Large Sleigh Template for Aunties Two Pattern Number AT602 Sleigh-Full ©2016 by Aunties Two

Home , Binding (sewing)

Print landscape. Page Scaling: None Check the length of the three red guidelines. Enlarge or reduce to achieve length (or as close as possible)

When printing make sure the dashed line to the right is 7¼"

When printing make sure the dashed line below is 10⅛"

Changes to Pattern for Large Sleigh (WOF = width of fabric or 42/44"): When printing make sure the Materials: ½ yard main fabric, ½ yard runners/binding fabric dashed line to the right is 6⅛" 1¼ yard stiff double-sided fusible interfacing like Peltex II

Cutting: Fabric Interfacing Sides Cut 1 strip 11½" x WOF Cut 2 strips 11½" x 20" from that cut 4 rectangles 8½" x 11½" from these cut 4 rectangles 8½" x 11½" Gussets Cut 2 strips 6" x 20" Cut 2 strips 6" x 20" Runners Cut 2 strips 5" x 22" Cut 2 strips 2" x 20" Binding Cut 6 strips 1¼" x WOF

Sewing: Follow the instructions on pages 3-8 with the following changes: ►On page 4, when sewing the binding on each gusset, extend the length of the binding strip for the gusset by sewing leftover side binding to one end. ►On page 5, on one gusset, draw a line across the gusset 6" in from one end (back) and 5" in from the other end (front) ►On page 6, on the finished runners, draw a line 1½" in from one end and 9½" in from the other end. When pinning the Runners to the Gusset, match the 1½" line on the runner to the 6" line on the gusset. Sew between the lines on the Gusset. ►On page 7, sew across the gusset on both the 6" and 5" lines. Fold the gusset on the 6" line.