designed with generous safety factors. The The adjusting screw bears against the slide casting wedge blocks are easily replaceable and interchangeable to positively prevent rotation at all times. during refurbishment and do not require the entire b) Model 100-30: Top and bottom wedges (hooks) are replacement of the frame if the frame is in good condition. mounted on a machined pad on the slide with two corrosion-resistant cap screws. The adjustment is Top and Bottom Wedges maintained as described above with a set screw bearing Top and bottom wedging devices are used when gates are against the slide casting. subjected to unseating heads. The purpose of these wedging devices is to minimize deflection of the slide caused by Hydro Gate’s top and bottom wedging devices are adjustable. pressure from the unseating head when the gate is in the fully With the gate in a fully closed position and water on its back closed position. The top and bottom wedges pull the seating side, the adjusting screw can be tightened to pull the seating faces together so water-tightness is improved. After the gate faces together. The design of the mounting pad and wedge has been opened a fraction of an inch, these top and bottom hook prevent the adjusting screw from bearing against the wedges are no longer in contact with their mating surfaces and mounting cap screw. This eliminates shear forces in the cap do not add to the strength of the slide. screw.

Top wedge assembly Bottom wedge assembly

CAST IRON SLIDE GATE 9 HydroGate

Flush Bottom Closures

• Provides unimpeded flow not subject to damage from flowing debris • Fully supported on three sides • Replaceable uniform section throughout length • Minimizes damage caused by sunlight and wet and dry cycles Flush-Bottom Closure Design For normal standard bottom configuration, it is necessary for the slide to project below the bottom of the gate opening. In many installations, it is desirable to eliminate the recess in the floor needed for standard gate closure. A recess in the floor of a continuous structure tends to collect foreign material such as gravel, debris, and stagnant water. These foreign materials not only interfere with the flow, but also may prevent closing of Flush bottom seal assembly the gate.

The Hydro Gate flush-bottom seal provides a flat plane across the bottom of the gate opening, with no part of the seal projecting into the opening to obstruct the flow. The seal With only one surface of the rubber seal exposed, Hydro Gate is mounted on a stainless steel angle at the bottom of the flush-bottom seals are equally suited for operating heads in frame and is held in place with a stainless steel retainer bar. either direction. The flush-bottom seal takes the place of The seal extends beyond the sides of the slide providing bottom wedges for unseating heads. With the gate slide in the continuous contact across the bottom of the gate. This fully closed position, the wide rubber seating face of the Hydro arrangement eliminates gaps and leakage at the sides of the Gate flush-bottom seal makes firm contact with the machined gate opening as can be the case with flush-bottom seals sealing edge on the gate slide, regardless of the deflection of mounted on the gate slide. the slide under seating heads.

The rectangular rubber bulb seal is firmly supported on three Following are typical installation type drawings that can be sides. With only the top sealing surface exposed, damage from used for illustrative purposes in contact drawings or for brief floating objects, wet/dry conditions, or sunlight is held to a submittals. Different options are available and applicable minimum. Abrasion resistant rubber, along with a frame- options wanted should be checked. For example, the gate mounted location, eliminates seat replacement problems. Slide should be either anchor bolt or wall thimble mounted. If mounted seals can be subject to these damaging problems. mounted on a wall thimble, the type and overall length should The knife edge across the bottom of the slide is rounded to be indicated. prevent damage to the seal when the gate is closed. As the gate begins to seat, the seal conforms to the projection on the slide. Lifts are shown mounted on concrete or wall brackets. Please When the gate is closed tightly, the seal is confirmed and reacts refer to the Lift and Lift Accessories brochure for details. against the thrust of the slide to make a watertight seal across the bottom opening. The dimension from centerline of gate to top of concrete should be indicated. This is the “H” dimension.

10 CAST IRON SLIDE GATE HydroGate

Installation Clearances for Series HG-560 Flush Bottom Gates

Gate Recess Dimensions (In.) Height (In.) Recess Height (B) Recess Depth (C)

6 - 24 6 16 30 - 54 8 20 60 - 96 9 29 108 - 120 10 29

FILL BLOCKOUT WITH NON-SHRINK GROUT AFTER INSTALLATION

Figure 1-8 Heavy-Duty Cast Iron Slide Gate Flush-Bottom Detail

Drilling slide for wedges. Stem block inserted into stem block pocket with threaded and keyed connection to stem.

CAST IRON SLIDE GATE 11 HydroGate

Drawings and Dimensional Data Select Options ■ Rising Stems ■ Standard Bottom ■ Top Wedges ■ Wall Thimble Mount ■ Non-Rising Stem ■ Flush Bottom ■ Bottom Wedges ■ Anchor Bolt Mount Wall Thimble Length (in inches)______Wall Thimble Type: ■ F ■ E ■ Mechanical Joint ■ Lift Mounted on Concrete Wall Thimble Opening: ■ Round ■ Rectangular ■ Lift Mounted on Wall Bracket

Figure 1-9 Handwheel Pedestal Lift – Heavy-Duty Cast Iron Slide Gate (Series HG-560)

12 CAST IRON SLIDE GATE HydroGate

Select Options ■ Rising Stems ■ Standard Bottom ■ Top Wedges ■ Wall Thimble Mount ■ Non-Rising Stem ■ Flush Bottom ■ Bottom Wedges ■ Anchor Bolt Mount Wall Thimble Length (in inches)______Wall Thimble Type: ■ F ■ E ■ Mechanical Joint ■ Lift Mounted on Concrete Wall Thimble Opening: ■ Round ■ Rectangular ■ Lift Mounted on Wall Bracket

Figure 1-10 Enclosed Geared Pedestal Lift – Heavy Duty Cast Iron Slide Gate (Series HG-560)

CAST IRON SLIDE GATE 13 HydroGate

Figure 1-11 Electric Actuator – Heavy-Duty Cast Iron Slide Gate (Series HG-560)

14 CAST IRON SLIDE GATE HydroGate

Figure 1-12 Hydraulic Cylinder Mounted on a Wall Bracket – Heavy-Duty Cast Iron Slide Gate (Series HG-560)

CAST IRON SLIDE GATE 15 HydroGate

Figure 1-13 Square Opening, 55 Ft Seating Head; 20 Ft Unseating Head – Heavy-Duty Cast Iron Slide Gate (Series HG-560)

This is a design class head rating. Many gate sizes have a higher actual head rating. Please contact Hydro Gate’s Engineering Department for maximum head ratings. NOTE: G and H are installation clearance dimensions.

16 CAST IRON SLIDE GATE HydroGate

Square Opening – Heavy-Duty Cast Iron Slide Gate (Series HG-560)

Flange Back Dimensions

Back Centerline Centerline Mounting to Bottom to Slide Centerline Flange to Overall of Frame Full Opening to Top of Centerline Thickness Installation Installation Gate Width Flange Position Frame of Stem of Gate Clearance Clearance Size (A) (B) (C) (D) (E) (F) (G) (H)

6 x 6 14.00 7.00 14.37 8.87 5.75 7.25 18.00 9.00 8 x 8 16.00 8.00 16.37 10.87 5.75 7.25 20.00 10.00 10 x 10 18.00 9.00 19.37 12.87 5.75 7.25 22.00 11.00

12 x 12 20.00 10.00 22.37 14.12 5.75 7.25 24.00 12.00 14 x 14 22.00 11.00 26.75 16.87 5.75 8.12 26.00 19.00 15 x 15 23.00 11.50 26.87 17.87 5.75 7.25 27.00 13.50

16 x 16 24.00 12.00 28.37 18.87 5.75 7.25 28.00 14.00 18 x 18 26.00 13.00 31.37 20.87 5.75 7.75 30.00 15.00 20 x 20 28.00 14.00 34.37 22.87 5.75 7.25 32.00 16.00

21 x 21 29.00 14.50 35.87 23.87 6.00 7.50 33.00 16.50 24 x 24 32.00 16.00 41.62 26.87 5.75 8.12 36.00 18.00 30 x 30 38.00 19.00 52.37 32.87 6.37 8.87 42.00 21.00

36 x 36 47.00 23.50 61.37 41.12 7.37 10.87 51.00 25.50 39 x 39 50.50 25.25 66.25 44.25 7.50 11.50 50.50 27.50 42 x 42 53.00 26.50 70.37 47.12 7.50 12.00 57.00 28.50

48 x 48 59.00 29.50 79.37 53.12 7.50 13.50 63.00 31.50 54 x 54 65.00 32.50 91.37 59.12 8.62 16.00 69.00 34.50 60 x 60 73.00 36.50 101.50 65.50 10.00 17.37 77.00 38.50

63 x 63 76.00 38.00 99.62 68.00 10.00 17.37 80.00 40.00 66 x 66 79.00 39.50 106.50 71.00 10.25 18.62 83.00 41.50 72 x 72 85.00 42.50 115.50 77.00 10.25 19.12 89.00 44.00

78 x 78 91.00 45.50 124.50 83.00 10.25 20.12 95.00 47.50 84 x 84 97.00 48.50 133.50 89.00 10.25 21.62 101.00 50.50 90 x 90 103.00 51.50 142.87 95.00 10.25 24.12 107.00 53.50

96 x 96 109.00 54.50 151.87 101.00 10.50 22.87 113.00 56.50 108 x 108 122.50 61.25 169.87 113.00 12.50 23.37 126.50 63.25 120 x 120 134.50 67.25 187.87 125.00 12.62 23.37 138.50 69.25

144 x 144 158.50 79.25 221.25 84.50 13.00 25.00 162.50 81.25

CAST IRON SLIDE GATE 17 HydroGate

Figure 1-14 Round Opening, 55 Ft. Seating Head; 20 Ft. Unseating Head – Heavy-Duty Cast Iron Slide Gate (Series HG-560)

18 CAST IRON SLIDE GATE HydroGate

Round Opening – Heavy-Duty Cast Iron Slide Gate (Series HG-560)

Back of Centerline Centerline Mounting to Bottom to Slide Centerline Flange to Overall Gate of Frame Flange Full Opening to Top Centerline Thickness Installation Installation Diameter Width Flange Diameter Position of Frame of Stem of Gate Clearance Clearance (In.) (A) (B) (In.) (C) (D) (E) (F) (G) (H)

6 12.75 6.50 11.00 13.75 8.87 6.87 8.37 24.00 14.00 8 14.75 7.50 13.50 16.37 10.87 6.37 8.37 26.00 15.00 10 16.75 8.50 16.00 19.37 12.87 6.37 6.87 28.00 16.00

12 18.75 9.50 19.00 22.37 14.12 6.87 8.37 30.00 17.00 14 20.75 10.50 21.00 25.37 16.87 8.37 6.87 32.00 18.00 15 21.00 10.75 22.00 28.25 16.50 6.25 8.50 35.00 18.50

16 22.00 11.25 23.50 29.50 17.75 6.00 8.00 36.00 19.00 18 22.75 12.50 25.00 31.37 20.87 6.87 8.87 38.00 20.00 20 26.75 13.50 27.50 34.37 22.87 7.12 8.62 40.00 21.00

21 27.00 13.75 28.50 38.00 23.00 6.75 8.75 41.00 21.50 24 28.75 16.00 32.00 41.62 26.87 7.25 9.75 44.00 23.00 30 34.75 19.00 38.37 52.37 32.87 8.00 10.25 54.00 30.00

36 44.00 23.00 46.00 61.50 40.00 8.25 11.25 60.00 33.00 42 50.00 25.87 53.00 71.75 44.00 10.00 13.50 66.00 36.00 48 56.00 28.00 59.50 81.25 52.00 9.75 14.75 72.00 41.00

54 62.00 32.00 66.25 91.25 57.00 10.00 15.00 78.00 44.00 60 70.00 35.50 73.00 101.25 64.00 10.75 17.37 90.00 47.00 66 76.00 38.50 80.00 108.75 70.00 10.37 17.25 96.00 50.00

72 82.00 42.25 86.50 117.87 77.00 10.75 18.50 102.00 53.00 78 89.00 44.75 93.50 138.37 83.00 11.25 19.00 108.00 57.00 84 94.00 47.75 99.75 138.00 88.00 11.25 19.25 116.00 60.00

90 102.00 51.25 106.50 144.62 95.00 13.00 19.00 122.00 63.00 96 108.00 54.25 112.50 155.75 101.00 14.00 18.00 128.00 66.00

CAST IRON SLIDE GATE 19 HydroGate

Figure 1-15 Rectangular Opening, 55 Ft. Seating Head; 20 Ft. Unseating Head – Heavy-Duty Cast Iron Slide Gate (Series HG-560)

20 CAST IRON SLIDE GATE HydroGate

Rectangular Opening – Heavy-Duty Cast Iron Slide Gate (Series HG-560)

Flange Back Dimensions (In.)

Back Centerline Centerline Mounting to Bottom to Slide Centerline Flange to Overall Gate of Frame Full Opening to Top of Centerline Thickness Installation Installation Size Width Flange Position Frame of Stem of Gate Clearance Clearance Width x Height (A) (B) (C) (D) (E) (F) (G) (H)

18 x 24 26.00 16.00 40.37 26.87 5.75 7.25 30.00 18.00 18 x 36 26.00 22.00 61.37 40.87 6.37 8.87 30.00 24.00

24 x 30 32.00 19.00 52.37 32.87 6.37 8.37 36.00 21.00 24 x 36 32.00 22.00 61.37 40.87 6.37 8.37 36.00 24.00

36 x 24 47.00 17.50 43.37 27.87 7.37 10.87 51.00 20.00 36 x 42 47.00 26.50 70.37 47.12 7.50 9.50 51.00 29.00 36 x 96 49.00 54.50 151.50 101.00 8.87 12.25 53.00 57.00

42 x 48 53.00 29.50 79.37 53.12 7.50 12.00 57.00 32.00

48 x 36 59.00 23.50 61.37 41.12 7.50 13.50 63.00 26.00 48 x 60 61.00 36.50 101.25 65.25 8.62 13.50 65.00 39.00 48 x 96 61.00 54.50 151.87 101.00 10.25 16.62 65.00 57.00

60 x 72 73.00 42.50 115.50 78.50 10.25 17.12 77.00 45.00 60 x 84 73.00 48.50 133.50 89.00 10.25 17.62 77.00 51.00 60 x 96 73.00 54.50 151.50 102.50 10.25 18.12 77.00 57.00

66 x 42 79.00 27.50 70.50 46.00 10.25 16.12 83.00 30.00

72 x 48 85.00 30.50 79.50 53.00 10.25 19.50 89.00 33.00 72 x 60 85.00 36.50 97.50 65.50 10.25 19.62 89.00 39.00 72 x 96 85.00 54.50 151.50 101.00 10.25 20.12 89.00 57.00

84 x 96 97.00 54.50 151.87 101.00 10.25 22.12 101.00 57.00

96 x 48 109.00 30.50 79.25 53.00 10.25 22.12 113.00 33.00 96 x 60 109.00 36.50 101.50 65.50 10.25 22.87 113.00 39.00 96 x 72 109.00 42.50 115.50 77.00 10.25 22.12 113.00 45.00

108 x 120 122.50 67.25 187.87 125.00 12.62 23.37 127.00 70.00

120 x 96 134.50 55.25 151.87 101.00 12.62 23.87 139.00 58.00

CAST IRON SLIDE GATE 21 HydroGate

Figure 1-16 Square Opening, 100 Ft. Seating Head; 30 Ft. Unseating Head – Heavy-Duty Cast Iron Slide Gate (Model 100-30)

22 CAST IRON SLIDE GATE HydroGate

Square Opening – Heavy-Duty Cast Iron Slide Gate (Model 100-30)

Flange Back Dimensions

8 x 8 14.00 7.25 17.87 10.00 6.00 7.50 26.00 15.00 10 x 10 16.00 8.25 20.87 12.00 6.00 8.00 28.00 16.00 12 x 12 18.00 9.25 24.00 13.50 6.00 8.25 30.00 17.00

14 x 14 20.00 10.25 27.75 15.50 6.00 7.50 32.00 18.00 15 x 15 21.00 10.75 28.50 16.50 6.25 8.50 35.00 18.50 16 x 16 22.00 11.25 29.50 17.50 6.25 8.25 36.00 19.00

18 x 18 24.00 13.00 32.75 20.00 7.00 9.25 38.00 20.00 20 x 20 26.00 14.00 36.00 22.00 7.00 9.50 40.00 21.00 24 x 24 30.50 15.75 41.25 26.00 7.25 9.75 44.00 23.00

30 x 30 38.00 19.00 52.25 32.00 8.50 11.00 54.00 30.00 36 x 36 44.00 23.00 59.75 40.00 9.75 12.25 60.00 33.00 42 x 42 50.00 26.00 72.25 44.00 10.00 14.25 66.00 36.00

48 x 48 56.00 28.00 77.12 52.00 10.00 15.50 72.00 41.00 54 x 54 63.00 32.00 91.25 57.00 9.50 14.75 78.00 44.00 60 x 60 70.00 35.50 101.25 64.00 11.00 17.25 90.00 47.00

72 x 72 82.00 42.50 115.75 77.00 11.00 20.00 102.00 53.00 78 x 78 88.00 44.75 125.00 83.00 11.00 19.00 108.00 57.00 84 x 84 94.00 47.75 135.25 88.00 11.00 22.00 116.00 60.00

90 x 90 102.00 51.25 143.87 95.00 14.00 23.00 122.00 63.00 96 x 96 108.00 54.25 153.87 101.00 14.00 23.00 128.00 66.00 108 x 108 119.00 60.25 170.37 113.00 13.25 25.25 140.00 72.00

120 x 120 132.00 66.00 188.75 125.00 14.25 25.00 152.00 78.00

CAST IRON SLIDE GATE 23 HydroGate

Figure 1-17 Rectangular Opening, 100 Ft. Seating Head; 30 Ft Unseating Head – Heavy-Duty Cast Iron Slide Gate (Model 100-30)

24 CAST IRON SLIDE GATE HydroGate

Rectangular Opening – Heavy-Duty Cast Iron Slide Gate (Model 100-30)

Flange Back Dimensions (In.)

18 x 30 26.00 19.00 51.25 32.00 7.87 11.37 38.00 30.00 24 x 12 30.00 10.00 23.37 13.50 6.50 8.00 42.00 17.00 24 x 18 30.50 13.00 32.62 32.19 6.75 9.00 42.00 20.00

24 x 30 32.00 19.00 52.12 53.25 7.75 11.25 44.00 26.00 24 x 42 32.00 25.00 70.00 46.00 8.25 11.25 44.00 38.00 24 x 48 32.00 28.00 79.12 52.00 8.00 10.25 44.00 41.00

30 x 24 36.50 16.00 42.00 26.00 7.75 9.50 52.00 27.00 30 x 36 38.00 22.00 61.12 64.50 8.00 10.25 54.00 33.00 30 x 48 38.00 28.00 79.50 52.00 9.25 12.25 54.00 41.00

36 x 18 42.50 13.00 35.00 36.00 7.25 10.25 58.00 24.00 36 x 30 44.00 19.00 52.50 54.25 8.75 10.50 60.00 33.00 36 x 48 44.00 28.00 79.50 82.75 9.00 12.25 60.00 41.00

36 x 60 46.00 35.25 100.12 101.37 9.00 12.25 62.00 47.00 36 x 72 46.00 41.00 115.50 77.00 10.00 14.00 62.00 53.00 36 x 84 46.00 47.50 136.12 89.00 10.25 14.50 63.00 57.00

36 x 96 47.00 54.00 153.00 101.00 10.50 15.00 63.00 64.00 42 x 30 50.00 19.00 52.50 55.25 9.00 12.00 66.00 30.00 42 x 36 50.00 22.00 63.00 64.50 8.00 10.25 66.00 33.00

42 x 60 52.00 35.50 99.75 64.00 10.00 13.75 68.00 47.00 48 x 24 56.00 16.00 44.25 46.50 8.75 12.00 76.00 29.00 48 x 30 56.00 19.00 53.87 56.12 8.75 10.75 72.00 29.00

48 x 36 56.00 22.87 63.75 64.25 9.00 13.50 72.00 35.00 48 x 54 57.00 32.75 90.00 93.25 9.56 14.00 74.00 44.00 48 x 72 58.00 41.50 118.25 77.00 10.25 14.50 76.00 53.00

48 x 84 58.00 47.50 136.12 88.00 10.75 14.12 76.00 60.00 54 x 36 62.00 23.00 64.00 65.00 9.50 14.25 78.00 35.00 54 x 72 64.00 41.75 117.50 121.00 10.50 15.00 80.00 53.00

60 x 30 70.00 20.50 54.25 57.25 10.50 16.00 90.00 32.00 60 x 36 68.00 22.50 64.75 64.50 9.25 15.50 84.00 32.00 60 x 48 70.00 29.50 81.87 85.25 10.50 17.00 88.00 41.00

CAST IRON SLIDE GATE 25 HydroGate

Rectangular Opening – Heavy-Duty Cast Iron Slide Gate (Model 100-30) – continued

Flange Back Dimensions (In.)

60 x 72 70.00 41.50 118.62 77.00 10.50 16.00 90.00 53.00 60 x 84 70.00 47.75 137.12 89.00 11.87 16.75 90.00 59.00 60 x 120 72.00 66.25 192.00 125.00 13.00 19.50 92.00 80.00 72 x 48 82.00 29.50 82.25 52.00 10.50 17.00 102.00 43.50 72 x 84 83.00 47.50 137.12 88.00 11.25 18.50 104.00 60.00

84 x 60 94.00 35.50 101.32 64.00 11.00 19.75 114.00 48.00 84 x 72 94.00 41.50 119.75 77.00 11.00 20.00 114.00 54.00 96 x 48 104.75 29.25 79.75 52.00 9.75 15.25 126.00 42.00

96 x 60 106.00 35.75 98.50 64.00 10.25 15.50 126.00 48.00 96 x 72 106.00 41.75 118.75 77.00 10.50 19.75 126.00 54.00 96 x 84 107.00 47.75 134.12 89.00 10.75 19.75 126.00 60.00

96 x 120 108.00 66.00 186.37 125.00 13.00 17.25 128.00 78.00 108 x 72 120.00 42.75 120.25 77.00 13.25 22.00 138.00 54.00 108 x 96 120.00 54.25 151.50 101.00 13.37 19.87 140.00 66.00

120 x 72 132.00 42.25 120.50 77.00 13.25 24.00 150.00 54.00 120 x 84 131.00 48.00 138.75 88.00 11.75 23.75 152.00 60.00 144 x 96 156.00 54.00 153.75 101.00 14.25 25.00 176.00 66.00

26 CAST IRON SLIDE GATE HydroGate

Stems and Stem Couplings Specifications For Heavy-Duty Stainless steel, ASTM A276, Type 304 Cast Iron Slide Gates Fasteners Stainless steel, ASTM F593/F594, Alloy Group 1 Flush-Bottom Seal General Flush-Bottom Retainer The contractor shall furnish and install the following cast iron Stainless steel, ASTM A276, Type 304 slide gate assemblies as listed on the “Gate Schedule” and detailed on the manufacturer’s drawings. The cast iron slide MATERIAL COMBINATION NUMBER 3: gate assemblies shall include the gate, frame, wall thimble (if Normal service except resistance to dezincification of bronze required), stem, stem guides, and lift. Cast iron slide gates and (less than 6% zinc content). Low unseating heads (<20 ft). installation shall meet the requirements of AWWA C560 except as modified herein. The gate shall be manufactured by Frame, Slide, Wall Thimble, Pedestal, Gear Housing, Hydro Gate or approved equal. Wall Brackets, and Stem Guide Brackets Cast Iron, ASTM A126, Class B Materials of Construction Side Wedges, Wedge Blocks and Stem Block Materials used in construction of gates shall be of the type best Silicon bronze, ASTM B584, Alloy C873 or C876 suited for the application and shall conform to the following Top and bottom wedges and wedge blocks ASTM specifications. Stainless steel, ASTM A743 CF8M and ASTM A747 condition SA MATERIAL COMBINATION NUMBER 1: Lift Nut Regular service, normal water, and wastewater. Bronze, ASTM B584, Alloy C86500 Frame, Slide, Wall Thimble, Pedestal, Gear Housing, Seating Faces Wall Brackets, and Stem Guide Brackets Silicon bronze, ASTM B98, Alloy C651 Cast iron, ASTM A126, Class B Stems and Stem Couplings Wedges and Wedge Blocks Stainless steel, ASTM A276, Type 304 Bronze, ASTM B584, Alloy C862 Fasteners Lift Nut and Stem Block Stainless steel, ASTM F593/F594, Alloy Group 1 Bronze, ASTM B584, Alloy C865 Flush-Bottom Seal Seating Faces Silicon Bronze, ASTM B98, Alloy C651 Flush-Bottom Retainer Stainless steel, ASTM A276, Type 304 Stems and Stem Couplings Stainless steel, ASTM A276, Type 304 MATERIAL COMBINATION NUMBER 4: Fasteners Highly corrosive applications, seawater. Stainless steel, ASTM F593/F594, Alloy Group 2 Frame, Slide, Wall Thimble, Pedestal, Gear Housing, Flush-Bottom Seal Wall Brackets, and Stem Guide Brackets Flush-Bottom Retainer Ni-Resist cast iron, ASTM A436, Type 2 or 2b Stainless Steel, ASTM A276, Type 304 Wedge and Wedge Blocks Stainless steel ASTM A743 CF8M and ASTM A747 MATERIAL COMBINATION NUMBER 2: condition SA Corrosive environment requiring harder, wear-resistant seating Lift Nut faces and resistance to dezincification. Bronze, ASTM B584, Alloy C86500 Frame, Slide, Wall Thimble, Pedestal, Gear Housing, Stem Block Wall Brackets, and Stem Guide Brackets Stainless steel, ASTM A743, CF8M Cast iron, ASTM A126, Class B Seating Faces Wedges and Wedge Blocks Stainless steel ASTM A276, Type 316 Stainless steel, ASTM A743, CF8M and ASTM A747, Condition SA Stems and Stem Couplings Stainless steel ASTM A276 Type 316 Lift Nut Bronze, ASTM B584, Alloy C86500 Fasteners Stainless Steel, ASTM F593/F594, Alloy Group 2 (316) Stem Block Stainless steel, ASTM A743, CF8M Flush-Bottom Seal Seating Faces Flush-Bottom Retainer Stainless steel, ASTM A276, Type 316 Stainless steel, ASTM A276, Type 316

CAST IRON SLIDE GATE 27 HydroGate

wedge block. Wedges shall be fully adjustable and keyed to Specifications for Heavy Duty prevent any lateral rotation. Side wedges shall be machined with angled faces and secured with a stud bolt to prevent any Cast Iron Slide Gates slippage during operation of the gate. Gate shall be designed Slide with adjustable top and bottom wedges attached to the frame and slide. The top and bottom wedges shall be mounted in a The gate slide shall be cast iron and shall be of one-piece machined slot and bolted to the slide to prevent lateral construction. The slide shall be square or rectangular in shape rotation. All contact faces of wedges and wedge blocks shall be with integrally cast vertical and horizontal reinforcing ribs. A precision-finished with 63 micro-inch finish or better. heavy reinforcing rib along each side shall be provided to ensure rigidity between side wedges. The slide shall be designed to operate under maximum specified unbalanced Flush-Bottom Seal head with the minimum safety factory of five. Guide tongues Flush-bottom gates shall be provided with a frame-mounted along each side of the slide shall be machined all over. A nut flush-bottom seal. The solid bulb resilient rubber seal shall be pocket shall be cast on the vertical centerline of the gate and firmly held in place using stainless steel retainers and shall be provided with a threaded block for attaching the stem corrosion-resistant fasteners. The full length of the bottom to the slide. Pads for side wedges and top and bottom wedges, edge of the slide shall be machined for making uniform contact when required, shall be integrally cast on the slide and with the seal when it is mounted on the frame. The differential machined to receive the adjustable wedges. pressure on the rubber seal shall be variable by adjustment of wedges on the gate. Frame and Guides The gate frame and guides shall be cast iron and shall be a one- Wall Thimble piece integral casting. Guide grooves shall be machined on all Wall thimble shall be a heavy, one-piece iron casting of an E, F contact faces. Overall clearances with slide tongue shall be not or mechanical joint type configuration. A center ring or water more than 1/8 in. Faces for mounting of wedging devices shall stop shall be cast around the periphery of the thimble. The be fully machined. Guide grooves shall be of such length as to front face of the thimble shall be machined and holes drilled support at least one-half of the slide when it is in the full open and tapped for attaching the gate with corrosion-resistant position. Frames shall be self-contained (S/C) or not self- metal studs. The vertical centerline shall be clearly marked at contained (NS/C) as listed in the “Gate Schedule.” Frames with top and bottom to permit alignment of the front face in the a spigot-back arrangement are not allowed. Round opening vertical plane. Wall thimbles shall be internally braced during gates shall have a circular flange cast as part of the frame for concrete placement to prevent warping. Square thimbles shall mounting to a wall or pipe flange. All wall thimble-mounted be provided with holes in the invert to allow satisfactory gates shall have a square or rectangular flanged-back frame. concrete placement beneath the thimble. Holes shall be on The frame shall be fully machined and drilled to match the wall centers of 24 inches or less. A rubber gasket of uniform thimble. Gates mounted on pipe flanges shall be furnished with thickness or a mastic shall be used to form a seal between the partial drilling per manufacturer’s recommendations. front face of the thimble and the back of the gate frame. E- type or mechanical joint wall thimbles shall have the back Yokes flange drilled and machined as shown in the plans or specified in the “Gate Schedule.” Yokes of self-contained gates shall be cast iron or structural steel. They shall be designed to withstand the thrust of the manual lift when a 40 pound pull is placed on the handwheel Stem and Stem Splices or crank with a safety factor of 5 based on the ultimate Stems shall be manufactured from stainless steel sized to strength of the material used. The yokes shall be bolted to withstand the axial compressive and tensile forces created machined pads on the gate frame. during gate operation under the specified unbalanced heads and to transmit in compression at least two times the rated Seating Faces output of the lift with a 40-lb effort on the crank or handwheel, or 1.25 times the stall thrust of the electric actuator. Threading Corrosion-resistant seating faces shall be mounted around the on stems shall be rolled with double-lead threads of the Acme perimeter of the slide and frame. They shall be impacted into type. Cut threads will not be allowed. The contact surfaces of dovetail slots and held in position without use of screws or the threads shall have a maximum 16 micro-inch finish. Stem other fasteners. After mounting, they shall be machined to a couplings shall have internal threads for transmitting the full plane with a 63 micro-inch finish or better. When the slide is in thrust of the stem and shall be held in place on the stem with a the fully closed position and wedged in position against the key, simultaneously engaging the coupling and both stems. frame, maximum clearance between seating faces shall not exceed 0.004 in. Stem Guides Wedges Stem guides shall be fully adjustable, heavy duty castings, with 2 piece cast bronze removable collars. The stem guides shall be Each gate shall be provided with a sufficient number of properly spaced to support the stem as a long column, with wedges to provide a practical degree of water-tightness. Side maximum spacing not to exceed an l/r of 200. wedging devices shall be designed to make full metal-to-metal contact with the overhung portion of the frame-mounted

28 CAST IRON SLIDE GATE HydroGate

Lifts force created by operation of the gate under full heads of water specified and shall be stainless steel. Manual Lifts – The lifts shall be of the handwheel or enclosed gear type. Gears shall be steel with machine-cut teeth designed for smooth operation. The gearing and lift nut shall be mounted Installation in a cast iron housing which, in turn, shall be supported by a All parts shall be installed and adjusted by the contractor in a cast iron or structural steel pedestal to place the input shaft workmanlike manner. The manufacturer shall furnish approximately 36 in. above the floor. Lubrication fittings shall necessary drawings and detailed installation, operation and be provided in the gear housing to permit lubrication of all maintenance instructions for all components. It shall be the gears and bearings. A maximum effort of 40 lbs shall be contractor’s responsibility to handle, store, and install all parts required to operate the gate after it is unseated from its and adjust switches and controls in accordance with the wedging devices. All rising stem gates shall be supplied with a manufacturer’s detailed written recommendations. Stem clear plastic stem cover. Geared lifts shall be suitable for threads shall be lubricated prior to operation of the gate. manual and portable motor operation. Lift nuts shall be high- strength bronze. Oil bath lubrication shall not be allowed. Cleaning and Coating Cleaning and coating shall be performed at the manufacturer’s Stem Covers – Rising stem gates shall be provided with clear plant. Rust, mill scale, dirt and grease shall be removed by plastic stem covers that will not discolor, crack or become commercial blast cleaning (SSPC SP-10) method. Paint shall opaque for at least 5 years after installation. The covers shall be be manufacturer’s standard or in accordance with paint capped, vented, and long enough to allow full travel of the specifications in the paint section. gate.

Electric Powered Lifts – Motor actuator shall be a 460-V, Leakage 3-phase, 60-Hz motor with precision reduction gearing After installation and before the gates are put into operation, a enclosed in a weatherproof housing. The actuator shall be leakage test shall be performed on all cast iron slide gates in designed to raise the gate at a rate of approximately 12 in./min. accordance with AWWA C560. Excess leakage shall be Integral controls shall include a control power transformer, reduced to this maximum by adjusting the gate and its wedges. reversing controller, torque and limit switches required for controls and remote indication, space heater to prevent condensation, open-stop-close push-buttons, and gate position indicator. Where applicable, the controls shall also include a local-off-remote selector switch. Motor reduction helical gear and pinion shall be of heat-treated alloy steel. Final reduction worm shall be of alloy steel and worm gear of machined high- tensile-strength bronze. All gearing shall be proportioned for 100% overload condition. Operator shall have a declutch lever and handwheel for manual operation. Fasteners All anchor bolts, studs, assembly bolts, cap screws, nuts, and adjusting screws shall be of ample section size to withstand the Positioning large cast frame for machining

Gate Schedule

Maximum Operating Head (Ft) Size of Gate Type: Operator Quantity Opening (In.) Self-Contained or Seating Unseating Bottom Type Manual/ Material Required (W x H) Not Self-Contained Design/Operating Design/Operating Flush/Std. Electric Combination Remarks

Wall Thimble-Mounted Gate Schedule

Maximum Operating Head (Ft) Wall Size of Gate Type: Operator Thimble Quantity Opening (In.) Self-Contained or Seating Unseating Bottom Type Manual/ Type Material Required (W x H) Not Self-Contained Design/Operating Design/Operating Flush/Std. Electric Length Combination Remarks

CAST IRON SLIDE GATE 29 HydroGate Wall Thimbles

Description A wall thimble is an entirely separate part from the gate proper and is made of cast iron. Its front face is machined and drilled for attachment of a gate frame. Its spigot runs parallel to the direction of flow and is of varying length depending upon the thickness of the concrete wall. Thimbles are embedded in concrete, preferably in the original pour, and are one-piece castings.

Types of Thimbles Thimble types derive their names from the shapes of their cross sections. The most frequently used thimble, and Hydro Gate’s standard, is the F-type. The front machined face (top of the F) mates with the gate frame and holes are drilled and tapped to receive studs for holding the gate to the thimble. The small staff of the letter F acts as a cleat to hold the thimble in the wall under back pressure conditions. Except when gates are subjected to a very high unseating head, this Square flange with mechanical joint wall thimble cleat on the F is adequate to distribute the load evenly to the concrete. It also forms a water stop to prevent percolation of water around the thimble.

A thimble similar to the F is the E-type. Another full flange is added to the F and used when the back of the thimble is Features attached to an extension liner, another flange, a trash rack, or a flap gate. The E-type thimble may also be required ■ when slide gates are subjected to very high unseating heads. Cast Iron (See figure 4-1, p. 31). ■ Machined Faces, Drilled, and Tapped Mechanical joint thimbles are available in round openings for for Gate Attachment attachment of ductile iron pipe. Fasteners, packing, and ■ follower rings are available from pipe suppliers. Another Forms Opening Through Wall variation of the mechanical joint thimble is the push-on joint type (bell & spigot). These are seldom used due to the wide variation in sizes. It is to the user’s advantage to stay with the most common type of thimbles, which are the F, E, and mechanical joint types. Other types of wall thimbles require special patterns that will increase the delivery lead time.

Hydro Gate furnishes, as standard, one or two vent holes at center of the barrel on square or rectangular thimbles 30 in. and wider to vent air out of entrapment zones. If grout holes on 2 ft. centers or thread holes for pressure grouting are desired, they should be specified by the owner or consultant.

Standard lengths are 12 in. to 18 in. and use of standard lengths will facilitate early delivery.

Thimbles are stamped “Top” and have the vertical centerline located to aid in alignment.

30 CAST IRON SLIDE GATE HydroGate

Advantages When a thimble is used and the gate arrives on the job, a good machined surface is already in place for attachment of the gate Because a thimble is an entirely separate part, it can be flange. Studs are used for attaching the gate frame to the shipped prior to the gate so that it can be included in the thimble. These are quickly installed and the back of the construction forms before the concrete is poured. machined frame is pulled up against the front face of the thimble. This simple procedure eliminates the time-consuming A thimble has a machined flange for mounting of the gate. job of installing the gate on anchor bolts, aligning it, and Special thimbles, such as E-type and the mechanical joint (MJ) grouting behind the frame. thimbles, have surfaces for attaching pipe or equipment on the other end. Embedment of the thimble results in an iron-lined A thimble permits the gate to be removed and transferred to opening and a flat machined face for gate mounting. Thimbles another location for cleaning and painting. Future gate provide a solid mounting for gates under high heads to resist installations can be provided for by placing thimbles when the the hydraulic and operating forces to which gates are concrete is poured, then covering the openings with blind plate subjected. Mounting a gate directly on concrete with anchor flanges until the gates themselves are required. bolts and a sealing grout pad is not satisfactory for moderate and high heads, since the dynamic loads can cause fatigue failure of the grout. Reasonable care must be exercised in Sealant forming, aligning, and bracing of the thimble to prevent There are two options for sealing the joint between the face of warping of the flange face during concrete placement. the thimble and the back of the gate frame. The first option is to apply a mastic between the machined surfaces. Excess When a thimble is used, nearly all anchor bolts are omitted. mastic is squeezed out as nuts on studs are uniformly tightened Only those anchor bolts needed above the gate opening to until the flanges are metal to metal. This thin film of mastic support the top ends of the gate are required. Problems provides a watertight joint between the machined flanges. The associated with mounting a gate directly on concrete can be second option is to use a 1/8-in. rubber gasket, but extra care avoided with thimbles. These problems include: must be taken to obtain uniform tightening of nuts on the studs. Otherwise, warping of the gate frame may result. 1. The large amount of time required to place and secure anchor bolts in the forms; Cloth-inserted gaskets are not recommended, as the fabric has 2. The likelihood of placing anchor bolts in the wrong a tendency to rot. location; and 3. The need to realign anchors after removal of forms. Lead gaskets are not recommended because the thickness of the lead sheet is usually not uniform, and lead is not environmentally acceptable.

Figure 4-1 Typical Wall Thimble Sections

CAST IRON SLIDE GATE 31 HydroGate

Figure 4-2 Wall Thimble – “F” Type

Types of Openings “F” Thimbles for Square Flange – Square Opening Square Openings and Rectangular Flange – Rectangular Opening Opening Overall Overall Width of Size Width WT Height HT Flange WF These thimbles, used with square or rectangular opening slide (In.) (In.) (In.) (In.) or flap gates, are commonly of the F-type, supplied in standard lengths of 12 in. and 18 in., depending on the gate size and 6 x 6 14.25 14.25 4.12 wall thickness. 8 x 8 16.25 16.25 4.12 10 x 10 18.25 18.25 4.12 12 x 12 20.25 20.25 4.12 14 x 14 22.25 22.25 4.12 15 x 15 23.25 23.25 4.12 16 x 16 24.25 24.25 4.12 18 x 18 26.25 26.25 4.12 20 x 20 28.25 28.25 4.12 21 x 21 29.25 29.25 4.12 24 x 24 32.25 32.25 4.12 30 x 30 38.25 38.25 4.12 36 x 36 47.25 47.25 5.62 42 x 42 53.25 53.25 5.62 48 x 48 59.25 59.25 5.62 54 x 54 65.25 65.25 5.62 60 x 60 73.50 73.50 6.75 66 x 66 79.50 79.50 6.75 72 x 72 85.50 85.50 6.75 78 x 78 91.50 91.50 6.75 84 x 84 97.50 97.50 6.75 96 x 96 109.50 109.50 6.75 108 x 108 123.00 123.00 7.50 120 x 120 135.00 135.00 7.50 Figure 4-3 132 x 132 147.00 147.00 7.50 144 x 144 159.00 159.00 7.50 Square Flange, Square Opening

32 CAST IRON SLIDE GATE HydroGate

Opening Overall Overall Width of

Size Width WT Height HT Flange WF (In.) (In.) (In.) (In.)

48 x 24 59.25 35.25 5.62 48 x 30 59.25 41.25 5.62 48 x 36 59.25 47.25 5.62 48 x 42 59.25 53.25 5.62 48 x 54 59.25 65.25 5.62 48 x 60 61.50 73.50 6.75 48 x 72 61.50 85.50 6.75 48 x 84 61.50 97.50 6.75 48 x 96 61.50 109.50 6.75 48 x 108 63.00 123.00 7.50 54 x 36 65.25 47.25 5.62 54 x 48 65.25 59.25 5.62 60 x 30 73.50 43.50 6.75 60 x 36 73.50 49.50 6.75 60 x 42 73.50 55.50 6.75 Figure 4-4 60 x 48 73.50 61.50 6.75 Rectangular Flange, Rectangular Opening 60 x 72 73.50 85.50 6.75 60 x 84 73.50 97.50 6.75 60 x 96 73.50 109.50 6.75 60 x 120 75.00 135.00 7.50 “F” Thimbles for 72 x 36 85.50 49.50 6.75 72 x 48 85.50 61.50 6.75 Rectangular Openings 72 x 60 85.50 73.50 6.75 72 x 84 85.50 97.50 6.75 72 x 96 85.50 109.50 6.75 Opening Overall Overall Width of 72 x 108 87.00 123.00 7.50 Size Width WT Height HT Flange WF 72 x 120 87.00 135.00 7.50 (In.) (In.) (In.) (In.) 72 x 144 87.00 159.00 7.50 12 x 18 20.25 26.25 4.12 84 x 36 97.50 49.50 6.75 18 x 12 26.25 20.25 4.12 84 x 48 97.50 61.50 6.75 18 x 24 26.25 32.25 4.12 84 x 60 97.50 73.50 6.75 18 x 30 26.25 38.25 4.12 84 x 72 97.50 85.50 6.75 18 x 36 29.25 47.25 5.62 84 x 96 97.50 109.50 6.75 24 x 18 32.25 26.25 4.12 84 x 108 99.00 123.00 7.50 24 x 30 32.25 38.25 4.12 84 x 120 99.00 135.00 6.75 24 x 36 35.25 47.25 5.62 96 x 48 109.50 61.50 6.75 24 x 42 35.25 53.25 5.62 96 x 60 109.50 73.50 6.75 24 x 48 35.25 59.25 5.62 96 x 72 109.50 85.50 6.75 30 x 18 38.25 26.25 4.12 96 x 84 109.50 97.50 6.75 30 x 24 38.25 32.25 4.12 96 x 120 111.00 135.00 7.50 30 x 36 41.25 47.25 5.62 96 x 144 111.00 159.00 7.50 30 x 42 41.25 53.25 5.62 102 x 108 117.00 123.00 7.50 30 x 48 41.25 59.25 5.62 108 x 72 123.00 87.00 7.50 30 x 60 43.50 73.50 6.25 108 x 84 123.00 99.00 7.50 36 x 18 47.25 29.25 5.62 108 x 102 123.00 117.00 7.50 36 x 24 47.25 35.25 5.62 108 x 120 123.00 135.00 7.50 36 x 30 47.25 41.25 5.62 120 x 60 135.00 75.00 7.50 36 x 42 47.25 53.25 5.62 120 x 72 135.00 87.00 7.50 36 x 48 47.25 59.25 5.62 120 x 84 135.00 99.00 7.50 36 x 54 47.25 65.25 5.62 120 x 96 135.00 111.00 7.50 36 x 60 49.50 73.50 6.75 120 x 108 135.00 123.00 7.50 36 x 72 49.50 85.50 6.75 120 x 132 135.00 147.00 7.50 36 x 84 49.50 97.50 6.75 120 x 144 135.00 159.00 7.50 42 x 30 53.25 41.25 5.62 132 x 120 147.00 135.00 7.50 42 x 36 53.25 47.25 5.62 144 x 72 159.00 87.00 7.50 42 x 48 53.25 59.25 5.62 144 x 96 159.00 111.00 7.50 42 x 60 55.50 73.50 6.75 144 x 120 159.00 135.00 7.50

CAST IRON SLIDE GATE 33 HydroGate

Round Opening Thimbles

Square Front Flange – Round Opening Locations requiring round openings through the wall should Gate installation is simplified with the square flange. All studs utilize this type of thimble. The front face is cast with a square are around the outside square where they are readily flange to receive the square gate. The opening through the accessible. When a flange-back gate is used, and installation thimble is round. All four corners are cast with webs of iron to clearances are to be kept at a minimum, studs can be projected convert from the square flange to the round opening. Four through the frame of the gate to reduce side and bottom reinforcing ribs are cast on the back of the thimble to give the clearances needed. corners the stiffness and strength required. This reinforcing is embedded in the wall when the concrete is poured.

Square Front Flange, Round Opening For all round openings with square, flat, or flange back slide gates.

Opening Overall Overall Width of

Size Width WT Height HT Flange WF (In.) (In.) (In.) (In.)

6 14.25 14.25 4.12 8 16.25 16.25 4.12 10 18.25 18.25 4.12 12 20.25 20.25 4.12 14 22.25 22.25 4.12 15 23.25 23.25 4.12 16 24.25 24.25 4.12 18 26.25 26.25 4.12 20 28.25 28.25 4.12 21 29.25 29.25 4.12 24 32.25 32.25 4.12 30 38.25 38.25 4.12 36 47.50 47.50 5.62 39* 50.50 50.50 5.62 42 53.25 53.25 5.62 Figure 4-5 48 59.25 59.25 5.62 Square Front Flange, Round Opening 54 65.25 65.25 5.62 60 73.50 73.50 6.75 66 79.50 79.50 6.75 72 85.50 85.50 6.75 78 91.50 91.50 6.75 84 97.50 97.50 6.75 96 109.50 109.50 6.75 108 123.50 123.50 7.50

*One Meter Diameter

34 CAST IRON SLIDE GATE HydroGate

Round Front Flange – Round Opening This thimble consists of a round flange attached to the round Round flange-back gates can be attached to round flange opening portion of the thimble. It is recommended with round thimbles, but much larger clearances along the side and opening flap gates only. Openings for slide gates are best bottom of the gate and wall thimble are necessary. provided through use of square flange, round opening thimbles. Round Front Flange, Round Opening For round flap gates and round back slide gates only.

Opening Outside Width of

Size Diameter DO Flange WF (In.) (In.) (In.)

6 11.00 2.50 8 13.50 2.75 10 16.00 3.00 12 19.00 3.50 14 21.00 3.50 15 22.00 3.50 16 23.50 3.75 18 25.00 3.50 20 27.50 3.75 21 28.50 3.75 24 32.00 4.00 30 39.50 4.75 36 46.00 5.00 42 53.00 5.50 48 59.50 5.75 54 66.25 6.25 Figure 4-6 60 73.00 6.50 Round Front Flange, Round Opening 66 80.00 7.00 72 87.00 7.50 78 93.50 7.75 84 100.00 8.00 96 113.50 8.75 108 125.00 8.50

CAST IRON SLIDE GATE 35 HydroGate

Thimbles for Attaching Gate and Pipe Hydro Gate can furnish two styles of special thimbles to facilitate attachment of incoming or outgoing pipelines from treatment plants. Both styles utilize the square front flange for attaching the square slide gate. The opening through the thimble and wall is converted to round to match the pipe. The A other end of the E-type thimble has a round flange which can be drilled to match the commercially available flange for various cast iron, steel, or concrete pipes or pipe made from other materials. This round flange is drilled and tapped for ease of field assembly to the flange on the pipe. The length of the E thimble can be varied to match the thickness of the wall A and thus avoid any other special concrete forming or adaptation. Mechanical Joint Thimbles The mechanical joint end of the thimble is bored to receive ductile iron pipe, packing and followers. The end is drilled and tapped for studs. Figure 4-7 Mechanical Joint

"A" DIA.

SECTION A - A

Mechanical Joint Dimension

Square flange with mechanical joint wall thimble. Gate A Gate A Opening Diameter Opening Diameter (In.) (In.) (In.) (In.) 6 7.000 20 22.844 8 9.156 24 25.938 10 11.218 30 32.188 12 13.313 36 38.469 14 15.434 42 44.688 16 17.563 48 50.969 18 19.656

36 CAST IRON SLIDE GATE Our mission is to be the leading water control gate manufacturer in the world, through continuous development of an organization which promotes extraordinary customer service, superior engineering, quality products and on-time delivery.

Hydro Gate Your Source for Water Control Gates

Toll Free 800-678-8228 303-287-8531 (fax) www.hydrogate.com

CAST0105