Financing Pulp Mills – an Appraisal of Risk Assessment and Safeguard

Total Page:16

File Type:pdf, Size:1020Kb

Financing Pulp Mills – an Appraisal of Risk Assessment and Safeguard Financing Pulp Mills Financing Pulp Mills An Appraisal of Risk Assessment and Safeguard Procedures An Appraisal of Risk Assessment and Safeguard Procedures Machteld Spek Machteld Spek Financing Pulp Mills: An Appraisal of Risk Assessment and Safeguard Procedures Machteld Spek National Library of Indonesia Cataloging-in-Publication Data Spek, Machteld Financing pulp mills: an appraisal of risk assessment and safeguard procedures/ Machteld Spek Bogor, Indonesia: Center for International Forestry Research (CIFOR), 2006. 86p. ISBN 979-24-4612-5 1. pulp and paper industry 2. risk assessment 3. investment planning 4. environmental impact 5. social impact. I. title © 2006 by CIFOR All rights reserved. Published in 2006 Printed by SUBUR printing Cover photo by Christian Cossalter Design and layout by Catur Wahyu ISBN 979-24-4612-5 Published by Center for International Forestry Research Jl. CIFOR, Situ Gede, Sindang Barang, Bogor Barat 16680, Indonesia Tel.: +62 (251) 622622; Fax: +62 (251) 622100 E-mail: [email protected] Web site: http://www.cifor.cgiar.org Contents Preface v Executive Summary viii Acknowledgements xiii Introduction 1 Trends in pulp investment: Capacity and financing 4 Pulp production process and impacts 4 Pulp production capacity and industry structure 5 Investments in pulp capacity after 1995 10 Financing raised by pulp producers 12 Conclusion 15 Principal sources of funding for pulp mills 16 Development funding from multilateral development banks 16 World Bank 17 IFC 20 MIGA 23 ADB 24 EIB & EBRD 24 Other multilaterals 26 Export credit agencies 26 Commercial financings 28 Market access 31 Lending cost 33 Domestic banks 35 Equity 36 Conclusion 37 Financial risk assessment 39 Credit risk assessment 39 Due diligence 42 Ongoing (risk) analysis 45 Credit rating agencies 45 Securities research 49 Corporate disclosure 51 Conclusion 52 iv Impact assessment and safeguards 53 Equator Principles 53 Safeguard implementation 55 Implementing safeguards in transactions in the international capital markets 59 Improving standards and implementing safeguards in existing operations 59 The Global Reporting Initiative 61 Conclusion 64 Key findings and recommendations 66 Key findings 66 Recommendations 70 Sources 72 Appendices 75 Glossary 83 Preface In October 2003, the World Bank hosted the Forest Investment Forum, a two-day conference which brought together 150 senior executives of forest product companies, private and public sector financial institutions, and conservation organizations. The Forum’s central aim was “to explore opportunities for private sector companies, the World Bank, the IFC, and other financial institutions to invest in environmentally, socially, and economically sustainable forest enterprises in developing and economic transition countries.” Perhaps not surprisingly, much of the discussion at the Forest Investment Forum focused on anticipated capacity expansion in the global pulp and paper sector. It was projected that some 128 million tonnes of new paper and paperboard capacity will likely be needed to meet growing world demand by 2015. While much of this new capacity will be fed by recovered paper, it is estimated that 36 million tonnes of new wood pulp capacity will be installed over the next decade, including 22 million tonnes of hardwood kraft pulp. This expansion of wood-based pulp capacity is likely to require approximately US$ 54 billion in capital investment through 2015. Several billion dollars more will be needed to develop millions of hectares of fast-growing pulpwood plantations. Even if only a fraction of this is ultimately realised, these projections suggest that a new wave of pulp mill financings may soon be underway. Existing plans indicate that much of the new capacity will be brought online in Brazil, China, Indonesia, the Mekong region of Southeast Asia, and the Baltic states. Several speakers at the Forum – including Masya Spek, the author of this study – emphasised that such projections underscore the need for investment institutions to employ stronger practices in assessing the financial risks, legal compliance, and social and environmental impacts of pulp and plantation investments. Pulp mills require special attention for a number of reasons: First, the enormous scale of modern pulp mills means that they consume very substantial volumes of wood. A single BHKP mill with an annual capacity of 1.0 million tonnes, for instance, will typically require between 4.5 – 5.0 million cubic meters of roundwood per year – roughly equivalent to 15 percent of the total annual timber harvest from the Brazilian Amazon. Large-scale pulp mills can also place considerable pressures on natural forests when production capacity is installed before supporting plantations are brought online, as prior CIFOR research in Indonesia has shown. In countries or regions with poor forest governance, demand for pulpwood can be a significant vi factor driving illegal logging. Plantation development, too, is often associated with displacement of forest communities and social conflicts. The present study examines how pulp mill projects – including both the development of greenfield mills and capacity expansions – get financed. The analysis is based on a close review of 67 pulp projects, with a combined 25.5 million tonnes/year of planned new capacity, that were proposed between 1995 and 2003. Spek, a Chartered Financial Analyst who has covered markets in Southeast Asia for over 13 years and worked in the financial sector for over 20 years, traces the sources of financing available, respectively, to producers seeking to expand existing operations and those planning to build new mills. She assesses why some projects got financed and why some ultimately did not. This analysis illuminates the fact that most pulp capacity expansions are funded through commercial financings – that is, through loans, bonds, or equity issues – while greenfield mill projects generally require government or multilateral support. The study also examines how financial institutions assess the risks and potential impacts of the pulp mill projects they fund. The picture that emerges suggests that most export credit agencies, merchant banks, and other private sector investment institutions have little in-house expertise related to forestry issues and/or social and environmental impact assessment. Many prefer to rely on information provided by the project sponsor and, whenever possible, on the participation of the IFC or other multilateral agencies, which have stronger capacity to carry out such evaluations. In practice, this often means that a range of issues which may have critical importance to the success of a proposed project-- such as growth rates and productivity levels at supporting plantation sites; the legality of wood to be consumed by a proposed mill; and the likely impacts of a project on local livelihoods -- are poorly assessed. The good news is that a growing number of financial institutions have, in recent years, adopted stronger safeguards to limit negative social and environmental impacts of forest- related investments. In 2001, for instance, Dutch banks ABN AMRO and Rabobank introduced policies that explicitly prohibit making loans for projects that involve conversion of primary forest, purchase of illegally harvested timber, or displacement of indigenous peoples. Moreover, since 2003 some 33 lending institutions have endorsed the Equator Principles, an initiative led by the IFC to enhance the use of social and environmental safeguards for project financings in all industry sectors, including forestry. That same year, many of the world’s leading export credit agencies adopted the OECD ‘Common Approaches on Environment’, which require environmental impact assessments to be conducted before most forest-related projects can be approved. In this study, Spek examines the relevance of such initiatives to pulp mill finance, giving particular attention to the Equator Principles. She rightly applauds signatory banks for taking an important step towards incorporating social and environmental considerations into lending practices. Yet she points out that the Equator Principles cover only project finance – and, therefore, apply only to a very small portion of total bank funding for pulp mill projects. There is clearly considerable room to expand the relevance of the Equator Principles to pulp investments if they could be broadened to include other types of financial arrangements, as well. This study also emphasises the importance of improved corporate reporting practices on the part of pulp producers and associated plantation and forestry companies, in order to enhance transparency and accountability. In particular, Spek highlights the potentially important role that the UNEP-sponsored Global Reporting Initiative could play in establishing an industry standard for corporate reporting on key operational variables, including fiber supply. vii This study is being published by CIFOR, with support from the DFID-funded Multi-stakeholder Forestry Programme and from the European Commission’s Asia Pro Eco Programme, with the aim of improving risk analysis and due diligence practices on the part of financial institutions involved in funding pulp mill projects globally. We sincerely hope that the analysis and recommendations presented here will help financial institutions to better assess the risks and impacts of the projects they fund – and, in doing so, to support more environmentally, socially, and economically sustainable investments in this important sector. Christopher Barr Senior
Recommended publications
  • Preservation and Conservation (PAC) Programme Frequently Asked Questions
    Preservation and Conservation (PAC) Programme Frequently Asked Questions Paper conservation by using Japanese paper, washi Prepared by PAC Japan Q: What is washi? A: Washi, or Japanese paper, can be made from the fibre of kozo (paper mulberry family), mitsumata (daphne family), or gampi (daphne family), but the most commonly used material is kozo. The traditional papermaking process for kozo starts by steaming bundles of kozo bark to remove the outer dark layer and often the intermediate green layer. The white inner bark is cooked in a mild alkaline solution such as wood ash or soda ash to remove lignin and other impurities. Strong alkali such as caustic soda were not traditionally used during this process. Next, the fibre is beaten by hand until it is fine enough to be dispersed in water with a small amount of a dispersion agent, neri, a mucilagenous substance from tororo-aoi (abelmoschus manihot) plants. Finally, the paper maker dips a flexible Japanese papermaking mould in the vat of fibres and water to form sheets of paper using a technique called nagashizuki. Washi has been manufactured and used in Japan from more than 1000 years. In 2014, three kinds of washi were added to UNESCO’s Representative List of the Intangible Cultural Heritage of Humanity: sekishu-banshi, hon-minoshi, and hosokawa-shi. Nowadays there is no clear definition of what can or can’t be called washi. It can be manufactured by machine or by hand, using a flexible Japanese mould or a fixed paper mould, with or without chemicals. Some kinds of washi contain imported kozo or wood pulp fibres.
    [Show full text]
  • Papermaking: Then and Now. a History of Hand Papermaking from Its Beginning, Plus a Process for Using Natural Fibers to Make Paper
    DOCUMENT RESUME ED 440 909 SO 031 615 AUTHOR Vickerman, Kathrine D. TITLE Papermaking: Then and Now. A History of Hand Papermaking from Its Beginning, Plus a Process for Using Natural Fibers To Make Paper. PUB DATE 1995-00-00 NOTE 93p.; Photographs by Lyssa O'Riley. PUB TYPE Guides Non-Classroom (055)-- Reports Descriptive (141) EDRS PRICE MF01/PC04 Plus Postage. DESCRIPTORS Art Education; Art History; Elementary Secondary Education; *Handicrafts; *Paper (Material) IDENTIFIERS Applied Arts; *Grasses; Historical Background; Historical Research; *Papermaking ABSTRACT In addition to a historic overview of papermaking, this book explains the painstaking process of papermaking and details the results of actually making paper from samples of grass gathered from Arizona to ;:ianesota, and Maine to California, including 11 sL.a;:es ana :iimates. The book describes how to teach papermaking and offers a list of equipment suppliers as resources for help getting started. A study of the effects of rainfall and altitude on the grasses used in making paper was conducted. The handmade paper shown in this book is only an example of what can be accomplished. Since there are so many different varieties of grass, this project has only scratched the surface of the potential for decorative paper made from grasses. The book is divided into the following sections: (1) "The Beginning of Papermaking"; (2) "Renaissance of Hand Papermaking"; (3) "Chemistry of Hand Papermaking"; (4) "A Little Bit about Grasses"; (5) "Papermaking from Grasses"; (6) "Papermaking Results"; and (7)"Teaching Hand Papermaking." (Contains 25 resources and 13 relevant Web sites.) (BT) Reproductions supplied by EDRS are the best that can be made from the original document.
    [Show full text]
  • Handmade Gampi
    Table of Contents Introduction ........................................................................ 2 About Us & Ordering Terms ............................................ 3 History of Washi ................................................................ 4 Japanese Papermaking .................................................... 5 Differences Between Washi and Western Paper ................... 7 Where our Washi Comes From ...................................... 8 Paper Specifications ........................................................ 11 Pricelist ............................................................................... 16 Fine Art and Conservation Handmade Papers ............................................. 20 Machinemade Papers ....................................... 26 Gampi Papers ..................................................... 29 Large Size Papers .............................................. 31 Small Size/ Specialty Papers .......................... 34 Rolls 100% Kozo Rolls ................................................ 36 Kozo Mix Rolls ................................................... 38 100% Sulphite Pulp Rolls ................................. 38 Inkjet Coated Rolls ........................................... 39 Gampi Rolls ........................................................ 39 Rayon Rolls ......................................................... 40 Decorative Rolls ................................................ 40 Decorative ........................................................................
    [Show full text]
  • Characterization of Korean Handmade Papers Collected in a Hanji
    Han et al. Herit Sci (2021) 9:96 https://doi.org/10.1186/s40494-021-00570-9 RESEARCH ARTICLE Open Access Characterization of Korean handmade papers collected in a Hanji reference book Bin Han1,2* , Léon‑Bavi Vilmont2, Hyoung‑Jin Kim3, Bertrand Lavédrine2, Shouji Sakamoto4 and Michel Sablier2 Abstract Korean hand papermaking is a renowned cultural tradition in the Korean peninsula. It is still practiced while scientifc analysis of paper itself from a large data set is rare. In this study, a set of more than three hundred Korean handmade papers, collected in a reference collection book Hanji: Korean handmade paper, were chemically investigated, and their property data such as colour, pH, grammage, thickness, tensile strength, folding endurance were statistically analysed in order to determine general features for Korean papers. The infuence of diferent paper sheet formation methods (Heullimtteugi vs Gadumtteugi) were revealed by multivariate data analysis and the chemical profles of raw materi‑ als were studied by pyrolysis–gas chromatography/mass spectrometry (Py-GC/MS). The Korean handmade paper samples display colour gamut in the colour space L* (69.9–95.9), a* [( 3)-3], b* (0–20), most have neutral/alkaline pH values. Paper density, fber orientation and physical properties are infuenced− by the sheet formation techniques. For instance, Gadumtteugi tends to produce papers with strong fber orientation while Heullimtteugi produces papers with more evenly distribution of fbers. In addition, Py-GC/MS analysis results show that paper mulberry fbers contain less intensity lignin monomers and more terpenic compounds in comparison with gampi and mitsumata fbers. This study provides paper analysis from large sample set, statistics reveal that the material preparing and making craft determined the paper structure which refected in their physical properties.
    [Show full text]
  • Handmade Paper: a Review of Its History, Craft, and Science
    REVIEW ARTICLE bioresources.com HANDMADE PAPER: A REVIEW OF ITS HISTORY, CRAFT, AND SCIENCE Martin A. Hubbe a* and Cindy Bowden b For over 2000 years the manual craft of papermaking has been practiced all over the world utilizing a variety of techniques. This review describes the evolution of hand papermaking and its cultural significance. Paper’s evolution has been shaped by the structure and chemical composition of the fibers. Almost every aspect of modern papermaking technology has been foreshadowed by traditional practices. Such practices were passed down for many generations within families of papermakers. The main sources of cellulosic fiber evolved as the ancient craft migrated from its birthplace in China to Korea and Japan, the Islamic world, and then to Europe and America. Though most paper made today comes from automated, continuous production systems, handmade paper has enjoyed a resurgence, both as a traditional craft and as an art-form. In addition, traditional papermaking methods can provide insights to help in modern applications involving cellulosic fibers. Keywords: Handmade paper; History; Handcraft; Science; Cellulosic fibers Contact information: a: Department of Forest Biomaterials; North Carolina State University; Campus Box 8005; Raleigh, NC 27695-8005 USA; b: Robert C. Williams American Museum of Papermaking, Inst. of Paper Science and Technology, Mail Code 0620, Georgia Tech., Atlanta, GA 30332-0620; *Corresponding author: [email protected] INTRODUCTION Whenever people engage their hands and minds to make paper, there is a continuing opportunity for evolution of the craft. Each maker adopts or selectively omits parts of the methods that have been passed down to them, sometimes inventing new techniques.
    [Show full text]
  • The Journal of the Walters Art Museum
    THE JOURNAL OF THE WALTERS ART MUSEUM VOL. 73, 2018 THE JOURNAL OF THE WALTERS ART MUSEUM VOL. 73, 2018 EDITORIAL BOARD FORM OF MANUSCRIPT Eleanor Hughes, Executive Editor All manuscripts must be typed and double-spaced (including quotations and Charles Dibble, Associate Editor endnotes). Contributors are encouraged to send manuscripts electronically; Amanda Kodeck please check with the editor/manager of curatorial publications as to compat- Amy Landau ibility of systems and fonts if you are using non-Western characters. Include on Julie Lauffenburger a separate sheet your name, home and business addresses, telephone, and email. All manuscripts should include a brief abstract (not to exceed 100 words). Manuscripts should also include a list of captions for all illustrations and a separate list of photo credits. VOLUME EDITOR Amy Landau FORM OF CITATION Monographs: Initial(s) and last name of author, followed by comma; italicized or DESIGNER underscored title of monograph; title of series (if needed, not italicized); volume Jennifer Corr Paulson numbers in arabic numerals (omitting “vol.”); place and date of publication enclosed in parentheses, followed by comma; page numbers (inclusive, not f. or ff.), without p. or pp. © 2018 Trustees of the Walters Art Gallery, 600 North Charles Street, Baltimore, L. H. Corcoran, Portrait Mummies from Roman Egypt (I–IV Centuries), Maryland 21201 Studies in Ancient Oriental Civilization 56 (Chicago, 1995), 97–99. Periodicals: Initial(s) and last name of author, followed by comma; title in All Rights Reserved. No part of this book may be reproduced without the written double quotation marks, followed by comma, full title of periodical italicized permission of the Walters Art Museum, Baltimore, Maryland.
    [Show full text]
  • Information Sanitization and Destruction Federal, State & Local Government Resource and Purchasing Guide
    Information Sanitization and Destruction Federal, State & Local Government Resource and Purchasing Guide 2012 Veteran Owned Small Business paper shredders | disintegrators | magnetic media degaussers hard drive destroyers | optical media destroyers | mixed media destroyers briquetting systems | deployment cases | destruction services www.semshred.com | 800.225.9293 SECURITY ENGINEERED MACHINERY...A Tradition of Innovation and Excellence SEM is in the business of providing customers with information destruction solutions. Regardless of the media that information is stored on, we provide solutions for all levels of destruction up to and including NSA specifications for classified information. In fact, unlike our competitors, who sell everything from pens and paper to time clocks and paper folding equipment, SEM’s only business is providing destruction solutions. Whether it's an off-the- shelf product or an engineered system designed from the ground up, our business focus is to provide the absolute best solution for our customers' information destruction requirements. SEM is a Veteran Owned Small Business founded in 1967 and based in Westboro, Massachusetts. Our first product was a destruction solution for the U.S. Navy - the world's first disintegrator. Since then, SEM has expanded our products to coincide with the development of various other storage media. Our customers include leading FORTUNE 500 Companies, the Federal Government, U.S. Military, and scores of other Federal and State Agencies. Today, every U.S. Embassy in the world uses
    [Show full text]
  • SUSTAINABILITY Report
    2018 SUSTAINABILITY report 2018 report SUSTAINABILITY SUSTAINABILITY report 2018 4 1 2018 report ABOUT US GLOBALIZATION AND PEOPLE OF 1 2 EFFICIENCY 3 EXCELLENCE 04 CHAIRMAN’S STATEMENT 24 OUR BUSINESSES 60 OUR TEAM 08 ABOUT ARAUCO 44 FINANCIAL PERFORMANCE 70 COMPREHENSIVE DEVELOPMENT 12 SUSTAINABILITY STRATEGY 48 INNOVATION 74 IDENTITY, COMMITMENT AND CLIMATE SUSTAINABILITY 14 CORPORATE GOVERNANCE 54 OUR PRODUCTS 78 CONTRACTS AND COLLECTIVE AGREEMENTS 18 CORPORATE BEST PRACTICES MANAGEMENT 20 RISKS AND CHALLENGES OCCUPATIONAL COMMUNITY ENVIRONMENTAL 4 HEALTH AND SAFETY 5 6 MANAGEMENT CONTENTS 82 SAFETY 102 COMMUNITY, PARTICIPATION AND DIALOGUE 126 ENVIRONMENTAL MANAGEMENT IN THE FORESTRY BUSINESS 92 OCCUPATIONAL HEALTH 106 COMMUNITY PROGRAMS 144 ENVIRONMENTAL MANAGEMENT IN INDUSTRIAL FACILITIES 96 JOINT COMMITTEES 112 PARTICIPATION PROCESSES AND DIALOGUE 7 SCOPE 8 APPENDICES 162 SCOPE 166 ARAUCO SUBSIDIARIES AND SHARES 168 MEMBERSHIP AND NETWORKS 174 GLOBAL GRI INDEX 2 3 2018 report SUSTAINABILITY CHAIRMAN`S STATEMENT For ARAUCO, 2018 was a special year, during which we le; the purchase of two Masisa industrial complexes in deepened commitments and projects, contributing to the Mexico, Durango and Zitacuaro at the beginning of 2019, development of the industry and the communities of which and the process of voluntary citizen participation and we are part. This has allowed us to continue to position presentation of the environmental impact study to the ourselves. We are a global player, thanks to work carried Environmental Impact Assessment Service of the Wind out with high standards by an exceptional workforce. Viento Sur wind farm, located in Arauco commune, Chile. Promoting the use of a renewable resource such as wood We have developed all these advances with a long- is at the heart of our strategic development.
    [Show full text]
  • Green Chemistry and Sustainability in Pulp and Paper Industry
    Green Chemistry and Sustainability in Pulp and Paper Industry Pratima Bajpai Green Chemistry and Sustainability in Pulp and Paper Industry Pratima Bajpai C-103 Thapar Centre for Industrial R&D Consultant (Pulp and Paper) Patiala , India ISBN 978-3-319-18743-3 ISBN 978-3-319-18744-0 (eBook) DOI 10.1007/978-3-319-18744-0 Library of Congress Control Number: 2015942906 Springer Cham Heidelberg New York Dordrecht London © Springer International Publishing Switzerland 2015 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifi cally the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfi lms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specifi c statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. Printed on acid-free paper Springer International Publishing AG Switzerland is part of Springer Science+Business Media ( www.
    [Show full text]
  • SPECTRUM Issue 32
    O. 32 / 2-2015 N READY FOR THE AGE BIG STONE CHALLENGES OF FIBRE SCRUBBER MAGAZINE OF PULP & PAPER // MAGAZINE OF PULP & PAPER Montes del Plata // 14 Marco Mensink Interview // 29 Otter Tail Power // 38 FINE TUNING A passion for continuous improvement keeps this Brazilian mill on top // 6 2 NO. 32 / 2-2015 10 38 Switch on GREEN POWER solutions from ANDRITZ More and more companies are switch- ing on their GREEN POWER options. ANDRITZ offers a range of technologies for producing solid biofuels, liquid biofuels, and even energy from waste by-products. We have included several stories in this is- sue of SPECTRUM, highlighted with the GREEN POWER symbol, which show- case our customers’ successes with re- 24 32 newable energy technologies. CONTENTS 03 Management Message 20 OPE in Finland 38 Big Stone scrubber Kotkamills and Stora Enso Otter Tail Power 04 News 24 Turkish delight 53 Minimal mercury Kartonsan A.S. ANDRITZ Air Pollution Control 06 Fine tuning Veracel Celulose 29 The Age of Fibre has begun 46 Orders & Start-ups Interview Marco Mensink 10 Kiln conversion Sappi North America 47 Did you know that? 32 Energy and revenue Harmac Pacific 14 Ready for the next challenge Montes del Plata 35 New generation drying TechTalk On the cover: Fine Tuning (page 6), Cover/page 6: Stokkete - shutterstock.com SPECTRUM is published by: Editorial Director: General information and copyright: ANDRITZ AG Robert Puhr You will see the use of both “tonnes” and Stattegger Strasse 18 [email protected] “tons” in this publication: tonnes for metric 8045 Graz, Austria Editorial Board: units and tons for American units.
    [Show full text]
  • Pages 1-11.Indd
    www.legionpaper.com www.moabpaper.com www.risingmuseumboard.com www.solvart.com © Copyright 2019 Legion Paper Corporation All Rights Reserved. No portion of this publication may be reproduced without the permission of Legion Paper. OUR ROMANCE WITH PAPER Peace treaties are signed on it. Declarations of love are written on it. Artists’ works are portrayed on it. Of course, we mean paper; the medium that has evolved to reflect its own poetry, becoming an opportunity for pure innovation and unlimited creativity. Through the years, a melding of ancient craft and enlightened technology occurred, creating new practices and opening new horizons for expression in paper. When we trace its history, we find insight into man’s relentless imagination and creativity. Today, this convergence of ancient and modern continues and paper emerges with not only greater variety but a renewed appreciation of quality. To some, fine paper is the space that translates what is conceived in the mind to what is authentic. To others, having access to the right paper represents abundant possibility and profitability. The very selection of paper now becomes an adventure, realizing how the end result will vary based upon choice. Today, as in the years past, Legion Paper continues to source the finest papermakers around the globe, respecting the skill of the artisan and the unique attributes of the finished product. As we head into the future, Legion remains steadfast in its commitment to diversity, customer service and an unparalleled level of professionalism. We’re sure you will want to touch and feel some of the 3,500 papers described on the following pages.
    [Show full text]
  • Brill's Encyclopedia of Buddhism
    Brill’s Encyclopedia of Buddhism Volume I Literature and Languages Preview Editor-in-Chief: Jonathan A. Silk Consulting Editors: Oskar von Hinüber Vincent Eltschinger preview_BEB_v3.indd 1 31-07-14 10:57 Brill’s Encyclopedia of Buddhism (6 vols.) Editor-in-Chief: Jonathan A. Silk, Leiden University Consulting Editors: Oskar von Hinüber, Albert-Ludwigs University of Freiburg, and Vincent Eltschinger, Austrian Academy of Sciences Set (6 vols.) • brill.com/enbu • ISBN 978 90 04 28469 2 • Hardback (6 vols. of approx. 750 pp. each) • List price EUR 1245.- / US$ 1944.- • Handbook of Oriental Studies. Section 2 South Asia, 29/1-6 Volume 1: Buddhist Literatures • brill.com/ho2-ho2-29 • Forthcoming 2015 • ISBN 978 90 04 28343 5 • Hardback (approx. 750 pp.) • List price EUR 249.- / US$ 346.- • Handbook of Oriental Studies. Section 2 South Asia, 29/1 It has been evident for many years that no authoritative, reliable, and up-to-date reference work on Buddhism yet exists in any language. Brill’s Encyclopedia of Buddhism aims to fill that gap with a comprehensive work, presented in two phases: a series of six thematic volumes including an index volume, addressing issues of global and regional importance, to be followed by an ever-expanding online resource providing access both to synthetic and comprehensive treatments and to more individuated details on persons, places, texts, doctrinal matters, and so on. Illustrated with maps and photographs, and supplemented with extensive online resources, the print version of the thematic encyclopedia will present the latest research on the main aspects of the Buddhist traditions in original essays written by the world’s foremost scholars.
    [Show full text]