PARTS LIST ITEM QTY PART NUMBER MATERIAL DESCRIPTION 1 1 BASE CAST IRON 2 1 COLLAR SAE 1020 3 2 SET SCREW SAE 1016 4 1 SPECIAL KEY SAE 1020 5 1 VISE SCREW SAE 3140 6 2 SLIDE KEY SAE 1020 7 2 JAW PLATE SAE 3140 8 1 SLIDING JAW CAST IRON 9 4 COUNTER SUNK MACHINE MILD STEEL COUNTER SUNK MACHINE HEAD SCREW HEAD SCREW ANSI B18.6.3 - 1/4-20 UNC x 0.75, CRCTFCHMSTII(2) 11 1 HANDLE ROD COLD ROLLED STEEL 12 2 HANDLE BALL SAE 1020 13 2 TAPER PIN STEEL #000 LEGEND: DIAMETER MASTER ASSEMBLY R RADIUS SCALE 1 / 2 ° DEGREES COUNTERBORE DEPTH COUNTERSINK COURSE: DDGT 240 INVENTOR DRAWING NAME: GENERAL NOTES: MACHINE VISE TOLERANCES UNLESS SPECIFIED: FIG #: 14-71 ALL FILLETS AND ROUNDS ARE 1/8 DECIMAL INCHES: X = ±.020 DRAFTER: UNLESS NOTED OTHERWISE XX = ±.010 MMCDONOUGH DIGITAL DESIGN XXX = ±.005 GRAPHICS FRACTIONAL ±1/64" DATE: 10/1/2020 ANGLES±1 DEGREE TECHNOLOGY 32 SCALE: SURFACES AS NOTED WWW.DDGT.NET PAGE #: 1 OF 5 PARTS LIST ITEM QTY PART NUMBER 1 1 BASE 7 2 JAW PLATE 8 1 SLIDING JAW 7 9 4 COUNTER SUNK MACHINE HEAD SCREW 9 9 9 7 8 1 LEGEND: DIAMETER R RADIUS ° DEGREES STEP 1 STEP 2 COUNTERBORE SCALE 1 / 2 SCALE 1 / 2 DEPTH COUNTERSINK COURSE: DDGT 240 INVENTOR DRAWING NAME: MACHINE VISE GENERAL NOTES: TOLERANCES UNLESS SPECIFIED: FIG #: 14-71 DECIMAL INCHES: ALL FILLETS AND ROUNDS ARE 1/8 X = ±.020 DRAFTER: DIGITAL DESIGN XX = ±.010 MMCDONOUGH UNLESS NOTED OTHERWISE XXX = ±.005 GRAPHICS FRACTIONAL ±1/64" DATE: 10/1/2020 ANGLES±1 DEGREE TECHNOLOGY 32 SCALE: SURFACES AS NOTED WWW.DDGT.NET PAGE #: 2 OF 5 PARTS LIST 13 ITEM QTY PART NUMBER 12 8 1 1 BASE 2 1 COLLAR 10 3 2 SET SCREW 4 1 SPECIAL KEY 5 1 VISE SCREW 1 6 2 SLIDE KEY 7 2 JAW PLATE 8 1 SLIDING JAW 10 4 AS 2465 - 5/16 x 1 1/2 UNC 11 1 HANDLE ROD 12 2 HANDLE BALL 5 13 2 TAPER PIN 11 4 2 12 LEGEND: 12 DIAMETER R RADIUS 3 6 ° DEGREES COUNTERBORE STEP 4 DEPTH 13 SCALE 1 / 4 COUNTERSINK STEP 3 SCALE 1 / 2 COURSE: DDGT 240 INVENTOR DRAWING NAME: MACHINE VISE TOLERANCES UNLESS SPECIFIED: FIG #: 14-71 GENERAL NOTES: DECIMAL INCHES: X = ±.020 DRAFTER: ALL FILLETS AND ROUNDS ARE 1/8 XX = ±.010 MMCDONOUGH DIGITAL DESIGN XXX = ±.005 UNLESS NOTED OTHERWISE GRAPHICS FRACTIONAL ±1/64" DATE: 10/1/2020 ANGLES±1 DEGREE TECHNOLOGY 32 SCALE: SURFACES AS NOTED WWW.DDGT.NET PAGE #: 3 OF 5 7 1/4 PARTS LIST ITEM QTY PART NUMBER 1 1 BASE 1 1/8 5 2 1 COLLAR 4 1 SPECIAL KEY 7 2 JAW PLATE 33/64 13/16-20UNEF-3A,LH 5 2 3/4 4 23/32 3/32 X 1/8 13/16 SLOT 3/8 4X R1/4 4X 5/16 5/8 - 8 ACME 1 1/2 R11/16 COLLAR R1 3/8 1 1/4 4X R1 1/8 3/4 SCALE 1 : 1 1/8 R1/4 1 1/4-2OUNC-2B, 2X 1/4 FLAT HEAD 1 3/16 5/8 X2 1 3/4 MACHINE SCREW .502 .498 R1/4 3 5/16 2 3/4 2 3/16 3/4 2 1/4 1 11/16 1/8 1 1/16 1 3/4 LEGEND: 1.004 DIAMETER 5/16 7 1/4 1.000 R RADIUS BASE 1.254 1.250 1 1/2 5/8 3/16 ° DEGREES SCALE 1 / 2 COUNTERBORE JAW PLATE SCALE 1 / 2 DEPTH COUNTERSINK 25/64 COURSE: DDGT 240 INVENTOR DRAWING NAME: MACHINE VISE TOLERANCES UNLESS SPECIFIED: FIG #: DECIMAL INCHES: 14-71 R23/64 GENERAL NOTES: X = ±.020 DRAFTER: XX = ±.010 MMCDONOUGH .125 DIGITAL DESIGN .122 ALL FILLETS AND ROUNDS ARE 1/8 XXX = ±.005 SPECIAL KEY GRAPHICS FRACTIONAL ±1/64" DATE: 10/1/2020 UNLESS NOTED OTHERWISE ANGLES±1 DEGREE TECHNOLOGY 32 SCALE: SCALE 1 : 1 SURFACES AS NOTED WWW.DDGT.NET PAGE #: 4 OF 5 PARTS LIST .750-.748 X 1 3/16, FLAT BOTTOM ITEM QTY PART NUMBER 13/16 - 2OUNEF - 3B, LH 7/16 2 3/4 2 3/4 5 1 VISE SCREW R11/16 6 2 SLIDE KEY 1 9/16 1/8 A 1 1/2 R1/4 3/4 8 1 SLIDING JAW R1 3/8 11 1 HANDLE ROD 3/4 1 3/16 12 2 HANDLE BALL 1 3/4 1 3/4 .188 R1/4 .187 2 3/16 .504 - .507 1/4 - 2OUNC - 2B 1 1/2 1 3/8 A VIEW A-A 5/8 SCALE 1 / 2 .219 3/8 .217 .998 2 9/16 .996 2 5/16 1/8 .341 BB .340 13/16 .186 .131 R1/16 SLIDING JAW 1 3/32 5/32 .185 13/32 .128 5/8 ACME 3/8 1/2 SCALE 1 / 2 3/4 1/4 5/8 SLIDE KEY #25 (.1495), 1(1/16) SCALE 1 / 2 3 15/16 #12 (.216) - 24UNC - 2B , 3/4 1 3/16 6 1/4 11/32 7/32 ,3/8 1/2 VISE SCREW LEGEND: SCALE 1 / 2 DIAMETER 2X #37 DRILL AND .312 .311 R RADIUS REAM WITH PART 5 1/8 VIEW B-B ° DEGREES #9 IN PLACE SCALE 1 / 2 COUNTERBORE #000 TAPER PIN CLEAR THROUGH HANDLE ROD DEPTH 90° PEEN SMALL END OVER SCALE 1 / 2 COUNTERSINK COURSE: DDGT 240 INVENTOR DRAWING NAME: HANDLE BALL MACHINE VISE TOLERANCES UNLESS SPECIFIED: FIG #: SCALE 1 : 1 R3/8 DECIMAL INCHES: 14-71 X = ±.020 DRAFTER: XX = ±.010 MMCDONOUGH DIGITAL DESIGN XXX = ±.005 GENERAL NOTES: DATE: "M"(.295) 1/2 GRAPHICS FRACTIONAL ±1/64" 10/1/2020 ALL FILLETS AND ROUNDS ARE 1/8 ANGLES±1 DEGREE TECHNOLOGY 32 SCALE: SURFACES AS NOTED .313 - .312 UNLESS NOTED OTHERWISE WWW.DDGT.NET PAGE #: 5 OF 5.