Surfboard Blank Catalog August 2017 #TheCoreOfSurfing USBlanks.com (310) 225-6774 TABLE OF CONTENTS

Information...... 3

Welcome...... 4

How To Use This Catalog...... 5

SolarMade Blanks...... 6

Foam & Density Selection...... 7

Stringer Selection...... 8

Rocker Selection...... 9

Blank by Catagory...... 10

Polyurethane Blanks...... 11 - 77

Superfused EPS Blanks...... 78 - 91

Block-Cut EPS...... 92 - 100

Parabolic Stringered Blanks...... 101 - 112

Shipping Boxes...... 113

List of Resellers...... 114

PU Quick Reference Guide...... 115 - 116

Sales Policy...... 117 - 119

USBlanks.com 2 INFORMATION

CONTACT

US Blanks are manufactured in Southern California using 100% solar power. We also operate a warehouse in Florida to service the East Coast. US Blanks US Blanks Florida P.O. Box 486 2775 Business Center Blvd Gardena, CA 90248 Melbourne, FL, 32940 Phone: 1(310) 225-6774 Phone: 1(321) 253-3626 Fax: 1(310) 225-6922 Fax: 1(321) 259-2664 [email protected] [email protected]

ACCOUNT SET-UP

US Blanks are available direct (for wholesale manufacuting accounts only) or through a network of Resellers for wholesale & retail sales. To set up a wholesale account contact us at the phone numbers listed above.

RESELLERS

US Blanks are available worldwide through a network of Resellers. A complete list of Resellers along with their contact information is available on page 114 of this catalog. DELIVERY METHOD AND SCHEDULE

US Blanks delivers direct in California from our Los Angeles based factory. Our blanks are available to all other locations via box shipments, pallet shipments, or container loads.

Delivery Type Method Location Blank Quantity Direct US Blanks Trucks San Diego to San Francisco 5-400 Box Common Carrier Worldwide 4-5 per box Pallet Freight Truck Continental US Approx. 50 Container Freight Truck & Ship Worldwide 400-800

US Blanks Truck Schedule Weekly Every 3 to 4 Weeks (subject to change) Monday - San Diego Tuesday - San Luis Obispo Tuesday - Oceanside & San Clemente Wednesday - Santa Cruz & San Francisco Wednesday - Orange County Thursday - LA & Ventura

TERMS

Initial orders are either prepayment or C.O.D. All container orders require 50% deposit and final 50% is due prior to shipping. Credit terms are considered only after a client relationship has been established. Finance charge of 24% APR is applied to past due balances. Please refer to our Sales Policy on page 117 for more information.

GUARANTEE

US Blanks guarantees the quality of our blanks. If you receive a blank that does not meet our quality standards, we will replace the blank. In addition, if that blank has been shaped, we will credit the customer with a shaping fee (per our sched- ule) OR an additional blank (to be determined by US Blanks). In order to be eligible for either credit, the inferior blank must be returned to US Blanks. We will not cover the costs of any work on the blank completed after the first notice of a problem. Please refer to our Sales Policy on page 117 for more information.

USBlanks.com 3 WELCOME

OUR COMPANY

Our mission at US Blanks is to establish a close partnership with customers to produce the best surfboard possible. We are committed to design, technology and to maintaining the highest level of quality while offering a wide range of products, including an extensive variety of blank sizes, weights, stringer, rockers, and glue colors.

The US Blanks team is comprised of industry veterans with unparalleled experience in surfboard blank production.

SUSTAINABILITY & RESPONSIBILITY

Every blank we manufacture comes from our Southern California facility, which runs on 100% solar power. Operating in California requires that we exercise the highest standards in environmental protection and safety precautions for our entire team. Our location and industry-leading practices allow us to maintain longevity among staff and clients and provide unmatched customer service.

US Blanks also maintains a highly-prioritized recycling initiative. Our EPS foam scraps and off-cuts are processed off-site, then recycled for use in a variety of applications from packaging to construction. Our wood scraps, off-cuts, and sawdust are reclaimed off-site for use outside of the surf industry. Our paper, plastic, metal, packaging, and office waste is recycled using best practices at local recycling facilities. MARKETING RESOURCES

Marketing Resources are available for Resellers and manufacturers to help simplify our product line, clarify blank options, and add value to your customer’s experience. Utilize these for your benefit and share them with customers. Our goal is to educate surfers about the importance of quality foam and our wide-ranging customization options. We provide these at no expense. Send requests to [email protected]. For visual examples visit usblanks.com/marketing-resources/

Product Catalog One Sheets Product Overview Poster Tri-Fold Brochures Stickers T-Shirts Hats Stringer Samples Colored Foam Samples Laminates Customer Gift Bags Surf Wax RETAIL T-SHIRT PROGRAM

In addition to our surfboard blanks, we offer a line of t-shirts designed for retail sales. These are available to both Resellers and shapers. Visit USBlanks.com/t-shirts/ or contact us at [email protected] for pricing and current design availability.

USBlanks.com 4 HOW TO USE THIS CATALOG

BLANK MEASUREMENTS

All blank illustrations in this catalog are drawn to actual scale. The wire frame diagrams are drawn at 1:12 scale for blanks shorter than 8’0” and 1:16 for blanks 8’0” and longer. Shape3D sightings from Nose-to-Tail are also included.

Actual measurements vary slightly due to the use of mold release, unpredictable shrinkage during molding, rail fill and rough rails. The nose and tail rockers are measured from the bottom of the blank to the bottom of the nose and the tail.

Volume measurements are calculated using the Shape3D scan method. Shape3D and AKU files for each blank are available upon request. Contact [email protected] BLANK CODE

USBlanks.com 5 SOLARMADE IN THE USA

SOLAIN RTHEM USA ADE USBLANKS.COM

BY THE SUN, FOR THE OCEAN

Every US Blanks surfboard blank is manufactured with solar energy in the USA. The core of surfing, solar made, in the USA.

In 2016 we installed 680 solar panels on the roof of our factory in Los Angeles and transitioned our entire manufacturing facility to run on the energy produced from these panels. This transition makes US Blanks the first and only blank manufacturer in the world to be 100% solar powered.

We believe that responsible business practices foster long-term client and employee relationships and help grow our economy. This has been a core tenet of our brand since day one. Transitioning our factory to 100% solar power is the latest action of this core belief.

We have SOLARMADE stickers and laminates for you. Send your request to info@ usblanks.com.

By the sun, for the ocean.

Among US Blanks Standard Practices 100% Manufactured in the United States (Los Angeles, California) 100% Solar Powered Manufacturing 100% US-based staff US-sourced supply chain (from raw materials, to paper products, to paint) Compliant with all California regulatory agencies EPS foam scrap recycling program Recycling program for all office and factory waste Reclaimed wood scraps, stringer off-cuts, and sawdust

USBlanks.com/solar/

USBlanks.com 6 FOAM & DENSITY SELECTION

Foam selection is arguably the most important element of your blank selection. It will determine your surfboard’s overall performance, weight, strength and feel.

US Blanks offers 6 densities of Polyurethane foam and 2 types of EPS foam, each available in 2 densities.

Polyurethane (PU) US Blanks manufactures a water blown, Toluene Diisocyanate based polyester polyurethane blank. We feel this combina- tion provides the best physical properties required by a surfboard, resulting in the strongest blank possible, and yields the best performance qualities. Our formulation provides the optimum strength, ease of shaping, and maximum flex. We are continuously testing and fine tuning our formulation to ensure that our blanks exceed industry standards for these charac- teristics.

Our PU blanks are available in 6 densities for most sizes. Actual PCF (pounds per cubic foot) of a given weight foam will vary due to mold compaction and skin-to-core ratio. The comparisons listed are based on the difference in pounds of foam used to pour each density and is an average among blank sizes.

The DENSITY of a blank is identified by the color of the paint on the nose. ORANGE RED BLUE GREEN BROWN BLACK Competition Performance Stock Cruiser Classic Tow-In Weight Weight Weight Weight Weight Weight

approximately approximately The basis for approximately approximately approximately 12% - 13% 6% - 7% comparison. 9% - 10% 30% - 32% 205% lighter than Blue lighter than Blue heavier than Blue heavier than Blue heavier than Blue

Expanded Polystyrene (EPS)

US Blanks offers 2 types of surf-formulated EPS foam with DENSITY indicated with text on the nose: BLOCK-CUT EPS & SUPERFUSED EPS

Block-Cut EPS blanks are available in 2 stock Superfused EPS are molded and available in 6 densities; 1.5 pcf & 2.0 pcf, with 1.0 pcf available sizes, in multiple thicknesses, and 2 densities; 1.5 via custom order. These blocks are available up to pcf & 2.0 pcf. The molding process provides tighter 24’ long x 4’ wide x 3’ thick. Custom cut files may fusion and cell structure than traditional EPS be submitted in either Shaped 3D or AKU Shaper blanks. Additional information is listed on page 70 formats. All PU sizes are available as Block-Cut of this catalog. EPS.

USBlanks.com/blank-options/density-selection/

USBlanks.com 7 STRINGER SELECTION

Stringer selection is an important part of a surfboard’s strength, flex pattern, and aesthetic. Our in-house mill allows us to offer nearly any conceivable cut or configuration, including multi-stringers, T-bands, off-set stringers, flares, wedge cuts, and parabolics (see page 101).

We offer 5 solid woods, various plywoods, and 2 alternative materials. For photographic examples of stringer materials and configurations, visit usblanks.com/blank-options/stringer-selection-2/ Contact [email protected] for a sample pack of stringers.

Solid Wood

BALSA: Consistent color and grain. Available in any length and thickness. Not always available. Sometimes scabbed to acheive customer’s desired lengths.

BASSWOOD: Consistent color and grain. Available in any length and thickness. Readily available.

CEDAR: Slight variation in color and grain. Available in any length and thickness. Not always available.

DARK WOOD: Introduced to fill the void when Cedar is unavailable. Variation in color, from a Cedar-tone to dark. Available in any length and thickness. Readily available.

REDWOOD: Slight variation in color and grain. Available in any length and thickness. Available for a limited time.

Plywood

All our plywoods are unidirectional and have very consistent color and grain.

POPLAR 3-PLY: 4mm (Light / Light / Light)

POPLAR 5-PLY: 6mm (Light / Light / Light / Light / Light)

HIGH-PERFORMANCE 3-PLY: 4mm (Light / Dark / Light)

TEAM 3-PLY: 4mm (Dark / Light / Dark)

APPLECORE 3-PLY: 1/8”, color-dyed basswood. Available in a variety of color combinations.

APPLECORE 5-PLY: 5/32” (Light / Dark / Light / Dark / Light)

APPELCORE 5-PLY: 1/4” (Light / Dark / Black / Dark / Light)

APPLECORE 7-PLY: 3/8” (Dark / Light / Dark / Black / Dark / Light / Dark)

Alternative Materials

PVC: Red & Black at 3mm (up to 8’). White at 4mm (up to 8’). Black at 6mm (up to 10’).

COLORED FOAM INSERTS: High density, colored, polyurethane foam is available as a stringer insert. It’s available in any width, including wedges, T-bands, and up to 11’ in length. Stock colors are Blue, Red, Yellow, Orange, Green (Regular or Fresh), Black, Pink, Grey. We formulate our colors to be bright and bold. Occasionally we may have additional colors available.

USBlanks.com/blank-options/stringer-selection/

USBlanks.com 8 ROCKER SELECTION Rocker selection will allow to you find the precise balance of speed and turning radius for your surfboard. US Blanks are designed with a Natural Rocker that fits the widest variety of designs, but we also offer custom Rocker adjustments.

We use the deck line to index all blanks when gluing, and all adjustments are referenced to the Natural Rocker. Adjust- ments can be made from almost any point on a blank, whether deck or bottom, and from one blank size to another. Unless instructed, all rocker adjustments will be made from the center of the blank. If the adjustment is made from a point other than center, the adjustment point will be part of the description. Rockers transferred from one blank size to another will require a match point. Radical rocker adjustments may result in bumps or dips created in the deck line.

The Rocker Formula: Natural Rocker = Inches Rise in the Nose, Inches Rise in the Tail (from the Bottom Plane)

The Nose measurement is always written first. It begins with the number of inches the tip rises from the bottom plane of the blank and is followed by the letter “N”. A comma separates the Nose rocker from the Tail rocker. Likewise, the Tail rocker is written in number of inches the tip rises from the bottom plane of the blank and is followed by the letter “T”.

Rocker Adjustments All Custom Rockers are written as adjustments from the Natural Rocker. Adjustments are made from the center unless otherwise specified.

This indicates that the tip of the Nose is adjusted +1/2” and the Tail is adjusted +1/8” from the Natural Rocker and the adjustments were made from the center. Rocker Adjustments From Location Other Than Center Adjustments made from a location other than centered are indicated by the number, in inches, that follows the “N” or “T” in the rocker formula.

This indicates that the tip of the Nose is adjusted +1/2” from the Natural Rocker, but only within the last 18” of the Nose. And the tail is adjusted +1/8” from the Natural Rocker but only in the last 12” of the Tail. Rocker Adjusted from Multiple Locations Rockers can also be adjusted from multiple locations within the Nose or Tail to add subtle rocker to a given area and then increased rocker to another area, (i.e., a “Flipped Tip” effect). This is indicated by simply adding values to the existing rocker formula.

This indicates that the tip of the Nose is adjusted +1/2” from the Natural Rocker in the last 18” of the Nose and then an additional 1/2” in the last 12” of the Nose. And the tail is adjusted +1/8” from the Natural Rocker but only in the last 12” of the Tail.

USBlanks.com/blank-options/rocker-selection/

USBlanks.com 9 BLANKS BY CATAGORY

SHORTBOARDS 5’9”P 6’0”P 6’0”R 6’2”P 6’3”EA 6’4”EA 6’4”MB pg 11 pg 13 pg 14 pg 16 pg 17 pg 18 pg19 6’5”R 6’6”EA 6’7”P 6’8”A 6’8”AX 6’8”P 6’9”EA pg 21 pg 22 pg 23 pg 24 pg 25 pg 26 pg 28 6’9”R 7’0”A 7’1”A pg 29 pg 31 pg 32

FISH / EGGS 5’10”RP 6’2”A 6’5”A 6’8”RP 6’10”RP 7’3”A 7’4”SP pg 12 pg 15 pg 20 pg 27 pg 30 pg 35 pg 36 7’9”H 7’9”HX 7’10”SP 8’0”H 8’3”H 8’4”SP 8’4”SPX pg 41 pg 42 pg 43 pg 45 pg 49 pg 50 pg 51

FUNBOARDS 7’1”EA 7’5”A 7’6”EA 7’7”A 8’1”EA 8’2”A 8’2”AX pg 33 pg 37 pg 38 pg 39 pg 46 pg 47 pg 48 8’6”EA 9’3”A 9’3”AX pg 53 pg 57 pg 58

LONGBOARDS 8’9”Y 8’9”YX 9’3”Y 9’4”B 9’5”M 9’8”Y 9’9”B pg 54 pg 55 pg 59 pg 60 pg 61 pg 62 pg 65 10’1”C 10’2”B 10’2”BX 10’8”C 10’8”Y 11’3”D pg 67 pg 68 pg 69 pg 73 pg 74 pg 76

GUNS 7’2”EA 7’8”EA 7’11”A 8’5”A 9’2”A 9’9”A 9’9”AX pg 34 pg 40 pg 44 pg 52 pg 56 pg 63 pg 64 10’0”BG 10’6”A 10’6”AX 10’8”BG 11’8”BG pg 66 pg 70 pg 71 pg 72 pg 77

SUPs 9’6”SUP 10’0”SUP 10’4”SUP-A 10’4”SUP-B 10’10”T 11’2”SUP-A pg 93 pg 94 pg 95 pg 96 pg 75 pg 97 11’2”SUP-B 12’1”SUP 12’6”SUP pg 98 pg 99 pg 100

SUPERFUSED EPS 6’5” 6’5”X 6’8” 6’8”X 7’2” 7’2”X 7’8” pg 79 pg 80 pg 81 pg 82 pg 83 pg 84 pg 85 7’8”X 8’8” 8’8”X 9’8” 9’8”X 9’8”XX pg 86 pg 87 pg 88 pg 89 pg 90 pg 91

USBlanks.com/catalogs/

USBlanks.com 10 SHORTBOARD 5’9”PDesigned by TIMMY PATTERSON ROCKER THICKNESS WIDTH Introduced: April 2006 3 13 1 4 /4 " — /16" — 3 /2 " Overall Bottom Length: 5’10 1/4” (178.44 cm) 12.07 cm 2.06 cm 8.89 cm Tip-to-Tip Deck Length: 5’9 5/8” (176.85 cm) 3 3 7 2 /4 " — 1 /16" 6" — 9 /8 " 6.99 cm 3.02 cm 25.10 cm Max Width: 19 3/8” (49.21 cm)

1 5 11 Max Thickness: 2 7/16” (6.19 cm) 1 /2 " — 1 /8 " 12 " — 13 / 16" 3.81 cm 4.13 cm 34.77 cm Displacement: 1.14 ft3 (32.2 L)

3 7 / 4 " — 2 " 18 " — 16 / 16 " 1.91 cm 5.08 cm 41.75 cm

5 5 3 /16" — 2 /16" 24 " — 18 /16" 0.79 cm 5.87 cm 46.20 cm

— 2 7/16" Center — 19 3 / 8 " 6.19 cm 49.21 cm

1 5 1 /4 " — 2 /16" 24 " — 18 / 2 " “This is an ideal Grom blank with medi- 0.64 cm 5.87 cm 46.99 cm um volume. It has an excellent natural rocker which will also work well in the 1 1 1 6’0”P and 6’2”P matched from the nose. / 2 " — 2 /16" 18 " — 17 /16" 1.27 cm 5.24 cm 43.34 cm A perfect hand shape blank that can also be used on the machine.”

13 3 13 TIMMY PATTERSON /16" — 1 / 4 " 12 " — 14 /16" 2.06 cm 4.45 cm 37.62 cm

3 3 9 1 /8 " — 1 / 8 " 6" — 11 / 16 " 3.49 cm 3.49 cm 29.37 cm

15 1 2 " — /16" — 5 / 2 " 5.08 cm 2.38 cm 13.97 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/shortboard/5-9-P/ 11 (310) 225-6774 FISH/EGG 5’10”RPDesigned by RICH PAVEL Introduced: October 2008 Overall Bottom Length: 5’11 1/4” (180.98 cm)

ROCKER THICKNESS WIDTH Tip-to-Tip Deck Length: 5’10 3/4” (179.71 cm) 5 1 4 /8 " — 1 /4 " — 8 " 11.75 cm 3.18 cm 20.32 cm Max Width: 24 7/8” (63.18 cm)

5 11 2 /8 " — 1 /16" 6" 14 13/16" Max Thickness: 2 15/16” (7.46 cm) 6.67 cm 4.29 cm 37.62 cm Displacement: 1.91 ft3 (54.1 L) 3 1 /8 " — 2 3/16" 12 " — 19 5/16" 3.49 cm 5.56 cm 49.05 cm

5 9 /8 " — 2 /16" 18 " — 22 3/16" 1.59 cm 6.51 cm 56.36 cm

1 3 7 /4 " — 2 /4 " 24 " — 23 /8 " 0.64 cm 6.99 cm 60.64 cm

15 — 2 /16" Center — 24 7/8 " 7.46 cm 63.18 cm

“This is a versatile blank with enough 1 3 3 /4 " — 2 /4 " 24 " — 23 /4 " volume to accommodate multiple styles 0.64 cm 6.99 cm 60.33 cm of surfboard, but it was inspired by input from the famed ‘Fish Fry’ events attended 1 1 1 worldwide. It was designed for the mod- /2 " — 2 /2 " 18 " — 22 /2 " 1.27 cm 6.35 cm 57.15 cm ern hand shaper but modified for machine shapes. It easily nets 5’10” deck mea-

7 3 3 surement with high-performance rockers /8 " — 2 /16" 12 " — 20 /8 " 1.75 cm 5.56 cm 51.75 cm and thicker profiles.” RICH PAVEL 5 3 3 1 /16" — 1 /4 " 6" — 17 /4 " 3.33 cm 4.45 cm 45.09 cm

15 5 1 /16" — 1 /16" — 14 " 4.92 cm 3.33 cm 35.56 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fish-eggs/510rp/ 12 (310) 225-6774 SHORTBOARD 6’0”PDesigned by TIMMY PATTERSON January 2007 ROCKER THICKNESS WIDTH Introduced: 5 7 Overall Bottom Length: 6’0 3/4” (184.15 cm) 4 / 8 " — / 8 " — 4 " 11.75 cm 2.22 cm 10.16 cm Tip-to-Tip Deck Length: 6’0 1/4” (182.88 cm)

11 1 1 16 4 6" /16 2 / " — 1 / " — 10 " Max Width: 20” (50.80 cm) 6.83 cm 3.18 cm 25.56 cm

Max Thickness: 2 1/2” (6.35 cm) 1 5 1 1 /2 " — 1 /8 " 12 " — 14 /16" 3.81 cm 4.13 cm 35.72 cm Displacement: 1.23 ft3 (34.9 L)

13 13 /16" — 2 " 18 " — 16 /16" 2.06 cm 5.08 cm 42.70 cm

5 1 9 /16" — 2 /4 " 24 " — 18 / 16" 0.79 cm 5.72 cm 47.15 cm

— 2 1/2 " Center — 20" 6.35 cm 50.80 cm

“This is a close-to-medium tolerance blank excellent for Junior sizes. Adjusted 3 5 15 thickness flow in the nose and tail makes /16" — 2 /16" 24 " — 18 / 16" 0.48 cm 5.87 cm 48.10 cm it a perfect quick shape blank. The design was based on the 6’2”P.” TIMMY PATTERSON 7 1 11 /16" — 2 /8 " 18 " — 17 / 16" 1.11 cm 5.40 cm 44.93 cm

3 7 9 /4 " — 1 /8 " 12 " — 15 / 16" 1.91 cm 4.76 cm 39.53 cm

3 7 3 1 /16" — 1 /16" 6" — 12 / 8 " 3.02 cm 3.65 cm 31.43 cm

11 3 1 /16" — 1 " — 6 /4 " 4.29 cm 2.54 cm 17.15 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/shortboard/60p/ 13 (310) 225-6774 SHORTBOARD 6’0”RDesigned by RUSTY PREISENDORFER Introduced: March 2011 Overall Bottom Length: 6’0 1/2” (184.15 cm) ROCKER THICKNESS WIDTH 5 4 / 16" 1 Tip-to-Tip Deck Length: 5’11 3/4” (182.25 cm) — 1 /4 " — 5 " 10.95 cm 3.18 cm 12.70 cm Max Width: 21 3/16” (53.82 cm)

7 3 2 /16 " — 1 /4 " 6" — 12 1/8 " 6.19 cm 4.45 cm 30.80 cm Max Thickness: 3 3/16” (7.78 cm)

3 3 Displacement: 1.667 ft (47.2 L) 1 /8 " — 2 3/16" 12 " — 16" 3.49 cm 5.56 cm 40.64 cm

3 9 /4 " — 2 /16" 18 " — 18 1/2 " 1.91 cm 6.51 cm 46.99 cm

1 13 /4 " — 2 /16 " 24 " — 20 1 / 16" 0.64 cm 7.14 cm 50.96 cm

3 — 3 1/16" Center — 21 /16" 7.78 cm 53.82 cm

“Designed to be a versatile blank for shorter, wider, relaxed rockered boards. 3 13 1 /16" — 2 /16" 24 " — 20 /4 " Somewhere between a Fish and perfor- 7.14 cm 51.44 cm 0.48 cm mance Shortboard, with added volume under the chest. Semi-flat deck and thick- 7 11 15 /16" — 2 /16" 18 " — 18 / 16 " er on the ends. It should provide a wide 1.11 cm 6.83 cm 48.10 cm range of options.” RUSTY PREISENDORFER 13 1 /16" — 2 /4 " 12 " — 17" 2.06 cm 5.72 cm 43.18 cm

3 11 7 1 /8 " — 1 /16" 6" — 13 / 8 " 3.49 cm 4.29 cm 35.24 cm

5 2 " — 1 /16" — 8 1/2 " 5.08 cm 3.33 cm 21.59 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/shortboard/60r/ 14 (310) 225-6774 FISH/EGG 6’2”ADesigned by PAT RAWSON ROCKER THICKNESS WIDTH Introduced: July 2006 4 3/4" 8 " 1 8 Overall Bottom Length: 6’2 3/4” (189.87 cm) 12.07 cm 1 / " 20.32 cm 2.86 cm Tip-to-Tip Deck Length: 6’2” (187.96 cm) 7 5 3 2 / 8 " 1 /8 " 6" 15 /16" 7.30 cm 4.13 cm 38.58 cm Max Width: 23 1/2” (59.69 cm)

11 1 Max Thickness: 2 15/16” (7.46 cm) 1 /16" 2 /8 " 12 " 19" 4.29 cm 5.40 cm 48.26 cm Displacement: 1.95 ft3 (55.1 L) 15 1 1 /16" 2 /2 " 18 " 21 /4 " 2.38 cm 6.35 cm 53.97 cm

7 3 5 /16" 2 /4 " 24 " 22 /8 " 1.11 cm 6.99 cm 57.47 cm

15 1 2 /16" Center 23 /2 " 7.46 cm 59.69 cm

“I designed this one to be able to easily 1 9 net 6’1” by the bottom measurement for /4 " 2 /16" 24 " 22 " 0.64 cm 6.51 cm 55.88 cm a shorter length contemporary, retro Fish, or Single-Fin design.”

9 5 1 16 2 /16" 20 /2 " PAT RAWSON / " 18 " 1.43 cm 5.87 cm 52.07 cm

9 15 2 18 /16 /16" " 12 " " 2.38 cm 33.81 cm 47. 15 cm

11 1 5 1 /16 16 /8 1 /16" " 6" " 3.33 cm 4.29 cm 40.96 cm

13 1 1 1 /16" 1 /4 " 12 /2 " 4.60 cm 3.18 cm 31.75 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fish-eggs/62a/ 15 (310) 225-6774 SHORTBOARD 6’2”PDesigned by TIMMY PATTERSON ROCKER THICKNESS WIDTH Introduced: July 2006 3 1 4 7/16" /4 " 4 /2" Overall Bottom Length: 6’2 1/2” (189.23 cm) 11.27 cm 1.91 cm 11.43 cm Tip-to-Tip Deck Length: 6’1 7/8” (187.64 cm) 1 2 1/ 2 1 /4 " 10" " 6" 1/2” (52.07 cm) 6.35 cm 3.18 cm 25.40 cm Max Width: 20

Max Thickness: 2 1/2” (6.35 cm) 1 5 1 /2 1 /8 " 14" " 12 3.81 cm 4.13 cm " 35.56 cm Displacement: 1.31 ft3 (37.2 L)

13 3 /16 2 " 16 /4 " " 18 2.06 cm 5.08 cm " 42.55 cm

3 1 5 /8 2 /4 " 18 /8 " " 24 0.95 cm 5.72 cm " 47.31 cm

1 1 2 /2 " Center 20 /2 " 6.35 cm 52.07 cm

“This blank is designed for team boards and production shaping. It is a shorter version of the 6’7”P, which has a little 5 3 7 more thickness in the nose and tail than /16" 2 /8 " 24 " 19 /16" 0.79 cm 6.03 cm 49.37 cm the original. A medium tolerance blank.” TIMMY PATTERSON 5 3 7 /8 " 2 /16" 18 " 17 /8 " 1.59 cm 5.57 cm 45.40 cm

1 7 7 1 /16" 1 /8" 12 " 15 /16" 2.70 cm 4.76 cm 39.21 cm

5 3 7 1 /8 " 1 /8 " 6" 11 /8 " 4.13 cm 3.49 cm 30.16 cm

1 1 2 /4 " 1" 6 /8 " 5.72 cm 2.54 cm 15.58 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/shortboard/62p/ 16 (310) 225-6774 SHORTBOARD 6’3”EADesigned by ROCKER THICKNESS WIDTH ERIC ARAKAWA Introduced: July 2006 1 3 1 5 /2 " /4 " 4 /8" 13.97 cm 1.91 cm 10.48 cm Overall Bottom Length: 6’4 1/8” (193.36 cm)

5 6’3 1/4” (191.14 cm) 3 /16 1 1 Tip-to-Tip Deck Length: " 1 /4 " 6" 10 /8 " 10.00 cm 3.18 cm 25.72 cm Max Width: 20 5/8” (52.39 cm)

13 1 /16" 11 3 1 /16" 12 " 14 /16" Max Thickness: 2 9/16” (6.51 cm) 4.60 cm 4.29 cm 36.04 cm

Displacement: 1.38 ft3 (39.2 L) 15 1 /16" 2" 18 " 17 /8 " 2.38 cm 5.08 cm 43.50 cm

7 /16 5 " 2 /16" 24 " 19" 1.11 cm 5.87 cm 48.26 cm

9 5 2 /16" Center 20 /8" 6.51 cm 52.39 cm

“Designed to be a versatile blank for

5 5 1 boards 6’2” and under. I added a little /16" 2 /16" 24 " 19 /4 " 0.79 cm 5.87 cm 48.90 cm nose width to accommodate most modern full nose shortboards. This is essentially a thinner version of the 6’4” EA.” 9 /16" 3 11 2 /16" 18 " 17 /16" ERIC ARAKAWA 1.43 cm 5.56 cm 44.93 cm

15 7 7 /16" 1 /8 " 12 " 15 /16" 2.38 cm 4.76 cm 39.21 cm

7 5 7 1 /16" 1 /8 " 6" 12 /16" 3.65 cm 4.13 cm 31.59 cm

1 1 2 /16" 1 /4" 8 " 5.24 cm 3.18 cm 20.32 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/shortboard/63ea/ 17 (310) 225-6774 SHORTBOARD 6’4”EADesigned by ERIC ARAKAWA THICKNESS WIDTH Introduced: July 2006

1 15 1 5 /2 " / 16" — 4 /8 " Overall Bottom Length: 6’4 1/4” (193.66 cm) 13.97 cm 2.38 cm 10.48 cm Tip-to-Tip Deck Length: 6’3 1/2” (191.14 cm) 5 5 1 3 /16" 1 /16" 6" —10 /8 " 8.41 cm 3.33 cm 25.72 cm Max Width: 20 5/8” (52.39 cm)

13 3 3 1 /16" 1 /4 " 12 " — 14 /16 " Max Thickness: 2 3/4” (6.99 cm) 4.60 cm 4.45 cm 36.04 cm Displacement: 1.49 ft3 (42.3 L) 15 1 1 /16" 2 /8 " 18 " — 17 /8" 2.38 cm 5.40 cm 43.50 cm

7 7 /16" 2 /16" 24 " — 19" 1.11 cm 6.19 cm 48.26 cm

3 5 2 /4 " Center — 20 /8 " 6.99 cm 52.39 cm

“Designed to be a versatile blank for boards 6’2” and under. I added a little 5 1 1 /16" 2 /2 " 24 " — 19 /4" nose width to accommodate most modern 6.35 cm 48.90 cm 0.79 cm full nose shortboards, and it also accom- modates machine shapes.” 9 5 11 /16" 2 /16" 18 " — 17 /16 " ERIC ARAKAWA 1.43 cm 5.87 cm 44.93 cm

15 7 /16" 2 " 12 " — 15 / 16" 2.38 cm 5.08 cm 39.21 cm

7 11 7 1 / 16" 1 /16" 6" — 12 /16" 3.65 cm 4.29 cm 31.59 cm

1 5 2 /16" 1 /16" — 8 " 5.24 cm 3.33 cm 20.32 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/shortboard/64ea/ 18 (310) 225-6774 SHORTBOARD 6’4”MBDesigned by MATT BIOLOS January 2016 ROCKER THICKNESS WIDTH Introduced: 7 1 1 5 Overall Bottom Length: 6’4 7/8” (195.26 cm) 4 /8 " 1 /4 " /4 " 12.38 cm 3.18 cm 13.34 cm Tip-to-Tip Deck Length: 6’4 1/8” (193.36 cm) 13 5 2 /16" 1 13/16" 6" 10 /8 " 7.14 cm 4.60 cm 26.99 cm Max Width: 21 7/16” (54.45 cm)

9 5 1 /16" 2 /16" 12 " 14 3/4 " Max Thickness: 3 3/16” (8.10 cm) 3.97 cm 5.87 cm 37.47 cm Displacement: 1.836 ft3 (52.0 L) 13 11 18 11 /16" 2 /16" " 17 /16" 2.06 cm 6.83 cm 44.93 cm

3 15 24 9 /8 " 2 /16" " 19 /16" 0.95 cm 7.46 cm 49.69 cm

7 3 3/16" Center 21 /16" 8.10 cm 54.45 cm

“This blank fills the volume gap between 1 15 5 /4 " 2 /16" 24 " 20 /16" the 6’4” EA & 6’5” R. Ideal for grovel- 0.64 cm 7.46 cm 51.59 cm ers and thicker shortboards, the blank features more subtle nose and tail rocker 1 11 15 /2 " 2 /16" 18 " 18 /16" and enough thickness to fit a wide variety 1.27 cm 6.83 cm 48.10 cm of modern shortboard needs.” MATT BIOLOS 7 5 3 /8 " 2 /16" 12 " 16 /4" 2.22 cm 5.87 cm 42.55 cm

3 15 9 1 /8 " 1 /16" 6" 13 /16" 3.49 cm 4.92 cm 34.45 cm

1 2 " 1 /2 " 9 " 3.81 cm 5.08 cm 22.86 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/shortboard/64mb/ 19 (310) 225-6774 FISH/EGG 6’5”ADesigned by PAT RAWSON ROCKER THICKNESS WIDTH Introduced: July 2006 1 1 1 5 / 16" — 1 /4 " — 7 /2 " Overall Bottom Length: 6’5 1/2” (196.85 cm) 12.86 cm 3.16 cm 19.05 cm Tip-to-Tip Deck Length: 6’4 7/8” (195.26 cm) 3 11 3 3 / 16" — 1 /16" 6" — 14 /4 " 8.10 cm 4.29 cm 37.47 cm Max Width: 23 1/2” (59.69 cm)

7 3 7 1 /8 " — 2 /16" 12 " —18 /8 " Max Thickness: 3 1/8” (7.94 cm) 4.76 cm 5.56 cm 47.94 cm Displacement: 2.15 ft3 (60.9 L) 1 5 1/8 1 /16" — 2 /8 " 18 " — 21 " 53.66 cm 2.70 cm 6.67 cm

9 7 1 /16" — 2 /8 " 24 " — 22 /2 " 1.43 cm 7.30 cm 57.15 cm

1 — 3 1/8 " Center — 23 /2 " 7.94 cm 59.69 cm

“This is the longer version of my 6’2” A. It easily nets 6’4” by the bottom measure- 5 11 3 ment for a shorter mid length contempo- /16" — 2 /16" 24 " — 21 /4 " 0.79 cm 6.83 cm 55.25 cm rary, a retro Fish, or a Single-Fin design.” PAT RAWSON 9 1 1 /16" — 2 /2 " 18 " — 20 /4 " 1.43 cm 6.35 cm 51.44 cm

7 1 3 /8 " — 2 /8 " 12 " — 18 /8 " 2.22 cm 5.40 cm 46.67 cm

5 1 /16" — 1 3/4 " 6" — 16" 3.33 cm 4.45 cm 40.64 cm

3 1 1 1 / 4 " — 1 /2 " — 12 /2 " 4.45 cm 3.81 cm 31.75 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fish-eggs/65a/ 20 (310) 225-6774 SHORTBOARD 6’5”RDesigned by RUSTY PREISENDORFER Introduced: April 2011 ROCKER THICKNESS WIDTH Overall Bottom Length: 6’5 1/2” (196.85 cm) 11 3 1 4 /16" 1 /8 " 6 /4 " 11.91 cm 3.49 cm 15.88 cm Tip-to-Tip Deck Length: 6’4 3/4” (194.95 cm)

9 15 1 2 /16" 1 /16" 6" 13 /8 " Max Width: 21 3/4” (55.25 cm) 6.51 cm 4.92 cm 33.34 cm Max Thickness: 3 1/4” (8.26 cm) 9 3 7 1 / 16" 2 /8 " 12 16 / 8 " 3.97 cm 6.03 cm 42.86 cm Displacement: 1.98 ft3 (56.0 L)

7 / 8 " 3 1 2.22 cm 2 / 4 " 18 " 19 / 4 " 6.99 cm 48.90 cm

3 3 /8 " 3" 24 " 20 /4 " 0.95 cm 7.62 cm 52.71 cm

1 3 / 4 " Center 21 3/4 " 8.62 cm 55.25 cm

“This is the larger version of the 6’0”R. Designed to be a versatile blank for

1 1 5 shorter, wider, relaxed rockered boards; /4 " 3 /16" 24 " 20 /8 " 0.64 cm 7.78 cm 52.39 cm somewhere between a Fish and a perfo- mance Shortboard, with added volume

9 13 1 under the chest. The semi-flat deck and /16 " 2 /16" 18 " 19 /8 " 1.43 cm 7.14 cm 48.58 cm thicker nose and tail provide a wide range of design options.”

11 7 RUSTY PREISENDORFER /16" 2 /16 " 12 " 17" 1.75 cm 6.19 cm 43.18 cm

7 1 / 1 6 " 2 " 6" 14" 3.65 cm 5.08 cm 35.56 cm

1 3 1 2 /4 " 1 /8 " 9 /4 " 5.72 cm 3.49 cm 23.50 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/shortboard/65r/ 21 (310) 225-6774 SHORTBOARD 6’6”EADesigned by

ROCKER THICKNESS WIDTH ERIC ARAKAWA 5 1 Introduced: July 2006 5 /16" 1" 4 /4 " 13.49 cm 2.54 cm 10.80 cm Overall Bottom Length: 6’6 1/8” (198.44 cm)

5 3 9 3 /16" 1 /8 " 6" 10 /16" Tip-to-Tip Deck Length: 6’5 3/8” (196.22 cm) 8.41 cm 3.49 cm 26.83 cm Max Width: 21 1/4” (53.98 cm) 7 7 5 1 / 8 " 1 /8 " 12 14 / 8 " 4.76 cm 4.76 cm 37.15 cm Max Thickness: 2 15/16” (7.46 cm)

3 1 1 5 Displacement: 1.65 ft (46.7 L) 1 / 16" 2 / 4 " 18 " 17 / 8 " 2.70 cm 5.72 cm 44.77 cm

1 9 9 /2 " 2 /16" 24 " 19 /16" 1.27 cm 6.51 cm 49.69 cm

15 2 / 16 " Center 21 1/4 " 7.46 cm 53.98 cm

“This blank is intended for high-perfor- mance shortboard designs between 6’2” and 6’5” in length. It was designed in 5 5 3 /16" 2 /8 " 24 " 19 /4 " concert with the 6’4”EA and 6’9”EA.” 0.79 cm 6.67 cm 50.17 cm ERIC ARAKAWA

5 3 1 /8 " 2 /8 " 18 " 18 /8 " 1.59 cm 6.03 cm 46.04 cm

1 1 3 1 / 1 6 " 2 /16" 12 " 15 /4 " 2.70 cm 5.23 cm 40.01 cm

9 5 1 1 / 1 6 " 1 /8 " 6" 12 /2 " 3.97 cm 4.13 cm 31.75 cm

3 5 1 2 /16" 1 /16" 7 /2 " 5.56 cm 3.33 cm 19.05 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/shortboard/66ea/ 22 (310) 225-6774 SHORTBOARD 6’7”PDesigned by ROCKER THICKNESS WIDTH TIMMY PATTERSON 1 3 3 Introduced: July 2006 5 /4 " /4 " 4 /8 " 13.34 cm 1.91 cm 11.11 cm Overall Bottom Length: 6’7 1/8” (200.66 cm)

1 1 1 3 /4 " 1 /8 " 6" 10 /4" Tip-to-Tip Deck Length: 6’6 1/2” (198.76 cm) 8.26 cm 2.86 cm 26.04 cm Max Width: 21 1/2” (54.61 cm) 15 9 1 1 /16" 1 /16" 12 " 14 /2 " 4.92 cm 3.97 cm 36.83 cm Max Thickness: 2 3/4” (6.99 cm)

3 1 3 Displacement: 1.54 ft (43.6 L) 1 /8 " 2" 18 " 17 /8" 2.86 cm 5.08 cm 44.13 cm

9 5 7 /16" 2 /16" 24 " 19 /16" 1.43 cm 5.87 cm 49.37 cm

3 2 /4 " Center 21 1/2 " 6.99 cm 54.61 cm

“This blank was designed for team boards and production shaping. It has a little more thickness in the nose and 3 7 15 /8 " 2 /16" 24 " 19 /16" tail than the original 6’6”P. It’s a medium 0.95 cm 6.19 cm 50.64 cm tolerance blank.” TIMMY PATTERSON 3 3 3 /4 " 2 /16" 18 " 18 /8 " 1.91 cm 5.56 cm 46.67 cm

3 13 7 1 /16" 1 /16" 12 " 15 /8 " 3.02 cm 4.60 cm 40.32 cm

3 3 1 1 /4 " 1 /8 " 6" 12 /2" 4.45 cm 3.49 cm 31.75 cm

3 3 2 /8 " 1 " 6 /4 " 6.03 cm 2.54 cm 17.15 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/shortboard/67p/ 23 (310) 225-6774 SHORTBOARD 6’8”ADesigned by ROCKER THICKNESS WIDTH 5 3 5 /16" 1" 3 /4" PAT RAWSON 13.49 cm 2.54 cm 9.53 cm Introduced: July 2006 Overall Bottom Length: 6’7 3/4” (202.57 cm) 11 7 3 " 1 /16" 6" 10 /8" 7.62 cm 4.29 cm 27.62 cm Tip-to-Tip Deck Length: 6’7” (200.66 cm)

5 9 Max Width: 21 7/8” (55.56 cm) 1 /8 " 2 3/16" 12 " 15 /16" 4.13 cm 5.56 cm 39.53 cm Max Thickness: 2 15/16” (7.46 cm)

7 1 3 /8 " 2 /2 " 18 " 18 /8 " 1.95 ft3 (55.3 L) 2.22 cm 6.35 cm 46.67 cm Displacement:

7 3 1 /16" 2 /4 " 24 " 20 /8 " 1.11 cm 6.99 cm 51.12 cm

7 2 15/16" Center 21 /8" 7.46 cm 55.56 cm

“I have listened to many shaper’s feed- back over the years with this blank. The slightly wider outline allows for board 5 11 1 /16" 2 /16" 24 " 20 /16" designs ranging from Shortboards to Fun 0.79 cm 6.83 cm 50.96 cm shapes. The Natural Rocker is good for vee tail and contour nose shapes. The

9 1 9 Hawaii Rocker can be used for high-per- 16 2 /2 " 18 " 18 /16" / " formance styles.” 1.43 cm 6.35 cm 47.15 cm PAT RAWSON

7 1 3 /8 " 2 /4 " 12 " 16 /4 " 2.22 cm 5.72 cm 42.55 cm

1 7 7 1 /4 " 1 /8 " 6" 13 /8 " 3.18 cm 4.76 cm 35.24 cm

3 1 1 1 /4 " 1 /2 " 9 /2 " 4.45 cm 3.81 cm 24.13 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fish-eggs/68a/ 24 (310) 225-6774 SHORTBOARD 6’8”AXDesigned by ROCKER THICKNESS WIDTH 5 3 3 PAT RAWSON 5 /16" 1 /8 " 3 /4" Introduced: July 2006 13.49 cm 3.49 cm 9.53 cm Overall Bottom Length: 6’7 3/4” (202.57 cm)

1 7 3 " 2 /16" 6" 10 /8" 7.62 cm 5.24 cm 27.62 cm Tip-to-Tip Deck Length: 6’7” (200.66 cm)

Max Width: 21 7/8” (55.56 cm) 5 9 1 /8 " 2 9/16" 12 " 15 /16" 4.13 cm 6.51 cm 39.53 cm Max Thickness: 3 5/16” (8.41 cm) 6’8”A with 3/8” added thickness overall 7 7 /8 " 2 /8 " 18 " 18 3/8 " 2.22 cm 7.30 cm 46.67 cm Displacement: 2.24 ft3 (63.5 L)

7 1 1 /16" 3 /8 " 24 " 20 /8 " 1.11 cm 7.94 cm 51.12 cm

7 3 5/16" Center 21 /8" 8.41 cm 55.56 cm

“This is a 3/8” thicker version than the 6’8”A. I have listened to many shaper’s feedback over the years with this blank. 5 1 1 The slightly wider outline allows for board /16" 3 /16" 24 " 20 /16" 0.79 cm 7.78 cm 50.96 cm designs ranging from Shortboards to Fun shapes. The Natural Rocker is good for vee tail and contour nose shapes. The 9 7 9 /16" 2 /8 " 18 " 18 /16" Hawaii Rocker can be used for high-per- 1.43 cm 7.30 cm 47.15 cm formance styles.” PAT RAWSON 7 5 3 /8 " 2 /8 " 12 " 16 /4 " 2.22 cm 6.67 cm 42.55 cm

1 1 7 1 /4 " 2 /4 " 6" 13 /8 " 3.18 cm 5.72 cm 35.24 cm

3 7 1 1 /4 " 1 /8 " 9 /2 " 4.45 cm 4.76 cm 24.13 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fish-eggs/68ax/ 25 (310) 225-6774 SHORTBOARD 6’8”PDesigned by ROCKER THICKNESS WIDTH TIMMY PATTERSON 1 7 1 Introduced: July 2006 5 /16" / 8 " 4 /2" 12.86 cm 2.22 cm 11.43 cm Overall Bottom Length: 6’7 1/2” (201.93 cm)

1 3 1 3 /16" 1 /16" 6" 10 /2 " Tip-to-Tip Deck Length: 6’6 3/4” (200.03 cm) 7.78 cm 3.02 cm 26.67 cm Max Width: 21 3/8” (54.29 cm) 13 11 1 1 /16" 1 /16" 12 " 14 /2" 4.60 cm 1.69 cm 36.83 cm Max Thickness: 2 3/4” (6.99 cm)

3 1 1 Displacement: 1.57 ft (44.4 L) 1 " 2 /16" 18 " 17 /4 " 2.54 cm 5.24 cm 43.82 cm

1 3 1 /2 " 2 /8" 24 " 19 /4 " 1.27 cm 6.03 cm 48.90 cm

3 2 /4 " Center 21 3/8 " 6.99 cm 54.29 cm

“Blank is designed for team boards and production shaping. Slightly narrower and longer than the 6’7”P, but with matching 3 7 3 /8 " 2 /16" 24 " 19 /4 " thicknesses. It’s a medium tolerance 0.95 cm 6.19 cm 50.17 cm blank.” TIMMY PATTERSON 11 3 3 /16" 2 /16 " 18 " 18 /16" 1.75 cm 5.56 cm 46.19 cm

1 7 11 1 /8 " 1 /8 " 12 " 15 /16" 2.86 cm 4.76 cm 39.85 cm

5 1 1 1 /8" 1 /2 " 6" 12 /16" 4.13 cm 3.81 cm 30.64 cm

3 1 2 /16" 1" 6 /2 " 5.56 cm 2.54 cm 16.51 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/shortboard/68p/ 26 (310) 225-6774 FISH/EGG 6’8”RPDesigned by RICH PAVEL November 2008 ROCKER THICKNESS WIDTH Introduced: 1 5 " — 1 1/4 " 7 /2 " Overall Bottom Length: 6’9 1/2” (207.01 cm) 12.70 cm 3.18 cm 19.05 cm Tip-to-Tip Deck Length: 6’8 3/4” (205.11 cm) 1 11 5 3 /16" — 1 /16" 6" 14 /16" 7.78 cm 4.29 cm 36.35 cm Max Width: 25 1/8” (63.82 cm)

3 1 9 1 /4 " — 2 /8 " 12 " 18 /16 " Max Thickness: 3” (7.62 cm) 4.45 cm 5.40 cm 47.15 cm

Displacement: 2.25 ft3 (63.8 L) 15 /16" — 2 7/16" 18 " 21 1/ 2 " 2.38 cm 6.19 cm 54.61 cm

7 11 3 /16" — 2 /16" 24 " 23 /8 " 1.11 cm 6.83 cm 59.37 cm

— 3 " Center 25 1/ 8 " 7.62 cm 63.82 cm

“Very versatile and designed with in- put from some of surfing’s best design minds, the 6’8”RP is influenced by a 3 3 3 /8 " — 2 /4 " 24 " 23 /8 " universal rocker and timeless profiles. 0.95 cm 6.96cm 59.37 cm This blank accommodates the trend to ride shorter, fuller volume boards. It also 5 1 15 provides enough volume for new levels of /8 " — 2 /2 " 18 " 21 /16" 1.59 cm 6.35 cm 55.72 cm self-expression for shapers. Excellent for contemporary Lis-Fish. Big brother to the

1 3 5’10”RP.” 1 /16" — 2 /16" 12 " 20 " 2.70 cm 5.56 cm 50.80 cm RICH PAVEL

1 13 3 1 /2 " — 1 /16" 6" 17 /8 " 3.81 cm 4.60 cm 44.13 cm

1 7 3 2 /8 " — 1 /16" 13 /4 " 5.40 cm 3.65 cm 34.93 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fish-eggs/68rp/ 27 (310) 225-6774 SHORTBOARD ROCKER THICKNESS WIDTH 6’9”EADesigned by 9 15 5 /16" /16" 4 " 14.13 cm 2.38 cm 10.16 cm ERIC ARAKAWA Introduced: July 2006 7 3 1 3 /16" 1 /8 " 6" 10 /8" 8.73 cm 3.49 cm 25.72 cm Overall Bottom Length: 6’9” (205.74 cm)

Tip-to-Tip Deck Length: 6’8” (203.20 cm) 1 2 " 1 7/8 " 12 " 14 /8 " 5.08 cm 4.76 cm 35.88 cm Max Width: 21 5/16” (54.13 cm)

1 3 1 1 /8 " 2 /16" 18 " 17 /16" Max Thickness: 2 15/16” (7.46 cm) 2.86 cm 5.56 cm 43.34 cm Displacement: 1.71 ft3 (48.3 L) 9 1 1 /16" 2 /2 " 24 " 19 /8" 1.43 cm 6.35 cm 48.58 cm

15 2 /16" Center 21 5/16" 7.46cm 54.13 cm

“This blank is designed to yield most modern Shortboard designs. The thicker 7 5 9 /16" 2 /8 " 24 " 19 /16" nose and tail give it added versatility for 1.11 cm 6.67 cm 49.69 cm machining. I designed the rocker and foil to accommodate low and full rocker

3 3 7 designs.” /4 " 2 /8 " 18 " 17 /8 " 1.91 cm 6.03 cm 45.40 cm ERIC ARAKAWA

3 5 1 /16" 2 " 12 " 15 /8" 3.02 cm 5.08 cm 39.69 cm

3 5 3 1 /4 " 1 /8 " 6" 12 /8 " 4.45 cm 4.13 cm 31.43 cm

1 1 2 /2 " 1 /8 " 7” 6.35 cm 2.86 cm 17.78 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/shortboard/68ea/ 28 (310) 225-6774 SHORTBOARD 6’9”RDesigned by RUSTY PREISENDORFER ROCKER THICKNESS WIDTH Introduced: October 2014 7 6 " 4 /8 " 1/8 1 " 15.24 cm 12.38 cm 2.86 cm Overall Bottom Length: 6’10 1/4” (208.92 cm)

Tip-to-Tip Deck Length: 6’9 5/8” (207.33 cm) 3 " 1 3/4 " 6" 13" 7.62 cm 4.45 cm 33.02 cm Max Width: 23 1/8” (58.74 cm)

3 3 1 /4 " 2 7/16" 12 " 17 /8 " 4.45 cm 6.19 cm 44.13 cm Max Thickness: 3 9/16” (9.05 cm)

Displacement: 2.406 ft3 (68.1 L) 1 " 2 7/8 " 18 " 20" 2.54 cm 7.30 cm 50.80 cm

7 3 3 /16" 3 /16" 24 " 21 /4" 1.11 cm 8.10 cm 55.25 cm

9 3 /16" Center 23 1/8 " 9.05 cm 58.74 cm

“The big brother to the 6’5”R to cover models in the upper size range. Designed to be a versatile blank for shorter, wid- 7 1 7 er, relaxed rockered board; somewhere /16" 3 /4 " 24 " 21 /16" 1.11 cm 8.26 cm 54.45 cm between a Fish and a performance Shortboard, with added volume under

3 15 the chest. The semi-flat deck and thicker /4 " 3 " 18 " 19 /16" 1.91 cm 7.62 cm 50.64 cm nose and tail provide a wide range of options.”

3 9 3 RUSTY PREISENDORFER 1 /16" 2 /16" 12 " 17 /4" 3.02 cm 6.51 cm 45.09 cm

3 1 5 1 /4 " 2 /16" 6" 14 /8 " 4.45 cm 5.24 cm 37.15 cm

3 1 5 2 /8 " 1 /2 " 9 /8 " 6.03 cm 3.81 cm 24.45 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/shortboard/69r/ 29 (310) 225-6774 FISH/EGG 6’10”ADesigned by ROCKER THICKNESS WIDTH

5 " 1 3/8 " 8 " PAT RAWSON 12.70 cm 3.49 cm 20.32 cm Introduced: July 2006 Overall Bottom Length: 6’10” (208.28 cm) 3 7 1 3 /16" 1 /8 " 6" 15 /16" 8.10 cm 4.76 cm 38.26 cm Tip-to-Tip Deck Length: 6’9 1/2” (207.01 cm)

3 1 2 " 2 /8 " 12 " 19 /16" Max Width: 24” (60.96 cm) 5.08 cm 6.03 cm 48.42 cm Max Thickness: 3 1/2” (8.89 cm) 3 7 3 1 /16" 2 /8 " 18 " 21 /8 " 3 3.02 cm 7.30 cm 54.29 cm Displacement: 2.52 ft (71.4 L)

5 1 7 /8 " 3 /8 " 24 " 22 /8" 1.59 cm 7.94 cm 58.10 cm

1 1 /16" 3 /2 " 36 " 24" 0.16 cm 8.89 cm 60.96 cm

7 3 /16" Center 24" 8.73 cm 60.96 cm

3 3 3 /64" 3 /8" 36 " 23 /4" 0.12 cm 8.57 cm 60.33 cm

“This is my big guy Fish blank, designed to be able to easily net a 6’9” bottom measurement. Ideal for 6’5” to 6’9” length 3 3 /8 " 3" 24 " 21 /4" contemporary, retro Fish, or Single-Fin 0.95 cm 7.62 cm 55.25 cm design.” PAT RAWSON 11 11 1 /16" 2 /16" 18 " 20 /16" 1.75 cm 6.83 cm 50.96 cm

1 5 1 1 /16" 2 /16" 12 " 18 /8" 2.70 cm 5.87 cm 46.04 cm

7 15 3 1 /16" 1 /16" 6" 15 /4" 3.65cm 4.92 cm 40.01 cm

7 1 1 /8" 1 /2 " 12" 4.76cm 3.81 cm 30.48 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fish-eggs/610a/ 30 (310) 225-6774 SHORTBOARD 7’0”ADesigned by ROCKER THICKNESS WIDTH 1 5 PAT RAWSON 5 /2 " 1" 4 /8" Introduced: July 2006 13.97 cm 2.54 cm 11.75 cm Overall Bottom Length: 6’11 1/2” (212.09 cm)

1 9 7 3 /8 " 1 /16" 6" 11 /16" 7.94 cm 3.97 cm 29.05 cm Tip-to-Tip Deck Length: 6’10 3/4” (210.19 cm)

Max Width: 22 1/8” (56.20 cm) 3 1 5 1 / 4 " 2 /16" 12 " 15 /8 " 4.45 cm 5.24 cm 39.69 cm Max Thickness: 3 3/16” (8.10 cm)

1 3 1 " 2 /2" 18 " 18 /8 " Displacement: 2.12 ft3 (60.0 L) 2.54 cm 6.35 cm 46.67 cm

1 13 1 /2 " 2 /16" 24 " 20 /8" 1.27 cm 7.14 cm 51.12 cm

1 1 7 /32" 3 /8 " 36 " 21 /8 " 0.08 cm 7.94 cm 55.56 cm

3 1 3 /16" Center 22 /16" 8.10 cm 56.04 cm

1 1 9 /16" 3 /8" 36 " 21 /16" 0.16 cm 7.94 cm 54.77 cm “The slightly wider outline allows for board designs ranging from bigger guy Shortboards to Funshapes. The Natural Rocker is good for Vee in the tail and

7 3 5 contoured bottom designs. The Hawaii /16" 2 /4 " 24 " 19 /8 " 1.11 cm 6.99 cm 49.85 cm Rocker can be used for hi-performance styles.”

11 1 7 PAT RAWSON /16" 2 /2 " 18 " 17 /8 " 1.75 cm 6.35 cm 45.40 cm

1 3 3 1 /16" 2 /16" 12 " 15 /4 " 2.70 cm 5.56 cm 40.00 cm

1 7 3 1 /2 " 1 /8 " 6" 12 /4 " 3.81 cm 4.76 cm 32.39 cm

3 2" 1 /8" 8 1/2 " 5.08 cm 3.49 cm 21.59 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/shortboard/70a/ 31 (310) 225-6774 SHORTBOARD 7’1”ADesigned by ROCKER THICKNESS WIDTH

11 1 1 PAT RAWSON 5 /16" 1 /8 " 4 /2" Introduced: July 2006 14.45 cm 2.86 cm 11.43 cm Overall Bottom Length: 7’0 7/8” (215.58 cm)

3 1 1 /4" 6" 11 1/8 " 3 /2 " 6’11” (213.04 cm) 8.89 cm 4.45 cm 28.26 cm Tip-to-Tip Deck Length:

Max Width: 22 3/16” (56.36 cm) 1 3 1 2 /16" 2 /16" 12 " 15 /2 " 5.56 cm 39.37 cm 5.24 cm Max Thickness: 3” (7.62 cm)

1 1 3 3 1 /4 " 2 /2 " 18 " 18 /8" Displacement: 2.05 ft (58.1 L) 3.18 cm 6.35 cm 46.67 cm

11 3 3 /16" 2 /4" 24 " 20 /16" 1.75 cm 6.99 cm 51.28 cm

3 1 /32" 3" 36 " 22 /16" 0.24 cm 7.62 cm 56.04 cm

3 3" Center 22 /16" 7.62 cm 56.36 cm

1 15 3 /16" 2 /16 " 36 " 21 /4" 0.16 cm 7.46 cm 55.25 cm “About 3/16” thinner than the 7’0”A, this can net a 6’11” bottom length. The Natu- ral Rocker is good for Vee in the tail and contoured bottom designs. The Hawaii Rocker can be used for hi-performance 3 5 9 /8 " 2 /8 " 24 " 19 /16" styles. I personally like the 7’2”EA bottom 0.95 cm 6.67 cm 44.69 curve glued-up with this one for a flatter deck design.” 11 7 13 /16" 2 /16" 18 " 17 /16" PAT RAWSON 1.75 cm 6.19 cm 45.24 cm

1 5 1 " 2 /8" 12 " 15 /8" 2.cm 5.40 cm 39.69 cm

7 13 3 1 /16" 1 /16" 6" 12 /4 " 3.65 cm 4.60 cm 32.39 cm

1 5 2 /16" 1 /16" 9 " 5. cm 3.33 cm 22.86 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/shortboard/71a/ 32 (310) 225-6774 FUNBOARD 7’1”EADesigned by ROCKER THICKNESS WIDTH ERIC ARAWKAWA Introduced: July 2006 3 7 1 5 /8 " / 8 " 3 /4" 13.65 cm 2.22 cm 8.26 cm Overall Bottom Length: 7’0 1/2” (214.63 cm)

5 1 1 6’11 3/4” (212.73 cm) 3 /16" 1 /2" 6" 11 /8 " Tip-to-Tip Deck Length: 8.41 cm 3.49 cm 28.26 cm Max Width: 22 9/16” (57.31 cm) 15 1 /16" 2 " 12 " 15 3 / 4" 4.92 cm 5.08 cm 40.01 cm Max Thickness: 3” (7.62 cm)

3 1 3 5 Displacement: 1.93 ft (54.6 L) 1 /8 " 2 /8" 18 " 18 / 8" 2.86 cm 6.03 cm 47.31 cm

9 11 /16" 2 /16" 24 " 20 7/16" 1.43 cm 6.83 cm 51.91 cm

1 15 5 /32" 2 /16" 36 " 22 /16" 0.08 cm 7.46 cm 56.67 cm

9 3 " Center 22 /16" 7.62 cm 57.31 cm

1 15 /16" 2 /16" 36 " 22 5/16" 0.16 cm 7.46 cm 56.67 cm “The slightly wider outline allows for board designs ranging from bigger guy Shortboards to Funshapes. The Natural Rocker is good for Vee in the tail and contoured bottom designs. The Hawaii 5 1 /16" 2 11/16" 24 " 20 /2 " Rocker can be used for hi-performance 0.79 cm 6.83 cm 52.07 cm styles.” PAT RAWSON 5 7 11 /8 " 2 /16" 18 " 18 /16" 1.59 cm 6.19 cm 47.47 cm

1 1 1 " 2 /8 " 12 " 16 / 4 " 2.54 cm 5.40 cm 41.28 cm

1 5 7 1 /2 " 1 /8 " 6" 12 /16" 3.81 cm 4.13 cm 31.59 cm

1 2 /4 " 1" 6 " 5.72 cm 2.54 cm 15.24 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fun-boards/71ea/ 33 (310) 225-6774 GUN 7’2”EADesigned by ROCKER THICKNESS WIDTH

1 15 1 6 /16" /16" 3 /2 " ERIC ARAKAWA 15.40 cm 2.38 cm 8.89 cm Introduced: April 2007 Overall Bottom Length: 7’2 1/2” (219.71 cm) 7 5 1 3 / 8 " 1 /16" 6" 9 /4 " 9.84 cm 3.33 cm 23.50 cm Tip-to-Tip Deck Length: 7’1 7/8” (218.12 cm)

5 13 1 2 / 16" 1 /16" 12 " 13 / 4" Max Width: 21 5/8” (54.93 cm) 5.87 cm 4.60 cm 33.66 cm Max Thickness: 2 15/16” (7.46 cm) 1 1 1 1 /4 " 2 /4 " 18 " 16 / 4" 3.18 cm 5.72 cm 41.28 cm Displacement: 1.89 ft3 (53.4 L)

5 9 9 /8 " 2 /16" 24 " 18 /16" 1.59 cm 6.51 cm 47.15 cm

1 7 3 /16" 2 /8 " 36 " 21 /16" 0.16 cm 7.30 cm 53.82 cm

5 2 15/16" Center 21 /8 " 7.46 cm 54.93 cm

1 7 7 /16" 2 /8 " 36 " 21 /16" 0.16 cm 7.30 cm 54.45 cm “This blank is a versatile high-perfor- mance semi-gun which was designed in series with the 7’8”EA. The rocker and foil will accommodate a wide variety of bottom contours.”

1 5 3 / 2 " 2 /8 " 24 " 19 /8" ERIC ARAKAWA 1.27 cm 6.67 cm 49.21 cm

13 3 9 /16" 2 /8 " 18 " 17 / 16 " 2.06 cm 6.03 cm 44.61 cm

5 1 1 1 /16" 2 /16" 12 " 15 /4 " 3.33 cm 5.24 cm 38.74 cm

15 11 15 1 / 16" 1 /16" 6" 11 /16" 4.92 cm 4.29 cm 30.32 cm

9 3 1 2 / 16" 1 /8 " 6 /4 " 6.51 cm 3.49 cm 15.88 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/guns/72ea/ 34 (310) 225-6774 FISH/EGG 7’3”ADesigned by ROCKER THICKNESS WIDTH 5 3 3 5 /16" 1 /8 " 7 /8 " PAT RAWSON 13.49 cm 3.49 cm 18.73 cm Introduced: July 2006 Overall Bottom Length: 7’2 7/8” (220.66 cm) 1 7 1 3 /2 " 1 /8 " 6" 14 /2" 8.89 cm 4.76 cm 36.83 cm Tip-to-Tip Deck Length: 7’2 3/8” (219.39 cm)

1 7 1 2 /4 " 2 /16" 12 " 18 /2 " Max Width: 24” (60.96 cm) 5.72 cm 6.19 cm 46.99 cm Max Thickness: 3 5/8” (9.21 cm) 3 7 1 /8 " 2 /8 " 18 " 21" 3.49 cm 7.30 cm 53.34 cm Displacement: 2.74 ft3 (77.7 L)

3 3 1 / 4 " 3 /16" 24 " 22 /2 " 1.91 cm 8.10 cm 57.15 cm

1 9 /8 " 3 /16" 36 " 24" 0.32 cm 9.05 cm 60.96 cm

3 9/16" Center 24" 9.05 cm 60.96 cm

3 7 1 /32" 3 /16" 36 " 23 /2" 0.24 cm 8.73 cm 59.69 cm “This is my enlarged version of the 6’10”A Fish blank. I designed this one to be able to easily net 7’1” by the bottom measure- ment. Should net 6’9” to 7’1” length for contemporary, retro Fish, or Single-Fin 1 3 /2 " 3 " 24 " 21 /8" designs.” 1.27 cm 7.62 cm 54.29 cm PAT RAWSON

13 11 13 /16" 2 /16" 18 " 19 /16" 2.06 cm 6.83 cm 50.32 cm

3 5 3 1 /16" 2 /16" 12 " 17 /4" 3.02 cm 5.87 cm 45.09 cm

5 15 1 1 / 8 " 1 /16" 6" 15 /16" 4.13 cm 4.92 cm 38.52 cm

1 1 2 / 16" 1 /2 " 11" 5.24 cm 3.81 cm 27.94 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fish-eggs/73a/ 35 (310) 225-6774 FISH/EGG 7’4”SPDesigned by ROCKER THICKNESS WIDTH CHARLIE SMITH & 1 4 1 /8 " 1 /2 " 10.48 cm 3.81 cm TOM PARRISH Introduced: June 2014 1 7 1 2 /2 " 1 / 8 " 6" 17 /4" 6.35 cm 4.76 cm 43.82 cm Overall Bottom Length: 7’5 11/16” (227.81 cm)

9 1 3 1 /16" 2 /4 " 12 " 20 / 8" Tip-to-Tip Deck Length: 7’4 3/4” (225.43 cm) 3.97 cm 5.72 cm 51.75 cm Max Width: 24 3/16” (61.44 cm) 15 11 3 /16" 2 /16" 18 " 22 /16" 2.38 cm 56.36 cm 6.83 cm Max Thickness: 3 3/8” (8.57 cm)

1 5 3 /2 " 3 " 24 " 23 /16 " Displacement: 2.723 ft (77.1 L) 1.27 cm 7.62 cm 59.21 cm

1 5 3 /16 " 3 /16" 36 " 24 /16" 0.16 cm 8.41 cm 61.44 cm

3 1 3 / 8 " Center 24 /16" 8.57 cm 61.12 cm

1 1 3 /16 " 3 /4 " 36 " 23 /8 " 0.16 cm 8.26 cm 59.37 cm “The 7’4”SP & the 7’10”SP were built together on Maui and are similar to the 8’4”SP, offering a more complete size progression for mini Longboards. The outlines of both were widened relative

7 15 7 to the 8’4”SP to make them usable for a /16" 2 /16" 24 " 21 /16" 1.11 cm 7.46 cm 54.45 cm broader range of designs. Natural Rocker is fairly neutral in both the nose and tail,

3 11 7 with enough thickness to shape them up /4 " 2 /16" 18 " 19 / 8 " 1.91 cm 6.83 cm 50.48 cm or down, according to the shaper’s prefer- ence. Ideal for boards in the 6’10” to 7’4”

1 3 1 range.” 1 / 8 " 2 /8 " 12 " 17 /2 " 2.86 cm 6.03 cm 44.45cm TOM PARRISH

5 15 1 /8 " 1 / 16" 6" 14 " 4.13 cm 4.92 cm 35.56 cm

3 3 1 /8 " 1 2 /8 /2" " 3.49 cm 7 6.03 cm 19.05 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fish-eggs/74sp/ 36 (310) 225-6774 FUNBOARD 7’5”ADesigned by ROCKER THICKNESS WIDTH PAT RAWSON 6 " 1" 4 3/4 " Introduced: July 2006 15.24 cm 2.54 cm 12.07 cm Overall Bottom Length: 7’4 1/2” (224.79 cm)

9 1 3 /16" 1 /2 " 6" 11" 9.05 cm 3.81 cm 27.94 cm Tip-to-Tip Deck Length: 7’3 7/16” (222.09 cm)

1 3 Max Width: 21 7/8” (55.56 cm) 2 /16" 2 " 12 " 15 /16" 5.24 cm 5.08 cm 38.58 cm Max Thickness: 3” (7.62 cm)

3 3 1 /16" 2 /8 " 18 " 18" 3 3.02 cm 6.03 cm 45.72 cm Displacement: 2.13 ft (60.2 L)

11 5 11 /16" 2 /8 " 24 " 19 /16" 1.75 cm 6.67 cm 50.01 cm

1 15 5 /8 " 2 /16" 36 " 21 /8" 0.32 cm 7.46 cm 54.93 cm

3" Center 21 7/8 " 7.62 cm 55.56 cm

3 7 1 /32" 2 /8" 36 " 21 /4" 0.24 cm 7.30 cm 53.96 cm “Will net 7’3” bottom length. The Natural Rocker is good for Vee in the tail and contoured bottom designs. The Hawaii Rocker can be used for hi-performance styles. I personally like the 7’2”EA bottom extended curve glued up with this one for 1 9 3 /2 " 2 /16" 24 " 19 /16" a flatter deck design.” 1.27 cm 6.51 cm 48.74 cm PAT RAWSON

13 3 1 /16" 2 /8 " 18 " 17 /2" 2.06 cm 6.03 cm 44.45 cm

3 1 3 1 /16" 2 /16" 12 " 15 /8" 3.02 cm 5.24 cm 39.05 cm

5 3 11 1 /8 " 1 /4 " 6" 12 /16" 4.13 cm 4.45 cm 32.23 cm

1 3 1 2 /8 " 1 /8 " 8 /2 " 5.40 cm 3.49 cm 21.59 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fun-boards/75a/ 37 (310) 225-6774 FUNBOARD 7’6”EADesigned by ROCKER THICKNESS WIDTH

3 1 7 5 /8 " — 1 /16" 2 /8" ERIC Introduced:ARAKAWA July 2006 13.65 cm 2.70 cm 7.30 cm Overall Bottom Length: 7’6” (228.60 cm) 7 15 3 /16" — 1 1/2 " 6" 10 /16" 8.73 cm 3.81 cm 27.78 cm Tip-to-Tip Deck Length: 7’5 3/8” (227.01 cm)

1 1 5 23” (58.42 cm) 2 /16" — 2 /16" 12 " 15 /8 " Max Width: 5.24 cm 5.24 cm 39.69 cm Max Thickness: 3 3/16” (8.10 cm) 1 1 1 /4 " — 2 /2 " 18 " 18 11/16" 3.18 cm 6.35cm 47.47 cm Displacement: 2.28 ft3 (64.6 L)

11 5 /16" — 2 3/4 " 24 " 20 /8" 1.75 cm 6.99 cm 52.39 cm

1 1 5 /8 " — 3 /8" 36 " 22 /8" .32 cm 7.94 cm 57.47 cm

15 — 3 3/16" Center 22 /16" 8.10 cm 58.26 cm

1 1 7 /8 “ — 3 /16" 36 " 22 /16" “This is primarily designed for making .32 cm 7.78 cm 56.99 cm Funboards. It comes with a moderate but continuous even rocker and foil to make “positioning” the blank for the shape process easy. The deck contour tapers to keep the foam harder on the rail on the 1 3 /2 " — 2 11/16" 24 " 20 /8" finished shape. It’s a longer version of the 1.27 cm 6.83 cm 51.75 cm 7’1”EA.” ERIC ARAKAWA 7 7 1 /8 " — 2 /16" 18 " 18 /2 " 2.22 cm 6.19 cm 46.99 cm

1 1 1 1 /4 " — 2 /8" 12 " 16 /8 " 3.18 cm 5.40 cm 40.96 cm

3 5 1 / 4 " — 1 3/4 " 6" 12 /8" 4.45 cm 4.45 cm 32.07 cm

5 3 2 /16" — 1 /8 " 6 5/8 " 5.87 cm 3.49 cm 16.83 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fun-boards/76ea/ 38 (310) 225-6774 FUNBOARD 7’7”ADesigned by ROCKER THICKNESS WIDTH

3 3 PAT RAWSON 6 " 1 /8 " 4 /4 " Introduced: July 2006 15.24 cm 3.50 cm 12.07 cm Overall Bottom Length: 7’6 5/8” (230.19 cm) 5 4 " 1 /8 " 6" 1113/16" 10.16 cm 4.13cm 30.00 cm Tip-to-Tip Deck Length: 7’6” (228.60 cm)

9 5 1 2 /16" 2 /16" 12 " 16 /4" Max Width: 22 7/8” (58.10 cm) 6.51 cm 5.87 cm 41.28 cm Max Thickness: 3 7/16” (8.73 cm) 5 3 1 /8 " 2 / 4 " 18 " 19" 4.13 cm 6.99 cm 48.26 cm Displacement: 2.63 ft3 (74.6 L)

15 1 3 /16" 3 /16" 24 " 20 /4 " 2.38 cm 7.78 cm 52.71 cm

3 7 11 /16" 3 /16" 36 " 22 /16" .48 cm 8.73 cm 57.63 cm

7 7 3 /16" Center 22 /8 " 8.73 cm 58.10 cm

1 5 1 /8 " 3 /16" 36 " 22 /8 " “The thicker 7’7”A blank easily nets a .32 cm 8.41 cm 56.20 cm 7’5” bottom length. The Natural Rocker is good for Vee in the tail and contoured bot- tom designs. The Hawaii Rocker can be used for hi-performance styles. I person- ally like the 7’8”EA bottom curve (Hawaii 9 7 15 /16 " 2 /8 " 24 " 19 /16" Rocker) glued up with this one for a flatter 1.43 cm 7.30 cm 50.64 cm deck design for a bigger rider.” PAT RAWSON 13 5 1 /16" 2 /8 " 18 " 18 /8 " 2.06 cm 6.67 cm 46.04 cm

1 5 1 1 /4 " 2 /16" 12 " 16 /8 " 3.18 cm 5.87 cm 40.96 cm

11 15 1 1 /16" 1 /16" 6" 13 /2 " 4.29 cm 4.92 cm 34.29 cm

3 1 3 2 /16" 1 / 2 " 9 /4 " 5.56 cm 3.81 cm 24.77 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fun-boards/77a/ 39 (310) 225-6774 GUN 7’8”EADesigned by ROCKER THICKNESS WIDTH 3 6 /16" 1 " 3 3/16" 15.72 cm 2.54 cm 8.01 cm ERIC Introduced:ARAKAWA June 2007

3 7 Overall Bottom Length: 7’9” (236.22 cm) 4 " 1 /8 " 6" 8 /8 " 10.16 cm 3.49 cm 22.54 cm Tip-to-Tip Deck Length: 7’8 3/16” (234.16 cm)

1 13 3 2 /2 " 1 /16" 12 " 12 / 4 " 6.35 cm 4.60 cm 32.39 cm Max Width: 21 7/8” (55.56 cm)

Max Thickness: 3” (7.62 cm) 1 1 1 /2 " 2 /4 " 18 " 16" 3.81 cm 5.72 cm 40.64 cm Displacement: 2.03 ft3 (57.5 L)

13 9 3 /16" 2 /16" 24 " 18 / 16" 2.06 cm 6.51 cm 46.20 cm

1 / 8 " 3 " 36 " 21" 0.32 cm 7.62 cm 53.34 cm

7 3 " Center 21 / 8" 7.62 cm 55.56 cm

1 7 1 / 8 " 2 / 8" 36 " 21 /8 " “Designed in series with the 7’2”EA to 0.32 cm 7.30 cm 53.66 cm yield Guns in the 7’0” to 7’7” range. This blank is a versatile high-performance semi-Gun. The rocker and foil will ac- commodate a wide variety of bottom contours.” 5 9 13 /8 " 2 / 16" 24 " 18 / 16" ERIC ARAKAWA 1.59 cm 6.51 cm 47.78 cm

5 7 1 " 2 /16" 18 " 16 / 8" 2.54 cm 5.87 cm 42.86 cm

3 1 1 /8 " 2 " 12 " 14 / 2" 3.49 cm 5.08 cm 36.83 cm

15 5 3 1 /16" 1 / 8 " 6" 11 /8 " 4.92 cm 4.13 cm 28.89 cm

5 3 9 2 /8 " 1 /8 " 6 /16" 6.67 cm 3.49 cm 16.67 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/guns/78ea/ 40 (310) 225-6774 FISH/EGG 7’9”HDesigned by THICKNESS WIDTH 1 1 ROGER HINDS 3 /2 " 1 /8 " Introduced: July 2006 8.89 cm 2.86 cm Overall Bottom Length: 7’8 5/8” (235.27 cm)

9 11 1 2 /16" 1 /16" 6" 16 /4" 6.51 cm 4.29 cm 41.28 cm Tip-to-Tip Deck Length: 7’8 3/8” (234.63 cm)

7 1 3 Max Width: 23 9/16” (59.85 cm) 1 /8 " 2 /16" 12 " 19 / 4" 4.76 cm 5.24 cm 50.17 cm Max Thickness: 3 3/16” (8.10 cm) 5 5 1 1 /16" 2 /16" 18 21 /2" " 3 3.33 cm 5.87 cm 54.61 cm Displacement: 2.51 ft (71.2 L)

7 5 5 /8 " 2 /8 " 24 " 22 /8" 2.22 cm 6.67 cm 57.47 cm

3 1 /16 " 3 " 36 " 23 /2" .48 cm 7.62 cm 59.69 cm

9 3 3/16" Center 23 /16" 8.10 cm 59.85 cm

3 1 3 “Designed for retro Funshapes. Based /16 " 3 /16" 36 " 22 /4 " .48 cm 7.78 cm 57.79 cm on feedback from the 7’11”H and 8’4”H, improvements were made in the thick- ness and foil. Should accommodate many rockers and ideally be hand-shaped.” ROGER HINDS 13 5 7 /16" 2 /8 " 24 " 20 /8" 2.06 cm 6.67 cm 53.02 cm

3 3 1 1 /16" 2 /8 " 18 " 19 / 4" 3.02 cm 6.03 cm 48.90 cm

11 1 1 1 /16" 2 /16" 12 " 17 /16" 4.29 cm 5.24 cm 43.34 cm

1 5 11 2 /4 " 1 / 8 " 6" 13 /16" 5.40 cm 4.13 cm 34.77 cm

15 3 1 2 /16" 1 /16" 8 /2 " 7.46 cm 3.02 cm 21.59 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fish-eggs/79h/ 41 (310) 225-6774 FISH/EGG 7’9”HXDesigned by ROCKER THICKNESS WIDTH 1 1 3 /2 " 1 /2 " ROGER HINDS July 2006 8.89 cm 3.81 cm Introduced: Overall Bottom Length: 7’8 5/8” (235.27 cm) 9 1 1 2 /16" 2 /16" 6" 16 /4" 6.51 cm 5.24 cm 41.28 cm Tip-to-Tip Deck Length: 7’8 3/8” (234.63 cm)

7 7 3 1 /8 " 2 /16" 12 " 19 / 4" Max Width: 23 9/16” (59.85 cm) 4.76 cm 6.19 cm 50.17 cm Max Thickness: 3 9/16” (9.05 cm) 5 11 1 1 /16" 2 /16" 18 " 21 /2" 7’9”H with 3/8” added thickness overall 3.33 cm 6.83 cm 54.61 cm Displacement: 2.86 ft3 (81.0 L) 7 5 /8 " 3 " 24 " 22 /8" 2.22 cm 7.62 cm 57.47 cm

3 3 1 /16 " 3 /8 " 36 " 23 /2" .48 cm 8.57 cm 59.69 cm

9 3 9/16" Center 23 /16" 9.05 cm 59.85 cm

3 7 3 /16 " 3 /16" 36 " 22 /4 " “This is a 3’8” thicker version of the 7’9”H. .48 cm 8.73 cm 57.79 cm Designed for retro Funshapes. Based on feedback from 7’11”H and the 8’4”H, improvements were made in the thick- ness and foil. Should accommodate many rockers and ideally be hand-shaped.” 13 7 /16" 3 " 24 " 20 /8" ROGER HINDS 2.06 cm 7.62 cm 53.02 cm

3 3 1 1 /16" 2 /4 " 18 " 19 / 4" 3.02 cm 6.99 cm 48.90 cm

11 7 1 1 /16" 2 /16" 12 " 17 /16" 4.29 cm 6.19 cm 43.34 cm

1 11 2 /4 " 2 " 6" 13 /16" 5.40 cm 5.08 cm 34.77 cm

15 9 1 2 /16" 1 /16" 8 /2 " 7.46 cm 3.97 cm 21.59 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fish-eggs/79hx/ 42 (310) 225-6774 FUNBOARD 7’10”SPDesigned by ROCKER THICKNESS WIDTH 1 3 4 /2 " 1 /8 " 11.43 cm 3.49 cm CHARLIE SMITH & TOM PARRISH 13 7 1 2 /16" 1 / 8 " 6" 17 /8" 7.14 cm 4.76 cm 43.50 cm Introduced: May 2014 Overall Bottom Length: 7’11 1/4” (241.94 cm) 13 5 7 1 /16" 2 /16" 12 " 20 / 16" 4.60 cm 5.87 cm 51.91 cm Tip-to-Tip Deck Length: 7’10 3/4” (240.67 cm)

11 1 1 2 /16" /4 1 /8 " 18 " 22 " Max Width: 24 3/8” (61.91 cm) 2.86 cm 6.83 cm 56.52 cm

Max Thickness: 3 3/8” (8.57 cm) 5 5 /8 " 3 " 24 " 23 /16" 1.59 cm 7.62 cm 59.21 cm Displacement: 2.892 ft3 (81.9 L)

1 5 5 /8 " 3 /16" 36 " 24 /16" 0.32 cm 8.41 cm 61.75 cm

3 3 3 / 8 " Center 24 /8" 8.57 cm 61.91 cm

1 1 7 “The 7’10”SP and the 7’4”SP were built /8 " 3 /4 " 36 " 23 /16" 0.32 cm 8.26 cm 59.53 cm together on Maui and are similar to the 8’4”SP, offering a more complete size progression for mini Longboards. The out- lines of both were widened relative to the 8’4”SP to make the usable for a broader

9 7 3 range of designs. Natural Rocker is fairly /16" 2 /8 " 24 " 21 /8" 1.43 cm 7.30 cm 54.29 cm neutral in both the nose and tail, with enough thickness to shape them up or

13 5 1 down, according to the shaper’s prefer- /16" 2 /8 " 18 " 19 / 2 " 2.06 cm 6.67 cm 49.53 cm ence. Ideal for boards in the 7’4” to 7’10” range.”

3 5 1 1 /16" 2 /16" 12 " 17 /8 " TOM PARRISH 3.02 cm 5.87 cm 43.50 cm

3 7 7 1 /4 " 1 / 8 " 6" 13 / 8" 4.45 cm 4.76 cm 35.24 cm

1 3 1 2 / 2 " 1 /8 " 8 /2" 6.35 cm 3.49 cm 21.59 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fun-boards/710sp/ 43 (310) 225-6774 GUN 7’11”ADesigned by ROCKER THICKNESS WIDTH 7 1 1 6 /16" 1 /8 " 3 /2 " 16.38 cm 2.86 cm 8.89 cm PATIntroduced: RAWSON September 2006

1/2” 13 11 1 Overall Bottom Length: 7’11 (242.57 cm) 4 /16" 1 /16" 6" 9 /8 " 10.64 cm 4.24 cm 23.18 cm Tip-to-Tip Deck Length: 7’10 11/16” (240.51 cm)

11 1 1 2 /16" 2 / 8 " 12 " 13 /4 " 6.83 cm 5.40 cm 33.66 cm Max Width: 21 7/8” (55.56 cm)

1/8” 11 7 3 Max Thickness: 3 (7.94 cm) 1 /16" 2 /16" 18 " 16 /8 " 4.29 cm 6.19 cm 41.59 cm Displacement: 2.32 ft3 (65.7 L)

1 11 5 1 /16" 2 /16" 24 " 18 /8 " 2.70 cm 6.83 cm 47.31 cm

1 1 5 / 4 " 3 /16" 36 " 21 /16" 0.64 cm 7.78 cm 54.13 cm

1 7 3 /8 " Center 21 / 8 " 7.94 cm 55.56 cm

“The mid-size Gun blank can net a 7’9” 1 5 /8 " 3 " 36 " 20 /8 " 0.32 cm 7.62 cm 52.39 cm bottom length. The Natural Rocker is good for Vee in the tail and contoured bottom designs. The Hawaii Rocker can be used for hi-performance styles.” PAT RAWSON

5 5 1 /8 " 2 /8 " 24 " 18 /8 " 1.59 cm 6.99 cm 46.04 cm

15 3 3 /16" 2 /8 " 18 " 16 /8 " 2.38 cm 6.03 cm 41.59 cm

3 1 1 / 8 " 2 /8 " 12 " 14 1/8 " 3.49 cm 5.40 cm 35.88 cm

7 3 1 1 / 8 " 1 /4 " 6" 11 /4 " 4.76 cm 4.45 cm 28.58 cm

1 7 1 2 /2 " 1 /16" 7 /8 " 6.35cm 3.65 cm 18.10 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/guns/711a/ 44 (310) 225-6774 FISH/EGG 8’0”HDesigned by THICKNESS WIDTH ROGER HINDS 9 15 Introduced: July 2006 3 /16" /16" 2.38 cm 9.05 cm Overall Bottom Length: 8’0 1/8” (244.16 cm) 3 3 5 1 /4 " 6" 15 /8" 2 /8 " Tip-to-Tip Deck Length: 7’11 5/8” (242.89 cm) 6.67 cm 4.45 cm 39.05 cm

7 1 1 Max Width: 23 5/8” (60.01 cm) 1 /8 " 2 /8 " 12 " 19 /16" 4.76 cm 5.40 cm 48.42 cm Max Thickness: 3 5/16” (8.41 cm) 1 1 1 1 / 4 " 2 /2 " 18 " 21 /16" 3 3.18 cm 6.35 cm 53.50 cm Displacement: 2.77 ft (78.4 L)

3 13 3 / 4 " 2 /16" 24 " 22 /16" 1.91 cm 7.14 cm 56.36 cm

3 3 7 /16" 3 /16" 36 " 23 /16" .48 cm 8.10 cm 59.53 cm

5 5 3 /16" Center 23 /8" 8.41 cm 60.01 cm

3 5 “Designed for retro Funshapes. Based on 1 16 /8 /4 " 3 / " 36 " 22 " feedback from 7’11”H and 8’4”H, improve- 8.10 cm 57.47 cm .64 cm ments were made in the thickness and foil. Should accommodate many rockers and ideally be hand-shaped.” ROGER HINDS 13 3 1 /16" 2 / 4 " 24 " 20 /2" 2.06 cm 6.99 cm 52.07 cm

1 7 13 1 /4 " 2 /16" 18 " 18 /16" 3.18 cm 6.19 cm 47.78 cm

3 1 7 1 / 4 " 2 /8 " 12 " 16 /16" 4.45 cm 5.40 cm 41.75 cm

7 3 2 / 8 " 1 /4 “ 6" 13" 7.30 cm 4.45 cm 33.02 cm

1 5 3 3 /8 " 1 /16" 6 /4" 7.94 cm 3.33cm 17.15 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fish-eggs/80h/ 45 (310) 225-6774 FUNBOARD 8’1”EADesigned by

THICKNESS WIDTH ERIC ARAKAWAIntroduced: July 2006 7 3 6 /16" — 1" — 3 /8" 16.35 cm 2.54 cm 8.57 cm Overall Bottom Length: 8’0 5/8” (245.43 cm)

3 7 1 4 /8 " — 1 /16" 6" — 12 /8 " Tip-to-Tip Deck Length: 7’11 3/4” (243.21 cm) 11.11 cm 3.65 cm 30.80 cm Max Width: 24 1/16” (61.19 cm) 7 1516 1 2 /8 " — 1 / " 12 " — 17 /16" 4.92 cm 43.34 cm 7.30 cm Max Thickness: 3 3/8” (8.57 cm)

13 7/16 13 1 /16" — 2 " 18 " — 19 /16" 3 4.60 cm 6.19 cm 50.32 cm Displacement: 2.66 ft (75.3 L)

1 13 9 1 /16" — 2 /16" 24 " — 21 /16" 2.70 cm 7.14 cm 54.77 cm

1 5 7 /4 " — 3 /16" 36 " — 23 /16" .64 cm 8.41 cm 59.53 cm

3 — 3 /8 " Center — 24 1/16" 8.57 cm 61.12 cm

3 3 7 “This is primarily designed for making /16" — 3 /16" 36 " — 23 /16" .48 cm 8.10 cm 59.53 cm Funboards. It comes with a moderate but continuous even rocker and foil to make positioning the blank for the shape process easy. It’s a longer version of the 7’6”EA, but I added width forward to 5 3 1 /8 " — 2 /4" 24 " — 21 /8 " accommodate wider noses.” 1.59 cm 6.99 cm 53.66 cm ERIC ARAKAWA 15 7 1 /16" — 2 /16" 18 " — 19 /4 " 2.38 cm 6.19 cm 48.90 cm

3 1 3 1 /8 " — 2 /8 " 12 " — 16 /4" 3.49 cm 5.40 cm 42.55 cm

11 2" — 1 /16" 6" — 13 3/8" 5.08 cm 4.29 cm 33.97 cm

11 5 3 2 /16" — 1 /16" — 7 /4 " 6.83 cm 3.33 cm 19.69 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fun-boards/81ea/ 46 (310) 225-6774 FUNBOARD 8’2”ADesigned by PAT RAWSON ROCKER THICKNESS WIDTH Introduced: July 2008 5 5 6 /8 " — 1 /16" — 4 " Overall Bottom Length: 8’2 1/2” (250.19 cm) 16.83 cm 3.33 cm 10.16 cm

3 13 1 Tip-to-Tip Deck Length: 8’1 1/2” (247.65 cm) 4 /8 " — 1 /16" 6" — 12 / 2 " 11.11 cm 4.60 cm 31.75 cm Max Width: 25” (63.50 cm) 11 7 3 2 / 16" — 2 /16" 12 " — 17 / 8" 6.83 cm 6.19 cm 44.13 cm Max Thickness: 4 1/16” (10.32 cm) 11 1 /16" 1 — 3 " 18 " — 20 / 4" Displacement: 3.59 ft3 (101.7 L) 4.29 cm 7.62 cm 52.07 cm

7 1 " — 3 3/8 " 24 " — 22 / 16" 2.54 cm 8.57 cm 56.99 cm

1 7 /4 " — 3 15/16" 36 " — 24 / 16" 0.64 cm 10.00 cm 62.07 cm

— 4 1/16" Center — 25" 10.32 cm 63.50 cm

3 7 1 “I designed the 8’2”A to be a serious ‘big /16" — 3 /8 " 36 " — 24 / 16" 0.48 cm 9.84 cm 61.12 cm guy’ blank for either high performance, retros, or fun Gun styles. It has a perfor- mance bottom curve and enough volume for 300lbs surfers. It should be able to yield 8’0” x 24” x 3 3/4” with ability to posi- 11 3 7 /16" — 3 /8 " 24 " — 21 /8 " tion the overall rocker and nose widths as 1.75 cm 8.57 cm 55.56 cm needed. Cutting 2” length off the nose will 1 1 1 /16" — 3 " 18 " — 20 / 8" enable a 18 1/2” nose width at 12” back, 2.70 cm 7.62 cm 51.12 cm and facilitate well for big guy Fish de- signs. My special thanks to Ben Aipa who 1 5 11 1 /2 " — 2 /8 " 12 " — 17 / 16" provided the inspiration on the overall 3.81 cm 6.68 cm 44.93 cm design of the blank and the 9’3”A.” 1 2 " — 2 /8 " 6" — 14 5 / 1 6" PAT RAWSON 5.08 cm 5.40 cm 36.35 cm

9 1 2 /16" — 1 3/4 " — 9 /2 " 6.51 cm 4.45 cm 24.13 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fun-boards/82a/ 47 (310) 225-6774 FUNBOARD 8’2”AXDesigned by

PATIntroduced: RAWSON July 2008 ROCKER THICKNESS WIDTH 5 11 Overall Bottom Length: 8’2 1/2” (250.19 cm) 6 /8 " — 1 /16" — 4 " 16.83 cm 4.29 cm 10.16 cm Tip-to-Tip Deck Length: 8’1 1/2” (247.65 cm) 3 3 1 4 /8 " — 2 /16" 6" — 12 / 2 " 11.11 cm 5.56 cm 31.75 cm Max Width: 25” (63.50 cm) 11 13 3 2 / 16" — 2 /16" 12 " — 17 / 8" 6.83 cm 7.14 cm 44.13 cm Max Thickness: 4 7/18” (11.27 cm) 8’2”a with 3/8” added thickness overall 11 3 1 /16" — 3 /8 " 18 " — 20 1 / 4" 4.29 cm 8.57 cm 52.07 cm Displacement: 3.99 ft3 (113.1 L)

7 1 " — 3 3/4 " 24 " — 22 / 16" 2.54 cm 9.53 cm 56.99 cm

1 7 /4 " — 4 5/16" 36 " — 24 / 16" 0.64 cm 10.95 cm 62.07 cm

— 4 7/16" Center — 25" 11.27 cm 63.50 cm

“Same as the 8’2”A but shimmed to 3 1 1 /16" — 4 /4 " 36 " — 24 / 16" produce 3’8” thicker. I designed the 8’2”A 0.48 cm 10.80 cm 61.12 cm to be a serious ‘big guy’ blank for either high performance, retros, or fun Gun styles. It has a performance bottom curve and enough volume for 300lbs surfers. It 11 7 /16" — 3 3/4 " 24 " — 21 /8 " should be able to yield 8’0” x 24” x 3 3/4” 1.75 cm 9.53 cm 55.56 cm with ability to position the overall rocker

1 and nose widths as needed. Cutting 2” 1 3 8 / 8" 1 /16" — 3 / " 18 " — 20 length off the nose will enable a 18 1/2” 2.70 cm 8.57 cm 51.12 cm nose width at 12” back, and facilitate 1 11 well for big guy Fish designs. My special 1 /2 " — 3" 12 " — 17 / 16" 3.81 cm 7.62 cm 44.93 cm thanks to Ben Aipa who provided the inspiration on the overall design.” 1 2 /2 " 14 5 / 1 6" 2 " — 6" — PAT RAWSON 5.08 cm 6.35 cm 36.35 cm

9 1 1 2 /16" — 2 /8 " — 9 /2 " 6.51 cm 5.40 cm 24.13 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fun-boards/82ax/ 48 (310) 225-6774 FUNBOARD 8’3”HDesigned by ROCKER THICKNESS WIDTH 1 1 ROGER HINDS 4 /8 " 1 /4" Introduced: July 2006 10.48 cm 3.18 cm Overall Bottom Length: 8’3 1/8” (251.78 cm) 5 1 3 " 1 /8" 6" 15 /8 " 7.62 cm 4.13 cm 38.42 cm Tip-to-Tip Deck Length: 8’2 5/8” (250.51 cm)

1 1 3 2 /8 " 2 /16" 12 " 18 /4 " Max Width: 23 5/8” (60.01 cm) 5.40 cm 5.24 cm 47.63 cm

7 7 3 Max Thickness: 3 3/8” (8.57 cm) 1 /16" 2 /16" 18 " 20 /4" 3.65 cm 6.19 cm 52.71 cm Displacement: 2.74 ft3 (77.6 L) 15 3 /16" 2 /4" 24 " 22" 2.38 cm 6.99 cm 55.88 cm

1 3 5 /4 " 3 /16" 36 " 23 /16" .64 cm 8.10 cm 59.21 cm

3 5 3 /8 " Center 23 /8" 8.57 cm 60.01 cm

“Designed for retro Funshapes. Based on 7 3 5 /32" 3 /16" 36 " 22 / 8" feedback from 7’11” and 8’4”H, improve- .56 cm 8.10 cm 57.47 cm ments were made in the thickness and foil. Should accommodate many rockers and ideally be hand-shaped.” ROGER HINDS 13 13 1 /16" 2 /16" 24 " 20 / 2 " 2.06 cm 7.14 cm 52.07 cm

1 7 3 1 / 4 " 2 /16" 18 " 18 /4" 3.18 cm 6.19 cm 47.63 cm

7 1 5 1 /8 " 2 /16" 12 " 16 /16" 4.76 cm 5.24 cm 41.43 cm

1 11 7 2 / 2 " 1 /16" 6" 12 /8" 6.35 cm 4.29 cm 32.70 cm

3 1 3 /16" 1 /8" 7 5/8 " 8.10 cm 2.86 cm 19.37 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fun-boards/83h/ 49 (310) 225-6774 FISH/EGG 8’4”SPDesigned by ROCKER THICKNESS WIDTH 3 CHARLIE SMITH & 4 /4 " 1 5/16" 12.07 cm 3.33 cm TOM PARRISH 13 13 3 1/4 " 1 /16" 6" 15 /16" Introduced: May 2009 8.26 cm 4.60 cm 40.16 cm Overall Bottom Length: 8’4 7/16” (255.11 cm) 5 1 1 2 /32" 2 /4" 12 " 19 /4" 5.48 cm 5.72 cm 48.90 cm Tip-to-Tip Deck Length: 8’3 13/16” (253.52 cm) 3 9 3 1 /8 " 2 /16" 18 " 21 /16" 3.49 cm 6.51 cm 53.82 cm Max Width: 24 3/16” (61.44 cm)

13 13 1 /16" 2 /16" 24 " 22 /2" Max Thickness: 3 3/8” (8.57 cm) 2.06 cm 7.14 cm 57.15 cm Displacement: 2.97 ft3 (84.0 L)

3 3 7 /16" 3 /16" 36 " 23 /8 " .48 cm 8.10 cm 60.64 cm

3 3 /8 " Center 24 1/16" 8.57 cm 61.12 cm

“This blank reflects four decades of collaboration between Charlie Smith 1 1 7 /4 " 3 /4" 36 " 22 /8 " and Tom Parrish. The 8’4” SP allows for .66 cm 58.10 cm 8.26 cm Funboard, mini-Longboard, and Noserid- er style templates. Natural Rocker is fairly neutral in both the nose and tail, with enough thickness to shape it up or down, 3 /4 " 2 7/8" 24 " 20 5/8 " according to the shaper’s preference. Ide- 1.91 cm 7.30 cm 52.39 cm al for boards in the 7’10” to 8’4” range.” TOM PARRISH 1 5 1 /8 " 2 /8" 18 " 18 13/16" 2.86 cm 6.67 cm 47.78 cm

9 1 1 1 /16" 2 /4 " 12 " 16 /2" 3.97 cm 5.72 cm 41.91 cm

1 7 2 /8 " 1 /8" 6" 13" 5.40 cm 4.76 cm 33.02 cm

13 3 1 2 /16" 1 /8" 5 /4 " 7.14cm 3.49 cm 13.34 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fish-eggs/84sp/ 50 (310) 225-6774 FISH/EGGS 8’4”SPXDesigned by ROCKER THICKNESS WIDTH 3 11 CHARLIE SMITH & 4 /4 " 1 /16" 12.07 cm 4.29 cm TOM PARRISH 1 3 13 Introduced: May 2009 3 /4 " 2 /16" 6" 15 /16" 5.56 cm 40.16 cm 8.26 cm Overall Bottom Length: 8’4 7/16” (255.11 cm) 5 5 1 2 /32" 2 /8" 12 " 19 /4" 8’3 13/16” (253.52 5.48 cm 6.67 cm 48.90 cm Tip-to-Tip Deck Length: cm) 3 1 3 1 /8 " 3 /16" 18 " 21 /16" 3.49 cm 7.78 cm 53.82 cm Max Width: 24 3/16” (61.44 cm)

13 3 /16" 3 /16" 24 " 22 1/2" Max Thickness: 3 3/4” (9.53 cm) 2.06 cm 8.10 cm 57.15 cm 8’4”SP with 3/8” added thickness overall

Displacement: 3.429 ft3 (97.1 L)

3 9 7 /16" 3 /16" 36 " 23 /8 " .48 cm 9.05 cm 60.64 cm

3 3 /4 " Center 24 1/16" 9.53 cm 61.12 cm

“This is the 3/8” thicker version of the 1 7 /4 " 3 5/8" 36 " 22 /8 " 8’4”SP. This blank reflects four decades .66 cm 9.21 cm 58.10 cm of collaboration between Charlie Smith and Tom Parrish. The 8’4” SP allows for Funboard, mini-Longboard, and Noserid- er style templates. Natural Rocker is fairly

3 1 5 neutral in both the nose and tail, with /4 " 3 /4" 24 " 20 /8 " enough thickness to shape it up or down, 1.91 cm 8.26 cm 52.39 cm according to the shaper’s preference. Ide- 1 al for boards in the 7’10” to 8’4” range.” 1 /8 " 3 " 18 " 18 13/16" 2.86 cm 7.62 cm 47.78 cm TOM PARRISH

9 5 1 1 /16" 2 /8 " 12 " 16 /2" 3.97 cm 6.67 cm 41.91 cm

1 1 2 /8 " 2 /4" 6" 13" 5.40 cm 5.72 cm 33.02 cm

13 3 1 2 /16" 1 /4" 5 /4 " 7.14cm 4.45 cm 13.34 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fish-eggs/84spx/ 51 (310) 225-6774 GUN 8’5”ADesigned by ROCKER THICKNESS WIDTH PAT RAWSON 3 1 1 Introduced: September 2006 6 /4 " 1 /4 " 3 /2 " 17.15 cm 3.18 cm 8.89 cm Overall Bottom Length: 8’6 3/8” (260.03 cm) 9 3 7 4 /16" 1 /4 " 6" 8 / 8 " 11.59 cm 4.45 cm 22.54 cm Tip-to-Tip Deck Length: 8’5 1/2” (257.81 cm)

7 3 15 2 /8 " 2 /16" 12 " 12 /16" Max Width: 22” (55.88 cm) 7.30 cm 5.56 cm 32.86 cm Max Thickness: 3 3/8” (8.57 cm) 11 11 1 /16" 2 /16" 18 " 16 " 4.29 cm 6.83 cm 40.64 cm Displacement: 2.70 ft3 (76.5 L)

1 " 3 " 24 " 18 3/8 " 2.54 cm 7.62 cm 46.67 cm

9 5 1 / 32" 3 /16" 36 " 21 /16" 0.71 cm 8.41 cm 53.50 cm

15 3 3/8 " Center 21 /16" 8.57 cm 55.72 cm

“The 8’5”A blank easily nets an 8’4” bot- tom length. The Natural Rocker is good 7 3 1 /32" 3 /16" 36 " 20 /2" for Vee in the tail and contoured bottom 0.56 cm 8.10 cm 52.07 cm designs. The Hawaii Rocker can be used for hi-performance styles.” PAT RAWSON

5 3 15 / 8 " 2 / 4 " 24 " 17 /16" 1.59 cm 6.99 cm 45.56 cm

1 1 1 " 2 /2 " 18 " 16 /8 " 2.54 cm 6.35 cm 40.96 cm

3 3 1 /8 " 2 /16" 12 " 13 11/16" 3.49 cm 5.56 cm 34.77 cm

7 9 1 / 8 " 1 13/16" 6" 10 /16" 4.76 cm 4.60 cm 26.83 cm

7 1 2 /16" 1 7/16" 6 /2 " 6.19 cm 3.65 cm 16.51 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/guns/85a/ 52 (310) 225-6774 FUNBOARD 8’6”EADesigned by THICKNESS WIDTH ERIC ARAKAWA 9 1 1 6 /16" 1 / 16" 2 /2 " Introduced: September 2006 16.67 cm 2.70 cm 6.35 cm Overall Bottom Length: 8’6” (259.08 cm) 7 9 1 4 /16" 1 / 16" 6" 11 / 2" 11.27 cm 3.97 cm 29.25 cm Tip-to-Tip Deck Length: 8’5 1/8” (257.81 cm)

7 1 1 2 /8 " 2 /16" 12 " 16 / 2 " Max Width: 24 1/16” (61.12 cm) 7.30 cm 5.24 cm 41.91 cm Max Thickness: 3 3/8” (8.57 cm) 7 1 1 1 / 8 " 2 /2 " 18 " 19 / 2 " 6.35 cm 49.53 cm 4.76 cm Displacement: 2.72 ft3 (77.0 L) 5 7 3 1 /32" 2 / 8 " 24 " 21 / 8 " 2.94 cm 7.30 cm 54.29 cm

5 5 5 /16" 3 /16" 36 " 23 /16" 0.79 cm 8.41 cm 59.21 cm

1 3 3/8 " Center 24 / 16" 8.57 cm 61.12 cm

“This blank is designed to yield big Fun- boards and big guy Guns.” 7 1 /32" 3 /8 " 36 " 23" 0.56 cm 7.94 cm 58.42 cm ERIC ARAKAWA

11 3 1 /16" 2 / 4 " 24 " 20 / 2" 1.75 cm 6.99 cm 52.07 cm

1" 2 1/2 " 18 " 18 5 / 8 " 2.54 cm 6.35 cm 47.31 cm

7 3 3 1 /16" 2 /16" 12 " 16 /16" 3.65 cm 5.56 cm 41.12 cm

31 3 11 1 /32" 1 /4 " 6" 12 / 1 6" 5.00 cm 4.45 cm 32.23 cm

5 1 1 2 /8 " 1 /4 " 7 / 8 " 6.67 cm 3.18 cm 18.10 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fun-boards/86ea/ 53 (310) 225-6774 LONGBOARDS 8’9”YDesigned by ROCKER THICKNESS WIDTH 1 5 4 /8 " 1 /16" RENNYIntroduced: YATER April 2007 10.48 cm 3.33 cm Overall Bottom Length: 8’9” (266.70 cm) 7 3 3 " 1 /8 " 6" 17 / 8" 9.05 cm 4.76 cm 44.13 cm Tip-to-Tip Deck Length: 8’8 1/2” (265.43 cm) 1 5 1 2 /8 " 2 /16" 12 " 20 / 2 " 5.40 cm 5.87 cm 52.07 cm Max Width: 24 13/16” (63.02 cm)

7 5 1 1 /16" 2 /8 " 18 " 22 / 8 " Max Thickness: 3 3/8” (8.57 cm) 3.65 cm 6.67 cm 56.20 cm Displacement: 3.25 ft3 (92.1 L) 15 13 3 /16" 2 /16" 24 " 23 /16" 2.38 cm 7.14 cm 58.90 cm

9 1 1 /32" 3 /8 " 36 " 24 / 2" 0.71 cm 7.94 cm 62.23 cm

5 3 /16" 48 " 24 13 / 1 6 " 8.41 cm 63.02 cm 3 3/8 " Center 24 11 / 1 6 " 8.57 cm 62.71 cm 5 1 3 /16" 48 " 24 / 2" 8.41 cm 62.23 cm

“This was designed with the popular 9’3”Y as the reference and intended for 5 3 7 /16" 3 /16" 36 " 23 /16" 8’6” Longboards. As compared to the 0.79 cm 8.10 cm 59.53 cm 9’3”Y it has proportionally less volume, it’s 6” shorter, 1/4” narrower, 1/8” thinner and a little wider in the tail area.” RENNY YATER 13 7 9 /16" 2 / 8 " 24 " 21 / 16 " 2.06 cm 7.30 cm 54.77 cm

1 5 1 1 /4 " 2 / 8 " 18 " 20 / 8" 3.18 cm 6.67 cm 51.12 cm

3 5 1 /4 " 2 /16" 12 " 18 " 4.45 cm 5.87 cm 45.72 cm

3 15 5 2 /8 " 1 /16" 6" 14 / 8 " 6.03 cm 5.08cm 37.15 cm

3 5 3 /16" 1 /16" 9 " 8.10 cm 3.33cm 22.86 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/longboards/89y/ 54 (310) 225-6774 LONGBOARD 8’9”YXDesigned by ROCKER THICKNESS WIDTH 1 11 RENNY YATER 4 /8 " 1 /16" Introduced: April 2007 10.48 cm 4.29 cm Overall Bottom Length: 8’9” (266.70 cm) 1 3 3 " 2 /4 " 6" 17 / 8" 9.05 cm 5.72 cm 44.13 cm Tip-to-Tip Deck Length: 8’8 1/2” (265.43 cm)

1 11 1 2 /8 " 2 /16" 12 " 20 / 2 " Max Width: 24 13/16” (63.02 cm) 5.40 cm 6.83 cm 52.07 cm

7 1 Max Thickness: 3 3/4” (9.53 cm) 1 /16" 3 " 18 " 22 / 8 " 3.65 cm 7.62 cm 56.20 cm 8’9”Y with 3/8” added thickness overall

15 3 3 3 /16" 3 /16" 24 " 23 /16" Displacement: 3.73 ft (105.7 L) 2.38 cm 8.10 cm 58.90 cm

9 1 1 /32" 3 /2 " 36 " 24 / 2" 0.71 cm 8.89 cm 62.23 cm

11 3 /16" 48 " 24 13 / 1 6 " 9.37 cm 63.02 cm 3 3/4 " Center 24 11 / 1 6 " 9.53 cm 62.71 cm 11 1 3 /16" 48 " 24 / 2" 9.37 cm 62.23 cm

“This is the 3/8” thicker version of the 8’9”Y, designed with the popular 9’3”Y as

5 9 7 the reference and intended for 8’6” Long- /16" 3 /16" 36 " 23 /16" boards. As compared to the 9’3”Y it has 0.79 cm 9.05 cm 59.53 cm proportionally less volume, it’s 6” shorter, 1/4” narrower, and a little wider in the tail area.”

13 1 9 RENNY YATER /16" 3 / 4 " 24 " 21 / 16 " 2.06 cm 8.26 cm 54.77 cm

1 1 1 /4 " 3 " 18 " 20 / 8" 3.18 cm 7.62 cm 51.12 cm

3 11 1 /4 " 2 /16" 12 " 18 " 4.45 cm 6.83 cm 45.72 cm

3 5 5 2 /8 " 2 /16" 6" 14 / 8 " 6.03 cm 5.87 cm 37.15 cm

3 11 3 /16" 1 /16" 9 " 8.10 cm 4.29 cm 22.86 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/longboards/89yx/ 55 (310) 225-6774 GUN 9’2”ADesigned by ROCKER THICKNESS WIDTH 5 5 7 /8 " 1 /16" 4 " 19.37 cm 3.33 cm 10.16 cm PATIntroduced: RAWSON September 2006

3 11 3 5 /8 " 1 /16" 6" 8 /4 " Overall Bottom Length: 9’3” (281.94 cm) 13.65 cm 4.29 cm 22.23 cm Tip-to-Tip Deck Length: 9’2” (279.40 cm) 5 3 5 3 /8 " 2 /16" 12 " 12 / 8" 9.21 cm 5.56 cm 32.07 cm Max Width: 22 1/4” (56.52 cm) 3 5 3 2 /8 " 2 /8 " 18 " 15 / 4" 6.03 cm 2.67 cm 40.01 cm Max Thickness: 3 1/2” (8.89 cm)

9 1 /16" 3 " 24 " 18" Displacement: 3.12 ft3 (88.3 L) 3.97 cm 7.62 cm 45.72 cm

1 3 /2 " 3 /8 " 36 " 21" 1.27 cm 8.57 cm 53.34 cm

1 3 1/2 " Center 22 / 4" 8.89 cm 56.52 cm

“The 9’2”A blank easily nets a 9’2” bottom length. It’s designed for classic big wave paddle-in Guns. The Natural Rocker is 3 1 /8 " 3 /8 " 36 " 20 " good for Vee in the tail and contoured 0.95 cm 7.94 cm 50.80 cm bottom designs. The Hawaii Rocker can be used for hi-performance styles.” PAT RAWSON

7 5 /8 " 2 /8 " 24 " 17 1/ 8 " 2.22 cm 6.67 cm 43.50 cm

1 3 1 1 /4 " 2 /8 " 18 " 15 / 8 " 3.18 cm 6.03 cm 38.42 cm

9 1 3 1 /16" 2 /16" 12 " 12 / 4 " 3.97 cm 5.24 cm 32.38 cm

1 11 3 2 /8 " 1 /16" 6" 9 /4 " 5.40 cm 4.29 cm 24.77 cm

3 3 2 /4 " 1 /8 " 6 " 6.99 cm 3.49 cm 15.24 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/guns/92a/ 56 (310) 225-6774 FUNBOARD 9’3”ADesigned by ROCKER THICKNESS WIDTH 11 3 4 " PAT RAWSON 7 /16" — 1 /8 " — Introduced: July 2008 10.16 cm 19.56 cm 3.49 cm 9’3 9/16” (283.37 cm) 1 11 5 Overall Bottom Length: 5 /2 " — 1 /16" 6" — 12 / 16" 13.97 cm 4.29 cm 31.27 cm Tip-to-Tip Deck Length: 9’2 5/8” (280.99 cm) 3 1 1 3 /4 " — 2 /4 " 12 " — 17 / 8 " 9.53 cm 5.72 cm 43.50 cm Max Width: 25 1/2” (64.77 cm)

1 1 2 /2 " 7 / / 4 — 2 8" 18 " — 20 " 5/16” 6.35 cm 7.30 cm 51.44 cm Max Thickness: 4 (10.95 cm)

9 7 1 3 1 /16" — 3 /16" 24 " — 22 / 4 " Displacement: 4.30 ft (121.7 L) 3.97 cm 8.73 cm 56.52 cm

1 1 /2 " — 4 " 36 " — 24 / 2" 1.27 cm 10.16 cm 62.23 cm

1 1 5 /16" — 4 /4 " 48 " — 25 / 16" 0.16 cm 10.80 cm 64.29 cm

1 — 4 5 / 16" Center — 25 / 2" 10.95 cm 64.77 cm

1 3 3 / 8 /32" — 4 / 16" 48 " — 25 " 0.24 cm 10.64 cm 63.82 cm “I designed the 9’3”A to be a very serious ‘big guy’ longer version of the 8’2”A, for either high-performance, retros or fun 7 7 /16" — 3 7/8 " 36 " — 23 / 8" Guns. Designed with a performance bot- 1.11 cm 9.84 cm 60.64 cm tom curve and enough volume for 375lbs surfers. It should be able to yield 9’ x 24.5” x 4” with ability to position the over- all rocker and nose widths as needed. 3 3 1 " — 3 /8 " 24 " — 21 / 8" Cutting 2” off the nose will enable an 18 2.54 cm 8.57 cm 54.29 cm 3/4” nose width at 12” back, and accom- 3 7 modate ‘big guy’ Fish designs. Special 1 /8 " — 3 1/16" 18 " — 19 / 16" 3.49 cm 7.78 cm 49.37 cm thanks to Ben Aipa for inspiration on this and the 8’2”A.” 7 3 15 1 /8 " — 2 / 4 " 12 " — 16 / 16" 4.76 cm 6.96 cm 43.02 cm PAT RAWSON

7 1/4 5 2 /16" — 2 " 6" — 13 /8" 5.72 cm 6.19 cm 34.61 cm

1 1 3 /16" —— 1 3/4 " 8 /2 " 7.78 cm 4.45 cm 21.59 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fun-boards/93a/ 57 (310) 225-6774 FUNBOARD 9’3”AXDesigned by ROCKER THICKNESS WIDTH 11 3 PAT RAWSON 7 /16" — 1 /4 " — 4 " Introduced: July 2008 10.16 cm 19.56 cm 4.45 cm Overall Bottom Length: 9’3 9/16” (283.37 cm) 1 1 5 5 /2 " — 2 /16" 6" — 12 / 16" 13.97 cm 5.24 cm 31.27 cm Tip-to-Tip Deck Length: 9’2 5/8” (280.99 cm) 3 5 1 3 /4 " — 2 /8 " 12 " — 17 / 8 " 9.53 cm 6.67 cm 43.50 cm Max Width: 25 1/2” (64.77 cm)

1 1 1 2 /2 " — 3 / 4" 18 " — 20 / 4 " Max Thickness: 4 11/16” (11.91 cm) 6.35 cm 8.26 cm 51.44 cm 9’3”A with 3/8” added thickness overall. 9 13 1 1 /16" — 3 /16" 24 " — 22 / 4 " 3.97 cm 9.68 cm 56.52 cm Displacement: 4.30 ft3 (121.7 L)

1 3 1 /2 " — 4 /8 " 36 " — 24 / 2" 1.27 cm 11.11 cm 62.23 cm

1 5 5 /16" — 4 /8 " 48 " — 25 / 16" 0.16 cm 11.75 cm 64.29 cm

11 1 — 4 / 16" Center — 25 / 2" 11.91 cm 64.77 cm

1 3 9 / 8 /32" — 4 / 16" 48 " — 25 " 0.24 cm 11.59 cm 63.82 cm “This is the 3/8” thicker version of the 9’3”A, designed to be a very serious ‘big guy’ longer version of the 8’2”A, for either 7 7 /16" — 4 1/4 " 36 " — 23 / 8" high-performance, retros or fun Guns. De- 1.11 cm 10.80 cm 60.64 cm signed with a performance bottom curve and enough volume for 375lbs surfers. It should be able to yield 9’ x 24.5” x 4” with ability to position the overall rocker and 3 3 1 " — 3 /4 " 24 " — 21 / 8" nose widths as needed. Cutting 2” off the 2.54 cm 9.53 cm 54.29 cm nose will enable an 18 3/4” nose width

3 7 7 at 12” back, and accommodate ‘big guy’ 1 /8 " — 3 /16" 18 " — 19 / 16" 3.49 cm 8.73 cm 49.37 cm Fish designs. Special thanks to Ben Aipa for inspiration on this and the 8’2”A.” 7 1 15 1 /8 " — 3 / 8 " 12 " — 16 / 16" PAT RAWSON 4.76 cm 7.94 cm 43.02 cm

5 7 /8 5 2 /16" — 2 " 6" — 13 /8" 6.67 cm 6.19 cm 34.61 cm

1 1 1 3 /16" —— 2 /8 " 8 /2 " 7.78 cm 5.40 cm 21.59 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/fun-boards/93ax/ 58 (310) 225-6774 LONGBOARD 9’3”YDesigned by ROCKER THICKNESS WIDTH

5 3 4 /16" 1 /8 " RENNY YATER 10.95 cm 3.49 cm Introduced: July 2006

3 1 9’3” (281.94 cm) 3 /16" 2 " 6" 17 / 2 " Overall Bottom Length: 8.10 cm 5.08 cm 44.45 cm Tip-to-Tip Deck Length: 9’2 5/8” (280.99 cm) 5 3 5 2 /16" 2 /8 " 12 " 20 /8" 5.87 cm 6.03 cm 52.39 cm Max Width: 25 1/16” (63.66 cm) 5 11 3 1 /8 " 2 /16" 18 " 22 /16" 4.13 cm 6.83 cm 56.36 cm Max Thickness: 3 1/2” (8.89 cm)

1 7 5 1 /16" 2 /8 " 24 " 23 /16" Displacement: 3.70 ft3 (104.7 L) 2.70 cm 7.30 cm 59.21 cm

3 1 9 /8 " 3 /4 " 36 " 24 /16" 0.95 cm 8.26 cm 62.39 cm

1 3 1 /16" 3 /8 " 48 " 25 /16" 0.16 cm 8.57 cm 63.66 cm

15 3 1/2 " Center 24 /16" 8.89 cm 63.34 cm

1 7 1 /16" 3 /16" 48 " 24 /2 " 0.16 cm 8.73 cm 62.23 cm “Intended for classic Longboard designs under the 9’1” range, the 9’3”Y has prov- en to be one the most popular blanks. 3 1 3 The Natural Rocker is in about the middle /8 " 3 /4 " 36 " 23 /8 " 0.95 cm 8.26 cm 59.37 cm of the demand curve. But remember, the further you change the Natural Rocker, the wider the wood stringer it needs to hold it from spingback.”

15 15 3 /16" 2 /16" 24 " 21 /8 " RENNY YATER 2.38 cm 7.46 cm 54.29 cm

5 11 7 1 /16" 2 /16" 18 " 19 /8 " 3.33 cm 6.83 cm 50.48 cm

13 3 5 1 /16" 2 /8 " 12 " 17 /8 " 4.60 cm 6.03 cm 44.77 cm

9 1 3 2 /16" 2 /16" 6" 14 /8 " 6.51 cm 5.24 cm 36.51 cm

1 7 1 3 /4 " 1 /16" 9 /4 " 8.26 cm 3.65 cm 23.50 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/longboards/93y/ 59 (310) 225-6774 LONGBOARD 9’4”BDesigned by ROCKER THICKNESS WIDTH 3 4 /4 " 1 5/16" BRUCE JONES 12.07 cm 3.33 cm Introduced: July 2006

1 11 Overall Bottom Length: 9’3 1/2” (283.21 cm) 3 /2 " 1 /16" 6" 17 " 8.89 cm 4.28 cm 43.18 cm Tip-to-Tip Deck Length: 9’3 1/16” (282.10 cm) 1 5 2 /2 " 2 " 12 " 20 /16" 6.35 cm 5.08 cm 51.59 cm Max Width: 25 1/16” (63.66 cm) 3 3 3 1 /4 " 2 /8 " 18 " 22 /16" 4.45 cm 6.03 cm 56.36 cm Max Thickness: 3 5/16” (8.41 cm)

3 5 7 3 1 /16" 2 /8" 24 " 23 /16 " Displacement: 3.42 ft (96.7 L) 3.02 cm 6.67 cm 59.53 cm

7 13 /16" 3" 36 " 24 /16" 1.11 cm 7.62 cm 63.02 cm

1 1 1 /16" 3 /4" 48 " 25 /16" .16 cm 8.26 cm 63.66 cm

5 7 3 /16" Center 24 /8 " 8.41 cm 63.18 cm

3 1 1 /32" 3 /4 " 48 " 24 /8" .24 cm 8.26 cm 61.28 cm “From the original 9’4”B plug, with thick- ness added to the tail area of the deck to make it a more shaper friendly blank. 7 5 Close tolerance for strength. Will net 24” /16" 3" 36 " 22 /8" 1.11 cm 7.62 cm 57.47 cm x 3 1/8”. Bottom rockers from the previous 9’4”B will work well with this blank.” BRUCE JONES

3 5 1 1 /32" 2 /8 " 24 " 20 /4" 2.78 cm 6.67 cm 51.44 cm

9 3 9 1 /16" 2 /8 " 18 " 18 /16" 3.97 cm 6.03 cm 47.15 cm

1 1 5 2 /8 " 2 /8" 12 " 16 /16" 5.40 cm 5.40 cm 41.43 cm

3 3 1 2 /4 " 1 /4 " 6" 13 /4 " 6.96 cm 4.45 cm 33.66 cm

1 1 1 3 /2 " 1 /2 " 7 /2" 8.89 cm 3.81 cm 19.05 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/longboards/94b/ 60 (310) 225-6774 LONGBOARD 9’5”MDesigned by ROCKER THICKNESS WI DTH

13 3 4 /16" 1 /8 " MATT YERXA 12.22 cm 3.49 cm Introduced: August 2007

7 3 5 9’4 7/16” (285.59 cm) 3 /16" 1 /4 " 6" 16 /8 " Overall Bottom Length: 8.73 cm 4.45 cm 42.23 cm Tip-to-Tip Deck Length: 9’3 3/4” (283.85 cm) 7 1 1 2 /16" 2 /16 " 12 " 20 /4 " 5.24 cm 51.44 cm 6.19 cm Max Width: 24 11/16” (62.71 cm) 3 3 1 1 /4 " 2 /8 " 18 " 22 /8 " 4.45 cm 6.03 cm 56.20 cm Max Thickness: 3 3/16” (8.10 cm)

3 5 3 1 /16" 2 /8 " 24 " 23 /16" Displacement: 3.27 ft3 (92.7 L) 3.02 cm 6.67 cm 58.90 cm

7 15 7 /16" 2 /16" 36 " 24 /16" 1.11 cm 7.46 cm 62.07 cm

1 3 11 /16" 3 /16" 48 " 24 / 1 6 " 0.16 cm 8.10 cm 62.71 cm

3 7 3 /16" Center 24 /16" 8.10 cm 62.07 cm

1 3 7 /16" 3 /16" 48 " 23 /8 " 0.16 cm 8.10 cm 60.64 cm “This is a versatile high-performance Longboard blank designed to accommo- date both machine and hand shaping. 7 7 The deck is moderately flat with a slight /16" 3 " 36 " 22 /16" 1.11 cm 7.62 cm 56.99 cm taper out toward the tail to ensure maxi- mum strength. It has slightly more volume in the nose and tail to allow more rocker to be shaped-in if desired.”

1 11 1 1 /8 " 2 /16" 24 " 20 /16" MATT YERXA 2.86 cm 6.83 cm 50.96 cm

9 7 5 1 /16" 2 /16" 18 " 18 /16" 3.97 cm 6.19 cm 46.51 cm

1 1 2 /8 " 2 /8 " 12 " 16" 5.40 cm 5.40 cm 40.64 cm

13 3 3 2 /16" 1 /4 " 6" 12 / 4" 7.14 cm 4.45 cm 32.39 cm

5 3 3 /8 " 1 /8 " 6 " 9.21 cm 3.49 cm 15.24 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/longboards/95m/ 61 (310) 225-6774 LONGBOARD 9’8”YDesigned by ROCKER THICKNESS WIDTH 1 5 4 /2 " 1 /8 " RENNY YATER 11.43 cm 4.13 cm Introduced: July 2006 5 1 5 3 /16" 2 /8 " 6" 17 /16" Overall Bottom Length: 9’8 1/8” (294.96 cm) 8.41 cm 5.40 cm 43.97 cm

3 1 3 3/4” 2 /8 " 2 /2 " 12 " 20 / 4 " Tip-to-Tip Deck Length: 9’7 (294.01 cm) 6.03 cm 6.35 cm 52.71 cm Max Width: 25 1/4” (64.14 cm) 11 13 3 1 /16" 2 /16" 18 " 22 /16" 4.29 cm 7.14 cm 56.36 cm Max Thickness: 3 5/8” (9.21 cm) 1 5 1 /8 " 3 " 24 " 23 /16" 2.86 cm 7.62 cm 59.21 cm Displacement: 4.19 ft3 (118.7 L)

7 1 5 /16" 3 /4 " 36 " 24 /8 " 1.11 cm 8.26 cm 62.55 cm

1 1 1 /16" 3 /2 " 48 " 25 /4 " 0.16 cm 8.89 cm 64.14 cm

5 3 3 /8 " Center 25 /16" 9.21 cm 63.98 cm

1 9 5 /8 " 3 /16" 48 " 24 /8 " 0.38 cm 9.05 cm 62.55 cm “Intended for classic Longboard designs under the 9’6” range. The Natural Rock- er is in about the middle of the demand curve. But remember, the further you 1 3 1 /2 " 3 /8 " 36 " 23 /2 " change the Natural Rocker curve, the 1.27 cm 8.57 cm 59.69 cm wider the wood stringer needed to hold it from springback.” RENNY YATER 1 1 1 /8 " 3 " 24 " 21 /2 " 2.86 cm 7.62 cm 54.61 cm

5 3 3 1 /8 " 2 /4 " 18 " 19 /4 " 4.13 cm 6.96 cm 50.17 cm

1 1 5 2 /8 " 2 /2 " 12 " 17 / 8 " 5.40 cm 6.35 cm 44.77 cm

3 3 1 2 /4 " 2 /16" 6" 14 /4 " 6.99 cm 5.56 cm 36.20 cm

5 1 1 3 / 8 " 1 /2 " 9 /8 " 9.21 cm 3.81 cm 23.18 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/longboards/98y/ 62 (310) 225-6774 GUN 9’9”ADesigned by ROCKER THICKNESS WIDTH 11 3 7 / 16" 1 /8 " 3 " 3.49 cm 7.62 cm PAT RAWSON 19.53 cm Introduced: September 2006 7 3 5 5 / 16" 1 /4 " 6" 8 /8 " Overall Bottom Length: 9’9 1/4” (297.82 cm) 13.81 cm 4.46 cm 21.91 cm

3 1 7 3 / 4 " 2 /8 " 12 " 12 /16" Tip-to-Tip Deck Length: 9’8 3/8” (295.59 cm) 9.53 cm 5.40 cm 31.59 cm

1 1 5 Max Width: 22 7/16” (56.99 cm) 2 /2 " 2 /2 " 18 " 15 / 16" 6.35 cm 6.35 cm 38.89 cm Max Thickness: 3 11/16” (9.37 cm) 11 15 5 1 /16" 2 /16" 24 " 17 /8 " 4.29 cm 7.46 cm 44.77 cm Displacement: 3.23 ft3 (91.5 L)

5 3 11 / 8 " 3 /8 " 36 " 20 / 16" 1.59 cm 8.57 cm 52.55 cm

5 5 3 /32" 3 /8 " 48 " 22 / 16" 0.40 cm 9.21 cm 56.36 cm

5 7 3 / 8 " Center 22 / 16" 9.21 cm 56.99 cm

1 7 3 /8 " 3 /16" 48 " 21 / 4 " 0.32 cm 8.73 cm 55.25 cm “The 9’9”A easily nets a 9’8” bottom length and is intended for big wave paddle Guns. The Natural Rocker is good for Vee in the tail and contoured bottom 1 1 1 /2 " 3 /16" 36 " 20 /16" designs. The Hawaii Rocker can be used 1.27 cm 7.78 cm 50.96 cm for hi-performance styles.” PAT RAWSON

1 5 3 1 /8 " 2 /8 " 24 " 17 / 16" 2.86 cm 6.67 cm 43.66 cm

1 5 1 1 /2 " 2 /16" 18 " 15 /4 " 3.81 cm 5.87 cm 38.74 cm

15 3 1 /16" 2 " 12 " 12 / 4" 4.92 cm 5.08 cm 32.39 cm

1 3 13 2 /2 " 1 /4 " 6" 9 /16" 6.35 cm 4.45 cm 24.92 cm

1 7 1 3 / 8 " 1 /16" 5 / 2 " 7.94 cm 3.65 cm 13.97 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/guns/99a/ 63 (310) 225-6774 GUN 9’9”AXDesigned by ROCKER THICKNESS WIDTH 11 3 7 / 16" 1 /4 " 3 " 4.43 cm 7.62 cm PAT RAWSON 19.53 cm Introduced: September 2006 7 1 5 5 / 16" 2 /8 " 6" 8 /8 " Overall Bottom Length: 9’9 1/4” (297.82 cm) 13.81 cm 5.41 cm 21.91 cm

3 1 7 3 / 4 " 2 /2" 12 " 12 /16" Tip-to-Tip Deck Length: 9’8 3/8” (295.59 cm) 9.53 cm 6.35 cm 31.59 cm

1 7 5 Max Width: 22 7/16” (56.99 cm) 2 /2 " 2 /8 " 18 " 15 / 16" 6.35 cm 7.30 cm 38.89 cm Max Thickness: 3 11/16” (9.37 cm) 11 5 5 1 /16" 3 /16" 24 " 17 /8 " 9’9”A with 3/8” added thickness overall 4.29 cm 8.41 cm 44.77 cm Displacement: 3.57 ft3 (101.4 L)

5 3 11 / 8 " 3 /4 " 36 " 20 / 16" 1.59 cm 9.52 cm 52.55 cm

5 /32" 4 " 48 " 22 3 / 16" 0.40 cm 10.16 cm 56.36 cm

7 4" Center 22 / 16" 10.16 cm 56.99 cm

1 13 3 /8 " 3 /16" 48 " 21 / 4 " 0.32 cm 9.68 cm 55.25 cm “3/8” Thicker than the 9’9”A. The 9’9”AX easily nets a 9’8” bottom length and is intended for big wave paddle Guns. The Natural Rocker is good for Vee in the 1 7 1 /2 " 3 /16" 36 " 20 /16" tail and contoured bottom designs. The 1.27 cm 8.73 cm 50.96 cm Hawaii Rocker can be used for hi-perfor- mance styles.” PAT RAWSON 1 3 1 /8 " 3 " 24 " 17 / 16" 2.86 cm 7.62 cm 43.66 cm

1 11 1 1 /2 " 2 /16" 18 " 15 /4 " 3.81 cm 6.82 cm 38.74 cm

15 3 3 1 /16" 2 /8" 12 " 12 / 4" 4.92 cm 6.03 cm 32.39 cm

1 1 13 2 /2 " 2 /8 " 6" 9 /16" 6.35 cm 5.41cm 24.92 cm

1 13 1 3 / 8 " 1 /16" 5 / 2 " 7.94 cm 4.60 cm 13.97 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/guns/99ax/ 64 (310) 225-6774 LONGBOARD 9’9”BDesigned by ROCKER THICKNESS WIDTH 7 4 /16" 1 1/4 " BRUCE JONES 11.27 cm 3.18 cm Introduced: July 2006

3 13 3 3 /8 " 1 /16" 6" 16 /8" Overall Bottom Length: 9’9 5/8” (298.77 cm) 8.57 cm 4.60 cm 41.59 cm

1 1 15 9’9 1/8” (297.50 cm) 2 /2 " 2 /4 " 12 " 19 /16" Tip-to-Tip Deck Length: 6.35 cm 5.72 cm 50.64 cm Max Width: 24 15/16” (63.34 cm) 3 11 7 1 /4 " 2 /16" 18 " 21 /8 " 4.45 cm 6.83 cm 55.56 cm Max Thickness: 3 3/4” (9.53 cm) 1 1 1 /4 " 3 " 24 " 23 /16" 3.18 cm 7.62 cm 58.58 cm Displacement: 4.022 ft3 (113.9 L)

1 1 7 /2 " 3 /2 " 36 " 24 /16" 1.27 cm 8.89 cm 62.07 cm

3 3 15 /32" 3 /4 " 48 " 24 /16" .24 cm 9.53 cm 63.34 cm

11 13 3 /16" Center 24 /16" 9.37 cm 63.02 cm

1 5 1 /8 " 3 /8 " 48 " 24 /4" .32 cm 9.21 cm 61.60 cm “Intended for Longboard shapes from 9’2” to 9’6”, this is a close tolerance blank that will net 24” x 3 1/4” maximum dimen- sions. Natural Rocker will make a nice 1 5 7 /2 " 3 /16" 36 " 22 /8" all-around Longboard shape. Rockers 1.27 cm 8.41 cm 58.10 cm from the previous 9’8” will work well with this blank.” BRUCE JONES

3 7 9 1 /16" 2 /8 " 24 " 20 /16" 3.02 cm 7.30 cm 52.23 cm

11 9 7 1 /16" 2 /16" 18 " 18 /8" 4.29 cm 6.51 cm 47.94 cm

3 1 7 2 /8 " 2 /4 " 12 " 16 /16" 6.03 cm 5.72 cm 41.75 cm

3 7 3 /16" 1 /8 " 6" 13" 8.10 cm 4.76 cm 33.02 cm

1 7 1 4 /8 " 1 /16" 7 /2 " 10.48 cm 3.65 cm 19.05 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/longboards/99b/ 65 (310) 225-6774 GUN 10’0”BGDesigned by ROCKER THICKNESS WIDTH PAT RAWSON & 7 7 /16" — 1 7/ 8 " — 5 " 18.89 cm 4.76 cm 12.70 cm ERIC ARAKAWA 5 3 1 Introduced: November 2015 5 /16" — 2 / 8 " 6" — 12 / 2 " 13.49 cm 6.03 cm 31.75 cm Overall Bottom Length: 10’1 1/2” (308.61 cm) 13 3 /16 7 " — 2 / 8 " 12 " — 17 " 9.68 cm 7.30 cm 43.18 cm Tip-to-Tip Deck Length: 10’0 3/8” (305.73 cm)

11 5 15 2 /16" — 3 / 16" 18 " — 19 / 16" 6.83 cm 8.41 cm 50.64 cm Max Width: 25 5/8” (65.09 cm)

7 5 1 /8 " — 3 /8 " 24 " — 22" 4 9/16” (11.59 cm) 4.76 cm 9.21 cm 55.88 cm Max Thickness:

Displacement: 5.265 ft3 (149.1 L)

3 3 3 /4 " — 4 /16" 36 " — 24 / 8" 1.91 cm 10.64 cm 61.91 cm

3 1 7 /16" — 4 /2 " 48 " — 25 / 16" 0.48 cm 11.43 cm 64.61 cm

1 9 — 4 / 2 " Center — 25 / 16" 11.43 cm 64.93 cm

3 5 7 /16" — 4 / 16" 48 " — 24 / 8 " 0.48 cm 10.95 cm 63.18 cm “The 10’0”BG is the longer version of the 9’3”A, and the shorter version of the 10’8”BG. It should fit nicely between both sizes for the bigger guy, thicker, gun style 9 3 /16" — 4" 36 " — 23 / 8 " shapes.” 1.43 cm 10.16 cm 59.37 cm PAT RAWSON

3 1 11 1 /16" — 3 /2 " 24 " — 20 / 16" 3.02 cm 8.89 cm 52.55 cm

1 3 13 1 /2 " — 3 /16" 18 " — 18 / 16" 3.81 cm 8.10 cm 47.78 cm

7 5 2 " — 2 / 8" 12 " — 16 / 16" 5.08 cm 7.30 cm 41.43 cm

1 9 2 /2 " 2 /16" — 6" — 13 " 6.35 cm 6.51 cm 33.02 cm

1 3 /4 " — 2 " — 8 " 8.26 cm 5.08 cm 20.32 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/guns/100bg/ 66 (310) 225-6774 LONGBOARD 10’1”CDesigned by ROCKER THICKNESS WIDTH

7 13 MATT CALVANI 4 / 16" 1 / 16" Introduced: February 2016 11.27 cm 4.60 cm 10’2” (309.88 cm) 3 5 15 Overall Bottom Length: 3 /8 " 2 /16" 6" 17 / 1 6" 8.57 cm 5.87 cm 45.56 cm Tip-to-Tip Deck Length: 10’1 3/8” (308.29 cm) 1 3 7 2 /2" 2 /4 " 12 " 20 / 8" 6.35 cm 6.99 cm 53.02 cm Max Width: 25 7/16” (64.61 cm) 13 1 7 1 /16" 3 /8 " 18 " 22 / 16" 4.60 cm 7.94 cm 56.99 cm Max Thickness: 4 1/8” (10.48 cm) 1 7 7 1 /4 3 /16" 24 23 / 16" " " 3 3.18 cm 8.73 cm 59.53 cm Displacement: 5.053 ft (143.1 L)

1 7 3 / 2 " 3 /8 " 36 " 24 / 4 " 1.27 cm 9.84 cm 62.87 cm

1 1 3 /8 " 4 /16" 48 " 25 / 8 " 0.32 cm 10.32 cm 64.45 cm

1 7 4 /8 " Center 25 /16" 10.48 cm 64.61 cm

1 1 15 /8 " 4 /16" 48 " 24 / 16" 0.32 cm 10.32 cm 63.34 cm “The 10’1”C is a shorter version of the 10’8”C, designed to net a finished thick- ness from 3-3/8” to 3-7/8” or more. I recommend the 10’2”B for thinner boards. 1 7 13 /2 " 3 /8 " 36 " 23 /16" The 10’1”C features a flat deck with a full- 1.27 cm 9.84 cm 60.48 cm er rail and wider nose and tail to accom- modate classic Longboards, Pigs, and high-performance Longboards. Despite

3 7 11 the thickness, it is designed to accommo- 1 /16" 3 /16" 24 " 21 / 16" 3.02 cm 8.73 cm 55.09 cm date broad rocker changes and will foil out nicely at the suggested thickness.” 5 3 1 1 / 8 " 3 /16" 18 " 20 / 16 " 4.13 cm 8.10 cm 50.96 cm MATT CALVANI

3 13 15 2 /16" 2 /16" 12 " 17 /16" 5.56 cm 7.14 cm 45.56 cm

13 3 13 2 /16" 2 /8 " 6" 14 / 16" 7.14 cm 6.03 cm 37.62 cm

5 3 /8 " 1 7/ 8" 9 " 9.21 cm 4.76 cm 22.86 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/longboards/101c/ 67 (310) 225-6774 LONGBOARD 10’2”BDesigned by ROCKER THICKNESS WIDTH 13 4 /16" 1 3/8 " BRUCE JONES 12.22 cm 3.49 cm Introduced: July 2006

5 7 1 3 /8 " 1 /8 " 6" 17 /2" Overall Bottom Length: 10’2 1/4” (310.52 cm) 9.21 cm 4.76 cm 44.45 cm

5 5 3 Tip-to-Tip Deck Length: 10’1 1/2” (308.61 cm) 2 /8 " 2 /16" 12 " 20 /4" 6.67 cm 5.87 cm 52.71 cm Max Width: 25 3/16” (63.98 cm) 7 11 5 1 / 8 " 2 /16" 18 " 22 /16" 4.76 cm 6.83 cm 56.67 cm Max Thickness: 3 1/2” (8.89 cm) 5 15 7 1 /16" 2 /16" 24 " 23 /16" 3.33 cm 7.46cm 59.53 cm Displacement: 4.26 ft3 (120.6 L)

9 1 5 /16" 3 /4 " 36 " 24 /8" 1.43 cm 8.26 cm 62.63 cm

5 7 3 /32" 3 /16" 48 " 25 /16" 0.40 cm 8.73 cm 63.98 cm

1 3 1/2 " Center 25 /8" 8.89 cm 63.82 cm

1 7 1 “Intended for Longboard shapes from 9’8” /16" 3 /16" 48 " 24 /2 " 0.16 cm 8.73cm 62.23 cm to 10’0”, this is a close tolerance blank to net 24” x 3-3/8” maximum dimensions. Rockers from the previous 10’1” will work well with this blank. 10’1”Y Natural Rock- 3 1 7 /8 " 3 /4 " 36 " 23 /16" er is available for this blank.” 0.95 cm 8.26 cm 59.53 cm BRUCE JONES

15 7 3 /16" 2 /8 " 24 " 21 /8" 2.38 cm 7.30 cm 54.29 cm

5 5 13 1 /16" 2 /8 " 18 " 19 /16" 3.33 cm 6.67 cm 50.32 cm

13 1 9 1 /16" 2 /4 " 12 " 17 /16" 4.60 cm 5.72 cm 44.61 cm

1 13 1 2 /2 " 1 /16" 6" 14 /4 " 6.35 cm 4.60 cm 36.20 cm

7 5 1 3 /16" 1 /16" 9 /4 " 8.73 cm 3.33 cm 23.50 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/longboards/102b/ 68 (310) 225-6774 LONGBOARD 10’2”BXDesigned by ROCKER THICKNESS WIDTH 13 4 /16" 1 5/8 " BRUCE JONES 12.22 cm 4.13 cm Introduced: July 2006

5 1 1 3 /8 " 2 /8 " 6" 17 /2" Overall Bottom Length: 10’2 1/4” (310.52 cm) 9.21 cm 5.40 cm 44.45 cm

5 9 3 2 /8 " 2 /16" 12 " 20 /4" Tip-to-Tip Deck Length: 10’1 1/2” (308.61 cm) 6.67 cm 6.51 cm 52.71 cm

7 15 5 Max Width: 25 3/16” (63.98 cm) 1 / 8 " 2 /16" 18 " 22 /16" 4.76 cm 7.47 cm 56.67 cm Max Thickness: 3 3/4” (9.53 cm) 5 3 7 1 /16" 3 /16" 24 " 23 /16" 10’2”B with 1/4” added thickness overall 3.33 cm 8.10 cm 59.53 cm Displacement: 4.61 ft3 (130.5 L)

9 1 5 /16" 3 /2 " 36 " 24 /8" 1.43 cm 8.90 cm 62.63 cm

5 11 3 /32" 3 /16" 48 " 25 /16" 0.40 cm 9.37cm 63.98 cm

3 3 /4 " Center 25 1/8" 9.53 cm 63.82 cm

1 11 1 /16" 3 /16" 48 " 24 /2 " “This is the 10’2”B with 1/4” thickness 0.16 cm 9.37cm 62.23 cm added over all. Intended for Longboard shapes from 9’8” to 10’0”, this is a close tolerance blank to net 24” x 3-3/8” maxi- mum dimensions. Rockers from the pre- 3 1 7 /8 " 3 /2 " 36 " 23 /16" 0.95 cm 8.90 cm 59.53 cm vious 10’1” will work well with this blank. 10’1”Y Natural Rocker is available for this blank.” BRUCE JONES 15 1 3 /16" 3 /8 " 24 " 21 /8" 2.38 cm 7.94 cm 54.29 cm

5 7 13 1 /16" 2 /8 " 18 " 19 /16" 3.33 cm 7.31 cm 50.32 cm

13 1 9 1 /16" 2 /2 " 12 " 17 /16" 4.60 cm 6.36 cm 44.61 cm

1 1 1 2 /2 " 2 /16" 6" 14 /4 " 6.35 cm 5.24 cm 36.20 cm

7 9 1 3 /16" 1 /16" 9 /4 " 8.73 cm 3.97 cm 23.50 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/longboards/102bx/ 69 (310) 225-6774 GUN 10’6”ADesigned by ROCKER THICKNESS WIDTH 3 8 /16 7 " " 1 /16" 4 PAT RAWSON 20.80 cm 3.65 cm 10.16 cm Introduced: September 2006

5 3 7 6 /32" 1 /4 " 6" 8 /16" Overall Bottom Length: 10’6 3/4” (321.95 cm) 15.64 cm 4.45 cm 21.43 cm

7 1 3 4 /16" 2 /8 " 12 " 12 / 8" Tip-to-Tip Deck Length: 10’5 7/8” (319.72 cm) 11.27 cm 5.40 cm 31.43 cm

1 1 3 23 3/16” (58.90 cm) 3 /8 " 2 /2 " 18 " 15 / 8" Max Width: 7.94 cm 6.35 cm 39.05 cm

3 15 Max Thickness: 3 3/4” (9.53 cm) 2 /16" 2 /16" 24 " 17 3 / 4" 5.56 cm 7.46 cm 45.09 cm Displacement: 3.77 ft3 (106.8 L)

7 1 1" 3 /16" 36 " 21 / 16" 2.54 cm 8.73cm 53.50 cm

5 3 13 /16" 3 /4 " 48 " 22 / 16" 0.79 cm 9.53 cm 57.94 cm

3 3 3 /4 " Center 23 / 16" 9.53 cm 58.90 cm

1 1 7 “The 10’6”A easily nets a 10’5” bottom /4 " 3 /2 " 48 " 21 / 8 " 0.64 cm 8.89 cm 55.56 cm length. The Natural Rocker is good for Vee in the tail and contoured bottom de- signs. The Hawaii Rocker can be used for hi-performance styles.” 3 1 13 /4 " 3 /16" 36 " 19 / 16" PAT RAWSON 1.91 cm 7.78 cm 50.32 cm

1 9 3 1 /2 " 2 /16" 24 " 16 / 4 " 3.81 cm 6.51 cm 42.55 cm

15 5 3 1 /16" 2 /16" 18 " 14 / 4 " 4.92 cm 5.87 cm 37.47 cm

3 3 2 /8 " 2 " 12 " 12 / 8" 6.03 cm 5.08 cm 31.43 cm

7 13 3 2 / 8 " 1 /16" 6" 9 /8 " 7.30 cm 4.60 cm 23.81 cm

7 1 3 /16" 1 / 2 " 6 " 8.73 cm 3.81 cm 15.24 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/guns/106a/ 70 (310) 225-6774 GUN Designed by ROCKER THICKNESS WIDTH 10’6”AX

3 15 8 /16" 1 /16" 4 " 20.80 cm 4.92 cm 10.16 cm PAT RAWSON Introduced: September 2006 5 1 7 6 /32" 2 /4 " 6" 8 /16" 15.64 cm 5.72 cm 21.43 cm Overall Bottom Length: 10’6 3/4” (321.95 cm)

7 5 3 4 /16" 2 /8 " 12 " 12 / 8" 11.27 cm 6.67 cm 31.43 cm Tip-to-Tip Deck Length: 10’5 7/8” (319.72 cm)

1 3 3 /8 " 3 " 18 " 15 / 8" Max Width: 23 3/16” (58.90 cm) 7.94 cm 7.62 cm 39.05 cm

3 7 2 /16" 3 /16" 24 " 17 3 / 4" Max Thickness: 4 1/4” (10.80 cm) 5.56 cm 8.73 cm 45.09 cm 10’6”A with 1/2” added thickness overall

Displacement: 4.37 ft3 (123.7 L)

15 1 1" 3 /16" 36 " 21 / 16" 2.54 cm 10.00cm 53.50 cm

5 1 13 /16" 4 /4 " 48 " 22 / 16" 0.79 cm 10.80 cm 57.94 cm

1 3 4 /4 " Center 23 / 16" 10.80 cm 58.90 cm

1 7 /4 " 4 " 48 " 21 / 8 " “This is the 10’6”A with 1/2” thickness 0.64 cm 10.16 cm 55.56 cm added overall. The 10’6”A easily nets a 10’5” bottom length. The Natural Rocker is good for Vee in the tail and contoured bottom designs. The Hawaii Rocker can 3 9 13 /4 " 3 /16" 36 " 19 / 16" be used for hi-performance styles.” 1.91 cm 9.05 cm 50.32 cm PAT RAWSON

1 1 3 1 /2 " 3 /16" 24 " 16 / 4 " 3.81 cm 7.78 cm 42.55 cm

15 13 3 1 /16" 2 /16" 18 " 14 / 4 " 4.92 cm 7.14 cm 37.47 cm

3 1 3 2 /8 " 2 / 2" 12 " 12 / 8" 6.03 cm 6.35 cm 31.43 cm

7 5 3 2 / 8 " 2 /16" 6" 9 /8 " 7.30 cm 5.87 cm 23.81 cm

7 3 /16" 2 " 6 " 8.73 cm 5.08 cm 15.24 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/guns/106ax/ 71 (310) 225-6774 GUN Designed by ROCKER THICKNESS WIDTH 10’8”BG 15 7 /16" — 1 15/16" — 7 " 20.16 cm 4.92 cm 17.78 cm PAT RAWSON &

7 3 9 5 /8 " — 2 / 8 " 6" — 12 / 16" 14.92 cm 6.03 cm 31.91 cm ERIC ARAKAWA Introduced: November 2013 5 4 /16" 13 3 — 2 /16" 12 " 16 / 4" 10.95 cm — 7.14 cm 42.55 cm Overall Bottom Length: 10’9 1/2” (328.93 cm)

1 1 1 3 /8 " 3 / 4" 18 — " — 19 / 2" 1/4” 7.94 cm 8.26 cm 49.53 cm Tip-to-Tip Deck Length: 10’8 (325.76 cm)

1 5 5 2 /4 " — 3 /8 " 24 " — 21 / 8" Max Width: 25 9/16” (64.93 cm) 5.72 cm 9.21 cm 54.93 cm Max Thickness: 4 9/16” (11.59 cm)

3 1 1 Displacement: 5.63 ft (159.3 L) 1 " — 4 /8 " 36 " — 24 / 8" 2.54 cm 10.48 cm 61.28 cm

3 7 /8 " — 4 /16" 48 " — 25 1 / 4 " 0.95 cm 11.27 cm 64.14 cm

9 — 4 17 / 32" Center — 25 / 16" 11.51 cm 64.93 cm

The 10’8”BG was designed and built by Eric

1 1 Arakawa & Pat Rawson. “The original plan was /4 " — 4 1 / 4 " 48 " — 24 / 2 " 0.64 cm 10.80 cm 62.23 cm to build a combo ‘Big Guy’/’Gun Blank’ ala ‘BG’, that could be offset-cut narrower for performance Guns, but have a built-in wider stock width suitable for many different options. The 9’3”A 11 7 7 /16" — 3 /8 " 36 " — 22 / 8 " was used as a conceptual starting point, and 1.75 cm 9.84 cm 58.10 cm the bottom and deck contours are fairly flat in the stringer area to enable ordering an offset cut to net a narrower version (23.5-24”) without the normal peak at the stringer that more contoured 1 3 3 1 /4 " — 3 /8 " 24 " — 20 / 16" 3.18 cm 8.57 cm 51.28 cm blanks can produce when narrowing by 2-3” The rocker is universal and the Natural Rocker 11 1 18 1 / 4 " 1 /16" — 3 /16" 18 " — should offer many design opportunities, due to 4.23 cm 46.36 cm 7.78 cm the ample thickness in the nose and tail areas. 1 3 13 2 /8 " — 2 / 4" 12 " — 15 / 16" PAT RAWSON 5.40 cm 6.99 cm 40.16 cm

3 3 1 2 /4 " — 2 /8 " 6" — 12 /2 " 6.99 cm 6.03 cm 31.75 cm

7 13 3 /16" — 2 " — 8 /16" 8.73 cm 5.08 cm 22.38 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/guns/108bg/ 72 (310) 225-6774 LONGBOARD 10’8”CDesigned by ROCKER THICKNESS WIDTH 15 13 4 / 16" 1 / 16" 12.54 cm 4.60 cm MATT CALVANI Introduced: October 2015 3 5 1 3 /4 " 2 /16" 6" 18 / 4 " 9.53 cm 5.87 cm 46.36 cm Overall Bottom Length: 10’9” (327.66 cm)

7 3 7 4 12 21 / 1 6" 2 /8 " 2 / " " Tip-to-Tip Deck Length: 10’8 1/8” (325.44 cm) 7.30 cm 6.99 cm 54.45 cm

1 1 1 2 /8 " 3 /8 " 18 " 23 / 16" Max Width: 26 9/16” (67.47 cm) 5.40 cm 7.94 cm 58.58 cm

9 7 3 1 /16" 3 /16" 24 " 24 / 16" Max Thickness: 4 5/16” (10.95 cm) 3.97cm 8.73 cm 61.44 cm Displacement: 5.76 ft3 (163.2 L)

3 7 5 / 4 " 3 /8 " 36 " 25 / 8 " 1.91 cm 9.84 cm 65.09 cm

1 3 5 /4 " 4 /16" 48 " 26 / 16" 0.64 cm 10.64 cm 66.83 cm

5 1 4 /16" Center 26 /2" 10.95 cm 67.31 cm

“The 10’8”C was designed to net a fin- 3 1 13 /16" 4 /4 " 48 " 25 / 16" ished thickness of 3-5/8” to 4” or more. I 10.80 cm 65.56 cm 0.48 cm recommend the 10’8”Y for 3-1/2” and thin- ner. The 10’8”C features a flat deck with a full rail and wider nose and tail to accom-

5 9 modate classic Longboards, Pigs, and /8 " 4 " 36 " 24 /16" 1.59 cm 10.16 cm 62.39 cm high-performance Longboards. Despite the thickness, it is designed to accommo- date broad rocker changes and will foil out nicely at the suggested thickness with 5 9 5 1 /16" 3 /16" 24 " 22 / 16" more than enough room to accommodate 9.05 cm 56.67 cm 3.33 cm a variety of bottom contours.” 3 1 3 1 / 4 " 3 /4 " 18 " 20 / 4 " MATT CALVANI 4.45cm 8.26 cm 52.71 cm

3 7 9 2 /8 " 2 /8 " 12 " 18 /16" 6.03 cm 7.30 cm 47.15 cm

7 5 3" 2 /16" 6" 15 / 16" 7.62 cm 6.19cm 38.89 cm

7 15 3 / 8" 1 /16" 10 " 9.84 cm 4.92 cm 25.40 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/longboards/108c/ 73 (310) 225-6774 LONGBOARD 10’8”YDesigned by ROCKER THICKNESS WIDTH 1 9 5 / 4 " 1 / 16" 13.34 cm 3.97 cm RENNYIntroduced: September YATER 2006 15 1 3 /16" 2 /8 " 6" 17 " 10.00 cm 5.40 cm 43.18 cm Overall Bottom Length: 10’7 7/8” (324.80 cm)

15 9 1 2 /16" 2 /16" 12 " 20 / 2 " Tip-to-Tip Deck Length: 10’7 5/16” (323.37 7.46 cm 6.51 cm 52.07 cm cm) 3 7 3 2 /16" 2 /8 " 18 " 22 / 16" 5.56 cm 7.30 cm 56.36 cm Max Width: 25 1/2” (64.77 cm) 9 1 5 1 /16" 3 /8 " 24 " 23 / 16" 3.97cm 7.94 cm 59.21 cm Max Thickness: 3 3/4” (9.53 cm)

Displacement: 4.77 ft3 (135.2 L)

11 7 11 /16" 3 /16" 36 " 24 / 16 " 1.75 cm 8.73 cm 62.71 cm

1 9 7 /4 " 3 /16" 48 " 25 / 16" 0.64 cm 9.05 cm 64.61 cm

3 1 3 /4 " Center 25 /2 " 9.53 cm 64.77 cm

“Intended for classic Longboard designs 3 5 9 /16" 3 /8 " 48 " 24 / 16 " 0.48 cm 9.21 cm 62.39 cm under the 10’6” range. The Natural Rocker in about the middle of the de- mand curve. But remember, the further you change the Natural Rocker cure, the 9 1 1 /16" 3 /2 " 36 " 23 /4 " wider the wood stringer needed to hold it 1.43 cm 8.89 cm 59.06 cm from springback.” RENNY YATER

1 1 3 1 /4 " 3 /8 " 24 " 21 / 16" 3.18 cm 7.94 cm 53.82 cm

5 7 9 1 / 8 " 2 /8 " 18 " 19 / 16" 4.13cm 7.30 cm 49.69 cm

3 1 3 2 /16" 2 /2 " 12 " 17 /8" 5.56 cm 6.35 cm 44.13 cm

13 3 3 2 /16" 2 /16" 6" 14 / 16" 7.14 cm 5.56 cm 36.04 cm

5 1 1 3 / 8" 1 /2 " 8 / 4" 9.21 cm 3.81 cm 20.96 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/longboards/108y/ 74 (310) 225-6774 SUP 10’10”TDesigned by ROCKER THICKNESS WIDTH 1 7 5 / 8 " — 1 / 8 " 13.02 cm 4.76 cm JEFF TIMPONE 1 3 1 Introduced: August 2008 4 /8 " — 2 /8 " 6" — 21 / 4 " 10.48 cm 6.03 cm 53.98 cm Overall Bottom Length: 10’9 3/8” (328.61 cm) 1 7 3 3 /8 " — 2 /8 " 12 " — 25 / 8 " 7.94 cm 7.30 cm 64.45 cm Tip-to-Tip Deck Length: 10’9” (327.66 cm)

5 1 9 2 /16" — 3 /4 " 18 " — 27 / 16" 5.87 cm 8.26 cm 70.01 cm Max Width: 32 1/16” (81.44 cm)

11 5 1 /16" — 3 /8 " 24 " — 29" Max Thickness: 5” (12.70 cm) 4.29 cm 9.21 cm 73.66 cm

Displacement: 8.31 ft3 (235.3 L)

11 5 11 /16" — 4 /16" 36 " — 30 / 16 " 1.75 cm 10.95 cm 77.95 cm

3 3 3 /16" — 4 /4 " 48 " — 31 / 4 " 0.48 cm 12.07 cm 80.65 cm

1 — 5 " Center — 32 /16" 12.70 cm 81.44 cm

“I tried to make this Stand Up blank as 1 3 1 /4 " — 4 /4 " 48 " — 31 /16 " versatile as possible. It has plenty of 0.64 cm 12.07 cm 78.90 cm width and thickness to do just about anything in a Stand Up Paddle surfboard. The rocker should also allow shapers a wide range of options.” 11 1 1 /16" — 4 /2 " 36 " — 29 / 2" 1.75 cm 11.43 cm 74.93 cm JEFF TIMPONE

5 1 5 1 /16" — 4 /16" 24 " — 26 /8" 3.33 cm 10.32 cm 67.63 cm

11 13 9 1 /16" — 3 /16" 18 " — 24 / 16" 4.29 cm 9.68 cm 62.39 cm

1 9 15 2 /16" — 3 /16" 12 " —21 / 16" 5.24 cm 9.05 cm 55.72 cm

9 1 11 2 /16" — 3 /4 " 6" — 18 / 16" 6.51 cm 8.26 cm 47.47 cm

1 11 3 / 16" — 2 / 1 6" — 13 " 7.79 cm 6.83 cm 33.02 cm

SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/sups/1010t/ 75 (310) 225-6774 LONGBOARD THICKNESS WIDTH Designed by 3 7 5 /8 " 1 /16" 11’3”D 13.65 cm 3.65 cm

1 5 4 /4 " 2 " 6" 15 / 8 " GEORGE DOWNING & 10.80 cm 5.08 cm 39.69 cm

5 7 9 DALE VELZY 3 /16" 2 /16" 12 " 19 / 1 6" 8.41 cm 6.19 cm 49.69 cm Introduced: January 1990

1 7 7 11’2 1/2” (341.63 cm) 2 /2 " 2 /8 " 18 " 21 /8 " Overall Bottom Length: 6.35 cm 7.30 cm 55.56 cm

7 1 1 Tip-to-Tip Deck Length: 11’2” (340.36 cm) 1 /8 " 3 /4 " 24 " 23 / 2 " 4.76 cm 8.26 cm 59.69 cm Max Width: 26 7/8” (68.26 cm)

Max Thickness: 4 7/32” (10.72 cm) 13 13 5 /16 " 3 /16" 36 " 25 /8 " 2.06 cm 9.68 cm 65.09 cm Displacement: 5.74 ft3 (162.7 L)

1 1 /4 " 4 1/8 " 48 " 26 / 2 " 0.64 cm 10.48 cm 67.31 cm

3 7 4 /16" Center 26 / 8" 10.64 cm 68.26 cm

“‘Shaper’s Delight’ will yield an excellently proportioned 10’6”. When finished, it will 3 1 1 /16" 4 /16" 48 " 26 /16" easily float persons up to 250lbs. An ex- 0.48 cm 10.32 cm 66.20 cm cellent rental board or family board. Nose rocker can be adjusted up to 6-1/2” or lowered 4-1/2”. Tail rocker can be adjust- 9 3 5 /16" 3 /4 " 36 " 24 / 8" ed up to 1” or down 1/2”. Perfect San On- 1.43 cm 9.53 cm 62.55 cm ofre board or for those crowded days at your favorite point break and noseriding. May be used for Guns with rocker adjust- ment and width removed from center prior 1 3 1 1 /8 " 3 /8 " 24 " 22 / 8 " to gluing. Suggested minimum stringer 2.86 cm 8.57 cm 56.20 cm thickness 3/16”.” 9 1 5 1 /16" 3 /16" 18 " 20 /16" 3.97 cm 7.78 cm 51.59 cm GEORGE DOWNING

1 11 9 2 /16 " 2 /16 " 12 " 17 / 16 " 5.24 cm 6.83 cm 44.61 cm

5 5 5 2 /8 " 2 /16" 6" 13 / 8 " 6.67 cm 5.87 cm 34.61 cm

1 5 1 3 /4 " 1 /8 " 7 /2 " 8.26cm 4.13 cm 19.05 cm SOLAIN RTHEM USA ADE USBLANKS.COM USBlanks.com USBlanks.com/catalog/longboards/113d/ 76 (310) 225-6774 GUN ROCKER THICKNESS WIDTH 3 1 8 /8 " — 1 15/16" — 6 / 2" 21.27 cm 4.92 cm 16.51 cm 11’8”BGDesigned by 1 3 6 /4 " — 2 /8 " 6" — 13 " 15.86 cm 6.03 cm 33.02 cm PAT RAWSON & 5 13 1 4 /8 " — 2 /16" 12 " — 17 / 16" 11.74 cm 7.14 cm 43.34 cm ERIC ARAKAWA 5 3 Introduced: January 2014 3 /16" — 3 / 16 " 18 " — 20 " 8.41 cm 8.10 cm 50.80 cm Overall Bottom Length: 11’9 1/4” (358.78 cm) 3 1 2 /8 " — 3 5/8 " 24 " — 22 / 16" 8.57 cm 9.21 cm 56.04 cm Tip-to-Tip Deck Length: 11’8 5/16” (356.39 cm)

1 1 5 Max Width: 26 3/8” (66.92 cm) 1 /8 " — 4 /8 " 36 " — 24 / 8" 2.86 cm 10.48 cm 62.55 cm Max Thickness: 4 3/4” (12.07 cm)

Displacement: 6.70 ft3 (189.7 L) 3 1 15 /8 " — 4 /2 " 48 " — 25 / 16 " 0.95 cm 11.43 cm 65.88 cm

3 3 — 4 / 4 " Center — 26 / 8" 12.07 cm 66.99 cm

The 11’8”BG is the big brother to the 10’8”BG and was designed and built by Eric Arakawa & Pat Rawson. “The original plan was to build a combo 7 5 3 / 8 /16 " — 4 / 8 " 48 " — 24 " ‘Big Guy’/’Gun Blank’ ala ‘BG’, that could be off- 63.18 cm 0.79 cm 11.10 cm set-cut narrower for performance Guns, but have a built-in wider stock width suitable for many differ- ent options. The 9’3”A was used as a conceptual

3 starting point, and the bottom and deck contours /4 " — 4 " 36 " — 23 " 1.91 cm 10.16 cm 58.92 cm are fairly flat in the stringer area to enable ordering an offset cut to net a narrower version (23.5-24”) without the normal peak at the stringer that more contoured blanks can produce when narrowing by 3 1 3 1 /8 " — 3 /2 " 24 " — 20 / 8 " 2-3” The rocker is universal and the Natural Rocker 3.49 cm 8.89 cm 51.75 cm should offer many design opportunities, due to the 3 3 3 ample thickness in the nose and tail areas. 1 /4 " — 3 /16 " 18 " — 18 / 8 " 46.67 cm 4.45 cm 8.10 cm PAT RAWSON 1 7 15 2 /4 " — 2 / 8 " 12 " — 15 / 16" 5.72 cm 7.30 cm 40.48 cm

1 7 2 /2 " 13 2 /8 " — 6" — 12 /16" 6.35 cm 7.30 cm 32.54 cm

9 1 3 /16" — 2 1/8 " — 8 /4 " 9.05 cm 20.96 cm SOLAIN RTHEM USA ADE 5.40 cm USBLANKS.COM USBlanks.com USBlanks.com/catalog/guns/118bg/ 77 (310) 225-6774 6’5’ EPS (updated 2/28/17)

SUPERFUSED EPS

Our proprietary bead and revolutionary molding and production techniques have allowed us to devel- op a surfboard specific product that is superior to any other EPS foam on the market today. Our Su- perfused EPS technology allows us to achieve superior bead fusion, consistency and quality. Combined with our progressive mold designs, we have taken epoxy board building to a whole new level.

Unlike most other EPS manufacturers, our blanks are shape molded under extreme pressure. This allows for superior penetration and bead fusion during the molding process that cannot be achieved in ROCKER THICKNESS WIDTH

block molding. Combined with our proprietary bead and industry leading production techniques, our 1 3 1 5 /2 " 1 /8 " 3 / 4" process generates fusion characteristics that simply cannot be achieved through other methods. The 13.97 cm 3.49 cm 8.26 cm tight fusion means the foam is considerably more air tight and water tight than any of its predecessors 3 5 1 3 /8 " 1 /8 " 6" 9 /2 " thus eliminating the need for taping or spackling before machining, or spackling / seal coating before 8.57 cm 4.13 cm 24.13 cm glassing. As a result it glasses up lighter and stronger as it absorbs less resin but maintains a superior

7 9 mechanical bond due to its incredible surface properties. 1 /8 " 2 " 12 " 13 /16" 4.76 cm 5.08 cm 34.45 cm Our shape molded blanks result in less work for the shaper as our outlines, rockers, and crowned decks 5 1 1 " 2 /16" 18 " 16 / 2" allow the craftsman to zero in on the finished shape much more quickly and easily. Our molding capa- 2.54 cm 5.87 cm 41.91 cm bilities also allow us to produce each blank size in different thicknesses which means you can chose the

7 1 1 blank that best suits your shape while cutting down on shaping time and waste. /16" 2 /2 " 24 " 18 / 2" 1.11 cm 6.51 cm 46.99 cm Due to the incredible strength and memory characteristics of EPS foam many shapers have experi- enced “spring back” problems in the past when applying forced rocker adjustments to this particular type of foam. By not applying any post induced surface tensions we have eliminated these known “spring back” problems. We accomplish this by starting with an excellent rocker along with increased

volume in the nose and tail areas allowing the shaper to accommodate proprietary custom rocker con- 3 1 2 /4 " Center 20 / 2" figurations without having to make physical adjustments during the glue up process. 6.99 cm 52.07 cm

Another extremely important aspect of shape molding is the fact that it cuts down on waste and all EPS scraps are 100% recyclable. Please do your part and check with your local city to see if they offer a recycling program which you can participate in.

5 5 /16" 2 /8 " 24 " — 18 7/ 8" All sizes are offered in both 1.5 pcf and 2.0 pcf densities. Combined with our variable thickness capa- 0.79 cm 6.67 cm 47.94 cm bilities, US Blanks SUPERFUSED EPS has quickly become the most user friendly, versatile, industry 5 3 leading EPS on the market, and has set a new standard world wide. /8 " 2 /8 " 18 " — 17 1 / 4" 0.79 cm 6.03 cm 43.82 cm

1 1 1 /16" 2 /8 " 12 " — 15" 2.7 cm 5.40 cm 38.1 cm

5 3 7 1 /8 " 1 /4 " 6" — 11 / 8" 4.13 cm 4.45 cm 30.16 cm

3 3 3 2 /8 " 1 /8 " — 6 / 4 " 6.03 cm 3.50 cm 17.15 cm

USBlanks.com/catalog/superfused-eps/

USBlanks.com 78 (310) 225-6774 6’5’ EPS (updated 2/28/17) SUPERFUSED 6’5”EPSDesigned by ERIC ARAKAWA Introduced: October 2007 ROCKER THICKNESS WIDTH Overall Bottom Length: 6’5 13/16” (197.64 cm)

1 1 2 3 / 4" 5 / " 1 /8 " 3 Tip-to-Tip Deck Length: 6’4 13/16” (195.10 cm) 13.97 cm 3.49 cm 8.26 cm

Max Width: 20 3/8” (51.75 cm) 3 5 1 3 /8 " 1 /8 " 6" 9 /2 " 8.57 cm 4.13 cm 24.13 cm Max Thickness: 2 3/4” (6.99 cm)

7 9 1 /8 " 2 " 12 " 13 /16" 4.76 cm 5.08 cm 34.45 cm Available Densities: 1.5 PCF & 2.0 PCF

5 1 1 " 2 /16" 18 " 16 / 2" 2.54 cm 5.87 cm 41.91 cm

7 1 1 /16" 2 /2 " 24 " 18 / 2" 1.11 cm 6.51 cm 46.99 cm

3 1 2 /4 " Center 20 / 2" 6.99 cm 52.07 cm

5 5 “This blank is designed for high-per- /16" 2 /8 " 24 " — 18 7/ 8" 0.79 cm 6.67 cm 47.94 cm formance Shortboards up to 20-1/4” in width. At 2-3/4” thick, it remains versatile

5 3 and will accept subtle rocker adjustments /8 " 2 /8 " 18 " — 17 1 / 4" 0.79 cm 6.03 cm 43.82 cm from center.” ERIC ARAKAWA 1 1 1 /16" 2 /8 " 12 " — 15" 2.7 cm 5.40 cm 38.1 cm

5 3 7 1 /8 " 1 /4 " 6" — 11 / 8" 4.13 cm 4.45 cm 30.16 cm

3 3 3 2 /8 " 1 /8 " — 6 / 4 " 6.03 cm 3.50 cm 17.15 cm

USBlanks.com USBlanks.com/catalog/superfused/65superfusedeps/ 79 (310) 225-6774 6’5’ X EPS (updated 2/28/17) SUPERFUSED 6’5”X EPSDesigned by ERIC ARAKAWA Introduced: October 2007 Overall Bottom Length: 6’5 13/16” (197.64 cm) ROCKER THICKNESS WIDTH 13/16” 1 5 1 Tip-to-Tip Deck Length: 6’4 (195.10 cm) 5 /2 " 1 /8 " 3 / 4" 13.97 cm 4.13 cm 8.26 cm Max Width: 20 3/8” (51.75 cm)

3 7 1 3 /8 " 1 /8 " 6" 9 /2 " 8.57 cm 4.76 cm 24.13 cm Max Thickness: 3” (7.62 cm)

7 1 9 Available Densities: 1.5 PCF & 2.0 PCF 1 /8 " 2 /4 " 12 " 13 /16" 4.76 cm 5.72 cm 34.45 cm

9 1 1 " 2 /16" 18 " 16 / 2" 2.54 cm 6.51 cm 41.91 cm

7 3 1 /16" 2 /4 " 24 " 18 / 2" 1.11 cm 6.99 cm 46.99 cm

1 3" Center 20 / 2" 7.62 cm 52.07 cm

5 7 “ At 3” max thickness, this blank is /16" 2 /8 " 24 " — 18 7/ 8" 0.79 cm 7.30 cm 47.94 cm identical to the previous version with 1/4” additional thickness along the entire

5 5 length. Designed for high-performance /8 " 2 /8 " 18 " — 17 1 / 4" 0.79 cm 6.67 cm 43.82 cm Shortboards up to 20-1/4” in width, and will also accommodate small Fish models

1 3 due to the extra thickness. An ideal blank 1 /16" 2 /8 " 12 " — 15" 2.7 cm 6.03 cm 38.1 cm for machine shaping.” ERIC ARAKAWA 5 7 1 /8 " 2 " 6" — 11 / 8" 4.13 cm 5.08 cm 30.16 cm

3 5 3 2 /8 " 1 /8 " — 6 / 4 " 6.03 cm 4.13 cm 17.15 cm

USBlanks.com USBlanks.com/catalog/superfused/65xsuperfusedeps/ 80 (310) 225-6774 SUPERFUSED 6’8”EPSDesigned by ERIC ARAKAWA Introduced: February 2008 ROCKER THICKNESS WIDTH Overall Bottom Length: 6’9” (205.74 cm) 3 15 1 5 /8 " /16" 4 / 2 " 13.65 cm 2.38 cm 11.43 cm Tip-to-Tip Deck Length: 6’8” (203.20 cm)

7/16” 5 5 1 3 /16" 1 /16" 6" 10 / 2 " Max Width: 21 (54.45 cm) 8.41 cm 3.33 cm 26.67 cm Max Thickness: 2 7/8” (7.30 cm) 7 13 9 1 /8 " 1 /16" 12 " 14 /16" 4.76 cm 4.60 cm 36.99 cm Available Densities: 1.5 PCF & 2.0 PCF

1 1 1 " 2 /4 " 18 " 17 / 2" 2.54 cm 5.72 cm 44.45 cm

1 1 3 /2 " 2 /2 " 24 " 19 / 8" 1.27 cm 6.35 cm 49.21 cm

1 13 3 /16" 2 /16" 36 " 21 / 8" 0.16 cm 7.14 cm 54.29 cm

7 1 2 /8 " Center 21 /2 " 7.32 cm 54.61 cm

1 13 3 /32" 2 /16" 36 " 21 /8 " 0.08 cm 7.14 cm 54.29 cm

“Designed for versatility to accommodate 3 9 5 /8 " 2 /16" 24 " 19 / 8" a wide range of board styles from Fishes 0.95 cm 6.50 cm 49.85 cm to Big Guy Shortboards. The manufac- turing process ensures uniform density 3 5 7 /4 " 2 /16" 18 " 17 /8 " and fusion throughout, thus allowing the 1.91 cm 5.87 cm 45.40 cm shaper to use the maximum width of the blank if necessary. A close tolerance ver- 3 7 1 1 /32" 1 /8 " 12 " 15 / 2" sion to yield a quick shape and generate 2.78 cm 4.76 cm 39.37 cm less waste.” ERIC ARAKAWA 11 3 1 1 /16" 1 /8 " 6" 12 / 4" 4.29 cm 3.49 cm 31.12 cm

3 3 2 /8 " 1 " 6 /4 " 6.03 cm 2.54 cm 17.15 cm

USBlanks.com USBlanks.com/catalog/superfused/68superfusedeps/ 81 (310) 225-6774 SUPERFUSED 6’8”X EPSDesigned by ERIC ARAKAWA Introduced: April 2007 ROCKER THICKNESS WIDTH Overall Bottom Length: 6’9” (205.74 cm)

3 1 1 5 /8 " 1 /4 " 4 / 2" 13.65 cm 3.18 cm 11.43 cm Tip-to-Tip Deck Length: 6’8” (203.20 cm)

7/16” 5 5 1 Max Width: 21 (54.45 cm) 3 /16" 1 /8" 6" 10 / 2 " 8.41 cm 4.13 cm 26.67 cm Max Thickness: 3 1/4” (8.57 cm)

7 3 9 1 /8 " 2 /16" 12 " 14 /16" 4.76 cm 5.56 cm 36.99 cm Available Densities: 1.5 PCF & 2.0 PCF

9 1 1 " 2 /16" 18 " 17 / 2" 2.54 cm 6.51 cm 44.45 cm

1 7 3 /2 " 2 /8 " 24 " 19 / 8" 1.27 cm 7.30 cm 49.21 cm

1 3 3 /16" 3 /16" 36 " 21 / 8" 0.16 cm 8.10 cm 54.29 cm

1 1 3 /4 " Center 21 /2 " 8.26 cm 54.61 cm

1 3 3 /32" 3 /16" 36 " 21 /8 " 0.08 cm 8.10 cm 54.29 cm

“The ‘X’ is the maximum volume version of the 6’8” Superfused EPS. Designed for 3 7 5 /8 " 2 /8 " 24 " 19 / 8" versatility to accommodate a wide range 0.95 cm 7.30 cm 49.85 cm of board styles from Fishes to Big Guy Shortboards. The manufacturing pro- 3 5 7 /4 " 2 /8 " 18 " 17 /8 " cess ensures uniform density and fusion 1.91 cm 6.67 cm 45.40 cm throughout, thus allowing the shaper to use the maximum width of the blank if 3 1 1 1 /32" 2 /4 " 12 " 15 / 2" necessary. A close tolerance version to 2.78 cm 5.72 cm 39.37 cm yield a quick shape and generate less waste.” 11 13 1 1 /16" 1 /16" 6" 12 / 4" 4.29 cm 4.60 cm 31.12 cm ERIC ARAKAWA

3 3 3 2 /8 " 1 /8 " 6 /4 " 6.03 cm 3.49 cm 17.15 cm

USBlanks.com USBlanks.com/catalog/superfused/68xsuperfusedeps/ 82 (310) 225-6774 SUPERFUSED 7’2”EPSDesigned by ERIC ARAKAWA ROCKER THICKNESS WIDTH Introduced: October 2008 13 3/4” 5 /16" 1" 2 3/4 " Overall Bottom Length: 7’2 (220.35 cm) 14.76 cm 2.54 cm 6.99 cm Tip-to-Tip Deck Length: 7’1 3/4” (217.81 cm) 1 5 5 3 /2 " 1 /16" 6" 9 /8 " 8.89 cm 3.33 cm 24.45 cm Max Width: 21 9/16” (54.77 cm)

1 7 3 2 /16" 1 /8 " 12 " 13 / 4" Max Thickness: 2 15/16” (7.46 cm) 5.24 cm 4.76 cm 34.93 cm Available Densities: 1.5 PCF & 2.0 PCF 1 1 3 1 /8 " 2 / 4 " 18 " 16 / 4" 2.86 cm 5.72 cm 42.55 cm

9 9 13 /16" 2 /16" 24 " 18 / 16 " 1.43 cm 6.51 cm 47.78 cm

1 7 1 /16" 2 /8 " 36 " 21 / 8" 0.16 cm 7.30 cm 53.66 cm

15 9 2 /16" Center 21 / 16" 7.46 cm 54.77 cm

1 7 1 /16" 2 /8 " 36 " 21 /4 " 0.16 cm 7.30 cm 53.98 cm

“Designed for high-performance semi- Guns. The added volume in the nose and 1 9 1 /2 " 2 /16" 24 " 19 / 4" tail will accommodate a wide variety of 1.27 cm 6.51 cm 48.90 cm rockers.” ERIC ARAKAWA 13 3 5 /16" 2 /16" 18 " 17 / 16" 2.06 cm 5.56 cm 43.97 cm

1 1 13 1 /4 " 2 /8 " 12 " 14 / 16 " 3.18 cm 5.40 cm 37.62 cm

15 9 5 1 /16" 1 /16" 6" 11 /16" 4.92 cm 3.97 cm 28.73 cm

7 1 1 2 /8 " 1 /8 " 5 / 4" 7.30 cm 2.86 cm 13.34 cm

USBlanks.com USBlanks.com/catalog/superfused/72superfusedeps/ 83 (310) 225-6774 SUPERFUSED 7’2”X EPSDesigned by ERIC ARAKAWA ROCKER THICKNESS WIDTH Introduced: June 2007 13 3/4” 5 /16" 3 3 1 /8 " 2 /4 " Overall Bottom Length: 7’2 (220.35 cm) 14.76 cm 3.49 cm 6.99 cm Tip-to-Tip Deck Length: 7’1 3/4” (217.81 cm) 1 11 5 3 /2 " 1 /16" 6" 9 /8 " 8.89 cm 4.29 cm 24.45 cm Max Width: 21 9/16” (54.77 cm)

1 1 3 2 /16" 2 /4 " 12 " 13 / 4" Max Thickness: 3 5/16” (8.41 cm) 5.24 cm 5.72 cm 34.93 cm Available Densities: 1.5 PCF & 2.0 PCF 1 5 3 1 /8 " 2 / 8" 18 " 16 / 4" 2.86 cm 6.67 cm 42.55 cm

9 15 13 /16" 2 /16" 24 " 18 / 16 " 1.43 cm 7.46 cm 47.78 cm

1 1 1 /16" 3 /4 " 36 " 21 / 8" 0.16 cm 8.26 cm 53.66 cm

5 3 /16" Center 21 9 / 16" 8.41 cm 54.77 cm

1 1 1 /16" 3 /4 " 36 " 21 /4 " 0.16 cm 8.26 cm 53.98 cm

“This ‘X’ version is the maximum volume version of the 7’2” Superfused EPS. De- 1 13 1 /2 " 2 /16" 24 " 19 / 4" signed for high-performance semi-Guns. 1.27 cm 7.14 cm 48.90 cm The added volume in the nose and tail will accommodate a wide variety of rockers.” 13 9 5 /16" 2 /16" 18 " 17 / 16" ERIC ARAKAWA 2.06 cm 6.51 cm 43.97 cm

1 1 13 1 /4 " 2 /2 " 12 " 14 / 16 " 3.18 cm 6.35 cm 37.62 cm

15 15 5 1 /16" 1 /16" 6" 11 /16" 4.92 cm 4.92 cm 28.73 cm

7 1 1 2 /8 " 1 /2 " 5 / 4" 7.30 cm 3.81 cm 13.34 cm

USBlanks.com USBlanks.com/catalog/superfused/72xsuperfusedeps/ 84 (310) 225-6774 SUPERFUSED 7’8”EPSDesigned by ROCKER THICKNESS WIDTH 9 1 5 /16" 1 1/16" 4 /2 " ERIC ARAKAWA 14.13 cm 2.70 cm 11.43 cm Introduced: March 2009

11 1 1 Overall Bottom Length: 7’9” (236.22 cm) 3 /16" 1 /2 " 6" 11 /16" 9.37 cm 3.81 cm 28.10 cm Tip-to-Tip Deck Length: 7’7 7/8” (233.36 cm)

3 1 7 2 /16" 2 /16" 12 " 15 / 16" 1/4” 5.57 cm 5.24 cm 39.21 cm Max Width: 23 (59.06 cm)

1/4 1 7 Max Thickness: 3 ” (8.26 cm) 1 /4 " 2 /16" 18 " 18 1 / 2 " 3.18 cm 6.19 cm 46.99 cm Available Densities: 1.5 PCF & 2.0 PCF

11 13 9 /16" 2 /16" 24 " 20 /16" 1.75 cm 7.14 cm 52.23 cm

1 3 13 /8 " 3 /16" 36 " 22 /16" 0.32 cm 8.10 cm 57.94 cm

7 3 1/4 " Center 23 / 16" 8.26 cm 59.53cm

1 1 7 /8 " 3 /8 " 36 " 22 / 8" 0.32 cm 7.94 cm 58.10 cm “This is a multi-purpose blank which can be used for Funboards, big-guy boards and Guns. The extra volume will accom- modate a wide variety of rocker configu- 1 3 5 /2 " 2 /4 " 24 " 20 / 8" rations.” 1.27 cm 6.99 cm 52.39 cm ERIC ARAKAWA

13 1 5 /16" 2 /2 " 18 " 18 / 8" 2.06 cm 6.35 cm 47.31 cm

1 3 15 1 /4 " 2 /16" 12 " 15 /16" 3.18 cm 5.56 cm 40.48cm

7 3 3 1 /8 " 1 /4 " 6" 12 / 16" 4.76 cm 4.45 cm 30.96 cm

9 3 2 /16" 1 /8 " 6 " 6.51 cm 3.49 cm 15.24 cm

USBlanks.com USBlanks.com/catalog/superfused/78superfusedeps/ 85 (310) 225-6774 SUPERFUSED 7’8”X EPSDesigned by ROCKER THICKNESS WIDTH 9 1 ERIC ARAKAWA 5 /16" 7 4 /2 " 1 /16" June 2007 14.13 cm 11.43 cm Introduced: 3.65 cm Overall Bottom Length: 7’9” (236.22 cm) 11 7 1 3 /16" 1 /8 " 6" 11 /16" 9.37 cm 4.76 cm 28.10 cm Tip-to-Tip Deck Length: 7’7 7/8” (233.36 cm)

3 7 7 1/4” 2 /16" 2 /16" 12 " 15 / 16" Max Width: 23 (59.06 cm) 5.57 cm 6.19 cm 39.21 cm Max Thickness: 3 5/8” (9.21 cm) 1 13 1 1 /4 " 2 /16" 18 " 18 / 2 " 3.18 cm 7.14 cm 46.99 cm Available Densities: 1.5 PCF & 2.0 PCF

11 3 9 /16" 3 /16" 24 " 20 /16" 1.75 cm 8.10 cm 52.23 cm

1 9 13 /8 " 3 /16" 36 " 22 /16" 0.32 cm 9.05 cm 57.94 cm

5 7 3 /8 " Center 23 / 16" 9.21 cm 59.53cm

1 1 7 /8 " 3 /2 " 36 " 22 / 8" 0.32 cm 8.89 cm 58.10 cm “This is a multi-purpose blank which can be used for Funboards, big-guy boards and Guns. The extra volume will accom- modate a wide variety of rocker configu- 1 1 5 /2 " 3 /8 " 24 " 20 / 8" rations.” 1.27 cm 7.94 cm 52.39 cm ERIC ARAKAWA

13 7 5 /16" 2 /8 " 18 " 18 / 8" 2.06 cm 7.30 cm 47.31 cm

1 9 15 1 /4 " 2 /16" 12 " 15 /16" 3.18 cm 6.51 cm 40.48cm

7 1 3 1 /8 " 2 /8 " 6" 12 / 16" 4.76 cm 5.40 cm 30.96 cm

9 3 2 /16" 1 /4 " 6 " 6.51 cm 4.45 cm 15.24 cm

USBlanks.com USBlanks.com/catalog/superfused/78xsuperfusedeps/ 86 (310) 225-6774 SUPERFUSED 8’8”EPSDesigned by RENNY YATER Introduced: March 2009 Overall Bottom Length: 8’7 7/8” (263.84 cm) ROCKER THICKNESS WIDTH 1 1 Tip-to-Tip Deck Length: 8’7” (261.62 cm) 4 /4 " 1 /4 " 7 " 10.80 cm 3.18 cm 17.78 cm 1/4” 3 3 13 Max Width: 25 (64.14 cm) 3 /16" 1 / 4 " 6" 17 /16" 8.10 cm 4.45 cm 45.24 cm Max Thickness: 3 3/16” (8.10 cm) 3 1 1 2 /16" 2 / 4 " 12 " 21 /16" 5.72 cm 53.50 cm 5.56 cm Available Densities: 1.5 PCF & 2.0 PCF 1 5 3 1 /2 " 2 / 8 " 18 " 22 / 4 " 3.81 cm 6.67 cm 57.79 cm

15 7 3 /16" 2 / 8 " 24 " 23 / 4 " 2.38 cm 7.30 cm 60.33 cm

1 1 /4 " 3 /8 " 36 " 25 " 0.64 cm 7.94 cm 63.50 cm

3 3/16" 48 " 25 3/8 " 64.45 cm 3 3/16" Center 25 1/4 " 8.10 cm 64.14 cm 3 3 / 16" 48 " 25 3/16" 63.98 cm

1 1 3 /8 " 3 /8 " 36 " 24 /8 " 0.32 cm 7.94 cm 61.91 cm “This blank is a scaled down version of the 9’8” Superfused EPS. The goal was to design an EPS mold plug that would accommodate any Longboard shape 1 7 3 /2 " 2 /8 " 24 " 22 /8 " program in the 7’10” to 8’6” range for 1.27 cm 7.30 cm 56.83 cm machine cutting purposes. After analyzing 13 5 3 /16" 2 /8 " 18 " 20 /4 " our rocker template database we came 2.06 cm 6.67 cm 52.71 cm up with a ‘middle of the road’ rocker pro- 5 5 1 file and added thickness to the nose and 1 /16" 2 /16" 12 " 18 /2 " 3.33 cm 5.87 cm 46.99 cm tail to allow for straight to extreme rocker

15 7 1 profiles. The plan shape and width have 1 /16" 1 /8 " 6" 15 /4 " 4.92 cm 4.76 cm 38.74 cm also been maximized This blank is offered in 2 thicknesses to accommodate both 1 3 1 2 /8 " 1 /8 " 10 /4 " machine shaping and hand shaping.” 5.40 cm 3.43 cm 26.04 cm RENNY YATER

USBlanks.com USBlanks.com/catalog/superfused/88superfusedeps/ 87 (310) 225-6774 SUPERFUSED 8’8”X EPSDesigned by RENNY YATER Introduced: December 2014 Overall Bottom Length: 8’7 7/8” (263.84 cm) ROCKER THICKNESS WIDTH

1 5 4 /4 " 1 /8 " 7 " Tip-to-Tip Deck Length: 8’7” (261.62 cm) 10.80 cm 4.13 cm 17.78 cm 1/4” 3 1 13 Max Width: 25 (64.14 cm) 3 /16" 2 / 8 " 6" 17 /16" 8.10 cm 5.40 cm 45.24 cm Max Thickness: 3 9/16” (9.05 cm) 3 5 1 2 /16" 2 / 8 " 12 " 21 /16" 5.56 cm 6.67 cm 53.50 cm Available Densities: 1.5 PCF & 2.0 PCF 1 3 1 /2 " 3 " 18 " 22 / 4 " 3.81 cm 7.62 cm 57.79 cm

15 1 3 /16" 3 / 4 " 24 " 23 / 4 " 2.38 cm 8.26 cm 60.33 cm

1 1 /4 " 3 /2 " 36 " 25 " 0.64 cm 8.89 cm 63.50 cm

48 " 25 3/8 " 64.45 cm 1 3 9/16" Center 25 /4 " 9.05 cm 64.14 cm 48 " 25 3/16" 63.98 cm

1 1 3 /8 " 3 /2 " 36 " 24 /8 " 0.32 cm 8.89 cm 61.91 cm “The maximum volume version of the 8’8”. This blank is a scaled down version of the 9’8” Superfused EPS. The goal was to design an EPS mold plug that would 1 1 3 /2 " 3 /4" 24 " 22 /8 " 1.27 cm 8.26 cm 56.83 cm accommodate any Longboard shape program in the 7’10” to 8’6” range for 13 3 /16" 3 " 18 " 20 /4 " machine cutting purposes. After analyzing 7.62 cm 52.71 cm 2.06 cm our rocker template database we came 5 11 1 1 /16" 2 /16" 12 " 18 /2 " up with a ‘middle of the road’ rocker pro- 3.33 cm 6.83 cm 46.99 cm file and added thickness to the nose and

15 1 1 tail to allow for straight to extreme rocker 1 /16" 2 /4 " 6" 15 /4 " 4.92 cm 5.72 cm 38.74 cm profiles. The plan shape and width have also been maximized This blank is offered 1 3 1 2 /8 " 1 /4 " 10 /4 " 5.40 cm 4.45 cm 26.04 cm in 2 thicknesses to accommodate both machine shaping and hand shaping.” RENNY YATER

USBlanks.com USBlanks.com/catalog/superfused/88xsuperfusedeps/ 88 (310) 225-6774 SUPERFUSED 9’8”EPSDesigned by RENNY YATER ROCKER THICKNESS WIDTH Introduced: December 2007 9 1 4 /16" 1 3/8 " 7 /2 " Overall Bottom Length: 9’8” (274.32 cm) 11.59 cm 3.49 cm 19.05 cm

7 11 1 1/4” 3 /16" 1 /16" 6" 17 / 4" Tip-to-Tip Deck Length: 9’7 (274.96 cm) 8.73 cm 4.29 cm 43.82 cm 1/4” 9 1 3 Max Width: 25 (64.14 cm) 2 /16" 2 /16" 12 " 20 / 4" 6.51 cm 5.24 cm 52.71 cm Max Thickness: 3” (7.62 cm) 13 3 1 1 /16" 2 /8 " 18 " 22 / 2 " 4.60 cm 6.03 cm 57.15 cm Available Densities: 1.5 PCF & 2.0 PCF 3 5 5 1 /16" 2 / 8 " 24 " 23 /8 " 3.02 cm 6.67 cm 60.01cm

1 13 7 /2 " 2 /16" 36 " 24 / 8" 1.27 cm 7.14 cm 63.18 cm

1 /16" 3 " 48 " 25 3 / 8" 0.16 cm 7.62 cm 64.45 cm

5 3 " Center 25 / 16" 7.62 cm 64.29 cm

3 /32" 3 " 48 " 25" 0.24 cm 7.62 cm 63.50cm

“This blank is the result of input by several 7 people within the surfboard manfacturing /16" 2 13/16" 36 " 24" 1.11 cm 7.14 cm 60.94 cm industry. The goal was to design an EPS mold plug that would accommodate any Longboard shape program in the 8’10” to 9’6” range for machine cutting purposes. 1 9 7 1 /16" 2 /16" 24 " 21 /8 " After analyzing all the rocker templates 2.70 cm 6.51 cm 55.56 cm in our database we came up with a ‘mid- 9 3 1 1 /16" 2 /8 " 18 " 20 /4 " dle of the road’ rocker profile and added 3.97 cm 6.03 cm 51.44 cm thickness to the nose and tail to allow for

1 1 straight to extreme rocker profiles. The 2 /4 " 2 /16" 12 " 18 " 5.72 cm 5.24 cm 45.72 cm plan shape and width have also been max-

7 imized. This blank is offered in 3 different 3/4" 14 /8 " 3 " 1 6" thicknesses to accommodate for both 7.62 cm 4.45 cm 37.78 cm machine shaping and hand shaping. This 4 " 1 1/4" 10 " is the minimum volume version.” 10.16 cm 3.18 cm 25.40 cm RENNY YATER

USBlanks.com USBlanks.com/catalog/superfused/98superfusedeps/ 89 (310) 225-6774 SUPERFUSED 9’8”X EPSDesigned by RENNY YATER ROCKER THICKNESS WIDTH Introduced: December 2007 9 1 4 /16" 1 3/4 " 7 /2 " Overall Bottom Length: 9’8” (274.32 cm) 11.59 cm 4.46 cm 19.05 cm

7 1 1 1/4” 3 /16" 2 /16" 6" 17 / 4" Tip-to-Tip Deck Length: 9’7 (274.96 cm) 8.73 cm 5.24 cm 43.82 cm 1/4” 9 7 3 Max Width: 25 (64.14 cm) 2 /16" 2 /16" 12 " 20 / 4" 6.51 cm 6.19 cm 52.71 cm Max Thickness: 3 3/8” (8.57 cm) 13 3 1 1 /16" 2 /4 " 18 " 22 / 2 " 4.60 cm 6.99 cm 57.15 cm Available Densities: 1.5 PCF & 2.0 PCF 3 5 1 /16" 3 " 24 " 23 /8 " 3.02 cm 7.62 cm 60.01cm

1 3 7 /2 " 3 /16" 36 " 24 / 8" 1.27 cm 8.10 cm 63.18 cm

1 3 /16" 3 /8 " 48 " 25 3 / 8" 0.16 cm 8.57 cm 64.45 cm

5 3 3/8 " Center 25 / 16" 8.57 cm 64.29 cm

3 3 /32" 3 /8 " 48 " 25" 0.24 cm 8.57 cm 63.50cm

“This blank is the result of input by several 7 /16" 3 3/16" 36 " 24" people within the surfboard manfacturing 1.11 cm 8.10 cm 60.94 cm industry. The goal was to design an EPS mold plug that would accommodate any Longboard shape program in the 8’10” to

1 3 7 9’6” range for machine cutting purposes. 1 /16" 3 /16" 24 " 21 /8 " 2.70 cm 7.46 cm 55.56 cm After analyzing all the rocker templates in our database we came up with a ‘mid- 9 3 1 1 /16" 2 /4 " 18 " 20 /4 " dle of the road’ rocker profile and added 6.99 cm 51.44 cm 3.97 cm thickness to the nose and tail to allow for 1 7 2 /4 " 2 /16" 12 " 18 " straight to extreme rocker profiles. The 5.72 cm 6.19 cm 45.72 cm plan shape and width have also been 1 7 maximized. This blank is offered in 3 3 " 2 /8" 6" 14 /8 " 7.62 cm 5.40 cm 37.78 cm different thicknesses to accommodate for both machine shaping and hand shaping. 4 " 1 5/8" 10 " 10.16 cm 4.13 cm 25.40 cm This is the medium volume version.” RENNY YATER

USBlanks.com USBlanks.com/catalog/superfused/98xsuperfusedeps/ 90 (310) 225-6774 SUPERFUSED 9’8”XXEPSDesigned by RENNY YATER ROCKER THICKNESS WIDTH Introduced: December 2007 9 1 4 /16" 1 7 /2 " 2 /8 " 9’8” (274.32 cm) 11.59 cm 5.40 cm 19.05 cm Overall Bottom Length:

7 7 1 3 /16" 2 /16" 6" 17 / 4" Tip-to-Tip Deck Length: 9’7 1/4” (274.96 cm) 8.73 cm 6.19 cm 43.82 cm

9 13 3 1/4” 2 /16" 2 /16" 12 " 20 / 4" Max Width: 25 (64.14 cm) 6.51 cm 7.14 cm 52.71 cm 3/4” 13 1 1 Max Thickness: 3 (9.53 cm) 1 /16" 3 /8 " 18 " 22 / 2 " 4.60 cm 7.94 cm 57.15 cm

3 3 5 Available Densities: 1.5 PCF & 2.0 PCF 1 /16" 3 / 8" 24 " 23 /8 " 3.02 cm 8.57 cm 60.01cm

1 9 7 /2 " 3 /16" 36 " 24 / 8" 1.27 cm 9.05 cm 63.18 cm

1 3 /16" 3 /4" 48 " 25 3 / 8" 0.16 cm 9.53 cm 64.45 cm

5 3 3/4 " Center 25 / 16" 9.53 cm 64.29 cm

3 3 /32" 3 /4 " 48 " 25" 0.24 cm 9.53 cm 63.50cm

“This blank is the result of input by sever-

7 9 al people within the surfboard manfactur- /16" 3 /16" 36 " 24" 1.11 cm 9.05 cm 60.94 cm ing industry. The goal was to design an EPS mold plug that would accommodate any Longboard shape program in the 8’10” to 9’6” range for machine cutting 1 5 7 1 /16" 3 /16" 24 " 21 /8 " purposes. After analyzing all the rocker 2.70 cm 8.41 cm 55.56 cm templates in our database we came up 9 1 1 with a ‘middle of the road’ rocker profile 1 /16" 3 /8 " 18 " 20 /4 " 3.97 cm 7.94 cm 51.44 cm and added thickness to the nose and tail

13 to allow for straight to extreme rock- 1 2 /16" 12 " 18 " 2 /4 " er profiles. The plan shape and width 5.72 cm 7.14 cm 45.72 cm have also been maximized. This blank 7 1 6 14 /8 " 3 " 2 /2" " is offered in 3 different thicknesses to 37.78 cm 7.62 cm 6.35 cm accommodate for both machine shaping 4 " 2 " 10 " and hand shaping. This is the maximum 10.16 cm 5.08 cm 25.40 cm volume version.” RENNY YATER

USBlanks.com USBlanks.com/catalog/superfused/98xxsuperfusedeps/ 91 (310) 225-6774 BLOCK-CUT EPS Manufactured from White Hot Surfboard Foam billets and available in 1.5 pcf or 2.0 pcf density. Every PU blank in this catalog is also available as Block-Cut EPS. Custom cut blanks are also avail- able. Below is a list of the blanks that we stock. BLANK GENRE - DESIGNER STANDARD LENGTH WIDTH NOSE TAIL CENTER NOSE TAIL STRINGER ROCKER ROCKER THICK. THICK. THICK. 6’0”P Shortboard - Patterson Ply 73.00 20.06 4.63 1.69 2.38 0.88 1.06

6’2"A Fish - Rawson Ply 74.25 23.50 4.75 1.81 3.15 1.35 1.45

6’3"RS Shortboard - Rusty Ply 75.00 21.00 4.87 2.00 2.62 1.25 1.37

6'3"RSX Shortboard - Rusty Ply 75.00 21.00 4.87 2.00 2.90 1.50 1.65

6'3"WH Shortboard - Rusty Ply 75.75 20.60 5.60 1.73 2.75 1.40 1.50

6'3"WHX Shortboard - Rusty Ply 75.75 20.60 5.60 1.73 3.15 1.75 1.87

6’5"A Fish - Rawson Ply 77.25 23.50 5.25 1.81 3.35 1.13 1.38

6’8"WH Shortboard - Rusty Ply 79.00 21.75 5.25 2.34 2.88 1.15 1.25

6'8"WHX Shortboard - Rusty Ply 79.00 21.75 5.25 2.34 3.50 1.75 1.85

6’9"RS Shortboard - Rusty Ply 81.00 22.00 5.81 2.40 2.87 1.75 1.25

6'9"RSX Shortboard - Rusty Ply 81.00 22.00 5.81 2.40 3.18 1.50 1.50

6’10"A Fish - Rawson Ply 81.67 24.13 5.19 2.00 3.50 1.38 1.65

7’3”A Fish - Rawson 1/8” Bass 87.04 24.11 5.50 2.13 3.63 1.38 1.50

7’5"A Shortboard - Rawson 1/8” Bass 87.96 22.06 6.13 2.19 3.00 0.88 1.38

8’1”EA Shortboard - Arakawa 1/8” Bass 96.05 24.14 6.44 2.57 3.44 1.00 1.32

9’2”A Gun - Rawson 1/8” Bass 110.40 22.46 7.57 2.75 3.57 1.39 1.28

9’3"Y Longboard - Yater 1/8” Bass 111.30 24.50 4.38 3.50 3.25 1.73 1.41

9’4"B Longboard - Jones 1/8” Bass 111.44 24.50 4.88 3.63 3.25 0.90 1.32

9’8"Y Longboard - Yater 1/8” Bass 116.40 24.50 4.50 3.69 3.63 1.45 1.55

9’9"A Gun - Rawson 1/8” Bass 116.90 22.50 7.75 3.25 3.69 1.38 1.44

10’2”B Longboard - Jones 1/8” Bass 122.22 24.50 4.82 3.82 3.73 1.27 1.58

9’6"A SUP 1/8” Bass 114.00 32.00 5.25 4.25 4.93 2.25 1.25

10’0" SUP 1/8” Bass 120.00 32.00 5.50 4.31 4.93 2.25 1.31

10’4"A SUP 1/8” Bass 124.00 32.00 4.56 3.75 4.88 2.06 1.81

10'4"B SUP 1/8” Bass 124.00 32.00 6.25 4.38 4.81 2.31 1.69

11’2"A SUP 1/8” Bass 134.00 32.00 5.25 4.19 5.00 1.86 1.86

11'2"B SUP 1/8” Bass 134.00 32.00 6.75 4.75 5.06 2.50 1.81

12’1” SUP 1/8” Bass 145.00 32.00 6.13 3.38 5.19 2.56 2.50

12’6"A SUP 1/8” Bass 150.00 32.00 6.31 3.50 5.50 2.86 2.75

USBlanks.com USBlanks.com/catalog/block-cut-eps/ 92 (310) 225-6774 BLOCK-CUT 9’6”EPS THICKNESS WIDTH A-SUP 1 1 5 /4 " 2 / 4 " 32 " 13.35 cm 5.72 cm 81.28cm Introduced: January 2011 Overall Bottom Length: 9’6 5/8” (291.15 cm) 5 2 /16" 3 1 / 2 " 12 " 5.87 cm 8.89 cm Tip-to-Tip Deck Length: 9’6” (289.56 cm)

Max Width: 32” (81.28 cm)

1 1 1 /16" 4 /4 " 24 " Max Thickness: 4 15/16” (12.54 cm) 2.70 cm 10.80 cm Available Densities: 1.5 PCF & 2.0 PCF

3 11 /8 " 4 /16" 36 " 0.95 cm 11.91 cm

4 7/8 " 48 " 12.38 cm

15 4 /16" Center 32 " 12.54 cm 81.28 cm

4 7/8 " 48 " 12.38 cm

1 5 /16" 4 /8 " 36 " 0.16 cm 11.75 cm

1 1 1 /16" 4 /16" 24 " 2.70 cm 10.32 cm

1 1 2 /16" 3 /8 " 12 " 5.24 cm 7.94 cm

1 1 4 /4 " 1 /4 " 32" 10.80 cm 3.18 cm 81.28 cm

USBlanks.com USBlanks.com/catalog/sups/96eps/ 93 (310) 225-6774 BLOCK-CUT 10’0”EPS ROCKER THICKNESS WIDTH 1 1 A-SUP 5 /2 " 2 / 4 " 32 " 13.97 cm 5.72 cm 81.28 cm

Introduced: January 2011 Overall Bottom Length: 10’0 3/4” (306.71 cm) 5 2 /8 " 3 7 / 16" 12 " 6.67 cm 8.73 cm Tip-to-Tip Deck Length: 10’0” (304.8 cm)

Max Width: 32” (81.28 cm) 1 3 1 /4 " 4 /16" 24 " 3.18 cm 10.64 cm Max Thickness: 4 15/16” (12.54 cm)

Available Densities: 1.5 PCF & 2.0 PCF

1 5 /2 " 4 /8 " 36 " 1.27 cm 11.75 cm

1 13 /8 " 4 /16" 48 " 0.32 cm 12.22 cm

4 15/16" Center 32 " 12.54 cm 81.28 cm

1 3 /8 " 4 /4 " 48 " 0.32 cm 12.07 cm

5 7 /8 " 4 /16" 36 " 1.59 cm 11.27 cm

7 13 1 /16" 3 /16" 24 " 3.65 cm 9.68 cm

9 7 2 /16" 2 /8 " 12 " 6.51 cm 7.30 cm

5 5 4 /16" 1 /16" 32" 10.95 cm 3.33 cm 81.28 cm

USBlanks.com USBlanks.com/catalog/sups/100sup/ 94 (310) 225-6774 BLOCK-CUT 10’4”EPS THICKNESS WIDTH 9 1 4 /16" 2 / 16" 32 " 11.59 cm 5.24 cm 81.28 cm A-SUP

Introduced: August 2009

1 3 2 /8 " 3 / 8 " 12 " Overall Bottom Length: 10’5 1/4” (318.14 cm) 5.40 cm 8.57 cm

Tip-to-Tip Deck Length: 10’4” (314.96 cm)

15 1 /16" 4 /8 " 24 " Max Width: 32” (81.28 cm) 2.38 cm 10.48 cm Max Thickness: 4 7/8” (12.38 cm)

Available Densities: 1.5 PCF & 2.0 PCF 5 9 /16" 4 /16" 36 " 0.79 cm 11.59 cm

4 3/4 " 48 " 12.07 cm

4 7/8 " Center 32 " 12.38 cm 81.28 cm

1 5 /4 " 4 /8 " 48 " 0.64 cm 11.75 cm

5 3 / 8 " 4 /8 " 36 " 1.59 cm 11.11 cm

1 15 1 /4 " 3 /16" 24 " 3.18 cm 10.00 cm

3 1 2 /16" 3 /4 " 12 " 5.56 cm 8.26 cm

3 13 3 /4 " 1 /16" 32" 9.53 cm 4.60 cm 81.28 cm

USBlanks.com USBlanks.com/catalog/sups/104supa/ 95 (310) 225-6774 BLOCK-CUT 10’4”EPS ROCKER THICKNESS WIDTH 1 5 B-SUP 6 /4 " 2 /16" 32 " 15.88 cm 5.87 cm 81.28 cm

Introduced: August 2009 Overall Bottom Length: 10’5 1/4” (318.14 cm) 1 5 3 /16" 3 /16" 12 " 7.78 cm 8.41 cm Tip-to-Tip Deck Length: 10’4” (314.96 cm)

Max Width: 32” (81.28 cm) 1 15 1 /2 " 3 /16" 24 " 3.81 cm 10.00 cm Max Thickness: 4 13/16” (12.22 cm)

Available Densities: 1.5 PCF & 2.0 PCF

5 7 /8 " 4 /16" 36 " 1.59 cm 11.27 cm

3 11 /16" 4 /16" 48 " 0.48 cm 11.91 cm

4 13/16" Center 32 " 12.22 cm 81.28 cm

3 3 /16" 4 /4 " 48 " 0.48 cm 12.07 cm

11 1 /16" 4 /2 " 36 " 1.75 cm 11.43 cm

1 15 1 /2 " 3 /16" 24 " 3.81 cm 10.00 cm

11 1 2 /16" 3 / 8 " 12 " 6.83 cm 7.94 cm

3 11 4 /8 " 1 / 16" 32" 11.11 cm 4.29 cm 81.28 cm

USBlanks.com USBlanks.com/catalog/sups/104supb/ 96 (310) 225-6774 BLOCK-CUT ROCKER THICKNESS WIDTH 1 7 11’2”EPS 5 /4 " 1 /8 " 32 " 13.34cm 4.76 cm 81.28 cm A-SUP

1 3 2 /2 " 3 /8 " 12 " Introduced: August 2009 6.35 cm 8.57 cm Overall Bottom Length: 11’3 1/2” (344.17 cm)

Tip-to-Tip Deck Length: 11’2” (340.36 cm) 1 3 1 /4 " 4 /16" 24 " 3.18 cm 10.64 cm Max Width: 32” (81.28 cm)

Max Thickness: 5” (12.7 cm) 9 5 /16" 4 /8 " 36 " 1.43 cm 11.75 cm Available Densities: 1.5 PCF & 2.0 PCF

1 7 /8 " 4 /8 " 48 " 0.32 cm 12.38 cm

5" Center 32 " 12.70 cm 81.28 cm

1 13 /4 " 4 /16" 48 " 0.64 cm 12.22 cm

5 9 /8 " 4 /16" 36 " 1.59 cm 11.59 cm

1 1 1 /4 " 4 /8 " 24 " 3.18 cm 10.48 cm

1 3 2 /4 " 3 / 8 " 12 " 5.72 cm 8.57 cm

3 7 4 /16" 1 / 8 " 32" 10.64 cm 4.76 cm 81.28 cm

USBlanks.com USBlanks.com/catalog/sups/112supa/ 97 (310) 225-6774 BLOCK-CUT ROCKER THICKNESS WIDTH 3 1 6 /4 " 2 /2 " 32 " 11’2”EPS 17.15 cm 6.35 cm 81.28 cm B-SUP

7 7 3 /16" 3 /16" 12 " August 2009 8.73 cm 8.73 cm Introduced: Overall Bottom Length: 11’3 1/2” (344.17 cm)

7 1 Tip-to-Tip Deck Length: 11’2” (340.36 cm) 1 /8 " 4 /8 " 24 " 4.76 cm 10.48 cm Max Width: 32” (81.28 cm)

Max Thickness: 5 1/16” (12.86 cm) 7 9 /8 " 4 /16" 36 " 2.22 cm 11.59 cm Available Densities: 1.5 PCF & 2.0 PCF

5 7 /16" 4 /8 " 48 " 0.79 cm 12.38 cm

5 1/16" Center 32 " 12.86 cm 81.28 cm

5 15 /16" 4 /16" 48 " 0.79 cm 12.54 cm

7 9 /8 " 4 /16" 36 " 2.22 cm 11.59 cm

3 1 1 /4 " 4 /16" 24 " 4.45 cm 10.32 cm

3 " 3 1 / 4 " 12 " 6.83 cm 8.26 cm

3 13 4 /4 " 1 / 16" 32" 12.07 cm 4.60 cm 81.28 cm

USBlanks.com USBlanks.com/catalog/sups/112supb/ 98 (310) 225-6774 1 9 BLOCK-CUT 6 /8 " 2 /16" 32 " 15.56 cm 6.51 cm 81.28 cm 12’1”EPS

3 3 /16" 3 5/8 " 12 " 7.94 cm 9.21cm SUP

Introduced: August 2009 3 5 1 / 4 " 4 /16" 24 " 1/8” 4.29 cm 10.95 cm Overall Bottom Length: 12’2 (371.16 cm)

Tip-to-Tip Deck Length: 12’1” (368.3 cm)

7 /8 " 4 3/4 " 36 " Max Width: 32” (81.28 cm) 2.22 cm 12.07 cm Max Thickness: 5 3/16” (13.18 cm)

1.5 PCF & 2.0 PCF 5 Available Densities: /16" 5 " 48 " 0.79 cm 12.70 cm

5 3/16" Center 32 " 13.18 cm 81.28 cm

1 /4 " 5 " 48 " 0.64 cm 12.70 cm

9 3 /16" 4 /4 " 36 " 1.43 cm 12.07 cm

1 5 1 /16" 4 /16" 24 " 2.70 cm 10.95 cm

7 5 1 /8 " 3 / 8 " 12 " 4.76 cm 9.21 cm

3 1 3 /8 " 2 / 2 " 32" 8.57 cm 6.35 cm 81.28 cm USBlanks.com USBlanks.com/catalog/sups/121sup/ 99 (310) 225-6774 5 7 6 /16" 2 /8 " 32 " BLOCK-CUT 7.30 cm 16.03 cm 81.28 12’6”EPScm 5 3 /16" 3 15/16" 12 " 8.41 cm 10.00cm SUP

13 5 Introduced: January 2011 1 / 16" 4 /8 " 24 " 4.60 cm 11.75 cm Overall Bottom Length: 12’7 1/2” (384.81 cm)

Tip-to-Tip Deck Length: 12’6” (381.0 cm) 15 /16" 5 1/16" 36 " 2.38 cm 12.86 cm Max Width: 32” (81.28 cm)

Max Thickness: 5 1/2” (13.97 cm)

3 /8 " 5 3/8 " 48 " Available Densities: 1.5 PCF & 2.0 PCF 0.95 cm 13.65 cm

5 1/2 " Center 32 " 13.97 cm 81.28 cm

5 3 /16" 5 /8 " 48 " 0.79 cm 13.65 cm

5 1 /8 " 5 /16" 36 " 1.59 cm 12.86 cm

3 5 1 /16" 4 /8 " 24 " 3.02 cm 11.75 cm

2 " 3 15 / 16" 12 " 5.08 cm 10.00 cm

1 3 3 /2 " 2 / 4 " 32" 8.89 cm 6.96cm 81.28 cm USBlanks.com USBlanks.com/catalog/sups/126sup/ 100 (310) 225-6774 PARABOLIC STRINGERS

The parabolic template outlines depicted on the following pages are drawn to scale and are represen- tative of the curvature positioning related to the given blank sizes. All templates are named based on their overall length from end to end. When ordering please specify the specific template to be used based on the finished board length. Any short board template can be used in any blank as long as the template is smaller than the blank itself (this does not apply to fish templates).

For example, you can request to use the 6’0” parabolic template in the 6’6” EA blank. As a general rule the maximum length template that can be used in a blank will be one size smaller than the blank itself (eg. 6’0” template in the 6’2” P or the 6’4” template in the 6’6” EA, etc.) We will only use the same length template in a blank when specifically requested by a customer. All templates can also be used in our SUPERFUSED EPS blanks.

Our “stock” parabolic templates can be adjusted in or out in the tail to accommodate a narrower or wider outline. Be aware that all dimensions from nose to tail will be affected when making this ad- justment. Upon request customers may also submit “custom” templates to be kept as private outlines. Custom template set up will be subject to a one-time surcharge.

The most common stringer thicknesses in parabolic blanks are 3/32”, 1/8” and 4mm ply (5/32”). The allowed maximum stringer thickness used for the 5’11” Fish and 6’4” Fish outlines is 3/32”.

We suggest using the natural rocker in all parabolic blanks whenever possible. Parabolic stringers do not react to (or hold) rocker adjustments in the same manner as when adjusted from a center stringer. For this reason we will not guarantee precise tolerances when making custom rocker adjustments in parabolic blanks.

USBlanks.com/catalog/parabolic-stringers/

USBlanks.com 101 (310) 225-6774 PARABOLIC 5’9”PDesigned by TIMMY PATTERSON

Overall Template Length: 5’8” (172.72 cm)

Blank Width: 19 1/16” (48.42 cm) 9 " (1/2” narrower than standard 5’9”P) 22.86 cm Notes: This template is suitable for high-per- formance Shortboard shapes 5’8” and under.

* * All parabolic dimensions are “inside widths” measured across from cut to cut. Extra width must be added to the dimensions listed to account for thickness of stringers. Overall blank 13 1 / 4 " 33.66 cm width is narrower due to the thickness of mate- rial removed during the cutting process.

14 5 / 8 " 5’8” 37.15 cm 172.72 cm

14 1 / 4 " 36.20 cm

11 3 / 8 " 28.90 cm

4 " 10.16 cm

USBlanks.com USBlanks.com/catalog/parabolic-stringers/59pparabolic/ 102 (310) 225-6774 PARABOLIC 6’0”PDesigned by TIMMY PATTERSON

Overall Template Length: 5’10” (177.80 cm)

Blank Width: 19 9/16” (49.69 cm) 9 5/8 " 24.45 cm (1/2” narrower than standard 6’0”P)

Notes: This template is suitable for high-per- formance Shortboard shapes 5’10” and under.

* * All parabolic dimensions are “inside widths” measured across from cut to cut. Extra width must be added to the dimensions listed to 14 1/2 " account for thickness of stringers. Overall blank 36.83 cm width is narrower due to the thickness of mate- rial removed during the cutting process.

15 5/8 " 5’10” 39.69 cm 177.8 cm

15 3/8 " 39.05 cm

12 1/4 " 31.12 cm

4 1/4" 10.80 cm

USBlanks.com USBlanks.com/catalog/parabolic-stringers/60pparabolic/ 103 (310) 225-6774 PARABOLIC 6’2”ADesigned by PAT RAWSON 3 9 /8" 23.81 cm

3 Overall Template Length: 5’11” (180.34 cm) 13 /8" 33.97 cm Blank Width: 23 1/8” (58.74 cm) (1/2” narrower than standard 6’2”A)

Notes: This template is suitable for high-per- formance Fish shapes 5’11” and under.

9 Maximum stringer thickness allowed = 3/32” 16 /16" 42.07 cm * * All parabolic dimensions are “inside widths” measured across from cut to cut. Extra width must be added to the dimensions listed to account for thickness of stringers. Overall blank width is narrower due to the thickness of mate- rial removed during the cutting process. 15 16 /16" 5’11” 43.02 cm 180.34 cm

3 15 /4" 40.01 cm

9 12 /16" 31.91 cm

13 9 /16" 24.92 cm

1 5 /4" 13.34 cm

USBlanks.com USBlanks.com/catalog/parabolic-stringers/62aparabolic/ 104 (310) 225-6774 PARABOLIC 6’2”PDesigned by TIMMY PATTERSON

Overall Template Length: 6’0” (182.88 cm)

3 Blank Width: 20 1/8” (51.12 cm) 9 /4 " 24.77 cm (1/2” narrower than standard 6’2”P)

Notes: This template is suitable for high-per- formance Shortboard shapes 6’0” and under.

* * All parabolic dimensions are “inside widths” measured across from cut to cut. Extra width 3 must be added to the dimensions listed to 14 /8 " 36.51 cm account for thickness of stringers. Overall blank width is narrower due to the thickness of mate- rial removed during the cutting process.

7 15 /8 " 6’0” 40.32 cm 182.88 cm

3 15 /8 " 39.05 cm

1 12 /4 " 31.12 cm

5 4 /8" 11.75cm

USBlanks.com USBlanks.com/catalog/parabolic-stringers/62pparabolic/ 105 (310) 225-6774 PARABOLIC 6’3”EADesigned by ERIC ARAKAWA

Overall Template Length: 6’2” (187.96 cm)

3 Blank Width: 20 5/16” (51.59 cm) 9 /8 " 23.81 cm (1/2” narrower than standard 6’3”EA)

Notes: This template is suitable for high-per- formance Shortboard shapes 6’2” and under.

* * All parabolic dimensions are “inside widths” measured across from cut to cut. Extra width 7 13 /8 " must be added to the dimensions listed to 35.24 cm account for thickness of stringers. Overall blank width is narrower due to the thickness of mate- rial removed during the cutting process.

7 15 /8 " 6’2” 40.32cm 187.96 cm

1 15 /4 " 38.74 cm

1 12 /8 " 30.80 cm

9 4 /16"

11.56 cm

USBlanks.com USBlanks.com/catalog/parabolic-stringers/63eaparabolic/ 106 (310) 225-6774 PARABOLIC 6’5”ADesigned by PAT RAWSON

1 8 /16" 20.48 cm

Overall Template Length: 6’4” (193.04 cm) 12 " 30.48 cm Blank Width: 23 1/8” (58.74 cm) (1/2” narrower than standard 6’5”A)

Notes: This template is suitable for high-per- formance Fish shapes 6’4” and under.

Maximum stringer thickness allowed = 3/32” 16" 40.64 cm * * All parabolic dimensions are “inside widths” measured across from cut to cut. Extra width must be added to the dimensions listed to account for thickness of stringers. Overall blank width is narrower due to the thickness of mate- rial removed during the cutting process.

5 17 /16" 6’4” 43.97 cm 193.04 cm

16" 40.64 cm

3 12 /4 " 32.39 cm

3 10 /16" 25.88 cm

11 6 /16" 16.99 cm

USBlanks.com USBlanks.com/catalog/parabolic-stringers/65aparabolic/ 107 (310) 225-6774 PARABOLIC 6’6”EADesigned by ERIC ARAKAWA

Overall Template Length: 6’4” (193.04 cm)

Blank Width: 20 15/16” (53.18 cm) 9" (1/2” narrower than standard 6’6”EA) 22.86 cm

Notes: This template is suitable for high-per- formance Shortboard shapes 6’4” and under.

* * All parabolic dimensions are “inside widths” measured across from cut to cut. Extra width 7 13 /16" must be added to the dimensions listed to 34.13 cm account for thickness of stringers. Overall blank width is narrower due to the thickness of mate- rial removed during the cutting process.

11 15 /16" 6’4” 39.85 cm 193.04 cm

15 " 38.10 cm

3 11 /8 " 28.89 cm

3 4 /8 " 11.11 cm

USBlanks.com USBlanks.com/catalog/parabolic-stringers/66eaparabolic/ 108 (310) 225-6774 PARABOLIC 6’7”PDesigned by TIMMY PATTERSON

Overall Template Length: 6’6” (198.12 cm) 3 8 /4 " 22.22 cm Blank Width: 21” (53.34 cm) (1/2” narrower than standard 6’7”P)

Notes: This template is suitable for high-per- formance Shortboard shapes 6’6” and under.

5 * * All parabolic dimensions are “inside widths” 13 /16" 33.81 cm measured across from cut to cut. Extra width must be added to the dimensions listed to account for thickness of stringers. Overall blank width is narrower due to the thickness of mate- rial removed during the cutting process.

7 15 /8 " 6’6” 40.32 cm 198.12 cm

3 15 /16" 38.58 cm

12" 30.48 cm

1 4 /8 " 10.48 cm

USBlanks.com USBlanks.com/catalog/parabolic-stringers/67pparabolic/ 109 (310) 225-6774 PARABOLIC 6’9”EADesigned by ERIC ARAKAWA

Overall Template Length: 6’8” (203.20 cm) 15 8 /16" 22.70 cm Blank Width: 20 13/16” (49.69 cm) (1/2” narrower than standard 6’9”EA)

Notes: This template is suitable for high-per- formance Shortboard shapes 6’8” and under.

9 13 /16" * * All parabolic dimensions are “inside widths” 34.45 cm measured across from cut to cut. Extra width must be added to the dimensions listed to account for thickness of stringers. Overall blank width is narrower due to the thickness of mate- rial removed during the cutting process.

1 16 /8 " 6’8” 40.96 cm 203.20 cm

13 14 /16" 37.63 cm

15 10 /16" 27.78 cm

1 3 /4" 8.26 cm

USBlanks.com USBlanks.com/catalog/parabolic-stringers/69eaparabolic/ 110 (310) 225-6774 PARABOLIC 7’1”EADesigned by ERIC ARAKAWA

3 8 /4" Overall Template Length: 7’0” (213.36 cm) 22.23 cm Blank Width: 22 3/16” (57.63 cm) (1/2” narrower than standard 7’1”EA)

Notes: This template is suitable for high-per- formance Shortboard shapes 7’0” and under. 1 13 /2" 34.29 cm * * All parabolic dimensions are “inside widths” measured across from cut to cut. Extra width must be added to the dimensions listed to account for thickness of stringers. Overall blank width is narrower due to the thickness of mate- rial removed during the cutting process. 3 15 /4 " 40.01 cm

3 16 /16" 7’0” 41.12 cm 213.36 cm

3 16 /16" 41.12 cm

3 14 /4" 37.47 cm

1 11 /4" 28.58 cm

3 4 /4" 12.07 cm

USBlanks.com USBlanks.com/catalog/parabolic-stringers/71eaparabolic/ 111 (310) 225-6774 PARABOLIC 9’4”BDesigned by Outline “A” Outline “B” BRUCE JONES 6" 8" 15.24 cm 20.32 cm

Overall Template Length: 9’4” (284.48 cm)

1 14 /4 " 16" Blank Width: 24 11/16” (62.71 cm) 36.20 cm 40.64 cm (1/2” narrower than standard 9’4”B)

Notes: This template is suitable for high-per- formance Shortboard shapes 9’4” and under.

This outline can be for the following blanks: 9’3”Y, 9’4”B, 9’5”M, 9’8”Y, 9’8”EPS

* * All parabolic dimensions are “inside widths” measured across from cut to cut. Extra width must be added to the dimensions listed to account for thickness of stringers. Overall blank width is narrower due to the thickness of mate- rial removed during the cutting process.

19" 20" 48.26 cm 50.80 cm

1 1 11 /4" 11 /2" 28.58 cm 29.21 cm

1 1 4 /2" 4 /2" 11.43 cm 11.43 cm

USBlanks.com USBlanks.com/catalog/parabolic-stringers/94bparabolic/ 112 (310) 225-6774 MULTI-BOARD BOXES WITH BOX ENDS

INSIDE DIMENSIONS BOX SIZE: LENGTH WIDTH HEIGHT

1. 7’4” 7’2” (2.24 m) 25” (63.5 cm) 12” (30.5 cm)

2. 8'4" 8'2" (2.49 m) 25" (63.5 cm) 12" (30.5 cm)

3. 10'8" 10'6" (3.32 m) 26" (76.2 cm) 14" (35.5 cm)

4. 12'5" 12'3" (3.73 m) 33" (83.8 cm) 12.5" (31.6 cm)

BOXES ARE A GLUED TUBE MADE OF 275# KRAFT

ENDS STAPLE IN FOR A STRUCTUAL FIT.

BOXES ARE PLAIN WITH NO LOGO.

USBlanks.com 113 (310) 225-6774 LIST OF RESELLERS US Blanks are available worldwide through a network of Resellers. Contact the Reseller nearest you for pricing & product availability.

WEST COAST, USA EAST COAST, USA CENTRAL / MITCH’S SURF SHOP US BLANKS SOUTH AMERICA 631 Pearl St 2775 Business Center Blvd SURFOAM CENTRAL AMERICA La Jolla, CA, 92037 Melbourne, FL, 32940 Centro Comercial Palmas de Tamarindo, (858) 459-5933, MitchsSurfShop.com (321) 253-3626, USBlanks.com Local Numero 6, de la plaza de deportes 200 metros Sur, Villareal MITCH’S SURF SHOP THE SURF SOURCE Guanacaste, Costa Rica 363 Hwy 101 52 W 3rd St (506) 8447-1283 Solana Beach, CA, 92075 Atlantic Beach, FL, 32233 SurfoamCentralAmerica.com (858) 481-1354, MitchsSurfShop.com (904) 247-0808, SurfSource.net

FIBERGLASS SERVICES / SOURCE U.S. FIBERGLASS PRODUCTS / WRV WAYO WHILAR SURFBOARDS 291 Roymar Rd 8778 Caratoke Hwy Av. Grau 111 Baranco Oceanside, CA, 92058 Harbinger, NC, 27941 Lima, Peru (760) 722-1666, FiberglassSource.com (252) 491-8535, [email protected] 51 1 254 2344, [email protected]

BASHAM’S SURF SHOP GREENLIGHT SURF SUPPLY SURFHOUSE 213 Calle de Los Molinos 187 Parker Ave, Manasquan Badajoz 12, Department 203 San Clemente, CA, 92677 NJ, 08736, (732) 223-1694 Las Condes Santiago, Chile (949) 361-2203, BashamsSurfShop.com GreenLightSurfSupply.com 02 2124952, [email protected]

PURE GLASS 1777 Placentia Costa Mesa, CA, 92627 HAWAII, USA JAPAN (949) 548-2912, PureGlass.com FIBERGLASS HAWAII MANEUVERLINE 1377 Colburn St 3-8-2 Miyoshi Kohtohku FOAM E-Z Honolulu, Oahu, HI, 96817 Tokyo, Japan, 135-0022 6455 Industry Way (808) 847-3951, FiberglassHawaii.com +81 3 5245 3113, Maneuverline.co.jp Westminster, CA, 92683 (714) 896-8233, FoamEZ.com FIBERGLASS HAWAII MANEUVERLINE 914 Palm Pl 6-8-24 Ichinomiya Samukawa THE CRAFT Wahiawa, Oahu, HI, 96786 Kanagawaken, Japan, 253-0111 141 Suburban Rd (808) 621-5667, FiberglassHawaii.com +81 467 72 6226, Maneuverline.co.jp San Luis Obispo, CA, 93401 (805) 782-9802, TheCraftGlassworks.com FIBERGLASS HAWAII 246 Papa Pl FIBERGLASS HAWAII Kahului, Maui, HI, 96732 4350 Transport St (808) 871-7955, FiberglassHawaii.com Ventura, CA, 93003 (805) 644-0009, FiberglassHawaii.com EUROPE ARROW SURF SHOP SEABASE 2324 Mission St Unit 10, Seabase Industrial Estate Santa Cruz, CA, 95060 Newquay, Cornwall, UK, TR7 2SX (831) 423-8286, ArrowSurfShop.com +44 (0) 1637 875 811, Seabase.eu

ARROW FACTORY SEABASE 1115 Thompson Ave 245 Av. des Tuileries, Z.A. de Pedebert Santa Cruz, CA, 95062 Soorts-Hossegor, 40150, France (831) 462-2791, ArrowSurfboards.com +33 (0) 5 58 41 77 05, Seabase.eu

FIBERGLASS SUPPLY YALANTICO 11824 Water Tank Rd Calle Los Olivos, 9, Poligono Ind., Burlington, WA, 98233 Arinaga Gran Canaria, 35119, Canary Is. (509) 493-3464, FiberglassSupply.com +34 928 181 938, Yatlantico.es

USBlanks.com USBlanks.com/resellers 114 (310) 225-6774 PU QUICK REFERENCE GUIDE

BLANK GENRE LENGTH NOSE @ 12” MAX MAX TAIL @ 12” NOSE TAIL STRAIGHT LINE WIDTH THICKNESS @ TIP @ TIP

Deck: Tip to Tip Width Thick. Width Thick. Rocker Rocker

5’9”P Shortboard 5’9 5/8” 13 11/16” 1 5/8” 19 3/8” 2 7/16” 14 13/16” 1 3/4” 4 3/4” 2”

5’10”RP Fish/Egg 5’10 3/4” 19 5/16” 2 3/16” 24 7/8” 2 15/16” 20 3/8” 2 3/16” 4 5/8” 1 15/16”

6’0”P Shortboard 6’0 1/4” 14 1/16” 1 5/8" 20” 2 1/2” 15 9/16” 1 7/8” 4 5/8" 1 11/16”

6'0"R Shortboard 5’11 3/4” 16 3/8” 2 3/16" 21 5/8” 3” 17 1/8” 2 1/4” 4 7/16” 2 1/8”

6’2"A Fish/Egg 6’2" 19" 2 1/8” 23 1/2” 2 15/16" 18 9/16” 2" 4 3/4” 1 13/16”

6'2"P Shortboard 6’1 7/8” 14" 1 5/8” 20 1/2” 2 1/2" 15 7/16” 1 7/8" 4 7/16" 2 1/4”

6’3"EA Shortboard 6’3 1/4” 14 3/16” 1 11/16” 20 5/8” 2 9/16” 15 7/16” 1 7/8” 5 1/2” 2 1/16”

6’4"EA Shortboard 6’3 1/2” 14 3/16" 1 3/4” 20 5/8" 2 3/4” 15 7/16" 2" 5 1/2” 2 1/16" 6'4"MB Shortboard 6’4 1/8” 14 3/4” 2 5/16” 21 7/16” 3 3/16” 16 3/4” 2 5/16” 4 7/8” 2" 6’5"A Fish/Egg 6’4 7/8” 18 7/8” 2 3/16” 23 1/2" 3 1/8” 18 3/8” 2 1/8” 5 1/6” 1 3/4”

6'5"R Shortboard 6'4 3/4” 16 7/8” 2 3/8” 21 3/4” 3 1/4” 17" 2 7/16” 4 11/16” 2 1/4" 6’6"EA Shortboard 6’5 3/8” 14 5/8” 1 7/8” 21 1/4” 2 15/16” 15 3/4” 2 1/16” 5 5/16” 2 3/16” 6’7"P Shortboard 6’6 1/2” 14 1/2” 1 9/16” 21 1/2” 2 3/4" 15 7/8” 1 13/16” 5 1/4” 2 3/8”

6’8"A Fish/Egg 6’7" 15 9/16” 2 3/16” 21 7/8” 2 15/16" 16 3/4" 2 1/4" 5 5/16" 1 3/4" 6’8"AX Fish/Egg 6’7" 15 9/16” 2 9/16” 21 7/8” 3 5/16” 16 3/4" 2 5/8” 5 5/16" 1 3/4" 6'8"P Shortboard 6’6 3/4” 14 1/2" 1 11/16” 21 3/8” 2 3/4" 15 11/16” 1 7/8" 5 1/16” 2 3/16"

6'8"RP Fish/Egg 6’8 3/4” 18 9/16” 2 1/8” 25 1/8” 3" 20" 2 3/16" 5" 2 1/8" 6’9"EA Shortboard 6'8" 14 1/8” 1 7/8" 21 5/16” 2 15/16” 15 5/8” 2" 5 9/16” 2 1/2”

6'9"R Shortboard 6’9 5/8” 17 3/8” 2 7/16” 23 1/8” 3 9/16” 17 3/4” 2 9/16” 4 7/8" 2 3/8" 6’10"A Fish/Egg 6'9 1/2” 19 1/16” 2 3/8" 24" 3 1/2” 18 1/8” 2 5/16" 5” 1 7/8” 7’0”A Shortboard 6’10 3/4” 15 5/8” 2 1/16” 22 1/8” 3 3/16" 15 3/4" 2 3/16" 5 1/2" 2"

7’1"A Shortboard 6’11" 15 1/2” 2 3/16” 22 3/16” 3" 15 5/8" 2 1/8" 5 11/16” 2 1/16" 7’1"EA Funboard 6'11 3/4” 15 3/4” 2” 22 9/16” 3” 16 1/4” 2 1/8" 5 3/8” 2 1/4" 7’2"EA Gun 7’1 7/8” 13 1/4” 1 13/16” 21 5/8" 2 15/16” 15 1/4” 2 1/16" 6 1/16” 2 9/16”

7’3"A Fish/Egg 7’2 3/8” 18 1/2” 2 7/16" 24" 3 5/8” 17 3/4" 2 5/16" 5 5/16” 2 1/16" 7’4”SP Fish/Egg 7’4 3/4” 20 3/8” 2 1/4” 24 1/16” 3 3/8” 17 1/2” 2 3/8” 4 1/8” 2 3/8" 7’5"A Funboard 7’3 7/16” 15 3/16” 2” 21 7/8" 3” 15 3/8” 2 1/16" 6” 2 1/8"

7’6"EA Funboard 7’5 3/8” 15 5/8” 2 1/16" 23" 3 3/16” 16 1/8” 2 1/8" 5 3/8" 2 5/16” 7’7"A Funboard 7’6" 16 1/4” 2 5/16” 22 7/8” 3 7/16” 16 1/8" 2 5/16" 6" 2 3/16" 7’8”EA Gun 7’8 3/16” 12 3/4” 1 13/16" 21 7/8" 3" 14 1/2” 2" 6 3/16” 2 5/8”

7’9"H Fish/Egg 7'8 3/8” 19 3/4” 2 1/16" 23 9/16” 3 3/16" 17 1/16” 2 1/16" 3 1/2” 2 15/16” 7’9"HX Fish/Egg 7'8 3/8” 19 3/4” 2 7/16" 23 9/16” 3 9/16" 17 1/16” 2 7/16" 3 1/2” 2 15/16” 7’10”SP Funboard 7’10 3/4” 20 7/16” 2 5/16" 24 3/8” 3 3/8" 17 1/8" 2 5/16" 4 1/2” 2 1/2"

Page 1 of 2 USBlanks.com 115 (310) 225-6774 PU QUICK REFERENCE GUIDE

BLANK GENRE LENGTH NOSE @ 12” MAX MAX TAIL @ 12” NOSE TAIL STRAIGHT LINE WIDTH THICKNESS @ TIP @ TIP

Deck: Tip to Tip Width Thick. Width Thick. Rocker Rocker

7’11"A Gun 7'10 11/16” 13 1/4" 2 1/8" 21 7/8" 3 1/8" 14 1/8” 2 1/8” 6 7/16” 2 1/2"

8’0”H Fish/Egg 7’11 5/8” 19 1/16” 2 1/8" 23 5/8” 3 5/16" 16 7/16” 2 1/8” 3 9/16” 3 1/8”

8’1"EA Funboard 7'11 3/4” 17 1/16” 1 15/16” 24 1/16” 3 3/8” 16 3/4" 2 1/8” 6 7/16” 2 11/16”

8’2"A Funboard 8’1 1/2” 17 3/8" 2 7/16" 25" 4 1/16” 17 11/16” 2 5/8" 6 5/8” 2 9/16"

8’2"AX Funboard 8’1 1/2” 17 3/8" 2 13/16" 25" 4 7/16” 17 11/16” 3” 6 5/8” 2 9/16"

8’3"H Funboard 8’2 5/8” 18 3/4” 2 1/16” 23 5/8" 3 3/8” 16 5/16” 2 1/16" 4 1/8" 3 3/16”

8’4"SP Fish/Egg 8’3 13/16” 19 1/4” 2 1/4" 24 3/16” 3 3/8” 16 1/2” 2 1/4" 4 3/4" 2 13/16”

8’4"SPX Fish/Egg 8’3 13/16” 19 1/4” 2 5/8" 24 3/16” 3 3/4” 16 1/2” 2 5/8" 4 3/4" 2 13/16”

8’5”A Gun 8’5 1/2” 12 15/16” 2 3/16" 22" 3 3/8” 13 11/16” 2 3/16" 6 3/4” 2 7/16”

8’6"EA Funboard 8’5 1/8” 16 1/2” 2 1/16” 24 1/16" 3 3/8” 16 3/16” 2 3/16" 6 9/16” 2 5/8" 8’9”Y Longboard 8’8 1/2” 20 1/2” 2 5/16" 24 13/16” 3 3/8” 18" 2 5/16" 4 1/8" 3 3/16" 8’9”YX Longboard 8’8 1/2” 20 1/2” 2 11/16" 24 13/16” 3 3/4” 18" 3” 4 1/8" 3 3/16"

9’2”A Gun 9’2” 12 5/8” 2 3/16" 22 1/4” 3 1/2” 12 3/4” 2 1/16" 7 5/8” 2 3/4” 9’3"A Funboard 9'2 5/8” 17 1/8” 2 1/4" 25 1/2” 4 5/16” 16 15/16” 2 3/4” 7 11/16” 3 1/16” 9’3"AX Funboard 9'2 5/8” 17 1/8” 2 5/8" 25 1/2” 4 11/16” 16 15/16” 3 1/8” 7 11/16” 3 1/16”

9'3"Y Longboard 9'2 5/8" 20 5/8” 2 3/8" 25 1/16” 3 1/2" 17 5/8” 2 3/8" 4 5/16” 3 1/4” 9’4"B Longboard 9’3 1/16” 20 5/16” 2" 25 1/16" 3 5/16" 16 5/16" 2 1/8” 4 3/4" 3 1/2” 9’5"M Longboard 9'3 3/4” 20 1/4” 2 1/16” 24 11/16” 3 3/16" 16" 2 1/8” 4 13/16” 3 5/8”

9’8"Y Longboard 9’7 3/4” 20 3/4” 2 1/2” 25 1/4” 3 5/8" 17 5/8” 2 1/2” 4 1/2" 3 5/8" 9’9"A Gun 9’8 3/8” 12 7/16” 2 1/8" 22 7/16” 3 11/16” 12 3/4" 2" 7 11/16" 3 1/8" 9’9"AX Gun 9’8 3/8” 12 7/16” 2 1/2" 22 7/16” 4 1/16” 12 3/4" 2 3/8" 7 11/16" 3 1/8"

9'9"B Longboard 9’9 1/8” 19 15/16” 2 1/4” 24 15/16” 3 3/4" 16 7/16” 2 1/4" 4 7/16” 4 1/8” 10’0”BG Gun 10’0 3/8” 17" 2 7/8” 25 5/8” 4 9/16” 16 5/16” 2 7/8” 7 7/16” 3 1/4" 10’1"C Longboard 10’1 3/4” 20 7/8” 2 3/4” 25 7/16” 4 1/8” 17 15/16” 2 13/16” 4 7/16” 3 5/8"

10’2"B Longboard 10'1 1/2” 20 3/4" 2 5/16” 25 3/16” 3 1/2” 17 9/16” 2 1/4" 4 13/16" 3 7/16” 10’2"BX Longboard 10'1 1/2” 20 3/4" 2 9/16” 25 3/16” 3 3/4” 17 9/16” 2 1/2" 4 13/16" 3 7/16”

10’6"A Gun 10’5 7/8” 12 3/8” 2 1/8” 23 3/16” 3 3/4" 12 3/8” 2" 8 3/16” 3 7/16” 10’6"AX Gun 10’5 7/8” 12 3/8” 2 5/8” 23 3/16” 4 1/4" 12 3/8” 2 1/2" 8 3/16” 3 7/16” 10’8"BG Gun 10’8 1/4” 16 3/4” 2 13/16" 25 9/16” 4 9/16” 15 13/16” 2 3/4" 7 15/16” 3 7/16"

10'8"C Longboard 10'8 1/8” 21 7/16” 2 3/4" 26 9/16” 4 5/16" 18 9/16" 2 7/8" 4 15/16” 3 7/8” 10'8"Y Longboard 10’7 5/16” 20 1/2" 2 9/16" 25 1/2" 3 3/4" 17 3/8” 2 1/2" 5 1/4" 3 5/8” 10’10"T SUP 10’9" 25 3/8” 2 7/8” 32 1/16” 5” 21 15/16” 3 9/16” 5 1/8” 3 1/16"

11’3”D Longboard 11’2” 19 9/16” 2 7/16” 26 7/8” 4 7/32” 17 9/16" 2 11/16” 5 3/8" 3 1/4" 11’8"BG Gun 11’8 15/16” 17 1/16" 2 13/16” 26 3/8” 4 3/4” 15 15/16” 2 7/8” 8 3/8” 3 9/16”

Page 2 of 2 USBlanks.com 116 (310) 225-6774 CALIFORNIA SALES POLICY Number 6, Revision Date 1/1/17

WHOLESALE - US Blanks is a wholesale distributor, selling only to customers engaged in resale.

QUANTITY DISCOUNTS - US Blanks offers a percent discount based on a single shipment quantity. To qualify, an order must be placed for a single delivery to a single location. If US Blanks cannot supply the blanks as requested, the quantity discount will be honored. The higher percentage discount between QUANTITY DISCOUNT and ANNUAL DICOUNT will be used to price an order. ANNUAL DISCOUNT - US Blanks offers a percentage annual discount based on the dollar volume of sales over a twelve month period. At lease every six months all accounts will be reviewed and adjusted per the dis- count schedule below.

Customers may request a review of their annual discount at any time, based on the prior six month purchasing history. There will be no retroactive increases or decreases based on adjusted discount. US Blanks may negotiate an annual discount for a new customer based on prior history, which will be adjusted in six months based on actual purchases.

For a full US Blanks Discount Policy please contact our office.

DELIVERY - Delivery will be at no charge to delivery points in Southern California within our normal local delivery area. Exact delivery dates are not set, however we will deliver to each area at least once per week. De- livery to the Central Coast areas will be approximately every 3-4 weeks and will have a small per blank delivery charge based on blank size.

To qualify for delivery, customers must provide an acceptable commercial location to receive blanks within nor- mal business hours. Alternate drop off points, keys, or other arrangements are requested to insure an efficient delivery.

Delivery outside our normal route will only be considered based on location and delivery back log. Delivery outside our normal route (or excess re-scheduling of deliveries) will be charged an hourly delivery rate from and to the closest stop, or require a minimum number of blanks be purchased.

Delivery priority will be based on a combination of oldest order first, combined with manufacturing require- ments.

STANDARD OF QUALITY – Imperfect inspection, shipping and handling damage, and small variations in quality must be accepted uniformly by all customers. Special inspection and sorting is not allowed. Damage and inspection mistakes will be corrected where practical. All blanks will be considered FIRST Quality unless marked SECOND. All blanks sold will be structurally sound. Blanks that are determined by US Blanks to be structurally unsound will be destroyed.

Blanks will be marked as a SECOND if there is a flaw that limits the size board that can be made from a blank, a cosmetic problem, or a blemish that requires limited filling.

SECONDS will be priced based on supply and demand. SECONDS are sold “AS IS” and are not eligible for return.

Page 1 of 3 USBlanks.com 117 (310) 225-6774 CALIFORNIA SALES POLICY Number 6, Revision Date 1/1/17

SUB-STANDARD BLANKS – US Blanks will do our best to accurately determine the quality of a blank. Oc- casionally we may error, a flaw may not be visible until a blank is shaped, or a blank may become damaged under the control of US Blanks. If any of these circumstances should occur, US Blanks will remedy the situation to the customer’s satisfaction by either giving a price credit between the cost of the purchase price and a SECOND price, or replacing the blank with a duplicate.

To be eligible to have the blank replaced the original blank must be returned to US Blanks or their distributor.

US Blanks will not accept for return or credit any blank that is damaged while in the control of the customer. Handling damage in transit by a common carrier will be negotiated.

Returns or credits normally will not be allowed for blanks that we cannot identify as a US Blank, or if the fault cannot be determined. Once a flaw is identified, we encourage stopping work on a blank if a return or credit is going to be requested. Costs incurred beyond the point of identifying the flaw will be the responsibility of the shaper.

Requests for credits due to a quality issue must be made within six months of the purchase date.

SHAPING CREDIT - In addition to a replacement blank, the following fee will be credited to customers who have shaped a blank, either with a machine or by hand, that has been determined to be an inferior product, based on US Blanks quality standards. The original blank must be returned to be eligible for the replacement blank and shaper’s credit. In lieu of this fee, a second single stringer blank may be negotiated.

FINISHED BOARDS / FAULTY FOAM – Once glassed, it is very difficult to determine foam failure in a finished board. Shaping and glassing integrity, and customer use, all affect the strength of the finished board. Most structural problems with a blank should be identified in the shaping and/or glassing processes. US Blanks will guarantee its blank in those rare circumstances that a structural problem cannot be detected during shaping or glassing, providing the foam is tested and proven to be faulty.

To be tested, US Blanks will require a piece of the finished board which we will test in comparison to a stock blank. Original blank size and density will be required to complete testing. All tests will be completed at the expense of US blanks.

If the foam is found faulty, we will pay up to but no more than the direct cost of material, supplies, and labor upon receipt of documentation.

If the foam is found faulty, and the customer wishes to repair the board and sell at a discount, US Blanks will cover the direct costs of repairing the board and the discount of the selling price.

US Blanks will not guarantee normal wear and tear on a surfboard, including but not limited to discoloration, cosmetic flaws, twist, dents, dings, small delaminations, excessive heat exposure, or broken boards.

Page 2 of 3 USBlanks.com 118 (310) 225-6774 CALIFORNIA SALES POLICY Number 6, Revision Date 1/1/17

RETURNS – US Blanks will accept First Quality blanks for return if they meet all of the following criteria: -Standard stringer & rocker – no custom glue-ups -Blank is in acceptable, First Quality condition -No more than 30 days from purchase date

All returns will be subject to a 25% re-stocking fee.

REVISIONS TO SALES POLICY – US Blanks reserves the right to revise this Sales Policy at any time. Cus- tomers may request a current copy of this policy at any time. Each revision will be numbered and dated.

It is our goal to adhere to this Sales Policy consistently and fairly to all customers. Should a customer feel they are not being sold to in accordance to this policy we would like it brought to the attention of the owners. Retro- active retribution will be instated if an error in administering this policy was found. US Blanks will not be liable or pay for costs, damages, etc. sustained by non-conformance to this policy.

Page 3 of 3 USBlanks.com 119 (310) 225-6774 SOLAIN RTHEM USA ADE USBLANKS.COM

BY THE SUN, FOR THE OCEAN

Established 2006 Product of Los Angeles, California

USBlanks.com @USBlanks (310) 225-6774