DOCSLIB.ORG

Cord Buckles Center-Release Spaenaur Home Spaenaur 2 All Rights Rights All Reserved

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Cord Buckles Center-Release Spaenaur Home Spaenaur 2 All Rights Rights All Reserved 1-800-265-8772 [email protected] Spaenaur Home Full Spaenaur Catalog Contact Us Français Metric Center-Release Buckles / Cord Locks & Cord Ends Métrique Boucles à dégagement central / Autobloqueurs et embouts de cordon EXTRA STRONG CLIP BUCKLE (Clip and Hold) Suitable for webbings of Terylene, Nylon, etc. Special protection against accidental opening. Used on Life-Saving Jackets, heavy Rucksacks, etc. 86 mm 122-A01-1M. Suitable for 40 mm strap of 1.4 - 1.5 mm thickness. The surface of the strap should not be too smooth. Mounting without sewing or rivets. Insert the strap in the clip and holder to the desired length. The Clip Buckle remains in position whether the strap is in use or not, but is nevertheless adjustable. Adjust the position by pushing the outer part of the strap inwards in order to release the strap. The loose end is hidden by the outer 122-A01-1M part of the strap. SPAENAUR Strap Strap PKG No. Colour Width Thickness QTY. 122-A01-1M Black 40 mm 1.4 to 1.5 mm 10 M All CORD BUCKLE Buckles Holder and locking wheel have supplied separately. White Locking Used for bags and clothing. E.g. ruck- Wheel sacks, duffel bags, laundry bags, CATALOG 14 C CATALOG AT sleeping bag covers, anoraks, ALOG 1 swimming trunks, sou’westers. 4 SPAENAUR No. For Cord Size WHITE BLACK PKG QTY. 25 2 mm 122-652 122-655 3-4 mm 122-660 122-663 MOUNTING: After threading the cord through the holder, push in the locking wheel. Knot the ends of the cord. © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. SubjectP: 1-800-265-877 to Catalog Terms and Conditions2 ofF :Use 1-888-252-638 available at Spaenaur.com and0 on pageww TC2w and. TC3 at the back of this catalog. .com © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. M19 L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue. 19 JAN 2018 1-800-265-8772 [email protected] Spaenaur Home Full Spaenaur Catalog Contact Us Français Inch Looploc™ / Cord-Lok® / Marine Fastener Assortment Pouce LooplocMC / Cord-Lok® / Assortiment de fixations marines TM *3/4" Looploc Other sizes and colours Ideal for holding straps or webbing where available subject to 1/4" no adjustment is needed. minimum order. Rounded edges will not gouge or scratch. 1", 1-1/4", 1-1/2" and 2". SPAENAUR No. 122-671 Material: Acetal Colour: Black PKG QTY. 50 T-PLASTECH CORD-LOK® Size: MINI The Cord-Lok® from T-PlasTech is one of the most popular spring-loaded cord closures available. It's been 1" proven in hundreds of applications, ranging from casual apparel to expedition-quality outdoor gear. ■ Pre-assembled. ■ Stainless steel spring. ■ Remains assembled even when cords are removed. SPAENAUR Cord No. Colour Diameter Material: ABS 122-692 Black For 1/4" 122-693 White For 1/4" PKG QTY. 25 Anti-Corrosive ASSORTMENT ASSORTIMENT 805-499A “MARINE” FASTENERS 19 VARIETIES — 636 PIECES Furnished in LARGE SIZE, grey enamelled Steel Drawer with scooped bins. Drawer will fit into the Slide Racks shown on page A3 Shipping weight: 3.52 kg (7-3/4 lbs.) Contains most popular fastener items for Canvas Covers, Camping Gear, etc. M Cap Drive Tool2 In 1 Anvil Punch Eyelet “Quick-snap” Eyelet Washer “Common Sense” Fastener Stud Tapping Screw Durable Stud Fastener CATALOG 14 C CATALOG AT ALOG 1 4 Machine Screw Hex Nut Lockwasher Cap Socket Stud Eyelet For the complete assortment contents turn to A119 © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. SubjectP: 1-800-265-877 to Catalog Terms and Conditions2 ofF :Use 1-888-252-638 available at Spaenaur.com and0 on pageww TC2w and. TC3 at the back of this catalog. .com © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. M23 L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue. 24 JAN 2018.
Load more

Recommended publications
  • Fastener Identification Guide • 4.13 KM • Printed in the USA
    HEAD STYLES Hex Cap Screw Bugle Hex cap screws feature a washer face on the Button Washer bearing surface, a chamfered point, and tighter body tolerances than hex bolts. Pan Binding Undercut Hex Bolt Similar to hex cap screw, hex bolts do not require a washer face or a pointed end and have a greater tolerance range in the body. Round Head Fillister Socket Head Cap Screw Socket heads feature an internal hexagonal drive DRIVES socket and close tolerances for precision assembly. Flat 82° Cross Recess Button Head Socket Cap Screw Type I FASTENER (Phillips) Button heads feature a dome shaped head, though Flat 100° this feature reduces the tensile capacity. Cross Recess Flat Head Socket Cap Screw Type IA Flat heads feature an 82° countersunk head for Flat Undercut (Pozidriv®) IDENTIFICATION flush connections. Like the button heads, this feature reduces the tensile capacity. Cross Recess Type II (Frearson) Low Head Socket Cap Screw Indented Hex Low heads are similar to standard socket heads, but with a shorter head for applications where clearance Cross Recess Square GUIDE is an issue. This head configuration also reduces the Combo strength capacity. Indented Hex Washer (Quadrex®) NUTS Carriage Bolt A round head bolt with a square neck under the Slotted head. These must be tightened with a nut. Serrated Hex Finished Hex Nuts: Hex Coupling Nuts: Washer Hexagonal shaped nuts with internal screw Designed to join two externally threaded Plow Bolt threads. Finished hex nuts are one of the most objects, usually threaded rod, together. Combination Similar to a carriage bolt, these have a flat head common nuts used.
    [Show full text]
  • Stainless Steel Fasteners – a Systematic Approach to Their Selection
    STAINLESS STEEL FASTENERS – A SYSTEMATIC APPROACH TO THEIR SELECTION A DESIGNERS’ HANDBOOK SERIES NO 9003 Produced by Distributed by AMERICAN IRON NICKEL AND STEEL INSTITUTE INSTITUTE STAINLESS STEEL FASTENERS – A SYSTEMATIC APPROACH TO THEIR SELECTION A DESIGNERS’ HANDBOOK SERIES NO 9003 Originally, this handbook was published in 1976 by the Committee of Stainless Steel Producers, American Iron and Steel Institute. The Nickel Institute republished the handbook in 2020. Despite the age of this publication the information herein is considered to be generally valid. Material presented in the handbook has been prepared for the general information of the reader and should not be used or relied on for specific applications without first securing competent advice. The Nickel Institute, the American Iron and Steel Institute, their members, staff and consultants do not represent or warrant its suitability for any general or specific use and assume no liability or responsibility of any kind in connection with the information herein. Nickel Institute [email protected] www.nickelinstitute.org CONTENTS Introduction ................................................3 Fastener Materials ..........................................3 Stainless Steels Identification ................................5 Choosing the Right Type .....................................8 Stainless Steel Fastener Properties ...........................13 Tensile & Yield Strength Shear Strength High- and Low-Temperature Service ..........................16 Magnetic and
    [Show full text]
  • Self-Clinching Nuts Install Permanently in Aluminum, Steel Or Stainless Steel Sheets
    PEM® brand self-clinching nuts install permanently in aluminum, steel or stainless steel sheets. CL™ SELF-CLINCHING NUTS SELF-CLINCHING NUTS Self-clinching nuts are installed by placing them in properly sized holes in sheets and applying a parallel squeezing force to the head of the nut. The sheet metal surrounding the head cold flows into an undercut thereby making the fastener an integral part of the sheet. A serrated clinching ring prevents the fastener from rotating after installation. S™/SS™/CLA™/CLS™/CLSS™ nuts H™ (non-locking) and HNL™ (locking) provide load-bearing threads in thin nuts have threads that provide high sheets with high pushout and torque-out pushout and torque-out resistance - resistance - PAGES 4 and 5 PAGE 8 SP™, PEM 300® nuts provide strong SH™ hard panel nuts install into thin, load-bearing threads in stainless steel harder, high strength steel materials - sheets as thin as .030”/0.8 mm - PAGE 8 PAGES 4 and 5 SMPS™/SMPP™ nuts are for thinner PEM RT® free-running locknuts are sheet/close-to-edge applications - free-running until clamp load is induced. A PAGE 9 modified thread angle on the loaded flank provides the vibration resistant locking Material and finish specifications - PAGE 9 feature- PAGE 6 SL™ self-locking nuts are designed with Installation - PAGES 10 and 11 a unique and economical TRI-DENT® locking feature, meeting 3 cycle locking Performance data - PAGES 12 - 15 performance requirements - PAGE 7 Many PEM self-clinching nuts in this bulletin are dimensionally equivalent to nuts manufactured to NASM45938/1 specifications. Consult our Marketing department for a complete Military Specifications and National Aerospace Standards guide (Bulletin NASM) on our website.
    [Show full text]
  • Fastener Guide
    Experts in supplying Vendor Managed fasteners and industrial Inventory Programs products to manufacturers and sub-contract On-Site Parts assemblers. Kitting Department 763.535.0400 763.535.0400 Table of Contents Standard Fasteners.................................................................. 3 Hex Bolt Sizes and Thread Pitches Size Chart.............................................................. 4 Standard US Machine Screw Size Chart....................................................................... 7 Sheet Metal Screw Size Chart....................................................................................... 8 Shoulder Bolt Size Chart................................................................................................ 9 Socket Button Head Size Chart.................................................................................... 11 Socket Cap Size Chart................................................................................................. 12 Socket Flat Head Size Chart........................................................................................ 15 US Nuts Size Chart...................................................................................................... 17 SAE Flat Washer Size Chart........................................................................................ 20 USS Flat Washer Size Chart........................................................................................ 21 Screw Eye Size Chart.................................................................................................
    [Show full text]
  • Mechanical Assembly
    MECHANICAL ASSEMBLY •Threaded Fasteners •Rivets and Eyelets •Assembly Methods Based on Interference Fits •Other Mechanical Fastening Methods •Molding Inserts and Integral Fasteners •Design for Assembly ©2002 John Wiley & Sons, Inc. M. P. Groover, “Fundamentals of Modern Manufacturing 2/e” Mechanical Assembly Defined Use of various fastening methods to mechanically attach two or more parts together •In most cases, discrete hardware components, called fasteners, are added to the parts during assembly •In other cases, fastening involves shaping or reshaping of a component, and no separate fasteners are required ©2002 John Wiley & Sons, Inc. M. P. Groover, “Fundamentals of Modern Manufacturing 2/e” Products of Mechanical Assembly •Many consumer products are assembled largely by mechanical fastening methods Examples: automobiles, large and small appliances, telephones •Many capital goods products are assembled using mechanical fastening methods Examples: commercial airplanes, trucks, railway locomotives and cars, machine tools ©2002 John Wiley & Sons, Inc. M. P. Groover, “Fundamentals of Modern Manufacturing 2/e” Two Major Classes of Mechanical Assembly 1. Methods that allow for disassembly Example: threaded fasteners 2. Methods that create a permanent joint Example: rivets ©2002 John Wiley & Sons, Inc. M. P. Groover, “Fundamentals of Modern Manufacturing 2/e” Reasons Why Mechanical Assembly is Often Preferred Over Other Methods •Ease of assembly –can be accomplished with relative ease by unskilled workers using a minimum of special tooling and in a relatively short time •Ease of disassembly –at least for the methods that permit disassembly Some disassembly is required for most products so maintenance and repair can be performed ©2002 John Wiley & Sons, Inc. M. P.
    [Show full text]
  • Sensorsnaps: Integrating Wireless Sensor Nodes Into Fabric Snap Fasteners for Textile Interfaces. Proc of UIST'19
    SensorSnaps: Integrating Wireless Sensor Nodes into Fabric Snap Fasteners for Textile Interfaces Artem Dementyev Tomás Vega Gálvez Alex Olwal MIT Media Lab MIT Media Lab Google Inc. Cambridge, MA Cambridge, MA Mountain View, CA [email protected] [email protected] [email protected] ABSTRACT Adding electronics to textiles can be time-consuming and A B requires technical expertise. We introduce SensorSnaps, low- power wireless sensor nodes that seamlessly integrate into caps of fabric snap fasteners. SensorSnaps provide a new technique to quickly and intuitively augment any location on the clothing with sensing capabilities. SensorSnaps securely attach and detach from ubiquitous commercial snap fasteners. Using inertial measurement units, the SensorSnaps detect tap and rotation gestures, as well as track body motion. We optimized the power consumption for SensorSnaps to work continuously for 45 minutes and up to 4 hours in capacitive touch standby mode. We present applications in which the SensorSnaps are used as gestural interfaces for a music player controller, cursor control, and motion tracking suit. The user study showed that SensorSnap could be attached in around 71 seconds, similar C D to attaching off-the-shelf snaps, and participants found the gestures easy to learn and perform. SensorSnaps could allow anyone to effortlessly add sophisticated sensing capacities to ubiquitous snap fasteners. Author Keywords Wireless sensor nodes, wearables, textile interfaces, ubiquitous computing, low-power CCS Concepts Human-centered computing -> Interaction devices; Interac- • tion techniques; User interface design Figure 1. SensorSnaps embed miniaturized electronics into generic snap fasteners, making it possible to augment garments with wireless elec- INTRODUCTION tronics that enable on-device gesture recognition, wireless connectivity, motion tracking with sensor fusion, and touch sensing.
    [Show full text]
  • Tridair Mark IV
    Mark IVTM Structural Panel Fasteners Design and Features The Flat Beam Lock design provides excellent There are other types, styles and sizes available which are resistance to vibration-induced loosening, and has a cycle life not featured in this catalog. Contact us for more details. of up to 1,500 seated cycles. The stud bolts featured are available in .250 and .375 inch nominal diameters. Positive stud bolt retention and hold-outs are available. The receptacle provides .020 inch minimum radial float and versions allow for angular engagement of nut plate to ease installation of curved panels. Receptacle can be replaced without removing rivets. Optional grommet provides hard seat surface, good load transfer, counterbore for retaining ring and is excellent for gasketed applications. Flat Beam Lock Nut Eliminates Shaving Action of Bolt. Typical Mark IV™ Fastening System: (Stud hold-out version shown with angular misalignment capabilities.) UT._ To•IACA()\IOUI CHCCTM: t"TC><i (IIAMt:tu, WIRE FORM FOR STUD BOI.T HOLD-OUT Top View (Sei:tlon.d) RECEPl...CU: Exploded View RElAJN!NG RING '--./--" FQflM-IN·Pl..ACE Rl�El (21'1...ACES) -SU6S�TR UCTURE 33 Mark IV™ Plug Version. Features: Flat Beam Lock design for excellent vibration resistance. Multiple lead thread for quick operation. .250 and .375 inch nominal stud bolt diameters featured. Receptacles allow for radial float. Up to 1,500 seated cycle life locking feature meets and exceeds NASM25027. Accommodates large variations in grip (.140 inch). Stud Bolts CA2104-( )HS. (1/4 size) CA2109-( )HS. (3/8 size) Material: 8740 or 4140 Alloy Steel Ultimate tensile strength: Ultimate tensile strength: .
    [Show full text]
  • Hardware Fastener Study Guide 2019.Indd
    STUDY GUIDE: HARDWARE & FASTENERS Learning Objectives: • The features and benefi ts of the products you sell. • How to answer your customers’ product-related questions. • How to help your customer choose the right products. • How to increase transaction sizes by learning more about add-on sales and upselling techniques. Chapter 1: Fasteners Module 1: Screws Before we get into the diff erent types of screws, let’s take a look at the diff erent types of head styles and drive types. The head style refers to the shape of the head. The drive type refers to the type of driver needed to secure the fastener. Here are the Head Styles: Here are the Drive Types: • Flat • Round • Phillips • Hex • Oval • Hex • Slotted • Star • Pan • Hex Washer • Combination • Square • Truss Product Knowledge: Sheet Metal Screw • This screw fastens thin metal to thin metal. • It is threaded its entire length. • Can have fl at, oval, round or binding heads. • Typical lengths range from 1/8” to 2”. • Starting holes are either drilled or punched and should be slightly smaller than the screw diameter. Machine Screw • Intended to be screwed into pre-threaded holes in metal. • Another type is a Thread-Cutting Machine Screw, which has a head that cuts its own threads as it goes into a hole. • May look like a bolt, but user drives it with a screwdriver instead of a wrench. • Thread is measured in threads per inch, or tpi. Comes in coarse (24 threads per inch) and fi ne (32 threads per inch) sizes. • Can have round, oval, fl at and fi llister heads.
    [Show full text]
  • Fastener Design Manual
    . _- NASA 'Reference Publication 1228 March 1990 Fastener Design Manual Richard T. Barrett . , :. ? . ,' - ' ' - "'".'-*'" _,'" ' "l ......... ' " • ' ¢ ",;L, NASA Reference Publication 1228 1990 Fastener Design Manual Richard T. Barrett Lewis Research Center Cleveland, Ohio National Aeronautics and Space Administration Office of Management Scientific and Technical Information Division ERRATA NASA Reference Publication 1228 Fastener Design Manual Richard T. Barrett March 1990 The manual describes various platings that may be used for corrosion control including cadmium and zinc plating. It does not mention outgassing problems caused by the relatively high vapor pressure of these metals. The fastener manual was intended primarily for aeronautical applica- tions, where outgassing is typically not a concern. Issued June 17, 2008 Summary ........... ..... ............. ..... ..... ..... ................................ ..... ....... ....... ............. 1 Introduction ... .................. .......... ..... ..... ..... ..... ..... .......... ............ ..... ....... ............... 1 General Design Information Fastener Materials .... ........ ..... ..... ..... ..... ...................... .......... ............ ............ ..... .. 1 Platings and Coatings ... ..... ..... .......... ..... ..... ..... ..... ................. ..... ............ .............. 1 Thread Lubricants ... ....................... ...................... .......... ................. ....... ..... ..... .... 4 Corrosion ........ ..... .................. ..... ....
    [Show full text]
  • Catalogue 2019
    Catalogue 2019 Fidlock - the new generation of fasteners Fidlock was founded with the aim of developing easy-to-use and trend-setting magnetic-mechanical fasteners in an appealing design that revolutio- nise even long-established concepts. Our innovative fastener concepts based on the Fidlock concept offer users a new dimension in terms of functi- onality, safety and fun. The great ease of use, ergonomic features as well as classy and robust processing convince users straightaway. In daily use, Fidlock fasteners offer qualities that have never been achieved before: they close automatically and can be opened comfortably with one hand - even when wearing gloves. Users especially appreciate this advantage for sporting activities; it means that they can use their other hand to ensure their own safety. All Fidlock fasteners combine a high level of reliability with the simplest method of opening and closing a fastener. At present, Fidlock offers product developers and designers a large range of innovative magnetic fasteners in eleven product families. This means that they get the right solution for a wide range of application areas and individual design concepts. Thanks to the large selection of different designs and materials as well as opportunities for individualisation, product designers do not have to make any compromises with Fidlock fasteners. Our fastener concepts are not only based on multiple award-winning, unique technology, they also complement and refine our customers‘ products with convincing quality features. In this way, innovative product lines or extra added value is created for our customers. Users are thrilled with the intuitive one-hand-operation, design and secure hold of the Fidlock fasteners - no matter whether they are used on top-quality pieces of furniture, bags, ruck- sacks, helmet or other sport and lifestyle brand items: our fasteners stand for the greatest ease of use, security, fun and function.
    [Show full text]
  • Dowel Pins Selloc Pins Split Pins Pigtail Bolts Tested Eye
    NAME + IMAGE DESCRIPTION DIN MATERIAL THREAD FINISH DOWEL PINS Hardened Steel straight 6325 BLACK / E/G pin SELLOC PINS Slotted spring type straight 1481 BLACK / E/G pin SPLIT PINS Split pin is a metal fastener SPLIT E/G with two legs that are bent apart during installation used to fasten metal together. STRAINING EYE BOLTS This robust and practical 580SB E/G wire straining bolt with an unwelded eye is suitable for tensioning wires PIGTAIL BOLTS Pigtail eyebolts are PIG E/G threaded at one end and the other end is hot worked to form a pigtail eyebolt. TESTED EYE BOLTS Eye bolts and eye nuts are 580T E/G used for lifting machines, appliances or any other objects which cannot be lifted by hand or by fork lift truck. TESTED EYE NUTS Eye nuts are used for lifting 580N E/G machines, appliances or any other objects which cannot be lifted by hand or by fork lift truck. NAME + IMAGE DESCRIPTION DIN MATERIAL THREAD FINISH EXTERNAL CIRCLIPS An External Circlip is a 6796E BLACK fastener that holds components or assemblies onto a shaft when installed in a groove INTERNAL CIRCLIPS An Internal Circlip is a 6796I BLACK fastener that holds components or assemblies in a housing or bore when installed in a groove NAILIN ANCHORS Is a Nail Drive Anchor with NAILIN as plastic / nylon plug used for securing medium to light weight fixings in concrete, concrete blocks, full and half brick surfaces SLEEVE ANCHORS Sleeve anchors are SLE E/Y pre-assembled expanding sleeve anchors for use in all types of solid base materials.
    [Show full text]
  • BANASCH's INC. 603 Brooklyn Ave
    Banasch’s Inc. www.banaschs.com FAMILY OWNED AND OPERATED SINCE 1910 Sewing Supplies, Notions, Sewing Equipment, Irons, Pressing Equipment, Hangers, Poly, Garment Rack, Heat Seal/Mending Tapes and much more! We specialize in providing our customers with quality products and quality service. We strive to be your single source vendor. 603 BROOKLYN AVE. STE. B MILFORD, OH 45150 www.banaschs.com Phone: 513-731-2040 Toll free phone: 800-543-0355 Fax: 513-731-2090 Toll free fax: 866-417-2090 www.banaschs.com Phone: 513-731-2040 Toll free phone: 800-543-0355 Fax: 513-731-2090 Toll free fax: 866-417-2090 Banasch’s is located at 603 Brooklyn Avenue, Suite B, Milford, Ohio 45150. We have been in business since 1910 providing quality products with competitive prices. We strive to be your single source sewing supply and sewing equipment vendor. We proudly staff knowledgeable people with many years of product knowledge and know how in the garment industry. Please don’t hesitate to contact us with any questions on supplies or equipment. How to place an order: Our sales staff and customer service are available Monday thru Friday from 8:30am to 5:30pm EST. We are always happy to take your order over the phone. We can accept your order also via mail, fax, e-mail, e-commerce from our website. Our website address is: www.banaschs.com Please use our order form in our catalog to prepare your order before calling or sending it to us. Our phone numbers are: 513-731-2040 or toll free 800-543-0355 Our fax phone numbers are: 513-731-2090 or toll free fax 866-417-2090 You can e-mail your order to: [email protected] Please be sure to specify the sizes, colors, quantities, style numbers and name or description of item.
    [Show full text]