REICHHOLD Coating Resins Catalog Table of Contents

Alkyds Water-borne (Latex) 2 - 3 Alkyds Water Reducible 4 - 7 Alkyds Solvent-borne 8 - 19 Oils 20 - 25 Polyesters 26 - 27 Solvent-borne Urethanes 28 - 29 Moisture Cure Urethanes 30 - 31 Water-borne Urethanes 32 - 35 Polyols for 2K Urethanes 36 - 37 Epoxy Resins 38 - 41 Epoxy Curing Agents 42 - 45 2K Non-Isocyanate Resin Systems 46 - 47 Powder Resins 48 - 51 Acrylics 52 - 55 Graphic Arts Resins 56 - 61 Alkyds Water-borne (Latex)

Product Product % Solids Solvent Density viscosity Acid value oil type comments Code (Lbs/GAl) (cps) (solids)

Long Oil

Beckosol AQ® 101 91825 55 W 8.8 500 9 - 11 Soya Exterior and interior wood stains

Wood wiping stain vehicle with improved Beckosol ® 102 91879 50 W 8.5 100 6 - 10 Propiertary AQ open time

medium Oil

General purpose for gloss, Beckosol ® 201 91806 55 W 8.8 600 9 - 11 Soya AQ semi-gloss, wood stains

Fast cure; primers, Beckosol ® 205 91827 55 W 8.8 800 9 - 11 Soya AQ semi-gloss and flats

Fast cure; very high gloss for trim; Beckosol ® 206 91854 55 W 8.9 800 9 - 11 Oxidizing AQ suitable for lower gloss systems MODIFIED Acrylic modified; highest solids; Beckosol AQ® 510 91972 61 W 8.8 1000 4 - 6 Soya primers, asphalt and concrete sealers, architectural paints

Epoxy modified; wet look sealer for Beckosol ® 520 91888 51 W/G2 8.7 230 6 - 10 Proprietary AQ concrete and masonry products

CHAIN-STOPPED

Beckosol AQ® 210 91855 55 W 8.9 500 7 - 9 Soya Metal primers

2 3 Alkyds Water Reducible

Product Hydroxyl Product % Solids Solvent Density viscosity oil type Acid value comments (Lbs/GAl) (G - H) (solids) value Code (NV) Chain-Stopped

Economical with good humidity Kelsol® 3940-G4-70 91458 70 G4 8.75 Z6+ Oxidizing 36 - 40 60 resistance

Economical with good corrosion Kelsol® 3941-B2G2-70 91481 70 B2G2 8.70 Z6+ Oxidizing 36 - 40 86 resistance

Economical with good corrosion Kelsol® 3941-G4-70 91457 70 G4 8.85 Z6+ Oxidizing 36 - 40 86 resistance; faster dry times than KELSOL 3940-G4-70

B2/G4 Kelsol® 3961-B2G-75 15139 75 8.80 Z5 - Z6 Oxidizing 35 - 39 65 Excellent exterior durability (50/50)

B2/G4 Excellent corrosion resistance with fastest Kelsol® 3964-B2G-70 90256 70 8.85 Z6± Oxidizing 38 - 42 94 (50/50) dry time

B2/G4 Economical with excellent Kelsol® 3966-B2G-70 91153 70 8.85 Z6± Oxidizing 38 - 42 94 (50/50) hot hardness

B2/G4 Good balance of performance Kelsol® 3969-B2G-70 91449 70 8.70 Z6+ Oxidizing 36 - 40 85 (50/50) properties and value

Kelsol® 3969-G2-70 91463 70 G2 8.83 Z6+ Oxidizing 36 - 40 85 Good performance and value

Good combination of corrosion, Kelsol® 3969-G4-70 91742 70 G4 8.85 Z6 - Z6+ Oxidizing 36 - 40 85 humidity and water resistance Dispersion

W/ 1600 Ultra low VOC; good gloss Kelsol® 580-W-42 14896 42 8.90 Oxidizing 12 - 17 154 Ammonia (CPS) development

W/ 900 Kelsol® 585-W-43 14897 43 8.90 Oxidizing 12 - 17 114 Ultra low VOC; very fast dry Ammonia (CPS)

4 5 Alkyds Water Reducible (continued)

Product Density viscosity Hydroxyl Product % Solids Solvent oil type Acid value comments Code (Lbs/GAl) (G - H) (solids) value (NV) short oil

B2/G4 Z4 + 1/2 - Kelsol® 3905-B2G-75 15126 75 8.55 Oxidizing 38 - 42 46 Excellent blending resin for emulsions (50/50) Z5 + 1/2

B2/G4 Kelsol® 3906-B2G-75 15127 75 8.65 Z6± Oxidizing 39 - 43 46 Excellent dip tank stability (50/50)

B2/G4 Good exterior durability and salt Kelsol® 3907-B2G-75 15128 75 8.55 Z6+ Oxidizing 39 - 43 39 (50/50) spray; fast dry

Z5 + 3/4 - Capable of higher solids at dip Kelsol® 3912-G4-75 91212 75 G4 8.83 Oxidizing 28 - 32 60 Z6 + 1/4 tank viscosities

medium oil

B2/G4 Z5 + 1/2 Kelsol® 3902-BG4-75 15123 75 8.56 Oxidizing 38 - 42 28 General purpose resin; good flexibility (50/50) - Z6

B2/G Z5 + 1/2 - Economical with very good flexibility; high Kelsol® 3910-B2G-75 15142 75 8.60 Oxidizing 39 - 43 65 (64/36) Z6 + 1/4 OH value for melamine crosslinking

long oil

G2/G5 Architectural and industrial primers, semi- Kelsol® 3922-HV-G-80 15257 80 8.65 Z6 Oxidizing 52 - 58 85 (75/25) gloss and gloss systems; good shelf stability

Modified Oils

W/G4 Kelsol® 3931-WG4-45 15148 45 8.30 T - V + 1/2 Linseed 85 - 97 -- Excellent wood penetration (80/20)

W/G4 V + 1/2 - Kelsol® 3939-WG4-45 15169 45 8.00 Linseed 73 - 85 -- Excellent dry over tannin-containing wood (80/20) Z1 + 1/4

Phenolic modified; exhibits excellent B2/G Z3 Kelsol® 3950-B2G-70 15156 70 8.43 - 8.53 Oxidizing 39 - 43 -- adhesion, fast air dry, resists lifting by (70/30) (approx.) strong solvents 6 7 Alkyds Solvent-borne Reduced viscosity oil% Min. Product Gardner % PA Reducing Product % Solids Solvent Density Acid value oil type or Oil viscosity viscosity Solids comments Code (Lbs/GAl) (solids) Min NV (G - H) Solvent Color Length Long oil

Standard long oil; architectural and Beckosol® 10-060 10060 70 M 7.98 5.5 8 24 Soya 65 Z-Z2 C - F 50 M maintenance enamels; meets TT-r- 266, Type 1, Class A

Architectural and maintenance Beckosol® 10-061 10061 60 M 7.73 5.5 8 24 Soya 65 T - V C - F 50 M enamels; meets TT-r-266, Type 1, Class B

High solids vehicle for Beckosol® 10-065HVM 10065 70 M 7.85 10 6 23.5 Soya 65 Z3 - Z5 G - K 50 MO architectural enamels

High solids long oil alkyd for Beckosol® 10-539 10539 90 M 8.20 10 6 ND oxidizing Long Z1 - Z3 I - K 70 M architectural enamels; VOC<250 g/L

High solids vehicle for Beckosol® 1271 14573 97 min -- 8.35 6-10 10 16 Linseed 77 W - Y E - H 80 M architectural enamels

High solids vehicle for Beckosol® 1272 14576 97 min -- 8.35 6-10 10 16 Soya 77 W - Y E - H 80 M architectural enamels

Beckosol® 2502-ML-60 17515 60 M 7.70 10 6 -- Soya Long Z2 - Z4 S - U 50 M Architectural enamels

Architectural enamels; faster Beckosol® 4026-M-66 95952 60 M 7.75 10 7 25 Soya 62 W - Y F - I 50 M drying long oil

Beckosol® AX-119M 91026 60 MO 7.65 7 6 24 Soya 62 Z3 - Z5 B - D 40 MO Architectural enamels

8 9 Alkyds Solvent-borne (continued) Reduced viscosity oil% Min. Product Gardner % PA Reducing Product % Solids Solvent Density Acid value oil type or Oil viscosity viscosity Solids comments Code (Lbs/GAl) (solids) Min NV (G - H) Solvent Color Length medium oil

Beckosol® 11-029M 11029 40 MO 7.27 10 6 30 Soya 52 Z3-Z5 G - 1 30 MO Wood primers; high drink resin

Standard medium oil; industrial Beckosol® 11-035 11035 50 M 7.60 8 8 35 Soya 52 Y - Z2 F - J 40 M primers and enamels

Industrial primers and enamels ; ® Soya/ Beckosol 11-070 11070 50 M 7.60 8 10 31 Linseed 56 V - Y C - G 40 M meets Federal specs TT-R-266 and Type III

® Traffic paints; industrial primers Beckosol 11-081 11081 50 V 7.44 8 8 35 Linseed 52 Z - Z2 G - J 40 V and enamels

Beckosol® 11-090 11090 60 V 7.72 8 8 34 Soya 53 Z3 - Z5 D - G 45 V Traffic paints

Industrial primers and enamels; Beckosol® 11-112 11112 50 M 7.62 10 6 34 Soya 53 Z4 - Z5 S - V 40 M high drink resin

Beckosol® 11-630 11630 50 M 7.65 10.5 8 35 Soya 50 Z4 - Z6 Q - U 40 M Industrial primers and enamels

Beckosol® 3101-ZP-40 17500 40 MO 7.41 10 6 -- Soya Medium Z1 - Z3 F - H 25 P Interior flat finishes

short oil

Standard short oil; high viscosity Beckosol® 12-054 12054 50 X 8.32 8 6 41 TOFA 32 Z2-Z4 K - N 40 x baking enamels with good initial color and very good exterior durability

Excellent exterior durability; meets Siliconized Beckosol® 1700-M-60 14727 60 M 7.90 12 8 -- Soya V - X H 50 M Federal specification TT-E-490E Short and TT-E-1593B

Beckosol® 6065-X-50 14701 50 X 8.30 10 4 -- TOFA Short Z1 - Z3 ------Economical fast drying enamels

10 11 Alkyds Solvent-borne (continued) Reduced viscosity oil% Min. Product Gardner % PA Reducing Product % Solids Solvent Density Acid value oil type or Oil viscosity viscosity Solids comments Code (Lbs/GAl) (solids) Min NV (G - H) Solvent Color Length Chain-stopped

Rapid dry medium; industrial Beckosol® 2635-M-50 91644 50 M 7.79 10 4 -- Soya Medium Z6 max 32-60 40 X Strokes primers and enamels

Fast dry durable HS industrial Beckosol® 6440-A4-85 14762 85 A4 8.60 10 8 -- Sunflower Medium Z4 - Z5 C - F 60 A4 finishes

Standard chain-stopped; fast dry enamels, shopcoats, and conversion Beckosol® 12-102 12102 50 X 8.28 8.5 6 -- TOFA Short X - Z E - H 40 X varnishes ; good hardness and color; good exterior durability; rapid response with UF and MF resins

Fast dry enamels, shopcoats, and conversion varnishes; good hardness Beckosol® AB-125 90108 50 X 8.40 7.5 5 -- TOFA Short Z2 - Z4 D - E 34 X and color; good exterior durability; rapid response with UF and MF resins

Fast dry enamels and shopcoats; Beckosol® EP-2692 17551 50 X/V (75/15) 8.16 14 5 -- oxidizing Short Z - Z4 ------good hardness and color

High solids; fast dry; low VOC Beckosol® 6421-X-75 90082 75 X 8.95 10 8 -- Sunflower Short Z6± B - F 60 K3 enamels and shopcoats

High solids; fast dry; near HAPs Beckosol® 6422-K3-75 91044 75 M 8.70 10 8 -- Sunflower Short X -Z ------free; low VOC enamels and +1/2 +1/2 shopcoats

K3/K4/A150 High solids; fast dry; near HAPs Beckosol® 6422-K3K4-75 91649 75 8.80 10 8 -- oxidizing Short ------free; low VOC enamels and Z2-Z3+1/4 (45/45/10) shopcoats

12 13 Alkyds Solvent-borne (continued) Reduced viscosity

Product Gardner % PA Reducing Product % Solids Solvent Density Acid value oil type Modifier viscosity viscosity Solids comments Code (Lbs/GAl) (solids) Color Min NV (G - H) Solvent

copolymers

Sanding sealers, enamels, Amberlac® 1001 14427 60 M 7.50 8.3 4 -- Linseed VT Mod. X - Z B - E 40 M aerosol paints

Sanding sealers, dry fog coatings, Amberlac® 1074 14428 60 V 7.40 7 4 -- Linseed VT Mod. Y - Z1 C - F 40 V aerosols; very fast dry

Sanding sealers, enamels, aerosol Amberlac® 13-038 13038 50 V 7.37 10 5 -- Soya VT Mod. X - Z1 E - H 35 V paints

Acrylic General topcoats with fast dry; good Amberlac® 13-046 13046 50 X 8.18 14 5 -- Soya T - V D - F 40 X Mod. exterior durability, gloss and color

Acrylic General topcoats with fast dry; Amberlac® 13-802 13802 50 X 8.00 14 4 -- DCO N - R ------excellent exterior durability, gloss Mod. and color

Amberlac® 3704-V-60 14921 60 V/T 7.50 14 6 -- Proprietary VT Mod. X - Z ------High solids for lower VOC primers

14 15 Alkyds Solvent-borne (continued) Reduced viscosity

Product Gardner % PA Reducing Product % Solids Solvent Density Acid value oil type Modifier viscosity viscosity Solids comments Code (Lbs/GAl) (solids) Color Min NV (G - H) Solvent

Modified

X/V Drum, toy and chassis enamels; Beckosol® 10-015 10015 60 8.08 20 10 27 Linseed Phenolic X - Z G - J 40 V (50/50) fast drying; good water resistance

Drum, toy and chassis enamels; X/V Beckosol® 10-613 10613 60 7.78 25 10 15 TOFA Phenolic Y - Z1 F - J 40 V 1000% MS tolerance; fast drying; (94/6) good water resistance

Lift resistant primers; drum, toy Linseed/ and chassis enamels; fast drying; Beckosol® 12-079 12079 50 X 8.29 20 14 40 Rosin/ X - Z1 F - J 40 X CWO Phenolic good water resistance; meets Federal specification TT-P-664D

Phenolic varnish used as a modifier for long and medium oil alkyds to Beckosol® 13-204 13204 50 S 7.90 20 15 -- Oxidizing Phenolic T - V ------improve through dry, hardness, water resistance and recoatability

High chemical resistance and Beckosol® 91-169 91169 76 A100 9.55 6 7 -- Oxidizing Chlorinated N - R ------hardness; high solids

Lift resistant primers; drum, toy and chassis enamels; fast drying; Beckosol® 3859-Z-80 91072 80 K3 8.80-9.00 18.5 10 -- Oxidizing Rosin/ X - Z ------Phenolic good water resistance; meets Federal specification TT-P-664D

Lift resistant primers; drum, toy Linseed/ and chassis enamels; fast drying; Beckosol® 663-X-50 14668 50 X 8.30 29 10 38 Rosin/ N - R G - K 40 X Tung Phenolic good water resistance; meets Federal specification TT-P-664D

Lift resistant primers; drum, toy Linseed/ W+1/4- and chassis enamels; fast drying; Beckosol® 663-6X3-50 14667 50 V/T/B1 7.80 29 10 38 Rosin/ B - E 40 V/T/B1 Tung Phenolic Y+1/4 good water resistance; meets Federal specification TT-P-664D

16 17 Alkyds Solvent-borne (continued) Reduced viscosity oil% Min. Product Gardner % PA Reducing Product % Solids Solvent Density Acid value oil type or Oil viscosity viscosity Solids comments Code (Lbs/GAl) (solids) Min NV (G - H) Solvent Color Length Non-oxidizing Oil Plasticizer for nitrocellulose Beckosol® 12-021 12021 60 T 8.65 8.5 3 47 Coconut 31 X - Z J - M 50 T lacquers; light-colored baking enamels

Standard coconut; plasticizer for Beckosol® 12-035 12035 60 X 8.65 8.5 3 47 Coconut 31 Z1 - Z3 A - D 40 X nitrocellulose lacquers; light- colored baking enamels

Improves elongation and flexibility Beckosol® 1351 14739 97 Min -- 8.60 10-15 5 -- Castor Long W - Y ------of nitrocellulose lacquers

Improves elongation and flexibility Beckosol® 1477-X-65 14652 65 X 8.60 8 6 -- Castor -- X - Z ------of nitrocellulose lacquers

Plasticizer for nitrocellulose Beckosol® 2575-X-60 14653 60 X 8.70 10 3 -- Coconut Short Z2 - Z4 C - E 40 X lacquers; light-colored baking enamels

Plasticizer for nitrocellulose Beckosol® 90-095 90095 70 A4/K3 9.02 12 2 30 Coconut 45 Z1 - Z3 D - F 50 A4 lacquers; light-colored baking enamels

High solids; plasticizer for Beckosol® 90-185 90185 80 A4/K3 9.21 12 3 38 Coconut 28 Z4 - Z6 K - N 50 MS nitrocellulose lacquers; light- colored baking enamels

T/X/B Conversion varnish; light colored Beckosol® 91-689 91689 70 8.84 7 3 -- Coconut Short Z1 - Z3 ------(8/34/58) furniture lacquers

18 19 Oils

Product Gardener Iodine Product viscosity viscosity Density Acid value comments Code (stokes) (G-h) (Lbs/GAl) (solids) Color Value

Raw Linseed Oil Well settled and double filtered; it conforms to Federal specification Raw 14402 0.50 A 7.70-7.74 4 13 177 - 195 TT-L-215 and ASTM D 234-82 Boiled linseed oils

Anti-spalling compound; dries in 12-16 hours; conforms to Federal Boiled 14491 0.50 A 7.71-7.80 6 13 170 - 190 specification TT-L-190 and ASTM specification D 260-80, Type I

Paints containing blacks and other dry retardant pigments; dries Double Boiled 14492 0.70 B 7.75-7.79 7 16 165 - 180 in 8 hours; meets ASTM D 260 Type II and AASHTO M 233-79 specifications; raw linseed oil with driers added Semi-Oxidized Linseed Varnish Oil A slightly oxidized, heat break-free oil for litho varnishes and patent Aged 14451 0.90-1.40 D 7.85-7.87 2-5 11 150 - 170 leather; fast kettle polymerization Linseed Varnish/Grinding oils For light-colored varnishes and alkyds, white enamels, etc.; alkali Superior 14481 0.50 A 7.70-7.73 0.3 6 177 - 190 refined and offers excellent heat bleaching; conforms to TT-L-1155 specifications

A-R Varnish For white paints, light tints, etc.; oil is alkali refined for 14490 0.40 A- 7.70-7.73 2-3 6 170 - 190 and Grinding excellent wetting properties; ideal for reactive pigments

Modified linseed oils

Chemically treated linseed; polymerizes rapidly, dries fast, and has Kellin U-V 14506 6.3-11 U-W 7.98-8.03 8-14 8 120 - 145 excellent water resistance; for printing inks

Redwood finishes, varnishes and enamels; Esskol bodies faster than Esskol Y-Z 14502 18-23 Y-Z 8.09-8.13 12-17 8 135 - 155 Kellin; chemically modified linseed oil

Cykelin 14500 46-64 Z3-Z4 8.10-8.13 4 10 150 - 162 Varnishes, enamels aluminum paints, trim and trellis, cold cut varnishes, reinforcement oil; Dicyclopentadiene copolymers of linseed oil that produce vehicles of quick hard dry and excellent Cykelin 70 14501 5.0-8.9 S-V 7.55-7.65 1-4 11 100 - 115 water and alkali resistance

20 21 Oils (continued)

Product Gardener Iodine Product viscosity viscosity Density Acid value comments Code (stokes) (G-h) (Lbs/GAl) (solids) Color Value

polymerized linseed oils

These are the highest quality polymerized oils available; produced to remove all traces of decomposed matter; their low aid, light color, mini-mum after yellowing-suggest uses in paints, varnishes, M-37 OKO 14470 790-960 Z9 8.04-8.07 3 6 115 - 130 enamels, flats, aluminum paints, printing inks, lithographic varnishes, and brake linings; OKO’s are available to meet all requirements of Federal specification TT-L-201, Type II

T-1215 X-Y 14474 13-18 X-Y 7.93-7.98 6-9 7 122 - 132 Exterior house paints, varnishes, enamels, and flats; T-1215’s are available to meet all requirements of Federal Specification TT-L-201, Type I T-1215 Z2-Z4 14477 36-63.4 Z2-Z4 7.97-8.00 6-9 8 115 - 125

soybean varnish oils Alkyds, varnishes, enamels for whites and light tints; alkali Superior 14421 0.40 A- 7.62-7.64 0.3 5 126 - 136 refined; excellent heat, bleach, and color; meets TT-S-600, Type I and ASTM D 1462

Alkyds, varnishes, and enamels; alkali refined; heat and acid Non-Break 14420 0.40 A- 7.62-7.65 0.5 12 126 - 136 break-free

oxidized soybean oils

Special T-Blown Z2-Z4 14586 36-64 Z2-Z4 8.19-8.27 6-12 8 60 - 85 Caulking compounds, plasticizers; contains no drier; good package stability

Special T-Blown Z5-Z6 14587 98-148 Z5-Z6 8.25-8.29 7-14 10 60 - 80

Modified Soybean oils

Drisoy G-I 14613 2.0-2.5 G-J 7.82-7.87 6-8 6 110 - 130 Varnishes, enamels, exterior house paints, and printing inks; chemically-treated soybean oils; dry like linseed; recommended for general replacement of linseed oil Drisoy Y-Z 14614 17-23 Y-Z 7.91-7.97 4-8 9 95 - 110

22 23 Oils (continued)

Product Gardener Iodine Product viscosity viscosity Density Acid value comments Code (stokes) (G-h) (Lbs/GAl) (solids) Color Value soybean oil Plasticizers

Hydroxl Value =112, Lacquers, coated fabrics, artificial leather; Soy Solinox T 14590 5.5-6.3 T-U 8.13-8.20 8-12 11 75 - 90 chemically-treated soybean oils; improved compatibility with hydroxyl containing resins such as N/C soybean Lecithins

Emulsifying and dispersing agent for protective coatings, Kelecin F 14783 150 max Z6 8.45-8.55 32 10* -- mastics, animal feeds, automotive specialty chemicals, textiles, rubber processing, plastics, cosmetics, and food products

Kelecin 1081 14908 25-60 Z2 8.53-8.63 22-31 12 95.00 Water-dispersible lecithin for water emulsion paints

Product Gardener Product % Solids solvent Acid value viscosity viscosity Density comments Code (solids) (stokes) (G-h) Color (Lbs/GAl) Miscellaneous Modified Oils

Flexible, long oil oxidizing copolymer supplied at 70% Admerol® 75-M-70 14406 70 M 4.5 4.7 - 6.7 R-U+ 11 7.56-7.66 solids for TT-V-81F and TT-V-121G

Water, alkali and abrasion-resistant copolymer resin Admerol® 351-M-70 14408 70 M 2.2 23 - 36 Z-Z2 13 7.75-7.85 for interior primers and finishes

24 25 Polyesters

Product hydroxyl Acid value Product % solids Solvent viscosity TYPE comments (stokes) value (solids) Code (solids) water dispersiblE

Water-dispersible, White or light-colored baking enamels, clear Aroplaz® 4097-WG4-55 15158 55 W/G4 25-50 120 58 - 66 acrylic modified baking formulations

Excellent cure response with 20% to 30% Aroplaz® 5293-B-75 15120 75 B 20-35 180 55 - 65 Water-dispersible amino crosslinkers, excellent flexibility, impact resistance, stain and chemical resistance

High gloss, color and gloss retention, good Aroplaz® 7070-B2G-85 91307 85 B2/G4 550-750 75 58 - 68 Water-dispersible flexibility, chemical resistance

High gloss, color and gloss retention, good Aroplaz® 7070-G4-75 91758 75 G4 90-130 75 58 - 68 Water-dispersible flexibility, chemical resistance solvent-borne

Exterior coil coatings requiring the Aroplaz® 1720-Z-60 15244 60 A6/A150/B 2-8 50 5 max Silicone modified ultimate in durability

Coil Coatings, High hardness with good flexibility; Aroplaz® 5725-Z-65 14734 65 A150/A6 25-35 30 10 max Linear good weatherability

Coil Coatings, High hardness, fast viscosity reduction for Aroplaz® 6025-Z-65 14731 70 A150/A7 24-34 40 8 max Linear higher solids formulas

Excellent flexibility with good hardness Coil Coatings, development and overbake color stability; Aroplaz® 6126-Z-65 90168 65 A150 63-96 40 10 max Linear offers good QUV gloss retention and Xenon weatherometer gloss retention

Economical with good hardness and Aroplaz® 6749-ZA6-90 90065 90 X/A6 70-120 -- 10 High Solids flexibility

Designed for baking enamels, ® Aroplaz 6820-K4-90 91312 90 K4 27-47 1 40 5 max High Solids high hardness, low VOC

Coil Coatngs, Coil-coating applications requiring high Aroplaz® 7757-S 95891 70 A150 63-148 -- 12 max Slightly Branched hardness and excellent overbake color retention

AROPLAZ 7757-S Coil, can and general industrial Aroplaz® 91-341 91341 70 G4/X 45-100 30 12 max Resin applications

26 27 Solvent-borne Urethanes

Product Acid Gardner Product oil % Solids solvent solvent VOC Viscosity density substrate comments Code (%) (g/L) value (stokes) Color (lbs/gal)

Uralkyds Wood & Urotuf® F14-M-55 91189 Soya 55 MS 45 410 5.0 11 - 18 5 7.6 Low film color Metal

Wood & Urotuf® F16-M-60 90200 Soya 60 MS 40 370 5.0 23 - 46 6 7.7 High film hardness Metal

Wood & Urotuf® F17-M-60 91046 Soya 60 MS 40 370 2.0 6 - 11 7 7.64 Blending resin Metal

Wood & Urotuf® F19-M-50 14943 Sunflower 50 MS 50 455 3.0 23 - 36 5 7.55 Exterior durability Metal

® Wood & Urotuf F21-M-50 91261 Proprietary 50 MS 50 460 2.0 5 - 9 4 7.6 Metal High durability oil modified

Wood & ® Low film color, high gloss Urotuf F47-M-60 90194 Soya 60 MS 40 365 2.0 27 - 46 6 7.60 Metal

Wood & ® Soya Fast dry, easy flattening Urotuf F48-M-50 14950 50 MS 50 450 2.0 27 - 46 4 7.45 Metal

Wood & ® High gloss Urotuf F77-M-60 14956 Linseed 60 MS 40 360 1.7 18 - 27 6 7.55 Metal

Wood & Urotuf® F78-T-50 Fast dry, easy flattening 14960 Linseed 50 Toluene 50 480 2.0 27 - 46 5 8.02 Metal

Wood & ® Fast dry, easy flattening Urotuf F78-X-50 14961 Linseed 50 Xylene 50 485 2.0 27 - 46 5 8.05 Metal

Wood & ® Fast dry, easy flattening Urotuf F78-M-50 14959 Linseed 50 MS 50 450 2.0 27 - 46 5 7.45 Metal

Wood & ® High gloss, VOC compliance Urotuf F83-M-75 91735 Proprietary 75 MS 25 235 1.0 50 - 75 6 7.85 Metal

Wood & Urotuf® F87-M-80 Proprietary Blending resin 90080 80 MS 20 190 2.5 27 - 46 6 7.90 Metal

Wood & High gloss, compliance using Urotuf® F89-E3M-55 91861 Linseed 55 MS/VMS 34/11 350 1.8 2.5 - 3.2 6 7.60 Metal exempt solvent

Wood & High gloss, low color, compliance Urotuf® F90-E3M-55 91852 Soya 55 MS/VMS 34/11 350 1.8 2.8 - 3.7 5 7.60 Metal using exempt solvent 28 29 Moisture Cure Urethanes NCO Product Gardner Product % Solids solvent solvent VOC Content % Viscosity density substrate comments Code (%) (g/L) (stokes) Color (lbs/gal) on NV aromatic

Wood, Concrete, Urotuf® M21-X-40 14976 40 X 60 580 6.2 0.7 - 1.3 1 7.98 Interior abrasion resistant coatings Metal

Wood, Concrete, Urotuf® M23-X-56 90086 56 X 44 440 8.2 0.3 - 1.0 2 8.36 Low VOC version of UROTUF® M21 Metal

Wood, Concrete, Lower VOC version of Urotuf® M26-X-64 14989 64 X 36 368 8.2 0.5 - 2.0 2 8.51 Metal UROTUF® M21

Wood, Concrete, Lowest VOC version of Urotuf® M26-E2X-64 91824 64 E2/X 6/30 335 8.1 0.5 - 2.0 1 8.60 Metal UROTUF® M21

Wood, Concrete, High hardness, OEM Urotuf® M37-A6X-42 14980 42 A6/X 3/55 567 7.8 0.9 - 2.0 1 8.15 Metal wood finishes

Wood, Concrete, Non-catalyzed version of Urotuf® M37-A6X-48 91315 48 A6/X 26/26 530 9.8 0.3 - 0.9 3 8.60 Metal UROTUF® M86, improved stability

Wood, Concrete, Urotuf® M37-A6X-50 14991 50 A6/X 25/25 513 7.6 0.7 - 1.7 3 8.55 Fast cure Metal

Aliphatic

Wood, Concrete, Urotuf® M22-X-40 14864 40 X 60 570 8.1 0.5 - 1.1 1 7.98 Exterior abrasion resistant coatings Metal

Wood, Concrete, Urotuf® M25-X-56 90087 56 X 44 440 12.7 0.9 - 1.5 1 8.37 Low VOC version of UROTUF® M22 Metal

Wood, Concrete, Lower VOC version of Urotuf® M27-X-63 14865 63 X 37 380 8.2 1.5 - 3.0 1 8.53 Metal UROTUF® M22

30 31 Water-borne Urethanes

Product density Modulus Product % Solids COsolvent VOC Acid Value Viscosity Elongation substrate comments Code (g/L) (cps) (lbs/gal) 100% (%) (PSI) Thermoplastic Water-borne Urethanes

Rigid Plastic, High hardness, excellent chemical Urotuf® L51 15180 30 NMP 405 23.0 30-160 8.75 4000 150 Wood, Metal resistance

Rigid Plastic, Higher solids version of Urotuf® L51-35 15186 35 NMP 410 22.9 50-1000 8.81 -- 100 Wood, Metal UROTUF® L51

Rigid Plastic, Excellent heat color stability, Urotuf® L512 90230 30 NMP 415 22.7 10-75 8.76 -- 00 Wood, Metal solvent resistance

NMP free, moderate film hardness, Urotuf® L522-G8W-40 91864 40 G8 200 21.5 100-600 8.66 1500 400 Semi-rigid Plastic excellent color stability

Moderate film hardness, excellent Urotuf® L522-MPW-40 91321 40 160 21.5 50-300 8.80 1250 410 Semi-rigid Plastic NMP color stability

Highly flexible films, excellent Urotuf® L53-MPW-30 91152 30 NMP 355 24.3 20-100 8.62 1100 410 Semi-rigid Plastic abrasion resistance

High acid content for polyaziridine Urotuf® L54-MPW-32 91135 32 NMP 415 46.9 500-2000 8.80 3000 300 Semi-rigid Plastic crosslinking

Flexible Plastic, Soft, highly flexible films, excellent Urotuf® L55 15185 35 NMP 240 27.7 50-500 8.53 500 660 Leather hydrolytic stability

Flexible Plastic, Very soft, highly flexible films, Urotuf® L56-MPW-36 91151 36 NMP 290 21.7 70-1000 8.48 350 700 Leather excellent hydrolytic stability

Rigid Plastic, HAPS free, high film hardness, Urotuf® L57-MPW-35 91327 35 NMP 260 30.0 20-100 8.76 4000 220 Wood, Metal good abrasion resistance

Flexible Plastic, Soft, highly flexible films, Urotuf® L59-40 91506 40 210 20.5 200-1000 8.88 500 810 NMP Leather blending resin

Flexible Plastic, Urotuf® L60-MPW-45 91526 45 NMP 160 18.0 500-2000 8.89 1200 750 Very low gloss, highly flexible films Leather

Flexible Plastic, OH functional, very low gloss, Urotuf® L62-G8W-40 91732 40 160 14.5 500-2000 8.80 650 500 G8 Leather highly flexible films

Rigid Plastic, Higher solids, lower NMP version Urotuf® L63-MPW-38 91974 38 NMP 270 23.2 50-300 8.62 4500 200 Wood, Metal of UROTUF® L51

32 33 Water-borne Urethanes (continued)

Product density Modulus Product % Solids COsolvent VOC Acid Value Viscosity Elongation substrate comments Code (g/L) (cps) (lbs/gal) 100% (%) (PSI) self crosslinking oil-Modified Urethanes

Urotuf® F96-MPW-32 91210 32 NMP 190 29.1 50-300 8.50 N/A N/A Wood, Metal Good exterior durability

Excellent durability, low color Urotuf® F97-MPW-33 91293 33 NMP 185 26.7 50-300 8.50 N/A N/A Wood, Metal accentuates wood appearance

Pre-catalyzed (Mn) version of Urotuf® F98-MPW-31 91733 31 NMP 180 26.7 20-140 8.92 N/A N/A Wood, Metal UROTUF® F97

Precatalyzed (proprietary) version Urotuf® F982-MPW-33 91875 33 NMP 182 26.7 50-300 8.50 N/A N/A Wood, Metal of UROTUF® F97

Urotuf® F99-MPW-36 91786 36 None 135 26.4 50-100 8.60 N/A N/A Wood, Metal Acrylic modified, economical

Wood, Metal, High solids for higher film build; Urotuf® F100-W-36 91795 36 None 50 25.6 100-3000 8.53 N/A N/A Concrete excellent durability

Higher solids version of Urotuf® F101-MPW-45 91856 45 NMP 140 18.0 200-1500 8.55 N/A N/A Wood, Metal UROTUF® F97

34 35 Polyols for 2K Urethanes Product Hydroxyl Product % solids solvent Viscosity Applications comments Code (stokes) Equivalent Weight (solids)

acrylic polyols Fast dry with moderate isocyanate demand 2K solvent based Arolon® 6436 91602 70 A6 -- 560 resulting in moderate cost-in-use; Capable of topcoats polyurethane topcoats at 420 g/L

2K solvent based Lowest isocyanate demand acrylic polyol resin; Arolon® 6437 91745 80 A4 -- 640 topcoats capable of polyurethane topcoats at 340 g/L

Automotive Excellent UV resistance; excellent scratch and Arolon® 6473 91787 71 A4 -- 326 clear coats mar resistance

Water-borne polyol to be used with water High Gloss Arolon® 5900 91812 43 Water 500 max 84 dispersible isocyanates for high gloss, durable Topcoats finishes at very low VOC

Product Hydroxyl Product % solids solvent Viscosity acid value Type comments (stokes) Equivalent Weight (solids) Code (solids) Polyester polyols Excellent gloss and color retention; Aliphatic Aroplaz® 4294 15097 100 -- 300 - 600 288 4 max excellent chemical resistance; ideal for Polyester Polyol two component flooring topcoats

Aliphatic Polyester Excellent chemical resistance and Aroplaz® 6420 91536 90 K4 40 - 100 270 3 max Polyol, Branched exterior durability

Product Hydroxyl Product % solids solvent Viscosity acid value Type comments (stokes) Equivalent Weight (solids) Code (solids) Alkyd polyols

Alkyd Polyol, Beckosol® 6193-K3-80 91003 80 K3/X (92/8) 8.5 825 10 max Fast tack free time; High hardness Branched

36 37 Epoxy REsins

Product Gardner Product % solids solvent Viscosity density EEW type comments Code (cps) (lbs/gal) (solids) Color

Reactive Diluents Low viscosity, high molecular weight, Epotuf® 37-051 37051 100 -- 250 8.50 675 1 Polyfunctional aliphatic polyfunctional epoxy resin, compliant with FDA 175.105*

Aliphatic monofunctional epoxy diluent based Epotuf® 37-058 37058 100 -- 13 7.40 290 1 Multifunctional on C12-C14 alcohol; low viscosity, low volatility and toxicity

liQuid resin

Epotuf® 37-140 37140 100 -- 12500 9.70 185 1 Bis-A Liquid Resin Bis-A; standard undiluted liquid epoxy resin

water-borne liQuid resin

Bis-A Liquid Resin Dispersion of liquid epoxy resin; used to cure Epotuf® 37-143 37143 78 W 3000 9.30 200 milky Dispersion EPOTUF® 37-680 and EPOTUF® 37-685

diluted resin Medium viscosity; 100% reactive epoxy resin Aliphatic Epotuf® 37-100 37100 100 -- 4000 9.40 217 3 based on Bis-A diluted 15% by weight with Polyfunctional EPOTUF® 37-051

Bis-A/Bis-F epoxy resin blend diluted 12% by weight Epotuf® 37-108 37108 100 -- 1400 9.30 190 2 Bis-A/Bis-F with EPOTUF® 37-058, meets ANSI 118.3 for water washable grouts when cured with EPOTUF® 37-628

Monofunctional Low viscosity; 100% reactive epoxy resin based on Epotuf® 37-127 37127 100 -- 600 9.20 197 1 (Alkyl Glycidyl Bis-A diluted 20% by weight with EPOTUF® 37-058, compliant FDA 175.300, 176.170 and 176.180* Ether C12-C14) Monofunctional Low viscosity; 100% reactive epoxy resin based on Epotuf® 37-128 37128 100 -- 750 9.40 200 2 (Aromatic Bis-A, excellent penetration, high filler loading Glycidyl Ether)

Monofunctional Medium viscosity; 100% reactive diluted epoxy Epotuf® 95-406 95406 100 -- 2600 9.40 185 3 (Alkyl Glycidyl resin based on Bis-A diluted 8% by weight with EPOTUF® 37-058 Ether C12-C14)

38 * For FDA applications, contact the Reichhold product regulatory group for specific use limitation information. 39 Epoxy REsins (continued)

Product Gardner Product % solids solvent Viscosity density EEW type comments Code (cps) (lbs/gal) (solids) Color

Modified Resins Improves flexibility, adhesion and weathering; very fast Epotuf® 37-151 37051 100 -- 50000 8.90 500 5 Flexible viscosity reduction curve, elongation up to 25%, compliant with FDA 175.105, 175.300, 176.170 and 176.180*

Flexographic inks, fast air or force dry primers with good Epotuf® 38-572 38572 75 X 2000 8.50 660 7 Flexible corrosion resistance, gloss topcoats, compliant with FDA 175.300*

Urethane modified to provide improved adhesion and chemical Epotuf® 95-472 95472 60 X/K2 1300 8.60 500 3 Urethane and solvent resistance including aerospace hydraulic fluids

Urethane modified to provide improved adhesion and chemical Epotuf® 95-473 95473 60 K2T/K6 900 8.60 300 3 Urethane and solvent resistance including aerospace hydraulic fluids

Elastomer modified resin that produces flexible, impact Epotuf® G293-100 15213 100 -- 195000 8.80 340 10 CTBN resistant films when cured with conventional curing agents solvent cut Resins

Epotuf® 38-505 38505 75 X 11000 9.00 500 3 Type 1 Type 1 epoxy resin

Epotuf® 38-507 38507 75 T 9700 9.10 490 3 Type 1 Type 1 epoxy resin water-reducible epoxy Resins

Epotuf® 38-690 38690 70 G4 15000 8.40 -- 7 Acrylic modified Meets MIL-P-53032 primers; compatible with acrylic emulsions

Fast air or force dry primers with good corrosion resistance, Epotuf® 38-692 38692 70 G4 11000 8.70 -- 5 Epoxy Ester compliant with FDA 175.300*, 176.170 and 176.180*

Epotuf® 38-694 38694 40 W/G2 3500 8.40 -- milky Aqueous Dispersion Pre-neutralized epoxy ester dispersion; low VOC capability

Flexographic inks, fast air or force dry primers with good Epotuf® 91-263 91263 70 G2 49000 8.40 -- 7 Acrylic Modified corrosion resistance, gloss topcoats, compliant with FDA 175.300* solvent cut epoxy Resins Rosin modified epoxy ester for use in clear floor varnishes; Epotuf® 38-406 38406 60 M 3000 7.70 -- 8 Rosin Modified air dry primers for steel; brush applied maintenance finishes compliant with FDA 175.300*

Epoxy ester based on type 4 epoxy for use in baking enamels, Epotuf® 38-411 38411 50 X 700 8.00 -- 6 Epoxy Ester air dry primers, floor enamels, compliant with FDA 175.300*

Epotuf® 91-853 91853 50 E1/A100 16 8.96 -- 6 Epoxy Ester Reduced VOC due to exempt solvent content

40 * For FDA applications, contact the Reichhold product regulatory group for specific use limitation information. 41 Epoxy Curing agents Recommended Product density Viscosity Gel Time Gardner Product % solids AHEW (min @25°C, type comments/applications Code (lbs/gal) (cps) Use Level Color (PHR) 100g mix) aliphatic amines Adhesives; general purpose terrazzo flooring; Epotuf® 37-606 37606 100 8.1 300 85 45 45 5 Adduct grouts. Light color, low viscosity, moderate pot life, good gloss and blush resistant films

Decoupage; protective coatings, modifier in trowelable flooring; fast set adhesives, grouts. Epotuf® 37-667 37667 100 8.0 1100 157 83 16 2 Modified Modified amine with fast cure and good moisture and blush resistance amidoamines

Amide/ General purpose flooring. Moderate viscosity; Epotuf® 37-620 37620 100 7.9 550 94 50 120 10 Imidazoline bonds well to damp concrete

Modified Water-washable grouts; metal and concrete Epotuf® 37-628 37628 100 8.0 350 76 40 112 10 Amide/ primers; highly filled high build flooring. Improved Imidazoline chemical resistance vs. traditional amidoamines; good reactivity in the presence of moisture

General purpose flooring. Improved reactivity vs. Epotuf® 37-630 37630 100 8.1 1050 65 35 40 10 Adduct EPOTUF® 37-620

FDA compliant linings; metal and concrete Epotuf® 91-442 91442 100 8.1 6000 141 75 200 13 Modified primers; self-levelling floor coatings. FDA 175.300 compliant; DOT non-corrosive Cycloaliphatic Amines High solids coatings; chemical resistant flooring. Epotuf® 37-601 37601 100 8.4 300 85 45 50 3 Adduct Room temperature curing; low viscosity; light color; excellent chemical resistance

Adduct Tank and railcar linings, secondary containment Epotuf® 37-701 37701 100 8.9 300 75 40 40 8 Modified Best chemical resistance and acid resistance

Topcoats; sealers; 100% solids industrial maintenance coatings/floor paints. Very low Epotuf® 37-703 37703 100 8.5 80 93 50 32 1 Modified viscosity and good color stability; high gloss and carbamation resistance under adverse conditions

42 * For FDA applications, contact the Reichhold product regulatory group for specific use limitation information. 43 Epoxy Curing agents Recommended Product density Viscosity Gel Time Gardner Product % solids AHEW (min @25°C, type comments/applications Code (lbs/gal) (cps) Use Level Color (PHR) 100g mix) polyamides Electrical potting; encapsulation and casting; adhesives; flooring corrosion and chemical resistant Amide/ coatings; concrete sealer and grouts. Moderate Epotuf® 37-612 37612 100 8.1 14750 130 70 135 10 Imidazoline viscosity & higher reactivity suitable for adhesives and/or wet lay-up laminating. Compliant with FDA 21CFR 175.300 and 175.105* and USDA compliant

Corrosion resistant coatings; adhesive. 70% solids 1-2 Epotuf® 37-618 37618 70 7.8 1450 214 55 12 Amide in xylene; provides flexibility; long pot-life and good days overall properties with solid epoxy resin

1-2 High performance coatings. 60% solids in IPA/ Epotuf® 37-621 37621 60 7.6 1800 833 100 11 Amide days toluene; high molecular weight polyamide

Adhesives and sealants; grouts and mortars; manne Amide/ Epotuf® 37-625 37625 100 8.0 37000 120 65 120 12 and maintenance coatings. Medium viscosity; Imidazoline compliant with FDA 21CFR 175.300*

Electrical potting; encapsulation and casting; Amide/ adhesives; flooring corrosion and chemical resistant Epotuf® 37-640 37640 100 8.3 12000 100 55 165 12 coatings. High imidazoline content; lower viscosity Imidazoline and longer porlife than EPOTUF® 37-625; compliant with FDA 21CFR 175.300*

High solids coatings; rail car coatings; concrete primer and sealer. Low viscosity and no induction Epotuf® 37-650 37650 100 8.4 4750 130 70 120 12 Adduct time; achieves performance similar to high molecular weight traditional polyamide/solid epoxy systems Water-borne Polyamine Adducts Microgel Polyamine Adduct cured with EPOTUF® Microgel Epotuf® 37-680 37680 42 8.9 60 1340 -- -- milky 37-143. Concrete flooring; high gloss topcoats and Polyamine Adduct enamels

Microgel Polyamine Adduct cured with EPOTUF® Microgel Epotuf® 37-685 37685 50 8.9 50 320 -- -- milky 37-143. IM metal primers for light to heavy duty; Polyamine Adduct concrete coatings, capable of VOC <100 g/L

44 * For FDA applications, contact the Reichhold product regulatory group for specific use limitation information. 45 2k Non-isocyanate Resin Systems

Product Product % Solids Solvent viscosity EEW Type comments Code (stokes) (solids)

Epoxy resin

Aliphatic epoxy used to formulate 2K Oxirane-Modified coatings with excellent weatherability; Aroflint® 608 91789 100 N/A 12 225 Ester Used for agricultural and transportation coatings

Oxirane-Modified Economical for medium-duty Aroflint® 303-X-90 15035 90 X 1.75 195 Ester applications

Product Product % Solids Solvent viscosity AEW Type comments Code (stokes) (solids)

Polyester resin

Acid Functional HAPs compliant, low VOC capability, Aroflint® 809 91314 71 K4/G3/D 4 432 Polyester durability

Acid Functional HAPs compliant, improved dry & Aroflint® 810 91859 70 K4/G3/D 13 529 Polyester hardness

Acid Functional Adhesion, hardness, corrosion Aroflint® 404-XX-90 15037 60 A4/V/B/EB 5.5 351 Polyester resistance

Acid Functional Aroflint® D808-XD-71 15039 71 X/A6/D 8 468 Solvent Resistance Polyester

Acid Functional Aroflint® 252-Z1-60 15038 60 M/IBIB/A100 2 524 Flexibility, Durability Polyester

46 47 Powder Resins REsin/ Product Product Suggested C & P Hydroxyl Acid gardner Product hardner viscometer EEW Tg comments Code Type Hardner viscosity (temperature) Value Value color (°C) ratio (cps) Glycidal Functional Acrylic Resins

GMA Acrylic Develops higher gloss Fine Clad® A-257 91335 84/16 DDDA 5100 ICI, 175°C -- -- 480 1 50 Resin, DDDA Cure than Fine Clad® A-254 Glycidal Functional Acrylic crosslinkers

GMA Acrylic Fine Clad® A-229-30-A 91090 -- -- 8000 ICI, 175°C -- -- 530 1 66 One shot matte finishes Curing Agent

GMA Acrylic Fine Clad® A-244-A 91089 -- -- 8000 ICI, 175°C 50 -- 600 1 60 One shot matte finishes Curing Agent

GMA Acrylic Fine Clad® A-249-A 91091 -- -- 4600 ICI, 200°C -- -- 465 1 64 One shot matte finishes Curing Agent

GMA Acrylic Fine Clad® A-266 91466 -- -- 6500 ICI, 200°C -- -- 615 1 46 One shot matte finishes Curing Agent Additive Resins

Hydroxyl and glycidyl functional groups. Improves compatibility between different coatings; Fine Clad® A-241 91130 Additive Resin -- -- 5800 ICI, 175°C 50 -- 600 1 66 increases stain and chemical resistance; recommended for all polyester based powder coatings

Hydroxy functional acrylic resin; increases stain and chemical Fine Clad® A-251 91131 Additive Resin -- -- 2000 ICI, 200°C 107 -- -- 1 53 resistance; recommended for all polyester based powder coatings

48 49 Powder Resins (continued) REsin/ Product Product Suggested C & P Hydroxyl Acid gardner Product hardner viscometer EEW Tg comments Code Type Hardner viscosity (temperature) Value Value color (°C) ratio (cps) Hydroxyl Functional for Urethane Systems

Fine Clad® M-8025 91471 OH Polyester 65/35 B-1530 2000 ICI, 200°C 100 5 -- 2 52 Superior Chemical Resistance

OH Polyester, PCM high flexibility Fine Clad® M-8076 91014 76/21 B-1530 5500 ICI, 200°C 43 4.2 -- 2 66 designed for PCM urethane coatings; 0-T bend

OH Polyester, high Fine Clad® M-8100 91128 87.5/12.5 B-1530 1750 ICI, 200°C 27 4 -- 2 66 Alligator and wrinkle finishes molecular weight

Fine Clad® M-8230 91620 OH Polyester 85/15 B-1530 5750 ICI, 200°C 35 -- -- 3 60 Super durable

Bifunctional and Carboxyl Functional for GMA Acrylic Cure Systems

FINE-CLAD A-249-A Fine Clad® M-8400 91060 Dual Component Various 7900 ICI, 200°C -- 24 -- 2 65 One shot matte finishes FINE-CLAD A-229-30-A

Bifunctional Blocked Isocyanate Fine Clad® M-8402 91062 Polyester, Multi Various FINE-CLAD A-249-A 3500 ICI, 200°C 22 14 -- 2 63 One shot matte finishes Cure Matte System FINE-CLAD A-229-30-A

Bifunctional Blocked Isocyanate Polyester, Super Fine Clad® M-8406 91486 Various FINE-CLAD A-249-A 1750 ICI, 200°C 22 22 -- 3 52 One shot matte finishes Durable Multi FINE-CLAD A-229-30-A Cure Matte System

Carboxyl Functional

COOH Polyester, Fine Clad® M-8911 91545 93/7 TGIC 3500 ICI, 200°C -- 34 -- 3 59 Super durable TGIC Cure

COOH Polyester, Low temperature; Fine Clad® M-8913 91585 93/7 TGIC 3500 ICI, 200°C -- 35 -- 3 59 TGIC Cure super durable

COOH Polyester, Low temperature cure Fine Clad® M-8950 91472 93/7 TGIC 3000 ICI, 200°C -- 34 -- 3 50 TGIC Cure systems

50 51 acrylics

Product Product % Solids Solvent Density viscosity T (°C) MFFT (°C) Applications comments Code (Lbs/GAl) (cps) g

styrene acrylic emulsions

Adhesion to galvanized steel; Arolon® 820-W-49 14920 49 W 8.70-8.90 100-350 13 8 Maintenance primers anti-corrosive pigment stability

Arolon® 845-W-45 14907 45 W 8.75 100-300 67 63 Wood varnishes Fast air dry; excellent chemical resistance

Excellent corrosion and humidity Arolon® 847-W-42 96036 42 W 8.52 500 23 20 Industrial maintenance finishes resistance

Excellent corrosion and humidity Arolon® 848-W-42 91645 43 W 8.58 300 34 24 Industrial maintenance finishes resistance; good block resistance

Arolon® 850-W-45 14905 45 W 8.65 1050 37 47 Plastic coatings Excellent adhesion to plastics

Wood varnishes, blending resin Block resistant; excellent mechanical Arolon® 860-W-45 14906 45 W 8.80 50-500 59 90 for PUDs stability; crosslinkable

Arolon® 881-W-43 96045 42 W 8.86 750 40 40 Wood sealer, prime coat Excellent tannin block; primer/sealer resin

vinyl acrylic emulsions

Synthemul® 40-136 40136 55 W 8.95 1150 20 11 Interior flat and satin finishes Provides good low temperature touch-up

Provides good low temperature touch-up; Synthemul® 40-143 40143 65 W 9.10 1500-2500 16 11 Interior flat and satin finishes higher solids

High scrub latex; Outstanding stain Synthemul® 40-152 40152 55 W 9.00 300 20 13 Interior flat and satin finishes resistance and washability

Excellent workability, sandability, crack Synthemul® 97-300 97300 60 W 9.10 1000-2200 19 8 Tape joint compounds resistance, low temperature performance

Capable of formulating to near 0 g/L VOC; Synthemul® HS-200 96083 64 W 8.90 750 2 0 Interior flat and satin finishes high scrub, low odor

Capable of formulating to near 0 g/L Synthemul® LV-100 91791 55 W 9.00 100-500 6 0 Interior flat and satin finishes VOC; high scrub, Non-APE

Capable of formulating to near 0 g/L VOC; Synthemul® LV-200 91846 55 W 9.00 100-500 6 0 Interior flat and satin finishes high scrub, Non-APE, freeze-thaw stable 52 53 acrylics (continued)

Product Product % Solids Solvent Density viscosity comments Code (Lbs/GAl) (cps) Tg (°C) MFFT (°C) Applications

100% acrylic emulsions General purpose exterior house Capable of formulating to near 100-150 g/L Synthemul® 40-412 40412 50 W 8.70 550 12 5 paints and semi glosses; traffic VOC; excellent exterior durability, mechanical paints stability, and alcohol compatibility

Capable of formulating to 150-200 g/L Synthemul® 40-418-02 40418 51 W 8.80 500 21 23 Interior and exterior semi gloss VOC; excellent block resistance; good wet adhesion; very good gloss development

Interior and exterior penetrating Capable of formulating to 150-200 g/L stains; concrete primers and VOC; excellent adhesion to wood and Synthemul® 40-423 40423 45 W 8.80 500 18 -- sealers; blending resin for concrete; compatible with many other UROTUF® F97-MPW-33 resin systems

Synthemul® CA-100 91826 47 W 8.85 300 12 10 Acrylic cement modifier for Extended open time, wide compatibility, patching mortars excellent tensile and flex strengths

Elastomeric acrylic emulsions

High build elastomeric coatings; Very good elongation, good tensile Arolon® 96-062 96062 50 W 8.70 500 -15 -- vertical concrete coatings; strength, and excellent water resistance; exterior finishes low moisture vapor permeability Water-Reducible acrylic resins

Arolon® 40-425 40425 65 n-Propanol 8.35 3700-9800 44 -- High gloss water-reducible High gloss; good balance of hardness and baking finishes flexibility; excellent shelf stability

Arolon® 559-G4-70 14894 70 2-Butoxy 8.75 130-200 -- -- High gloss water-reducible High gloss; good balance of hardness and Ethanol baking finishes flexibility; excellent shelf stability

54 55 graphic arts resins

Product Gardner paste liquid speciality Product oil type body viscosity acid value comments Code (stokes) Color ink ink coating

Alkyds

NV=50% 6 - 11 Beckosol® 91552-01 91552-01 Fatty Acid TOL 6 15 - 24 X X Specialty solvent-based coatings

Beckosol® 91704 91704 Linseed 9 6500 8 10 max X General-purpose 9 linseed

Grind vehicle for paste pigment dispersions Beckosol® L630 I 23301 Linseed 4 80 10 20 max X as sole vehicle

Beckosol® L680 I 23304 Linseed 3 50 10 12 max X General-purpose 3 linseed

Beckosol® VPW 2037 23308 Linseed 7 735 10 10 max X General-purpose 7 linseed

Beckosol® VPW 2097 23310 Linseed 5 150 10 10 max X General-purpose 5 linseed

Beckosol® 91572 91572 Soya 1 30 6 12 max X General-purpose 1 soya

Beckosol® 91706 91706 Soya 9 6500 6 12 max X General-purpose 9 soya

Beckosol® 91-843 91843 Soya 7 550 6 12 max X General-purpose 7 soya

Beckosol® 91-845 91845 Soya 3 50 6 8 max X General-purpose 3 soya

Specialty 6 soya; especially good for carbon blacks; low Beckosol® S730 FSB 23307 Soya 6 315 10 10 max X tack; excels in heatset systems

Urethane hybrid (linseed uralkyd) for fast-setting and Urotuf® F34-100 14947 Linseed 8 2000 7 1 max X drying systems; low water pickup

56 57 graphic arts resins (continued) Oligomer/ Product Oligomer Gardner paste liquid speciality Product Monomer viscosity acid value comments Code functionality (CPS) Color ink ink coating Composition Energy Curable

Reactive-modifying polyester acrylate that increases flexibility in cured films and can increase adhesion on Aroplaz® VE011 70 TPGDA 23354 1 70/30 5000 5 10 X X X some substrates without causing loss of cure speed; typical use rate is up to 15% in epoxy-acrylate systems; non-yellowing

Epotuf® 18506 18506 2 100/0 2300 2 3 X X X Low-viscosity epoxy-acrylate

2500 2 Epotuf® 3000 45000 2 100/0 (65°C) 2 X X X General-purpose epoxy-acrylate

Epotuf® 3000 25 TPGDA 45002 2 75/25 14000 2 2 X X X 75% cut of epoxy-acrylate in TPGDA

Epotuf® 3400 45100 3 100/0 27500 5 3 X X Good pigment dispersion oligomer

2500 Epotuf® 91275 91275 2 100/0 (65°C) 2 2 X X X General-purpose epoxy-acrylate

Difunctional aliphatic urethane-acrylate for Epotuf® 4200 15 TPGDA -- 2 85/15 3000 2 2 X X X non-yellowing application; adds toughness (65°C) and flexibility to systems

Product paste liquid speciality Product % solids Wt. % VOC viscosity appearance acid value comments Code (cps) ink ink coating

Water-based Specialty WB acrylic that adds immediate water Arolon® 820-W-49 14902 49 2 350 Milky white 13 X resistance to WB film inks; excellent grease resistant properties; most water-resistant acrylic we offer

Specialty WB acrylic for WB film inks; excellent grease Arolon® 847-W-42 96036 42 0 500 Milky white 19 X resistant properties; faster water resistance development than conventional acrylics

Oxidative cure WB epoxy ester; industry standard for Epotuf® 91263 91263 70 30 50000 8 Gardner 59 X X high-performance chemical resistant poly-coated folding carton applications for milk cartons, juice boxes, etc

58 59 graphic arts resins (continued)

Product Gardner Isocyanate paste liquid speciality Product % solids solvent viscosity comments Code (cps) color type ink ink coating

Solvent-based Urethanes High-performance, adhesion-promoting, plasticizing Urotuf® 91-624 91624 71 ETAC/ETOH 550 2 MDI X urethane for nitrocellulose-based flexo and gravure inks; does not degrade heat resistance; ultra-low organo-tin

General-purpose, economical plasticizing urethane Urotuf® 91-633 91633 78 ETAC 2100 1 TDI X for nitrocellulose-based flexo and gravure inks; does not degrade heat resistance; ultra-low organo-tin

General-purpose, TDI-free plasticizing urethane for Urotuf® 91-634 91634 78 ETAC 3800 1 MDI X nitrocellulose-based flexo and gravure inks; does not degrade heat resistance; ultra-low organo-tin

Urotuf 91801-00 is a 75% solids, tin-free, TDI-free polyurethane resin solution reduced in n-Propyl Urotuf® 91-801 91801 75 PAC 1450 2 MDI X acetate. It is designed for use as a plasticizer in ink systems for flexible packaging

Urotuf 91821-00 is a 75% solids, tin-free, polyurethane resin solution reduced in n-Propyl acetate. It is Urotuf® 91-821 91821 75 PAC 470 2 TDI X designed for use as a plasticizer in ink systems for flexible packaging

Melting Product Heptane Viscosity Gardner paste liquid speciality Product point Tolerance (SEC, DIN 4, 20°C) Acid Value comments Code (°C) (mL) 50% in Toluene color ink ink coating hard and ketonic resins High-performance, adhesion-promoting, plasticizing Resafen® 17620 12 urethane for nitrocellulose-based flexo and gravure inks; -- 130-150 8.4-11.4 75-95 (50% in toluene) 85-105 X does not degrade heat resistance; ultra-low organo-tin

General-purpose, economical plasticizing urethane Resafen® 1410 3 X for nitrocellulose-based flexo and gravure inks; does 26001 85-95 -- -- (50% in alcohol) 2 max X not degrade heat resistance; ultra-low organo-tin

60 61 Reichhold EVerywhere Performance Matters

Company Description Brands Reichhold is the world’s largest supplier of unsaturated polyester resins for composites and a leading supplier of Reichhold’s coating product line includes water-borne, solvent borne, 100% solids liquid and coating resins for a wide variety of markets and applications. With its world headquarters in Research Triangle powder coating resins that are sold under the following trade names: Park, North Carolina, USA along with four technology centers and nineteen manufacturing sites spread around the world, Reichhold has the widest global reach of any resin supplier today. Innovations combined with state-of- the-art manufacturing facilities and a sales and distribution network that is far reaching means that Reichhold BECKOSOL® Solvent Borne Alkyds can offer focused solutions for your needs. BECKOSOL AQ® Alkyd Latexes Core Technologies KELSOL® Water-borne & Water-Reducible Alkyds Reichhold offers one of the most comprehensive ranges of technology in the coatings industry today from AMBERLAC® Modified Alkyds & Copolymers traditional alkyds, polyesters, polyurethanes, epoxies and acrylics to more cutting-edge technologies such as alkyd latexes, water-borne oil modified urethanes and water-borne epoxy curing agents. More importantly, AROPLAZ® Polyesters Reichhold doesn’t just sell these technologies; they engineer them, tailor them and offer ongoing support through specialized technical experts. UROTUF® Urethanes EPOTUF® Epoxies & Epoxy Curing Agents Coating Markets Served AROFLINT® Non-Isocyanate 2K Systems For over 80 years, Reichhold has been a pioneer in creating innovative technologies to help coatings formulators meet their customers’ most demanding applications. Whether developing the latest in high-performance protective AROLON® Styrenated & Solution Acrylics, Acrylic Polyols coatings or low-VOC architectural paints, formulators can look to Reichhold for a wide array of technologies used in a variety of markets and applications in the coatings industry. SYNTHEMUL® Non-Styrenated & Vinyl Acrylics RESAFEN® Phenolics Architectural Coatings: FINE-CLAD® Powder Coating Resins Interior/exterior wall paints & primers Trim enamels FINE-TONE® Digital Printing Ink Resins Wood floor finishes DIY stains & varnishes Deck coatings Value Added Services Concrete porch & garage paint At Reichhold, products are constantly tested and technology refined so as to provide customers with high Metal finishes performing products. Each of the global technology centers is equipped to measure physical and performance properties based on standardized test methods, and complete analytical services are available at the world headquarters and technology center. Additionally, Reichhold takes every opportunity to test products in Industrial / Protective Coatings: real-world applications. Along with quality products, Reichhold offers formulation recommendations and Industrial maintenance technical support for the optimization of coating performance. Marine Aerospace Agricultural equipment Global Technology Centers Automotive refinish Reichhold World Headquarters – United States 2400 Ellis Road Durham, NC 27703 OEM Coatings: Tel: +1 919 990 7500 Fax: +1 919 990 7749 Wood cabinetry & furniture Website: www.reichhold.com Factory-applied wood finishes General metals Mexico Tel: +52 712 122 9500 Fax: +52 712 122 0328 Heavy machinery & equipment Brazil Tel: +55 11 4795 8136 Fax: +55 11 4727 6382 Metal furniture & office equipment EMEA Tel: +47 33448600 Fax: +47 33448701 Coil & can Plastic substrates Solvent legend

A1 Ethoxy Ethyl Acetate A4 n-Butyl Acetate A5 Butoxy Ethyl Acetate A6 Methoxy Propyl Acetate A7 Ethoxy Ethyl Propionate A100 Aromatic 100 Solvent A150 Aromatic 150 Solvent B n-Butyl Alcohol B1 Isobutyl Alcohol B2 Sec-Butyl Alcohol D Isopropyl Alcohol E Ethyl Alcohol E1 Parachlorobenzotrifluoride E2 t-Butyl Acetate EB Ethyl Benzene G Glycols and Glycol Ethers G2 Propoxy Propanol G3 Propylene Glycol Monomethyl Ether G4 2-Butoxy Ethanol G5 Diethylene Glycol n-Butyl Ether G8 Dipropylene Glycol Dimethyl Ether IBIB Isobutyl Isobutyrate K1 Methyl Ethyl Ketone K2 Methyl Isobutyl Ketone K3 Methyl n-Propyl Ketone K4 Methyl Amyl Ketone K6 Cyclohexanone M Mineral Spirits MO Oderless Mineral Spirits NMP N-Methyl-2-Pyrrolidone T Toluene V VM&P Naphtha W Water X Xylene For more information on Reichhold’s complete line of products contact your Reichhold sales representative or call the Coatings Technical Support Line at (800) 431-1920.

Reichhold, Inc. World Headquarters and Technology Center P.O. Box 13582 Research Triangle Park, NC 27709 (919) 990-7500 (local) or (800) 431-1920 (toll-free) www.reichhold.com

The information herein is general information designed to assist customers in determining whether our products are suitable for their applications. Our products are intended for sale to industrial and commercial customers. We require customers to inspect and test our products before use and to satisfy themselves as to contents and suitability for their specifi c applications. We warrant that our products will meet our written specifi cations. Nothing herein shall constitute any other warranty express or implied, including any warranty of merchantability or fi tness for a particular purpose, nor is any protection from any law or patent to be inferred. All patent rights are reserved. The exclusive remedy for all proven claims is limited to replacement of our materials, and in no event shall we be liable for special, incidental, or consequential damages. Reproduction of all or any part is prohibited except by permission of authorized Reichhold personnel.

Copyright © 2012 Reichhold, Inc.