BIO-MAGNETIC AMETHYST TOURMALINE MINI V-MAT QUICK START GUIDE MEDICRYSTAL® MINI MAT SET INCLUDES:  size: 32"x20" (80x50 cm)  heating area: 26"x19" (60x47 cm) mini CARRY AND STORAGE printed owner’s 1 or 2 valuable toppers permeable mat BAG for your mat guide for IONS, FIR RAYS and pemf:  FIR HEAT ADJUSTABLE FROM 86 °F TO 158 °F HIGH ABSORPTION BREATHABLE  2 BIMETAL SENSORs WATERPROOF MULTILAYER  2 thermostat SENSORs PROTECTION COVER TO KEEP MAT CLEAN  3 PEMF COILS and/or  4.5 lbs of crushed Amethyst Crystals 3D AIR MESH PAD TO CUSHION MAT AND  1.5 lbs of crushed tourmaline Crystals H-60VA PROVIDE BODY SUPPORT operational  HEATING POWER: 130w, voltage 110v, 60hz DISTRIBUTING STONES CONTROLLER PRESSURE  Total weight: 10 lbs / gross weight: 14.5 lbs with wires

Mat electrical connector for controller plug. Tight connection between the mat and controller is essential to avoid errors and faults EMF 19 FREE HEATING layers SYSTEM 2 1 10 3 4 Reveals crystals’ powers and brings natural forces into your 5 home* 6 Provides a restful and calming 7 setting in the middle of 8 Crystals are infused inside modern civilization* Natural Amethyst the red-brown tubes Creates an energized

10 environment to feel inspired 9 and happy* 13 32" Great complement to massage, 26" 14 yoga and reiki* heating area 15 19" Helps to balance chakras’ activity and clean energy 16 channels* 20" With a V-shape window showing a thick layer 18 of crushed Natural Purple Amethyst and Natural 14 different PEMF programs or Non-Ceramic Black Tourmaline filled inside manual magnetism frequency 19 eco-suede wavy tubes across all the mat from choice between 1 and 30 Hz to Natural Black Tourmaline edge to edge create relaxation, energizing or harmonizing environment

1 Layer 1 – High quality heat resistant reddish brown eco-suede which is elegant, soft, Layer 11 – Thermostat sensors measuring temperature in the different points of multilayer comfortable, durable and easy to clean, featured with MediCrystal® Logo on the top. structure and reporting to the controller. This is the current mat’s temperature that you 2 Layer 2 – Transparent film with V-shape which acts as a window to view Amethyst and can see on the controller display. The temperature sensors help to maintain uniform Tourmaline gemstones. heat level throughout the mat as set by user. They are also a part of overheat protection 3 Layer 3 – High Grade «A-AB» crushed to 2-10 mm and tumbled natural, not chemically controller system. treated Purple Amethyst crystals and Black Tourmaline gems. Hot crystals release heating Layer 12 – Bimetal switches for emergency overheat protection with automatic power Far InfraRed (FIR) rays and Negative Ions.* shut-off feature if the controller overheat protection system fails and the mat heats up to 4 Layer 4 – Cotton layer with charcoal lamination for thermal preservation and even heat 80°C or 176°F. distribution. 13 Layer 13 – Cotton fabric laminated with red clay accumulating heat, discharging Negative 5 Layer 5 – Non-woven functional fabric layer for increased release of Negative Ions. Ions, naturally releasing Far InfraRed rays. 6 Layer 6 – Waterproof and thermal preservation complex aluminum film layer for protection 14 Layer 14 – Charcoal fabric layer releasing Far InfraRed (FIR) Rays and Negative Ions, of inner mat sensors and heating systems from moisture and sweat. decomposing and deodorizing smell. 7 Layer 7 – Electronic-wave proof copper fiber fabric EMI (Electro Magnetic Interceptor) 15 Layer 15 – Pure aluminum foil FIR reflection layer blocks heat from being conducted layer for primary shielding user from any remaining electromagnetic fields (EMF). downwards and assists other layers to evenly distribute and continually release the heat. 8 Layer 8 – Aluminum foil EMI layer blocking EMFs and uniformly distributing the heat to the 16 Layer 16 – Non woven fabric layer for heat absorption and preservation. upper layer with gemstones. Layer 17 – VLF PEMF (Very Low Frequency Pulsed Electromagnetic Fields) system coils. 9 Layer 9 – Durable 0.2 mm non-woven glass fiber fabric layer for heating wire fixing and 18 Layer 18 – Compressed non-woven cotton padding for thermal protection and increased protection. comfort. 10 Layer 10 – Unique silicon heating wires in teflon insulation twice shielded with copper 19 Layer 19 – Waterproof eco-leather or polyester peach skin fabric for durability, tension and foil to completely eliminate EMFs. resistance, and protection from moisture, dirt and wear.

All products, controllers, specifications and data as well as a set of items packaged in a box are subject to change without notice to improve reliability, function or design of the devices. Please, check for the most updated products details at www.MediCrystal.com web site. BIO-MAGNETIC AMETHYST TOURMALINE MINI V-MAT QUICK START GUIDE

1. Consult your health professional to make sure that you can use red light, hot stones, 11. Start with the mat on the lowest heat settings, 35-40 °C or 96°–112 °F, and short FIR sauna, and PEMF (pulsed electromagnetic fields). Take extra care if you have any sessions only for 15-20 minutes (do not forget to preheat the mat, it will be slightly health issues. warm) and watch how your body reacts. 2. Read the USER GUIDE, safety instructions, «use with caution» and contraindication 12. If you enjoy shorter sessions and your body reacts well, move up to longer or more sections to be sure that the mat is OK for you, especially if you are going to use it on high intensive and frequent sessions. heat settings or sleep on it. 13. Gradually increase the temperature by several degrees and session time by 5 minutes 3. Drink a lot of water, juices, herbal teas before, during, and after sessions, and replenish each other day, and only if you feel comfortable and want more intensive experience. minerals such as calcium, potassium, sodium, magnesium and others which may be lost 14. You should choose the length, intensity and frequency of the sessions so that you feel with perspiration or urine. comfortable and refreshed. If your mat is equipped with adjustable frequency controller, 4. Create a relaxing surrounding atmosphere. it is suggested to start PEMF at a low frequency such as 4 Hz then increase to 8, 10 or 14 5. Put the mat on your bed or on the floorwith crystals facing up. Hz. Usually lower frequencies have more calming effects while higher frequencies provide 6. Connect the controller to the mat very tightly, then to the power socket. more stimulation and promote activity. 7. Turn the controller ON and set the timer, only then set the max temperature to test the 15. You should also have some rest between the sessions and never start with more than mat for an hour. While it is cooling down, test PEMF functions for 15-20 minutes. Do three a week before you are better informed as to how they influence you. not put the protector on the mat or lay on it during this time. 16. You can also try the PEMF function, on the lowest heating levels, for 20-30 minutes 8. Cover the mat ENTIRELY with a blanket to pre-heat the stones for 30-60 minutes to to check how your body reacts. Later if necessary you will be able to use all the functions set level. If the mat is covered only PARTIALLY, it may cause different temperatures in or any of their combinations together. However, we recommend not to use PEMF on high different parts of the mat, sensors disruption and controller malfunction. heat to avoid overstimulating. 9. Do not move a lot on the mat, do not stand on it, do not bend it and do not put your 17. You should not feel any discomfort – but if there is any, rest several days, and restart head on hot stones. While heating NEVER put on the mat foam, rubber, yoga, camp with the temperature, length and frequency set to the lowest possible. pads, mats, other non-permeable covers or too thick (more than one inch) plies of towels 18. Unplug your controller from the wall socket always when not in use. But do not or heavy blankets. NEVER put any solid objects such as pillows, laptops, books, bags, disconnect controller from the mat more frequently than necessary, in order to avoid controllers, etc. on the heating surface to avoid overheat, malfunction and fire risks. the connection becoming loose. 10. If mat is too hard for you, put some of the included pads or covers on the mat to cushion it and eliminate the crystals’ pressure. You may add more towels if necessary.

CONTROLLER H-60VA for mats, pads and belt with PEMF function

1 Power ON/OFF Toggle Button – Push it to turn the mat ON/OFF. When you turn it ON, the Display  will show ON. It means that the controller is ON and ready to choose the program. If controller display shows -- it means that the Power is connected but the 9  8 6 Button has not been activated and no functions can be operated. Press power button again with some effort so that display shows ON. 2 POWER Indicator – Lights up when Power is ON. 3 Timer Control Toggle Button – Select one of 4 options shown on the Display : 1H, 4H, 8H, 0H for 1, 4, 8, 12 hours heating 7 10 session with auto shut-off when time expires or you can choose-H (NO HEATING MODE) for only PEMF function without heating. 11 Press and hold for 5 seconds to turn OFF Auto-Protection Feature, Display  will show S-. Press and hold again to reactivate this feature, Display  will show SA. 4 «HEATING» Operation Indicator – ON when mat is heating, OFF when set temperature is reached. 5 Temperature, Timer, Frequency and Program Display – Switches into Temperature Mode when the Temperature Dial  is 3 rotated. Display shows the current Celsius temperature (30–70 °C), flashes to the set temperature when dial is rotated, then 4 back again. If the temperature is more then 122 °F (50 °C) for longer than 3.5 hours, Auto-Protection Feature will decrease it to safe 1 115 °F (45 °C) level and display will show [ ]. 2 In Timer mode Display shows one of 5 heatings time settings 1H, 4H, 8H, 0H or -H chosen by Timer Control Button . When the heating program is over the temperature display will show --, OF or ON indicating that Power is ON but the time set has expired. 5 Add time to resume heating or push the Power Button  to turn-off the Controller. In PEMF Program mode Display shows one of PEMF program settings. P- (PEMF OFF for FAR INFRARED heating function only), PO (manual frequency adjust mode), P1, P2, P3, P4, P5, P6, P7, P8, P9, PA, PC, PE, PF (automatic PEMF programs). Please, check Controller user guide for details. If Manual Frequency adjust dial  is in active mode Display shows current PEMF frequency in Hz (1–30 number of pulsations per second). Please, check Controller user guide for details. Display may also show OF, flickering or static-- if the Power Button  is not pressed or if connection between the controller and the mat is lost. Press Power Button  to turn ON all other functions of controller or reconnect controller to the mat tightly to resume. 6 Adjust Temperature Dial – Use to increase or decrease heat 30~70 °C (86~158 °F). The dial range is marked, indicating the desired temperature in °F. 7 PEMF Program Button – Choose P- (PEMF off) one of 13 automatic Program options P1, P2, P3, P4, P5, P6, P7, P8, P9, PA, PC, PE, PF shown on the Display  or switch to manual frequency adjust mode PO. Press and hold for 3 seconds to quickly return to P- (PEMF off). Please, check Controller user guide for details. LEGAL DISCLAIMER 8 Adjust PEMF Frequency Dial – Use to increase or decrease magnetic pulsation frequency from 1 to 30 times per second. You can try different frequencies to find what works better for you. *MediCrystal® stone mattresses, mats, pads, belts, wraps, pillows can 9 Adjust PEMF Frequency Dial ON Indicator – Lights up when PEMF manual adjust dial is ON, frequency is chosen in manual help you create a relaxing, soothing and re-energizing environment to maintain your wellness, balance, good sleeping, physical strength and mode, PEMF is ON, OFF when it stops. fitness and awaken the restfulness, comfort and invigoration powers and 10 PEMF ON Indicator – Lights up when PEMF function is ON, OFF when it stops. energies. Together with exercises and healthy diet MediCrystal® products 11 PEMF PROGRAM CYCLE Indicator – Lights up when PEMF is auto cycled by program. OFF when the whole Program is over. may supplement your daily activity and become an important part of your healthy lifestyle which can improve your ability to do the everyday things and enhance life experience. MediCrystal® products are not intended to diagnose, cure, treat, mitigate, or prevent any disease, illness or medical If your mat is rated for the North American 110-120V voltage and your controller is with the U.S. standard condition or to substitute medical treatment of any kind or to affect the NEMA 5-15P (two-pole with ground pin) plug, use it only with the step-down 220-250V to 110V voltage structure or any function of the body. Information here is never to be converter in the 220-250V 50Hz countries. The maximum wattage of such converter should be at least construed a medical advice. It does not reflect or represent a product 2-3 times higher than the mat’s power consumption. Do not connect the 110-120V mat into the 220-250V claim. FDA has not approved or evaluated MediCrystal® products or this outlet through an adapter. If you plug in a device that isn’t rated for the outlet’s voltage, it may be severely information. All products, specifications, and data are subject to change damaged, and cause fire risks! without notice to improve reliability, function or design of the products. All products, controllers, specifications and data as well as a set of items packaged in a box are subject to change without notice to improve reliability, function or design of the devices. Please, check for the most updated products details at www.MediCrystal.com web site.