Sawmills & Other Primary Processors

Total Page:16

File Type:pdf, Size:1020Kb

Sawmills & Other Primary Processors SAWMILLS & OTHER PRIMARY PROCESSORS Aitkin S-1 Company Name & Address Products Equipment Production & Remarks Species Aitkin Copperhead Road Logging/Lumber Lumber(GN/AD); Band Saw; Edger; Kiln, 0 to 100 MBF Portable sawmill 54852 Great River Rd Electric; Aspen -- Birch, Paper -- Portable Custom Palisade, MN 56469 Maple, Soft -- Maple, Sawing; Retail Sales; Joe Jewett Hard -- Basswood -- (218) 845-2832 Oak, Red -- Espeseth Lumber Lumber(GN/AD); Pallet Band Saw; Edger; 0 to 100 MBF Stationary sawmill 36955 Deer St Parts; Basswood -- Oak, Red - Stationary Custom Aitkin, MN 56431 - Oak, White -- Ash, Sawing; Tim Espeseth Black -- (218) 927-3453 Hawkins Sawmill Inc. Lumber(GN/AD); Circle Saw; Band Saw; Over 3000 MBF Stationary sawmill 15132 280th Ave. Cants(for resaw); Debarker; Edger; Aspen -- Birch, Paper -- Isle, MN 56342 Railroad/Landscape Resaw; Maple, Soft -- Maple, Tom Hawkins Ties; Specialty; Hard -- Basswood -- (320) 676-8479 Oak, Red -- Oak, White [email protected] -- Ash, Green/white -- Ash, Black -- John Benson Jr Lumber(GN/AD); Circle Saw; Edger; 0 to 100 MBF Stationary sawmill 27643 Partridge Ave Cants(for resaw); Resaw; Kiln, Birch, Paper -- Stationary Custom Aitkin, MN 56431 Dehumidification; Basswood -- Oak, Red - Sawing; Custom Drying; John Benson Jr - Custom (218) 678-3031 Millwork/Paneling; John Pisarek Flooring; Paneling; Band Saw; Edger; Kiln, 0 to 100 MBF Stationary sawmill 35108 320th Street Lumber(GN/AD); Dehumidification; Birch, Paper -- Oak, Custom Drying; Aitkin, MN 56431 Lumber(KD); Red -- Oak, White -- John Pisarek Ash, Black -- (866) 336-4523 Savanna Pallets Boxes or Crates; Band Saw; Scragg Over 3000 MBF Stationary sawmill PO Box 308 Pallets/Skids; Saw; Chipper; Edger; Aspen -- Birch, Paper -- None; McGregor, MN 55760 Lumber(GN/AD); Resaw; Gang Saw; Maple, Soft -- Al Raushel Cants(for resaw); Other; Basswood -- Oak, Red - (218) 768-2077 Railroad/Landscape - Oak, White -- Pine, Fax: (218) 768-3112 Ties; Red -- Tamarack -- Ash, [email protected] Black -- Larry Raushel (218) 838-7096 Fax: (218) 768-3112 Smith Sawmill Rustic Products; Band Saw; Kiln, Hot 0 to 100 MBF Portable sawmill 15580 260th Ave. Water; Pine, Red -- Spruce, Stationary Custom McGrath, MN 56350 White -- Sawing; Custom Drying; Retail Sales; Portable Custom Sawing; Anoka SAWMILLS & OTHER PRIMARY PROCESSORS Anoka - Becker - S-2 Beltrami Company Name & Address Products Equipment Production & Remarks Species Chuck Bradley Lumber(GN/AD); Band Saw; 0 to 100 MBF Stationary sawmill 22640 Buchanan St. N.E. Oak, Red -- Ash, Black Stationary Custom East Bethel, MN 55005 -- Sawing; Portable Chuck Bradley Custom Sawing; (763) 434-4059 Northern Timber Mouldings; Circle Saw; Edger; 0 to 100 MBF Stationary sawmill 7115 237th Ave NE Lumber(GN/AD); Planer; Resaw; Trim Aspen -- Cottonwood -- Stacy, MN 55079 Railroad/Landscape Saw; Oak, Red -- Oak, White Dave Westergren Ties; Squares; -- (651) 462-6076 Tim's Timber Lumber(GN/AD); Band Saw; Planer; 0 to 100 MBF Portable sawmill 1990 Birch Street Lumber(KD); Surfaced Elm -- Cottonwood -- Stationary Custom Hugo, MN 55038 KD Lumber; Oak, Red -- Oak, White Sawing; Portable Tim Harder -- Custom Sawing; (612) 849-0476 Becker Clyde Schwartz Sawmill Lumber(GN/AD); Circle Saw; 0 to 100 MBF Stationary sawmill 58688 State Hwy 87 Squares; Hardwood Oak, White -- Pine, Stationary Custom Menahga, MN 56464 Dimension parts; Jack -- Sawing; Clyde Schwartz (218) 564-4218 Liberty Paper Inc. 0 to 100 MBF other 13500 Liberty Ln Becker, MN 55308 Bill Kovak Two Inlets Mill Flooring; Mouldings; Circle Saw; Edger; 101 to 500 MBF Stationary sawmill 55676 Cty Hwy 44 Siding; Lumber(GN/AD Planer; Resaw; Trim Birch, Paper -- Stationary Custom Park Rapids, MN 56470 Graded); Surfaced AD Saw; Other; Basswood -- Oak, Red - Planing; Custom Nick or George Kueber Lumber; - Pine, White -- Pine, Millwork/Paneling; (218) 732-7229 Red -- Pine, Jack -- Retail Sales; Fax: (218) 699-3592 Ash, Black -- Other -- Katie Kueber (218) 732-7229 Fax: (218) 699-3592 [email protected] Wilson Wood Products Flooring; Paneling; Band Saw; Edger; 0 to 100 MBF Portable sawmill 50894 State HWY 225 Lumber(GN/AD); Planer; Resaw; Trim Aspen -- Basswood -- Stationary Custom Ponsford, MN 56575 Lumber(KD); Squares; Saw; Kiln, Sawing; Custom Drying; Roger Wilson Building Logs; Dehumidification; Stationary Custom (218) 573-2800 Hardwood Dimension Planing; Custom Fax: (218) 573-2258 parts; Millwork/Paneling; Other; Beltrami Brambrink Hardwoods Lumber(GN/AD); Circle Saw; Edger; 0 to 100 MBF Stationary sawmill 21424 Hwy 1 NE Planer; Pine, Red -- Stationary Custom Blackduck, MN 56630 Sawing; Paul Brambrink (218) 647-8498 SAWMILLS & OTHER PRIMARY PROCESSORS Beltrami S-3 Company Name & Address Products Equipment Production & Remarks Species Chuck Nelson Lumber(GN/AD); Band Saw; Edger; 0 to 100 MBF Portable sawmill 21532 Northern Lights Land N.E. Oak, Red -- Pine, White Portable Custom Tenstrike, MN 56683 -- Pine, Red -- Spruce, Sawing; Chuck Nelson Black -- Ash, Black -- (218) 368-4295 Heim Hand Crafted Log Homes 0 to 100 MBF other 16821 Turtle Estates Ct NW Pine, Red -- Bemidji, MN 56601 Ron Heim (218) 766-2699 Nathan Heim (218) 647-8373 Helblad's Mill, Inc. Boxes or Crates; Chips; Band Saw; 101 to 500 MBF Stationary sawmill 42501 Pioneer Road NE Pallet Parts; Aspen -- Kelliher, MN 56650 Kevin Helblad (218) 647-8218 Highland Timber Co Pallet Parts; Circle Saw; Trim Saw; 101 to 500 MBF Stationary sawmill 1504 Gull Lake Rd Aspen -- Bemidji, MN 56601 Marv Ewing (218) 586-2555 Jeff Gyr Lumber(GN/AD); Band Saw; Planer; 0 to 100 MBF Stationary sawmill 17854 Lumberjack Rd. N.W. Fuelwood; Aspen -- Oak, Red -- Stationary Custom Pinewood, MN 56676 Pine, Red -- Pine, Jack Sawing; Custom Drying; Jeff Gyr -- Spruce, Black -- Stationary Custom (218) 243-2120 Planing; Smischeny Sawmill Lumber(GN/AD); Circle Saw; Edger; 0 to 100 MBF Stationary sawmill 37724 Willow Creek Road NE Poles/Pilings; Posts; Planer; Aspen -- Cedar, White - Stationary Custom Kelliher, MN 56650 Building Logs; Rustic - Sawing; Jim Smischeny Products; (218) 647-8366 Superior Rustics, Inc Rustic Products; Band Saw; 0 to 100 MBF Stationary sawmill 6474 Sundown Road NW Cedar, White -- Solway, MN 56619 Jim Cole (218) 444-9501 Fax: (218) 444-5143 T & J Sawmill Lumber(GN/AD); Circle Saw; Edger; Lath 0 to 100 MBF Stationary sawmill 74379 Powderhorn Road NW Poles/Pilings; Posts; Mill; Tamarack -- Stationary Custom Grygla, MN 56727 Other; Sawing; Retail Sales; Tim Foss (218) 294-6233 SAWMILLS & OTHER PRIMARY PROCESSORS Beltrami - Benton S-4 Company Name & Address Products Equipment Production & Remarks Species Tasler Northwoods Inc. Pallets/Skids; Pallet Circle Saw; Band Saw; 1001 to 3000 MBF Stationary sawmill PO Box 30 Parts; Chip & Saw; Debarker; Aspen -- Birch, Paper -- Stationary Custom Kelliher, MN 56650 Edger; Resaw; Hog; Basswood -- Ash, Black Sawing; Joan Peterson -- (218) 647-8516 Fax: (218) 647-8960 [email protected] Wagner Sawmill, LLC Lumber(GN/AD); Circle Saw; Chipper; 1001 to 3000 MBF Stationary sawmill 24747 Summit Hail Road NE Cants(for resaw); Edger; Resaw; Gang Aspen -- Birch, Paper -- Blackduck, MN 56630 Railroad/Landscape Saw; Basswood -- Oak, Red - Bob Wagner Ties; Specialty; - Spruce, White -- Ash, (701) 367-8028 Black -- [email protected] Ada Mill (218) 784-7744 [email protected] Greg Sorheim (218) 835-6680 William Hubbell Lumber(GN/AD); Band Saw; 0 to 100 MBF Stationary sawmill 13616 Powerdam Rd. N.E. Cants(for resaw); Birch, Paper -- Pine, Stationary Custom Bemidji, MN 56601 White -- Pine, Red -- Sawing; Portable William Hubbell Custom Sawing; (218) 751-5384 Benton Kirchner Sawmill Lumber(GN/AD); Band Saw; Planer; 0 to 100 MBF Stationary sawmill 45 43rd St NE Lumber(KD); Gang Saw; Kiln, Forced Cottonwood -- Maple, Stationary Custom Sauk Rapids, MN 56379 Air; Soft -- Maple, Hard -- Sawing; Custom Drying; John Kirchner Basswood -- Birch, Stationary Custom (320) 252-3185 Yellow -- Walnut -- Oak, Planing; Red -- Oak, White -- Ash, Green/white -- Pine, White -- Pine, Red -- Spruce, White -- Tamarack -- Lloyd Erdmann Lumber(KD); Band Saw; 0 to 100 MBF Portable sawmill 10200 Sucker Creek Rd NE Maple, Hard -- Oak, Portable Custom Rice, MN 56367 Red -- Oak, White -- Sawing; Lloyd Erdmann Tamarack -- (320) 393-4279 Thomas Ross Lumber(GN/AD); Other; Band Saw; 0 to 100 MBF Stationary sawmill 3558 13th Ave SE Maple, Hard -- Stationary Custom St. Cloud, MN 56304 Basswood -- Oak, Red - Sawing; Thomas Ross - Ash, Green/white -- (320) 251-7001 Ash, Black -- Blue Earth SAWMILLS & OTHER PRIMARY PROCESSORS Blue Earth - Brown - S-5 Carlton Company Name & Address Products Equipment Production & Remarks Species Douglas Wall Lumber(GN/AD); Band Saw; Kiln; 0 to 100 MBF Portable sawmill 301 S. Cort St. Lumber(KD); Maple, Hard -- Walnut -- Portable Custom Comfrey, MN 56019 Ash, Green/white -- Sawing; Custom Drying; Douglas Wall (507) 877-4506 James Volk Bandmill Lumber(GN/AD); Band Saw; Edger; 0 to 100 MBF Stationary sawmill 23611 610 Ave. Lumber(KD); Cants(for Planer; Kiln, Cedar, Red -- Stationary Custom Madison Lake, MN 56063 resaw); Dehumidification; Other; Cottonwood -- Oak, Sawing; James Volk Red -- Oak, White -- (507) 317-9471 Run of the Mill Flooring; Paneling; Band Saw; Planer; 0 to 100 MBF Portable sawmill 122 Mapleridge Dr. Siding; Resaw; Kiln, Vacuum; Maple, Hard -- Walnut -- Custom Drying; Mankato, MN 56001 Lumber(GN/AD); Oak, Red -- Oak, White Stationary Custom John Kaliski Lumber(KD); Squares; -- Ash, Black -- Western Planing; Portable (507) 420-9908 Posts; Other; Log Species
Recommended publications
  • BEST PRACTICES for STUCCO APPLICATIONS GUIDE Revised April 1, 2019
    LENEXA – BEST PRACTICES for STUCCO APPLICATIONS GUIDE Revised April 1, 2019 This document is provided through endorsement by the Johnson County Building Officials. General Exterior wall coverings, along with the roofing, flashings, windows and doors, are designed to provide a weather-resistive barrier that separates the interior of the structure from the elements. Low maintenance and attractive appearance are just two reasons why hard coat stucco has become so popular over the years. At the same time, the building industry has become aware of the need to protect the exterior wall sheathing from moisture damage. The walls shall be constructed so that water does not accumulate within the assembly. This means creating a water-resistive plane behind the exterior veneer that allows moisture that does get into the wall to drain down and out without coming in contact with the wood framing. Detailing around windows, doors and other penetrations in the envelope is equally important in protecting the wood frame structure behind the stucco from being damaged by water infiltration. Since the wall sheathing behind the stucco is the lateral load resisting system of the structure, in addition to the supporting surface for the exterior siding, it is important to see that continuous undetected penetrations of the siding by moisture do not create structural damage such as decay and corrosion or environmental damage which may cause health related problems such as the growth of mold and mildew. To this end, the removal of moisture that gets past the exterior envelope before it contacts the wood framing is the primary goal of the weather-resistive barrier and why it is critical that it be installed properly.
    [Show full text]
  • Section 09220 Portland Cement Plaster
    PROJECT NO. ####### PROJECT TITLE CONTRACT TITLE SECTION 09220 PORTLAND CEMENT PLASTER PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation for Portland Cement Plaster (Stucco) siding as shown and detailed on the drawings and specified herein. B. Related Work Specified Elsewhere: 1. Division 6, Section 06100 – ROUGH CARPENTRY 1.02 SUMMARY A. This Section includes the following: 1. Metal framing and furring 2. Metal lath and accessories 3. Plastic accessories 4. Portland cement plaster 5. Stucco finishes 1.03 SUBMITTALS A. General: See Division 1, Section 01330 – Shop Drawings, Product Data and Samples. B. Product Data for each product specified. C. Samples for initial selection in the form of manufacturer's color charts consisting of actual units or sections of units at least 12” square showing the full range of colors, textures, and patterns available for each type of finish indicated. 1. Where finish involves normal color and texture variations, include Sample sets composed of 2 or more units showing the full range of variations expected. 2. Include similar Samples of material for joints and accessories involving color selection. 1.04 DELIVERY, STORAGE, AND HANDLING A. Deliver cementitious materials to Project site in original packages, containers, or bundles, labeled with manufacturer's name, product brand name, and lot number. B. Store materials inside, under cover, and dry, protected from weather, direct sunlight, surface contamination, aging, corrosion, and damage from construction traffic and other causes. 09220 - 1 PORTLAND CEMENT PLASTER 07/2014 Edition PROJECT NO. ####### PROJECT TITLE CONTRACT TITLE 1.05 PROJECT CONDITIONS A.
    [Show full text]
  • National Register of Historic Places Registration Form NAT
    NPS Form 10-900 OMB No. 10024-0018 (Oct. 1990) RECEIVED 2280 United States Department of the Interior $p National Park Service JUL - 5 I996 National Register of Historic Places Registration Form NAT. REGISTER OF HiSiQfiiCKA CFS NATIONAL PARK SERVICE This form is for use in nominating or requesting determinations for individual properties and districts. See instructions in How to Complete the National Register of Historic Places Registration Form (National Register Bulletin 16A). Complete each item by marking "x" in the appropriate box or by entering the information requested. If an item does not apply to the property being documented, enter "N/A" for "not applicable." For functions, architectural classification, materials, and areas of significance, enter only categories and subcategories from the instructions. Place additional entries and narrative items on continuation sheets (NPS Form 10-900a). Use a typewriter, word processor, or computer, to complete all items. 1. Name of Property historic name Hull, Ralph, Lumber Company Mill Complex other names/site number Hull-Oakes Limber Company Mill 2. Location street & number 23837 Dawson Road N/A not for publication city or town Monroe Kl vicinity state Oregon code OR county Benton code 003 zip icode 97456 As the designated authority under the National Historic Preservation Act, as amended, I hereby certify that this US nomination D request for determination of eligibility meets the documentation standards for registering properties in the National Register of Historic Places and meets the procedural and professional requirements set forth in 36 CFR Part 60. In my opinion, the property IS meets EH does not meet the National Register criteria.
    [Show full text]
  • Code of Practice for Wood Processing Facilities (Sawmills & Lumberyards)
    CODE OF PRACTICE FOR WOOD PROCESSING FACILITIES (SAWMILLS & LUMBERYARDS) Version 2 January 2012 Guyana Forestry Commission Table of Contents FOREWORD ................................................................................................................................................... 7 1.0 INTRODUCTION ...................................................................................................................................... 8 1.1 Wood Processing................................................................................................................................. 8 1.2 Development of the Code ................................................................................................................... 9 1.3 Scope of the Code ............................................................................................................................... 9 1.4 Objectives of the Code ...................................................................................................................... 10 1.5 Implementation of the Code ............................................................................................................. 10 2.0 PRE-SAWMILLING RECOMMENDATIONS. ............................................................................................. 11 2.1 Market Requirements ....................................................................................................................... 11 2.1.1 General ..........................................................................................................................................
    [Show full text]
  • Guide to the Mccleary Experimental Forest
    akec Mt. A GUIDE TO THE ;0-c :f !•• McCLEARY EXPERIMENTAL FOREST Me CLEARY, WASHINGTON About This File: . This file was created by scanning the printed publication. Misscans identified by the software have been corrected; ho e · \f\/ r-_ some mistakes may remain. _ ANGELES L l OLYMPIC lI NATIONAL ';I I _,J PARK ;-' ) -,_ ___ 1 __, r' "1) --· .......... 'l::> :__ :.. ... -----.. _J C') ., C') : \\\ .. I ,,,.,[/,-. i:-:;:::-=- A RY 1 '·\·,..... ' c Al FOREST C') L_/_:---/ "' 'l::> <: MAINTAINED JOINTLY BY THE PACIFIC NORTHWEST FOREST S RANGE EXPERIMENT STATION Mt. Adams PUGET SOUND RESEARCH CENTER AND THE SIMP SON LOGGING COMPANY U.S. DEPARTMENT OF AGRICULTURE FOREST SERVICE PORTLAND, OREGON 1954 - - - (I) A GUIDE TO THE ... <I) McCLEARY EXPERIMENTAL FOREST · 3: 0 - "' (I) The McCleary Experimental Forest is a co­ ... operative undertaking in forest research by private·industry and the United States Forest -0 (I) Service. Here, the Simpson Logging Company and - ::1 the Pacific Northwest Forest and Range Experiment e Station, through its Puget Sound branch, conduct 0 studies and demonstrations in management of young­ z ...: (I) growth forests. This is one of four experimental - -• I:: (I) forests in the Puget Sound region dedicated to ::1 u 0 improvement of management practices through coop­ >. >. c erative research. Under a long-term agreement, - u the Forest Service prepares the management plan, "'0 >. 0 ... 0 0 outlines experiments, and regulates cutting .... (I) schedules. The Simpson Logging Company provides -cu u I::0:2 fire protection, develops roads, and cuts and markets the products. An Advisory Committee of E c. 0 foresters actively engaged in forest management ->.
    [Show full text]
  • Wood Waste As a Raw Material Lionel K
    Volume 18 Article 3 1-1-1930 Wood Waste as a Raw Material Lionel K. Arnold Iowa State College Follow this and additional works at: https://lib.dr.iastate.edu/amesforester Part of the Forest Sciences Commons Recommended Citation Arnold, Lionel K. (1930) "Wood Waste as a Raw Material," Ames Forester: Vol. 18 , Article 3. Available at: https://lib.dr.iastate.edu/amesforester/vol18/iss1/3 This Article is brought to you for free and open access by the Journals at Iowa State University Digital Repository. It has been accepted for inclusion in Ames Forester by an authorized editor of Iowa State University Digital Repository. For more information, please contact [email protected]. THE AMES FORESTER 17 Wood Waste as a Raw Material Lionel K. Arnold, Engineering Experiment Station It is estimated that the annual sawdust pile of the world would be several times as large as the largest skyscraper of New 'York. The sawclust is only about one-fifth of the total waste from the lumber industry. It is estimated that 62 per cent of each tree cut for lumber is wasted. This includes the limbs, top, and stump as well as the waste at the mill. From the sawlogs alone the waste is approximately 49 per cent. Unbreakable dolls and dynamite are only two of the many products made fl-om wood flour which is made from sawdust and other wood wastes. In spite of the immense quantities of sawdust and other wood wastes produced in the United States, we are importing in the neighborhood of 12 million pounds of wood flour every year at a cost of about 90 thousand dollars.
    [Show full text]
  • Preserving Historic Ornamental Plaster David Flaharty
    PRESERVATION BRIEFS Preserving Historic Ornamental Plaster David Flaharty U.S. Department of the Interior National Park Service Cultural Resources Heritage Preservation Services From the time America struggled for a new identity as the 1930s. During this two hundred year period, as the a constitutional republic-and well into the 20th Georgian and Federal styles yielded to the revivals­ century-its architecture and its decorative detailing Greek, Rococo, Gothic, Renaissance, and Spanish­ remained firmly rooted in the European classicism of decorative plaster reflected each style, resulting in the Palladio, Wren, and Mansart. wide variety of ornamentation that survives. The tradi­ tional methods of producing and installing interior Together with skilled masons and carpenters, orna­ decorative plaster were brought from Europe to this mental plasterers saw their inherited trade flourish country intact and its practice remains virtually un­ from the mid-18th century until the Depression years of changed to this day. Fig. 1. Ornamental plaster studios employed the following personnel: Draftsmen to interpret architectural details in shop drawings; sculptors who modelled in clay; model makers who assembled sculpted, plain-run and pre-cast elements into an ornamental unit; moldmakers who made rigid or flexible negative tooling; casters who made production units; finishers (often the caster's wives) who cleaned the casts; and laborers who assisted skilled personnel in operating efficiently. This studio was in Philadelphia, c. 1915. Photo: Courtesy, M. Earle Felber. Styles of Decorative Plaster in America, 18th-20th Centuries d e (a) Kenmore, Fredericksburg, Virginia. c. 1752. Georgian in style with orna­ mental ceilings based on Batty Langley's 1739 English style book, the plaster­ work was executed by a Frenchman in the mid-1770s.
    [Show full text]
  • A Sawmill Or Lumber Mill Is a Facility Where Logs Are Cut Into Lumber
    Sawmill - Wikipedia https://en.wikipedia.org/wiki/Sawmill From Wikipedia, the free encyclopedia A sawmill or lumber mill is a facility where logs are cut into lumber. Prior to the invention of the sawmill, boards were rived (split) and planed, or more often sawn by two men with a whipsaw, one above and another in a saw pit below. The earliest known mechanical mill is the Hierapolis sawmill, a Roman water-powered stone mill at Hierapolis, Asia Minor dating back to the 3rd century AD. Other water-powered mills followed and by the 11th century they were widespread in Spain and North Africa, the Middle East and Central Asia, and in the next few centuries, spread across Europe. The circular motion of the wheel was converted to a reciprocating motion at the saw blade. Generally, only the saw was powered, and the logs had to be loaded and moved by hand. An early improvement was the development of a movable carriage, also water powered, to move the log steadily through the saw blade. By the time of the Industrial Revolution in the 18th century, the circular saw blade had been invented, and with the development of steam power in the 19th century, a much greater degree of mechanisation was possible. Scrap lumber from the mill provided a source of fuel for firing An American sawmill, 1920 the boiler. The arrival of railroads meant that logs could be transported to mills rather than mills being built besides navigable waterways. By 1900, the largest sawmill in the world was operated by the Atlantic Lumber Company in Georgetown, South Carolina, using logs floated down the Pee Dee River from the Appalachian Mountains.
    [Show full text]
  • Levelquik® Es Extended Setting Self-Leveling
    SURFACE PREPARATION LEVEL QUIK ® ES PRICE EXTENDED SETTING SELF-LEVELING UNDERLAYMENT Up to 30 minutes working time For installations requiring extended working time Apply featheredge to 2" (5 cm) thick Rated for use on wood subfloors with joists up to 24" (61 cm) o.c. PRODUCT DESCRIPTION LIMITATIONS Easy-to-use formula with long working time. Imperfections can Not recommended for use over lightweight concrete, be corrected within 15 minutes after pouring. An additional gypsum underlayment, OSB, particle board, hardwood 15 minute “heal time” can be obtained by troweling the or parquet floors, metal or for exterior use. surface of the material. Applies from featheredge to 2" (5 cm) Do not use when temperatures are below 50° F (10° C) thick. ASTM C627 rated for ceramic tile installations over or on sloped surfaces that require drainage. wood subfloors with joists up to 24" (61 cm) o.c. With proper installation of the flooring system, the use of LevelQuik ® ES Not meant for use as a wear surface. can achieve an “Extra Heavy” rating for extra heavy and high SURFACE PREPARATION impact use in food plants, dairies, breweries and kitchens. General Surface Preparation: Levels interior floors prior to the installation of ceramic tile, All surfaces must be structurally sound, clean, dry and free natural stone, resilient flooring, carpet, wood and parquet. from contaminants that would prevent a good bond. Concrete AREAS OF USE must be fully cured and not subject to hydrostatic pressure. Concrete surfaces should accept water penetration. Smooth Concrete concrete surfaces, existing glazed tile, terrazzo, or polished ® ® Backerboards such as WonderBoard and EasyBoard stone should be roughened or scarified.
    [Show full text]
  • Technical Services Information Bureau TECHNICAL BULLETIN ASSESSING WOOD-BASED SHEATHING JANUARY 2008 60.150 UPDATED MAY 2017
    Technical Services Information Bureau TECHNICAL BULLETIN ASSESSING WOOD-BASED SHEATHING JANUARY 2008 60.150 UPDATED MAY 2017 Wood-based sheathing is commonly used under many INSPECTION: exterior claddings, such as portland cement plaster • All wood-based sheathing should be sound, (stucco). Covering wet wood-based sheathing, plywood properly attached to framing members and or oriented strand board (OSB), is not recommended. installed per APA recommendations. STRESS: • A moisture content below 19% prior to applying Wood products swell when exposed to moisture 2 layers of a water-resistive barrier. or humidity. The amount of dimensional change is estimated at 1% of the width or thickness of lumber for • Wood-based panels should be installed with 1/8 every 5% change in moisture content. This expansion inch gaps at edges and ends to allow for of wood-based products can place stress on cement expansion of the panel to minimize stress plaster stucco. This stress can crack plaster. Even a (cracking) in cement stucco (Code requirement minor amount of movement can cause cement plaster behind portland cement plaster per ASTM that is not fully cured (green) to crack. The same stress C1063). can occur when wood-based sheating shrinks or dries. • Fasteners should be set flush prior to applying MOISTURE: the water-resistive barrier(s). The Engineered Wood Association (APA) recommends wall sheathing and lumber framing “should be allowed to dry (no less than 18%) so that moisture absorbed during construction or induced from other sources is minimized”. The average fiber saturation point for wood is typically 28%. At this percentage, water begins to fill all the fiber cells.
    [Show full text]
  • Massachusetts Sawmill Directory
    Massachusetts Directory of Sawmills & Dry Kilns – 2006 David T. Damery and Curt Bellemer - University of Massachusetts, Amherst Gordon Boyce – Massachusetts Dept. of Conservation & Recreation Acknowledgments Cover and interior art courtesy of Joseph Smith. This publication made possible through a grant from the USDA Forest Service. This institution is an equal opportunity provider. Copyright 2006. 1 Table of Contents Acknowledgements 1 Table of Contents 2 Section 1 – Sawmill & Dry Kiln Directories Introduction 4 Sawmills Operating in Massachusetts 6 Portable Bandmills Operating in Massachusetts 17 Dry Kilns Operating in Massachusetts 20 Section 2 – Forest & Forest Products Industry Information Selected Massachusetts Forest Products Industry Statistics 25 Area by Land Use 26 Trends in Forest Land Area 26 Area of timberland by forest-type and owner, 2005 27 Area of timberland by stand-size class, 2005 28 Volume of growing stock by species group, 2005 29 Net volume of sawtimber by diameter class, 2005 30 County Map of Massachusetts 31 History of Sawmills in the Directory 32 Sawmills by County 32 Softwood & Hardwood Production by County 33 Softwood & Hardwood Production - All Mills 33 Softwood Production - All Mills 34 E. White Pine - Production Volume by County 34 Eastern Hemlock - Production Volume by County 35 Red Pine - Production Volume by County 35 Hardwood Production - All Mills 36 Red Oak - Production Volume by County 36 White Oak - Production Volume by County 37 Sugar Maple - Production Volume by County 37 Size of Mills by Roundwood
    [Show full text]
  • Forest Health Through Silviculture
    United States Agriculture Forest Health Forest Service Rocky M~untain Through Forest and Ranae Experiment ~taiion Fort Collins, Colorado 80526 Silviculture General ~echnical Report RM-GTR-267 Proceedings of the 1995 National Silviculture Workshop Mescalero, New Mexico May 8-11,1995 Eskew, Lane G., comp. 1995. Forest health through silviculture. Proceedings of the 1945 National Silvidture Workshop; 1995 May 8-11; Mescalero, New Mexico. Gen. Tech; Rep. RM-GTR-267. Fort Collins, CO: U.S. Department of Agriculture, Forest Service, Rocky Mountain Forest and Range Experiment Station. 246 p. Abstract-Includes 32 papers documenting presentations at the 1995 Forest Service National Silviculture Workshop. The workshop's purpose was to review, discuss, and share silvicultural research information and management experience critical to forest health on National Forest System lands and other Federal and private forest lands. Papers focus on the role of natural disturbances, assessment and monitoring, partnerships, and the role of silviculture in forest health. Keywords: forest health, resource management, silviculture, prescribed fire, roof diseases, forest peh, monitoring. Compiler's note: In order to deliver symposium proceedings to users as quickly as possible, many manuscripts did not receive conventional editorial processing. Views expressed in each paper are those of the author and not necessarily those of the sponsoring organizations or the USDA Forest Service. Trade names are used for the information and convenience of the reader and do not imply endorsement or pneferential treatment by the sponsoring organizations or the USDA Forest Service. Cover photo by Walt Byers USDA Forest Service September 1995 General Technical Report RM-GTR-267 Forest Health Through Silviculture Proceedings of the 1995 National Silviculture Workshop Mescalero, New Mexico May 8-11,1995 Compiler Lane G.
    [Show full text]