Scotchman General Catalog

5014 TM WITH CONVEYOR CPO 350 LT

FH 1016 ADVANCED MEASURING SYSTEMS

1 Porta Fab 45 Standard Features • 45-ton punch station (1-1/8” in 1/2”) • Keyed punch ram for safety

IRON W OR K ER S • 4-1/4” throat depth • 2” die holder • Punch nut with wrench and stripper • One round punch & die: max. diameter 1” • Adjustable electric stroke control with scale • Three-in-one combination tool Angle shear capacity: 3” x 3” x 5/16” at 90° and 2” x 2” x 1/4” at 45° Bar shear capacity: 3/8” x 6” Rod shear capacity: 3/4” round • Tool table work area • Machine stand with punch & die & tooling storage rack • 110 volt / 1-ph electrics • All guards necessary to comply with ANSI B 11-5 standards • One-year warranty • Made in the USA

Capacities and Specifications Rated On: A36 Mild Steel / 65,000 psi Tensile

Punching Capacity 45 ton (41 mt) Square Tube Shear 1/2” to 1”, 12 gauge 1-1/8” in 1/2” (28 mm in 12 mm) (12 to 25 mm, 2.75 mm)

Special Tooling 2-1/4” Max. Dia. (57 mm Max. Dia.) Picket Tool 1/2”, 3/4” & 1” (12 mm, 19 mm, 25 mm) 16 gauge (1.6 mm) Throat Depth 4-1/4” (108 mm) Strokes per minute 20 spm (1/4” stroke) [Punch Station] Flat Bar Shear 6” Length (150 mm) in light material 1/2” x 4” (12 x 100 mm) 3/8” x 6” (10 x 150 mm) Strokes per minute 6 spm (3/4” stroke) [Punch Station] in heavy material Angle Shear 90° 3” x 3” x 5/16” (75 x 75 x 8 mm) Angle Shear 45° 2” x 2” x 1/4” (50 x 50 x 6 mm) Hydraulics 2,500 psi (172 bar) Round Rod 3/4” (20 mm) Motor Standard 2 hp 1 ph (1.49 kW) Brake 8” 25 ton (23 mt) 110 v Brake 12” 20 ton (18 mt) Motor Optional 2 hp 1 ph (1.49 kW) Pipe Notcher 3/4”, 1”, (20 mm, 25 mm) 220 v Schedule 40 1-1/4” (32 mm) 1-1/2”, 2” (38 mm, 50 mm) Dimensions W-17.63” (45 cm) L-35.75” (91 cm) Rectangle Notcher 2” x 1-3/4” x 1/4” (50 x 45 x 6 mm) H-38.75” (98 cm)

90° V-Notcher 6” x 6” x 1/8” (150 x 150 x 3 mm) Weight 640 lbs. (290 kg)

Rod Shear Round Rod (Max.) 1/4” to 1”, 5 Cavity (6 mm to 25 mm) Square Rod (Max.) 1/4” to 3/4”, 1 Cavity (6 mm to 18 mm)

2 IRON W OR K ER S Optional Standard Tooling Porta Fab 45

6” Brake 8” Brake 12” Brake Pipe Notcher

Rectangle Notcher 90˚ V-Notcher Rod Shear Tube Shear

30” Material Stop Picket Tool Punch Slug Receptacle Brake Length Gauge with Scale 8” & 12” Brakes

Brake Table with Scale & Squaring Arm 12” Brake Only

3 5014-CM Standard Features • 50-ton punch station (1-1/4” in 1/2”) • Keyed punch ram for safety

IRON W OR K ER S • 6” throat depth • 2” die holder • Punch nut with wrench & stripper • One round punch & die: max. diameter 1” • Adjustable stroke control • Angle shear capacity: 4” x 4” x 3/8” at 90° and 2” x 2” x 3/8” at 45° • 14” flat bar shear with 4-way reversible blade • Tool table work area • Electrical box supplied with emergency palm button and lock-out tag-out accommodations • 230/460 Volt / 3-ph electrics (must specify voltage) • All guards necessary to comply with ANSI B 11-5 standards • Forklift accommodations • One-year warranty • Made in the USA

Capacities and Specifications Rated On: A36 Mild Steel / 65,000 psi Tensile

Special Tooling 2-1/4” Max. Dia. (57 mm Max. Dia.) Square Tube Shear 1/2” to 1”, 12 gauge (12 x 25, 2.75 mm)

Throat Depth 6” (150 mm) Picket Tool 1/2”, 3/4” & 1” (12 mm, 19 mm, 25 mm) 16 gauge (1.6 mm) Flat Bar Shear 14” Length (350 mm) 3/4” x 4” (18 x 100 mm) Strokes per minute 40 spm (1/4” stroke) [Punch Station] 1/2” x 8” (12 x 200 mm) in light material 3/8” x 10” (10 x 250 mm) 1/4” x 14” (6 x 350 mm) Strokes per minute 17 spm (3/4” stroke) [Punch Station] in heavy material Opt. Sabre Blade 3/4” x 4” (18 x 100 mm) 1/2” x 10” (12 x 250 mm) Hydraulics 2,100 psi (145 bar) 3/8” x 12” (10 x 300 mm) 1/4” x 14” (6 x 350 mm) Motor Standard 3 hp 3 ph (2.24 kW) 230/460 Angle Shear 90° 4” x 4” x 3/8” (100 x 100 x 10 mm) 208/380/575 Angle Shear 45° 2” x 2” x 3/8” (50 x 50 x 10 mm) Motor Optional 5 hp 1 ph (3.73 kW) Brake 8” 30 ton (27 mt) 220 v Brake 12” 25 ton (23 mt) Dimensions W-29” (74 cm) Pipe Notcher 3/4”, 1” (19 mm, 25 mm) L-47” (119 cm) Schedule 40 1-1/4” (32 mm) H-59” (150 cm) 1-1/2”, 2” (38 mm, 50 mm) Weight 1,275 lbs. (580 kg) Rectangle Notcher 2” x 1-3/4” x 1/4” (50 x 44 x 6 mm) 90° V-Notcher 6” x 6” x 1/8” (150 x 150 x 3 mm) 4 3” x 3” x 1/4” (75 x 75 x 6 mm) IRON W OR K ER S 5014-TM Standard Features • 50-ton punch station with 3-station revolving turret (1-1/4” in 1/2”) • Keyed punch ram for safety • 4” throat depth • Three 2” die holders, three punch nuts with wrench and three strippers • One round punch & die: max. diameter 1” • Adjustable stroke control • Angle shear: 4” x 4” x 3/8” at 90° and 2” x 2” x 3/8” at 45° • 14” flat bar shear with 4-way reversible blade • Rectangle notcher, 2-1/2” x 2-3/4” x 3/8” • Tool table work area • Electrical box supplied with emergency palm button and lock-out tag-out accommodations • 230/460 volt / 3-ph electrics (must specify voltage) • All guards necessary to comply with ANSI B 11-5 standards • Forklift accommodations • One-year warranty • Made in the USA

Capacities and Specifications Rated On: A36 Mild Steel / 65,000 psi Tensile

Punching Capacity 50 ton (45 mt) Rod Shear 1-1/4” in 1/2” (32 mm in 12 mm) Round Rod (Max.) 1/4” to 1”, 5 Cavity (6 mm to 25 mm) 13/16” in 3/4” (21 mm in 18 mm) Square Rod (Max.) 1/4” to 3/4”, 1 Cavity (6 mm to 18 mm) Special Tooling 2-1/4” Max. Dia. (57 mm Max. Dia.) Square Tube Shear 1/2” to 1”, 12 gauge (12 mm to 25 mm, 2.75 mm)

Throat Depth 4” (100 mm) Picket Tool 1/2”, 3/4” & 1” (12 mm, 19 mm, 25 mm) 16 gauge (1.6 mm) Flat Bar Shear 14” Length (350 mm) 3/4” x 4” (18 x 100 mm) Strokes per minute 40 spm (1/4” stroke) [Punch Station] 1/2” x 8” (12 x 200 mm) in light material 3/8” x 10” (10 x 250 mm) 1/4” x 14” (6 x 350 mm) Strokes per minute 17 spm (3/4” stroke) [Punch Station] in heavy material Opt. Sabre Blade 3/4” x 4” (18 x 100 mm) 1/2” x 10” (12 x 250 mm) Hydraulics 2,100 psi (145 bar) 3/8” x 12” (10 x 300 mm) 1/4” x 14” (6 x 350 mm) Motor Standard 3 hp 3 ph (2.24 kW) 230/460 Angle Shear 90° 4” x 4” x 3/8” (100 x 100 x 10 mm) 208/380/575 Angle Shear 45° 2” x 2” x 3/8” (50 x 50 x 10 mm) Motor Optional 5 hp 1 ph (3.73 kW) Brake 8” 25 ton (23 mt) 220 v Brake 12” 25 ton (23 mt) Dimensions W-29” (74 cm) Pipe Notcher 3/4”, 1” (19 mm, 25 mm) L-48” (122 cm) Schedule 40 1-1/4” (32 mm) H-67” (170 cm) 1-1/2”, 2” (38 mm, 50 mm) Weight 1,575 lbs. (715 kg) Rectangle Notcher 2-1/2” x 3” x 5/16” (62 x 75 x 8 mm) 2-1/2” x 2-3/4” x 3/8” (62 x 69 x 10 mm) 90° V-Notcher 6” x 6” x 1/8” (150 x 150 x 3 mm) 3” x 3” x 1/4” (75 x 75 x 6 mm) 5 Optional Standard Tooling 5014-CM, 5014-TM IRON W OR K ER S

6” Brake 8” Brake 12” Brake Pipe Notcher Rectangle Notcher

90˚ V-Notcher Rod Shear Tube Shear Picket Tool Punch Slug Receptacle Brake Length Gauge with Scale 8” & 12” Brakes

Punch Gauging Table with Fence & Scale 5014-CM Shear Table with Miter Fence

Brake Table with Scale & Squaring Arm 12” Brake Only

48” Back Gauge Multi-Loc Punch Gauging Table 40” or 90” extensions available 5014 CM ONLY Conveyor Attachments & Supports 5014-CM, 5014-TM

14” x 5’ conveyor with angle iron support attached to 5014-TM

6 IRON W OR K ER S 6509-24M Standard Features • 65-ton punch station (1-1/16” in 3/4”) • Keyed punch ram for safety • 9” throat depth • Punch gauging table w/fence and scale • Die holder complete with 2” die insert • Punch nut with wrench and stripper • One round punch & die: max. diameter 1-1/4” • Punch jog control • Adjustable electric stroke control with scale • Electric remote foot pedal • 24” flat bar shear with 4-way reversible blade • Shear table with miter fence • Angle shear capacity at 90°: 6” x 6” x 3/8” and 5” x 5” x 1/2” • Tool table work area • Two-stage hydraulic pump • Electrical box supplied with emergency palm button and lock-out tag-out accommodations • 230/460 volt / 3-ph electrics Brake Length Gauge (must specify voltage) with Scale • All guards necessary to comply with 8” & 12” Brakes ANSI B 11-5 standards • Forklift accommodations • One-year warranty • Made in the USA

Capacities and Specifications Rated On: A36 Mild Steel / 65,000 psi Tensile

Punching Capacity 65 ton (58 mt) Channel Shear 2” to 5” adj. (50 mm to 125 mm adj.) 1-1/16” in 3/4” (27 mm in 18 mm) Rod Shear Special Tooling 4” Max. Dia. (100 mm Max. Dia.) Round Rod (Max.) 1/4” to 1-1/4”, 9 Cavity (6 mm to 32 mm) Square Rod (Max.) 1/4” to 1”, 1 Cavity (6 mm to 25 mm) Throat Depth 9” (225 mm) Square Tube Shear 1/2” to 2”, 12 gauge (12 mm to 50 mm, 2.75 mm) Flat Bar Shear 24” Length (600 mm) 1” x 6” (25 x 150 mm) Picket Tool 1/2”, 3/4” & 1” (12 mm, 19 mm, 25 mm) 3/4” x 10” (18 x 250 mm) 16 gauge (1.6 mm) 1/2” x 12” (12 x 300 mm) 3/8” x 16” (10 x 400 mm) Offset Die Holder Max. 40 ton (36 mt ) 1/4” x 24” (6 x 600 mm) Strokes per minute 40 spm (1/4” stroke) [Punch Station] Opt. Sabre Blade 1” x 6” (25 x 150 mm) in light material 1/2” x 16” (12 x 400 mm) Strokes per minute 17 spm (3/4” stroke) [Punch Station] Angle Shear 90° 6” x 6” x 3/8” (150 x 150 x 10 mm) in heavy material 5” x 5” x 1/2” (125 x 125 x 12 mm) Angle Shear 45° 3” x 3” x 3/8” (75 x 75 x 10 mm) Hydraulics 2,600 psi (183 bar) (with Bar Shear) 4” x 4” x 1/2” (100 x 100 x 12 mm) Motor Standard 5 hp 3 ph (3.73 kW) Brake 12” 40 ton (36 mt) 230/460 Brake 24” 30 ton (27 mt) 208/380/575 Open End Brake Max. 1/4” x 6” Flat or (6 x 150 mm) Motor Optional 5 hp 1 ph (3.73 kW) Angle Iron 230 v Pipe Notcher 3/4”, 1” (19 mm, 25 mm) Dimensions W-24” (57 cm) Schedule 40 1-1/4” (32 mm) L-60” (152 cm) 1-1/2”, 2” (38 mm, 50 mm) H-66” (168 cm) Rectangle Notcher 2” x 2-1/2” x 3/8” (50 x 65 x 10 mm) Weight 2,750 lbs. (1,250 kg) 90° V. Notcher 6” x 6” x 5/16” (150 x 150 x 8 mm) 7 9012-24M Standard Features • 90-ton punch station (1-1/8” in 1”) • Keyed punch ram for safety

IRON W OR K ER S • 12” throat depth • Punch gauging table with fence and scale • Die holder complete with 2” die insert • Punch nut with wrench & stripper • One round punch & die: max. diameter 1-1/4” • Punch jog control • Adjustable electric stroke control with scale • Electric remote foot pedal • Angle shear capacity: 6” x 6” x 1/2” at 90° • 24” flat bar shear with 4-way reversible blade • Shear table with miter fence • Tool table work area • Two-stage hydraulic pump • Electrical box supplied with emergency palm button and lock-out tag-out accommodations • 230/460 volt / 3-ph electrics (must specify voltage) • All guards necessary to comply with ANSI B 11-5 standards • Forklift accommodations • One-year warranty • Made in the USA

Capacities and Specifications Rated On: A36 Mild Steel / 65,000 psi Tensile

Punching Capacity 90 ton (80 mt) Channel Shear 2” to 6” adj. (50 mm to 150 mm adj.) 1-1/8” in 1” (27 mm in 25 mm) Rod Shear Special Tooling 4” Max. Dia. (100 mm Max. Dia.) Round Rod (Max.) 1/4” to 1-1/4”, 9 Cavity (6 mm to 32 mm) Square Rod (Max.) 1/4” to 1”, 1 Cavity (6 mm to 25 mm) Throat Depth 12” (300 mm) Square Tube Shear 1/2” to 2”, 12 gauge (12 mm to 50 mm, 2.75 mm) Flat Bar Shear 24” Length (600 mm) 1” x 8” (25 mm x 200 mm) Picket Tool 1/2”, 3/4” & 1” (12 mm, 19 mm, 25 mm) 3/4” x 12” (18 x 300 mm) 16 gauge (1.6 mm) 1/2” x 16” (12 x 400 mm) 1/4” x 24” (6 x 600 mm) Offset Die Holder Max. 40 ton (36 mt)

Opt. Sabre Blade 1/2” x 22” (12 x 550 mm) Strokes per minute 37 spm (1/4” stroke) [Punch Station] 3/8” x 24” (10 x 600 mm) in light material

Angle Shear 90° 6” x 6” x 1/2” (150 x 150 x 12 mm) Strokes per minute 24 spm (3/4” stroke) [Punch Station] Angle Shear 45° 3” x 3” x 3/8” (75 x 75 x 10 mm) in heavy material (with Bar Shear) 4” x 4” x 1/2” (100 x 100 x 12 mm) Hydraulics 2,600 psi (183 bar) Brake 12” 50 ton (45 mt) Brake 24” 40 ton (36 mt) Motor Standard 5 hp 3 ph (3.73 kW) 230/240 Open End Brake Max. 1/4” x 6” Flat or (6 x 150 mm) 208/380/575 Angle Iron Motor Optional 5 hp 1 ph (3.73 kW) Pipe Notcher 3/4”, 1” (20 mm, 25 mm) 230 v Schedule 40 1-1/4” (32 mm) 1-1/2”, 2” (38 mm, 50 mm) Dimensions W-26” (66 cm) L-76” (193 cm) Rectangle Notcher 2” x 2-1/2” x 3/8” (50 x 65 x 10 mm) H-70” (177 cm)

90° V-Notcher 6” x 6” x 5/16” (150 x 150 x 8 mm) Weight 3,900 lbs. (1,770 kg) 8 IRON W OR K ER S 12012-24M Standard Features • 120-ton punch station (1-1/2” in 1”) • Keyed punch ram for safety • 12” throat depth • Punch gauging table with fence and scale • Die holder complete with 2” and 2-1/2” die inserts • #40 and #45 punch nuts with wrench & stripper • One round punch & die: max. diameter 1-1/4” • Punch jog control • Electric adjustable stroke control with scale • Electric remote foot pedal • Angle shear capacity 6” x 6” x 1/2” at 90° • 24” flat bar shear with 4-way reversible blade • Shear table with miter fence • Tool table work area • Two-stage hydraulic pump • Electrical box supplied with emergency palm button and lock-out tag-out accommodations • 230/460 volt /3-ph electrics (must specify voltage) • All guards necessary to comply with ANSI B-11 5 standards • Forklift accommodations • One year warranty • Made in the USA

Capacities and Specifications Rated On: A36 Mild Steel / 65,000 psi Tensile

Punching Capacity 120 ton (108 mt) Rod Shear 1-1/2” in 1” (38 mm in 25 mm) Round Rod (Max.) 1/4” to 1-1/4”, 9 Cavity (6 mm to 32 mm) Square Rod (Max.) 1/4” to 1”, 1 Cavity (6 mm to 25 mm) Special Tooling 4” Max. Dia. (100 mm Max. Dia.) Square Tube Shear 1/2” to 2”, 12 gauge (12 mm to 50 mm, 2.75 mm) Throat Depth 12” (300 mm) Picket Tool 1/2”, 3/4” & 1” (13 mm, 19 mm, 25 mm) Flat Bar Shear 24” Length (600 mm) 16 gauge (1.6 mm) 1” x 12” (25 x 300 mm) 3/4” x 20” (18 x 500 mm) Offset Die Holder Max. 40 ton (36 mt) 1/2” x 24” (12 x 600 mm) Strokes per minute 37 spm (1/4” stroke) [Punch Station] Angle Shear 90° 6” x 6” x 1/2” (150 x 150 x 12 mm) in light material Angle Shear 45° 3” x 3” x 3/8” (75 x 75 x 10 mm) (with Bar Shear) 4” x 4” x 1/2” (100 x 100 x 12 mm) Strokes per minute 25 spm (3/4” stroke) [Punch Station] in heavy material Brake 12” 83 ton (75 mt) Brake 24” 65 ton (59 mt) Hydraulics 2,600 psi (183 bar)

Open End Brake Max. 1/4” x 6” Flat or (6 x 150 mm) 5 hp 3 ph (3.73 kW) Angle Iron Motor Standard 230/460 208/380/575 Pipe Notcher 3/4”, 1” (19 mm, 25 mm) Schedule 40 1-1/4” (32 mm) Motor Optional 5 hp 1 ph (3.73 kW) 1-1/2”, 2” (38 mm, 50 mm) 230 v Rectangle Notcher 2” x 2-1/2” x 3/8” (50 x 65 x 10 mm) Dimensions W-28” (71 cm) L-77” (196 cm) 90° V-Notcher 6” x 6” x 5/16” (150 x 150 x 8 mm) H-73” (185 cm)

Channel Shear 2” to 6” adj. (50 mm to 150 mm adj.) Weight 5,200 lbs. (2,360 kg)

9 DO 70/110-24M Standard Features • Dual operator allows for two operators to work at the same time at full capacity • 70-ton punch station (1-1/8” in 3/4”) IRON W OR K ER S • Keyed punch ram for safety • 9” throat depth • Punch gauging table with fence and scale • Die holder complete with 2” die insert • Punch nut with wrench • Adjustable swing-away stripper • One round punch & die: max. diameter 1-1/4” • Punch jog control • Two adjustable electric stroke controls with scale • Two electric remote foot pedals • Two hydraulic pumps • Two valves • Angle shear capacity: 6” x 6” x 1/2” at 90° • Rectangle notcher 3” x 4” x 1/2” • Notcher table with guides • 110-ton, 24” flat bar shear with sabre blade • Shear table with miter fence • Tool table work area • Slug receptacles • Electrical box supplied with emergency palm button and lock-out tag-out accommodations • 230/460 volt / 3-ph electrics (must specify voltage) • All guards necessary to comply with ANSI B 11-5 standards • Forklift accommodations • One-year warranty • Made in the USA Capacities and Specifications Rated On: A36 Mild Steel / 65,000 psi Tensile

Punching Capacity 70 ton (63 mt) Channel Shear 2” to 6” adj. (50 mm to 150 mm adj.) 1-1/8” in 3/4” (28 mm in 20 mm) Rod Shear Special Tooling 4” Max. Dia. (100 mm through 5.5 mm) Round Rod (Max.) 1/4” to 1-1/4”, 9 Cavity (6 mm to 32 mm) Square Rod (Max.) 1/4” to 1”, 1 Cavity (6 mm to 25 mm) Throat Depth 9” (225 mm) Square Tube Shear 1/2” to 2”, 12 gauge (2.75 mm) Flat Bar Shear 110 ton, 24” Length, (100 mt, 600 mm) (sabre blade-std.) 1” x 6”, 3/4” x 10” (25 x 150 mm, 18 x 250 mm) Picket Tool 1/2”, 3/4” & 1” (12 mm, 19 mm, 25 mm) 1/2” x 14”, 3/8” x 24” (12 x 350 mm, 10 x 600 mm) 16 gauge (1.6 mm)

Angle Shear 90° 6” x 6” x 1/2” (150 x 150 x 12 mm) Offset Die Holder Max. 40 ton (36 mt) Angle Shear 45° 3” x 3” x 3/8” (75 x 75 x 10 mm) (with Bar Shear) 4” x 4” x 1/2” (100 x 100 x 12 mm) Strokes per minute 25 spm (1/4” stroke) [Punch Station] in light material Brake 12” 65 ton (59 mt) Brake 24” 45 ton (40 mt) Strokes per minute 17 spm (3/4” stroke) [Punch Station] in heavy material Open End Brake Max. 1/4” x 6” Flat or (6 x 150 mm) Angle Iron Hydraulics 2,400/2,600 psi (165/179 bar) Pipe Notcher 3/4”, 1”, (19 mm, 25 mm) Motor Standard 10 hp 3 ph (7.46 kW) Schedule 40 1-1/4”, (32 mm) 230/460 1-1/2”, 2” (38 mm, 50 mm) 208/380/575 90° V-Notcher 6” x 6” x 5/16” (150 x 150 x 8 mm) Motor Optional 10 hp 1 ph (7.46 kW) 220 v Rectangle Notcher 3” x 5” x 3/8” (75 x 125 x 10 mm) 3” x 4” x 1/2” (75 x 100 x 12 mm) Dimensions W-30” (76 cm) L-65” (165 cm) V-Notch 3” x 3” x 3/8” (75 x 75 x 10 mm) H-72 1/8” (183 cm) Notching in Leg of 6” to 10” (150 mm to 250 mm) Weight 3,790 lbs. (1,720 kg) Channel 10 IRON W OR K ER S DO 95/140-24M Standard Features • Dual operator allows for two operators to work at the same time at full capacity • 95-ton punch station (1-3/16” in 1”) • Keyed punch ram for safety • 9” throat depth • Punch gauging table with fence and scale • Die holder complete with 2” die insert • Punch nut with wrench • Adjustable swing-away stripper • One round punch & die: max. diameter 1-1/4” • Punch jog control • Two adjustable electric stroke controls with scale • Two electric remote foot pedals • Two hydraulic pumps • Two valves • Angle shear capacity: 6” x 6” x 1/2” at 90° • Rectangle notcher 3” x 4” x 1/2” • Notcher table with guides • 140-ton, 24” flat bar shear with sabre blade • Shear table with miter fence • Tool table work area • Slug receptacles • Electrical box supplied with emergency palm button and lock-out tag-out accommodations • 230/460 volt / 3-ph electrics (must specify voltage) • All guards necessary to comply with ANSI B 11-5 standards • Forklift accommodations • One-year warranty • Made in the USA Capacities and Specifications Rated On: A36 Mild Steel / 65,000 psi Tensile

Punching Capacity 95 ton (86 mt) Channel Shear 2” to 6” adj. (50 mm to 150 mm adj.) 1-3/16” in 1” (27 mm in 25 mm) Rod Shear Special Tooling 4” Max. Dia. (100 mm through 5.5 mm) Round Rod (Max.) 1/4” to 1-1/4”, 9 Cavity (6 mm to 32 mm) Square Rod (Max.) 1/4” to 1”, 1 Cavity (6 mm to 25 mm) Throat Depth 9” (225 mm) Square Tube Shear 1/2” to 2”, 12 gauge (2.75 mm) Flat Bar Shear 140 ton, 24” Length, (127 mt, 609 mm) (sabre blade-std.) 1” x 8”, 3/4” x 12” (25 x 203 mm, 18 x 304 mm) Picket Tool 1/2”, 3/4” & 1” (12 mm, 19 mm, 25 mm) 1/2” x 16”, 3/8” x 24” (12 x 406 mm, 10 x 609 mm) 16 gauge (1.6 mm)

IRON W OR K ER S • Keyed punch ram for safety • 12” throat depth • Punch gauging table with fence and scale • Die holder complete with 2” and 2-1/2” die inserts • Punch nut with wrench • Adjustable swing-away stripper • One round punch & die: max. diameter 1-1/4” • Punch jog control • Two electric remote foot pedals • Two adjustable electric stroke controls with scale • Two hydraulic pumps • Two valves • Angle shear capacity: 6” x 6” x 1/2” at 90° • Rectangle notcher 3” x 5-3/4” x 1/2” • Notcher table with guides • 200-ton, 24” flat bar shear with sabre blade • Shear table with miter fence • Tool table work area • Slug receptacles • Electrical box supplied with emergency palm button and lock-out tag-out accommodations • 230/460 volt / 3-ph electrics (must specify voltage) • All guards necessary to comply with ANSI B 11-5 standards • Forklift accommodations • One-year warranty • Made in the USA Capacities and Specifications Rated On: A36 Mild Steel / 65,000 psi Tensile

Punching Capacity 120 ton (108 mt) Channel Shear 2” to 6” adj. (50 mm to 150 mm) 1-1/2” in 1” (38 mm in 25 mm) Rod Shear Special Tooling 4” Max. Dia. (100 mm Max. Dia.) Round Rod (Max.) 1/4” to 1-1/4”, 9 Cavity (6 mm to 32 mm) Square Rod (Max.) 1/4” to 1”, 1 Cavity (6 mm to 25 mm) Throat Depth 12” (300 mm) Square Tube Shear 1/2” to 2”, 12 gauge (12 mm to 50 mm, 2.75 mm) Flat Bar Shear 200 ton, 24” Length (600 mm) (sabre blade-std.) 1” x 12” (25 x 300 mm) Picket Tool 1/2”, 3/4” & 1” (12 mm, 19 mm, 25 mm) 3/4” x 20” (18 x 500 mm) 16 gauge (1.6 mm) 1/2” x 24” (12 x 600 mm) Offset Die Holder Max. 40 ton (36 mt) Angle Shear 90° 6” x 6” x 1/2” (150 x 150 x 12 mm) Angle Shear 45° 3” x 3” x 3/8” (75 x 75 x 10 mm) Strokes per minute 20 spm (1/4” stroke) [Punch Station] (with Bar Shear) 4” x 4” x 1/2” (100 x 100 x 12 mm) in light material

Brake 12” 75 ton (55 mt) Strokes per minute 11 spm (3/4” stroke) [Punch Station] Brake 24” 55 ton (40 mt) in heavy material Open End Brake Max. 1/4” x 6” Flat or (6 x 150 mm) Hydraulics 2,750 psi (189 bar) Angle Iron Motor Standard 10 hp 3 ph (7.46 kW) Pipe Notcher 3/4”, 1” (19 mm, 25 mm) 230/460 Schedule 40 1-1/4” (32 mm) 208/380/575 1-1/2”, 2” (38 mm, 50 mm) Motor Optional 10 hp 1 ph (7.46 kW) 90° V-Notcher 6” x 6” x 5/16” (150 x 150 x 8 mm) 230 v

Rectangle Notcher 3” x 5-3/4” x 1/2” (75 x 145 x 12 mm) Dimensions W-34” (119 cm) L-77-1/4” (174 cm) V-Notch 3” x 3” x 1/2” (75 x 75 x 12 mm) H-74 1/4” (187 cm) Notching in Leg of 6” to 10” (150 mm to 250 mm) Weight 6,000 lbs. (2,730 kg) Channel 12 IRON W OR K ER S DO 135/220-24M Standard Features • Dual operator allows for two operators to work at the same time at full capacity • 135-ton punch station (1-11/16” in 1”) • Keyed punch ram for safety • 12” throat depth • Punch gauging table with fence and scale • Die holder complete with 2” and 2-1/2” die inserts • Punch nut with wrench • Adjustable swing-away stripper • One round punch & die: max. diameter 1-1/4” • Punch jog control • Two electric remote foot pedals • Two adjustable electric stroke controls with scale • Two hydraulic pumps • Two valves • Angle shear capacity: 6” x 6” x 1/2” at 90° • Rectangle notcher 3” x 5-3/4” x 1/2” • Notcher table with guides • 220-ton, 24” flat bar shear with sabre blade • Shear table with miter fence • Tool table work area • Slug receptacles • Electrical box supplied with emergency palm button and lock-out tag-out accommodations • 230/460 volt / 3-ph electrics (must specify voltage) • All guards necessary to comply with ANSI B 11-5 standards • Forklift accommodations • One-year warranty • Made in the USA Capacities and Specifications Rated On: A36 Mild Steel / 65,000 psi Tensile

Punching Capacity 135 ton (122 mt) Channel Shear 2” to 6” adj. (50 mm to 150 mm) 1-11/16” in 1” (43 mm in 25 mm) Rod Shear Special Tooling 4” Max. Dia. (100 mm Max. Dia.) Round Rod (Max.) 1/4” to 1-1/4”, 9 Cavity (6 mm to 32 mm) Square Rod (Max.) 1/4” to 1”, 1 Cavity (6 mm to 25 mm) Throat Depth 12” (300 mm) Square Tube Shear 1/2” to 2”, 12 gauge (12 mm to 50 mm, 2.75 mm) Flat Bar Shear 220 ton, 24” Length (600 mm) (sabre blade-std.) 1” x 12” (25 x 300 mm) Picket Tool 1/2”, 3/4” & 1” (12 mm, 19 mm, 25 mm) 3/4” x 20” (18 x 500 mm) 16 gauge (1.6 mm) 1/2” x 24” (12 x 600 mm) Offset Die Holder Max. 40 ton (36 mt) Angle Shear 90° 6” x 6” x 1/2” (150 x 150 x 12 mm) Angle Shear 45° 3” x 3” x 3/8” (75 x 75 x 10 mm) Strokes per minute 20 spm (1/4” stroke) [Punch Station] (with Bar Shear) 4” x 4” x 1/2” (100 x 100 x 12 mm) in light material

Brake 12” 90 ton (81.6 mt) Strokes per minute 11 spm (3/4” stroke) [Punch Station] Brake 24” 70 ton (63.5 mt) in heavy material Open End Brake Max. 1/4” x 6” Flat or (6 x 150 mm) Hydraulics 3,500 psi (241 bar) Angle Iron Motor Standard 10 hp 3 ph (7.46 kW) Pipe Notcher 3/4”, 1” (19 mm, 25 mm) 230/460 Schedule 40 1-1/4” (32 mm) 208/380/575 1-1/2”, 2” (38 mm, 50 mm) Motor Optional 10 hp 1 ph (7.46 kW) 90° V-Notcher 6” x 6” x 5/16” (150 x 150 x 8 mm) 230 v

IRON W OR K ER S • Keyed punch ram for safety • 12” throat depth • Punch gauging table with fence and scale • Die holders - 2”, 2-1/2”, 3” • Punch nut with wrench • Adjustable swing-away stripper • One round punch & die: max. diameter 1-1/4” • Punch jog control • Two electric remote foot pedals • Two adjustable electric stroke controls with scale • Two hydraulic pumps • Two valves • Angle shear capacity: 6” x 6” x 1/2” at 90° • Rectangle notcher 3” x 5-3/4” x 1/2” • Notcher table with guides • 240-ton, 24” flat bar shear with sabre blade • Shear table with miter fence • Tool table and work area • Slug receptacles • Electrical box supplied with emergency palm button and lock-out tag-out accommodations • 230/460 volt / 3-ph electrics (must specify voltage) • All guards necessary to comply with ANSI B 11-5 standards • Forklift accommodations • One-year warranty • Made in the USA Capacities and Specifications Rated On: A36 Mild Steel / 65,000 psi Tensile

Punching Capacity 150 ton (136 mt) Channel Shear 2” to 6” adj. (50 mm to 150 mm) 1-1/2” in 1-1/4” (38 mm in 32 mm) 1-7/8” in 1” (48 mm in 25 mm) Rod Shear 2-1/2” in 3/4” (63 mm in 19 mm) Round Rod (Max.) 1/4” to 1-1/4”, 9 Cavity (6 mm to 32 mm) Square Rod (Max.) 1/4” to 1”, 1 Cavity (6 mm to 25 mm) Special Tooling 4” Max. Dia. (100 mm Max. Dia.) Square Tube Shear 1/2” to 2”, 12 gauge (12 mm to 50 mm, 2.75 mm) Throat Depth 12” (300 mm) Picket Tool 1/2”, 3/4” & 1” (12 mm, 19 mm, 25 mm) Flat Bar Shear 240 ton, 24” Length (600 mm) 16 gauge (1.6 mm) (sabre blade-std.) 1” x 14” (25 x 355 mm) 3/4” x 24” (19 x 610 mm) Offset Die Holder Max. 40 ton (36 mm) Angle Shear 90° 6” x 6” x 1/2” (150 x 150 x 12 mm) Strokes per minute 20 spm (1/4” stroke) [Punch Station] Angle Shear 45° 3” x 3” x 3/8” (75 x 75 x 10 mm) in light material (with Bar Shear) 4” x 4” x 1/2” (100 x 100 x 12 mm) Strokes per minute 11 spm (3/4” stroke) [Punch Station] Brake 12” 75 ton (55 mt) in heavy material Brake 24” 55 ton (40 mt) Hydraulics 3,500/3,000 psi (241/207 bar) Open End Brake Max. 1/4” x 6” Flat or (6 x 150 mm) Angle Iron Motor Standard 10 hp 3 ph (7.46 kW) 230/460 Pipe Notcher 3/4”, 1” (19 mm, 25 mm) 208/380/575 Schedule 40 1-1/4” (32 mm) 1-1/2”, 2” (38 mm, 50 mm) Motor Optional 10 hp 1 ph (7.46 kW) 230 v 90° V-Notcher 6” x 6” x 5/16” (150 x 150 x 8 mm) Dimensions W-34” (119 cm) Rectangle Notcher 3” x 5-3/4” x 1/2” (75 x 145 x 12 mm) L-77-1/4” (174 cm) H-74 1/4” (187 cm) V-Notch 3” x 3” x 1/2” (75 x 75 x 12 mm) Weight 6,400 lbs. (2,910 kg) Notching in Leg of 6” to 10” (150 mm to 250 mm) 14 Channel IRON W OR K ER S Optional Standard Tooling 6509, 9012, 12012, DO 70, DO 95, DO 120, DO 135, DO 150

12” & 24” Brake Open End Brake Pipe Notcher 90° V-Notcher Rectangle 6” x 6” Die Holder Notcher

Channel Shear Tube Shear Rod Shear Picket Tool Offset Unequal Leg Punch Slug Die Holder Angle Blades Receptacle

Notcher Table Punch Gauging Table DO 70, DO 95, DO 120, with Fence & Scale Multi-Loc Punch Gauging Table DO 135, DO 150 36” and 85” extensions available (larger image on page 17) Brake Length Gauge with Scale 12” & 24” Brakes

Shear Table with Miter Fence 6509, 9012, 12012, DO 70, DO 95, DO 120, DO 135, DO 150

Brake Table with 48” Back Gauge Scale & Squaring Arm 12” & 24” Brake Tool table extension with punch and die storage - 6509, 9012, 12012, DO 70, DO 95, DO 120, DO 135, DO 150 Conveyor Attachments & Supports 6509, 9012, 12012, DO 70 DO 95, DO 120, DO 135, DO 150 24” x 5’ conveyor with angle iron support attached to DO 70/110 15 FI 8510-20M Standard Features • 85-ton punch station (1-1/16” in 1”) • Keyed punch ram for safety

IRON W OR K ER S • 10” throat depth • Die holder complete with 2” die insert • Punch nut with wrench • Adjustable swing-away stripper • One round punch & die: max. diameter 1-1/4” • Punch jog control • Adjustable electric stroke control with scale • Electric remote foot pedal • 6” x 6” x 1/2” slug-less angle shear • 20” flat bar shear with 4-way reversible blade • Rod shear capacity 1-3/8” round, 1-1/4” square • Rectangle notcher capacity: 3” x 5” x 1/2” • Two-stage hydraulic pump • Electrical box supplied with emergency palm button and lock-out tag-out accommodations • 230/460 volt / 3-ph electrics (must specify voltage) • All guards necessary to comply with ANSI B 11-5 standards • Forklift accommodations • One-year warranty • Made in the USA

Capacities and Specifications Rated On: A36 Mild Steel / 65,000 psi Tensile

Punching Capacity 85 ton (77 mt) Rod Shear 1-1/16” in 1” (27 mm in 25 mm) Round Rod 1-1/2” (38 mm) Square Rod 1-1/4” (32 mm) Special Tooling 4” Max. Dia. (100 mm Max. Dia.) Square Tube Shear 1/2” to 2”, 12 gauge (12 mm to 50 mm, 2.75 mm) Throat Depth 10” (250 mm) Picket Tool 1/2”, 3/4” & 1” (12 mm, 19 mm, 25 mm) Flat Bar Shear 20” Length, 1” x 12” (500 mm, 25 x 300 mm) 16 gauge (1.6 mm) 3/4” x 20” (19 x 500 mm) Offset Die Holder Max. 40 ton (36 mt) Angle Shear 90° 6” x 6” x 1/2” (150 x 150 x 12 mm) Strokes per minute 35 spm (1/4” stroke) [Punch Station] (45° with Bar Shear) 4” x 4” x 1/2” (100 x 100 x 12 mm) in light material Brake 12” 85 ton (77 mt) Strokes per minute 14 spm (3/4” stroke) [Punch Station] in heavy material Brake 24” 85 ton (77 mt) Hydraulics 2,600 psi (183 bar) Open End Brake Max. 1/4” x 6” Flat or Angle Iron (6 x 150 mm) Motor Standard 5 hp 3 ph (3.76 kW) 230/460 Pipe Notcher 3/4”, 1” (19 mm, 25 mm) 208/380/575 Schedule 40 1-1/4” (32 mm) 1-1/2”, 2” (38 mm, 50 mm) Motor Optional 5 hp 1 ph (3.76 kW) 230 v

90° V-Notcher 6” x 6” x 5/16” (150 x 150 x 8 mm) Dimensions W-30” (76 cm) L-67” (168 cm) Rectangle Notcher 3” x 5” x 1/2” (75 x 125 x 12 mm) H-77” (195 cm) 90° V-Notcher 3” x 3” x 1/2” (75 x 75 x 12 mm) Weight 4,200 lbs. (1,910 kg) Channel Shear 2” to 6” adj. (50 mm to 150 mm adj.)

16 IRON W OR K ER S DO 8514-20M Standard Features • Dual operator allows for two operators to work at the same time at full capacity • 85-ton punch station (1-1/16” in 1”) • Keyed punch ram for safety • 14” throat depth • Punch gauging table with fence and scale • Die holder complete with 2” die insert • Punch nut with wrench • Adjustable swing-away stripper • One round punch & die: max. diameter 1-1/4” • Punch jog control • Two adjustable electric stroke controls with scale • Two electric remote foot pedals • Two hydraulic pumps • Two valves • 6” x 6” x 1/2” slug-less angle shear • Built-in rectangle notcher: 2” x 4” x 1/2” can be converted to 3” x 3” V-Notcher, 50-ton punch station, and 6” open end brake • 20” flat bar shear with 4-way reversible blade • Shear table with miter fence • Rod shear: 1/2”, 3/4”, 1”, 1-1/2” round and 1-1/2” square • Slug receptacles • Electrical box supplied with emergency palm button and lock-out tag-out accommodations • 230 or 460 volt / 3-ph electrics • All guards necessary to comply with ANSI B 11-5 standards • Forklift accommodations • One-year warranty • Made in the USA Capacities and Specifications Rated On: A36 Mild Steel / 65,000 psi Tensile

Punching Capacity 85 ton (77 mt) Rod Shear 1-1/16” in 1” (27 mm in 25 mm) Round Rod (Max.) 1/2”, 3/4”, 1”, 1-1/2”, (13 mm, 19 mm, 25 mm, 38 mm) Special Tooling 4” Max. Dia. (200 mm Max. Dia.) Square Rod (Max.) 1-1/2” (38 mm)

Throat Depth 14” (350 mm) Square Tube Shear 1/2” to 2”, 12 gauge (12 mm to 50 mm, 2.75 mm)

Flat Bar Shear 20” Length, (500 mm) Picket Tool 1/2”, 3/4” & 1” (13 mm, 19 mm, 25 mm) 1” x 16”, (25 x 400 mm) 16 gauge (1.6 mm) 3/4” x 20” (19 x 500 mm) Offset Die Holder Max. 40 ton (36 mt) Angle Shear 90° 6” x 6” x 1/2” (150 x 150 x 13 mm) (45° with Bar Shear) 4” x 4” x 1/2” (100 x 100 x 13 mm) Strokes per minute 48 spm (1/4” stroke) [Punch Station] in light material Brake 12” 85 ton (77 mt) Brake 24” 85 ton (77 mt) Strokes per minute 20 spm (3/4” stroke) [Punch Station] in heavy material Open End Brake 6” x 5/8” (150 x 16 mm) Hydraulics 3,200/3,800 psi (220/260 bar) Pipe Notcher 3/4”, 1” (19 mm, 25 mm) Schedule 40 1-1/4” (32 mm) Motor Standard 10 hp 3 ph (7.46 kW) 1-1/2”, 2” (38 mm, 50 mm) 230/460 208/380/575 90° V-Notcher (Punch Station) 6” x 6” x 5/16” (150 x 150 x 8 mm) Motor Optional 10 hp 1 ph (7.46 kW) Rectangle Notcher 2” x 4” x 1/2” (50 x 100 x 13 mm) 230 v 90° V-Notcher (Notcher Station) 3” x 3” x 1/2” (75 x 75 x 12 mm) Punch Attachment for 50 ton 1-1/4” in 1/2” (32 mm in 12 mm) Dimensions W-30” (750 cm) Notcher Station L-70” (1500 cm) Throat Depth w/Punch 4-7/16” H-77” (1925 cm) attachment Weight 5,400 lbs. (2,455 kg) Channel Shear 2” to 6” (50 mm to 150 mm) 17 Optional Standard Tooling FI 8510-20M, DO 8514-20M IRON W OR K ER S

12” & 24” Brake Open End Brake Pipe Notcher 90° V-Notcher Tube Shear

Urethane Stripper for Picket Tool 6” x 6” Die Holder Offset Die Holder Punch End DO 8514 Open End Brake for Notcher End DO 8514

Punch Slug Channel Shear Blades Receptacle DO 8514 Optional Punch for Notcher End DO 8514

Notcher Table Punch Gauging Table Shear Table with Miter Fence with Fence & Scale

48” Back Gauge

Brake Table with Scale & Squaring Arm 12” & 24” Brake 18 IRON W OR K ER S Conveyor Attachments & Supports FI 8510-20M, DO 8514-20M

24” x 5’ conveyor with angle iron support attached to FI 8510/20M

Conveyor tables can be lined up to hold longer pieces and still have 2.5 ft room for forklift access in between. Walk Fork Path Conveyor Path Conveyor 3 ft 5 ft 4 ft 5 ft 5 .5 f t Shop Floor Space ronworker I 19.5 f t

Multi-Loc Punch Gauging Table 36” and 85” extensions available 19 S ER K In-Stock Punches & Dies OR #20 & #40 Rounds #49 Round Punches Squares #45 Round #40 Punch 1/8 11/16 Punches 1-5/8 1-7/8 1/4 1/8” Thru 1-1/4” 5/32 23/32 1-9/32 1-11/16 1-15/16 9/32 3 mm Thru 31 mm W IRON 3/16 3/4 1-5/16 1-3/4 2 5/16 1.38 13/64 25/32 1-11/32 1-13/16 11/32 1-3/8 1.22 7/32 13/16 3/8 2.38 1/4 27/32 1-13/32 13/32 17/64 7/8 1-7/16 Ovals 7/16 1-15/32 1/4 x 1/2 13/16 x 1 9/32 29/32 15/32 #45 Punch 9/32 x 1/2 7/8 x 1 5/16 15/16 1-1/2 1/2 1-9/32” Thru 1-9/16” 1/4 x 3/4 15/16 x 1 32 mm Thru 36 mm 11/32 31/32 1-17/32 17/32 9/32 x 3/4 1/4 x 1-1/4 1.69 .25 3/8 1 1-9/16 9/16 .13 5/16 x 3/4 9/32 x 1-1/4 13/32 1-1/32 19/32 11/32 x 3/4 5/16 x 1-1/4 1.53 7/16 1-1/16 5/8 2.69 Split Ring 3/8 x 3/4 3/8 x 1-1/4 21/32 15/32 1-3/32 Round 13/32 x 3/4 13/32 x 1-1/4 1/2 1-1/8 1-5/8 11/16 7/16 x 3/4 9/32 x 1-1/4 17/32 1-5/32 1-3/4 23/32 15/32 x 3/4 5/16 x 1-1/4 #49 Punch 9/16 1-3/16 2 3/4 (12012, DO 120, DO 135, DO 150 Machines Only) 1/2 x 3/4 11/32 x 1-1/4 1-5/8” Thru 2” 19/32 1-7/32 2-1/4 25/32 17/32 x 3/4 3/8 x 1-1/4 37 mm Thru 52 mm 5/8 1-1/4 2-1/2 13/16 9/16 x 3/4 13/32 x 1-1/4 2.25 21/32 2-3/4 27/32 19/32 x 3/4 7/16 x 1-1/4 7/8 3 2.06 5/8 x 3/4 15/32 x 1-1/4 29/32 1/4 x 1 1/2 x 1-1/4 3.38 Round Metric 1 9/32 x 1 17/32 x 1-1/4 Round 1-1/32 5 mm 19 mm Offset Dies 5/16 x 1 9/16 x 1-1/4 6 mm 20 mm 9/32 11/32 x 1 19/32 x 1-1/4 7 mm 21 mm 5/16 3/8 x 1 5/8 x 1-1/4 Hexagon Split Ring Punch 8 mm 22 mm Thru 4” 11/32 13/32 x 1 21/32 x 1-1/4 1/2 9 mm 23 mm 2.00 3/8 7/16 x 1 11/16 x 1-1/4 17/32 10 mm 24 mm 13/32 15/32 x 1 23/32 x 1-1/4 11/16 11 mm 25 mm 7/16 1/2 x 1 3/4 x 1-1/4 3/4 12 mm 26 mm 15/32 17/32 x 1 25/32 x 1-1/4 3.56 13 mm 27 mm 1/2 9/16 x 1 13/16 x 1-1/4 14 mm 28 mm Corner 17/32 19/32 x 1 7/8 x 1-1/4 Turning 15 mm 29 mm 9/16 5/8 x 1 15/16 x 1-1/4 1/2 16 mm 30 mm #20 Punch 19/32 21/32 x 1 7/16 x 1-1/2 3/4 1/8” Thru 2-1/4” 17 mm 31 mm 11/16 x 1 9/16 x 1-1/2 3 mm Thru 57 mm 18 mm 32 mm 23/32 x 1 11/16 x 1-1/2 1.00 3/4 x 1 13/16 x 1-1/2 Trimming & Cut Off 25/32 x 1 15/16 x 1-1/2 .56 3/4 1 3.38

20 IRON W OR K ER S Special Punches & Dies

CUSTOM TOOLING Various tooling options and hundreds of punches and dies are available for every model. In addition, we build custom tooling for your special applications. Sample Custom Tooling Built for Special Applications

21 ShearMaster 610 Standard Features

SH EAR • 24” flat bar shear with 4-way reversible blades • Shear table with miter fence • Shearing Capacity: 1 x 12”, 3/4” x 16, or 1/2” x 24” • Strokes per minute: Full stroke—12, Half stroke—30 • Hydraulic hold-down • Electric back gauge • Electric stroke control • Electric foot pedal • 10 hp motor • 230/460 volt / 3-ph electrics • Dimensions: W-32”, L-48”, H-70” • Weight: 3,100 lbs. • Forklift accommodations • One-year warranty • Made in the USA

ShearMaster 610 shown with optional Scotchman Advanced Feed System

22 SH EAR

ShearMaster 610 shown with optional 5ft Roller Conveyor

Optional Standard Tooling ShearMaster 610 • Work light • 10 hp 1 phase motor • Infeed conveyor • Advanced feed system for fully automatic production

23 CPO 275 Series Maximum Capacities (With a 10-3/4” Blade) Standard Equipment & Features • Double self-centering vise assures burr-free cuts Tubing 90 Degree 45 Degree • Miter capabilities 45° left to 45° right Round 3-3/8” 2” • Miter locking device: quick, accurate setting-stops Square 3” x 3” 2” x 2” at 45° left, 90°, and 45° right Rectangle 3” x 2-3/8” 3” x 2” • Capable of slotting • Two cutting speeds Solid 90 Degree 45 Degree • Hardened and ground worm and wheel gear box Round 1-1/2” 1”

WS • Worm wheel of top quality bronze Square 1-1/2” x 1-1/2” 1” x 1”

A • 7 gallon coolant tank with pump • 30” material length stop • One 10” diameter (250 mm) HSS blade • One blade wrench

OLD S • One gallon concentrated coolant CPO 275 C • 230 or 460 volt/3-ph electrics (must specify voltage) MANUAL SAW • One-year warranty • Made in the USA • Manual clamp for material vise CPO 275 pk • Operator control trigger switch MANUAL SAW WITH POWER CLAMP • Miter locking device stops 45° left, • Air-operated clamp for material vise 90° and 45° right CPO 275 pkpd • Operator control trigger switch SEMI-AUTOMATIC SAW • Air-operated clamp for material vise • Pneumatic power down feed with electric controls • Separate feed controls for rate and pressure • Emergency stop button

Specifications Cutting Speeds (must specify when ordering) LT (Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe LT 30/60 rpm Motor Rate: 2 hp HT (High Turn) designed for thin wall tube .060 wall thickness or thinner and non-ferrous material HT 60/120 rpm Motor Rate: 1.5 hp SS (Single Speed) designed for 220 1-ph applications SS 60 rpm Factory Wired: Specify 208 3-ph, 230 3-ph, 460 3-ph, 575 3-ph 60 Hz, or 220 1-ph (SS Model Only) Maximum Diameter Blade: 10-3/4” (275 mm) Arbor Bore: 1-1/4” (32 mm) Pin Spacing: 2/8/45 Width: 21-7/8” Depth: 43-1/2” Height: (not incl. feed handle) 53-1/4” Height: (from floor to vise) 36-1/8” Weight: 600 lbs. 24 Maximum Capacities CPO 350 Series (With a 14” Blade) Standard Equipment & Features Tubing 90 Degree 45 Degree • Double self-centering vise assures burr-free cuts Round 4 -1/2” 4” • Miter capabilities 45° left to 45° right Square 4-1/4” x 4-1/4” 4” x 4” • Miter locking device: quick accurate setting-stops Rectangle 5-1/2” x 4” 4” x 4” at 45° left, 90° and 45° right • Capable of slotting

Solid 90 Degree 45 Degree • Two cutting speeds C

Round 2” 1-3/4” • Double reduction, hardened and ground worm S OLD Square 2” x 2” and wheel gear box 1-3/4” x 1-3/4” • Worm wheel of top quality bronze • 7-gallon coolant tank with pump

• 30” material length stop A

• One 12-1/2” diameter (315 mm) HSS blade WS • One blade wrench CPO 350 • One gallon concentrated coolant MANUAL SAW • 230 or 460 volt/3-ph electrics (must specify voltage) • Manual clamp for material vise CPO 350 pk • One-year warranty • Operator control trigger switch MANUAL SAW WITH • Made in the USA POWER CLAMP • Air-operated clamp for material vise CPO 350 pkpd • Operator control SEMI-AUTOMATIC SAW trigger switch • Air-operated clamp for material vise • Pneumatic power down feed with electric controls • Separate feed controls for rate and pressure • Emergency stop button

Specifications Cutting Speeds (must specify when ordering) LT (Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe LT 22/44 rpm Motor Rate: 3 hp LT Variable Speed Drive 12 to 82 rpm Motor Rate: 5 hp HT (High Turn) designed for thin wall tube .060 wall thickness or thinner and non-ferrous material HT 44/88 rpm Motor Rate: 2.5 hp HT Variable Speed Drive 24 to 208 rpm Motor Rate: 5 hp SS (Single Speed) designed for 220 1-ph applications SS 44 rpm Motor Rate: 3 hp Factory Wired: Specify 208 3-ph, 230 3-ph, 460 3-ph, 575 3-ph 60 Hz or 220 1-ph 60 Hz (SS model only) Maximum Diameter Blade: 14” (350 mm) Arbor Bore: 1-9/16” (40 mm) Pin Spacing: 4/12/64 Width: 21-7/8” Depth: 43-1/2” Height: (not incl. feed handle) 56-1/4” Height: (floor to vise) 37-7/16” Weight: 675 lbs. 25 CPO 350 NF Series Maximum Capacities (With a 13-1/2” Blade) Standard Equipment & Features • Double self-centering vise assures burr-free cuts Tubing 90 Degree 45 Degree • Miter capabilities 45° left to 45° right Round 4-1/2" 4-1/4" • Miter locking device: quick, accurate setting-stops Square 4 -1/4" x 4 -1/4" 4" x 4" at 45° left, 90°, and 45° right Rectangle 5-1/2" x 4" 4" x 4" • Capable of slotting • Two cutting speeds Solid 90 Degree 45 Degree • Positive cog belt driven Round 3" 2-1/2"

WS • One gallon coolant tank with mist lubrication system Square 3" x 3" 2-1/2" x 2-1/2” A • 30” material length stop • One 13-1/2” diameter (338 mm) carbide-tipped blade • One blade wrench • One gallon concentrated coolant OLD S

C • 230 or 460 volt/3-ph electrics (must specify voltage) CPO 350 NF • One-year warranty MANUAL SAW • Made in the USA • Manual clamp for material vise CPO 350 NF pk • Operator control trigger switch MANUAL SAW WITH POWER CLAMP CPO 350 NF pkpd • Air-operated clamp for material vise SEMI-AUTOMATIC SAW • Operator control trigger switch • Air-operated clamp for material vise • Pneumatic power down feed with electric controls • Separate feed controls for rate and pressure • Emergency stop button

Specifications Non-Ferrous machines designed for aluminum, plastic, copper, etc. Cutting Speeds: 1,500 & 3,000 rpm Motor Rate: Low rpm 3 hp - High rpm 3.8 hp Factory Wired: Specify 208 3-ph, 230 3-ph, 460 3-ph, or 575 3-ph 60 Hz Maximum Diameter Blade: 14” (350 mm) Arbor Bore: 1-9/16” (40 mm) Pin Spacing: 4/12/64 Width: 21-7/8” Depth: 43-1/2” Height: (not incl. feed handle) 56-1/4” Height: (from floor to vise) 37-7/16” Weight: 675 lbs. 26 Maximum Capacities CLM 350 SA Series (With a 13-1/2” Blade) Standard Equipment & Features Tubing 90 Degree 45 Degree • Rigid column design Round 4-1/2” 4” • Hydraulic-operated vise with anti-burr device Square 4” x 4” 4” x 4” • Hydraulic-operated power down feed Rectangle 6” x 4” 5” x 4” • Hydraulic-operated feed pressure reducing valve • Head miters 45˚

Solid 90 Degree 45 Degree • Two cutting speeds: C Round 4” 3” LT-15 rpm and 30 rpm S OLD Square 4” x 4” 3” x 3” HT-30 rpm and 60 rpm • Electric limit switches for stroke setting • Electric foot pedal A

• Emergency stop button WS • Steel stand CLM 350 SA • Five-gallon coolant system with chip collection tray COLUMN 14” SEMI-AUTOMATIC SAW • Way lubrication system • Hydraulic-operated power clamp for material vise • One 12-1/2” diameter (315 mm) high-speed steel blade • Hydraulic-operated power down feed • One blade wrench • One gallon concentrated coolant • 230 or 460 volt/3-ph electrics (must specify voltage) • Two-year warranty (Exception- One-year warranty on hydraulic and electrical parts) • Made in the USA

Specifications Cutting Speeds: LT (Low Turn) 15 and 30 rpm designed for solid mild steel, solid stainless steel and thick wall pipe HT (High Turn) 30 and 60 rpm designed for thin wall tube and non-ferrous material Motor Rate: Low rpm 2.5 hp - High rpm 3.3 hp Blade Motor: 1.9 kW and 2.5 kW Hydraulic Motor: 1.0 kW Factory Wired: Specify 208 3-ph, 220 3-ph, or 440 3-ph 60 Hz Maximum Diameter Blade: 14” (350 mm) Arbor Bore: 1-9/16” (40 mm) Vise Opening: 6-3/4” (179 mm) Pin Spacing: 4/12/64 Width: 36” Depth: 42” Height: 78” Height: (from floor to vise) 35 1/2” 27 Weight: 1,100 lbs. Cold Saw Options WS A OLD S C

Special Clamping Fixture CPO 275 and 350 Square Tube Jaws

Variable Speed Control Miter Locking Device Recommended for cutting multiple shapes, Standard Feature sizes, and thicknesses. RPM can be fine- (not available for 275 PK or tuned to achieve optimum blade speed 275 PKPD models) for each application and increase blade life.

SPECIAL NOTE For customer using single phase power: the variable speed allows 3-ph machine to operate with 220 volt 1-ph power without loss of power.

28 Cold Saw Options 60" or 120" Material Stop Roller Conveyor Mounted with an C

Advanced Measuring S OLD Quick-Loc System Designed for quick, A easy and accurate Right-Hand Quick-Loc WS length setting. Available left to Roller Conveyor with Stop right or right to left material feed.

Right-Hand Quick-Loc with Quick Release Handle Scale on 1/16” Increments

10' and 20' Material Supply Track

29 Circular Cold Saw Blades • Blade Sharpening

Scotchman offers a fast, high-quality Blade Sharpening Service and will grind blades with

WS special tooth number. A

Scotchman has a complete selection of saw blades in stock for immediate delivery. OLD S C 250 mm-10” HSS 275 mm-10-3/4” HSS Carbide-tipped for non-ferrous models 32 mm BORE 32 mm BORE 2/8/45 & 2/11/63 Pin Spacing 2/8/45 & 2/11/63 Pin Spacing Non-Ferrous Standard Cold Saw Blades Part No. Thickness Teeth Part No. Thickness Teeth 40 mm BORE 2/8/55 & 4/12/64 Pin Spacing 74300 .080 90 74360 .080 90 Part No. Thickness Teeth 74304 .080 100 74361 .080 100 74326 .085 120 Carbide 12”Dia. 74302 .080 120 74362 .080 120 74327 .125 72 Carbide 12” Dia. 74306 .080 150 74363 .080 150 74329 .125 84 Carbide 13-1/2” Dia. 74305 .080 180 74365 .080 180 74307 .080 240 74366 .080 220 74367 .080 260

275 mm-10-3/4” HSS 315 mm-12-1/2” HSS 350 mm-14” HSS 40 mm BORE 40 mm BORE 40 mm BORE 2/8/55 & 4/12/64 Pin Spacing 2/8/55 & 4/12/64 Pin Spacing 2/8/55 & 4/12/64 Pin Spacing Part No. Thickness Teeth Part No. Thickness Teeth Part No. Thickness Teeth 74309 .100 90 74355 .100 90 74390 .100 90 74308 .100 100 74356 .100 100 74391 .100 100 74310 .100 120 74357 .100 110 74392 .100 110 74311 .100 150 74345 .100 120 74393 .100 120 74312 .100 180 74348 .100 150 74394 .100 150 74313 .100 220 74350 .100 180 74395 .100 180 74314 .100 260 74352 .100 220 74396 .100 220 74354 .100 280 74397 .100 280

POWER 2000 Blades • 315 mm 12-1/2” PERFORMANCE 3000 Blades • 315 mm 12-1/2” 40 mm BORE 2/8/55 & 4/12/64 Pin Spacing 40 mm BORE 2/8/55 & 4/12/64 Pin Spacing Part No. Thickness Teeth Part No. Thickness Teeth 074372 .070 ALL 074349 .100 ALL

Blades are coated for longer blade life. Blades are coated for longer blade life. Maximum wall thickness .100

30 CPO 315 HFA Series CPO 315 HFA Hitch Feed Automatic Standard Equipment & Features • Available in ferrous and • Fully automatic cycle non-ferrous models • Push button controls actuate the complete cycle • 5 hp variable Rpm speed control (ferrous model) • 3.8 hp 3,000 rpm (non-ferrous model)

• Interlocking safety hood C

• Clamping both sides of blade - highest quality, S OLD burr-free cuts • Blade guides for accurate tolerances (ferrous model) A

• Flood coolant (ferrous model) WS • Mist coolant (non-ferrous model) • Adjustable stroke control on the saw head • Adjustable down feed control on the saw head for feed pressure and feed rate • Piece counter • Length scale in both inches and metric • Quick and easy fine adjustment of length setting • One saw blade • One gallon concentrated coolant • One-year warranty • Made in the USA Optional Equipment • Mist coolant • Form jaws for multiple tubes • Digital read-out for quick easy length setting • Ten-foot or twenty-foot material supply track Cutting Capacities - based on mild steel

Tubing Round up to 3-1/2” Square up to 3-1/8” x 3-1/8” Solid Round up to 2” Square up to 2” x 2”

Cutting Speeds CPO 315 HFA LT Variable Speed 12 to 82 rpm CPO 315 HFA HT Variable Speed 24 to 208 rpm CPO 315 HFA NF 3,000 rpm

Specifications Length Tolerance: + or - 0.004 Squareness Tolerance: 0.002 per diameter inch Minimum Cut Length: 1/8” Maximum Cut Length: Single Index 30”, Double Index 60”, Triple Index 90” Motor HP Ferrous Models: 5 hp Motor HP Non-Ferrous Models: 3.8 hp Power Supply: 208/230/460 3-ph Air Pressure: 90 lbs. minimum Maximum Saw Blade Diameter: 12-1/2” (315 mm) Arbor Bore Size: 40 mm Stroke Control Adjustment Pin Spacing: 4/12/64 Length: 100” Width: 44” Height: 64” Weight: 1,770 lbs. 31 CPO 315 RFA Series Scotchman Roller Feed Automatics are designed to your specifications WS A OLD S C

CPO 315 RFA Fully Automatic Roller Feed Saw shown with Supply Table • Available in ferrous and non-ferrous models

315 RFA Bundle Loading Magazine

Specifications Length Tolerance: + or - 0.006 repeatability Minimum Cut Length: 1-1/4” Squareness Tolerances: 0.002 per diameter inch Maximum Cut Length: 60” (90” or 120” available) Maximum Saw Blade: 12-1/2” (315 mm) Minimum Trim Cut: 1” Arbor Bore Size: 40 mm Motor HP Ferrous Models: 5 hp Pin Spacing: 4/12/64 Motor HP - Non-ferrous Model: 3.8 hp Supply Table Maximum Raw Stock: 24’ Power Supply: 208/230/460 3-ph Supply Table Width: 24” Air Pressure: 90 lbs. minimum Length: 384” Width: 46” Height: 63” Weight: 3,250 lbs 32 C S OLD A WS

Standard Equipment & Features • Fully automatic cycle • Push button controls actuate the complete cycle • Automatic loading of each new bar • Automatic trim cut of each new bar • Automatic tube ejection • Clamping both sides of blade - highest quality, burr-free cuts • 5 hp variable Rpm speed control (ferrous model) • 3.8 hp - 3,000 rpm (non-ferrous model) • Interlocking safety hood • Blade guides for accurate tolerances (ferrous model) • Trim and remnant gate • Adjustable stroke control on the saw head • Separate feed controls for rate and pressure • Piece counter • Length scale in both inches and metric • Digital read-out for quick and easy fine adjustment of length setting • Supply table takes up to 24’ material • Mist coolant system 315 RFA Feed Roller • One saw blade • One gallon concentrated coolant • One-year warranty • Made in the USA Optional Equipment • In-line deburring unit • Flood coolant • Longer cut lengths - 90” or 120” • Bundle loader magazine

Cutting Capacities - based on mild steel

R o u n d Tu b e 3-1/2” Round Solid 2” Square Tube 3-1/8” x 3-1/8” S q u a r e S o l i d 2” x 2”

Cutting Speeds CPO 315 RFA/ST LT Variable Speed 12 to 82 rpm Quick Lock Length Setting with Fine Tune CPO 315 RFA/ST HT Variable Speed 24 to 208 rpm Adjustment and Digital Read-Out CPO 315 RFA/ST NF 3,000 rpm 33 Scotchman Advanced Feed System If you need to...increase your production, decrease set-up time, reduce operator error, and eliminate scrap... Scotchman Advanced Feed System is the answer for you! m te ed s c y advan eed s f

Scotchman Advanced Feed System, coupled with the advanced interconnect kit, turns your semi-automatic machine into a fully automatic production machine.

This versatile system comes complete with a powerful controller, allowing you to set up to 99 programs. The system automatically moves your material to position, automatically clamps the material, and cycles the machine.

34 Scotchman Advanced Feed System

Key Pad Controller Material Clamp F S EED

Key Benefits ADVAN • The system can be mounted to feed the material left to right or right to left • With the optional material clamp, it can be used as a fully automatic programmable Y C

push feed system S ED • It can be used as a programmable stop system TE

• Program multiple lengths to minimize remnant length M • Length setting can be in feet, inches, fractions, decimals or metric • Optional downloading from your PC • Optional optimizing of your cut list to save on material Standard Features • Multi-offset allows for multiple tool positions • Set point mode • Kerf compensation • Electronic zero-point calibration • Full diagnostic suite • Multi-lingual • Input-feet, inches, fractions, decimal and metric • Increment function • Can be used as a feeder or stop • Pattern mode • Eliminate wasted material and time from miscuts • Programmable • Miter capability on saw head Specifications • Working lengths available: 4', 6', 8', 10', 12', 16', 20', 22', 24', & 30' • Power requirements: 120 volt 15 amps • Frequency: 50/60 Hz • Motor type: DC servo with optical encoder • Drive type: Steel reinforced belt drive • Drive speed: Adjustable 1” to 25” per second

35 Programmable Stop Scotchman Programmable Stop System

The Scotchman Programmable Stop System allows you the ability to enter a part length and the stop will advance to that position quickly, and accurately. The Stop System can move one length at a time, or be programmed with a series and quantities of cut lengths for faster operation. Have you had the problem of a machine operator not being able to read a tape measure or the problem of inconsistent lengths due to different operators setting the length stops? Too long a set up time? With a Scotchman System, you can end these costly mistakes that result in bad parts. The operator simply enters the number from the cut sheet into the keypad controller, presses “Start”, and the automated stop moves to the correct position at 2’ per second! No need for a tape measure to set the length stops again. The Scotchman System can use fractions, decimals, or millimeters. The Stop System is available in lengths from 4’ to 30’. The stop uses a 32 mm steel reinforced cog belt, powered by a DC Servo driven motor, with an optical encoder for repeatability and accuracy. Each system includes a covered roller conveyor, as well as a Standard Inter Connect Kit (SIK), which prevents the stop from moving while the tool is in motion. Contact your Scotchman representative concerning your specific needs and applications for all your metal forming needs. le b a mm top s ra pro g

Programmable Stop on an Ironworker

36 Programmable Stop g pro Programmable Stop with Pusher Foot on a Cold Saw ra s top mm a b le le

Programmable Stop-Heavy Duty on a Band Saw

37 Advanced Measuring Systems MULTI-LOC STOP SYSTEM QUICK-LOC STOP SYSTEM The Multi-Loc Stop System allows you to set stops at The Quick-Loc version is available in Left-Hand & Right- various lengths to enable you to maximize your raw stock Hand models. Numerous accessories have been designed to without changing your set-up each time. These Multi- customize this system to your special needs. A listing of the Loc versions of the AMS Gauging Systems allow you to accessories can be found on the following page. It is available in place multiple stops on the rail as close as 1” apart on the increments of 1/16”, and in standard lengths of 4’, 6’, 8’, 10’, & 12’. Standard System, and 1-1/2” apart on the Heavy Duty Longer lengths can be achieved by joining rails together. System. Three stops come with each assembly and either Our exclusive teeth feature allows you to quickly set our system is available in Left-Hand & Right-Hand models. Quick-Loc Stop using the built-in measure. In seconds, your Additional Multi-Loc Stops are available. work station is set up and locked in. To operate, simply set the stops to your cut list dimensions. Slide the material past the stops you do not want to use, right to the desired setting. Press the material against the fence and the flippers on the stops not used move away. Multi-Loc Stop Systems are available in 1/16” increments and in standard lengths of 4’, 6’, 8’, 10’, & 12’. Longer lengths can be achieved by joining rails together.

Simply squeeze the handle on the Quick-Loc Stop System, slide it into position, and release it. The teeth on the stainless steel stop align themselves to the teeth on the rail to give you exactly the dimension you set. Once set into place, the stop cannot slip!

The Multi-Loc Stop System makes setting your production • Fast runs faster. It is as easy as picking up the stainless steel stop Simply move the stop to the correct setting and let go. The and pressing it down at the dimension you want. gauge aligns itself to the dimension you selected. It’s as easy as picking up & pressing down the Multi-Loc or sliding the Quick- Loc to the setting. MS A • Accurate Once set, the teeth guarantee the stop will never slip or move, eliminating measuring errors and waste. • Repeatable The same dimensions can be repeated again and again by different operators on different operations, even on different days. A Guarantee, with Teeth! While the teeth align the stop to the dimension you choose, they also add incred- ible strength. Once set, the teeth guarantee the stop will • Cost Effective never slip or move. The teeth in our stop systems allow The investment will be quickly returned in lower labor costs, operators to increase accuracy, reduce set-up time, and reduced makeovers and less waste. eliminate waste. 38 AMS 39 xtension xtension E Multi-Loc Adapter Multi-Loc 10” Flip up up Flip 10” (Raised) for Quick-Loc for (Raised) Allows you to use to both you Allows Multi-Loc & Quick-Loc on the sameStops rail. Material thickness from 16 16 from thickness Material gauge 3/4”. to Vertical Multi-Stop Block Multi-Stop Vertical xtension xtension unching resses E • P • P for Quick-Loc for Fine Adjusting Knob Adjusting Fine 10” Flip up up Flip 10” Heavy Duty Multi-Loc For applications that that applications For require fineto adjusting 1/64”, 1/32”. AWS AWS S old ronworkers • C • I aws Stop Systems for all your Gauging Applications Gauging all your for Systems Stop Standard xtension shown shown xtension E Multi-Loc Stop Multi-Loc rm S Miter Attachment Miter on a Quick-Loc Arm on a Quick-Loc 10” 10” angles. For useFor with miter saws; accepts 22.5 ° 45 ° to AMS - Loc Stop System Accessories System Stop Loc - AMS A adial • R RILLING • DRILLING aws To view machinery applications ....Visit: www.locstop.com.... and click on PHOTOS PHOTOS on click and www.locstop.com...... Visit: applications machinery view To S ff Quick-Loc Arm Quick-Loc Roller Conveyor Release Adapter Release -O ut HEARING With right-hand Quick-Loc.With right-hand time. Enables you to cut several several cut to you Enables one at together, pieces When affixed to the Quick- release a enables Loc,it binding prevent to 1/8” of between stock & blade.

• S The following is a partial list of possible applications: possible of list a partial is The following • C Our Patented Loc-Stop System is a state-of-the-art measuring system. Replacing your existing old Replacing style a state-of-the-art your is system. measuring measuring System Loc-Stop Our Patented higher and productivity, efficiency, greater road to on the will start you system Loc-Stop our exclusive with devices cost. business lower 1016 Series Scotchman 1016 Horizontal Band Saws are simple to use, dependable, straight-cutting machines. The 1016 Series is available in a fixed head, and a swing head with 45 degrees of head movement without material movement. These American-made machines offer the rigidity and features to provide years of production. Standard Equipment • Head swings to 45° (SH) - no material movement Vise swings to 45° (FH) • Fine adjustment head feed control • Quick head approach with hold • Infinitely adjustable blade speed • Saw guides, spring-loaded, solid carbide inserts • Replaceable steel wear plates on bed • Inbound roller for material support FH 1016 Fixed Head • Discharge table for small pieces • Recirculating coolant system with splash guard • Wash down hose with hanger • Powered blade brush • Saw blade guard • Instructions and parts manual • Voltage 208, 230, 460 - 60 Hz 3-ph (specify)

Optional Equipment • Pneumatic head raise • Pneumatic vise • Work light • 220 volt 1-ph • Roller conveyor

Specifications Capacity: 10” x 16” Capacity at 90°: 10” high x 16” wide, 10-3/4” rounds SH Capacity at 45°: 10” high x 10-3/4” wide, 10-3/4” rounds FH Capacity at 45°: 10” high x 8” wide, 8” rounds Blade Drive Motor: 2 hp variable Feed Control: Infinitely variable, hydraulic control, spring-balanced head Vise: Manual SH 1016 Swing Head Drive Wheel: 14-1/2” diameter cast iron Blade Speed: Variable, 105 to 275 sfpm Blade Specifications: 1” x 0.035” x 159” bi-metal

WS Blade Tension: Spring loaded by handwheel A Coolant System: Flood, recirculating, with wash down hose and 5-gallon reservoir Weight: (FH)-950 lbs. (SH)-1150 lbs. Dimensions: Length: 81” Width: 27” Height: 63” AND S B

40 BAND SAWS 41 ) A nly) nly) A O ent (SH O ent (SH ent (SH & SH ment m m m 1419 Series Series 1419 . quip quip quip quip E ptional O vise • nesting Overhead pressure vise • Variable lubricator band • coolant Mist light • Work only) (SH 1-ph volt • 220 • conveyor Roller • fence Outboard Scotchman 1419 Horizontal Band Saws are are Saws Band Horizontal 1419 Scotchman automatic fully and manual both in available for head swing a have machines These versions. provide movement; material without mitering bundle for ideal are and cuts; accurate straight, blades, large heads, massive their With cutting. machines these features, standard of array and applications toughest the handle to designed are production of years for • Instruction and parts• and Instruction manual Hz/3-ph (specify) 460/60 230, 208, •Voltage Standard E movement material - no • 60 degrees swings Head hold with approach • head Quick raise head •Hydraulic clamp vise •Hydraulic Standard E movement material - no degrees • 45 swings Head lift head stop adjustable with raise head •Hydraulic automatic •Fully - NC - rotary encoder control length •Programmable switch •Out-of-stock Standard E rate adjustable separate with feed control • Hydraulic feed pressure and capacity vising full stroke, full • Hydraulic inverter AC speed via blade adjustable • Infinitely inserts carbide solid spring-loaded, with • guides Saw bed on plates wear steel •Replaceable system coolant flood •Recirculating hanger with hose down •Wash brush blade •Powered guard • blade Saw 68” 68” Height: Height:

42” 104” Width: Width:

92” 92” s Flood, recirculating, with recirculating, 5-gallon reservoirFlood, 14” high x 10-1/2” wide, 10-1/2” rounds 10-1/2” wide, x 10-1/2” high 14” frequency variable 3 hp AC (SHA) 2 hp (SH), hp 0.5 with feed and adjustable rate Hydraulic spring-balanced head pressure, full full capacity stroke, Hydraulic, full capacity hydraulic, Optional 40” stroke with index 8 x multiple (SHA) cast20” diameter iron 400 to 70 sfpm variable, inverter AC bi-metal x 197” x 0.042” 1-1/4” handwheelSpring loaded by 14” x 19” 14” rounds 15” wide, x 19” high 14” rounds 15” wide, x 14” high 14” (SH)-1700 lbs. (SHA)-3150 lbs. (SHA)-3150 lbs. (SH)-1700 Length: Length:

ation SH 1419

SHA 1419 SHA

ic f i

c Dimensions for SHA: Dimensions for SH: Blade Tension: Coolant System: Weight: Drive Wheel: Blade Speed: Blade Specifications: Vise: Bundling: Single Stroke Index: Blade Drive Motor: Hydraulic System: Feed Control: Capacity at 90°: Capacity at 45°: CapacitySH at 30°: Spe Swing Head Capacity: 42 BAND SAWS P Blade • Blade tension indicator • Blade indicator speed (45° right, 10° left) • Cast iron work table with tilt 1/4”, 3/8”, and 1/2” • One set of steel guide inserts for bands for bands blocks 1/8” through 1/2” • One set of high-speed, insert-typeE guide Standard recommendation. Example: to cut 5-inchwork pitch using blade, abi-metal is 3-4 the recommendation primary and 2-3 pitch is the secondary 2) 1) Find this length in the appropriate table below. For structurals, use the contact length through most of the cut. For tubing, use to two three times the wall thickness. For solids, this length is determined by measuring the diameter of around or the side of arectangle. Determining the proper pitch is based on the length of this contact. For results, best aminimum of 3teeth and maximum of 24 teeth should in be contact with the workpiece at any given time. Weight: Table Dimensions: Wheels: Blade Inverter) Frequency (Variable Speed: Blade Variable Length: Blade Capacity: Width Blade Frame: Unitized Specifications: Blade Height: Work Maximum to Column: Band Throat, Spe • Instructions manual and parts • Job selector • 2hp variable AC frequency blade drive • Chip pan make it an indispensable addition to most shop applications. saw offers versatility, dependability, and production capability that make changing speeds easier than ever before. This general-purpose tight radiuses or cut off large sections. Its variable frequency drives Its ability to easily accept blade widths 1/8” to 1” allows it to follow machine that can saw wood, plastic, steel, aluminum, or stainless steel. The Scotchman VC-20 Vertical Contour Band Saw is a versatile VC-20 Band Saw Blades 0 The secondaryrecommendationThe is in the thinner section. pitch primary The recommendation is the thicker directly above section or below that length. 10-14 c 1200 lbs. i Millimeters f Inches c i it ation 8-12 Vertical Contour Band Saw

ch quip 6-10 Length: Length: 26” x 26” x 39” tall 2 Aluminum with crowned rubber tires 125 to sfpm 2000 154” 1/8” to 1” Welded steel 1/2” x0.035” x154” Bi-metal 13” 20” s 25 1 m ent 40” 40” 5-8

Width: 50 2

50” 50” • 220 volt/60 Hz/1-ph (optional) volt/60• 460 Hz/3-ph • 230 volt/60 Hz/3-ph E • 220 volt single phase and inserts • Heavy duty saw guide blocks • Rip fence • Mitering attachment • Work jaws with handles • Power attachment feed • Mist coolant • Chip blower • Blade welder with grinder O 4-6 Bi-Metal Blade Bi-Metal le ptional ptional

Height: c 75 3 tri 5-8 Tooth5-8 Tooth4-6 Tooth3-4 1” x159” 81” V Bi-Metal c E al 100 E 4 3-4 quip quip 125 5 ent m s 5-8 tooth 5-8 Tooth4-6 Tooth3-4 1-1/4” x197” ari- m 150 ent 6 T 175 oot 7 2-3 200 8 5-8 tooth 5-8 1/2” x154” Blade h VC-20 9 1.5-2 250 10 15 500 20 s 5-8 Tooth5-8 3/4” x154” 25 750 1-1.5 30 35 1000 40 Are you interested in LEASING? Scotchman Credit Corp is leading the way with LOWER Interest Rates on a SCOTCHMAN LEASE/PURCHASE! ****We finance other brands of equipment, too! LEASING NOT AVAILABLE IN ALABAMA, LOUISIANA, NEW JERSEY, NEVADA AND WEST VIRGINIA BUSINESS LEASE PROGRAM This Monthly Payment Plan is available to qualified buyers through our participating dealers nationwide. One advance payment is required for each year of the lease. A $100.00 documentation fee is required with your Advance Payment. • $1.00 End of lease buyout • No early payoff penalty • $3,000.00 lease minimum • 12 month to 60 month leases available SCHOOL LEASE PROGRAM This Yearly Payment Plan is available to SCHOOLS ONLY through our participating dealers nationwide. One advance payment is required for the yearly payment lease plan. A $100.00 documentation fee is required with your Advance Payment. • $1.00 End of lease buyout • No early payoff penalty Bi-Metal Vari-Tooth Blades • $3,000.00 Lease minimum • Available in 1 to 5 year leases **SIMPLE ONE-PAGE Lease Application available at www.scotchman.com/leasing.php

For more information, please contact: Scotchman Industries, Inc. PO Box 850 • 180 East Hwy. 14 • Philip, SD 57567 Phone: (800) 843-8844 (605) 859-2542 • Fax: (800) 843-5545 (605) 859-2499 • Email: [email protected]

43 FI 8510-20M IRONWORKER

In Memory of Art Kroetch CLM 350 SA 1926-2007 COLD SAW Founder of Scotchman Industries

Quality materials and construction, dependable performance, competitive pricing, and service have made Scotchman Hydraulic Ironworkers, Circular Cold Saws, Band Saws, Advanced Measuring Systems, and Advanced Feed Systems the first choice of metal fabricators, machine shops, and technical schools throughout the world. ADVANCED Established in 1967, our factory and corporate offices are MEASURING located in Philip, South Dakota. Factory representatives assist SYSTEMS dealers world wide. We have an authorized dealer near you. Today, Scotchman Industries, Inc. has a complete line of thirteen different ironworkers, ranging in capacities from 45 to 150 tons, with component tool design, and a fully integrated European style; both are available in either single or dual operator models. SH 1419 As the world and its markets change and expand, Scotchman BAND SAW Industries continues to grow and adapt. Scotchman Industries, indeed, provides your Metal Fabricating Solutions.

Scotchman Industries • 180 E. Hwy 14 • PO Box 850 • Philip, SD 57567 USA Call Toll Free in USA: 1-800-843-8844 • Call Direct : 605-859-2542 • Fax: 800-843-5545 or 605-859-2499 8/0744 www.scotchman.com e-mail: [email protected]