SDF sustainable design fiberboard

Features & Benefits

• Awarded CARB NAF Exemption due to ® synthetic resin system Medex is a sustainable, moisture resistant, medium density fiberboard (MDF) panel utilizing a synthetic resin system and pre-consumer recycled wood • Significantly exceeds standard MDF physical properties fiber. Medex® is engineered for interior high moisture areas in non-structural • Meets physical properties of ANSI A208.2- applications and is used in place of sanded plywood or solid wood. With the 2009 Grade 155 MR50 versatility of a superior composite wood panel and the enhancement of indoor air • Passes the ASTM D1037-06a six cycle quality, Medex® has been specified in hundreds of commercial, institutional and accelerated aging test conservator projects since the 1980s. Manufactured in Medford, OR. • FSC® certified panels available upon request Technical Data Imperial Metric Mill Capabilities Density 48 lb/ft3 769 kg/m3 • Panels available in 4’ and 5’ widths and lengths Internal Bond 200 lb/in2 1.38 N/mm2 up to 18’ Modulus of Rupture 5,500 lb/in2 37.89 N/mm2 • Thicknesses ranging from 1/4” - 1-1/4” Modulus of Elasticity 600,000 lb/in2 4,134 N/mm2 • Available in higher densities with a minimum Modulus of Hardness 1,200 lbs, Janka ball 5,115 N order requirement Screw Holding, Face 325 lbs 1,446 N • Minimum order may be required for some sizes and thicknesses Screw Holding, Edge 280 lbs 1,245 N Thickness Tolerance + 0.005 inch +0.127 mm Handling & Installation Thickness Swell 3% • Store indoors on a flat, level surface with Linear Expansion 0.25% adequate support to prevent sagging Water Absorption 6% • Refer to Architectural Woodwork Standards Flame Spread Rating Class 3 (C) (AWS) for fabrication and installation procedures. Moisture Content 4 - 6% • For best results, Medex® should be Formaldehyde Emissions as low as 0.01 ppm Average physical properties for 3/4” panel, based on a 5 panel average, when tested in accordance with ASTM D1037. Specific design conditioned to the environment 48-72 hours applications and technical data are available upon request. Emissions tested in accordance with ASTM E-1333. prior to installation. SCS Certified LEED® 2009 Credits Supported Finishing Instructions 92% Pre-Consumer Materials & Resources: 4, 5, 7 Guidelines for commercial signage applications Recycled Content Indoor Environmental Quality: 4.4 are available on our website or by request from Roseburg. LEED® v4 Credits Supported Indoor Environmental Quality - How to Specify FSC-C017580 Low-Emitting Materials: Composite Industrial Grade Medium Density Fiberboard The mark of responsible Wood Evaluation (MDF), manufactured with a synthetic resin system forestry Materials & Resources - which meets physical properties of ANSI A208.2- (Available upon request) Building Product Disclosure and Optimization 2009 Grade 155 specifications. - Sourcing of Raw Materials - Material Ingredients Limitations ECC Certified - Environmental Product Declaration Medex® is not suitable for structural applications, Specification CPA ECC 4-11 exterior siding or exterior trim. CARB Third Party Certifier CHPS Compliant TPC-1 Meets Materials Specifications for VOC emissions section 01350

Ideal Applications SCS Validation • LEED® Projects No Added Formaldehyde • Countertops • Window Sills • Bathroom & Kitchen Cabinets/Woodwork 541-784-4070 • Bow & Bay Window Boards • Display Cases • Raised Panel Door Inserts P.O. Box 1088, Roseburg, OR 97470 www.Roseburg.com Revised 09/15