Resaw Guide — Band Resaw Guide — Band Supplier Baker Products Baker Products Baker Products Baker Products Baker Products Baker Products Baker Products Model A AB B C CX D DX Saw Type Band resaw Band resaw Band resaw Band resaw Band resaw Band resaw Band resaw Cant Capacity 6” wide x 12” tall 6” wide x 12” tall 6” wide x 12” tall 6” wide x 12” tall 12” wide x 12” tall 16” wide x 16” tall 18” wide x 18” tall Blade Size 13’2” x 1” x 0.035” or 13’2” x 1 1/4” x 0.035” 13’2” x 1” x 0.035” or 13’2” x 1 1/4” x 0.035” 13’2” x 1” x 0.035” or 13’2” x 1 1/4” x 0.035” 13’2” x 1” x 0.035” or 13’2” x 1 1/4” x 0.035” 14’2” x 1” x 0.035” or 14’2” x 1 1/4” x 0.035” 18’5” x 1 1/4” x 0.035” or 18’5” x 1 1/2” x 0.035” 19' x 1 1/4” x 0.042” or 19’ x 1 1/2” x 0.042” or 120 FPM 19' x 2” x 0.042” Maximum Feed Speed 120 FPM 95 FPM Exclusive Baker guide system, 6” wide conveyor, 120 FPM 120 FPM 60 FPM 100 FPM Key Features Baker exclusive guide system, hydraulic feed Baker exclusive guide system, hydraulic feed hydraulic powered hold down Baker exclusive guide system, 6” wide conveyor, Bakers exclusive guide system, 12” wide Spring tensioning on blades, Bakers exclusive Computer setworks, hydraulic blade tensioning, speed control, 6” wide conveyor with VSD control, 6” wide conveyor, and Baker 3-sided and 4-sided feed system conveyor, Baker 3-sided and 4-sided feed system guide system, 16” wide conveyor, powered hold powered hold down, control console chair powered hold down down Controls Electrical panel with starter, motor overloads and Electrical panel with starters, motor overload and 3 phase electrical panel with starter, motor 3 phase electrical panel with starter, motor 3 phase electrical panel with starter, overload 3 phase electrical panel with starter, overload Control console chair with optional heated/air start/stop station start/stop station overload protection, 110V start/stop station overload protection, 110V start/stop station protection, 110V start/stop station protection, 110V start/stop station conditioned cab

Feedworks Hydraulic motor driven feedworks by main motor Hydraulic with powered hold down wheel 2-sided feedworks- hydraulically powered hold 3-sided feedworks- rough top belting conveyor, 3-sided feedworks- rough top belting conveyor, Rough top belting conveyor and powered hold 2 sided feedworks-Rough top belting and downs powered side feed rollers, non-powered hold over powered side feed rollers, non-powered hold over down wheel powered hold down wheel wheels, and optional hold down wheel wheels, and optional hold down wheel Saw Motor 20 HP electric 20 HP TEFC 20 HP TEFC (30 HP optional) 20 HP TEFC (30 HP optional) 30 HP TEFC (40 HP optional) 40 HP TEFC (50 HP optional) 50 HP TEFC Options Infeed and outfeed turnarounds, powered hold Computer setworks, tilting conveyor Digital readout for blade height, computer Computer setworks, turnarounds, return Turnarounds, return conveyor, computer Hold over wheels, return conveyor, computer Return conveyor, infeed and outfeed over wheels, powered hold down wheels setworks, return conveyor conveyor, non-powered hold downs setworks, non-powered hold downs setworks, infeed and outfeed turnarounds turnarounds, infeed deck Saw Kerf 0.072 0.072 0.072 0.072 0.072 0.072 0.072 Blade Width 1” or 1 1/4” 1” or 1 1/4” 1” or 1 1/4” 1” or 1 1/4” 1” or 1 1/4” 1 1/4” or 1 1/2” 1 1/4” or 1 1/2” or 2” Wheel Diameter 28” 28” 28” 28” 28” 36” 36” # of Heads (range) 1 1 1 to 9 on single frame, 10+ on multiple frames 1 to 9 on single frame, 10+ on multiple frames 1 to 9 on single frame, 10+ on multiple frames 1 to 7 1 to 7 Cut Thickness (range) 1/4” to 6” 1/4” to 8” 1/4” to 8 1/2” 1/4” to 8 1/2” 1/4” to 8 1/2” 1/4” to 12” 1/4” to 16” Phone Number 800/548-6914 800/548-6914 800/548-6914 800/548-6914 800/548-6914 800/548-6914 800/548-6914

Supplier Brewco Inc. Brewco Inc. Brewco Inc. Cook’s Saw Mfg. LLC Cook’s Saw Mfg. LLC Cook’s Saw Mfg. LLC Keystone Machinery Corp. Model B-800 Resaw Big Band Resaw EX-Cut Band Resaw CR8E GL30 CR6E HD882 Saw Type Horizontal resaw Horizontal resaw Horizontal resaw Low Profile Pallet Resaw Grade Lumber Resaw Low Profile Pallet Resaw Bandsaw Cant Capacity 8” wide x 16” tall 8” wide x 10” tall 8” wide x 8” tall 8” x 8” 16” x 16” 6” x 6” 8”wide x 12” high Blade Size 2” wide x 20’4” long 1”, 1 1/4” or 1 1/2” wide x 13’2” long 1” wide x 10' long 16’10” 16’10” 16’10” 19’4” Maximum Feed Speed 140 FPM 80 FPM 60 FPM 100 FPM 100 FPM 100 FPM 130 FPM Key Features This resaw is an industry workhorse that offers This resaw is an industry standard with its This resaw is ideal for smaller operations A stationary bed and movable head eliminates Saw head is located below the bed which A stationary bed and movable head eliminates Unique Double Pivot Holdown on either side of feed speeds that will match the best gang saw, smooth and consistent cutting. It offers the looking for consistent cut quality in a small infeed and outfeed bed adjustment when eliminates infeed and outfeed roller adjustment infeed and outfeed bed adjustment when the bandsaw blade but with thinner kerf and higher yield. The 2” optional patented floating guide and air footprint. Heads are built modular to allow for changing blade cutting height when blade cutting height is changed changing blade cutting height wide blade is the widest blade available without dedusting mechanism. Powered infeed future expansion in your mill. the use of an expensive filing room. A patented holddowns are standard. floating guide with air de-duster, heavy-duty chrome-hardened roller guides, and powered infeed and outfeed holddowns are standard. Controls Hydraulic flow control for feed speed Hydraulic flow control for feed speed Hydraulic flow control for feed speed Electric over air Electric over hydraulic Electric over air Electric Feedworks Central hydraulic unit powers all hydraulic motors Central hydraulic unit powers all hydraulic Central hydraulic unit powers all hydraulic Variable frequency drive Variable speed flow control valve Variable frequency drive Hydraulic motor and powered holddowns motors and powered holddowns motors Saw Motor 40 HP, 3-phase 440-480 volt 20 HP, 3-phase 440-480 volt 15 HP, 3-phase 440-480 volt 20 HP 30 HP 15 HP 20 HP electric, lineshaft, or hydraulic Power Options Powered slide and return Patented floating guide with air dedusting Powered slide and return, powered infeed Floating air guide, steel paddle belt mechanism, powered outfeed holddown, holddowns powered slide and return Saw Kerf .082” to .092” .070” .055” to .070” .035 to .055 .042 to .055 .035 to .055 0.070 Blade Width 2” 1”, 1 1/4” or 1 1/2” 1” 1”, 1 1/2”, or 2” 1 1/2” ot 2” 1”, 1 1/2”, or 2” 1.25”, 1.5”, or 2” Wheel Diameter 40” 28” 20” 26” 26” 26” 36” # of Heads (range) 1 to 6 1 to 6 1 to 6 1 1 to 2 1 2 to 10 Cut Thickness (range) 1/2” to 8” 1/2” to16” 1/2” to 6” 1/2” to 7” 1/2” to 15 1/2” 1/2” to 5” 0.25” to 8” Phone Number 800/237-6880 800/237-6880 800/237-6880 800/473-4804 800/473-4804 800/473-4804 717/859-4977

Supplier Brewer Inc. Golden Eagle Equipment Brewer Inc. Golden Eagle Equipment Brewer Inc. Golden Eagle Equipment Brewer Inc. Golden Eagle Equipment Brewer Inc. Golden Eagle Equipment Cooper Machine Co. Cooper Machine Co. Model DE 8 x 12 DE 12 x 12 GE 8 x 12 GE 12 x 12 SE 6.5 x 6.5 Multiple Multiple Saw Type Diamond Eagle Bandsaw Diamond Eagle Bandsaw Golden Eagle Bandsaw Golden Eagle Bandsaw Silver Eagle Bandsaw Vertical Band Horizontal band Cant Capacity 8” wide x 12” tall x random length 12” wide x 12” tall x random length 8” wide x 12” tall x random length 12” wide x 12” tall x random length 6 1/2” wide x 6 1/2” tall x random length 3” to 24” 3” to 24” Blade Size 4" wide x 18’10" long x .042 x 1 3/4" tooth spacing 4" wide x 18’10" long x .042 x 1 3/4" tooth spacing 1", 1 ¼”, 1 ½” or 2” wide X 16’6” long 1", 1 ¼”, 1 ½” or 2” wide X 17’2” long 1” or 1 ¼” wide X 13’5” long 3” to 24” 2” to10” Maximum Feed Speed 150 FPM 150 FPM 100 FPM 100 FPM 100 FPM 230 FPM Varies based on band size Key Features Heavy duty steel structure. Ductile Iron band Heavy duty steel structure. Ductile Iron band Heavy duty steel structure. Ductile Iron band Heavy duty steel structure. Ductile Iron band Heavy duty steel structure. Ductile Iron band Solid steel wheels, pressure guides, heavy Solid steel wheels, roller guides, variable wheels. Powered rubber tire hold downs. wheels. Powered rubber tire hold downs. wheels. Powered rubber tire hold downs. wheels. Powered rubber tire hold downs. wheels. Powered rubber tire hold downs. duty speed drive, movable saw guides Steering wheel blade tracking. Hydraulic blade Steering wheel blade tracking. Hydraulic blade Steering wheel blade tracking. Hydraulic Steering wheel blade tracking. Hydraulic Steering wheel blade tracking. Hydraulic level adjustment. Swedge tooth blade leaves level adjustment. Swedge tooth blade leaves blade level adjustment. blade level adjustment. hand pump blade level adjustment. less dust on boards. less dust on boards. Square D for high voltage & starters. Proface for Square D for high voltage & starters. Proface Controls PLC & automation. Square D for high voltage & starters. Proface for Square D for high voltage & starters. Proface Square D for high voltage & starters. Proface for PLC & automation. Mudata, Cooper Mudata, Cooper Hydraulic variable speed PLC & automation. for PLC & automation. for PLC & automation. Hydraulic variable speed Feedworks Hydraulic variable speed Hydraulic variable speed Hydraulic variable speed Servo, hydraulic, electric vector or Servo, hydraulic, electric vector or mechanical mechanical Saw Motor 40 HP 50 HP 20 HP 30 HP 15 HP 40 HP to 300 HP 40 HP to 300 HP Options Return Belt. Slat bed chain feed or Rough top Return Belt. Slat bed chain feed or Rough top Return Belt. Slat bed chain feed or Rough Return Belt. Slat bed chain feed or Rough Return Belt. Slat bed chain feed or Rough Increased motor HP drive, infeed/outfeed Increased motor HP drive, wider band belt feed. Automatic set works. belt feed. Automatic set works. top belt feed. Automatic set works. top belt feed. Automatic set works. top belt feed. Automatic set works. system, return system wheels, push & release arm, added weight to drive wheels, infeed/outfeed system, return system Saw Kerf 0.095 0.095 0.083 0.083 0.083 .080 to .130 .080 to .130 Blade Width 4” 4” 1", 1 ¼”, 1 ½” or 2” 1", 1 ¼”, 1 ½” or 2” 1" or 1 ¼” 2” to 10” 2” to 10” Wheel Diameter 40” 40” 36” 36” 30” 36 to -6' 36 to -6' # of Heads (range) 1 to 10 1 to 10 1 to 10 1 to 10 1 to 10 1 to 2 1 to 8 Cut Thickness (range) 3/8” to 12” 3/8” to 12” 3/8” to 12” 3/8” to 12” 3/8” to 6 1/2” 0.5” to 8” .5” to 8” Phone Number 800/345-6516 800/345-6516 800/345-6516 800/345-6516 800/345-6516 478/252-5885 478/252-5885

24 PALLET ENTERPRISE Request Advertiser Info at: www.palletenterprise.com/zip.asp YOUR #1 MACHINERY AND INFORMATION SOURCE SEPTEMBER 2012 25 Resaw Guide — Band Resaw Guide — Circular Supplier Pallet Machinery Group/West Plains Resaw Pallet Machinery Group/West Plains Resaw Pallet Machinery Group/West Plains Resaw Pallet Machinery Group/West Plains Resaw Brewco Inc. Brewco Inc. Brewco Inc. Model 200 Series 400 Series 500 Series 600 Series SASB SADB DASB Saw Type Horizontal Band Resaw Horizontal Band Resaw Horizontal Band Resaw Horizontal Band Resaw Single arbor, single bay gangsaw Single arbor, double bay gangsaw Double arbor, single bay gangsaw Cant Capacity 8” x 12” or 16” x 16” 8” x 12” or 16” x 16” 8” x 12” or 16” x 16” 8” x 12” or 18” x 18” or 20” x 20” 2” x 12”, 28” minimum length 28” to 72” length, 2” to 12” width 2” x 12”, 28” minimum length Blade Size (Band only) 2” wide x 20’10 1/4” long 4” wide x 20’10 1/4” long 5” wide x 20’10 1/4” long 6” wide x 20’8 3/4” long Maximum Feed Speed 150 FPM 200 FPM 200 FPM 200 FPM 80 to 100 FPM 80 to 100 FPM 80 to 100 FPM Key Features Thin kerf, heavy duty Thin kerf, heavy duty Thin kerf, heavy duty Thin kerf, heavy duty Solid Chrome-hardened diamond tooth rolls, top Solid Chrome-hardened diamond tooth rolls, Solid Chrome-hardened diamond tooth rolls, and bottom, infeed and outfeed, 6-knife cutter top and bottom, infeed and outfeed, 6-knife top and bottom, infeed and outfeed, 6-knife head planer, 15Hp central hydraulic station, cutter head planer, 15 HP central hydraulic cutter head planer, 15 HP central hydraulic Hinged door for easy maintenance, outboard station, hinged door for easy maintenance, station, hinged door for easy maintenance, bearings and sprockets on all rolls, bushed outboard bearings and sprockets on all rolls, outboard bearings and sprockets on all rolls, sprockets top and bottom, new-design chip bushed sprockets top and bottom, new-design bushed sprockets top and bottom, new-design breaker and holddown shoe chip breaker and holddown shoe chip breaker and holddown shoe Controls Computer, manual or hydraulic Computer, manual or hydraulic Computer, manual or hydraulic Computer, manual or hydraulic Hydraulic flow control Hydraulic flow control Hydraulic flow control Feedworks Computer or manual Computer or manual Computer or manual Computer or manual 11ea. powered rolls - 5 on top, 6 on bottom 11ea. powered rolls x 5” diameter - 5 on top, 15ea. powered rolls x 5” diameter - 5 on top, 10 6 on bottom on bottom Saw Motor 40 HP 50 HP 60 HP 75 HP or 100 HP 100 HP arbor motor, 30 HP planer motor, 15 HP 125 HP arbor motor, 50 HP planer motor, 15Hp 125 HP bottom arbor motor, 100 HP top arbor hydraulic, all are 3-phase, 440-480 volt hydraulic, all are 3-Phase, 440-480 volt motor, 50 HP planer motor, 15Hp hydraulic, all are 3-Phase, 440-480 volt Options Return system, operator’s cab Return system, operator’s cab Return system, operator’s cab Return system, operator’s cab Electrical starter panel, sleeved arbor, single Electrical starter panel, sleeved arbor, single Electrical starter panel, sleeved arbor, single chain feeder chain feeder chain feeder Saw Kerf 0.085 0.095 0.098 0.105 .125 to .165 Blade Width (Band only) 2” 4” 5” 6” .125 to .165 .125 to .165 Diameter - Wheel/band, Blade/circular 42” 42” 42” 42” 12” to 18”, carbide tipped with strobes 12” to 18”, carbide tipped with strobes 12” to 18”, carbide tipped with strobes Heads/band (range) - Blade Thickness/circular 1 and up 1 and up 1 and up 1 and up Cut Thickness (range) 1/2” to 9” 1/2” to 9” 1/2” to 9” 1/2” to 9” 3/4” to 6 1/2” 3/4” to 6 1/2” 2” to 6 1/2” Phone Number 540/644-9220 540/644-9220 540/644-9220 540/644-9220 800/237-6880 800/237-6880 800/237-6880

Supplier Pendu Mfg. Inc Universal Machinery Sales Wood-Mizer Industrial Wood-Mizer Industrial Brewco Inc. Brewer Inc. Golden Eagle Equipment Brewer Inc. Golden Eagle Equipment Model 5400 Band Resaw Low Profile HR120 HR130 DADB BR-9915 MTA BR-9912 Saw Type Band Single, double band, with or without return Band Band Double arbor, double bay gangsaw Double Arbor Gangsaw Double Arbor Gangsaw Cant Capacity 8” x 12” 8” wide x 12” tall 16” wide x 12” tall 12” tall x 16” wide 28” to 72” length, 2” to 12” width 6” tall x 15” wide 6” tall x 12” wide Blade Size (Band only) 13’2” 158” 158” Maximum Feed Speed 100 FPM 120 FPM 60 FPM 85 FPM 80 to 100 FPM 100 FPM 100 FPM Key Features Hydraulic driven, hardened steel, table top One operator to feed material,one to off load. Head tilts to produce lap siding Head tilts up to 8 degrees to produce lap Solid Chrome-hardened diamond tooth rolls, top Built in planer sizer, hard chromed diamond Built in planer sizer, hard chromed diamond conveyor 8' long, pneumatic band tension with Operator never touches the cant. Band heads siding and bottom, infeed and outfeed, 6-knife cutter toothed feed rolls, precision, dust free boards, toothed feed roll and precision, dust free boards low pressure shut off do not block operator’s view so they can see head planer, 15 HP central hydraulic station, ability to run 12” diameter blades for 6” tall the entire cut process. hinged door for easy maintenance, outboard material and 10” diameter blades for 4” tall bearings and sprockets on all rolls, bushed material sprockets top and bottom, new-design chip breaker and holddown shoe Controls Electric/hydraulics Electronic Electronic Hydraulic flow control Square D for high voltage & starters Square D for high voltage & starters Feedworks Infeed and outfeed hydraulic driven top hold Hydraulics Variable speed control Variable speed control 15ea. powered rolls - 5 on top, 10 on bottom Hydraulic Variable Speed Hydraulic Variable Speed down rolls Saw Motor 20 HP, TEFC 18 HP or 25 HP Gas, 18 HP Diesel, 10 HP 15 HP Electric 230V 3Ph, 15 HP Electric 460 200 HP bottom arbor motor, 150 HP top arbor 75 HP to 150 HP 75 HP to 150 HP 40 HP Electric 230V 1Ph, 15 HP Electric 460 3Ph 3Ph motor, 50 HP planer motor, 15Hp hydraulic, all are 3-Phase, 440-480 volt Options Single head to 4 head machine , single phase, Optional cant return system and shingle belt Optional setworks, optional cant return Electrical starter panel, sleeved arbor, single Sleeved arbors, six knife high speed steel or Sleeved arbors, six knife high speed steel or three phase, Canadian voltage, line shaft, gas, system, optional shingle belt chain feeder indexable carbide planer head indexable carbide planer head all hydraulics Saw Kerf 2” 1” Blade .068, 1 ¼”, Blade .088 .095” .095” .125 to .165 .143” with 12” blades and .125 with 10” blades .143” Blade Width (Band only) 1 ¼” to 1 ½” 1.25” or 1.5” 1.25” or 1.5” Diameter - Wheel/band, Blade/circular 24” 19” 19” 12” to 18”, carbide tipped with strobes 12”for 6” material and 10” for 4” material 12”as double arbor or 14” as single arbor Heads/band (range) - Blade Thickness/circular 1 to 4 1 1 .083” plate for 12” blades and .075” for 10” blades .083” Cut Thickness (range) 3/8” to 7” 1” to 16” 1” to 16” 2” to 6 1/2” ¾” to 6” high x 3/8” to 15” wide ¾” to 6” high x 3/8” to 12” wide Phone Number 800/233-0471 855/298-8890 800/553-0182 800/553-0182 800/237-6880 800/345-6516 800/345-6516 Resaw Guide — Circular Supplier Wood-Mizer Industrial Wood-Mizer Industrial Wood-Mizer Industrial Brewer Inc. Golden Eagle Equipment Brewer Inc. Golden Eagle Equipment Keystone Machinery Corp. Pendu Mfg. Inc. Model HR300 HR500 HR1000 BR-1299 BR-9924 DG612 M4300N Saw Type Single-head Horizontal Band Multi-head Band Multi-head Band Single Arbor Gangsaw Double Arbor Double Bay Gangsaw Double Arbor Gangsaw Circular Saw Cant Capacity 16” tall x 10” wide 11.75” tall x 15.75” wide 12” tall x 12” wide 4” tall x 12” wide 6” tall X 24” wide 6” high x 12” wide 8” high x 12” wide Blade Size (Band only) 158” 158” 205” Maximum Feed Speed 100 FPM 65 FPM 100 FPM 100 FPM 100 FPM 130 FPM 100 FPM Key Features Steel belt Steel belt Steel belt, spiked feed rollers, hydraulic blade Built in planer sizer, hard chromed diamond Two 12” wide bays for two set ups or one 24” Chrome harden web, with automatic greaser Will process regular or notched cants, will tension, pressurized blade guides toothed feed rolls and precision, dust free wide bay, built in planer sizer, hard chromed process boards down to ¾” thickness, all boards diamond toothed feed rolls and precision, dust driven rolls with the ability to process down to free boards 24” long material Controls Electronic Electronic Electronic Square D for high voltage & starters Square D for high voltage & starters Electric Feedworks Variable speed control Variable speed control Variable speed control Hydraulic Variable Speed Hydraulic Variable Speed Hydraulic motor Hydraulically driven feed system with hydraulically driven chain infeed system standard Saw Motor 10 HP, 20 HP, 25 HP Electric 15 HP Electric 25 HP Electric 75 HP to 150 HP 75 HP to 200 HP 75 HP electric or line shaft power 100 HP Options Pressurized lubrication system, roller tables Cross roller table, idle roler table Optional merry-go-round cant return sytem, Sleeved arbors, six knife high speed steel or Six knife high speed steel or indexable carbide Sizer, web or rolls Higher feed speeds, larger HP available additional heads indexable carbide planer head planer head Saw Kerf .095” .095” .095” .160” with 14” blades .143 .145 Blade Width (Band only) 1.25” to 1.5” 1.25” to 2” 1” to 1.5” Diameter - Wheel/band, Blade/circular 24” 24” 34” 14” 12” 10” or 12” 8”, 10” or 12” Heads/band (range) - Blade Thickness/circular 1 1 to 6 1 to 6 .100” plate .083” plate .085 Cut Thickness (range) 2” to 10” 2” to 11.75” 1” to 12” ¾” to 4” high x 3/8” to 12” wide ¾” to 6” high X 3/8” Xo 24” wide 6” high x 0.25” thick Phone Number 800/553-0182 800/553-0182 800/553-0182 800/345-6516 800/345-6516 717/859-4977 800/233-0471

26 PALLET ENTERPRISE Request Advertiser Info at: www.palletenterprise.com/zip.asp YOUR #1 MACHINERY AND INFORMATION SOURCE SEPTEMBER 2012 27