(DPS) of Texas Hat, Straw, Western Style EXHIBIT a Line 1 - HAT, FELT, WESTERN STYLE Referenced Manufacturer/Product No

Home , Cap

IFB NO. 304T-17-201A1.1 CLOTHING ACCESSORIES Department of Public Safety (DPS) of Texas Hat, Straw, Western Style EXHIBIT A Line 1 - HAT, FELT, WESTERN STYLE Referenced Manufacturer/Product No. or Equal: Resistol Felt RFTEXN-1034 Stetson Felt SFBNOE-9442

1. Style: Texan 2. Quality: 5X 100% Genuine Fur Felt 3. Color: Ranch Tan or equal 4. Body Material a. Cold weather resistance b. Fade resistance c. Water resistant treatment 5. Brim: a. Cattleman crease 045 b. Width: 3 ½ inch c. Brim of hats shall be beveled d. Be hydraulic crown creased. 6. Crown: a. Three hydraulic blocked creases b. NOT ACCEPTABLE: Hand creasing on crown c. Blocked on regular, long and extra-long ovals d. Measurement of approximately 4 ½ inches from low point of crown center crease to band line 7. Trim a. First quality 3-ply band to match hat color 8. Sweat Band a. Material: 1) Genuine roan leather 2) Skiver grain 3) Color: chocolate with gold rule line (see Exhibit 3) 4) Width: 1 5/8 inch minimum b. Non-vented c. Self-conforming d. Customization: 1) Two lines in front 2) Placement: 1/8 inch from top of band 3) Texas Department of Public Safety 4) Gold foil lettering e. Include manufacturer’s identification in gold foil 9. Lining a. Heavy satin b. Color: White

10. Tip Sticker: DPS seal shall be placed inside top of hat with a protective sweat resistant covering. a. Size: 1 ½ inch diameter b. Color: 1) Blue (PMS 2767) 2) Gold Foil 3) White

IFB No. 304T-17-201A1.1 Exhibit B Page 1 of 2 IFB NO. 304T-17-201A1.1 CLOTHING ACCESSORIES Department of Public Safety (DPS) of Texas Hat, Straw, Western Style EXHIBIT A

11. Shapes: a. Regular Oval b. Long Oval c. Extra Long Oval 12. Sizes preferred, but not limited to: a. 6 1/8 inches b. 6 ¼ inches c. 6 3/8 inches d. 6 ½ inches e. 6 5/8 inches f. 6 ¾ inches g. 6 7/8 inches h. 7 inches i. 7 1/8 inches j. 7 ¼ inches k. 7-3/8 inches l. 7 ½ inches m. 7 ¾ inches n. 7 5/8 inches o. 7 7/8 inches p. 8 inches 13. Hat Tag: Shall contain size and oval shape 14. Packaging a. Hats will be individually packaged in clear plastic covering and in separate boxes b. Boxes shall be clearly marked as to the shape, brim and size c. Box shall have sufficient size and strength to accommodate and protect each hat d. Hats shall be packaged with like sizes in cases

PICTURES ARE FOR INFORMATIONAL PURPOSES ONLY

IFB No. 304T-17-201A1.1 Exhibit B Page 2 of 2 IFB NO. 304T-17-201A1.1 CLOTHING ACCESSORIES Department of Public Safety (DPS) of Texas Hat, Straw, Western Style EXHIBIT B

Line 2 - Hat, Straw, Western Style Referenced Manufacturer/Product No. or Equal: Resistol Straw RSTEXN-3534 or equal

Resistol Straw RSTEXNX-3534 or equal

1. Style: Western, Texan 2. Quality: 10X Genuine Handwoven Shantung 3. Color: Texas Tan or equivalent 4. Material: a. Straw b. Japanese glazed shantung paper yarn c. 2 x 2 herringbone pattern weave d. 5 BU e. Lacquer Varnish or Sizing Coats Minimum: Three on brim and crown 5. Brim: a. Cattleman crease 065 b. Width: 3 ½ inch c. Steel wire insertion for shape retention d. Shall have roll flange 6. Crown: a. Three hydraulic blocked creases b. NOT ACCEPTABLE: No hand creasing on crown c. Creases blocked on regular, long, and extra-long ovals d. Crown Measurement of approximately 4 ½ inch form low point of crown center crease to band line e. Eyelets: 1) Six total, three on the lateral line of each side of the crown 2) Color shall be similar to the color of the hat 7. Trim a. 3-ply polyester or cotton band to match hat color 8. Sweat Band: a. Material: 1) Genuine roan leather 2) Skiver grain 3) Color: chocolate 4) Width: 1 5/8 inch minimum and 2 inches maximum b. Non-vented c. Self-conforming d. Customization: 1) Two lines in front 2) Placement: 1/8 inch from top of band 3) Texas Department of Public Safety 4) Gold foil lettering e. Include manufacturer’s identification in gold foil

IFB No. 304T-17-201A1.1 Exhibit B Page 1 of 2 IFB NO. 304T-17-201A1.1 CLOTHING ACCESSORIES Department of Public Safety (DPS) of Texas Hat, Straw, Western Style EXHIBIT B

9. Tip Sticker: DPS seal shall be placed inside top of hat with a protective sweat resistant covering. a. Size: 1 ½ inch diameter b. Color: 1) Blue (PMS 2767) 2) Gold Foil 3) White

10. Shapes: a. Regular Oval b. Long Oval c. Extra Long Oval 11. Sizes preferred, but not limited to: a. 6 1/8 inches b. 6 ¼ inches c. 6 3/8 inches d. 6 ½ inches e. 6 5/8 inches f. 6 ¾ inches g. 6 7/8 inches h. 7 inches i. 7 1/8 inches j. 7 ¼ inches k. 7-3/8 inches l. 7 ½ inches m. 7 5/8 inches n. 7 7/8 inches o. 8 inches 12. Hat Tag: Shall contain size and oval shape 13. Packaging a. Hats will be individually packaged in separate boxes b. Boxes shall be clearly marked as to the head size, oval shape c. Box shall have sufficient size and strength to accommodate and protect each hat d. Hats shall be packaged with like sizes in case

PICTURES ARE FOR INFORMATIONAL PURPOSES ONLY

IFB No. 304T-17-201A1.1 Exhibit B Page 2 of 2 IFB NO. 304T-17-201A1.1 CLOTHING ACCESSORIES Texas Parks and Wildlife Department (TPWD) Cap, Tactical, Winter and Summer E EXHIBIT C

LINE 3: CAP, TACTICAL, WINTER, WITH CUSTOM PATCHES Referenced Brand / Model Number or equal: Condor TC-003

1. Fabric: 100% Cotton 2. Color: Tan 3. Panels: Six 4. Eyelets: Six - One on each panel 5. Back Closure: a. Adjustable strap with buckle b. Same color as cap 6. Loop strips for panels to accommodate patches: a. Three loops strips are sewn onto cap b. Front: One Width: 3 inches Height: 2 inches c. Back: One Height: 1 inch Width: 5 inches d. Top: One Height: 1 inch Width: 1 inch 7. Cap Sizing: One size fits most

PICTURES ARE FOR INFORMATIONAL PURPOSES ONLY

IFB No. 304T-17-201A1.1 Exhibit C Page 1 of 3 IFB NO. 304T-17-201A1.1 CLOTHING ACCESSORIES Texas Parks and Wildlife Department (TPWD) Cap, Tactical, Winter and Summer E EXHIBIT C

LINE 4: CAP, MESH, TACTICAL, SUMMER, WITH CUSTOM PATCHES Referenced Brand / Model Number or equal: Condor TCM-003

1. Fabric: a. Front Panels: 40% Polyester/60% Cotton b. Back Panels: Breathable mesh c. Moisture wicking 2. Color: Tan 3. Panels: Six 4. Eyelets: Two - One on each front panel 5. Back Closure: a. Hook and loop b. Color same as cap 6. Loop strips for panels to accommodate patches: a. Three loops strips are sewn onto cap b. Front: Width: 3 inches Height: 2 inches c. Back: Height: 1 inch Width: 5 inches d. Top: Height: 1 inch 7. Width: 1 inch Cap Sizing: One size fits most

PICTURES FOR INFORMATIONAL PURPOSES ONLY – SUMMER CAP

IFB No. 304T-17-201A1.1 Exhibit C Page 2 of 3 IFB NO. 304T-17-201A1.1 CLOTHING ACCESSORIES Texas Parks and Wildlife Department (TPWD) Cap, Tactical, Winter and Summer E EXHIBIT C

Lines 5 and 6: CUSTOM PATCHES - SPECIFICATIONS 1. Custom patches per cap a. Two per cap b. Front and Back 2. Font: Arial 3. Font Size: Sized to fit individual patch 4. Required Stitch Count: a. Texas Game Warden: 7800 stitches b. State Police: 5900 stitches 5. Patch Material: a. Polyester twill b. Color: Olive Drab 6. Patch Border: Merrowed and overlocked around edge 7. Thread Type: a. Background - Fully embroidered with polyester Olive Drab thread, no visible twill. b. Lettering and Merrowed Border: 1) Color: Black 2) Polyester (#900) 8. Patch Dimensions: a. TEXAS GAME WARDEN: Width: 3 inches Height: 2 inches b. STATE POLICE: Width: 4 inches Height:1 inch 9. Hook Strip a. Glued and sewn onto each patch b. Size of strip to correspond with the size of each patch 10. The customer may request a sample of the patches prior to production

PICTURE FOR INFORMATIONAL PURPOSES ONLY

IFB No. 304T-17-201A1.1 Exhibit C Page 3 of 3 IFB NO. 304T-17-201A1.1 CLOTHING ACCESSORIES Department of Public Safety (DPS) Cap, Fitted, Cotton Spandex EXHIBIT D

LINE 7: CAP, FITTED, COTTON SPANDEX, WITH DIRECT EMBROIDERY CAP FRONT Referenced Manufacturers/Model Nos. or Equal: KC Caps 2000S-NuFit Otto Flex Stretchable Brushed Bull Denim Low Profile Style Caps, Style# 11-417

SPECIFICATIONS 1. Material: 96% cotton, 4% spandex twill 2. Required Colors: a. Black b. Khaki c. Navy Blue d. Olive Green e. Additional colors offered by manufacturer Bidder to provide additional colors on the Mandatory Price Sheet 3. Construction: a. Six panels b. Firm front panel c. Seamed front panel with full buckram d. Embroidered Eyelets: Six e. Stitching on crown f. Stitching on visor: Six rows g. Color Under Visor: Grey h. Crown Button: Industry standard to match fabric and color of cap i. Sweatband: 1) Material: Spandex stretch 2) Color: Must match color of cap 4. Sizing: a. Small/Medium (6 ¾ - 7 ¼) b. Large/Extra Large (7 1/8 – 7 5/8) 5. Direct Embroidery – Custom Logo - Cap Front Unit price of cap to include direct embroidery for logo with: a. Stitch Count: Up to 20,000 b. Thread Colors: Up to 10 Colors preferred, but not limited to: Gold Red Blue White Green c. Customer will provide artwork d. The customer may request a cap with the embroidery prior to production 6. Sample Requirement: Bidder must submit a sample with Bid and meet the following requirements: a. Color: Khaki b. Embroidery Sample: Embroidery shall be included on the front of the sample cap as in the pictures shown below

LINE 8: LOGO - ADDITIONAL STITCH COUNT AND THREAD COLORS – CAP FRONT 1. Unit price, per cap, to include direct embroidery for logo with: a. Stitch Count: 20,001 b. Additional Thread Colors: 11 and up 2. Measurements a. Height: No less than 2 ½ inches b. Width: Approximately 2 ¾ inches 3. Artwork will be provided by Customer 4. The customer may request a cap with the embroidery prior to production IFB No. 304T-17-201A1.1 Exhibit D Page 1 of 2 IFB NO. 304T-17-201A1.1 CLOTHING ACCESSORIES Department of Public Safety (DPS) Cap, Fitted, Cotton Spandex EXHIBIT D

LINE 9: DIRECT EMBROIDERY ON BACK OF CAP 1. Unit price, per cap, to include direct embroidery on back 2. One line of text 3. Height: Up to 2 inches 4. Artwork will be provided by Customer 5. The customer may request a cap with the embroidery prior to production

LINE 10: NEW LOGO DESIGN SERVICES – ONE TIME FEE 1. Services to include the design of a new logo in coordination with Customer 2. Customer may provide draft artwork for the new logo or request Contractor to design 3. Final Artwork must be approved by Customer prior to production 4. The customer may request a cap with the embroidery prior to production

LINE 11: EXISTING LOGO DESIGN REVISION SERVICES – ONE TIME FEE 1. Services to include the design of a new logo in coordination with Customer 2. Customer may provide draft artwork for the new logo or request Contractor to design 3. Final Artwork must be approved by Customer prior to production 4. The customer may request a cap with the embroidery prior to production

PICTURES ARE FOR INFORMATIONAL PURPOSES ONLY

IFB No. 304T-17-201A1.1 Exhibit D Page 2 of 2 IFB NO. 304T-17-201A1.1 CLOTHING ACCESSORIES Department of Public Safety (DPS) Cap, Custom, Mesh, Structured Fit EXHIBIT E

Line 12: Cap, Custom, Mesh, Structured Fit, with Direct Embroidery 1. Material for Panels, Visor and Back Adjustable Tab: a. Color: Texas Khaki or equal Important Note: Color swatch is available upon request from CPA point of contact b. 100% Polyester warp knitted athletic stretch mesh 1) 100 Denier polyester fiber weight 2) Mesh Holes: a) Standard aperture b) Width: 1mm c) Height: 2mm d) Horizontal distance between holes: 7mm e) Vertical Distance between holes: 6mm f) Diagonal distance between holes: 4mm 2. Construction: a. Panels: Six b. Front Panels: 1) Two 2) Lined with fused cotton buckram c. Back panels lined with polyester mesh stabilizer interlining 1) Four panels 2) Tricot knitted 3) Ametabolic 4) Bonded internally to polymesh external fabric 5) 20 denier polyester fiber weight 3. Seam Construction and Topstitching: a. Lockstitch b. Eight to ten stitches per inch 4. Eyelets: Embroidered industry standard at crown a. One per panel b. Center of eyelet to measure down center panel 6.5 cm from squatchee 5. Sweatband: a. 100% polyester cover sweatband b. Open cell, antimicrobial foam insert c. Stitching: Four rows with eight to ten stiches per inch 6. Visor Stitching: Eight line with eight to ten stitches per inch 7. Hook and Loop Tab: a. Color to match material b. Adjustable c. Extends full length back closure 8. Squatchee to match in fabric color and material 9. Inside Seams: Covered with cotton or polyester taping for increased comfort and durability. 10. Size: One size fits most 11. Customized Direct Embroidery: a. Unit price for the cap must include direct embroidery custom logo on the front center b. Unit Price shall include the embroidery based on: 1) Stitch count: Up to 20,000 2) Thread Colors: Up to Ten 3) Thread colors preferred, but not limited to: Gold Red Blue White Green 12. Measurements: a. Height: No less than 2 ½ inches b. Width: Approximately 2 ¾ inches IFB No. 304T-17-201A1.1 Exhibit E Page 1 of 2

IFB NO. 304T-17-201A1.1 CLOTHING ACCESSORIES Department of Public Safety (DPS) Cap, Custom, Mesh, Structured Fit EXHIBIT E

13. Customer will provide artwork and design with purchase order through the TxSmartBuy on-line system. 14. Sample Requirement: Bidder must submit a sample with Bid and meet the following requirements: a. Color: Khaki b. Embroidery Sample: Embroidery shall be included on the front of the sample cap as in the pictures shown below

LINE 13: LOGO - ADDITIONAL STITCH COUNT AND THREAD COLORS – CAP FRONT 1. Unit price, per cap, to include direct embroidery for logo on front of cap with: a. 20,001 stitch count b. Additional Thread Colors: 11 and up 2. Artwork will be provided by Customer 3. The customer may request a cap with the embroidery prior to production

LINE 14: DIRECT EMBROIDERY ON BACK OF CAP 1. Unit price, per cap, to include direct embroidery on back 2. One line of text 3. Height: Up to 2 inches 4. Artwork will be provided by Customer 5. The customer may request a cap with the embroidery prior to production

LINE 15: NEW LOGO DESIGN SERVICES – ONE TIME FEE 1. Services to include the design of a new logo in coordination with Customer 2. Customer may provide draft artwork for the new logo or request Contractor to design 3. Final Artwork must be approved by Customer prior to production 4. The customer may request a cap with the embroidery prior to production

LINE 16: EXISTING LOGO DESIGN REVISION SERVICES – ONE TIME FEE 1. Services to include the design of a new logo in coordination with Customer 2. Customer may provide draft artwork for the new logo or request Contractor to design 3. Final Artwork must be approved by Customer prior to production 4. The customer may request a cap with the embroidery prior to production

IFB No. 304T-17-201A1.1 Exhibit E Page 2 of 2

IFB NO. 304T-17-201A1.1 CLOTHING ACCESSORIES Texas Parks and Wildlife Department (TPWD) Cap,6 Panel, Twill and Mesh EXHIBIT F

Line 17: Cap, 6 Panel, Twill and Mesh with Direct Embroidery Referenced Brand/Model Number or Equal: Cobra WM-6 Cap 1. Multi-Colors: a. Front Panels and Visor: Dark Green b. Back Panels: Khaki c. Squatchee: Khaki 2. Panels: Six 3. Fabric – Two Front Panels and Visor: Garment Washed Cotton Twill 4. Fabric – Four Back Panels: Soft Mesh 5. Structured Crown: a. Height: 3 ¼ inches b. Eyelets: Two on front panels in contrasting khaki colored thread 6. Visor: a. Topstitching: Four rows in contrasting khaki colored thread b. Contrasting Sandwich with khaki material c. Underside of Visor: Garment Washed Cotton Twill - Dark Green 7. Closure on Back: a. Hook and Loop b. Cotton Twill: Khaki 8. Direct Embroidery: a. TPWD logo and “Wildlife” with artwork to be provided by TPWD b. Stitching color for the TPWD logo shall be green (Pantone 341) and white c. Stitching color for the “Wildlife” shall be done in white. d. TPWD logo emblem and embroidered lettering shall be approximately 1 ¾ inch x 2 inches and shall be proportionate relative to the size of the corresponding cap. e. WILDLIFE shall be embroidered beneath the TPWD logo in block letters and relative to the size of the logo f. The customer may request a cap with the embroidery prior to production

Pictures for Informational Purposes Only:

IFB No. 304T-17-201A1.1 Exhibit F Page 1 of 1

IFB NO. 304T-17-201A1.1 CLOTHING ACCESSORIES Texas Parks and Wildlife Department (TPWD) Cap, 6 Panels, Heavy Canvas

EXHIBIT G

Line 18: Cap, 6 Panel, Heavy Canvas with Direct Embroidery Referenced Brand / Model Number or equal: Cobra TOF/Tough 1. Fabric: a. Heavy Canvas b. Water Repellant c. Stain Repellant d. Multi-Colors: Olive/Khaki a. Panels and Upper Visor: Olive b. Undervisor and Squatchee: Khaki 2. 6 Panel 3. Eyelets: Two Per Side 4. Crown: a. 3 ¼ inches b. Structured 5. Undervisor: Contrasting Khaki Color 6. Back Closure: a. Hook and Loop b. Color: Olive 7. Direct Embroidery: a. TPWD logo and “Wildlife” with artwork to be provided by TPWD b. Stitching color for the TPWD logo shall be green (Pantone 341) and white c. Stitching color for the “Wildlife” shall be done in white. d. TPWD logo emblem and embroidered lettering shall be approximately 1 ¾ inch x 2 inches and shall be proportionate relative to the size of the corresponding cap. e. WILDLIFE shall be embroidered beneath the TPWD logo in block letters and relative to the size of the logo f. The customer may request a cap with the embroidery prior to production

Pictures for Informational Purposes Only:

IFB No. 304T-17-201A1.1 Exhibit G Page 1 of 1