DOCSLIB.ORG

Petri Dishes

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Petri Dishes Petri Dishes 31 petri dishes Petri Dishes, 30mm, 50mm, 55mm, 60mm G Ideal for use when savings in media or incubator space are required G 55mm dish accommodates 47mm membrane filters making it suitable for water testing G 50mm deep form dish (product code 124) is over 20mm deep and designed for use with liquid media G Aseptically manufactured under clean room conditions (class 7 ISO14644) to exclude microbiological contamination Product Description Vents Sterility Base Inner Case Code OD x OH Pack Qty (mm) 121V Petri dish, 30mm Triple AS 35 x 11 10 800 122 Petri dish, 50mm Single AS 52 x 14.5 10 700 124 Petri dish, 50mm, Single AS 50 x 20.3 20 500 deep form PF55 Petri dish, 55mm None AS 55.5 x 12 15 1620 PF55V Petri dish, 55mm Triple AS 55.5 x 12 15 1620 123 Petri dish, 60mm Single AS 60 x 15.1 10 540 Petri Dishes, 90mm, Standard G Used by microbiologists to culture micro-organisms on solid media G Available either: - Aseptically manufactured under clean room conditions (class 7 ISO14644) to exclude microbiological contamination - Terminally sterilised by gamma irradiation G CE marked in accordance with European Directive 98/79/EC G In vitro use only G Produced and tested in accordance with the BS611 part 2 standard, which includes stringent dimensional controls G Ideal for use in automatic plate pourers G Available in single,triple and non-vented formats - Triple vented - aids gaseous exchange. Ideally suited for short term work - Single vented - limits gaseous exchange, minimises evaporation and dehydration. Ideally suited for long term work - Non-vented – most suitable for anaerobic and long term work G Manufactured from virgin polystyrene G Mirror finished moulds ensure high optical clarity Product Description Vents Sterility Base Inner Case Code OD x OH Pack Qty (mm) Qty 101R20 Petri dish, 90 mm Single AS 89.25 x 16.0 20 500 101/IRR Petri dish, 90 mm Single IRR 89.25 x 16.0 20 500 101VR20 Petri dish, 90 mm Triple AS 89.25 x 16.2 20 500 101V/IRR Petri dish, 90 mm Triple IRR 89.25 x 16.2 20 500 101RT Petri dish, 90 mm None AS 89.25 x 15.8 20 500 101RT/IRR Petri dish, 90 mm None IRR 89.25 x 15.8 20 500 Training aids for teaching essential microbiology techniques are detailed on page 36 See Technical Information section;page 91 for information on aseptic manufacture page 90 for information on the BS611 part 2 standard 32 petri dishes Petri Dishes, 90mm, Triple Bagged G Ideal for use in dedicated areas where the sterile transfer of product is essential G In vitro use only G Innermost bag carries an irradiation dot to confirm sterility and batch number to ensure traceability G Batch specific certificate inside each carton Product Description Vents Sterility Base Inner Case Code OD x OH Pack Qty (mm) Qty 101VR05TB Petri dish, 90mm Triple IRR 89.25 x 16.2 5 375 101VR18TB Petri dish, 90mm Triple IRR 89.25 x 16.2 18 450 501VTB Petri dish, 140mm Triple IRR 138.9 x 21.1 9 72 Note that this range is manufactured to order and minimum order quantities apply Please contact our customer service department for details Petri Dishes, 90mm, Coloured G Aids ease of identification, especially suitable for identification of group work within teaching laboratories G Aseptically manufactured under clean room conditions (class 7 ISO14644) to exclude microbiological contamination G Manufactured using cadmium free non-cytotoxic colourants G In vitro use only G Produced and tested in accordance with the BS611 part 2 standard Product Description Colour Vents Sterility Base Inner Case Code OD x OH Pack Qty (mm) Qty 101VAMB Petri dish, 90mm Amber Triple AS 89.25 x 16.2 20 500 101VBLUE Petri dish, 90mm Blue Triple AS 89.25 x 16.2 20 500 101VRED Petri dish, 90mm Red Triple AS 89.25 x 16.2 20 500 Petri Dishes, 90mm, Compartmented G Ideal for use with different media or when savings in media / incubator space are required G Aseptically manufactured under clean room conditions (class 7 ISO14644) to exclude microbiological contamination G CE marked in accordance with the European Directive 98/79/EC G In vitro use only G Manufactured to BS 611 part 2 G Single frosted locator mark where devision meets outer wall Product Description Compartments Vents Sterility Base Inner Case Code OD x OH Pack Qty (mm) Qty 502VF Petri dish, 2 Triple AS 89.25 x 16.2 20 500 90mm 503VF Petri dish, 3 Triple AS 89.25 x 16.2 20 500 90mm 33 petri dishes Petri Dish, 140mm G Ideal for applications where a large surface area and very flat base are required G Easy grip ridges on the base to aid individual dish handling G Aseptically manufactured under clean room conditions (class 7 ISO14644) to exclude microbiological contamination G Produced and tested in accordance with the BS611 part 2 standard, which includes stringent dimensional controls G Ideal for use in automatic plate pourers Product Description Vents Sterility Base Inner Case Code OD x OH Pack Qty (mm) Qty 501V Petri dish, 140mm Triple AS 138.9 x 21.1 10 80 Petri Dishes, 100mm, Square G Non compartmentalised dish is ideal for antibiotic sensitivity testing, when a large surface area and very flat base is required G Compartmentalised dish is ideal for small volume liquid media work or for sample storage - the 25 compartments each have a surface area of 1.8cm2 and capacity of 5ml - the lid features selectable venting or non-venting positions * G Aseptically manufactured under clean room conditions (class 7 ISO14644) to exclude microbiological contamination Product Description Vents Sterility Base Inner Case Code OD x OH Pack Qty (mm) Qty 109 Petri dish, 100mm None AS 101.6 x 21.1 4 120 103 Petri dish, 100mm, * AS 101.0 x 20.8 4 120 25 compartment * Lid turns through 900 to allow for venting or non-venting of the dish 34 petri dishes Petri Dish, 55mm, Contact Plate G Ideal for use in routine hygiene monitoring of surfaces G Concave profile of the dish raises the profile of the media when set giving better contact between the agar bed and surface under test G 25cm2 surface area – conforms to both the Institute of Environmental Sciences (IES, 1993) and the International Pharmaceutical Federation (I.P.F., 1990) Standards G Aseptically manufactured under clean room conditions (class 7 ISO14644) to exclude microbiological contamination G Triple vented – aids gaseous exchange G Numbered grid on the base – facilitates colony counting G Deep skirted base – aids stability when stacked Product Description Vents Sterility Base Inner Case Code OD x OH Pack Qty (mm) Qty 504 Contact Plate, 55mm Triple AS 67 x 10.4 10 300 All Sterilin® petri dishes are also available terminally sterilised by gamma irradiation. Please contact or customer service department for further details For more information about the Sterilin® disposable plastics range visit www.sterilin.co.uk 35 petri dishes Microbiological Training Aid G Invaluable training aid for new entrants into the microbiology laboratory G Ensures consistency and good quality laboratory practice G Consists of two re-usable templates: - Guide-Plate 1 - used to help acheive consistency of volumes of agar poured into Petri dishes - Guide-Plate 2 - ideal for teaching and improving steaking and spreading techniques. - A clear traceable five-point streak pattern enables single colony isolation G Complete with comprehensive insruction manual G Locating grooves around the rim of the G-Pates secures the Petri dish in place during the procedure Guide-Plate 1 G Manufactured from easy to clean polypropylene Product Description Case Code Qty G-PLATE Guide plates (G-Plate 1, G-Plate 2 and instruction manual) 1 Pack Developed in conjunction with microbiologist Dr Chris Bell Only suitable for use with Sterilin 90mm Petri dishes Guide-Plate 2 36.
Load more

Recommended publications
  • Microbiology Laboratory Exercises Third Edition 2020
    MICROBIOLOGY Laboratory Exercises Third Edition Keddis & Rauschenbach 2020 Photo Credits (in order of contribution): Diane Davis, Ines Rauschenbach & Ramaydalis Keddis Acknowledgements: Many thanks to those in the Department of Biochemistry and Microbiology, Rutgers University, who have through the years inspired our enthusiasm for the science and teaching of microbiology, with special thanks to Diane Davis, Douglas Eveleigh and Max Häggblom. Safety: The experiments included in this manual have been deemed safe by the authors when all necessary safety precautions are met. The authors recommend maintaining biosafety level 2 in the laboratory setting and using risk level 1 organisms for all exercises. License: This work is licensed under a Creative Commons Attribution- NonCommercial-NoDerivatives 4.0 International License Microbiology Laboratory Exercises Third Edition 2020 Ramaydalis Keddis, Ph.D. Ines Rauschenbach, Ph.D. Department of Biochemistry and Microbiology Rutgers, The State University of New Jersey CONTENTS PAGE Introduction Schedule ii Best Laboratory Practices Iii Working in a Microbiology Laboratory iv Exercises Preparation of a Culture Medium 1 Culturing and Handling Microorganisms 3 Isolation of a Pure Culture 5 Counting Bacterial Populations 8 Controlling Microorganisms 10 Disinfectants 10 Antimicrobial Agents: Susceptibility Testing 12 Hand Washing 14 The Lethal Effects of Ultraviolet Light 15 Selection of Fungi from Air 17 Microscopy 21 Morphology and Staining of Bacteria 26 Microbial Metabolism 30 Enzyme Assay 32 Metabolic
    [Show full text]
  • Page 1 of 27 the Diagram Shows Two Thermometers. the Bulb of Each
    Q1. The diagram shows two thermometers. The bulb of each thermometer is covered with a piece of wet cotton wool. One of the thermometers is placed in the draught from a fan. The graph shows how the temperature of each thermometer changes with time. (a) Which of the graph lines, A or B, shows the temperature of the thermometer placed in the draught? Write the correct answer in the box. Page 1 of 27 Explain, in terms of evaporation, the reason for your answer. ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ (3) (b) A wet towel spread out and hung outside on a day without wind dries faster than an identical wet towel left rolled up in a plastic bag. Explain why. ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ (2) (Total 5 marks) Q2. The picture shows a person taking a hot shower. (a) When a person uses the shower the mirror gets misty. Why? ___________________________________________________________________ ___________________________________________________________________
    [Show full text]
  • Pouring Plates from Prepared Bottled Media
    Pouring Plates from Prepared Bottled Media Primary Hazard Warning Never purchase living specimens without having a disposition strategy in place. When pouring bottles, agar is HOT! Burning can occur. Always handle hot agar bottles with heat-protective gloves. For added protection wear latex or nitrile gloves when working with bacteria, and always wash hands before and after with hot water and soap. Availability Agar is available for purchase year round. Information • Storage: Bottled agar can be stored at room temperature for about six months unless otherwise specified. Never put agar in the freezer. It will cause the agar to breakdown and become unusable. To prevent contamination keep all bottles and Petri dishes sealed until ready to use. • Pouring Plates • Materials Needed: • Draft-free enclosure or Laminar flow hood • 70% isopropyl alcohol • Petri dishes • Microwave or hot water bath or autoclave 1. Melt the agar using one of the following methods: a) Autoclave: Loosen the cap on the agar bottle and autoclave the bottle at 15 psi for five minutes. While wearing heat-protective gloves, carefully remove the hot bottle and let it cool to between 75–55°C before pouring. This takes approximately 15 minutes. b)Water Bath: Loosen the cap on the agar bottle and place it into a water bath. Water temperature should remain at around 100°C. Leave it in the water bath until the agar is completely melted. While wearing heat- protective gloves, carefully remove the hot bottle and let it cool to between 75–55°C before pouring. c) Microwave: Loosen the cap on the agar bottle before microwaving.
    [Show full text]
  • Microlab® STAR™
    Microlab ® STAR™ Microlab ® STAR ™ AUTOMATED WORKFLOW SOLUTIONS CENTERED AROUND YOUR ASSAY The STAR combines Hamilton's patented pipetting technology including precise lock-and-key tip attachment, unrivaled liquid level detection, and comprehensive volume ranges to create flexible liquid handling workstations. Available in three base platform sizes, the STAR portfolio incorporates countless options to automate your workflows. Hamilton Robotics has also partnered with top leaders in the biotechnology industry to provide Standard Solutions based on commonly automated applications. Offering ready-to-start protocols for a variety of applications such as NGS, ELISA, and forensic assays, our Standard Solutions provide a faster way to automate your processes. 2 1 PATENTED TECHNOLOGY The STAR utilizes Hamilton’s proprietary Compressed O-Ring Expansion (CO-RE®) technology. CO-RE minimizes the production of aerosols and allows disposable tips or washable, steel needles to be used on channels in the same run. 2 MULTI-FUNCTIONAL ARM Our technology offers high pipetting accuracy and precision, from sub-microliter to large volumes, using Independent Channels and/or the Multi-Probe Head (MPH). Labware transportation is possible with the iSWAP® or CO-RE Grippers. The STAR can incorporate a camera, tube transportation, and other channel tools on a single arm. Comprehensive pipetting range: ■■■0.5 μL to 1 mL using the 1 mL Independent Channel ■■■50 μL to 5 mL using the 5 mL Independent Channel ■■■1 μL to 1 mL using the CO-RE 96 MPH ■■■0.1 μL to 50 μL using the CO-RE 384 MPH 3 FLEXIBLE SETUP The high-capacity deck is customized specific to your workflow, accommodating a wide range of labware and automated devices that can easily be exchanged to support multiple assays on one platform.
    [Show full text]
  • Evobot: an Open-Source, Modular, Liquid Handling Robot for Scientific Experiments
    applied sciences Article EvoBot: An Open-Source, Modular, Liquid Handling Robot for Scientific Experiments Andres Faiña 1,* , Brian Nejati 2 and Kasper Stoy 1 1 Robots, Evolution and Art Lab (REAL), Department of Computer Science, IT University of Copenhagen, 2300 Copenhagen, Denmark; [email protected] 2 Department of Mechanical and Industrial Engineering, University of Toronto, Toronto, ON M5S 1A1, Canada; His work was carried out while he was employed at ITU; [email protected] * Correspondence: [email protected]; Tel.: +45-7218-5258 Received: 13 October 2019; Accepted: 17 January 2020; Published: 23 January 2020 Featured Application: Our modular liquid handling robot can be applied to automate scientific experiments in research labs, where tasks change often, and to carry out new kinds of experiments that cannot be done manually. Abstract: Commercial liquid handling robots are rarely appropriate when tasks change often, which is the case in the early stages of biochemical research. In order to address it, we have developed EvoBot, a liquid handling robot, which is open-source and employs a modular design. The combination of an open-source and a modular design is particularly powerful because functionality is divided into modules with simple, well-defined interfaces, hence customisation of modules is possible without detailed knowledge of the entire system. Furthermore, the modular design allows end-users to only produce and assemble the modules that are relevant for their specific application. Hence, time and money are not wasted on functionality that is not needed. Finally, modules can easily be reused. In this paper, we describe the EvoBot modular design and through scientific experiments such as basic liquid handling, nurturing of microbial fuel cells, and droplet chemotaxis experiments document how functionality is increased one module at a time with a significant amount of reuse.
    [Show full text]
  • Process Skills Review Warm-Up C
    Process Skills Review Warm-Up C. • Define function • Match the following 1. Puts out fire 2. Curved line of liquid in a graduated cylinder 3. Used to observe insects A. B. Which of the following describes the correct way to handle chemicals in a laboratory? A. It is safe to combine unknown chemicals as long as only small amounts are used. B. Return all chemicals to their original containers. C. Always pour extra amounts of the chemicals called for the experiment. D. To test for odors, always use a wafting motion. Which of the following describes the correct way to handle chemicals in a laboratory? A. It is safe to combine unknown chemicals as long as only small amounts are used. B. Return all chemicals to their original containers. C. Always pour extra amounts of the chemicals called for the experiment. D. To test for odors, always use a wafting motion. What task is being performed in the picture? A. measuring mass with a graduated cylinder B. measuring length with a triple beam balance C. measuring mass with a triple beam balance D. measuring length with a metric ruler What task is being performed in the picture? A. measuring mass with a graduated cylinder B. measuring length with a triple beam balance C. measuring mass with a triple beam balance D. measuring length with a metric ruler John and Lisa are conducting an experiment in their 7th grade science class in which they are handling potentially dangerous chemicals. As John is pouring a chemical from a beaker to a graduated cylinder, he splashes some of the chemical into his eyes.
    [Show full text]
  • STERILE TECHNIQUE PRACTICE Module 3 Supplement
    STUDENT STERILE TECHNIQUE PRACTICE Module 3 Supplement ONLY FOR PRACTICE you should Re-use the loop and pipette and re-use their "sterile" wrappings Do not dispose of a culture dish even if you accidentally contaminate it. If you were really doing a lab with bacteria you would • Never reuse any loop or pipette. • Always dispose of used loops and pipettes in the "biological trash beaker." • Throw away any culture dish or other item that is accidentally contaminated, and ask for a replacement. • Wash hands immediately if they contact any liquids containing bacteria. Each member of the team should practice each of the following: 1. Open, hold, and close a sterile 15 ml culture tube. 2. Open and close a sterile 1.5 ml test tube. 3. Open a culture dish, observe it without breathing on it, and close it. After each team member has practiced 1-3, use (practice) sterile technique as you 4. Transfer 250 l of liquid from the 1.5 ml test tube to the culture tube. 5. Pretend to transfer a colony from the surface of the culture dish to the liquid in the culture tube. 6. Use the pipette to suspend the imaginary bacteria in the culture tube liquid. After each team member has practiced 4-6, use (practice) sterile technique as you 7. Transfer 100 l of culture tube contents to culture dish and spread it. POSSIBLE SEQUENCE OF STEPS FOR STERILE TECHNIQUE DEMONSTRATION/PRACTICE Delete parts as time requires 1. a. Teacher demonstrates opening/holding/closing of sterile 1.5 ml test tube, sterile 15 ml culture tube, sterile pipettes, measuring with pipettes.
    [Show full text]
  • The Petri Dish Attack - Guessing Secrets Based on Bacterial Growth
    Poster: The Petri Dish Attack - Guessing Secrets Based on Bacterial Growth Katharina Krombholz Adrian Dabrowski Peter Purgathofer Edgar Weippl SBA Research SBA Research TU Wien SBA Research [email protected] [email protected] [email protected] [email protected] Abstract—PINs and unlock patterns remain by far the most common knowledge-based authentication methods on mobile devices. Biometric authentication methods such as fingerprints also rely on PINs and unlock patterns as fallback methods. In recent years, several attacks on knowledge-based mobile authentication have been presented, e.g., shoulder-surfing [1], smudge attacks [2] and thermal attacks [3]. In this poster, we present the Petri dish attack, a novel attack to guess secrets based on bacterial growth. We conducted a series of lab experiments with 20 Petri dishes to evaluate the feasibility of this new attack and unfortunately were not able to successfully conduct the attack on off-the-shelf smartphones. However, we still believe that our results are valuable to the scientific community and provide a baseline to explore future cross- domain attack vectors and interdisciplinary approaches on smartphone security. Figure 1. The study setup. 1. Concept and Threat Model 2. Lab Study To evaluate the feasibility of the Petri dish attack, we In recent years, several attack scenarios based on human conducted a series of experiments at the Max Perutz Labo- traces left on smartphone touchscreens have been presented, ratories in Vienna. We used 20 Petri dishes with a previously e.g., smudge attacks [2] and thermal attacks [3]. The com- prepared fertile soil optimized for E.coli bacteria which is mon threat model behind these attacks is that the user leaves one of the most commonly found type of bacteria on human their smartphone unattended after a successful authenti- hands and hence often left on surfaces that we frequently cation session.
    [Show full text]
  • Laboratory Equipment Used in Filtration
    KNOW YOUR LAB EQUIPMENTS Test tube A test tube, also known as a sample tube, is a common piece of laboratory glassware consisting of a finger-like length of glass or clear plastic tubing, open at the top and closed at the bottom. Beakers Beakers are used as containers. They are available in a variety of sizes. Although they often possess volume markings, these are only rough estimates of the liquid volume. The markings are not necessarily accurate. Erlenmeyer flask Erlenmeyer flasks are often used as reaction vessels, particularly in titrations. As with beakers, the volume markings should not be considered accurate. Volumetric flask Volumetric flasks are used to measure and store solutions with a high degree of accuracy. These flasks generally possess a marking near the top that indicates the level at which the volume of the liquid is equal to the volume written on the outside of the flask. These devices are often used when solutions containing dissolved solids of known concentration are needed. Graduated cylinder Graduated cylinders are used to transfer liquids with a moderate degree of accuracy. Pipette Pipettes are used for transferring liquids with a fixed volume and quantity of liquid must be known to a high degree of accuracy. Graduated pipette These Pipettes are calibrated in the factory to release the desired quantity of liquid. Disposable pipette Disposable transfer. These Pipettes are made of plastic and are useful for transferring liquids dropwise. Burette Burettes are devices used typically in analytical, quantitative chemistry applications for measuring liquid solution. Differing from a pipette since the sample quantity delivered is changeable, graduated Burettes are used heavily in titration experiments.
    [Show full text]
  • Quantitative Method for Evaluating Bactericidal and Mycobactericidal Activity of Microbicides Used on Hard, Non-Porous Surfaces
    US Environmental Protection Agency Office of Pesticide Programs Office of Pesticide Programs Microbiology Laboratory Environmental Science Center, Ft. Meade, MD Standard Operating Procedure for OECD Quantitative Method for Evaluating Bactericidal and Mycobactericidal Activity of Microbicides Used on Hard, Non-Porous Surfaces SOP Number: MB-25-04 Date Revised: 12-04-17 SOP No. MB-25-04 Date Revised 12-04-17 Page 1 of 26 SOP Number MB-25-04 Title OECD Quantitative Method for Evaluating Bactericidal and Mycobactericidal Activity of Microbicides Used on Hard, Non- Porous Surfaces Scope The method provides a quantitative assessment of the performance of liquid antimicrobial substances against Pseudomonas aeruginosa, Salmonella enterica, Staphylococcus aureus, and Mycobacterium terrae designed for use on hard, non-porous surfaces. This method is based on an Organization for Economic Co-operation and Development (OECD) Guidance Document, dated June 21, 2013 (see ref. 15.1); however, the SOP contains revisions based on information and data collected by the EPA since 2013. Application This method provides log reduction (LR) as the quantitative measure of efficacy for liquid disinfectants against the test microbes on a hard non-porous surface. Approval Date SOP Developer: _____________________________________________ Print Name: ___________________________________ SOP Reviewer _____________________________________________ Print Name: ___________________________________ Quality Assurance Unit _____________________________________________ Print Name: ___________________________________ Branch Chief _____________________________________________ Print Name: ___________________________________ Data SOP issued: Controlled copy number: Date SOP withdrawn: SOP No. MB-25-04 Date Revised 12-04-17 Page 2 of 26 TABLE OF CONTENTS Contents Page Number 1. DEFINITIONS 3 2. HEALTH AND SAFETY 3 3. PERSONNEL QUALIFICATIONS AND TRAINING 3 4. INSTRUMENT CALIBRATION 3 5.
    [Show full text]
  • What's in Your Petri
    Ages: 10-14 Topic: Bacteria, Scientific Method, Classifying, Sampling Time: 2 class days Standards Mission X: Train Like an Astronaut Next Generation Science Standards: 5-LS2-1 Develop a model to describe the movement of matter among plants, animals, decomposers, and the What's in your Petri environment Common Core State Standards: MP.4 Model with BUGS IN SPACE PART 2 mathematics EDUCATOR SECTION (PAGES 1-12) STUDENT SECTION (PAGES 13-21) Background Microbes live everywhere! While many microbes on Earth are harmless, and can even be helpful to humans, some microbes can be unsafe. Microbes belong to a group all by themselves because they are neither plants nor animals. Because they can multiply extremely quickly, it is normal to find millions of them in the same location. Some microbes or “germs”, such as bacteria and mold, can grow on food, dirty clothes, and garbage that people produce. Microbes live on your skin, in your Astronaut Chris Hadfield taking microbe samples on the ISS. mouth, nose, hair, and inside your body. Microbes can also be found aboard the International Space Station (ISS). NASA scientists have reported that some germs on the ISS have different characteristics when grown in space compared to when they grow on Earth. The safety of the crew is of utmost importance. Therefore, cleanliness and proper disposal of garbage is an important part of living on the ISS. Scientists who study microbes are called microbiologists and microbiology is the study of microorganisms or microbes. The root word “micro” comes from Greek and means “small”. These microbes are so small that powerful microscopes are needed to be able to see them.
    [Show full text]
  • Pure Culture Techniques
    Microbiology BIOL 275 PURE CULTURE TECHNIQUES I. OBJECTIVES • To demonstrate good aseptic technique in culture transfer or inoculation and in handling sterile materials. • To demonstrate skill in isolation of organisms from a mixed culture using selective and differential media. • To isolate microorganisms from a wide variety of sources and describe their colonial morphology. II. INTRODUCTION Most environments carry a mixed microbial population. To fully appreciate the contribution of each group of organisms to the ecology of the mass, one must first dissect this mixed culture to obtain single colonies. The single colony is transferred (picked) to a fresh medium to obtain a larger, homogeneous culture that may be studied and characterized by a variety of techniques. One such technique is called aseptic technique. Microbiologists and health workers use this technique to prevent contamination of cultures from outside sources and to prevent the introduction of potential disease agents into the human body (infection can occur through contamination of your hands and clothing with material from your bacterial cultures). Aseptic Techniques Aseptic techniques (also called sterile techniques) are defined as the processes required for transferring a culture from one vessel to another without introducing any additional organisms to the culture or contaminating the environment with the culture. The following conditions must exist for aseptic technique to be successful: 1. The work area must be wiped with an antiseptic to reduce the number of potential contaminants. 2. The transfer instruments must be sterile. 3. The work must be accomplished quickly and efficiently to minimize the time of exposure during which contamination of the culture or laboratory worker can occur.
    [Show full text]