800-866-2227 / www.tubeliteinc.com
Standard Medium Stile Entrances Our Standard Medium Entrances are designed for moderate to heavy use in commercial applications. Standard Medium Stile has 4" vertical stiles and top rail, and 6-1/2" bottom rail – optional up to 10" for ADA compliance. The smooth design of Tubelite’s door hardware features a convenient pull handle and push bar with lock location 36" above the finished floor. Durable Tie-Rod Construction The strength and flexibility of steel tie-rod construction is what holds it all together and makes our doors endure. Tie-rod assembly is as durable as welded corner construction, but superior in many ways. Tubelite doors can be modified, disassembled or resized right in the field. No other door offers you this much strength and flexibility.
400 Series Curtainwall
ALSO USED WITH 14000 Series More dependable Storefrontthan ever! 800-866-2227 / www.tubeliteinc.com
Standard Medium Stile Entrances
1-3/4"
4"
System Features: • Standard 4" (101.6Mm) sight line on verticals and top rail • Deadbolt lock • 1" dia. push bar and offset pull handle • Standard infill options 1" (25.4mm), and 1/4" (6.35mm), other infills available • 3'0" and 3'6" width single doors, 6"0" width pairs of doors • 7'0" height door leaves
Optional Features: Note: Dimensions do not include 1/2" glass stops. • 6" (152.4Mm) and 10" (254mm) bottom rails • Mortised butt hinges, offset pivots, continuous hinges, center pivots Standard Entrance Series Medium Stile • Latch locks, cvr & rim panics, electric strikes Traffic Moderate to Heavy • Hardware by others Vertical Stile 1-3/4" x 4" • 1-3/4" or 2" x 4-1/2" sight line frame member • Intermediate horizontal or vertical mid-rails Top Rail 1-3/4" x 4"
• A wide variety of standard anodized and painted colors are Bottom Rail 1-3/4" x 6-1/2" (opt. up to 10") available to complement any project with warrantied protection, as well as street appeal. Single: 4’0” x 9’ 0” Maximum Sizes • Custom height and width doors Pair: 8’0” x 9’ 0”
Standard Medium Series Product Specifications
Application: Retail Stores, Museums, Hotels Description: 4" vertical stiles and top rail, and 6-1/2" bottom rail – optional up to 10" for ADA compliance Air U-Factor** U-Factor ** Glass: Structural: Infiltration: Single Door: Double Door:
1" std 1.0 CFM / Ft.2 30 PSF – Design Medium: 0.72 Medium: 0.68 (1/8" – 1") @ 1.57 PSF 45 PSF – Overload
** U-Factor per NFRC 100. COG = 0.24 with warm edge spacer, 1-3/4” x 4-1/2” non-thermal frame. Refer to the U-Factor table at: www.tubeliteinc.com/products/entrances/standard-medium/ for other glass makeups and configurations.
DISCLAIMER: Tubelite takes no responsibility for product selection or application, including, but not limited to, compliance with building codes, safety codes, laws, merchantability or fitness for a particular purpose; and further disclaims all liability for the use, in whole or in part, of this Technical Guide in preparation of project specifications and/or other documents. Technical Guides are subject to change at any time, without notice, and at Tubelite’s sole discretion. ©2017 Tubelite Inc. 071320
3056 Walker Ridge Drive NW, Suite G, Walker, MI 49544