Select the playback file type when a disc contains 1 Media type You can change the dynamic range while playing different types of files. 2 Playback status Dolby Audio encoded discs. • Audio: Plays back audio files. 3 Current playback item information • Wide: Reproduces powerful sound at a low • Still image: Plays back still picture files. (title no./chapter no./folder no./file no./track no.) volume level with its full dynamic range. • Video: Plays back video files. 4 Playing time • Normal: Reduces the dynamic range a little. • Audio&Video (Initial): Plays back audio files and 5 IN indicator (lights up while a disc is inserted) • Dialog (Initial): Reproduces movie dialog more video files. 6 Playback mode indicator (Repeat/Random) clearly. 7 File type indicator *1 For list of language codes, see page 57. *2 For playable file types, see page 56. If the disc contains no files of the selected type, the existing files are played in the following priority: audio, video, then still picture. You can change these settings only while playback is stopped.ENGLISH 11
00_KWV_2019ST_KR.indb 11 1/6/2018 8:19:12 AM Video
Video menu control operations Touching the operation keys performs the following [ ] Displays the picture adjustment screen. You can display the video menu control during video actions: 1 Touch [DIM ON] or [DIM OFF] to playback. 1 turn on or off the dimmer. • Available operation keys differ depend on the [ ]*1 Displays the picture size selection 2 Touch [+]/[–] to adjust the other selected disc type and file type. screen. items. 1 Touch [ Zoom] to change the • : Adjusts the brightness Video playback except VCD magnification level of the picture (−15 to +15). • : Adjusts the contrast Menu Control (Zoom1, Zoom2, Zoom3, Full: Initial). (−10 to +10). 2 Touch [J] [K] [H] [I] to move the • : Adjusts the blackness zooming frame. (−10 to +10). • : Adjusts the color [ ] Displays the aspect ratio selection (−10 to +10). screen. • : Adjusts the tint (−10 to +10). Touch [ Aspect] to select the aspect • : Adjusts the sharpness ratio. E.g. Video menu control screen for KW-V250BT/ (−2 to +2). KW-V25BT *2: For 16:9 original pictures 4:3 signal 16:9 signal [ ] Selects the audio type. [ ] Selects the subtitle type. [ ] : For viewing 4:3 pictures Selects the view angle. naturally on the wide screen 4:3 signal 16:9 signal *1 When [ ] is set to or , the picture is zoomed with the aspect ratio of the setting. This feature may not be used for some video sources. *2 Only for KW-V350BT Region 4: While DivX is played back with *2: For 4:3 original pictures set to [16:9] (Page 11 for discs/Page 14 4:3 signal 16:9 signal for USB), the aspect ratio may not be set correctly.
: For “DISC” source and “USB” source only: The aspect ratio is automatically selected to match the incoming signals.
12 ENGLISH
00_KWV_2019ST_KR.indb 12 1/6/2018 8:19:12 AM Video USB
2 Touching the operation keys performs the following You can connect a USB mass storage class device such actions: as a USB memory, digital audio player, etc. to the unit. [ MENU] Displays the disc menu (DVD). 1 • For playable file types and other information, see [T MENU] Displays the disc menu (DVD). pages 56 and 58. [ ] Switches to the direct disc menu mode. [ ] • You cannot connect a PC or portable HDD to the Touch the target item to select. [ ] Refer to “Video playback except VCD” on USB input terminal. page 12. [ ] Displays the menu/scene selection • You cannot connect a USB device via a USB hub. [ ] screen. J K H I • [ ] [ ] [ ] [ ]: Selects an item. 2 Connecting a USB device • [Enter]: Confirms the selection. • [Return]: Returns to the previous [ MENU] Displays the disc menu. USB device (commercially available) screen. [ ] Selects the audio channel (ST: stereo, L: left, R: right). KW-V250BT/KW-V25BT: On the monitor panel Video playback for VCD [ ]* Displays or hides the direct selection buttons. Menu Control 1 Touch [DIR/CLR] to select a track directly on a VCD. 2 Touch the numbers ([0], [1] to [9]) to KW-V350BT: On the rear panel select the desired track. 3 Touch [Enter] to confirm. To delete the last entry, touch [DIR/ CLR]. E.g. Video menu control screen for KW-V250BT/ KW-V25BT [Return] Displays the previous screen or menu.
* You need to stop playback to deactivate the PBC function when playing a VCD with PBC activated.
The source changes to “USB” and playback starts. • All tracks in the USB device will be played repeatedly until you change the source or disconnect the USB device.
ENGLISH 13
00_KWV_2019ST_KR.indb 13 1/6/2018 8:19:13 AM USB
Playback operations Selecting a folder/track on the list 2 Enter the alphabet to search. Touch the first letter you want to search for, then Playback information and key operation 1 Display the folder/track list. touch [OK]. • For playback information, see “Source control screen” On the source control screen, touch as follows: on page 7. Settings for USB playback • For key operations on the touch panel, see “Common operation keys on source control screen” on 1 Display the screen. page 8. 2 Select the folder (1), then the item (2) in On the source control screen, touch as follows: the selected folder. Selecting the file type to play USB
You can specify the file type to play. Folder Name 1 File Name 1 USB Folder Name 2 File Name 2 Folder Name 3 File Name 3 2 Make the settings. Folder Name 4 File Name 4 Folder Name 5 File Name 5 USB Mode Screen Ratio 16:9 Drive Select Next File type Audio E.g. USB list screen for KW-V250BT/KW-V25BT Select an item in each layer until you reach and E.g. USB source control screen for KW-V250BT/ select the desired file. KW-V25BT Select the monitor type to watch a wide screen Selecting a folder/track using alphabet picture on the external monitor. Select the file type as follows: search 16:9 (Initial) 4:3 LB 4:3 PS [Audio] Plays back audio files. (Applicable only for audio file type) [Video] Plays back video files. You can search for a folder or an audio file by entering the first letter you want to search for. [Photo] Plays back still picture files. 1 Select the list (folder or track) to search. If the USB contains no files of the selected type, the • Next: Switch between internal memory and the On the USB list screen, touch as follows: existing files are played in the following priority: audio, memory source of the connected device (such as video, then still picture. You can change these settings a mobile phone). only while playback is stopped.
• [ ]: Folder list • [ ]: Track list 14 ENGLISH
00_KWV_2019ST_KR.indb 14 1/6/2018 8:19:13 AM Android iPod/iPhone
Connecting an Android device Playback operations Connecting an iPod/iPhone This unit supports Android OS 4.1 and above. Playback information and key operation • For playable iPod/iPhone types and other Android (commercially available) information, see page 58. Android • You cannot watch video. AUDIO MODE Wired connection iPod/iPhone iPod/iPhone 30-pin Lightning model connector model STIW (commercially available) (commercially available) USB cable (commercially available) E.g. Android source control screen for KW-V250BT/ KW-V25BT KW-V250BT/KW-V25BT: On the monitor panel Touching the operation keys performs the following 30-pin to USB cable actions: USB Audio cable (accessory of iPod/ [S]/[T] Selects an audio file. for iPod/iPhone: iPhone) KS-U62 (optional KW-V350BT: On the rear panel [IW] Starts/pauses playback. accessory) KW-V250BT/ KW-V25BT: On the monitor KW-V350BT: panel On the rear panel
When connecting an Android device, “AUDIO MODE” is shown. You can control Android device using a media player application installed in the Android device.
The source changes to “iPod” and playback starts.
ENGLISH 15
00_KWV_2019ST_KR.indb 15 1/6/2018 8:19:13 AM iPod/iPhone Tuner
Bluetooth connection 2 Select a category (1), then select a Listening to the radio Pair the iPod/iPhone with this unit via Bluetooth. desired item (2). (Page 34) iPod The unit switches to FM alarm scene automatically
Artist 000000001 when receiving an alarm signal from FM broadcast. Selecting the playback device via the Playlists Artist Artist 000000002 Playback information on the source control connection method Album Artist 000000003 screen See on page 47 for more Songs Artist 000000004 KW-V250BT/KW-V25BT information. Podcasts Artist 000000005
Playback operations Select an item in each layer until you reach and Tuner select the desired file. Playback information and key operation • Available categories differ depending on the type • For playback information, see “Source control screen” of iPod/iPhone. on page 7. • For key operations on the touch panel, see “Common Settings for iPod/iPhone playback operation keys on source control screen” on page 8. 1 Display the screen. On the source control screen, touch as follows: Additional keys operations. Touching the operation KW-V350BT keys performs the following actions:
[ ] Switches the device on screen. (Page 47) 2 Make the settings.
iPod Mode
Selecting an audio file from the menu Artwork ON OFF 1 Display the audio menu. On the source control screen, touch as follows: • ON (Initial): Shows the artworks of the playing files. • OFF: Hides the artworks of the playing files.
16 ENGLISH
00_KWV_2019ST_KR.indb 16 1/6/2018 8:19:14 AM Tuner
1 Selects the band (AM/FM1/FM2/FM3) Operation keys on source control screen p 2 Text information • The following explanations state the operation keys [PTY]* (For FM RBDS features) • Touching [ H ] scrolls the text if not all of the text for KW-V250BT/KW-V25BT, unless stated otherwise. Enters PTY search mode. is shown. • The appearance of the operation keys may differ, 1 Touch [PTY]. • Touching [Radio Text] switches the information however the similar operation keys have the same 2 Touch and hold a PTY code to search between Radio Text, Radio Text Plus and PTY operations. for. code. • See also “Common operation keys on source control If there is a station broadcasting a 3 Current station frequency screen” on page 8. program of the same PTY code as you 4 Displays the preset stations window (Page 18) have selected, that station is tuned in. • To hide the window, touch [ I ]/[ ]. Touching the operation keys performs the following [SEEK] Changes the seek mode for [S]/[T]. 5 [P1] – [P5] actions: • AUTO1 (Initial): Auto search • (Touch) Selects a preset station. 6 • AUTO2: Tunes in preset stations one • (Hold) Presets the current station. after another 6 Displays/hides other available operation keys* [SSM ]* (Hold) Presets stations automatically. • MANU: Manual search 7 TI indicator [MONO ]* Activates monaural mode for better FM [S]/[T] Searches for a station. 8 ST/MONO indicator reception (stereo effect will be lost). • The search method differs according The ST indicator lights up when receiving an FM • The MONO indicator lights up while to the selected seek mode (see above). stereo broadcast with sufficient signal strength. monaural mode is activated. 9 Seek mode indicator • To deactivate, touch [MONO] again. p Operation keys* * Appears only when FM is selected as the source. [TI]* (For FM RBDS features) q Only for KW-V350BT: Playback source items shown Activates TI standby reception mode. on the Home screen. • When TI is activated, the unit is ready • Touching the playback source item changes the to switch to traffic information if playback source. available. The TI indicator lights up in white. * See the following “Operation keys on source control screen”. • If the TI indicator lights up in orange, tune into another station providing Radio Broadcast Data System signals. • The volume adjustment for Traffic Information is automatically memorized. The next time the unit switches to Traffic Information, the volume is set to the memorized level. • To deactivate, touch [TI] again.
ENGLISH 17
00_KWV_2019ST_KR.indb 17 1/6/2018 8:19:14 AM Tuner SiriusXM® Satellite Radio (Only for KW-V250BT/KW-V25BT/KW-V350BT Presetting stations in the memory Selecting a preset station Region 1) You can preset five stations for each band. Only SiriusXM® brings you more of what you love Select the band, then display the preset 1 to listen to, all in one place. Get over 140 channels, station window. including commercial-free music plus the best sports, Automatic presetting — SSM (Strong- On the source control screen, touch as follows: station Sequential Memory) (for FM only) news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Connect Vehicle On the source control screen, touch as follows: Tuner and subscription are required. For more information, visit . 2 Select a preset station. (Hold) Preparation Tuner
The local stations with the strongest signals are found AM FM1 P1 and stored automatically. FM1 Connecting the SiriusXM Connect Vehicle P2 FM1 Tuner P3 Manual presetting FM1 Perform this installation when you install the unit for P4 FM1 the first time. P5 1 Tune in to a station you want to preset. FM1 Antenna
E.g. Preset station window for KW-V250BT/ SiriusXM Connect Vehicle KW-V25BT Tuner (commercially available) 2 Select a preset number to store into. To hide the window: Touch [ I ] or [ ]. Rear panel
Tuner
AM FM1 P1 FM1
P2 FM1
P3 FM1
P4 FM1
P5 FM1 (Hold)
E.g. Tuner source control screen for KW-V250BT/ KW-V25BT The station selected in step 1 is stored into the preset number [P1] to [P5] you have selected.
18 ENGLISH
00_KWV_2019ST_KR.indb 18 1/6/2018 8:19:14 AM SiriusXM® Satellite Radio
Activating subscription Listening to the SiriusXM® Satellite Radio 1 Displays/hides other available operation keys* 2 Selects the band (SXM1/SXM2/SXM3/SXM4) 1 Check your Radio ID. Playback information on the source control 3 Channel number The SiriusXM Satellite Radio ID is required screen 4 Text information for activation and can be found by tuning to • Touching [ H ] scrolls the text if not all of the text KW-V250BT/KW-V25BT Channel 0 as well as on the label found on the is shown. SiriusXM Connect Vehicle Tuner and its packaging. • Touching [Song Title]/[Info]/[Category] • The Radio ID does not include the letters I, O, S or SiriusXM switches the information. F. 5 Displays the preset channel window (Page 21) • To hide the window, touch [ I ]/[ ]. 2 Activate the subscription. 6 [P1] – [P5] For users in the U.S.A: • (Touch) Selects a preset channel. • Online: Visit • (Hold) Presets the current channel. • Phone: Call SiriusXM Listener Care at 7 Playback status and time code for the buffered data 1-866-635-2349 and replay mode For users in Canada: • The time code shows you the point in the Replay • Online: Visit KW-V350BT buffer you are listening to. (E.g. “–5:00” means • Phone: Call XM Customer Care at 1-877-438-9677 that you are listening to audio that is 5 minutes 3 Confirm the activation. behind the current broadcast.) A confirmation message appears. Touch [Return]. SiriusXM 8 Replay time bar for replay mode • Black: The remaining capacity • Red (for KW-V250BT/KW-V25BT) / Blue (for KW-V350BT): The amount of buffered contents 9 Signal strength indicator p Seek mode indicator q Operation keys* w Only for KW-V350BT: Playback source items shown on the Home screen. • Touching the playback source item changes the playback source.
* See “Operation keys on source control screen” on page 20.
ENGLISH 19
00_KWV_2019ST_KR.indb 19 1/6/2018 8:19:14 AM SiriusXM® Satellite Radio
Operation keys on source control screen q • To list all the channels, touch [All Channels]. • The following explanations state the operation keys • Touch the info change key above the list [ ] Displays the screen. for KW-V250BT/KW-V25BT, unless stated otherwise. ([Channel]/[Artist]/[Song Title]/[Info]) to • The appearance of the operation keys may differ, [*] Starts/pauses the content replay. display other information in the following order: however the similar operation keys have the same [CHJ]/[CHK] Selects the channel. Channel, Artist, Song Title, Content Info. operations. • To select a channel, make sure • See also “Common operation keys on source control “SEEK1” is selected as the seek Presetting channels in the memory screen” on page 8. mode. • To select a preset channel, make You can preset five channels for each band. Touching the operation keys performs the following sure “SEEK2” is selected as the seek 1 Tune in to a channel you want to preset. actions: mode. 1 [MODE] Displays the Selecting a channel on the list screen. You can obtain information on channels or select a 2 Select a preset number to store into. [ ] (Hold) Registers the current artist to channel to listen to. SiriusXM the alert contents. Display the screen. 1 P1 [ ] (Hold) Registers the current song to On the source control screen, touch as follows: the alert contents. P2 [ ] Activates or deactivates the content P3 alert for traffic and weather. P4 J P5 (Hold) [SEEK] Changes the seek mode for [CH ]/ 2 Select a category (1), and then select a K [CH ]. channel (2). • SEEK1 (Initial): Skips to another E.g. SiriusXM source control screen for KW-V250BT/ available channel. Channel List Channel KW-V25BT • SEEK2: Skips to another preset All Channels 100Ch Channel Name channel. Category Name 1 105Ch Channel Name The channel selected in step 1 is stored into the Category Name 2 110Ch Channel Name preset number [P1] to [P5] you have selected. [SCAN] Starts TuneScan™. Category Name 3 115Ch Channel Name [S]/[T]/ Performs playback operations during Category Name 4 120Ch Channel Name [Live] content replay. [ ] Changes the page in the window to display other operation keys.
20 ENGLISH
00_KWV_2019ST_KR.indb 20 1/6/2018 8:19:14 AM SiriusXM® Satellite Radio
Selecting a preset channel Replaying content [*] Starts/pauses playback. S T You can pause, rewind and replay the contents from [ ]/[ ] Skips the current track/segment. 1 Select the band, then display the preset S the currently tuned channel. • Touching [ ] within 2 seconds channel window. • The SiriusXM Connect Vehicle Tuner continually of the beginning of the current On the source control screen, touch as follows: buffers up to 60 minutes of audio. track/segment returns to the • If you change to another channel during playback, previous track. S the buffered contents will be lost. • Touching [ ] after 2 seconds or • The time code is updated every second. more of the current track returns to the beginning of the track. 1 Display the operation keys for replay. 2 Select a preset channel. (Hold) Reverses/forwards search. On the source control screen, touch as follows: SiriusXM [Live] Returns to the live position. P1 Channel Name 100Ch P2 Channel Name 105Ch
P3 Channel Name 110Ch SiriusXM Satellite Radio features P4 Channel Name 115Ch 2 Perform the replay operations. P5 Channel Name SmartFavorites 120Ch SiriusXM User stored channels (P1 to P5) of the current band are recognized as SmartFavorites channels. SiriusXM E.g. Preset station window for KW-V250BT/ Connect Vehicle Tuner automatically buffers their KW-V25BT broadcast content in the background. When you select a SmartFavorite channel, you can rewind and replay up • You can also select a preset channel by touching to 30 minutes of any of the missed news, talk, sports or [P1] – [P5]. music content. To hide the window: Touch [ I ] or [ ]. E.g. Replay operation keys window for KW-V250BT/ • SmartFavorites is available only when you connect 3 Select “SEEK2” as the seek mode to jump KW-V25BT an SXV200 or later SiriusXM Connect Vehicle Tuner. to the selected preset channel. • If you change to another band, the buffered content is cleared and new channels in the current band will start buffering.
ENGLISH 21
00_KWV_2019ST_KR.indb 21 1/6/2018 8:19:15 AM SiriusXM® Satellite Radio
TuneStart™ Content Alert For teams 1 Display the screen. When you select a SmartFavorites channel, you can The unit informs you when receiving the content you On the source control screen, touch as follows: listen to the current song from the beginning. are interested in, such as music, information about a 1 Display the screen. sports team, weather and traffic information. On the source control screen, touch as follows: Registering items for Contents Alert You can register your favorite artists, songs or teams. Then, on the screen, touch as Up to 50 contents can be registered. follows: : [Enter] 2 Activate TuneStart™. For artists/songs 2 Select the league (1) and the team (2), On screen, touch as follows: While listening to your favorite artist/song: : [ON] then register into the content alert (3). On the source control screen, touch as follows: To deactivate TuneStart: Touch [OFF] in step 2. Alert Team Select League1 Team1 TuneScan™ League2 Team2 (Hold) League3 Team3 You can get a short preview of the songs you have League4 Team4 missed on each of your SmartFavorites music channels Touching the operation keys performs the following League5 Team5 and the currently tuned music channel. actions: Activate TuneScan™ to start scanning the first 6 seconds of the recorded music contents. [ ] (Hold) Registers the artist of the current song. On the source control screen, touch as follows: [ ] (Hold) Registers the current song.
The unit starts scanning.
• To select the previous/next content, touch [S] or [T]. • To end scanning and continue listening to the current song/content, touch [SCAN] again. • To exit scanning, touch and hold [SCAN].
22 ENGLISH
00_KWV_2019ST_KR.indb 22 1/6/2018 8:19:15 AM SiriusXM® Satellite Radio
Selecting items for Content Alert To delete the registered items: Touch and hold the Activating Content Alert item you want to delete in step 2. You can select items (artists/songs/teams) from the The [ ] icon and a check mark appear beside the For artists/songs/teams registered items on the list to inform you once the unit selected item. Touch the [ ] icon to delete. 1 Display the screen. receives the information. On the source control screen, touch as follows: To delete all registered contents: Touch and hold For artists/songs/teams [All Clear ] for in 1 Display the step 1. screen. On the source control screen, touch as follows: For traffic and weather information 2 Activate Content Alert. 1 Display the screen. On screen, touch as follows: On the source control screen, touch as follows: : [ON] To deactivate Content Alert: Touch [OFF] in step 2.
Then, on the screen, touch as For traffic and weather information follows: Make sure is set to [ON], then on : [Set] 2 Select the city you desire traffic and the source control screen, touch as follows: 2 Select the category (1), then the item (2). weather information for.
Content Alerts Contents Set SiriusXM Mode
Content Alerts OFF Artist 000Ch Ch Name ON Content Alerts Contents Set Set All Clear Title 000Ch Ch Name Alert Team Select Enter Team 000Ch Ch Name • When a traffic and weather broadcast for the 000Ch Ch Name Traffic Weather Jump City Select selected city is received, the unit automatically Los Angeles 000Ch Ch Name switches the channel. SiriusXM Reset Reset To deactivate the Content Alert: Touch [ ] again. A check mark appears beside the selected item. • When traffic and weather broadcast is received, the • To show the details of the item, touch [ H ] or [<]. unit automatically switches the channel.
ENGLISH 23
00_KWV_2019ST_KR.indb 23 1/6/2018 8:19:15 AM SiriusXM® Satellite Radio
Switching to registered content Then, on the screen, touch as 2 Select the desired mode for . When an artist/song/team registered for Content Alert : [Change] is being broadcasted, an alert appears on the screen. [OFF] Deactivates parental control. 2 Enter the initial four-digit code (0000) (1), [Mature] Locks channels classified as “mature” Touch [Jump], then select the item to jump to on the and then touch [Enter] (2) to confirm. screen. by SiriusXM®. Parental Code Check Content Alerts [User] Locks selected channels. **** Artist 1/ Channel Name Clear 123 Artist 2/ Channel Name 3 Enter the parental code to confirm your Song 1/ Channel Name 456 Song 2/ Channel Name 789 selection. Team 1/ Channel Name Cancel 0 Enter Team 2/ Channel Name Parental Lock channel selection This option allows you to manually select the channels • To show the details of the item, touch [ H ] or [<]. • To clear the last entry, touch [Clear]. to be locked by the parental control feature. • To cancel setting the code, touch [Cancel]. • You can only change the setting if Setting reception restrictions 3 Enter a new four-digit code, then touch is set to [User]. [Enter] to confirm. 1 Display the screen. those with mature content. 4 Repeat step 3 above to confirm the new On the source control screen, touch as follows: code. Setting or changing the parental code • The initial setting is “0000”. Activating parental control • Changing the code does not change the You can set the parental control feature to lock any / screen, touch as Selection> settings. classified as “mature” by SiriusXM®. follows: : [SET] 1 Display the 1 Display the screen. screen. On the source control screen, touch as follows: 2 Enter the parental code. On the source control screen, touch as follows: The screen appears.
24 ENGLISH
00_KWV_2019ST_KR.indb 24 1/6/2018 8:19:16 AM SiriusXM® Satellite Radio Pandora® (Only for KW-V250BT/KW-V25BT/KW-V350BT 3 Select a category (1), then a channel (2). 2 Select a category (1), then a channel (2). Region 1) A check mark appears beside the selected channel. A check mark appears beside the selected channel. You can stream Pandora from iPhone/iPod touch or Parental Lock Channel Selection Skip Channel Selection Android devices. All Channels 100Ch Channel Name All Channels 100Ch Channel Name • Pandora is only available in certain countries. For Category Name 1 105Ch Channel Name Category Name 1 105Ch Channel Name more information, visit . Category Name 2 110Ch Channel Name Category Name 2 110Ch Channel Name • Because Pandora is a third-party service, the Category Name 3 115Ch Channel Name Category Name 3 115Ch Channel Name
Category Name 4 120Ch Channel Name Category Name 4 120Ch Channel Name specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become • To list all the channels, select [All Channels]. • To list all the channels, select [All Channels]. unavailable. • Some functions of Pandora cannot be operated from 4 Repeat step 3 to set the parental lock on 3 Repeat step 2 to skip multiple channels. this unit. multiple channels. • For issues using the application, contact Pandora at To clear the channel skipping for all skipped . To deactivate parental lock for all locked channels: channels: Touch and hold [All Clear ] for in step 1. Select [All Clear] for in step 1, then enter the parental code. Resetting the SiriusXM Satellite Radio Installing the application Skipping unwanted channels settings Your smartphone must has built in Bluetooth and the If you do not want to receive some channels, you can following profiles must be supported: You can reset all the SiriusXM settings you made and skip them. • SPP (Serial Port Profile) restore the initial settings. 1 Display the • A2DP (Advanced Audio Distribution Profile) 1 Display the screen. Establish an Internet connection using LTE, 3G, EDGE, screen. On the source control screen, touch as follows: or WiFi. On the source control screen, touch as follows: Ensure you are logged in to your smartphone application. If you do not have a Pandora account, you can create one for free from your smartphone or at . Then, on the screen, touch as 2 Reset the setting. follows: On the screen, touch and hold : [SET] as follows: : [Reset ]
ENGLISH 25
00_KWV_2019ST_KR.indb 25 1/6/2018 8:19:16 AM Pandora®
Install the latest version of the Pandora application on Playback operations 1 Displays/hides other available operation keys* your smartphone. 2 Picture data • For Android devices: Search for “Pandora” in Google Playback information and key operation 3 Track information Play to find and install the most recent version. H KW-V250BT/KW-V25BT • Touching [ ] scrolls the text if not all of the text • For iPhone/iPod touch: Search for “Pandora” in the is shown. Apple iTunes App Store to find and install the most 4 Operation keys* recent version. Pandora 5 Playing time/playback status 6 Only for KW-V350BT: Playback source items shown Connecting the device on the Home screen. For Android devices • Touching the playback source item changes the Pair the Android device with this unit via Bluetooth. playback source. (Page 34) * See the following “Operation keys on source control screen”. For iPhone/iPod touch • Via USB input terminal: Connect iPhone/iPod touch Operation keys on source control screen • The following explanations state the operation keys with the cable. (Page 15) KW-V350BT – For Lightning models: Use KS-U62 (optional for KW-V250BT/KW-V25BT, unless stated otherwise. accessory). • The appearance of the operation keys may differ, – For 30-pin connector models: Use 30-pin to USB however the similar operation keys have the same cable (accessory of iPod/iPhone). operations. • Via Bluetooth: Pair the iPhone/iPod touch with this • See also “Common operation keys on source control unit. (Page 34) screen” on page 8.
Selecting the device Touching the operation keys performs the following actions: For selecting the playback device via the connection 1 method to use, see on page 47. [ ] Adds the current artist to the station list. You can also operate Pandora with optional remote controller, RM-RK258. [ ] Adds the current track to the station list. You can only control play, pause and skip with the [ ] Bookmarks the current track. remote controller. [ ] Switches the device on screen. (Page 47)
26 ENGLISH
00_KWV_2019ST_KR.indb 26 1/6/2018 8:19:16 AM Pandora® iHeartRadio (Only for KW-V250BT/KW-V25BT/KW-V350BT 4 3 Select a station from the list. Region 1) [ ] Displays the list selection screen. On the station list: iHeartRadio is a free, all-in-one digital radio service that [ ] Thumbs down to the current track and Pandora lets you listen to your favorite live stations or create Shuffle skips to the next track. By Date commercial-free, all-music custom stations featuring Station Name By Name songs from the artists you select and similar music. [ ] Registers the current track as a favorite. Station Name Station Name IW [ ] Starts/pauses playback. Station Name You can stream iHeartRadio from iPhone/iPod touch or [T] Skips the current track. Station Name Android devices. • Not available when the Pandora skip • Because iHeartRadio is a third-party service, the reaches its limit. • To play all the songs in the registered stations specifications are subject to change without randomly, touch [Shuffle]. prior notice. Accordingly, compatibility may be impaired or some or all of the services may become Selecting a station from the list • To sort the list in reverse chronological order, touch [By Date]. unavailable. • Some functions of iHeartRadio cannot be operated 1 Display the list selection screen. • To sort the list in alphabetical order, touch [By from this unit. On the source control screen, touch as follows: Name]. • The indicator appears on the right of the • For issues using the application, contact iHeartRadio item when the station is shared. at .
On the genre list: Preparation 2 Select the list type. Pandora Installing the application Pandora Genre Name 1 Song Name 1 Genre Name 2 Song Name 2 Your smartphone must has built in Bluetooth and the Genre Name 3 Song Name 3 following profiles must be supported: Genre Name 4 Song Name 4 • SPP (Serial Port Profile) Station List Genre List Genre Name 5 Song Name 5 • A2DP (Advanced Audio Distribution Profile) Establish an Internet connection using LTE, 3G, EDGE, or WiFi. 1 Select a genre. Ensure you are logged in to your smartphone [Station List] Selects from the station names. 2 Select a station. application. If you do not have a iHeartRadio account, The selected station is added to the station list. you can create one for free from your smartphone or at [Genre List] Selects from the genres. .
ENGLISH 27
00_KWV_2019ST_KR.indb 27 1/6/2018 8:19:16 AM iHeartRadio
Install the latest version of the iHeartRadio application Playback operations 1 Displays/hides other available operation keys* on your smartphone. 2 Picture data • For Android devices: Search for “iHeartRadio for Auto” Playback information and keys operation 3 Track information in Google Play to find and install the most recent H KW-V250BT/KW-V25BT • Touching [ ] scrolls the text if not all of the text version. is shown. • For iPhone/iPod touch: Search for “iHeartRadio for 4 Operation keys* Auto” in the Apple iTunes App Store to find and iHeartRadio 5 Playback status install the most recent version. 6 Only for KW-V350BT: Playback source items shown on the Home screen. Connecting the device • Touching the playback source item changes the For Android devices playback source. Pair the Android device with this unit via Bluetooth. * See the following “Operation keys on source control screen”. (Page 34) Operation keys on source control screen For iPhone/iPod touch • The following explanations state the operation keys • Via USB input terminal: Connect iPhone/iPod touch KW-V350BT for KW-V250BT/KW-V25BT, unless stated otherwise. with the cable. (Page 15) • The appearance of the operation keys may differ, – For Lightning models: Use KS-U62 (optional however the similar operation keys have the same accessory). operations. – For 30-pin connector models: Use 30-pin to USB • See also “Common operation keys on source control cable (accessory of iPod/iPhone). screen” on page 8. • Via Bluetooth: Pair the iPhone/iPod touch with this unit. (Page 34) Touching the operation keys performs the following actions: Selecting the device 1 For selecting the playback device via the connection [ ] Creates a custom station from the currently method to use, see on playing track content information. page 47. You can also operate iHeartRadio with optional remote [ ] controller, RM-RK258. Saves the current station to the You can only control play, pause and skip with the list. remote controller. [ ]*1 Displays the variety level selection screen. [ ] Switches the device on screen. (Page 47)
28 ENGLISH
00_KWV_2019ST_KR.indb 28 1/6/2018 8:19:16 AM iHeartRadio
4 [Familiar] Distributes well-known tracks. Editing the list [ ] Displays the screen or [Mixed] Distributes a mix of artists and the station list. 1 Display the screen. track names. On the source control screen, touch as follows: [ ] Dislikes the currently playing content. [Less Familiar] Distributes a wide variety of [ ] Likes the currently playing content. tracks including lesser-known ones. [Io]*2 Starts/stops playback. Then, on the screen, touch as [IW]*1 Starts/pauses playback. Searching for a station follows: [SCAN]*2 Scans stations randomly. 1 Display the screen. [T]*1 Skips the current track. On the source control screen, touch as follows: *1 Appears only for the custom station screen. *2 Appears only for the live station screen. 2 Select stations (1), then delete the selected stations (2). Selecting the variety level for your custom 2 Select a station. • A check mark appears beside the selected station. station • The items displayed on the Station Edit screen differ depending on the information sent Station 01 1 Display the variety level selection screen. from iHeartRadio. Station 02 On the source control screen, touch as follows: Station 03 Station Search Station 04 Favorites Station 05 Recent Stations Station 06 Live Radio Artist Radio 2 Select the variety type. Podcasts • To return to the top layer, touch [ ]. • To return to the upper layer, touch [ ]. Discovery Tuner
Familiar Less Familiar • To return to the top layer, touch [ ]. • To return to the upper layer, touch [ ].
Mixed
ENGLISH 29
00_KWV_2019ST_KR.indb 29 1/6/2018 8:19:17 AM Spotify
With Spotify, your music is everywhere. Working out, Install the latest version of the Spotify application on Playback operations partying or relaxing, the right music is always at your your smartphone. fingertips. There are millions of songs on Spotify—from • For Android devices: Search for “Spotify” in Google Playback information and key operation old favorites to the latest hits. Just choose the music Play to find and install the most recent version. KW-V250BT/KW-V25BT you love, or let Spotify surprise you. • For iPhone/iPod touch: Search for “Spotify” in the Apple iTunes App Store to find and install the most You can stream Spotify from iPhone/iPod touch or recent version. Spotify Android devices. • Because Spotify is a third-party service, the Connecting the device specifications are subject to change without For Android devices prior notice. Accordingly, compatibility may be Pair the Android device with this unit via Bluetooth. impaired or some or all of the services may become (Page 34) unavailable. • Some functions of Spotify cannot be operated from For iPhone/iPod touch this unit. • Via USB input terminal: Connect iPhone/iPod touch • For issues using the application, contact Spotify at with the cable. (Page 15) KW-V350BT . – For Lightning models: Use KS-U62 (optional accessory). Preparation – For 30-pin connector models: Use 30-pin to USB Spotify cable (accessory of iPod/iPhone). Installing the application • Via Bluetooth: Pair the iPhone/iPod touch with this Your smartphone must has built in Bluetooth and the unit. (Page 34) following profiles must be supported: • SPP (Serial Port Profile) Selecting the device • A2DP (Advanced Audio Distribution Profile) For selecting the playback device via the connection Establish an Internet connection using LTE, 3G, EDGE, method to use, see on or WiFi. page 47. Ensure you are logged in to your smartphone You can also operate Spotify with a remote controller, application. If you do not have an Spotify account, you RM-RK258*1. can create one for free from your smartphone or at You can only control play, pause and skip with the . remote controller.
30 ENGLISH
03_KWV_2019ST_KR_Body01.indd 30 1/6/2018 8:48:01 AM Spotify
1 Displays/hides other available operation keys*2 Touching the operation keys performs the following Creating your station (Start Radio) 2 Picture data actions: Start Radio is to start a radio channel based on the 3 Track information 1 • Touching [ H ] scrolls the text if not all of the text currently played track. is shown. [ ]*1 Thumbs down to the current track and • Touching [ ]/[ ] changes the displayed skips to the next track. Create your station. information between artist ( ) and album ( ). [ ]*1 Registers the current track as a favorite. On the source control screen, touch as follows: 4 Operation keys*2 [ ]*2 *3 Activates/deactivates the shuffle 5 Playing time/playback status playback mode. 6 Progress bar 7 Only for KW-V350BT: Playback source items shown [ ]*2 Repeats all tracks/cancels the repeat on the Home screen. playback. Station is created and playback starts automatically. • Touching the playback source item changes the [ ]*2 *3 Repeats the current track/cancels the • You can personalize your station using thumb up playback source. repeat playback. ([ ]) or thumb down ([ ]). – You cannot thumb up or down while playing tracks [ ] Creates a new station. *1 For KW-V250BT/KW-V25BT/KW-V350BT Region 1: Purchase in a playlist. optional remote controller, RM-RK258. [ ] Switches the device on screen. (Page 47) depending on the track.
Operation keys on source control screen 4 • The following explanations state the operation keys [ ] Displays the Spotify menu screen. for KW-V250BT/KW-V25BT, unless stated otherwise. • The appearance of the operation keys may differ, [ ]*3 [ ] Selects a track. however the similar operation keys have the same [ ][ ] Starts (I)/pauses (W) playback. operations. • See also “Common operation keys on source control [ ] Saves the current track/artist to .
*1 Not available for tracks in a playlist. *2 Not available for tracks in the Radio. *3 Available only for premium account users.
ENGLISH 31
03_KWV_2019ST_KR_Body01.indd 31 25/6/2018 8:11:45 AM Spotify Other External Components
Selecting a track AV-IN Rear view camera 1 Display the Spotify menu screen. Connecting an external component Install the rear view camera (separately purchased) in On the source control screen, touch as follows: See page 54 for more information. the appropriate position according to the instructions supplied with the rear view camera. Starting playback Connecting a rear view camera 1 Select “AV-IN” as the source. 2 Select the list type, then select a desired See page 54 for more information. item. 2 Turn on the connected component and • To use the rear view camera, a reverse lead (REVERSE) connection is required. (Page 55) • The list types displayed differ depending on the start playing the source. information sent from Spotify. Using the rear view camera Spotify Changing the AV-IN name • For rear camera settings, see on Your Library You can change the AV-IN name displayed on the page 46. Browse source control screen. Radio To display the rear view camera screen • This setting does not affect the source name The rear view screen is displayed by shifting the gear displayed on the Home screen. to the reverse (R) position when screen. Interruption> is set to [ON]. (Page 46) On the source control screen, touch as follows: • A caution message appears on the screen. To • To return to the top layer, touch [ ]. remove the caution message, touch the screen. • To return to the upper layer, touch [ ]. You can also display the picture from the rear view camera manually without shifting the gear to the 2 Select an AV-IN name reverse (R) position.
VIDEO Mode For KW-V250BT/KW-V25BT: On the pop-up short-cut AV-IN Name VIDEO menu, touch as follows:
For KW-V350BT: On the Home screen, touch as follows:
32 ENGLISH
03_KWV_2019ST_KR_Body01.indd 32 22/6/2018 5:20:05 PM Other External Components
Operations while the camera screen is Using an external component via ADS [Satellite Displays the control screen of the displayed adapter—Maestro Radio] satellite radio source provided for the vehicle. To adjust the picture (Only for KW-V350BT Region 1) Touch the area shown below. [Media Displays the control screen of the By connecting this unit to the bus system of the Player] media player source provided for the vehicle using iDataLink (commercially available), this vehicle. unit can access the satellite radio source provided for [TEL] Displays the control screen of the the vehicle and vehicle information can be displayed Bluetooth Hands Free function on this unit. provided for the vehicle. Video menu control is shown. For details, see “Video • Displayable screens, button names, and screen menu control operations” on page 12. names vary depending on the type of the connected [BT Displays the control screen of the • To exit video menu control, touch the same area iDataLink and the model of the vehicle. Streaming] Bluetooth streaming function again. • For details, visit . provided for the vehicle. [Gauges] Displays the information about the To display parking guide line Connecting an ADS adapter instruments such as a speedometer. Set to [ON] (page 46) or See page 54 for more information. [Climate] Displays the information about the air touch the area shown below. conditioner of the vehicle. Using an external component via an ADS [Parking Displays the information about adapter Assist] the Parking Distance Sensor of the vehicle. • For settings to use an ADS adapter, see page 48. • To close the parking guidelines, touch the same area [Vehicle Info] Displays the information about the 1 Select “Maestro” as the source. again. tire pressures of the vehicle. On the Home screen, touch as follows: [Radar Displays the information about the To exit the camera screen Detector] Radar Detector. Press or HOME on the monitor panel or touch the area shown below. 2 Turn on the connected component and start playing the source.
ENGLISH 33
00_KWV_2019ST_KR.indb 33 1/6/2018 8:19:18 AM Bluetooth®
Information Connection Auto pairing When is set to [ON] (page 39), Bluetooth is a short-range wireless radio When you connect a Bluetooth device to the unit for iOS (such as iPhone) devices are automatically paired communication technology for mobile devices such as the first time: when connected via USB. mobile phones, portable PCs and other devices. 1 Register the device by pairing the unit and the Bluetooth devices can be connected without cables device. Pairing a Bluetooth device using SSP and communicate with each other. 2 Connect the device to the unit. (Page 35) (for Bluetooth 2.1) When the Bluetooth device is compatible with Note Registering a new Bluetooth device Bluetooth 2.1, a pairing request is sent from the available device. • While driving, do not perform complicated Pairing allows Bluetooth devices to communicate with operations such as dialing numbers, using the phone each other. 1 Search for the unit (“JVC KW-V”) from your book, etc. When you perform these operations, stop • The pairing method differs depending on the Bluetooth device. your car in a safe place. Bluetooth version of the device. • Some Bluetooth devices may not connect to this unit – For devices with Bluetooth 2.1: 2 Confirm the request both on the device depending on the Bluetooth version of the device. You can pair the device and the unit using SSP and the unit. • This unit may not work for some Bluetooth devices. (Secure Simple Pairing) which only requires On the device: • Connecting conditions may vary depending on your confirmation. environment. – For devices with Bluetooth 2.0: • For some Bluetooth devices, the device is You need to enter a PIN code both on the device disconnected when the unit is turned off. and unit for pairing. • If your mobile phone supports PBAP (Phone Book • Once the connection is established, it is registered in Access Profile), you can display the following items the unit even if you reset the unit. Up to five devices On the unit: on the touch panel when the mobile phone is can be registered in total. connected. • Two devices for Bluetooth phone and one for – Phone book Bluetooth audio can be connected at a time. – Dialed calls, received calls, and missed calls (up to However, when “BT Audio” is selected as the source, 10 entries in total) you can connect up to five Bluetooth audio devices and switch between these five devices. Preparation • To use the Bluetooth function, you need to turn on the Bluetooth function of the device. Connect and install the microphone beforehand. For details, see page 55. To reject the request: Touch [Cancel].
34 ENGLISH
00_KWV_2019ST_KR.indb 34 1/6/2018 8:19:18 AM Bluetooth®
Pairing a Bluetooth device using a PIN code 4 Select the unit (“JVC KW-V”) on your 2 Select the device (1) you want to connect, (for Bluetooth 2.0) Bluetooth device. then select [Connection] (2).
1 Display the screen. • If a PIN code is required, enter “0000” (initial) or Paired Device List On the Home screen, touch as follows: new PIN code you have entered in step 2. Device Name 1 • When pairing is completed, the device is Device Name 2 registered on the screen. Device Name 3 OK Device Name 4 Connection Then, on the screen, touch as follows: Note Device Name 5 Remove [System] : [Enter] • The PIN code is initially set to “0000”. • The maximum number of digits in the PIN code is 15. On the screen, touch as 3 Select the device (1) to connect, then follows: Connecting/disconnecting a registered return to the (2). : [0000] Bluetooth device BT Connection Settings 2 Change the PIN code. 1 Display the screen. Device Name If you wish to skip changing the PIN code, go to Connected ON OFF On the Home screen, touch as follows: step 3. Connect Ready ON OFF
PIN Code Set
0000 123
456 Then, on the screen, touch as follows: 789 [System] : [Enter] Select [ON] (to connect) or [OFF] (to disconnect). 0 Enter Clear On the screen, touch as : Mobile phone follows: : Audio device : [Enter] 4 Connect the selected device. • To delete the last entry, touch [Clear]. • To delete the PIN code, touch and hold [Clear]. Paired Device List 3 Search for the unit (“JVC KW-V”) from your Device Name 1 Device Name 2 Bluetooth device. Device Name 3 OK Device Name 4 Connection Device Name 5 Remove
ENGLISH 35
00_KWV_2019ST_KR.indb 35 1/6/2018 8:19:18 AM Bluetooth®
• The status is shown as follows: • Call information is displayed if acquired. Making a call : Connection is in progress. • Phone operation is not available while the picture : A connection has been established. from the rear view camera is displayed. 1 Display the phone control screen. : A connection can be established. On the Home screen, touch as follows: : Disconnection is in progress. During a call... : No connection is established. For KW-V250BT/KW-V25BT: 1 2 • When a Bluetooth mobile phone is connected, the Device Name 1 Device Name 2 Talking... Name signal strength and battery level are displayed when 1234XXXXXX the information is acquired from the device. NR LEVEL – +0 For KW-V350BT: EC LEVEL – +0 To delete the registered device: Perform step 1, select the device you want to delete in step 2, then DTMF MIC LEVEL – +0 touch [Remove]. • A confirmation message appears. Touch . [Yes] Touching the operation keys performs the following Select a method to make a call. actions: 2 1 2 Bluetooth mobile phone Device Name 1 Device Name 2 [ ] Ends a call. 1234XXXXXX X When a call comes in... [ ]/ Switches between handsfree mode and 12 3
1 2 45 6 Device Name 1 Device Name 2 [ ] phone mode. 78 9 Incoming Call [DTMF] Enters DTMF (Dual Tone Multi * 0/+ # Name Frequency), then sends text using the 1234XXXXXX keypad. 1 From the call history* (missed calls/received NR LEVEL Adjusts the noise reduction level. calls/dialed calls) [–] / [+] (–5 to 5) 2 From the phone book* EC LEVEL Adjusts the echo volume level. 3 From the preset list (Page 37) Touching the operation keys performs the following [–] / [+] (–5 to 5) 4 Use direct number entry actions: MIC LEVEL Adjusts the volume level of the 5 Use voice dialling [ ] Answers a call. [–] / [+] microphone. (–10 to 10) * Applicable only for mobile phone compatible with PBAP (Phone • Press volume + / – buttons on the monitor panel to [ ] Rejects a call. Book Access Profile). adjust the volume of the call or earpiece.
36 ENGLISH
00_KWV_2019ST_KR.indb 36 1/6/2018 8:19:19 AM Bluetooth®
3 Select a contact (1), then make a call (2). When item 4 is selected in step 2: Switching between two connected devices 1 2 3 When item , or is selected in step 2: Enter the phone number (1), then make a You can change the device to use when 2 devices are 1 2 Device Name 1 Device Name 2 call (2). connected. Name 1 1234XXXXXX 1 2 Device Name 1 Device Name 2 On the phone control screen: Name 2 1234XXXXXX X 2345XXXXXX 1 2 Name 3 Device Name 1 Device Name 2 3456XXXXXX 12 3 A-Z 1234XXXXXX X Name 4 45 6 4567XXXXXX 78 9 12 3 Name 5 8901XXXXXX * 0/+ # 45 6 78 9 To use alphabet search in the phone book * 0/+ # 1 Touch [ A-Z]. • To enter “+”, touch and hold [0/+]. 2 Touch the first letter you want to search for on • To delete the last entry, touch [ X ]. The active device is highlighted. the keypad. To search for a number, touch [1,2,3...]. When item 5 is selected in step 2: 3 Presetting phone numbers Select a contact you want to call from the list. Say the name of the person you want to You can preset up to five phone numbers. Phone book search results: call. “Sort order”, “display order” or any other equivalent • Available only when the connected mobile 1 Display the phone control screen. settings of the phone may affect and show phone has a voice recognition system. On the Home screen, touch as follows: different search results (page display) of the phone • If the unit cannot find the target, “Please speak For KW-V250BT/KW-V25BT: book shown on the main unit. into the microphone” appears. Touch [Start], then say the name again. To display other phone numbers in the same • To cancel voice dialling, touch [Cancel]. contact You can store up to 10 phone numbers per For KW-V350BT: contact. 1 Touch [ ]. 2 Select a contact you want to call from the list.
ENGLISH 37
03_KWV_2019ST_KR_Body01.indd 37 22/6/2018 5:22:05 PM Bluetooth®
2 Select call history or phone book calling Bluetooth audio player KW-V350BT method (1), then select a contact (2) to preset. JVC Streaming DJ
1 2 Device Name 1 Device Name 2 When “BT Audio” is selected as the source, you can Name 1 1234XXXXXX connect up to five Bluetooth audio devices at the Name 2 same time. You can easily switch between these five 2345XXXXXX Name 3 devices by playing music from the device. 3456XXXXXX A-Z Name 4 4567XXXXXX Name 5 8901XXXXXX 1 Tag data* (current track title/artist name/album title) 3 Select a preset number to store into. • Pressing [ H ] scrolls the text if not all of the text
1 2 is shown. Device Name 1 Device Name 2 2 Signal strength and battery level 1234XXXXXX (Appear only when the information is acquired 2345XXXXXX from the device.) 3456XXXXXX 3 Playing time*/playback status* No preset 4 Connected device name No preset (Hold) • Touching the device name switches to another KW-V250BT/KW-V25BT connected Bluetooth audio device. To delete the contact in the preset number: Touch * Available only for devices compatible with AVRCP 1.3. [ ] besides the contact on the preset list. BT Audio Playback information and key operation • For playback information, see “Source control screen” on page 7. • For key operations on the touch panel, see “Common operation keys on source control screen” on page 8. Additional keys operations. Touching the operation keys performs the following actions:
[ ] Displays screen.
38 ENGLISH
00_KWV_2019ST_KR.indb 38 1/6/2018 8:19:19 AM Bluetooth®
Selecting an audio file from the menu Bluetooth settings • ON (Initial): Automatically establishes a 1 Display the audio menu. You can change various settings for using Bluetooth connection with the last connected Bluetooth On the source control screen, touch as follows: devices on the screen. device when the unit is turned on. 1 Display the screen. • OFF: Cancels. On the Home screen, touch as follows: Select the speakers used for Bluetooth mobile phones and Bluetooth audio players. 2 Select a category (1), then select a • Front Only: Front speakers only. desired item (2). Then, on the screen, touch as follows: • All (Initial): All speakers. BT Audio [System] : [Enter] Playlists 2 Make the settings. • ON: The unit answers the incoming calls Artist automatically in 5 seconds. Album Bluetooth Setup • OFF (Initial): The unit does not answer the calls Songs Paired Device List Enter automatically. Answer the calls manually. Genre PIN Code 0000 Device Name JVC KW-V Device Address 01:20:03:40:05:60:07 • ON (Initial): Establishes pairing automatically Auto Connect ON OFF with the iOS device (such as iPhone) connected BT Audio Bluetooth HF/Audio Front Only All via USB. (Auto pairing may not work for some Artist 1 devices depending on the iOS version.) Artist 2 • OFF: Cancels. Artist 3 Display the list of registered devices. You can Artist 4 connect a device or delete registered devices. Artist 5 Touch and hold [Enter] to reset all settings you have made for using Bluetooth mobile phones and Change the PIN code of the unit. Bluetooth audio players. Select an item in each layer until you reach and select the desired file. Show the device name of this unit to be shown on the Bluetooth device — JVC KW-V. Show the device address of the unit.
ENGLISH 39
00_KWV_2019ST_KR.indb 39 1/6/2018 8:19:20 AM Settings
Audio settings Store your own sound adjustments The following adjustments are memorized for each Display the screen. source until you adjust the sound again. If the source 1 Select a preset sound mode. On the Home screen, touch as follows: is a disc, the adjustments are stored for each of the 2 Select a band (1) and adjust the level (2), following categories. then adjust the sound (3). • DVD/VCD • CD Equalizer SRC Name Preset Flat Q factor 1.5 Then, on the screen, touch [Audio]. • DivX*1/MPEG1/MPEG2/MP3/WMA/WAV/AAC/FLAC [dB] +9 +7 +5 You cannot adjust the sound when the unit is in +3 Settings 0 -3 -5 standby. -7 Audio Equalizer Enter -9 62.5 100 160 250 400 630 1k 1.6k 2.5k 4k 6.3k 10k 16k [Hz] Display Sound Effect Enter Bass EXT ON OFF EQ INIT Input Fader / Balance Enter Selecting a preset sound mode SW LEVEL 0 ALL SRC System Speaker / X’over Enter Select a preset sound mode on the Key Time Alignment Enter screen. • Flat (Initial)/Hard Rock/Pop/Hip Hop /R&B/Jazz / Adjust the sound as follows: E.g. Audio settings screen for KW-V250BT/ Classical/drvn 3/drvn 2/drvn 1/User KW-V25BT Equalizer SRC Name Adjusts the width of the frequency. Preset Flat Q factor 1.5 • 1.35/1.5 (Initial)/2.0 [dB] +9 +7 You cannot change the screen in the +5 +3 0 -3 following situations: -5 -7 Activates/deactivates bass. -9 • When the AV source is turned off. 62.5 100 160 250 400 630 1k 1.6k 2.5k 4k 6.3k 10k 16k [Hz] • ON/OFF (Initial) • When the Bluetooth phone is used (making or Bass EXT ON OFF EQ INIT receiving a call, during a call, or while voice dialling). SW LEVEL 0 ALL SRC Adjusts the subwoofer level.*2 • To apply the adjusted equalizer to all playback • –50 to +10 (Initial: 0) sources, touch [ALL SRC], then touch [OK] to • To clear the adjustment, touch [EQ INIT]. confirm. 3 Repeat step 2 to adjust the level of other bands.
*1 Only for KW-V350BT Region 4. *2 Not adjustable when is selected for subwoofer on the screen. (Page 42)
40 ENGLISH
00_KWV_2019ST_KR.indb 40 1/6/2018 8:19:20 AM Settings
Moves the center of the sound to the lower or higher Adjust the sound effect. Preparation: point. Select the height. Before making the adjustment for , • OFF (Initial)/Low/Middle/High select the appropriate crossover network mode Adjusts loudness. according to the speaker system (2-way speaker *1 You cannot change the setting when “Tuner” is selected as the • OFF (Initial)/Low/High system or 3-way speaker system). source. *2 This function works only when “DISC”/ “USB”/ “iPod”/ 1 Turn off the AV source. “Android™” is selected as the source. On the Home screen, touch as follows: Selects the bass boost level. • OFF (Initial)/Level 1/Level 2/Level 3/Level 4/ Level 5 Touch [J]/[K]/[H]/[I] or drag the mark to adjust. Reduces the driving noise by raising the bandwidth. 2 Display the screen. • OFF (Initial)/ON Adjusts the front and rear speaker output balance. On the monitor panel, press the following buttons When using a two-speaker system, set the fader to the at the same time: *1 center (0). • For KW-V250BT/KW-V25BT: and volume – Virtually enhances the sound space using the Digital • F15 to R15 (Initial: 0) • For KW-V350BT: and Signal Processor (DSP) system. Select the enhance 3 Select the crossover network mode. level. • OFF (Initial)/Small/Medium/Large Adjusts the left and right speaker output balance. [2way] Select this when 2-way system • L15 to R15 (Initial: 0) speakers are used (front/rear). *2 [3way] Select this when 3-way system To clear the adjustment: Touch [Center]. Restores the sound lost due to audio compression to a speakers are used (tweeter/mid realistic sound. range/woofer). • OFF/ON (Initial) A confirmation message appears. Touch [Yes]. Virtually makes the sound more realistic using the Digital Signal Processor (DSP) system. Select the sound level. • OFF (Initial)/Level 1/Level 2/Level 3
ENGLISH 41
00_KWV_2019ST_KR.indb 41 1/6/2018 8:19:20 AM Settings
Setting the speakers and crossover 3 Adjust the crossover frequency of the frequency selected speaker. Make fine adjustments to the delay time of the speaker • Adjustable items vary depending on the selected output to create a more suitable environment for your 1 Select a car type (1), select the location speaker type/speaker size/crossover settings. car. of the speakers (2)*, then display the Select the listening position (1), select / 3 screen ( ). Adjusts the output volume of the tweeter (left/ [Distance] or [Gain](2) to make an Car Setting right). adjustment , then adjust each speaker 3 setting ( ). Adjusts the crossover frequency for the tweeter. Time Alignment Adjusts the output volume of the selected speaker. Adjusts the crossover frequency for the front or rear speakers (high pass filter). * Speaker location selection is available only when is set to [2way]. Adjusts the crossover frequency for the speaker 1 Select from , , or 2 Select the speaker type (1), select the size (low pass filter). *. of the selected speaker (2), then display 2 Select an item to adjust. the screen (3). Adjusts the crossover slope. [Distance] Adjusts the digital time alignment Speaker Select value. Selects the phase for the speaker. [Gain] Adjusts the output volume of the selected speaker. 3 To determine the adjustment value, see the following “Determining the value for adjustment”.
• If a speaker is not connected, select . To initialize the setting value: Touch [Initialize]. • When setting the front speakers, also select the speaker size for . * is selectable only when is set to [2way].
42 ENGLISH
00_KWV_2019ST_KR.indb 42 1/6/2018 8:19:20 AM Settings
Determining the value for adjustment Adjust and store the auto-adjustment volume level for • Auto (Initial): Dims the screen and button If you specify the distance from the center of the each source. If the source is a disc, the adjustment is illumination when you turn on the headlights. currently set listening position to every speaker, the stored for each of the following categories: – Connection to the car light control switch is delay time will be automatically computed and set. • DVD/VCD required. (Page 55) 1 Determines the center of the currently set • CD • ON: Activates dimmer. listening position as the reference point. • DivX*/MPEG1/MPEG2/MP3/WMA/WAV/AAC/FLAC • OFF: Deactivates dimmer. 2 Measures the distances from the reference point The volume level will automatically increase or to the speakers. decrease when you change the source. 3 Calculates the differences between the distance • –15 to +6 (Initial: 00) of the furthest speaker and other speakers. You can change the display design. While playing a video or picture, you can capture an image and use 4 Sets the DTA value calculated in step 3 for * Only for KW-V350BT Region 4. individual speakers. the captured image as a background. 5 Adjusts gain for individual speakers. • You cannot capture copyrighted content and Display settings images. • When using a JPEG file as the background, make sure E.g. When is selected as the listening Display the screen. position that the resolution is 800 x 480 pixels. On the Home screen, touch as follows: • The color of the captured image may look different from that of the actual scene. +3.5 ft
Then, on the screen, touch [Display]. 1.4 ft Settings Audio Dimmer Auto 2.45 ft Display User Customize Enter Input OSD Clock ON OFF 4.9 ft +2.45 ft System Demonstration ON OFF Key Scroll ON Once OFF
+0 ft E.g. Display settings screen for KW-V250BT/ KW-V25BT
ENGLISH 43
00_KWV_2019ST_KR.indb 43 1/6/2018 8:19:20 AM Settings
For KW-V250BT/KW-V25BT • You can also adjust the color yourself. Touch For KW-V350BT 1 Change the background design [Adjust] to display the color adjustment screen, then 1 Change the background design Display the background design selection screen (1), adjust the color. The adjustment is saved on [User]. Display the background design selection screen (1), select the dimmer setting (2) ([ ]: dimmer on or select the dimmer setting (2) ([ ]: dimmer on or [ ]: dimmer off), then select the background design [ ]: dimmer off), then select the background design (3). (3).
3 Activate Music Synchronize Effect By activating the Music Synchronize Effect, the brightness of illumination bar on the monitor panel changes according to the music level. When one of these is selected, you can 2 Change the illumination color of the buttons on change the background color. Display the music synchronize setting screen (1), then the monitor panel select [ON] (2). 2 Change the illumination color of the Display the illumination color selection screen (1), background design select the dimmer setting (2) ([ ]: dimmer on or Display the background color selection screen (1), [ ]: dimmer off), then select the illumination color then select the background color (2). (3).
To deactivate, touch [OFF].
* Only for KW-V350BT Region 1: Displayed only when an ADS adapter is connected.
44 ENGLISH
04_KWV_2019ST_KR_Body02.indd 44 22/6/2018 5:23:09 PM Settings
• Skip step (2) if you select [Scan] or [User] in step 3 Adjust the image (1), then capture the (3). image (2). • ON (Initial): Activates the display demonstration. • Selecting changes the illumination color [Scan] • OFF: Deactivates the display demonstration. gradually. • Selecting [Music Synchronize] changes the illumination color according to music level. • Selecting [Car Color] changes the illumination color • ON: Scrolls the displayed information repeatedly. by following the setting made for [Illumination] • Once (Initial): Scrolls the displayed information once. using ADS adapter. • OFF: Cancels. • You can also adjust the color yourself if [User] Touching [ H ] scrolls the text regardless of this setting. is selected. Touch [Edit] to display the color E.g. Image adjustment screen for KW-V250BT/ adjustment screen, then adjust the color. The KW-V25BT adjustment is saved on [User]. (Only for KW-V250BT/KW-V25BT) [J][K][H][I] Moves the zooming frame. Selects the playback source to display on the Home [ ] Magnifies the scene. screen. • /// Select an item to replace (1), then select an IW [ ]* Starts/pauses playback. item (2) you want to display in the selected [ ]* Advances scenes frame by frame. position. Repeat the procedure to customize your Home screen. A confirmation message appears. Touch [Yes] to store the newly captured image. (The existing Storing your own scene for the background image is replaced with the new one.) image • To return to the previous screen, touch [No]. • To cancel the capture, touch [Cancel]. 1 While playing a video or picture, display the screen. * Not displayed when playing an external component connected to On the screen, touch as follows: the AV-IN input terminal. : [Enter] • Only selectable sources are shown. Display the background design selection 2 • You cannot locate [Camera] on the Home screen. screen, then touch [ Capture]. • ON: Displays the clock while a video source is • Touching and holding the playback source icon on playing. the Home screen can also display the item selection • OFF (Initial): Cancels. screen.
ENGLISH 45
00_KWV_2019ST_KR.indb 45 1/6/2018 8:19:21 AM Settings
Input settings Adjust the parking guidelines according to the size of Adjust the brightness and blackness of the screen. Display the screen. the car, parking space and so on. Select [DIM ON] (dimmer on) or [DIM OFF] (dimmer On the Home screen, touch as follows: When adjusting the parking guidelines, make sure to off), then change the following settings: use the parking brake to prevent the car from moving. Select the mark (1), then adjust the position of the Adjusts brightness. selected mark (2). Then, on the screen, touch [Input]. • –15 to +15 (Initial: 0 for dimmer on, +15 for dimmer off) Settings Audio Rear Camera Enter Display Parking Assist Enter Adjusts blackness. Input • –10 to +10 (Initial: 0) System Key Initialize Select the color system of the external monitor. E.g. Input settings screen for KW-V250BT/ Make sure that A and B are horizontally parallel, and • NTSC (Initial)/PAL KW-V25BT that C and D are the same length. “Please Power Off” appears when the setting is • Touch and hold [Initialize ] for 2 seconds to set all changed. Turn off the power, then turn on to enable the marks to the initial default position. the change. Configure the rear view camera settings. • ON (Initial): Displays the picture from the rear view (Only for KW-V350BT Region 1) Select the viewing angle in relation to the monitor to camera when you shift the gear to the reverse (R) Configure settings for using the ADS adapter. make the image on the screen easier to see. position. • Under 0° (Initial)/5°/10°/15°/20° – A caution message appears on the screen. To remove the caution message, touch the screen. When an ADS adapter is connected, you can display • OFF: Select this when no camera is connected. information about obstacles around the car. • ON: Always displays information. • Dyn. (Initial): Displays information when the sensor • ON (Initial): Displays the parking guidelines. detects obstacles. • OFF: Hides the parking guidelines. • OFF: Cancels.
46 ENGLISH
00_KWV_2019ST_KR.indb 46 1/6/2018 8:19:21 AM Settings
[USB 1 Wire] Select this when the device is Select where information about obstacles is displayed Set the clock. For details, see “Clock settings” on connected via the USB input on the screen. page 5. terminal (on the monitor panel or • Left/Right (Initial) cable from the rear panel). [Bluetooth] Select this when the device is System settings Specify the connection method of Android/iPod/ connected via Bluetooth. (Go to step 3.) Display the screen. iPhone. On the Home screen, touch as follows: 1 Select the device type (1), then touch If [Android/Other] is selected in step 1: [Change] (2). Smartphone Setup Bluetooth Smartphone Setup
Initial Information Then, on the screen, touch [System]. Device Type iPod / iPhone Connection Type Bluetooth Settings Device Name Device Name Next Audio Language English Device Type Select iPod / iPhone Android / Other Change Display Clock Enter Input Smartphone Setup Enter The screen appears. Go to System Bluetooth Setup Enter step 3. Key Beep ON OFF 2 Select the connection method (1), then 3 When selecting [Bluetooth] as the confirm the selection ([OK] or [Next]) (2). connection method: Select the device (1), E.g. System settings screen for KW-V250BT/ If [iPod/iPhone] is selected in step 1: then press [OK] (2) to connect. KW-V25BT • If the device is already connected, skip step 1. Smartphone Setup
USB 1 Wire Bluetooth Paired Device List Device Name 1 Select the text language used for on-screen Device Name 2 information. For details, see “Initial settings” on Device Name 3 OK page 5. OK Device Name 4 Connection Device Name 5 Remove “Please Power Off” appears when the setting is changed. Turn off the power, then turn on to enable the change.
ENGLISH 47
00_KWV_2019ST_KR.indb 47 1/6/2018 8:19:21 AM Settings
• To reset the touch position, touch [Reset]. • To cancel the current operation, touch [Cancel]. Configure settings for using a Bluetooth device, such (Only for KW-V350BT Region 4)
as connection and other general operations. For This unit has its own Registration Code. Once you details, see “Bluetooth settings” on page 39. have played back a file with the Registration Code recorded, this unit’s Registration Code is overwritten (Only for KW-V350BT Region 4) for copyright protection. Assign functions to the keys of the remote controller (Only for KW-V350BT Region 1) • Touch [Enter] to display the information. on the steering wheel. • To return to the previous screen, touch [OK]. • This function is available only when your car is Get information, and change the settings for using the equipped with the electrical steering remote ADS adapter. controller. • You can only register/change the functions while Initialize all settings you have made. Touch and hold you are parked. [Enter] to initialize the settings. This setting is available only when 2-way speaker • If your steering remote controller is not compatible, • After initializing the settings, adjust the settings on system is selected. (Page 41) learning may not be completed and an error the screen. • ON (Initial): Activates the key-touch tone. message may appear. • OFF: Deactivates the key-touch tone. 1 Touch [Set] for to display the setting screen. Displays the serial number. 2 Press and hold a button on the steering Memorize, recall, or clear the settings you have made. remote controller to register or change. • The memorized settings are kept even when the unit is reset. 3 Select a function to assign to the selected Adjust the touch positions of the buttons on the button. Touch [Yes] to display the setting screen, then select screen. an operation: Steering Remote Control Setting • Recall: Recalls the memorized settings. Touch the center of the marks at the upper left (1), Please select the function to assign to the button. • Memory: Memorizes the current settings. the lower center (2), then the upper right (3) as VOL VOL • Clear: Clears the currently memorized settings and instructed. ATT SRC return to the factory (initial) settings. Touch Panel Adjust Done • Cancel: Cancels. A confirmation message appears. Touch [Yes].
Cancel Reset 48 ENGLISH
04_KWV_2019ST_KR_Body02.indd 48 1/6/2018 11:24:51 AM Settings
4 Repeat steps 2 and 3 to register other Connect a USB device with the update file to the unit. Key settings System Information buttons. Display the screen. 5 Touch [Done] to finish procedure. On the Home screen, touch as follows:
• The unit can register/change all of the buttons’ functions at the same time. To do this, press all buttons in turn and after pressing all of them, touch Then, on the screen, touch [Key]. [Done] on the Settings screen. However, new functions cannot be learned Audio Equalizer Enter after this operation. Updates the system application. Display Sound Effect Enter • When changing the functions already learned, touch Input Fader / Balance Enter the assigned function you want to change in step 3 Updates the system. System Speaker / X’over Enter and then touch to select the new function from the Key Time Alignment Enter function list. • If you turned the power off then on or turn the • Confirm the contents of the settable functions in the ignition switch off then on after selecting , function list. You cannot edit the function list. the unit will reset. E.g. Key settings screen for KW-V250BT/KW-V25BT To initialize the setting: Touch [Initialize] for Updates the DVD system application. . The system update starts. It may take a while. You can customize the pop-up short-cut menu (page • A confirmation message appears. Touch [Yes]. If the update has been completed successfully, 8). – To cancel the initialization, touch [No]. “Update Completed” appears, then reset the unit. • For KW-V250BT/KW-V25BT, you can also customize the (favorite) button. • Do not disconnect the USB device while updating. • If the update has failed, perform the following, then 1 Select the menu to customize. Update the system by connecting a USB device retry the update: containing an update file. Key Customize KW-V250BT/KW-V25BT: Turn the ignition switch off FNC • To obtain the update file, visit Key1 Key2 Key3 Key4 then on . KW-V350BT: Turn the power off then on Settings Background Screen Rear Camera Adjustment
- Favorite Sound Effect Shows the Open Source Licenses. • To customize the (favorite) button, touch the icon under favorite instead.
ENGLISH 49
00_KWV_2019ST_KR.indb 49 1/6/2018 8:19:22 AM Settings Remote Controller
2 Select an item (1) you want to display in Remote controller RM-RK258 is supplied for Preparation the selected menu, then touch [ × ] to set KW-V350BT Region 4. • For KW-V250BT/KW-V25BT/KW-V350BT Region 1: (2). Removing the battery sheet To use the remote controller, purchase optional Pull the battery sheet out from the remote controller Key Customize remote controller, RM-RK258. to activate the battery. FNC Key1 Customize Refer to the instruction manual supplied with the Key1 Settings remote controller. Settings Equalizer • For KW-V350BT Region 4: The unit is equipped Sound Effect with a steering wheel remote control function. - Fader / Balance (Page 48) Car Setting – See page 55 for connection. – Operations may differ depending on the type of 3 Repeat steps 1 and 2 to replace the other steering wheel remote control. Changing the battery of the remote menus. controller Remote sensor*
CR2025 (+side)
• Use a commercially available button battery (CR2025). • Insert the battery with the + and – poles aligned properly. * DO NOT expose the remote sensor to bright – If the effectiveness of the remote controller light (direct sunlight or artificial lighting). decreases, replace the battery.
CALIFORNIA, USA ONLY This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material — special handling may apply. See .
50 ENGLISH
00_KWV_2019ST_KR.indb 50 1/6/2018 8:19:22 AM Remote Controller
WARNINGS Basic operations ANGLE Not used for this unit. • Do not ingest the battery, as it presents a ASPECT Changes the aspect ratio. chemical burn hazard ATT Attenuates/restores the sound. • To check the current aspect ratio The remote controller supplied with this product setting, operate on the touch panel. DISP Displays the current source control contains a coin/button cell battery. (Page 12) screen. If the coin/button cell battery is swallowed, it can J K ENT Confirms selection. cause severe internal burns in just 2 hours and can FM/ /AM/ • Selects the band. lead to death. • Selects a title/item/folder. DIRECT Enters direct search mode. Keep new and used batteries away from children. / • Tuner: CLR Erases the misentry. If the battery compartment does not close securely, – Searches for stations stop using the product and keep it away from automatically. (Press)*1 *1 The search method differs according to the selected seek mode. children. – Searches for stations manually. *2 Only for KW-V250BT/KW-V25BT/KW-V350BT Region 1. If you think batteries might have been swallowed or (Hold)*1 placed inside any part of the body, seek immediate • SiriusXM Satellite Radio*2 : Searching for an item directly medical attention. – Selects a channel. (Press) – Selects a channel rapidly. (Hold) While listening to the Tuner or during disc playback, • Selects a track. (Press) you can search for a station frequency/chapter/title/ CAUTION folder/file/track directly using the number buttons. VOL +/VOL – Adjusts the volume level. • Do not leave the battery near fire or under direct • To search for a track from the VCD menu, perform sunlight. A fire, explosion or excessive heat SRC Selects the source. during PBC playback. generation may result. I/W • Starts/pauses playback. • Do not set the remote controller in hot places such 1 Press DIRECT to enter the search mode. • Changes the seek mode (AUTO1, • Each time you press , the item to search as on the dashboard. DIRECT AUTO2, MANU). for changes. • Danger of explosion if Lithium battery is incorrectly replaced. Replace only with the same or equivalent Answers incoming calls. 2 Press a number button to select a desired type. 0 – 9 Enters a number. item (station frequency/chapter/title/ 1 – 5 Enters a preset station number. folder/file/track). • To erase a misentry, press CLR. 3 Press ENT to confirm.
To exit the search mode: Press DIRECT.
ENGLISH 51
04_KWV_2019ST_KR_Body02.indd 51 1/6/2018 8:48:33 AM Remote Controller Installation and Connection
JVC Remote APP WARNINGS Before installation JVC Remote is an application that connects and • DO NOT connect the ignition wire (red) and the Precautions on installation and connection controls compatible JVC car receivers via Bluetooth® battery wire (yellow) to the car chassis (ground), you like a wireless remote control. may cause a short circuit, that in turn may start a fire. • Mounting and wiring this product requires skills and experience. For best safety, leave the mounting and You can also operate this unit from a Smartphone • DO NOT cut out the fuse from the ignition wire (red) and the battery wire (yellow). The power supply must wiring work to professionals. using JVC Remote APP. • Mount the unit so that the mounting angle is 30° or This application can display the source information be connected to the wires via the fuse. • Always connect the ignition wire (red) and the less. of this unit on the smartphone’s screen, and enables • Make sure to ground the unit to a negative 12 V DC the user to make an audio setting using the graphic battery wire (yellow) to the power source running through the fuse box. power supply. user interface of this application. • Do not install the unit in a location exposed to direct This application also works as a free standalone sunlight or excessive heat or humidity. Also avoid music player application, when your Smartphone is CAUTIONS places with too much dust or the possibility of water not connected to this unit. • Install this unit in the console of your car. splashing. • For details, visit • Do not touch the metal parts of this unit during and • Do not use your own screws. Use only the screws . shortly after the use of the unit. Metal parts such as provided. If you use the wrong screws, you could the heat sink and enclosure become hot. damage the unit. • When parking at a low ceiling area, turn off the unit • After the unit is installed, check whether the brake to store the antenna. As when the unit is installed in lamps, blinkers, wipers, etc. on the car are working the car with the function of auto antenna; the radio properly. antenna extends automatically when you turn on • Do not press hard on the panel surface when the unit with the antenna control wire (ANT. CONT) installing the unit to the car. Otherwise scratches, connected. (Page 55) damage, or failure may result. • If the power is not turned on (“Miswiring DC Offset Error”, “Warning DC Offset Error” is displayed), the speaker wire may have a short circuit or have touched the chassis of the car and the protection function may have been activated. In this case, the speaker wire should be checked. • Keep all cables away from heat dissipating metal parts.
52 ENGLISH
00_KWV_2019ST_KR.indb 52 1/6/2018 8:19:23 AM Installation and Connection
• If your car’s ignition does not have an ACC position, Parts list for installation Installation procedure connect the ignition wires to a power source that Note: This parts list does not include all the package can be turned on and off with the ignition key. If you 1 Remove the key from the ignition and contents. connect the ignition wire to a power source with a disconnect the · battery. constant voltage supply, such as with battery wires, the battery may be drained. ¥ Wiring harness (× 1) 2 Make the proper input and output wire • If the fuse blows, first make sure the wires are not ø Extension wire, 2 m (× 1) connections for each unit. π Flat head screws, M5 × 8 mm (× 6) touching to cause a short circuit, then replace the old 3 Connect the speaker wires of the wiring fuse with one with the same rating. [ Round head screws, M5 x 8 mm (× 6) harness. • Insulate unconnected wires with vinyl tape or other “ Microphone, 3 m (× 1) similar material. To prevent a short circuit, do not 4 Connect the wires of the wiring harness remove the caps and do not let the cable out at the Only for KW-V350BT Region 4 in the following order: ground, battery, ] ends of the unconnected wires or the terminals. Trim plate (× 1) ignition. • Secure the wires with cable clamps and wrap vinyl ‘ Steering remote cable (× 1) tape around the wires that comes into contact with 5 Connect the wiring harness to the unit. metal parts to protect the wires and to prevent short 6 Install the unit in your car. circuit. Make sure that the unit is installed securely in place. • Connect the speaker wires correctly to the terminals If the unit is unstable, it may malfunction (e.g., the to which they correspond. The unit may be damaged sound may skip). or fail to work if you share the · wires or ground · them to any metal part in the car. 7 Reconnect the battery. • When only two speakers are being connected to the 8 Press the reset button on the monitor system, connect both connectors either to the front panel. (Page 3) output terminals or to the rear output terminals (do not mix front and rear). For example, if you connect 9 Configure . (Page 5) the ª connector of the left speaker to a front output terminal, do not connect the · connector to a rear output terminal.
ENGLISH 53
00_KWV_2019ST_KR.indb 53 1/6/2018 8:19:23 AM Installation and Connection
Installing the unit Connecting external components 7 Rear view camera input (R-CAM) 8 Output terminals*4 Installing the unit using the mounting • Left output (White) bracket removed from the car • Right output (Red) REAR: Rear speaker preouts π / [ FRONT: Front speaker preouts SW: Subwoofer preouts For 3-way crossover: REAR: Tweeter preouts FRONT: Mid range speaker preouts π / [ Car bracket SW: Woofer preouts
Note: Select the appropriate screws (supplied) for the *1 Only for KW-V250BT/KW-V25BT/KW-V350BT Region 1. mounting bracket. *2 Only for KW-V350BT Region 1. 1 Expansion port for connecting SiriusXM Connect *3 Only for KW-V350BT Region 4. Installing the trim plate Vehicle Tuner (EXT I/F) (commercially available)*1 *4 When connecting an external amplifier, connect its ground wire to the chassis of the car; otherwise the unit may be damaged. (Only for KW-V350BT Region 4) 2 iDatalink input for connecting an ADS adapter (commercially available)*2 3 Steering wheel remote controller input ] (REMO-IN)*3 • Connect to the car’s steering remote harness using the steering remote cable (‘). Contact your JVC dealer for details. 4 Microphone input (MIC) (Page 55) 5 Audio video input (AV-IN) Connect the following type of 4-pole mini plug: 1 3 1 Left audio 2 Right audio 24 3 Ground 4 Composite video 6 Video output (V-OUT)
54 ENGLISH
04_KWV_2019ST_KR_Body02.indd 54 22/6/2018 5:25:15 PM Installation and Connection
Wiring connection
10 A fuse *1 Only for KW-V250BT/KW-V25BT/KW-V350BT Region 1. “ *2 Only for KW-V350BT Region 1. *3 Only for KW-V350BT Region 4. *4 Only for KW-V350BT Region 1/KW-V350BT Region 4.
Connect the antenna cord to the antenna terminal *1 *2 *3 USB input terminal (1 m)*4 Purple with white stripe REVERSE To the car’s reverse lamp harness when using the optional rear view camera Light green To the car’s parking brake detection switch harness ¥ PRK SW Extension wire ( ø ) (For best safety, be sure to connect the parking sensor.) White ] / White with black stripe [ To front speakers (left) / Mid-range speakers (left) for 3-way crossover Gray ] / Gray with black stripe [ To front speakers (right) / Mid-range speakers (right) for 3-way crossover Green ] / Green with black stripe [ To rear speakers (left) / Tweeters (left) for 3-way crossover Purple ] / Purple with black stripe [ To rear speakers (right) / Tweeters (right) for 3-way crossover Orange with white stripe To the car light control switch
STEERING WHEEL Light blue with yellow stripe REMOTE INPUT REMOTE CONT To the OE remote adapter (not supplied) which is compatible with your car
Blue with white stripe (12 V 350 mA) ANT.CONT To the power control terminal when using the optional power amplifier (Or) P.CONT To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna Red (Ignition wire) Ignition key switch Yellow (Battery wire) Car fuse Black (Ground wire) Car battery To the car chassis
ENGLISH 55
04_KWV_2019ST_KR_Body02.indd 55 22/6/2018 5:25:16 PM References
Maintenance • This unit can play back files that meet the conditions – AAC files copy-protected with FairPlay (except below: those stored on an iPod/iPhone). Cleaning the unit – Bit rate: – Files which have data such as AIFF, ATRAC3, etc. • Do not use any solvent (for example, thinner, MP3: 8 kbps – 320 kbps benzine, etc.), detergent, or insecticide. This may WMA: For disc: 5 kbps – 320 kbps Video files damage the monitor or the unit. For USB : 32 kbps – 192 kbps • This unit can play back the following files with • Gently wipe the panel with a soft, dry cloth. AAC: 16 kbps – 320 kbps following codec and extension code: – Sampling frequency: – DivX* (.divx, .div, .avi) regardless of the letter case— Handling discs MP3: 16 kHz – 48 kHz upper/lower • Do not touch the recording surface of the disc. WMA: 8 kHz – 48 kHz – MPEG1/MPEG2 (.mpg, .mpeg) • Do not stick tape etc. on the disc, or use a disc with WAV: 44.1 kHz • Streams that conform to: tape stuck on it. AAC: 32 kHz – 48 kHz – DivX*: • Do not use any accessories for the disc. FLAC: 8 kHz – 96 kHz Audio: MP3 or Dolby Audio • Clean from the center of the disc and move outward. – Files recorded in VBR (variable bit rate), and have a – MPEG1/MPEG2: • Clean the disc with a dry silicone or soft cloth. Do not discrepancy in elapsed time indication Audio: MPEG1 Audio Layer-2 or Dolby Audio use any solvents. • This unit can show or display the following: Video: MPEG system/program stream • When removing discs from this unit, pull them out – Tag: • Other playable conditions: horizontally. MP3: ID3 Tag (version 1.0/1.1/2.2/2.3/2.4) – Video file size: Less than 2 GB • Remove burrs from the center hole and disc edge WMA Tag – DivX*: Bit rate: 8 Mbps (maximum for average video before inserting a disc. WAV Tag signals) AAC Tag – MPEG1/MPEG2: File format : MP@ML (Main Profile at More information FLAC Tag Main Level)/SP@ML (Simple Profile at Main Level)/ – Jacket picture: MP@LL (Main Profile at Low Level) About playable files Picture size: 32 × 32 to 1 232 × 672 resolution • This unit cannot play back the following files: Data size: less than 500 KB – DivX files encoded in the interlaced scanning Audio files File type: JPEG mode. • This unit can play back the following files with • This unit cannot play back the following files: following codec and extension code: – MP3 files encoded with MP3i and MP3 PRO format. * Only for KW-V350BT Region 4. – For disc: MP3 (.mp3 ), WMA (.wma), WAV (.wav ), – MP3 files encoded with Layer 1/2. AAC (.m4a) – WMA files encoded with lossless, professional, and – For USB mass storage class device: MP3 (.mp3), voice format. WMA (.wma), WAV (.wav), AAC (.aac, .m4a), – WMA files which are not based upon Windows FLAC (.flac ) Media® Audio. – WMA/AAC files copy-protected with DRM.
56 ENGLISH
04_KWV_2019ST_KR_Body02.indd 56 1/6/2018 8:49:26 AM References
Picture files – This unit can recognize a total of 5 000 files and Language codes (for DVD language selection) • This unit can play back the following files with 250 folders (a maximum of 999 files per folder) in a AA Afar GD Scots Gaelic following codec and extension code: recordable/rewritable disc. AB Abkhazian GL Galician – JPEG (.jpg, .jpeg) – Use only “finalized” recordable/rewritable discs. AF Afrikaans GN Guarani • Other playable conditions: – This unit can play back multi-session recordable/ AM Ameharic GU Gujarati – Resolution: 32 × 32 to 8 192 × 7 680 (It may take rewritable discs; however, unclosed sessions will be AR Arabic HA Hausa time to display the file depending on its resolution.) skipped while playing. AS Assamese HI Hindi – Baseline JPEG files AY Aymara HR Croatian • This unit cannot play back the following files: Unplayable disc types and formats – Progressive JPEG files • DVD-Audio/DVD-ROM discs AZ Azerbaijani HU Hungarian – Lossless JPEG files • SVCD (Super Video CD), CD-ROM, CD-I (CD-I Ready), BA Bashkir HY Armenian DTS-CD BE Byelorussian IA Interlingua About disc playback • MPEG4/DivX*/AAC (.aac)/FLAC/MKV/DVD–VR/ BG Bulgarian IE Interlingue DVD+VR/DVD-RAM recorded on DVD-R/RW or BH Bihari IK Inupiak Playable disc types BI Bislama IN Indonesian • CD-DA: Audio CD, CD Text +R/+RW • DVD Video: Region code: 1 or 4 (depending on the • MPEG4/DivX*/AAC (.aac)/FLAC/MKV recorded on BN Bengali, Bangla IS Icelandic country and sales area) CD-R/RW BO Tibetan IW Hebrew • Dual Disc: DVD side • DVD-RW dual layer discs BR Breton JA Japanese • VCD: Video CD (PBC compatible) • +RW double layer discs CA Catalan JI Yiddish • DVD Recordable/Rewritable (DVD-R/-RW, +R/+RW) • Non-DVD side of a “DualDisc” which does not comply CO Corsican JW Javanese – DVD Video: UDF bridge with the “Compact Disc Digital Audio” standard CS Czech KA Georgian • Discs that are not round. – ISO 9660 level 1, level 2, Romeo, Joliet CY Welsh KK Kazakh • Discs with coloring on the recording surface or discs – Other playable formats: DZ Bhutani KL Greenlandic that are dirty. DVD-R recorded in multi-border format (except for EL Greek KM Cambodian • Recordable/Rewritable discs that have not been dual layer discs) EO Esperanto KN Kannada Finalized +R/+RW (Video format only) finalized. • 3 inch discs. Attempting to insert these discs using ET Estonian KO Korean (KOR) • CD Recordable/Rewritable (CD-R/-RW): EU Basque KS Kashmiri – ISO 9660 level 1, level 2, Romeo, Joliet an adapter may cause a malfunction. FA Persian KU Kurdish • Other informations: • Some recordable/rewritable discs or files may not be FI Finnish KY Kirghiz – While playing a DVD Video, DTS sound cannot be played back due to their characteristics or recording FJ Fiji LA Latin reproduced or emitted from this unit. conditions. FO Faroese LN Lingala * Only for KW-V250BT/KW-V25BT/KW-V350BT Region 1. FY Frisian LO Laothian GA Irish LT Lithuanian
ENGLISH 57
00_KWV_2019ST_KR.indb 57 1/6/2018 8:19:23 AM References
LV Latvian, Lettish SM Samoan About USB playback • Electrostatic shock at connecting a USB device may MG Malagasy SN Shona cause abnormal playback of the device. In this case, Important disconnect the USB device then reset this unit and MI Maori SO Somali Make sure all important data has been backed up to MK Macedonian SQ Albanian the USB device. avoid losing the data. • Do not pull out and connect the USB device ML Malayalam SR Serbian We bear no responsibility for any loss of data stored in repeatedly while “Reading” is shown on the screen. MN Mongolian SS Siswati the devices while using this unit. • Operation and power supply may not work as MO Moldavian ST Sesotho intended for some USB devices. MR Marathi SU Sundanese Playable files on a USB device • Do not leave a USB device in the car, or expose to MS Malay (MAY) SW Swahili • This unit can play the following types of files stored direct sunlight or high temperatures to prevent MT Maltese TA Tamil in a USB mass storage class device. deformation or damage to the device. MY Burmese TE Telugu – JPEG/Divx*/MPEG1/MPEG2/MP3/WMA/WAV/AAC NA Nauru TG Tajik (.aac/.m4a)/FLAC Unplayable USB device NE Nepali TH Thai • This unit can recognize: • This unit may not play back files in a USB device NO Norwegian TI Tigrinya – A total of 5 000 files properly when using a USB extension cable. 250 folders for video files and a maximum of 999 OC Occitan TK Turkmen – • USB devices equipped with special functions such as files per folder OM (Afan) Oromo TL Tagalog data security functions cannot be used with the unit. – 250 folders for photo files and a maximum of 999 OR Oriya TN Setswana • Do not use a USB device with 2 or more partitions. files per folder PA Panjabi TO Tonga • Depending on the shape of the USB devices and – 999 folders for audio files and a maximum of 999 PL Polish TR Turkish connection ports, some USB devices may not be files per folder attached properly or the connection might be loose. PS Pashto, Pushto TS Tsonga • The maximum number of characters (when the • This unit may not recognize a memory card inserted QU Quechua TT Tatar characters are 1 byte): into a USB card reader. RM Rhaeto-Romance TW Twi – Folder names: 50 characters RN Kirundi UK Ukrainian – File names: 50 characters About iPod/iPhone RO Rumanian UR Urdu RW Kinyarwanda UZ Uzbek * Only for KW-V350BT Region 4. Important Make sure all important data has been backed up to SA Sanskrit VI Vietnamese avoid losing the data. SD Sindhi VO Volapuk Notes on using a USB device We bear no responsibility for any loss of data stored in SG Sangho WO Wolof • Avoid using the USB device if it might affect driving the devices while using this unit. SH Serbo-Croatian XH Xhosa safety. SI Singhalese YO Yoruba • When connecting with a USB cable, use a USB 2.0 cable. SK Slovak ZU Zulu SL Slovenian
58 ENGLISH
00_KWV_2019ST_KR.indb 58 1/6/2018 8:19:23 AM References Troubleshooting
iPod/iPhone that can be connected What appears to be trouble is not always serious. “Parking off” appears. • Via the USB terminal: Check the following points before calling a service No playback picture is shown when the parking Made for center. brake is not engaged. – iPod nano (7th Generation) • For operations with external components, refer also “Learning Process Failed” appears.*2 – iPod touch (5th and 6th Generation) to the instructions supplied with the adapters used Your steering remote controller is not compatible, – iPhone 4S, 5, 5C, 5S, 6, 6 Plus, 6S, 6S Plus, SE, 7, for connection (as well as the instructions supplied learning may not be completed. Consult your car 7 Plus, 8, 8 Plus, X with the external components). audio dealer for details. • Via Bluetooth: Made for General *1 For KW-V250BT/KW-V25BT/KW-V350BT Region 1: Purchase – iPod touch (5th and 6th Generation) No sound comes out of the speakers. optional remote controller, RM-RK258. – iPhone 4S, 5, 5C, 5S, 6, 6 Plus, 6S, 6S Plus, SE, 7, Adjust the volume to the optimum level. *2 Only for KW-V350BT Region 4. 7 Plus, 8, 8 Plus, X Check the cords and connections. Notes on using an iPod/iPhone No picture is displayed on the screen. Discs • When operating an iPod/iPhone, some operations Turn on the screen. (Page 4) Recordable/Rewritable discs cannot be played back. may not be performed correctly or as intended. In Insert a finalized disc. The unit does not work at all. this case, visit the following JVC web site: Finalize the discs with the component which you Reset the unit. (Page 3) used for recording. • When you turn on this unit, the iPod/iPhone is The remote controller*1 does not work. Tracks on the Recordable/Rewritable discs cannot charged through the unit. Replace the battery. • The text information may not be displayed correctly. be skipped. Insert a finalized disc. • For some iPod/iPhone models, the performance may “No Signal”/“No Video Signal” appears. Finalize the discs with the component which you be abnormal or unstable during operation. In this Start playback on the external component used for recording. case, disconnect the iPod/iPhone device, then check connected to the AV-IN input terminal. its condition. Check the cords and connections. Playback does not start. If the performance is not improved or slow, reset Signal input is too weak. The format of files is not supported by the unit. your iPod/iPhone. “Miswiring DC Offset Error”/“Warning DC Offset No picture appears on the external monitor. Error” appears. Connect the video cord correctly. A speaker cord has shorted or it has come into Select the correct input on the external monitor. contact with the car chassis. Wire or insulate the speaker cord as appropriate, then reset the unit.
ENGLISH 59
00_KWV_2019ST_KR.indb 59 1/6/2018 8:19:23 AM Troubleshooting
DivX*/MPEG1/MPEG2/MP3/WMA/WAV/AAC discs The source does not change to “USB” when you iPod/iPhone cannot be played back. connect a USB device while listening to another No sound comes out of the speakers. Record the tracks using a compatible application source or “USB Device Error” appears when you Disconnect the iPod/iPhone, then connect it again. on the appropriate discs. (Page 57) connect a USB device. Select another source, then reselect “iPod”. Add appropriate extension codes to the file names. The USB port is drawing more power than the design limit. * Only for KW-V350BT Region 4. The iPod/iPhone does not turn on or does not Turn the power off and unplug the USB device. work. Tracks on the recordable/rewritable discs are not Then, turn on the power and reattach the USB Check the connection. played back as you have intended them to play. device. Update the firmware version. Playback order may differ from the one played back If the above does not solve the problem, turn Charge the battery. using other players. the power off and on (or reset the unit) before Reset the iPod/iPhone. replacing with another USB device. “Region Code Error” appears. Sound is distorted. You have inserted a DVD Video disc of an incorrect Deactivate the equalizer either on this unit or the region code. Insert a correct region code disc. Android iPod/iPhone. Sound cannot be heard during playback. A lot of noise is generated. USB Reconnect the Android device. Launch any media player application on the Turn off (uncheck) “VoiceOver” on the iPod/ iPhone. “Reading” does not disappear from the screen. Android device and start playback. For details, visit . Turn the power off and on again. Sound output only from the Android device. No operations are available when playing back a While playing a track, sound is sometimes Use another media player application. track containing artwork. interrupted. Restart the Android device. Operate the unit after the artwork has loaded. The tracks are not properly copied into the USB If this does not solve the problem, the connected device. Copy the tracks again, and try again. “Authorization Error” appears. Android device is unable to route the audio signal Check whether the connected iPod/iPhone is Tracks are not played back as you have intended to unit. compatible with this unit. (Page 59) them to play. If USB connection does not work, connect the Playback order may differ from the one played back Android device via Bluetooth or through the AV-IN Tuner using other players. jack on the rear panel. SSM automatic presetting does not work. “NO DEVICE” or “READING” keeps flashing. Store stations manually. (Page 18) Reconnect the Android device. If USB connection does not work, connect the Static noise while listening to the radio. Android device via Bluetooth or through the AV-IN Connect the antenna firmly. jack on the rear panel.
60 ENGLISH
00_KWV_2019ST_KR.indb 60 1/6/2018 8:19:23 AM Troubleshooting
AV-IN “No Active Station” appears. SiriusXM Satellite Radio* No station is being played. No picture appears on the screen. “SXM No Signal” appears. Turn on the video component if it is not on. “Station limit reached” appears. Make sure the SiriusXM Satellite Radio antenna is Connect the video component correctly. The station list is full and no more stations can be mounted outside the car. Move the car to an area registered. with a clear view of the sky. Pandora*/iHeartRadio*/Spotify “Failed to save your bookmark” appears. “SXM Check Antenna” appears. The application does not work. The unit has failed to save a bookmark. Try the Check the SiriusXM Satellite Radio antenna The application on your iPod touch/iPhone/ operation again. connection, and make sure the antenna is firmly Android is not the latest version. Update the attached to the tuner. application. “Limited Connectivity” appears. Check whether the SiriusXM Satellite Radio antenna The connection with the Pandora application cable is bent or broken. If it is damaged, replace the “Please update Pandora App” appears. cannot be established. whole antenna unit. The Pandora application on your iPod touch/ iPhone/Android is not the latest version. Update “Pandora not available” appears. “SXM Check Tuner” appears. the application. You cannot use the Pandora application from Make sure the SiriusXM Connect Vehicle Tuner is the area where you are currently trying to access connected to the unit. “Please check device.” appears. Pandora. The Pandora application on your iPod touch/ “SXM Chan Unavailable” appears. iPhone/Android has not started up. “Try again later” appears. (Appears on the screen for about 5 seconds, then The Pandora application is not installed on the The Pandora server is under maintenance. returns to the previous channel): connected device. “Station does not exist” appears. The selected channel is no longer available. Select An error has occurred on the Pandora application. The selected station has been deleted by another another channel or continue listening to the previous channel. “Login Error” appears. device or has expired. You have not been signed into Pandora. “Cannot create a Station” appears. “SXM Ch Unsubscribed” appears. (Appears on the screen for about 5 seconds, then “No skips remaining” appears. You cannot create a station during the read- returns to the previous channel) No more songs can be skipped. only mode or when network connection is not established. The selected channel is not part of your current “Failed to save your thumb rating” appears. subscription plan. Call 1-866-635-2349 to subscribe. Thumb-up/down is prohibited. * Only for KW-V250BT/KW-V25BT/KW-V350BT Region 1. “SXM Subscription Updated – Press Return to “No Station” appears. Continue” appears. No station is available. Your subscription has been updated. Press the appropriate button to continue.
ENGLISH 61
00_KWV_2019ST_KR.indb 61 1/6/2018 8:19:23 AM Troubleshooting
“SXM Channel Locked” appears. The unit does not pair with the Bluetooth device. “Initialize Error” appears. The selected channel has been locked by the For devices compatible with Bluetooth 2.1: The unit has failed to initialize the Bluetooth parental controls. Enter the unlock code when you Register the device using a PIN code. (Page 35) module. Try the operation again. are asked. For devices compatible with Bluetooth 2.0: “Dial Error” appears. Enter the same PIN code for both the unit and “SXM Incorrect Lock Code” appears. Dialing has failed. Try the operation again. target device. If the PIN code of the device is not The selected channel is a mature or parental lock indicated in its instructions, try “0000” or “1234.” “Hung Up Error” appears. channel, and locked by the parental lock or user Turn off, then turn on the Bluetooth device. The call has not ended yet. Park your car, and use lock code. Enter the correct lock code. the connected mobile phone to end the call. Echo or noise occurs. * Only for KW-V250BT/KW-V25BT/KW-V350BT Region 1. Adjust the microphone unit position. “Pick Up Error” appears. Adjust the echo volume or noise reduction volume. The unit has failed to receive a call. Bluetooth (Page 36) The Bluetooth connection between the Bluetooth Phone sound quality is poor. The unit does not respond when you try to copy device and the unit is unstable. Reduce the distance between the unit and the the phone book to the unit. Delete the unused registered Bluetooth device Bluetooth mobile phone. You may have tried to copy the same entries (as from the unit. (Page 36) Move the car to a place where you can get a better stored) to the unit. signal reception. “Connection Error” appears. The sound is interrupted or skipped while using a The device is registered but the connection has Bluetooth audio player. failed. Connect the registered device. (Page 35) Reduce the distance between the unit and the Bluetooth audio player. Disconnect the device “Please Wait...” appears. connected for Bluetooth phone. The unit is preparing to use the Bluetooth function. Turn off, then turn on the unit. If the message does not disappear, turn off and (When the sound is not yet restored) connect the turn on the unit, then connect the device again (or player again. reset the unit). The connected audio player cannot be controlled. “No Voice Device” appears. Check whether the connected audio player The connected mobile phone does not have a supports AVRCP (Audio/Video Remote Control voice recognition system. Profile). “No Data” appears. The Bluetooth device does not detect the unit. No phone book data is contained in the connected Search from the Bluetooth device again. Bluetooth phone.
62 ENGLISH
04_KWV_2019ST_KR_Body02.indd 62 6/6/2018 9:35:31 AM Specifications
Monitor section Total Harmonic 0.01% (1 kHz) Bluetooth section Distortion Picture Size (W × H) 6.2 inches (diagonal) wide Technology Bluetooth V3.0 Signal to Noise Ratio 90 dB 137.5 mm × 77.2 mm Frequency 2.402 GHz to 2.480 GHz (5-7/16" × 3-1/16") Dynamic Range 90 dB RF Output Power +4 dBm (MAX), Power Class 2 Display System Transparent TN LCD panel * Only for KW-V350BT Region 4. (E.I.R.P.) Drive System TFT active matrix system Maximum Line of sight approx. 10 m Number of Pixels 1 152 000 DVD player section Communication (32.8 ft) (800H × 480V × RGB) D/A Converter 24 bit Range Effective Pixels 99.99% Audio Decoder Linear PCM/Dolby Audio/ Audio Codec SBC/AAC Pixel Arrangement RGB striped arrangement MP3/WMA/WAV/AAC (.m4a) Multi Profile Support Multi Profile Back Lighting LED Video Decoder DivX*/MPEG1/MPEG2/JPEG Profile HFP (Hands Free Profile) 1.6 Wow & Flutter Below Measurable Limit A2DP (Advanced Audio Distribution Profile) 1.3 Frequency Response 96 kHz Sampling: USB interface section AVRCP (Audio/Video Remote 20 Hz to 22 000 Hz Control Profile) 1.5 USB Standard USB 2.0 Full Speed/High 48 kHz Sampling: GAP (Generic Access Profile) Speed 20 Hz to 22 000 Hz PBAP (PhoneBook Access Compatible Device Mass Storage Class 44.1 kHz Sampling: Profile) 1.2 20 Hz to 20 000 Hz File System FAT 16/32 SDP (Service Discovery Profile) Total Harmonic 0.010% (1 kHz) Maximum Power DC 5 V 1.5 A SPP (Serial Port Profile) 1.2 Supply Current Distortion D/A Converter 24 bit Signal to Noise Ratio 90 dB Audio Decoder MP3/WMA/AAC (.aac/.m4a)/ Dynamic Range 90 dB WAV/FLAC Disc Format DVD-Video/VIDEO-CD/CD-DA Video Decoder DivX*/MPEG1/MPEG2/JPEG DVD-R/DVD-RW/ Frequency Response 96 kHz Sampling: DVD+R/+RW/CD-R/-RW 20 Hz to 20 000 Hz Sampling Frequency 44.1 kHz/48 kHz/96 kHz 48 kHz Sampling: Quantifying Bit 16 bit/20 bit/24 bit 20 Hz to 20 000 Hz Number 44.1 kHz Sampling: 20 Hz to 20 000 Hz * Only for KW-V350BT Region 4.
ENGLISH 63
00_KWV_2019ST_KR.indb 63 1/6/2018 8:19:24 AM Specifications
DSP section FM tuner section External Audio Input 1 Vp-p/75 Ω Level (mini jack) Equalizer 13 Band Frequency Range KW-V250BT/KW-V25BT/ Video Output Level 1 Vp-p/75 Ω KW-V350BT Region 1: Band Frequency (Hz) (BAND1 – 13): (RCA jack) 62.5/100/160/250/400/630/ 87.9 MHz to 107.9 MHz 1k/1.6k/2.5k/4k/6.3k/10k/ (200 kHz) Audio section 16k KW-V350BT Region 4: Maximum Power 50 W × 4 Level: 87.5 MHz to 108.0 MHz (Front & Rear) −09 to +09 (−9 dB to +9 dB) (50 kHz) Q: 1.35/1.5/2.0 Usable Sensitivity 7.2 dBf (0.63 μV/75 Ω) Full Bandwidth 22 W × 4 (at less than 1% Power (Front & Rear) THD) HPF (High Pass Filter) Frequency (Hz): (S/N: 30 dB, Through/30/40/50/60/70/ Dev 22.5 kHz) Preout Level KW-V250BT/KW-V25BT: 80/90/100/120/150/180/ Quieting Sensitivity 15.2 dBf (1.58 μV/75 Ω) 2.5 V/10 kΩ 220/250 (S/N: 46 dB, KW-V350BT Region 1/ Slope (dB/Oct.): Dev 22.5 kHz) KW-V350BT Region 4: 4 V/10 kΩ –6/–12/–18/–24 Frequency Response 30 Hz to 15 kHz Gain (dB): (±3.0 dB) Preout Impedance ≤ 600 Ω –8/–7/–6/–5/–4/–3/–2/–1/0 Signal to Noise Ratio 68 dB (MONO) Speaker Impedance 4 Ω to 8 Ω LPF (Low Pass Filter) Frequency (Hz): Selectivity (±400 kHz) > 80 dB 30/40/50/60/70/80/90/100/ General Stereo Separation 40 dB (1 kHz) 120/150/180/220/250/ Operating Voltage 12 V DC car battery Through AM tuner section Installation Dimensions 178 mm × 100 mm × 162 mm Slope (dB/Oct.): (W × H × D) (7-1/16" × 3-15/16" × 6-7/16") –6/–12/–18/–24 Frequency Range 530 kHz to 1 700 kHz (10 kHz) Weight (Main Unit) KW-V250BT/KW-V25BT/ Gain (dB): Usable Sensitivity 29 dBμ –8/–7/–6/–5/–4/–3/–2/–1/0 KW-V350BT Region 1: Video section 1.7 kg (3.8 lbs) KW-V350BT Region 4: Color System of NTSC/PAL 1.8 kg (4.0 lbs) External Video Input (including trim plate) External Video Input 1 Vp-p/75 Ω Level (RCA jack)/ Design and specifications are subject to change (mini jack) without notice.
64 ENGLISH
00_KWV_2019ST_KR.indb 64 1/6/2018 8:19:24 AM Specifications
Trademarks and licenses • THIS PRODUCT IS LICENSED UNDER THE AVC PATENT and/or other materials provided with the PORTFOLIO LICENSE FOR THE PERSONAL USE OF A distribution. • Dolby, Dolby Audio and the double-D symbol are CONSUMER OR OTHER USES IN WHICH IT DOES NOT – Neither the name of the Xiph.org Foundation trademarks of Dolby Laboratories. RECEIVE REMUNERATION TO nor the names of its contributors may be used to • “DVD Logo” is a trademark of DVD Format/Logo (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC endorse or promote products derived from this Licensing Corporation registered in the US, Japan STANDARD ("AVC VIDEO") AND/OR (ii) DECODE software without specific prior written permission. and other countries. AVC VIDEO THAT WAS ENCODED BY A CONSUMER THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT • The “AAC” logo is a trademark of Dolby Laboratories. ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS HOLDERS AND CONTRIBUTORS “AS IS” AND ANY • Microsoft and Windows Media are either registered OBTAINED FROM A VIDEO PROVIDER LICENSED TO EXPRESS OR IMPLIED WARRANTIES, INCLUDING, trademarks or trademarks of Microsoft Corporation in PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF the United States and/or other countries. SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL MERCHANTABILITY AND FITNESS FOR A PARTICULAR • Use of the Made for Apple badge means that an INFORMATION MAY BE OBTAINED FROM MPEG LA, PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL accessory has been designed to connect specifically L.L.C. SEE HTTP://WWW.MPEGLA.COM THE FOUNDATION OR CONTRIBUTORS BE LIABLE to the Apple product(s) identified in the badge, and • Sirius, XM and all related marks and logos are FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, has been certified by the developer to meet Apple trademarks of Sirius XM Radio Inc. All rights reserved. EXEMPLARY, OR CONSEQUENTIAL DAMAGES performance standards. Apple is not responsible for • Pandora, the Pandora logo, and the Pandora trade (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT the operation of this device or its compliance with dress are trademarks or registered trademarks of OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, safety and regulatory standards. Please note that Pandora Media, Inc., used with permission. DATA, OR PROFITS; OR BUSINESS INTERRUPTION) the use of this accessory with an Apple product may • SPOTIFY and the Spotify logo are among the HOWEVER CAUSED AND ON ANY THEORY OF affect wireless performance. registered trademarks of Spotify AB. LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, • Apple, iPhone, iPod, iPod nano, iPod touch, and • iHeartRadio® and iHeartAuto™ are trademarks owned OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) Lightning are trademarks of Apple Inc., registered in by iHeartMedia, Inc. All uses are authorized under ARISING IN ANY WAY OUT OF THE USE OF THIS the U.S. and other countries. license. SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF • This item incorporates copy protection technology • libFLAC SUCH DAMAGE. that is protected by U.S. patents and other Copyright (C) 2000-2009 Josh Coalson • DIVX intellectual property rights of Rovi Corporation. Copyright (C) 2011-2013 Xiph.Org Foundation – This DivX Certified® device can play DivX® Home Reverse engineering and disassembly are prohibited. Redistribution and use in source and binary forms, Theater video files up to 576p (including .avi, .divx). • Font for this product is designed by Ricoh . with or without modification, are permitted provided Download free software at www.divx.com to • Android is a trademark of Google LLC. that the following conditions are met: create, play and cast digital videos. • The Bluetooth® word mark and logos are registered – Redistributions of source code must retain the – DivX®, DivX Certified® and associated logos are trademarks owned by the Bluetooth SIG, Inc. and any above copyright notice, this list of conditions and trademarks of DivX, LLC and are used under license. use of such marks by JVC KENWOOD Corporation is the following disclaimer. under license. Other trademarks and trade names are – Redistributions in binary form must reproduce the those of their respective owners. above copyright notice, this list of conditions and the following disclaimer in the documentation
ENGLISH 65
00_KWV_2019ST_KR.indb 65 1/6/2018 8:19:24 AM For updated information (the latest Instruction Manual, system updates, new functions, etc.), please visit the following website:
© 2018 JVC KENWOOD Corporation 0618DTSMDTJEIN
00_KWV_2019ST_KR.indb 1 1/6/2018 8:19:24 AM