DOCSLIB.ORG

With Urrea Striking and Struck Tools I Always Get Stronger and Indestructible

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
With Urrea Striking and Struck Tools I Always Get Stronger and Indestructible WITH URREA STRIKING AND STRUCK TOOLS I ALWAYS GET STRONGER AND INDESTRUCTIBLE. STRIKING AND STRUCK TOOLS. At Urrea I always find what I'm looking for With the striking and struck tools I have what I need for each type of use: Direct striking tools (hammers and mallets) and indirect striking tools (chisels, punches and drift pins). Together they are very useful in industrial applications (machinery, assembly lines, maintenance) and for automotive service (engines, body, tires). Struck tools include those used for cutting or breaking materials, in addition to the traditional hammer of mechanic or ball, hammers designed especially so as not to deform, mark or damage the parts subjected to blows. The materials used in these types of hammers are the bronze, aluminum bronze, plastic or rubber. There are also hammers designed specifically for the service of automotive laminate whose geometries allow coupling with the shapes of the bodies of cars. Among the tools that transmit blows are those designed to cut or break materials, which are used to mark, those used to assist in the centering of bits and those used to install or remove bolts and rivets, in the latter are made of steel and bronze when the materials are not required to be marked or damaged. This section also presents the punching tools, useful tools for drilling or making rubber washers or any material used for packaging, and bars for alignment whose design facilitates the alignment or disassembly of machinery elements. They meet national and international, American and European standards. The quality image of these products is reinforced by the indelible and permanent mark showing the country of origin. This mark meets standards set by the Federal Trade Commission in the United States. urreaprofessionaltools.com 09 9 STRIKING AND STRUCK TOOLS SLEDGE HAMMERS NEW SHOCK SHOCK • Steel mounting plate avoids the • Head secured with epoxy. possibility if the head becomes • Anti-vibration handle reduces loose or or comes off. fatigue and protects user from injure due beat vibration. • Steel rods attached to the head to avoid breakage. Innovation Innovation Urrea Urrea 1437HD 1434A Indestructible sledge hammers Anti-vibration sledge hammers Meets: ANSI B07.54 GGG-H-86C BS 876. Meets: ANSI B07.54 GGG-H-86C standard. • Rubber grip handle absorbs vibration and never breaks. • Aluminium alloy handle, coated with nylon and rubber grip. MATERIAL ITEM DESCRIPTION HEAD WEIGTH FACE DIAMETER HEAD LENGTH HANDLE LENGTH LIST PRICE HEAD HANDLE 1435HD Octagonal indestructible Steel Rubber grip 4 lbs 2” 4-1/2” 16” 1 $148.75 1437HD Octagonal indestructible Steel Rubber grip 8 lbs 2-6/16” 6-1/4” 30” 1 $244.31 1439HD Octagonal indestructible Steel Rubber grip 12 lbs 2-11/16” 7-9/16” 30” 1 $292.95 HAMMERS 1441HD Octagonal indestructible Steel Rubber grip 14 lb 2-15/16” 7-3/4” 30" 1 $399.64 1442HD Octagonal indestructible Steel Rubber grip 20 lb 3-3/16” 8-13/16” 36" 1 $498.05 1433A Antivibration square Steel Aluminium alloy 2 lbs n/a 3-23/32” 10-1/4” 1 $64.70 1434A Antivibration square Steel Aluminium alloy 3 lbs n/a 4-19/64” 10-1/4” 1 $79.99 1435A Antivibration square Steel Aluminium alloy 4 lbs n/a 4-11/16” 11” 1 $93.67 ERICA MILLED MILLED AM N FACES FACES HICKORY 1434GFV 1438GFV 1434G 1434EG 1438G Octagonal sledge hammer with Octagonal sledge hammer with Steel octogonal sledge hammer Steel octogonal sledge hammer Steel octogonal sledge hammer 15-1/4” fiberglass handle 36” fiberglass handle with 12” american hickory handle with 16” american hickory handle with 36” american hickory handle • New handle design, with shock absorbent guard included. • New shock absorbent guard brings overstrike protection. • Exceed ASME B107.400 standard. MATERIAL ITEM DESCRIPTION HEAD WEIGTH FACE DIAMETER HEAD LENGTH HANDLE LENGTH SPARE PART LIST PRICE HEAD HANDLE 1433GFV Machined octagonal head Steel Fiberglass handle 2 lbs 1-5/8” 4-1/2” 15-1/4” 1 $26.99 1434GFV Machined octagonal head Steel Fiberglass handle 3 lbs 1-3/4” 5-1/8” 15-1/4” 1 $29.50 1435GFV Machined octagonal head Steel Fiberglass handle 4 lbs 2-1/16” 5-5/8” 15-1/4” 1 $37.49 1436GFV Machined octagonal head Steel Fiberglass handle 6 lbs 2-3/16” 6” 36” 1 $63.24 1437GFV Machined octagonal head Steel Fiberglass handle 8 lbs 2-3/8” 6-1/2” 36” 1 $71.51 1438GFV Machined octagonal head Steel Fiberglass handle 10 lbs 2-1/2” 6-7/8” 36” 1 $76.19 1439GFV Machined octagonal head Steel Fiberglass handle 12 lbs 2-11/16” 7-11/16” 36” 1 $84.93 1440GFV Machined octagonal head Steel Fiberglass handle 16 lbs 2-15/16” 8-7/16” 36” 1 $100.57 1433G Machined octagonal head Steel Hickory 2 lbs 1-5/8” 4-1/2” 12” CAB7UH 1 $23.07 1434G Machined octagonal head Steel Hickory 3 lbs 1-3/4” 5-1/8” 12” CAB7UH 1 $25.22 1435G Machined octagonal head Steel Hickory 4 lbs 2-1/16” 5-5/8” 12” CAB7UH 1 $32.60 1433EG Machined octagonal head Steel Hickory 2 lbs 1-5/8” 4-1/2” 16” 1 $27.68 1434EG Machined octagonal head Steel Hickory 3 lbs 1-3/4” 5-1/8” 16” 1 $30.26 1435EG Machined octagonal head Steel Hickory 4 lbs 2-1/16” 5-5/8” 16” 1 $38.95 1436G Machined octagonal head Steel Hickory 6 lbs 2-3/16” 6” 36” CAB10UH 1 $54.27 1437G Machined octagonal head Steel Hickory 8 lbs 2-3/8” 6-1/2” 36” CAB10UH 1 $61.36 1438G Machined octagonal head Steel Hickory 10 lbs 2-1/2” 6-7/8” 36” CAB10UH 1 $65.38 1439G Machined octagonal head Steel Hickory 12 lbs 2-11/16” 7-11/16” 36” CAB10UH 1 $72.88 1440G Machined octagonal head Steel Hickory 16 lbs 2-15/16” 8-7/16” 36” CAB10UH 1 $86.30 190 urreaprofessionaltools.com STRIKING AND STRUCK TOOLS STRIKING AND STRUCK TOOLS 9 SHOCK Bronze head does Bronze head does not not deform stricken deform stricken materials. materials. 1430FV 1430 Bronze hammer with fiberglass handle Bronze hammer with wooden handle • New handle design, with shock absorbent guard included. • Made with a malleable bronze alloy that does not fracture or generate splinters. • Bronze head that avoids material distortion. • Ideal for maintenance work, die cutting and molding. • They do not mark, damage or deteriorate the objects. • They do not produce sparkles. • Exceed ASME B107.400. standard. MATERIAL ITEM DESCRIPTION HEAD WEIGTH FACE DIAMETER HEAD LENGTH HANDLE LENGTH LIST PRICE HEAD HANDLE 1430FV Bronze hammer Bronze Fiberglass handle 1.6 lbs 1-3/8” 3-7/16” 13” 1 $63.10 1432FV Bronze hammer Bronze Fiberglass handle 3.1 lbs 2” 3-3/4” 15” 1 $107.49 1430 Bronze hammer Bronze Wood 1.6 lbs 1-3/8” 3-7/16” 14” 1 $50.43 1432 Bronze hammer Bronze Wood 3.1 lbs 2” 3-3/4” 18” 1 $89.58 HAMMERS 1435DB Dead blow impact sledge hammers • The high-impact dead blow hammer, in addition to featuring a head filled with steel shot that makes it weigh more, also has a greater contact area, very useful in the assembly of machinery parts requiring great force. • Non-slip handle. • Heads are partially filled with steel shot. MATERIAL ITEM DESCRIPTION HEAD WEIGTH FACE DIAMETER HEAD LENGTH HANDLE LENGTH LIST PRICE HEAD HANDLE 1435DB One-piece dry hit Steel Anti-slip 3.6 lbs 2-9/16” 5-7/16” 15-1/8” 1 $78.91 1436DB One-piece dry hit Steel Anti-slip 6 lbs 2-3/4” 7-3/32” 20” 1 $158.48 1439DB One-piece dry hit Steel Anti-slip 12 lbs 3-1/8” 8” 36-1/2” 1 $323.98 ERICA AM N HICKORY 30 PIECES ITEM QUANTITY RMARRU 1 1436G 4 1437G 4 1438G 4 1439G 4 1440G 4 1436GFV 2 1437GFV 2 1438GFV 2 1439GFV 2 1440GFV 2 CAB7UH Spare handles for american hickory sledge hammers • Hickory wood handles are very hard, stiff, and shock resistant. • Includes wood and metal wedges Contents page 410 ITEM LENGTH LIST PRICE CAB7UH 12” 1 $11.41 ITEM DESCRIPTION LIST PRICE CAB10UH 36” 1 $25.05 RMARRUC Sledge rack with hammer fiberglass and american hickory handles 1 $2,345.85 191 9 STRIKING AND STRUCK TOOLS RUBBER MALLETS • Mallets with rubber heads are ideal for mechanics, bodyworkers, brass • Oak handle provides excellent impact resistance. • Oak handle provides excellent impact resistance. workers and carpenters. Very useful for striking large pieces requiring • Its beige color ensures non-marring. • Its gray color ensures non-marring special care. • Head made of neoprene rubber that delivers strong blows without damaging the stricken object. • Oak handle provides excellent impact resistance. 1366 1368B 1368G With black color rubber head With beige color rubber head With grey color rubber head • Deformation occurs on the face, not on the hit object. • Indestructable fiber glass handle. • Body composed of a steel body with two fixed faces • Works by moving the steel shot and partially filling • Reinforced faces made of cellulose acetate, designed for use on metals the head, when shot falls for rebound and controls and other materials susptible to strike marks or hammer. deformations. HAMMERS SF150 1430DBX 1430DB 1434PDB 16 oz. dead blow hammer (does Fixed face dead blow hammer Heavy-duty high-impact hammer High-impact hammer not include interchangeable faces) MATERIAL ITEM DESCRIPTION FACES HEAD WEIGTH FACE DIAMETER HEAD LENGTH HANDLE LENGTH LIST PRICE HEAD HANDLE 1366 Black rubber - Rubber Wood 8 oz 1-25/32” 3-1/16” 12-3/8” 1 $11.94 1367 Black rubber - Rubber Wood 16 oz 2-3/16” 3-3/4” 14” 1 $13.26 1368 Black rubber - Rubber Wood 22 oz 2-5/8” 4-1/2” 16” 1 $20.17 1368B Beige rubber - Rubber Wood 22 oz 2-5/8” 4-1/2” 16” 1 $20.17 1368G Gray rubber - Rubber Wood 22 oz 2-5/8” 4-1/2” 16” 1 $20.17 SF150 Interchangeable caps Interchangeable Fiberglass 16 oz 1-1/2” 4” 11-1/2” 1 $39.60 1430DBX Dry hit Fixed Fiberglass 32 oz 2” 5” 13-3/4” 1 $88.20 1430DB Dry hit Fixed Fiberglass 32 oz 2” 4-3/8” 13-3/4” 1 $68.75 1432DB Dry hit Fixed Fiberglass 48 oz 2-3/4” 4-3/4” 14-11/16” 1 $93.64 1434PDB High impact Fixed Fiberglass 16 oz 1-51/64” 5-1/8” 12-1/4” 1 $37.54 1435PDB High impact Fixed Fiberglass 24 oz 1-51/64” 5-1/8” 12-1/4” 1 $40.39 9 PIECES Content faces types: Super soft (gray) Soft (brown) Medium (red) Rugged use (green) Medium rough (beige) Hard (black) Extra hard (yellow) Interchangeable faces for 1-1/2” dead blow hammers Steel ITEM STRIKE FORCE COLOR HARDNESS LIST PRICE SF15SS SUPER SOFT Shore a instantaneous 45-58 2 $11.66 SF15ST SOFT Shore A 30 sec.
Load more

Recommended publications
  • Water Hammer Arrestors Materials Water Hammer Arrestor Should Be Selected
    Sizing and Placement Rule 1 covers multiple fixture branch lines which do not exceed 20 feet length. Series 15M2 Explanation - Fixture unit sizing and selection table is used to Water Hammer Arrestor select the required PDI unit (water hammer arrestor). For Commercial/Residential Systems Riser Up to 20' Rule 1 Typical Branch Line Rule 2 covers multiple fixture branch lines which exceed 20 feet As shown above, it has been established that the preferred location in length. for the water hammer arrestor is at the end of the branch line between Explanation - Fixture unit sizing and selection table is used to the last two fixtures served. select the required PDI unit (water hammer arrestor). The sum of The location of the water hammer arrestor shown above applies to the fixture unit rating of units X and Y shall be equal to or greater branch lines that do not exceed 20 feet in length, from the start of the than the demand of the branches. horizontal branch line to the last fixture supply on this branch line. When the branch line exceeds the 20 foot length, an additional water Over 20' hammer arrestor should be used. This practice is best defined by two Rule 2 Features rules which have been established to cover the placement of water • NPT solid hex brass adapter or solder end connection hammer arrestors. for easy installation 15M2 • Approved for installation with no access panel required 15M2S • May be installed in new or existing plumbing systems with a standard pipe tee vertically, horizontally or at any angle • PDI Listed (PDI WH201) • Maintenance free – unit piston is the only moving part Selection for Long Piping Runs Sizing Table • Air pre-load is 60 psi (4.2 bar) Pre-charged The majority of sizing and selection applications will involve single and For Water Pressures up to 65psi Air Chamber multiple fixture branch lines.
    [Show full text]
  • Paul Sellers' Workbench Measurements and Cutting
    PAUL SELLERS’ WORKBENCH MEASUREMENTS AND CUTTING LIST PAUL SELLERS’ WORKBENCH MEASUREMENTS AND CUTTING LIST NOTE When putting together the cutting list for my workbench, I worked in imperial, the system with which I am most comfortable. I was not happy, however, to then provide direct conversions to metric because to be accurate and ensure an exact fit this would involve providing measurements in fractions of millimetres. When I do work in metric I find it more comfortable to work with rounded numbers, therefore I have created two slightly different sets of measurements. This means that in places the imperial measurement given is not a direct conversion of the metric measurement given. Therefore, I suggest you choose one or other of the systems and follow it throughout. © 2017 – Paul Sellers v2 PAUL SELLERS’ WORKBENCH MEASUREMENTS AND CUTTING LIST WOOD QTY DESCRIPTION SIZE (IMPERIAL) SIZE (METRIC) (THICK X WIDE X LONG) (THICK X WIDE X LONG) 4 Leg 2 ¾” x 3 ¾” x 34 ⅜” 70 x 95 x 875mm 1 Benchtop 2 ⅜” x 12” x 66” 65 x 300 x 1680mm 2 Apron 1 ⅝” x 11 ½” x 66” 40 x 290 x 1680mm 1 Wellboard 1” x 12 ½” x 66” 25 x 320 x 1680mm 4 Rail 1 ½” x 6” x 26” 40 x 150 x 654mm 2 Bearer 1 ¼” x 3 ¾” x 25” 30 x 95 x 630mm 4 Wedge ⅝” x 1 ½” x 9” 16 x 40 x 228mm 4 Wedge retainer ⅝” x 1 ½” x 4” 16 x 40 x 100mm HARDWARE QTY DESCRIPTION SIZE (IMPERIAL) SIZE (METRIC) 1 Vise 9” 225mm Dome head bolts (including nuts and washers) for 4 ⅜” x 5” 10 x 130mm bolting legs to aprons 2 Lag screws (with washers) for underside of vise ½” x 2 ½” 12 x 65mm 2 Lag screws for face
    [Show full text]
  • General Gunsmith Tools 421-461
    GRACE USA GENERAL GUNSMITH TOOLS GENERAL GUNSMITH TOOLS INDEX 17 PIECE TOOL SET PLUS Action Proving Dummies .......... 457 Drill Bits .................... 446-447 Rotary Tools ................. 445-446 BENCH BLOCK Action Wrenches ............. 451-452 Hammers ................... 429-430 Saws/Files ................... 438-441 Contains Tools Necessary For Quick Repairs In The Field Ammunition Tools ................ 430 Headspace Gauges ........... 456-457 Scope Mounting Tools ........ 459-460 Handy tool set contains everything Barrel Vises ................. 452-453 Inspection Tools ............. 442-443 Screw Extractors ................. 447 you need to perform quick repairs on your guns. Kit includes: (8) fixed blade screw- Basic Tool Kits ................ 421-423 Lathe Bits/End Mills ........... 450-451 Screwdrivers ................ 431-437 drivers with parallel ground tips to fit most gun screws, (8) brass punches, and an 8 Bench Blocks .................... 425 Machining Accessories ........ 449-450 Stones & Trigger Jigs ......... 443-445 ounce brass hammer. Punches are made 5 1 3 1 5 3 7 1 of /16” brass hex stock and come in /16", /32", /8", /32", /16", /32", /4", 5 Bench Mats ................. 424-425 Measuring Instruments ........ 441-442 Taps & Dies ................. 447-449 and /16" diameter. Kit comes with a neoprene base to keep tools organized, but also serves as a functional bench block. Neoprene Boresighters ................. 460-461 Picks/Hooks/Scribes ............... 441 Trigger Pull Gauges ............... 451 base can also
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • Hammer Drill
    Hammer Drill 15 mm (9/16”) MODEL HP1501 004187 DOUBLE INSULATION INSTRUCTION MANUAL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. SPECIFICATIONS Model HP1501 Concrete 15 mm (9/16”) Capacities Steel 13 mm (1/2”) Wood 25 mm (1”) No load speed (RPM) 0 - 2,800/min. Blows per minute 0 - 44,800 Overall length 299 mm (11-3/4”) Net weight 1.7 kg (3.7 lbs) • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA002-2 (For All Tools) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS Work Area 3. Keep bystanders, children, and visitors away while operating a power tool. Distrac- 1. Keep your work area clean and well lit. tions can cause you to lose control. Cluttered benches and dark areas invite acci- dents. Electrical Safety 2. Do not operate power tools in explosive 4. Double insulated tools are equipped with atmospheres, such as in the presence of a polarized plug (one blade is wider than flammable liquids, gases, or dust. Power the other.) This plug will fit in a polarized tools create sparks which may ignite the dust outlet only one way. If the plug does not fit or fumes. fully in the outlet, reverse the plug. If it still does not fit, contact a qualified elec- 2 trician to install a polarized outlet. Do not 13.
    [Show full text]
  • HAMMERS DEMOLITION HAMMER BITS CHART 1-1/8” Hex Shank Makita Large Shank Makita Small Shank D15 D14 D13 D12 D9 D7 D5 D4 D3 D2 D1 D7 D5 D4 D3 D2 D1 D10 D8 D3 D1
    HAMMERS DEMOLITION HAMMER BITS CHART 1-1/8” Hex Shank Makita Large Shank Makita Small Shank D15 D14 D13 D12 D9 D7 D5 D4 D3 D2 D1 D7 D5 D4 D3 D2 D1 D10 D8 D3 D1 Makita HM1304B HM1810 Large Makita 1-1/8” Small Hex HM1500 HK1810 SDS Plus Shank SDS Max Shank 3/4” Hex Shank D10 D8 D3 D2 D1 HK1820 D9 D7 D6 D5 D4 D3 D2 D1 D16 D11 D9 D7 D6 D5 D4 D3 D2 D1 SDS max HK1820L 3/4” Hex 21/32” SDS Round Shank Plus HM0860C HM1100C HM1202C HK0500 HM1211B ROTARY HAMMER BITS CHART SDS PLUS SHANK HR3210C R1 HR3210FCT R8 IS ADAPTER WHICH ALLOWS OLDER TOOLS TO USE DEMOLITION BITS R6 HR2811F Metal R3 R2 HR3000C Wood R4 SDS Plus HR2432 D1 R23c R23b R23 R23a HR2455 R9 R8 R10 HR2470F / FT HR160DWA & HR2400 only SDS MAX SHANK D4 R1a HR5210C D5 HR5211C D1 D11 D6 HR4010C SDS HR4011C D2 HR4510C D16 D15 max HR4511C SDS Max D18 D9 D3 HR4002 R24c R24b R24 R24a HR4500C SPLINE SHANK & 3/4” HEX SHANK 21/32” Round Shank D4 D2 3/4” HEX Shank 21/32” Round Shank D5 D3 HR3851 D8 D6 R6 D7 HR4040C R1b D1 D18 D17 R24a R24c R24b R24 D16 HR5000 Taper Shank R5 Spline Shank 67 HAMMERS DEMOLITION HAMMER BITS CHART Demolition Hammer Bits Chart HM1202C, HM1100C, HR3210C/FCT, HM0860C, HR5210C, HR3000C, HR2811F, HR5211C, HR4510C, HM1810C, HM1304B HM1500 HK1810 HR2455, HR2432, Model HR4511C, HR4500C, HR2470F/FT, HK1820, HR4010C, HR4011C, HK0500 HR4002 Ref. No. Description 1-1/8" Hex 3/4" Hex Makita Large Makita Small SDS Plus 3/4" Hex, 21/32" Round SDS Max Hex Shank Size Part No.
    [Show full text]
  • The Leading Manufacturer of Forged Hand and Power Tools Accessories Since 1946
    122806_A_AJAX_ATW-lisa 7/17/12 8:20 PM Page 1 The Leading Manufacturer of Forged Hand and Power Tools Accessories Since 1946 TM Phone: 800.323.9129 • Fax: 800.424.2529 122806_A_AJAX_r3.qxp_AJAX 7/25/12 11:59 AM Page 3 Phone: 800.323.9129 • Fax: 800.424.2529 www.ajaxtools.com ZIP GUN CHISELS & ACCESSORIES WELD FLUX CHISELS & ACCESSORIES CHIPPING HAMMER TOOLS & ACCESSORIES BERYLLIUM COPPER SAFETY TOOLS RIVET BUSTER TOOLS & ACCESSORIES PAVING BREAKER TOOLS DRILL STEEL TOOLS ELECTRIC HAMMER TOOLS RIGGER TOOLS HAND TOOLS WEDGES, LINE UP PINS & SCRAPERS DEMOLITION TOOLS TM Wear Safety Goggles 4 122806_A_AJAX_ATW-lisa 7/17/12 8:20 PM Page 5 23⁄8" 3 .495" 111⁄16" .495" 2 ⁄8" 60mm 51⁄64" 15⁄16" 60mm 13⁄4" 17 ⁄32" .485" 44.4mm .580" 15⁄32" .469" 14.7mm .576" .680" .680" .576" 17.2mm 17.2mm .812" .812" 3 3 20.6mm 2 ⁄8" 3⁄8" 13 9 20.6mm 23⁄8" ⁄8" 60.3mm ⁄16" ⁄16" .495" 19⁄32" 29⁄32" 9.5mm 9.5mm 60.3mm 3 4 1⁄2" sq. 1⁄4" 1⁄4" 1 ⁄ " .360" Ø .415" 44.4mm .580" .425" 1 14.7mm Ø .373" .576" 1 ⁄8" .680" 13⁄16" 11⁄8" 13⁄16" 28.5mm 17.2mm 20.6mm 28.5mm 20.6mm 21⁄2" 1 4 21⁄2" 11⁄4" 1 5 1 ⁄ " 3⁄8" 63.5mm 3 1 ⁄4" REF 1 ⁄64" 32mm 63.5mm 32mm ⁄8" .620" 9.5mm 13⁄4" 9.5mm .354" .919" 1" 3⁄8" .375" .610" 44.4mm 13 13 .576" .680"
    [Show full text]
  • How to Use Tools / Mistakes to Avoid CARLTSOE SAFETY TOOLS
    CARLTSOE SAFETY TOOLS If you just had the right tools How to Use Tools / Mistakes to Avoid Tool Proper Uses Abuse/Misuse Nail Hammers Nail hammers are intended for driving and pulling common, Never strike one hanmmer with or against another hammer unhardened nails only, and for ripping apart wooden or a hatchet. Never strike nail pullers, steel chisels or structures. They may be used to strike nail sets with the other hardened objects with a nail hammer as the face may center of the striking face. chip, possibly resulting in eye or other serious injury. Ball Pein Hammers Ball pein hammers of the proper size are designed for striking chisels and punches, and for riveting, shaping and Strike squarely and avoid glancing blows that may cause straightening unhardened metal. the edge of the face to chip, possibly resulting in eye or When striking a struck tool (chisel or punch), the striking face other serious injury. Never strike with or against the side, of the hammer should have a diameter at least 3/8" larger or cheek, of any hammer. than the struck face of the tool. Riveting and Setting Hammers The Riveting hammer is designed for driving and spreading Never use these special-purpose hammers for general- rivets on sheet metal work. The Setting hammer is designed purpose work. The square, sharp edges of the setting for forming sharp corners, closing and peining seams and lock hammer make it vulnerable to chipping if improperly used. edges, and for use by glaziers for inserting glazier points. Never strike against other steel tools.
    [Show full text]
  • User Manual Bandsaw N4400
    User Manual (Translation) Bandsaw N4400 Keep this manual handy and in good condition for continual reference! Dok.ID: 503-15-4502 • Englisch • 2010-10-01 Bandsaw N4400 Attention: Upon arrival, the machine must be inspected immediately. If the machine was damaged during transport or if parts are missing, a written record of the problems must be submitted to the forwarding agent and a damage report must be drawn up. Be sure to also notify your supplier straight away. For the safety of all personnel, it is necessary to conscientiously study this manual before assembling and putting the machine into operation. This manual must be kept in good condition, as it is considered to be a part of the machine. Furthermore, keep the manual handy in the vicinity of the machine so that it is acces- sible to personnel when they are using, maintaining or repairing the machine. HAMMER A product of the FELDER GROUP © Felder KG KR-FELDER-STR 1 A-6060 Hall in Tirol Tel.: +43 (0) 5223 45 0 90 Fax.: +43 (0) 5223 45 0 99 E-Mail: [email protected] Internet: www.hammer.at 2 Bandsaw N4400 Table of contents Table of Contents 1 General .......................................................................................................... 5 1.1 Explanations of the symbols .............................................................................................5 1.2 Information regarding the manual ....................................................................................5 1.3 Liability and warranty .....................................................................................................6
    [Show full text]
  • 100002768 Catalog.Pdf
    AMERICA’S FIRST AND FINEST SOLID STEEL STRIKING TOOLS SINCE 1923 ESTWING TOOLS NOW WITH THE WORLD’S BEST SHOCK REDUCTION GRIPS CATALOG NO. 06.2007 FULL LINE TOOL CATALOG TOOL LINE FULL Since 1923, the Estwing family has taken pride in designing and manufacturing the world’s most durable, comfortable and attractive striking tools. All claw hammers, axes, specialty tools and pry bars are manufactured to the highest possible standards and offer a true value to both tradesmen and craftsmen alike. Today Estwing’s shock reduction grip provides our customers with the best available grip for reducing vibrations caused by impact. Plus, this grip offers the utmost in both comfort and durability. This patented Estwing innovation is sure to be the standard for ergonomically correct hammers for decades to come. All of our nylon vinyl grip tools are now being made with this new material. Comfort, durability and dependability are the foundation of our proud tradition. We hope you will put this proud tradition to work for you! Made in the U.S.A. TABLE OF CONTENTS NAIL HAMMERS 5-10 AXES & WOOD SPLITTING TOOLS 11-13 BRICKLAYER HAMMERS 14-16 SPECIALTY TOOLS 17-19 DRYWALL HAMMERS 20-21 HATCHETS & ROOFING TOOLS 22-25 PRY BARS 26-29 GEOLOGICAL TOOLS 30-37 CHISELS, PUNCHES & NAIL SETS 38-40 SOFT FACE HAMMERS 41-43 INTERNATIONAL HAMMERS 44-47 SURE STRIKE HAMMERS 48-54 MERCHANDISERS 55 PROPER USE AND SAFETY INSTRUctIONS Proper Tool Use and Safety Instructions: Always use the correct tool for the job! Always wear safety goggles when using striking or struck tools.
    [Show full text]
  • Pneumatic Chipping Hammer #550640, JCT-3640 #550641, JCT-3641 #550642, JCT-3642 #550643, JCT-3643 #550644, JCT-3644 #550645, JCT-3645
    Pneumatic Chipping Hammer #550640, JCT-3640 #550641, JCT-3641 #550642, JCT-3642 #550643, JCT-3643 #550644, JCT-3644 #550645, JCT-3645 Operation & Parts Manual M-550640 Edition 4 11/2018 JET 427 New Sanford Road LaVergne, TN 37086 Ph.: 800-274-6848 www.jettools.com Copyright © 2017 JET Safety warnings General air tool warnings 12. Do not operate this tool while tired or under the influence of drugs, alcohol, or any 1. Read and understand this entire manual medication. before attempting assembly or operation. 13. Adopt a comfortable posture with proper 2. Read and understand all warnings posted on balance, and maintain secure footing at all the tool and in this manual. Failure to comply times. Non-slip footwear or anti-skid floor with all of these warnings may cause serious strips are recommended. injury. 14. Do not wear loose clothing or jewelry. Confine 3. Replace warning labels if they become long hair. obscured or removed. 15. Excessive air pressure and too much free 4. Do not use this tool for other than its intended rotation may decrease life of the tool and may use. If used for other purposes, JET disclaims cause a hazardous situation. any real or implied warranty and holds itself harmless from any injury that may result from 16. Check air hoses for wear, and keep them that use. away from heat and sharp edges. Repair or replace damaged air hose immediately. Do 5. Always wear ANSI Z87.1 approved safety not carry tool by the air hose. glasses or face shield while using this tool.
    [Show full text]
  • Section 555—Steel Structures
    Section 555—Steel Structures Description 555.01 Work. Construct steel structures and the steel structure portions of compos- ite structures. Furnish, fabricate, and erect structural steels, and perform incidental metal construction. Materials 555.02 Requirements. Furnish material that conforms to specifications in the following sections and subsections: Bearing Devices.................................................................. 564 Bolts & Nuts ....................................................................... 717.01(d) Castings .............................................................................. 717.04 Elastomeric Compression Joint Seals .................................. 717.16 Falsework ........................................................................... 562 Galvanized Coatings ........................................................... 717.07 High-Strength Bolts, Nuts, & Washers ................................ 717.01(e) Painting .............................................................................. 563 Pins & Rollers .................................................................... 717.03 Sheet Lead .......................................................................... 717.08 Steel Forgings ..................................................................... 717.02 Steel Grid Floors ................................................................. 717.09 Steel Pipe ............................................................................ 717.06 Structural Steel ..................................................................
    [Show full text]