Punches
Automatic Center Punches with Adjustable Stroke ools T
Automatically locates and p Rugged automatic center punch Easy one-hand precision centers holes through hinges,
with adjustable stroke center punching latches, catches, etc. ho S
recision P
18 818 819 Hinge-Locating Rugged automatic punches with all-steel This punch is similar to our 18C, except that This automatic centering punch combines all handles and parts it has a lightweight, knurled aluminum handle the features of our 818 lightweight aluminum for a positive grip and easy handling punch with an exclusive self-centering • Internal mechanism automatically locating sleeve that automatically centers strikes a blow when downward pressure • No hammer required! Just hold the starter holes for screws is applied punch in an upright position, press the • Adjustable knurled cap regulates the handle down, and a built-in mechanism • Simply engage the beveled edge of the force of the blow strikes a perfect center mark every time. sleeve with the countersunk hole in the hinge and press down on the handle • Spring tension, which regulates the blow, • The force of the blow can be adjusted by turning the knurled cap until the built-in mechanism strikes is constant so marks made by the point a blow for truly concentric starting are uniform in depth and size for each • All working parts made of properly holes every time. To draw hinges, etc., setting hardened tool steel. Hardened tool sideways, tilt the punch slightly in the • All sizes are identical in style, differing steel point may easily be removed opposite direction. only in the striking power for resharpening or replacement. (Replacement PT22256) • Eliminates the risk of drilling off center, • The point can be easily removed for causing screws to pull hinges or regrinding or replacement • Works on metal, plastics, wood and hardware off center other machinable materials • Heavy-duty 18C is capable of striking a • Punch can be adjusted for striking light much heavier blow than the other sizes or heavy impressions by turning the knurled cap Automatic Center Punches with Adjustable Stroke • Point is easily removed for replacement Length Diameter (Replacement PT09966) Description Inch mm Inch mm Cat./ Part No. EDP 818 Automatic Center Punch 4" 100mm 7/16" 11mm 18AA 50119 Punch Length Diameter 5" 125mm 9/16" 14mm 18A 50120 Punch, Heavy-Duty 5-1/4" 130mm 11/16" 17mm 18C 56757 Inch mm Inch mm Cat. No. EDP Point Only for 18AA PT06689 12901 5" 125mm 5/8" 16mm 818 53048 Point Only for 18A PT06690 12902 819 Hinge-Locating Automatic Center Punch Point Only for 18C PT22256 72445 5" 125mm 5/8" 16mm 819 53049 Special points for stamping numbers, letters, special symbols, etc. can be furnished. Contact the Special Order Department.
Check out our website for interactive features at starrett.com 351