64th International Astronautical Congress 2013
(IAC 2013)
Beijing, China 23-27 September 2013
Volume 11 of 14
ISBN: 978-1-62993-909-4 VOLUME 11
IAC-13.D2.1.2 - THE FIRST FLIGHT OF JAPAN'S EPSILON LAUNCH VEHICLE 8242 Yasuhiro Morita
IAC-13.D2.1.3 - ARIANESPACE LAUNCHER FAMILY STATUS 8249 Denis Schmitt
IAC-13.D2.1.4 - STUDY ON PROPELLANT TECHNOLOGY OF LARGE SOLID BOOSTER 8261 Yanhiti Liang
IAC-13.D2.1.5 - ARIANE-5 MEA AFTER THE MINISTERIAL COUNCIL 2012 8269 Catherine Poincheval
IAC-13.D2.1.6 - ARIANE 6 THE FUTURE EUROPEAN LAUNCHER 8270 Sylvain Guedron
IAC-13.D2.1.7 - CURRENT STATUS OF JAPANESE FLAGSHIP LAUNCH VEHICLE, H-IIA AND H-IIB 8271 Takashi Noma
IAC-13.D2.1.8 - COMPLEX PROBLEM OF SYSTEM DESIGNING OF SPACE ROCKET SYSTEMS WITHIN THE INTERNATIONAL COOPERATION 8280 A. Kashanov IAC-13.D2.1.9 - THE COMMERCIAL COMPETITIVENESS OF THE ARIANE SME/6 LAUNCH VEHICLES 8294 Scott Fisher
IAC-13.D2.I.10 - NASA'S SPACE LAUNCH SYSTEM: MOVING TOWARD THE LAUNCH PAD 8308 Steve Creech
IAC-13.D2.I.U - SOLID ROCKET BOOSTER FOR NASA'S SPACE LAUNCH SYSTEM 8318 Donald Sauvageali
D2.2. LAUNCH SERVICES. MISSIONS, OPERATIONS AND FACILITIES
IAC-13.D2.2.1 (withdrawn) - ARIANE GROUND FACILITIES: BACKGROUND, OPERATIONAL PHASE AND FUTURE DEVELOPMENT N/A Pier Michele Roviera
IAC-13.D2.2.2 - LONG-TERM PREDICTION OF VOSTOCHNY COSMODROME DEVELOPMENT IN SUPPORT OF SPACE ACTIVITY OF RUSSIA AND INTERNATIONAL COOPERATION 8323 Alia Serikova
IAC-13.D2.2.3 - ROCKOT - THE AFFORDABLE LAUNCHER FOR SMALL SATELLITE CONSTELLATIONS 8329 Peter Freeborn
IAC-13.D2.2.4 - LAUNCH SERVICES PROGRAM MANAGEMENT: A LONG MARCH CASE 8334 Yuan Si
IAC-13.D2.2.5 - CYCLONE-4 SPACE LAUNCH SYSTEM: INNOVATIONS AND COMPETITIVE PRICING WITH IMPRESSIVE HERITAGE 8340 Sergiy Guchenkov
IAC-13.D2.2.6 - ADAPTION AND SEPARATION TECHNOLOGY OF MICRO-SATELLITE BASED ON QB50 PROJECT 8347 Rong Chen
IAC-13.D2.2.7 - A NEW OVERALL NETWORK ARCHITECTURE DESIGN FOR THE LAUNCH VEHICLE SYSTEM 8352 Weiqiang Xia
IAC-13.D2.2.8 - NEW ADVANCES OF CHINESE SPACE TRACKING SHIP 8357 Bo Cong
IAC-13.D2.2.9 - STUDY ON NUMERICAL CALCULATION METHOD FOR THE EXPLOSIVE FRAGMENTS IN INITIAL SEGMENT OF ROCKET LAUNCH 8362 Yang Liu
IAC-13.D2.2.10 - RESEARCH ON MECHANISM OF LAUNCH VEHICLE ELECTROSTATIC CHARGING AND ELECTROSTATIC PROTECTION 8363 Lijie Xti
IAC-13.D2.2.11 - CORROSION CONTROL IN THE LAUNCH ENVIRONMENT 8369 Lie Calle
D2.3. UPPER STAGES, SPACE TRANSFER, ENTRY AND LANDING SYSTEMS
IAC-13.D2.3.I - AEROTHERMODYNAMIC AND TPS DESIGN ANALYSIS OF THE USV3 RE-ENTRY VEHICLE 8370 Davide Cinquegrana
IAC-I3.D2.3.2 - ATV PROPULSION SYSTEM - WELCOME ON BOARD! HOW THE ATV MISSIONS' FEEDBACK AND REAL-TIME MONITORING HAVE BEEN MANAGED IN A CONTINUOUS IMPROVEMENT PROCESS 8383 Johann Henocque
IAC-13.D2.3.3 (withdrawn) - MISSION CONCEPT AND TECHNICAL SUBJECTS OF HTV-R (HTV- RETURN) N/A Yitsuke Suzuki
IAC-I3.D2.3.4 - CARAVAN CARGO AUTONOMOUS RENDEZVOUS AND VELOCITY ADJUSTMENT/NAVIGATION 8384 UdrivolfPica
IAC-I3.D2.3.5 (withdrawn) - A STUDY OF REENTRY BLACKOUT ALLEVIATION USING ELECTRON BUNCHING IN THE REENTRY PLASMA LAYER N/A Siddharth Krishnamoorthy
IAC-13.D2.3.6 - APPLIED MAGNETO-AERODYNAMICS FOR SAFER RE-ENTRY OF SPACE VEHICLE 8399 Aakash Chhunchha
IAC-I3.D2.3.7 (withdrawn) - AEROTHERMODYNAMICS OF AN OPTIMAL DESIGN OF MARS RE-ENTRY VEHICLE FROM HYPERSONIC TO SUBSONIC FLOW REGIME N/A Balbir Singh
IAC-13.D2.3.8 - MODELING AND ANALYZING OF THE SOFT-LANDING PHASE OF PARACHUTE- RETROROCKET SYSTEM 8403 Huang Wei
IAC-13.D2.3.9 - SCHEME DESIGN OF A PARACHUTE RECOVERY SYSTEM FOR UAV 8404 Liang Zeng IAC-13.D2.3.10 - DESIGN PHILOSOPHY FOR OTV OPERATING ON CRYOGENIC PROPELLANT COMPONENTS 8413 Dmitry Loupiak
IAC-13.D2.3.11 - SPACE LAUNCH SYSTEM EVOLVABILITY ASSESSMENT: UPPER STAGE DEFINITION 8414 Jon Holladay
D2.4. FUTURE SPACE TRANSPORTATION SYSTEMS
IAC-13.D2.4.1 - NELS - LAUNCHER CONCEPT SELECTION FOR THE "NEW EUROPEAN LAUNCH SERVICE" 8415 Marc Schepcr
IAC-13.D2.4.2 - ECONOMICAL SELF-SUSTAINABILITY OF A NEW EUROPEAN LAUNCH SERVICE (NELS) 8422 Piotr Perczynski
IAC-13.D2.4.3 - CONCEPTUAL DESIGN OF A SPACE TUG FOR SATELLITES MISSIONS SUPPORT 8423 Maria Antonietta Viscio
IAC-13.D2.4.4 - DESIGN PARAMETERS OPTIMISATION OF THE UNIFIED SERIES OF REUSABLE INTERORBITAL TUG WITH ELECTRICAL PROPULSIONS AND NUCLEAR POWER SYSTEM OF MEGAWATT CLASS IN NEAR EARTH TRANSPORT OPERATIONS FOR HEAVY PAYLOADS AND SATTELITE TRANSPORTATION TO F 8424 Dmitry Goropaev
IAC-13.D2.4.5 - PROGRESS OF SPACELINER ROCKET-POWERED HIGH-SPEED CONCEPT 8425 Martin Sippel
IAC-13.D2.4.6 - PROGRESS ON THE SKYLON AND SABRE 8427 Mark Hempsell
IAC-13.D2.4.8 - ANALYSIS OF EFFECTIVENESS OF UTILIZATION STRATEGY FOR SPACE LAUNCH VEHICLE WITH REUSABLE FIRST STAGE IN TURNAROUND SERVICING PHASE 8441 Alia Serikova
IAC-13.D2.4.9 - A CONCEPTUAL SCHEME OF REUSABLE SPACE TRANSPORTATION SYSTEM BASED ON AIR-BREATHING COMBINED PROPULSION 8446 Yingshan Xu
IAC-13.D2.4.10 - SYSTEM-DEFINED FLIGHT DEMONSTRATOR OF REENTRY LAUNCH VEHICLE' BLOCK WITHIN REUSABLE SPACE LAUNCH VEHICLE CONFIGURATION 8456 Anatoly Kuzin
IAC-13.D2.4.11 - THE AUSTRAL LAUNCH VEHICLE: REDUCING SPACE TRANSPORTATION COST THROUGH REUSABILITY, MODULARITY AND SIMPLICITY 8457 Adriaan Schutte
IAC-13.D2.4.12 - OPTIMUM MANEUVER OF AIR LAUNCH ROCKETS 8473 Masashi Miura
D2.5. FUTURE SPACE TRANSPORTATION SYSTEMS TECHNOLOGIES
IAC-13.D2.5.1 (withdrawn) - ESA FLPP SYSTEM DRIVEN TECHNOLOGY SELECTION FOR FUTURE EUROPEAN LAUNCH VEHICULES N/A Guy Ramusat
IAC-13.D2.5.2 - LONG DURATION CRYOGENIC PROPELLANT IN-SPACE STORAGE TECHNOLOGY 8474 Xiaowei Wang
IAC-13.D2.5.3 - DESIGN OF INTER TANK STRUCTURE FOR CRYO STAGE WITH A COMMON BULK HEAD 8478 R. Ramesh Kumar
IAC-13.D2.5.4 - OPTIMIZATION ANALYSIS OF SELF-PRESSURIZATION PROCESS FOR LIQUID OXYGEN TANK OF LIQUID ROCKET 8487 Zhenqi Miu
IAC-13.D2.5.5 - SYSTEM DESIGN AND TECHNICAL DEMONSTRATIONS FOR REUSABLE SOUNDING ROCKET 8494 Satoshi Nonaka
IAC-13.D2.5.6 (withdrawn) - STUDY ON REAL-TIME NETWORK FOR REUSABLE SOUNDING ROCKET N/A Takanori Narita
IAC-13.D2.5.7 - PROGNOSTICS AND HEALTH MANAGEMENT TECHNOLOGY OF LARGE LAUNCH VEHICLE 8502 Zhenliang Xu
IAC-13.D2.5.8 - CONCEPT OF MULTIPURPOSE ELECTROJET SPACE TUG CREATION 8505 A. Zaitseva
IAC-13.D2.5.9 - ANALYSIS OF THE AVIONIC SYSTEM ACHITECTURE FOR FUTURE MANNED REUSABLE LAUNCH VEHICLE 8507 Linna Wang IAC-13.D2.5.10 - PRECISE MARGINS TO OPERATIONAL LIMITS OF THE RACS TAKING INTO ACCOUNT THE PWM IMPLEMENTATION 8512 Keysmer Enrique Damo La Rosa
D2.6. FUTURE SPACE TRANSPORTATION SYSTEMS VERIFICATION AND IN-FLIGHT EXPERIMENTATION
IAC-13.D2.6.1 - THE IXV PROGRAMME: STATUS OF THE VEHICLE INTEGRATION AND MISSION PREPARATION 8513 Giorgio Tumino
IAC-13.D2.6.2 - ESA INTERMEDIATE EXPERIMENTAL VEHICLE SYSTEM SYNTHESIS TEST. DESIGN, VERIFICATION AND IMPLEMENTATION 8514 Giuseppe Rufolo
IAC-I3.D2.6.3 - CMC TECHNOLOGY FOR WINDWARD AND NOSE OF THE IXV VEHICLE : TOWARDS FULL-SCALE MANUFACTURING AND QUALIFICATION 8515 Thierry Pichon
IAC-13.D2.6.4 - FLIGHT ACCEPTANCE OF A VERY PERFORMANT, HIGH-RELIABLE COMPUTER FOR
THE ESA IXV RE-ENTRY VEHICLE - AN ELEMENTARY SUBSYSTEM FOR FUTURE SPACE TRANSPORTATION SYSTEMS 8525 Koen Puimege
IAC-I3.D2.6.5 - INTERMEDIATE EXPERIMENTAL VEHICLE, ESA PROGRAM EXTRAPOLATION GROUND TO FLIGHT WIND TUNNEL AND CFD APPROACH 8527 Jean-Pierre Tribot
IAC-13.D2.6.6 - RANS ANALYSIS OF THE TPS PROTUSIONS ON THE ESA IXV VEHICLE 8536
Pietro Catalano
IAC-I3.D2.6.7 - THE PRIDE PROGRAMME: FROM THE IXV TO THE ISV 8547 Giorgio Tumino
IAC-13.D2.6.8 - USV3 PROJECT VISION FOR A SPACE VEHICLE WITH AUTOMATIC RE-ENTRY AND LANDING CAPABILITY 8548 Camilla Richietlo
IAC-13.D2.6.9 - THE DEVELOPMENT OF THE SMALL SOUNDING ROCKET PROGRAM 8557 Adam Okninski
IAC-13.D2.6.10 - THE AERODYNAMIC DAMPING TEST OF ELASTIC LAUNCH VEHICLE MODEL IN TRANSONIC FLOW 8568 Chen Ji
IAC-13.D2.6.11 - A TRAJECTORY DESIGN METHOD FOR THE CROSS-DOMAIN FLIGHT OF TRANS ATMOSPHERIC VEHICLE 8572 Yongyuan Li
D2.7. SMALL LAUNCHERS: CONCEPTS AND OPERATIONS
IAC-13.D2.7.1 - FUTURE APPLICATIONS OF SMALL LAUNCHERS-A SECTOR WITH CONSIDERABLE OPPORTUNITIES 8577 Scott Fisher
IAC-13.D2.7.2 - THE DEVELOPMENT AND OPERATION OF AN AFFORDABLE AIR LAUNCHED NANOSATELLITE LAUNCH SYSTEM FOR THE US AND EUROPEAN MARKETS 8579 Charles Latter
IAC-13.D2.7.3 - SMALL LOW-COST LAUNCH VEHICLES: ENGINEERING AND BUSINESS BROAD ANALYSIS 8588 Pol Guixe Jove
IAC-13.D2.7.4 - CONCEPTUAL LAY-OUT OF A SMALL LAUNCHER W.R.T. TRANSIENT PHASES 8598 Marhts Ja'ger
IAC-13.D2.7.5 - FEASIBILITY STUDY OF SMALL SATELLITES LAUNCHER VEHICLE LAUNCHED FROM ATMOSPHERIC CARRIER AIRCRAFT 8599 Nicole Viola
IAC-13.D2.7.6 - NUMERICAL INVESTIGATIONS ON THE AERODYNAMICS OF SHEFEX-III LAUNCHER 8614 YiLi
IAC-13.D2.7.7 - THE INFINITE STAGING ROCKET-FIRST STEP TO REALIZATION 8624 Olga Motsyk
IAC-13.D2.7.8 - L3AR - A NEW AIR LAUNCH CONCEPT USING A DEDICATED AUTOMATIC CARRIER 8635 Nicolas Berend
IAC-13.D2.7.9 - SCHEMATA OF AVIATION-ROCKETRY SYSTEMS FOR SMALL SPACECRAFT LAUNCHES. OPPORTUNITIES FOR REALIZATION. ANALOGUES AND PROTOTYPES 8636 Sergey Shcherbak
IAC-13.D2.7.10 (withdrawn) - ROCKOON DEMONSTATION IN THE GRANCANARIA SPACEPORT FOR FEMTO-SATELLITES N/A Joshua Tristancho D2.9-D6.2. SOLUTIONS FOR HUMAN FLIGHTS IN CHINA
IAC-13.D2.9-D6.2.1 - HEAVY LAUNCH VEHICLE AND ITS APPLICATION 8637 Shuo Li
IAC-13.D2.9-D6.2.2 - ELEMENTS OF MANNED LAUNCH VEHICLE AND IMPLEMENT 8642 Mu Sun
IAC-13.D2.9-D6.2.3 - DOCKING MECHANISM AND DYNAMIC ANALYSIS OF EARTH-LUNAR ORBITAL TRANSFER STAGE 8646 Shengbao Wu
IAC-13.D2.9-D6.2.4 - RESEARCH ON PROCESSING OF SPACESUIT BY EMF 8654 Wenzhong Zhang
IAC-13.D2.9-D6.2.5 - THE MODAL TEST OF THE CZ-2F STRAP-ON LAUNCH VEHICLE 8655 Jianmin Wang
IAC-13.D2.9-D6.2.6 - IMPLEMENTATION AND RESEARCH ON THE PRINCIPLE TESTING PLATFORM BASED ON INTELLIGENT ICD FOR BUS REDUNDANCY CONTROL SYSTEM 8656 Zhekui Xin
IAC-13.D2.9-D6.2.7 - APPLICATION OF FRICTION STIR WELDING IN THE FIELD OF LAUNCH VEHICLE TANK MANUFACTURING 8661 Yanhua Zhao
IAC-13.D2.9-D6.2.8 - PROGRESS AND PROSPECT OF ADVANCED GUIDANCE AND CONTROL TECHNOLOGY FOR LAUNCH VEHICLE 8662 Cuoqiang Xu
IAC-13.D2.9-D6.2.9 - ATTITUDE DECOUPLING CONTROL FOR ROLLING SPACECRAFT 8669 Xiytian Huang
IAC-13.D2.9-D6.2.10 - LONGITUDINAL SEAM WELDING SYSTEM FOR LARGE LAUNCH VEHICLE 8678 Ting Zhao
IAC-13.D2.9-D6.2.11 - ANALYSIS ON TT&C SCHEME FOR THE LOWER ORBIT LONG-PLAYING FINAL- STAGE ROCKET 8693 Xiaoding Wang
D2.P. POSTER SESSION
IAC-13.D2.P.I - EXPERIMENTAL STUDY ON THE HIGH-PRESSURE GAS FLOW PERFORMANCE OF ORIFICE PLATES USED IN THE ROCKET PROPELLANT PRESSURIZATION SYSTEM 8700 Qiang Li
IAC-I3.D2.P.2 - VISUALIZATION TECHNOLOGY OF NUMERICAL SIMULATION FOR LAUNCH VEHICLE DURING FLIGHT 8706 Zhenhai Wanyan
IAC-13.D2.P.3 - A POSSIBILITY BASED MISSION DESIGN OPTIMIZATION FOR THE SPACE LAUNCH VEHICLE 8710 Jung-ll Shu
IAC-13.D2.P.4 - EXPERIMENTAL RESEARCH ON SIMULATION OF ROCKETS TAKEOFF 8717 Fuyou Huang
IAC-13.D2.P.5 - A NEW OPTICS AND RADAR STRAP-DOWN MEASURING SYSTEM 8741 Jiahong Chen
IAC-13.D2.P.6 - RESEARCH ON FAST TESTING METHOS OF LAUNCH VEHICLE 8749 Ziyu Wang
IAC-13.D2.P.7 - ADAPTIVE FAULT-TOLERANT CONTROL SYSTEM OF REUSABLE LAUNCH VEHICLE 8755
Yu Han
IAC-13.D2.P.8 - DEVELOPMENT OF A LINEAR SWEEPING FREQUENCY PRESSURE GENERATOR FOR DYNAMIC PRESSURE CALIBRATION 8762 Dayott Zhang
IAC-13.D2.P.9 - WATER SUPPRESSION TEST ON JET NOISE 8766 Jinsong Chen
IAC-13.D2.P.10 - STABLE TRACKING OF NARROW-BEAM INSTRUMENTATION RADAR OF SPACE TRACKING SHIP 8772 Yuanxin Qu
IAC-13.D2.P.11 - AN ANALYTICAL FOR THE DESIGNING OF GENERAL ASSEMBLY-TEST BUILDING OF SPACECRAFT LAUNCH SITE 8776 Xian Feng
IAC-13.D2.P.12 - THE ANALYSIS ABOUT THE DEVELOPING APPROACHES OF TECHNOLOGIES OF SAFELY RECYCLING AND REUSING LAUNCH VEHICLE CORE STAGES AND ROCKET BOOSTERS 8780 Xianyang Shang
IAC-13.D2.P.13 - AERODYNAMIC ANALYSIS OF THE USV3 VEHICLE FROM HYPERSONIC TO LANDING FLIGHT CONDITIONS 8787 Francesco Petrosino
IAC-13.D2.P.14 - ORBITAL TRANSFER TRANSPORT SYSTEM BASE ON UPPER STAGE TECHNOLOGY 8797 Xubin Zhang IAC-13.D2.P.15 - MULTI-DISCIPLINARY DESIGN AND TRAJECTORY OPTIMISATION OF A SINGLE- STAGE-TO-ORBIT VEHICLE 8800 Fabrizio Pescetelli
IAC-13.D2.P.16 - FEASIBILITY STUDY OF SPACECRAFT CLUSTER LAUNCHES WITH ONE LAUNCH VEHICLE INTO VARIOUS BASIC ORBITS 8801 Igor Mashtak
IAC-13.D2.P.17 - ROCKOON LEEM PROJECT 8802 Daniel Pastor Moreno
IAC-13.D2.P.18 - A FRAMEWORK FOR INTEGRATING DIFFERENT SPACE LAUNCH CONCEPTS FOR EFFICIENT SPACE LAUNCH OPERATIONS 8803 Seyed AH Nasseri
IAC-I3.D2.P.19 - THE SOLUTION OF FUTURE SPACE TRANSPORT—THE PATENT ANALYSIS OF 3DP TECHNOLOGY APPLICATION IN AEROSPACE 8804 Feng Li
IAC-13.D2.P.20 - AEROTHERMODYNAMICS OF ROUND LEADING EDGE AIRFOIL WITH A FLOW- THROUGH DUCT AT HYPERSONIC SPEED 8809 Rajesh Yadav
IAC-13.D2.P.21 - VACUUM MAGLEV - A GREENER AND SUSTAINABLE SPACE TRANSPORT SYSTEM THAT COULD KICK-START FURTHER INTERNATIONAL COLLABORATION 8810 Tanay Sharma
IAC-13.D2.P.22 - RESEARCH ON THE INTEGRATION OF SMALL LAUNCH VEHICLE AND SMALL SATELLITE PLATFORM 8824 Changwei Hit
IAC-13.D2.P.23 - A BALLOON BASED LAUNCH SYSTEM FOR MICRO/NANO/PICO-SATELLITES 8832 Seyed Ali Nasseri
IAC-13.D2.P.24 - THE CONTROL SYSTEM SIMULATION OF NEW LAUNCH VEHICLE BASED ON HLA 8833 Gliangping Qi
IAC-13.D2.P.25 - MANNED LUNAR LAUNCHING MODE AND THE REQUIREMENT FOR HEAVY LAUNCH VEHICLE 8837 Wenqing Li
IAC-13.D2.P.26 - STUDY OF A NEW AEROSPACE VEHICLE PROJECT BASED ON TURBINE-BASED COMBINED CYCLE ENGINE 8842 Xin Xn
D3. SYMPOSIUM ON BUILDING BLOCKS FOR FUTURE SPACE EXPLORATION AND DEVELOPMENT
D3.1. STRATEGIES & ARCHITECTURES AS THE FRAMEWORK FOR FUTURE BUILDING BLOCKS IN SPACE EXPLORATION AND DEVELOPMENT
IAC-13.D3.1.1 - A COMMON FRAMEWORK FOR CONTEXTUALIZING SPACE EXPLORATION STRATEGIES 8850 G Ryan Faith
IAC-13.D3.1.2 - POTENTIAL EUROPEAN CONTRIBUTIONS TO INTERNATIONAL EXPLORATION SCENARIOS 8858 Bernd Bischof
IAC-13.D3.1.3 - BUILDING BLOCK ELEMENTS AND ENABLING TECHNOLOGIES FOR EXPLORATION 8866 Maria Antonietta Perino
- IAC-13.D3.1.4 SELF-DEPLOYABLE HABITAT FOR EXTREME ENVIRONMENTS (SHEE) - AN INVESTIGATION OF DESIGN AND CONSTRUCTION PRINCIPLES 8877 Ondrej Douie
IAC-13.D3.1.5 - DEPENDENCY NETWORK ANALYSIS: FOSTERING THE FUTURE OF SPACE WITH NEW TOOLS AND TECHNIQUES IN SPACE SYSTEMS-OF-SYSTEMS DESIGN AND ARCHITECTURE 8886 Cesare Gaariniello
IAC-13.D3.1.6 - PANORAMA OF IDEAS ON STRUCTURES AND MATERIALS FOR THE DESIGN OF A MULTI-MODULAR MANNED SPACE STATION LOCATED AT EML2 8899 Stephanie Lizy-Destrez
IAC-13.D3.1.7 - SHACKLETON ENERGY ENABLING INFRASTRUCTURE FOR SOLAR SYSTEM INDUSTRIALIZATION 8914 Jim Keravala
IAC-13.D3.1.8 - SPACE STATION 2.0: A PUBLIC-PRIVATE MODEL FOR INTERNATIONAL SPACE EXPLORATION 8915 Josh Berk
IAC-13.D3.1.9 (withdrawn) - INTERSTELLAR RANGE SPACECRAFT PROPULSION AND AUTONOMOUS SYSTEMS ANALYSIS FOR INTERSTELLAR EXPLORATION WITH MULTI-GENERATIONAL SPACECRAFT N/A Ugur Guven IAC-13.D3.1.10 (withdrawn) - INNOVATIONS IN UP GRADATION IN INFRASTRUCTURE OF SPACE CRAFTS FOR LONG SPACE MISSIONS ON NEO/EXOPLANET N/A Ankita Vashishtha
D3.2. SYSTEMS AND INFRASTRUCTURES TO IMPLEMENT FUTURE BUILDING BLOCKS IN SPACE EXPLORATION AND DEVELOPMENT
IAC-13.D3.2.1 - ADVANTAGES AND CAPABILITIES OF AN IN-SPACE NAVIGATION INFRASTRUCTURE IN MOON AND MARS MISSIONS 8919 Giovanni B. Palmerini
IAC-13.D3.2.2 - TECHNOLOGY DEVELOPMENT FOR ENABLING IN-SPACE INFRASTRUCTURE 8925 Christopher Moore
IAC-13.D3.2.3 - IMPROVING COMMUNICATION FOR SPACE EXPLORATION MISSIONS TO MARS 8931 Maria Victoria Alonsoperez
IAC-13.D3.2.4 - CONCEPT FOR A MOON AND ASTEROID SAMPLE RETURN FACILITY 8937 Lucy Berthoud
IAC-13.D3.2.5 - TYCHO: DEMONSTRATOR AND OPERATIONAL SATELLITE MISSION TO EARTH- MOON-LIBRATION POINT EML-4 FOR COMMUNICATION RELAY PROVISION AS A SERVICE 8947 Andreas Hornig
IAC-13.D3.2.6 - DEVELOPING EXPLORATION KEY TECHNOLOGIES FOR IN-ORBIT VALIDATION: THE STEPS2 PROJECT 8958 Maria Antonietta Perino
IAC-13.D3.2.7 - ADVANCED AND COST EFFECTIVE WASTE DISPOSAL AND TREATMENT METHODS FOR SPACE STATIONS 8966 Ugiir Guven
IAC-13.D3.2.8 - LEAST-SQUARES-BASED REACTIONLESS CAPTURE OF A TUMBLING TARGET WITH A SPACE MANIPULATOR 8967 Silvio Cocuzza
IAC-13.D3.2.9 - AN EFFICIENT BIONIC-BASED STRATEGY FOR SPACE STATIONS MANUFACTURING & ASSEMBLY PROCESS 8968 Mohammad Hadi Shariati Qalehnou
IAC-13.D3.2.10 - REACTION CONTROL OF FLEXIBLE JOINT SPACE MANIPULATORS 8969 Silvio Cocuzza
IAC-13.D3.2.11 - NONSINGULAR FUZZY TERMINAL SLIDING MODE CONTROL BASED ON SINGULAR SUPPRESSION AND ELASTIC VIBRATION SUPPRESSING OF FREE-FLOATING SPACE ROBOT WITH FLEXIBLE JOINTS 8970 Jie Liang
D3.3. NOVEL CONCEPTS AND TECHNOLOGIES FOR ENABLE FUTURE BUILDING BLOCKS IN SPACE EXPLORATION AND DEVELOPMENT
IAC-13.D3.3.1 - 3D PRINTING ON ISS: REDUCING EARTH DEPENDENCY AND OPENING NEW SPACE BASED MARKETS 8976 Jason Dunn
IAC-13.D3.3.2 - A STUDY ON GEOPHYSICAL EXPLORATION STRATEGIES TOWARDS MINING ASTEROIDS 8981 Sebastian M. Ernst
IAC-13.D3.3.3 - CONCEPT FOR ON ORBIT SERVICEABLE SPACECRAFT BUILDING BLOCKS - MECHANICAL INTERFACE 8989 Thomas A. Schervan
IAC-13.D3.3.4 - INCREASED PERFORMANCE REACTION CONTROL IN THE OPERATIONS OF HYPER- REDUNDANT SPACE MANIPULATORS 8990 Silvio Cocuzza
IAC-13.D3.3.5 (withdrawn) - SERVICABLE SATELLITES - A SOLUTION FOR IMPLEMENTING SUSTAINABILITY IN SPACE N/A Jana Weise
IAC-13.D3.3.6 - DEVELOPING SPACESUIT COMPATIBLE GEOLOGIC FIELD EQUIPMENT FOR TESTING IN A MARS ANALOG ENVIRONMENT 8991 April Davis
IAC-13.D3.3.7 (withdrawn) - THE SPACE TUGS: AN AFFORDABLE AND FEASIBLE ASTEROID DEFLECTION SYSTEM N/A Andre Caminoa
- IAC-13.D3.3.8 (withdrawn) - ATRM: AIRBORNE TITAN RECONNAISSANCE MISSION A TITAN AIRPLANE MISSION CONCEPT N/A Rohan M Ganapathy
IAC-13.D3.3.9 - WELDING IN SPACE: A COMPARATIVE EVALUATION OF CANDIDATE WELDING TECHNOLOGIES AND LESSONS LEARNED FROM ON-ORBIT EXPERIMENTS 8992 Trade Prater IAC-13.D3.3.10 - USING MARTIAN CLIMATE MODELS TO ASSESS THE POTENTIAL OF ARTIFICIAL GREENHOUSE GASES TO INCREASE MARTIAN SURFACE TEMPERATURES 9012 Isabelle Dicaire
IAC-13.D3.3.11 - RESEARCH ON THE APPLICATION OF PHASE DIVERSITY TO LARGE APERTURE SPACE CAMERA 9019 Xin Wang
IAC-13.D3.3.12 - PRODUCE SPACE SOFTWARE FROM SOFTWARE FACTORY 9025 Xinhua Zheng
D3.4. SPACE TECHNOLOGY AND SYSTEM MANAGEMENT PRACTICES AND TOOLS
IAC-13.D3.4.1 - ADVANCED CONCEPTS STUDIES AS A TOOL FOR STRATEGIC PLANNING: A RETROSPECTIVE AND PROSPECTIVE VIEW 9031 John C. Munkins
IAC-I3.D3.4.2 - WHICH IS BETTER: PUTTING MANY EGGS INTO FEWER BASKETS OR FEWER EGGS INTO MANY BASKETS? A MODELING APPROACH TO EVALUATING SPACE RESEARCH AND DEVELOPMENT RESOURCE ALLOCATION 9032 Alexander Burg
IAC-13.D3.4.3 - CLOSER 9036 Chrishma Singh-Derewa
IAC-13.D3.4.4 - SELECTION AND EXPLOITATION OF 3D PRINTING TECHNOLOGY TO ENABLE ON¬ BOARD MANUFACTURING CAPABILITY ON THE ISS: USING SCENARIO PLANNING FOR DEVELOPING REQUIREMENTS 9048 Angeliki Kapoglau
IAC-13.D3.4.5 (withdrawn) - FULL CYCLE ENGINEERING TOOL FOR LOW-COST UNMANNED RESPONSIVE SPACE MISSIONS N/A Joshua Trislancho
IAC-13.D3.4.6 - MDO TECHNIQUES INTEGRATED WITH SYSTEM MODELING FRAMEWORK: MBSE METHODOLOGIES APPLIED TO SPACE SYSTEM DESIGN AND ANALYSIS 9049 Michele Cencelli
" IAC-13.D3.4.7 (withdrawn) - THE NEW ISO STANDARD DEFINITION OF THE TECHNOLOGY READINESS LEVELS (TRL) AND THEIR CRITERIA OF ASSESSMENT" N/A Franck Durand-Carrier
IAC-13.D3.4.8 - APPLICATION OF TECHNOLOGY READINESS LEVELS (TRLS) IN CHINA AEROSPACE PROJECTS 9060 Yu Liu
IAC-13.D3.4.9 - FEDERATED SATELLITE SYSTEMS: A CASE STUDY ON SUSTAINABILITY ENHANCEMENT OF SPACE EXPLORATION SYSTEMS ARCHITECTURES 9063 Alessandro Golkar
VOLUME 12