DOCSLIB.ORG

NOVECENTO Ontwerpduo

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
NOVECENTO Ontwerpduo NOVECENTO Ontwerpduo Time and time again, Ontwerpduo surprises with Ontwerpduo’s designers Tineke Beunders designs that convey indisputable functionality and Nathan Wierink complement each other and beauty. This is no different for the glass jars perfectly. Tineke is the creative half of the with matching lids made of warm acacia wood. duo. Her ideas are executed flawlessly by The lids can also be used as plates or bowls. Nathan. This also applies to this outstanding Both the transparent and the pink jars and their one-litre borosilicate glass carafe which they lids are available in medium and large versions. designed for Serax. The cap is itself a small carafe that you can fill with syrup, for example. Ideal for a refreshing and original aperitif. ONTWERPDUO Ontwerpduo, an established name in the world of design, has roots that go further back than their registration with the Chamber of Commerce in 2008. Tineke Beunders and Nathan Wierink had already formed a team back when they were still studying at the Design Academy. Quite a special duo, the very definition of the concept ‘complementary’. New functions for existing objects always sprout from Tineke Beunders’ imagination, often completely ignoring any practical and technical aspects. These fantasy objects often take on seemingly impossible shapes, but then Nathan Wierink steps in. In his workshop, which is starting to look more like a laboratory, he gets to work on Tineke’s designs, and when he comes back out, it always appears that his partner’s ideas were feasible after all. VELDKANT 21 - 2550 KONTICH - BELGIUM - T +32 3 458 05 82 - F +32 3 458 05 84 - WWW.SERAX.COM NOVECENTO Ontwerpduo MATERIALS Normal glass + acacia wood Finishing version 1: Clear glass Finishing version 2: Clear pink glass Finishing wood: Sanding without surface treatment Production : Mouth-blown glass OPERATIONAL USAGE Tableware Food safe Microwave proof : No Dishwasher proof : No Oven Proof : No Salamander Proof : No SPECIAL CARE We advise to wash by hand using soft sponge + soft detergents. INSTRUCTIONS PACKAGING Gift box Volume & dimensions of the complete range available upon request. VELDKANT 21 - 2550 KONTICH - BELGIUM - T +32 3 458 05 82 - F +32 3 458 05 84 - WWW.SERAX.COM NOVECENTO Ontwerpduo MATERIALS Normal glass + acacia wood Finishing version 1: Clear glass Finishing version 2: Clear pink glass Finishing wood: Sanding without surface treatment Production : Mouth-blown glass OPERATIONAL USAGE Tableware Food safe Microwave proof : No Dishwasher proof : No Oven Proof : No Salamander Proof : No SPECIAL CARE We advise to wash by hand using soft sponge + soft detergents. INSTRUCTIONS PACKAGING Gift box Volume & dimensions of the complete range available upon request. VELDKANT 21 - 2550 KONTICH - BELGIUM - T +32 3 458 05 82 - F +32 3 458 05 84 - WWW.SERAX.COM NOVECENTO Ontwerpduo MATERIALS Potassium glass Composition: Silicon dioxide (73%), Sodium oxide (9%), Potassium oxide (5,5%), Zinc oxide (6,9%), Barium oxide (3,9%), Boron oxide (1,7%) Firing temperature: 580°C Production: Mouth blown Thermal shock resistance: 450°C OPERATIONAL USAGE Accessories SPECIAL CARE We advise to use soft detergents for commercial dishwashers. INSTRUCTIONS PACKAGING Gift box Volume & dimensions of the complete range available upon request. VELDKANT 21 - 2550 KONTICH - BELGIUM - T +32 3 458 05 82 - F +32 3 458 05 84 - WWW.SERAX.COM.
Load more

Recommended publications
  • Glossary of Terms Abrisa Technologies Your Single Source Optics Partner!
    Glossary of Terms Abrisa Technologies Your Single Source Optics Partner! December 2015 200 South Hallock Drive, Santa Paula, CA 93060 • (877) 622-7472 • FAX (805) 525-8604 • www.abrisatechnologies.com Glossary of Terms - 12/15 2 of 13 Acid Etching This process for the decoration of glass involves the application of hydrofluoric acid to the glass surface. Hydrofluoric acid vapors or baths of hydrofluoric acid salts may be used to give glass a matte, frosted appearance (similar to that obtained by surface sandblasting), as found in lighting glass. Glass designs can be produced by coating the glass with wax and then inscribing the desired pattern through the wax layer. When applied, the acid will corrode the glass but not attack the wax-covered areas. Alumina-silicate Glass Alumina (aluminum oxide Al2O3) is added to the glass batch in the form of commonly found feldspars containing alkalis in order to help improve chemical resistance and mechanical strength, and to increase viscosity at lower temperatures. Angle of Incidence The angle formed between a ray of light striking a surface and the normal line (the line perpendicular to the surface at that point). Annealing Under natural conditions, the surface of molten glass will cool more rapidly than the center. This results in internal stress- es which may cause the glass sheet or object to crack, shatter or even explode some time later. The annealing process is designed to eliminate or limit such stresses by submitting the glass to strictly controlled cooling in a special oven known as a “lehr”. Inside the lehr, the glass is allowed to cool to a temperature known as the “annealing point”.
    [Show full text]
  • The Pennsylvania State University
    The Pennsylvania State University The Graduate School ADVENTURES IN HIGH DIMENSIONS: UNDERSTANDING GLASS FOR THE 21ST CENTURY A Dissertation in Material Science and Engineering by Collin James Wilkinson © 2021 Collin James Wilkinson Submitted in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy May 2021 ii The dissertation of Collin Wilkinson was reviewed and approved by the following: John Mauro Professor of Materials Science and Engineering Chair, Intercollege Graduate Degree Program Associate Head for Graduate Education, Materials Science and Engineering Dissertation Advisor Chair of Committee Seong Kim Professor of Chemical Engineering Professor of Materials Science and Engineering Ismaila Dabo Associate Professor of Materials Science and Engineering Susan Sinnott Professor of Materials Science and Engineering Professor of Chemistry Head of the Department of Materials Science and Engineering iii Abstract Glass is infinitely variable. This complexity stands as a promising technology for the 21st century since the need for environmentally friendly materials has reached a critical point due to climate change. However, such a wide range of variability makes new glass compositions difficult to design. The difficulty is only exaggerated when considering that not only is there an infinite variability in the compositional space, but also an infinite variability thermal history of a glass and in the crystallinity of glass-cearmics. This means that even for a simple binary glass there are at least 3 dimensions that have to be optimized. To resolve this difficulty, it is shown that energy landscapes can capture all three sets of complexity (composition, thermal history, and crystallinity). The explicit energy landscape optimization, however, has a large computational cost.
    [Show full text]
  • New Glass Review 10.Pdf
    'New Glass Review 10J iGl eview 10 . The Corning Museum of Glass NewG lass Review 10 The Corning Museum of Glass Corning, New York 1989 Objects reproduced in this annual review Objekte, die in dieser jahrlich erscheinenden were chosen with the understanding Zeitschrift veroffentlicht werden, wurden unter that they were designed and made within der Voraussetzung ausgewahlt, dal3 sie the 1988 calendar year. innerhalb des Kalenderjahres 1988 entworfen und gefertigt wurden. For additional copies of New Glass Review, Zusatzliche Exemplare des New Glass Review please contact: konnen angefordert werden bei: The Corning Museum of Glass Sales Department One Museum Way Corning, New York 14830-2253 (607) 937-5371 All rights reserved, 1989 Alle Rechtevorbehalten, 1989 The Corning Museum of Glass The Corning Museum of Glass Corning, New York 14830-2253 Corning, New York 14830-2253 Printed in Dusseldorf FRG Gedruckt in Dusseldorf, Bundesrepublik Deutschland Standard Book Number 0-87290-119-X ISSN: 0275-469X Library of Congress Catalog Card Number Aufgefuhrt im Katalog der KongreB-Bucherei 81-641214 unter der Nummer 81-641214 Table of Contents/lnhalt Page/Seite Jury Statements/Statements der Jury 4 Artists and Objects/Kunstler und Objekte 10 Bibliography/Bibliographie 30 A Selective Index of Proper Names and Places/ Verzeichnis der Eigennamen und Orte 53 er Wunsch zu verallgemeinern scheint fast ebenso stark ausgepragt Jury Statements Dzu sein wie der Wunsch sich fortzupflanzen. Jeder mochte wissen, welchen Weg zeitgenossisches Glas geht, wie es in der Kunstwelt bewer- tet wird und welche Stile, Techniken und Lander maBgeblich oder im Ruckgang begriffen sind. Jedesmal, wenn ich mich hinsetze und einen Jurybericht fur New Glass Review schreibe (dies ist mein 13.), winden he desire to generalize must be almost as strong as the desire to und krummen sich meine Gedanken, um aus den tausend und mehr Dias, Tprocreate.
    [Show full text]
  • Vitrification of Historic and Future High Level Nuclear Wastes Within Alkali Borosilicate Glasses
    Vitrification of historic and future high level nuclear wastes within alkali borosilicate glasses Andrew James Connelly M.Eng. A Thesis submitted to the Department of Engineering Materials at the University of Sheffield in partial fulfilment of the requirement for the Degree of Doctor of Philosophy. February 2008 The University Of Sheffield. Abstract The disposal of highly radioactive and toxic wastes generated by the nuclear industry is one of the biggest challenges facing the world today. Currently, in the UK there is a large legacy waste holding which has been accumulating since nuclear energy was first harnessed during World War 2. Processing of this waste with a view to final disposal is a complex and difficult task. This work investigates one aspect of that process, namely turning this waste into glass (or vitrification). This work uses multiple techniques including x-ray absorption spectroscopy, magic angle spinning nuclear magnetic resonance and molecular dynamic simulations, to investigate the structural role of Zr02 and U 03 within the alkali borosilicate glass used in the UK for waste immobilisation. The effect of these additions on the bulk glass structure and selected glass properties are also explored. In waste glasses Zr occurs as a 6 co-ordinated Zr ion surrounded by Si, B, Na and Li. The effect of Zr02 additions on the bulk glass structure and properties is highly complex. The addition of Zr02 appears to be characterised by a non-linearity in the trends of certain physical and structural parameters. At low levels of Zr02 the level of leaching from the glasses and the co­ ordination of B increase.
    [Show full text]
  • Technical Glasses
    Technical Glasses Physical and Technical Properties 2 SCHOTT is an international technology group with 130 years of ex­ perience in the areas of specialty glasses and materials and advanced technologies. With our high­quality products and intelligent solutions, we contribute to our customers’ success and make SCHOTT part of everyone’s life. For 130 years, SCHOTT has been shaping the future of glass technol­ ogy. The Otto Schott Research Center in Mainz is one of the world’s leading glass research institutions. With our development center in Duryea, Pennsylvania (USA), and technical support centers in Asia, North America and Europe, we are present in close proximity to our customers around the globe. 3 Foreword Apart from its application in optics, glass as a technical ma­ SCHOTT Technical Glasses offers pertinent information in terial has exerted a formative influence on the development concise form. It contains general information for the deter­ of important technological fields such as chemistry, pharma­ mination and evaluation of important glass properties and ceutics, automotive, optics, optoelectronics and information also informs about specific chemical and physical character­ technology. Traditional areas of technical application for istics and possible applications of the commercial technical glass, such as laboratory apparatuses, flat panel displays and glasses produced by SCHOTT. With this brochure, we hope light sources with their various requirements on chemical­ to assist scientists, engineers, and designers in making the physical properties, have led to the development of a great appropriate choice and make optimum use of SCHOTT variety of special glass types. Through new fields of appli­ products. cation, particularly in optoelectronics, this variety of glass types and their modes of application have been continually Users should keep in mind that the curves or sets of curves enhanced, and new forming processes have been devel­ shown in the diagrams are not based on precision measure­ oped.
    [Show full text]
  • Borosilicate Glass Wafers Are an Inexpensive Alternative
    Basics of Microstructuring 01 Chapter MicroChemicals® – Fundamentals of Microstructuring www.microchemicals.com/downloads/application_notes.html PRODUCTION AND SPECIFICATIONS OF GLASS WAFERS For applications where neither the high dielectric strength of quartz nor the high transparency is in the ultravi- olet, visible or infrared spectral range or the thermal stability of quartz or quartz glass is required, borosilicate glass wafers are an inexpensive alternative. Borosilicate Glass and Ordinary Glass in Comparison Composition Borosilicate glass consists of approximately 80% of silicon dioxide (SiO2) and approximately 5-15% boron trioxide (B2O3). Other additives are alkaline oxide (Na2O, K2O), aluminium oxide (Al2O3) and alkaline po- tassium oxide (CaO, MgO). Borosilicate glasses typically have a very low iron content, which causes the typical green colour of window glass in order to increase the transparency. Properties Due to its boron content, borosilicate glass exhibit a higher chemical stability against water, many chemi- cals and pharmaceutical products compared to window glass. In addition, borosilicate glass exhibits signifi cantly higher thermal stability against temperature fl uctua- tions due to its thermal expansion coeffi cients, which are less than half as large as compared to window glass. Production of Glass Wafers For the further processing into glass wafers, specifi c borosilicate glass is produced using the “fl oat pro- cess” (Fig. 37). Hereby the molten glass on melted tin forms a fl oating both-side smooth ribbon with a homogeneous thickness. On its way on the tin bath, the temperature is gradually reduced from 1100 down to 600°C until the sheet can be lifted onto rollers. Glass pane Glass melt Tin melt Fig.
    [Show full text]
  • The Bewildering Array of Owens-Illinois Glass Co. Logos and Codes
    The Bewildering Array of Owens-Illinois Glass Co. Logos and Codes Bill Lockhart and Russ Hoenig [In 2004, Lockhart wrote similar articles about maker’s marks and codes used by the Owens-Illinois Glass Co. for the Society for Historical Archaeology Newsletter and a collectors’ magazine. While these articles contained more detailed information than earlier works (e.g., Toulouse 1971), there were still problems with some of the identifications. The current study corrects the issues and explains past discrepancies. Parts of this study were taken from Lockhart 2007 (online version of 2004 article).] From its beginning in 1929, the Owens-Illinois Glass Co. has been a giant in the bottle and jar industry. Its history (see below) is filled with growth and innovation. As a result, there is probably no way to even estimate the billions of bottles that Owens-Illinois has produced during the more than 80 years of its tenure. That means, of course, that the Owens-Illinois manufacturer’s mark and codes are the most common of all logos found by historical archaeologists in excavations and surveys of post 1930 sites. The study of these marks and codes are therefore of great interest to archaeologists studying material culture. Bottle collectors were the first group outside of the bottle industry to be introduced to the Owens-Illinois codes via a letter from Julian Harrison Toulouse to May Jones, published in Volume 5 of The Bottle Trail (1965). Toulouse served his entire career as an employee of Owens-Illinois, and, as his retirement neared, he wrote numerous articles and two books aimed at bottle collectors.
    [Show full text]
  • Corning's Care and Safe Handling of Glassware Application Note
    Care and Safe Handling of Laboratory Glassware Care and Safe Handling of Laboratory Glassware CONTENTS Glass: The Invisible Container . 1 Glass Technical Data . 2 PYREX ® Glassware . 2 PYREXPLUS ® Glassware . 2 PYREX Low Actinic Glassware . 2 VYCOR ® Glassware . 2 Suggestions for Safe Use of PYREX Glassware . 3 Safely Using Chemicals . 3 Safely Handling Glassware . 3 Heating and Cooling . 4 Autoclaving . 4 Mixing and Stirring . 5 Using Stopcocks . 5 Joining and Separating Glass Apparatus . 5 Using Rubber Stoppers . 6 Vacuum Applications . 6 Suggestions for Safe Use of PYREXPLUS Glassware . 6 Exposure to Heat . 7 Exposure to Cold . 7 Exposure to Chemicals . 7 Exposure to Ultraviolet . 7 Exposure to Microwave . 7 Exposure to Vacuum . 7 Autoclaving . 7 Labeling and Marking . 8 Suggestions for Safe Use of Fritted Glassware . 8 Selecting Fritted Glassware . 8 Proper Care of Fritted Ware . 8 Suggestions for Safe Use of Volumetric Glassware . 9 Types of Volumetric Glassware . 9 Calibrated Glassware Markings . 9 Reading Volumetric Glassware . 9 Suggestions for Cleaning and Storing Glassware . 10 Safety Considerations . 10 Cleaning PYREX Glassware . 10 Cleaning PYREXPLUS Glassware . 12 Cleaning Cell Culture Glassware . 12 Rinsing, Drying and Storing Glassware . 13 Glass Terminology . 13 Care and Safe Handling of Laboratory Glassware GLASS: THE INVISIBLE MATERIAL Q PYREX glassware comes in a wide variety of laboratory shapes, sizes and degrees of accuracy — a design to meet From the 16th century to today, chemical researchers have used every experimental need. glass containers for a very basic reason: the glass container is transparent, almost invisible and so its contents and reactions While we feel PYREX laboratory glassware is the best all- within it are clearly visible.
    [Show full text]
  • The Current and Future State-Of-The-Art Glass Optics for Space-Based Astronomical Observatories
    The Current and Future State-of-the-art Glass Optics for Space-based Astronomical Observatories Abstract Recent technology advancements show significant promise in the ability to reduce the cost, schedule and risk associated with producing segmented Primary Mirrors (PMs) as well as monolithic optics larger than Hubble Space Telescope (HST) scale to the surface figure and smoothness required of current and future astronomical systems. This paper describes the present state-of-the art technology for glass mirrors at ITT and a path to next generation technology for use in a wide range of applications. In-process development activities will be discussed as well as the areas in which future investments can further enhance glass PM technologies. Active, passive, monolithic, and segmented mirror technologies will be discussed along with some basic descriptions of the different ways by which light-weighted glass mirror blanks are fabricated. There will be an emphasis on Corning’s Ultra Low Expansion (ULE®) and borosilicate optics, with some discussion of glass ceramics and other material substrates. The paper closes with a table that summarizes potential areas of investment that will continue to advance the state of the art for the use of glass and other materials in optical systems. Robert Egerman ITT Corporation 585-269-6148 [email protected] Co-Authors (from ITT) Gary Matthews Jeff Wynn* Charles Kirk Keith Havey *ITT Retiree Acknowledgments The authors would like to thank David Content from the NASA Goddard Space Flight Center for his continued support of the development of borosilicate corrugated optics and his efforts to further this technology through NASA’s Industrial Partnership Program.
    [Show full text]
  • 3-Dimensional Microstructural
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by ScholarBank@NUS 3-DIMENSIONAL MICROSTRUCTURAL FABRICATION OF FOTURANTM GLASS WITH FEMTOSECOND LASER IRRADIATION TEO HONG HAI NATIONAL UNIVERSITY OF SINGAPORE 2009 3-DIMENSTIONAL MICROSTRUCTURAL FABRICATION OF FOTURANTM GLASS WITH FEMTOSECOND LASER IRRADIATION TEO HONG HAI (B. Eng. (Hons.), Nanyang Technological University) A THESIS SUBMITTED FOR THE DEGREE OF MASTER OF ENGINEERING DEPARTMENT OF ELECTRICAL AND COMPUTER ENGINEERING NATIONAL UNIVERSITY OF SINGAPORE 2009 Acknowledgement ACKNOWLEDGEMENTS I would like to take this opportunity to express my appreciation to my supervisor, Associate Professor Hong Minghui for his guidance during the entire period of my Masters studies. He has been encouraging particularly in trying times. His suggestions and advice were very much valued. I would also like to express my gratitude to all my fellow co-workers from the DSI-NUS Laser Microprocessing Lab for all the assistance rendered in one way or another. Particularly to Caihong, Tang Min and Zaichun for all their encouragement and assistance as well as to Huilin for her support in logistic and administrative issues. Special thanks to my fellow colleagues from Data Storage Institute (DSI), in particular, Doris, Kay Siang, Zhiqiang and Chin Seong for all their support. To my family members for their constant and unconditioned love and support throughout these times, without which, I will not be who I am today. i Table of Contents TABLE OF CONTENTS ACKNOWLEDGEMENTS
    [Show full text]
  • Waste Forms for Actinides: Borosilicate Glasses
    Waste forms for actinides: borosilicate glasses Bernd Grambow SUBATECH (Ecole des Mines de Nantes, Université de Nantes, CNRS-IN2P3), 4 rue Alfred Kastler, 44307 Nantes, France Introduction The fate of actinides in the nuclear fuel cycle comprises all steps from mining and enrichment of uranium to fuel fabrication and fuel use in nuclear reactors until the moment when no reuse is anymore foreseeable, the moment where some uranium becomes waste together with other actinides. The actinides in the waste are formed by neutron capture during reactor irradiation of the nuclear fuel. The largest fractions of actinide containing wastes are in the form of spent nuclear fuel, for which in many countries no reuse is foreseen. Spent fuel is then conditioned by packaging in safe long-term tight containers. In other countries with closed nuclear fuel cycles, reprocessing industries extract uranium and plutonium from the spent nuclear fuel for reuse in the form of mixed oxide fuel (MOX) in nuclear reactors. Extraction yields are always lower than 100% and traces of uranium and plutonium remain in the waste stream. This high level liquid reprocessing waste will become vitrified in order to obtain a stable borosilicate waste glass matrix that provides protection against environmental dispersion. Since vitrified waste is in a solid form, transportation, storage and final geological disposal are facilitated. The glass products contain the non-extracted fraction of uranium and plutonium together with the minor actinides Am, Np and Cm and fission products such as (90Sr, 99Tc ou 137Cs) . Higher actinide loadings may occur in the future if reprocessing of MOX fuel is foreseen.
    [Show full text]
  • 2016-2017 Directory of Industry Supplies Artist Patty Gray Demonstrating Pro Series Combing at Pacific Artglass in Gardena, CA
    For the Creative Professional Working in Hot, Warm, and Cold Glass September/October 2016 $7.00 U.S. $8.00 Canada Volume 31 Number 5 2016-2017 Directory of Industry Supplies www.GlassArtMagazine.com Artist Patty Gray demonstrating Pro Series Combing at Pacific Artglass in Gardena, CA. The Artist Patty Gray was introduced to glass blowing in 1973. She and her husband built their first glass- The Kiln blowing studio in 1975. Together they have been The GM22CS com- producing architectural fused/cast glasswork monly referred to for installations in major hotels, public buildings as “The Clamshell” ,and private residences for over ten years. Patty is particularly well is constantly on the road sharing her knowledge suited for combing of fusing in workshops all over the world. To see because of it’s easy more of Patty’s work visit: access design and the www.pattygray.com fact that a tilt switch cuts the power to the Combing elements whenever Combing is a technique used to distort patterns the lid is opened to prevent electrical shock. in molten glass for interesting effects. Typically a For more information on the GM22CS visit our tile is made of fused, varied-color strips of glass website at: and heated to a point where it is soft enough to www.glasskilns.com “comb” with stainless steel rods. The piece can then be blown into a vessel using a process called “a pick up” like the piece shown here. For more information on combing visit: www.glasskilns.com/proseries/combing Patty GrayV4.indd 1 12/13/11 8:53:09 AM Letter from the Editor 4 The Season
    [Show full text]