M M27 Français 171-T . 19 JAN 2018 JAN 19 410A 410-AB 151-T m HAND Plain Brass. Plain 404-B STUD PUNCH For 608 and 609 Sockets #12 x 5/8" co Nickel on Brass. . For attaching stud Wood Screw. Wood (Steel Screw.) (Steel No. 410 or No. 412. Contact Us Contact CLINCH PLATE CLINCH Nickel on Brass.

for Studs 882D, 852D, 953D. and 952D,

844A 169-E WASHER

Use with stud No. 844. . w Punch for 410 and 412, also 895 Studs. HAND PUNCHES HAND ww

412-B 844 HAND SCREW DRIVER SCREW HAND 0 STUD clinch type. Plain Brass. Plain 412 STUD 412 Full Spaenaur Catalog Spaenaur Full Nickel on Brass. STUD Single, eyelet Single, type. Brass. Tubular. Double, two prong, #7 x 5/8" 404-CS Wood Screw. Wood (Steel Screw.) (Steel PKG QTY. 1 (ALL TOOLS ON THIS PAGE) TOOLS 1 (ALL PKG QTY. Nickel on Brass. Supplied in FinishNickel Only PKG QTY. 100 (ALL FASTENERS ON THIS PAGE) FASTENERS (ALL 100 PKG QTY. Fermoirs à pression / Passe-fils / Outils d'installation à pression / Passe-fils Fermoirs 295A 1-888-252-638

PLATE : CLINCH F Snap Fasteners / Grommets / Installation Tools / Installation / Grommets Fasteners Snap Use with stud Brass. 895. No.

Spaenaur Home Spaenaur 2 410-B 450-T clinch type. All rights rights All reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Tous droits réservés. réservés. Le catalogue droits sans en tout ou en partie, ne peut être reproduit, l’autorisation de Spaenaur Inc. écrite Tous Plain Brass. Plain 410 STUD 410 Nickel on Brass. Single, two prong, 895 STUD 420, 420B Eyelets. Screw. Punch for 400, 400B, 852-D STUD #8 x 5/8" Single, clinch Single, type. Brass. STUD Brass Wood Brass Single, large 402-CS 1-800-265-877

hexagon base. hexagon 402-CSB Plain Brass. Plain : P Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. of this TC3 at the back TC2 and and on page at Spaenaur.com of Use available and Conditions Terms to Catalog Subject © 2018 Spaenaur Inc. © 2018 Spaenaur Inc. catalogue. de ce TC5 in à la TC4 et page et à la Spaenaur.com sur du Catalogue disponibles d’utilisation Conditions aux soumise est L’utilisation Nickel on Brass. Double, two screw base. [email protected] 708A PLATE CLINCH For attaching No. 608 or No. 609. Brass. 400A 400AB Plain Brass. Plain WASHER 400 or No. 420. Nickel on Brass. For attaching No. 1-800-265-8772 609 SOCKET Long prong, Brass 9/32". with bronze spring. #8 x 5/8" #8 x 3/8" 952-DL STUD Single, large Steel Screw. Self-Tapping 401-CS hexagon base. hexagon 106-W06-1W ALL STUDS MADE OF BRASS, NICKEL PLATED. Nickel on Brass 420 400 400B 420-B Single, two screw base. EYELET Plain Brass. Plain Plain Brass. Plain

(Not Illustrated) (Not 608 Nickel on Brass. Nickel on Brass. Long prong, 5/16".

Regular 1/4" prongs. SOCKET LIFT-THE-DOT FASTENERS LIFT-THE-DOT “COMMON SENSE” “COMMON FASTENERS SENSE” Regular, 7/32" prongs. Brass with bronze spring. Inch Pouce CCATALOGATALOG 1144 1-800-265-8772 [email protected] Spaenaur Home Full Spaenaur Catalog Contact Us Français

Snap Fasteners / Grommets / Installation Tools Inch Fermoirs à pression / Passe-fils / Outils d'installation Pouce

SNAP FASTENERS Brass — Nickel Plated PKG QTY. 100 ATTACHING TOOLS with 3/8" Arbor ® for 876-830 Hand Press 1/8" .155" See page M26 for Bench Press

1/64" 1/64" 13/64" SPAENAUR 3/32" 1/8" PKG 1/8" No. Fits Fastener QTY. 876-014 106-100 1 27/64" 15/32" 15/32" 15/32" 876-015 106-101 1 106-100 106-101 106-W04-1T 106-W05-1K 876-016 106-W04-1T 1 OPEN FRONT SOCKET STUD EYELET 876-017 106-W05-1K 1

CINCH 3501-T FASTENING TOOL

PKG QTY. 1 (64C socket is no longer available.)

VELTREX — Vintage type CARPET FASTENERS

Socket is fastened to carpet by means of a pronged ring. When attached, ring is con- cealed in nap of carpet. Will not bend or break 106-W15-1N 106-195 under pressure of stepping on fastener. Socket Pronged Ring

PKG QTY. 100 See M24 for Snap Fasteners Brass — Black Nickel Finish

SPAENAUR No. 192-T SPAENAUR No. 9902-T BENCH CHUCK DIE HOLDER For 3/8" Shank Dia. Upper Die. LOWER DIE HOLDER M TOOLS For 3/8" Shank Dia. Dies PKG QTY. 1 (ALL ITEMS ON THIS PAGE)

For Installation Tool & Dies see Page M26

Snap Fastener Dies 4 SPAENAUR

No. ALOG 1

CAP SOCKET STUD EYELET AT CATALOG 14 C CATALOG (Bottom) (Top) (Top) (Bottom) 876-830 SPAENAUR SPAENAUR SPAENAUR SPAENAUR No. No. No. No. 876-831 876-832 876-833 876-834

© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to CatalogP: 1- Terms800 and- Conditions265-877 of Use 2available F: at1- Spaenaur.com888-252-638 and on page TC20 and ww TC3 wat the. back of this catalog. .com M28 © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue. 19 JAN 2018 M M29 Français 19 JAN 2018 JAN 19 m co 0 1 2 . 0 1 00 Contact Us Contact

U.S.A. Patent 0-221126 U.S.A. Patent

. Strong aluminum body. Strong 3-1/8" throat clearance. 5-1/2") (O/A Lgth. 12", O/A Width for Adjustable stroke clinching. positive die-set All-Steel, basic included. Plunger Only Plunger Handle Lever Compression Spring Bolt & Nut Bolt Adjusting Frame Only Die Set Size Die Set Size w 876-224 876-225 876-226 876-227 876-228 876-229 Installs SNAPS and Installs SNAPS quickly in GROMMETS upholstery, auto tops, boat covers, tents, tarps, etc. canvas, ww

0 Sheet Brass Grommets Full Spaenaur Catalog Spaenaur Full Spur Type Brass Grommets 876-1551 876-232 876-233 876-234 876-235 876-236 876-237 Two-Piece Die-Sets, for setting Two piece Die-Sets, for setting Tool parts list for Pres-N-Snap Snap Fastener / Grommet Installation Tool Installation / Grommet Fastener Snap Fermoir à pression / Outils d'installation de passe-fils pression / Outils Fermoir à A "No Nonsense" Tool at last — built to last! 1-888-252-638

: F

Spaenaur Home Spaenaur 2 All rights rights All reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Tous droits réservés. réservés. Le catalogue droits sans en tout ou en partie, ne peut être reproduit, l’autorisation de Spaenaur Inc. écrite Tous 1-800-265-877

: P Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. of this TC3 at the back TC2 and and on page at Spaenaur.com of Use available and Conditions Terms to Catalog Subject © 2018 Spaenaur Inc. © 2018 Spaenaur Inc. catalogue. de ce TC5 in à la TC4 et page et à la Spaenaur.com sur du Catalogue disponibles d’utilisation Conditions aux soumise est L’utilisation 24 Line. [email protected] PKG QTY. 1 (ALL DIES AND PARTS ON THIS PAGE) PARTS AND DIES 1 (ALL PKG QTY. with O.D. of 9/32", with O.D.

r fo 876-222 Die for Nos. 550-A, B & C Snap Fastener Eyelets 876-223 Die for 550-S Snap Fastener Stud 876-230 Rubber Retainer used with Die Nos. 876-221 and 876-222 PKG QTY. 1 PKG QTY. 1-800-265-8772 876-221 Die for No. 670-D Cap Fastener Snap 876-1554 Die for No. 548-D Snap Socket. Fastener 876-220 Snap Fasteners, Brass Grommets, Brass SETTING TOOL SETTING setting sheet Brass Grommets.) (Includes 1 each of Die Nos. 876-221,

PRES-N-SNAP

Pull-the-Dot Pull-the-Dot Fasteners Speedy Speedy Rivets

876-222, 876-223 and 876-1554 for setting Snap 876-222, 876-223 and 876-1554 for setting Fasteners, plus one two-piece die set 876-226 for Fasteners, plus one two-piece die set 876-226 Inch Pouce CCATALOGATALOG 1144 M 19JAN 2018 M30 Passe-fils etrondellesdelaiton/aluminiumOutils Brass /AluminumGrommets&Washers / Tools *Nickel Plated Finish SPAENAUR 7363 7350 7349 7348 7347-N 7347 7346-N 7346 116-A10-1T 7345 7344-N 7344-GB 7344 Plain Stamped WITH SPURWASHERS ROLLED RIMBRASSGROMMETS SPAENAUR (WITH STEELWASHERS) BRASS VENTILATORGROMMETS SHEET BRASSGROMMETSWITHWASHERS 116-A06-1C SPAENAUR Brass B-1299A *7372-N No 7376 7375 7374 7373 7372 7377 7371 7370 7378 No No . . .

Furnished in “PACKAGES” only “PACKAGES” in Furnished L’utilisation est soumise aux Conditions d’utilisation disponibles duCatalogue sur Spaenaur.com etàla page et TC4 àla inTC5 de ce catalogue. Inc. © 2018Spaenaur Subject toCatalog Terms andConditions available ofUse atSpaenaur.com and onpage and TC2 atthebackTC3 ofthis catalog. Inc. © 2018Spaenaur

o oeDa iihQTY. Finish HoleDia. No. 031"Nce ltd144 Nickel Plated 3/16" 00 031"BakOie144 Black Oxide 3/16" 00 031"PanBas144 PlainBrass 3/16" 00 31"PanBas144 144 144 PlainBrass 144 PlainBrass 144 13/16" 144 PlainBrass 9/16" PlainBrass Nickel Plated 6 15/32" 144 144 13/32" PlainBrass 5 3/8" 4 144 144 Nickel Plated 3 3/8" PlainBrass 2 5/16" Nickel Plated 2 5/16" PlainBrass 1 1/4" 1 1/4" 0 0 ieHl i.PKG HoleDia. Size o hnStQTY. Set When No. P 11"144 11/16" 5 /"144 5/8" 4 53"144 144 15/32" 7/16" 3 2 /"144 3/8" 1 /6 144 7/16" 2 /"144 7/8" 6 /6 144 5/16" 0 51"144 15/16" 7 "144 1" 8 : imtrOD QTY. O.D. Diameter

1- /6 /"144 3/4" 9/16" /"1 100 1" 3/4" oeTpPKG Top Hole 800 Tousécrite Inc. deSpaenaur l’autorisationne peut êtrereproduit, entoutoupartie, sans droitsLe catalogue réservés. 1-800-265-8772 Inc.of Spaenaur permissionthe written part, without orinwhole in be reproduced, not may Catalog reserved. All rights (Approx.) - ).x orp p A( eziS 265-877 116-A05-1Y 116-302 Flat Flange 2

Style F :

1- [email protected] 888-252-638 PKG QTY. PKG 100 ALUMINUM PKG rme 7/32" 0 Grommet SPAENAUR No. SPAENAUR No. SPAENAUR No. SPAENAUR SPAENAUR No. SPAENAUR No. SPAENAUR No. SPAENAUR ahr07/32" 0 Washer 1-0-M116-203 116-A01-1M 1-0-X116-A07-1N 116-A02-1X RME WASHER GROMMET RME WASHER GROMMET 1616*116-226 *116-126 1-3 116-230 116-130 1-2 116-229 116-129 1-2 116-227 116-225 116-127 116-125 1-2 116-223 116-123 1-3 116-232 116-132 1-2 116-221 116-121 1-3 116-234 116-134 1-3 116-236 116-136 COMPONENTS NYONLY ONLY NYONLY ONLY SEPARATE COMPONENTS S.B. GROMMETS&WASHERS SEPARATE RME WASHER GROMMET PEARSPAENAUR SPAENAUR 1-0 116-206 116-106 1-2 116-220 116-219 116-217 116-120 116-213 116-119 116-212 116-117 116-113 116-210 116-211 116-112 116-209 116-A04-1P 116-110 116-207 116-A09-1K 116-109 116-A08-1T 116-107 1-0G 116-205GB 116-105GB 1-0-A116-205 116-A03-1A SEPARATE COMPONENTS NYONLY ONLY 0 No

ww . SPUR-TYPE SETTING TOOLS: HandCutter&Dies For No.116-A06-1C w . SpaenaurHome T-201

No .

.co QTY. QTY. QTY. PKG PKG PKG 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 m FullSpaenaur Catalog O RME RMESGROMMETS GROMMETS FOR GROMMET 876-830 HandPressonpageM26). any press which accepts 3/8" shank dia. (e.g. S Dies have Dies Dies). SPAENAUR No. SPAENAUR 1 SET 1 1 SET 1 old in complete sets only QTY. QTY. PKG PKG FOR SHEETBRASSGROMMETS IEN.DESTN.DIESETNo. DIESETNo. SIZE No. FOR BRASSSPURGROMMETS Drop ForgedSteel-Side-type 00 M-93 M-38 M-37 M-36 M-35 M-34 M-33 M-32 M-31 M-30 M-29 5 4 3 2 1 0 GROMMETING DIESFOR Use awoodmalletwith 3/8" SHANK DIAMETER SHANK 3/8" SPAENAUR SPAENAUR USE INPRESSES INSERTING DIES INSERTING DIES 6-GT 5-GT 4-GT 3-GT 2-GT 1-GT 876-1778 876-1777 HOLE CUTTERS HOLE all diesandcutters. M-48 M-47 M-46 M-45 M-44 M-43 M-42 M-41 M-40 PKG QTY.PKG SET 1 No No HE RS Spur-type BRASS SHEET . . PKG QTY.PKG 1 7-4 - 876-549 ieN.Hole Dia. Size No. -2 876-542 876-541 876-540 876-539 T-223 876-538 T-222 876-537 T-221 T-220 T-219 T-218 ContactUs Fo 03/16" 00 r 1" 7/8" 3/4" 5/8" 8 1/2" 7 7/16" 6 3/8" 5 9/32" 4 1/4" 3 2 1 0 1-1/4" - ieGrommet Size ieGrommet Size o HoleDia. No. o HoleDia. No. 03/16" 00 13/16" 9/16" 15/32" 6 13/32" 5 3/8" 4 5/16" 3 1/4" 2 1 0 1" 15/16" 7/8" 8 11/16" 7 5/8" 6 15/32" 5 7/16" 4 3/8" 3 5/16" 2 1 0 (Top and Bottom (Approx.) (Approx.) Français Fo r to fit to Pouce Inch

CCATALOGATALOG 1144