Murd620ct, Nrvud620ct, Srvud620ct

Switch-mode Power Rectifier DPAK Surface Mount Package MURD620CT, NRVUD620CT, SRVUD620CT,

SNRVUD620CT www.onsemi.com

These state−of−the−art devices are designed for use in switching ULTRAFAST RECTIFIER power supplies, inverters and as free wheeling diodes. 6.0 AMPERES Features 200 VOLTS • Ultrafast 35 Nanosecond Recovery Time DPAK • Low Forward Voltage Drop CASE 369C • Low Leakage • ESD Rating: 1 ♦ Human Body Model = 3B (> 8 kV) 4 ♦ Machine Model = C (> 400 V) 3 • NRVUD, SRVUD and SNRVUD Prefixes for Automotive and Other MARKING DIAGRAMS Applications Requiring Unique Site and Control Change AYWW AYWW Requirements; AEC−Q101 Qualified and PPAP Capable U U • These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS 620TG S620TG Compliant A = Assembly Location* Mechanical Characteristics: Y = Year WW = Work Week • Case: Epoxy, Molded U620T = Device Code (MURD/NRVUD/ • Weight: 0.4 Gram (Approximately) SNRVUD620CT) • US620T = Device Code (SRVUD620CT) Finish: All External Surfaces Corrosion Resistant and Terminal G = Pb−Free Package Leads are Readily Solderable * The Assembly Location Code (A) is front side • Lead and Mounting Surface Temperature for Soldering Purposes: optional. In cases where the Assembly Location is 260°C Max. for 10 Seconds stamped in the package bottom (molding ejecter pin), the front side assembly code may be blank. ORDERING INFORMATION

Device Package Shipping† MURD620CTG DPAK 75 Units / Rail (Pb−Free) NRVUD620CTG DPAK 75 Units / Rail (Pb−Free) MURD620CTT4G DPAK 2,500 / (Pb−Free) Tape & Reel

NRVUD620CTT4G DPAK 2,500 / (Pb−Free) Tape & Reel SRVUD620CTT4G DPAK 2,500 / (Pb−Free) Tape & Reel SNRVUD620CTT4G DPAK 2,500 / (Pb−Free) Tape & Reel NRVUD620CTG− DPAK 2,500 / VF01 (Pb−Free) Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.

MAXIMUM RATINGS Rating Symbol Value Unit

Peak Repetitive Reverse Voltage VRRM 200 V Working Peak Reverse Voltage VRWM DC Blocking Voltage VR

Average Rectified Forward Current IF(AV) A ° (TC = 140 C) Per Diode 3.0 Per Device 6.0

Peak Repetitive Forward Current IF A ° (Square Wave, Duty = 0.5, TC = 145 C) Per Diode 6.0

Non−Repetitive Peak Surge Current IFSM A (Surge Applied at Rated Load Conditions Halfwave, 60 Hz) 50 ° Operating Junction and Storage Temperature Range TJ, Tstg −65 to +175 C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.

THERMAL CHARACTERISTICS (Per Diode) Characteristic Symbol Value Unit ° Thermal Resistance, Junction−to−Case RqJC 9 C/W ° Thermal Resistance, Junction−to−Ambient (Note 1) RqJA 80 C/W 1. Rating applies when surface mounted on the minimum pad sizes recommended.

ELECTRICAL CHARACTERISTICS (Per Diode) Characteristic Symbol Value Unit

Maximum Instantaneous Forward Voltage Drop (Note 2) vF V ° (iF = 3 Amps, TC = 25 C) 1 ° (iF = 3 Amps, TC = 125 C) 0.96 ° (iF = 6 Amps, TC = 25 C) 1.2 ° (iF = 6 Amps, TC = 125 C) 1.13

Maximum Instantaneous Reverse Current (Note 2) iR mA ° (TJ = 25 C, Rated dc Voltage) 5 ° (TJ = 125 C, Rated dc Voltage) 250

Maximum Reverse Recovery Time trr ns m ° (IF = 1 Amp, di/dt = 50 Amps/ s, VR = 30 V, TJ = 25 C) 35 ° (IF = 0.5 Amp, iR = 1 Amp, IREC = 0.25 A, VR = 30 V, TJ = 25 C) 25 Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.

www.onsemi.com 2 MURD620CT, NRVUD620CT, SRVUD620CT, SNRVUD620CT

TYPICAL CHARACTERISTICS

100 100 ° 70 TJ = 175 C

A) 10 m 50 1 150°C 100°C 30 0.1 20 0.01 25°C , REVERSE CURRENT (

10 R 0.001 I

7.0 0.0001 0 20 40 60 80 100 120 140 160 180 200

5.0 VR, REVERSE VOLTAGE (V) Figure 2. Typical Leakage Current* (Per Leg) 3.0 * The curves shown are typical for the highest voltage device in the ° ° 175 C TJ = 25 C voltage grouping. Typical reverse current for lower voltage selections 2.0 can be estimated from these curves if VR is sufficiently below rated VR. 150°C 100°C , INSTANTANEOUS FORWARD CURRENT (AMPS) CURRENT FORWARD , INSTANTANEOUS 14 F i 1.0 13 5.0 SINE 12 10 WAVE 0.7 11 10 IPK/IAV = 20 dc 0.5 9.0 8.0 SQUARE 0.3 7.0 6.0 WAVE 0.2 5.0 4.0 3.0 TJ = 175°C

, AVERAGE POWER DISSIPATION (WATTS) POWER DISSIPATION AVERAGE , 2.0 0.1 1.0 00.20.4 0.6 0.8 1.0 1.2 1.4

F(AV) 0 P 01.02.0 3.0 4.05.0 6.0 7.0 8.0 9.0 10 vF, INSTANTANEOUS VOLTAGE (V) Figure 1. Typical Forward Voltage (Per Leg) IF(AV), AVERAGE FORWARD CURRENT (A) Figure 3. Average Power Dissipation (Per Leg) 8.0 4.0 RATED VOLTAGE APPLIED RATED VOLTAGE APPLIED 7.0 Rq = 9°C/W 3.5 JC RqJA = 80°C/W 6.0 3.0 T = 175°C J SURFACE MOUNTED ON 5.0 2.5 MIN. PAD SIZE RECOMMENDED dc 4.0 2.0 SINE WAVE dc 3.0 OR 1.5 TJ = 175°C SQUARE WAVE 2.0 1.0 SINE WAVE OR , AVERAGE FORWARD CURRENT FORWARD , AVERAGE (AMPS) 1.0 CURRENT FORWARD , AVERAGE (AMPS) 0.5 SQUARE WAVE F(AV) 0 F(AV) 0 I I 100 110 120 130 140 150 160 170 180 02040 60 80 100 120 140 160 180 200 ° ° TC, CASE TEMPERATURE ( C) TA, AMBIENT TEMPERATURE ( C) Figure 4. Current Derating, Case (Per Leg) Figure 5. Current Derating, Ambient (Per Leg)

www.onsemi.com 3 MURD620CT, NRVUD620CT, SRVUD620CT, SNRVUD620CT

TYPICAL CHARACTERISTICS

100 ° TJ = 25 C

10 C, CAPACITANCE (pF) C, CAPACITANCE

1 0 102030405060708090100

VR, REVERSE VOLTAGE (V) Figure 6. Typical Capacitance (Per Leg)

www.onsemi.com 4 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS

4 DPAK (SINGLE GAUGE) CASE 369C ISSUE F 1 2 DATE 21 JUL 2015 3 SCALE 1:1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME A Y14.5M, 1994. E C 2. CONTROLLING DIMENSION: INCHES. A 3. THERMAL PAD CONTOUR OPTIONAL WITHIN DI- b3 MENSIONS b3, L3 and Z. B c2 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL 4 NOT EXCEED 0.006 INCHES PER SIDE. L3 Z 5. DIMENSIONS D AND E ARE DETERMINED AT THE D OUTERMOST EXTREMES OF THE PLASTIC BODY. DETAIL A H 6. DATUMS A AND B ARE DETERMINED AT DATUM 12 3 PLANE H. 7. OPTIONAL MOLD FEATURE. INCHES MILLIMETERS L4 NOTE 7 c DIM MIN MAX MIN MAX b2 BOTTOM VIEW A 0.086 0.094 2.18 2.38 e SIDE VIEW A1 0.000 0.005 0.00 0.13 b b 0.025 0.035 0.63 0.89 0.005 (0.13) M C b2 0.028 0.045 0.72 1.14 TOP VIEW b3 0.180 0.215 4.57 5.46 c 0.018 0.024 0.46 0.61 c2 0.018 0.024 0.46 0.61 H Z Z D 0.235 0.245 5.97 6.22 E 0.250 0.265 6.35 6.73 e 0.090 BSC 2.29 BSC GAUGE L2 SEATING H 0.370 0.410 9.40 10.41 PLANE C PLANE L 0.055 0.070 1.40 1.78 L1 0.114 REF 2.90 REF L2 0.020 BSC 0.51 BSC L BOTTOM VIEW L3 0.035 0.050 0.89 1.27 A1 L4 −−− 0.040 −−− 1.01 L1 ALTERNATE CONSTRUCTIONS Z 0.155 −−− 3.93 −−− DETAIL A ROTATED 905 CW GENERIC MARKING DIAGRAM* STYLE 1: STYLE 2: STYLE 3: STYLE 4: STYLE 5: PIN 1. BASE PIN 1. GATE PIN 1. ANODE PIN 1. CATHODE PIN 1. GATE 2. COLLECTOR 2. DRAIN 2. CATHODE 2. ANODE 2. ANODE 3. EMITTER 3. SOURCE 3. ANODE 3. GATE 3. CATHODE 4. COLLECTOR 4. DRAIN 4. CATHODE 4. ANODE 4. ANODE XXXXXXG AYWW ALYWW XXX STYLE 6: STYLE 7: STYLE 8: STYLE 9: STYLE 10: XXXXXG PIN 1. MT1 PIN 1. GATE PIN 1. N/C PIN 1. ANODE PIN 1. CATHODE 2. MT2 2. COLLECTOR 2. CATHODE 2. CATHODE 2. ANODE 3. GATE 3. EMITTER 3. ANODE 3. RESISTOR ADJUST 3. CATHODE 4. MT2 4. COLLECTOR 4. CATHODE 4. CATHODE 4. ANODE IC Discrete

SOLDERING FOOTPRINT* XXXXXX = Device Code A = Assembly Location 6.20 3.00 L = Wafer Lot 0.244 0.118 2.58 Y = Year 0.102 WW = Work Week G = Pb−Free Package *This information is generic. Please refer 5.80 1.60 6.17 0.228 to device data sheet for actual part 0.063 0.243 marking.

mm SCALE 3:1 ǒ Ǔ inches

*For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.

Electronic versions are uncontrolled except when accessed directly from the Document Repository. DOCUMENT NUMBER: 98AON10527D Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. DESCRIPTION: DPAK (SINGLE GAUGE) PAGE 1 OF 1

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others.

© Semiconductor Components Industries, LLC, 2018 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: TECHNICAL SUPPORT Email Requests to: [email protected] North American Technical Support: Europe, Middle East and Africa Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 00421 33 790 2910 onsemi Website: www.onsemi.com Phone: 011 421 33 790 2910 For additional information, please contact your local Sales Representative

◊