12th NIMS-MPAS-IfWD Workshop
Advanced Data Evaluation and Assessment Concepts Concerning Creep and Creep Rupture by aeroplane From Rhein-Main Airport take the HEAG bus line „Airliner“ (departure from bus lane 14 next to arrival October 19th 2018, Darmstadt level C at the airport) directly to Darmstadt, bus stop Hauptbahnhof. Proceed by bus (line D, F or H) to Lu- isenplatz, or by Tram No. 3 to Bismarckstraße from either place, you walk for approx. 5 minutes until you reach the MPA/lfW building in Grafenstraße 2. Or (the less convenient alternative): From Rhine- Venue Main Airport by suburban train to Frankfurt – Haupt- Technische Universität Darmstadt bahnhof (Central Station), there you have to change Fachgebiet und Institut für Werkstoffkunde (IfW) and take a train to Darmstadt – Hauptbahnhof. You Grafenstrasse 2 continue by bus (line D or F) up to Luisenplatz, from 64283 Darmstadt (Germany) there, you walk for about 5 minutes until you reach the MPA/lfW building in Grafenstraße 2. by train Scientifi c Board Darmstadt Hauptbahnhof (Central Station), by bus (line D, F or H) to Luisenplatz, from there, you walk Matthias Oechsner, IfW TU Darmstadt for approx. 5 minutes until you reach the MPA/lfW Kazuhiro Kimura, NIMS, Tsukuba, Japan (1) building in Grafenstraße 2. Andreas Klenk, MPA Universität Stuttgart
Zentrum für Konstruktionswerkstoffe Local Organization Staatliche Materialprüfungsanstalt Darmstadt Fachgebiet und Institut für Werkstoffkunde Grafenstraße 2 Ludwiga Ellermeier-Block D-64283 Darmstadt Christian Kontermann Michael Schwienheer www.mpa-ifw.tu-darmstadt.de Scientific Program 11:30h – 12:00h Registration 9:00h – 9:15h Creep rupture data assessment with conventional Words of Welcome and probabilistic methods The registration should be made Matthias Oechsner, IfW Darmstadt Stefan Linn, Felix Kölzow, IfW Darmstadt via email latest until October 12th 2018 12:00h – 12:30h 9:15h – 9:45h using the following email-adress: Material Data and Methods for Design and Validation procedures of creep rupture data Life Assessment of Future Power Plants assessments using the example of a large P91 [email protected] Andreas Klenk, Magdalena Speicher, MPA Stuttgart dataset Klaus Metzger, GKM, Mannheim Michael Schwienheer, IfW Darmstadt
9:45h – 10:15h 12:30h – 13:00h Get Together
Extrapolation in the creep regime for base Creep rupture and ductility behaviour – You are kindly invited to join the arranged Get materials and welds - methods, data evaluation and interpretation Together which will take place on microstructural consideration for long-term tests Magdalena Speicher, Johannes Schleyer, Torsten-Ulf Kern, Siemens AG Thursday, October 18th 2018 Florian Kauffmann, MPA Stuttgart Karl-Heinz Mayer, former Alstom Energy starting at 8:00pm Christian Heinemann, IfW Darmstadt Yan Wang, IfW Darmstadt Florian Kaufmann, MPA Stuttgart at the Restaurant Sitte, Darmstadt. 10:15h – 10:45h http://www.restaurant-sitte.de/ Establishment of allowable stress values up to 500,000 h for Grade 91 in ASME Code 13:00h – 14:00h Kazuhiro Kimura, NIMS, Tsukuba, Japan Further Discussion & Buffet
10:45h – 11:00h 14:00h – 16:00h Further Discussion & Coffee Workshop: Future Collaboration (Knowledge & Data Sharing, Key Topics / Common Future Publications) 11:00h – 11:30h Moderators: Christian Kontermann, IfW Darmstadt Effect of initial microstructure on long-term Andreas Klenk, MPA Stuttgart creep strength in Grade T91 steel. Kazuhiro Kimura, NIMS, Tsukuba, Japan Kota Sawada, NIMS, Tsukuba, Japan