OPTUS AAxicom
be
?I
"Ann
.1.
Figure 3: Photo Montage of propsosed works
Figure 3 is taken at the corner of Blake Street and Walcott Street looking toward the existing facility.
18 1 P a g e OPTUS AAxicom
Figure 4: Photo Montage of propsosed works
Figure 4 is taken at Little Walcott Street looking North West towards the existing facility.
The proposal is for the extension of the existing structure by 3.46m. It is not expected than the extension will signficantly increase the scale of the facility when viewed from the surrounding residences. In addition, the removal of the lower level equipment will reduce the scale of the existign site when viewed from street level.
The provision of the improved telecommunications services to the area will have many beneficial impacts on the people who live, work visit and travel through the area. Better internet access will improve education, access to media and information and increase efficiency in the work place. Businesses will benefit due to the proposed facility comprising a range of telecommunications network providers including, including Optus, Telstra and Vodafone, benefiting the majority of telecommunications customers. The subject area is undergoing population growth and change. It is necessary to ensure suitable infrastructure is in place to cater for this rapid population increase.
19 1 P a g e NOTES: 1. ALL INFORMATION TO BE CHECKED ON SITE PRIOR TO FABRICATION AND CONSTRUCTION. MGA 2. DRAWINGS BASED ON INFORMATION PROVIDED BY OTHERS. 3. CONSTRUCTION CONTRACTOR TO CONFIRM SUITABILITY OF PROPOSED EWP 4- SET-UP/PARKING LOCATION ON SITE PRIOR TO WORK COMMENCING. 4. SERVICES INFORMATION CONTAINED ON THIS DRAWING IS INDICATIVE ONLY / AND REFERENCE SHOULD BE MADE TO THE AUTHORITIES DRAWINGS TO / CONFIRM ACCURACY AND COMPLETENESS. WHERE INFORMATION IS / AVAILABLE, THE SUB-SURFACE SERVICES INSTALLED BY AGENTS OTHER THAN AUTHORITIES HAVE BEEN SHOWN, BUT ADDITIONAL UNDOCUMENTED "N SERVICES MAY BE PRESENT. SHOULD THE CONTRACTOR BELIEVE THAT - SUB-SURFACE SERVICES ARE AT RISK OF DAMAGE DURING CONSTRUCTION, THE CONTRACTOR SHOULD NOTIFY THE RELEVANT AUTHORITIES AND B L A K E S T R E E T ESTABLISH THE EXACT LOCATION OF THE SERVICES. LEGEND
1i------/ / FENCELINE /------0 e 0 e OPTUS U/G POWER SUPPLY / EXISTING OPTUS UNDERGROUND ELECTRICAL SUPPLY (APPROX. LOCATION ONLY) \ / EXISTING MSB AND OPTUS METER EXISTING VHA INSTALLATION ENCLOSURE
EXISTING PROPERTY CARPARK / EXISTING COMMERCIAL BUILDINGS EXISTING OPTUS INSTALLATION / EXISTING TELSTRA INSTALLATION )ROCLA) 14 75m EXISTING AXICOM HIGH / CONCRETE MONOPOLE WITH 10m EXTENSION . )
ii
PROPOSED EWP SETUP LOCATION (REFER NOTE 3)
OVERALL SITE PLAN SCALE 1:500 /7
Client: Project: Drawing Title: MOBILE NETWORK AUSTRALIA OVERALL SITE PLAN NOKIA • Nokia Networks Pty Ltd iJ SITE No:- P0031 Level 5, 60 Union St, Locked Bag 34, Pyrmont NSW 2009 I U A 111017 ISSUED FOR CONSTRUCTION AXICOM [P SBL DL OS 1: +el 2 9429-9100 I www.networks.nokia.com r NORTH PERTH Drawing Status: Drawing No. Revision <1 AB D.t.viDetail.oI10.08 12 AS BUILT DALY MT MI DI CT Rev cont igner iRe prover REAR OF 1-3 BLAKE ST FOR CONSTRUCTION P0031-G2 A COPYRIGHT© OPTUS MOBILE PTY LTD ABN 65 054 365 696. ALL RIGHTS RESERVED. VERSION 2.0 NOVEMBER 2013 20 10 0 10 20 30 40 50mm - LEGEND MGA FENCELINE
0 e OPTUS UIG POWER SUPPLY EXISTING OPTUS U/G ELECTRICAL SUPPLY (INDICATIVE ONLY) ANTENNA LEGEND:
/4A EXISTING VHA CHAINLINK______EXISTING VHA EQUIPMENT SHELTER. EXISTING NEW, REPLACE,E, ETC FUTURE SECURITY FENCE FIXED TO RECOVER EXISTING OPTUS 2100 BTS AZ0 ELEVATED STEEL PLATFORM EQUIPMENT WITHIN SHELTER.
EXISTING OPTUS CHAINLINK EXISTING CONCRETE PAD (BELOW) ///// SECURITY FENCE FIXED EXISTING OPTUS AND VHA TO ELEVATED STEEL PLATFORM // WITH 980 WIDE ACCESS GATE / ELEVATED STEEL PLATFORM / CARPORT BELOW) / INSTALL NEW OPTUS GPS ANTENNA ON TOP OF RRU MOUNT (REFER TO / EXISTING TELSTRA GPS NOTES) EQUIPMENT ROOM 11-0 0. NEW OPTUS PANEL ANTENNAS // / / - /// // / / (3 OFF) ON NEW ANTENNA GENERAL NOTES: / / MOUNTING STEELWORK (REFER / / / / 1. REFER TO DRAWING P0031-Al FOR ANTENNA SYSTEM CONFIGURATION. NOTE 4) \ ' EXISTING HUTCHISON 300 WIDE 2. REFER TO DRAWING P0031-Gi FOR STRUCTURAL CERTIFICATION NOTES. / / 3. EXISTING OTHER CARRIERS ANTENNAS AND HEADFRAME NOT SHOWN / / CABLE LADDER SUSPENDED \ / / // EXISTING STEEL STAIR / / UNDER PLATFORM FOR CLARITY. // / / 4. RECOVER EXISTING OPTUS PANEL ANTENNAS AT EL.14.70 (3 OFF AND HANDRAIL / / EXISTING VODAFONE L,50 WIDE / /\ DPS60-16ED), (2 CNNPX308R), / // CABLE LADDER SUSPENDED AT EL.14.93m OFF AT EL.22.64m & ALL EXISTING / / UNDER PLATFORM ASSOCIATED ANCILLARIES AND INSTALL NEW HUAWEI ASI4517R1 PANEL ANTENNAS (3 OFF), RRUs AND ANCILLARIES AT EL.26.56m ON NEW CONCRETE SLAB /// // ANTENNA MOUNTING STEELWORK TO BE FIXED TO THE AXICOM - >K< / / / / / EXISTING OPTUS PREFABRICATED / EQUIPMENT SHELTER TO ACCOMMODATE MONOPOLE EXTENSION (REFER STRUCTEL DRG. STD-20526 SHEETS NEW OPTUS EQUIPMENT (REFER DRG. 1 & 2, ISS 1 FOR DETAILS). / EXISTING AXICOM P0031-Fl FOR EQUIPMENT LAYOUT). 5. INSTALL NEW 6 OFF 1800/2100/2300/2600 COMBINER (2 OFF PER (ROCLA) 14.73m / SECTOR) AND 3 OFF 700/900 COMBINER (1 OFF PER SECTOR) BEHIND HIGH CONCRETE I NEW OPTUS RRU's (12 OFF) ON NEW EACH PANEL ANTENNA FIXED TO THE NEW MOUNTING STEELWORK. MONOPOLE WITH >\ MOUNTING STEELWORK (REFER NOTE 6) ////6. INSTALL NEW 12 OFF OPTUS RRUs (2 OFF FRPA + 1 OFF FXDB + 2 OFF EXTENSION. / FXED + 2 OFF FRGU + 3 OFF FZNI + 2 OFF FRHF) ON NEW RRU MOUNTING s EXISTING FEEDER CABLES TO BE STEELWORK (REFER STRUCTEL DRG. STD-20526 SHEETS 31-0 1 & 2, ISS 1 2400 21-0 RECOVERED AND REPLACED WITH NEW FOR DETAILS). / 1200 / HYBRID TRUNK CABLES. (REFER NOTE 7) 7. RECOVER ALL EXISTING COAXIAL FEEDERS AND INSTALL NEW 3 OFF / EXISTING VIVIDWIRELESS MLEH 9/18 HYBRID TRUNK CABLE (1 OFF PER SECTOR) TO BE RUN IN EXISTING BOLLARDS )TYP OUTDOOR UNIT WITH SECURITY EXISTING CABLE ROUTES FROM SHELTER TO OPTUS ANTENNAS. FENCE AND GATE 8. ALL INFORMATION TO BE CHECKED ON SITE PRIOR TO FABRICATION AND CONSTRUCTION. EXISTING TELSTRA 300 ______EXISTING VIVIDWIRELESS WIDE CABLE LADDER 130 WIDE ELEVATED CABLE TRAY OPTUS GPS ANTENNA NOTES: (MOUNTED ON SLAB) OPTUS GPS ANTENNA MUST BE INSTALLED IN ACCORDANCE WITH "OPTUS EJV GPS INSTALLATION INSTRUCTION (OM 37886) REV.1A". I MGA ZONE l 1. THE GPS ANTENNA LOCATION SHOULD NOT BE OBSTRUCTED IN THE so I HORIZONTAL PLANE (AZIMUTH) BETWEEN 220° AND 150° LOOKING I E 392 075 DETAIL I N 6 467 482 I CLOCKWISE THROUGH TRUE NORTH. AT CL OF MONOPOLE SCALE 1:100 2. THE SUGGESTED INSTALL LOCATION FOR THE GPS ANTENNA IS ON TOP OF RRU MOUNT WITH UNOBSTRUCTED 180° VIEW OF THE SKY.
Client Project Drawing Title MOBILE NETVVORK NOKIA AUSTRALIA SITE LAYOUT AND SETOUT PLAN Nokia Networks Pty Ltd SITE No:- P0031 Level 5,60 Union St, Locked Bag 34, Pyrmont NSW 2009 0 PTUS 13,10--T A 17 ISSUED FOR CONSTRUCTION AXICOM [P SBL DL OS T: +6125425-9100 I www.networks.nokia.com NORTH P E RTFI Drawing Status Drawing No Revision AB 10.0812 AS BUILT LTE1800I DALY MT MI DI CT Rev Date Revision Details Consultant CAD Designer Verifier Approver REAROF1-3BLAKEST FOR CONSTRUCTION P0031-G3 A COPYRIGHT© OPTUS MOBILE PTY LTD ABN 65 054 365 696. ALL RIGHTS RESERVED. VERSION 2.0 NOVEMBER 2013 20 10 0 10 20 30 40 50mm U- ILL CD UJ >- U) —J LLJ LJ CD LU I-U LL :ef U-I I— UJ U- U- — - UJ < F- U 1= —J— —J— CD >-CD c f LUF- - C) QDH-C) C) H- DC LL- U— C) C) LLJCD HIn CD C) F- F- - DC< 'D LLJ < < CIC) U—< 11 U— C) LU << C) 0 ---H___ uJ —J uJ C) OLU C) EELUHU— H- — ><-.UJ— L_ U- - U) C) (I) C)C)U-D C) - C) C) U) II C)H- - z.ZZOC LUC)jC) H-< Z U- U- H- H- - I-n U— LU LU Ln U- CL Z ID C) U- C) - L. U- U- of CD H- U- U- LU U- LU C)CD C) C) C) C) C) LU U- > U- C)5, CD — U— U- H- LU C4 04 _ LU LU C) LU " — U— LU Client: Project: Drawing Title: MOBILENETWORK SITEELEVATION NOKIA AUSTRALIA 0 PTU5 SITENo:- P0031 Nokia Networks Pty Ltd Level 5,60 Union St, Locked Bag 34, Pyrmont NSW 2009 NORTHPERTH A 131017 ISSUED FOR CONSTRUCTION AXICOM [P SBL DL OS T: +6125425-9100 I www.networks.nokia.com Drawing Status Drawing No Revision AB lOOt 12 AS BUILT LTE1800I DALY MT MI DI CT FORCONSTRUCTION P0031-G4 A REAROF1-3 BLAKE ST Rev Date Revision Details Consultant CAD Designer Verifier Approver COPYRIGHT© OPTUS MOBILE PTY LTD ABN 65 054 365 696. ALL RIGHTS RESERVED. VERSION 2.0 NOVEMBER 2013 20 10 0 10 20 30 40 3( A- OPERATOR SECTOR IDENTITY No (SAO) STATUS NEW NEW NEW AZIMUTH (0 TN) 00 TN 120° TN 240° TN EL C!L ANTENNA 26.56m 26.56m 26.56m CO-ORDINATES (NOTE 2) E 392 075 1 N 6 467 482 E 392 075 1 N 6 467 482 E 392 075 1 N 6 467 482 ANTENNA MECHANICAL TILT(°) 00 0° 0° ELECTRICAL TILT (0) 60 60 40 1 40 40 40 80 80 60 60 60 60 80 80 60 60 60 60 RET YES YES YES MAKE & MODEL HUAWEI AS14517R1 HUAWEI AS14517R1 HUAWEI AS14517R1 DIMENSIONS (HxWx D) 2600 x 548 x 150 2600 x 548 x 150 2600 x548 x150 PORTS 1&2 3&4 5&6 7&8 9&10 11&12 1&2 3&4 5&6 7&8 9&10 11&12 1 &2 3&4 5&6 7&8 9&I0 II& PORT USER OPTUS OPTUS OPTUS OPTUS OPTUS OPTUS OPTUS OPTUS OPTUS OPTUS OPTUS OPTUS OF TUS OPTUS OPTUS OPTUS OPTUS OPT! FREQUENCY BANDS 700 7001900 18/21/26 18/21/26 2300 2300 700 700/900 18/21/26 18/21/26 2300 2300 00 700/900 18/21/26 18/21/26 2300 230 MHA COMBINER! DIPLEXER— NEW I x (700/900) + 2 x (18/21/23/26) NEW I x (700/900) + 2 x (18121/23/26) NEW I x (700/900) + 2 x (18/21/23/26) ANCILLARIES (NEW 2 x (1-7) + 2 x (1-18) + I x (U9) + 2 x (U21) + 2 x (1-26) ALL SHARED) (NEW 2x(L7)+ 2x(1-18)+ I x(U9)+ 2x(U21)+ 2x(L26) ALL SHARED) (NEW 2 x (L7) + 2 x (L18) + I x (U9) + 2 x (U2I) + 2 x (L26) ALL SHARED) RRU ! RF MODULES + NEW I x (1-23) + NEW I x (1-23) + NEW I x (L23) STATUS TECHNOLOGIES COAXIAL QUANTITY FEEDERS DESIGNATION (SIZE) ESTIMATED LENGTH STATUS EXISTING EXISTING EXISTING TECHNOLOGIES L700/U900/L1800/U2100/L2300/L2600 L700/U900/L1800/U2100/L2300/L2600 L700/U900/LI800/U2IOO/L2300/I QUANTITY 1 TRUNK MAKE & MODEL (SIZE) HUBER & SUHNER MLEH HUBER & SUHNER MLEH HUBER & SUHNER MLEH CABLES NO. OF DC/SMF PAIRS 9/18 9/18 9/18 ESTIMATED LENGTH 35m 35m 35m OTHER MANUFACTURER TECHNOLOGY DIMENSIONS ANCILLARY EQUIPMENT CODE WEIGHT (kg) PRODUCT CODE FREQUENCIES (mm x mm x mm) FRPA 700 560 x 447 x 133 25 FXDB U900 560 x 447 x 133 25 FXED 1800 560 x 447 x 133 25 RRU NSN RRU FRGU 2100 560 x 447 x 133 25 FZNI (RRH) 2300 450 x 350 x 160 17 FRHF 2600 560 x 447 x 133 25 COMBINER! COM2a E11F13P25 700/900 253 x 165 x 103 5.5 DIPLEXER COM3 E15V90P43 1800/2100/2300/2600 260 x210 x120 9 ANTENNA LEGEND: A ID ETCZ(P 0 EXISTING NEW, REPLACE, FUTURE AZ NOTES: 1. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH RF PLUMBING DIAGRAM DRAWING P0031-A2. 2. ANTENNA CO-ORDINATES ARE SPECIFIED FOR CENTRE OF STRUCTURE, TO THE NEAREST METRE. 3. ANCILLARIES REFER TO ITEMS AT OR NEAR THE ANTENNA. OPTUS ANTENNAS PLAN 4. TRUNK LENGTHS ARE ESTIMATED, ROUNDED UP TO THE NEXT Sm. 5. ALL TAILS (84 OFF) TO BE FSJ4-50, NO MORE THAN 5m IN LENGTH. SCALE 1:25 Client: Project: Drawing Title: MOBILENETWORK PANELANTENNA AUSTRALIA SITE No:- P0031 SYSTEMCONFIGURATION NokiaNOKIA Networks Pty Ltd Level 5, 60 Union St, Locked Bag 34, Pyrmont NSW 2009 OPTUS NORTHPERTH I A 1310.17 ISSUED FOR CONSTRUCTION AXICOM EP SBL .R T: +612 9429-9100 I www.networks.nokia.com Drawing Status: Drawing No. AB 10.08.12 AS BUILT (LTE1800) DALY MT FORCONSTRUCTION P0031-Al REAROF 1-3 BLAKE ST Rev Date Revision Details Consultant CAD Designer Verifier Approver COPYRIGHT © OPTUS MOBILE PTY LTD ABN 65054 365 696. ALL RIGHTS RESERVED. VERSION 2.0 NOVEMBER 2013 20 10 0 10 20 30 40