Countersinking Tools \ Overview Page for Countersinking Tools Conical

Countersinking tools \ Overview page for countersinking tools

conical countersink 90° solid carbide

application: for 90° screw head countersinking or deburring holes.

advantage: . very wide range . many sha� designs and shapes . very long service life through high-quality solid carbide cutting material

90° VHM

P 700 P 1000 P 1300 H 2 2 2 M N K S H page N/mm N/mm N/mm 65HRC Conical countersink, 90°, solid carbide, triple cutter, 11501705-724 extremely uneven pitch 122 For universal use up to 60 HRC Conical countersink 90° solid carbide, three-edge 122-123 11500230-285 For universal use up to 1300 N/mm2 Conical countersink, 90°, solid carbide, multi-fl ute 123-124 11535 cutter For universal use up to 60 HRC

Conical countersink, 90°, solid carbide, multi-fl ute 124 11536 cutter For universal use up to 60 HRC

conical countersink 90° HSS / HSSE

application: for 90° screw head countersinking or deburring holes.

advantage: . very wide range . many cutting materials available . many sha� designs and shapes

90° HSS HSSE

P 700 P 1000 P 1300 H 2 2 2 M N K S H page N/mm N/mm N/mm 65HRC Conical countersink 90° HSS, three-edge For 124-125 11500006-138 universal use up to 1000 N/mm2 Conical countersink 90° HSS-TiNAlOX, three-edge 124-125 11500601-648 For universal use up to 1000 N/mm2 90° conical countersink, HSS, triple cutter for 124-125 11501006-138 universal use up to 1000 N/mm2 Conical countersink, 90°, HSSE-TiN, triple cutter for 124-125 11501146-218 universal use up to 1000 N/mm2 Conical countersink, 90°, HSSE-TiN, triple cutter for 124-125 11501800-825 universal use up to 1000 N/mm2 Conical countersink, 90°, HSS TiALN, triple-edge 124-125 11501826-853 cutter For universal use up to 1000 N/mm2 Conical countersink, 90°, HSS, triple cutter, 11501637-661 extremely uneven pitch 126 for universal use up to 1000 N/mm2

Source: Hahn+Kolb Werkzeuge GmbH 118 Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

0118_EN_2018_KERN[21846791]-h.indd 118 12/17/2018 3:31:09 PM Countersinking tools \ Overview page for countersinking tools

P 700 P 1000 P 1300 H 2 2 2 M N K S H page N/mm N/mm N/mm 65HRC 90° conical countersink, HSSE, triple cutter for 127 11500698-750 universal use up to 1300 N/mm2

90° conical countersink HSS triple cutter with 127 11501506-561 3-edge shank for universal use up to 1000 N/mm2 90° conical countersink, HSS, triple cutter, ex- 128 11501300-455 tra-long for universal use up to 1000 N/mm2 Conical countersink, 90°, HSS, with bit holder For 128-129 11492 universal use up to 1000 N/mm2

Conical countersink, 90°, HSSE, multi-flute cutter 129 11531 For universal use up to 1300 N/mm2

Conical countersink, 90°, HSSE-TiN, single-bladed 132 11516010-050 cutter for universal use up to 1300 N/mm2 Conical countersink, 90°, HSSE, extra-long single 133 11515210-230 flute cutter For universal use up to 1300 N/mm2

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 119 Availability subject to country specific rules and regulations.

0118_EN_2018_KERN[21846791]-h.indd 119 12/17/2018 3:31:10 PM Countersinking tools \ Overview page for countersinking tools

conical countersink 60° solid carbide

application: for 60° screw head countersinking or deburring holes.

advantage: . very wide range . many sha� designs and shapes . very long service life through high-quality solid carbide cutting material

60° VHM

P 700 P 1000 P 1300 H 2 2 2 M N K S H page N/mm N/mm N/mm 65HRC Conical countersink 60° solid carbide, three-edge 133 11498308-325 For universal use up to 1300 N/mm2 60° conical countersink, HSS, triple cutter for 136 11498226-263 universal use up to 1000 N/mm2

conical countersink 60° HSS / HSSE

application: for 60° screw head countersinking or deburring holes.

advantage: . very wide range . many cutting materials available . many sha� designs and shapes

60° HSS HSSE

P 700 P 1000 P 1300 H 2 2 2 M N K S H N/mm N/mm N/mm 65HRC page Conical countersink 60° HSS-TiN, three-edge For 134 11498206-225 universal use up to 1000 N/mm2 Conical countersink, 60°, HSS, multi-ﬂ ute cutter 135 11495308-320 For universal use up to 1000 N/mm2 Conical countersink, 60°, HSS, multi-ﬂ ute cutter 135-136 11495330-360 For universal use up to 1000 N/mm2 60° conical countersink, HSS, triple cutter for 136 11498226-263 universal use up to 1000 N/mm2 Conical countersink, 60°, HSSE, single-bladed cutter 136 11497405-430 For universal use up to 1300 N/mm2

Source: Hahn+Kolb Werkzeuge GmbH 120 Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

0120_EN_2018_KERN[21846794]-u.indd 120 12/17/2018 3:31:06 PM Countersinking tools \ Overview page for countersinking tools

conical countersink HSS 75°

application: for 75° screw head countersinking or deburring holes.

75° HSS

P 700 P 1000 P 1300 H N/mm2 N/mm2 N/mm2 M N K S H 65HRC page Conical countersink 75° HSS, three-edge For 137 11499008-025 universal use up to 1000 N/mm2

conical countersink HSS 120°

application: for 120° screw head countersinking or deburring holes.

120° HSS

P 700 P 1000 P 1300 H N/mm2 N/mm2 N/mm2 M N K S H 65HRC page 120° conical countersink, HSS, triple cutter for 137-138 11502106-126 universal use up to 1000 N/mm2

Conical countersink 120° HSS, three-edge For 138 11502231-250 universal use up to 1000 N/mm2

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 121 Availability subject to country specific rules and regulations.

0120_EN_2018_KERN[21846794]-u.indd 121 12/17/2018 3:31:07 PM Countersinking tools \ SC conical countersink 90°

conical countersink 90° solid carbide

application: for 90° screw head countersinking or deburring holes.

advantage: . very wide range . many sha designs and shapes . very long service life through high-quality solid carbide cutting material

90° VHM

SC 90° conical countersink, three ﬂ utes, extremely uneven pitch For universal use up to 60 HRC

/ HA VHM TiN Z ZrN 3 Application: Advantage: For producing 90° counterbores . Solid carbide cutting material for high service life requirements . Uneven pitch ensures excellent surfaces without chatter marks and minimisa- Execution: tion of cutting forces . proﬁ le-ground triple-edge countersink with radial relief . radial relief ensures optimum chip breaking

1 2

Argument no. 3: Optimised sinking Extremely variable pitch ① Standard countersink ② EUC speed

Surface TiN/ZrN f steel 1300  (mm/U) 11501... Ident. No. mm mm mm mm 6.3 1.5 5 45 0.06 705 ● 8.3 2 6 50 0.08 709 ● 10.4 2.5 6 50 0.08 712 ● 12.4 2.8 8 56 0.08 714 ● 16.5 3.2 10 60 0.10 717 ● 20.5 3.5 10 63 0.14 719 ● 25 3.8 10 67 0.18 721 ● 31 4.2 12 71 0.18 724 ● Prod. Gr. 114

Solid carbide 90° conical countersink, three-ﬂ ute cutter for universal use up to 1300 N/mm2

HA VHM Z 3 Application: Advantage: For producing 90° counterbores up to 1300 N/mm2. . radial relief ensures optimum chip breaking . solid carbide cutting material for high service life Execution: requirements . proﬁ le-ground triple-edge countersink with radial relief Notes: Diameter 6-8.3 mm = solid carbide Diameter 10-31 mm = solid carbide head and steel shank

Source: Hahn+Kolb Werkzeuge GmbH 122 Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

0122_EN_2018_KERN[21846797]-l.indd 122 12/17/2018 3:31:06 PM Countersinking tools \ SC conical countersink 90°

Surface Uncoated f steel 1300  (mm/U) 11500... Ident. No. mm mm mm mm 6 2.0 5 40 0.06 230 ● 6.3 2.0 5 40 0.06 233 ● 8 2 6 45 0.06 235 ● 8.3 2 6 45 0.08 237 ● 10 2.5 8 46 0.08 240 ● 10.4 2.5 8 46 0.09 242 ● 11.5 2.8 8 56 0.1 245 ● 12.4 2.8 8 56 0.1 250 ● 15 3.2 10 60 0.12 255 ● 16.5 3.2 10 60 0.12 260 ● 20.5 3.5 10 63 0.13 270 ● 25 3.8 10 67 0.14 280 ● 31 4.2 12 71 0.16 285 ● Prod. Gr. 114 Solid carbide 90° conical countersink, three-ﬂ ute cutter for universal use up to 1300 N/mm2

HA VHM Z 3 Application: Advantage: For producing 90° counterbores up to 1000 N/mm2. . precision grinding for high dimensional accuracy requirements Execution: . Solid carbide cutting material for high service life . proﬁ le-ground three-edge countersink with requirements straight cutting edge

Surface Uncoated f steel 1300  (mm/U) 11500... Ident. No. mm mm mm mm 6 1.5 6 45 0.06 231 ● 6.3 1.5 6 45 0.06 234 ● 8 2 6 50 0.08 236 ● 8.3 2 6 50 0.08 238 ● 10 2.5 6 50 0.09 241 ● 10.4 2.5 6 50 0.09 243 ● 11.5 2.8 8 56 0.1 246 ● 12.4 2.8 8 56 0.1 251 ● 15 3.2 10 60 0.12 256 ● 16.5 3.2 10 60 0.12 261 ● 20.5 3.5 10 63 0.13 271 ● 25 3.8 10 67 0.14 281 ● 31 4.2 12 71 0.16 286 ● Prod. Gr. 103 Conical countersink, 90°, solid carbide, multi-ﬂ ute cutter For universal use up to 63 HRC

HA HM Z Z 4 5 Application: Advantage: For countersinking 90° in the material groups steel, . excellent service life characteristics in Hardox 400 stainless steel, (non-ferrous metals), (cast materials) and 500, Creusabro, Inconel, Nimonic, Hastelloy, and special alloys up to a strength of 63 HRC. Monel, manganese-hardened steel, hardened steels up to 60 HRC, titanium and titanium alloy Execution: materials . proﬁ le-ground multi-edge countersink with radial . innovative and patented cutter geometry with a relief large number of cutters ensures excellent cutting performance and good surface qualities

Number of cutting f steel 1300  (mm/U) 11535... edges (PCS) Ident. No. mm mm mm mm 10.4 4 46 8 4 0.04 104 ● 12.4 4 56 8 5 0.05 124 ● 16.5 4.5 60 10 5 0.06 165 ● 20.5 5 63 10 5 0.08 205 ● 25 5.5 67 10 5 0.09 250 ● 31 6 71 12 5 0.1 310 ● Prod. Gr. 114

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 123 Availability subject to country specific rules and regulations.

0122_EN_2018_KERN[21846797]-l.indd 123 12/17/2018 3:31:08 PM Countersinking tools \ SC conical countersink 90°

Solid carbide 90° conical countersink, multi-ﬂ ute cutter For universal use up to 60 HRC

MK HM Z 5 Application: Advantage: For producing 90° counterbores up to 60 HRC. . excellent service life characteristics in Hardox 400 and 500, Creusabro, Inconel, Nimonic, Hastelloy, Execution: Monel, manganese-hardened steel, hardened . proﬁ le-ground triple-edge countersink with steels up to 60 HRC, titanium and titanium alloy patented grind materials . innovative and patented cutter geometry with a large number of cutters ensures excellent cutting performance and good surface qualities

Number of f steel 11536... cutting edges 1300  Ident. No. (PCS) (mm/U) mm mm mm 31 6 108 MK 2 5 0.1 310 ● 40 14 137 MK 3 5 0.12 400 ● 50 18 147 MK 3 5 0.14 500 ● Prod. Gr. 114

conical countersink 90° HSS / HSSE

application: for 90° screw head countersinking or deburring holes.

advantage: . very wide range . many cutting materials available . many sha designs and shapes 90° HSS HSSE

HSS 90° conical countersinks ( DIN 335 ) For universal use

HA HSS TiNAlOX TiN TiAlN Z 3 Application: Advantage: For producing 90° counterbores up to 1000 N/mm2. . radial relief ensures optimum chip breaking . No. 11500 601–11500 648: TiNAlOX coating for increased service life Execution: requirements . proﬁ le-ground triple-edge countersink with radial relief . No. 11501 826–11501 853: TiAlN coating for increased service life requirements

No. 11500 006–11500 138, 11501 No. 11500 601–11500 648 No. 11501 146–11501 825 No. 11501 826–11501 853 006–11501 138 HSS TiNALOX HSS-TiN HSS

Source: Hahn+Kolb Werkzeuge GmbH 124 Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

0122_EN_2018_KERN[21846797]-l.indd 124 12/17/2018 3:31:11 PM Countersinking tools \ HSS/HSSE conical countersink 90°

Surface Uncoated TiNALOX Uncoated TiN TiN TiAlN f steel 11500... 11500... 11501... 11501... 11501... 11501... 700  Ident. No. Ident. No. Ident. No. Ident. No. Ident. No. Ident. No. (mm/U) mm mm mm mm 4.3 1.3 4 40 0.06 006 ● 601 ● 006 ● 146 ● 800 ● 826 ● 5 1.5 4 40 0.07 011 ● 602 ● 011 ● 151 ● 801 ● 827 ● 5.3 1.5 4 40 0.07 013 ● 604 ● 013 ● 153 ● 802 ● 828 ● 5.8 1.5 5 45 0.08 016 ● 606 ● 016 ● 155 ● 803 ● 829 ● 6 1.5 5 45 0.08 021 ● 608 ● 021 ● 157 ● 804 ● 830 ● 6.3 1.5 5 45 0.08 026 ● 611 ● 026 ● 161 ● 805 ● 831 ● 7 1.8 6 50 0.09 031 ● 612 ● 031 ● 163 ● 806 ● 832 ● 7.3 1.8 6 50 0.09 036 ● 614 ● 036 ● 165 ● 807 ● 833 ● 8 2 6 50 0.1 041 ● 616 ● 041 ● 167 ● 808 ● 834 ● 8.3 2 6 50 0.1 046 ● 618 ● 046 ● 171 ● 809 ● 835 ● 9.4 2.2 6 50 0.11 048 ● 621 ● 048 ● 173 ● 810 ● 836 ● 10 2.5 6 50 0.12 051 ● 622 ● 051 ● 168 ● 811 ● 837 ● 10.4 2.5 6 50 0.12 056 ● 624 ● 056 ● 177 ● 812 ● 838 ● 11.5 2.8 8 56 0.13 061 ● 626 ● 061 ● 179 ● 813 ● 839 ● 12.4 2.8 8 56 0.13 071 ● 628 ● 071 ● 181 ● 814 ● 841 ● 13.4 2.9 8 56 0.13 076 ● 631 ● 076 ● 186 ● 815 ● 842 ● 15 3.2 10 60 0.14 081 ● 632 ● 081 ● 191 ● 816 ● 843 ● 16.5 3.2 10 60 0.14 096 ● 634 ● 096 ● 196 ● 817 ● 844 ● 19 3.5 10 63 0.15 101 ● 636 ● 101 ● 198 ● 818 ● 846 ● 20.5 3.5 10 63 0.16 114 ● 638 ● 114 ● 201 ● 819 ● 847 ● 23 3.8 10 67 0.17 121 ● 640 ● 121 ● 206 ● 820 ● 848 ● 25 3.8 10 67 0.18 131 ● 642 ● 131 ● 211 ● 821 ● 849 ● 28 4 12 71 0.19 132 ● 644 ● 136 ● 216 ● 822 ● 851 ● 30 4.2 12 71 0.2 136 ● 646 ● 137 ● 217 ● 823 ● 852 ● 31 4.2 12 71 0.21 138 ● 648 ● 138 ● 218 ● 824 ● 853 ● 40 10 12 75 0.25 ------825 ● - - a = Prod. Gr. 1EB ORION = Prod. Gr. 1EH

HSS/HSSE 90° conical countersink sets ( DIN 335 ) For universal use

HA HSS HSSE TiN TiNAlOX Z 3 Application: Advantage: Ident. No. 010–620: For producing 90° counter- . radial relief ensures optimum chip breaking 2 bores up to 1000 N/mm . . Ident. No. 480, 490, 500, 510, 520, 530: TiN Ident. No. 700–720: For producing 90° counter- coating for increased service life requirements 2 bores up to 1300 N/mm . . Ident. No. 600–620: TiNAlOX coating for increased requirements in service life Execution: . proﬁ le-ground triple-edge countersink with radial relief

Cutting material HSS HSS HSS HSS HSS HSSE Surface Uncoated Uncoated TiN TiN TiNALOX Uncoated Composition of set Number of pieces in assort- 11507... 11507... 11507... 11507... 11507... 11507... ment/set (PCS) Ident. No. Ident. No. Ident. No. Ident. No. Ident. No. Ident. No. 8/10/11.5/15 4 010 ● 015 ● 480 ● 485 ● - - - - 10.4/16.5/20.5/25 4 020 ● 025 ● 490 ● 495 ● - - - - 6/8/10/11.5/15/19 6 031 ● 035 ● 500 ● 505 ● 600 ● 700 ● 6/8/10/11.5/15/19/25 7 041 ● 045 ● 510 ● 515 ● - - - - 6.3/8.3/10.4/12.4/16.5/20.5 6 051 ● 055 ● 520 ● 525 ● 620 ● 720 ● 6.3/8.3/10.4/12.4/16.5/20.5/25 7 061 ● 065 ● 530 ● 535 ● - - - - a = Prod. Gr. 1EB ORION = Prod. Gr. 1EH

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 125 Availability subject to country specific rules and regulations.

0122_EN_2018_KERN[21846797]-l.indd 125 12/17/2018 3:31:13 PM Countersinking tools \ HSS/HSSE conical countersink 90°

HSS 90° conical countersink set ( DIN 335 ) For universal use

HA HSS TiN TiNAlOX Z 3 Application: Advantage: For producing 90° counterbores up to 1000 N/mm2. . radial relief ensures optimum chip breaking . Ident. No. 020: TiN coating for increased require- Execution: ments in service life . proﬁ le-ground triple-edge countersink with radial . Ident. No. 030: TiNAlOX coating for increased relief requirements in service life

2 Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat. No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC 11512011 30 20 10 8 40 70 60 50 40 30 30 15 11512015 30 20 10 8 40 70 60 50 40 30 30 15 11512020 30 20 10 8 40 70 60 50 40 30 30 15 11512025 30 20 10 8 40 70 60 50 40 30 30 15 11512030 30 20 10 8 40 70 60 50 40 30 30 15

Cutting material HSS HSS HSS HSS HSS Surface Uncoated Uncoated TiN TiN TiNALOX Composition of set Number of pieces in assortment/ 11512... 11512... 11512... 11512... 11512... set (PCS) Ident. No. Ident. No. Ident. No. Ident. No. Ident. No. 4.3/5.0/6.0/6.3/7.0/8.0/8.3/1 0.0/10.4/11.5/12.4/15.0/16.5/ 17 011 ● 015 ● 020 ● 025 ● 030 ● 19.0/20.5/23.0/25.0 a = Prod. Gr. 1EB ORION = Prod. Gr. 1EH HSS 90° conical countersink, three ﬂ utes, extremely uneven pitch ( DIN 335 ) for universal use up to 1000 N/mm2

/ HA HSS TiN Z ZrN 3 Application: Execution: Advantage: For producing 90° counterbores up to 1000 N/mm2. . proﬁ le-ground triple-edge countersink with radial . radial relief ensures optimum chip breaking relief, with extremely uneven pitch . Uneven pitch ensures excellent surfaces without chatter marks and minimisation of cutting forces

1 2

Argument no. 3: Optimised sinking Extremely variable pitch ① Standard countersink ② EUC speed

Surface TiN/ZrN Surface TiN/ZrN f steel 11501... f steel 11501... 700  Ident. No. 700  Ident. No. (mm/U) (mm/U) mm mm mm mm mm mm mm mm 4.3 1.3 4 40 0.06 637 ● 12.4 2.8 8 56 0.1 651 ● 6 1.5 5 45 0.08 641 ● 15 3.2 10 60 0.12 653 ● 6.3 1.5 5 45 0.08 642 ● 16.5 3.2 10 60 0.12 654 ● 8 2 6 50 0.1 645 ● 19 3.5 10 63 0.14 655 ● 8.3 2 6 50 0.1 646 ● 20.5 3.5 10 63 0.18 656 ● 10 2.5 6 50 0.1 648 ● 23 3.8 10 67 0.18 657 ● 10.4 2.5 6 50 0.1 649 ● 25 3.8 10 67 0.18 658 ● 11.5 2.8 8 56 0.1 650 ● 31 4.2 12 71 0.22 661 ● Prod. Gr. 1EB

Source: Hahn+Kolb Werkzeuge GmbH 126 Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

0126_EN_2018_KERN[21846802]-k.indd 126 12/17/2018 3:31:07 PM Countersinking tools \ HSS/HSSE conical countersink 90°

HSS 90° conical countersink set, three ﬂ utes, extremely uneven pitch ( DIN 335 ) for universal use up to 1000 N/mm2

Cutting material HSS Surface TiN/ZrN Composition of set Number of pieces in assortment/set (PCS) 11501... Ident. No. 6.3/10.4/16.5/20.5/25 5 662 ● Prod. Gr. 1EB HSSE 90° conical countersink, three-ﬂ ute cutter ( DIN 335 ) for universal use up to 1300 N/mm2

HA HSSE Z 3 Application: Advantage: For producing 90° counterbores up to 1300 N/mm2. . radial relief ensures optimum chip breaking Execution: . proﬁ le-ground triple-edge countersink with radial relief

Surface Uncoated Surface Uncoated f steel 11500... f steel 11500... 1000  Ident. No. 1000  Ident. No. (mm/U) (mm/U) mm mm mm mm mm mm mm mm 4.3 1.3 4 40 0.07 698 ● 10.4 2.5 6 50 0.12 722 ● 5 1.5 4 40 0.07 699 ● 11.5 2.8 8 56 0.13 723 ● 5.3 1.5 4 40 0.07 700 ● 12.4 2.8 8 56 0.13 725 ● 6 1.5 5 45 0.08 702 ● 15 3.2 10 60 0.14 730 ● 6.3 1.5 5 45 0.08 705 ● 16.5 3.2 10 60 0.14 735 ● 7 1.8 6 50 0.09 706 ● 19 3.5 10 63 0.15 736 ● 8 2 6 50 0.1 710 ● 20.5 3.5 10 63 0.16 740 ● 8.3 2 6 50 0.1 712 ● 23 3.8 10 67 0.17 741 ● 9.4 2.2 6 50 0.11 715 ● 25 3.8 10 67 0.18 745 ● 10 2.5 6 50 0.12 720 ● 31 4.2 12 71 0.21 750 ● Prod. Gr. 1EB HSS 90° conical countersink, three-ﬂ ute cutter and shank with 3 ﬂ ats for universal use up to 1000 N/mm2

HSS Z 3 Application: Advantage: For producing 90° counterbores up to 1000 N/mm2. . radial relief ensures optimum chip breaking . three-edge shank ensures excellent power trans- Execution: mission in the chuck . proﬁ le-ground triple-edge countersink with three- edge shank with radial relief

Surface Uncoated Surface Uncoated f steel 11501... f steel 11501... 700  Ident. No. 700  Ident. No. (mm/U) (mm/U) mm mm mm mm mm mm mm mm 11.5 2.8 8 56 0.13 506 ● 20.5 3.5 10 63 0.16 536 ● 12.4 2.8 8 56 0.13 511 ● 23 3.8 10 67 0.17 542 ● 13.4 2.9 8 56 0.13 516 ● 25 3.8 10 67 0.18 547 ● 15 3.2 10 60 0.14 521 ● 28 4 12 71 0.19 551 ● 16.5 3.2 10 60 0.14 526 ● 30 4.2 12 71 0.2 556 ● 19 3.5 10 63 0.15 532 ● 31 4.2 12 71 0.21 561 ● Prod. Gr. 1EB

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 127 Availability subject to country specific rules and regulations.

0126_EN_2018_KERN[21846802]-k.indd 127 12/17/2018 3:31:09 PM Countersinking tools \ HSS/HSSE conical countersink 90°

HSS 90° conical countersinks, extra-long for universal use up to 1000 N/mm2

HA HSS Z 3 Application: Advantage: For producing deep-set 90° counterbores up to . Ident. No. 300–445: 1000 N/mm2. . radial relief ensures optimum chip breaking . deep-set countersinks are made easy for the user Execution: . Ident. No. 450–541: . Ident. No. 300–445: proﬁ le-ground extra-long . Radial relief ensures optimum chip breaking triple-edge countersink . Deep-set countersinks are made easy for the . Ident. No. 450–541: Proﬁ le-ground extra-long user triple-edge countersink

2 Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat. No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC 11501300-455 30 20 10 10 40 70 60 50 40 30 30 15 Cutting material HSS Cutting material HSS f steel 11501... f steel 11501... 700  Ident. No. 700  Ident. No. (mm/U) (mm/U) mm mm mm mm mm mm mm mm 5.8 1.5 104 5 0.08 300 ● 15 3.2 109 10 0.14 335 ● 6.3 1.5 104 5 0.08 305 ● 15 3.2 159 10 0.14 435 ● 6.3 1.5 154 5 0.08 405 ● 16.5 3.2 111 10 0.14 340 ● 8.3 2 105 6 0.1 310 ● 16.5 3.2 161 10 0.14 440 ● 8.3 2 155 6 0.1 410 ● 16.5 3.2 261 10 0.14 541 ● 9.4 2.2 106 6 0.11 315 ● 20.5 3.5 114 10 0.16 345 ● 10.4 2.5 107 6 0.12 320 ● 20.5 3.5 164 10 0.16 445 ● 10.4 2.5 157 6 0.12 420 ● 25 3.8 118 10 0.18 350 ● 11.5 2.8 108 6 0.13 325 ● 25 3.8 168 10 0.18 450 ● 12.4 2.8 108 8 0.13 330 ● 31 4.2 140 12 0.21 355 ● 12.4 2.8 158 8 0.13 430 ● 31 4.2 190 12 0.21 455 ● Prod. Gr. 1EB HSSE 90° conical countersink sets, extra-long for universal use up to 1000 N/mm2

HA HSS Z 3 Application: Advantage: For producing deep-set 90° counterbores up to . radial relief ensures optimum chip breaking 2 1000 N/mm . . deep-set countersinks are made easy for the user Execution: . proﬁ le-ground extra-long triple-edge countersink with radial relief Composition of set 6.3/8.3/10.4/12.4/16.5/20.5 6.3/8.3/10.4/12.4/16.5/20.5 Sha length (mm) 100 150 Ident. No. 390 Ident. No. 490 Ident. No. 390 490 11501... ● ● Prod. Gr. 1EB

HSS 90° conical countersink with bit holder for universal use up to 1000 N/mm2

2 Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat. No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC 11492              Suitable for screw thread Spot-facer Ø (mm) Tip Ø (mm) Sha length (mm) Length (mm) 11492... Ident. No. M3 6.3 1.5 20 31 063 ● M4 8.3 2.0 20 31 083 ● M5 10.4 2.5 20 34 104 ● M6 12.4 2.8 20 35 124 ● M8 16.5 3.2 20 40 165 ● M10 20.5 3.5 20 41 205 ● Prod. Gr. 1EH Source: Hahn+Kolb Werkzeuge GmbH 128 Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

0128_EN_2018_KERN[21846805]-d.indd 128 12/17/2018 3:31:06 PM Countersinking tools \ HSS/HSSE conical countersink 90°

HSS 90° conical countersink set with bit holder for universal use up to 1000 N/mm2

HSS Z 3 Application: Execution: For countersinking, chamfering and deburring. For . proﬁ le-ground use in hand-held bit holders, electric hand drills and electric screwdrivers. Advantage: . Hexagonal shank, 1/4” provides a user-friendly tool chuck in the bit holder 1 each of countersink Composition of set 6.3/8.3/10.4/12.4/16.5/20.5 Number of pieces in assortment/set (PCS) 6 Ident. No. 520 11493... ● Prod. Gr. 1EH

Conical countersink, 90°, HSSE, multi-ﬂ ute cutter for universal use up to 1300 N/mm2

HA HSSE Z Z 4 5 Application: Advantage: For producing 90° counterbores up to 1300 N/mm2. . excellent service life for Hardox 400, Creusabro, Inconel, Nimonic, Hastelloy, Monel, titanium and Execution: titanium alloy materials . proﬁ le-ground triple-edge countersink with . radial relief ensures optimum chip breaking patented special grind . innovative cutting geometry with greater number of cutters provides excellent cutting performance and good surface quality

Number of cutting edges 11531... (PCS) Ident. No. mm mm mm mm 10.4 4 50 6 4 104 ● 12.4 4 56 8 5 124 ● 16.5 4.5 60 10 5 165 ● 20.5 5 63 10 5 205 ● 25 5.5 67 10 5 250 ● 31 6 71 12 5 310 ● Prod. Gr. 1EB HSS 90° conical countersink, multi-ﬂ ute cutter ( DIN 335 ) for universal use up to 1000 N/mm2

HA HSS Z 5 Application: Advantage: For producing 90° counterbores up to 1000 N/mm2. . high number of cutting edges for quiet cutting performance Execution: . very good cutting performance and surface quality . proﬁ le-ground multi-edge countersink with straight (chatter-free) cutting edge

Number of f steel 700  11495... cutting edges (mm/U) Ident. No. (PCS) mm mm mm mm 8 1.5 48 8 5 0.1 408 ● 12.5 2 48 8 5 0.13 412 ● 16 3.2 56 10 7 0.14 416 ● 20 5 60 10 7 0.16 420 ● Prod. Gr. 1EB

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 129 Availability subject to country specific rules and regulations.

0128_EN_2018_KERN[21846805]-d.indd 129 12/17/2018 3:31:08 PM Countersinking tools \ HSS/HSSE conical countersink 90°

HSS/HSSE 90° conical countersink, three-way cutter ( DIN 335 ) For universal use

MK HSS HSSE Z 3 Application: Execution: Ident. No. 312–373, 382–393, 402–403, 412–413, . proﬁ le-ground triple-edge countersink with radial 422–423, 432–433, 442–443: For producing 90° relief counterbores up to 1000 N/mm2. Ident. No. 381, 401, 411, 421, 431, 441: For pro- Advantage: ducing 90° counterbores up to 1300 N/mm2. . radial relief ensures optimum chip breaking

Cutting material HSS HSS HSSE f steel 700  11500... 11500... 11500... (mm/U) Ident. No. Ident. No. Ident. No. mm mm mm 15 3.2 85 MK 1 0.14 312 ● - - - - 16.5 3.2 85 MK 1 0.14 322 ● - - - - 20.5 3.5 100 MK 2 0.16 337 ● - - - - 25 3.8 106 MK 2 0.18 352 ● 353 ● - - 28 4 112 MK 2 0.19 367 ● - - - - 30 4.2 112 MK 2 0.2 372 ● 373 ● - - 31 4.2 112 MK 2 0.21 382 ● 383 ● 381 ● 34 4.5 118 MK 2 0.22 392 ● 393 ● - - 37 4.8 118 MK 2 0.24 402 ● 403 ● 401 ● 40 10 140 MK 3 0.25 412 ● 413 ● 411 ● 50 14 150 MK 3 0.28 422 ● 423 ● 421 ● 63 16 180 MK 4 0.33 432 ● 433 ● 431 ● 80 22 190 MK 4 0.33 442 ● 443 ● 441 ● a = Prod. Gr. 1EB ORION = Prod. Gr. 1EH

HSSE 90° conical countersink, multi-ﬂ ute cutter For universal use up to 60 HRC

MK HSSE Z 5 Application: Advantage: For producing 90° counterbores up to 60 HRC. . excellent service life for Hardox 400, Creusabro, Inconel, Nimonic, Hastelloy, Monel, titanium and Execution: titanium alloy materials . proﬁ le-ground multi-edge countersink with radial . innovative and patented cutter geometry with a relief on the cutter large number of cutters ensures excellent cutting performance and good surface qualities

Number of 11532... cutting edges Ident. No. (PCS) mm mm mm 31 6 111 MK 2 5 310 ● 40 10 140 MK 3 5 400 ● Prod. Gr. 1EB

Source: Hahn+Kolb Werkzeuge GmbH 130 Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

0128_EN_2018_KERN[21846805]-d.indd 130 12/17/2018 3:31:10 PM Countersinking tools \ HSS/HSSE conical countersink 90°

HSS 90° conical countersink, multi-ﬂ ute cutter ( DIN 335 ) for universal use up to 1000 N/mm2

MK HSS

Application: Advantage: For producing 90° counterbores up to 1000 N/mm2. . high number of cutting edges for quiet cutting performance Execution: . very good cutting performance and surface quality . proﬁ le-ground multi-edge countersink with straight (chatter-free) cutting edge

Number of cutting f steel 700  (mm/U) 11495... edges (PCS) Ident. No. mm mm mm 25 7 118 MK 2 9 0.18 430 ● 31.5 9 122 MK 2 9 0.21 440 ● 40 12 150 MK 3 11 0.25 450 ● 50 16 155 MK 3 13 0.28 460 ● 63 20 185 MK 4 15 0.33 470 ● Prod. Gr. 1EB

HSSE 90° conical countersink and deburring tool for universal use up to 1000 N/mm2

HA HSSE Z 1 Application: Advantage: For producing 60° counterbores up to 1300 N/mm2. . radial relief ensures optimum chip breaking . deep and wide fl ute provides optimum chip Execution: removal . Ident. No. 605–651: profi le-ground single-edge . Ident. No. 605–651: special geometry ensures countersink with radial relief vibration-free and accurate countersinking with . Ident. No. 905–951: profi le-ground single-edge high fi nish quality countersink

Min./max. cutting f steel 1000  (mm/U) 11497... 11497... edge Ø Ident. No. Ident. No. mm mm mm 5 1-5 mm 5 50 0.07 605 ● 905 ● 10 1-10 mm 10 60 0.12 610 ● 910 ● 15 2-15 mm 10 65 0.14 615 ● 915 ● 20 2-20 mm 10 73 0.16 620 ● 920 ● 25 2-25 mm 10 80 0.18 625 ● 925 ● 30 3-30 mm 12 82 0.2 630 ● 930 ● 40 3-40 mm 15 92 0.25 640 ● 940 ● 40 3-40 mm 12 92 0.25 641 ● 941 ● 50 3-50 mm 15 100 0.28 650 ● 950 ● 50 3-50 mm 12 100 0.30 651 ● 951 ● a = Prod. Gr. 1EB ORION = Prod. Gr. 1EH

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 131 Availability subject to country specific rules and regulations.

0131_EN_2018_KERN[21846809]-i.indd 131 12/17/2018 3:31:04 PM Countersinking tools \ HSS/HSSE conical countersink 90°

HSSE 90° conical countersinks with slanted hole for universal use up to 1300 N/mm2

HA HSSE Z 1 Application: Advantage: For producing 90° counterbores up to 1300 N/mm2. . slanted continuous hole improves chip removal . No. 11516: TiN coating for increased requirements Execution: in service life . proﬁ le-ground single-edge countersink with No. 11515 . No. 11516 010, 11516 020, 11516 030, 11516 HSSE slanted hole 040, 11516 050: precision grinding for the most demanding requirements in terms of dimensional accuracy

No. 11516 HSSE, TiN-coated

Surface Uncoated Uncoated TiN TiN Min./max. f steel 700  11515... 11515... 11516... 11516... cutting edge Ø (mm/U) Ident. No. Ident. No. Ident. No. Ident. No. mm mm mm 10 2-5 mm 6 45 0.12 010 ● 015 ● 010 ● 015 ● 14 5-10 mm 6 56 0.13 020 ● 025 ● 020 ● 025 ● 21 10-15 mm 10 67 0.16 030 ● 035 ● 030 ● 035 ● 28 15-20 mm 12 90 0.19 040 ● 045 ● 040 ● 045 ● 35 20-25 mm 15 106 0.23 050 ● 055 ● 050 ● 055 ● a = Prod. Gr. 1EB ORION = Prod. Gr. 1EH

90° conical countersink set with slanted hole for universal use up to 1300 N/mm2

HA HSSE TiN Z 1 Application: Advantage: For producing 90° counterbores up to 1300 N/mm2. . slanted continuous hole improves chip removal Execution: . proﬁ le-ground single-edge countersink with slanted hole

No. 11517 No. 11518

Surface Uncoated Uncoated TiN TiN Composition Min./max. 11517... 11517... 11518... 11518... of set cutting edge Ø Ident. No. Ident. No. Ident. No. Ident. No. 1 each of countersink 2-20 mm 010 ● 015 ● 010 ● 015 ● 10/14/21/28 a = Prod. Gr. 1EB ORION = Prod. Gr. 1EH

2 Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat. No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC 11517010 30 20 10 8 7 40 70 60 50 40 30 30 15 8 11517015 30 20 10 8 7 40 70 60 50 40 30 30 15 8 11518010 30 20 10 8 7 40 70 60 50 40 30 30 15 8 11518015 30 20 10 8 7 40 70 60 50 40 30 30 15 8

Source: Hahn+Kolb Werkzeuge GmbH 132 Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

0131_EN_2018_KERN[21846809]-i.indd 132 12/17/2018 3:31:08 PM Countersinking tools \ HSS/HSSE conical countersink 90°

HSSE 90° conical countersink, extra long for universal use up to 1300 N/mm2

HA HSSE Z 1 Application: . Ident. No. 310–330: proﬁ le-ground single-edge For producing 90° counterbores up to 1300 N/mm2. countersink with slanted bore, straight shank length 120 mm Ident. No. 210–230 Execution: . Ident. No. 210–230: proﬁ le-ground single-edge Advantage: countersink, straight shank length 60 mm . slanted continuous hole improves chip removal . deep-set countersinks are made easy for the user Ident. No. 310–330

Sha length (mm) 60 120 Min./max. cutting f steel 1000  (mm/U) 11515... 11515... edge Ø Ident. No. Ident. No. mm mm mm 10 2-5 mm 6 76 0.12 210 ● - - 10 2-5 mm 6 136 0.12 - - 310 ● 14 5-10 mm 6 86 0.13 220 ● - - 14 5-10 mm 6 146 0.13 - - 320 ● 21 10-15 mm 10 96 0.16 230 ● - - 21 10-15 mm 10 156 0.16 - - 330 ● Prod. Gr. 1EB

conical countersink 60° solid carbide

application: for 60° screw head countersinking or deburring holes.

advantage: . very wide range . many sha designs and shapes . very long service life through high-quality solid carbide cutting material

60° VHM

Solid carbide 60° conical countersink, three-ﬂ ute cutter ( DIN 334 ) for universal use up to 1300 N/mm2

HA HM Z 3 Application: Advantage: For producing 60° counterbores up to 1300 N/mm2. . radial relief ensures optimum chip breaking Execution: . proﬁ le-ground triple-edge countersink with radial relief

Surface Uncoated f steel 1300  (mm/U) 11498... Ident. No. mm mm mm mm 8 2 6 50 0.08 308 ● 10 2.5 8 50 0.09 310 ● 12.5 3.2 8 56 0.1 312 ● 16 4 10 63 0.12 316 ● 20 5 10 67 0.13 320 ● 25 6.3 10 71 0.14 325 ● Prod. Gr. 114

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 133 Availability subject to country specific rules and regulations.

0133_EN_2018_KERN[21846813]-g.indd 133 12/17/2018 3:30:59 PM Countersinking tools \ SC conical countersink 60°

conical countersink 60° HSS / HSSE

application: for 60° screw head countersinking or deburring holes.

advantage: . very wide range . many cutting materials available . many sha designs and shapes

60° HSS HSSE

HSS 60° conical countersink, three-ﬂ ute cutter ( DIN 334 ) for universal use up to 1000 N/mm2

HA HSS TiN Z 3 Application: . Ident. No. 506–725: proﬁ le-ground triple-edge For producing 60° counterbores up to 1000 N/mm2. countersink with standard relief Ident. No. 106–126, 506–525 Execution: Advantage: . Ident. No. 106–225: proﬁ le-ground triple-edge . radial relief ensures optimum chip breaking countersink with radial relief . Ident. No. 706–725: TiN coating for increased service life requirements

Ident. No. 206–225, 706–725

2 Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat. No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC 11498106-126 30 20 10 8 40 70 60 50 40 30 30 15 11498206-225 30 20 10 8 40 70 60 50 40 30 30 15 11498506-525 30 20 10 8 40 70 60 50 40 30 30 15 11498706-725 30 20 10 8 40 70 60 50 40 30 30 15

Surface Uncoated TiN Uncoated TiN f steel 700  11498... 11498... 11498... 11498... (mm/U) Ident. No. Ident. No. Ident. No. Ident. No. mm mm mm mm 6.3 1.6 5 45 0.08 106 ● 206 ● 506 ● 706 ● 8 2 6 50 0.1 108 ● 208 ● 508 ● 708 ● 10 2.5 6 50 0.12 110 ● 210 ● 510 ● 710 ● 12.5 3.2 8 56 0.13 112 ● 212 ● 512 ● 712 ● 16 4 10 63 0.14 117 ● 216 ● 516 ● 716 ● 20 5 10 67 0.16 121 ● 220 ● 520 ● 720 ● 25 6.3 10 71 0.18 126 ● 225 ● 525 ● 725 ● a = Prod. Gr. 1EB ORION = Prod. Gr. 1EH

Source: Hahn+Kolb Werkzeuge GmbH 134 Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

0133_EN_2018_KERN[21846813]-g.indd 134 12/17/2018 3:31:02 PM Countersinking tools \ HSS/HSSE conical countersink 60°

HSSE 60° conical countersink set, three-ﬂ ute cutter ( DIN 334 ) for universal use up to 1000 N/mm2

HA HSS TiN Z 3 Application: . Ident. No. 905, 915, 925, 935: proﬁ le-ground For producing 60° counterbores up to 1000 N/mm2. triple-edge countersink with standard relief

Execution: Advantage: . Ident. No. 900, 910, 920, 930: proﬁ le-ground . radial relief ensures optimum chip breaking triple-edge countersink with radial relief

Ident. No. 900–905, Ident. No. 910–915, 935 920–925 Cutting material HSS HSS HSS HSS Surface Uncoated Uncoated TiN TiN Composition of set Number of 11498... 11498... 11498... 11498... pieces in Ident. No. Ident. No. Ident. No. Ident. No. assortment/set (PCS) 8.0/10.0/12.5/16.0/20.0 5 900 ● 905 ● 910 ● 915 ● 6.3/8.0/10.0/12.5/16.0/ 20.0/25.0 7 920 ● 925 ● 930 ● 935 ●

a = Prod. Gr. 1EB ORION = Prod. Gr. 1EH

2 Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat. No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC 11498900 30 20 10 8 40 70 60 50 40 30 30 15 11498905 30 20 10 8 40 70 60 50 40 30 30 15 11498910 30 20 10 8 40 70 60 50 40 30 30 15 11498915 30 20 10 8 40 70 60 50 40 30 30 15 11498920 30 20 10 8 40 70 60 50 40 30 30 15 11498925 30 20 10 8 40 70 60 50 40 30 30 15 11498930 30 20 10 8 40 70 60 50 40 30 30 15 11498935 30 20 10 8 40 70 60 50 40 30 30 15

Conical countersink, 60°, HSS, multi-ﬂ ute cutter ( DIN 334 ) for universal use up to 1000 N/mm2

HA HSS Z 5 Application: Advantage: For producing 60° counterbores up to 1000 N/mm2. . high number of cutting edges for quiet cutting performance Execution: . very good cutting performance and surface quality . proﬁ le-ground multi-edge countersink with straight (chatter-free) cutting edge

Number of f steel 700  11495... cutting edges (mm/U) Ident. No. (PCS) mm mm mm mm 8 1.5 50 8 5 0.1 308 ● 12.5 2 50 8 5 0.13 312 ● 16 3.2 60 10 7 0.14 316 ● 20 5 63 10 7 0.16 320 ● Prod. Gr. 1EB

Conical countersink, 60°, HSS, multi-ﬂ ute cutter ( DIN 334 ) for universal use up to 1000 N/mm2

MK HSS

Application: Advantage: For producing 60° counterbores up to 1000 N/mm2. . high number of cutting edges for quiet cutting performance Execution: . very good cutting performance and surface quality . proﬁ le-ground multi-edge countersink with straight (chatter-free) cutting edge

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 135 Availability subject to country specific rules and regulations.

0135_EN_2018_KERN[21846817]-g.indd 135 12/17/2018 3:31:02 PM Countersinking tools \ HSS/HSSE conical countersink 60°

Number of f steel 700  11495... cutting edges (mm/U) Ident. No. (PCS) mm mm mm 25 7 125 MK 2 9 0.18 330 ● 31.5 9 132 MK 2 9 0.21 340 ● 40 12 160 MK 3 11 0.25 350 ● 50 16 170 MK 3 13 0.28 360 ● Prod. Gr. 1EB

HSSE 60° conical countersink, three-ﬂ ute cutter ( DIN 334 ) for universal use up to 1000 N/mm2

MK HSS Z 3 Application: Advantage: For producing 60° counterbores up to 1000 N/mm2. . radial relief ensures optimum chip breaking Execution: . proﬁ le-ground triple-edge countersink with radial relief

Cutting material HSS f steel 700  (mm/U) 11498... Ident. No. mm mm mm 25 6.3 112 MK 2 0.18 226 ● 31.5 10 118 MK 2 0.21 231 ● 40 12.5 150 MK 3 0.25 240 ● 50 16 160 MK 3 0.28 250 ● 63 20 190 MK 4 0.33 263 ● Prod. Gr. 1EB

HSSE 60° conical countersink, single-ﬂ ute cutter for universal use up to 1300 N/mm2

HA HSSE Z 1 Application: Advantage: For producing 60° counterbores up to 1300 N/mm2. . radial relief ensures optimum chip breaking . deep and wide fl ute provides optimum chip Execution: removal . profi le-ground single-edge countersink . Ident. No. 405–430: special geometry ensures vibration-free and accurate countersinking with high fi nish quality

Min./max. cutting f steel 1000  (mm/U) 11497... 11497... edge Ø Ident. No. Ident. No. mm mm mm 5 1-5 mm 5 50 0.07 405 ● 705 ● 10 1-10 mm 10 60 0.12 410 ● 710 ● 15 2-15 mm 10 65 0.14 415 ● 715 ● 20 2-20 mm 10 73 0.16 420 ● 720 ● 25 2-25 mm 10 80 0.16 425 ● - - 30 3-30 mm 12 82 0.2 430 ● 730 ● a = Prod. Gr. 1EB ORION = Prod. Gr. 1EH

Source: Hahn+Kolb Werkzeuge GmbH 136 Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

0135_EN_2018_KERN[21846817]-g.indd 136 12/17/2018 3:31:03 PM Countersinking tools \ HSS conical countersink 75°

conical countersink HSS 75°

application: for 75° screw head countersinking or deburring holes.

75° HSS

HSS 75° conical countersink, three-ﬂ ute cutter for universal use up to 1000 N/mm2

HA HSS Z 3 Application: Advantage: For producing 75° counterbores up to 1000 N/mm2. . radial relief ensures optimum chip breaking Execution: . proﬁ le-ground triple-edge countersink with radial relief

Surface Uncoated f steel 700  (mm/U) 11499... Ident. No. mm mm mm mm 8 2 6 50 0.1 008 ● 10 2.5 6 54 0.12 010 ● 12.5 2.8 8 54 0.13 012 ● 15 3.2 8 56 0.14 015 ● 20 3.5 10 63 0.16 020 ● 25 6.3 10 71 0.18 025 ● Prod. Gr. 1EB

conical countersink HSS 120°

application: for 120° screw head countersinking or deburring holes.

120° HSS

HSS 120° conical countersinks for universal use up to 1000 N/mm2

HA HSS Z 3 Application: Execution: For producing 120° counterbores up to 1000 N/ . proﬁ le-ground triple-edge countersink with radial mm2. relief Advantage: . radial relief ensures optimum chip breaking

Surface Uncoated Uncoated f steel 700  (mm/U) 11502... 11502... Ident. No. Ident. No. mm mm mm mm 6.3 1.5 6 49 0.1 106 ● 306 ● 8 2 6 49 0.1 108 ● 308 ● 12.5 2.8 8 54 0.13 112 ● 312 ● 16 3.2 10 57 0.14 117 ● 316 ● 20 3.5 10 59 0.16 120 ● 320 ● 25 3.8 10 63 0.18 126 ● 325 ● a = Prod. Gr. 1EB ORION = Prod. Gr. 1EH Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 137 Availability subject to country specific rules and regulations.

0137_EN_2018_KERN[21846821]-h.indd 137 12/17/2018 3:31:04 PM Countersinking tools \ HSS conical countersink 120°

HSS 120° conical countersink, three-ﬂ ute cutter for universal use up to 1000 N/mm2

MK HSS Z 3 Application: Execution: For producing 120° counterbores up to 1000 N/ . proﬁ le-ground triple-edge countersink with radial mm2. relief Advantage: . radial relief ensures optimum chip breaking

Cutting material HSS f steel 700  11502... (mm/U) Ident. No. mm mm mm 31.5 4.2 107 MK 2 0.21 231 ● 40 10 134 MK 3 0.25 240 ● 50 14 143 MK 3 0.28 250 ● Prod. Gr. 1EB

Hand deburrers 90° HSS With 3 ﬂ utes

HSS Z 3 Application: Advantage: For producing 90° counterbores and for deburring . radial relief ensures optimum chip breaking 2 up to 1000 N/mm . . Ident. No. 111–125: Ident. No. 111–125 . innovative cutting geometry provides excellent Execution: cutting performance and good ﬁ nish quality . proﬁ le-ground triple-edge countersink with radial . ergonomic plastic handle ensures good power relief transmission

Spot-facer Ø (mm) 11511... 11511... Ident. No. Ident. No. 11.5 111 ● 211 ● 12.4 112 ● 212 ● 15 115 ● 215 ● 16.5 116 ● 216 ● 19 119 ● 219 ● 20.5 120 ● 220 ● 23 123 ● 223 ● 25 125 ● 225 ● a = Prod. Gr. 1EB ORION = Prod. Gr. 1EH

Source: Hahn+Kolb Werkzeuge GmbH 138 Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

0137_EN_2018_KERN[21846821]-h.indd 138 12/17/2018 3:31:06 PM Countersinking tools \ Hand countersink

HSSE 90° hand deburrer set, three-ﬂ ute cutter with hexagon shank for universal use up to 1000 N/mm2

HSS Z 3 Application: Advantage: For 90° counterboring and deburring for the material . Radial relief ensures optimum chip breaking groups of steel (stainless steel), non-ferrous metals, 2 . Innovative cutting geometry provides excellent and (cast iron) up to a strength of 1000 N/mm . cutting performance and good ﬁ nish quality Execution: Technical data: . Proﬁ le-ground triple-edge countersink with radial . Composition of set: 1 of each conical countersink relief on the blade 8/10/11.5/15/20.5

900 11511... Ident. No. ● Prod. Gr. 1EB

Handle with collet chuck From hand deburrer set

Ident. No. 530 11511... ● Prod. Gr. 1EB

HSS 90° hand deburring tool, three-ﬂ ute cutter with hexagon shank for universal use up to 1000 N/mm2

HSS Z 3 Application: Advantage: For 90° counterboring and deburring for the material . radial relief ensures optimum chip breaking groups of steel, (stainless steel), non-ferrous metals, 2 . precision grinding for the most demanding require- and (cast iron) up to a strength of 1000 N/mm in ments in terms of dimensional accuracy individual part and series production. . innovative cutting geometry provides excellent Execution: cutting performance and good fi nish quality . profi le-ground triple-edge countersink with radial Notes: back taper on the fl ute for the most demanding sha diameter 6mm of requirements for dimensional tolerance and process reliability

Spot-facer Ø (mm) 11511... Ident. No. 8 508 ● 10 510 ● 11.5 511 ● 15 515 ● 20.5 520 ● Prod. Gr. 1EB

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 139 Availability subject to country specific rules and regulations.

0139_EN_2018_KERN[21846825]-k.indd 139 12/17/2018 3:30:59 PM Countersinking tools \ pipe deburrers

HSS 90° pipe deburrers With straight or Morse taper shank

HA MK HSS Z 3 Application: Advantage: For manufacturing external and internal pipe debur- . Axially adjustable internal conical countersink for rers in the steel, stainless steel, NF metal and (cast) stepless adjustment to pipe diameter and wall 2 Ident. No. 160–320 material groups up to a strength of 1000 N/mm in thickness single part production. . 6 cutters ensure the surface is smooth and chatter-free Execution: . The two counterbore sections come apart for easy . Proﬁ le-ground three-cutter counterbore and sharpening ground external counterbore for high requirements for dimensional accuracy and process reliability

Ident. No. 500–660

Morse taper Tool holding device HA parallel shank shank Construction size Suitable for min./max. Suitable for min./max. Morse taper size Sha Ø (mm) 11513... 11513... pipe outer Ø pipe internal Ø Ident. No. Ident. No. 1 6.0-12.0 mm 2.0-5.4 mm - 12.5 160 ● - - 2 7.0-14.0 mm 2.6-7.8 mm - 12.5 180 ● - - 3 9.0-20.0 mm 3.6-12.8 mm - 16 240 ● - - 4 16.0-27.0 mm 4.6-24.0 mm - 16 320 ● - - 5 25.0-44.0 mm 20.0-39.0 mm MK 2 - - - 500 ● 6 41.0-60.0 mm 36.0-55.0 mm MK 3 - - - 660 ● Prod. Gr. 1EH

Solid carbide 90° deburrer

HA VHM Z 4 Application: Advantage: For producing chamfers and for deburring up to . Ident. No. 040–121: 1300 N/mm2. . Cutting edge treatment minimises micro-fractures Execution: . very good surface quality and dimensional . Solid carbide deburring tool with universal preci- accuracy sion grinding . Ident. No. 140–221: universal tool with an outstanding price-performance ratio

2 Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat. No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC 11538040-120 60 45 35 40 30 140 180 100 80 70 60 55 40 50 20 15 15 11538041-121 60 45 35 40 30 140 180 100 80 70 60 55 40 50 20 15 15 11538140-220 60 45 35 40 30 140 180 100 80 70 60 55 40 50 20 15 15 11538141-221 60 45 35 40 30 140 180 100 80 70 60 55 40 50 20 15 15

Surface Uncoated TiAlN Uncoated TiAlN Spot-facer Ø Countersink Length (mm) Sha Ø (mm) f steel 1000  11538... 11538... 11538... 11538... (mm) angle (Degree) (mm/U) Ident. No. Ident. No. Ident. No. Ident. No. 4 90 54 4 0.02 040 ● 041 ● 140 ● 141 ● 6 90 57 6 0.03 060 ● 061 ● 160 ● 161 ● 8 90 63 8 0.05 080 ● 081 ● 180 ● 181 ● 10 90 72 10 0.06 100 ● 101 ● 200 ● 201 ● 12 90 83 12 0.08 120 ● 121 ● 220 ● 221 ● ORION = Prod. Gr. 103 a = Prod. Gr. 114

Source: Hahn+Kolb Werkzeuge GmbH 140 Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

0139_EN_2018_KERN[21846825]-k.indd 140 12/17/2018 3:31:01 PM Countersinking tools \ SC deburrer

Solid carbide 60° deburrer

HA VHM Z 4 Application: Advantage: Ident. No. 040–140, 160, 180, 200, 220: For . Ident. No. 040–121: producing chamfers and for deburring up to 1300 . Cutting edge treatment minimises N/mm2. micro-fractures Ident. No. 141, 161, 181, 201, 221: For producing . very good surface quality and dimensional chamfers and for deburring workpieces up to 1300 accuracy 2 N/mm . . Ident. No. 140–221: universal tool with an outstanding price-performance ratio Execution: . Solid carbide deburring tool with universal precision grinding

2 Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat. No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC 11537040-120 60 45 35 40 30 140 180 100 80 70 60 55 40 50 20 15 15 11537041-121 60 45 35 40 30 140 180 100 80 70 60 55 40 50 20 15 15 11537140-220 60 45 35 40 30 140 180 100 80 70 60 55 40 50 20 15 15 11537141-221 60 45 35 40 30 140 180 100 80 70 60 55 40 50 20 15 15

Surface Uncoated TiAlN Uncoated TiAlN Spot-facer Ø Countersink Length (mm) Sha Ø (mm) f steel 1000  11537... 11537... 11537... 11537... (mm) angle (Degree) (mm/U) Ident. No. Ident. No. Ident. No. Ident. No. 4 60 54 4 0.02 040 ● 041 ● 140 ● 141 ● 6 60 57 6 0.03 060 ● 061 ● 160 ● 161 ● 8 60 63 8 0.05 080 ● 081 ● 180 ● 181 ● 10 60 72 10 0.06 100 ● 101 ● 200 ● 201 ● 12 60 83 12 0.08 120 ● 121 ● 220 ● 221 ● ORION = Prod. Gr. 103 a = Prod. Gr. 114

Solid carbide 90° forward and reverse deburring tool TiAlN, four-ﬂ ute cutter for universal use up to 1300 N/mm2

VHM TiAlN Z 4 Application: Execution: For linear and circular forwards and backwards deburring or 90°chamfering on . Solid carbide TiAlN 90° tool with universal precision grinding workpieces in the steel, stainless steel, NF metal, cast and special alloy material groups up to a strength of 1300 N/mm2 in single part and series production. Advantage: . innovative cutting geometry with greater number of ﬂ utes provides excellent cutting performance and good surface quality

100 L2 100 4 L2 D D D1 D2 D2 L1 15 L1

Ident. No. 040–060 Ident. No. 080–120

Construction size D (mm) D1 (mm) D2 (mm) L1 (mm) L2 (mm) f steel 1000  11539... (mm/U) Ident. No. 4 3.9 0.6 6 2 1 0.01 040 ● 6 5.8 0.8 6 3.8 1.9 0.01 060 ● 8 7.8 6 6 1.8 0.9 0.01 080 ● 10 9.8 6 6 3.8 1.9 0.012 100 ● 12 11.8 6 6 5.8 2.9 0.015 120 ● Prod. Gr. 114

HSS 90° conical countersink, for ﬁ ne thread core holes ( DIN 1866 ) for universal use up to 1000 N/mm2

HA HSS

Application: Advantage: For producing 90° counterbores of fi ne quality grade . spiral chip fl utes ensure smooth cutting and the for thread core holes in accordance with DIN 74-1. blade does not catch Execution: . profi le-ground with spiral blade

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 141 Availability subject to country specific rules and regulations.

0141_EN_2018_KERN[21846830]-e.indd 141 12/17/2018 3:31:02 PM Countersinking tools \ Conical countersink with ﬁ xed pilot

Suitable for screw Spot-facer Ø (mm) Tenon Ø (mm) Sha Ø (mm) Length (mm) Number of cutting 11480... thread edges (PCS) Ident. No. M3 6 2.5 5 71 3 030 ● M4 8 3.3 5 71 3 040 ● M5 10 4.2 8 80 3 050 ● M6 11.5 5.0 8 80 3 060 ● M8 15 6.8 12.5 100 3 080 ● Prod. Gr. 103 HSS 90° conical countersink, for ﬁ ne through holes ( DIN 1866 ) for universal use up to 1000 N/mm2

HA HSS

Application: Advantage: For producing 90° counterbores of fi ne quality grade . spiral chip fl utes ensure smooth cutting and the for through holes in accordance with DIN 74-1. blade does not catch Execution: . profi le-ground with spiral blade

Suitable for screw Spot-facer Ø (mm) Tenon Ø (mm) Sha Ø (mm) Length (mm) Number of cutting 11483... thread edges (PCS) Ident. No. M3 6.0 3.2 5 71 3 030 ● M4 8.0 4.3 5 71 3 040 ● M5 10.0 5.3 8 80 3 050 ● M6 11.5 6.4 8 80 3 060 ● M8 15.0 8.4 12.5 100 3 080 ● Prod. Gr. 103 HSS 90° conical countersink, for medium through holes ( DIN 1866 ) for universal use up to 1000 N/mm2

HA HSS

Application: Advantage: For producing 90° counterbores of medium quality . spiral chip ﬂ utes ensure smooth cutting and the grade for through holes in accordance with DIN 74-1. blade does not catch Execution: . proﬁ le-ground with spiral blade

Suitable for screw Spot-facer Ø (mm) Tenon Ø (mm) Sha Ø (mm) Length (mm) Number of cutting 11489... thread edges (PCS) Ident. No. M3 6.6 3.4 5 71 3 030 ● M4 9.0 4.5 8 80 3 040 ● M5 11.0 5.5 8 80 3 050 ● M6 13.0 6.6 12.5 100 3 060 ● M8 17.2 9.0 12.5 100 3 080 ● Prod. Gr. 103 Counterbore 180° ( DIN 373 ) For thread core holes

180° HA HSS HSSE

Application: Execution: For producing 180° counterbores for thread core . proﬁ le-ground with spiral blade holes in accordance with DIN 74-2, types H, J, K and DIN 974-1. Advantage: . spiral chip ﬂ utes ensure smooth cutting and the blade does not catch

Source: Hahn+Kolb Werkzeuge GmbH 142 Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

0141_EN_2018_KERN[21846830]-e.indd 142 12/17/2018 3:31:04 PM Countersinking tools \ Counterbore with ﬁ xed pilot

Cutting material HSS HSSE Surface Uncoated Uncoated Suitable for screw Spot-facer Ø (mm) Tenon Ø (mm) Sha Ø (mm) Length (mm) Number of cutting 11438... 11439... thread edges (PCS) Ident. No. Ident. No. M3 6 2.5 5 71 3 030 ● 030 ● M3 6.5 2.5 5 71 3 - - 031 ● M4 8 3.3 5 71 3 040 ● 040 ● M5 10 4.2 8 80 3 050 ● 050 ● M6 11 5 8 80 3 060 ● 060 ● M8 15 6.8 12.5 100 3 080 ● 080 ● M10 18 8.5 12.5 100 3 100 ● 100 ● M12 20 10.2 12.5 100 3 120 ● 120 ● a = Prod. Gr. 1EA ORION = Prod. Gr. 103 Counterbore 180° ( DIN 373 ) For ﬁ ne through hole

180° HA HSS HSSE TiN

Application: Execution: No. 11442–11445: For producing counterbores 180° . profi le-ground with spiral blade No. 11442–11445 fi ne quality grade for through hole to DIN 74-2, forms H, J, K and DIN 974-1. Advantage: No. 11451: For producing 180° counterbores of fi ne . spiral chip fl utes ensure smooth cutting and the quality grade for through holes in accordance with blade does not catch DIN 74-2, type H, J, K and DIN 974-1. . precision grinding for highest requirements in terms of concentricity and dimensional accuracy No. 11451

2 Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat. No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC 11442 30 20 10 10 70 80 45 40 40 40 30 15 11445 30 20 10 10 10 70 80 45 40 40 40 30 15 7 11451 30 20 10 10 10 70 80 45 40 40 40 30 15 7

Cutting material HSS HSSE HSSE Surface Uncoated Uncoated TiN Suitable for Spot-facer Ø Tenon Ø (mm) Sha Ø (mm) Length (mm) Number of 11442... 11445... 11451... screw thread (mm) cutting edges Ident. No. Ident. No. Ident. No. (PCS) M2 4.3 2.2 4.3 56 3 020 ● - - - - M3 6 3.2 5 71 3 030 ● 030 ● 030 ● M3 6.5 3.2 5 71 3 - - 031 ● 031 ● M4 8 4.3 5 71 3 040 ● 040 ● 040 ● M5 10 5.3 8 80 3 050 ● 050 ● 050 ● M6 11 6.4 8 80 3 060 ● 060 ● 060 ● M8 15 8.4 12.5 100 3 080 ● 080 ● 080 ● M10 18 10.5 12.5 100 3 100 ● 100 ● 100 ● M12 20 13 12.5 100 3 120 ● 120 ● 120 ● a = Prod. Gr. 1EA ORION = Prod. Gr. 103 Counterbore 180° ( DIN 373 ) For through hole, medium quality grade

180° HA HSS HSSE TiN

Application: Execution: For producing 180° counterbores of medium quality . proﬁ le-ground with spiral blade No. 11449–11452 grade for through holes in accordance with DIN 74-2, type H, J, K and DIN 974-1. Advantage: . spiral chip ﬂ utes ensure smooth cutting and the blade does not catch

No. 11454

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 143 Availability subject to country specific rules and regulations.

0141_EN_2018_KERN[21846830]-e.indd 143 12/17/2018 3:31:05 PM Countersinking tools \ Counterbore with ﬁ xed pilot

2 Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat. No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC 11449 30 20 10 10 70 80 45 40 40 40 30 15 11452 30 20 10 10 10 70 80 45 40 40 40 30 15 7 11454 30 20 10 10 10 70 80 45 40 40 40 30 15 7

Cutting material HSS HSSE HSSE Surface Uncoated Uncoated TiN Suitable for Spot-facer Ø Tenon Ø (mm) Sha Ø (mm) Length (mm) Number of 11449... 11452... 11454... screw thread (mm) cutting edges Ident. No. Ident. No. Ident. No. (PCS) M10 18 11 12.5 100 3 100 ● 100 ● 100 ● M12 20 13.5 12.5 100 3 120 ● 120 ● 120 ● M2 4.3 2.4 4.3 56 3 020 ● - - - - M3 6 3.4 5 71 3 030 ● 030 ● 030 ● M3 6.5 3.4 5 71 3 - - 031 ● 031 ● M4 8 4.5 5 71 3 040 ● 040 ● 040 ● M5 10 5.5 8 80 3 050 ● 050 ● 050 ● M6 11 6.6 8 80 3 060 ● 060 ● 060 ● M8 15 9 12.5 100 3 080 ● 080 ● 080 ● a = Prod. Gr. 1EA ORION = Prod. Gr. 103 HSS/HSSE counterbore sets ( DIN 373 ) In metal box

Application: Execution: No. 11438: For producing 180° counterbores for . profi le-ground with spiral blade thread core holes in accordance with DIN 74-2, types H, J, K and DIN 974-1. Advantage: No. 11439: For producing counterbores for thread . spiral chip fl utes ensure smooth cutting and the core holes in accordance with DIN 74-2, types H, J, K blade does not catch and DIN 974-1. No. 11442–11445: For producing 180° counterbores Technical data: of fi ne quality grade for through holes in accordance . Composition of set: 1 of each counterbore for M3/ with DIN 74-2, type H, J, K and DIN 974-1. M4/M5/M6/M8/M10 No. 11449–11452: For producing 180° counterbores of medium quality grade for through holes in accordance with DIN 74-2, type H, J, K and DIN 974-1.

2 Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat. No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC 11438500 30 20 10 10 70 80 45 40 40 40 30 15 11439500 30 20 10 10 10 70 80 45 40 40 40 30 15 7 11442500 30 20 10 10 70 80 45 40 40 40 30 15 11445500 30 20 10 10 10 70 80 45 40 40 40 30 15 7 11449500 30 20 10 10 70 80 45 40 40 40 30 15 11452500 30 20 10 10 10 70 80 45 40 40 40 30 15 7

Cutting material HSS HSSE HSS HSSE HSS HSSE Version 11438... 11439... 11442... 11445... 11449... 11452... Ident. No. Ident. No. Ident. No. Ident. No. Ident. No. Ident. No. For thread core hole M3/M4/M5/M6/M8/M10 500 ● 500 ● ------For clearance hole M3/M4/M5/M6/M8/M10, ﬁ ne quality grade - - - - 500 ● 500 ● - - - - For clearance hole M3/M4/M5/M6/M8/M10, - - - - ● ● medium quality grade - - - - 500 500 a = Prod. Gr. 1EA ORION = Prod. Gr. 103 HSS 180° counterbore, uncoated for ﬁ ne through holes ( DIN 373 ) for universal use up to 1000 N/mm2

MK HSS

Application: Advantage: For producing 180° counterbores of fi ne quality . spiral chip fl utes ensure smooth cutting and the grade for through holes in accordance with DIN 74-2, blade does not catch type H, J, K and DIN 974-1. . precision grinding for high requirements on concentricity and dimensional accuracy Execution: . profi le-ground with spiral blade

Cutting material HSS Suitable for screw Spot-facer Ø (mm) Tenon Ø (mm) Morse taper size Length (mm) Number of cutting 11443... thread edges (PCS) Ident. No. M10 18 10.5 MK 2 150 3 210 ●

Source: Hahn+Kolb Werkzeuge GmbH 144 Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

0141_EN_2018_KERN[21846830]-e.indd 144 12/17/2018 3:31:07 PM Countersinking tools \ Counterbore with ﬁ xed pilot

Cutting material HSS Suitable for screw Spot-facer Ø (mm) Tenon Ø (mm) Morse taper size Length (mm) Number of cutting 11443... thread edges (PCS) Ident. No. M12 20 13 MK 2 150 3 212 ● M14 24 15 MK 2 160 3 214 ● M16 26 17 MK 3 190 3 216 ● M20 33 21 MK 3 190 3 220 ● M24 40 25 MK 3 205 3 224 ● Prod. Gr. 103 HSS 180° counterbore, uncoated for medium through holes for universal use up to 1000 N/mm2

180° MK HSS

Application: Execution: For producing 180° counterbores of medium quality . proﬁ le-ground with spiral blade grade for through holes in accordance with DIN 74-2, type H, J, K and DIN 974-1. Advantage: . spiral chip ﬂ utes ensure smooth cutting and the blade does not catch

Cutting material HSS Surface Uncoated Suitable for screw Spot-facer Ø (mm) Tenon Ø (mm) Morse taper size Length (mm) Number of cutting 11446... thread edges (PCS) Ident. No. M10 18 11 MK 2 150 3 210 ● M12 20 13.5 MK 2 150 3 212 ● M14 24 15.5 MK 2 160 3 214 ● M16 26 17.5 MK 3 190 3 216 ● M20 33 22 MK 3 190 3 220 ● M24 40 26 MK 3 205 3 224 ● Prod. Gr. 103 HSS tapered cone drill set for universal use up to 1000 N/mm2

HSS TiN

Application: Advantage: For producing bores in thin sheets made from steel, . Innovative cutting geometry: All bores are burr and non-ferrous metals and cast iron. Also suitable for all chatter free plastics, for hard paper and plywood, as well as all . User-friendly regrinding: Drills can be reground materials of similar structure and strength. repeatedly Execution: . No deformations even with the thinnest material thicknesses . Proﬁ le-ground to meet the highest requirements for dimensional accuracy and process reliability . Robust metal box protects the tool from damage

Surface Uncoated TiN Composition of set Number of pieces in assortment/ 11403... 11404... set (PCS) Ident. No. Ident. No. Type 0/1/2 + drilling paste 4 010 ● 010 ● Prod. Gr. 103

HSS step drill with spiral for universal use up to 1000 N/mm2

HSS TiN

Application: . No catching on the cutter and low cutting forces For drilling and simultaneous deburring in steel, and torques stainless steel, non-ferrous metals and cast iron. . High variability: A wide range of bores can be covered with just one tool Execution: . Ident. No. 100, 200, 300: 3-facet shank ensures Ident. No. 100–105, 200–205, 300–305 . Proﬁ le-ground and twisted good torque transfer in the chuck Advantage: . Ident. No. 150, 250, 350: 3-facet shank ensures . Twisted design ensures smooth cutting behaviour good torque transfer in the chuck, TiN coating for increased service life requirements

Ident. No. 150–155, 250–255, 350–355 Version HSS-TIN

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 145 Availability subject to country specific rules and regulations.

0141_EN_2018_KERN[21846830]-e.indd 145 12/17/2018 3:31:09 PM Countersinking tools \ step drill

2 Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat. No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC 11405100-300              11405105-305              11405150-350                11405155-355               

Surface Plasma-nitrated Uncoated TiN TiN Type Step Ø Step length Length (mm) Sha Ø (mm) 11405... 11405... 11405... 11405... (mm) Ident. No. Ident. No. Ident. No. Ident. No. 4 mm | 5 mm | 6 mm | 7 mm | 1 8 mm | 9 mm | 5 79 6 100 ● 105 ● 150 ● 155 ● 10 mm | 11 mm | 12 mm 6 mm | 8 mm | 10 mm | 12 mm 2 | 14 mm | 16 4.5 71 9 200 ● 205 ● 250 ● 255 ● mm | 18 mm | 20 mm 6 mm | 8 mm | 10 mm | 12 mm | 14 mm | 16 mm 18 mm 3 | | 4 100 10 300 ● 305 ● 350 ● 355 ● 20 mm | 22 mm | 24 mm | 26 mm | 28 mm | 30 mm ORION = Prod. Gr. 103 a = Prod. Gr. 114 Step drill set with spiral Sets in box

HSS TiN

Application: Advantage: For drilling and simultaneous deburring in steel, . Twisted design ensures smooth cutting behaviour stainless steel, non-ferrous metals and cast iron. . No catching on the cutter and low cutting forces and torques Execution: . High variability: A wide range of bores can be . Proﬁ le-ground and twisted cutter covered with just one tool Ident. No. 900–905 . Ident. No. 800, 900: 3-facet shank ensures good torque transfer in the chuck

Surface Plasma-nitrated Uncoated TiN TiN Composition Number of 11405... 11405... 11405... 11405... of set pieces in Ident. No. Ident. No. Ident. No. Ident. No. assortment/set (PCS) Type 1/2/3 3 800 ● 805 ● 900 ● 905 ● ORION = Prod. Gr. 103 a = Prod. Gr. 114

2 Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat. No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC 11405800              11405805              11405900                11405905               

HSS step drill, straight groove for universal use up to 1000 N/mm2

HSS TiN

Application: Advantage: For drilling and simultaneous deburring in steel, . High variability: A wide range of bores can be stainless steel, non-ferrous metals and cast iron. covered with just one tool Ident. No. 100–105, 200–205, 300–305 . Ident. No. 100, 150, 200, 250, 300, 350: 3-facet Execution: shank ensures good torque transfer in the chuck . Proﬁ le-ground and straight

Ident. No. 150–155, 250–255, 350–355

Source: Hahn+Kolb Werkzeuge GmbH 146 Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

0141_EN_2018_KERN[21846830]-e.indd 146 12/17/2018 3:31:10 PM Countersinking tools \ step drill

2 Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat. No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC 11407100-300              11407105-305              11407150-350                11407155-355               

Surface Uncoated Uncoated TiN TiN Type Step Ø Step length Length (mm) Sha Ø (mm) 11407... 11407... 11407... 11407... (mm) Ident. No. Ident. No. Ident. No. Ident. No. 4 mm | 5 mm | 6 mm | 7 mm | 1 8 mm | 9 mm | 5 79 6 100 ● 105 ● 150 ● 155 ● 10 mm | 11 mm | 12 mm 6 mm | 8 mm | 10 mm | 12 mm 2 | 14 mm | 16 4.5 71 9 200 ● 205 ● 250 ● 255 ● mm | 18 mm | 20 mm 6 mm | 8 mm | 10 mm | 12 mm | 14 mm | 16 mm 18 mm 3 | | 4 85 12 300 ● 305 ● 350 ● 355 ● 20 mm | 22 mm | 24 mm | 26 mm | 28 mm | 30 mm ORION = Prod. Gr. 103 a = Prod. Gr. 114 HSS step drill set, straight groove for universal use up to 1000 N/mm2

HSS TiN

Application: Advantage: For drilling and simultaneous deburring up to a . High variability: A wide range of bores can be diameter of 30 mm and a material thickness of 5 covered with just one tool mm in steel, stainless steel, non-ferrous metals and . Ident. No. 800, 900: 3-facet shank ensures good cast iron. torque transfer in the chuck Execution: Ident. No. 900 . Proﬁ le-ground and straight

Surface Uncoated Uncoated TiN TiN Composition Number of 11407... 11407... 11407... 11407... of set pieces in Ident. No. Ident. No. Ident. No. Ident. No. assortment/set (PCS) Type 1/2/3 3 800 ● 805 ● 900 ● 905 ● ORION = Prod. Gr. 103 a = Prod. Gr. 114

2 Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat. No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC 11407800              11407805              11407900                11407905               

Step drill HSS uncoated, straight groove with exchange bit For universal use up to 1000 N/mm2 in general tool construction

HSS TiN

Application: Advantage: For drilling and simultaneous deburring of holes up . High variability: A wide range of bores can be to a diameter of 58 mm and a material thickness of covered with just one tool up to 4 mm in steel, non-ferrous metals and cast . 3-facet shank ensures good torque transfer in the iron. Tool diameters are geared towards meeting the chuck demands of general tool construction. . User-friendly tool changing: Bit easily replaced in case of wear No. 11409 Execution: TiN-coated . Step drill, proﬁ le-ground, with straight cutting edge

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 147 Availability subject to country specific rules and regulations.

0141_EN_2018_KERN[21846830]-e.indd 147 12/17/2018 3:31:12 PM Countersinking tools \ step drill

Surface Uncoated TiN Type Step Ø Step length Length (mm) 11408... 11409... (mm) Ident. No. Ident. No. 9 mm | 12 mm | 15 mm | 18 mm 21 mm A1 | | 4 85 010 ● 010 ● 24 mm | 27 mm | 30 mm | 33 mm | 36 mm 25 mm | 28 mm | 31 mm | 34 mm | 37 mm 40 mm 43 A2 | | 4 85 015 ● 015 ● mm | 46 mm | 49 mm | 52 mm | 55 mm | 58 mm Prod. Gr. 114

HSS step drill For the electrical industry

HSS TiN

Application: Advantage: For drilling through holes for reinforced pipe thread . High variability: A wide range of bores can be in steel, stainless steel, non-ferrous metals and cast covered with just one tool iron. . 3-facet shank ensures good torque transfer in the chuck Execution: . User-friendly tool changing: Bit easily replaced in No. 11408 020, 11409 020–11409 025 . Step drill, proﬁ le-ground, with spiral cutting edge case of wear

2 Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat. No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC 11408020              11408030              11409020                11409025               

Source: Hahn+Kolb Werkzeuge GmbH 148 Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

0141_EN_2018_KERN[21846830]-e.indd 148 12/17/2018 3:31:12 PM Countersinking tools \ step drill

HSS step drill, spiral groove with interchangeable bit For universal use up to 1000 N/mm2 in electrical industry MF thread

HSS TiN

Application: . No. 11409: Step drill HSS TiN, profi le-ground and For drilling through holes and core holes for metric twisted tip for highest requirements in terms of fi ne thread up to a material thickness of 4 mm in dimensional accuracy and process reliability steel, stainless steel, non-ferrous metals and cast iron. Advantage: . High variability: A wide range of bores can be Execution: covered with just one tool No. 11408 . No. 11408: Step drill HSS, uncoated and profi le- . 3-facet shank ensures good torque transfer in the ground with twisted tip for highest requirements chuck in terms of dimensional accuracy and process . User-friendly tool changing: Bit easily replaced in reliability case of wear

Surface Plasma-nitrated TiN Type Step Ø Step length Length 11408... 11409... (mm) (mm) Ident. No. Ident. No. 10.5/12.5 mm (M12 x 1.5) | 14.5/16.5 mm (M16 x 1.5) | No. 11409 18.5/20.5 mm (M20 x 1.5) E 3 S | 4 110 040 ● 040 ● 23.5/25.5 mm (M25 x 1.5) | 30.5/32.5 mm (M32 x 1.5) | 38.5/40.5 mm (M40 x 1.5) Prod. Gr. 114

HSS exchange bit for step drill No. 11408-11409

HSS TiN

Application: requirements in terms of dimensional accuracy For use in step drill 11408 010-040 and 11409 and process reliability No. 11408 010-040 Spare drills Advantage: Execution: . Twisted design ensures smooth cutting behaviour . No. 11408: Replacement bit HSS, uncoated with . User-friendly tool changing: Bit easily replaced in 118° tip angle and proﬁ le-ground, twisted tip for case of wear highest requirements in terms of dimensional accuracy and process reliability Technical data: . No. 11409: Replacement bit HSS-TiN, with 118° . Type: Step drills No. 11409 tip angle and proﬁ le-ground, twisted tip for highest Spare drills

Surface Uncoated TiN 11408... 11409... Ident. No. Ident. No. 110 ● 110 ● Prod. Gr. 114

Pilot with clamping surface For piloted counterbore no. 11540-11543

Application: Advantage: L For piloted counterbore no. 11540-11543 . High-quality ground steel ensures a long service L1 life Execution:

. Precision-ground hardened steel with clamping D surface D1

Construc- D (mm) L (mm) D1 (mm) L1 (mm) 11567... Construc- D (mm) L (mm) D1 (mm) L1 (mm) 11567... tion size Ident. No. tion size Ident. No. 00 2 28 1.7 5 012 ● 02 4 28 2.5 5 191 ● 01 4 28 2 5 121 ● 01 3 28 2 5 107 ● 00 3 28 1.7 5 042 ● 02 4.5 28 2.5 5 199 ● 02 3 28 2.5 5 178 ● 01 3.4 28 2 5 112 ○ 01 2.5 28 2 5 098 ○ 02 5 28 2.5 5 208 ● Prod. Gr. 120

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 149 Availability subject to country specific rules and regulations.

0149_EN_2018_KERN[21846841]-c.indd 149 12/17/2018 3:30:58 PM Countersinking tools \ BILZ countersink and holder

Piloted counterbores

Application: Execution: . No. 11540: No. 11540: For machining 180° countersinks in . No. 11540: proﬁ le-ground piloted counterbore . very positive chip angle ensures a very so cut in connection with interchangeable pilots in steel, with removable pilot with twisted cutting edge, long-chipping materials up to 1000 N/mm2 and (stainless steel), NF metal, (cast) and special alloy with three cutting edges for diameters up to minimises the cutting forces material groups up to a strength of 1000 N/mm2 in 17.5 mm, or four cutting edges as from 18.0 mm . wide chip chambers for smooth chip removal single part production. diameter . No. 11543: No. 11543: For machining 180° countersinks in . No. 11543: carbide-tipped piloted counterbore . Special geometry ensures high machining rates connection with interchangeable pilots in steel, with removable pilot and a straight cutting edge, in both short- and long-chipping materials (stainless steel), NF metal, cast and special alloy three cutting edges . long service life due to high-quality cemented material groups up to a strength of 1300 N/mm2 in carbide and high-strength soldering single part production. Advantage: . innovative cutting geometry provides excellent cutting performance and good ﬁ nish quality E G D1 Dk8

L No. 11540 No. 11543 No. 11540 HSS 2 Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat. No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC 11540 90 60 40 10 8 60 80 30 45 30 35 30 5 11543 90 65 50 30 25 100 130 80 100 25 30 70 5 5 5 Cutting material HSS Carbide Construction size Dk8 (mm) D1 (mm) D2 (mm) G E (mm) L (mm) Number of cutting 11540... 11543... edges (PCS) Ident. No. Ident. No. 00 5 1.7 - - 23 35 3 050 ● - - 01 6 2 - - 23 35 3 060 ● - - 01 6.5 2 - - 23 35 3 065 ● - - 02 7 2.5 3 - 23 35 3 070 ● - - 02 7.5 2.5 3 - 23 35 3 075 ● - - 02 8 2.5 3 - 23 35 3 080 ● - - 02 8.5 2.5 3 - 23 35 3 085 ● - - 1 9 3 3.7 M4 25 40 3 090 ● - - 1 9.5 3 3.7 M4 25 40 3 095 ● - - 1 10 3 3.7 M4 25 40 3 100 ● 100 ○ 1 10.4 3 3.7 M4 25 40 3 104 ● - - 1 10.5 3 3.7 M4 25 40 3 105 ● - - 1 11 3 3.7 M4 25 40 3 110 ● 110 ● 1 11.5 3 3.7 M4 25 40 3 115 ● - - 1 12 3 3.7 M4 25 40 3 120 ● 120 ● 1 12.5 3 3.7 M4 25 40 3 125 ● - - 2 13 4 5.5 M5 30 48 3 130 ● - - 2 13.5 4 5.5 M5 30 48 3 135 ● - - 2 14 4 5.5 M5 30 48 3 140 ● - - 2 14.5 4 5.5 M5 30 48 3 145 ● - - 2 15 4 5.5 M5 30 48 3 150 ● 150 ● 2 16 4 5.5 M5 30 48 3 160 ● 160 ○ 2 16.5 4 5.5 M5 30 48 3 165 ● - - 2 17 4 5.5 M5 30 48 3 170 ● 170 ○ 2 17.5 4 5.5 M5 30 48 3 175 ● - - 3 18 5 6.6 M6 34 56 4 180 ● - - 3 18 5 6.6 M6 34 56 3 - - 180 ● 3 18.5 5 6.6 M6 34 56 4 185 ● - - 3 19 5 6.6 M6 34 56 4 190 ● - - 3 19 5 6.6 M6 34 56 3 - - 190 ○ 3 20 5 6.6 M6 34 56 4 200 ● - - 3 20 5 6.6 M6 34 56 3 - - 200 ● 3 21 5 6.6 M6 34 56 4 210 ● - - 3 22 5 6.6 M6 34 56 4 220 ● - - 3 22 5 6.6 M6 34 56 3 - - 220 ○ 3 22.5 5 6.6 M6 34 56 4 225 ● - - 4 23 6 7.7 M8 38 61 4 230 ● - - 4 24 6 7.7 M8 38 61 4 240 ● - - 4 24 6 7.7 M8 38 61 3 - - 240 ○ 4 25 6 7.7 M8 38 61 4 250 ● - - 4 25 6 7.7 M8 38 61 3 - - 250 ○ 4 26 6 7.7 M8 38 61 4 260 ● - - 4 26 6 7.7 M8 38 61 3 - - 260 ○ 4 27 6 7.7 M8 38 61 4 270 ● - - 4 28 6 7.7 M8 38 61 4 280 ● - - 4 28 6 7.7 M8 38 61 3 - - 280 ○ 4 29 6 7.7 M8 38 61 4 290 ● - - 4 30 6 7.7 M8 38 61 4 300 ● - - 4 30 6 7.7 M8 38 61 3 - - 300 ● 4 32 6 7.7 M8 38 61 4 320 ● - - 4 32 6 7.7 M8 38 61 3 - - 320 ● 4 33 6 7.7 M8 38 61 4 330 ● - - 4 33 6 7.7 M8 38 61 3 - - 330 ● 5 34 8 10.6 M10 39 67 4 340 ● - - 5 35 8 10.6 M10 39 67 4 350 ● - - 5 36 8 10.6 M10 39 67 4 360 ● - - 5 38 8 10.6 M10 39 67 4 380 ● - - 5 40 8 10.6 M10 39 67 4 400 ● - - 5 42 8 10.6 M10 39 67 4 420 ● - - 5 45 8 10.6 M10 39 67 4 450 ● - - 5 1/2 48 9 12.7 M12 40 68 4 480 ○ - - 5 1/2 50 9 12.7 M12 40 68 4 500 ● - - Prod. Gr. 116 Source: Hahn+Kolb Werkzeuge GmbH 150 Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

0149_EN_2018_KERN[21846841]-c.indd 150 12/17/2018 3:31:00 PM Countersinking tools \ BILZ countersink and holder

Pilot with thread For piloted counterbore no. 11540-11543

Application: Advantage: L For piloted counterbore no. 11540-11543. . High-quality ground steel ensures a long service L1 life Execution:

. Precision-ground hardened steel with thread Notes: D Conﬁ gure axial clearance of 0.2 mm so that pin

doesn’t turn D1

Construc- D (mm) L (mm) D1 (mm) L1 (mm) 11569... Construc- D (mm) L (mm) D1 (mm) L1 (mm) 11569... tion size Ident. No. tion size Ident. No. 1 3 60 3 7 002 ● 3 6.5 81 5 10 316 ● 1 4.5 60 3 7 031 ● 3 7 81 5 10 325 ● 1 4.8 60 3 7 039 ● 3 8 81 5 10 344 ● 1 5 60 3 7 043 ● 3 8.5 81 5 10 353 ● 1 5.3 60 3 7 047 ○ 3 9 81 5 10 364 ● 1 5.5 60 3 7 050 ● 3 10 81 5 10 385 ● 1 5.8 60 3 7 055 ● 3 10.5 81 5 10 391 ● 1 6 60 3 7 058 ● 4 6 88 6 12 392 ● 1 6.4 60 3 7 064 ● 4 8 88 6 12 439 ● 1 6.5 60 3 7 065 ● 4 8.5 88 6 12 449 ● 1 6.6 60 3 7 067 ● 4 9 88 6 12 460 ● 1 7 60 3 7 073 ● 4 10 88 6 12 484 ● 1 8 60 3 7 088 ● 4 10.5 88 6 12 496 ○ 1 8.5 60 3 7 098 ● 4 11 88 6 12 508 ● 1 9 60 3 7 109 ● 4 11.4 88 6 12 520 ● 1 10 60 3 7 133 ● 4 12 88 6 12 532 ● 2 4 71 4 10 146 ● 4 13 88 6 12 556 ● 2 4.5 71 4 10 157 ● 5 17 103 8 18 583 ● Prod. Gr. 120 Pilot with thread For piloted counterbore no. 11540-11543

Application: Advantage: L For piloted counterbore no. 11540-11543 . High-quality ground steel ensures a long service L1 life Execution: . Precision-ground hardened steel with thread D D1

Construc- D (mm) L (mm) D1 (mm) L1 (mm) 11571... Construc- D (mm) L (mm) D1 (mm) L1 (mm) 11571... tion size Ident. No. tion size Ident. No. 3 11 81 5 10 204 ● 4 15 88 6 12 261 ● 3 11.5 81 5 10 207 ● 4 16 88 6 12 270 ● 3 12 81 5 10 210 ● 4 17 88 6 12 276 ○ 3 13 81 5 10 216 ● 4 18 88 6 12 282 ● 3 13.5 81 5 10 219 ● 4 19 88 6 12 285 ○ 3 14 81 5 10 222 ● 4 20 88 6 12 288 ○ 3 15 81 5 10 225 ○ 5 17.5 103 8 18 319 ○ 3 16 81 5 10 228 ○ 5 20 103 8 18 328 ○ 5 25 103 8 18 343 ○ Prod. Gr. 120 Holder for piloted counterbore type H with straight shank For piloted counterbore no. 11540-11543

Application: Advantage: For piloted counterbore no. 11540-11543 . High-quality ground steel ensures a long service life Execution: . Precision-ground hardened steel with straight shank D D1

e L

Construction size D (mm) L (mm) D1 (mm) e (mm) 11582... Ident. No. 00/01/02 9 59 6 24 005 ● 1 12.5 76 8 36 010 ● 2 17 91 10 41 020 ● 3 21 109 12 49 030 ● 4 28 112 14 52 040 ● 5 32 125 18 65 050 ● Prod. Gr. 120

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 151 Availability subject to country specific rules and regulations.

0151_EN_2018_KERN[21846844]-d.indd 151 12/17/2018 3:30:58 PM Countersinking tools \ BILZ countersink and holder

Holder for piloted counterbore type H with morse taper shank For piloted counterbore no. 11540-11543

Application: Advantage: For piloted counterbore no. 11540-11543 . High-quality ground steel ensures a long service life Execution: . Precision-ground hardened steel with Morse taper D

e L

Construction size D (mm) L (mm) e (mm) Morse taper size 11584... Ident. No. 1 12.5 104 42 MK 1 010 ● 2 17 109 47 MK 1 020 ● 3 21 132 57 MK 2 030 ● 4 28 135 60 MK 4 040 ● 4 28 155 61 MK 3 045 ● 5 32 168 74 MK 5 050 ● 5 1/2 37 178 84 MK 3 055 ● 1 12.5 142 80 MK 1 110 ○ 2 17 152 90 MK 1 120 ○ 3 21 185 110 MK 2 130 ● 4 28 190 115 MK 2 140 ● 4 28 210 116 MK 3 145 ● Prod. Gr. 120

TU reverse counterbores

Application: Execution: Advantage: No. 11590: For producing 180° reverse counter- . No. 11590: Reverse counterbore with removable . Special geometry ensures high machining rates in bores in conjunction with exchangeable pilot up to a pilot with twisted cutting edge, with three cutting both short- and long-chipping materials strength of 1000 N/mm2. edges for diameters up to 17.5 mm, or four cutting . No. 11590: wide chip chambers for smooth chip No. 11593: For producing 180° reverse counter- edges for diameters upwards of 18.0 mm removal bores in conjunction with exchangeable pilot up to a . No. 11593: carbide-tipped reverse counterbore . No. 11593: strength of 1300 N/mm2. with removable pilot and a straight cutting edge, . long service life due to high-quality cemented three cutting edges carbide and high-strength soldering . innovative cutting geometry provides excellent cutting performance and good ﬁ nish quality

No. 11590 No. 11593 HSS Carbide

Cutting material HSS Carbide Cutting material HSS Carbide Cutting edge Hole Ø of Length (mm) 11590... 11593... Cutting edge Hole Ø of Length (mm) 11590... 11593... Ø (mm) mount (mm) Ident. No. Ident. No. Ø (mm) mount (mm) Ident. No. Ident. No. 10 5 28 100 ● - - 25 11 24 250 ● - - 11 5 28 110 ● - - 26 11 24 260 ● 260 ● 14 6 30 140 ● - - 28 11 24 280 ● - - 15 6 30 150 ● - - 30 11 24 300 ● - - 16 8 32 160 ● - - 32 13 26 320 ● - - 17 8 32 170 ○ - - 33 13 26 330 ● 330 ○ 18 8 32 180 ● - - 36 13 26 360 ○ - - 20 8 32 200 ● 200 ● 38 17 28 380 ○ - - 21 9 22 210 ● - - 40 17 28 400 ● - - 22 9 22 220 ● - - 48 19 32 480 ○ - - 24 9 22 240 ● - - Prod. Gr. 116

Source: Hahn+Kolb Werkzeuge GmbH 152 Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

0151_EN_2018_KERN[21846844]-d.indd 152 12/17/2018 3:31:00 PM Countersinking tools \ BILZ countersink and holder

Holder for reverse counterbore for TUB exchangeable guide bush For reverse counterbore no. 11590-11593

Application: Advantage: For reverse counterbore no. 11590-11593. . High-quality ground steel ensures a long service life Execution: . High ﬂ exibility: one holder for various diameters . Precision-ground hardened steel with HB straight with any diameter size deliverable at short notice l shank . HB straight shank keeps the holder ﬁ rmly in place e in the spindle l2 d4g8 d2h8 d1e6 d3h6

1 2

Holder TUHW 1

Min./max. Ø d1 (mm) d2 (mm) d3 (mm) e (mm) l (mm) 11595... Ident. No. 21-24 mm 9 9 12 107 185 090 ● 25-30 mm 11 11 12 130 205 110 ● 31-36 mm 13 13 16 150 230 130 ● 37-43 mm 17 17 20 167 252 170 ○ 44-48 mm 19 19 20 183 272 190 ○ 49-54 mm 21 21 25 199 296 210 ○ Prod. Gr. 120 Guide bush for reverse counterbore For reverse counterbore no. 11595 090-210

Application: Advantage: For reverse counterbore no. 11595 090-210. . High-quality ground steel ensures a long service life Execution: d2h7

. Precision-ground, hardened steel *d4g8

Guide bush TUB

d4 d2 (mm) Bush length (mm) l2 (mm) 11595... Ident. No. 12-16 mm 9 30 30 009 ○ 14-20 mm 11 35 35 011 ○ 16-25 mm 13 40 40 013 ○ 22-30 mm 17 50 50 017 ○ 22-33 mm 19 55 55 019 ○ 24-36 mm 21 60 60 021 ○ Prod. Gr. 120 Replacement screws for guide bush For reverse counterbore no. 11595 009-021

Execution: . High-strength screws

Ident. No. 921 11595... ○ Prod. Gr. 120

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 153 Availability subject to country specific rules and regulations.

0151_EN_2018_KERN[21846844]-d.indd 153 12/17/2018 3:31:01 PM Countersinking tools \ BILZ countersink and holder

Holder for reverse counterbore with HB straight shank For reverse counterbore no. 11590-11593

Application: Advantage: For reverse counterbore no. 11590-11593. . High-quality ground steel ensures a long service life Execution: . HB straight shank keeps the holder ﬁ rmly in place . Precision-ground hardened steel with HB straight in the spindle l shank e l2 d4g8 d2h8 d1e6 d3h6

1 2

Holder TUHW 1

Min./max. Ø d1 (mm) d2 (mm) d3 (mm) e (mm) l (mm) 11595... Ident. No. 21-24 mm 9 10.5 12 107 185 091 ○ 21-24 mm 9 11 12 107 185 092 ○ 25-30 mm 11 12 12 130 205 111 ○ 25-30 mm 11 13 12 130 205 112 ○ 25-30 mm 11 13.5 12 130 205 113 ● 31-36 mm 13 15 16 150 230 131 ○ 31-36 mm 13 15.5 16 150 230 132 ○ 37-43 mm 17 19 20 167 252 171 ○ Prod. Gr. 120 Holder for reverse counterbore type TUH with straight shank For reverse counterbore no. 11590-11593

Application: Advantage: For reverse counterbore no. 11590-11593. . High-quality ground steel ensures a long service life Execution: . Precision-ground hardened steel with straight l shank e 57 d2e8 d3h9 d1e6

Min./max. Ø d1 (mm) d2 (mm) e (mm) l (mm) Sha Ø (mm) 11597... Ident. No. 10-13 mm 5 5.5 72 162 8 011 ● 10-13 mm 5 6.4 72 162 8 013 ○ 10-13 mm 5 6.6 72 162 8 015 ● 13.5-15 mm 6 8.4 70 162 10 019 ● 13.5-15 mm 6 9 70 162 10 021 ● 16-20 mm 8 9 88 182 12 027 ● 16-20 mm 8 11 88 182 12 033 ● 16-20 mm 8 13 88 182 12 039 ● 16-20 mm 8 14 88 182 12 041 ● 16-20 mm 8 13.5 88 182 12 043 ● Prod. Gr. 120

Source: Hahn+Kolb Werkzeuge GmbH 154 Technical data subject to change. www.iconridge.com Availability subject to country specific rules and regulations.

0154_EN_2018_KERN[21846848]-T.indd 154 12/17/2018 3:30:56 PM Countersinking tools \ BILZ countersink and holder

Holder for reverse counterbore type TUH with morse taper shank For reverse counterbore no. 11590-11593

Application: Advantage: For reverse counterbore no. 11590-11593. . High-quality ground steel ensures a long service life Execution: . Precision-ground hardened steel with Morse taper l e d2e8 d1e6

Min./ d1 (mm) d2 (mm) e (mm) l (mm) Morse 11597... Min./ d1 (mm) d2 (mm) e (mm) l (mm) Morse 11597... max. Ø taper Ident. No. max. Ø taper Ident. No. size size 10-13 25-30 mm 5 6.6 72 105 MK 1 016 ● mm 11 14 135 165 MK 3 062 ● 13.5-15 25-30 mm 6 9 70 105 MK 1 022 ● mm 11 17 135 165 MK 3 068 ○ 16-20 25-30 mm 8 11 88 125 MK 2 034 ● mm 11 18 135 165 MK 3 070 ● 16-20 31-36 mm 8 14 88 125 MK 2 042 ● mm 13 18 154 186 MK 3 082 ● 21-24 37-43 mm 9 11 118 145 MK 2 046 ○ mm 17 19 172 207 MK 3 098 ○ 21-24 37-43 mm 9 12 118 145 MK 2 048 ● mm 17 22 172 207 MK 3 104 ● 25-30 37-43 mm 11 12 135 165 MK 3 058 ○ mm 17 26 172 207 MK 3 112 ● 25-30 44-48 mm 11 13.5 135 165 MK 3 061 ○ mm 19 26 188 227 MK 3 128 ● Prod. Gr. 120

MORE THAN 60,000 PRODUCTS FOR MAXIMUM INNOVATION.

WE HAVE WHAT IT TAKES.

For a complete range of products that meet the toughest demands, visit www.iconridge.com

Source: Hahn+Kolb Werkzeuge GmbH Technical data subject to change. www.iconridge.com 155 Availability subject to country specific rules and regulations.

0154_EN_2018_KERN[21846848]-T.indd 155 12/17/2018 3:30:57 PM