Exceeding Your Expectations! SHOP PLAY DINE S TAY
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Practical Implementation of the Stream Function Method for Design of Arbitrary-Geometry Gradient Coils
Practical Implementation of the Stream Function Method for Design of Arbitrary-Geometry Gradient Coils R. A. Lemdiasov1, R. Ludwig2 1Insight Neuroimaging Systems, Worcester, MA, United States, 2ECE Department, Worcester Polytechnic Institute, Worcester, MA, United States Introduction Over the past several years a variety of theoretical design methods for the construction of gradient coils have been developed. For instance, in [1] D. Green et al. minimize a weighted combination of power, inductance, and the square difference between actual and desired field. Representing the current as a Fourier series they find optimal coefficients that minimize the cost function. Our work is a continuation of last year’s research reported in [2]. In this paper we describe an alternative implementation of a stream function method to design gradient coils. Using this method we are able to determine the current distribution to achieve a prescribed magnetic field distribution in the Region of Interest (ROI) that is largely independent of the shape of the current-carrying surface. We will demonstrate the successful implementation of our approach as well as experimental results. Theory As mentioned above, a cost function Φ can be introduced in the form K Φ = 1 ()() ()− ()+ 2 +α ∑W rk Bz rk Bdes,z rk Boff ,z Wmagn (1) 2 k =1 () () where W r is a weight function, BZ is the z-component of the total field, Bdes,z r as well as Boff,z are the z-components of the desired and offset magnetic field, and α Wmagn is magnetic energy with being a weight coefficient. In (1), the first term denotes the square deviation of the magnetic field from the prescribed field, and the second term is the magnetic energy of the coil. -
Types of Tap
Types of Tap HAND TAPS ISO 529 These are straight flute general purpose tools which can be used for both machine or hand tapping. They are generally the most economical tool for use on production runs, but are best on materials that produce chips, or where the swarf breaks readily. Where deep holes are to be tapped, in materials which produce stringy swarf, serial taps may be needed, especially for coarse threads. ISO 529 hand taps can be supplied in sets of three; bottom, second and taper leads, or individually. BOTTOM TAPS have a chamfer (lead) of 1–2 threads, the angle of the lead being around 18 degrees per side. They are used to produce threads close to the bottom of blind holes. SECOND TAPS have a lead of 3-5 threads at 8 degrees per side. They are the most popular and can be used for through holes, or blind holes where the thread does not need to go right to the bottom. TAPER TAPS have a lead of 7-10 threads at 5 degrees per side. The taper lead distributes the cutting force over a large area, and the taper shape helps the thread to start. They can therefore be used to start a thread prior to use of second or bottom leads, or for through holes. IMPORTANT NOTE ON TERMINOLOGY! In the U.K. bottom taps are often referred to as ‘plugs’. In North America second taps are often referred to as ‘plugs’! This can easily lead to confusion. To avoid problems when ordering it is best to use the terms bottom, second and taper. -
CBL & ASSOCIATES PROPERTIES INC (Form: 8-K
SECURITIES AND EXCHANGE COMMISSION FORM 8-K Current report filing Filing Date: 2002-04-25 | Period of Report: 2002-03-31 SEC Accession No. 0000910612-02-000004 (HTML Version on secdatabase.com) FILER CBL & ASSOCIATES PROPERTIES INC Mailing Address Business Address 61048 LEE HIGHWAY SUITE ONE PARK PLACE CIK:910612| IRS No.: 621545718 | State of Incorp.:DE | Fiscal Year End: 1231 300 6148 LEE HWY SUITE 300 Type: 8-K | Act: 34 | File No.: 001-12494 | Film No.: 02621546 ONE PARK PLACE CHATTANOOGA TN 37421 SIC: 6798 Real estate investment trusts CHATTANOOGA TN 37421 4238550001 Copyright © 2012 www.secdatabase.com. All Rights Reserved. Please Consider the Environment Before Printing This Document Securities Exchange Act of 1934 -- Form 8-K SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 FORM 8-K PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 Date of Report: April 25, 2002 ------------------------------------------------------------------------------- CBL & ASSOCIATES PROPERTIES, INC. ------------------------------------------------------------------------------- (Exact name of registrant as specified in its charter) Delaware 1-12494 62-1545718 ---------------------- -------------------- ------------------------ (State or other (Commission (IRS Employer jurisdiction of File Number) Identification Number) incorporation) 2030 Hamilton Place Boulevard, Chattanooga, TN 37421 ------------------------------------------------------------------------------- (Address of principal executive offices) Registrant's telephone number, including area code: ------------------------------------------------------------------------------- (423) 855-0001 CBL & ASSOCIATES PROPERTIES, INC. Conference Call Outline - First Quarter 2002 April 25, 2002 @ 10:00 a.m. EDT Good morning. We appreciate your participation in today's call to discuss our results for the first quarter of 2002. With me today is Stephen Lebovitz, our President, and Kelly Sargent, our Director of Investor Relations, who will first read our Safe Harbor disclosure. -
Voluntary Petition for Non-Individuals Filing for Bankruptcy 04/20
Case 21-31717 Document 1 Filed in TXSB on 05/26/21 Page 1 of 54 Fill in this information to identify the case: United States Bankruptcy Court for the Southern District of Texas Case number (if known): Chapter 11 Check if this is an amended filing Official Form 201 Voluntary Petition for Non-Individuals Filing for Bankruptcy 04/20 If more space is needed, attach a separate sheet to this form. On the top of any additional pages, write the debtor’s name and the case number (if known). For more information, a separate document, Instructions for Bankruptcy Forms for Non-Individuals, is available. 1. Debtor’s name Laredo Outlet Shoppes, LLC 2. All other names debtor used N/A in the last 8 years Include any assumed names, trade names, and doing business as names 3. Debtor’s federal Employer Identification Number (EIN) 81-1563566 4. Debtor’s address Principal place of business Mailing address, if different from principal place of business 2030 Hamilton Place Blvd. Number Street Number Street CBL Center, Suite 500 P.O. Box Chattanooga Tennessee 37421 City State ZIP Code City State ZIP Code Location of principal assets, if different from principal place of business Hamilton County County 1600 Water Street Number Street Laredo Texas 78040 City State ZIP Code 5. Debtor’s website (URL) www.cblproperties.com 6. Type of debtor ☒ Corporation (including Limited Liability Company (LLC) and Limited Liability Partnership (LLP)) ☐ Partnership (excluding LLP) ☐ Other. Specify: Official Form 201 Voluntary Petition for Non-Individuals Filing for Bankruptcy Page 1 WEIL:\97969900\8\32626.0004 Case 21-31717 Document 1 Filed in TXSB on 05/26/21 Page 2 of 54 Debtor Laredo Outlet Shoppes, LLC Case number (if known) 21-_____ ( ) Name A. -
Brookfield Square Area Redevelopment Strategy
City of Brookfield Wisconsin Transportation Service Location: Targeted Intervention Areas Interstate Highway 94 15 miles west of Milwaukee, WI OPEN FOR BUSINESS United States Highways 18 & 45 65 miles east of Madison, WI The City of Brookfield, Wisconsin is a dynamic western suburb of State Trunk Highways 59 & 190 90 miles north of Chicago, IL Milwaukee, offering high quality development opportunities, 124 Lilly Lilly Barker Canadian Pacific Railroad outstanding demographics, and visionary City planning and Pilgrim Calhoun Calhoun Port of Milwaukee County: Waukesha municipal leadership. Our thriving city remains Southeastern Brookfield Springdale Springdale Wisconsin’s address for success. Businesses of all kinds find Air Service Size: 26 Square Miles Brookfield a desirable location for commercial expansion. Many Capitol Mitchell International, 17 miles Lilly- business owners and their employees choose to live in Brookfield. Brookfield- Calhoun- Chicago O’Hare International, 88 miles Population: 38,823 Brookfield understands that economic growth and future commercial Capitol Node Capitol Node Capitol Node Waukesha Crites Field, 6 miles investments must be balanced with the needs of existing residential Median Age: 42.5 Northwest neighborhoods, and has prepared its Master Plan to achieve an Gateway Node Office Parks 124 St.- Ten office parks within the City Per Capita Income (2000): appropriate balance. Capitol Node Covers more than 400 acres $37,292 Village Area Four major office parks along Bluemound Road Median Household Income (2000): $76,132 North Retail Centers ADVOCATES FOR QUALITY DEVELOPMENT 13 retail centers Total Housing Units: 14,203 The 2020 Master Plan for the City of Brookfield has been created 5 major shopping centers within the context of “balanced growth.” Under a balanced growth Civic Center More than 5.4 million square feet Median Equalized Home Value approach the City will strategically target and concentrate Brookfield Square is the only regional (2002): $242,330 commercial development and redevelopment in selected areas. -
Book-Matching Legs 1 Diagonally Opposed Legs
Tips & Tricks Switch location of Rotate remaining Book-matching legs 1 diagonally opposed legs. 2 legs 180°. When making a project with four square legs, such as the jewelry chest on page Use riftsawn stock 36, a nice visual touch is to configure the (with diagonal annular rings). legs to display book-matched grain when viewed from any side of the piece. Here’s how to do it: Begin with a square piece of riftsawn stock the length of the legs. It Triangle reference should be twice the thickness of a finished mark leg, plus about 1/4". Draw a triangle on one end, and then rip the piece into quarters to make four individual leg blanks. Using Book-matched Book-matched the triangle as a reference, reconstitute the faces faces pieces back into their original order, and number the ends as shown. Then switch the position of two diagonally placed legs, Share a Slick Tip. Win Cash or a Prize! and rotate the remaining two legs 180°. Awards Send your ideas to: Top Tip award: $250 Woodcraft Gift Card Tips & Tricks, Woodcraft Magazine, Maintaining this relationship of the legs Published illustrated tip: $125 P.O. Box 7020, Parkersburg, WV 26102-7020 on the project will create book-matched Published non-illustrated tip $75 or visit woodcraftmagazine.com and click “contact”. leg grain on each face of the piece. Important: Please include your phone number, as an editor may need to call you if your trick —Geoffrey Noden, Trenton, New Jersey is considered for publication. Published tips become the property of Woodcraft Magazine. -
Lakefront Festival of Arts Fact Sheet
LAKEFRONT FESTIVAL OF ARTS FACT SHEET FESTIVAL HOURS Friday, June 19: 12–8 p.m. Saturday, June 20: 10 a.m.–7 p.m. Sunday, June 21: 10 a.m.–5 p.m. MUSEUM HOURS Friday, June 19: 10 a.m–8 p.m. Saturday, June 20: 10 a.m.–7 p.m. Sunday, June 21: 10 a.m.–5 p.m. TICKETS General public: $10 at the gate Kids 16 and under: Free with a paid adult MAM members: $7 with valid membership card Advance tickets: $7 when ordered at www.mam.org or at one of several advanced retail locations, listed on www.mam.org/lfoa Purchase a ticket to LFOA and receive 50% off Museum admission! ADVANCED TICKET LOCATIONS • MAM.org – advanced and combo tickets • Participating Pick 'n Save® Stores • Affordable Art & Frames: 14685 W Capitol Dr, Brookfield • Artist and Display Supply, Inc., 9015 W. Burleigh St., Milwaukee • Boston Store: Grand Avenue, Bayshore, Brookfield Square, Furniture Gallery Brookfield, Mayfair, Regency Mall Racine, and Southridge Malls • Cudahy Tap Room: 3558 E. Barnard, Cudahy • Elite Fitness & Racquet Clubs: Highland Elite; 13825 W. Burleigh, Brookfield; North Shore Elite; 5750 N. Glen Park, Glendale • Fiddleheads Espresso Bar and Café, 192 S. Main St., Thiensville • Hawks Nursery, 12217 W. Watertown Plank Rd., Wauwatosa • Katie Gingrass Gallery 241 N. Broadway, Milwaukee • The Little Read Book, 7603 W. State St., Wauwatosa • Milwaukee Art Museum Store, 700 N. Art Museum Dr., Milwaukee • Mequon Chiropractic: 10521 N Port Washington Rd., Mequon • Samson Family Jewish Community Center of Greater Milwaukee, 6255 N. Santa Monica Blvd., Whitefish Bay • Sommer’s Suburu: 7211 Mequon Rd., Mequon • Sven’s Cafe: 2699 S. -
CBL & Associates Properties 2012 Annual Report
COVER PROPERTIES : Left to Right/Top to Bottom MALL DEL NORTE, LAREDO, TX CROSS CREEK MALL, FAYETTEVILLE, NC BURNSVILLE CENTER, BURNSVILLE, MN OAK PARK MALL, KANSAS CITY, KS CBL & Associates Properties, Inc. 2012 Annual When investors, business partners, retailers Report CBL & ASSOCIATES PROPERTIES, INC. and shoppers think of CBL they think of the leading owner of market-dominant malls in CORPORATE OFFICE BOSTON REGIONAL OFFICE DALLAS REGIONAL OFFICE ST. LOUIS REGIONAL OFFICE the U.S. In 2012, CBL once again demon- CBL CENTER WATERMILL CENTER ATRIUM AT OFFICE CENTER 1200 CHESTERFIELD MALL THINK SUITE 500 SUITE 395 SUITE 750 CHESTERFIELD, MO 63017-4841 strated why it is thought of among the best 2030 HAMILTON PLACE BLVD. 800 SOUTH STREET 1320 GREENWAY DRIVE (636) 536-0581 THINK 2012 Annual Report CHATTANOOGA, TN 37421-6000 WALTHAM, MA 02453-1457 IRVING, TX 75038-2503 CBLCBL & &Associates Associates Properties Properties, 2012 Inc. Annual Report companies in the shopping center industry. (423) 855-0001 (781) 398-7100 (214) 596-1195 CBLPROPERTIES.COM HAMILTON PLACE, CHATTANOOGA, TN: Our strategy of owning the The 2012 CBL & Associates Properties, Inc. Annual Report saved the following resources by printing on paper containing dominant mall in SFI-00616 10% postconsumer recycled content. its market helps attract in-demand new retailers. At trees waste water energy solid waste greenhouse gases waterborne waste Hamilton Place 5 1,930 3,217,760 214 420 13 Mall, Chattanooga fully grown gallons million BTUs pounds pounds pounds shoppers enjoy the market’s only Forever 21. COVER PROPERTIES : Left to Right/Top to Bottom MALL DEL NORTE, LAREDO, TX CROSS CREEK MALL, FAYETTEVILLE, NC BURNSVILLE CENTER, BURNSVILLE, MN OAK PARK MALL, KANSAS CITY, KS CBL & Associates Properties, Inc. -
Fire Before Matches
Fire before matches by David Mead 2020 Sulang Language Data and Working Papers: Topics in Lexicography, no. 34 Sulawesi Language Alliance http://sulang.org/ SulangLexTopics034-v2 LANGUAGES Language of materials : English ABSTRACT In this paper I describe seven methods for making fire employed in Indonesia prior to the introduction of friction matches and lighters. Additional sections address materials used for tinder, the hearth and its construction, some types of torches and lamps that predate the introduction of electricity, and myths about fire making. TABLE OF CONTENTS 1 Introduction; 2 Traditional fire-making methods; 2.1 Flint and steel strike- a-light; 2.2 Bamboo strike-a-light; 2.3 Fire drill; 2.4 Fire saw; 2.5 Fire thong; 2.6 Fire plow; 2.7 Fire piston; 2.8 Transporting fire; 3 Tinder; 4 The hearth; 5 Torches and lamps; 5.1 Palm frond torch; 5.2 Resin torch; 5.3 Candlenut torch; 5.4 Bamboo torch; 5.5 Open-saucer oil lamp; 5.6 Footed bronze oil lamp; 5.7 Multi-spout bronze oil lamp; 5.8 Hurricane lantern; 5.9 Pressurized kerosene lamp; 5.10 Simple kerosene lamp; 5.11 Candle; 5.12 Miscellaneous devices; 6 Legends about fire making; 7 Additional areas for investigation; Appendix: Fire making in Central Sulawesi; References. VERSION HISTORY Version 2 [13 June 2020] Minor edits; ‘candle’ elevated to separate subsection. Version 1 [12 May 2019] © 2019–2020 by David Mead All Rights Reserved Fire before matches by David Mead Down to the time of our grandfathers, and in some country homes of our fathers, lights were started with these crude elements—flint, steel, tinder—and transferred by the sulphur splint; for fifty years ago matches were neither cheap nor common. -
Pew Body Specifications
Page 1 SPECIFICATIONS FOR: 54-US3 SEATS: Upholstered foam seat. Construction to consist of ¾” cabinet grade plywood seat foundation reinforced with wood members running horizontally and continuously along front and back edge of seat for maximum strength and stability. 3” thick, 1.85 lb. density foam glued to seat foundation. Upholstered with choice of fabric. Fabric is tightly stretched using even pneumatic pressure, with edges tucked, folded, and stapled to underseat. BACKS: Contoured 9-ply laminated back. Constructed of ½” center core of cabinet grade plywood, 1/8” cross banding of 68 lb. density hardboard both sides, shaped under heated hydraulic pressure with front and back face to be bookmatched selected specie veneer. Finished with 5/4 solid wood cap rail with a tongue and grove joint securely fastened to back, and a solid wood undercap molding. * Also available with spring seating system (optional). * W Option – 2” wider back available 313 Prospect Street • P. O. Box 217 • New Holland, PA 17557-0217 • 800-648-9663 • FAX (717) 354-2181 email: [email protected] • website: http://www.newhollandwood.com Page 2 SPECIFICATIONS FOR: 54-LS SEATS: Contoured 7-ply laminated seat. Constructed of a 5/8” center core of cabinet grade plywood, 1/8” cross banding of 68 lb. density hardboard both sides, shaped under heated hydraulic pressure with top face to be bookmatched selected specie veneer, underside to be continuous Yorkite material. Finished with a 5/8 solid wood cap rail with a tongue and groove joint securely fastened to back. BACKS: Contoured 9-ply laminated back. Constructed of ½” center core of cabinet grade plywood, 1/8” cross banding of 68 lb. -
Johnson Creek Premium Outlets
JOHNSON CREEK, WISCONSIN PROPERTY OVERVIEW JOHNSON CREEK PREMIUM OUTLETS® JOHNSON CREEK, WI JOHNSON CREEK PREMIUM OUTLETS JOHNSON CREEK, WI 26 MAJOR METROPOLITAN AREAS SELECT TENANTS 45 Wisconsin Dells 41 Madison: 30 miles adidas, American Eagle Outfitters, Ann Taylor Factory Store, 151 Milwaukee: 35 miles Banana Republic Factory Store, Calvin Klein Company Store, Carter’s Outlet, Coach, Columbia Sportswear, Crocs, Eddie Bauer Outlet, Gap Watertown Outlet, Gymboree Outlet, LOFT Outlet, Nike Factory Store, OshKosh Madison Milwaukee RETAIL Lake Mills 94 B’gosh, Polo Ralph Lauren Factory Store, Talbots, Tommy Hilfiger Jefferson GLA (sq. ft.) 278,000; 60 stores Company Store, Under Armour 14 90 Fort Atkinson 26 12 OPENING DATES TOURISM / TRAFFIC 43 Opened 1998 The center is located on the northwest quadrant of I-94 and Hwy. 26 and Expanded 1999 is en route to the University of Wisconsin and Wisconsin Dells (2.5 million annual visitors). Average daily traffic on I-94 is 29,000 and on Hwy. 26, over 13,000. PARKING RATIO 5.22:1 LOCATION / DIRECTIONS I-94 at Hwy. 26. Thirty miles east of Madison and 35 miles west of RADIUS POPULATION Milwaukee, Wisconsin. 15 miles: 114,415 30 miles: 703,139 — Take I-94 to Hwy. 26, Exit 267 45 miles: 2,511,808 AVERAGE HH INCOME 30 miles: $80,407 Information as of 5/1/17. Source: SPG Research; trade area demographic information per STI: PopStats (2016). MASTER PLAN DRESSBARN OLD 26 RD. NIKE FACTORY STORE GAP OUTLET I-94 COLUMBIA SPORTSWEAR POLO RALPH LAUREN UNDER FACTORY STORE ARMOUR EDDIE BAUER OUTLET OLD NAVY NORTH LINMAR LN. -
Bankruptcy Forms for Non-Individuals, Is Available
Case 17-31455 Doc 1 Filed 09/01/17 Entered 09/01/17 17:27:08 Desc Main Document Page 1 of 53 Fill in this information to identify your case: United States Bankruptcy Court for the: WESTERN DISTRICT OF NORTH CAROLINA Case number (if known) Chapter 11 Check if this an amended filing Official Form 201 Voluntary Petition for Non-Individuals Filing for Bankruptcy 4/16 If more space is needed, attach a separate sheet to this form. On the top of any additional pages, write the debtor's name and case number (if known). For more information, a separate document, Instructions for Bankruptcy Forms for Non-Individuals, is available. 1. Debtor's name Portrait Innovations, Inc. 2. All other names debtor used in the last 8 years Include any assumed names, trade names and doing business as names 3. Debtor's federal Employer Identification 56-2179394 Number (EIN) 4. Debtor's address Principal place of business Mailing address, if different from principal place of business 2016 Ayrsley Town Blvd., Suite 200 Charlotte, NC 28273 Number, Street, City, State & ZIP Code P.O. Box, Number, Street, City, State & ZIP Code Mecklenburg Location of principal assets, if different from principal County place of business Number, Street, City, State & ZIP Code 5. Debtor's website (URL) www.portraitinnovations.com 6. Type of debtor Corporation (including Limited Liability Company (LLC) and Limited Liability Partnership (LLP)) Partnership (excluding LLP) Other. Specify: Official Form 201 Voluntary Petition for Non-Individuals Filing for Bankruptcy page 1 Case 17-31455 Doc 1 Filed 09/01/17 Entered 09/01/17 17:27:08 Desc Main Document Page 2 of 53 Debtor Portrait Innovations, Inc.