UNIMASTER® Universal Measuring Instrument

Sec.D_Large dimension:Sec.D_Large dimension 8/7/06 1:30 PM Page 3

Measuring Instruments for Large Dimensions

UNIMASTER® Universal DIN 863 T4 (style B) Measuring Instrument Measuring element The UNIMASTER Universal Measuring Instrument’s durable construction is designed for the direct measurement of especially large internal and external Micrometer and dimensions. It is an accurate, easy-to-handle instrument that can be positioned lever-type dial indicator : .0005 in / 0.01 mm horizontally or vertically while maintaining a constant measuring force. An integrated dial indicator makes it easy to view the culmination point. Micrometer: 1 in / 25 mm The UNIMASTER provides direct measurement of internal dimensions from 10" (250 mm) to 59" (1475 mm) and external dimensions from 9" (225 mm) to 58" (1450 mm).The instrument consists of a measuring head with fixed anvil .05 in / 1 mm and measuring plunger, interchangeable measuring arms, a set of extensions Lever-type dial with integral precision gage rod, and positioning accessories. indicator: ± .015 in / 0.4 mm Mobile ball-bearing anvil under spring pressure 15 to 20 N Reversible probing direction to allow both internal and external measuring

.2 μin / 5 μm

Measuring bolts

With tungsten carbide tipped measuring inserts

Measuring bolts in pairs: • No. 11.10203 for internal measuring in the instrument axis. • No. 11.10205 for internal/ external measuring, meas. depth up to 2.4 in / 60 mm from the lower edge of the instrument. • No. 11.10208, extra-rigid for external measuring, meas. depth up to 3 in / 75 mm from the lower edge of the 11.10205 instrument. 11.10208 Extensions

1.5 in / 38 mm dia. steel tube with snap-ring system Built-in gage rods

Tungsten carbide tipped

One spherical and one flat measuring face

11.10203

11.62001 D-3 Sec.D_Large dimension:Sec.D_Large dimension 8/7/06 1:30 PM Page 4

Measuring Instruments for LargeExternal Dimensions Micrometers

TESA UNIMASTER complete setExternal Micrometers

in in in 11.20000 40245 Int. dim. 10 - 59* Ext. dim. 9 - 58* consisting of: 11.20300 86171 Measuring element Int. dim. 10 - 11 Ext. dim 9 - 10 11.20203 86168 Pair of meas. bolts for int. measurements 11.20205 86169 Pair of meas. bolts for int. and ext. measurements, length 3 Additional data 11.20208 86170 Pair of bolts for ext. measurements, length: 4 11.20501 86172 Setting gage Int. / Ext. dim. 10 / 9 11.20101 86158 Extension 1 .00003 Wooden case 11.20102 86159 Extension 2 .00004 11.20103 86160 Extension 3 .00005 Measuring 11.20104 86161 Extension 4 .00006 element and 11.20105 86162 Extension 5 .00006 setting standard with 11.20106 86163 Extension 6 .00008 identification number 11.20112 86164 Extension 12 .00014 Declaration 11.20118 86165 Extension 18 .00018 of conformity 11.20124 86166 Extension 24 .00026 11.30001 86180 Special screwdriver for extensions 11.10401 86156 Set of suspension accessories (4 brackets and 4 clamps) 11.12401 86157 Wooden storage case for the complete set Optional accessories 11.20140 86167 Extension 40 .0004 11.62001 40293 Pair of bolts for internal/external dimensions and turned grooves. Measuring depth: ≤ .8 Tungsten carbide measuring inserts: ø .16 x .28 11.60001 86184 Support roller available as single item (2 are needed)

TESA UNIMASTER complete set

mm mm μm 11.10000 40213 Int. dim. 250 - 1475* consisting of: Ext. dim. 225 - 1450* 11.10300 40227 Measuring element Int. dim. 250 - 275 Ext. dim. 225 - 250 11.10203 40224 Pair of measuring bolts for int. measurements 11.10205 40225 Pair of measuring bolts for int. and ext. measurements, length: 75 11.10208 40226 Pair of bolts for ext. measurements, length: 100 11.10501 40229 Setting gage Int. dim. 250 Ext. dim. 225 11.10101 40214 Extension 25 0.7 11.10102 40215 Extension 50 1 11.10103 40216 Extension 75 1.2 11.10104 40217 Extension 100 1.5 11.10105 40218 Extension 125 1.5 11.10106 40219 Extension 150 2 11.10112 40220 Extension 300 3.5 11.10118 40221 Extension 450 4.5 11.10124 40222 Extension 600 6.5 11.30001 86180 Special screwdriver for extensions 11.10401 86156 Set of suspension accessories (4 brackets and 4 clamps) 11.12401 86157 Wooden storage case for the complete set Optional accessories 11.10140 40223 Extension 1000 10 11.62001 40293 Pair of bolts for internal/external dimensions and turned grooves. Measuring depth: ≤ 20 Tungsten carbide measuring inserts: ø 4 x 7 11.60001 86184 Support roller available as single item (2 are needed) D-4 * Using a maximum number of 3 extensions Sec.D_Large dimension:Sec.D_Large dimension 8/7/06 1:31 PM Page 5

Measuring Instruments for Large Dimensions

No. 270 Inch Reading Tubular Inside Micrometers The Tubular Inside Micrometer includes hardened and ground spherical measuring ends for accurate gaging of parallel and curved surfaces. Fiber grips are provided on all except 599-270-25-2 and 599-270-30-2 for protection against thermal effects. All sizes, except the 2" to 2-1/2" range, provide a clamp screw for locking the thimble.

in in Single instruments 599-270-25-2 51323 2 - 2.5 .001 .500 599-270-30-2 51227 2.5 - 3 .001 .500 599-270-35-2 51228 3 - 3.5 .001 .500 599-270-40-2 51229 3.5 - 4 .001 .500 599-270-45-2 51230 4 - 4.5 .001 .500 599-270-50-2 51231 4.5 - 5 .001 .500 599-270-60-2 51232 5 - 6 .001 1.000 599-270-70-2 51233 6 - 7 .001 1.000 599-270-80-2 51234 7 - 8 .001 1.000 599-270-90-2 51235 8 - 9 .001 1.000 599-270-100-2 51236 9 - 10 .001 1.000 599-270-110-2 51237 10 - 11 .001 1.000 599-270-120-2 51238 11 - 12 .001 1.000

D-5 Sec.D_Large dimension:Sec.D_Large dimension 8/7/06 1:31 PM Page 6

Measuring Instruments for LargeExternal Dimensions Micrometers

UNITEST® Internal Micrometer The UNITEST Internal Micrometer measures along the instrument axis with 2-point contact on the workpiece. It is a precise, easy-to-handle instrument that can be positioned horizontally or vertically while maintaining a constant measuring force. An integrated dial indicator makes it easy to view the culmination point. The UNITEST provides direct measurement of internal and external dimensions from 8" (200 mm) to 56" (1400 mm). The instrument consists of a measuring head with fixed anvil and measuring plunger, a set of extensions with integral gage rod, and positioning accessories. For the direct measurement of internal and external dimensions from 8" (200 mm) to 56" (1400 mm). Similar to the Unimaster, but lighter in construc tion with extensions only 1" (26 mm) in dia . Con sists of a measur ing head with fixed anvil and mea sur ing plunger, a set of exten sions with integral gage rod, and po si tion ing ac ces so ries. Measuring head: Micrometer system with a range of 1" (25 mm). Every .005" (0.1 mm) indi cat ed digitally (system TESA-MASTER). .0005" (0.01 mm) indi cat ed by the barrel. Dial indi ca tor incor po rat ed, reading to .0005" (0.01 mm). Measuring head cal i brated separately, by means of setting gage supplied with set. Contact faces: Tungsten carbide, spherical, both at plunger end and at fixed anvil. Adapter for ex ter nal measure ments avail able on request. Extensions: Round section steel tube, housing a gage rod with one flat and one spherical end, on centerline of extension. Exten sion diameter is 1" (26 mm). Positioning: Either by resting on the flat portions of the head, or by use of the special sup porting device avail able on request.

D-6 Sec.D_Large dimension:Sec.D_Large dimension 8/7/06 1:32 PM Page 7

Measuring Instruments for Large Dimensions

Inch Model

DIN 863 T4 TESA UNITEST complete set Accuracy (style B) in in μm Measuring element 11.20700 40261 8 - 56 Micrometer and dial gage to consisting of: .0005 in / 0.01 mm 11.20901 86179 Measuring element 8 - 9 Micrometer: .005 in / 0.1 mm 11.51001 86182 Setting gage 8 11.20801 86173 Extension 1 0.7 Micrometer: 11.20802 86174 Extension 2 1 1 in /25 mm 11.20804 86175 Extension 4 1.5 .02 in / 11.20808 86176 Extension 8 2.5 0.5 mm 11.20812 86177 Extension 12 3.5 Dial gage: 11.20820 86178 Extension 20 5.5 ± .1 in / 0.22 mm 11.60901 40291 Special screwdriver 11.62302 86187 Wooden case for complete set 0.7 to 1 N Optional accessories Accuracy 11.51101 86183 Extension 40 10 .0003 in / 8 μm 11.60701 86185 Pair of measuring bolts for blind bores, Measuring bolts tungsten carbide tipped faces 11.62301 86186 Additional components for external measuring Spherical end for measuring Measuring depth: ≤ .40 in the instrument’s axis. 11.50801 86181 Suspension device, complete All inserts are Measuring depth ≤ 4.0 interchangeable.

Tungsten carbide tipped Metric Model

Extensions TESA UNITEST complete set Accuracy 1 in / 26 mm dia. steel tube mm mm μm with snap-ring system Built-in gage rods 11.10700 40230 200 - 1400

consisting of: Tungsten carbide tipped 11.10901 40237 Measuring element 200 - 225 11.41001 40280 Setting gage 200 One spherical and one flat 11.10801 40231 Extension 25 0.7 measuring face 11.10802 40232 Extension 50 1 11.10804 40233 Extension 100 1.5 Additional data 11.10808 40234 Extension 200 2.5 11.10812 40235 Extension 300 3.5 Wooden case 11.10820 40236 Extension 500 5.5 11.60901 40291 Special screwdriver Setting gage with 11.62302 86187 Wooden case for complete set identification number Optional accessories Declaration of conformity 11.41101 40281 Extension 1000 10 11.60701 86185 Pair of measuring bolts for blind bores, tungsten carbide tipped faces 11.62301 86186 Additional components for external measuring Measuring depth: ≤ 10 11.40801 40279 Suspension device, complete Measuring depth: ≤ 100 D-7 Sec.D_Large dimension:Sec.D_Large dimension 8/7/06 1:33 PM Page 8

Measuring Instruments for LargeExternal Dimensions Micrometers

TESA® INOTEST® Comparative Measuring Instrument Measuring element Allows large internal and external dimensions to be measured by comparison. Mobile Consists of a measuring element with interchangeable inserts as well as a set of exten- ball-bearing anvil,10 mm measuring sions with no material measure. The indication is set using a separate reference standard travel that can either be a gauge block, setting ring or horizontal measuring bench. Measuring inserts for inspection in the instrument axis or offset inserts – Vertical or hori- Waterproof dial gauge zontal position of use – Integrated dial gauge to show you the culmination point – No. 14.70104 Constant measuring force – Heat insulating grips for or No. 14.80101 extensions. 0,01 mm or 0.0005 in

10 mm or 0.40 in

Additional technical data, see section E

4 to 7 N Reversible probing direction to allow both internal and external measuring

Measuring bolts

With a tungsten carbide tipped measuring face

Measuring bolts in pairs: • No. 11.31901 for internal measuring in the instrument axis • No. 11.31902 for internal/ external measuring, meas. depth up to 30 mm from the lower edge of the instrument

Extensions

25 mm dia. steel tube. 19 mm dia. telescopic tube that can be clamped

Additional data

Plastic case

Dial gauge with serial number

Inspection report (dial gauge)

Declaration of conformity

D-8 Sec.D_Large dimension:Sec.D_Large dimension 8/7/06 1:34 PM Page 9

Measuring Instruments for Large Dimensions

METRIC INCH

mm in TESA INOTEST complete set

mm in 11.11900 40238 Internal dimensions: 275 - 1025 11.21900 40269 11 - 41 External dimensions: 250 - 1010 10 - 40 consisting of:

mm mm in 11.12301 40243 Measuring element with dial gauge 11.22301 40274 11.31901 40276 Pair of bolts for internal measurements 11.31901 40276 11.31902 40277 Pair of bolts for internal and 11.31902 40277 external measurements, length: 60 11.32001 40278 4 resting bolts ø 7 x 40 11.32001 40278 01.60101 39544 3 insulating grips (order number for 1 item) 01.60101 39544 11.12001 40239 Extension Internal dimensions: 275 - 335 11.22001 40270 11 - 13 External dimensions: 250 - 310 10 - 12 11.12002 40240 Extension Internal dimensions: 325 - 435 11.22002 40271 13 - 17 External dimensions: 300 - 410 12 - 16 11.12003 40241 Extension Internal dimensions: 425 - 635 11.22003 40272 17 - 25 External dimensions: 400 - 610 16 - 24 11.12004 40242 Extension Internal dimensions: 625 - 1035 11.22004 40273 25 - 41 External dimensions: 600 - 1010 24 - 40 11.62303 40297 Plastic storage case for complete set 11.62303 40297 Optional accessories 11.41901 40282 Extensions for increasing the 11.51901 40287 application range by 500 20 11.41902 40283 Extension for increasing the 11.51902 40288 application range by 1000 40 11.62001 40293 Pair of bolts with tungsten carbide measuring 11.62001 40293 inserts for internal/external measuring ø 4 x 7 11.62002 40294 Pair of bolts with tungsten carbide measuring 11.62002 40294 inserts for turned grooves ø 4 x 7 11.61900 40292 Measuring device for small dimensions 11.61900 40292 Internal dimensions: 35 - 280 1.4 - 11 External dimensions: 15 - 255 0.6 - 10

11.62001 11.31901 D-9