MYLK2, Active MYLK2, Active
Total Page:16
File Type:pdf, Size:1020Kb
Catalogue # Aliquot Size M63-10H-05 5 µg M63-10H-10 10 µg M63-10H-20 20 µg MYLK2, Active Full-length recombinant protein expressed in Sf9 cells Catalog # M63-10H Lot # E1 65-4 Product Description Specific Activity Recombinant full-length human MYLK2 was expressed by baculovirus in Sf9 insect cells using an N-terminal His tag. 84,000 The gene accession number is NM_033118 . 63,000 Gene Aliases 42,000 skMLCK, KMLC, MLCK, MLCK2 21,000 (cpm) Activity Formulation 0 0 10 20 30 40 Protein (ng) Recombinant protein stored in 50mM sodium phosphate, pH 7.0, 300mM NaCl, 150mM imidazole, 0.1mM PMSF, The specific activity of MYLK2 was determined to be 238 0.25mM DTT, 25% glycerol. nmol/min/mg as per activity assay protocol. Storage and Stability Purity Store product at –70 oC. For optimal storage, aliquot target into smaller quantities after centrifugation and store at recommended temperature. For most favorable performance, avoid repeated handling and multiple The purity of MYLK2 was freeze/thaw cycles. determined to be >85% by densitometry. Scientific Background Approx. MW 74kDa . MYLK2 is a member of the myosin light chain kinase family and is a calcium/calmodulin dependent enzyme that is exclusively expressed in adult skeletal muscle (1). MYLK2 has been proposed to participate in signaling pathways (calcium signaling pathway, focal adhesion, regulation of actin cytoskeleton) and cellular processes MYLK2, Active (neuromuscular synaptic transmission, protein/amino acid Full-length recombinant human protein expressed in Sf9 cells phosphorylation). MYLK2 is involved in multiple molecular functions as a result of various subdomains that Catalog Number M63-10H participate in ATP binding, calmodulin binding, Specific Activity 238 nmol/min/mg nucleotide binding, protein serine/threonine kinase Specific Lot Number E165-4 activity and transferase activity) (2). Purity >85% Concentration 0.1 µ g/ µl Stability 1yr at –70 oC from date of shipment References Storage & Shipping Store product at –70 oC. For optimal storage, aliquot target into smaller 1. Soung, Y.H. et al:, Mutational analysis of the kinase domain quantities after centrifugation and of MYLK2 gene in common human cancers.Pathol Res store at recommended temperature. Pract. 2006;202(3):137-40. For most favorable performance, 2. Toth-Zsamboki, E. et al. P2X1-mediated ERK2 activation avoid repeated handling and multiple amplifies the collagen-induced platelet secretion by freeze/thaw cycles. Product shipped enhancing myosin light chain kinase activation.J. Biol Chem. on dry ice. 2003; 21;278(47):46661-7. To place your order, please contact us by phone 1-(604)-232-4600, fax 1-604-232-4601 or by email: [email protected] www.signalchem.com FOR IN VITRO RESEARCH PURPOSES ONLY. NOT INTENDED FOR USE IN HUMAN OR ANIMALS. Activity Assay Protocol Reaction Components Active Kinase (Catalog #: M63-10H) [33P]-ATP Assay Cocktail Active MYLK2 (0.1 µg/ µl) diluted with Kinase Dilution Prepare 250 µM [33P]-ATP Assay Cocktail in a designated Buffer III (Catalog #: K23-09 ) and assayed as outlined in radioactive working area by adding the following sample activity plot. (Note: these are suggested working components: 150 µl of 10mM ATP Stock Solution (Catalog #: dilutions and it is recommended that the researcher A50-09 ), 100 µl [ 33 P]-ATP (1mCi/100 µl), 5.75ml of Kinase Assay perform a serial dilution of Active MLCK for optimal Buffer I (Catalog #: K01-09 ). Store 1ml aliquots at –20 oC. results). Kinase Dilution Buffer III (Catalog #: K23 -09 ) 10mM ATP Stock Solution (Catalog #: A50-09 ) Kinase Assay Buffer I (Catalog #: K01-09 ) diluted at a Prepare ATP stock solution by dissolving 55mg of ATP in 10ml 1:4 ratio (5X dilution) with 50ng/ µl BSA solution. of Kinase Assay Buffer I (Catalog #: K01-09 ). Store 200 µl aliquots at –20 oC. Kinase Assay Buffe r I (Catalog #: K01 -09 ) Substrate (Catalog #: M89 -54G ) Buffer components: 25mM MOPS, pH 7. 2, 12.5mM β- LC20 protein substrate, 1mg/ml concentration. glycerol-phosphate, 25mM MgC1 2, 5mM EGTA, 2mM EDTA. Add 0.25mM DTT to Kinase Assay Buffer prior to use. Assay Protocol Step 1. Thaw [33P]-ATP Assay Cocktail in shielded container in a designated radioactive working area. Step 2. Thaw the Active MYLK2, Kinase Assay Buffer, Substrate and Kinase Dilution Buffer on ice. Step 3. In a pre-cooled microfuge tube, add the following reaction components bringing the initial reaction volume up to 20 µl: Component 1. 10 µl of diluted Active MYLK2 (Catalog #M63-10H) Component 2. 5µl of 1mg/ml stock solution of substrate (Catalog #M89-54G) Component 3. 2.5 µl of Ca 2+ / Calmodulin Solution II, 10x (Catalog #C02-39B) Component 4. 2.5 µl of distilled H 2O Step 4. Set up the blank control as outlined in step 3, excluding the addition of the substrate. Replace the substrate with an equal volume of distilled H 2O. Step 5. Initiate the reaction by the addition of 5 µl [ 33P]-ATP Assay Cocktail bringing the final volume up to 25 µl and incubate the mixture in a water bath at 30 oC for 15 minutes. Step 6. After the 15 minute incubation period, terminate the reaction by spotting 20 µl of the reaction mixture onto individual pre-cut strips of phosphocellulose P81 paper. Step 7. Air dry the pre-cut P81 strip and sequentially wash in a 1% phosphoric acid solution (dilute 10ml of phosphoric acid and make a 1L solution with distilled H2O) with constant gentle stirring. It is recommended that the strips be washed a total of 3 intervals for approximately 10 minutes each. Step 8. Count the radioactivity on the P81 paper in the presence of scintillation fluid in a scintillation counter. Step 9. Determine the corrected cpm by removing the blank control value (see Step 4) for each sample and calculate the kinase specific activity as outlined below. Calculation of [P 33]-ATP Specific Activity (SA) (cpm/pmol) Specific activity (SA) = cpm for 5 µl [33P] -ATP / pmoles of ATP (in 5 µl of a 250 µM ATP stock solution, i.e., 1250 pmoles) Kinase Specific Activity (SA) (pmol/min/ µµµg or nmol/min/mg) Corrected cpm from reaction / [(SA of 33P-ATP in cpm/pmol)*(Reaction time in min)*(Enzyme amount in µg or mg)]*[(Reaction Volume) / (Spot Volume)] To place your order, please contact us by phone 1-(604)-232-4600, fax 1-604-232-4601 or by email: [email protected] www.signalchem.com FOR IN VITRO RESEARCH PURPOSES ONLY. NOT INTENDED FOR USE IN HUMAN OR ANIMALS. .