Quick viewing(Text Mode)

New-Horizons-11Th-Hour-Gear.Pdf

New-Horizons-11Th-Hour-Gear.Pdf

11th Hour Gear

Fabric R equirements:

56” width fabric *45” width fabric for straight leg pants **Additional fabric may be required to match stripes or one way designs. Recommended Fabrics and Notions: Knit Fabric - (Stretch fabric with at least 25% stretch) Sweatshirt Fleece, French Terry, Lycra, , Cotton Inter- lock, Poly Blends, Medium-Thick Knits. (Pre-wash your fabric). - (For straight leg pants only) Cotton, Cotton Blends, , Fleece, Broadcloth, , Chambray, , and types. (Pre-wash your fabric). Ribbing - (Stretch Fabric with 50% stretch) Ribbing, Cotton Lycra, Knits with at least 5% and excellent recovery. (Pre-wash your fabric). Drawstring (Optional) Feather weight Fusible Interfacing (For use with drawstring) 2 eyelets (Optional) 1/4” center 1 1/4” Wide elastic (non roll) 1 yard (For Bottoms) Size Chart and Finished Measurements:

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Main Pg. 2 11th Hour Gear © New Horizons Designs 2017 Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 3 11th Hour Gear © New Horizons Designs 2017 Stretch Gauge:

Tips for Sewing with Knits: • Use a ball point needle or jersey needle in your serger or sewing machine.

• If you’re not using a serger, use a stretch stitch on your sewing machine. It will look like this:

• If your sewing machine doesn’t have a stretch stitch, use the zigzag stitch and low- er the width to 1 mm.

• To allow for a greater amount of stretch on your stitch, lower your tension by one number; if you usually have your tension set at a 5, lower it to a 4.

• When sewing with knits it is important to not stretch the fabric as you sew. If you’re experiencing wavy seams, try adjusting the presser foot to a lighter pres- sure.

• When using a serger, set your differential feed to 1.5 with a stitch length of 2.5 for medium weight knits, 1.0 with a 2.0 stitch length for light weight knits and 2.0 with a 3.0 stitch length for thick knits. (All sergers are different, use this as a guide- line.)

• For knits that roll at the edge, press with starch.

• Use Wooly or stretch thread in the bobbin of your sewing machine for greater stretch and tunneling issues from a double needle. This also works well with a straight stitch for topstitching, not hemming.

• Use Wooly Nylon or stretch thread in the upper looper of your serger for fabrics with a great amount of stretch.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 4 11th Hour Gear © New Horizons Designs 2017 Printing Instructions (Pants): To print the pattern, make sure page scaling is set to none and landscape is selected. Print off the page with the 2” test box (page 28) and adjust settings as needed to match size. Print off the rest of the pattern. Tape the pattern together with the num- bers in sequence to make this:

Leave page numbers, text, and paper size selected.

When taping the no trim pag- es together, each page will have a border on the bottom and right side. Overlap the adjoining pages to these bor- ders. There will be a small gap that won’t print.

Lay the pattern pieces on the fabric following the grain. The grain will be the length of your fabric.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 5 11th Hour Gear © New Horizons Designs 2017 Printing Instructions (Joggers): To print the pattern, make sure page scaling is set to none and landscape is selected. Print off the page with the 2” test box (page 46) and adjust settings as needed to match size. Print off the rest of the pattern. Tape the pattern together with the num- bers in sequence to make this:

Leave page numbers, text, and paper size selected.

When taping the no trim pag- es together, each page will have a border on the bottom and right side. Overlap the adjoining pages to these bor- ders. There will be a small gap that won’t print.

Lay the pattern pieces on the fabric following the grain. The grain will be the length of your fabric.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 6 11th Hour Gear © New Horizons Designs 2017 Printing Instructions (Shirt): To print the pattern, make sure page scaling is set to none and landscape is selected. Print off the page with the 2” test box (page 62) and adjust settings as needed to match size. Print off the rest of the pattern. Tape the pattern together with the num- bers in sequence to make this:

Leave page numbers, text, and paper size selected.

When taping the no trim pag- es together, each page will have a border on the bottom and right side. Overlap the adjoining pages to these bor- ders. There will be a small gap that won’t print.

Lay the pattern pieces on the fabric following the grain. The grain will be the length of your fabric.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 7 11th Hour Gear © New Horizons Designs 2017 Cutting the Pants/Shorts: Pants/shorts with pockets: (Woven or Knit) • Cut 2 Front pieces (mirror image). • Cut 2 Back pieces (mirror image). • Cut 2 Pocket A pieces (mirror image). • Cut 2 Pocket B pieces (mirror image). • Attach Faux Fly piece to Front Pant piece before cutting (Optional).

Pants/shorts with no pockets: (Woven or Knit) • Cut 2 Front pieces (mirror image). • Cut 2 Back pieces (mirror image). • Attach Faux Fly piece to Front Pant piece before cutting (Optional).

Ribbing: • Cut 1 Front Waistband piece on the fold. • Cut 1 Back Waistband piece on the fold.

Interfacing: • Cut 2 1”x 1” squares. (Pattern piece not included).

Elastic: • Cut 1 piece of elastic the width of the waist minus 2”, or use these measurements: 3-6m 15 ” 6-12m 16” 12-18m 17 ” 18-24m 18 ” 2T 18 ” 3T 18.5” 4T 19 ” 5T 19.5” 6 20” 7 20.5” 8 21.5” 10 22.5” 12 23.5” 14 25” 16 26.5”

Drawstring length: 2 times the waist measurement.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 8 11th Hour Gear © New Horizons Designs 2017 Cutting the Joggers: Joggers with no pockets: • Cut 2 Front pieces (mirror image). • Cut 2 Back pieces (mirror image).

Joggers with pockets: • Cut 2 Front pieces (mirror image). • Cut 2 Back pieces (mirror image). • Cut 2 Pocket A pieces (mirror image). • Cut 2 Pocket B pieces (mirror image).

Ribbing: • Cut 1 Front Waistband piece on the fold. • Cut 1 Back Waistband piece on the fold. • Cut 2 Cuff pieces.

Knee Patches: • Cut 2 Knee Patch pieces (Optional).

Interfacing: • Cut 2 1”x 1” squares. (Pattern piece not included).

Elastic: • Cut 1 piece of elastic the width of the waist minus 2”, or use these measurements: 3-6m 15 ” 6-12m 16” 12-18m 17 ” 18-24m 18 ” 2T 18 ” 3T 18.5” 4T 19 ” 5T 19.5” 6 20” 7 20.5” 8 21.5” 10 22.5” 12 23.5” 14 25” 16 26.5”

Drawstring length: 1 ½ times the waist measurement.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 9 11th Hour Gear © New Horizons Designs 2017 Cutting the Shirt: Shirt with Pocket: • Cut 1 Front piece on the fold. • Cut 1 Back piece on the fold. • Cut 1 Pocket A piece (fabric facing up). • Cut 1 Pocket B piece (fabric facing up). • Cut 2 Sleeve pieces (mirror image). • Cut 1 Neck Band piece on the fold. • Cut 2 Cuff Pieces (long sleeve only).

• After cutting the front bodice on the fold, lay it flat and cut out the pocket cut-out.

Shirt with no Pocket: • Cut 1 Front piece on the fold. • Cut 1 Back piece on the fold. • Cut 2 Sleeve pieces (mirror image). • Cut 1 Neck Band piece on the fold. • Cut 2 Cuff Pieces (long sleeve only).

Muscle Tee: • Cut 1 Front piece on the fold. • Cut 1 Back piece on the fold. • Cut 1 Neck Band piece on the fold. • Cut 2 Arm Band Pieces (muscle tee only).

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 10 11th Hour Gear © New Horizons Designs 2017 Sewing the Pants/Shorts: Seam Allowance is 3/8” unless otherwise stated.

• Take one of the Pocket A pieces and place it right sides together with a front pant/shorts piece. Stitch along the side. or zigzag the edges.

• Fold the pocket piece under, press, and top stitch in place.

• Place Pocket piece B right sides to- gether with Pocket A. Stitch togeth- er through only the pocket pieces. Serge or zigzag the edges.

• Baste the pocket in place at the waistline.

• Take the corresponding back piece and place it right sides together with the front piece, aligning the sides. Stitch together along out- seam and serge or zigzag the edges.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 11 11th Hour Gear © New Horizons Designs 2017 • Now align the pieces at the inseam and stitch together. Serge or zigzag the edges.

• Repeat with the other leg.

• Turn one of the pant leg pieces No Faux Fly Faux Fly right side out and place it inside the other pant leg.

• Align the center seams and stitch No Faux Fly Faux Fly together. For the faux fly, stitch the edges together. Serge or zigzag the edges.

• For the faux fly, clip through the seam allowance under the bottom curve of the fly. Do not clip through the stitching.

If you’re not sewing the faux fly, skip to the second box on the next page.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 12 11th Hour Gear © New Horizons Designs 2017 • Fold both layers of the faux fly to one side and press. The fold should line up with the center seam (1¼” from the edge of the fly piece). Top stitch in place through all layers around the outer curve. Stitch again 1/8” in from the previous stitching.

• For the drawstring option, take the Front Waistband piece and mark the eyelet placement from the pat- tern piece.

For no drawstring, skip to the last box on this page.

• Iron two 1” squares onto the wrong side of the waistband, covering your eyelet marks.

• Add your eyelets to the waistband, or sew two buttons holes 3/8” wide.

• Take the Back Waistband piece and place it right sides together with the front piece. Sew the ends to- gether.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 13 11th Hour Gear © New Horizons Designs 2017 • Fold the waistband together length- wise (wrong sides together).

• Take your elastic you cut previously and stitch the ends together, overlap- ping 1/2”.

• Place your elastic and drawstring in- side the waistband. • Now place the waistband inside the top of the pants. (Make sure the drawstrings are right sides together with pants).

• Stretch to fit and align the edges. Stitch in place. Serge or zigzag the edges.

• For a professional finish, stitch through all the layers of the waist band above and below the draw- string. Do not stitch through the drawstring.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 14 11th Hour Gear © New Horizons Designs 2017 • Fold the bottom of the pant/shorts under 1/2”, then another 1/2”. Edge stitch in place.

Sewing the Joggers: Seam Allowance is 3/8” unless otherwise stated.

To skip knee patches, go on to the second box of page 16.

• Option 1: Take the Knee Patch pieces and finish the edges with a serger.

• Using the pattern piece as a guide, place the Knee Patch pieces onto the right side of the joggers. Stitch in place.

• Option 2: Using the pattern piece as a guide, place the Knee Patch pieces with unfinished edges onto the right side of the joggers. Stitch in place.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 15 11th Hour Gear © New Horizons Designs 2017 • Option 3: Using the pattern piece as a guide, place the Knee Patch pieces with unfinished edges onto the right side of the joggers. Stitch in place with a tight zigzag stitch, covering the raw edges. (It would be best to use interfacing as a sta- bilizer on the wrong side of the pants.) • Take one of the Pocket A pieces and place it right sides together with a front joggers piece. Stitch along the side.

• Fold the pocket piece under, press, and top stitch in place.

• Place Pocket piece B right sides together with Pocket A. Stitch only the pockets together.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 16 11th Hour Gear © New Horizons Designs 2017 • Baste the pocket in place at the waistline.

• (Optional) Topstitch the front of the pants around the pocket edges).

• Take the corresponding back piece and place it right sides together with the front piece, aligning the sides. Stitch together.

• Now align the pieces at the inseam and stitch together.

• Repeat with the other leg.

• Turn one of the pant leg pieces right side out and place it inside the other pant leg.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 17 11th Hour Gear © New Horizons Designs 2017 • Align the center seams and stitch together.

• For the drawstring option, take the Front Waistband piece and mark the eyelet placement from the pat- tern piece.

For no drawstring, skip to the last box on this page.

• Iron two 1” squares onto the wrong side of the waistband, covering your eyelet marks.

• Add your eyelets to the waistband, or sew two buttons holes 3/8” wide.

• Take the Back Waistband piece and place it right sides together with the front piece. Sew the ends to- gether.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 18 11th Hour Gear © New Horizons Designs 2017 • Fold the waistband together length- wise (wrong sides together).

• Take your elastic you cut previously and stitch the ends together, over- lapping 1/2”.

• Place your elastic and drawstring inside the waistband. • Now place the waistband inside the top of the pants. (Make sure the drawstrings are right sides together with pants).

• Stretch to fit and align the edges. Stitch in place.

• For a professional finish, stitch through all the layers of the waist band above and below the draw- string. Do not stitch through the drawstring.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 19 11th Hour Gear © New Horizons Designs 2017 • Next take the cuff pieces and fold them right sides together width- wise. Stitch in place.

• Turn the cuff wrong sides together, matching up the raw edges.

• Place the cuff right sides together inside one of the legs, matching the seam to the inseam.

• Stretch to fit and stitch in place.

• Repeat with the other side.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 20 11th Hour Gear © New Horizons Designs 2017 Sewing the Shirt: Seam Allowance is 3/8” unless otherwise stated.

For no pocket, skip to the beginning of page 23.

• For the front pocket, clip the inside corner of the pocket cut out 3/8”.

• Place Pocket A right sides together with the Front Shirt piece. Stitch together at the pocket cut out line.

• Unfold the pocket piece and lay the bodice flat. Press the seam allow- ance towards the pocket piece. Un- derstitch 1/8” from the seam. (This is stitching through the seam allowance and the pocket piece, but not the front bodice.)

• Fold the pocket piece around to the wrong side of the bodice. Press flat. Fold the bodice under 3/8” at the top of the pocket cut out.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 21 11th Hour Gear © New Horizons Designs 2017 • Take Pocket piece B and place it right sides together with Pocket piece A.

• Turn the bodice so the right side is facing up. Fold the bodice down to reveal the pocket piec- es. Align the top of the pocket pieces and the top of the pocket cut-out. Stitch in place. (The stitching should fall just below the clipped cor- ner of the pocket cut out.) Do not stitch through the front of the shirt, only through the top of the pock- et cut-out and the pocket pieces.

• Lay the bodice flat and topstitch through all layers, securing the top of the pocket.

• Stitch the bottom of the pocket opening in place 2” above the edge.

• Baste the pocket in place at the side and bottom of the bodice.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 22 11th Hour Gear © New Horizons Designs 2017 • Take the Front and Back bodice pieces and place them right sides together aligned at the shoulders. Stitch in place.

• Take the Neck Band piece and fold it wrong sides together widthwise. Sew the ends together.

• Now fold it together lengthwise and mark the center.

• Place the band inside the neck of the shirt, right sides together, raw edg- es together. Match the center front and the center back of the shirt with the center front and back neckline. Stretch the band to fit and stitch in place.

• Place the bodices right sides to- gether, aligning the armpit seams and stitch in place.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 23 11th Hour Gear © New Horizons Designs 2017 • Take the sleeve pieces and fold them right sides together width- wise. Stitch in place.

• Turn the sleeve right side out and place it inside the arm hole, right sides together, raw edges match- ing. Make sure to match the sleeve seam to the armpit seam.

• Stitch in place.

• Repeat for the other side.

• For the short sleeve, fold under the bottom of the sleeve 3/4” and edg- estitch in place.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 24 11th Hour Gear © New Horizons Designs 2017 • For the long sleeve, take the cuff pieces and fold them right sides to- gether widthwise. Stitch in place.

• Turn the cuff wrong sides together, matching up the raw edges.

• Place the cuff right sides together inside one of the sleeves, matching the seams.

• Stretch to fit and stitch in place.

• Repeat with the other side.

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 25 11th Hour Gear © New Horizons Designs 2017 • For the tank: take one of the Arm Band pieces and fold it wrong sides together widthwise. Sew the ends together.

• Now fold it together lengthwise and mark the center.

• Place the arm band right sides to- gether inside one of the armscyes, matching the seams. Stretch to fit and stitch in place.

• Repeat with the other side.

• Hemming the shirt (all options): Fold under the bottom of the bod- ice 1” and edgestitch in place.

And You’re Done! And you’re done! Thank you for purchasing my pattern. If you have any questions email me at: [email protected]

Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 26 11th Hour Gear © New Horizons Designs 2017 Glossary: • Backstitch: To stitch in reverse; usually over the beginning and end of a seam to prevent the stitches from becoming loose and fabric pulling apart.

• Baste: To sew with long loose stitches in order to hold something in place temporarily during construction and fitting.

• Bias: A line diagonal to the grain of a fabric; a line at a 45 degree angle to the selvage often uti- lized in the cutting of garments for smoother fit.

• Clipping: A technique that involves cutting slits into the seam allowance of outward curves to permit the edges of the seam to spread and lie smooth. Take great care not to cut into the seam stitching.

• Dart: A triangular shape sewn onto a flat piece of fabric, allowing the fabric to conform to the contours of the body.

• Edgestitch: Straight stitching very close to the edge of a seam, trim, or outer edge. It secures seam allowances, prevents the edge from stretching, and supports the fabric.

• Fabric Stretch Gauge: The guide printed on the back of the pattern envelope to gauge the appro- priate fabric stretch required for the garment design to fit properly.

• Fold: The edge formed by doubling the fabric when the selvage edges meet or are parallel.

• Gathering: A long running stitch that is used to pull fabric together to create a smaller surface area of fabric. Applications of the gathering stitch can be found at the waistline, cuffs, yoke, and in the construction of ruffles.

• Hem: A border of a cloth article doubled back and stitched down.

• Right Side: The outside or topside of fabric; it is usually softer or smoother.

• Seam Allowance: The amount of fabric between the stitching or seam line and the fabric edge.

• Topstitch: Machine stitches done from the right side of a garment for either a decorative effect or for functional reasons, or sometimes for both at the same time. Topstitching gives a garment a more tailored look.

• Understitching: A line of straight stitching, either by hand or machine, applied along certain seam lines such as neckline facing seams. Its purpose is to keep the facing and seam allowances laying flat in a particular direction.

• Wrong side: Usually the inside of a garment or the backside of fabric. Size Chart Glossary Printing Joggers Cutting Guide Pants Shorts Shirt Main Pg. 27 11th Hour Gear © New Horizons Designs 2017

2” 4cm 16

14 28 12 2017 Designs Horizons New by Pants Gear ©11th Hour 11th Hour Gear Pants Pocket B

Cut 2 (Mirror Image) Line Grain 3/8” Seam Allowance

3-6m 6-12m

12-18m 2918-24m 2T 3T

4T 2017 Designs Horizons New by Pants Gear ©11th Hour 5T 6 7 Tape To Pants Front Faux Fly Pants 11th Hour Gear

3/8” Seam Allowance3/8”

(Optional)

12-18m 18-24m

16

6-12m

14

12 10

3-6m

8

7 6 2T

5T 4T 3T

3-6m 6-12m 12-18m 18-24m 2T 3T 4T 5T 6 7 8 10 12 14 16

Pocket Cut Line 11th Hour Gear Pants 30 Front Cut 2 (Mirror Image) 3/8” Seam Allowance 2017 Designs Horizons New by Pants Gear ©11th Hour

12

10 8

317

2017 Designs Horizons New by Pants Gear ©11th Hour 6 5T 6 7 8

10

12

14

16

16

14

12 3-6m Shorts Cut Line 10

8

7

6 6-12m Shorts Cut Line 5T

4T

3T 2T 18-24m 12-18m 6-12m 12-18m Shorts Cut Line 3-6m

32Line Grain 18-24m Shorts Cut Line

2T Shorts Cut Line 2017 Designs Horizons New by Pants Gear ©11th Hour

3T Shorts Cut Line 3/8” 3/8” Allowance Seam 11th Hour Gear Pants Waistband Back 1 on Fold Cut 3-6m Shorts Cut Line

6-12m Shorts Cut Line Grain Line Grain 12-18m Shorts Cut Line 33 18-24m Shorts Cut Line

2T Shorts Cut Line 2017 Designs Horizons New by Pants Gear ©11th Hour

3T Shorts Cut Line

6

5T 4T

343T 2T

2017 Designs Horizons New by Pants Gear ©11th Hour 16 Shorts Cut Line Cut Shorts 16 3T Shorts Cut Line

4T Shorts Cut Line

3/8” 3/8” Allowance Seam 11th Hour Gear Pants Waistband Back 1 on Fold Cut Place on Fold on Place

5T Shorts Cut Line

6 Shorts Cut Line

7 Shorts Cut Line 11th Hour Gear 8 Shorts Cut Line Pants Pocket A 10 Shorts Cut Line

Cut 2 (Mirror Image) Line Grain 353/8” Seam Allowance 12 Shorts Cut Line 2017 Designs Horizons New by Pants Gear ©11th Hour 14 Shorts Cut Line 3-6m

6-12m 3T Shorts Cut Line

4T Shorts Cut Line

3-6m 5T Shorts Cut Line

6 Shorts Cut Line

7 Shorts Cut Line

8 Shorts Cut Line 6-12m

10 Shorts Cut Line

3612-18m 12 Shorts Cut Line 2017 Designs Horizons New by Pants Gear ©11th Hour 14 Shorts Cut Line 18-24m

16 Shorts Cut Line Cut Shorts 16

14 Shorts Cut Line Cut Shorts 14

18-24m

12 Shorts Cut Line Cut Shorts 12

12-18m

10 Shorts Cut Line Cut Shorts 10

6-12m

8 Shorts Cut Line Cut Shorts 8

7 Shorts Cut Line Cut Shorts 7

6 Shorts Cut Line Cut Shorts 6

5T Shorts Cut Line Cut Shorts 5T

373-6m 4T Shorts Cut Line Cut Shorts 4T

2017 Designs Horizons New by Pants Gear ©11th Hour 3T Shorts Cut Line Cut Shorts 3T 14 Shorts Cut Line 3-6m

6-12m

12-18m 16 Shorts Cut Line

18-24m

2T 3T

4T

5T 6 7 8

10

12

14 3816 2017 Designs Horizons New by Pants Gear ©11th Hour 14 Shorts Cut Line 18-24m

16 Shorts Cut Line

2T

3T

4T

395T 2017 Designs Horizons New by Pants Gear ©11th Hour

6

3T Shorts Cut Line Cut Shorts 3T

2T Shorts Cut Line Cut Shorts 2T

18-24m Shorts Cut Line Cut Shorts 18-24m

12-18m Shorts Cut Line Cut Shorts 12-18m 6-12m Shorts Cut Line Cut Shorts 6-12m

GrainLine 40 Line Cut Shorts 3-6m

2017 Designs Horizons New by Pants Gear ©11th Hour 3/8” Seam Allowance Seam 3/8” ©11th Hour Gear Pants by New Horizons Designs 2017 41 6

7

428 10 2017 Designs Horizons New by Pants Gear ©11th Hour

3/8” Seam Allowance Seam 3/8”

Cut 2 (Mirror Image) (Mirror 2 Cut

Back

Pants 11th Hour Gear Hour 11th

6-12m 2T 12-18m

18-24m

14

16

7 3T

6

12 8

10 4T 435T 3-6m 2017 Designs Horizons New by Pants Gear ©11th Hour 11th Hour Gear Pants

12-18m 18-24m

6-12m

3-6m

3T

10 12 14 16

2T 4T 5T Front Waistband 6 7 8 Cut 1 on Fold

3/8” Seam Allowance Grain Line Grain Place on Fold Place Eyelet44 Marker 2017 Designs Horizons New by Pants Gear ©11th Hour 12

14

45 16 2017 Designs Horizons New by Pants Gear ©11th Hour

16 14

2” 12

10

8

7

6

5T

4T

3T

4cm 2T

18-24m

12-18m 6-12m 463-6m

2017 Designs Horizons New by Joggers Gear © 11th Hour 3/8” 3/8” Allowance Seam 11th Hour Gear Joggers Back Image) 2 (Mirror Cut

47

18-24m

3-6m 12-18m 6-12m 2017 Designs Horizons New by Joggers Gear © 11th Hour

7

6

5T

4T 3T

2T 48 18-24m 2017 Designs Horizons New by Joggers Gear © 11th Hour

16

14

12 10 8 49 2017 Designs Horizons New by Joggers Gear © 11th Hour

Grain Line Grain 3/8” 3/8” Allowance Seam 11th Hour Gear Joggers Back Image) 2 (Mirror Cut

11th Hour Gear Joggers Pocket A

50Cut 2 (Mirror Image) Line Grain 3/8” Seam Allowance 2017 Designs Horizons New by Joggers Gear © 11th Hour

3-6m

6-12m Grain Line Grain

16

14

12 51 10 2017 Designs Horizons New by Joggers Gear © 11th Hour Grain Line

12 10 52

8

7

6

5T Cut 2 (Mirror Image) Pocket B Joggers 11th Hour Gear

3/8” Seam Allowance3/8”

4T

3T

2T

18-24m 2017 Designs Horizons New by Joggers Gear © 11th Hour

12-18m

6-12m

3-6m

11th Hour Gear Joggers Cuffs

Cut 2 © 11thHour Gear Joggers by New Horizons Designs 2017 3/8” Seam Allowance

53 Stretch Grain Line Grain 3-6m

6-12m

12-18m

18-24m

2T 3T

4T

5T 6 7 8

10

12

14 5416 2017 Designs Horizons New by Joggers Gear © 11th Hour

Grain Line Grain

6 7 8

2T 3T 4T 5T 10 12 14 16

3-6m

6-12m

18-24m

12-18m 3/8” 3/8” Allowance Seam 11th Hour Gear 55Joggers Knee Patches 2 Cut 2017 Designs Horizons New by Joggers Gear © 11th Hour Grain Line Cut 2 (Mirror Image) Pocket B Joggers 11th Hour Gear

3/8” Seam Allowance3/8”

18-24m

12-18m

6-12m

3-6m

Grain Line 56 2017 Designs Horizons New by Joggers Gear © 11th Hour Placement Knee Pad Placement Knee Pad Placement Knee Pad

Grain Line

Cut 2 2 Cut

Cuffs

Joggers 11th Hour Gear Hour 11th

12-18m 18-24m

6-12m

3-6m

2T 3T 4T 5T 10 12 14 16

6 7 8

11th Hour Gear

12-18m 18-24m

6-12m

3-6m

Joggers 3T

10 12 14 16

2T 4T 5T Back Waistband 6 7 8 Cut 1 on Fold

3/8” Seam Allowance Grain Line Grain 57 on Fold Place Cut 2 (Mirror Image) Front Joggers 11th Hour Gear

3/8” SeamAllowance 3/8” 2017 Designs Horizons New by Joggers Gear © 11th Hour 7

8

10

12

14 16 58 2017 Designs Horizons New by Joggers Gear © 11th Hour Placement Knee Pad Placement Knee Pad Placement Knee Pad Placement Knee Pad Placement Knee Pad Placement Knee Pad

12-18m

18-24m

2T

3T

4T

5T

6 7 59 2017 Designs Horizons New by Joggers Gear © 11th Hour Placement Knee Pad Placement Knee Pad Placement Knee Pad Placement Knee Pad Placement Knee Pad Placement Knee Pad Placement Knee Pad Placement Knee Pad Placement Knee Pad Placement Knee Pad

12-18m 6-12m 3-6m 2T Pocket Cut Line Cut Pocket 2T 60 Line Cut Pocket 5T 2017 Designs Horizons New by Joggers Gear © 11th Hour Cut 2 (Mirror Image) Front Joggers 11th Hour Gear

3/8” SeamAllowance 3/8”

Place on Fold

Eyelet Marker

3/8” Seam Allowance3/8” Cut 1 on Fold Front Waistband Joggers 11th Hour Gear

Grain Line Line Cut Pocket 18-24m

12-18m Pocket Cut Line Cut Pocket 12-18m

6-12m Pocket Cut Line Cut Pocket 6-12m

4T Pocket Cut Line Cut Pocket 4T 3-6m Pocket Cut Line Cut Pocket 3-6m

3-6m

6-12m 3T Pocket Cut Line Cut Pocket 3T

12-18m

2T Pocket Cut Line Cut Pocket 2T Grain Line 18-24m

2T 3-6m

6-12m

5T Pocket Cut Line Cut Pocket 5T 6 Pocket Cut Line Cut Pocket 6 3T

12-18m

7 Pocket Cut Line Cut Pocket 7 4T

8 Pocket Cut Line Cut Pocket 8

18-24m

10 Pocket Cut Line Cut Pocket 10

5T 2T

12 Pocket Cut Line Cut Pocket 12

3T 14 Pocket Cut Line Cut Pocket 14

16 Pocket Cut Line Cut Pocket 16

6 4T

7 5T

6

8 7

10 8

12

61 10

14 12 16 14

2017 Designs Horizons New by Joggers Gear © 11th Hour 16 2” 624cm

2017 Designs Horizons New by T-Shirt Gear © 11th Hour 11th Hour Gear T-Shirt Back Cut 1 on Fold

Grain Line

3-6m

6-12m

12-18m

18-24m

2T

3T

4T

5T

6 7

638

10 12

2017 Designs Horizons New by T-Shirt Gear © 11th Hour

14 16

© 11thHour Gear T-Shirt by New Horizons Designs 2017 11th Hour Gear64 T-Shirt Pocket A Cut 1 (Fabric Right Side UP) 3/8” Seam Allowance © 11th Hour Gear T-Shirt by New Horizons Designs 2017 65

11th Hour Gear T-Shirt Pocket B Cut 1 (Fabric Right Side UP)

3/8” Seam Allowance Grain Line Grain 11th Hour Gear T-Shirt Back Cut 1 on Fold 3/8” Seam Allowance

1” Hem PlaceFold on

66 Grain Line Grain 2017 Designs Horizons New by T-Shirt Gear © 11th Hour

14 16 67 2017 Designs Horizons New by T-Shirt Gear © 11th Hour © 11th Hour Gear T-Shirt by New Horizons Designs 2017 68

3-6m

6-12m

12-18m

18-24m

2T

3T

4T

5T

696 7

2017 Designs Horizons New by T-Shirt Gear © 11th Hour 8 3-6m

6-12m

12-18m

18-24m

2T 703T 4T

5T 2017 Designs Horizons New by T-Shirt Gear © 11th Hour

6 11th Hour Gear T-Shirt Front Cut 1 on Fold Place on Fold Place 3/8” Seam Allowance 1” Hem

3-6m Pocket Cut Out Grain Line Grain 6-12m Pocket Cut Out

12-18m Pocket Cut Out

18-24m Pocket Cut Out

2T Pocket Cut Out 713T Pocket Cut Out 4T Pocket Cut Out

5T Pocket Cut Out

2017 Designs Horizons New by T-Shirt Gear © 11th Hour 6 Pocket Cut Out

7 Pocket Cut Out 3-6m 8 Pocket Cut Out

12

10

8

7

6

5T

4T

72 3T 2T

2017 Designs Horizons New by T-Shirt Gear © 11th Hour 18-24m

8

10

16

12

14

12

14

10

16

8

7 6 5T 73 2017 Designs Horizons New by T-Shirt Gear © 11th Hour 6

7

8

10

12 74

14 2017 Designs Horizons New by T-Shirt Gear © 11th Hour 6 Pocket Cut Out

7 Pocket Cut Out 3-6m 8 Pocket Cut Out

10 Pocket Cut Out

6-12m 12 Pocket Cut Out

12-18m 14 Pocket Cut Out

18-24m 16 Pocket Cut Out

2T

3T 754T 5T

6 2017 Designs Horizons New by T-Shirt Gear © 11th Hour

7

18-24m

12-18m

6-12m 3-6m

Grain Line

3/4” Hem 3/4” Short Sleeve Cut Line Cut Sleeve Short

76Allowance Seam 3/8”

Cut 2 2 Cut (Mirror Image) (Mirror

Sleeve

2017 Designs Horizons New by T-Shirt Gear © 11th Hour T-Shirt 11th Hour Gear Hour 11th 3-6m

6-12m

12-18m Front Back Cut 2 Long Sleeve Cuffs T-Shirt 11th Hour Gear

3/8” Seam Allowance3/8”

Grain Line

3-6m 6-12m 12-18m 18-24m 77 2T 3T 4T 5T 6 7 8 10 12 14 16 2017 Designs Horizons New by T-Shirt Gear © 11th Hour

12-18m 16

11th Hour Gear T-Shirt Neck Band

Place on Fold Place Cut 1 on Fold

Grain Line Grain

6-12m 12-18m 18-24m 2T 3T 4T 5T 6 7 8 10 12 14 16 3/8” Seam 78Allowance 3-6m 2017 Designs Horizons New by T-Shirt Gear © 11th Hour 7

8

10

12

79 14

16 2017 Designs Horizons New by T-Shirt Gear © 11th Hour

Cut 2 2 Cut

(Mirror Image) (Mirror

Sleeve

T-Shirt 11th Hour Gear Hour 11th 3-6m

6-12m

12-18m Front Back

18-24m

2T

3T 80 2017 Designs Horizons New by T-Shirt Gear © 11th Hour 12-18m

18-24m

2T

3T

4T

5T

6

7

8

10

12

14

16

11th Hour Gear T-Shirt Arm Bands 81(Muscle Tee Only)

Place on Fold Place

Cut 2 on Fold Line Grain

7

6-12m 12-18m 18-24m 2T 3T 4T 5T 6 8 10 12 14 16 3/8” Seam Allowance 3-6m 2017 Designs Horizons New by T-Shirt Gear © 11th Hour