A Full Range of Ruggedly Built Manual, Pneumatic Vise, Semi-Automatic and Fully Automatic Cold Saws Simply the Best
Total Page:16
File Type:pdf, Size:1020Kb
A full range of ruggedly built manual, pneumatic vise, semi-automatic and fully automatic cold saws Simply the Best Manual Ferrous an Manually operated saw and vise ideal for one-off or short production runs of mild steel, aluminum and tubing. Features: 208/230/460/60/3 Electricals Totally Enclosed Fan-Cooled Motor Enclosed Worm Gear Drive for trouble-free Operation Two Speeds for Versatility Cast Iron Construction Self-Centering Vise with Angle Scale Head Rotates 45 Degrees left and right of Center Flood Coolant System (CS & FHC Models) Mist-matic Coolant System (CA Models) Heavy Duty Sheet Metal Base Adjustable Stock Stop (Models FHC315D & FHC350D only) Serrated Vise Jaws (CS) Tool Kit CA350 Circular Saw Blade Operation and Maintenance Manual Capacity Charts Two (2) Year Limited Warranty CA350 CS350 Optional Equipment: (all models) 4" 4" 4" 4" Adjustable stock stand 3" 3" 3" 3" 2" 2" 2" 2" 5 foot roller stock table 1" 1" 1" 1" 10 foot roller stock table 5"6" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" 5"6" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" 90° Round 90° Square/Rectangular 90° Round 90° Square/Rectangular Adjustable stock stop for roller stock table 4" 4" 4" 4" Optional Equipment: (CS350 & CA350 models) 3" 3" 3" 3" 2" 2" 2" 2" Adjustable stock stop 1" 1" 1" 1" 6" 5" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" Aluminum 90° vise wear plates (CA350) 45° Round 45° Square 45° Round 45° Square Steel 90° vise wear plates (CS350) Diamond shape vise wear plates FHC350D FHC315D 4" 4" Speed change kit 4" 4" 3" 3" 3" 3" Fixture mounting table (CS,CA) 2" 2" 2" 2" 1" 1" Vacuum chip removal system (CA350) 1" 1" 5" 4" 3" 2" 1" 5" 4" 3" 2" 1" (For part numbers see page 10) 5"6" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" 90° Round 90° Square/Rectangular 90° Round 90° Square/Rectangular 4" 4" 4" 4" 3" 3" 3" 3" 2" 2" 2" 2" 1" 1" 1" 1" 5" 4" 3" 2" 1" 5" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" 45° Round 45° Square 45° Round 45° Square 2 d Nonferrous Cutting Machines FHC315D CS350 FHC350D Specification CA350 CS350 FHC315D FHC350D Drive Motor 5 hp 1.5 hp/3 hp 1.5 hp/2 hp 2 hp/3 hp Angles (left & right) 45° 45° 45° 45° Electricals 208/230v. or 460v. - 3ph 208/230v. or 460v. - 3ph 230v. or 460v. - 3ph 230v. or 460v. - 3ph * The CA350 will cut Control 110v. 110v. 110v. 110v. solid material up to 4" round and square, how- Coolant Standard Standard Standard Standard ever, the feed rate must Spindle Speeds (rpm) 1700/3400 20/40 or 30/60 35/70 26/52 be reduced to avoid Max. Blade Size 14" (350mm) 14" (350mm) 121⁄2" (315mm) 14" (350mm) overloading the blade Max. Vise Opening 6" 6" 6" 6" with chips and it is Recommended Cutting Capacity strongly recommended Round tube @ 90° 5" 43⁄4" 41⁄4" 43⁄4" that the machine be fitted with an optional Round tube @ 45° 41⁄2"41⁄4"33⁄4"43⁄4" high capacity chip Square tube @ 90° 41⁄2"43⁄8"31⁄2"41⁄4" removal system. 1 1 1 Square tube @ 45° 4 ⁄2" 4" 3 ⁄8"4⁄8" Please contact the Rectangular tube @ 90° 6" x 41⁄2"51⁄2" x 43⁄8"41⁄8" x 33⁄8"51⁄2" x 4" factory for advice that Rectangular tube @ 45° 41⁄2" x 4" 4" x 4" 33⁄8" x 3" 41⁄4" x 4" is tailored to your Round solid @ 90° 4"* 23⁄4"21⁄8"23⁄8" particular requirements. Round solid @ 45° 4"* 23⁄8" 2" 21⁄8" Notes: Square solid @ 90° 4"* 23⁄4" 21⁄8" 21⁄2" 1. Solid capacities Square solid @ 45° 4"* 23⁄8" 2" 21⁄8" based on mild steel. Dimensions 2. When cutting stain- Length x Width 40" x 50" 40" x 50" 51" x 34" 51" x 34" less steel or other difficult-to-cut Height 70" 70" 59" 59" materials, use a Net Weight 800 lbs. 900 lbs. 570 lbs. 660 lbs. blade no larger than Shipping Weight 1,000 lbs. 1,100 lbs. 700 lbs. 800 lbs. 121⁄2" (315mm). 3 Pneumatic Vise Ferro Manually operated saw with pneumatic vise ideal for one-off or short production runs of steel, aluminum and tubing. Features: 208/230/460/60/3 Electricals Totally Enclosed Fan-Cooled Motor Enclosed Worm Gear Drive for trouble-free Operation Two Speeds for Versatility Cast Iron Construction Self-Centering Vise with Angle Scale Head Rotates 45 Degrees left and right of Center Flood Coolant System (CS & FHC Models) Mist-matic Coolant System (CA Models) Heavy Duty Sheet Metal Base Adjustable Stock Stop (Models FHC315D & FHC350D only) Serrated Vise Jaws (CS) Tool Kit Circular Saw Blade CA350PV Operation and Maintenance Manual Two (2) Year Limited Warranty Capacity Charts Optional Equipment: (all models) CA350PV CS350PV Adjustable stock stand 4" 4" 4" 4" 5 foot roller stock table 3" 3" 3" 3" 2" 2" 2" 2" 10 foot roller stock table 1" 1" 1" 1" Adjustable stock stop for roller stock table 6" 5" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" 90° Round 90° Square/Rectangular 90° Round 90° Square/Rectangular Optional Equipment: (CS350PV & CA350PV models) 4" 4" 4" 4" 3" 3" 3" 3" Adjustable stock stop 2" 2" 2" 2" Aluminum 90° vise wear plates (CA350PV) 1" 1" 1" 1" 6" 5" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" Steel 90° vise wear plates (CS350PV) 45° Round 45° Square 45° Round 45° Square Diamond shape vise wear plates Speed change kit FHC350P Powered overhead clamp (CA & CS) 4" 4" 3" 3" Fixture mounting table (CA & CS) 2" 2" Vacuum chip removal system (CA350PV) 1" 1" 6" 5" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" Variable vise pressure 90° Round 90° Square/Rectangular (For part numbers see page 10) 4" 4" 3" 3" 2" 2" 1" 1" 6" 5" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" 45° Round 45° Square 4 us and Nonferrous Cutting Machines CS350PV FHC350P Specification CA350PV CS350PV FHC350P Drive Motor 5 hp 1.5 hp/3 hp 2 hp/3 hp Angles (left & right) 45° 45° 45° Electricals 208/230v. or 460v. - 3ph 208/230v. or 460v. - 3ph 230v. or 460v. - 3ph * The CA350PV will cut solid material up to 4" Control 110v. 110v. 110v. round and square, how- Coolant Standard Standard Standard ever, the feed rate must Spindle Speeds (rpm) 1700/3400 20/40 or 30/60 26/52 be reduced to avoid Max. Blade Size 14" (350mm) 14" (350mm) 14" (350mm) overloading the blade Max. Vise Opening 6" 6" 6" with chips and it is Recommended Cutting Capacity strongly recommended Round tube @ 90° 5" 43⁄4"43⁄4" that the machine be fitted with an optional Round tube @ 45° 41⁄2"41⁄4"43⁄4" high capacity chip Square tube @ 90° 41⁄2"43⁄8"41⁄4" removal system. 1 1 Square tube @ 45° 4 ⁄2" 4" 4 ⁄8" Please contact the Rectangular tube @ 90° 6" x 41⁄2"51⁄2" x 43⁄8"51⁄2" x 4" factory for advice that Rectangular tube @ 45°41⁄2" x 4" 4" x 4" 41⁄4" x 4" is tailored to your particular requirements. Round solid @ 90° 4"* 23⁄4" 23⁄8" Round solid @ 45° 4"* 23⁄8"21⁄8" Notes: Square solid @ 90° 4"* 23⁄4" 21⁄2" 1. Solid capacities based on mild steel. Square solid @ 45° 4"* 23⁄8"21⁄8" Dimensions 2. When cutting stain- less steel or other Length x Width 40" x 50" 40" x 50" 51" x 34" difficult-to-cut Height 70" 70" 59" materials, use a Net Weight 900 lbs. 1,100 lbs. 680 lbs. blade no larger than Shipping Weight 1,100 lbs. 1,300 lbs. 800 lbs. 121⁄2" (315mm). 5 Semi-Automatic Ferro Semi-Automatically operated saw with pneumatic vise ideal for short to medium production runs of all steel, aluminum and tubing. Features: 208/230/460/60/3 Electricals Totally Enclosed Fan-Cooled Motor Enclosed Worm Gear Drive for trouble-free Operation Automatic Cutting Cycle Automatic feed rate Auto Shut-off & Unclamping at end of Cut (FA, FS) Cast Iron Construction Self-Centering Vise with Angle Scale Head Rotates 45 Degrees left and right of Center Flood Coolant System (FS & FHC Models) Mist-matic Coolant System (FA Models) Serrated Vise Jaws (CS) Heavy Duty Sheet Metal Base Adjustable Stock Stop (Models FHC350SA only) Foot pedal cycle start (Models FHC350SA only) FA350SA Circular Saw Blade Tool Kit Operation and Maintenance Manual Capacity Charts Two (2) Year Limited Warranty FA350SA FS350SA Optional Equipment: (all models) 4" 4" 4" 4" Adjustable stock stand 3" 3" 3" 3" 2" 2" 2" 2" 5 or 10 foot roller stock table 1" 1" 1" 1" 5"6" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" 5"6" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" Optional Equipment: (FS350SA & FA350SA models) 90° Round 90° Square/Rectangular 90° Round 90° Square/Rectangular Adjustable stock stop 4" 4" 4" 4" 3" 3" 3" 3" Aluminum 90° vise wear plates (FA350SA) 2" 2" 2" 2" Steel 90° vise wear plates (FS350SA) 1" 1" 1" 1" 6" 5" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" Diamond shape vise wear plates 45° Round 45° Square 45° Round 45° Square Short length stock stop (FA350SA) Speed change kit FHC350SA Foot pedal cycle start 4" 4" Powered overhead clamp 3" 3" 2" 2" Fixture mounting table 1" 1" Vacuum chip removal system (FA350SA) 5"6" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" 90 Square/Rectangular Variable vise pressure 90° Round ° 4" 4" Variable feed pressure 3" 3" Head/vise pressure 2" 2" 1" 1" (For part numbers see page 10) 6" 5" 4" 3" 2" 1" 6" 5" 4" 3" 2" 1" 45° Round 45° Square 6 us and Nonferrous Cutting Machines FS350SA Shown with optional stock stop FHC350SA Specification FA350SA FS350SA FHC350SA Drive Motor 5 hp 1.5 hp/3 hp 2 hp/3 hp Angles (left & right) 45° 45° 45° Electricals 208/230v.