“The Standard Fabrication Machine for your Custom Profiles” PVC, Aluminum, Composite & Wood Profile Processing Just add your custom Solution Guides & Fixtures Up To 14 Axis and 8 Spindles Flexible Autoloader Size and Capacity All Four Sides Automatic Drilling, Routing & Down Cut Miter Saw 45°-135° “THE SAW THAT DOES IT ALL” PVC COMPOSITE Wood ALUMINUM Automatic Profile Drilling & Routing on Four Sides with Down Cut Miter Saw 45-135° Automatic Servo Top Axis Assembly Driven Miter Saw 45- XYZ-150mm Stroke 135 Degree One Spindle 18000 RPM 2.2 KW Saw Blade 16 Inch Back Axis Assembly XYZ-150mm Stroke One Spindle 18000 RPM 2.2 KW Bottom Axis Assembly Front Axis Assembly XYZ-150mm Stroke XYZ-150mm Stroke One Spindle One Spindle 18000 RPM 18000 RPM 2.2 KW 2.2 KW Configure Machine with any Combination of Axis (2-12) and Spindles (1-8) Automatic Servo Top Axis Assembly Driven Miter Saw 45- XZ-150mm Stroke 135 Degree One Spindle 18000 RPM 2.2 KW Saw Blade 16 Inch Back Axis Assembly XZ-150mm Stroke One Spindle 18000 RPM 2.2 KW Bottom Axis Assembly Front Axis Assembly XZ-150mm Stroke XZ-150mm Stroke One Spindle One Spindle 18000 RPM 18000 RPM 2.2 KW 2.2 KW Configure Machine with any Combination of Axis (2-12) and Spindles (1-8) Automatic Servo Top Axis Assembly Driven Miter Saw 45- XZZ-150mm Stroke 135 Degree Two Spindles 18000 RPM 2.2 KW Saw Blade 16 Inch Back Axis Assembly XXZ-150mm Stroke Two Spindles 18000 RPM 2.2 KW Bottom Axis Assembly Front Axis Assembly XZZ-150mm Stroke XXZ-150mm Stroke Two Spindles Two Spindles 18000 RPM 18000 RPM 2.2 KW 2.2 KW Configure Machine with any Combination of Axis (2-12) and Spindles (1-8) RhinoFab1400 Fabrication System Specifications Units Data Cutting Unit Down Cut Miter Saw - Yes • Fully automatic profile drilling, routing & Cutting Angle Degree 45-135 miter cutting. Carbide Blade Diameter Inch 16 • For precise, high speed cutting, drilling & Saw Motor Power Hp 4 routing of Vinyl, Fibrex, Aluminum & Axis Travel Wood profiles. Top/Bottom -X Axis Inch 5.9 • Drill, Rout & Countersink on Top, Top/Bottom Y-Axis Inch 5.9 Bottom, Front & Back of profile. Top/Bottom -Z Axis Inch 5.9 Front/Back X-Axis Inch 5.9 • Completely enclosed cutting area. Front/Back Y-Axis Inch 5.9 • Two Vacuum ports 6” dia. for dust ex- Front/Back Z-Axis Inch 4.9 traction. Infeed Pusher Y-Axis Inch 417 • Fully integrates with Rhino Autoloader Infeed Aoutoloader X-Axis Inch 60-120 or single profile pusher with roller ta- Positioning Speed bles. All X, Y, Z-Axis Speed in/sec 0-100 • The RhinoFab1400 can take varies cut Infeed Pusher Y-Axis Speed in/sec 0-30 list formats. IInfeed Aoutoloader X-Axis Speed in/sec 0-30 • Complete Optimization & Drop Control. Saw Stroke Speed in/sec 0-6 Saw Rotation Speed in/sec 0-300 • Servo controlled saw feed. Drilling/Milling Unit • Zero backlash gearbox, servo controlled Electrospindle Motor Power KW 2.2 rotation. Drill/Milling Speed RPM 0-18000 • Automatic drill bit, router bit & saw Tool Holder, HSK32, ER25 Inch 0.060 - 0.65 blade lubrication. Profile Cutting Capacity 90 Degree, H x W Inch 3.5 x 6.0 • Composite Back Fence Rollers and Guide Pads for gentle profile handling 45-135 Degree Miter, H x W Inch 3.5 x 5.0 Coolant System Saw Nozzle 3X QTY 1 Drill/Mill Nozzle 1X QTY 4 Automatic Central Lubrication System QTY 1 Contact Bill Cole at Glazier Center Dimension/Weight (607) 698-4430 for more RhinoFab1400 Unit Lbs 1760 information. Width Inch 60 Depth Inch 66 Height Inch 76 .