DOCSLIB.ORG

“THE SAW THAT DOES IT ALL” PVC COMPOSITE Wood ALUMINUM

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
“THE SAW THAT DOES IT ALL” PVC COMPOSITE Wood ALUMINUM “The Standard Fabrication Machine for your Custom Profiles” PVC, Aluminum, Composite & Wood Profile Processing Just add your custom Solution Guides & Fixtures Up To 14 Axis and 8 Spindles Flexible Autoloader Size and Capacity All Four Sides Automatic Drilling, Routing & Down Cut Miter Saw 45°-135° “THE SAW THAT DOES IT ALL” PVC COMPOSITE Wood ALUMINUM Automatic Profile Drilling & Routing on Four Sides with Down Cut Miter Saw 45-135° Automatic Servo Top Axis Assembly Driven Miter Saw 45- XYZ-150mm Stroke 135 Degree One Spindle 18000 RPM 2.2 KW Saw Blade 16 Inch Back Axis Assembly XYZ-150mm Stroke One Spindle 18000 RPM 2.2 KW Bottom Axis Assembly Front Axis Assembly XYZ-150mm Stroke XYZ-150mm Stroke One Spindle One Spindle 18000 RPM 18000 RPM 2.2 KW 2.2 KW Configure Machine with any Combination of Axis (2-12) and Spindles (1-8) Automatic Servo Top Axis Assembly Driven Miter Saw 45- XZ-150mm Stroke 135 Degree One Spindle 18000 RPM 2.2 KW Saw Blade 16 Inch Back Axis Assembly XZ-150mm Stroke One Spindle 18000 RPM 2.2 KW Bottom Axis Assembly Front Axis Assembly XZ-150mm Stroke XZ-150mm Stroke One Spindle One Spindle 18000 RPM 18000 RPM 2.2 KW 2.2 KW Configure Machine with any Combination of Axis (2-12) and Spindles (1-8) Automatic Servo Top Axis Assembly Driven Miter Saw 45- XZZ-150mm Stroke 135 Degree Two Spindles 18000 RPM 2.2 KW Saw Blade 16 Inch Back Axis Assembly XXZ-150mm Stroke Two Spindles 18000 RPM 2.2 KW Bottom Axis Assembly Front Axis Assembly XZZ-150mm Stroke XXZ-150mm Stroke Two Spindles Two Spindles 18000 RPM 18000 RPM 2.2 KW 2.2 KW Configure Machine with any Combination of Axis (2-12) and Spindles (1-8) RhinoFab1400 Fabrication System Specifications Units Data Cutting Unit Down Cut Miter Saw - Yes • Fully automatic profile drilling, routing & Cutting Angle Degree 45-135 miter cutting. Carbide Blade Diameter Inch 16 • For precise, high speed cutting, drilling & Saw Motor Power Hp 4 routing of Vinyl, Fibrex, Aluminum & Axis Travel Wood profiles. Top/Bottom -X Axis Inch 5.9 • Drill, Rout & Countersink on Top, Top/Bottom Y-Axis Inch 5.9 Bottom, Front & Back of profile. Top/Bottom -Z Axis Inch 5.9 Front/Back X-Axis Inch 5.9 • Completely enclosed cutting area. Front/Back Y-Axis Inch 5.9 • Two Vacuum ports 6” dia. for dust ex- Front/Back Z-Axis Inch 4.9 traction. Infeed Pusher Y-Axis Inch 417 • Fully integrates with Rhino Autoloader Infeed Aoutoloader X-Axis Inch 60-120 or single profile pusher with roller ta- Positioning Speed bles. All X, Y, Z-Axis Speed in/sec 0-100 • The RhinoFab1400 can take varies cut Infeed Pusher Y-Axis Speed in/sec 0-30 list formats. IInfeed Aoutoloader X-Axis Speed in/sec 0-30 • Complete Optimization & Drop Control. Saw Stroke Speed in/sec 0-6 Saw Rotation Speed in/sec 0-300 • Servo controlled saw feed. Drilling/Milling Unit • Zero backlash gearbox, servo controlled Electrospindle Motor Power KW 2.2 rotation. Drill/Milling Speed RPM 0-18000 • Automatic drill bit, router bit & saw Tool Holder, HSK32, ER25 Inch 0.060 - 0.65 blade lubrication. Profile Cutting Capacity 90 Degree, H x W Inch 3.5 x 6.0 • Composite Back Fence Rollers and Guide Pads for gentle profile handling 45-135 Degree Miter, H x W Inch 3.5 x 5.0 Coolant System Saw Nozzle 3X QTY 1 Drill/Mill Nozzle 1X QTY 4 Automatic Central Lubrication System QTY 1 Contact Bill Cole at Glazier Center Dimension/Weight (607) 698-4430 for more RhinoFab1400 Unit Lbs 1760 information. Width Inch 60 Depth Inch 66 Height Inch 76 .
Load more

Recommended publications
  • Tiny Vise Edge Clamps Truly Exert Down Thrust Force on the Workpiece, to Prevent It from Lifting
    +44 (0)1204 699959 [email protected] www.hyquip.co.uk/web/index TINY VISE ™ EDGE CLAMPS BODY: 1018 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH THRUST WASHER: 1144 STEEL, HEAT TREATED, BLACK OXIDE FINISH FLAT-HEAD SOCKET SCREW: STEEL, BLACK OXIDE FINISH An important clamping development! These mini edge clamps grip the side of a workpiece to keep the top clear for machining. Patented design features a slotted countersink to provide strong, reliable clamping force with the easy turn of a hex wrench. These compact clamps are ideal for fixturing multiple parts, small or large. Each clamp has both a serrated face (for maximum gripping) and a smooth face (to avoid marring finished parts). These clamps look so simple, but work amazingly well, with major advantages over earlier designs. Flat Jaw Patent number 5.624.106. Made in USA. (Reversible, Serrated or Smooth) Clamping force is applied by positive screw action with the easy turn of a hex wrench (not with an unreliable, unsafe eccentric cam as Clamping force is applied by positive screw action with used in other designs). A high-strength Flat- the easy turn of a hex wrench. Head Socket Screw engages a mating offset countersink to exert strong clamping force. Much more durable than other designs. Only Tiny Vise Edge Clamps truly exert down thrust force on the workpiece, to prevent it from lifting. A thrust washer underneath the clamp engages a mating offset countersink to provide downward action. Patented design features a slotted countersink. Available in a wide range of sizes, from a miniature #8-32 thread size, up to a powerful 1”-8 thread size with 2500 lbs clamping force.
    [Show full text]
  • MACHINE VISE SHEETS.Idw
    PARTS LIST ITEM QTY PART NUMBER MATERIAL DESCRIPTION 1 1 BASE CAST IRON 2 1 SLIDING JAW CAST IRON 3 2 JAW PLATE SAE 3140 4 1 VISE SCREW SAE 3140 5 1 COLLAR SAE 1020 6 1 SPECIAL KEY SAE 1020 7 1 HANDLE ROD COLD ROLLED STELL 8 2 HANDLE BALL SAE 1020 9 2 SLIDE KEY SAE 1020 10 2 SET SCREW SAE 1016 11 4 SLOTTED FLAT STEEL MILD ANSI B18.6.3 - 10-24 x COUNTERSUNK HEAD 5/8 MACHINE SCREW 12 2 TAPER PIN STANDARD #000 TAPER PIN LEGEND: DIAMETER R RADIUS ° DEGREES COUNTERBORE DEPTH COUNTERSINK MASTER ASSEMBLY SCALE 1 : 1 GENERAL NOTES: FILLEDS AND ROUNDS R.125 UNLESS OTHERWISE NOTED COURSE: DDGT240 INVENTOR NAME: MACHINE VISE TOLERANCE UNLESS SPECIFIED FIG #: DECIMAL INCHES: 14-17 X = ±.020 DRAFTER: XX = ±.010 P. FLORES DIGITAL DESIGN XXX = ±.005 GRAPHICS FRACTIONAL ±1/64" DATE: 10/5/2018 ANGLE ± 1 DEGREE TECHNOLOGY 32 SCALE: SURFACES AS NOTED WWW.DDGT.NET PAGE #: 1 OF 5 PARTS LIST ITEM QTY PART NUMBER 4X 5/16 4X R1 1/8 1 1 BASE 1 4 2 3/4 5/8-8ACME 4X R1/4 5 7 1/4 2X 1/4-20UNC-2B 5/8 5/8-8ACME B R11/16 1 1/4 5 1 1/2 5/8 R1/4 1 3/16 .502 1 3/4 1/8 .498 1 2 1/4 2 3/16 MACHINE VISE STEP 1 B 1 9/16 1 11/16 R1/4 SCALE 1 / 2 SECTION B-B 1 1/16 .502 SCALE 1 / 2 .627 .500 5/16 BASE .625 1.004 SCALE 1 / 2 1.000 1.254 1.250 COURSE: DDGT240 INVENTOR NAME: LEGEND: MACHINE VISE DIAMETER TOLERANCE UNLESS SPECIFIED FIG #: DECIMAL INCHES: 14-17 R RADIUS X = ±.020 DRAFTER: DIGITAL DESIGN XX = ±.010 P.
    [Show full text]
  • Manufacturing Glossary
    MANUFACTURING GLOSSARY Aging – A change in the properties of certain metals and alloys that occurs at ambient or moderately elevated temperatures after a hot-working operation or a heat-treatment (quench aging in ferrous alloys, natural or artificial aging in ferrous and nonferrous alloys) or after a cold-working operation (strain aging). The change in properties is often, but not always, due to a phase change (precipitation), but never involves a change in chemical composition of the metal or alloy. Abrasive – Garnet, emery, carborundum, aluminum oxide, silicon carbide, diamond, cubic boron nitride, or other material in various grit sizes used for grinding, lapping, polishing, honing, pressure blasting, and other operations. Each abrasive particle acts like a tiny, single-point tool that cuts a small chip; with hundreds of thousands of points doing so, high metal-removal rates are possible while providing a good finish. Abrasive Band – Diamond- or other abrasive-coated endless band fitted to a special band machine for machining hard-to-cut materials. Abrasive Belt – Abrasive-coated belt used for production finishing, deburring, and similar functions.See coated abrasive. Abrasive Cutoff Disc – Blade-like disc with abrasive particles that parts stock in a slicing motion. Abrasive Cutoff Machine, Saw – Machine that uses blade-like discs impregnated with abrasive particles to cut/part stock. See saw, sawing machine. Abrasive Flow Machining – Finishing operation for holes, inaccessible areas, or restricted passages. Done by clamping the part in a fixture, then extruding semisolid abrasive media through the passage. Often, multiple parts are loaded into a single fixture and finished simultaneously. Abrasive Machining – Various grinding, honing, lapping, and polishing operations that utilize abrasive particles to impart new shapes, improve finishes, and part stock by removing metal or other material.See grinding.
    [Show full text]
  • OPERATOR's MANUAL 9 In. (229 Mm) BAND SAW BS902
    OPERATOR'S MANUAL 9 in. (229 mm) BAND SAW BS902 Your new Band Saw has been engineered and manufactured to Ryobi's high standards for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Thank you for buying a Ryobi tool. SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS Introduction ......................................................................................................................................................................2 Rules for Safe Operation ............................................................................................................................................. 3-5 Electrical...........................................................................................................................................................................6 Glossary of Terms ............................................................................................................................................................7 Features ....................................................................................................................................................................... 7-9 Unpacking ........................................................................................................................................................................9
    [Show full text]
  • Link Industries CUTTING TOOL CATALOG (800) 626-9460 | Link Industries
    Link Industries CUTTING TOOL CATALOG (800) 626-9460 | www.linkcuttingtools.com Link Industries Proud To Say American Made And Family Owned For Over 80 Years Focusing on Centerdrills, Countersinks, Counterbores and Custom Made-to-order Tools, LINK is dedicated to producing the finest precision High-Speed Steel and Carbide cutting tools available. As part of an Engineering focused company, LINK has the technical capability to provide each customer with the best tooling solution for their application. A brief outline of Link Industries’ history: 1935 – Herbert Link established the Link Engineering Company in Detroit, Michigan. 1948 – Link Industries developed a unique design and process to manufacture HSS Centerdrills. 1952 – Company relocated its cutting tool manufacturing operations to Indian River, MI. 1968 – 1st building expansion for more manufacturing and office space. 1985 – 2nd building expansion; including dedicated Quality and Inventory areas. 2001 – ISO 9001:2008 Certification achieved. 2014 – Laser marking introduced; LEAN Manufacturing begins implementation. 2015 – 1st 5-Axis CNC machine purchased; new tool packaging/labels launched. 2016 – 2nd 5-Axis CNC machine purchased; new Cutting Tool Catalog released. 2017 – Patent Pending Cross-LINK Drills introduced; new Optical Cutting Tool inspection system purchased. For additional information: www.linkcuttingtools.com ISO 9001 CERTIFIED Link Industries CENTERDRILLS, COUNTERSINKS & COUNTERBORES MADE IN THE USA for over 80 years Table of Contents Centerdrills ................................
    [Show full text]
  • Punching Tools ​
    TruServices Punching Tools Order easily – with the correct specifica- tions for the right tool. Have you thought of everything? Machine type Machine number Tool type Dimensions or drawings in a conventional CAD format (e.g. DXF) Sheet thickness Material Quantity Desired delivery date Important ordering specifications ! Please observe the "Important ordering specifications" on each product page as well. Order your punching tools securely and conveniently 24 hours a day, 7 days a week in our E-Shop at: www.trumpf.com/mytrumpf Alternatively, practical inquiry and order forms are available to you in the chapter "Order forms". TRUMPF Werkzeugmaschinen GmbH + Co. KG International Sales Punching Tools Hermann-Dreher-Strasse 20 70839 Gerlingen Germany E-mail: [email protected] Homepage: www.trumpf.com Content Order easily – with the correct specifica- General information tions for the right tool. TRUMPF System All-round Service Industry 4.0 MyTRUMPF 4 Have you thought of everything? Machine type Punching Machine number Classic System MultiTool Tool type Cluster tools MultiUse Dimensions or drawings in a conventional CAD format (e.g. DXF) 12 Sheet thickness Material Cutting Quantity Slitting tool Film slitting tool Desired delivery date MultiShear 44 Important ordering specifications ! Please observe the "Important ordering specifications" on each product page as well. Forming Countersink tool Thread forming tool Extrusion tool Cup tool 58 Marking Order your punching tools securely and conveniently 24 hours a day, 7 days a week in our E-Shop at: Center punch tool Marking tool Engraving tool Embossing tool www.trumpf.com/mytrumpf 100 Alternatively, practical inquiry and order forms are available to you in the chapter "Order forms".
    [Show full text]
  • Installing a Bench Vise Give Your Workbench the Holding Power It Deserves
    Installing a Bench Vise Give your workbench the holding power it deserves. By Craig Bentzley Let’s face it; a workbench This is the best approach for above. Regardless of the type of without vises is basically just an a face vise, because the entire mounting, have your vise(s) in assembly table. Vises provide the length of a board secured for hand before you start so you can muscle for securing workpieces edge work will contact the bench determine the size of the spacers, for planing, sawing, routing, edge for support and additional jaws, and hardware needed for and other tooling operations. clamping, as shown in the photo a trouble-free installation. Of the myriad commercial models, the venerable Record vise is one that has stood the Vise Locati on And Selecti on test of time, because it’s simple A vise’s locati on on the bench determines what it’s called. to install, easy to operate, Face vises are att ached on the front, or face, of the bench; end and designed to survive vises are installed on the end. The best benches have both, generations of use. Although but if you can only aff ord one, I’d go for a face vise initi ally. it’s no longer in production, Right-handers should mount a face vise at the far left of the several clones are available, bench’s front edge and an end vise on the end of the bench including the Eclipse vise, which at the foremost right-hand corner. Southpaws will want to I show in this article.
    [Show full text]
  • Precision Tools for Milling, Drilling and Cutting of Fiber-Reinforced Plastics
    MAGENTIFY COMPOSITE PROCESSING COMPOSITE MACHINING Precision tools for milling, drilling and cutting of fiber-reinforced plastics www.leuco.com FIBER-REINFORCED PLASTICS & WOOD WHY LEUCO? DRILL BITS & COUNTERSINKS Drilling into fiber-reinforced plastics leads to significant wear of common carbide drill bits or delamination of the component. LEUCO offers a special patented drill bit geometry in tungsten carbide, combining long tool life with excellent machining quality. Its range also includes dia- mond-tipped drill bits for long edge life in abrasive materials. MILLING CUTTERS Milling of fiber-reinforced plastics is done in many industries, with very different requirements for milling tools. What material is to be machined? What machining method is to be used? Using robust and rigid CNC machines or more unstable robots? LEUCO offers a vast range of shank-type cutters for ma- chining composites. The range of tools extends from simple double-edge shank-type cutters for standard applications to the patented p-System cutter fea- turing excellent edge life and cutting quality. This range is supplemented by cutters with a large number of teeth, which allow high cutting speeds and can therefore be used very economically. SAW BLADES Sawing is the most effective machining method for long straight contours. This method is still rather unknown for fiber-reinforced plastics. LEUCO saw blades achieve good cutting quality at high feed rates. This combination is made possible by the saw tooth geometry of LEUCO nn-System and g5-System tools, which allows for scoring. ACCESSORIES But tools are not alone responsible for successful machining. Often, it is only by intelligently combining tools, chucks and, if applicable, aggregate technology that the optimal and most economical machining results are achieved.
    [Show full text]
  • SHAKERWORKBENCH Design, Construction Notes and Techniques
    BENCHCRAFTED · SHAKER BENCH PLANS SHAKERWORKBENCH Design, Construction Notes and Techniques “Don't make something unless it is both necessary and useful; but if it is both neces- sary and useful, don't hesitate to make it beautiful." –Shaker Dictum Introduction and Design: Ron Brese Construction Notes and Techniques: Jameel Abraham Measured Drawings: Louis Bois Copyright Benchcrafted 2011·2014 No unauthorized reproduction or distribution. You may print copies for your own personal use only. 1 BENCHCRAFTED · SHAKER BENCH PLANS · INTRODUCTION & DESIGN · “Whatever perfections you may have, be assured people will find them out, but whether they do or not, nobody will take them on your word” Canterbury, New Hampshire, 1844 When I first laid eyes on the workbench at the Hancock Shaker Museum in Pittsfield, Massachusetts I had a pretty good idea of the configuration of my next workbench. I think it would be safe to say that I was inspired. However, designing a workbench that is inspired by a Shaker icon can be intimidating as well. I had to do justice to the original and keep in mind what might be considered acceptable. Luckily, most are aware that the Shakers were quite accepting of new technologies that could be practically applied, so this did allow a fair amount of leeway in regards to using more recent workholding devices on this bench. In the end, I did want the look to be very representative of the Shaker Ideal. “‘Tis a Gift to Be Simple” is an over used Shaker pronouncement, however I often think it’s meaning is misinterpreted. I believe it means having freedom from making things unnecessarily complicated.
    [Show full text]
  • Woodworking Glossary, a Comprehensive List of Woodworking Terms and Their Definitions That Will Help You Understand More About Woodworking
    Welcome to the Woodworking Glossary, a comprehensive list of woodworking terms and their definitions that will help you understand more about woodworking. Each word has a complete definition, and several have links to other pages that further explain the term. Enjoy. Woodworking Glossary A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | #'s | A | A-Frame This is a common and strong building and construction shape where you place two side pieces in the orientation of the legs of a letter "A" shape, and then cross brace the middle. This is useful on project ends, and bases where strength is needed. Abrasive Abrasive is a term use to describe sandpaper typically. This is a material that grinds or abrades material, most commonly wood, to change the surface texture. Using Abrasive papers means using sandpaper in most cases, and you can use it on wood, or on a finish in between coats or for leveling. Absolute Humidity The absolute humidity of the air is a measurement of the amount of water that is in the air. This is without regard to the temperature, and is a measure of how much water vapor is being held in the surrounding air. Acetone Acetone is a solvent that you can use to clean parts, or remove grease. Acetone is useful for removing and cutting grease on a wooden bench top that has become contaminated with oil. Across the Grain When looking at the grain of a piece of wood, if you were to scratch the piece perpendicular to the direction of the grain, this would be an across the grain scratch.
    [Show full text]
  • Woodworking Glossary
    Woodworking Glossary Abrasives Any substance such as aluminum oxide, silicon carbide, garnet, emery, flint or similar materials that is used to abrade or sand wood, steel or other materials. Substances such as India, Arkansas, crystolon, silicon carbide and waterstones used to sharpen steel edged tools are included. Alternating Grain Direction The process of gluing-up or laminating wood for project components with alternating pieces having the grain running perpendicular to one another (as opposed to parallel). Usually, this practice is enlisted to provide superior strength in a project that is expected to be under stress. It is also used occasionally for decorative purposes. Bevel An angular edge on a piece of stock, usually running from the top or face surface to the adjacent edge or the opposing (bottom) surface. In most cases, bevels are formed for joinery, but are also occasionally used for decorative purposes. Chamfer A slight angular edge that is formed on a piece of stock for decorative purposes or to eliminate sharp corners. Chamfers are similar to bevels but are less pronounced and do not go all the way from one surface to another. Compound Cutting The act of cutting out a project or project component (usually with a bandsaw) to create a three-dimensional or “sculpted” shape. This is accomplished by cutting one profile, taping scraps back in place, and rotating the workpiece to cut a second profile, usually 90° to the first. Compound Miter A combination miter and bevel cut. Generally a compound miter is used in building shadow box picture frames and similar projects where angled or “deep set” project sides are desired.
    [Show full text]
  • Countersinks
    Specialty Tools Gold COUNTERSINKS & Type 82-AG -Piloted Type 82-AG -Pilotless Type 90-AG -Deburring Type 82-AG Chatter proof ™ Countersinks Type 90-AG Chatter proof ™ Deburring Tools Black Special Hi-Molybdenum tool steel, gold surface treated for maximum lubricity. These high performance, flute-less tools are: Type 82-AG - Piloted • Free cutting - for ease of use. • Designed for fast stock removal. • Chatter proof - for a micro smooth finish. • Easily resharpened - for extra long life. • Available in a wide selection of styles. Type 82-AG - Pilotless • Recommended for smooth finishes on metal, plastic and wood applications. • Made in the U.S.A. Type 90-AG - Deburring TYPE 82-AG 82º PILOTED COUNTERSINK Shank Overall Part Screw Diameter Length No. No. Size Style Size A B C D E F per/pack 67010 CS1/4 1 1/4 1/4 3/8 2 33/64 1 5/32 1 Countersinks 67020 CS1/4A 1 1/4 17/64 3/8 2 33/64 1 5/32 1 - 67030 CS5/16 1 5/16 5/16 3/8 2-3/16 41/64 1-3/16 5/32 1 67040 CS5/16A 1 5/16 21/64 3/8 2-3/16 41/64 1-3/16 5/32 1 67050 CS3/8 1 3/8 3/8 1/2 2-5/8 49/64 1-3/8 5/32 1 67060 CS3/8A 1 3/8 25/64 1/2 2-5/8 49/64 1-3/8 5/32 1 Tools 67070 CS7/16 1 7/16 7/16 1/2 2-3/4 53/64 1-1/2 7/32 1 67080 CS7/16A 1 7/16 29/64 1/2 2-3/4 53/64 1-1/2 7/32 1 67090 CS1/2 1 1/2 1/2 1/2 2-13/16 15/16 1-9/16 1/4 1 67100 CS1/2A 1 1/2 33/64 1/2 2-13/16 15/16 1-9/16 1/4 1 See next page for technical diagram TYPE 82-AG 82º PILOT LESS COUNTERSINK Specialty Shank Overall Part Diameter of Cut Screw Diameter Length No.
    [Show full text]