DOCSLIB.ORG

General Notes

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
General Notes PARTS LIST ITEM QTY PART NUMBER MATERIAL DESCRIPTION 1 1 BASE CAST IRON 2 1 COLLAR SAE 1020 3 2 SET SCREW SAE 1016 4 1 SPECIAL KEY SAE 1020 5 1 VISE SCREW SAE 3140 6 2 SLIDE KEY SAE 1020 7 2 JAW PLATE SAE 3140 8 1 SLIDING JAW CAST IRON 9 4 COUNTER SUNK MACHINE MILD STEEL COUNTER SUNK MACHINE HEAD SCREW HEAD SCREW ANSI B18.6.3 - 1/4-20 UNC x 0.75, CRCTFCHMSTII(2) 11 1 HANDLE ROD COLD ROLLED STEEL 12 2 HANDLE BALL SAE 1020 13 2 TAPER PIN STEEL #000 LEGEND: DIAMETER MASTER ASSEMBLY R RADIUS SCALE 1 / 2 ° DEGREES COUNTERBORE DEPTH COUNTERSINK COURSE: DDGT 240 INVENTOR DRAWING NAME: GENERAL NOTES: MACHINE VISE TOLERANCES UNLESS SPECIFIED: FIG #: 14-71 ALL FILLETS AND ROUNDS ARE 1/8 DECIMAL INCHES: X = ±.020 DRAFTER: UNLESS NOTED OTHERWISE XX = ±.010 MMCDONOUGH DIGITAL DESIGN XXX = ±.005 GRAPHICS FRACTIONAL ±1/64" DATE: 10/1/2020 ANGLES±1 DEGREE TECHNOLOGY 32 SCALE: SURFACES AS NOTED WWW.DDGT.NET PAGE #: 1 OF 5 PARTS LIST ITEM QTY PART NUMBER 1 1 BASE 7 2 JAW PLATE 8 1 SLIDING JAW 7 9 4 COUNTER SUNK MACHINE HEAD SCREW 9 9 9 7 8 1 LEGEND: DIAMETER R RADIUS ° DEGREES STEP 1 STEP 2 COUNTERBORE SCALE 1 / 2 SCALE 1 / 2 DEPTH COUNTERSINK COURSE: DDGT 240 INVENTOR DRAWING NAME: MACHINE VISE GENERAL NOTES: TOLERANCES UNLESS SPECIFIED: FIG #: 14-71 DECIMAL INCHES: ALL FILLETS AND ROUNDS ARE 1/8 X = ±.020 DRAFTER: DIGITAL DESIGN XX = ±.010 MMCDONOUGH UNLESS NOTED OTHERWISE XXX = ±.005 GRAPHICS FRACTIONAL ±1/64" DATE: 10/1/2020 ANGLES±1 DEGREE TECHNOLOGY 32 SCALE: SURFACES AS NOTED WWW.DDGT.NET PAGE #: 2 OF 5 PARTS LIST 13 ITEM QTY PART NUMBER 12 8 1 1 BASE 2 1 COLLAR 10 3 2 SET SCREW 4 1 SPECIAL KEY 5 1 VISE SCREW 1 6 2 SLIDE KEY 7 2 JAW PLATE 8 1 SLIDING JAW 10 4 AS 2465 - 5/16 x 1 1/2 UNC 11 1 HANDLE ROD 12 2 HANDLE BALL 5 13 2 TAPER PIN 11 4 2 12 LEGEND: 12 DIAMETER R RADIUS 3 6 ° DEGREES COUNTERBORE STEP 4 DEPTH 13 SCALE 1 / 4 COUNTERSINK STEP 3 SCALE 1 / 2 COURSE: DDGT 240 INVENTOR DRAWING NAME: MACHINE VISE TOLERANCES UNLESS SPECIFIED: FIG #: 14-71 GENERAL NOTES: DECIMAL INCHES: X = ±.020 DRAFTER: ALL FILLETS AND ROUNDS ARE 1/8 XX = ±.010 MMCDONOUGH DIGITAL DESIGN XXX = ±.005 UNLESS NOTED OTHERWISE GRAPHICS FRACTIONAL ±1/64" DATE: 10/1/2020 ANGLES±1 DEGREE TECHNOLOGY 32 SCALE: SURFACES AS NOTED WWW.DDGT.NET PAGE #: 3 OF 5 7 1/4 PARTS LIST ITEM QTY PART NUMBER 1 1 BASE 1 1/8 5 2 1 COLLAR 4 1 SPECIAL KEY 7 2 JAW PLATE 33/64 13/16-20UNEF-3A,LH 5 2 3/4 4 23/32 3/32 X 1/8 13/16 SLOT 3/8 4X R1/4 4X 5/16 5/8 - 8 ACME 1 1/2 R11/16 COLLAR R1 3/8 1 1/4 4X R1 1/8 3/4 SCALE 1 : 1 1/8 R1/4 1 1/4-2OUNC-2B, 2X 1/4 FLAT HEAD 1 3/16 5/8 X2 1 3/4 MACHINE SCREW .502 .498 R1/4 3 5/16 2 3/4 2 3/16 3/4 2 1/4 1 11/16 1/8 1 1/16 1 3/4 LEGEND: 1.004 DIAMETER 5/16 7 1/4 1.000 R RADIUS BASE 1.254 1.250 1 1/2 5/8 3/16 ° DEGREES SCALE 1 / 2 COUNTERBORE JAW PLATE SCALE 1 / 2 DEPTH COUNTERSINK 25/64 COURSE: DDGT 240 INVENTOR DRAWING NAME: MACHINE VISE TOLERANCES UNLESS SPECIFIED: FIG #: DECIMAL INCHES: 14-71 R23/64 GENERAL NOTES: X = ±.020 DRAFTER: XX = ±.010 MMCDONOUGH .125 DIGITAL DESIGN .122 ALL FILLETS AND ROUNDS ARE 1/8 XXX = ±.005 SPECIAL KEY GRAPHICS FRACTIONAL ±1/64" DATE: 10/1/2020 UNLESS NOTED OTHERWISE ANGLES±1 DEGREE TECHNOLOGY 32 SCALE: SCALE 1 : 1 SURFACES AS NOTED WWW.DDGT.NET PAGE #: 4 OF 5 PARTS LIST .750-.748 X 1 3/16, FLAT BOTTOM ITEM QTY PART NUMBER 13/16 - 2OUNEF - 3B, LH 7/16 2 3/4 2 3/4 5 1 VISE SCREW R11/16 6 2 SLIDE KEY 1 9/16 1/8 A 1 1/2 R1/4 3/4 8 1 SLIDING JAW R1 3/8 11 1 HANDLE ROD 3/4 1 3/16 12 2 HANDLE BALL 1 3/4 1 3/4 .188 R1/4 .187 2 3/16 .504 - .507 1/4 - 2OUNC - 2B 1 1/2 1 3/8 A VIEW A-A 5/8 SCALE 1 / 2 .219 3/8 .217 .998 2 9/16 .996 2 5/16 1/8 .341 BB .340 13/16 .186 .131 R1/16 SLIDING JAW 1 3/32 5/32 .185 13/32 .128 5/8 ACME 3/8 1/2 SCALE 1 / 2 3/4 1/4 5/8 SLIDE KEY #25 (.1495), 1(1/16) SCALE 1 / 2 3 15/16 #12 (.216) - 24UNC - 2B , 3/4 1 3/16 6 1/4 11/32 7/32 ,3/8 1/2 VISE SCREW LEGEND: SCALE 1 / 2 DIAMETER 2X #37 DRILL AND .312 .311 R RADIUS REAM WITH PART 5 1/8 VIEW B-B ° DEGREES #9 IN PLACE SCALE 1 / 2 COUNTERBORE #000 TAPER PIN CLEAR THROUGH HANDLE ROD DEPTH 90° PEEN SMALL END OVER SCALE 1 / 2 COUNTERSINK COURSE: DDGT 240 INVENTOR DRAWING NAME: HANDLE BALL MACHINE VISE TOLERANCES UNLESS SPECIFIED: FIG #: SCALE 1 : 1 R3/8 DECIMAL INCHES: 14-71 X = ±.020 DRAFTER: XX = ±.010 MMCDONOUGH DIGITAL DESIGN XXX = ±.005 GENERAL NOTES: DATE: "M"(.295) 1/2 GRAPHICS FRACTIONAL ±1/64" 10/1/2020 ALL FILLETS AND ROUNDS ARE 1/8 ANGLES±1 DEGREE TECHNOLOGY 32 SCALE: SURFACES AS NOTED .313 - .312 UNLESS NOTED OTHERWISE WWW.DDGT.NET PAGE #: 5 OF 5.
Load more

Recommended publications
  • Tiny Vise Edge Clamps Truly Exert Down Thrust Force on the Workpiece, to Prevent It from Lifting
    +44 (0)1204 699959 [email protected] www.hyquip.co.uk/web/index TINY VISE ™ EDGE CLAMPS BODY: 1018 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH THRUST WASHER: 1144 STEEL, HEAT TREATED, BLACK OXIDE FINISH FLAT-HEAD SOCKET SCREW: STEEL, BLACK OXIDE FINISH An important clamping development! These mini edge clamps grip the side of a workpiece to keep the top clear for machining. Patented design features a slotted countersink to provide strong, reliable clamping force with the easy turn of a hex wrench. These compact clamps are ideal for fixturing multiple parts, small or large. Each clamp has both a serrated face (for maximum gripping) and a smooth face (to avoid marring finished parts). These clamps look so simple, but work amazingly well, with major advantages over earlier designs. Flat Jaw Patent number 5.624.106. Made in USA. (Reversible, Serrated or Smooth) Clamping force is applied by positive screw action with the easy turn of a hex wrench (not with an unreliable, unsafe eccentric cam as Clamping force is applied by positive screw action with used in other designs). A high-strength Flat- the easy turn of a hex wrench. Head Socket Screw engages a mating offset countersink to exert strong clamping force. Much more durable than other designs. Only Tiny Vise Edge Clamps truly exert down thrust force on the workpiece, to prevent it from lifting. A thrust washer underneath the clamp engages a mating offset countersink to provide downward action. Patented design features a slotted countersink. Available in a wide range of sizes, from a miniature #8-32 thread size, up to a powerful 1”-8 thread size with 2500 lbs clamping force.
    [Show full text]
  • MACHINE VISE SHEETS.Idw
    PARTS LIST ITEM QTY PART NUMBER MATERIAL DESCRIPTION 1 1 BASE CAST IRON 2 1 SLIDING JAW CAST IRON 3 2 JAW PLATE SAE 3140 4 1 VISE SCREW SAE 3140 5 1 COLLAR SAE 1020 6 1 SPECIAL KEY SAE 1020 7 1 HANDLE ROD COLD ROLLED STELL 8 2 HANDLE BALL SAE 1020 9 2 SLIDE KEY SAE 1020 10 2 SET SCREW SAE 1016 11 4 SLOTTED FLAT STEEL MILD ANSI B18.6.3 - 10-24 x COUNTERSUNK HEAD 5/8 MACHINE SCREW 12 2 TAPER PIN STANDARD #000 TAPER PIN LEGEND: DIAMETER R RADIUS ° DEGREES COUNTERBORE DEPTH COUNTERSINK MASTER ASSEMBLY SCALE 1 : 1 GENERAL NOTES: FILLEDS AND ROUNDS R.125 UNLESS OTHERWISE NOTED COURSE: DDGT240 INVENTOR NAME: MACHINE VISE TOLERANCE UNLESS SPECIFIED FIG #: DECIMAL INCHES: 14-17 X = ±.020 DRAFTER: XX = ±.010 P. FLORES DIGITAL DESIGN XXX = ±.005 GRAPHICS FRACTIONAL ±1/64" DATE: 10/5/2018 ANGLE ± 1 DEGREE TECHNOLOGY 32 SCALE: SURFACES AS NOTED WWW.DDGT.NET PAGE #: 1 OF 5 PARTS LIST ITEM QTY PART NUMBER 4X 5/16 4X R1 1/8 1 1 BASE 1 4 2 3/4 5/8-8ACME 4X R1/4 5 7 1/4 2X 1/4-20UNC-2B 5/8 5/8-8ACME B R11/16 1 1/4 5 1 1/2 5/8 R1/4 1 3/16 .502 1 3/4 1/8 .498 1 2 1/4 2 3/16 MACHINE VISE STEP 1 B 1 9/16 1 11/16 R1/4 SCALE 1 / 2 SECTION B-B 1 1/16 .502 SCALE 1 / 2 .627 .500 5/16 BASE .625 1.004 SCALE 1 / 2 1.000 1.254 1.250 COURSE: DDGT240 INVENTOR NAME: LEGEND: MACHINE VISE DIAMETER TOLERANCE UNLESS SPECIFIED FIG #: DECIMAL INCHES: 14-17 R RADIUS X = ±.020 DRAFTER: DIGITAL DESIGN XX = ±.010 P.
    [Show full text]
  • Manufacturing Glossary
    MANUFACTURING GLOSSARY Aging – A change in the properties of certain metals and alloys that occurs at ambient or moderately elevated temperatures after a hot-working operation or a heat-treatment (quench aging in ferrous alloys, natural or artificial aging in ferrous and nonferrous alloys) or after a cold-working operation (strain aging). The change in properties is often, but not always, due to a phase change (precipitation), but never involves a change in chemical composition of the metal or alloy. Abrasive – Garnet, emery, carborundum, aluminum oxide, silicon carbide, diamond, cubic boron nitride, or other material in various grit sizes used for grinding, lapping, polishing, honing, pressure blasting, and other operations. Each abrasive particle acts like a tiny, single-point tool that cuts a small chip; with hundreds of thousands of points doing so, high metal-removal rates are possible while providing a good finish. Abrasive Band – Diamond- or other abrasive-coated endless band fitted to a special band machine for machining hard-to-cut materials. Abrasive Belt – Abrasive-coated belt used for production finishing, deburring, and similar functions.See coated abrasive. Abrasive Cutoff Disc – Blade-like disc with abrasive particles that parts stock in a slicing motion. Abrasive Cutoff Machine, Saw – Machine that uses blade-like discs impregnated with abrasive particles to cut/part stock. See saw, sawing machine. Abrasive Flow Machining – Finishing operation for holes, inaccessible areas, or restricted passages. Done by clamping the part in a fixture, then extruding semisolid abrasive media through the passage. Often, multiple parts are loaded into a single fixture and finished simultaneously. Abrasive Machining – Various grinding, honing, lapping, and polishing operations that utilize abrasive particles to impart new shapes, improve finishes, and part stock by removing metal or other material.See grinding.
    [Show full text]
  • Simple Machines
    Name: _______________________________________ Simple Machines There are six basic types of simple machines: inclined plane, wedge, screw, wheel and axle, lever, and pulley. 1. What is the man doing with the crow bar? Which type of simple machine is he using? ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ 2. Why might this woman be drilling a hole? Which type of simple machine will she probably insert in the hole when she's done drilling? ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ 6. What is this man doing? What type of simple machine is the ladder that he is standing on? ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ Super Teacher Worksheets - www.superteacherworksheets.com 4. What might the woman doing with the cord, wheel and hook? Which basic simple machine is she using? ____________________________________________________________ ____________________________________________________________ ____________________________________________________________
    [Show full text]
  • OPERATOR's MANUAL 9 In. (229 Mm) BAND SAW BS902
    OPERATOR'S MANUAL 9 in. (229 mm) BAND SAW BS902 Your new Band Saw has been engineered and manufactured to Ryobi's high standards for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Thank you for buying a Ryobi tool. SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS Introduction ......................................................................................................................................................................2 Rules for Safe Operation ............................................................................................................................................. 3-5 Electrical...........................................................................................................................................................................6 Glossary of Terms ............................................................................................................................................................7 Features ....................................................................................................................................................................... 7-9 Unpacking ........................................................................................................................................................................9
    [Show full text]
  • Link Industries CUTTING TOOL CATALOG (800) 626-9460 | Link Industries
    Link Industries CUTTING TOOL CATALOG (800) 626-9460 | www.linkcuttingtools.com Link Industries Proud To Say American Made And Family Owned For Over 80 Years Focusing on Centerdrills, Countersinks, Counterbores and Custom Made-to-order Tools, LINK is dedicated to producing the finest precision High-Speed Steel and Carbide cutting tools available. As part of an Engineering focused company, LINK has the technical capability to provide each customer with the best tooling solution for their application. A brief outline of Link Industries’ history: 1935 – Herbert Link established the Link Engineering Company in Detroit, Michigan. 1948 – Link Industries developed a unique design and process to manufacture HSS Centerdrills. 1952 – Company relocated its cutting tool manufacturing operations to Indian River, MI. 1968 – 1st building expansion for more manufacturing and office space. 1985 – 2nd building expansion; including dedicated Quality and Inventory areas. 2001 – ISO 9001:2008 Certification achieved. 2014 – Laser marking introduced; LEAN Manufacturing begins implementation. 2015 – 1st 5-Axis CNC machine purchased; new tool packaging/labels launched. 2016 – 2nd 5-Axis CNC machine purchased; new Cutting Tool Catalog released. 2017 – Patent Pending Cross-LINK Drills introduced; new Optical Cutting Tool inspection system purchased. For additional information: www.linkcuttingtools.com ISO 9001 CERTIFIED Link Industries CENTERDRILLS, COUNTERSINKS & COUNTERBORES MADE IN THE USA for over 80 years Table of Contents Centerdrills ................................
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • Punching Tools ​
    TruServices Punching Tools Order easily – with the correct specifica- tions for the right tool. Have you thought of everything? Machine type Machine number Tool type Dimensions or drawings in a conventional CAD format (e.g. DXF) Sheet thickness Material Quantity Desired delivery date Important ordering specifications ! Please observe the "Important ordering specifications" on each product page as well. Order your punching tools securely and conveniently 24 hours a day, 7 days a week in our E-Shop at: www.trumpf.com/mytrumpf Alternatively, practical inquiry and order forms are available to you in the chapter "Order forms". TRUMPF Werkzeugmaschinen GmbH + Co. KG International Sales Punching Tools Hermann-Dreher-Strasse 20 70839 Gerlingen Germany E-mail: [email protected] Homepage: www.trumpf.com Content Order easily – with the correct specifica- General information tions for the right tool. TRUMPF System All-round Service Industry 4.0 MyTRUMPF 4 Have you thought of everything? Machine type Punching Machine number Classic System MultiTool Tool type Cluster tools MultiUse Dimensions or drawings in a conventional CAD format (e.g. DXF) 12 Sheet thickness Material Cutting Quantity Slitting tool Film slitting tool Desired delivery date MultiShear 44 Important ordering specifications ! Please observe the "Important ordering specifications" on each product page as well. Forming Countersink tool Thread forming tool Extrusion tool Cup tool 58 Marking Order your punching tools securely and conveniently 24 hours a day, 7 days a week in our E-Shop at: Center punch tool Marking tool Engraving tool Embossing tool www.trumpf.com/mytrumpf 100 Alternatively, practical inquiry and order forms are available to you in the chapter "Order forms".
    [Show full text]
  • Snap on On-Site Power Generation Tool Kit Price $ 3095 Sales Tax $185.70 Total $3280.70 Student Name Student ID Email
    Pennsylvania College of Technology Snap On On-Site Power Generation 1650 Pry bar, 16" 211FY Socket Set, Shallow, 12-Pt 3/8 Drive, (11 pc)(1/4" to 7/8") 211SFSY Socket Set, Deep, 6-Pt 3/8 drive, (11 pcs.) (1/4" to 7/8") 212SFSMY Socket Set, Metric, Deep, 6-Pt (12 pcs.) 3/8 drive (8 to 9 mm) 313SMYA Socket Set, Metric, Deep, 12-Pt (13 pcs.) 1/2 drive (12-24 mm) 313SWMYA Socket Set, Metric, Shallow, 12-Pt (13 pcs.) 1/2 drive (12-24 mm) 313SYA Socket Set, Deep, 12-Pt (13 pcs.) 1/2 drive (3/8" to 1 1/8") 317MPC General Set, Standard Shallow, 12-Pt (17 pcs.) 1/2 drive (3/8" to 1 1/8") AWP120 Adjustable Joint, Straight Serrated Jaws, 12 3/4" BP24B Hammer, Ball Peen, 24 oz. MAGM2A03H Flashlight ( was ECF2B discontinued) OEX709B Set, Wrench, Combination, 12-Pt (9 pcs. in tray) (3/8" to 7/8") OEXM710B Set, Wrench, Combination, Metric, 12-Pt (10 pcs. in tray) (10-19 mm) SHDX60R Set Screwdriver, Combination, Instinct Hard Handle, Red 6 pcs. QD3R250 Torque Wrench, Adj. Click-type, Fixed-Ratchet PPC710BK Punch and Chisel Set, 11 pc. (Center/Pin/Starter) FXK11 Extension, Knurled, Friction Ball, 11" 3/8 Drive PPB1226A Punch, Drift, Bronze, 13/16" point, 12 FXK3 Extension, Knurled, Friction Ball, 3" GLASS1BK Glasses, Safety, Clear Lens/Black Frames HBFE24 Hammer, Dead Blow, Soft Grip, 24 oz. OEX30B 15/16" Standard Combination Wrench OEX32B 1" Standard Combination Wrench OEX36B 1 1/8" Standard Combination Wrench OEX40B 1 1/4" Standard Combination Wrench OEXM80B 8mm Metric Combination Wrench PK23A Scraper PL300CF Set, Cutters/Pliers, 3 pcs.
    [Show full text]
  • Split-Top Roubo Bench Plans
    SPLIT-TOP ROUBO BENCH PLANS Design, Construction Notes and Techniques Copyright Benchcrafted 2009-2014 · No unauthorized reproduction or distribution. You may print copies for your own personal use only. 1 Roubo’s German Cabinetmaker’s Bench from “L’Art Du Menuisier” ~ Design ~ The Benchcrafted Split-Top Roubo Bench is largely based on the workbenches documented by French author André Roubo in his 18th-century monumental work “L’Art Du Menuisier” (“The Art of the Joiner”). The Split-Top bench design primarily grew out of Roubo’s German cabinetmaker’s bench documented in volume three of Roubo’s series. Author and bench historian Christopher Schwarz, who has re-popularized several classic bench designs of late, and most notably the Roubo, was also an influence through his research and writings. We built a version of Roubo’s German bench and it served as a platform from which the Split-Top Roubo was conceived. We were attracted to the massive nature of Roubo’s German design and were interested to see how the sliding leg vise in particular functioned in day-to-day use. From the start we opted to do away with the traditional sliding-block tail vise, with its pen- chant for sagging and subsequent frustration. In the process of the bench’s development the Benchcrafted Tail Vise emerged and it has proven to be an excellent workholding solution, solving all of the problems of traditional tail vises without sacrificing much in terms of function, i.e., the ability to clamp between open-front jaws. For all the aggrava- 2 tion that the Benchcrafted Tail Vise eliminates, that feature isn’t missed all that much.
    [Show full text]
  • Installing a Bench Vise Give Your Workbench the Holding Power It Deserves
    Installing a Bench Vise Give your workbench the holding power it deserves. By Craig Bentzley Let’s face it; a workbench This is the best approach for above. Regardless of the type of without vises is basically just an a face vise, because the entire mounting, have your vise(s) in assembly table. Vises provide the length of a board secured for hand before you start so you can muscle for securing workpieces edge work will contact the bench determine the size of the spacers, for planing, sawing, routing, edge for support and additional jaws, and hardware needed for and other tooling operations. clamping, as shown in the photo a trouble-free installation. Of the myriad commercial models, the venerable Record vise is one that has stood the Vise Locati on And Selecti on test of time, because it’s simple A vise’s locati on on the bench determines what it’s called. to install, easy to operate, Face vises are att ached on the front, or face, of the bench; end and designed to survive vises are installed on the end. The best benches have both, generations of use. Although but if you can only aff ord one, I’d go for a face vise initi ally. it’s no longer in production, Right-handers should mount a face vise at the far left of the several clones are available, bench’s front edge and an end vise on the end of the bench including the Eclipse vise, which at the foremost right-hand corner. Southpaws will want to I show in this article.
    [Show full text]
  • Precision Tools for Milling, Drilling and Cutting of Fiber-Reinforced Plastics
    MAGENTIFY COMPOSITE PROCESSING COMPOSITE MACHINING Precision tools for milling, drilling and cutting of fiber-reinforced plastics www.leuco.com FIBER-REINFORCED PLASTICS & WOOD WHY LEUCO? DRILL BITS & COUNTERSINKS Drilling into fiber-reinforced plastics leads to significant wear of common carbide drill bits or delamination of the component. LEUCO offers a special patented drill bit geometry in tungsten carbide, combining long tool life with excellent machining quality. Its range also includes dia- mond-tipped drill bits for long edge life in abrasive materials. MILLING CUTTERS Milling of fiber-reinforced plastics is done in many industries, with very different requirements for milling tools. What material is to be machined? What machining method is to be used? Using robust and rigid CNC machines or more unstable robots? LEUCO offers a vast range of shank-type cutters for ma- chining composites. The range of tools extends from simple double-edge shank-type cutters for standard applications to the patented p-System cutter fea- turing excellent edge life and cutting quality. This range is supplemented by cutters with a large number of teeth, which allow high cutting speeds and can therefore be used very economically. SAW BLADES Sawing is the most effective machining method for long straight contours. This method is still rather unknown for fiber-reinforced plastics. LEUCO saw blades achieve good cutting quality at high feed rates. This combination is made possible by the saw tooth geometry of LEUCO nn-System and g5-System tools, which allows for scoring. ACCESSORIES But tools are not alone responsible for successful machining. Often, it is only by intelligently combining tools, chucks and, if applicable, aggregate technology that the optimal and most economical machining results are achieved.
    [Show full text]