LSRP Series Inclinometer Making Sense Out of Motion…

An extremely sensitive and rugged transducer designed to provide horizontal angle or vertical deviation measurements with virtually infinite resolution.

The Jewell LSRP Series meets the needs of applications with space Dimensional Drawing: LSRP Inclinometer Series constraints. The fluid damped compact, cylindrical shape and the "stacking" feature of the LSR facilitate the use of several inclinometers when multi-axis measurement is required. The LSRP offers precise readings with high outputs at lower range frequencies.

Features & Benefits • ±1° to ±90°C Input Full Range • Only 1.4" diameter X 1.60" Tall in Size • Withstands 20 grms of vibration • Stackable for 2-Axis Sensing • Solder Pins Terminations

Pin-Out: LSR Inclinometer Series Applications • Heavy Construction Grading • Ship and Barge Leveling • Deviation Surveys • Continuous Casting • Weapons Platform Leveling • Steel Mill Ladle Position • Oil and Gas Well Bore Mapping • Geophysical Monitoring • Mobile Antenna Positioning

Rev 3

Via Paolo Uccello 4 - 20148 Milano Tel +39 02 48 009 757 Fax +39 02 48 002 070 [email protected] www.dspmindustria.it LSRP Series Inclinometer Making Sense Out of Motion…

LSRP Inclinometer Specifications PERFORMANCE Input Range (°) ± 1.0 ± 3.0 ± 14.5 ± 30.0 ± 90.0 Full Range Output (FRO), ±1% (Note 1) ± 5.0 ± 5.0 ± 5.0 ± 5.0 ± 5.0 Non Linearity (%FRO, Max.) (Note 2) 0.05 0.05 0.02 0.02 0.05 Scale Factor (V/g, Nom.) 286.5 95.5 20.0 10.0 5.0 Scale Factor Temp Sens (PPM/°C, Max.) 400 300 100 60 60 Natural Frequency, Hz, (Nom.) (Note 3) 1.0 2.0 15.0 20.0 40.0 Bandwidth (-3db), Hz, (Nom.) 1.0 2.0 15.0 20.0 40.0 Transverse Axis Misalignment, (°, Max.) 0.10 0.15 0.25 0.50 1.00 Output at 0° Tilt, Volts, (Max.) 0.10 0.04 0.02 0.02 0.02 0° Output Temp. Sens, (Volts/°C, Max.) 0.005 0.003 0.001 0.0005 0.0003 Resolution and Threshold 1 µradian

ELECTRICAL Input Voltage (Vdc) (Note 4) ±12 to ±18 Input Current (mA, Nom.) ±15 Output Impedance (Ohms, Nom.) 15k 5k 16k 8k 4k Noise (Vrms, Max.) 0.002

ENVIRONMENTAL Operating Temp Range -18°C to +71°C Survival Temp Range -60°C to +90°C Vibration 20 grms Shock 1500g, 0.5 msec, 1/2 sine Seal MIL-STD 202, Method 112 Weight 4.0 oz. Notes: 1 - Full range is defined as "from negative full input angle to positive full input angle." 2 - Nonlinearity is specified as deviation of output referenced to theoretical sine function value, independent of misalignment. 3 - Output phase angle = 90° 4 - Unit Power connections can easily be adapted for operations from single-ended, floating power supplies of 24 to 36 Volts DC.

How to Order LSRP Series

LSRP-1 02550276-001 LSRP-3 02550276-002 LSRP-14.5 02550276-003 LSRP-30 02550276-004 LSRP-90 02550276-005

Via Paolo Uccello 4 - 20148 Milano Tel +39 02 48 009 757 Fax +39 02 48 002 070 [email protected] www.dspmindustria.it Making Sense Out of Motion LSRP Single-Axis Analog Inclinometer

The Jewell LSRP Series inclinometer is an extremely sensitive, rugged transducer designed to provide horizontal angle or vertical deviation measurements with virtually infinite resolution. These fluid damped compact, cylindrical shaped sensors are stackable to meet the needs of applications with space constraints while

facilitating the use of several inclinometers for

H multi-axis measurements. OD02550088-000

REVISIONS REV

29.58 NO. DRAWING REV. DESCRIPTION DATE ECN 1.165 E REDRAWN W/CHANGE RN 1808 6/1/92 NCD 14.79 .582 7.6 F REVISED LOGO 3-24-04 16233 FEATURES: .30 G ADDED MISSING DIMENSIONS 11-15-07 20546 REDRAWN IN SOLIWORKS, ADDED H 1.01 DIM, ADDED ISO VIEWS 11-16-11 23783 .18 • ±1° to ±90 Input Full Range AXIS 4X #1(.073)-72 MINIMUM

SENSITIVE [.47] 15.24 • Only 1.4” diameter X 1.60” .600Tall in Size 36.3 33.27 • Withstands 20 grms of vibration1.43 1.310 2 • Stackable for 2-Axis SensingMFG IDENT • Solder Pins Terminations 3 40.6 1.60 NOTES:

• RoHS version available 1. DIMENSIONS SHOWN IN BRACKETS ARE IN MILLIMETERS, TOLERANCES ARE: .X= 0.25; .XX= 0.13. H

OD02550088-000 REVISIONS

MOUNTINGREV DRAWING NO. DRAWING 2. DIRECTION OF SENSITIVE AXIS IS NOT MARKED ON UNIT 29.58 SURFACE REV. DESCRIPTION DATE ECN & IS SHOWN FOR REFERENCE ONLY. 1.165 25.7 4.6 .18 E REDRAWN W/CHANGE RN 1808 1.01 6/1/92 NCD 14.79 3. NAMEPLATE CONTAINS THE FOLLOWING: .582 JEWELL INSTRUMENTS LLC, UNIT TYPE, AND SERIAL NUMBER. 7.6 F 1.93REVISED LOGO 3-24-04 16233 .30 5.8 G ADDED4X .076 MISSING DIMENSIONS 11-15-07 20546 4. PERFORMANCE SPECIFICATIONS PER SP-60149. 4X .23 PIN FUNCTION REDRAWN IN SOLIWORKS, ADDED H 1.01 DIM, ADDED ISO VIEWS 11-16-11A 23783+15V .18 33.27 14.35 AXIS 4X #1(.073)-72 MINIMUM B PWR & SIG COMMON SENSITIVE [.47] 1.310 .565 28.7 C -15V ENVELOPE DRAWING 15.24 1.13 D SIGNAL HIGH DIMENSIONS ARE IN INCHES AND .600 E SELF TEST APPLICATION APPLY TO PART BEFORE FINISHING USED ON THIS DRAWING COVERS A PROPRIETARY ITEM APPLICATIONS:AND IS PROPERTY OF JEWELL INSTRUMETNS, LLC. 33.27 NEXT ASSY THIS DRAWING IS NOT TO BE COPIED OR USED 36.3 WITHOUT PERMISSION. JEWELL INSTRUMENTS, LLC. 1.310 CONTRACT NUMBER MANCHESTER NEW HAMPSHIRE 1.43 7.6 TOLERANCE UNLESS SPECIFIED TITLE TWO PLACE DECIMALS (.00) .01 .30 .18 MATERIAL THREE PLACE DECIMALS (.000) .005 2X #8(.164)-32 MINIMUM ANGLES 1° SERVO INCLINOMETER 2 [4.7] • Heavy ConstructionRAW MATL - COMMERCIAL STANDARD Grading 15.24 DRAWN DATE LSRP SERIES .600 TAD 11/16/2011 DRAWING NO. REV MFG IDENT FINISH DATE CHECKER OD02550088-000 H 3 APPROVED DATE SCALE EPA# CAGE CODE • Ship and Barge Leveling1:1 33005 SHEET 1 OF 1

40.6 1.60 NOTES: • Deviation Surveys Dimensions:1. DIMENSIONS SHOWN in [mm] IN BRACKETS ARE IN MILLIMETERS, TOLERANCES ARE: .X= 0.25; .XX= 0.13. • Continuous Casting MOUNTING SURFACE 2. DIRECTION OF SENSITIVE AXIS IS NOT MARKED ON UNIT & IS SHOWN FOR REFERENCE ONLY. 25.7 4.6 1.01 .18 • Weapons Platform Leveling 3. NAMEPLATE CONTAINS THE FOLLOWING: JEWELL INSTRUMENTS LLC, UNIT TYPE, AND SERIAL NUMBER. 1.93 • Steel Mill Ladle Position BLOCK:5.8 4X .076 4. PERFORMANCE SPECIFICATIONS PER SP-60149. 4X .23 PIN FUNCTION A +15V 33.27 14.35 B PWR & SIG COMMON • Oil and Gas Well Bore Mapping 1.310 .565 28.7 C -15V ENVELOPE DRAWING PIN A 1.13 D SIGNAL HIGH +12 to +18 VDC APPLICATION DIMENSIONS ARE IN INCHES AND • Geophysical Monitoring E SELF TEST APPLY TO PART BEFORE FINISHING USED ON THIS DRAWING COVERS A PROPRIETARY ITEM AND IS PROPERTY OF JEWELL INSTRUMETNS, LLC. NEXT ASSY THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT PERMISSION. JEWELL INSTRUMENTS, LLC. 7.6 CONTRACT NUMBER MANCHESTER NEW HAMPSHIRE PIN B Power/Sig Common TOLERANCE UNLESS SPECIFIED TITLE • Mobile Antenna Positioning TWO PLACE DECIMALS (.00) .01 .30 .18 MATERIAL THREE PLACE DECIMALS (.000) .005 2X #8(.164)-32 MINIMUM ANGLES 1° SERVO INCLINOMETER [4.7] RAW MATL - COMMERCIAL STANDARD 15.24 DRAWN DATE LSRP SERIES TAD 11/16/2011 DRAWING NO. REV PIN.600 C -12 to -18 VDC FINISH CHECKER DATE OD02550088-000 H APPROVED DATE SCALE EPA# CAGE CODE PIN D Eo [Volts/g] 1:1 33005 SHEET 1 OF 1 PIN E Self-Test

1

Via Paolo Uccello 4 - 20148 Milano Tel +39 02 48 009 757 Fax +39 02 48 002 070 [email protected] www.dspmindustria.it PERFORMANCE SPECIFICATIONS

PERFORMANCE

INPUT RANGE (°) ±1.0 ±3.0 ±14.5 ±30.0 ±90.0 FULL RANGE OUTPUT VDC (FRO ± 1%)1 ±5.0 NON LINEARITY (%FRO max)2 0.05 0.05 0.02 0.02 0.05 SCALE FACTOR (V/g, nominal) 286.5 95.5 20.0 10.0 5.0 SCALE FACTOR TEMP. SENSITIVITY (ppm/°C, max) 400 300 100 60 60 BANDWIDTH (-3db, Hz, nominal) 0.5 2.0 15.0 20.0 40.0 TRANSVERSE AXIS MISALIGNMENT (° max) 0.10 0.15 0.25 0.50 1.00 OUTPUT AT 0° TILT (Volts, max) ±0.10 ±0.04 ±0.02 ±0.02 ±0.02 0° OUTPUT TEMP. SENSITIVITY (Volts/°C, max) 0.005 0.003 0.001 0.0005 0.0003 RESOLUTION & THRESHOLD (µradian) 1

ELECTRICAL INPUT VOLTAGE RANGE (VDC)4 ±12 to ±18 INPUT CURRENT (mA, max) 15 OUTPUT IMPEDANCE (Ohms, nominal) 15k 5k 15k 8k 4k NOISE (V, rms max) 0.002

ENVIRONMENTAL

OPERATING TEMPERATURE RANGE -18° to +71°C STORAGE TEMPERATURE RANGE -40° to +71°C 1 SHOCK 1500g, 0.5 msec, /2 sine SEAL MIL-STD 202, Method 112 VIBRATION 20 grms WEIGHT 4.0 oz

NOTES: 1. Full range is defined as “from negative full input angle to positive full input angle.” 2. Nonlinearity is specified as deviation of output referenced to theoretical sine function value, independent of misalignment. 3. Output phase angle = -90° 4. Unit Power connections can easily be adapted for operations from single-ended, floating power supplies of 24 to 36 Volts DC.

Specifications are subject to change without notice due to continued product development

2

Via Paolo Uccello 4 - 20148 Milano Tel +39 02 48 009 757 Fax +39 02 48 002 070 [email protected] www.dspmindustria.it ORDERING INFORMATION

HOW TO ORDER

RoHS Version Military Grade

MODEL # PART # MODEL # PART # ±1.0 LSRP-1 02550389-001 ±1.0 LSRP-1 02550276-001 ±3.0 LSRP-3 02550389-002 ±3.0 LSRP-3 02550276-002 ±14.5 LSRP-14.5 02550389-003 ±14.5 LSRP-14.5 02550276-003 ±30.0 LSRP-30 02550389-004 ±30.0 LSRP-30 02550276-004 ±90.0 LSRP-90 02550389-005 ±90.0 LSRP-90 02550276-005

FI27 © Jewell Instruments 2020

Via Paolo Uccello 4 - 20148 Milano Tel +39 02 48 009 757 Fax +39 02 48 002 070 [email protected] www.dspmindustria.it