Sloan Flush Valves

Toll Free: 800.772.2099 ■ Local Phone: 651.774.5985 ■ Fax: 651.774.7156 Section G Sloan Flush Valves

Popular Manually Operated Flush Valves for TOILETS and URINALS

Model Toilet Flush Model Urinal Flush 186 110 Valves Valves

◄ Model Select from ◄ Model Select from 180 110 shown 3.5 gallons per shown 1.5, 1.0 and 0.5 flush and 1.6 gpf gpf models; models. ■ 1¼” or ¾” ■ 1½” vacuum vacuum breaker breaker tailpiece; tailpiece; ■ 1” pipe ■ 1” pipe supply line. supply line.

Royal vs. Regal XL models —

Order The Royal models are a PREMIUM flush valve: They have dual- Description filtered bypass flush diaphragms and free-spinning vandal-resistant stop No. valve supply covers. The Royal models also have a High back pressure Permex® vacuum breaker flush connection. Other premium components Royal Urinal Flush Valves — Premium Quality throughout the Royal models means less repair over the years. Model 180, Centerline of supply 11.5” above fix- The Regal XL models utilize standard components. SN1008 ture, 3.0 gallons per flush, 1¼” top mounted urinals The “Royal” models cost more but may need to be repaired less often. Model 180-1.5, same as 180 but 1.5 gallons per Order SN1008A Description flush, for 1¼” top mounted urinals No. Model 180-1.0, same as 180 but 1.0 gallons per SN1008B Royal Toilet Flush Valves — Premium Quality flush, for 1¼” top mounted urinals Model 110, Centerline of supply 11.5” above Model 186, Centerline of supply 11.5” above fix- SN1005 SN1010 fixture, 3.5 gallons per flush ture, 1.5 gallons per flush, ¾” top mounted urinals Model 111, same as 110 but for low consumption SN1005A Model 186-1.0, same as 186 but 1.0 gallons per 1.6 gallons per flush toilets SN1010A flush, for ¾” top mounted urinals Model 113, Centerline of supply 16” above fixture, SN1006 Model 186-0.5, same as 186, but 0.5 gallons per 3.5 gallons per flush SN1010B flush for ¾” top mounted urinals Model 113-1.6, same as 113, but 1.6 gallons per SN1006D flush for low consumption toilet Regal XL Urinal Flush Valves — Good Value! Model 115, Centerline of supply 24” above fixture, SN1007 Model 180-XL, Supply centerline 11.5” above fix- 3.5 gallons per flush SN1008J ture, 3.5 gallons per flush, 1¼” top mounted urinals Model 115-1.6, same as 115, but 1.6 gallons per SN1007A Model 180-1.5XL, same as 180-XL but 1.5 gal- flush for low consumption toilet SN1008K lons per flush, for 1¼” top mounted urinals Regal XL Toilet Flush Valves — Good Value! Model 180-1.0XL, same as 180-XL but 1.0 gal- Model 110-XL, Centerline of supply 11.5” above SN1008L SN1004 lons per flush, for 1¼” top mounted urinals fixture, 3.5 gallons per flush Model 111-XL, same as 110-XL but for low Model 186-XL, Supply centerline 11.5” above SN1005C SN1010D consumption 1.6 gallons per flush toilets fixture, 1.5 gallons per flush, ¾” top mounted urinals Model 113-XL, Centerline of supply 16” above Model 186-1.0XL, same as 186-XL but 1.0 gal- SN1006G SN1010E fixture, 3.5 gallons per flush lons per flush, for ¾” top mounted urinals Model 113-1.6XL, same as 113-XL, 1.6 gallons SN1006H per flush for low consumption toilet Model 115-XL, Centerline of supply 24” above See Repair Parts SN1007C fixture, 3.5 gallons per flush on the following pages! Model 115-1.6XL, same as 115, but 1.6 gallons SN1007D per flush for low consumption toilet

Complete Valve Repair Kits The Sloan “Premium Performance” complete flush valve repair kit includes [A] Dual-Filtered Valve Kit, [B] Triple-Seal handle repair kit, [C] High back pres- Dual- sure vacuum repair kit and the [D] O-ring for the Filtered Valve Kit control stop tailpiece. Choose from different gallon- The Individual Valve per-flush (GPF) kits. Repair Parts (following page) can be used on any Sloan diaphragm operated flush valve.

Description Order No. For Toilets A-1101-A Performance kit, 1.6 GPF SO1077 A-1102-A Performance kit, 3.5 GPF SO1077A A-1103-A, Performance kit, 2.4 GPF SO1077B Repair Kits for Battery For Urinals Powered flush valves A-1106-A Performance kit, 0.5 GPF SO1078 on pages 33-34. A-1107-A Performance kit, 1.0 GPF SO1078A A-1108-A Performance kit, 1.5 GPF SO1078B Repair Parts Guide

Item Description Order No. Item Description Order No. 13 H-550, Chrome plated stop coupling SO1237 1 A-72-CP, Chrome plated outside cover SO1060 H-551-A, Chrome plated adjustable tailpiece, 2 A-71, Inside plastic cover SO1055 14 SO1240 2-1/16” long Dual-Filtered Valve Repair Kits: 15A H-553, O-Ring SO1260 Long-lasting pre-assembled kits contain the disc, dual-filtered 15B H-552, Locking Ring SO1253 diaphragm, relief valve & guide as pictured in item 3 above. H-700-A, Chrome plated 1” control stop SO1280 16 A-1041-A, allows 1.6 gallons per flush, Toilet SO1076B H-700-A, Chrome plated 3/4” control stop SO1275 A-1038-A, allows 3.5 gallons per flush, Toilet SO1076A H-541-A, Control stop repair kit for H-700-A 1” and SO1250 3 A-1043-A, allows 0.5 gallons per flush, Urinal SO1076D 3/4”, also for the H-600-A 1” control stops 17 A-1042-A, allows 1.0 gallons per flush, Urinal SO1076C H-543-A, Control stop repair kit, used with the SO1235 A-1037-A, allows 1.5 gallons per flush, Urinal SO1076 H-600-A 3/4” control stops 4 B-73-A, “Triple Seal” handle assembly SO1109 H-622, Chrome plated bonnet for the H-700-A 1” & SO1274 5 A-6, Chrome plated handle coupling SO1010 3/4”, and the H-600-A 1” control stops 18 6 B-7-A, Chrome plated socket assembly SO1080 H-577, Chrome plated bonnet, used with the Discontinued 7 B-74-A, Chrome plated handle grip only SO1109A H-600-A 3/4” control stops 8 B-51-A, “Triple Seal” handle repair kit SO1106 H-1010-A, Vandal resistant control stop cap, for SO1258 8A B-39, Handle seal only SO1095 H-700-A 1” & 3/4”, the H-600-A 1” control stops 19 9 A-31, Handle gasket SO1030 H-1009-A, Vandal resistant control stop cap, used SO1257 F-5-A, 3/4” Chrome plated spud coupling assembly SO1195 with the H-600-A 3/4” control stops 10 F-5-A, 1¼” Chrome plated spud coupling assembly SO1200 H-573, Control stop cap, standard, for the H-700-A SO1270 F-5-A, 1½” Chrome plated spud coupling assembly SO1205 1” & 3/4”, and H-600-A 1” control stops 20 11 V-651-A, High back pressure vacuum breaker kit SO1386 H-582, Control stop cap, standard, used with the H- SO1265 V-600-AA, 3/4” x 9” vacuum breaker, 9” tailpiece SO1361 600-A 3/4” control stops 12 V-600-AA, 1¼ x 9” vacuum breaker, 9” tailpiece SO1372 21 H-574, Control stop cap with bumper SO1262 V-600-AA, 1½” x 9” vacuum breaker, 9” tailpiece SO1377 22 H-576, Control stop cap with extended bumper SO1263

Sloan Flush Valve Individual Valve Repair Parts 3 See inset for 20A Individual Valve Repair Parts. Relief Disc Valve

Diaphragm

Repair Kits for Battery Powered Guide flush valves on Assembly pages 33-34. includes refill head and flow ring Individual Valve Repair Parts can be used on any Sloan diaphragm operated flush valve. Order Individual Valve Repair Parts No. Relief Valve for standard toilet. A-19-AC SO1020 Relief Valve for standard urinal. A-19-AU SO1025 Relief Valve for low-consumption toilet SO1026 and urinal valves with “LC” on cover. Disc on top of diaphragm. A-15-A SO1015 Diaphragm only, Single-Filtered, A-156-A SO1065 Diaphragm Kit, includes diaphragm, disc, SO1070 Repair Parts Guide handle seal and handle gasket. A-156-AA Guide Assembly , A-163-A SO1075

Order Order Item Description Item Description No. No. 1 A-72-CP, Chrome plated outside cover SO1060 16 V-551-A, vacuum breaker repair kit SO1385 2 A-71, Inside plastic cover SO1055 V-500-AA, ¾” x 9” vacuum breaker, 9” tailpiece SO1360 Standard Valve Kits for both ROYAL & REGAL models (Item 3): 17 V-500-AA, 1¼ x 9” vacuum breaker, 9” tailpiece SO1370 Pre-assembled kits contain the disc, a single-filtered diaphragm, relief valve & guide. See picture of kit in upper right-hand corner of this page. V-500-AA, 1½” x 9” vacuum breaker, 9” tailpiece SO1375 A-36-A, — allows 4.5 gallons per flush, toilet SO1040 18 H-550, Chrome plated stop coupling SO1237 H-551-A, Chrome plated adjustable tailpiece, A-37-A, — allows 1.5 gallons per flush, urinal SO1045 19 SO1240 2-1/16” long with lock ring and O-ring A-38-A, — allows 3.5 gallons per flush, toilet SO1050 3 A-41-A, — allows 1.6 gallons per flush, toilet SO1052 20 H-553, O-Ring SO1260 A-42-A, — allows 1.0 gallons per flush, urinal SO1053 20A H-552, Locking Ring SO1253 A-43-A, — allows 0.5 gallons per flush, urinal SO1053A H-740-A, Chrome plated 1” control stop SO1294B 21 12-13 B-32-A, Complete handle assembly (items 12-13) SO1090 H-740-A, Chrome plated ¾” control stop SO1294A 10 A-6, Chrome plated handle coupling SO1010 H-541-A, Control stop repair kit for H-740-A 1” and SO1250 11 B-7-A, Chrome plated socket assembly SO1080 ¾”, also for the H-540-A 1” control stops 22 12 B-32, Chrome plated handle grip only SO1085 H-543-A, Control stop repair kit, used with the SO1235 13 B-50-A, Handle repair kit SO1105 H-540-A 3/4” control stops 8 B-39, Handle seal only SO1095 H-639, Chrome plated bonnet for the H-740-A 1” & SO1274H 14 A-31, Handle gasket SO1030 ¾”, and the H-540-A 1” control stops F-5-A, ¾” Chrome plated spud coupling assembly SO1195 23 H-538, Chrome plated bonnet, used with the F-5-A, 1” Chrome plated spud coupling assembly SO1200 0308601 15 H-540-A ¾” control stops F-5-A, 1¼” Chrome plated spud coupling assembly SO1205 F-5-A, 1½” Chrome plated spud coupling assembly SO1210 24 H-37, Chrome plated cap for bonnet SO1215

Valve Head Repair Parts Replacement Handle Parts

3. Relief Valve

1. Disc

2. Diaphragm

4. Guide Assembly Item Order Description Includes refill head No. No. and flow ring Standard length chrome plated handle SO1090 assembly, Sloan No. B-32-A 1. Valve Disc Only 4 ADA approved longer chrome plated handle SO1109 Order assembly, Sloan No. B-73-A Description No. Handle coupling, chrome plated 5 SO1010 A-15-A Disc, goes on top of diaphragm SO1015 Sloan No. A-6 Socket assembly, chrome plated 6 SO1080 Sloan No. B-7-A 2. Diaphragms Standard length handle grip only, chrome SO1085 plated, Sloan No. B-32 Order 7 Description ADA approved longer handle grip only, No. SO1109A chrome plated, Sloan No. B-74-A A-156-A, Standard diaphragm only for “Royal” & Standard handle seal can be used on all SO1065 8A SO1095 “Regal” manual flush models. Sloan flush valves, Sloan No.B-39 The replacement diaphragm for the Premium Quality Royal 8 Standard handle repair kit (also shown below) SO1105 “dual-filtered” units are not available separately. Order the appropriate kit on the preceding pages. 9 Handle gasket, A-31 SO1030

3. Relief Valves Handle Repair Kits Order Description 1A. No. 1. A-19-AC, Relief valve for standard toilet flush valves SO1020 2. A-19-AU, Relief valve for standard urinal flush valves SO1025 A-19-ALC, Relief valve for low consumption urinal SO1026 & toilet flush valves marked “LC” on valve cover Item Order Description No. No. 4. Guide Assemblies B50A, Standard handle repair kit used on all 1. SO1105 Sloan manually operated flush valves Order Description No. 1A. B-39, Handle seal only: comes with B50A kit SO1095 B51A, Premium handle repair kit with “Triple A-163-A Guide Assembly, includes refill head and SO1075 2. Seal” handle seal. PERMEX synthetic rubber SO1106 flow ring (adjustable to control water volume) resists harsh water and lasts longer!

Vacuum Breaker Assemblies O-Ring Style Tailpieces 2 1 The “standard” V-500 vacuum breaker assemblies were Description Order No. provided with all Sloan “Royal” and “Regal” flush valves up to Item 1 — Lock Ring SO1253 1998. In January of 1998 Sloan began providing the high per- Item 2 — O-Ring SO1260 formance premium V-600 vacuum breaker assemblies on their Complete 2-1/16” long tailpiece SO1240 “Royal” flush valves, while keeping the standard V-500 vac- Complete 3-1/16” long tailpiece SO1245 uum breaker on the more economically priced “Regal” model of flush valve. Coupling Assemblies Order Description V-600 vacuum No. Description Order No. breaker assem- ¾” coupling assembly SO1145 Standard VB Assemblies blies utilize 1” coupling assembly SO1150 vacuum breakers V-500-A, Vacuum breaker SO1355 1¼” coupling assembly SO1155 made from assembly less tailpiece 1½” coupling assembly SO1160 “Permex.” This V-500-AA, Vacuum breaker Repair Parts material is better SO1360 with 3/4” x 9” tailpiece Coupling Assembly Item 1 — ¾” gasket SO1185 able to handle the V-500-AA, Vacuum breaker includes items Item 1 — 1” gasket SO1190 higher back pres- SO1362 1, 2 and 3 sures associated with 3/4” x 15” tailpiece Item 1 — 1¼” gasket SO1191 with low water V-500-AA, Vacuum breaker Item 1 — 1½” gasket SO1192 SO1365 consumption toilets with 1” x 9” tailpiece Item 2 — ¾” ring SO1165 and urinals. V-500-AA, Vacuum breaker Item 2 — 1” ring SO1170 SO1370 with 1-1/4” x 9” tailpiece Item 2 — 1¼” ring SO1175 V-500-A Item 2 — 1½” ring SO1180 V-500-AA, Vacuum breaker V-600-A SO1375 with 1-1/2” x 9” tailpiece Spud Coupling Trim V-500-AA, Vacuum breaker SO1380 with 1-1/2” x 21-1/2” tailpiece Description Order No. ¾” spud coupling trim SO1195 V-500-AA, Vacuum breaker SO1383 1 with 1-1/2” x 24-1/2” tailpiece 1” spud coupling trim SO1200 1¼” spud coupling trim SO1205 2 Premium VB Assemblies 1½” spud coupling trim SO1210 V-600-A, Vacuum breaker SO1375A Repair Parts V-500-AA assembly less tailpiece Item 1 — ¾” ring SO1165 V-600-AA V-600-AA, Vacuum breaker Item 1 — 1” ring SO1170 SO1361 with 3/4” OD x 9” tailpiece Item 1 — 1¼” ring SO1175 The spud coupling trim includes V-600-AA, Vacuum breaker Item 1 — 1½” ring SO1180 all items pictured SO1363 with 3/4” OD x 15” tailpiece Item 2 — ¾” gasket SO1185 directly above V-600-AA, Vacuum breaker Item 2 — 1” gasket SO1190 SO1372 with 1¼” OD x 9” tailpiece Item 2 — 1¼” gasket SO1191 V-600-AA, Vacuum breaker Item 2 — 1½” gasket SO1192 SO1373 with 1¼” OD x 21½” tailpiece Contents of B-40-A Kit V-600-AA, Vacuum breaker SO1377 Pedal Push with 1½” OD x 9” tailpiece Tailpiece Button Repair * V-600-AA, Vacuum breaker SO1378 with 1½” OD x 13½” tailpiece Kit For Description Order No. V-600-AA, Vacuum breaker Exposed B-40-A, complete kit SO1100 SO1380A with 1½” OD x 21½” tailpiece Flush Valve B-39, *Seal only SO1095

Vacuum Breaker Kits Vacuum Breaker Kit for Old V100A Order Order Description Description No. No. V-551-A, standard vacuum V-101-A, Repair Kit to convert old style (pre-1971) SO1385 breaker repair kit V100 vacuum breaker into a code compliant V- 500 vacuum breaker. Directions: knock-out the SO1325 V-651-A, premium “Permex” SO1386 old vacuum breaker interior and replace with the vacuum breaker repair kit components of this kit (not pictured).

G2 Optima Automatic Flush Valves — New Style since 2003

G2 Optima Plus G2 Optima Plus Battery-Powered Battery-Powered Sensor Operated Sensor Operated Toilet Flush Urinal Flush Valves Valves

These new G2 Sloan Optima Plus sensor op- These new G2 Sloan Optima Plus sensor operated toilet flush valves run for years on one erated urinal flush valves run for years on one set of 4 “AA” batteries. set of 4 “AA” batteries. ■ Batteries can be changed without turning off ■ Batteries can be changed without turning off the water — 8 second arming delay. the water — 8 second arming delay. ■ Courtesy flush override button allows for ■ Range adjustment control for eliminating manual flushing; Range adjustment control. false flushing; courtesy flush button. ■ Select from 3.5 or 1.6 gallons per flush ■ Select from 1.5, 1.0 or 0.5 gallons per flush ■ Sentinel flush once every 24-hours. ■ Sentinel flush every 24-hours. 3/4” vacuum ■ 1½” vacuum breaker tailpiece. breaker tailpiece ■ 1¼” or ¾” vacuum breaker tailpiece. ■ 1” pipe water supply connection. shown ■ ¾” pipe water supply connection.

Model ► Model ► 8110 8186 shown shown

Order Order Description Description No. No. G2 Optima Plus Toilet flush valves — Battery Powered G2 Optima Plus Urinal flush valves — Battery Powered Model 8110, Centerline of supply 11.5” above top Model 8180, Centerline of supply 11.5” above fix- SN1155 SN1160 of fixture, 3.5 gallons per flush, 1½” top connection ture, 3.5 gallons per flush, 1¼” top mounted urinals Model 8111, same as 8110, but 1.6 gallons per Model 8180-1.5, same as 8180 but 1.5 gallons SN1157 SN1161 flush for low consumption toilets, 1½” top connection per flush, for 1¼” top mounted urinals Model 8113, Centerline of supply 16” above top of Model 8180-1.0, same as 8180 but 1.0 gallons SN1158 SN1159 fixture, 3.5 gallons per flush, 1½” top connection per flush, for 1¼” top mounted urinals Model 8113-1.6, same as 8113, but 1.6 gallons per Model 8186, Centerline of supply 11.5” above fix- SN1158A SN1167 flush for low consumption toilet, 1½” top connection ture, 1.5 gallons per flush, ¾” top mounted urinals Model 8115-1.6, Centerline of supply 24” above top Model 8186-1.0, same as 8186 but 1.0 gallons SN1157D SN1166 of fixture,1.6 gallons per flush, 1½” top connection per flush, for ¾” top mounted urinals Model 8116-1.6, Centerline of supply 27” above top Model 8186-0.5, same as 8186, but 0.5 gallons SN1158B SN1164 of fixture, 1.6 gallons per flush, 1½” top connection per flush for ¾” top mounted urinals

See the detailed specification sheets at www.StateSupply.com

Sloan G2 Optima Diaphragm Kits

Regulator Only O-Ring

19A

Flex Tube Diaphragm Flex Tube KIT Diaphragm

Diaphragms only not available

Flex Tube Diaphragm Kits Order No. For Urinal, 0.5 gpf (EBV-1023-A) SO1115E For Urinal, 1.0 gpf (EBV-1022-A) SO1115D For Urinal, 1.5 gpf (EBV-1022-A) For Urinals with 3.5 gpf and all Toilets SO1115A With 1.6, 3.5 and 4.5 gpf (EBV-1020-A) Replacement Regulators Only For Urinal, 0.5 gpf (EBV-95, Green) SO1133F For Urinal, 1.0 gpf (EBV-95, Green) Complete G2 OLD style Optima For Urinal, 1.5 gpf (EBV-102-2, Black) SO1133H Optima Plus Plus made from For Urinal, 3.5 gpf (EBV-102-1, White) SO1133G Flush Valves 1992 to 2003 For Toilet, 1.6 gpf (EBV-95, Green) SO1133F Current Models Order repair parts Repair parts below on following page. For Toilet, 3.5 gpf (EBV-102-1, White) SO1133G

Order The above repair parts fit the G2 Optima battery-powered Item Description flush valves: Introduced in May, 2003 to replace the first genera- No. tion Optima Plus automatic flush valves made from 1992 until 2002. F-5-A, ¾ Spud coupling, chrome plated (CP) SO1195 16 F-5-A, 1¼ Spud coupling, CP SO1205 Order Item Description F-5-A, 1½ Spud coupling, CP SO1210 No. 17 H-550, Stop coupling, CP SO1237 EBV-138-A, G2 cover/ring/sensor assembly — Toilet SO1134T 1 18 H-551-A, Adjustable tailpiece 2-1/16” long, CP SO1240 EBV-139-A, G2 cover/ring/sensor assembly — Urinal SO1134U 19 H-553, O-Ring for tailpiece SO1260 2 EBV-142-A, Cover assembly SO1134X 19A H-552, Locking ring SO1253 3 EBV-130-A, Override button assembly with tool, screws SO1134L H-700-A, Water control stop complete, 1” CP SO1280 4 EBV-131, Lens window cover SO1134M 20 H-700-A, Water control stop complete, ¾” CP SO1275 5 EBV-14, Locking ring SO1116A H-541-A, Control stop kit for H-700-A 1” and ¾” EBV-129-AC, G2 Electronic Module for Toilets SO1134J SO1250 6 21 and H-600-A 1” screwdriver water control stops EBV-129-AU, G2 Electronic Module for Urinals SO1134K H-543-A, Control stop kit for H-600-A ¾” SO1235 7 EBV-134, Cover Rest plate SO1134P H-622, Bonnet for H-700-A 1” and ¾” and 8 EBV-145-A, G2 inside cover assembly with solenoid SO1134Z SO1274 22 H-600-A 1” screwdriver water control stops 9 EBV-136-A, Solenoid only (for G2 modules only) SO1134R H-577, Bonnet for H-600-A ¾” water control stop SO1272 10 Valve repair kits and parts — See inset above H-1010-A, Vandal-resistant cap for H-700-A 1” and SO1258 11 EBV-91, Trimpot adjustment screwdriver SO1116E ¾” and H-600-A 1” screwdriver water control stops 23 12 EBV-22, Strap wrench for maintenance & service SO1116F H-1009-A, Vandal-resistant cap for H-600-A ¾” SO1257 13 EBV-137, Hex wrench, 7/64 size BM1045 water control stop 14 V-651-A, Vacuum breaker repair kit SO1386 EBV-1019-A, Decorative stop cap, ¾” SO1134C 24 V-600-A, ¾ x 9” chrome plated vacuum breaker SO1361 H-574, Decorative stop cap, 1” SO1262 15 V-600-A, 1¼ x 9” chrome plated vacuum breaker SO1372 25 EBV-1018-A, Handle cap — Decorative SO1134B V-600-A, 1½ x 9” chrome plated vacuum breaker SO1377 26 EBV-1017-A, Handle cap — Metal SO1133

Sloan Optima Plus

Diaphragm Kits

See Guide to Repair Kits on Next Page OLD style Optima Plus made from Regulator 1992 to 2003. Only

Order repair parts below. 16A

Flex Tube Diaphragm Flex Tube KIT Diaphragm

Diaphragms not sold separately

Order Flex Tube Diaphragm Kits No. For Urinal, 0.5 gpf (EBV-1023-A) SO1115E For Urinal, 1.0 gpf (EBV-1022-A) SO1115D For Urinal, 1.5 gpf (EBV-1022-A) For Urinals with 3.5 gpf and all Toilets SO1115A With 1.6, 3.5 and 4.5 gpf (EBV-1020-A) Replacement Regulators Only For Urinal, 0.5 gpf (EBV-95, Green) SO1133F For Urinal, 1.0 gpf (EBV-95, Green) For Urinal, 1.5 gpf (EBV-102-2, Black) SO1133H For Urinal, 3.5 gpf (EBV-102-1, White) SO1133G For Toilet, 1.6 gpf (EBV-95, Green) SO1133F For Toilet, 3.5 gpf (EBV-102-1, White) SO1133G

Order The above repair parts fit the Optima Plus battery-powered flush Item Description valves: The Optima Plus model was manufactured from 1992-2003. No. Replaced in 2003 by the G2 Optima battery-operated flush valves. F-5-A, ¾” spud coupling, chrome plated SO1195 Order 13 F-5-A, 1¼” spud coupling, chrome plated SO1205 Item Description No. F-5-A, 1½” spud coupling, chrome plated SO1210 1 EBV-14, Locking ring SO1116A 14 H-550, Stop coupling, chrome plated SO1237 2A EBV-11, Plastic Cover for urinal (SO1116) Discontinued 15 H-551-A, Adjustable tailpiece, 2-1/16”, chrome plated SO1240 2B EBV-38-A, Plastic Cover with override (SO1117) Discontinued 16 H-553, O-Ring SO1260 2C EBV-55-A, Metal Cover for urinal SO1118 H-700-A, Water control stop complete, 1” CP SO1280 17 2D EBV-60-A, Metal Cover with override button for toilet SO1118A H-700-A, Water control stop complete, ¾” CP SO1275 3 EBV-67, Cover gasket SO1116C H-541-A, Control stop kit for H-700-A 1” and ¾” and SO1250 EBV-146-A-U, Electronic Module for Urinal SO1114E 18 H-600-A 1” screwdriver water control stops 4 EBV-146-A-C, Electronic Module for Toilet SO1114B H-543-A, Control stop kit for H-600-A ¾” SO1235 H-622, Bonnet for H-700-A 1” and ¾” and 5 EBV-21-A, Inside cover assembly with solenoid SO1116B SO1274 H-600-A 1” screwdriver water control stops 6 EBV-144-A, Isolated solenoid operator SO1133J 19 H-577, Bonnet for H-600-A ¾” water control stop SO1272 7 See “Diaphragm Kit” inset chart above H-1010-A, Vandal-resistant cap for H-700-A 1” and SO1258 8 EBV-46-A, Beam deflector SO1134 ¾” and H-600-A 1” screwdriver water control stops 20 9 EBV-1017-A, Handle cap—Metal SO1133 H-1009-A, Vandal-resistant cap for H-600-A ¾” SO1257 10 EBV-1018-A, Handle cap—Decorative SO1134B water control stop 11 V-651-A, Vacuum breaker repair kit SO1386 21 EBV-1019-A, Decorative stop cap, ¾” SO1134C V-600-A, ¾ x 9” vacuum breaker assembly SO1361 H-574, Decorative stop cap, 1” SO1262 12 V-600-A, 1¼ x 9” vacuum breaker assembly SO1372 22 EBV-91, Trimpot adjustment screwdriver SO1116E V-600-A, 1½ x 9” vacuum breaker assembly SO1377 23 EBV-22, Disposable strap wrench SO1116F

Guide to Repair Kits Sloan Automatic Retrofit Kits for Manual Sloan Flush Valves Model RESS-U for URINALS ■ Select Urinal or Toilet Retrofit Kits! The Flush Volume of the Optima Plus is controlled by the ■ PERMEX™ Synthetic Rubber Dia- Regulator in the Flex Tube Diaphragm Kit. phragm with Dual Filtered Fixed Bypass. Regulators are identified by color. ■ ADA Compliant OPTIMA Plus® Battery Powered Infrared Sensor for automatic REFERENCE CHART “No Hands” operation. Before Gallons Regulator ■ Isolated Latching Solenoid Operator, Fixture per Flush Color isolates magnetic components from wa- 0.5 gpf Green ter contact. Engineered Metal Cover with Replace- 1.0 gpf Green ■ Urinal able Lens Window. 1.5 gpf Black ■ User-friendly three (3) second Flush 3.5 gpf White Delay and Courtesy Flush™ Override Button. Notes: ■ Four (4) Size AA Batteries factory in- A 0.5 gpf Urinal kit can be converted to a 1.0 gpf by cut- stalled. ting and removing the smooth A-164 Flow Ring from the “Low Battery” Flashing LED. Guide. RESS-U G2 Optima Plus valves are supplied with ■ Infrared Sensor Range Adjustment multiple Regulators to address multiple flushing applica- Screw tions. The product is shipped with its lowest flush volume ■ Initial Set-up Range Indicator Light configuration. (first 10 minutes). AFTER

To convert the flush to a higher flushing volume, simply ■ Diaphragm, Stop Seat and Vacuum change the Regulator. When installing a new Regulator on Breaker molded from PERMEX™ Rubber a Flex Tube Diaphragm Kit, be sure to push the Regulator Compound for Chloramine Resistance. past the O-ring when Installing. Note: Never use more water than needed. Low Consumption water closets and urinals will not function properly on excess water.

See previous page for repair kit ordering guide. Contents of Retrofit Kit Model RESS-C for TOILETS Includes everything shown here except the The Flush Volume of the RESS-C is controlled by the existing Flushometer Regulator in the Flex Tube Diaphragm Kit. Regulators are identified by color.

REFERENCE CHART Gallons Regulator Fixture per Flush Color 1.6 gpf Green 3.5 gpf White Toilet 4.5 gpf White 2.4 gpf Blue European Notes:

For a 4.5 gpf Water Closet flush, use the EBV-1020-A kit (see previous page) with the White Regulator. Cut and remove the A-164 Flow Ring from the Guide. RESS-C G2 Not included with Optima Plus valves are supplied with multiple Regulators Retrofit kit to address multiple flushing applications. The product is shipped with its lowest flush volume configuration. To Order convert the flush to a higher flushing volume, simply Description change the Regulator. Never use more water than No. needed. Low Consumption water closets and urinals will Model RESS-C, Optima Top-Mount not function properly on excess water. Battery-Powered Retrofit Kit for TOILETS (3.5 SN1170 See previous page for repair kit ordering guide. GPF) and Urinals (1.6 GPF). Field adjustable.

Over-the-Handle Automatic Flush Valve Kit INSTALLS IN MINUTES! “Slide it Over-the-Handle” for Automatic Valve Operation

Easy Installation Sloan SMOOTH™ works out of the box and installs in minutes. Simply slide the unit over the flush valve’s handle and tighten the clamp!

Model EBV-200-A converts manually operated closet and urinal flush valves into automatic, sensor operated valves. Battery powered, sensor activated — No need to remove the existing handle!

• Sensor with Automatic Range Adjustment • Chrome Plated Metal Sensor Housing Sensing • Push-Lever Manual Override Flush Handle Eye • Four (4) Size C Batteries included • “Low Battery” Flashing LED • “User in View” Flashing LED • Installation requires only a standard screwdriver • 25 to 80 psi Operating Range

Automatic Sloan SMOOTH™ equipped flush valves provide the ultimate in sani- Want to flush it tary protection and automatic operation. There is no need for AC manually? hookups or wall alterations. The Flushometer operates by means of a battery powered infrared sensor. Once the user enters the sensor’s Go ahead with the effective range and then steps away, the SMOOTH™ Unit initiates the flushing cycle to flush the fixture. State-of-the-art technology enables manual override activation of a manual override without “double flushing” occurring as flush handle! the user departs (locks out sensor for approximately 10 seconds). ELECTRICAL RATINGS Order Description No. ■ Control Circuit: 6 VDC Input, battery-powered ■ OPTIMA Sensor Type: Active Infrared with Automatic Ad- SMOOTH: Side-Mounted Operator, Over-the-Handle justment OPTIMA Sensor Range -- Model EBV-200-A: The EASY way to bring battery ● Normal Range: 26” - 32” -operated automatic sensing operation to both your ● Reduced Range: 20” - 26” urinal and toilet flush valves. Batteries included.

■ Battery Type: (4) Size C Alkaline No need to remove the current, manually operated SO1114T ■ Battery Life: 2 Years @ 4,000 Flushes/Month flush valve handle. Powered by four “C” batteries ■ Indicator Lights: User in View/Low Battery that will last for two years @ 4,000 flushes per ■ Operating Pressure: 25-80 psi month, or use the Manual Override Flush Handle!

Fits both Toilet and Urinal Flush Valves!

Side-Mount Retrofit Automatic Flush Valves for TOILETS and URINALS

Convert Manual Handle Flush Valves into Side Mount Operator for Toilets and Urinals Automatic, Battery-Powered Flush Valves Battery Compartment Easily convert any existing Sloan manually operated flush You get all Wrench valve into an Automatic Battery-Operating Sensor Operated this when Courtesy Flush Button Flush Valve. One set of 4 “C” batteries can power this side- you order! mounted operated valve for up to 2 years @ 3,000 flushes per month. 24-hour sentinel flush to keep fixtures clean. Collar Gasket Collar Wrench 4 “C” Alkaline Batteries

INSTALLATION of the Side-Mount Operator

Use the collar wrench to ■ Using the supplied collar wrench, remove handle from flush both remove the handle and install the valve. On some flush valves with a faulty air vent, or recently side-mount operator. flushed valve, be prepared to collect a small amount of water with a rag or sponge placed under the handle.

■ Place collar gasket into collar nut and attach the Side Mount Operator unit where the handle was removed.

■ Tighten collar nut with supplied collar wrench.

Note: Save the handle in the event you wish to reuse the handle while you service or replace the Side Mount Operator.

Side-Mount Operator for both Toilets and Urinals Order Economically Priced and Saves Water! No.

Model EBV-89A-M, Chrome plated metal cover with low-battery indicator light and courtesy flush button. For Sloan and Zurn brand flush valves. Batteries included. Wow! SO1119A

The Side Mount Operator sends out a continuous infrared beam that is reflected back by the presence of a person in front of the urinal or toilet. “Object Lock” technology differentiates between someone walking past the unit or actually using the fixture.

Can be used on standard rough-in Sloan Royal, Regal, Crown and Naval brand flush valves as well as on flush valves manufactured by Zurn.

AC Electrical Operated Flush Valves for TOILETS and URINALS

Toilet Flush Urinal Flush Select from 1.5, 1.0 and 0.5 gallons per ◄ Model Valves Valves flush (gpf) Royal 110ES-S Exposed models. model Select from 3.5 gallons shown per flush and 1.6 gpf ■ 1¼” (Model 180) or Royal models. ¾” (Model 186) vacuum breaker tailpiece. ■ 1½” bottom or back con- ■ 1” pipe supply line. nection (for concealed flush EL-1500 Self-Adaptive valve) to top or back supply Infrared Sensor with Concealed of toilet. ◄ Model Indicator Light Design 1” pipe supply line. 180ES-S ■ shown ■ Non-Hold-Open Inte- ■ Self-Adaptive Infrared gral Solenoid Operator Front of Sensor with Indicator Light ■ Chrome Plated Wall Wall ■ User friendly three (3) Cover Plate (for 2-gang second Flush Delay Electrical Box) with Van- 1¼” vacuum dal Resistant Screws ■ Courtesy Flush Override breaker tailpiece Button shown ■ 1” I.P.S. Screwdriver ■ Chrome Plated Wall Cover Bak-Chek™ Angle Stop Plates (for 2-gang Electrical ■ Free Spinning Vandal Box) with Vandal Resistant Resistant Stop Cap Screws ■ Adjustable Tailpiece

Exposed Design

Order Order Description - All models end with “ES-S” Description - All models end with “ES-S” No. No. Exposed Sloan AC Electrical TOILET Flush Valves Exposed Sloan AC Electrical URINAL Flush Valves Model 110, Centerline of supply 11.5” above fix- Model 180, Centerline of supply 11.5” above fix- SN1011 SN1011T ture, 3.5 gallons per flush, 1½” top mount ture, 3.5 gallons per flush, 1¼” top mounted urinals Model 180-1.5, same as 180 but 1.5 gallons per Model 111, same as 110 but for low consumption SN1011S SN1011A flush, for 1¼” top mounted urinals 1.6 gallons per flush toilets, 1½” top mount Model 180-1.0, same as 180 but 1.0 gallons per SN1011R Concealed Sloan TOILET Flush Valves flush, for 1¼” top mounted urinals Similar to above, but the valves are concealed behind the wall. Model 186, Centerline of supply 11.5” above fix- SN1012 Only the Sensor’s electrical box is visible. For back supply Toilet. ture, 1.5 gallons per flush, ¾” top mounted urinals Model 152, same as 110, but valve is concealed Model 186-1.0, same as 186 but 1.0 gallons per SN1011M SN1012A behind wall, 3.5 gallons per flush, 1½” back mount flush, for ¾” top mounted urinals Model 152-1.6, same as 111, but valve is con- Model 186-0.5, same as 186, but 0.5 gallons per SN1011N SN1012B cealed behind wall, 3.5 gpf, 1½” back mount flush for ¾” top mounted urinals

Transformers sold separately. See next page. For more detailed information please visit www.statesupply.com/sloanvalve

Electronic Hard-Wire Operated

Solenoid and Sensor Parts and Repair Kits

Order Item Parts Description for AC Electrical No. Sloan Manual to Automatic Retro Kits 3305043, EL-128-A Actuator Cartridge 1A SO1142 Assembly Repair Kit. ■ Select from Urinal or Toilet Retrofit Kits! ■ PERMEX™ Synthetic Rubber Diaphragm 0305329, EL-124-2 CP 24 VAC with Dual Filtered Fixed Bypass. 2A SO1140 Before Solenoid Assembly ■ ADA Compliant OPTIMA Plus® Battery Powered Infrared Sensor for automatic “No Hands” operation. 0305331, EL-138-2 RB 24 VAC 2B SO1143 ■ Isolated Latching Solenoid Operator, iso- Solenoid Assembly lates magnetic components from water contact. Battery 0305165, EL-163-A Solenoid Shaft 3C SO1120 Engineered Metal Cover with Replaceable Powered! Assembly ■ Lens Window. 4A 0301082, A-6 CP Handle Coupling ■ User-friendly three (3) second Flush Delay and Courtesy Flush™ Override Button. SO1010 ■ Four (4) Size AA Batteries factory installed. 4B 0301082, A-6 CP Handle Coupling “Low Battery” Flashing LED. ■ Infrared Sensor Range Adjustment Screw 9A 0305125, EL-101 CP Nut for Solenoid SO1141 ■ Initial Set-up Range Indicator Light (first 10 minutes). AFTER 3305620, EL-1500 Urinal Sensor ■ Diaphragm, Stop Seat and Vacuum 19 SO1122 Replacement Kit (Urinal only) Breaker molded from PERMEX™ Rubber Compound for Chloramine Resistance.

3305621, EL-1500-L Closet Sensor Order 20 SO1123 Description Replacement Kit (Closet only) No. 0345154, EL-154 Transformer Model RESS-U, Optima Top-Mount SO1119 SN1183 (120 VAC) Battery-Powered Retrofit Kit for URINALS 21 0345999, EL-342 Transformer Model RESS-C, Optima Top-Mount SO1120T SN1170 (240 VAC) Battery-Powered Retrofit Kit for TOILETS

Item Description Order No. Valve Repair Kits 22 0301172, A-72 chrome plated Cover SO1060 & Parts for 23 0301168, A-71 Inside Cover SO1055 24 See Valve Repair Kits in bottom corner, below Electronic Valves 25 3323182, V-651-A Vacuum Breaker Repair Kit SO1386 0393004, V-600-AA 3/4" x 9" chrome plated SO1361 Vacuum Breaker 0393006, V-600-AA 1-1/4" x 9" chrome plated 26 SO1372 Vacuum Breaker 0393007, V-600-AA 1-1/2" x 9" chrome plated SO1377 Vacuum Breaker 0306125, F-5-AW 3/4" chrome plated SO1195 Spud Coupling Assembly Valve Repair Kit 0306140, F-5-AU 1-1/4" chrome plated 27 SO1205 Spud Coupling Assembly 0306146, F-5-AT 1-1/2" chrome plated SO1210 Spud Coupling Assembly 28 0308676, H-550 chrome plated Stop Coupling SO1237 0308801, H-551-A chrome plated Adjustable Tail 29 SO1240 2-1/16" long 30 5308696, H-553 “O” Ring SO1260 3308386, H-700-A 1" Screwdriver Bak-Chek® Angle SO1280 Stop chrome plated - complete 31 3308384, H-700-A 3/4" Screwdriver Bak-Chek® SO1275 Angle Stop chrome plated - complete 3308853, H-541-A-SD Control Stop Repair Kit for use with 1" & 3/4" H-700-A , 1" H-600-A, 1" & SO1250 3/4" H-740-A and 1" H-540-A screw driver Stops 32 3308856, H-543-A-SD Control Stop Repair Kit for use with 3/4" H-600-A and H-540-A screw driver SO1235 Stops 0308612, H-622 chrome plated Bonnet for use with SO1274 1" & 3/4" H-700-A and 1" H-600-A screw driver Stops 33 0308843, H-577 chrome plated Bonnet for use with SO1272 3/4" H-600-A screw driver Stops 3308791, H-1010-A 1" Vandal Resistant Control Stop Cap Assembly for use with 1" & 3/4" H-700-A and 1" SO1258 H-600-A screw driver Stops 34 3308790, H-1009-A 3/4" Vandal Resistant Control Stop Cap Assembly for use with 3/4" H-600-A SO1257 screw driver Stops 0308840, H-573 1" Control Stop Cap chrome plated Valve Repair Kits for use with 1" & 3/4" H-700-A and 1" H-600-A SO1270 35 screw driver Stops 0308848, H-582 3/4" Control Stop Cap chrome plated SO1265 for use with 3/4" H-600-A screw driver Stops 3308866, H-574 1" Control Stop Cap with Bumper 36 for use with 1" & 3/4" H-700-A and 1" H-600-A SO1262 screw driver Stops 3308867, H-576 1" Control Stop Cap with Extended 37 Bumper for use with 1" & 3/4" H-700-A and 1" SO1263 H-600-A screw driver Stops 3308860, H-1006-A Repair Kit for 1" Stops with Concealed WH for use with 1" H-700, H-600, and SO1294J H-540 wheel handle Series Stops 38 3308859, H-1007-A Repair Kit 3/4" Stops with Concealed wheel handle for use with 3/4" H-700 SO1294K wheel handle Series Stops 0388010, H-730-A 1" Concealed wheel handle SO1290S Bak-Chek® Angle Stop, rough brass Kit Description Order No. 39 0388011, H-730-A 3/4" Concealed wheel handle SO1290R A-37-A Repair Kit, 1.5 gallons per flush, for urinal SO1045 Bak-Chek® Angle Stop, rough brass A-38-A Repair Kit, 3.5 gallons per flush, for toilet SO1050 3308872, H-1011-A Repair Kit (for Concealed wheel 39A SO1294N A-41-A Repair Kit, 1.6 gallons per flush, for toilet SO1052 handle only; does not include bonnet) A-42-A Repair Kit, 1.0 gallons per flush, for urinal 0208083, H-623 Bonnet SO1274A SO1053 39B A-43-A Repair Kit, 0.5 gallons per flush, for urinal SO1053A 0308705, H-561 Bonnet SO1261

The Tailpiece is the connection between the Valve Body and the Control Stop. Sloan Adjustable and Ground Joint Tail- pieces are threaded into the Valve Body at the factory. Sloan Tailpieces are available in a variety of lengths to accommodate installation rough -in errors and unique installation requirements. H-551-A Tailpieces and Repair Parts ■ The majority of flush valves supplied by Sloan since 1964 feature the H-551 -A Adjustable Tailpiece. The valve Tailpiece connects to Easily Remove Sloan Tailpieces! the Control Stop with a slid- Sloan Adjustable and Ground Joint Tailpieces are assembled ing O-ring seal. into the Valve Body using a pipe thread. Significant force is ■ The H-551-A Adjustable used to drive the Tailpiece into the Valve Body. As such, re- Tailpiece standard length is 2 moval of the old Tailpiece may be difficult. For replacement, we -1/16". Designed for a stan- recommend using the H-530 Tailpiece Removal Bar. dard flush valve installation Adjustable where the distance between Tailpiece Tailpiece Removal Bar the centerline of the valve and the centerline of the water supply inlet is 4-3/4". Different tailpiece lengths The Adjustable Tailpiece al- available. Order below. lows for a variance of ± 1/2" 1A from this nominal dimension.

Order Item Description ■ Remove the Flushometer cover and interior parts. No. ■ Secure the Tailpiece Removal Bar vertically in a vice. Place the Flushometer Tailpiece over the Bar. The cast lugs 1A Tailpiece Removal Bar SO1232 inside the Tailpiece will catch on the Bar. 1 Coupling Nut only, chrome plated SO1237 ■ Insert a length of 3/4" pipe into the barrel of the Valve Body. 2 Locking Ring only SO1253 ■ Unscrew Tailpiece from Valve Body and assemble the new 3 O-Ring only SO1260 Tailpiece into the Valve Body in the reverse manner. 2-1/16” tailpiece assembly (items 2, 3 & 4) SO1240 ■ Use Teflon tape (or pipe sealant) on Tailpiece pipe threads. ■ Ensure that both the Coupling and the Locking Ring 3-1/16” tailpiece assembly (items 2, 3 & 4) SO1245 4 (Adjustable Tailpiece only) are on the Tailpiece before tighten- 4-1/16” tailpiece assembly (items 2, 3 & 4) SO1246 ing the assembly. ■ Do NOT use sealant on the first few threads of the Tailpiece. 5-1/16” tailpiece assembly (items 2, 3 & 4) SO1247

Repair Kits for Pedal Operated Sloan Flush Valves Valve Style Description Order No. Complete pedal assembly SO1296 Exposed Replacement pedal only SO1296B Pedal repair kit less pedal — internal parts SO1100 Replacement pedal only SO1296A Concealed Screw for pedal (order with above pedal) SO1296C Exposed Concealed Pedal repair kit less pedal — internal parts SO1107

The Common Control Stops! H-720 H-725 H-730 H-735 H-700 H-710

■ Short bumper cap Long bumper cap ■ Concealed ■ Exposed ■ Vandal-resistant ■ Vandal-resistant ■ ■ screwdriver stop screwdriver stop ■ Rough brass ■ chrome plated ■ spinning cap ■ locking cap ■ ■ wheel handle stop ■ wheel handle stop ■ screwdriver stop ■ screwdriver stop H-745 H-740 H-750 H-760 H-770 H-775 H-780

■ For Regal models ■ For Regal models ■ Vandal-Resistant ■ Locking cap ■ Concealed wheel handle ■ Exposed wheel handle ■ For Regal models ■ standard cap ■ Bumper cap ■ straight pattern ■ straight pattern ■ Rough Brass ■ chrome plated ■ Standard cap ■ screwdriver stop ■ screwdriver stop ■ screwdriver stop ■ screwdriver stop ■ Straight Pattern ■ Straight Pattern ■ Straight Pattern

Currently Manufactured Control Stop Repair Kit Control Stops before 1996

Example In 1996 Sloan moved from the old 600 series Control Stops control stop to the current 700 series of stops. and their Repair Kits They share the same repair kit for the 1” stop, but the 600 ¾” has its own unique kit. Order below.

The Control Stops shown here are for the Repair Kits for 600 series Control Stops Order No. Sloan “Royal” models unless shown otherwise above. Please select from either the common Stop repair kit for ¾” 600 series control stop SO1235 adjustable tailpiece style or the ground- Stop repair kit for 1” 600 series control stop SO1250 joint tailpiece style (the ground joint style mates directly to the valve body and does not Control Repair have an O-ring on the tailpiece). Control Stops and Kits Continued Model Stop Kit Description The repair kits for all of the control stops Order No. Order No. shown in the ordering table below resemble 3/4” control stop for adjustable tailpiece SO1290R the sample repair kit image shown to the right. H-730 Rough 1” control stop for adjustable tailpiece SO1290S Brass, SO1294J Control Repair Concealed Control Stops and Kits 3/4” control stop for ground joint SO1290T Model Stop Kit Wheel Description Handle 1” control stop for ground joint SO1290U Order No. Order No. 3/4” control stop for adjustable tailpiece SO1291 3/4” control stop for adjustable tailpiece SO1275 H-700 H-735 1” control stop for adjustable tailpiece SO1293 with 1” control stop for adjustable tailpiece SO1280 Exposed SO1255 Spinning SO1250 Wheel 3/4” control stop for ground joint SO1292 Vandal 3/4” control stop for ground joint SO1285 Handle Resistant 1” control stop for ground joint SO1294 Cap 1” control stop for ground joint SO1290 3/4” control stop for adjustable tailpiece SO1294A 3/4” control stop for adjustable tailpiece SO1290A H-740 H-710 1” control stop for adjustable tailpiece SO1294B with with SO1250 1” control stop for adjustable tailpiece SO1290B standard Locking 3/4” control stop for ground joint SO1294C SO1250 cap Vandal 3/4” control stop for ground joint SO1290C Resistant 1” control stop for ground joint SO1294D Cap 1” control stop for ground joint SO1290D H-745 1” control stop for adjustable tailpiece SO1294E SO1250 H-720 1” control stop for adjustable tailpiece SO1290G H-750 1” control stop for ground joint SO1294P SO1250 with SO1250 Rubber H-760 1” control stop for ground joint SO1294R SO1250 Bumper 1” control stop for ground joint SO1290H H-770 1” control stop for ground joint SO1294S SO1294J H-725 3/4” control stop for adjustable tailpiece SO1290L with SO1250 H-775 1” control stop for ground joint SO1294T SO1255 Rubber Bumper 1” control stop for ground joint SO1290M H-780 1” control stop for ground joint SO1294U SO1250

H-40-A Screwdriver Control Stop, ¾” & 1” H-40-A Wheel Handle Control Stop, ¾” & 1” Also fits H-45-A screwdriver straight pattern control stop Also fits H-45-A wheel handle straight pattern control stop Used from the 1930’s through the 1960’s Used from the 1930’s through the 1960’s

Repair Kit Description Order No. Repair Kit Description Order No. Includes packing ring, key socket, lock shield, retaining Includes packing ring, screw, wheel handle, key stem, SO1220 SO1225 ring, screw assembly and packing glands, screw assembly, washer and packing

H-440-A Screwdriver Control Stop, ¾” H-440-A Wheel Handle Control Stop, ¾” Used from the 1950’s through the 1960’s Used from the 1950’s through the 1960’s

Repair Kit Description Order No. Repair Kit Description Order No. Includes lock shield, packing, key stem, rubber plug, and Includes packing ring, screw, wheel handle, gland, SO1230 SO1231 packing ring washer, packing, wheel handle stem and rubber plug

H-440-A Screwdriver Control Stop, 1” H-440-A Wheel Handle Control Stop, 1” Also fits H-445-A screwdriver straight pattern control stop Also fits H-445-A screwdriver straight pattern control stop Used from the 1950’s through the 1960’s Used from the 1950’s through the 1960’s

Repair Kit Description Order No. Repair Kit Description Order No. Includes lock shield, packing, key stem, rubber plug, and Includes packing ring, screw, wheel handle, gland, SO1005 SO1006 packing ring washer, packing, wheel handle stem and rubber plug

CROWN and NAVAL Flush Valves for Toilets and Urinals CROWN NAVAL Flush Flush Valves Valves

◄ Model ◄ Model 186 180 shown shown

Valves have adjustable Select from 3.5 gallons gallon per flush opera- per flush and 1.6 gpf tion (see below); 1½, models. 1.5” bottom 1¼” or ¾” bottom con- connection to toilet; 1” nection to urinal spud; pipe supply line. 1” pipe supply line.

Select from 3/4”, 1-1/4” and 1-1/2” top spud connections for Select from 3/4”, 1-1/4” and 1-1/2” top spud connections for urinals (3/4” or 1-1/4”) and toilets (1-1/2”). Order valves that urinals (3/4” or 1-1/4”) and toilets (1-1/2”). Valves have adjust- flush 1.6, 1.0 and 0.5 gallon per flush. For harsh water conditions. able gallons per flush operation. For harsh water conditions.

FEATURES FEATURES

Quiet, Exposed, Piston Type, Chrome Plated Urinal Flushometer with the • Gallons per flush adjustable on all valves below: 0.5 gpf to 3.0 gpf following features: • Quiet, Exposed, Adjustable Piston Type, Chrome Plated Urinal Flushometer with the following features: • Fixed Volume Piston with Filtered O-ring Bypass • ADA Compliant Metal Oscillating Non-Hold-Open Handle • ADA Compliant Metal Oscillating Non-Hold-Open Handle with Triple Seal • Self-cleaning Xpelor® Bypass Handle Packing • Vandal Resistant Stop Cap • Locking Vandal Resistant Stop Cap • Adjustable Tailpiece • Adjustable Tailpiece • Vacuum Breaker Flush Connection • High Back Pressure Vacuum Breaker Flush Connection with One-piece • Stamped Wall Flange Bottom Hex Coupling Nut • Ultra High Copper, Low Zinc Brass Castings for Dezincification and • Sweat Solder Adapter with Cover Tube and Cast Set Screw Wall Flange Salt Water Resistance • Handle Packing, Stop Seat and Vacuum Breaker to be Molded from • High Copper, Low Zinc Brass Castings for Dezincification Resistance PERMEX™ Rubber Compound for Chloramine Resistance • Valve designed to accept Low and Ultra-Low Consumption Pistons only to ensure Water Conservation Valve shall be in compliance to the applicable sections of ASSE 1037, ANSI/ • Non-Hold-Open Handle, Fixed Metering Bypass and No External Volume ASME 112.19.6, and Military Specification V-29193. Adjustment to Ensure Water Conservation ———————————————————————————————————— Model 110 factory set to 3.5 gallons per flush; Model 111 factory set to 1.6 • Handle Packing, Main Seat, Stop Seat and Vacuum Breaker to be gallons per flush; Model 186 factory set to 1.0 gallons per flush; Model 180 molded from PERMEX™ Rubber Compound for Chloramine factory set to 1.5 gallons per flush. Gallons per flush adjustable on all valves. Order Order Description Description No. No. Crown model Toilet Flush Valves — For Harsh Water Naval model Toilet Flush Valves — Military Grade Model 110, Adjust from 1.5 to 7.0 gallons per Model 111, 1.6 gallons per flush, 1-1/2” top spud SN1004B SN1005H flush, 1-1/2” top spud connection, 1” water supply connection, 1” water supply Model 111, Adjust from 1.5 to 7.0 gallons per SN1005E Crown model Urinal Flush Valves — For Harsh Water flush, 1-1/2” top spud connection, 1” water supply Naval model Urinal Flush Valves — Go Navy! Model 186, 1.0 gallons per flush, 3/4” top spud SN1010J Model 186, Adjust from .5 to 3.0 gallons per flush, connection, 3/4” water supply SN1010G 3/4” top spud connection, 3/4” water supply Model 180, 1.0 gallons per flush, 1-1/4” top spud Model 180, Adjust from .5 to 3.0 gallons per flush, SN1008F SN1008E connection, 1” water supply 1-1/4” top spud connection, 1” water supply

Sloan NAVAL Ground Joint Tailpiece SO1258 Flush Valve Repair Parts Vandal Resistant stop cap

Adjustable Tailpiece

Repair Parts Ordering Order Item Description No. 1 CN-74-A, Chrome Plated Cover assembly SO1298 2 CN-1007-A, Cap screw repair kit SO1302 Order 3 CN-1008-A, Regulating screw repair kit SO1302A Item Description No. CN-1002-A, Piston assembly for toilet SO1300 19 H-550, Stop coupling SO1237 4 CN-1003-A, Piston assembly for urinal SO1300A 20 NH-551-A, Chrome adjustable tailpiece, 2-1/16” SO1303H CN-1009-A, Piston assembly for shower SO1302B 21 H-553, O-ring SO1260 5 CN-76, Cover gasket SO1298B 22 H-6, Chrome ground joint stop coupling SO1214 6 A-31, Handle gasket SO1030 23 NH-5, Ground joint tailpiece, 1-5/8” SO1303G H-700-A, 1” Chrome screwdriver control stop for 7 B-39, Handle seal SO1095 SO1280 8 B-32-A, Chrome Handle assembly SO1090 adjustable tailpiece (Item 20 above) 9 A-6, Chrome Handle coupling SO1010 24 H-710-A, 1” Chrome screwdriver control stop SO1290B 10 B-7-A, Chrome Socket SO1080 H-710-A, 3/4” Chrome control stop for use with SO1290 11 B-32, Chrome handle grip only SO1085 adjustable tailpiece (Item 20 above) 12 B-50-A, Handle repair kit SO1105 H-700-AG, 1” Chrome screwdriver control stop 25 SO1290 13 C-42-A, Chrome 3” push button assembly SO1297 for use with ground joint tailpiece (See item 23) 14 C-1000-A, 3” push button replacement kit SO1297D 26 Repair Kit, H-541-A, for 1” control stop SO1250 15 C-64-A, 3” push button repair kit SO1297A H-700-AG, 3/4” Chrome screwdriver control 25 stop for use with ground joint tailpiece SO1285 V-500-AA, 3/4” x 9” vacuum breaker SO1360 (Item 23 above) 16 V-500-AA 1-1/4” x 9” vacuum breaker SO1370 Repair Kit, H-543-A, for 3/4” screwdriver 26 SO1256 V-500-AA, 1-1/2” x 9” vacuum breaker SO1375 control stop H-573, Chrome stop cap, 1” SO1270 17 V-551-A, Vacuum breaker repair kit SO1385 28 H-582, Chrome stop cap, 3/4” SO1265 F-5-A, Chrome 3/4” spud coupling SO1195 30 H-574, Chrome stop cap with bumper, 1” SO1262 18 F-5-A, Chrome 1-1/4” spud coupling SO1205 F-5-A, Chrome 1-1/2” spud coupling SO1210 31 H-576, like H-574 with extended bumper, 1” SO1263

Model BPW-1000, Manual Flush BPW Repair Parts Valve

Order repair parts for the Model BPW-8005, Automatic Flush valve on the preceding pages. This exposed bedpan washer and flush valve has all the ad- vantages of the high quality “Royal” model flush valve, along with the Slimline Diverter Valve assembly with solid brass spray arm and counter bal- anced pivot assembly. A 1” pipe size “screw driver” control stop with vandal resistant cap; adjustable tail piece, vacuum breaker flush connection; wall support and flange; spud coupling and spud flange for 1- 1/2” top spud; sweat solder adapter ring for 1” copper tube installation; chrome plated cover tube and chrome plated cast set screw wall flange. Se- lect from manual or automatic flush valve.

Item Description Order No. V-600-AA 1½” x 21½” Vacuum Breaker Assembly SO1380A 1 V-600-AA 1½” x 13½” Vacuum Breaker Assembly SO1378 2 V-651-A, Vacuum breaker repair kit SO1386 3 F-2-A, 1-1/2” slip joint coupling SO1160 4 DV-1, Diverter valve body SO1110D 5 DV-1001-A, Wall support kit SO1111F 6 F-1003, Outlet tube gasket SO1212 7A F-1005, Outlet tube SO1212B 7B F-182, Outlet tube with 1-1/2” offset SO1211 8 F-2, 1-1/2” Coupling nut CG1485 9 F-5-A, 1-1/2” Spud coupling assembly SO1210 DV-32-AA Spray arm replacement kit SO1113 Order 10 DV-1013-A, Bio-Guard spray arm replacement kit SO1113G Description No. DV-1014-A, Short spray arm replacement kit SO1113H 11 DV-1007-A, Spray arm repair kit Model BPW-1000 Manual Flush Bedpan Washers SO1113F 12 DV-1003-A, Pivot replacement kit SO1111H BPW-1000, 3.5 gallon flush for old style toilets SN1017 13 DV-1002-A, Deoseptic pivot replacement kit SO1111G BPW-1005, 1.6 gallon flush for new style toilets SN1018 14 DV-21, Plug button SO1110E BPW-1100, 1.6 gallons per flush SN1019 15 DV-33-A, Swivel & ball check assembly SO1110G Model BPW-8005 Automatic Flush Bedpan Washers 16 DV-36-A, Aspirator tube assembly SO1110H 17 DV-29, Deoseptic solution bottle SO1110F BPW-8005 allows 3.5 gallons per flush SN1019H Bedpan Washer Rebuild Kits BPW-8005-1.6 for low consumption toilets, 1.6 gpf SN1019G Kit DV-50-A, Diverter Rebuild Kit, includes outlet tube gasket (#6), spray arm repair kit (#11), and all items in pivot replacement kit (#12) ex- SO1111 cept pivot

Select the Push-Button Operation Style You Need!

Series 600 ■ Dual Filtered By-Pass Series 900 ■ Dual Filtered By-Pass Diaphragm, Handle Packing, Stop Diaphragm valve for long- Seat and Vacuum Breaker to be lasting durability. molded from PERMEX™ rubber ■ Metal Non-Hold-Open Push compound for Chloramine Resis- Button with a Triple Seal Han- tance dle Packing ■ Metal Non-Hold-Open Push Button ■ 1" I.P.S. Wheel Handle Bak- with a Triple Seal Handle Packing Chek™ Angle Stop ■ 1" I.P.S. Wheel Handle Bak- ■ Adjustable Tailpiece Direct Chek™ Angle Stop Elbow Flush Connection and Push- ■ ■ Adjustable Tailpiece Coupling for connection in the Button Elbow Flush Connection and Cou- Hydraulic pipe chase (flush connection Activated ■ pling for 1-1/2" NPT Back Inlet (for Push- through the wall not provided connection in the pipe chase - flush Button by Sloan) connection through the wall not Activated ■ Sweat Solder Adapter, and provided by Sloan) Exposed parts are Chrome ■ Sweat Solder Adapter Plated ■ SPECIFY WALL THICKNESS ■ Premium vacuum breaker WHEN ORDERING Order the style of hydraulic push-button actuator you need from the following page.

Model 952 Model 601

Center push button to center wall connection dimension

Hydraulic Flush Valves Order Push button actuators not included -- Order from next page. No. Order Exposed Valve, for Toilets Complete Standard Prison Flush Valves No. 910-1.6, 1½” Top spud, 1” supply stop, 1.6 gal per flush SN3100 For Combination Fixtures Behind Wall Concealed Valve, for Toilets Model 601-1.6, Concealed back 1½” inlet, 19” from 940-1.6, 1½” exposed back spud, 1” supply stop, 1.6 gpf SN3105 SN3000 center push button to center wall connection, 1.6 gpf 950-1.6, no flush connection, 1” female pipe union outlet SN3110 Model 603-1.6, Concealed back 1½” inlet, 14½” from 952-1.6, 1½” concealed back spud, 1” supply stop, 1.6 gpf SN3115 SN3005 center push button to center wall connection, 1.6 gpf 953-1.6, 1½” Top spud, 1” supply stop, 1.6 gpf SN3120 For Toilet Fixtures Exposed Valve, for Urinals Model 611-1.6, Concealed back 1½” inlet, 22½” from 980-1.0, 1¼” Top spud, 1” supply stop, 1 gal per flush SN3125 SN3015 center push button to center wall connection, 1.6 gpf 986-1.0, ¾” Top spud, ¾” supply stop, 1 gal per flush SN3130 For Urinal Fixtures Behind Wall Concealed Valve, for Urinals Model 609-1.6, Concealed back 1½” inlet, 13” from 990-1.6, 1¼” concealed back spud, 1” supply stop, 1 gpf SN3135 SN3010 center push button to center wall connection, 1.6 gpf 990-1.6, 1¼” Top spud, 1” supply stop, 1 gal per flush SN3140 Model 613-1.6, Concealed back ¾” inlet, 12” from 995-1.6, ¾” concealed back spud, ¾” supply stop, 1 gpf SN3145 SN3020 center push button to center wall connection, 1.6 gpf 997-1.6, ¾” Top spud, ¾” supply stop, 1 gal per flush SN3150

Hydraulic Push-Button Operation Actuators

Model HY-33-A Fixture Wall Push Button (PB) Assembly for use with Sloan Series HY-33-A 900 Hydraulic Flushometer. Recommended for installation where access behind the wall is available. Also for use with Sloan Easy Access™ Wall Box.

Specifications: • ADA Compliant Non-Hold-Open feature type Actuator • Large diameter, Spring Loaded Button • Wall Clamp and Threaded Rod for through the wall installation (for walls up to 8" (200 mm) thick) - Spacer provided for walls less than 2" (50 mm) thick • Mounting fasteners for installation on Sloan Easy Access Wall Box • Two 36" (914 mm) long flexible tubing for connection to Sloan Series 900 Hydraulic Flushometer

HY-49-A Model HY-49-A Metal Partition Push Button (PB) Assembly for use with Sloan Series 900 Hydraulic Flushometer. Recommended for installation on 1" (25 mm) metal toilet stall partition.

Specifications: • ADA Compliant Non-Hold-Open feature type Actuator • Large diameter, Spring Loaded Button • Mounting fasteners for installation on 1" (25 mm) thick metal toilet stall partition • Two 36" (914 mm) long flexible tubing for connection to Sloan Series 900 Hydraulic Flushometer

HY-100-A Model HY-100-A Metal Button Fixture Wall Push Button (PB) Assembly for use with Sloan Series 900 Hydraulic Flushometer. Recommended for installation on Stainless Steel Prison Fixtures and other locations where extreme vandalism is a concern. Re- quires access behind the wall for installation and servicing.

Specifications: • ADA Compliant Non-Hold-Open feature type Actuator • Spring Loaded, Metal Button • Wall Clamp and Threaded Rod for through the wall installation (for walls up to 8" (200 mm) thick) - Spacer provided for walls less than 2" (50 mm) thick • Two 36" (914 mm) long flexible tubing for connection to Sloan Series 900 Hydraulic Flushometer

Model HY-108-A Metal Button Panel Mount Push Button (PB) Assembly for use HY-108-A with Sloan Series 900 Hydraulic Flushometer. Recommended for installation on Handicap and similar Stainless Steel Prison Fixtures where a front access panel is provided. Also for use with Sloan Easy Access™ Wall Box when used in locations where extreme vandalism is a concern. Requires access for installation and servicing.

Specifications: • ADA Compliant Non-Hold-Open feature type Actuator • Spring Loaded, Metal Button • Two 36" (914 mm) long flexible tubing for connection to Sloan Series 900 Hydraulic Flushometer. Order Model No. Actuator Description No. HY-33-A Fixture wall push-button assembly SN4000 HY-49-A Metal partition push button assembly SN4005 Ordering Guide ► HY-100-A Metal button, fixture wall PB assembly SN4015 HY-108-A Metal button, panel mount PB assembly SN4020

Individual Valve Repair Parts

Relief Disc Valve

Diaphragm

Guide Assembly includes refill head and flow ring Order Description No. Relief valve for standard toilet. A-19-AC SO1020 Relief valve for standard urinal. A-19-AU SO1025 Relief valve for low-consumption valves with “LC” SO1026 stamped on cover. A-19-ALCM Disc on top of diaphragm. A-15-A SO1015 Diaphragm only, Single-Filtered, A-156-A SO1065 Diaphragm Kit, includes diaphragm, disc, handle SO1070 seal and handle gasket. A-156-AA Guide Assembly SO1075 Valve Kits include all the appropriate parts shown See above pre-assembled for easy installation Below Repair Parts and Kits Ordering Order Item Description No. 1 A-72, Outside cover SO1060 2 A-71, Inside cover SO1055 A-1041-A, Valve Kit for toilets, 1.6 gpf SO1076B A-1038-A, valve kit for toilets, 3.5 gpf SO1076A 3 A-1043-A, valve kit for urinals, 0.5 gpf SO1076D A-1042-A, valve kit for urinals, 1.0 gpf SO1076C Order Item Description A-1037-A, valve kit for urinals, 1.5 gpf SO1076 No. 4 V-651-A, vacuum breaker repair kit SO1386 14 F-21, brass elbow SO1210J 5 H-550, brass tailpiece coupling SO1237 15 F-2A, parts as indicated (1-1/2” size) SO1160 6 H-551-A, brass adjustable tailpiece, 2-1/16” SO1240 16 F-100, brass flared end -- specify length 7A H-553, O-Ring SO1260 17 F-15-A, as indicated for 3/4” pipe -- specify length 7B H-552, Locking ring SO1253 18 F-2-A, parts as indicated (3/4” size) SO1145 8 H-730-A, Wheel handle control stop SO1293 19 HY-25, valve actuator housing only SO3010 9A H-541-A, 1” pipe size repair kit for H-730-A SO1294J 20 HY-24, tube fitting (2 each required) SO3005 9B H-543-A, 3/4” repair kit for H-730-A SO1294K 21 HY-35, tube fitting nut (2 each required) SO3025 10 H-558-A, wheel handle only SO1260X 22 HY-30, 1/4” x 48” tubes (2 ea. required) HY-30 11A H-623, 1” pipe size brass bonnet SO1261 23 A-6, actuator housing coupling nut only SO1010 11B H-623, 3/4” pipe size brass bonnet SO1274 24 DO-22, O-Ring SO1110B 12 Vacuum breakers (specify size & length) 25 HY-109-A, Actuator Housing Assembly SO3040 13 F-2-AA, includes all parts indicated SO1161 26 HY-83-A, Actuator cartridge assembly SO3030

HY-33-A Parts

HY-49-A Parts HY-100-A Parts

HY-108-A Parts *Replacement Push-Button Cartridge

HY-32-A Cartridge

Part Order Part Order Parts Description Parts Description No. No. No. No. HY-33-A Repair Parts HY-100-A Repair Parts 1 HY-33-A Fixture Wall Push Button Assembly SN4000 1 HY-100-A Fixture Wall Metal Button Assembly SN4015 2 HY-1000-A Push Button Kit SO3050 2 HY-111-A Metal Button Kit SO3045 3 HY-3 Spring SO3000 EL-109 Spring 4 HY-1001-A Mounting Flange Kit SO3055 3 N/A * HY-32-A Push button cartridge only SO3020 * HY-32-A Push button cartridge only SO3020 6 HY-35 Tube Fitting Nut (2 required) SO3025 5 HY-35 Tube Fitting Nut (2 required) SO3025 7 HY-29 Threaded Rod SO3015 6 HY-29 Threaded Rod SO3015 8 HY-105 Spacer SO3035 7 HY-105 Spacer SO3035 9 HY-1002-A Mounting Strap Kit SO3060 8 HY-1002-A Mounting Strap Kit SO3060 HY-49-A Repair Parts HY-108-A Repair Parts HY-1000-A Push Button Kit - includes Push 1 SO3050 Button, Flange, Spring & Set Screw 1 HY-91 Flange N/A 2 HY-3 Spring SO3000 2 HY-94 Mounting Washer N/A HY-1003-A Mounting Flange Kit - includes 3 HY-93 Mounting Nut N/A 3 Mounting Flange, Mounting Nut, SO3065 Screws (2) & Tinnerman Nuts (2) 4 HY-86-A Push Button Assembly N/A * HY-32-A Push button cartridge only SO3020 5 EL-109 Spring N/A HY-71-A Actuator Assembly HY-32-A Push button cartridge only SO3020 4 N/A * (includes HY-32-A cartridge assembly) Complete actuator assembly not available. 6 SN4020 5 HY-46 Mounting Flange N/A Order complete HY-108-A Copyright 1987-2010 State Supply G - 53 Toll Free: 800.772.2099 ■ Local Phone: 651.774.5985 ■ Fax: 651.774.7156 Section G Sloan Waterless Urinals

Save on Water, Sewage and Maintenance Costs!

■ Sloan’s Water free Urinals reflect today’s water conservation ef- forts. They perform like a conventional urinal except... there is no water usage. The water-free white-colored urinal installs easily to a 2" drain line, eliminates water and sewage costs and can reduce maintenance expenses.

■ Sloan Water free Urinals can help reduce maintenance costs and workloads. Harsh chemical cleaners become unnecessary. Cleaning of the Water free Urinal is the same as standard urinals. Any mildly-acidic disinfec- tant cleaner can be used. No rim holes or mineral deposits to worry about, just a smooth dry surface. Conventional urinals with wet surfaces can become a breeding ground for bacterial growth and odors.

■ Since no water is used, the chemical reaction between urine and water, which typically causes odors, is eliminated. Studies have shown Sloan water-free white-colored urinals are odor-free and have lower levels of ammonia than flush urinals.

■ Sloan’s Water free Urinals provide the convenience and comfort of touch-free operation promoting hygiene and cleanliness.

■ An easily replaceable and disposable patented cartridge installs in seconds. The recyclable cartridge can be disposed of in a landfill in accor- dance with local biodegradable regulations.

Quick return-on-investment: The Waterless Drain Cartridge is Reduce water, sewage & maintenance costs $150 to $300 per year and pay for Permanently Sealed with Liquid Sealant your new urinals in less than two years.

FEATURES • Touch-free operation • No water usage — Save 40,000 gallons of water per year (based on average usage) and the associated sewage fees. • Vitreous china with Mechanical-free design • Patented, sealed locking cartridge eliminates need to add blue seal-like liquid. • Smooth, non-porous surfaces • ADA compliant and Full size urinals • Drains to a standard drain line • No odor • Start-up cartridge included • Easy installation

BENEFITS • Odor-free, vandal resistant • Minimal care and cleaning • Eliminates installation of water supply lines • Reduces airborne bacteria The Drain Cartridge is the main component and is installed at the base of the urinal. A biodegradable sealant liquid is contained within the cartridge. A barrier is formed between the drain and the See Product Specifications open air by the liquid sealant, eliminating odors. The cartridge is designed to collect uric sediment. The remaining liquid, which is non- and Ordering Guide on corrosive and free of hard water, is allowed to flow into the drainage the following page. pipe. The result: No wasted water and an odor-free environment. Maintenance is performed by replacing the cartridge after 7,000 uses with a provided key. It’s that simple!

Product Specifications and Ordering Guide

WES-1000 Specifications: for WES-1000 Wall hung, wall outlet, waterless, Vitreous China Urinal with the following features: • Vitreous China Fixture • Cartridge Housing (H-1, Mod. 3) • Cartridge Kit — Engineered to last for an average of 7000 uses • One piece Wall Bracket with Anchors Included • Uni-coupler (for new and retrofit installations) • Drain Line Test Cap Additional Cartridges sold separately on next page. Colors: Standard White. Other colors available.

Cartridge Housing

Sloan Waterless Urinals reduce water and sewer costs, maintenance and repair bills, and create more hygienic, odor-free restrooms. A Patented, Sealed Cartridge eliminates the need for water, typically conserving 40,000 gallons per unit Model WES-1000 per year. In addition, Sloan Waterless Urinals Order Description do not require costly No. supply piping to fixture. WES-1000 SN2000

WES-4000 Specifications for WES-4000 Wall hung, wall outlet, waterless, Vitreous China Urinal with the following features: • Vitreous China Fixture • Cartridge Housing (H-1, Mod. 3) • Cartridge Kit † — Engineered to last for an average of 7000 uses • One piece Wall Bracket with Anchors Included • Uni-coupler (for new and retrofit installations) • Drain Line Test Cap Additional Cartridges sold separately on next page. Colors: Standard White. Other colors available.

Cartridge Housing

The patented Cartridge is engineered to last for an average of 7000 uses and to receive waste through drain holes. Waste passes through an immiscible layer of biodegradable Sealant, continues through a Trap Sys- tem, and flows over a Baffle to prevent the loss Model WES-4000 of Sealant. A Discharge Tube in the housing di- Order Description rects the flow of waste No. into the building drain system. WES-4000 SN2001

LIFETIME Urinal Cartridge — Never Replace Urinal Cartridges Again!

WHAT IS IT? The LifeTime Cartridge provides a solution to all of the problems associated with waterless urinals that have replaceable cartridges. If you are like most owners of waterless urinals, you are probably frustrated by having to spend all that money and spend all that time replacing cartridges and sealant several times per year. Here’s the answer to that problem . . .

■ Install the LifeTime Cartridge and you never have to buy cartridges or sealant ever again! ■ Remove the original replaceable cartridge, insert the LifeTime Cartridge and you are done. ■ The LifeTime Cartridge can easily be removed if needed for maintenance. ■ Over a few years you will save hundreds of dollars — Think about it! ■ Fits into Falcon and Sloan Waterless Urinals

No need to use sealants! The cartridge has a special elastomeric check valve attached. The check valve is manufactured from space age, rubber-like synthetic polymer, used as leg urinals for Astronauts. It is treated to roll up when liquid is not passing through it, but flexible enough to open and permit liquid flow, from an intermittent drip to high rate flows. When the check valve is closed or liquid is flowing through the check valve, it successfully resists any emission of sewer gas and any backup of sewage from the waste line.

“What if my urinal drain gets clogged?”

Use the Cartridge Removal Tool! Clean the drain and put back the cartridge.

THE DETAILS:

The LifeTime Cartridge comes with a lifetime warranty. Should any defect or malfunction in the material occur within the lifetime of the urinal into which it was originally installed, the LifeTime Cartridge will be replaced by the manufacturer without charge. The LifeTime Car- tridge is not affiliated or associated with Falcon or Sloan, and the cartridge is not endorsed by Falcon or Sloan as suitable for use in water-free urinals sold by Falcon or Sloan. Order Not included Lifetime Urinal Cartridge and Tool with cartridge No. Cartridge LIFETIME Waterless Urinal Cartridge — Never replace! Never use sealant! EA1100 Removal Tool Tool to remove cartridge when urinal maintenance is needed. EA1120

Sloan Replacement Cartridge and Sealant Kit

SLOAN REPLACEMENT CARTRIDGE

The cartridge is the main operational component of any Sloan waterless urinal. Installed at the base of the urinal, it contains a biodegradable sealant liquid within the cartridge. A barrier is formed between the drain and the open air by the liquid sealant to prevent odors from escaping into the restroom. The filtering cartridge collects the uric sediment. The remaining non-corrosive liquid flows into the drainage pipe. The result: No wasted water from “flushing” and an odor-free environment. The cartridge is replaced simply with a provided key after 7000 uses.

Water Savings: Multiplying each use by 1.6 gallons of water (to compare to low-flow toilets) or by 3.5 (to compare to older units) shows a savings of 9,600 to 24,500 gallons of water. Kit includes cartridge, Cartridge Operation: The Cartridge is engineered to receive waste through drain holes. Waste sealant and cartridge passes through an immiscible layer of Sealant, continues through a Siphon Trap System, and flows removal key. out through a Patented Baffle to prevent the loss of Sealant. A Discharge Tube in the housing di- rects the flow of waste into the building drain system. Order Kit Contents: Sloan Replacement Cartridge Kit No. • Cartridge Kit — Engineered to last for at least 7000 uses Cartridge Kit: Includes cartridge, cartridge tool, • Cartridge is made from recyclable ABS SO1400 • Sealant Liquid — 100% biodegradable sealant, protective glove and disposal bag • Cartridge Installation/Removal Tool Sealant liquid only SO1401 • Protective Glove • Disposal Bag

AC-11 Shower Head Automatic Sensing Hand Dryers

FEATURES: ■ Self-cleaning chrome plated Model EHD 400 Infrared Shower Head with Volume Control and Optical Sensor with ninety (90) universal Ball Joint. Pressure compensat- second lockout feature. ■ • Air delivery of approximately ing to 2.5 gpm maximum Flow Control. ■ 180 CFM at an outlet tempera- All Brass Construction. ■ ½'' I.P.S. Inlet. ture of 145°F at a 72°F ambient room temperature. 120V: 20 amps, 2400 watts; 230V: 10 AC-51 Shower Head amps, 2400 watts • Heating element with auto- FEATURES: ■ Self-cleaning chrome plated matic resetting thermostat. Shower Head without Volume Control. ■ Choose 120 or 208-230-277V. Order Universal Ball Joint. ■ Pressure compensat- • Vandal-resistant metal protec- Description tive grill and one-piece heavy- No. ing 2.5 gpm maximum Flow Control. ■ All duty die cast zinc alloy housing. Model EHD-401, 120V SN1003L Brass Construction. ■ ½'' I.P.S. Inlet. • Bright chrome plated finish. Model EHD-402, 230V SN1003M AC-450 Shower Head

FEATURES: • Institutional design with Ad- justable Spray Angle • Pressure Compensat- ing 2.5 gpm flow control • Brass Construc- tion, outside Chrome Plating.

Sloan Shower Head Order Guide Order No. AC-11, ball-joint shower head with Flow Control SN1015 AC-51, ball-joint shower head less Flow Control SN1015A AC-450, one-piece institutional shower head SN1016 Choose from Model EHD-S Electronic Sensor 3 different FAST Hand Dryers Operated Hand Dryer for surface voltages mounting: Ultra-fast Drying XLerator® • Self-adaptive Fiber Optic Sensor Hand Dryers completely dry • Automatic 60 second Cut-off LEED Green hands in 10-15 seconds. Water Switch Certified droplets are first blown from • One-piece rugged white-colored Energy Saver hands with a strong controlled air housing with applied scratch- blast. Residual moisture is then resistant finish evaporated with a warm stream • Air delivery of approximately 100 of air up to 135° F. SCFM at an average outlet temperature of 125° F (maximum) DIMENSIONS (inches) Infrared Optical Order Sensor with 35 second Description lockout feature. Air veloc- No. ity of 16,000 LFM (linear Model EHD-S 120V: 2400 watts on 20 amp draw SN1001 feet per minute) at an outlet temperature of 12¾ Model EHD-S 208V: 2400 watts on 10 amp draw SN1002 135°F. Decibel Rating of Model EHD-S 240V: 2400 watts on 8 amp draw SN1003 78-80 dB. Bright chrome plate or chip-proof white 5 ⅜” 13 ¾” epoxy finish. 6¾ 11¾ Description Order No. EHD-501, Chrome, 110/120V, 12.5 amps, 1500 watts SN1001J EHD-501, White, 110/120V, 12.5 amps, 1500 watts SN1001K 13 ⅜” EHD-502, Chrome, 220/240V, 6.5 amps, 1560 watts SN1003J EHD-502, White, 220/240V, 6.5 amps, 1560 watts SN1003K EHD-503, Chrome, 208V, 7.0 amps, 1456 watts SN1002J EHD-503, White, 208V, 7.0 amps, 1456 watts SN1002K

SF-2100 Series 6 VDC Plug-in Transformer Powered with Battery Backup for AC electrical connections Great New SF-2150 Series Battery Powered -- Last up to 2 years! Look for

Specifications: Public ADA Compliant, Sensor Activated, 6 VDC, Chrome Plated Brass, Restrooms! Pedestal Hand Washing Faucet with 0.5 gpm aerator and the following features: Competitively ■ Splash-proof Circuit Control Module Priced! BIG ■ Infrared sensor -- Range, 4” to 7” Seller! ■ 36” Long sensor cable ■ 24” Long flex hose (unless otherwise shown) 0.5 GPM ■ Optional 20” or 30” long braided steel flex hose ■ Filtered Solenoid Valve with serviceable strainer filter ■ 6 VDC Plug-in Transformer (Model SF-2100 only) Order Description ■ Aerator Spray Head ■ Includes Four AA-size Batteries No. ■ Includes appropriate Mounting Hardware SF2100-4 with 4” trim plate, less 24” flex hose, SN1500 ■ Trim Plate Kit for 4” Centerset Sink for pre-tempered water, AC powered Variations (add suffix to Model Number for inclusion with Faucet) SF2100-4-CT with 4” trim plate, 24” flex hose, SN1502 ■ Temperature Mixing Valves (if water not pre-tempered, Bak-Check Tee, AC powered select one of the choices below) SF2100-4-BDM with 4” trim plate, 24” flex SN1501 MIX-60-A Below Deck Mechanical Mixing Valve hose, Below Deck Mixing Valve, AC powered ETF-617-A Bak-Chek® Tee Fitting for Hot/Cold Mix SF2150-4 with 4” trim plate, less 24” flex hose, SN1520 MIX-135-A Below Deck Thermostatic Mixing Valve for pre-tempered water, Battery Powered (operates one faucet) SF2150-4-CT with 4” trim plate, 24” flex hose, SN1522 Bak-Check Tee, Battery Powered SF2150-4-BDM with 4” trim plate, 24” flex SN1521 hose, Below Deck Mixing Valve, Battery Power Pre-Tempered MIX-60-A, Below Deck Mechanical mix valve SN1153 Water Application ETF-617-A, Back-Chek tee fitting SO1131H MIX-135-A, Below Deck Thermostatic mix valve SN1154 20” flex hose, stainless steel braided FQ1025 30” flex hose, stainless steel braided FQ1030

Hot and Cold Water Supply Applications If your water is not pre-tempered choose, from the MIX-60-A mechanical mixing valve or the ETF-617-A Bak- Check Tee or the optional MIX-135-A Thermostatic valve.

MIX-60-A Mixing Valve 20” or 30” FLEX HOSE OPTIONAL

MIX-135-A Thermostatic ETF-617-A Mix Valve Optional

SF-2200 Series 6 VDC Plug-in Transformer Powered with Battery Backup (in case of power outage) for AC electrical connections

SF-2250 Series Battery Powered -- Batteries can last up to 2 years!

Specifications: ADA Compliant, Sensor Activated, 6 VDC, Chrome Plated Brass, Gooseneck Hand Washing Faucet with 2.2 gpm aerator and the following features:

■ Splash-proof Circuit Control Module ■ Affordably priced! Gooseneck ■ Infrared Sensor -- Range: 4” to 7” ■ 36” Long Sensor Cable Design with ■ 24” Long Flex Hose (unless otherwise shown) Filtered Solenoid Valve with serviceable Strainer Filter 2.2 gpm ■ ■ 6 VDC Plug-in Transformer (Model SF-2200 only) aerator ■ Trim Plate Kit for 4” Centerset Sink Variations ■ Aerator Spray Head ■ Includes Four AA-size Batteries ■ Includes appropriate Mounting Hardware

■ Temperature Mixing Valves (if water not pre-tempered, select one below) MIX-60-A Below Deck Mechanical Mixing Valve ETF-617-A Bak-Chek® Tee Fitting for Hot/Cold Mix MIX-135-A Below Deck Thermostatic Mixing Valve (operates one faucet) Order Description No. SF2200-4 with 4” trim plate, less 24” flex hose, for pre-tempered water, AC powered SN1540 SF2200-4-CT with 4” trim plate, 24” flex hose, Affordable Pricing! SN1542 Bak-Check Tee, AC powered SF2200-4-BDM with 4” trim plate, 24” flex hose, Below Deck Mixing Valve, AC powered SN1541 SF2250-4 with 4” trim plate, less 24” flex hose, for pre-tempered water, Battery Powered SN1560 SF2250-4-CT with 4” trim plate, 24” flex hose, Bak-Check Tee, Battery Powered SN1562 Pre-Tempered SF2250-4-BDM with 4” trim plate, 24” flex hose, Below Deck Mixing Valve, Battery Powered SN1561 Water Application MIX-60-A, Below Deck Mechanical mix valve SN1153 ETF-617-A, Back-Chek tee fitting SO1131H MIX-135-A, Below Deck Thermostatic mix valve SN1154 20” flex hose, stainless steel braided FQ1025 30” flex hose, stainless steel braided FQ1030 Hot and Cold Water Supply Applications If your water is not pre-tempered, choose from the MIX-60-A mechanical mixing valve or the ETF-617-A Bak-Check Tee or the optional MIX-135-A Thermostatic valve.

MIX-60-A Mixing Valve

MIX-135-A Thermostatic Mix Valve Optional

20” or 30” FLEX ETF-617-A HOSE OPTIONAL

SF-2300 Series 6 VDC Plug-in Transformer Powered with Battery Backup for AC electrical connections Economically SF-2350 Series Battery Powered. Priced!

Four AA batteries perform up to 2 years. 1 year Limited Securely fits Specifications: Warranty ADA Compliant, Sensor Activated, 6 VDC, Chrome Plated Brass, into 4” Hand Washing Faucet with 0.5 gpm aerator and the following Centerset features: openings!

■ Splash-proof Circuit Control Module ■ Infrared Sensor -- Range: 4” to 7” ■ For 4” Centerset faucets ■ 36” Long Sensor Cable ■ 24” Long Flex Hose -- Order separately! Order ■ Filtered Solenoid Valve with serviceable Strainer Filter Faucets — Order flex hose separately! No. ■ 6 VDC Plug-in Transformer (SF-2300 models only) SF2300, less 24” flex hose, SN1580 ■ Aerator Spray Head for pre-tempered water, AC powered ■ Includes Four (4) AA-size Batteries SF2300-CT, less 24” flex hose, SN1582 ■ Includes appropriate Mounting Hardware Bak-Check Tee, AC powered

SF2300-BDM, less 24” flex hose, Optional Accessories: SN1581 Below Deck Mixing Valve, AC powered ■ Temperature Mixing Valves (if water not pre-tempered) SF2350, less 24” flex hose, ● MIX-60-A Below Deck Mechanical Mixing Valve SN1590 ● ETF-617-A Bak-Chek® Tee Fitting for Hot/Cold Mix for pre-tempered water, Battery Powered SF2350-CT, less 24” flex hose, ● MIX-135-A Below Deck Thermostatic Mixing Valve SN1592 (operates one faucet) Bak-Check Tee, Battery Powered SF2350-BDM, less 24” flex hose, SN1591 Below Deck Mixing Valve, Battery Powered See the Sloan specification sheets MIX-60-A, Below deck mechanical mix valve SN1153 and repair part guides at ETF-617-A, Bak-Check tee fitting SO1131H

www.StateSupply.com/SloanValve MIX-135-A, Below deck Thermostatic mix valve SN1154 20” flex hose, stainless steel braided FQ1025 30” flex hose, stainless steel braided FQ1030 Pre-Tempered Water Application Hot and Cold Water Optional Supply Applications If your water is not pre-tempered, choose from the MIX-60-A mechanical mixing valve or the ETF-617-A Bak-Check Tee or the optional MIX-135-A Thermostatic valve

MIX-135-A MIX-60-A Thermostatic Mixing Valve Mix Valve

(20” or 30” FLEX HOSE OPTIONAL)

ETF-617-A

ETF-600 Series 6 VDC Plug-in Transformer with Battery Backup for AC electrical connections Premium Quality

EBF-650 Series Battery Powered. Infrared Four AA batteries perform up to 2 years. Lavatory Faucet Specifications: Securely fits ADA Compliant, Sensor Activated, 0.5 gpm water flow. 3 year Limited into 4” Warranty Chrome plated cast brass, 4” center x center with the Centerset following features: openings! ■ Splash-proof Circuit Control Module ■ Infrared Sensor with sensor range adjustment screw ■ Low battery indicator light Order ■ Variable time-out settings Series 600 Faucets No. ■ For 4” Centerset faucet hole openings AC Electrical 600 Faucets, Plug-In Transformer ■ Select 8” CP trim plate for 8” Centerset faucet holes ■ Bak-Check Tee for Hot/Cold supply ETF600-P, 4” trim plate with Bak-Check Tee SN1095 ■ Metal Jacketed Wire Protection for Sensor lead ETF600-8-P, 8” trim plate with Bak-Check Tee SN1095L ■ Filtered Solenoid Valve with serviceable Strainer Filter ETF600-P-BDM, 4” trim plate with Below Deck mix valve SN1095G ■ 6 VDC Plug-in Transformer (Model SF-2300 only) ETF600-8-P-BDM, 8” trim plate with Below Deck mix valve SN1095M ■ Vandal resistant, pressure compensating Aerator ETF600-P-BDT, 4” trim plate with Below Deck Therm. valve SN1095H ■ Includes Four (4) AA-size Batteries ETF600-8-P-BDT, 8” trim plate with Below Deck Therm. valve SN1095N ■ Includes appropriate Mounting Hardware Battery Powered 650 Faucets

Optional Accessories: EBF650, 4” trim plate with Bak-Check Tee SN1079 ■ Temperature Mixing Valves (if water not EBF650-8, 8” trim plate with Bak-Check Tee SN1080 pre-tempered) EBF650-BDM, 4” trim plate with Below Deck SN1080J ● BDM Below Deck Mechanical Mixing Valve EBF650-8-BDM, 8” trim plate with Below Deck mix valve SN1080L ● BDT Below Deck Thermostatic Mixing Valve EBF650-BDT, 4” trim plate with Below Deck Therm. valve SN1080R ■ Box mount hardwire transformer (in place of plug-in) also available for AC electrical faucets -- CALL! EBF650-8-BDT, 8” trim plate with Below Deck Therm. valve SN1080T MIX-60-A, BDM below deck mixing valve only SN1153 MIX-135-A, BDT below deck thermostatic valve only SN1154

ETF-600 Faucet with Bak-Chek Tee for Hot and Cold Water Supply

ETF-600 Faucet with BDM and BDT Variation Mixing Valves for Hot and Cold Water Supply

MIX-135-A BDM Thermostatic Mix Valve

Bak-Check Tee

ETF-80 Series 6 VDC Plug-in Transformer with “Battery Backup” for AC electrical connections Long Lasting EBF-85 Series Battery Powered. Performance! Four AA batteries perform up to 2 years.

Specifications: High Quality Battery or AC electrical Power, Sensor Operated Elec- Infrared tronic Hand Washing Faucet for tempered or hot/cold Lavatory water operation. Flow Rate 0.5 gpm Vandal Resistant Faucet Spray Head. Chrome Plated Brass Hand Washing Fau- cet with the following features: ■ Splash-proof Circuit Control Module ■ Fiber Optic, Automatic, Self-adaptive Sensing Order Series 80 Faucets ■ Audible Tone Low Battery Indicator No. ■ Serviceable Filtered Solenoid Valve AC Electrical ETF-80 Faucets, Plug-In Transformer Bak-Chek Tee for Hot/Cold Supply ■ ETF80-4P, 4” trim plate with Bak-Check Tee SN1085 ■ Trim Plate with Anti-Rotation Pin (select 4” or 8”) ETF80-8P, 8” trim plate with Bak-Check Tee SN1085L ■ Vandal Resistant Spray Head with Pressure Compen- sating Flow Control ETF80-4P-BDM, 4” trim plate with Below Deck mix valve SN1085F ■ Polypropylene Optic Cable Protection ETF80-8P-BDM, 8” trim plate with Below Deck mix valve SN1085M ■ Includes four (4) C-cell Alkaline Batteries ETF80-4P-BDT, 4” trim plate with Below Deck Therm. valve SN1085G

Accessories: ETF80-8P-BDT, 8” trim plate with Below Deck Therm. valve SN1085N ■ Plug-in Adapter R Plug-in Adapter Battery Powered EBF-85 Faucets (includes 6 volt transformer for hard wire installation) EBF85-4, 4” trim plate with Bak-Check Tee SN1077 ■ Temperature Mixing Valves EBF85-8, 8” trim plate with Bak-Check Tee SN1077J (for water that is not pre-tempered) EBF85-4-BDM, 4” trim plate with Below Deck mix valve SN1077D ADM Above Deck Mechanical Mixing Valve -- CALL! EBF85-8-BDM, 8” trim plate with Below Deck mix valve SN1077M BDM Below Deck Mechanical Mixing Valve BDT Below Deck Thermostatic Mixing Valve EBF85-4-BDT, 4” trim plate with Below Deck Therm. valve SN1077E ■ Box mount hard-wire transformer (in place of plug-in) EBF85-8-BDT, 8” trim plate with Below Deck Therm. valve SN1077N also available for AC electrical faucets -- CALL! MIX-60-A, BDM below deck mixing valve only SN1153 MIX-135-A, BDT below deck thermostatic valve only SN1154

MIX-135-A Thermostatic Mix Valve

Flushmate 200 Flushmate 500 Flushmate 501

Got a vacuum induced Toilet Tank?

Over the years several different series of brand name toilet tanks were made — Many with different repair parts.

Carefully look at the product im- ages here and on the next page. Determine which model is yours and order the appropriate replacement components from the ordering tables. Flushmate 501-A Flushmate 501-B

Replacement Components for the Flushmate Series 200, 500, 501, 501-A and 501-B Part No. Parts Description Order No. Complete Internal Replacement Tank Assembly (*indicate brand name of toilet when ordering) *Complete internal replacement for toilet with china (porcelain M-101526-F SO5805 -like) tank coupled to china bowl Complete internal replacement for toilet with a plastic tank MA-101525-F SO5800 coupled to china bowl *Complete internal replacement for a one-piece toilet (tank M-102540-F SO5850 M-101526-F MA-101525-F and bowl are one integral unit) Replacement Cartridges Flush cartridge used on all the Flushmate series 500. For all 500 For 200 series C-100500-K SO5320 series Flushmate Not used on the series 200 Flushmate ONLY C-100500-K C-100101-K C-100101-K Flush cartridge used on the Flushmate series 200 only. SO5300

Lower Supply

Used only on the Lower supply used only on the 501-A and 501-B series of 501-A and 501-B BL-100504-K Flushmate tanks. On all other series you must order the com- SO5100 Flushmate Tanks BL-100504-K plete supply group, RK-100100 Upper Supply Upper supply used only on the 501, 501-A and 501-B series of BU-100505-K Flushmate tanks. On all other series you must order the com- SO5210 plete supply group, RK-100100 BU-100505-K BU-100503-K BU-100503-K Upper supply used on M-102540-F tank only SO5200 Combination Upper & Lower Supply Kit

RK-100100 Upper & lower supplies for all — 200, 500, 501, 501-A, 501-B SO5900

Push Button Assembly DP-500999-1 Push button, convex shaped with chrome finish SO5400

DP-510999-1 Push button, concave shaped with chrome finish SO5420

Flushmate 503 Flushmate 504

Replacement Components for the Flushmate Series 503 and 504 Part No. Parts Description Order No. Complete Internal Replacement Tank Assembly (*indicate brand name of toilet when ordering) Complete Flushmate internal tank replacement for close- M-101525-F3 SO5810 coupled toilet (tank bolted to bowl). 503 series Complete Flushmate internal tank replacement for close- M-101526-F4 SO5815 coupled toilet (tank bolted to bowl). 504 series

Complete Flushmate tank replacement for PF/2 in Eljer tank M-101526-F3EK SO5825 141-7000 and 141-7001 Complete Flushmate tank replacement for PF/2 in Crane tank M-101526-F3CK SO5820 3612

Complete Flushmate tank assembly for 1-piece toilet M-102540-F3 SO5855 503 series

Complete Flushmate tank assembly for 1-piece toilet M-102540-F4 S05860 504 series

Replacement Cartridge

Flush cartridge used on all the Flushmate series 503 and 504. C-100500-K SO5320 Not used on the series 200.

Upper Supply

BU-100505-K Upper Supply used on the Flushmate series 503 and 504. SO5210

Lower Supply

BL-100504-3-K Lower Supply used on the Flushmate series 503 and 504. SO5105

Wrenches for Repair

ST-100100 ST-100100 Pictured. Multi-function wrench for repair and maintenance SO5950

Not pictured. New cartridge wrench for easy removal and ST-100500 SO5960 replacement of the C-100500-K cartridge