Catalogue 2014

Contents

Anchoring / Mooring 4

Audio 36

Barbeques 54

Chandlery 62

Cleaners & Polishes 82

Clothing / Shoes / Bags 88

Electrical - BEP 100

Electrical 134

Electronics & Navigation 156

Engine & Outboard Accessories 175

Fishing 198

Fittings & Vents 212

Galley - Fridge - Cookers 231

Hatches/Ports 252

Lights 266

Plumbing/Pumps 288

Safety 314

Seats - Tables 329

Trailer Components 336

Trim Tabs 348

Windscreen Wipers 353

3 Anchoring / Mooring

6. Rocna Anchors 22. Drum Winches 29. Chain & Rope 35. Fenders

RRR / Fisherman Stress Free Mini Free Fall Drum CMP Anchor Chain - DIN766 Hercules Single Eyelet Fender Galvanised Winch Dyneema Polyester Covered Drum Hercules Round Single Eyelet Stainless Steel Stress Free Midi Free Fall Drum Winch Rope Fenders - Red Winch MaXtek Rope / Chain Packages Hercules Fenders - Double Eyelet Stress Free Maxi Free Fall Drum Rope Cutter and Sealer 10. Windlasses Winch Polypropylene Rope Packs Stress Free Mighty Free Fall Drum Maxwell Windlass RC6 500W Winch Maxwell Windlass RC8-6 / RC8-8 MaXtek Drum Winch 600W 30.Anchors & The Nautilus V500 Windlass Shackles Anchor Winch SS 600/900 Anchor Winch SS 900 with 24. Switch Gear Chain Joining Links Capstan Bow Shackles Anchor Winch Vertical SS 600/900 Windlass Wireless Controller & Nylon Thimbles Above Deck Winch 900 Remote MaXtek SS Dee Shackles Anchor Winch SS 1500 Splashproof Windlass Up / Down Dee Shackles Anchor Winch SS 1500 with Switch with On/Off Carver Shackles Capstan Windlass Up / Down Toggle Switch Folding Grapnel Anchors. Universal Foot Switch for Windlass Danforth Anchors 18. Capstans Up & Down Foot Switch for Windlass James Nilsson Rope/Anchor- Circuit Breakers - Switchable 31.Anchors Capstan C400 Heavy Duty Solenoid - 3 Wire Swivesl & James Nilsson Rope/Anchor- Motors Capstan HSC400 Heavy Duty Solenoid - 2 Wire Straighteners James Nilsson Rope/Anchor- Motors Capstan CH400 Kong Anchor Swivel - 12/13/14mm James Nilsson Rope/Anchor- Kong Anchor Swivel - 8/10/12mm Capstan C800 26. Bow Rollers

James Nilsson Rope/Anchor- Kong Anchor Swivel - 6/7/8mm Self Launching Bow Roller - 950mm Capstan C1600 Anchor Swivels CAN Whale Self Launching Bow James Nilsson Utility/Furling Anchor Straightener Galvanised & Roller Capstan - CF1200 Stainless Steel Self Launching Bow Roller -750mm James Nilsson Utility/Furling Hawse Pipe Self Launching Bow Roller -580mm Capstan - CF1900 Self Launching Bow Roller -415mm Stainless Steel Chain Stopper James Nilsson Docking/Mooring Self Launching Bow Roller -400mm Capstan - CD1400 Hinged Bow Roller James Nilsson Docking/Mooring 32. Accessories Hinged Bow Roller with Yoke Capstan - CD2400 Bow Roller Hinged for Self Launch Sea Anchors - Lalizas Bow Roller - Single Roller Sea Anchor Professional Extended Bow Roller Lifebuoy Drogue / Sea Anchor for Bow Roller with guides Horseshoe Bow Roller Dock Wheel Bow Roller Guide - 208mm Mooring Dock Lines Bow Roller Guide - 150mm Rubber Mooring Line Spring Stolts Anchor Roller RP30 Stainless Mooring Spring Stolts Anchor Roller RP444 Lalizas Race Mark Buoy Euroglide 2” Bow Roller Red Kiwi Klaw - Rope Gripper Euroglide 3” Bow Roller Red Kayak Anchor Pack with Winder 3” Bow Roller - Black Rubber Lifebuoy Drogue / Sea Anchor for 3” Bow Roller - Yellow Poly Vinyl Horseshoe 4” Bow Roller - Yellow Poly Vinyl Roller - Black Polypropylene 4

Rocna Anchors - THE NEXT GENERATION IN ANCHORING

Rocna Anchor - RRR / Fisherman

The Rocna Fisherman - Rock and Reef Retrievable.

The shackle rail allows you to retrieve the anchor from the opposite direction if the anchor becomes fouled. NOT for overnight use, limited to sizes 4 kg and 6 kg for this reason.

Part Numbers: ROCNA04RRR - 4 kg ROCNA06RRR- 6 kg

Rocna Anchors - Galvanised

* We Guarantee this is the best anchor you will ever own! * Rapid Set on virtually any ocean floor * Industry Leading holding power (RINA rated SHHP) * Easy to use with auto launch and secure stow

Part Numbers: ROCNA04 - 4 kg \ 9 lbs ROCNA33 - 33 kg \ 73 lbs ROCNA06 - 6 kg \ 13 lbs ROCNA40 - 40 kg \ 88 lbs ROCNA10 - 10 kg \ 22 lbs ROCNA55 - 55kg \ 121 lbs ROCNA15 - 15 kg \ 33 lbs ROCNA70 - 70 kg \ 154 lbs ROCNA20 - 20 kg \ 44 lbs ROCNA110 - 110kg \ 243 lbs ROCNA25 - 25kg \ 55 lbs

Rocna Anchor - Stainless Steel

Rocna’s legendary anchor in Highly Polished Stainless Steel

Part Numbers: ROCSS04 - 4 kg ROCSS33 - 33 kg ROCSS06 - 6 kg ROCSS40 - 40 kg ROCSS10 - 10 kg ROCSS55 - 55kg ROCSS15 - 15 kg ROCSS70 - 70 kg ROCSS20 - 20 kg ROCSS110 - 110kg ROCNA25 - 25kg

6 Rocna Anchors - THE NEXT GENERATION IN ANCHORING

Rocna Anchor - Bottle Opener

Genuine Rocna Bottle Opener!

Very much the same as your Rocna anchor for your boat, but a considerable amount smaller and can even be used to open bottles!

Part Number : ROCNABO

Rocna Story

This new anchor design was developed in 2004 by very well respected designer Peter Smith of Auckland. Peter an avid international yachtsman was dissatisfied with poor performing anchors and decided that there must be a better way. From humble beginnings it began as a solution to his personal requirements, but soon word of mouth spread.

The merits of the Rocna anchor design have become legendary and with it came international success. If you are overnighting a Rocna anchor will let you sleep at night; no matter what the weather throws at you. If you are a fisherman you can be sure that Rocna will hold you on your favourite spot.

* Rocna sets within its length * Rocna anchors dig straight in * Rocna anchors stay put * Rocna offers superior holding-power * Rocna anchors do not have lead or cast iron in the blade

7 Rocna Anchors - THE NEXT GENERATION IN ANCHORING

New Rocna Lifetime Warranty

Rocna Anchors stand behind the product with the best warranty available. The warranty has been expanded to include bending or deformation, in addition to breakage, in a new warranty policy. It applies to the lifetime of the original purchaser when the anchor is sized appropriately for the boat, using Rocna’s sizing recommendations.

Rocna Key Features:

Super-high holding power : Testing demonstrates that a Rocna possesses stopping power vastly superior to equivalent weight plough or claw types in soft sand or mud, due to the large blade area coupled with the blade’s concave shape, which offers the greatest resistance of any form

Instant setting : A Rocna always attains the correct attitude for penetration, and with its combination of chisel tip, roll-bar, and skids, is rapidly buried on most seabeds – typically within one metre (three feet)

Large blade area and chisel blade tip : On a boat weight matters, and in a Rocna anchor every gram of metal is put to use. A large concave surface blade area offers superior holding power, and the chisel-like blade tip easily penetrates weed, grass, and kelp

Roll-stable : A Rocna is not susceptible to sudden “trip out”. Owing to its optimized geometry, it remains embedded, and does not roll out on load reversal or if dragged under extreme load

Ease of use : A Rocna self-launches and locks home on most bow rollers. A tight curve radius between the shank and blade give a positive lock, preventing movement at sea. The slotted shackle attachment point allows single-shackle fixing, and special holes are positioned for a buoyed retrieval line and tandem anchor, if required

Roll-bar : A Rocna’s roll-bar ensures that the anchor will turn itself to the correct attitude for setting, every time. The skid-rails then direct the blade into the seabed. This also eliminates the need for dedicated tip-weight (an inefficiency common in other designs)

Versatility : There is a Rocna to suit your boat, whether she’s a small runabout or a vessel displacing 50 tons. Larger sizes can be custom designed for your vessel (please enquire)

Rugged strength : The heavy-duty construction of a Rocna is attained through clever design and the use of high tensile steel. A Rocna is rock solid with no moving parts, eliminating complex adjustment systems and potentially dangerous failure points

Durable : A hot dip galvanized finish covers the entire surface of every Rocna with protective zinc, including the interior of the hollow roll bar

8 Rocna Anchors - THE NEXT GENERATION IN ANCHORING

Rocna Sizing Guidelines

Unlike other manufacturers, our sizing recommendations are conservative and intended to provide an anchor adequate for use in most/all conditions.

We base our calculations on 50 knots wind, associated surge, and soft moderate holding bottoms into which it is assumed the anchor has set. Adequate scope is assumed. This is far in excess of most manufacturers.

To choose the correctly sized Rocna, match your vessel’s length with the most appropriate displacement range, also bearing in mind conditions of intended use (if in doubt, give preference to the larger anchor model).

1 t = 1,000 kg | * Weights and areas may vary slightly For multi-hulls: use the chart as instructed, then select the model one size larger

9 Windlass -Winches

Maxwell Windlass RC6 - 500W

Low profile model. Powerful and compact windlass. Vertical gearbox and motor in stainless steel. Made for quick installation. The RC6 features Maxwell’s revolutionary, and patented new Wave Design™ chainwheel. Manual free fall with adjustable clutch. Offers long term trouble free operation. With motor/gear underneath deck offer this model has very smooth and silent operation. Works with chain only or rope/chain combination.

Parts above deck are available in highly polished stainless steel 316.

Part Number : MRC6 - 500w Stainless Steel Maxwell’s revolutionary new chainwheel.

Maxwell once again leads the market in innovative thinking with the introduction of their latest Wave Design™ chainwheel. This patented rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/ chain spliced rode. The Wave Design chainwheel is fitted to all RC Series windlasses, designed for anchor rodes with any marine grade chain, G4, BBB, Proof Coil and Metric.

Chainwheel’s unique Wave Design™ action

Maxwell Windlass RC6 Specs

Motor 500 watt Voltage 12 volt Static Hold 700 kg / 1543 lbs Max power pull 350 kg / 770lbs Circuit breaker 70 Amp Drop speed chain 24 m / 78ft Weight 8.5kg - 18lbs Gypsy Options: 7mm DIN 766 Chain 12mm - 1/2” Rope

196 80 145 209 65 39 7 3/4 3 3/16 5 3/4 8 1/4 2 1/2 1 9/16

10 Windlass -Winches

Maxwell Windlass RC8-6 / RC8-8

Low profile model. Powerful and compact windlass. Vertical gearbox and motor in stainless steel. Made for quick installation. The RC8 features Maxwell’s revolutionary, and patented new Wave Design™ chainwheel. Manual free fall with adjustable clutch. Offers long term trouble free operation. With motor/gear underneath deck offer this model has very smooth and silent operation. Works with chain only or rope/chain combination.

Parts above deck are available in highly polished stainless steel 316.

Part Numbers : MRC8-6 Stainless Steel - 600W MRC8-8 Stainless Steel - 1000W Maxwell’s revolutionary new chainwheel. Maxwell once again leads the market in innovative thinking with the introduction of their latest Wave Design™ chainwheel. This patented rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/ chain spliced rode. The Wave Design chainwheel is fitted to all RC Series windlasses, designed for anchor rodes with any marine grade chain, G4, BBB, Proof Coil and Metric.

Chainwheel’s unique Wave Design™ action

Maxwell Windlass RC8-6 Specs RC8-8 Specs RC8 Capstan Version. Available on request.

Motor 600 watt 1000 watt Voltage 12 volt 12 volt Static Hold 1200 kg / 2640 lbs 1200 kg / 2640lbs Max power pull 350 kg / 770lbs 600 kg / 1320lbs Circuit breaker 80 Amp 135 Amp Drop speed chain 28 m / 92ft 32 m / 105ft Weight 12.5kg - 27.5lbs 16.5kg / 36.3lbs Gypsy Options: 6-7mm / 1/4” 8mm / 5/16”

G

RC8-6 1 2 G H I J 210 83 146 156 200 245 383 65 40 66 44 8 5/16 3 5/16 5 3/4 6 3/16 7 7/8 9 5/8 15 2 1/2 1 5/8 2 5/8 1 3/4 RC8-8 1 2 G H I J 210 83 146 156 208 272 410 65 40 66 44 8 5/16 3 5/16 5 3/4 6 3/16 8 1/4 10 3/4 16 1/4 2 1/2 1 5/8 2 5/8 1 3/4 11 Windlass -Winches

Origin of Nautilus

“How can we create a better anchoring system?” This is the question that evolved into a company motto and for Richard Tung and Robert Matos which was the foundation for Nautilus Anchoring Systems. Together, they committed to solve this question for their customers and merge more than 40 years of combined experience into one company that is quickly becoming known as a leader in high quality marine products.

The movement of a nautilus is very similar to the performance of an anchor and windlass. When a nautilus is “sleeping”, its expanded and adhesive tentacles will ensure safe hold onto the reef to prevent floating with the tide. Having a Nautilus Anchoring System on your boat, you will enjoy the most relaxing boating experience freely and safely.

The nautilus’ captivating shell presents one of the finest natural examples of a logarithmic spiral that is related to the golden ratio. In terms of product designs, we focus on every detail from precision to perfection and provide aesthetic value to customers. Nautilus is always thinking about the simultaneous function and appearance one step before you. And we know how much you aspire to have a stylish boat.

You just can’t have an extraordinary boat without a Nautilus Anchoring System.

NAUTILUS - PULLING FOR YOU

12 Windlass -Winches

The Nautilus V500 Windlass

Nautilus says “How can we create a better anchoring system?” This is the question that evolved into a company and created the foundation for Nautilus Anchoring Systems.

On numerous tests the Nautilus V500 Windlass can tackle rope/chain splices and knots with ease without becoming jammed. 2011 IBEX Awarded the deck and Equipment WINNER.

Judge Susan Canfield noted; “The well engineered windlass tension band keeps the rope and chain splice in constant contact with the chain wheel easily handling knots and hackles of life at anchor”

Features:

*16-30ft Boats *Innovative Patented Design *Sleek Robust Construction *Manual free-fall system. *Bright polished and compact design. *Tensioning band keeps rope/chain splice in constant contact with chain wheel for smooth rope to chain transition. *Safety cover design prevents injury to hands and fingers. *Easy access to service and maintain by allowing the windlass top to be removed. *Time saving installation and minimum tools required. *Radius rope stripper allows windlass to use 3 strand or 8 plait braided rope. *Dual purpose clutch handle can tighten clutch and remove cover. *Gearmotor can be installed quickly in tight areas without tools. *Windlass includes clutch handle.

Technical Specifications:

Actual Max Pull: 332 KG Actual Working Load: 83 KG Actual Rope Speed: 33.8 MPM Actual Chain Speed: 34.5 MPM Motor Watts: 500w

Part Number: MTV500

13 Windlass -Winches

Anchor Winch Stainless 600 / 900

Low profile model. Powerful and compact windlass. Vertical shaft in stainless steel and horizontal motor. Highspeed drop of up to 40 m/120 ft. per. min. Manual free fall with adjustable clutch. Offers long term trouble free operation. With motor/gear underneath deck offer this model has very smooth and silent operation. Works with chain only or rope/chain combination.

Parts above deck are available in highly polished stainless steel 316.

Part Number : B912/7 - 900w Stainless Steel

Anchor Winch Stainless 900 with Capstan

Powerful and compact windlass. With capstan for optional warping operation. Vertical shaft in stainless steel and horizontal motor. Highspeed drop of up to 40 m/120 ft. per. min. Manual free fall with adjustable clutch. Offers long term trouble free operation. With motor/gear underneath deck offer this model a very smooth and silent operation. Works with chain only or rope/chain combination.

Parts above deck are available in highly polished stainless steel 316.

Part Number : B912C/7 - 900w Stainless Steel

Anchor Winch Stainless 900 Specs

Motor 600 watt 900 watt Voltage 12 volt 12 volt Max working load 150 kg / 330lbs 220 kg / 484 lbs Max power pull 450 kg / 990lbs 660 kg/1452lbs Current draw 33 Amp 55 Amp Drop speed chain 26 m / 78ft 40 m / 120 ft Weight 9kg - 20lbs 9kg - 20lbs Gypsy Options: 7mm DIN 766 Chain 12mm - 1/2” Rope

14 Windlass -Winches

Anchor Winch Vertical Stainless 600 / 900

Low profile model. Powerful and compact windlass. Vertical gearbox and motor in stainless steel. Made for quick installation. Highspeed drop of up to 25m per/min. Manual free fall with adjustable clutch. Offers long term trouble free operation. With motor/gear underneath deck offer this model has very smooth and silent operation. Works with chain only or rope/chain combination.

Parts above deck are available in highly polished 316 stainless steel.

Part Numbers : BV612/7 - 600w Stainless Steel BV912/7 - 900w Stainless Steel

Vertical Stainless Steel Specs

Motor 600 watt 900 watt Voltage 12 volt 12 volt Max working load 50 kg / 110lbs 80 kg / 176 lbs Max power pull 150 kg / 330lbs 220 kg/484lbs Current draw 60 Amp 80 Amp Drop speed chain 25 m / 78ft 25 m / 120 ft Weight 8.5kg - 18lbs 8.5kg - 18lbs Gypsy Options: 7mm DIN 766 Chain 12mm - 1/2” Rope

Above Deck 900

Anchor Winch 900watt 12 Volt

Heavy Duty Stainless Steel Anchor Winch A perfect choice for boaters with limited space underneath the deck or with thick deck plates because the whole windlass mounts above the boat’s deck. Powerful and compact

Suitable for boats from 15 to 30 ft *(vessel weight also needs to be considered) Works with chain only or rope/chain combination

Part Number : SS912/7 SS912/8 Above Deck 900 Specs Motor 900 watt Voltage 12 volt Max working load 250 kg / 550 lbs Max power pull 750 kg/1650 lbs Current draw 55 Amp Drop speed chain 35 m / 115 ft Weight 13 kg / 29 lbs

Gypsy Options: 7mm DIN 766 Chain 12mm - 1/2” Rope 15 Windlass -Winches

Anchor Winch Stainless 1500

Powerful 1500 watt motor. Low profile model. Vertical shaft in stainless steel. Highspeed drop of up to 40 m/120 ft. per min. Manual free fall with adjustable clutch. Parts above deck in high polished stainless steel 316. Offers long term troublefree operation. With motor/gear under deck offer this model a smooth and silent operation. Works with chain only or rope/chain combination.

Part Number : MC1512/10

Anchor Winch Stainless 1500 with Capstan

Powerful 1500 watt motor. With capstan for optional warping operations. Vertical shaft in stainless steel. Highspeed drop of up to 40 m/120 ft. per min. Manual free fall with adjustable clutch. Parts above deck in high polished stainless steel 316. Offers long term troublefree operation. With motor/gear under deck offer this model a smooth and silent operation.

Works with chain only or rope/chain combination.

Part Number : MC1512C/10

Anchor Winch Stainless 1500 & with Capstan Specs

Motor 1500 watt Voltage 12 or 24 volt Max working load 485 kg/ 1067 lbs Max power pull 1200 kg/ 2640 lbs Current draw 115 or 65 Amp Drop speed chain 40 m / 120 ft Weight 27kg - 60lbs

Gypsy Options: 8mm DIN 766 Chain 14mm - 9/16” Rope

16 Windlass -James Nilsson Capstans

Seawinch Boat Capstans manufactured by James Nilsson Winchmakers

Exclusively distributed by Absolute Marine.

* A range of speeds and power to choose from * New Zealand made - better service * Lower cost - lower maintenance * Safer - will not run back under load * Fit any deck thickness - easily * Install or remove in minutes * High quality European motor

James Nilsson Rope/Anchor Capstan C400

Seawinch C400 Anchor and Pot Hauler Capstan. Powerful 600 watt motor specifically designed for quick anchor and pot hauling recovery. Installed by leading NZ boat builders and proven in NZ conditions for reliability. Auto action roller clutch - will not run back. For boats to 7 metres / 21 feet New Zealand made.

“Steady” pull indicates long run load typical of deep water anchor recovery, pot recovery (for example) . The “Snatch” pull is a maximum momentary pull the winch is capable of.

Pull (KG) Rating Speed (M/min) Current (Amps) Volts DC 36 Steady 24 34 12 110 Short Runs 18 78 12 180 Snatch 15 - 12

Part Number : C400

James Nilsson Capstan Warranty Policy

James Nilsson winches are covered by a three year return to factory warranty against defective materials or workmanship, except motors and seals which are covered by a one year warranty. Warranty does not cover damage due to improper use or poor maintenance. If a fault develops during the warranty period DO NOT remove any parts or attempt a repair. Remove the winch/motor assembly in one piece from the boat and return it to your supplier or the manufacturer with evidence of purchase, a description of the installation and problem experienced.

17 Windlass -James Nilsson Capstans

James Nilsson Rope/Anchor Capstan HSC400

Seawinch HSC400 Anchor and Pot Hauling Capstan. Powerful 600 watt motor specifically designed for high speed anchor and pot hauling recovery. Installed by leading NZ boat builders and proven in NZ conditions for reliability. Auto action roller clutch - will not run back. New Zealand made.

“Steady” pull indicates long run load typical of deep water anchor recovery, pot recovery (for example) . The “Snatch” pull is a maximum momentary pull the winch is capable of. Pull (KG) Rating Speed (M/min) Current (Amps) Volts DC 36 Steady 39 48 12 110 Short Runs 28 105 12 184 Snatch 20 - 12

Part Number : HSC400

James Nilsson Rope/Anchor Capstan CH400

CH400 Foot Mounted Anchor and Pot Hauling Capstan Powerful 400 watt motor specifically designed for quick anchor and pot hauling recovery. Installed by leading NZ boat builders and proven in NZ conditions for reliability. Auto action roller clutch - will not run back. New Zealand made.

“Steady” pull indicates long run load typical of deep water anchor recovery, pot recovery (for example) . The “Snatch” pull is a maximum momentary pull the winch is capable of. Pull (KG) Rating Speed (M/min) Current (Amps) Volts DC N/A N/A 24 15 - 36 Steady 7 36 12 180 Short Runs 6 50 12

Part Number : CH400

18 Windlass -James Nilsson Capstans

James Nilsson Rope/Anchor Capstan C800

Seawinch C800 Anchor and Pot Hauler Capstan. Powerful 600 watt motor specifically designed for quick anchor and pot hauling recovery. Installed by leading NZ boat builders and proven in NZ conditions for reliability. Auto action roller clutch - will not run back. For boats to 11 metres / 36 feet New Zealand made.

“Steady” pull indicates long run load typical of deep water anchor recovery, pot recovery (for example) . The “Snatch” pull is a maximum momentary pull the winch is capable of. Pull (KG) Rating Speed (M/min) Current (Amps) Volts DC 75 Steady 18 54 12 150 Short Runs 13 88 12 365 Snatch 8 - 12

Part Number : C800

James Nilsson Rope/Anchor Capstan C1600

Seawinch C1600 Anchor and Pot Hauler Capstan. Powerful 600 watt motor specifically designed for quick anchor and pot hauling recovery. Installed by leading NZ boat builders and proven in NZ conditions for reliability. For boats to 14 metres / 45 feet New Zealand made. Auto action roller clutch - will not run back.

“Steady” pull indicates long run load typical of deep water anchor recovery, pot recovery (for example) . The “Snatch” pull is a maximum momentary pull the winch is capable of.

Pull (KG) Rating Speed (M/min) Current (Amps) Volts DC 145 Steady 14 78 12 290 Short Runs 11 100 12 725 Snatch 5 - 12

Part Number : C1600

19 Windlass -James Nilsson Utility and Furling Capstans

James Nilsson Utility and Furling Capstan CF1200

Seawinch CF1200 Utility and Furling Capstan For general purpose lifting and hauling where the speed of an anchor capstan is not required

Powerful 1000 watt motor specifically designed for quick anchor and pot hauling recovery.

“Steady” pull indicates long run load typical of deep water anchor recovery, pot recovery (for example) . The “Snatch” pull is a maximum momentary pull the winch is capable of. Pull (KG) Rating Speed (M/min) Current (Amps) Volts DC 110 Steady 11.5 45 12 250 Short Runs 9.5 78 12 550 Snatch 5 - 12

Part Number : CF1200

James Nilsson Utility and Furling Capstan CF1900

Seawinch CF1900 Utility and Furling Capstan For general purpose lifting and hauling where the speed of an anchor capstan is not required

Powerful 1000 watt motor specifically designed for quick anchor and pot hauling recovery.

“Steady” pull indicates long run load typical of deep water anchor recovery, pot recovery (for example) . The “Snatch” pull is a maximum momentary pull the winch is capable of.

Pull (KG) Rating Speed (M/min) Current (Amps) Volts DC 180 Steady 10 74 12 360 Short Runs 9 95 12 900 Snatch 5 - 12

Part Number : CF1900

20 Windlass -James Nilsson Docking and Mooring Capstans

James Nilsson Docking and Mooring Capstan CD1400

Seawinch CD1400 Dooking and Mooring Capstan For low speed, controlled hauling when docking or mooring.

Powerful 600 watt motor specifically designed for quick anchor and pot hauling recovery.

CD1400 Performance “Steady” pull indicates typical run under load up to 20 minutes. The “Snatch” pull is a maximum momentary pull the winch is capable of.

Pull (KG) Rating Speed (M/min) Current (Amps) Volts DC 130 Steady 7 36 12 300 Short Runs 6 50 12 600 Snatch - - 12

Part Number : CD1400

James Nilsson Docking and Mooring Capstan CD2400

Seawinch CD2400 Dooking and Mooring Capstan For low speed, controlled hauling when docking or mooring.

Powerful 1000 watt motor specifically designed for quick anchor and pot hauling recovery.

CD2400 Performance “Steady” pull indicates typical run under load up to 20 minutes. The “Snatch” pull is a maximum momentary pull the winch is capable of.

Pull (KG) Rating Speed (M/min) Current (Amps) Volts DC 235 Steady 9 72 12 475 Short Runs 7.5 95 12 1090 Snatch - - 12

Part Number : CD2400

21 Windlass - Stress Free Drum Winches

Stress Free Mini - 500W

Ideal boat winch for shallow or narrow anchor wells.

An actuator pushes the drum into free fall allowing the anchor to spool off the drum and set quickly. Two models available - N.G .Free Fall and Standard. Suitable for boats from 4 – 6 metres. The motor can be mounted at 30, 45 and 90º to suit the configuration of the anchor well. Constructed from 316 marine grade stainless steel. Maximum lifting capacity 195 kilos (when the drum diameter is small) Holding capacity at anchor is 1800 kilos

Single person operation is achieved with the inclusion of a dual direction solenoid, circuit breaker and up/down toggle switch.

Compact, fully sealed gearbox and powerful Quick permanent magnet motor.

Drum Capacity: Above: Stress Free Mini Free Fall We recommend a maximum of: Drum Winch - 70m of 8mm nylon braid spliced onto 6m of 6mm short link chain - Or 75m 6mm double braid eye spiced to 5m of 8mm nylon and 6m 6mm short link chain.

Part Numbers : SFNGMINI - Stress Free Mini Free Fall Stress Free Mini Drum Winch SFMINI - Stress Free Mini (Standard Model - No Free Fall) (Standard Model - No Free Fall)

Stress Free Midi - 1400W

Ideal boat winch for shallow or narrow anchor wells.

An actuator pushes the drum into free fall allowing the anchor to spool off the drum and set quickly. Suitable for boats from 6 – 7 metres. Two models available - N.G .Free Fall and Standard. The motor can be mounted at 30, 45 and 90º to suit the configuration of the anchor well. Constructed from 316 marine grade stainless steel. Maximum lifting capacity 250 kilos (when the drum diameter is small) Holding capacity at anchor is 1800 kilos

Single person operation is achieved with the inclusion of a dual direction solenoid, circuit breaker and up/down toggle switch.

Compact, fully sealed gearbox and powerful permanent magnet motor.

Drum Capacity: Above: Stress Free Midi Free Fall We recommend a maximum of: Drum Winch - 65 metres of 10mm nylon plus 8 metres of 8mm chain - Or 90 metres of 8mm nylon plus 8 metres of 8mm chain - Or 160 metres of 6mm double braid eye spliced to 5 metres of 8mm nylon and 8 metres of 8mm short link chain.

Part Numbers : SFNGMIDI - Stress Free Midi Free Fall Stress Free Midi Drum Winch SFMIDI - Stress Free Midi (Standard Model - No Free Fall) (Standard Model - No Free Fall)

22 Windlass - Stress Free Drum Winches

Stress Free Maxi - 1400W

Ideal boat winch for shallow or narrow anchor wells.

An actuator pushes the drum into free fall allowing the anchor to spool off the drum and set quickly. Suitable for boats from 7 metres plus. Two models available - N.G .Free Fall and Standard. The motor can be mounted at 30, 45 and 90º to suit the configuration of the anchor well. Constructed from 316 marine grade stainless steel. Maximum lifting capacity 275 kilos (when the drum diameter is small) Holding capacity at anchor is 3600 kilos

Single person operation is achieved with the inclusion of a dual direction solenoid, circuit breaker and up/down toggle switch.

Compact, fully sealed gearbox and powerful permanent magnet motor.

Drum Capacity: We recommend a maximum of: Above: Stress Free Maxi Free Fall - 85 metres of 10mm nylon plus 8 metres of 8mm chain Drum Winch - Or 100 metres of 8mm double braid eye spliced to 5 metres of 10mm nylon and 8 metres of 8mm short link chain.

Part Numbers : SFNGMAXI - Stress Free Maxi Free Fall SFMAXI - Stress Free Maxi (Standard Model - No Free Fall) Stress Free Maxi Drum Winch (Standard Model - No Free Fall)

Stress Free Mighty - 1700W Ideal boat winch for shallow or narrow anchor wells.

An actuator pushes the drum into free fall allowing the anchor to spool off the drum and set quickly. Suitable for boats from 10 metres plus. Two models available - N.G .Free Fall and Standard. The motor can be mounted at 30, 45 and 90º to suit the configuration of the anchor well. Constructed from 316 marine grade stainless steel. Maximum lifting capacity 350 kilos (when the drum diameter is small) Holding capacity at anchor is 3600 kilos

Single person operation is achieved with the inclusion of a dual direction solenoid, circuit breaker and up/down toggle switch.

Compact, fully sealed gearbox and powerful permanent magnet motor.

Drum Capacity: We recommend a maximum of: Above: Stress Free Mighty Free Fall - 170 metres of 8mm nylon plus 8 meters of 8mm shortlink chain Drum Winch - Or 130 metres of 10mm nylon plus 8 meters of 8mm shortlink chain - Or 100 metres of 12mm nylon plus 8 meters of 8mm shortlink chain.

Part Numbers : SFNGMIGHTY - Stress Free Mighty Free Fall SFMIGHTY - Stress Free Mighty (Standard Model - No Free Fall) Stress Free Mighty Drum Winch (Standard Model - No Free Fall)

23 Windlass - Drum Winches

MaXtek Drum Winch

Compact, 12 volt anchor-well mounted drum style anchor winch.

Ideal boat winch for shallow or narrow anchor wells.

The drum, shafts and bearings on these winches, are all manufactured from 316 grade stainless steel. Single person operation is achieved with the inclusion of a dual direction solenoid and remote mounted foot and up/down toggle switch.

Compact, fully sealed gearbox and powerful permanent magnet motor.

Drum Capacity: We recommend a maximum of: - 80m of 8mm nylon braid spliced onto 6m of 6mm shortlink chain - Or 75m 8mm nylon braid spiced on to 10m 6mm shortlink chain

Retrieval rates : Line Speed varies depending on amount of rope wound onto the drum. By example - 25m coiled on the drum and 50m of rope chain warp unwound it will take 2mins and 20sec to fully retrieve.

Part Numbers : MTK600 - (600 Watt) MTK900 - (900 Watt)

Wireless Controller & Remote Up / Down Switch - with Isolator

4 Channel Wireless Controller and Pocket size Remote. Holder Splashproof Windlass switch for all windlasses included.Control your winch and bow thrusters remotely from 12 or 24 Volt anywhere on the boat. Pre-wired with fuse and safety Docking becomes even easier. Bring the boat to the mooring lines by switch. operating the bow thruster when you are on the bow. Seperate sealed isolating switch prevents accidental deployment of Controls: windlass. Windlass - Up / Down BowThruster - Port / Dimensions: 90mm x 57mm Starboard Part Number : 90801 Part Number : 91354

24 Windlass - Switch Gear

Up / Down Toggle Switch Universal Foot Switch for Windlass

Windlass control switch for all windlasses 12 or 24 Volt. Up & Down

Mirror finish Stainless Steel front Windlass foot switch for plate all windlasses. Dimensions: 70mm x 43mm Suitable for both 12 and 24 Part Number : 90800 Volt applications.

To be used in conjunction with a heavy duty solenoid.

Available Black or White

Part Numbers : 90900W (white) 90900B (black) Circuit Breakers - Switchable Deck Foot Switch Circuit breaker sizes from 60 Amp For connecting directly to capstan for uni-directional use. to 175 Amp

Heavy duty switch with Waterproof, Vaporproof, Manual cover. switchable, Surface Mount, Rated at 150 amps Manual Reset. continuous. Dimensions: 100mm with Part Numbers : a 64mm mounting hole 60A 90060 60A 90060-BP (Blister Packed) Part Number : 10098 80A 90080 100A 90100 135A 90135 150A 185150F 175A 90175

Heavy Duty Solenoid - 3 Wire Motors Heavy Duty Solenoid - 2 Wire Motors

Rated for motors: Rated for motors: 12V DC 500-1500 Watt 12V DC 500-1500 Watt 24V DC 500-1500 Watt 24V DC 1500-3000 Watt

~ Quality original parts ~ Quality original parts ~ Designed for motors with 3 ~ Designed for motors with wires only two wires only

Part Numbers : Part Numbers : 90501 - 12 Volt 90503 - 12 Volt 90502 - 24 Volt 90504 - 24 Volt

25 Anchoring - Bow Rollers

CAN Whale Self Launching Bow Roller Self Launching Bow Roller - 950

A well engineered high quality bow roller from CAN. Manufactured High quality bow roller designed universally for easy mounting in Europe the CAN Whale is designed for easy mounting on most on most bows. boats and takes anchors up to 30kgs. Made in 316 stainless steel Made in 316 stainless steel with a low profile design. with a low profile design. Hinged with an inner roller (dual rollers) for Hinged with an inner roller (dual rollers) for self launching self launching operation. operation.

Length: 695 mm x Width: 90mm Length: 940 mm x Width: 100mm Thickness: 5mm Part Number : 90105AM Part Number : MB7204

Self Launching Bow Roller - 750 Self Launching Bow Roller - 580

High quality bow roller designed universally for easy mounting High quality bow roller designed universally for easy mounting on most bows. on most bows. Made in 316 stainless steel with a low profile design. Made in 316 stainless steel with a low profile design. Hinged with an inner roller (dual rollers) for self launching Hinged with an inner roller (dual rollers) for self launching operation. operation.

Length: 740 mm x Width: 90mm Length: 585 mm x Width: 80 mm

Part Number : 90104AM Part Number : 90103AM

Self Launching Bow Roller - 415 Self Launching Bow Roller - 400

High quality bow roller designed universally for easy mounting High quality bow roller designed universally for easy mounting on most bows. on most bows. Made in 316 stainless steel with a low profile design. Made in 316 stainless steel with a low profile design. Hinged with an inner roller (dual rollers) for self launching Hinged with an inner roller (dual rollers) for self launching operation. operation.

Length: 415 mm x Width: 78 mm Length: 400 mm x Width: 77 mm

Part Number : 90102AM Part Number : 90101AM

26 Anchoring - Bow Rollers

Hinged Bow Roller Bow Roller with guides

High quality hinged bow roller designed universally for easy 316 Stainless Steel mounting on most bows. Overall Width: 162mm Made in 316 Inox stainless steel with a low profile design. Roller Size: 55mm wide x 74mm dia Length: 328 mm x Width: 70 mm Part Number : N08 Part Number : 70634

Bow Roller

316 Stainless Steel Overall Width: 58mm Roller Size: Hinged Bow Roller with Yoke 48mm wide x 50mm dia

High quality hinged bow roller designed universally for easy Part Number : N07 mounting on most bows. Made in 304 Inox stainless steel with a low profile design. Large securing hoops provide clearance for anchors with thick shanks.

Length: 355mm x Extended Bow Roller Channel Width: 50mm 316 Stainless Steel Yoke Height: 127mm & Overall Width: 70mm 57mm 170mm long x 64mm wide x 66mm high Mounting Plate 124mm x 55mm Part Number : 90110

Part Number : 90900 Bow Roller Hinged for Self Launch

Stainless Steel Bow Roller Guide - 195mm Two sizes available Roller bracket width: 195mm Part Numbers : Overall width (including bolt and nut): 208mm 56029-01 Mounting: 95 X 60mm Part Number : NS1232

56029-02 Mounting: 125 X 60mm

Bow Roller - Single Roller

Stainless Steel Bow Roller Guide - 150mm Two sizes available Roller bracket width: 150mm Part Numbers : Overall width (including bolt and nut): 195mm 56030-01 Mounting: 95 X 58mm Part Number : NS1232S

56030-02 Mounting: 125 X 58mm

27 Anchoring - Bow Rollers

Stoltz Rollers

Insist on Stoltz Rollers on your boat trailer! Don’t put up with ugly marks on the hull of your boat.

Stoltz Boat Trailer Rollers and Bow Stops are the highest quality poly rollers on the market. MADE IN THE USA and manufactured for long lasting performance and to protect your boat and keep the hull looking new! Stoltz Boat Trailer Rollers use High Quality Materials in production to prevent discoloration, weather cracking, and marking up your boat hull. Stoltz will outlast any other roller. * Guaranteed to outlast any other roller on the market * NEW U.V. stabilised formula * Polyurethane construction offers superior cut and abrasion resistance * Extremely cut resistant * Made in the USA

Anchor Roller RP444 Anchor Roller RP30

100mm width x 75mm width x 80mm diameter 74mm diameter 1/2 inch shaft 1/2 inch shaft

Made of durable Made of durable orange polyurethane orange polyurethane

Part Number : 11021 Part Number : 11020

3” Bow Roller - Black Rubber 3” Bow Roller - Yellow Poly Vinyl

77mm width x 75mm width x 75mm diameter 75mm diameter 1/2 inch shaft Part Number : N21 Part Number : N32

Euroglide 2” Bow Roller Red 4” Bow Roller - Yellow Poly Vinyl

High Strength 100% Polyurethane 100mm width x No bushes required, self 95mm diameter lubricating. 1/2 inch shaft

50mm width x Part Number : N30 50mm diameter 1/2 inch shaft

Part Number : N12 Euroglide 3” Bow Roller Red Roller - Black Polypropylene

High Strength 100% Polyurethane 42mm width x No bushes required, self lubricating. 64mm diameter

71mm width x Part Number : 11907 70mm diameter 5/8 inch shaft

Part Number : N13 28 Anchoring - Chain & Rope

Rope Cutter and Sealer

New Zealand Made

Model 3080RC rope cutter and sealer is fast and efficient. The large blade area - cuts up to 100mm wide. Cuts and seals most synthetic materials. Nylon, rubber, fabric, etc. Webbing, cordage, ropes and tapes.

CMP Anchor Chain - DIN766 Part Number : 3080

CMP Short link Galvanised Chain DIN766

DIN766 chain uses a low carbon steel chain specifically designed for anchoring applications. Hot dip galvanised short link chain, calibrated to latest DIN766 standard. Each link is individually calibrated

Part Numbers : 0556 - 6mm Short link Galvanised Chain DIN766 Dyneema Polyester covered Drum 0557 - 7mm Short link Galvanised Chain DIN766 0558 - 8mm Short link Galvanised Chain DIN766 Winch Rope 0560 - 10 Short link Galvanised Chain DIN766 High performance Dyneema SK75 HMPE core and 100% high Polypropylene Rope Packs tenacity polyester cover.

3 Strand Polypropylene Rope with a High performance rope, high strength rope. Ideal for drum thimble spliced on one end. winch use due to its small diameter and high Note: Not to be used with a strength. windlass. Construction: Double Braid Part Numbers : Cover material: High 0106 = Rope Pack 8mm x 50mm Tenacity Polyester 0107 = Rope Pack 8mm x 70mm Break Load: 1400kg 0108 = Rope Pack 10mm x 50mm Diameter: 6mm 0109 = Rope Pack 10mm x 70mm 0111 = Rope Pack 12mm x 70mm Part Number : DYN6MM

MaXtek Rope / Chain Packs

New MaXtek high quality 8 Plait Braid super soft space saving rope/CMP chain combinations.

Easy and convenient for you to get for your windlass and in 3 popular combinations.

The inner core is special designed to keep the rope round and better grip to avoid slippage in gypsy.

Made with nylon rope, ready to use. Spliced with CMP Din 766 chain. We can also create customised rope and chain packs to suite any application. Please contact us for any enquires on our custom rope/ chain packages.

Part Numbers : RC061012050 - Rope/Chain Package Chain (10m x 6mm) + Rope (50m x 12mm, 8 plait) RC062012050 - Rope/Chain Package Chain (20m x 6mm) + Rope (50m x 12mm, 8 plait) RC062012070 - Rope/Chain Package Chain (20m x 6mm) + Rope (70m x 12mm, 8 plait) RC071012055 - Rope/Chain Package Chain (10m x 7mm) + Rope (55m x 12mm, 8 plait) RC071512070 - Rope/Chain Package Chain (15m x 7mm) + Rope (70m x 12mm, 8 plait) RC072012100 - Rope/Chain Package Chain (20m x 7mm) + Rope (100m x 12mm, 8 plait) 29 Anchoring - Anchors & Shackles

Nylon Thimbles Bow Shackles

Italian Made Made of Galvanised Steel

Size refers to rope diameter Part Numbers : 0655 - 5mm Part Numbers : 0656 - 6mm 0954N - 4mm 0658 - 8mm 0955N - 5mm 0660 - 10mm 0956N - 6mm 0663 - 12mm 0670 - 20mm 0958N - 8mm 0666 - 16mm 0675 - 24mm 0960N - 10mm 0968N - 18mm 0962N - 12mm 0970N - 20mm MaXtek SS Dee Shackles 0964N - 14mm 0972N - 22mm 0966N - 16mm 0974N - 24mm Blister Packed Part Numbers : Chain Joining Links 0750 - 6mm 0751 - 10mm Part Numbers : 0752 - 5mm Long 0557LINK - for 1/4” / 7mm DIN766 0753 - 6mm Long Chain 0754 - 10mm Long

0558LINK - for 5/16” / 8mm DIN766 Chain - Grade L Dee Shackles

Carver Shackles Part Numbers : 0755 - 5mm Counter-sunk slotted shank 0756 - 6mm Made of Galvanised Steel 0758 - 8mm 0760 - 10mm Part Numbers : 0763 - 12mm 0680 - 8mm 0764 - 14mm 0681 - 10mm 0766 - 16mm 0772 - 22mm 0682 - 12mm 0770 - 20mm 0775 - 24mm Danforth Anchors.

Popular low cost anchors for use on dinghys and small vessels. The shank is made of high strength steel and the steel flukes are strong and wide for increased setting power. Moveable shank allows for easy retrieval by driving over the anchor. Galvanised.

Part Numbers : DF1.5 - 1.5kg DF3.0 - 3.0kg DF2.0 - 2.0kg DF4.0 - 4.0kg DF2.5 - 2.5kg DF6.0 - 6.0kg Folding Grapnel Anchors.

Popular anchors for use on dinghys, nets and PWCs. No sharp points when packed awayand made of Galvanised steel.

Part Numbers : 0040 - 0.7 kg 0045 - 6 kg 0041 - 1.5 kg 0046 - 8 kg 0042 - 2.5 kg 0047 - 10 kg 0043 - 3.2 kg 0048 - 15kg 0044 - 4 kg 30 Anchoring - Anchor Swivels & Straighteners

Anchor Swivels Kong Anchor Swivel - 12/13/14mm Part Numbers : Chain 0160 6-8mm Chain (Suits 8kg - 15kg Anchors) The anchor slides perfectly through the ferrule without any problems or damage to the sheaving. The swivel allows the 0161 10-12mm Chain Anchor to straighten up automatically, so that it can correctly (Suits 15kg - 30kg Anchors) position on board the fairlead. 0160-BP 6-8mm Chain (Blister This swivel is for Chain Size: 12-13-14mm Packed) Breaking Strength along axis = 9500kg Breaking strength along major access (side 0162 12-14mm Chain pull) 3000kg Safe Working Load = 3000kg Made from 316 Stainless Steel Anchor Straightener

Part Number : 0165 Designed to twist the anchor and orientate it so that it loads smoothly into the fairlead. Avoids damage and mechanical stress to the windlass.

Kong Anchor Swivel - 8/10/12mm Works with chain from 6mm to 8mm and most anchors that would Chain use that size chain. Also acts as a swivel. Available in Stainless or The anchor slides perfectly through the ferrule without any Galvanised steel. problems or damage to the sheaving. The swivel allows the Anchor to straighten up automatically, so that it can correctly Part Number : ANSTRA068 position on board the fairlead. Part Number : ANSTRA068SS (Stainless Steel) This swivel is for Chain Size: 8-10-12mm Breaking Strength along axis = 5000kg Breaking strength along major access (side pull) 2000kg Safe Working Load = 2000kg Hawse Pipe Made from 316 Stainless Steel Stainless Steel 316 Part Number : 0164 165mm x 84mm

Part Number : 80002 Kong Anchor Swivel - Stainless Steel Chain Stopper 6/7/8mm Chain Can be added to any installation. SS Pin is removable so chain can be The anchor slides perfectly through the ferrule without any inserted into the channel. Simply flip the stop over for free-flow; and problems or damage to the sheaving. The swivel allows the down to lock the chain in place. Anchor to straighten up automatically, so Prevent damage to your windlass by taking the strain. Works with your that it can correctly position on board the bow roller and ensures tension is removed off the windlass at anchor fairlead. by locking the chain.

This swivel is for Chain Size: 6-7-8mm Stainless Steel marine grade components Breaking Strength along axis = 2500kg Suitable for up to 13mm Chain Breaking strength along major access (side *Added security at anchor/mooring pull) 850kg *Easy to operate Safe Working Load = 850kg *Easy to install Made from 316 Stainless Steel Dimensions: Part Number : 0163 98 (Length) x 68 (Width) x 64 (Height)

Part Number : 91404 31 Anchoring / Mooring - Accessories

Sea Anchors - Lalizas

Made of strong coated PVC with continuous webbing inside, for added strength.

Part Numbers : 10071 - Sea Anchor #1 - to 4.5m (15’) 10072 - Sea Anchor #2 - to 6m (20’) 10073 - Sea Anchor #3 - to 7.5m (25’) 10074 - Sea Anchor #4- to 9m (30’) 10075 - Sea Anchor #5 - to 12m (40’)

Sea Anchors - Directions

Use: A Sea anchor, also called a drogue, is an essential part of your boat’s safety equipment. They are used to slow down your boat or liferaft when you are facing strong winds or heavy seas. Moreover they will ensure your boat turns so as to face into or away from the waves. A sea anchor can also be used to keep your boat as stationary as possible and not be affected by the wind, very useful when you are fishing or swimming in waters too deep to anchor. .

Instructions of use : Made of strong-coated PVC, the drogue is open at both ends and includes lines that create two loops at the front and one loop at the end. The sea anchor (drogue) is tied to the boat’s bow (B) with the use of a rope, which should be of at least five (5) times the boat’s length (A).

Tied to the bow of the boat, the rope is passed through the two loops of the drogue’s front lines, creating a tight knot (C). The larger the size of your drogue (larger opening), the bigger its effectiveness will be.

In order to pull the drogue out of the water you should tie a second rope at the end loop of the drogue (D) - pulling this rope will allow the drogue to be pulled out of from the water.

To warn and prevent other boats from running over the ropes of your drogue, you may use a floating buoy (E) that may be tied to the secondary rope. Drogues should never be used for permanent anchorage.

32 Anchoring / Mooring - Accessories

Sea Anchor Professional

Lalizas has designed the Professional Sea Anchor (Drogue) especially for use on large boats and under harsh conditions. The fabric is 200D polyester coated on both sides with 0.45mm PVC.

Lalizas Professional Sea Anchors are immensely strong using 40mm, UV resistant webbing, terminating on a 6mm x 60mm(dia) INOX connecting ring. Lalizas drogues are supplied in a safety yellow colour, packaged in a handy, tough stowage bag.

Part Numbers : 10240 No.1 - for up to 15m (49’) boats 10241 No.2 - for up to 18m (59’) boats 10242 No.3 - for up to 18m (69’) boats

Lifebuoy Drogue / Sea Anchor for Horseshoe

For attachment to lifebuoys to stabilise and slow the drift of a horseshoe lifebuoy. Meets the Yachting NZ requirements

Part Number : 10070

Dock Wheel

Smooth rolling wheel offer substantial dock cushioning and feature moulded-in valves to adjust the level of firmness. Heavy duty hot-dipped galvanized hardware mounts securely to the dock. 302mm wheel use large 50mm diameter axle housing for maximum strength.

Part Number : 1072

33 Anchoring / Mooring - Accessories

Mooring Dock Lines Stainless Mooring

Double braided with loop Spring Polyester, Black coloured 316SS - 410mm (L) Part Numbers (dia x length): 90815 - 8mm x 4m Part Number : 99641 90818 - 10mm x 10m 90819 - 12mm x 6m 90820 - 12mm x 12m 90821 - 14mm x 7m

Rubber Mooring Line Spring

Manufactured from rubber this springer reduces the shock on the mooring lines and protects boat and dock.

Increases the life of dock lines and reduces stress on cleats. Highly elastic rubber buffers the boat from dock line shock loads. Great protection against the stresses of wind and waves while docked.

Part Numbers : 14147-2 - Designed for 3/8” or 10-12mm Rope (435mm long) 14149-2 - Designed for 5/8” to 3/4” or 16-20mm Rope (560mm long)

Lalizas Race Mark Buoy

The Lalizas Race Mark Buoy has been designed especially to meet the demands of races. It features one inflation/deflation valve and one large transparent pocket (69 x 58cm) that can be used for advertising purposes. There are also 4 attachment points for the anchor line and in order to absorb the pulling forces, the lalizas mark buoy is fitted with a special net.

Despite its size, when inflated (height 1.5m, diameter 0.9m), it is very easy to carry. It is made of UV resistant PVC, in bright yellow colour for high visibility.

Part Number : 51030 Kiwi Klaw - Rope Gripper Kayak Anchor Pack with Winder

Hand held v-cleat rope gripper. Suitable for Kayaks, Canoes, Dinghy’s, Jet Ski’s, Small Water Craft and Rope sizes 6-14 mm Boats. Multiple uses: marine, forestry, trucking, building, rigging, rescue. Complete anchoring set up with a 0.7kg grapnel anchor and rope/chain The tension is applied to the rope pack. Made from Tough one piece and its load in a direct straight line Buoyant Plastic from the users shoulder, down through the arm and wrist and onto the load, enabling tension to be safely and evenly applied. Rope/chain pack is made up of 50 metres of 4mm Rope & 2 metres of 6mm Chain Part Number : KiwiKlaw Dimensions: 335mm long x 135mm wide x 15mm deep

Part Number : 50282 34 Anchoring / Mooring - Fenders Hercules Single Eyelet Fender

The Hercules fenders, made from resistant PVC, are ideal for the protection of your boat against damages caused by contact with other boats or the dock.

Dimensions: 95mm (diameter) x 310mm (length)

Part Number : 50591 Hercules Round Single Eyelet Fenders - Red

These fenders are ideal for mooring, anchoring, and fishing marking in heavy seas.

Part Number : Diameter (mm) Length (mm) 51010 300 385 51011 400 520 51013 600 780

Hercules Fenders - Double Eyelet

Lalizas Hercules fenders are manufactured from marine grade PVC and are ideal for the protection of your boat against damage caused by other boats, docks and quays.

They are double eye models, in white with blue end caps. Several Sizes available:

Part Number : Diameter (mm) Length (mm) 50592 130 390 50593 155 520 50594 155 580 50595 200 560 50596 200 620 50597 230 810 Hercules Fenders - Double Eyelet

Hercules PLUS fenders are designed for heavy-duty use, and for use under harsh conditions. As with all LALIZAS fenders, they are constructed by tough, abrasion resistant PVC. The Hercules PLUS fenders have features that strongly reflect the high quality construction standards set by LALIZAS.

The eye (rope hold) and body are moulded in one process, so that the eye cannot be ripped off the rest of the body. Unlike other fenders in the market, the Hercules PLUS fenders have solid, reinforced eyes on the outside and the inside for extra resistance. If you need heavy-duty fenders, then the LALIZAS Hercules PLUS are the ideal for your vessel.

Dimensions: 300mm (diameter) x 1040mm (length)

Part Number : 50665 Hercules Fenders - Double Eyelet

The EasyStore Inflatable fenders are made from reinforced, abrasion resistant PVC material. They are light, simple to use and when deflated can be stowed in small lockers. They can be quickly inflated by using any standard or electric pump and easily mounted using the rope supplied. The EasyStore Inflatable fenders are available in various sizes, and in light grey colour.

Part Numbers : Diameter (mm) Length (mm) 57318 420 1320 57319 600 1500 35 Audio/Visual

38. Marine 44. Speakers & 50. Marine Stereos Covers Televsions

MaXtek FM Stereo MP3/USB/ + Fusion MS-FR702 7”Marine 2-Way RSE LED TV with Sky Card Reader Bluetooth Speakers and DVD (24”or 19”) MaXtek FM Stereo MP3/USB/ + Fusion MS-FR602 6”Marine 2-Way Fusion Marine 22” LED TV with Aux In Speakers DVD Fusion Marine DVD Stereo MS- Fusion MS-FR402 4”Marine 2-Way AV700 Speakers Fusion Marine Stereo for Ipod Sony XSMP1620 6.5” Marine 51. Satellite MS-IP700 2-Way Speakers Fusion Remote Control for 700 Sony XSMP1610 6.5” Marine Dual Receivers Series Cone Speakers Mini HD Box Satellite Receiver Fusion Marine Media Device Dock Lalizas Sea Sound - Two-way Micro Satellite Receiver for -700/200 Series Speakers Freeview Fusion Marine DVD Stereo MS- DNA 4 Way 6 x 9 inch Marine RSE Lockable Swing Arm Bracket AV600 Wakeboard Speakers Fusion Marine Ipod Stereo MS- DNA 3 Way Marine Boxed IP600 Speakers 52. Satellite Fusion Marine CD Stereo MS- Sea Sound - 3 way Speaker Set CD600 Mini Extension Speaker Antennas Fusion Remote Control for 600 Sony Waterproof Car Stereo Cover Series Spray Proof Headunit Cover Ocean 037M Satellite TV Antenna Fusion Marine Dock for Ipod - Stereo Cover Ocean 032M Satellite TV Antenna 600/500 Series SeaWorthy Marine Stereo Cover/ Winegard DS-5 - Crank-Up Enclosure Satellite TV Antenna Fully Enclosed Marine Stereo Case 43. Fusion Marine Amplifiers Fusion Marine 5 Channel Marine Amplifier Fusion Marine Zone Amplifier

36

Marine Audio/Visual- MaXtek Marine Stereos

maXtek FM Stereo MP3/USB/ + Bluetooth

This compact stereo receiver can be mounted anywhere there is water including boats, jetskis, spa pools and outdoor patio barbeque settings.

It’s small circular size makes installation a breeze and will fit into a standard outboard tachometer opening. A solid aluminium chassis, as well as IP-66 and ASTM 117 salt fog ratings make it durable.

*FM Radio *USB Input *All Weather IP66 Faceplate *UV Stable *Fits on driver’s console within a Tachometer Opening *4 x 40 watts output *Solid aluminium waterproof chassis *Auxiliary Input *Bluetooth connectivity

Bluetooth connectivity allows you to play your songs wireless from your Smartphone or iPod.

Ideal for smaller fishing boats, cuddy cabins and jetskis. The MTK020 is also perfect for ATVs, motorcycles, golfcarts and RVs.

Part Number : MTK0020

maXtek FM Stereo MP3/USB/ + AUX In

This compact stereo receiver can be mounted anywhere there is water including boats, jetskis, spa pools and outdoor patio barbeque settings.

Its small circular size makes installation a breeze and will fit into a standard outboard tachometer opening. A solid aluminium chassis, as well as IP-66 and ASTM 117 salt fog ratings make it durable.

*FM Radio *USB Input *All Weather IP66 Faceplate *UV Stable *Fits within a standard engine Tachometer cut-out 76.2mm

*4 x 40 watts output 41.2mm *Solid aluminium waterproof chassis *Auxiliary Input

Ideal for smaller fishing boats, cuddy cabins and jetskis. The MTK012 is also perfect for ATVs, motorcycles, golfcarts and RVs.

Part Number : MTK0012 89mm

38 Marine Audio/Visual- Fusion Marine Stereos

Fusion Marine DVD Stereo MS-AV700

The 700 Series True Marine Entertainment System is the culmination of FUSION’s engineering and design brilliance, resulting in a product with superior sound quality, controls and features never seen before.

Fusion’s new top of the line model features a DVD player for watching movies while out on the boat.

Auxiliary in: yes Display: 2.7” colour TFT LCD Line out: 4 x stereo, 4 x subwoofer Media: AM/FM tuner, VHF receiver, DVD / CD player Power: class-d 70 watts x 4 (max) NMEA 2000 certified - connect to an existing NMEA network for communication with fusion-link devices and fusion nmea 2000 certified wired remote controls. Ethernet ready - advanced wireless control is available with the addition of an all-in-one-DHCP wireless ethernet router via IPad, IPhone or android ‘app’

Connect the optional MS-DKIPUSB Dock for USB, iPod or iPhone music playback.

Part Number : MS-AV700

Fusion Marine Stereo for Ipod MS-IP700

Complete iPod integration & control is provided via a replication of the iPod menu on the stereo display, allowing simple & easy navigation.

Auxiliary in: yes Display: 2.7” colour TFT LCD Line out: 4 x stereo, 4 x subwoofer Media: AM/FM tuner, VHF receiver, internal IPod/IPhone/USB dock Power: class-d 70 watts x 4 (max) NMEA 2000 certified - connect to an existing nmea network for communication with fusion-link devices and fusion NMEA 2000 certified wired remote controls. Ethernet ready - advanced wireless control is available with the addition of an all-in-one-DHCP wireless ethernet router via IPad, IPhone or android ‘app’

Connect the optional MS-DKIPUSB Dock for an xtra USB, IPod or IPhone music playback.

Part Number : MS-IP700

39 Marine Audio/Visual- Fusion Marine Stereos

Fusion Remote Control for 700 Series

Manage the entertainment experience directly from the individual listening zone of your vessel with the addition of the MS-NRX200. Most stereo functions are replicated by the remote, with full control of the volume, balance and subwoofer level at your finger tips.

Rated IPx7 Waterproof

FUNCTIONS AS A NMEA 2000® REPEATER

The MS-NRX200 wired remote can communicate with other NMEA 2000 devices connected to the same NMEA 2000 network, to display information like depth, speed and wind direction. The NRX200 remote control can be configured to display NMEA2000 network data, the following options are available:

•Wind Direction •Wind Speed •Depth •Speed over Ground •Speed through Water •Heading •Position •Water Temperature •Atmospheric Pressure •ETA

Part Number : NS-NRX200

Fusion Marine Media Device Dock - 700/200 Series

*For 700 Series and 200 Series only*

Connect FUSION’s Marine Portable Media Device Dock to your Fusion Marine Stereo and gain all the benefits of FUSION’s unique iPod connectivity, iPod video playback and two USB ports.

An iPod and USB flash can be inserted into the waterproof dock, providing full control and integration while charging. The iPod is securely protected from rough conditions and the harsh marine elements via dedicated iPod sleeves fitted to the dock. The second USB port on the rear of the dock, enables the connection of a further USB flash drive*. Featuring composite video out which enables iPod/iPhone video playback on a compatible monitor or television.

Part Number : MS-DKIPUSB

40 Marine Audio/Visual- Fusion Marine Stereos

Fusion Marine DVD Stereo MS-AV600

Listen to your favourite CD, radio station or DVD. The MS-AV600 is the perfect home theatre solution for entertaining on-board your vessel and comes complete with IR remote to control the DVD menu system for added convenience.

Sources include - AM / FM / CD / DVD / AUX

Integrate iPod audio into the MS-AV600 system with the addition of the MS-IP15L2 serial cable, alternatively for secure water resistant housing of your iPod away from the elements, the MS-IPDOCKG2 is recommended (sold separately).

Part Number : MS-AV600G

Fusion Marine IpodStereo MS-IP600

Featuring World First internal iPod docking technology. Your iPod actually sits inside the Stereo, completely protected from the harsh marine elements.

Most operations are controlled by the large rotary encoder and the large easy press buttons on the face. The unique FUSION user interface is simple to navigate, scrolling through your iPod music library has never been easier.

Sources include - AM / FM / iPod / AUX

The entire chassis is 360 ° IPx5 Water Resistant

Part Number : MS-IP600G

Fusion Marine CD Stereo MS-CD600

Listen to your favourite CD, radio station.

Sources include - AM / FM / CD / AUX

Integrate iPod audio into the MS-CD600 system with the addition of the MS-IP15L2 serial cable, alternatively for secure water resistant housing of your iPod away from the elements, the MS-IPDOCKG2 is recommended (sold separately).

The entire chassis is 360 ° IPx5 Water Resistant.

Part Number : MS-CD600G

41 Marine Audio/Visual- Fusion Marine Stereos

Fusion Remote Control for 600 Series

FUSION’s MS-WR600 Marine Wired Remote Control extends the capabilities of a 600 Series Stereo or the MS-RA200 Marine Stereo, by enabling local control of the audio in each zone of your vessel.

Up to three remotes can be linked to a 600 Series Stereo, providing true system flexibility.

Up to two remotes can be linked to an MS-RA200 Stereo.

•Complies with IPX5 Waterproof Standard •White positive alphanumeric LCD screen •Plug & play - no external power connection required •Zone control •Rotary encoder •Advanced user interface •‘Positive feel’ rubber keypad •Noise resistant CANBUS technology •Mounting hardware included

Part Number : MS-WR600

Fusion Marine Dock for iPod - 600/500 Series

*For 500 Series and 600 Series only*

The dock connects directly to your Marine Stereo, allowing full control and integration of your iPod through the Stereo. The bulkhead mount dock complies with IPX5 Waterproof Standards on the front of your unit, protecting your iPod from the harsh marine environment while it charges.

Compatible with the following Marine Stereo’s: Marine CD Stereo (MS-CD500) Marine CD Stereo (MS-CD600) Marine DVD Stereo (MS-AV600)

There are two installation options for the Marine Dock for iPod:

•A fully sealed bulkhead mount dock for instrument panel or exterior installation •A wall mount dock for cabin or interior installation

Part Number : MS-IPDOCK2G

42 Marine Audio/Visual- Fusion Marine Amplifiers

Fusion Marine 5 Channel Marine Amplifier

The MS-DA51600 is FUSION’s first 5 Channel Class-D Hi-Fi Marine amplifier; the key benefit of a Class-D amplifier is low battery drain with a high output, making this the perfect amplifier for the marine environment. The MS-DA51600 has conformal coated PCB’s for maximum product life and performance plus the amplifier chassis acts as a heat sink; reducing component core temperature and increasing efficiency.

The stainless steel cover hides away the amplifier set up controls and connections for a discrete, attractive look. Outputs include Subwoofer plus four speaker channels for sound front and rear. RCA line-level inputs are included, for easy connection to new or existing systems.

Mounting Dimensions: Depth: 210mm Height: 50mm Length: 300mm

Product Specifications: Frequency Response: 10Hz - 50kHz Peak Power: 1600 Watts Rated Power: 80 Watts RMS x 4 + 250W RMS x 1 @ 4 Ohm 1% THD+N Rated Power: 130 Watts RMS x 4 + 330W RMS x 1 @ 2 Ohm 1% THD+N Rated Power: 250 Watts RMS x 2 @ 4 Ohm Bridged 1% THD+N + 250W RMS x 1 @ 4 Ohm 1% THD+N

Part Number : MS-DA51600

Fusion Marine Zone Amplifier

FUSION’s Marine Zone Amplifier is designed to support the multi-zone technology.

FUSION’s Marine Stereos have the capability to run up to four pairs of speakers. You will also need to install a Marine Zone Amplifier if your sound system has more than four pairs of speakers.

•2 Channel •2 Ohm Stable •Water resistant design •Conformal coated PCB •Audio detect selectable function – the amplifier turns on when audio is detected and goes to sleep / low power mode when audio is not present •Selectable high pass/ full range setting •Variable high pass filter

Mounting Dimensions Product Specifications Depth 78mm Operating Range 10 -16 volts DC Height 51mm Peak Power D-Class 70 Watts Length 128mm Rated Power 20 Watts RMS @ 4 ohms per channel: 33 Watts RMS @ 2 ohms per channel

Part Number : MS-AM702

43 Marine Audio/Visual- Marine Speakers

Fusion MS-FR702 7” Marine 2-Way Speakers

Complies with ASTM Standards for UV Stability and Salt/Fog Resistance Complies with IP65 Water Resistant and Dust Standards Sold complete with two grille options in each box, Ice White and Midnight Black.

Product Specifications Efficiency (1W/1M): 91dB Frequency Response: 60 – 22kHz Impedance: 4 Ohm Peak Power (Watts) : 260

Part Number : MS-FR702

Fusion MS-FR602 6” Marine 2-Way Speakers

Complies with ASTM Standards for UV Stability and Salt/Fog Resistance Complies with IP65 Water Resistant and Dust Standards Sold complete with two grille options in each box, Ice White and Midnight Black.

Product Specifications Efficiency (1W/1M): 90dB Frequency Response: 70 – 22kHz Impedance: 4 Ohm Peak Power (Watts) : 200

Part Number : MS-FR602

Fusion MS-FR402 4” Marine 2-Way Speakers

Complies with ASTM Standards for UV Stability and Salt/Fog Resistance Complies with IP65 Water Resistant and Dust Standards Available only in Ice White.

Product Specifications Efficiency (1W/1M): 87dB Frequency Response: 90 – 22kHz Impedance: 4 Ohm Peak Power (Watts) : 120

Part Number : MS-FR402

44 Marine Audio/Visual- Marine Speakers

Sony XSMP1621 6.5” Marine 2-Way Speakers

16cm Marine 2-Way Coaxial Speaker

* Peak Power: 160W * Rated Input Power: 45W * Frequency Response: 35Hz – 26kHz * Sensitivity: 91dB/W/m * Water-Resistant Marine Design * UV Resistant

Part Number : SONY-1620-W

Sony XSMP1611 6.5” Marine Dual Cone Speakers

16cm Marine Dual Cone Speakers

* Peak Power: 140W * Rated Input Power: 40W * Frequency Response: 40Hz – 20kHz * Sensitivity: 90dB/W/m * Water-Resistant Marine Design * UV Resistant

Part Number : SONY-1610-W

Lalizas Sea Sound - Two-way Speakers

5 1/4’’ 2 Way Speaker Set 80W 6 1/2’’ 2 Way Speaker Set 100W

- Impedance: 4 Ohm - Impedance: 4 Ohm - Sensitivity 88db - Sensitivity 90db - Frequency response: 80-18000 Hz - Frequency response: 60-18000 Hz - Peak Power 80W (per pair) - Max: 100W (per pair) - RMS Power: 70W (per pair) - RMS Power: 80W (per pair) - Material: UV-stabilised ABS plastic - Material: UV-stabilised ABS plastic

Mounting dimensions: Mounting dimensions Depth: 75mm, hole dia: 110mm Depth: 88mm, hole dia: 130mm

Part Numbers : 31302 - 5 1/4’’ 2 Way Speaker Set 80W 31303 - 6 1/2’’ 2 Way Speaker Set 100W

45 Marine Audio/Visual- Marine Boxed Speakers

DNA 4 Way 6 x 9 inch Marine Wakeboard Speakers

High Performance 6x9 Speakers in a Water Resistant & In High Impact UV Protected Plastic Case.

•Mount Accepts 2.0 inch To 3 inch Diameter pipe. •300 Watts Peak / 100 Watts RMS. •SPL: 1 watt/1 metre 95 db.

Part Numbers : MWS694W (White) MWS694B (Black)

DNA 3 Way Marine Boxed Speakers

Compact 3 way boxed speakers supplied with both bracket mount and flush mounts.

•35 Watts RMS / 70 Watts Max •Frequency Response: 150Hz - 20Khz •Sensitivity: 88dB 1M/1W •Dimensions: 189mm (L) x 99mm (W) x 125mm (H) •Heavy Duty ABS Plastic Enclosure With UV Protection

Part Numbers : MSB335W (White) MSB335B (Black)

Sea Sound - 3 way Speaker Set

•3 Way Speaker Set 180W •Impedance: 4 Ohm •Sensitivity: 92 db •Frequency response: 80-20000Hz •Peak Power: 180W (per pair) •RMS Power: 60W (per pair) •Material: Polypropylene cone •Magnet: 5.4Oz

Part Number : 31304 Dimensions: 21cm (h) x 12cm (d) x 13.5cm (w)

Mini Extension Speaker

Great for adding an external speaker to your VHF.

* 8 ohm / 4 watt * Dust and Water resistant * Small size: 80x70x45mm * 1.5m cable * 3.5mm plug

Part Number : 7362 46 Marine Audio/Visual- Marine Stereo Covers

Sony Waterproof Stereo Cover

Sony GMD-616 Stereo Cover

Keep your marine stereo protected from the elements with the GMD-616 waterproof stereo cover. It features a weatherproof front mask opening with an O-ring seal for reliability. Plus, this stereo cover is compatible with most DIN-sized head units and is constructed of a durable injection moulded polycarbonate frame.

Features: Durable Injection Moulded Polycarbonate frame Front mask opening type for easy operation Weatherproofed with O-Ring Seal for Reliability Compatible with all DIN-sized head units

Dimensions: Mounting Dimensions: 111mm (h) x 241mm (w)

Part Number : SONY-GMD616 Spray Proof Headunit Cover

Spray proof headunit cover. Fold down front with gasket for tight seal. Designed to protect the front of a flush mounted stereo.

Part Number : SONY-23937

Stereo Cover

A small hatch specifically for covering your stereo headunit from the elements Stereo Cover 110mm X 235mm

Part Number : 4636W

SeaWorthy Marine Stereo Cover/Enclosure

The SeaWorthy Marine Stereo Cover/Enclosure installation system simplifies the mounting of any stereo. SEA SHROUD snaps into RTR5200 protecting the radio from water and eliminating the need for a backstrap. Includes SEA SHROUD and RTR5200 (radio not included).

•Simplify installation •Keeps moisture out •UV & weather protective door

Dimensions: 177W x 152D x 50H mm

The RTR5200 auto-opening door with flush mount features a Lexan cover and removable trim ring. Fits shaftless radios.

Part Number : STEREOCOV 47 Marine Audio/Visual - Marine Stereo Enclosures

Fully Enclosed Marine Stereo Case

Fully Enclosed Salt Water & UV Tested Marine Case. Now you can mount your stereo anywhere on your dashboard, under the cabin roof or under the consul. Ideal For Applications In Environments Where Moisture, Dust & High UV Are Present.

Features: •Case manufactured from UV stabilised ABS plastic and fitted with a drop down hinged door with o-ring seal & polycarbonate tinted perspex window •Suits standard DIN sized unit Radio/Cassette/CD Players •Designed for under dash or surface mount on a console. Gymbal adjusted U-shape mounting bracket •All hardware fittings are manufactured from rust proof stainless steel

Part Number : MAC001

48

Marine Audio/Visual - Television

RSE TV with Sky Card Reader and DVD

32”, 24” or 19” LED/LCD Satellite TV with HD Tuner with Freeview built in and Sky card compatible

Designed by NZ Technicians for the NZ Environment This is a dedicated 12V DVB-T (Terrestrial Freeview) and DVB-S2 (High Definition Satellite) Receiver for both Sky and Freeview TV, DVD (side loading) and has a USB Port with full Media Centre capability, external hard drive use and built in PVR (Personal Video Recording).

•Built in FM Transmitter allows you to send the audio wirelessly through the motorhome/caravan speakers or use our Wireless FM Headphones. •Built-in Multi Media Centre allowing you to play music, movies, pictures and read .txt files. •Digital radio and built-in PVR (Personal Video Recording) direct to a USB Stick or hard drive. •Wireless headphone capable. •Comes with 240V adapter and 12V cigarette lighter adapter. •In-built polarity protection. •Full 1080i screen. •Anti-shock and anti-vibration makes it ideal for the motorhome/caravan and marine environment. •Very slim Design •VGA, USB, P Audio, Mini AV, Mini YPbPr, HDMI, Earphone and Coax inputs •Pay to view card capable (insert your Skycard) •Just plug and play - all channels are pre-loaded •24 month warranty.

Part Numbers : TVDVD32 - 32” TV (Dimensions: 786W x 555H (on stand) 517H (without stand) TVDVD24 - 24” TV (Dimensions: 582W x 404H (on stand) 369H (without stand) TVDVD19 - 19” TV (Dimensions: 456W x 328H (on stand) 295H (without stand) Fusion Marine 22” LED TV with DVD

The built in DVD player allows you and your family the ability to watch your favourite movies and music videos. Use the stereo headphone jack for privacy or connect your TV with the RCA pre-outs into your FUSION head unit (600 or 200 Series) for an improved entertainment experience.

•Conformal coated PCB For protection against corrosion •Full HD (1920 x 1080) 1080p •Included Full-Function Remote Control. Wall mounting bracket •Media Built-in DVD/CD drive,. Built in DVB-T digital tuner. NTSC, PAL TV tuner. •Media Component and Composite video inputs. HDMI input. USB connection. VGA port. •Other Closed Caption Decoder. Parental Lock. Sleep Timer. Built in speakers (4W x 2) •Power Supply 110-240V AC, 12V DC 5 metre cable •PVR functionality Record digital TV** •Screen 16:9 wide screen •Dimensions: 533.83 x 361.61 x 58 mm (W x H x D) •Compatible file formats include .jpg, .jpeg, .gif, .mp3, .mpg, .vob, .avi, .mp4, .dat and .txt.

** High speed USB drive required. Recording time will vary depending on size of USB drive.

Part Number : MS-TV220LED

50 Marine Audio/Visual - Satellite Receivers

Mini HD Box Satellite Receiver

The smallest, most powerful high definition free to air satellite receiver available on the market. Can be used both horizontally or vertically. USB2 port to attach USB hard drives etc. for updating firmware, channels lists and also recording and pausing live TV. Built in Infra Red sensor, allows the box to be hidden in a cupboard and just point the remote at the remote sensor to change channels and volume. Takes P2 Sky Cards - HD Sky, includes TV 1, 2 and 3. First 16 channels loaded are Freeview. Laminated channel list supplied with operating tips. Recording onto an external USB stick from the 7 day EPG guide system Ideal for the motorhome, boat or caravan etc.

Features: • Comes pre-loaded with all channels and services • No tuning required • Factory set for 10750 LNB • Full instruction manual • Fully upgradable via software • Dimensions: 162W X 115D X 30H (mm) • Weight: 200 gm. • 12V or can be modified to 230V (please ask if required) • Remote Control

Part Number : TVMINIHDIR Micro Satellite Receiver for Freeview

The micro S1812 from Starview is so small you can install behind a television or away in a cabinet so the end user does not see it. A great way of hiding cables and with the included remote eye extension you can easily control the receiver from the remote control.

It is also powered by 12VDC so it’s great for boats, motor homes, caravans and camping. The receiver comes with various mounting options and all cables and a 230VAC plug pack. Comes pre-programed with the latest Freeview channels and with the Starview quick guide for easy use.

Features: • Enjoy crystal clear satellite TV anywhere in New Zealand! • Freeview channels preset • Mounts behind TV, no messy cables • Remote control • 12V and 230V • Dimensions of the receiver: only 65W x 75L x 25H (mm)

Part Number : FREEVIEW RSE Lockable Swing Arm Bracket

New RSE Lockable Swing Arm Bracket made form Aluminium and Hi Tensile Steel. Pefectly matched with the the RSE 19” and 24” HDTV’s.

*Swing Arm Wall Mount *Max Weight: 7.5Kg *Tilt Angle: 45 deg up, 45 deg down *Swivel Angle: 60 degrees

Part Number : RSE2817 51 Marine Audio/Visual - Satellite Antennas

Ocean Series Satellite Atennas

A satellite dish used in conjunction with a Freeview / Sky receiver is the only reliable method of watching TV in remote areas. Get perfect TV picture quality on your boat with an Ocean satellite dish. Exclusive NZ importer and distributor of Ocean Satellite Antennas. Ocean series of satellite antennas are fully tested in proven for New Zealand conditions. The smallest and lightest Gyro Stabilized Satellite dishes in the World. State-of-the-art technology will provide perfect Satellite TV signals on your boat while under way or at rest.

Ocean 037m Satellite TV Antenna Ocean 032m Satellite TV Antenna

37cm Marine Sat TV Antenna 32cm Marine Sat TV Antenna

Enjoy Powerful Digital Satellite TV, where ever you go, when ever 25% smaller than the competition and weighs less than 4kg. you want. Enjoy Powerful Digital Satellite TV, where ever you go, when ever Model: O37m you want. Antenna Type: Parabola Parabola Size: 370mm Antenna Type: Parabola Radome Size (Height x Diameter): 440mm x 430mm Parabola Size: 320mm Minimum EIRP: 50dBw Radome Size (Height x Diameter): 350mm x 360mm Antenna Gain: 31dBi Minimum EIRP: 51dBw Stablized Type: 2-axis step motor Antenna Gain: 27dBi Elevation Range: 0º to 90º Stablized Type: 2-axis step motor Azimuth Range: Unlimited/450º Elevation Range: 0º to 90º Compatible receiving region: Korea, Japan, China, Europe, USA, Azimuth Range: Unlimited/450º Italy, New Zealand, Australia, South East Asia, Middle East. Compatible receiving region: Korea, Japan, China, Europe, USA, Italy, New Zealand, Australia, South East Asia, Middle East. Part Number : 037M Part Number : 032

Winegard DS-5 - Crank-up Satellite TV Antenna

The Winegard DS-5 Crank Up Satellite is the only EMC tested and C-tick approved Winegard in New Zealand.

This is a high quality and reliable, easy to install and economical crank up satellite. Setup is simple and operation is even easier with the Winegard Digital Sensor.

Suitable for use on Caravans, Pop Tops and Motorhomes.

•LNB and LNB Holder supplied pre-fitted together •Low profile non-rusting LNB •2 Year Manufacturer’s Warranty on the LNB •Comes with RG6 Satellite Cable •Only Winegard has a Digital Sensor for the elevation readout, ensuring a quick, easy and no hassle set up •12V or 9V installation • Winegard DS-5 sat antenna for motorhomes comes complete with LNB, LNB Holder and Strut Kit

Part Number : O31 52 53 BBQs

55. BBQs & Smokers

Kuuma Profile BBQ Kuuma Stow & Go Barbecue Kiwi Sizzler BBQ with Window Kiwi Sizzler Larger Smoker Gourmet Fish Smoker

57. Gas Bottles & Fittings

Marine grade Aluminium Alloy Gas Tanks LPG Regulator & Hose Hose to connect High Pressure BBQ to LPG Bottle LPG Adaptor - POL to Companion Propane fuel cartridge 465g

58. BBQ Accessories

Rod Holder Mount for Stow & Go BBQ Rail Mount for Stow & Go BBQ Boaties Fry Pan Boaties Baking Pan Smartspace Frypan Barbeque Griddle / Hot plate Food Tray for Stow & Go BBQ

54 Barbeques - BBQs & Smokers

Kuuma Profile BBQ

The California Grill, for good food and good times.

USA design Stainless steel construction 150 sq inches of cooking surface. Integral foldaway legs Removable grease tray Stay cool handle

9000 BTU

The name Kuuma translates into “HOT” - fitting for a barbeque & water heater company. The creative design team of the company are of Finnish nationality.

* Rod Holder and Rail mountings sold separately

Dimensions: Width: 250mm X Length: 502mm (including gas fittings 616mm) Height (body): 142mm (with legs folded out 168mm) Height including handle: 172mm (with legs folded out 198mm)

Part Numbers : 83727H - Uses convenient high pressure “Coleman type” Canisters. These can be unscrewed in order to facilitate stowage. These are ideal where space and convenience is important. Gas canisters will last a typical season; around a dozen or so barbeques. 83727L - Regular gas bottle style. Connects to a regulated LPG bottle

Kuuma Stow & Go Barbecue

ORIGINAL, STILL THE BEST YOU ASKED FOR IT, Kuuma DESIGNED IT ...

THE BEST COOKING MARINE BARBECUE EVER!

Foldaway legs, locking sides, stowaway handle your ideas - our designs.

Has fold down legs (rail mount not included) Great for sitting on your bait board or even taking into the beach.

Dimensions: 265mm(width) X 600mm (OA length including fittings) 320mm high (to top of handle with legs down and top closed). The cooking surface is about 480 X 260mm

Part Numbers : 83722H - Uses convenient high pressure “Coleman type” Canisters. These can be unscrewed in order to facilitate stowage. These are ideal where space and convenience is important. Gas canisters will last a typical season; around a dozen or so barbeques. 83722L - Regular gas bottle style. Connects to a regulated LPG bottle

55 Barbeques - BBQs & Smokers

Kiwi Sizzler BBQ With Window

The Portable Kiwi Sizzler is a durable well designed marine grade BBQ. Perfect for the boat or outdoors, this BBQ is made of 316 marine grade stainless steel and has cast iron hot plate/grill for all applications. A fully enclosed BBQ with viewing window you will never need to worry about burning or over cooking. A large 12,000BTU/HR Burner helps cover the plate with even heat distribution to cook food evenly.

Features:

*Quality HD stainless steel *Stainless steel construction *Stainless steel Burner *Clip Down Lid with comfortable handles Specifications: *Slide out fat drip-tray *Cast Iron Cook plate Main body dimensions: 50L x 32W x 35H CM’S *Pizo Ignition system Over all Lenght: 63cm (including control unit on end.) *Low / High temperate control Plate size: 46L x 28W 1/3 grill 2/3 hot plate *Gas regulator included Burner power: input rating 12,000 BTU/HR stainless steel burner *Foldaway legs

Part Number : 83725 Kiwi Sizzler Large Smoker

Kiwi Sizzler Large Smoker Made from High grade stainless steel and with easy LPG operation you can smoke your weekend catch in one go!

It connects to a standard NZ LPG 9kg bottle with regulator and has variable air flow vents to adjust cooking times and smoke build up.

A heat gauge shows when you are at the right temperature and the easily adjustable gas element makes for quick prep time.

Hinged door with push & twist lock handle and comes with removable cast iron smoke chip/water steam tray

Kiwi Sizzler Large Smoker Features:

*High grade stainless steel *Easy LPG operation *NZ LPG regulator with screw thread connection *Variable air flow *Heat guage *Easily adjustable gas element *Hinged door with push & twist lock handle *Adjustable vents on top & sides *Removable cast iron smoke chip/water steam tray *Comes with regulator and hose *Uses standard wood chips *2 grab handles Dimensions: 1080 x 505 x 425 cm

Part Number : SMOKERGUP

56 Barbeques - Smokers & Gas Bottles

Gourmet Fish Smoker

• Heavy duty stainless steel construction • Large 18.5ltr cooking area • Bakelite heat resistant handle • Two tier cooking racks • Size is 460 x 340 x 180mm

Part Number : SMOKER

Marine grade Aluminium Alloy Gas Tanks.

Fully weather resistant and impervious to salt. Ideal for gas cylinders on a boat or outside your home.

Corrosion resistant construction and material to ensure maximum life in the marine environment. Patented one piece, one seam weld construction.

Our cylinders are made from special refined Al-Mg-Si alloy, and have many advantages over steel cylinders.

* At the same volume, the mass of our cylinders are half that of steel * Long working life * Non rust boat gas cylinder * Can be used without any anticorrosion coating * Because of cleanliness and resistance of the alloy it can be used for cooling gases * The weld is on the most favourable part of the pressurised cylinder so it is loaded less * There is no spark-danger. * Can be recycled

Approvals: New Zealand & Australian Approved. EN12-862/2000 Inspection Authority: TUV. Germany.

Part Numbers : LPG2.2 (2.2 kg Capacity) LPG10 (10 kg Capacity) LPG20 (20 kg Capacity) LPG5 (5 kg Capacity) LPG15 (15 kg Capacity) LPG23 (23 kg Capacity)

57 Barbeques - BBQ Fittings & Accessories

LPG Regulator & Hose

For use with Low Pressure BBQs

POL Regulator with 8mm (dia) Low Pressure Hose and 3/8 SAE Outlet. For connecting “Low Pressure” Barbecues to POL cylinder.

Regulator: 2kg/hr. - 2.8 kpa.

Part Numbers : REG1000 (1000mm hose) REG600 (600mm hose) Hose to connect High Pressure BBQ to LPG Bottle

1.5m Hose to connect High Pressure (Coleman type canister) BBQs to an LPG Bottle.

Compatible with : 83727H 83722H

Part Number : 59823

LPG Adaptor - POL to Propane fuel cartridge Companion 465g Suits our 2.2Kg alloy gas bottles For use with High Pressure BBQs. 90 deg Angle Also suits various stoves and lanterns by Coleman. Part Number : LPGPOL

Compatible with : 83727H 83722H

Part Number : PROPANE1 Rod Holder Mount for Stow & Go BBQ

Rod Holder Mount Rail Mount for Stow & Go BBQ To suit Stow & Go BBQ Stainless Steel, 60 Degree Angle Sturdy Rail Mount * Designed for use with Part Number : 83754 Stow Go BBQ * Fits 7/8 to 1-1/4-inch round or square rail

Part Number : 83635

58 Barbeques - BBQ Accessories

Boaties Fry Pan

New Features * Stainless Steel Base allows use on induction hobs * Silicon Handle for a more comfortable grip

Frustrated trying to fit a round frypan on to a square stove?

The answer - Boaties Frypan

Pan Measurements 250 x 200mm the same approximate cooking surface as a 255mm round fry pan

* Heavy gauge aluminium with stainless steel base gives an even and stable heat transfer * High Quality non-stick surface ensures a longer pan life * Compact Ovenproof Handle easy to grip and high enough to clear a fiddle rail

Part Numbers : FC10 (Fry Pan) FC11 (Lid)

Boaties Baking Pan

Now with one pan you can roast, braise and bake for the whole crew!

* Designed for one-handed use making removal from the oven easier * Compact Detachable Handle is always cold when used and stows away neatly with the pan * Oven and Stove Top use * Size 31 x 21 x 6cm - over 2 litres volume * Heavy Guage Aluminium gives an even and stable heat transfer * Double Coated non-stick surface ensures a long pan life

Part Number : FC12

Barbeque Griddle / Hot plate

Great for Cooking Eggs on your BBQ grill! * Flat on one side and ribbed on the other side * Teflon coated with “stay-cool” handles

Dimensions: 315mm x 210mm Overall 265mm x 200mm Cooking surface ~20mm thick plate

Part Number : 83751

59 Barbeques - BBQ Accessories

Smartspace Frypan

SmartSpace Frying Pan is a new concept in cookware that fits on even the most compact stoves. Perfect for the RV, boat or baches were space is essential. The non-stick finish makes washing up effortless.

Cookware Features:

Stainless steel base suitable for gas, electric or induction cooking Durable 3mm aluminium walls Teflon coated non stick interior (high grade) Enamel baked exterior Removable handle does not transfer heat Dishwasher safe Silicone mat; Place hot pots on mats to protect your benchtop. Use between pots when stacking to protect the non-stick coating. High sides to reduce splattering Removeable Handle

Dimensions (mm): 250L x 215W x 55H

Part Number : FC13

Food Tray for Stow & Go BBQ

Provides a convenient place to put your food while grilling. • Heavy duty stainless steel construction • Dimensions: 307 x 170 x 38mm

Part Number : 83245

60

Chandlery

63. Boat Hooks 69. Inflation 76. Accessories

Boat Hook (Head Only) Pumps Bathyscope

Boat Hook 1.47m Welcome Mat Boat Hook 1.8m (6 ft) Double Action Hand/Floor Pump Ski Rope and Handle Boat Hook 6 ft - white Air Pump - 12V - Inflate / Deflate Illuminated Chart Magnifier Boat Hook 0.62-0.91m Foot pump - 5 Litre Boat Hook 1.2m-2m Quick Pump “Sea Power”, 12V, 60W Vacuum Cleaner ‘Sea Power’ 12V Bridgenorth Bailer / Boat Hook Electric Boat Inflator 12V Brass Porthole Mirror Boat Hook 1.18-2.04m Adaptor Valve for Inflatable Boats Teak Book Rack Boat Hook 1.25-2.0m Multi-Valve Adaptor Wind Indicator Telescopic Boat Hook with Paddle Fold Away Aluminium Trolley Lalizas Kayak Paddle - 2m Plastic Clinometer Kayak Paddle - 2m 70. Dinnerware Cork Key Ring Float Floating Telescopic Paddle 17 Piece Dinnerware Set Measuring Jug Telescopic Boat Hook with 2 “Exclusive” Cleaning Brushes Slip Stop - Non Slip Material “Flow Thru” Boat Brush 24 Piece Cutlery Set “Exclusive” 6 Piece Mug Ser “Exclusive” 78. Gullsweep 65. Sailboat Bird Scare Control 71. Drink Holders Hardware Standard 2m Gullsweep

Hanging Gullsweep Kiwi Grip Non-Slip Paint Drink Holder - Lalizas Store All Gullsweep Rail Mount No-Wear Chafe Guard Drink Holder Stainless Steel LALIZAS Winch Handles Drink Holder Lock-In Floating Winch Handles Rail Mount Drink Holder Sail Repair Tape BoatMates Folding Drink Holder - 80. Brass Lamps Large Winch Handle Holder PVC White (twin pack) Small Winch Handle Holder Stainless Steel Recessed Drink & Bells 10mm Single Block Pulley with Holder Swivel Recessed Drink Holder - Black Cambrian Miners Safety Lamp Recessed Drink Holder - White Lacquered Brass Kerosene Lamp Teak Glass Holder for 4 Glasses Heavy Duty Brass Ship Bell 67. Dinghy Traditional Cargo Lamp Brass Kerosene Cabin Lamp Accessories 72. Storage Ships Bell Ship Wheel Bell Dinghy Wheels Case with Net and Plastic Frame Inflatable Boat Repair Kit Snap Davits for Inflatable Dinghies ‘Store-All’ for Swimboard Mount BoatMates Cruisin Caddy Rowlock Plate BoatMates Cockpit Organizer Weaver Replacement / Extra BoatMates Trash Stasher Rubber Pads BoatMates Pedestal Cooler Bag Weaver Davit Heads BoatMates Pedestal Gear Bag Weaver Quick Kit For Snap Davits Deluxe Bow Bag for Inflatable Weaver Stainless Yoke Boats Weaver Stand Off Brackets Te’ne’re’ Under Seat Storage for Weaver Rubber Pad Inflatable Boats Dinghy Davits Stanchion Clip Holding Straps

62 Chandlery - Boat Hooks Boat Hook (Head Only)

Boat Hook Head for 30mm tube Part Number : 3848

Boat Hook 1.8m (6 ft) Bridgenorth Bailer / Boat Hook

* 25mm diameter Anodized Aluminium tube A boat-hook, a pump and a manual washer. Part Number : 50040 Now with thread for attaching a brush

Telescopic aluminium handle which securely locks in place for a strong boathook 2 Sizes: 960mm - 1520mm long (5ft) or Boat Hook 6 ft - white 1.4m - 2.4m long (8ft).

* 30mm diameter Aluminium tube Canadian manufacturer. 2 year manufacturer’s warranty. * White powder coat finish which doesn’t tarnish * Sturdy Italian Made Product Part Numbers : Part Number : 3854 BAILER5B (5 foot) BAILER8B (8 foot) BAILERB ( Brush Attachment only) Boat Hook 0.62-0.91m Quality Kayak Paddle with Split Shaft * Sturdy Aluminium construction * 34mm diameter rubber grip Kayak paddle with split 2-piece shaft for easy disassembly. * Twist action telescopic Two blade angle options and anti-drip rings. * Made in Europe by Plastimo Part Number : 3860 Features: *Two Piece shaft *Strong aluminum alloy *Anti-drip rings *Light weight Boat Hook 1.2m-2m *2m Long *Asymmetrical paddle design reduces fatigue and greater * Aluminium Tube with hydrodynamic stability Plastic Tip and Locking Ring. *3 position ferrule * Twist action telescopic *High density foam grips Part Number : 50033 Dimensions: Full length: 2130mm Split length: 1050mm and 1120mm (longer piece because of ferrule) Boat Hook 1.18-2.04m Part Number : 50280 1.18m to 2.04m Telescopic Tube Dia: 30mm (outer) and 25mm (inner) Part Number : 50050

Boat Hook 1.25-2.0m

* Telescopic * Tube Dia: 30mm (outer) and 25mm (inner) * White powder coat finish which doesn’t tarnish * Sturdy Italian Made Product Part Number : 3855

63 Chandlery - Boat Hooks

Lalizas Kayak Paddle - 2m

* Sturdy marine grade Aluminium shaft and virtually indestructible plastic blades.

Part Number : 50290

Telescopic Boat Hook with Paddle

* Sturdy Aluminium construction * Tube Dia: 30mm (outer) and 25mm (inner) * Twist action telescopic

Part Numbers : 3858 (1.04m to 1.27m) 57347 (1.22m to 1.69m) 3859 (1.56m to 2.30m)

Floating Telescopic Paddle

Overall length when fully extended: 1045mm Can be adjusted to 670mm from the paddle. Blade size: 157mm x 375mm Tube diameter: 25mm

Part Number: 156120

“Flow Thru” Boat Brush

The Lalizas “Flow Thru” Boat Brush has 4 exit points to clean evenly on all surfaces.

Can be attached to any standard cleaning brush/bailer.

Part Number : 70689

Telescopic Boat Hook with 2 Cleaning Brushes

The LALIZAS cleaning set consists of one wash brush, one scrub brush, one hook and one telescopic handle.

The boat brushes are used for gentle or hard cleaning respectively. They are made of polypropylene body and PVC bristles to resist better against the salt and the sun. The nylon hook is light, with small length and large angle for easier and better hooking. The brushes and hooks by LALIZAS are threaded in order to be fitted to the handle.

The telescopic handle is 110cm long and can extend up to 200cm, so that you can adjust it accordingly. It is made of anodised aluminium for more durability and longevity. The LALIZAS cleaning products have been designed for your convenience according to your needs.

Part Number : 50906

64 Chandlery - Kiwi Grip & Sailboat Hardware

Kiwi Grip Non-Slip Paint

As a homogeneous material, KiwiGrip doesn’t suffer the problems encountered with products filled with sand, walnut shells, beads, rubber fleck, or other fillers. Coatings with fillers tend to wear through, and the fillers fall out — leaving an unsafe deck that’s hard to clean and even harder to re-coat.As a roll-on product, KiwiGrip is considerably faster and less expensive to apply. Coverage: 2 square meters per liter (80 SF/Gal).

Ease of application is a big advantage of KiwiGrip. Detailed application instructions are provided with every can. Our special texture rollers and our non-toxic formula make KiwiGrip very easy to apply.

Available in 1 or 4 Litre tins and in 3 colours: White, Cream and Grey.

Included with each Kit is: 1 x textured roller sleeve (Part Number: 1020-4) 1 x roller handle (Part Number: 1030-4)

Kit Part Numbers : KG1LKITC - Kiwi Grip Non Slip Paint 1L Cream - Kit KG4LKITC - Kiwi Grip Non Slip Paint 4L Cream -Kit KG1LKITSG - Kiwi Grip Non Slip Paint 1L Soft Grey - Kit KG4LKITSG - Kiwi Grip Non Slip Paint 4L Soft Grey -Kit KG1LKITW - Kiwi Grip Non Slip Paint 1L White - Kit KG4LKITW - Kiwi Grip Non Slip Paint 4L White -Kit

No-Wear Chafe Guard

Have you ever looked at your boat and wondered “HOW CAN I STOP THE ROPES RUBBING ON THE GELCOAT, FIBREGLASS AND WOOD” and prevent wear and tear on my boat?

Well now all your problems are over. Introducing “The No-Wear Chafe Guard”

*Prevent chafe and damage to your boat *Easy to install *Highest grade marine Stainless Steel *Industrial strength double sided adhesive *Moulds easily to the shape of your boat

Installation The No-WearGuard is easy to apply. Simply clean and dry the area of the boat to be used (lightly filling and sanding any dents if neccessary for best results).

Remove the backing paper from the adhesive tape, position the No-Wear Guard and press it down, rubbing with a soft cloth to ensure all edges are firmly stuck down. If being used on a sharp bend, it is advisable to pre-bend before removing the backing paper(this can be done by hand, or around the area to be used) this will help with the adhesion. If for any reason you wish to remove the No-Wear Guard, use either a heat gun or hairdryer, gently heat until it can be pulled off.

Part Numbers : 1007 (228 x 50) - Single Pack 1008 (228 x 50) - Twin Pack 1009 (228 x 50) - Four Pack

Noticeable damage that has been Now easily fixed with a No-Wear caused by chafing on the Gel Coat. Guard that will protect the Gel Coat and eliminates further damage. 65 Chandlery - Sailboat Hardware

LALIZAS Winch Handles

LALIZAS Winch Handles have been designed to operate efficiently with the minimum of effort from you.

They are lightweight, easy to handle and highly resistant to the marine environment, as they are constructed from anodised aluminium.

LALIZAS winch handles are available in two lengths 20cm and 25cm, each with or without locking mechanism and speed handles with ball bearing in them.

Part Numbers : 11857 Winch Handle Locking with Speed Handle - 200mm 11859 Winch Handle with Speed Handle - 200mm 11860 Winch Handle Locking - 250mm 11861 Winch Handle Locking with Speed Handle - 250mm 11863 Winch Handle with Speed Handle - 250mm

Lock-In Floating Winch Handles Sail Repair Tape

Made of Light but Strong Plastic. Clear Mylar that is UV and Grey with red handle water resistant Add protection on areas Part Numbers : that come in contact with 63527-08 - 8” (200mm) spreaders 63527-10 - 10” (250mm) Self-adhesive strong backing Designed specifically for the temporary repair of sails in order to prevent further damage until repairs can be made. Large Winch Handle Holder PVC Part Number : 11555 = 100mm (width) x 3m (length) PVC holder for quick storage of winch sheet handles or fishing knives

Soft flexible PVC Round base with drainage hole

4 x mounting holes & 4 x screws and washers included

Dimensions: 298mm (l) x 92mm (w) Large Winch Handle Holder

Part Numbers : 63572 (Round Base) 63573 (Square Base)

10mm Single Block Pulley with Swivel Small Winch Handle Holder Manufactured from stainless steel and PVC holder for quick storage of winch fibre reinforced nylon sheet handles or fishing knives Lightweight pulley designed for use on Part Number : 63571 small boats. Ideal for dinghies.

Sheave (Dia) - 34mm Max. Rope (Dia) - 10mm D shackle Pin (Dia) - 3mm Weight - 70g

Part Number : 10131

66 Chandlery - Dinghy Accessories

MaXtek Dinghy Wheels

The Dinghy Wheel is designed to allow easy movement of small boats under 115 kg or 3.5 meters long. Suitable for inflatables, dinghies etc., making launching and retrieving easy.

Attaching to the transom, the wheels can be lowered for moving the boat, or raised in two different positions whilst the boat is on the water.

* 3 Position * Anti-corrosion construction * SS mounting hardware supplied * Stainless shafts and pins secure the wheels

Part Number : 5825

Inflatable Boat Repair Kit

* Glue for PVC Inflatable Boats * Standard Inflating Valve * Valve Inflating Adaptor * PVC Material - 3 pieces

Part Number : 50953

Snap Davits for Inflatable Dinghies for Swimboard Mount

Snap Davits for soft or hard bottomed Inflatable dinghies for vessels with Swim Platforms Facilitates easy loading and transportation of dinghy. Dinghy swivels up on brackets.

Part Number : RBD100

67 Chandlery - Dinghy Accessories

Weaver Replacement / Extra Weaver Davit Heads

Rubber Pads Weaver Davit Heads. Sold as a pair. Weaver Rubber Pads for use with Weaver snap davits on inflatable boats. Part Number : Sold in pairs. Weaver RS110

Part Number : Weaver RP101

Weaver Stainless Yoke

Weaver Stainless Yoke Sold as a pair. Weaver Quick Kit For Snap Davits Part Number : Weaver RPSH120 Plates used for easy removal of davit heads from swim platform (used with RBD100 only)

Includes mounting hardware and quick-release pins With lanyard.

Part Number : Weaver Quick kit Weaver Rubber Pad

Rubber standoff pad (sold individually). To be used with the Weaver Stand Off Brackets

Part Number : Weaver RP301 Rowlock Plate

Pair of Rowlock Mounts. Two counter-sunk screw hole to suit flush mounting on to wooden/fibreglass/plastic dinghys

Manufactured from Chrome plated bronze. Made in New Zealand and sold as a pair.

Dimensions: 67mm (l) x 24mm (w) x 30mm (d) 11mm (Dia) Rowlock Shaft

Part Number : 5824 Weaver Stand Off Brackets

Weaver Stand Off Brackets 24” or 30” long Stainless Steel brackets Sold in pairs

Part Numbers : Weaver SO24 - 24” Brackets Weaver SO30 - 30” Brackets

68 Chandlery - Dinghy Accessories & Inflation Pumps

Dinghy Davits

60mm (tube Diameter) or 40mm (tube Diameter) Made of Stainless Steel Arm has about about 750mm reach 140mm Cleat Davits are sold individually

Lifting load: 170kg/pair - 60mm davit 140kg/pair - 40mm davit

Part Numbers : 4472 - 60mm (tube Diameter) 4470 - 40mm (tube Diameter) Double Action Hand/Floor Pump Electric Boat Inflator 12V

The LALIZAS Double Action Hand/Floor Pump ideal for inflating * 40mbar, 400lt/min or deflating dinghies, ski tubes, air mattresses plus many more * Ability of inflation and deflation inflatable products. * Self-adjusting pressure at 40 mbar (0.55psi) so as to avoid over-inflation To inflate or deflate simply * Fast and durable motor fasten the air tube to the * Low current consumption appropriate connection * Supplied with an adaptor suitable for the most common (“Inflate” or “Deflate”) and type of valves pump with steady up and * Can be connected to the car lighter (3m cable) down strokes. Part Number : 11501 Supplied complete with a flexible air tube with 4 sizes of adaptor nozzles, and a kit of 6 adaptors (also sold separately).

Large comfortable handles give better grip and foot plates provide stability during pumping.

Part Number : 10230 Foot pump - 5 Litre Adaptor Valve for Inflatable Boats

* Collapses and clips closed Easily connect a pump hose to an inflatable boat valve with this * 5 Litre Chamber adaptor * High volume air displacement Connects to the most common type of valve; Halkey-Roberts

Part Number : 50952 * Adaptor for Air Pumps * Two hose sizes - 15 - 20mm Ø

Multi-Valve Adaptor Part Number : 98970

Universal 6-piece adapter wheel will adapt to the most common type of inflatable boat valves

Part Number : 10231

69 Chandlery - Inflation Pumps & Dinnerware

17 Piece Dinnerware Set “Exclusive”

Made of 100% Melamine. Dishwasher and microwave safe.

Includes: *Dinner Plate, Ø 26cm, 4 pieces *Dessert Plate Ø 20cm, 4 pieces *Cereal Bowl Ø 15cm, 4 pieces *Mug, 4 pieces *Salad Bowl Ø 24cm, 1 piece

Part Number : 57350

Slip Stop - Non Slip Material

Non slip material cut to size 1ft x 12ft roll

Keep everything safe and secure by preventing slipping and sliding. Washable, easily trimmed material works in tool boxes, 24 Piece Cutlery Set“Exclusive” rugs, van floors, shelves, dash boards or anywhere things slide around or rattle in your RV. Use as a liner between plates, cups and Made from stainless steel and appliances. ABS plastic.

Available in Cream or Blue 6 x Forks, Knives, Spoons and Teaspoons. Part Numbers : STOPSLIP BLUE Dishwasher safe. STOPSLIP CREAM Part Number : 57208

6 Piece Mug Set “Exclusive”

6 piece mug set. Made of 100% Melamine. Dishwasher and microwave safe.

Part Number : 57218

70 Chandlery - Drink Holders

Drink Holder - Lalizas Store All

This compact and convenient cockpit saver keeps your drinks up and out of the way.

With the cutout for handles it is great for coffee mugs and most glasses, or canned drinks.

Dimensions: 100mm (h) x 110mm (d)

Part Number : 99232 (Graphite colour)

Drink Holder Stainless Steel

Folds closed for low profile look and folds open to hold your drinks

Made of Stainless Steel, with rubber padding on arms and base.

Arms are adjustable so can suit a range of drink sizes.

Part Number : 54098

Drink Holder

Folds closed for low profile look and folds open to hold your drinks Made of reinforced nylon.

Part Numbers : 54092 (Black) 4252 (Grey) 54092-BP (Black Blister Pack)

Rail Mount Drink Holder

Attaches easily to rails or stanchion posts. Manufactured from white polyethylene. It will easily hold a full-sized insulated drink can or mug.

Includes stainless steel mounting screws *Flat or bulkhead mount *Fits 20 - 25mm rails (1”) horizontal or vertical

Part Number : 54095

71 Chandlery - Drink Holders & Storage

BoatMates Folding Drink Holder - White (twin pack)

The new Folding Drink Holder features double-ring collar assembly capable of holding both cans and cans with cozies.

With a new all-resin design, the drink holder won’t rust or corrode. Its injection molded, commercial grade resin provides superior durability and an attractive appearance.

Few moving parts results in a longer, more reliable product life. The holder can be mounted with Tempress’ Super-Suction cups or screw mounted.

Part Number : 2170-2

Stainless Steel Recessed Drink Holder Recessed Drink Holder - Black

Dimensions: Dimensions: Cut out diameter: 98mm Cut out diameter: 98mm Overall diameter: 110mm Overall diameter: 110mm Depth: 77mm Depth: 77mm

Part Number : 54091 Part Number : 54094

Teak Glass Holder for 4 Glasses Recessed Drink Holder - White

Teak Glass Holder for 4 Glasses Dimensions: Cut out diameter: 70mm Dimensions: Overall diameter: 85mm Length: 430mm Depth: 73mm Width: 90mm Height: 90mm Part Number : 54093

Glass Holder diameter: 70mm

Part Number : 93332

Case with Net and Plastic Frame ‘Store-All’

This case helps you organise all items when on board with a flexible holding net. It is made of UV resistant plastic and can be easily installed either with screws or with a sticker (supplied) ideal for inflatable and rigid boats.

Dimensions: 205 x 120 x 20mm

Part Number : 11900

72 Chandlery - Drink Holders & Storage

BoatMates Cruisin Caddy

This easy to mount organizer holds your favorite beverage, personal items, and even a couple of your favorite lures. Mounts on a flat surface. Great for small boats with limited cockpit storage.

With a new all-resin design, the cruisin caddy won’t rust or corrode. Its injection molded, commercial grade resin provides superior durability and an attractive appearance.

The holder can be mounted with Tempress’ Super-Suction cups or screw mounted.

Part Number : 2131-1

BoatMates Cockpit Organizer

This easy to mount organizer holds your fishing gear, binoculars, or personal items. Keeps baits, pliers, fillet knife safe and organized. Mounts on a flat surface. Great for small boats with limited cockpit storage.

With a new all-resin design, the cockpit organizer won’t rust or corrode. Its injection molded, commercial grade resin provides superior durability and an attractive appearance.

The holder can be mounted with Tempress’ Super-Suction cups or screw mounted.

Part Number : 2133-1

Boaties Mate GPS / Cell Caddy

Compact organizer holds most hand-held GPS unit’s, and cell phones. The essential tech caddy for all boating enthusiasts. Mounts on a flat surface. Great for small boats with limited cockpit storage.

With a new all-resin design, the GPS/Cell caddy won’t rust or corrode. Its injection molded, commercial grade resin provides superior durability and an attractive appearance.

The holder can be mounted with Tempress’ Super-Suction cups or screw mounted.

Part Number : 2134-1

73 Chandlery - Removable Storage

Boaties Mate Trash Stasher

The perfect solution for keeping the cockpit or cabin ship shape, and trash out of the water. Easy to mount resin frame has a hinged cover to keep the contents from spilling out, and insects from creeping in. Quickly mounts on any smooth surface with three super suction cups, or can be permanently mounted with screws. Uses the typical supermarket shopping bag

Part Number : 2132-1

BoatMates Pedestal Cooler Bag

Unique half-round design fits under and around most pedestal style seats in cruisers, fishing boats and pontoons.

Features: Utilises space that is usually wasted on most boats. Hook and loop straps keep cooler secure to seat pedestal while non-skid feet prevent sliding across deck. Large capacity cooler holds 24 cans of your favorite beverage plus ice. Heat sealed thermal liner keeps beverages cold for up to 8 hours. Large mesh exterior pocket holds miscellaneous gear or personal items. Self-repairing zippers with molded pulls. Made from heavy 600D polyester with heat sealed insulated PVC liner. Quick release snaps on each side allows two coolers to be fastened back-to- back. Cushioned carry strap included.

Part Number : 3208-1

BoatMates Pedestal Gear Bag

Unique half-round design fits under and around most pedestal style seats in cruisers, fishing boats and pontoons.

Features: Hook and loop straps keep gear bag secure to seat pedestal, while non-skid feet prevent sliding. Gear Bag has plenty of interior space for tools, personal gear, fishing tackle, etc. Large removeable interior divider with additional pockets provides lots of organization possibilities. Two large mesh exterior pockets can hold small items that need quick access. Clear, zippered pocket on top is ideal for boat registration, or other documentation. Made from heavy 600D polyester with self-repairing zippers and heavy coated mesh pockets. Quick release snaps on each side allow two bags to be fastened back to back, or can be attached to our companion pedestal cooler.

Part Number : 3140-1

74 Chandlery - Removable Storage

Deluxe Bow bag for Inflatable Boats

The deluxe bow bag is manufactured with an exterior, water-resistant clear-view zippered pocket. It features twin front and full top nylon mesh storage areas, as well as interior security and storage pockets. The bag secures to the boat with included suction cups and adhesive.

Constructed from heavy-duty nylon mesh, the mesh bow bag allows water to drain. It comes with a full top section zipper for easy access and attaches to the boat with included adjustable shock cord fasteners.

Part Number : 70896

Te’ne’re’ Under Seat Storage Bag for Inflatable Boats

The Te’ne’re’ under seat storage bag from lalizas provides you with the extra storage space that is so necessary on any boat. It is made of PVC Tarpulin and has been designed to fit to any seat. It also features a shoulder strap which allows you to carry the bag when you leave the boat.

The top of the bag is padded to “soften the ride” on the wooden seat. It is water resistant, while the waterproof zipper keeps the storage area dry. It is in grey colour.

Dimensions: 600mm x 250mm x 190mm

Part Number : 70895

Stanchion Clip Holding straps

Ideal to fix a wind-surf or surf board, a sit-on-top or a wakeboard on the boats’ stanchions.

Plasticlip offers many advantages : Easy, quick and neat installation : no drilling required ; you can change the location of your equipment at any moment. Plasticlip adapts to various tube diameters (from 18.5 to 25.5 mm). It can be horizontally or vertically mounted.

Features: 2 Plasticlip, for any horizontal or vertical tube with a diameter from 18.5 to 25.5 mm. 2 x 2 m webbing straps with fix-lock. Supplied with screws and nuts.

Part Number : 37033

75 Chandlery - Accessories

Bathyscope Welcome Mat

Collapsible for easy storage Welcome Mat with backing, PVC Dimensions: 335mm (ext diameter) X Available in grey or blue and in a larger 600 x 900 (Blue Only) 510mm (H) Dimensions: 400 x 600mm and 600 x 900mm (Blue Only)

Part Number : 0800 Part Numbers : 57195 - Grey (400 x 600mm) 57196 - Blue (400 x 600mm) 57198 - Blue (600 x 900)

Ski Rope and Handle

Quality handle with good grip Alloy Coated Handle Handle can be detached so rope can be used for towing water toys Illuminated Chart Magnifier

Specifications: Chart Magnifier with built-in light. Overall length 22.8m (75ft) 65mm Long Rope dia 6mm (1/4”) Requires 2 x AA Batteries (not included) Floating Handle Part Number : 91521 Part Number : 71020-01

Vacuum Cleaner ‘Sea Power’ 12V

This small sized vacuum cleaner is ideal for cleaning the interior of boats and cars. Includes a 5m power cord with 12V lighter plug, a standard wide-mouth attachment for cleaning furniture and a crevice attachment. Vacuum Power is 15mbar.

Features: DC 12V Vacuum Power: 1500Pa Power Source: 12V cigarette lighter Plug Accessories Included: standard wide-mouth attachment & crevice attachment

CE Rated

Part Number : 31403

76 Chandlery - Accessories

Brass Porthole Mirror Fold Away Aluminium Trolley

Polished Solid Brass Ships Porthole Style Mirror. This lightweight aluminium trolley will make quick work of items that need to be transported. When completely folded, it is easy to An attractive accent piece for hallways, bathroom or any carry and transport and makes this hand trolley ideal for the boat, smaller spaces. caravan or home.

*A nautical classic • Lightweight aluminium frame *Cast of heavy solid brass • Easily folds compactly away for storage *Lacquered highly polished solid brass • Sturdy toe plate *Supplied with mounting screws • Toe plate and wheels open and close simultaneously *Features authentic riveted details and opens like an actual • Soft grip handle porthole • Max load: 60kgs • Comes with elastic fastening strap Dimensions: OA - 290mm (dia) Dimensions: Mirror only (dia) - 190mm Height when opened: 980mm Height when closed: 730mm Part Number : 91540-12 Width: 480mm Thickness: 60mm Toe Plate size: 248mm X 473mm Wheel Diameter: 168mm

Part Number : 72530

Teak Book Rack Plastic Clinometer Dimensions: Length: 397mm Stainless Steel ball in plastic tube Width: 217mm Height: 205mm Select from 2 models: 10-0-10 Degrees or 45-0-45 Degrees Part Number : 93334 Part Numbers: 70083 - 10-0-10 Degrees 70085 - 45-0-45 Degrees

Cork Key Ring Float

Part Number : 11905

Wind Indicator

Plastic direction vane with aluminium tube

Part Number : 70092 Measuring Jug

Measuring Jug - 200gr Great for Measuring Oil 58mm (OD) x 120mm (H)

Part Number : 2143

77 Chandlery - Bird Control - Bird Scare

Gullsweep Bird Scare Control

Gullsweep® is a simple and effective method for keeping birds of your vessel. Gullsweep® is an effective bird control and has been used around the world (for more than 40 years) to ward off flying critters that love to roost & mess on one’s boat. The primary objective of the Gullsweep® is to make gulls uncomfortable so they will select another roosting sight. Every bird has their predators and so they are always in a survival mode. Gullsweep® by its very unique nature creates that unknown fear that the moving object represents a potential danger. Thus with other alternative locations available, it is more suitable to go elsewhere.

Gullsweeps® are not expensive and can be easily mounted, dismounted and stored quickly when boating so that using several on a boat is very realistic and more effective.

Gullsweep has been used by Boaties around the world for more than 40 years to ward off flying pests that love to leave a putrid mess on your boat.

Gullsweeps are effective on boats, roof tops, jetties, navigation buoys and even on caravans.

78 Chandlery - Bird Control - Bird Scare

Standard 2m Gullsweep

* Eliminate cleaning time & unsightly stains * Easy to install (2 screws) or quick non-permanent mountings are available. * Doesn’t require any on board power * Works while you are away * Sweeps a full 6ft diameter & intimidates birds with it’s movement * Tested to perform in winds as high as 60 mph - but it is suggested you do not run boat with Gullsweep in place. Remove & store away. * To store away, fold in half and snap vanes on top of support rods.

Part Number : GULL-1

Hanging Gullsweep

Ideally suited for Sailboats where a line can quickly be deployed.

Ideal for hanging from a taut rope.Hang from rope strung between mast & fore or back stay.

The hanging Gullsweep® (model HGS-1) is easy to install. Tie a loop in the middle of a line securing one end to the mast and the other to the fore or back stay.

Line should be relatively tight so as to support a hanging Gullsweep (weighs 12 oz.), and give sufficient distance above the deck or boom and allow a minimum horizontal distance of 7 feet per Gullsweep® for the rotation diameter.

Your Hanging Gullsweep is ready to be hung. When attaching it to a line, be sure it is high enough and has sufficient room to rotate. The bottom eye on the support rod can be used to attach a light line which will assure the Gullsweep will not swing around in a heavy wind. This bottom straightening line should not be tight and could be secured around the boom to help stabilize the Gullsweep.

* Eliminate cleaning time & unsightly stains * Easy to install (2 screws) or quick non-permanent mountings are avalable. * Doesn’t require any on board power * Works while you are away * Sweeps a full 5 1/2ft diameter & intimidates birds with it’s movement * Tested to perform in winds as high as 60 mph - but it is suggested you do not run boat with Gullsweep in place. Remove & store away. * To store away, fold in half and snap vanes on top of support rods.

Part Number : GULL-H

Gullsweep Rail Mount

This mount is similar to a ‘G’ clamp and can be mounted on a bow rail or on a vertical pole such as a mast-head light.

For rails up to 40mm.

Part Number : GULL-RM

79 Chandlery - Brass Lamps & Bells

Cambrian Miners Safety Lamp Traditional Cargo Lamp

Solid Brass Polished Miners Lamp This large replica stands tall at 380mm and is a fully working. Burns either This is an authentic miner’s oil burning kerosene or paraffin. Wick assembly is safety lamp. Hand made from solid brass easily removed with convenient handle. and designed using the traditional Welsh Manufactured from solid brass and specification. This beautiful hand crafted copper. lamp makes an excellent gift. Solid brass miners’ lamps are easily engraved for a Dimensions: personal touch. 220 x 160 x 380mm (h) 460mm (h) oa including handle * Solid polished brass * Internal gauze Part Number : WP802 * 250mm height 85mm diameter base * Net weight 1.45 kg * Oil Container Capacity 150cc * Operating time is approx 8 hours * External lever for wick adjustment

Part Number : WP800 Brass Kerosene Cabin Lamp

Attractive traditional styled brass kerosene lantern. Lacquered Brass Made up of three parts which fit together: Kerosene Lamp A. Outer support frame and housing B. Wick assembly and fuel holder. This can be removed and This lamp is specifically designed for operated separately without frame if need be. boats. It features a four-way gimbal C. Glass chimney system that helps this lamp keep upright in any sea condition. A smoke Fully functional. cover is included to prevent soot from Complete with carrying hook so can be blackening anything mounted overhead. carried or hung on a hook.

Dimensions: 300mm (h) x 120 (dia) Dimensions with carrying hook riased (H) 280mm x (W) 120mm (D) 160mm Part Number : 91502 Part Number : 91500 Heavy Duty Brass Ship Bell

Polished Brass Solid Brass

Part Numbers : 15085-01 - 6” (150mm) Diameter Ship Wheel Bell 15085-02 - 8” (200mm) Diameter Compliment your nautical theme with this solid brass bell. The bell is cast and is hand-polished. Bracket is easily mounted to the wall with screws.

Ships Bell Diameter: 75mm

Part Number : 91542 Polished Brass 6 “ (150mm) Diameter

Part Number : 15086

80

Cleaners & Polishes

83. Cleaners

Cleanall Concentrate Salt-Away 946ml Concentrate + Mixer Salt-Away 946ml Concentrate

84. GRUNT Cleaning Products & Polishers

GRUNT EMER GEL - 500ml Grunt SUPAWAX - Polish 500ml GRUNT KLENASHINE - 500ml

85. Emerkit Emergency Putty

Emerkit - Epoxy Emergency Kit Emerkit - Corkit - Aqua Emerkit - Corkit - Steel

86. Marine Lubricants

Inox Lanox MX4 Marine Lubricant

82 Cleaners & Polishes - Cleaners

Cleanall Concentrate

The name says it all. It works wonders when others won’t.

Excellent for Marine use as it is: Non-acidic, non abrasive, 100% Biodegradable, environmentally friendly. non_flammable, deoderises, safe and easy to use, M.A.F approved and is New Zealand made!

For best results wet area before applying/using clean all.

It has been successfully used as: Fibreglass Cleaner One Step Teak Cleaner Vinyl Cleaner Sail and Canvas Cleaner Inflatable Boat Cleaner Bimini Top Cleaner Bilge / Toilet Area Cleaner Shower Cleaner Galley Cleaner Fender and Buoy Cleaner Engine Compartment Cleaner

Part Numbers: CLEANALL 01L - 1 Litre Bottle CLEANALL 05L - 5 Litre Bottle CLEANALL 20L - 20 Litre Container Salt-Away 946ml Concentrate + Mixer

Comes with the universal quick connector that attaches to your standard hose and motor flushers connections. Mixing and washdown will now be a breeze and you can just buy the refills after you have purchased this combo.

Why use Salt-Away?

*Salt-Away combined with our Auto-Mix unit speeds up your cleaning time by at least 50% *Removes all traces of salt, minimizing the corrosive effects of salt on your engine, trailer, vehicle, rods and reels. *Salt-Away is the most concentrated; Just 40mls is all you need to clean your boat, motor, trailer and all your fishing gear. Financially that works out to be from as little as $1.15 per wash. *Salt-Away is the best value for money - 1 litre of concentrate makes 512 litres. *Salt-Away, unlike some competitor products available is completely safe on all metals (including magnesium alloy), rubber and plastics, so won’t harm your marine equipment. 100% money back guarantee

Salt-Away is recommended by leading Engine Manufacturers, and is used by Royal NZ Navy, NZ Coastguard and NATO

Part Number: CLSALTM

Salt-Away 946ml Concentrate

Mixes up to 512 parts water to one concentrate.

Thats 480 Litres !!

Salt-Away is recommended by leading Engine Manufacturers, and is used by Royal NZ Navy, NZ Coastguard and NATO

Part Number: CLSALT 83 Cleaners & Polishes - GRUNT Products

GRUNT Cleaning Products & Polishers

The Grunt range of marine cleaning and polishing products will restore your vessel or car to its original pristine condition. Easy to apply the Grunt range is proven to work.

GRUNT EMER GEL - 500ml

Rust,Stain and Oxidation Remover

Removes heavy weathering and oxidation, rust and other stains from fibreglass gelcoat, lacquer and enamel surfaces quick as a flash. Although EMERGEL was first used on boats, it is very suitable for removing rust stains and heavy weathering from cars, caravans, motorhomes etc EMERGEL has countless uses.

EMERGEL is a unique product in a gel form that can be applied safely to any flat, curved or vertical surface. It will rapidly remove rust stains, ball point, pencil stains and many other types of stains from fabric, metal, masonry, porcelain, enamel, fibreglass and wood without affecting fast dyes and paint pigments. Rust and water stains on sails, carpet, clothes,sinks, benches, baths, showers and appliances can all be cleaned with EMERGEL.

Part Number: CLEMERG

Grunt SUPAWAX - Polish 500ml

Protects fibreglass gelcoat and enamel from damage by the hot summer sun, rains, salt water, dirt and grime, and provides a superlative shine for up to 6 months. Just wipe on SUPAWAX with a damp cloth right around your boat or car in one application, then simply polish off with a soft, clean rag.

SUPAWAX will help protect the finish against U.V rays from the sun, dirt, grime, droppings etc giving an unmatched wax shine. SUPAWAX will also help protect your boat against chalking, marine growths, and waterline scum. SUPAWAX can be applied in direct sunlight.

Part Number: CLWAX

GRUNT KLENASHINE - 500ml

Oxidation Remove and Restorer

Revitalises and restores fibreglass gelcoat, lacquer and enamel surfaces that have an oxidation or light weathering haze to cloud their original shine. KLENASHINE is very easy to apply with a damp cloth. Cover your boat or car with one application, then simply wipe off with a soft cloth.

KLENASHINE cleans and shines all oxidised paint finishes and gelcoat surfaces on your boat, car, van, truck, caravan, motorcycle, vintage car etc. KLENASHINE can be applied in direct sunlight which makes it a quick easy one shot, easy application clean up.

Part Number: CLSHINE

84 Cleaners & Polishes - Emerkit Putty

Emerkit Putty

* Easy to use, mix 1:1 * Water clean-up * Will not run or drip * Cures in or out of water * Non-conductive * Zero shrinkage, Inert when set * Sets like concrete - in or out of water , including salt water!

Adheres to: Concrete , Aluminium , Metal , Timber , Fiberglass Porcelain , & Most Rigid Plastics

Emerkit - Epoxy Emergency Kit

White 150g pack

Contains Resin and Hardener which need to be mixed at 1:1 ratio.

Part Number: EMERKIT

Emerkit - Corkit - Aqua

Emerkit Corkit is a two-part epoxy compound in a 114g single stick form that will cure hard in minutes.

Corkit will adhere to a wide range of surfaces often eliminatin expensice repairs.

Corkit can be shaped, drilled, sanded, painted and machined as desired.

*Aqua Corkit - Secures permanent repairs in wet or damp conditions and is used to to repair pools, wooden boat decks and hulls, fittings, pipes, electrical connections, battery cases, scratched, cuts, gouges and holes. Work Time 10 minutes.

Sets Off White

Keeps your boat afloat and your pool full

Part Number: CORKIT

Emerkit - Corkit - Steel

Emerkit Corkit is a two-part epoxy compound in a 114g single stick form that will cure hard in minutes.

Corkit will adhere to a wide range of surfaces often eliminatin expensive repairs.

Corkit can be shaped, drilled, sanded, painted and machined as desired.

*Steel Corkit - Inherits industrial strength and chemical resistant properties and is used to repair fuel tanks, radiators, gaskets, pipes, castings, prototypes, tools, stripped threads and anchor bolts.

Sets Black

Your mobile toolbox fix-all-kit

Part Number: CORKIT STEEL 85 Cleaners & Polishes - Marine Lubricants

Inox Lanox MX4 Marine Lubricant

Designed for heavy industrial, mining, farming, marine, earth moving and transport type use and where extreme climatic and high humidity conditions prevail.

Lanolin is a natural wax found in animal wool especially the wool from sheep, commonly referred as ‘WOOL FAT’ or ‘WOOL GREASE’, it has wide spread uses, cosmetics, medical, soaps, etc. Down through the centuries the Egyptians, Romans, Vikings, sailors and soldiers alike all used lanolin as a very effective anti- corrosion and waterproofing agent for a variety of metals, materials, timbers, to protect sails, leather, cannons, etc. Although we make INOX, a quality anti-corrosion lubricant, there are areas where a lanolin based anti-corrosion lubricant like LANOX is sometimes better suited for the application at hand.

*LANOX is a heavy duty anti-moisture, anti-corrosion lubricant made with a high grade lubricating oil and lanolin base with specialized chemical compounds. *LANOX contains no silicon, kerosene, acids or dieselene. *LANOX is harmless to metal points & surfaces, plastics, painted & enamel finishes, fibreglass, formica, rubber or neoprene seals. *LANOX doesn’t become sticky, gooey or gum up. *LANOX is non-conductive, non-static & non-corrosive. *LANOX has neutral properties, low flammability (NON-AEROSOL)

Part Number: INOX LANOX 300G

86 87 Clothing & Bags

91. Shoes/Boots 92. OVERBOARD -

Long-Leg Tie-Top Sailing Boots Dry Bags & Deck Shoes - Skipper Classic Sportive Deck Shoes Phone Covers 100% Waterproof Phone Cases 100% Waterproof Tech / Tablet 90. Gloves & Cases 100% Waterproof MP3 Cases Clothing 100% Waterproof Camera Cases

100% Waterproof VHF Cases Lalizas Sailing Fleece Vest Pro-Sports Waterproof Belt Pack Full Finger Gloves, Neoprene Waterproof Ipad Pod 5 Finger Cut Sailing Gloves - Fixed Rail Mount for Ipad Pod AMARA Waterproof Dry Pouches Lalizas Sailing Cap 20 Litre Kayak Deck Bag Waterproof Earphones 91. Bags Waterproof Dry Tubes Waterproof Backpacks Sailing Bag with Shoe Waterproof SLR Camera Bag Compartment Carbon Waterproof Range Sailing Bag Waterproof Waist Packs Sailing bag with wheels A4 Waterproof Map Pouch Waterproof Duffel Bags Waterproof Ninja Duffel Bag

88 Clothing/Apparel - Shoes & Boots

Long-Leg Tie-Top Sailing Boots

Smartly designed LALIZAS Long Leg Sailing Boots are perfect for sailing. Constructed from natural rubber with razor cut non-slip soles for better traction. Hard wearing with extra toe and heel reinforcement. The tie top feature and cushioned leg top render them extremely comfortable to wear. Available in navy blue with contrasting white trim.

Part Numbers : 40434 - Size 41 INT / 8 UK / 8.5 US 40435 - Size 42 INT / 8.5 UK / 9 US 40436 - Size 43 INT / 9.5 UK / 10 US 40437 - Size 44 INT / 10 UK / 10.5 US 40438 - Size 45 INT / 11 UK / 11.5 US 40439 - Size 46 INT / 12 UK / 12.5 US

Southern Ocean Long-Leg Tie-Top Sailing Boots

Southern Ocean Long Leg Sailing Boots are perfect for sailing. Constructed from natural rubber with razor cut non-slip soles for better traction. Hard wearing with extra toe and heel reinforcement. The tie top feature and cushioned leg top render them extremely comfortable to wear.

Part Numbers : SOB5 - Size 38 INT / 4 UK / 5 US SOB6 - Size 39 INT / 5 UK / 6 US SOB7 - Size 40 INT / 6 UK / 7 US SOB8 - Size 41 INT / 7 UK / 8 US SOB9- Size 42 INT / 8 UK / 9 US SOB10 - Size 43 INT / 9 UK / 10 US SOB11 - Size 45 INT / 10 UK / 11 US SOB12 - Size 46 INT / 11 UK / 12 US SOB13 - Size 47 INT / 12 UK / 13 US

Deck Shoes - Skipper Classic

Cruise in style with Lalizas Deck Shoes “Skipper”. Designed to provide comfort and durability, they are ideal for use at all times, while travelling at sea, or going for a stroll on land.

The “Skipper” shoes are hand-sewn and made from premium Mexican leather with rawhide lacing. Their non-slip rubber outsole has a special design so as to offer maximum traction and safety on any wet and slippery surface, such as decks and docks. Their classic moccasin design allows a perfect fit to your own foot’s bone structure. These versatile shoes are available in brown colour with brown outsole.

Part Numbers : Size 41 - 40577 , Size 42 - 40578 , Size 43 - 40579 , Size 44 - 40580 , Size 45 - 40581 , Size 46 - 40582

89 Clothing/Apparel - Gloves & Hats

Sportive Deck Shoes

Lalizas Deck Shoes offer style and comfort, while meeting your boating needs.

Designed to offer you extra traction and stability so that you have a good grip on wet surfaces. It features air mesh panels for greater breathability, quick dry footbed and a non-slip TPR outsole that will keep you manoeuvring fast on your feet, even on wet a deck.

Part Numbers : Size 36 - 70918 , Size 37 - 70919 , Size 38 - 70920 , Size 39 - 70921 , Size 40 - 70922 , Size 41 - 70923 , Size 42 - 70924 , Size 43 - 70925 , Size 44 - 70926 , Size 45 - 70927

Lalizas Sailing Cap

Available in Blue

Part Number : 40060

Lalizas Sailing Fleece Vest

The Lalizas Sailing Fleece Vest is a must for you, for those cold days on the boat.

It is made of microfibre on the outside and fleece on the inside in order to keep your body warm. Additional features which are worth noting are the two hand pockets and the adjustable waist strings.

Sizes fit snuggly, so choose the next size up if unsure.

Part Numbers : 40554 - Large 40555 - Extra Large

Full Finger Gloves, Neoprene 5 Finger Cut Sailing Gloves - AMARA

Full finger “Pro Race” gloves are your essential allies against cold Our recommendation for best buy value. Made of very soft and wind in water sport activities. Amara, with elastic spandex back and padded palm. Your hands are sealed with 3:2mm neoprene thickness for Our Amara sailing gloves offer comfort and durability for light protection and flexibility in cold waters. Your palm and fingers are work on the boat. covered with smooth Amara leather for excellent grip of ropes, fishing guns, paddles and other sea-sport equipment. Part Numbers : 40095 - Small Part Numbers : 40096G - Medium 70571 - Small 40097 - Large 70572 - Medium 40098 - XL 70573 - Large 70574 - XL

90 Clothing/Apparel - Bags

Sailing Bag with Shoe Compartment

This Lalizas bag has been designed for extensive use. It is made of durable 600 Denier Ripstop Polyester/PVC. Its dimensions allow you to carry many items in its main compartment and in an additional one at the bottom of the bag, suitable for storing shoes. It has a detachable shoulder strap as well as plastic grips on the handle straps, for easier and more comfortable carriage.

Dimensions: 530mm (L) x 430mm (W) x 530 (H)

Part Number : 40908

Sailing Bag

Lalizas Sailing Bag is made of durable 600 Denier PVC coated waterproof Ripstop polyester. The bag is light in weight making it the ideal choice for any usage.

Featuring: 1 main compartment, 1 main side compartment, 2 side compartments, lockable zip, handle straps and detachable shoulder strap.

Dimensions: 85cm(l) x 28cm(h) x 36cm(w)

Part Number : 40907

Sailing bag with wheels

For those wanting to keep their travel essentials organised, the large crew bag is ideal. Made of 600 Denier PVC coated Ripstop polyester it offers great water protection.

Storage isn’t a problem with two heavy-duty wheels taking the strain of larger loads. Featuring 1 main compartment, 1 front compartment, 2 side compartments, lockable zip, detachable shoulder strap, carry handles and extendable pull handle.

Bag Dimensions: 780mm (l) x 280 (h) x 360 (d)

Part Number : 40906

91 100% Waterproof IPhone Cases

Thanks to a transparent front and LENZFLEX back for ultra clear photos, you can browse, chat or snap away while our 100% waterproof Slide Seal System™ ensures your phone is fully protected inside the waterproof phone pouch.

Compatible with all small phones (including iPhones, Blackberry phones and HTC desires), the small OverBoard Waterproof Phone Case is also guaranteed submersible to 19ft / 6m so you can drop it in the water without paying for it.

Now all you’ve got to do is decide if you want it in Aqua or Black.

*Slide Seal System *Waterproof and submersible to depth greater than 12ft* (maximum depth of 19ft for all overboard cases) *Make and take phone calls when phone is sealed in waterproof phone pouch *Keeps out dust, sand, dirt and water

Part Numbers : OB1008A - Small Phone Case - Aqua OB1008BLK - Small Phone Case - Black

100% Waterproof Smart Phone Cases

Thanks to a transparent front and LENZFLEX back for ultra clear photos, you can browse, chat or snap away while our 100% waterproof Slide Seal System™ ensures your phone is fully protected inside the waterproof flip phone case.

The large OverBoard Waterproof Phone Case is also guaranteed submersible to 19ft / 6m so you can get creative with some underwater photography.

Browse the web with this phone case as it is designed to accomodate the latest Smart phones with larger screens. It features a larger window and is compatabile with; Samsung Galaxy S3, Nokia Lumia 920, BlackBerry Curve 3G 9300.

Now all you’ve got to do is decide if you want it in Aqua or Black.

*Slide Seal System *Waterproof and submersible to depth greater than 12ft* (maximum depth of 19ft for all overboard cases) *Make and take phone calls when phone is sealed in waterproof phone pouch *Keeps out dust, sand, dirt and water

Part Numbers : OB1065A - Large Phone Case - Aqua OB1065BLK - Large Phone Case - Black

92 100% Waterproof PSP / GPS Cases

Super-versatile, this product works as a waterproof GPS case, a waterproof PSP case, or a waterproof phone case for large and flip phones. Perfect for water-based sports, it protects devices from water and dirt while allowing full use of the controls.

The OverBoard Waterproof GPS / PSP Case is guaranteed submersible to 19ft / 6m, so you can even try your hand at some underwater gaming!

Our 100% waterproof Slide Seal System™ ensures your device is fully protected inside the waterproof GPS case, while the transparent front means you still have full use of it.

So whether you’re into underwater & onboard gaming, or need full use of your handheld GPS or phone in wet conditions; this waterproof case covers all three.

*Slide Seal System *Waterproof and submersible to depth greater than 12ft* (maximum depth of 19ft for all overboard cases) *Transparent front window allowing full use of device features *Keeps out dust, sand, dirt and water

Part Number: OB1009BLK - Large GPS / PSP / Phone Case - Black

100% Waterproof Camera Cases 100% Waterproof VHF Cases

- Slide Seal System - Slide Seal System - Waterproof and submersible to depth greater than 12ft - Waterproof and submersible to depth greater than - (maximum depth of 19ft for all overboard cases) 12ft - (maximum depth of 19ft for all overboard cases) Part Numbers : OB1052BLK - Zoom Lens Camera Case Part Numbers : OB1025BLK - Camera case OB1035BLK - Small VHF Case OB1036BLK - Large VHF Case

93 100% Waterproof MP3 Cases

A must-have for all water sports enthusiasts who never like to be without their favourite tunes, this heavy duty padded waterproof iPod case lets you take them on the water and will keep players free of dirt and sand as well.

A tough and fully adjustable Velcro sports arm strap gives you maximum movement, while the transparent front window allows full use of all touch screen controls and functions.

Don’t worry if things get active, thanks to our 100% waterproof Slide Seal System™ this case can take a dunking and is guaranteed submersible to 19ft / 6m, plus it will float if dropped in the water.

The OverBoard Waterproof iPod Case is specially designed to protect your iPod, but will also fit many similar-sized and smaller MP3 players, as well as iPhones.

From windsurfing & kitesurfing to kayaking & swimming or just lazing around the pool or on the beach; our waterproof MP3 case lets you add a whole other dimension to the experience.

Available in Black or White.

*Slide Seal System *Waterproof and submersible to depth greater than 12ft* (maximum depth of 19ft for all overboard cases) *Make and take phone calls when phone is sealed in waterproof phone pouch *Keeps out dust, sand, dirt and water

Part Numbers : 100% Waterproof Tech / Tablet Cases OB1027BLK - Pro-Sports MP3 case - Black OB1027WHT - Pro-Sports MP3 Case - White *Slide Seal System *Waterproof and submersible to depth greater than 12ft Waterproof Earphones *(maximum depth of 19ft for all overboard cases)

Compatible with all music players, these 100% waterproof Part Numbers : earphones boast a comfortable in-ear design with Small, Medium OB1073F - Multipurpose Jumbo Case and Large silica gel ear buds so you can find the perfect fit. OB1086BLK - iPad Case

Our waterproof earphones are also guaranteed to a depth of 19ft / 6m and are recommended for use with our OverBoard Waterproof MP3 Case.

Get them in Black or White.

Technical Specs: Frequency Response: 19Hz - 20 kHz Imepdance: 32 Ohm Sound Pressure Level: 100db (1kHz/1Vrms) Audio Jack Plug: 3.5mm stereo

Part Numbers : OB1038BLK - Black OB1038WHT - White

94 Pro-Sports Waterproof Belt Pack

Designed to take your valuables with you in all conditions, the OverBoard Waterproof Belt Pack is 100% waterproof, super hardwearing and can be worn around your waist.

1 x Black Waterproof Belt Pack 1 x Removable Waist Belt (fits up to 49” waists) 1 x Caribineer Clip 1 x Neck Lanyard 1 x Moisture Sensitive Desiccant Sachet 1 x Instructions / Care Guide

Part Number : OB1050

Waterproof Ipad Pod

Mount your iPad safely on your boat so it can be used in any weather conditions, whether fixed to your deck or mounted at the helm. Compatible with the OverBoard waterproof iPad case and allows integration with your on-board systems and marine electronics. Engineered by MarinePod with a quick attachment system.

Features:

*Compatible with OverBoard Waterproof iPad Cases *Easily secures to your boat deck, helm or grab rail (Rail Mount sold separately) *Use your iPad out on deck in all weather conditions *iPad case and mount compatible with iPad, iPad 2 or iPad 3

Dimensions: Length: 325mm Width: 250mm Depth: 35mm

Pod support only.

Part Number : 1000

Fixed Rail Mount for Ipad Pod

Stainless Steel Fixed Rail Mount for use with the Waterproof Ipad Pod (part number 1000) Attach to the rail of your boat and can be used in a landscape or portrait orientation. Fits most standard rail sizes.

Dimensions: Width: 50mm Length: 58mm Depth: 50mm

Part Number : 1001

95 Waterproof Dry Pouches

Waterproof so when done up tight it will float or can handle quick submersions

Part Numbers : OB1015R - 1 Litre Dry Pouch - Red OB1015B - 1 Litre Dry Pouch - Blue OB1015Y - 1 Litre Dry Pouch - Yellow OB1015BLK - 1 Litre Dry Pouch - Black

20 Litre Kayak Deck Bag

Stylish and practical, our Yellow roll-top kayak deck bag will sit rock tight on your kayak deck through six easy side buckle connectors, keeping your gear bone dry on all your kayaking missions.

Our waterproof kayak bag is constructed from sturdy & easy to wipe clean PVC tarpaulin and seals tight with our easy to use Fold Seal System™. Add to that welded seams and you’ve got a waterproof kayak bag that can handle any rapid! And if you do drop it in the water, this highly visible Yellow kayak bag will neatly float to the top so you can get it back easily.

Apart from being totally waterproof, our kayak deck bag also features a removable shoulder strap for easy transportation, plus a front weatherproof accessories/document pocket and storage webbing to easily store & locate smaller items.

Part Number : OB1094Y - 20 Litre Kayak Bag Yellow

Waterproof Dry Tubes

Waterproof so when done up tight it will float or can handle quick submersions. Shoulder Strap included with all dry tube bags

Part Numbers : OB1001BLK - 5 Litre Dry Tube - Black OB1005P- 20 Litre Dry Tube - Pink OB1001Y - 5 Litre Dry Tube - Yellow OB1005BLK - 20 Litre Dry Tube - Black OB1003R - 12 Litre Dry Tube - Red OB1005Y - 20 Litre Dry Tube -Yellow OB1003Y - 12 Litre Dry Tube - Yellow OB1057Y - 20 Litre Window Dry Tube - Yellow OB1007Y - 40 Litre Dry Tube - Yellow

96 Waterproof Backpacks

No zips means no leakage, so this large rucksack has a seamless electronically welded construction, making it fully submersible.

*Floats. *Padded lumbar support and shoulder straps. *Adjustable chest and waist supports.

Part Numbers : OB1053Y - 20 Litre Backpack - Yellow OB1053BU - 20 Litre Backpack - Blue OB1054BLK- 25 Litre Backpack - Black OB1054BU - 25 Litre Backpack - Blue OB1096BLK- 30 Litre Pro-Sports Backpack - Black

Waterproof SLR Camera Bag

Take your SLR camera safely on all your adventures with our Waterproof SLR Camera Bag, featuring a handy adjustable shoulder strap and a protective inner lining.

Made of tough PVC tarpaulin, this waterproof camera bag seals tight thanks to our trusty Fold Seal System™ and with welded seams as well, it offers full protection from water, sand and dirt. Our waterproof SLR bag also floats when dropped in water so you can get a little clumsy without losing your expensive gear.

Storing and accessing smaller items is easy with a large internal wet/dry pocket and an elasticated mesh accessories pocket, while a reflective front patch offers extra visibility. Suitable for most SLR camera models.

Part Number : OB1087BLK

Carbon Waterproof Range Waterproof Waist Packs

Waterproof so when done up tight it will float or can handle Waterproof so when done up tight it will float or can handle quick quick submersions. submersions.

Part Numbers : Part Numbers : OB1047C - 32 Litre Carbon Backpack OB1049Y - 3 Litre Waist Pack - Yellow OB1046C - Carbon Roll-top Messenger Bag OB1049BLK - 3 Litre Waist Pack - Black

97 A4 Waterproof Map Pouch

Waterproof so when done up tight it will float or can handle quick submersions

Part Number : OB1081BLK - A4 Map Pouch

Waterproof Duffel Bags

The perfect bag for travel, sailing or water sports bag. If you need a bag…why not get a fully waterproof OVERBOARD and keep your gear dry.

Part Numbers : OB1089Y - 40 Litre Roll-Top Duffel - Yellow OB1089B - 40 Litre Roll-Top Duffel - Blue OB1012Y - 60 Litre Roll-Top Duffel - Yellow

Waterproof Ninja Duffel Bag

Our elite duffel bag is super tough military grade with heavy duty buckles and clips. Includes twin rubber handles at each end. This is the ultimate 100% waterproof duffel bag.

Part Number : OB1045BLK - 130 Litre Ninja Roll-Top Duffel - Black

98

Electrical - BEP Marine

Battery Switch BEP 32 Way “Cruiser Series” Yacht -10mm 101. Battery BEP 701 Battery Switch - Panel Circuit Breaker Panel - with Digital BEP Insulated Dual Studs - 6mm Distribution Mount Meter BEP Insulated Dual Studs -10mm BEP 701-S Mini Battery Selector BEP 36 Way “Cruiser Series” & 8mm BEP 12V Dual Battery Switches Switch Launch Circuit Breaker Panel - with BEP Insulated Dual Stud Cover with VSR and Emergency Parallel BEP 701-S Mini Battery Selector Digital Meter (6mm) BEP 714-140A Dual Battery Switch - Panel Mount BEP 28 Way Millennium Circuit BEP 702 Distribution Studs Selector with VSR BEP 700 Easy Fit Battery Switch Breaker Panel - with Digital Meter BEP 702 Dual Distribution Stud BEP Dual Battery Switches with BEP Double Pole Battery Switch BEP 32 Way Millennium Circuit BEP 704 Distribution Stud Emergency Parallel BEP Key for 700 Switch Breaker Panel - with Digital Meter BEP Heavy Duty Distribution Bus BEP Twin BEP Key for 700 Switch BEP 44 Way Millennium Circuit - 300A BEP Twin Outboard 140A DVSR BEP 720 Remote Operated Breaker Panel - with Digital Meter BEP Heavy Duty Distribution Bus Battery Distribution Cluster - Three Motorised Emergency Parallel BEP 56 Way Millennium Circuit - 500A Battery Banks Switch Breaker Panel - with Digital Meter BEP Ammeter Shunt Enclosure BEP Twin Inboard 140A DVSR BEP 701 Dual Operation VSS and BEP Contour Connect Circuit BEP Terminal Blocks Battery Distribution Cluster - Three Emergency Parallel Switch Protection Module BEP Bus Bars Battery Banks BEP DVSR 140 Amp - 12/24 Volt BEP Contour Connect Circuit BEP Dual Bus Bars BEP Triple Outboard 140A DVSR BEP Key Switch Control for MD Breaker Module BEP Bus Bar - 150Amps Battery Distribution Cluster - Four Motorised Switches BEP Contour Connect Push to Reset BEP Bus Bar Covers Battery Banks BEP Remote Emergency Parallel and Toggle Circuit Breaker Module BEP Contour Heavy Duty Circuit BEP Contour Connect Battery Switch for MD Motorised Switches Breakers Distribution Panel with VSR- Single BEP 707 Circuit Breaker Module Engine Two Battery Banks 121. Switch Panels BEP Fuse holder Heavy Duty BEP Contour Connect Battery 112. DC Circuit BEP 24 hour Essential Circuit BEP 3 Way Spray Proof Switch Distribution Panel with VSR- Single Breaker Module (4W) Breaker Panels Panel Engine Two Battery Banks BEP 24 hour Essential Circuit BEP 4 Way Spray Proof Switch BEP Contour Connect Battery Breaker Module (2W) BEP 4 Way Circuit Breaker Panel Panel Distribution Panel with VSR- Twin Airpax Single Pole Circuit Breakers 900 BEP 5 Way Spray Proof Switch Outboard Three Battery Banks BEP Surge Protection Module BEP 8 Way Circuit Breaker Panel Panel BEP Contour Connect Circuit BEP Terminal Blocks 901 BEP 6 Way Spray Proof Switch Protection Module BEP Heavy Duty ANL Fuses BEP 12 Way Circuit Breaker Panel Panel BEP 800-MS4 Battery BEP Digital Ammeter Shunt 902 BEP 6 Way Contour Spray Proof Management Panel - Single Engine BEP 16 Way Circuit Breaker Panel Switch Panel Two Battery Banks 904 BEP Micro Series BEP 800-MS1 Battery 130. Monitoring BEP 24 Way Circuit Breaker Panel BEP Contour Interior Switch - Management Panel - Single Engine 905 Single Systems Two Battery Banks BEP 32 Way Circuit Breaker Panel BEP Contour Interior Switch - BEP 800-MS2 Battery 906 Double BEP DC Systems Monitor (DCSM) Management Panel - Twin Engines BEP 12 Way Circuit Breaker Panel - BEP Contour Exterior Switch - BEP Ultrasonic Tank Sender - No Three Battery Banks with Analogue Meter Single Moving Parts BEP 800-MS3 Battery BEP 16 Way Circuit Breaker Panel - BEP Contour Exterior Switch - BEP LED Tank Level Monitor Management Panel - Twin Engines with Analogue Meter Double BEP Water Tank Sender Probe Kit Three Battery Banks (Large Diesel BEP 24 Way Circuit Breaker Panel - BEP 32111 - Toggle Switch BEP Gas Detector 600-GD Engines) with Analogue Meter BEP Splash Proof Boot BEP Gas Detector 600-GDL BEP 722 Electric Battery Switch BEP 32 Way Circuit Breaker Panel - BEP Gas Shut Off Switch 600-LPG 300 Amp with Analogue Meter Solenoid Valve and Regulator Kit BEP 721 Heavy Duty Battery BEP 32 Way Circuit Breaker Solenoid Valve Selector Switch Vertical Panel - with Analogue 124. Battery BEP Gas Detector with Built-In BEP 720 Heavy Duty On/Off Meter Sensor 600-GDRV Battery Switch BEP 48 Way Circuit Breaker Panel - Distribution BEP Gas Detector FD-2 BEP 720 Remote Operated with Analogue Meter Accessories Motorised Battery Switch with BEP 12 Way Circuit Breaker Panel - Optical Sensor with Digital Meter BEP Insulated Stud (single) - 6mm BEP 701-MD Remote Operated BEP 20 Way Circuit Breaker Panel - BEP Insulated Stud (single) - 8mm Motorised Battery Switch - with Digital Meter BEP Insulated Stud (single) - 10mm 275Amps BEP 24 Way Circuit Breaker Panel - BEP Insulated Stud Covers (10mm) BEP 701 Medium Duty On/Off with Digital Meter BEP Insulated Dual Stud linked 100 Electrical - Battery Bank Clusters

BEP 12V Dual Battery Switches with VSR and Emergency Parallel

An ideal replacement for a Battery Selector Switch. Just remove selector switch and connect existing wires to 716, no extra wires are required for a fully automatic battery management system. No more flat start batteries, protects electronics from harmful engine start spikes.

Dual Battery charging clusters For use on charging systems under 140A.

To be used in the following systems: 1. Single outboard dual battery bank 2. Single alternator inboard engine dual battery bank

Dimensions: 276L X 69W x 75H mm (horizontal & vertical) 138L X 138W x 75H mm (square)

Part Numbers : 716-H-140A-DVSR - Horizontal 716-V-140A-DVSR - Vertical 716-SQ-140A-DVSR - Square

BEP 714-140A Dual Battery Selector with VSR

The 714-140A-DVSR uses our new dual sensing 12 & 24 Volt VSR (710-140A). A welcome addition to the 701 selector switch it ensures you will always have a fully charged reserve battery. When the switch is in position 1 it becomes the sensing battery for the VSR. Battery 2 which is in isolation will be charged via the VSR when the engine is running ensuring it is always fully charged. When the switch is in battery 2 position this becomes the sensing battery and battery 1 is charged via the VSR. The fact that there is always a fully charged battery in reserve is a huge safety factor.

Dimensions: 138L x 69W x 75H mm

Please note: With this system the electronic loads are run off the same battery as the engine starting, which can be a disadvantage.

Part Number : 714-140A-DVSR

BEP Dual Battery Switches with Emergency Parallel

Suitable for use in the following systems: 1) Single outboard dual battery bank 2) Single alternator dual battery bank 3) Twin alternator dual battery bank

Dimensions: 207(L) X 69(W) x 75(H) mm

Part Numbers : 715-H (Horizontal) 715-V (Vertical)

101 Electrical - Battery Bank Clusters

BEP Twin Outboard 140A DVSR Battery Distribution Cluster - Three Battery Banks

This system is designed for twin outboard installations using outboards without AUX outputs. It will allow the port engine to charge the port start battery and the house battery when the VSR is engaged (refer VSR specs for operation of VSR.) It will also allow the starboard engine to charge the starboard start battery and the house battery when the starboard VSR is engaged, giving a combined charge from two outboards into the house battery until the voltage regulators on both engines control the charge. It will also allow the house battery to be charged if steaming on one engine.

Dimensions: 207L X 138W x 75H mm (8.2L X 5.4W x 3H”)

Part Number : 717-140A-DVSR

BEP Twin Inboard 140A DVSR Battery Distribution Cluster - Three Battery Banks

The 718-140A-DVSR is designed for twin inboard systems when it is not practical to have both engine alternators in parallel because of the types of regulators used on these alternators. The house battery is charged from the port engine when the VSR is engaged.

Dimensions: 207L X 138W x 75H mm (8.2L X 5.4W x 3H”)

Part Number : 718-140A-DVSR

BEP Triple Outboard 140A DVSR Battery Distribution Cluster - Four Battery Banks

The 719-140A-DVSR was designed through popular demand for our 717-140A-DVSR cluster. This system is designed for triple outboard installations. Once again using multiple VSR’s off each start battery giving combined charge from all 3 outboards into the house battery via VSR’s.

Dimensions:207L X 207W x 75H mm (8.2L X 8.2W x 3H”)

Part Number : 719-140A-DVSR

102 Electrical - Battery Distribution Panel

BEP Contour Connect Battery Distribution Panel with VSR- Single Engine Two Battery Banks

The CC-801 incorporates a version of our very successful 714 cluster. The CC-801 is supplied pre-wired with back cover fitted.

Consists of a BEP 701-S Battery Selector Switch and a VSR in a Panel mount option. Operations identical to 714-140A-DVSR.

It is supplied with a CC-J joiner to allow it to be combined with other modules.The CC-801 is supplied standard in charcoal with light grey wave strip.

Module dimension: 166mm(6.5”) L x 106mm (4.2”) W x 55mm (2.2”) D

Cutout dimension: 146mm (5.75”) L x 86mm (3.4”) W (single only)

Part Number : CC-801

BEP Contour Connect Battery Distribution Panel with VSR- Single Engine Two Battery Banks

The CC-802 incorporates a version of our very successful 716 single engine battery switch cluster.

Consists of three BEP 701 Battery Selector Switches and a VSR in a Panel mount option. Operations identical to 716 range.

The CC-802 is supplied loosely assembled with links and joiners to allow it to be assembled in either the vertical or horizontal orientation as shown in illustrations. Full wiring instructions are supplied to allow pre-assembly for both applications.

Overall Dimension (Vertical): 166mm(6.5”) L x 212mm (8.4”) W x 55mm (2.2”) D.

Cutout dimension (Vertical): 146mm (5.75”) L x 192mm (7.6”) W

Part Number : CC-802 Virtical: 166W x 212H x 55D mm

Horizontal: 332W x 106H x 55D mm

103 Electrical - Battery Distribution Panels

BEP Contour Connect Battery Distribution Panel with VSR- Twin Outboard Three Battery Banks

The CC–803 incorporates a version of our very successful 717 dual engine battery switch cluster. The CC–803 is supplied with cables to allow different configurations. The components can also be easily removed and reconfigured if the factory layout does not suit your application.

Consists of four BEP 701 Battery Selector Switches and a VSR in a Panel mount option. Operations identical to 717 range.

Overall Dimension: 166mm(6.5”) L x 318mm (12.5”) W x 55mm (2.2”) D

Cutout Dimension: 146mm (5.8”) L x 298mm (11.7”) W

Part Number : CC-803

BEP Contour Connect Circuit Protection Module

The CC-805T is supplied pre-wired and fitted with one 701PM battery switch, 2 x 10amp and 2 x 15amp toggle circuit breakers. Supplied with SET-CC-1 label sheet and back cover to enclose exposed terminals.

Module dimension: 166mm(6.5”) L x 106mm (4.2”) W x 55mm (2.2”) D

Cutout dimension: 146mm(5.75”) L x 86mm(3.4”) W

Part Number : CC-805T

BEP 800-MS4 Battery Management Panel - Single Engine Two Battery Banks

The 800-MS4 panel is designed for sail boats up to 14m (46’) and power boats up to 10m (32.9’) with single engines.

800-MS4 is supplied with a 702 negative stud. Also supplied with a full label set for panel circuit breakers.

Features: *Essential circuits, 24 hour supply *Mains breakers for control panels, davit winches, or treatment systems *Heavy duty breakers for anchor winches *Powder coated aluminium panel *Spare positions for additional battery switches and circuit breakers for extras such as radio batteries and genset batteries

Dimensions: 160H x 239W x 75D (6.3H x 9.4W x 2.9D”) Part Number : 800-MS4

104 Electrical - Battery Distribution Panels

BEP 800-MS1 Battery Management Panel - Single Engine Two Battery Banks

The 800-MS1 Panel is designed for power or sail boats 10 to 12m(32.9 to 39.5’) with single engines.

Panels are supplied with a BEP 703 heavy duty negative bus, to accommodate all negative connections at the battery. Also supplied with a full label set for panel circuit breakers.

Features: *Essential circuits, 24 hour supply *Mains breakers for control panels, davit winches, or treatment systems *Heavy duty breakers for anchor winches *Powder coated aluminium panel *Spare positions for additional battery switches and circuit breakers for extras such as radio batteries and genset batteries

Dimensions: 260H x 351W x 75D mm (10.25H x 13.8W x 2.9D”) Part Number : 800-MS1

BEP 800-MS2 Battery Management Panel - Twin Engines Three Battery Banks

The 800-MS2 Panel is designed for power boats 10 to 12m (32.9 to 39.5’) with twin engines.

Panels are supplied with a BEP 703 heavy duty negative bus, to accommodate all negative connections at the battery. Also supplied with a full label set for panel circuit breakers.

Features: *Essential circuits, 24 hour supply *Mains breakers for control panels, davit winches, or treatment systems *Heavy duty breakers for anchor winches *Powder coated aluminium panel *Spare positions for additional battery switches and circuit breakers for extras such as radio batteries and genset batteries

Dimensions: 281H x 463W x 75D mm (11.1H x 18.25W x 2.9D”) Part Number : 800-MS2

BEP 800-MS3 Battery Management Panel - Twin Engines Three Battery Banks (Large Diesel Engines)

The 800-MS3 Panel is designed for power boats 12 to 16M(39.5 to 52.5’) with larger diesels.

Panels are supplied with a BEP 703 heavy duty negative bus, to accommodate all negative connections at the battery. Also supplied with a full label set for panel circuit breakers.

Features: *Essential circuits, 24 hour supply *Mains breakers for control panels, davit winches, or treatment systems *Heavy duty breakers for anchor winches *Powder coated aluminium panel *Spare positions for additional battery switches and circuit breakers for extras such as radio batteries and genset batteries

Dimensions: 380H x 463W x 95D mm (15H x 18.25W x 3.75D”) Part Number : 800-MS3 105 Electrical - Heavy Duty attery Switches

BEP 722 Electric Battery Switch 300 Amp

The 722 Electric Battery Switch fills a need on larger boats where cable runs are becoming excessive and as a result voltage drop is a concern. The switch is placed as close as possible to the batteries, and a short run of cable from the start batteries to the starter motor. This can be remotely switched from any convenient position in the boat utilising a key switch, Part No. 722-KS, which is an optional extra.

The 722-300A Electric Battery Switch is also available in a non-electronic format. The 722-NE-300A can be operated by any (On) Off (On) momentary switch. A LED indicates whether switch is on and has a manual over-ride as in the electronic version.

Specifications: * Continuous Rating: 300 Amps DC * Intermittent Rating: 400 Amps DC * Cranking Rating: 1250 Amps DC * Voltage Rating: 12 or 24 Volts DC * Operation: On / Off * Mounting surface * Termination Stud Size: 2 x 10 mm (3/8 “) * Tin plated copper studs and nuts

Dimensions: 102 x 102 x 107(h) mm

Part Number : 722 BEP 721 Heavy Duty Battery Selector Switch

The BEP 721 is a heavy duty Battery Selector Switch and offers a simple economical way of separating two batteries.

* Continuous Rating: 350Amps DC between common B1 or B2 * Continuous Rating: 500 Amps DC between common B1 + B2 * Cranking Rating: 1500 Amps DC * Voltage Rating: up to 48 Volts DC * Operation: Selector-Battery 1-2-Both-off * Termination Stud Size: 3 x 10mm(3/8”) * Dimensions: 102 x 102 x 90mm(h)

Part Number : 721

BEP 720 Heavy Duty On/Off Battery Switch

The 720 Heavy Duty Battery Switch is rated at 600 amps continuous and 2500 amps cranking, making it well suited to larger vessels.

* Continuous Rating: 600 Amps DC * Cranking Rating: 2500 Amps DC * Voltage Rating: up to 48 Volts DC * Operation: On / Off * Termination Stud Size: 2 x 12 mm (1/2 inch) * Dimensions: 102 x 102 x 90mm(h)

Part Number : 720

106 Electrical - Battery Switches

BEP 720 Remote Operated Motorised Battery

Switch with Optical Sensor

The 720-MDO Version 8 has new installation options, whereby the motor/circuit board can be fed from an independent 12V or 24V supply, so the switch contacts are fully isolated and can: * Control higher voltage circuits e.g. 36 or 48 volt circuits * Control negative cables in circuits (e.g. full remote isolation in metal hulled craft) * Ensure engine electronics are fully isolated from all other circuits * Still be operated in case the switched battery is flat

Part Number : 720-MDO

Note: Version 8 720-MDO’s can be identified by the 7 core connection cable with 3 cores terminated in the Wago plug, and 4 cores crimp-terminated.

BEP 701-MD Remote Operated Motorised Battery Switch - 275Amps

Due to the increased load requirements and large increases in the cost of copper battery cable, the MD range of battery switches allows you to install the battery switch very close to the battery, reducing cable lengths to starter motor. They are also ideal for remote isolation of bow thrusters.

Features: * Remote operation. * Battery switch can be mounted alongside battery, reducing cable lengths and cable sizes to starter motor. (Large cost saving in copper cables) * Reduced installation labour, due to shorter battery cable runs. * Manual over-ride option to meet CE requirements. * Power Draw: Switch off: 12mA. Switch on: 15 mA, switch operating 120 mA for 3 seconds @ 12 v nominal. * LED status identification for remote control switch. * Same capacities/specifications and mounting options as standard BEP battery switches.

Part Number : 701-MD

BEP 701 Medium Duty On/Off Battery Switch

* Continuous Rating: 275 Amp DC * Voltage Rating: up to 48 Volts DC * Termination Stud Size: 2 x 10mm (3/8 “) * Operation: On / Off * Dimensions: 69 x 69 x 75mm (h)

Part Number : 701

107 Electrical - Battery Switches

BEP 701 Battery Switch - Panel Mount

*Continuous Rating: 275 Amps DC *Intermittent Rating: 455 Amps DC *Cranking Rating: 1250 Amps DC *Voltage Rating: 48 Volts DC *Operation: On/Off *Mounting: Recessed or Surface *Ignition protected *Termination Stud Size: 2 x 10 mm (3/8 inch) *Dimensions: 69 x 69 x 75h mm (2.75 x 2.75 x 3h inches) *Tin plated copper studs and nuts

Part Number : 701-PM

BEP 701-S Mini Battery Selector Switch

The 701-S is the most compact selector switch on the market and offers a simple economical way of separating two batteries.

* Continuous Rating: 200 Amps DC * Cranking Rating: 1000 Amps DC * Voltage Rating: up to 48 Volts DC * Operation: Selector 1-2-Both_off * Termination Stud Size: 3 x 5/16” * Dimensions: 69 x 69 x 75mm (h)

Part Number : 701-S

BEP 701-S Mini Battery Selector Switch - Panel

Mount

The 701-S is the most compact selector switch on the market and offers a simple economical way of separating two batteries in a panel mount version.

*Continuous Rating: 200 Amps DC *Intermittent Rating: 300 Amps DC *Cranking Rating: 1000 Amps DC *Voltage Rating: 48 Volts DC *Operation: 1-2-Both-Off *Mounting: Recessed or Surface *Ignition protected *Termination Stud Size: 3 x 5/16” *Dimensions: 69 x 69 x 75h mm (2.75 x 2.75 x 3h inches) *Tin plated copper studs and nuts

Part Number : 701-S-PM

108 Electrical - Battery Switches

BEP 700 Easy Fit Battery Switch

The BEP 700 Easy Fit Battery Switch is designed to be recessed through panels up to 19mm thick, but can also easily be surface mounted.

* Continuous Rating: 275 Amp DC * Voltage Rating: up to 48 Volts DC * Termination Stud Size: 2 x 10mm (3/8 “) * Operation: On / Off * Dimensions: 69 x 69 x 110mm (h)

Part Number : 700

BEP Double Pole Battery Switch

720-DP Double pole battery switch has the same dimensions and features as the 720 battery switch. The 720-DP also meets the needs of vessels being built to survey requirements where positive and negative supplies must be isolated at the same time.

•Continuous Rating: 400 Amps DC •Intermittent Rating: 525 Amps DC •Cranking Rating: 1500 Amps DC •Voltage Rating: 48 Volts DC •Operation: On/Off two poles •Mounting: Recessed or surface •Termination Stud Size: 4 x 12mm (1/2”) •Tin plated copper studs and nuts SAFETY NOTE: •Dimensions: 102 x 102 x 90H (4 x 4 x 3.5H”) BEP recommends the 720-DP for isolating positive •Ignition protected and negative circuits. We do not recommend it for switching house and start battery systems at the Part Number : 720-DP same time. We recommend separate switches for house and start for safety reasons. You may need to isolate your engine battery in an emergency and not your house battery, which typically powers the communications.

BEP Key for 700 Switch BEP Key for 700 Switch

Replacement BEP key for 700 switch Replacement BEP key for 701 switch

Part Number : 700-KEY Part Number : 701-KEY

109 Electrical - Emergency Paralell & VSS Switches

BEP 720 Remote Operated Motorised Emergency Parallel Switch

The 720-MDO-EP (Emergency Parallel Switch) provides remotely activated, high current, emergency parallel connection of two battery banks for a 10 minute period following activation of the remote switch. The motorised battery switch allows the remote switch to be placed in a location convenient to the operator, with the battery switch positioned to minimise voltage drop, saving weight and installation cost.

*Continuous rating: 500 Amps DC -minimum 2x95mm² (2x 3/0) cables *Intermittent rating: 700 Amps DC -minimum 2x95mm² (2x 3/0) cables *Cranking rating: 2500 Amps DC -minimum 2x95mm² (2x 3/0) cables *Maximum Voltage: 32 Volts DC (12V or 24V systems) *Voltage Note: Both battery banks must be the same voltage, either 12V or 24V *Operating Voltage: 8 to 32.0 Volts DC *Operation: Manual On/Off, Auto On/Off *Mounting: Recessed or surface *Ignition protected: Meets UL 1107 standards *IP Rating: IP65 *Stud Size: 2 x 12mm (1/2”) *Materials: Tinned copper conductors/studs, stainless steel nuts, high temperature fibre reinforced plastics. *Power draw: Off/Auto Off: 5mA @12V, 5.5mA @24V *Auto On/On:8.0mA @12V, 12.0mA @24V *Emergency Parallel: *Remote switch activates parallel for 10 minute period. *Pressing remote switch for 6 seconds, deactivates parallel function

Dimensions: 102 L x 102 W x 110 H mm, (4 x 4 x 4.33”)

Part Number : 720-MDO-EP BEP 701 Dual Operation VSS and Emergency Parallel Switch

Features: *Remote emergency parallel function: The 701-MDVS and 720-MDVS can be operated through a momentary button on the dash which will parallel the batteries for a preset time of 10 minutes. Once this 10 minutes has passed, if the voltage is up high enough for the voltage sensitive switch to operate, it will stay engaged. If not, it will disengage.

*Engine run sensing: VSR will engage when the voltage on either start or house battery reaches 13.7 volts. If the combined battery voltage drops below 13.0 volts and the engine is not running, after 5 seconds the contacts will open and stay open until the start or house battery voltage exceeds 13.7 volts. If the combined battery voltage drops below 12.2 volts and the engine is running, after 5 minutes the contacts will open and stay open until the start or house battery voltage exceeds 13.7 volts. If voltage drops below 13 volts and stays above 12.2 volts on either start or house battery while engine is running, the VSR will stay engaged. (12V example)

*Manual over-ride option. *Dual battery sensing. *The advantages of using a high current VSR is that it will cover your dual battery charging requirements and emergency parallel operation in one unit.

Dimensions: 68 L x 68 W x 101 H mm (2.7 x 2.7 x 4”)

Part Numbers : 701-MDVS - 12V Switch 701-MDVS - 24V Switch 110 Electrical - Digital Voltage Sensing Relay (DVSR)

BEP DVSR 140 Amp - 12/24 Volt

The DVSR (Digital Voltage Sensing Relay) allows charging of two independent battery banks from a single charging source. When the voltage on the start battery rises to a charged level, the DVSR engages allowing the 2nd battery to charge. When charging stops and voltage falls, the DVSR will disengage, isolating the two batteries from each other. Dual sensing functionality enables the sensing of two battery banks, allowing two way charging.

Advantages of fitting a VSR over conventional charge (diode isolators).

* Easy 3 wire connection at the battery. No need to bypass existing alternator wiring. * VSRs have no volt drop. Conventional diode isolators incur a minimum of 0.6 volt drop. * Compact size - No large heat sink * Cost effective solution

Dimensions: 69L x 69W x 50H mm

Part Number : 710-140A BEP Key Switch Control for MD Motorised Switches

For the remote operation of the 701-MD and 720-MDO motorised battery switch range. It can be mounted stand-alone or as a component of the Contour Connect range.

Dimensions: 68 x 68mm (2.7 x 2.7”)

Works with 12v or 24v installations of BEP Marine motorised switches.

Part Number : 80-724-0006-00

BEP Remote Emergency Parallel Switch for MD Motorised Switches

For the remote operation of 701-MDVS, 80-701-0018-00, 720-MDVS/MDVSO, and 720-MDO-EP motorised battery switches.

This momentary switch is used to activate the built-in 10 minute emergency parallel function of the BEP Marine battery switches, and can be placed within easy reach of the operator. The remote switch also features an LED, which shows the battery switch status.

Dimensions: 68 x 68mm (2.7 x 2.7”)

Works with 12v or 24v installations of BEP Marine motorised switches.

Part Number : 80-724-0007-00

111 Electrical - DC Circuit Breaker Panels - No Meters

BEP 4 Way Circuit Breaker Panel 900

12 Volt DC

1 x 5 Amp Circuit Breaker 2 x 10 Amp Circuit Breakers 1 x 15 Amp Circuit Breaker

* Marine Grade powder coated aluminium * Airpax circuit breaker * Stylish Contour Design facia * Green LED backlit labels * Red LED indicates systems on * Panels meet ABYC standards * Includes label sheet

Part Numbers : 900 BEP 8 Way Circuit Breaker Panel 901

12 Volt DC

2 x 5 Amp Circuit Breakers 2 x 10 Amp Circuit Breakers 3 x 15 Amp Circuit Breakers 1 x 20 Amp Circuit Breaker

* Marine Grade powder coated aluminium * Airpax circuit breaker * Stylish Contour Design facia * Green LED backlit labels * Red LED indicates systems on * Panels meet ABYC standards

Dimensions (mm): 200 x 127 x 65 for the 901V (Vertical)

Dimensions (mm):115 x 239 x 65 for the 901H (Horizontal)

Part Numbers : 901H (Horizontal) or 901V (Vertical) BEP 12 Way Circuit Breaker Panel 902

12 Volt DC

3 x 5 Amp Circuit Breakers 4 x 10 Amp Circuit Breakers 4 x 15 Amp Circuit Breakers 1 x 25 Amp Circuit Breaker

* Marine Grade powder coated aluminium * Airpax circuit breaker * Stylish Contour Design facia * Green LED backlit labels * Red LED indicates systems on * Panels meet ABYC standards

Dimensions (mm): 185 x 127 x 65 for the 902NMV (Vertical)

Dimensions (mm): 115 x 351 x 65 for the 902NMH (Horizontal)

Part Numbers : 902NMH (Horizontal) or 902NMV (Vertical) 112 Electrical - DC Circuit Breaker Panels - No Meters

BEP 16 Way Circuit Breaker Panel 904

12 Volt DC

4 x 5 Amp Circuit Breakers * Marine Grade powder coated aluminium 5 x 10 Amp Circuit Breakers * Airpax circuit breaker 5 x 15 Amp Circuit Breakers * Stylish Contour Design facia 1 x 20 Amp Circuit Breaker * Green LED backlit labels 1 x 25 Amp Circuit Breaker * Red LED indicates systems on * Panels meet ABYC standards

Dimensions (mm): 370 x 127 x 65 for the 904NMV (Vertical)

Dimensions (mm): 115 x 463 x 65 for the 904NMH (Horizontal)

Part Numbers : 904NMH (Horizontal) or 904NMV (Vertical)

BEP 24 Way Circuit Breaker Panel 905

12 Volt DC

5 x 5 Amp Circuit Breakers * Marine Grade powder coated aluminium 8 x 10 Amp Circuit Breakers * Airpax circuit breaker 8 x 15 Amp Circuit Breakers * Stylish Contour Design facia 1 x 20 Amp Circuit Breaker * Green LED backlit labels 1 x 25 Amp Circuit Breaker * Red LED indicates systems on 1 x 30 Amp Circuit Breaker * Panels meet ABYC standards

Dimensions (mm): 285 x 239 x 65 for the 905NMV (Vertical)

Dimensions (mm): 200 x 351 x 65 for the 905NM (Horizontal)

Part Numbers : 905NM (Horizontal) or 905NMV (Vertical)

BEP 32 Way Circuit Breaker Panel 906

12 Volt DC

7 x 5 Amp Circuit Breakers * Marine Grade powder coated aluminium 11 x 10 Amp Circuit Breakers * Airpax circuit breaker 11 x 15 Amp Circuit Breakers * Stylish Contour Design facia 1 x 20 Amp Circuit Breaker * Green LED backlit labels 1 x 25 Amp Circuit Breaker * Red LED indicates systems on 1 x 30 Amp Circuit Breaker * Panels meet ABYC standards

Dimensions (mm): 370 x 239 x 65 for the 906NMV (Vertical)

Dimensions (mm): 200 x 463 x 65 for the 906NMH (Horizontal)

Part Numbers : 906NMH (Horizontal) or 906NMV (Vertical)

113 Electrical - DC Circuit Breaker Panels - Analogue Meters

BEP 12 Way Circuit Breaker Panel - with Analogue Meter

12 Volt DC

3 x 5 Amp Circuit Breakers * Marine Grade powder coated aluminium 4 x 10 Amp Circuit Breakers * Airpax circuit breaker 4 x 15 Amp Circuit Breakers * Stylish Contour Design facia 1 x 25 Amp Circuit Breaker * Green LED backlit labels * Red LED indicates systems on Dimensions (mm): 200 x 239 x 65 * Panels meet ABYC standards

All analogue panels supplied with one shunt, extra shunts ordered separately. All panels available in 12 or 24V configuration. Part number shown is for 12V backlighting. If 24V is required, please specify when ordering.

Part Number : 902A

BEP 16 Way Circuit Breaker Panel - with Analogue Meter

12 Volt DC

4 x 5 Amp Circuit Breakers * Marine Grade powder coated aluminium 5 x 10 Amp Circuit Breakers * Airpax circuit breaker 5 x 15 Amp Circuit Breakers * Stylish Contour Design facia 1 x 20 Amp Circuit Breaker * Green LED backlit labels 1 x 25 Amp Circuit Breaker * Red LED indicates systems on * Panels meet ABYC standards Dimensions (mm): 295 x 239 x 65

All analogue panels supplied with one shunt, extra shunts ordered separately. All panels available in 12 or 24V configuration. Part number shown is for 12V backlighting. If 24V is required, please specify when ordering.

Part Number : 904A

BEP 24 Way Circuit Breaker Panel - with Analogue Meter

12 Volt DC

5 x 5 Amp Circuit Breakers * Marine Grade powder coated aluminium 8 x 10 Amp Circuit Breakers * Airpax circuit breaker 8 x 15 Amp Circuit Breakers * Stylish Contour Design facia 1 x 20 Amp Circuit Breaker * Green LED backlit labels 1 x 25 Amp Circuit Breaker * Red LED indicates systems on 1 x 30 Amp Circuit Breaker * Panels meet ABYC standards

Dimensions (mm): 295 x 351 x 65

All analogue panels supplied with one shunt, extra shunts ordered separately. All panels available in 12 or 24V configuration. Part number shown is for 12V backlighting. If 24V is required, please specify when ordering.

Part Number : 905A

114 Electrical - DC Circuit Breaker Panels - Analogue Meters

BEP 32 Way Circuit Breaker Panel - with Analogue Meter

12 Volt DC

7 x 5 Amp Circuit Breakers * Marine Grade powder coated aluminium 11 x 10 Amp Circuit Breakers * Airpax circuit breaker 11 x 15 Amp Circuit Breakers * Stylish Contour Design facia 1 x 20 Amp Circuit Breaker * Green LED backlit labels 1 x 25 Amp Circuit Breaker * Red LED indicates systems on 1 x 30 Amp Circuit Breaker * Panels meet ABYC standards

Dimensions (mm): 295 x 463 x 65

All analogue panels supplied with one shunt, extra shunts ordered separately. All panels available in 12 or 24V configuration. Part number shown is for 12V backlighting. If 24V is required, please specify when ordering.

Part Number : 906A BEP 32 Way Circuit Breaker Vertical Panel - with Analogue Meter

12 Volt DC

7 x 5 Amp Circuit Breakers * Marine Grade powder coated aluminium 11 x 10 Amp Circuit Breakers * Airpax circuit breaker 11 x 15 Amp Circuit Breakers * Stylish Contour Design facia 1 x 20 Amp Circuit Breaker * Green LED backlit labels 1 x 25 Amp Circuit Breaker * Red LED indicates systems on 1 x 30 Amp Circuit Breaker * Panels meet ABYC standards

Dimensions (mm): 455 x 239 x 65

All analogue panels supplied with one shunt, extra shunts ordered separately. All panels available in 12 or 24V configuration. Part number shown is for 12V backlighting. If 24V is required, please specify when ordering.

Part Number : 906AV BEP 48 Way Circuit Breaker Panel - with Analogue Meter

12 Volt DC

12 x 5 Amp Circuit Breakers * Marine Grade powder coated aluminium 15 x 10 Amp Circuit Breakers * Airpax circuit breaker 15 x 15 Amp Circuit Breakers * Stylish Contour Design facia 3 x 20 Amp Circuit Breakers * Green LED backlit labels 1 x 25 Amp Circuit Breaker * Red LED indicates systems on 2 x 30 Amp Circuit Breakers * Panels meet ABYC standards

Dimensions (mm): 380 x 463 x 65

All analogue panels supplied with one shunt, extra shunts ordered separately. All panels available in 12 or 24V configuration. Part number shown is for 12V backlighting. If 24V is required, please specify when ordering.

Part Number : 907A 115 Electrical - DC Circuit Breaker Panels - Digital Meters

BEP 12 Way Circuit Breaker Panel - with Digital Meter

12 or 24 Volt DC

3 x 5 Amp Circuit Breakers * Marine Grade powder coated aluminium 4 x 10 Amp Circuit Breakers * Airpax circuit breaker 4 x 15 Amp Circuit Breakers * Stylish Contour Design facia 1 x 25 Amp Circuit Breaker * Green LED backlit labels * Red LED indicates systems on * Panels meet ABYC standards

Dimensions (mm): 380 x 127 x 65

Battery monitoring using BEP multifunction meter (voltage on 3 battery banks, charge, discharge amsp and amp-hours remaining on main battery bank. All Digital panels are supplied with 450A - 50mV shunt.

Part Number : 902D

BEP 20 Way Circuit Breaker Panel - with Digital Meter

12 or 24 Volt DC * Marine Grade powder coated 5 x 5 Amp Circuit Breakers aluminium 6 x 10 Amp Circuit Breakers * Airpax circuit breaker 7 x 15 Amp Circuit Breakers * Stylish Contour Design facia 1 x 20 Amp Circuit Breaker * Green LED backlit labels 1 x 30 Amp Circuit Breaker * Red LED indicates systems on * Panels meet ABYC standards Dimensions (mm): 200 x 351 x 65

Battery monitoring using BEP multifunction meter (voltage on 3 battery banks, charge, discharge amsp and amp-hours remaining on main battery bank. All Digital panels are supplied with 450A - 50mV shunt.

Part Number : 903D BEP 24 Way Circuit Breaker Panel - with Digital Meter

12 or 24 Volt DC

5 x 5 Amp Circuit Breakers * Marine Grade powder coated aluminium 8 x 10 Amp Circuit Breakers * Airpax circuit breaker 8 x 15 Amp Circuit Breakers * Stylish Contour Design facia 1 x 20 Amp Circuit Breaker * Green LED backlit labels 1 x 25 Amp Circuit Breaker * Red LED indicates systems on 1 x 30 Amp Circuit Breaker * Panels meet ABYC standards

Dimensions (mm): 380 x 239 x 65

Battery monitoring using BEP multifunction meter (voltage on 3 battery banks, charge, discharge amsp and amp-hours remaining on main battery bank. All Digital panels are supplied with 450A - 50mV shunt.

Part Number : 905DV 116 Electrical - DC Circuit Breaker Panels - Cruiser Series

BEP 32 Way “Cruiser Series” Yacht Circuit Breaker Panel - with Digital Meter

12 or 24 Volt DC

7 x 5 Amp Circuit Breakers * Marine Grade powder coated aluminium 11 x 10 Amp Circuit Breakers * Airpax circuit breaker 11 x 15 Amp Circuit Breakers * Stylish Contour Design facia 1 x 20 Amp Circuit Breaker * Green LED backlit labels 1 x 25 Amp Circuit Breaker * Red LED indicates systems on 1 x 30 Amp Circuit Breaker * Panels meet ABYC standards

Yacht - Standard dipiction; steaming light, deck light, port and starboard navigation lights, stern light, masthead light, tri-colour and two bilge pumps.

Dimensions (mm): 380 x 351 x 65

Battery monitoring using BEP multifunction meter (voltage on 3 battery banks, charge, discharge amsp and amp-hours remaining on main battery bank. All Digital panels are supplied with 450A - 50mV shunt.

Part Number : NC32YD

BEP 36 Way “Cruiser Series” Launch Circuit Breaker Panel - with Digital Meter

12 or 24 Volt DC

8 x 5 Amp Circuit Breakers * Marine Grade powder coated aluminium 12 x 10 Amp Circuit Breakers * Airpax circuit breaker 12 x 15 Amp Circuit Breakers * Stylish Contour Design facia 2 x 20 Amp Circuit Breakers * Green LED backlit labels 1 x 25 Amp Circuit Breaker * Red LED indicates systems on 1 x 30 Amp Circuit Breaker * Panels meet ABYC standards

Launch - Standard dipiction; steaming light, port and starboard navigation lights, stern light and three bilge pumps.

Dimensions (mm): 380 x 351 x 65

Battery monitoring using BEP multifunction meter (voltage on 3 battery banks, charge, discharge amsp and amp-hours remaining on main battery bank. All Digital panels are supplied with 450A - 50mV shunt.

Part Number : NC36LD

117 Electrical - DC Circuit Breaker Panels - Millennium Series

BEP 28 Way Millennium Circuit Breaker Panel - with Digital Meter

12 Volt DC

8 x 5 Amp Circuit Breakers * Marine Grade powder coated aluminium 8 x 10 Amp Circuit Breakers * Airpax circuit breaker 8 x 15 Amp Circuit Breakers * Stylish Contour Design facia 2 x 20 Amp Circuit Breakers * Green LED backlit labels 2 x 30 Amp Circuit Breakers * Red LED indicates systems on * Panels meet ABYC standards

Dimensions (mm): 370 x 239 x 65

Compact sizing.

Battery monitoring using BEP multifunction meter (voltage on 3 battery banks, charge, discharge amsp and amp-hours remaining on main battery bank. All Digital panels are supplied with 450A - 50mV shunt.

All panels available in 12 or 24V configuration. Part number shown is for 12V backlighting. If 24V is required, please specify when ordering.

Part Number : M28D

BEP 32 Way Millennium Circuit Breaker Panel - with Digital Meter

12 Volt DC

7 x 5 Amp Circuit Breakers * Marine Grade powder coated aluminium 11 x 10 Amp Circuit Breakers * Airpax circuit breaker 11 x 15 Amp Circuit Breakers * Stylish Contour Design facia 1 x 20 Amp Circuit Breaker * Green LED backlit labels 1 x 25 Amp Circuit Breaker * Red LED indicates systems on 1 x 30 Amp Circuit Breaker * Panels meet ABYC standards

Dimensions (mm): 285 x 351 x 65

Compact sizing.

Battery monitoring using BEP multifunction meter (voltage on 3 battery banks, charge, discharge amsp and amp-hours remaining on main battery bank. All Digital panels are supplied with 450A - 50mV shunt.

All panels available in 12 or 24V configuration. Part number shown is for 12V backlighting. If 24V is required, please specify when ordering.

Part Number : M32D

118 Electrical - DC Circuit Breaker Panels - Millennium Series

BEP 44 Way Millennium Circuit Breaker Panel - with Digital Meter

12 Volt DC

10 x 5 Amp Circuit Breakers * Marine Grade powder coated 14 x 10 Amp Circuit Breakers aluminium 14 x 15 Amp Circuit Breakers * Airpax circuit breaker 3 x 20 Amp Circuit Breakers * Stylish Contour Design facia 1 x 25 Amp Circuit Breaker * Green LED backlit labels 2 x 30 Amp Circuit Breakers * Red LED indicates systems on * Panels meet ABYC standards

Dimensions (mm): 370 x 351 x 65 for M44D (Vertical)

Dimensions (mm): 285 x 463 x 65 for M44DH (Horizontal)

Compact sizing.

Battery monitoring using BEP multifunction meter (voltage on 3 battery banks, charge, discharge amsp and amp-hours remaining on main battery bank. All Digital panels are supplied with 450A - 50mV shunt.

All panels available in 12 or 24V configuration. Part number shown is for 12V backlighting. If 24V is required, please specify when ordering.

Part Numbers : M44DH (Horizontal) or M44D (Vertical)

BEP 56 Way Millennium Circuit Breaker Panel - with Digital Meter

12 Volt DC

12 x 5 Amp Circuit Breakers * Marine Grade powder coated aluminium 18 x 10 Amp Circuit Breakers * Airpax circuit breaker 18 x 15 Amp Circuit Breakers * Stylish Contour Design facia 4 x 20 Amp Circuit Breakers * Green LED backlit labels 2 x 25 Amp Circuit Breakers * Red LED indicates systems on 2 x 30 Amp Circuit Breakers * Panels meet ABYC standards

Dimensions (mm): 455 x 351 x 65

Compact sizing.

Battery monitoring using BEP multifunction meter (voltage on 3 battery banks, charge, discharge amsp and amp-hours remaining on main battery bank. All Digital panels are supplied with 450A - 50mV shunt.

All panels available in 12 or 24V configuration. Part number shown is for 12V backlighting. If 24V is required, please specify when ordering.

Part Number : M56D 119 Electrical - DC Circuit Breaker Panels

BEP Contour Connect Circuit Protection Module

The CC–804 is equipped to cover essential circuits requirements (bilge, pumps etc) and is fitted with one 50amp CB for DC mains or treatment systems. It is also fitted with a 135amp 185 Series CB for anchor windlass. The CC–804 compliments the other modules for either single or dual engine installations.

Module dimension: 166mm(6.5”) L x 106mm (4.2”) W x 55mm (2.2”) D

Cutout dimension: 146mm(5.75”) L x 86mm(3.4”) W

Part Number : CC-804

BEP Contour Connect Circuit Breaker Module

The CC-807T is supplied pre-wired and fitted with 2 x 5amp, 2 x 10amp, 3 x 15amp and 1 x 20amp toggle circuit breakers. Supplied with SET-CC-1 label sheet and back cover to enclose exposed terminals. An economical 8 way circuit breaker panel option. Stackable for vertical or horizontal mounting.

Dimensions: 166mm (6.5”) L x 106mm (4.2”) x W 55mm (2.2”) D

Cutout dimension: 146mm (5.75”) L x 86mm (3.4”) W

Part Number : CC-807T

BEP Contour Connect Push to Reset and Toggle Circuit Breaker Module

The CC-807T-PR is supplied pre-wired and fitted with 2 x 10amp, and 2 x 15amp toggle circuit breakers and 2x 10amp and 2 x15amp push reset circuit breakers. Supplied with SET-CC-1 label sheet and back cover to enclose exposed terminals.

Dimensions: 166mm (6.5”) L x 106mm (4.2”) x W 55mm (2.2”) D

Cutout dimension: 146mm (5.75”) L x 86mm (3.4”) W

Part Number : CC-807T-PR

120 Electrical - Spray Proof Marine Switch Panels

BEP 3 Way Spray Proof Switch Panel

3 Way spray proof switch panel with 16Amp power socket.

*Compact Panel size. *Sprayproof in-line fuse holders with fuses are included with all compact models. *Waterproof power sockets three way & five way only. *Power socket rated at 16A. *Waterproof to IP56. *Available in two colours: black or white.

Panel dimension: 95mm(3.7”) L x 107mm (4.25”) W x 75mm (2.9”) H

Part Numbers : 900-3WPS (Black) or 900-3WPSW (White) BEP 4 Way Spray Proof Switch Panel

4 Way spray proof switch panel.

*Compact Panel size. *Sprayproof in-line fuse holders with fuses are included with all compact models. *Waterproof to IP56. *Available in two colours: black or white.

Panel dimension: 95mm(3.7”) L x 107mm (4.25”) W x 75mm (2.9”) H

Part Numbers : 900-4WP (Black) or 900-4WPW (White) BEP 5 Way Spray Proof Switch Panel

5 Way spray proof switch panel with 16Amp power socket.

*Compact Panel size. *Sprayproof in-line fuse holders with fuses are included with all compact models. *Waterproof power sockets three way & five way only. *Power socket rated at 16A. *Waterproof to IP56. *Available in two colours: black or white.

Panel dimension: 95mm(3.7”) L x 107mm (4.25”) W x 75mm (2.9”) H

Part Numbers : 900-5WPS (Black) or 900-5WPSW (White) BEP 6 Way Spray Proof Switch Panel

6 Way spray proof switch panel.

*Compact Panel size. *Sprayproof in-line fuse holders with fuses are included with all compact models. *Waterproof to IP56. *Available in two colours: black or white.

Panel dimension: 95mm(3.7”) L x 107mm (4.25”) W x 75mm (2.9”) H

Part Numbers : 900-6WP (Black) or 900-6WPW (White)

121 Electrical - Marine Switch Panels

BEP 6 Way Contour Spray Proof Switch Panel

The CSP6 panel range comes in 3 models. All models are backlit and are spray proof.

Three models are available for different installation applications

*Switches protected by high quality neoprene rubber boots *Green LED Back-lit labels *Red LED’s for systems on *Waterproof to IP56 rating *Removable cover plate over switches conceals screws and water drain *Switch current rating 20Amps DC * Panels are supplied standard with label set

Panel dimension: 158mm(6.25”) L x 112mm (4.4”) W x 75mm (2.5”) H

Part Numbers : CSP6 (Includes 6 switches unfused for installation where separate fused supply is available). CPS6-F (Includes 6 switches and 3 inline fuse holders with fuses behind panel). CPS6-PTC (Fuses are soild state resettable fuses which change to a high resistance device on over-current. The panel is supplied with 6 x 9A PTC fuses mounted internally). BEP Micro Series 900-2WP

*Labels backlit with green LED changing to red when switch is on. *Full range of text or graphical labels available. *Mix’n’match LED’s and switches to suit your requirements.

The MICRO range offers the unique ability to select the size & orientation of switch panels by adding the compact modules together horizontally or vertically.

Dimensions: 86mm(3.4”) L x 58mm (2.3”) W x 28mm (1.2”) H 2 x 2 way switches. Part number : 900-2WP

900-2WPMOM 900-SOP 900-BA 900-2WPOFO

1 x 2 way switch, 1 x 3 way double pole switch. Part number : 900-2WPOFO

1 x 2 way switch, 2 x 10mm LEDs showing Bilge alarm and pump control panel includes: 1 on/off/on switch for 1 x 3 momentary switch. systems in operation. auto manual control; 1 warning light and alarm for high water level. Part number : Part number : 900-SOP (Float switch sold separately). 900-2WPMOM Part number : 900-BA 122 Electrical - Marine Switch Panels

BEP Contour Interior Switch - Single

The Contour Interior switch can be either surface or recess mounted. The interior switch is supplied with a three terminal on/on switch which can be used for on/off circuits or two way light installations. For applications such as shower drain pumps or electric toilets. Rated at 10A DC. Backlit label with label with systems on indicator. All switches include a label sheet.

Dimensions: 60mm(2.4”) L x 30mm (1.2”) W x 18mm (0.75”) H Part number : 1100-BK

BEP Contour Interior Switch - Double

The Contour Interior switch can be either surface or recess mounted. The interior switch is supplied with a three terminal on/on switch which can be used for on/off circuits or two way light installations. For applications such as shower drain pumps or electric toilets. Rated at 10A DC. Backlit label with label with systems on indicator. All switches include a label sheet.

Dimensions: 91mm(3.6”) L x 30mm (1.2”) W x 18mm (0.75”) H Part number : 1101-BK

BEP Contour Exterior Switch - Single

The Contour Interior switch can be either surface or recess mounted. The interior switch is supplied with a three terminal on/on switch which can be used for on/off circuits or two way light installations. For applications such as shower drain pumps or electric toilets. Rated at 20A DC. Backlit label with label with systems on indicator. All switches include a label sheet.

Dimensions: 60mm(2.4”) L x 30mm (1.2”) W x 18mm (0.75”) H Part number : 1100-BK-TS

BEP Contour Exterior Switch - Double

The Contour Interior switch can be either surface or recess mounted. The interior switch is supplied with a three terminal on/on switch which can be used for on/off circuits or two way light installations. For applications such as shower drain pumps or electric toilets. Rated at 20A DC. Backlit label with label with systems on indicator. All switches include a label sheet.

Dimensions: 91mm(3.6”) L x 30mm (1.2”) W x 18mm (0.75”) H Part number : 1101-BK-TS

123 Electrical - Battery Distribution Accessories

BEP 32111 - Toggle BEP Splash Proof Switch Boot

Current Rating: For metal BEP toggle switches. 20 Amps @ 12 or 24 Volt DC NOTE: BEP switches only! Part Numbers : 32111 On/Off Part Number : M331 32113 On/On 32114 On/Off/On 32115 On/Off/(On) 32120 (On)/Off/(On) 32123 (On)/Off/(On) Double Pole BEP Insulated Stud (single) - 6mm BEP Insulated Stud (single) - 8mm

6mm tinned copper stud with high temperature plastic base 8mm tinned copper stud with high temperature plastic base

Available for Positive or Negative. Available for Positive or Negative.

Dimensions: 44mm (L) x 18mm (W) x 35.8mm (H) Dimensions: 44mm (L) x 18mm (W) x 35.8mm (H) 32mm fixing hole centres. 32mm fixing hole centres.

Part Numbers : Part Numbers : IS-6MM-1R - Positive - Red IS-8MM-1R - Positive - Red IS-6MM-1 - Negative - Black IS-8MM-1 - Negative - Black

BEP Insulated Stud (single) - 10mm BEP Insulated Stud Covers (10mm)

10mm tinned copper stud with high temperature plastic base BEP Insulated stud cover. Stud covers push securely over the threaded stud covering to Available for Positive or Negative. ABYC standards. To suit 10mm studs. Dimensions: 44mm (L) x 18mm (W) x 35.8mm (H) Red or Black colour option. 32mm fixing hole centres. Part Numbers : Part Numbers : Black - ISC-10/BK IS-10MM-1R - Positive - Red Red - ISC-10/R IS-10MM-1 - Negative - Black

124 Electrical - Battery Distribution Accessories

BEP Insulated Dual Studs - 6mm BEP Insulated Dual Stud linked -10mm

BEP Insulated dual stud 6mm, Black BEP Insulated dual stud linked, 10mm Black

6mm tinned copper stud with 10mm tinned copper stud with high temperature plastic base high temperature plastic base

Dimensions: 42.25mm (L) x 36mm Dimensions: 42.25mm (L) x 36mm (W) x 31mm (H) (W) x 31mm (H) 25.5mm stud centres. 25.5mm stud centres. 36mm fixing hole centres. 36mm fixing hole centres.

Part Number : IS-6MM-2L Part Number : IS-10MM-2L

BEP Insulated Dual Studs -10mm & BEP Insulated Dual Stud Cover (6mm)

8mm BEP Insulated dual stud cover. Stud covers push securely over the threaded stud covering to BEP Insulated dual stud, 10mm ABYC standards. and 8mm, Black To suit 6mm studs. Red or Black colour option. 10mm and 8mm tinned copper stud with high temperature Part Numbers : plastic base. Designed for Black - ISC-6-2 Yamaha engine installations Red - ISC-6-2R

Dimensions: 42.25mm (L) x 36mm (W) x 31mm (H) 25.5mm stud centres. 36mm fixing hole centres.

Part Number : IS-10MM-8MM

BEP 702 Distribution Studs BEP 702 Dual Distribution Stud

The Contour Distribution Stud allows terminating of heavy duty The Contour Distribution Stud allows terminating of heavy duty cables for one or more connections. cables for one or more connections. Contour lock mouldings with removable side plates allow for Contour lock mouldings with removable side plates allow for connections from all sides. connections from all sides.

Two sizes available:8mm or 10 mm 702-2S was designed specifically for transom areas for connecting battery cables from outboards. It also has many other Dimensions: 69mm (L) x 69mm (W) x 50mm (H) applications where heavy duty positive and negative connections need to be terminated. Part Numbers : 702 (10mm Stud) Stud size: 10 mm (3/8 in) 702-8 (8mm Stud) Dimensions: 69mm (L) x 69mm (W) x 50mm (H)

Part Number : 702-2S

125 Electrical - Battery Distribution Accessories

BEP 704 Distribution Stud BEP Heavy Duty Distribution Bus

The 704-4S was designed for multiple heavy duty connections - 300A which need to be isolated from each other. This model completes the range of heavy duty connectors and meets ABYC standards BEP 703-300A Distribution Bus is designed to take loads from for exposed terminals. Heavy Duty Starter Circuits. Taller cover allows for more bulky cables and lugs. Dimensions: 138mm (L) x 69mm (W) x 50mm (H) Dimensions: 138mm (L) x 69mm (W) x 50mm (H) Stud size: 10mm (3/8 in) x 4 Stud Size: 4 x 10mm Stud size: 10 mm (3/8 in) Current Rating: 300A Part Number : 704-4S Part Number : 703-300A

BEP Heavy Duty Distribution Bus - 500A

BEP 703-500A Distribution Bus is designed to take loads from Heavy Duty Starter Circuits. Taller cover allows for more bulky cables and lugs.

Dimensions: 138mm (L) x 69mm (W) x 75mm (H)

Stud Size: 3 x 10mm

Current Rating: 500A

Part Number : 703-500A

BEP Terminal Blocks

The 708 links are designed for space saving interconnections of terminals Diagram depicts typical Master Switch when battery distribution modules are linked together. Four standard solid links setup using 708 Terminal Links. are available for interconnection of the 701 battery switch with other Battery Distribution products and two larger links which are intended for the heavy duty battery switch. See illustration for link applications

Part numbers : 708-42.5 (Distance between centres: 43mm, Hole diameter: 10mm, 275A) 708-54.5 (Distance between centres: 55mm, Hole diameter: 10mm, 275A) 708-64.5 (Distance between centres: 65mm, Hole diameter: 10mm, 275A) 708-68.5 (Distance between centres: 69mm, Hole diameter: 10mm, 275A) 708-62-12MM (Distance between centres: 62mm, Hole diameter: 12mm, 550A) 708-102-12MM (Distance between centres: 102mm, Hole diameter: 12mm, 550A)

126 Electrical - Battery Distribution Accessories

BEP Bus Bars BEP Dual Bus Bars

Features: Features: * 4mm (5/32”) stainless steel screws with shake proof washers. * Twin bus bar rows * 6mm (1/4”) input studs * 4mm (5/32”) stainless steel screws with shake proof washers. * 100A current rated * 6mm (1/4”) input studs * Tin plated Brass * 100A current rated * Insulated mounting base with recessed mounting holes avoids * Tin plated Brass accidential shorting on aluminium backing plates. * Insulated mounting base with recessed mounting holes avoids accidential shorting on aluminium backing plates. Specifications: * Voltage Rating: 300 Volts AC Max & 48 Volts DC Max Specifications: * Bus material: Tin plated brass * Voltage Rating: 300 Volts AC Max & 48 Volts DC Max * Stud material: Tin plated brass * Bus material: Tin plated brass * Screw Material: Stainless Steel * Stud material: Tin plated brass * Base material: Flame retardant plastic * Screw Material: Stainless Steel * Base material: Flame retardant plastic Dimensions: 117 (L) x 15 (W) x 29 (H) mm (6 Way Bus Bar) Dimensions: 177 (L) x 15 (W) x 29 (H) mm (12 Way Bus Bar) Dimensions: 100 (L) x 42 (W) x 32 (H) mm (Twin 6 Way Bus Bar) Dimensions: 204 (L) x 24 (W) x 29 (H) mm (24 Way Bus Bar) Dimensions: 160 (L) x 42 (W) x 32 (H) mm (Twin 12 Way Bus Bar)

Part Numbers : Part Numbers : BB-6W (6 Way Bus Bar) BB-6W-2NC (Twin 6 Way Bus Bar) BB-12W (12 Way Bus Bar) BB-12W-2NC (Twin 12 Way Bus Bar) BB-24W-2S (24 Way Bus Bar)

BEP Bus Bar - 150Amps

The multi bus bars enables either positive and negative (DC) buses on one block or earth and neutral (AC) buses on one block.

Features Specifications: *4mm (5/32”) stainless steel screws with shake proof washers. *Bus material: Tin plated brass *4 x 6mm (1/4”) input studs *Stud material: Tin plated brass *Tin plated Brass *Voltage Rating: 300 Volts AC *Screw Material: Stainless Steel Max & 48 Volts DC Max *Base material: Flame retardant plastic *Insulated mounting base with recessed mounting holes avoids accidential shorting on aluminium backing plates. Part Number : BB-4S-150A BEP Bus Bar Covers

The Insulated Bus Bar Covers are designed to be a push fit, and to securely cover exposed studs and terminal lugs. Conforming to ABYC standards. They come in 3 different sizes to cover the range and in 2 colours, red for positive and black for negative to distinguish the Bus Bars.

Features: •Flame resistant flexible plastic. •Colour coded for polarity. •Unique push on fit.

Part Numbers : BBC-1 (BEP Bus Bar cover 6 way – Black) BBC-1R (BEP Bus Bar cover 6 way – Red) BBC-2 (BEP Bus Bar cover 12 way – Black) BBC-2R (BEP Bus Bar cover 12 way –Red) BBC-3 (BEP Bus Bar cover 24 way – Black) BBC-3R (BEP Bus Bar cover 24 way – Red) 127 Electrical - Battery Distribution Accessories

BEP Contour Heavy Duty Circuit BEP 24 hour Essential Circuit Breakers Breaker Module (4W)

705 Contour Circuit Breaker The 706-4W 24hr service HD allows switchable module consists of 1 x protection for heavy duty 5amp and 3 x 15amp push circuits like Windlasses to reset Carling CLB Series or Davit winches utilising thermal circuit breakers. Bussmann Heavy Duty Suitable for essential thermal circuit breakers. Modular sizing with contour lock circuits such as bilge pump moulding allows easy grouping. LED to indicate circuit is on. auto float switch supplies and stereo memory circuits. The push to reset function ensures Five standard ratings available. 50Amps - 150Amps essential 24hr circuits cannot be switched off inadvertently. This is contained in the contour lock double module. Stud Size: 6mm Dimensions: 180mm (L) x 69mm (W) x 70mm (H) Dimensions: 138mm (L) x 69mm (W) x 75mm (H) Part Number : 706-4W Part Numbers : Rating: 705-50A 50 Amp BEP 24 hour Essential Circuit 705-80A 80 Amp 705-100A 110 Amp Breaker Module (2W) 705-135A 135 Amp 705-150A 150 Amp 706-2W 24 hour essential circuit module. Designed for smaller systems where only 2 circuit breakers are required. BEP 707 Circuit Breaker Module Supplied with 2 x 10 amp Carling CLB Series circuit Offers provision for three breakers. circuit breakers ideal for Suitable for essential circuits medium duty loads, like such as bilge pump auto float waste treatment systems switch supplies and stereo and electric toilets. memory circuits. The push to reset function ensures essential 24hr circuits cannot be switched off inadvertently. This is Supplied with 1 x 50A and 2 contained in the contour lock single module x 25A Circuit Breakers. Dimensions: 138 (W) x 69 (D) x 75mm (H) Dimensions: 69mm (L) x 69mm (W) x 70mm (H)

Part Number : 707 Part Number : 706-2W

BEP Fuse holder Heavy Duty Airpax Single Pole Circuit Breakers

Allows fusing of heavy duty accessories (80-500 Amp) IEG magnetic circuit breakers provide reliable circuit protection Mounted in Contour lock mouldings with removable sides. and accurate circuit control. Meets ABYC Standards for exposed terminals. * Unaffected by Temperature * ‘trip free’ action - means the Dimensions: circuit will trip if overloaded even 138 x 69 x 50 mm if the handle is held in the ON Stud size 10 mm position.

* Fuse not included. Sold Part Number: Rating: Separately. (See page 109 CBS-10A-SP 10 Amp for sizes) CBS-15A-SP 15 Amp CBS-20A-SP 20 Amp Part Number : 704-ANL CBS-30A-SP 30 Amp CBS-50A-SP 50 Amp

128 Electrical - Battery Distribution Accessories

BEP Surge Protection Module

Surge Protection Module. Protect your electronics from becoming damaged by harmful high voltage spikes. When fitted to the battery supply these modules look for sudden increases in voltage then switch into protection mode to absorb and suppress the high energy spike. Available in two modules - 12V or 24V DC

Dimensions: 69mm (L) x 69mm (W) x 50mm (H)

Part Numbers : 80-707-00004-00 - (Surge Protection Module 12v DC) 80-707-00005-00 - (Surge Protection Module 24v DC) BEP Terminal Blocks

Ideal for isolated connections up to 30A. Suitable for connecting tails from AC and DC panels. Base material: Phenolic Current rating: 30A Max. voltage rating: 300V AC/DC Screw size: 0.25” (6.3 mm)

Dimensions: 111mm (L) x 32mm (W) x 16mm (H) (6 Connections) Dimensions: 169mm (L) x 32mm (W) x 16mm (H) (10 Connections)

Part Numbers : TB-118-6P (6 Connections) or TB-118-10P (10 Connections)

BEP Heavy Duty ANL Fuses BEP Digital Ammeter Shunt

For use with BEP Heavy Duty ANL Fuse Holder - 704-ANL For use with BEP digital ammeters. Also for use in the BEP Ammeter Shunt Enclosure. 80, 100, 150, 200, 250, 300, 355, 425 or 500 Amp options. For analogue ammeter shunts please contact us for pricing.

Part Numbers : 450A / 50mV shunt IP80A - 80Amp IP250A - 250Amp Dimensions: 83mm (L) x 45mm (W) x IP100A - 100Amp 44mm (H) IP300A - 300Amp IP150A - 150Amp Part Number : LB-450-50SHUNT IP400A - 400Amp IP200A - 200Amp IP450A - 450Amp

BEP Ammeter Shunt Enclosure

The 711 feature modular sized contour lock mouldings, with removable side covers, ensuring your shunt installation meets ABYC standards by covering all exposed terminals.

Dimensions: 138mm (L) x 69mm (W) x 50mm (H)

(Shunts ordered separately)

711 - takes 2 x mini shunt or 1 maxi shunt

Part Number : 711

129 Electrical - Monitoring

BEP DC Systems Monitor (DCSM)

DC Systems Monitor (DCSM) Designed and manufactured by BEP, these state of the art full colour monitors are made to meet the systems monitoring requirements of today’s modern vessel and recreational vehicle. Complex and DC electrical installations on board are becoming more common place. Additionally the increase in tank monitoring requirements for fuel, fresh, grey and black water, accurate monitoring of these systems is essential. The DCSM display features clear, extra large type face. This allows for more detailed on-screen information and increased clarity. The screen has back lighting for easy night time viewing. See sample screens below.

Specifications: *2.8” Colour QVGA LCD *Input voltage 8-32VDC *Dimensions: Width 90mm x Height 100mm *Backlit keypad

Monitors: *Charge/discharge amps for two banks *Capacity remaining in A/h and % *Battery condition *Tank fluid level *Circuit status

Features: *8 Generic, user configurable inputs *Programmable high/low audio /visual alarms for volts, amps and tank levels *Backlit keypad and dimmable screen *Can be panel or surface mounted

Comes with 1 x Shunt and 5m cable.

Part Number : 600-DCSM

Display Type: Configure the DCSM to show the data in analogue, digital and graphic form.

Tank Level: Circuit Status: DC Power Meter: View tank level information for View the status of important *Displays voltages of multiple multiple tanks in numeric and circuits (on/off) In graphic and battery banks (0-32VDC). graphic forms. Resettable when numeric form. *Displays charge and discharge leaving the boat. (amps) of 2 battery banks. *Displays battery capacity in amp hours. *High/Low level alarms

130 Electrical - Monitoring

BEP Ultrasonic Tank Sender - No Moving Parts

*Handles common outputs – 240-33, 10-180, Vetus 10-300 and 0-5 V tanks from BEP, Teleflex, Faria, VDO and many other popular instrument brands. (When connecting to non-adjustable gauges the TS1 must be pre-calibrated) *Low Profile Design and standard SAE 5 hole mounting pattern, allowing it to be retrofitted to practically all other sender brands. *Can be set for tank dimensions via computer using BEP Marine’s proprietary TS1 software, avoiding experimental tank filling on site. *Connects directly to the BEP 600-TLM-N digital tank monitor when configured to a 0-5 V output. *Is set for 0-2000 mm depth off the shelf (not suitable for tank depths less than 200 mm) *Operating voltage: 10-32 V *Current draw: 25 mA with 5 V gauge output *Measurement method: Acoustic sonic measurement *Tank depth: 0–2000 mm (6.5 ft) *Accuracy Distance: 0–2000 mm (6.5 ft) at 2 mm accuracy *Mounting: SAE 5 stud mounting pattern with gasket, seal and screws (top mount only). *Environmental temperature: 4–65 °C *Chemical resistance: Petrol, diesel, water, toilet chemicals. *Tank type style: Metal and plastic with non linear capacity. *Works with petrol, diesel, fresh water, grey water and black water.

Part Number : TS1

…the most unique and sophisticated system of any tank monitor tested… the ultrasonic technology is extremely accurate. Practical Sailor Magazine, July 2009

BEP LED Tank Level Monitor

The 600-TG offers economical monitoring for fresh or grey water tanks (plastic or fibreglass only). Using 600-TGSK strategically mounted well nuts will give 4 tank levels. Supplied with one sender kit. Second sender ordered separately.

Also available is the RV-TS Tank sender. Only one hole is required for installation, the sender is sealed via external lock nuts. Only suits tanks with maximum depth of 280mm.

Specifications: * Voltage 12V DC * Supplied with one 600-TGSK sender kit

Part Number : 600-TG

BEP Water Tank Sender Probe Kit

*Well nut hole size 3/8” (9 mm). *Cable length 5 m. *One kit supplied with 600-TG. *For use with fibreglass or plastic freshwater tanks only (not for Petrol or diesel). *Suitable for tanks deeper than 10” (280 mm)

Part Number : 600-TGSK 131 Electrical - Gas Detectors

BEP Gas Detector 600-GD

The BEP Contour Matrix Gas Detectors are the product of continuing research and development which BEP Marine Ltd devotes to their product range. The BEP Detectors use microprocessor control to ensure correct sensor sensitivity. The Detectors have the capability to control two sensors which detect both LPG and Petrol, with visual and audible alarms. There is a test switch to check operation of sensors with indicators for fault detection.

The 600-GD will detect LPG, Petrol and CNG fumes. Supplied with one sensor and has an option for a second sensor. Item # BL-SL-L output for remote alarm and blower unit. 600-DG can be used on 12 or 24V systems.

Features: * Operating Voltage 10 to 32 Volts DC * Self testing capability * Microprocessor control * Provision for external alarm * Provision for bilge blower * Dual sensor capability

Specifications: Voltage: 10V min to 32V max Supplied with one BL-SL-L sensor. (5m) Current Draw with 2 sensors: Total 350mA max Alarm Sensitivity: 20% LEL (Lower Explosive limit) Current at Outputs: 800mA max Solenoid Draw: Pulse 700mA hold at 250mA Dimensions: 66.5(H) x 88(W) x 17mm (D)

Part Number : 600-GD BEP Gas Detector 600-GDL

Has the same features as the 600-GD, with the additional ability to switch a valve on and off. The 600-GDL has a “pulse and hold” feature which allows the solenoid valve to be opened, using full power, and then reducing power to hold the valve in the open position. This reduces power consumption and heat generated whilst the valve is in the on position.

Features: * Operating Voltage 10 to 32 Volts DC * Self testing capability * Microprocessor control * Provision for external alarm * Provision for bilge blower * Dual sensor capability

Specifications: Voltage: 10V min to 32V max Current Draw with 2 sensors: Total 350mA max Alarm Sensitivity: 20% LEL (Lower Explosive limit) Current at Outputs: 800mA max Solenoid Draw: Pulse 700mA hold at 250mA Dimensions: 66.5(H) x 88(W) x 17mm (D) Compatible with the VR-2.2 Solenoid Valve and Regulator Kit. Part Number : 600-GDL 132 Electrical - Gas Detectors

BEP Gas Shut Off Switch 600-LPG

The 600-LPG is a stand alone gas shut off system with no gas detection ability. To be used in 12V systems. If 24V is needed, please contact us for more information. VR2.2 Solenoid Valve and Regulator Kit sold separately.

Part Number : 600-LPG

Solenoid Valve and Regulator Kit Solenoid Valve

*Compatible with 600-GDL or Gas Detector or 600-LPG. Compatible with 600-GDL or Gas *Solenoid voltage: 12 V or 24 V Detector or 600-LPG. *Gas outlet: 3/8 BSP The SA296COMP-12V is suitable for *Gas inlet: POL Thread countries where VR2.2 is not *Current draw: 800 mA approved. The CE approved *Current draw with GDL or PH-12V: SA296COMP-12V can be installed 0.2 A by an approved gas installer using *Regulator Flow Rate: 3 kPa. approved components from within specific markets. Note: The VR2.2 may not comply in 12V operation (24V option is some countries, and does not comply with USCG requirements. available, please contact us for more information) Please check with your local gas installer. Not for sale in the Uses 1/4” BSP thread. USA. Note: A separate regulator will need to be installed with the Part Number : VR2.2 SA296 valves.

Part Number : SA296COMP-12 12V BEP Gas Detector with Built-In Sensor 600-GDRV BEP Gas Detector FD-2 The Contour Matrix Gas Detectors are the product of continuing research and development which BEP Marine Ltd devotes to their The FD-2 is designed for an economic in-dash installation. product range. The BEP Detectors use microprocessor control to Features include clearly visible LED for safe and alarm mode, and ensure correct sensor sensitivity. The Detectors have the capability audible alarm with test function. Supplied with sensor (5 metre to control two sensors which detect both LPG and Petrol, with cable) which is capable of detecting combustible gases. visual and audible alarms. There is a test switch to check operation of sensors with indicators for fault detection. Part Number : FD-2

600-GDRV Gas Detector uses the same sensor as the 600-GD and GDL. The sensor is mounted in the front facia creating a stand alone unit. the unit is designed to be surface mounted at the lowest point in the vessel. The detector is equiped with a test button and a sensor status light. Specifications:

* Power Supply: 10-32VDC * Alarm Sensitivity: 20% LEL (Lower explosive limit) * Current Draw: 70mA (milliamps)

Part Number : 600-GDRV

Supplied with one BL-SL-L sensor. (5m)

133 Electrical

136. Battery 144 Battery 149. Bilge Pump 154. Bilge Blowers Chargers & Electrical Switches & Fans

CTEK XS 0.8 - 6 Step Battery Switches MaXtek Bilge Pump Switch Bulkhead Mounted Bilge Blower Charger 12V 0.8A Automatic Float Switch - Lalizas Inline Blower 3” CTEK MXS 5 - 8 Step Battery Dual Battery Switch - 150A Sure Bail Float Switch TMC In Line-Blower 3” Charger - 12V 5.0A Dual Battery Switch - 175A TMC In Line-Blower 4” CTEK MXS 10 - Universal Battery Battery Switch with Capped Key Bulkhead Blower - High Capacity - Charger 12V 10A Capped Key 149. Electrical 3680 L/Min CTEK M200 12V 15A Charger with Key for 10097 Cooling fan with Clip on mounting Night Mode Battery Switch Accessories & Cooling fan with Suction Cup CTEK MXS 15 - 8 Step Battery Toggle Switch - 2 Pin Marine Plugs Charger 12V 15A Toggle Switch - 3 Pin CTEK MXS 25 - 8 Step Battery EPDM cap for switch Charger 12V 25A Toggle Switch - 2 Pin Circuit Breakers - Surface Mount - CTEK XT4000 - 8 Stage Battery Toggle Switch - 2 Pin Switchable Charger 24V 4A Momentary Panel Switch - TMC Deck Plugs and Sockets CTEK XT14000 - 8 Stage Battery Splashproof Switch with LED MaXtek Cable Outlets Charger 24V 14A Splashproof Switch Stainless Steel 12V Marine CTEK D250S Dual Battery Charger Splashproof Switch Terminal Socket DC/DC Push Pull Switch Lighter Style Plug or Socket CTEK Comfort Connect TMC Toilet Switch box with fuse Marine Plug & Socket Mastervolt ChargeMaster 25 Amp MaXtek Kill Switch Keys with Marine Plug - 12V Battery Charger Lanyard Marine Socket MaXtek Kill Switch with Coil Triple 12V/24V Outlet Lanyard Plug Male 142. Inverters/ Fuse Holder Waterproof PVC Plug with Safety Ring 220-240V Ignition Starter Switch Plug Female with Cover Chargers Ignition Switch with Cap Thermo Plastic Fuse Holder MasterVolt 300 watt 12V Inverter Fuse Holder - for switch panel 151. Bus Bars & MasterVolt 500 watt 12V Inverter LED Switch Panel Lights MasterVolt Sine 800 Watt 12V Power Supplies Inverter MastervVolt Mass Combi 12/2000 147. Switch Panels Power Distribution Bar - 6 Stud Invert/Charger Power Distribution Bar - 4 Stud MasterVolt Mass Combi 12/2500 MaXtek 3 Way Switch Panel with Power Distribution Bar - 12 Way (2 Invert/Charger Lighter Socket Stud + 10 Screw) MaXtek 4 Gang - Fused Switch 230VAC - 12V or 24V Adaptor Panel MaXtek 6 Gang - Fused Switch Panel 152. Battery 6 Gang Waterproof Switch Panel 6 Gang Splashproof Switch Panel Accessories 3 Gang Waterproof Switch Panel Super Charge MRV70 12V MaXtek 4 Way Sprayproof Switch Allrounder Marine Battery Panel Battery Boxes MaXtek 5 Way Switch Panel with Battery Power Box Socket Bracket and Strap MaXtek 6 Way Sprayproof Switch Battery Strap Panel Battery Terminals - Pair 3 Gang Wave Panel + Cig Socket Jumpstart SP2 6 Gang Circuit Breaker Wave Panel Battery Cable 8 Core Shielded Cable Electrical Tape

134 135 Electrical - CTEK 12V Battery Chargers

CTEK XS 0.8 - 6 Step Battery Charger 12V 0.8A

Intelligent Electronic Charger

The XS 0.8 is easy to use and is fully automate requiring no setting adjustments.

* Charges lead-acid batteries (Wet, MF, GEL and AGM) from 1.2Ah to 32Ah * Maintenance charging for batteries from 1.2Ah to 100Ah * Maintenance pulse charging increases battery life and gives superb performance * Charges even drained batteries up to 32AH * Pulse recover of slightly sulphated batteries * Low back current drain, low ripple and input voltage independent (170-260V) * High efficiency: 85% * Delivered with two interchangeable connection leads, one with clamps, and one with eyelet terminals * The charger can be connected for months, ideal for seasonal vehicles * Compact design with mounting holes for permanent assembly

6 step Charge: 1. Desulphation 2. Bulk - Charging where 80% of the energy is returned. 3. Absorption - Final part of the charge up to 100%. The battery voltage is kept constant at the set level, during which time the current drops gradually. 4. Analyse - Charger analyses the voltage drop and tests the self- discharge. 5. Float - Float is maintenance charge at constant voltage, keeping the batteries at 100% charge. 6. Pulse - This keeps the battery in trim when not in use. The charger can be connected for months at a time.

Ideal for watercraft including boats and jetskis.

Part Number : CTEKXS0.8

136 Electrical - CTEK 12V Battery Chargers

CTEK MXS 5 - 8 Step Battery Charger - 12V 5.0A

Intelligent Electronic Charger

The MXS 5.0 is easy to use and is fully automate requiring no setting adjustments.

* 8 step, fully automatic switch mode model * Charges lead-acid batteries (Wet, MF, GEL and AGM) from 1.2Ah to 110Ah * Maintenance pulse charging increases battery life and gives superb performance * Charges even drained batteries * Pulse recover of slightly sulphated batteries * Three unique charging modes for use on small batteries, large batteries and a special cold mode that is also suitable for AGM batteries. * Low back current drain, low ripple and input voltage independent (220-240V) * High efficiency: 85% * Delivered with two interchangeable connection leads, one with clamps, and one with eyelet terminals * The charger can be connected for months, ideal for seasonal vehicles * Compact design with mounting holes for permanent assembly

8 step Charge: 1. Desulphation 2. Soft Start – Easy on the battery until charged sufficiently for bulk 3. Bulk - Charging where 80% of the energy is returned. 3. Absorption - Final part of the charge up to 100%. The battery voltage is kept constant at the set level, during which time the current drops gradually. 4. Analyse - Charger analyses the voltage drop and tests the self- discharge. 5. Recondition – Restores deeply discharged open vented batteries. 6. Float - Float is maintenance charge at constant voltage, keeping the batteries at 100% charge. 7. Maintenance – Float charging with constant voltage 8. Pulse - This keeps the battery in trim when not in use. The charger can be connected for months at a time.

Part Number : CTEKMXS5

137 Electrical - CTEK 12V Battery Chargers

CTEK MXS 10 - Universal Battery Charger 12V 10A

The MXS 10 is an ideal battery charger for your caravan, car and boat. Thanks to its SUPPLY mode the battery charger provides power even without a battery. The SUPPLY mode is indispensable when charging the battery as you avoid losing complicated program settings. Using RECOND mode, you can correct the acid stratification that often occurs in deeply discharged batteries. The battery thereby has its power restored and has a longer service life.

MXS 10 Features:

* Eight step, fully automatic switch mode model. * Charges lead-acid batteries (WET, MF, GEL and AGM) from 20Ah to 200Ah. * Maintenance charge to 300AH. * Maintenance pulse charging increases battery life and gives superb performance. * Supply mode for float maintenance for 100 % state of charge. * Charges even drained batteries. * Pulse recover of slightly sulphated batteries. * Four options: 14.4V, 14.7V, 13.6V/Supply and 15.8V/Boost. * Low back current drain, low ripple and input voltage independent (170-260V). * High efficiency: 85% * Delivered with connection lead with clamps. * The charger can be connected for months, ideal for seasonal vehicles. * Compact design with mounting holes for permanent assembly. * 2 year warranty.

Part Number : CTEKMXS10

CTEK M200 12V 15A Charger with Night Mode

The CTEK M200 (15A) is an economic 8-step, fully-automatic, switch mode battery charger that analyses, looks after, charges and maintains all types of boat batteries. The M200 has been specially developed to make boat life safer and more convenient for today’s boat owners.

CTEK M200 Features:

* Eight step, fully automatic switch mode model. * Revives, charges, checks and maintains virtually all types of 12V lead-acid batteries (WET, MF, GEL and AGM) from 28Ah to 300Ah.

* Night mode for silent charging at night time - when you select the night mode. This mode derates the current charging the batteries which in-turn means the unit doesn’t get so hot and therefore doesn’t need the internal fan running. The night mode comes at the cost of removing the Recond mode from the chargers.

* 8.4mm eyelets instead of alligator clips on the end of the DC power cable. * Desulphation mode with pulses. * Soft start for severely discharged batteries. * Recondition mode with controlled top charging recovers the capacity of a severely discharged battery. * Maintenance pulse charging increases battery life and gives superb performance. * Charges even drained batteries. * Temperature compensated for optimal charging voltage at all times. * Low back current drain, low ripple and input voltage independent (170-260V). * High efficiency: 85% * The charger can be connected for months, ideal for seasonal vehicles. * Compact design with mounting holes for permanent assembly. * 5 year warranty.

Part Number : CTEKM200

138 Electrical - CTEK 12V Battery Chargers

CTEK MXS 15 - 8 Step Battery Charger 12V 15A

The CTEK XS15000 (15A) is an economic 8-step, fully-automatic, switch mode battery charger that analyses, looks after, charges and maintains all types of batteries.

MXS 15 Features:

* Eight step, fully automatic switch mode model. * Revives, charges, checks and maintains virtually all types of 12V lead-acid batteries (WET, MF, GEL and AGM) from 50Ah to 300Ah. * Desulphation mode with pulses. * Soft start for severely discharged batteries. * Recondition mode with controlled top charging recovers the capacity of a severely discharged battery. * Maintenance pulse charging increases battery life and gives superb performance. * Supply mode for use as a power pack, battery backup (UPS) or float maintenance. * Charges even drained batteries. * Temperature compensated for optimal charging voltage at all times. * Low back current drain, low ripple and input voltage independent (170-260V). * High efficiency: 85% * The charger can be connected for months, ideal for seasonal vehicles. * Compact design with mounting holes for permanent assembly. * 2 year warranty.

Part Number : CTEKMXS15

CTEK MXS 25 - 8 Step Battery Charger 12V 25A

The MXS 25 is the perfect choice for batteries that require quick charging, including caravans, boats and the workshop. The temperature sensor adjusts the charge voltage to suit the battery’s temperature to guarantee effective battery charging in all climates. Using its SUPPLY mode, the battery charger provides power even without a battery. The SUPPLY mode is indispensable when changing the battery as you avoid losing complicated program settings. Using RECOND mode, you can correct the acid stratification that often occurs in deeply discharged batteries. The battery thereby has its power restored and has a longer service life.

MXS 25 Features:

* Eight step, fully automatic switch mode model. * Revives, charges, checks and maintains virtually all types of 12V lead-acid batteries (Wet, MF, GEL and AGM) from 50Ah to 500Ah. * Desulphation mode with pulses. * Soft start for severely discharged batteries. * Recondition mode with controlled top charging recovers the capacity of a severely discharged battery. * Maintenance pulse charging increases battery life and gives superb performance. * Supply mode for use as a power pack, battery backup (UPS) or float maintenance. * Charges even drained batteries. * Temperature compensated for optimal charging voltage at all times. * Low back current drain, low ripple and input voltage independent (170-260V). * High efficiency: 85% * The charger can be connected for months, ideal for seasonal vehicles. * Compact design with mounting holes for permanent assembly. * 2 year warranty.

Part Number : CTEKMXS25

139 Electrical - CTEK 24V Battery Chargers

CTEK XT4000 - 8 Stage Battery Charger 24V 4A

The essential maintenance charger for 24A systems on for your caravan, boat or industry application. The battery charger is well suited for year-round use as it is IP65 Rated.

CTEK XT4000 Features:

* Eight step, fully automatic switch mode model. * Revives, charges, checks and maintains virtually all types of 24V lead-acid batteries (WET, MF, GEL and AGM) from 8Ah to 100Ah, up to 250Ah maintenance. * 5 year warranty.

Using the MULTI XT 4000 gives your battery an optimum service life and operational reliability.

Part Number : CTEKXT4000

CTEK XT14000 - 8 Stage Battery Charger 24V 14A

The MULTI XT 14000 is adapted for 24V batteries, which makes it perfect for buses, trucks, larger boats or the workshops that service these vehicles. The SUPPLY mode means the battery charger provides power even without a battery. The SUPPLY mode is indispensable when changing the battery as you avoid losing complicated program settings. Using RECOND mode, you can correct the acid stratification that often occurs in deeply discharged batteries. The battery thereby has its power restored and has a longer service life.

CTEK XT14000 Features:

* Eight step, fully automatic switch mode model. * Revives, charges, checks and maintains virtually all types of 24V lead-acid batteries (WET, MF, GEL and AGM) from 28Ah to 300Ah, up to 500Ah maintenance.

Part Number : CTEKXT14000

140 Electrical - CTEK DC/DC Battery Chargers

CTEK D250S Dual Battery Charger DC/DC

The D250S DUAL charger obtains its energy from DC sources such as alternators, solar panels or wind power and optimises this power to meet the charging requirements of different battery banks. The D250S DUAL is particularly suitable for charging vehicles that do not have access to grid power supplies. Perfect for boats with one battery, boats with start and service battery, boats with start and service bank, caravan, and truck.

D250S Dual Features:

*Multi-step charging from alternators and solar panels *Battery separator that eliminates diodes and VSR relays *Maintenance charge of starter battery *Solar panel regulator with Maximum Power Point Tracking, synchronised with other current sources such as the alternator and/or wind *Simplified installation of remote batteries for bow thrusters or anchor winches

D250S Dual Benefits:

*Maximised battery life due to minimised undercharge time *Maximised battery capacity when the battery is kept fully charged to avoid harmful sulphate crystals on the lead plates and stratification of the battery acid. *Ability to take charge automatically from any power source that is connected to the CTEK D250S DUAL *Reduced charging times and costs by decreasing engine idling and the dependency on AC power onshore through efficient use of alternator and solar power *Reduced environmental impact through extended battery life and a reduced idle time *Minimal installation time and cost

Specifications:

Charging voltage: 14.4V at 77°F Charging current: 20A Type of charger: 5 step, fully automatic charging cycle Type of batteries: 12V lead-acid batteries Battery capacity: 40-300Ah Insulation: IP65 (splash and dust proof) Warranty: 2 Years

Part Number : CTEKD250S

CTEK Comfort Connect

Satisfy all the battery charging needs without any hassle. The CTEK Comfort Connect gives the opportunity to fast and simply reach even well hidden batteries. There is no need to hassle with battery clamps every time, just permanently mount Comfort Connect on every battery that needs charging and easily charge and maintain the batteries after use and for a prolonged life.

Specifications:

Terminal holes: 10.5mm Length: 400mm Works with all CTEK Chargers

Part Number : CTEKCTCONM10

141 Electrical - MasterVolt Battery Charger & Inverter

Mastervolt ChargeMaster 25 Amp Battery Charger

Nominal output voltage: 12 V Total charge current: 25 A Number of battery outlets: 3 Battery capacity range: 50-250 Ah Nominal input voltage: 120/230 V (50/60 Hz)

*Plug & play battery chargers: The ChargeMaster is a genuine plug & play battery charger, made all the easier by the MasterBus one cable system. This smart and user-friendly platform for communication and connections enables all components within your system to talk to each other. Configurations, checking, digital switching between components, full monitoring and safety: From the control panel or your computer, you have a comprehensive overview and the latest system status at your fingertips.

Part Numbers : MC1225 - (25Amp) MC12100 - (100Amp)

MasterVolt Sine 800 Watt 12V Inverter

Features: *An exceptionally effective use of the consumed input current (cos phi) > 0.98! *Faster charging of batteries, even with when the input current is limited. *Use of top quality components with a long lifespan. *Savings in weight and space. *Fewer installation materials. *Capacity between 800 W and 5 kW. *Suitable for high starting/peak loads, even up to 200% at brief consumption.

*230V/50Hz pure sine wave voltage; no faults or humming sounds from connected equipment, not even with sensitive communication and measuring equipment.

*Fully MasterBus compatible with AC Power Analyser or MasterBus Inverter Interface. *All Mastervolt inverters provide pure sine wave voltage to ensure seamless operation of the connected equipment. Mastervolt inverters are the best choice available.

*Easy and safe connection Mass products are equipped with certified industrial connection technology. The larger inverter models have internal connections, the smaller models use a cable and plug & play socket.

*Automatic switching Easy to install within a mains voltage and/or generator power system, the Mass Sine inverter can switch between sources or combine the supply using the Masterswitch or Systemswitch system.

Part Number : 24010800 (MasterVolt Sine 800 Watt 12V Inverter) (This is a 12V system. Please contact us for a 24V version.)

142 Electrical - MasterVolt Inverter/Chargers

MasterVolt AC Master 12V Inverters

With a compact, lightweight and silent AC Master you can easily convert the voltage of a 12 or 24 V battery into 230 V/50 Hz AC current the same way you would at home or work. From microwave to hairdryer, DVD player to electrical tools, laptop to flatscreen. The pure sine wave preserves your equipment without disruption, humming or lines on the TV screen, while ensuring a longer lifespan of all connected equipment and saving you the costs of all those adapters.

Features: *Silent. *Small and lightweight. *Universal plug. *Designed for recreational and semi-professional use.

Part Numbers : 28010300 - MasterVolt 300 watt 12V Inverter (This is a 12V inverter. Please contact us for a 24V version.)

28010500 - MasterVolt 500 watt 12V Inverter (This is a 12V inverter. Please contact us for a 24V version.)

MasterVolt Mass Combi Inverter/Chargers

The Mastervolt Mass Combi combines the best of both worlds, with an advanced battery charger and silent inverter rolled into one compact device. It is ideal for most boats, from sloops to 16-metre yachts, as well as for heavy mobile applications (E-mark certified).

One of the key reasons for the Mass Combi’s popularity is its versatility. The starter and service batteries are charged quickly and completely, while the inverter provides silent and clean power. When insufficient shore power is available, the Mass Combi battery provides a powerboost so that you can continue using your 230 V equipment.

Combined functionality: *Charging two individual battery banks. *Supplies 12 Volt onboard power. *Invert to 230 V/50 Hz pure sine wave voltage. *Multiple distribution and switching systems. *Powerboost from battery when shore power is limited (shore/generator support). *Parallel function.

Part Numbers : MCMAS12-2000 - MastervVolt Mass Combi 12/2000 Invert/Charger (This is a 12V system. Please contact us for a 24V version.)

MCMAS12-2500 - MasterVolt Mass Combi 12/2500 Invert/Charger (This is a 12V system. Please contact us for a 24V version.)

143 Electrical - Battery Switches & Panel Switches

Dual Battery Switch - 175A

Dual Battery Switch 175A continuous at 12 Volt Dual Battery Switch - 150A Off-1-Both-2

Dual Battery Switch Part Number : 10005 150A continuous at 12 Volt Off-1-Both-2

139mm Overall Diameter

Part Numbers : Capped Key 10001 10001-BP (Blister Packed) For 10097 Battery Switch

Part Number : 10097-018 MaXtek Battery Switch with Capped

Key Key for 10097 500 amps for 10 seconds, 100 amps continuous. Battery Switch

Includes Key Part Number : 10097-015

Part Numbers : 10097 10097-BP (Blister Packed) Toggle Switch - 3 Pin

On/OFF/On Switch

Part Number : 10249 Toggle Switch - 2 Pin

With Name Plate

Part Number : 10248 Toggle Switch - 2 Pin

ON - OFF 2PSQ suitable for 10030 & 10060 switch panels EPDM cap for switch Part Number : P10060-08 EPDM cap M10x1.0 Thread for switch P10060-08

Boot to protect against moisture and dirt. Momentary Panel Switch - TMC Part Number : P10060-18 Momentary single pole switch, panel Toggle Switch - 2 Pin mount.

with On/Off Plate Also switch replacement for TMC toilet switch assembly part no: 8384 Part Number : 10245 Part Number : 8391

144 Electrical - Panel Switches

Splashproof Splashproof Switch with LED Switch with LED

DPDT - 6 Terminals DPDT - 6 Terminals Rated 16 Amps at 12 Volt Rated 15 Amps at 12V Includes Labels Includes Labels

(On)-Off-(On) switch On-Off-On switch Momentary on both sides Part Number : 10126-01 Part Number : 10126-02

Splashproof Splashproof Switch with LED Switch with

DPDT - 5 Terminals LED Rated at 15 Amps Includes Labels SPST - 3 Terminals Rated at 15 Amps (ON)-Off-On switch On-Off switch

Momentary on one side Includes Labels

Part Number : 10125-01 Part Number : 10123-01 Splashproof Switch Splashproof Switch

SPDT - 3 Terminals SPST - 2 Terminals Rated at 15 Amps Rated at 15 Amps

On-Off-On switch On-Off switch (centre position is off) Part Number : 10112-01 Part Number : 10113-01

MaXtek Push Pull Switch TMC Toilet Switch box with fuse

This 2 position switch has Momentary Switch a brass body with a chrome complete with fuse holder. on brass knob, brass face nut, washer and backup nut. Part Number : 8384 Stainless steel Spring for long life.

Mounting stem fits into panels upto 1” thick.

12 Volt , 20 amp.

Part Numbers : 10212-2PB 10212-2-BP (Blister Packed)

145 Electrical - Kill Switches & Ignition Switches Ignition Starter Switch

ACC-OFF-IGN-START 7 terminals

MaXtek Kill Switch Keys with Includes choke function

Lanyard Maximum panel thickness 16mm Includes seven keys to Cut-out hole - 18mm fit all Johnson, Evinrude, Mercury, Yamaha and Part Number : Honda kill switches. 10274 Swivel snap hook 10274-BP (Blister Packed) prevents tangles. Ignition Switch with Cap Part Numbers : 10284 OFF - ON - START 10284-BP (Blister Packed) 5 Terminals

Supplied with 2 keys and slotted rubber cap

MaXtek Kill Switch with Coil Maximum panel thickness 30mm Lanyard Cut-out hole - 18mm diameter

Part Numbers : Part Number : 10276 10286 10286-BP (Blister Packed) Thermo Plastic Fuse Holder

Waterproof

Part Number : 11515A

Fuse Holder Waterproof PVC

To suit automotive style fuses. Fuse Holder - for switch panel

Part Number : 11517 Fuse Holder Designed to be used with switch panels 10035 and 10065-BK.

Part Numbers : P10065-04 (5A Fuse Fuse - Plastic Automotive Style Holder) P10065-05 (15A Fuse Holder) Sold in packs of 5 LED Switch Panel Lights Part Numbers : 11519-03A - 3 Amp Part Numbers : 11519-05A - 5 Amp 31386 - LED Bulb, green, 11519-10A - 10 Amp multi use 10-28V DC

31387 - LED Bulb, red, multi use 10-28V DC

146 Electrical - Switch Panels

MaXtek 3 Way Switch Panel with Lighter Socket

* Cigarette lighter and socket * Battery Meter - test two battery systems. * 12volts , 5 - 10Amps * Illuminated rocker switches; all individually fused. * 3 x 5 Amp fuses are included. Includes Labels.

Dimensions: 165mm (h) x 115mm (w) Depth required behind panel for wiring: 85mm

Part Number : 10083A (Blister Packed) MaXtek 4 Gang - Fused Switch MaXtek 6 Gang - Fused Switch Panel Panel

Black Aluminium Plate with Black Aluminium Plate with Illuminated Rocker Switches Illuminated Rocker Switches Pop out fuse holders Pop out fuse holders 20 Preprinted Labels 20 Preprinted Labels 12 or 24 Volt, Dimensions: Supplied with 5A fuses. 123mm x 114mm 165mm x 115mm Part Numbers : 10043A Part Numbers : 10043A - BP (Blister Packed) 10065-BK 10065-BK-BP (Blister Packed)

6 Gang Splashproof Switch Panel

* 6 switches with LED 6 Gang Waterproof indicators to show on. Switch Panel * Weather resistant * 30 pre-printed labels

1 x 5A ,3 x 10A, 2 x 15A 12V DC , 15A (per circuit) Resetable circuit breakers 98mm x 150mm Plastic, 190mm x 110mm 12 Volt, Part Number : 10056-BK Includes Labels

Part Numbers : 3 Gang Waterproof Switch Panel Black - 10016-BK White - 10016-WH 3 x 10A Resetable circuit breakers Plastic, 130mm x 110mm 12 Volt, Includes Labels

Part Numbers : Black - 10013-BK White - 10013-WH

147 Electrical - Switch Panels

MaXtek 6 Way Sprayproof Switch Panel

• Sprayproof inline fuse holders with fuses • Waterproof to IP56

MaXtek 5 Way Switch Panel with Dimensions: 95 H x 107 W x 75mm D Socket Label sheet included Switch Panel • Power socket 16A Part Numbers : • Sprayproof inline fuse 900-6PAN holders with fuses 900-6PAN-BP (Blister Packed) • Waterproof to IP56

95 H x 107 W x 75mm D MaXtek 4 Way Sprayproof Switch Part Numbers : 900-5WPS Panel 900-5WPS-BP (Blister Packed) • Sprayproof inline fuse holders with fuses

• Waterproof to IP56

95 H x 107 W x 75mm D

Part Numbers : 900-4WP 900-4WP-BP (Blister Packed)

3 Gang Wave Panel 6 Gang Circuit + Cig Socket Breaker Wave

* 3 switches with individual Panel circuit breakers * 12V DC Illuminated Switches * 6 Individual switches with LED * 12V DC Power Socket Indicator Lights * Resetable Circuit Breakers * Resetable Circuit Breakers * Spade wiring connectors and * Spade wiring connectors and mounting hardware included mounting hardware included * 28 Pre- selected label sheet * 28 Pre- selected label sheet supplied supplied * CE Rated * CE Approved

125mm (h) x 100mm (w) Dimensions: Requires 50mm depth for wiring 160mm (h) x 100mm (w) Requires 30mm depth for wiring Part Number : 10084 Part Number : 10018

148 Electrical - Bilge Pump Switches & Accessories

Sure Bail Float Switch

This Surebail float switch has a mercury switch for added reliability. It will operate with electrical systems from 6-32 volt DC and MaXtek Bilge Pump Switch will switch a maximum of 15 amps. There is also the facility for a manual over-ride switch. 12V Switch with auto and manual position for control of an It turns on at a water level of 44mm and off at 22mm. automatic bilge pump. 5 year warranty. 81mm X 62mm Part Number : SB1-FS Corrosion-free aluminium panel.

Part Numbers : 3206 3206-BP (Blister Packed)

Automatic Float Switch - Lalizas Deck Plugs This float switch is designed for the automatic control of electrically driven bilge pumps. and Sockets Designed with a reliable rolling-ball and switch Waterproof system that prevents rapid Chrome Plated Brass with on/off cycling found on some Plastic Cap switches and is safer than mercury switches. When Part Numbers : water lifts the chamber 3221 - 2 pin Small: 3 amp, 2 pins, 2-1/4” x 1-1/2” buoy up to 6 cm, the switch 3215 - 3 pin Small: 3 amp, 3 pins, 2-1/4” x 1-1/2” automatically turns the bilge pump on until the water is dry. 3230 - 3 pin Large: 5 amp, 3 pins, 2-11/16” x 1-3/4” This automatic float switch has a plastic housing. 3231 - 4 pin Large: 5 amp, 4 pins, 2-1/4” x 1-1/2”

Power: 12V/ 24V, Fuse: 15A max Material: ABS plastic Dimensions: L 11cm W 7cm H 6.5cm MaXtek Cable Outlets Part Number : 91549 Chrome Plated Brass Sizes refer to Cable size

Circuit Breakers - Surface Mount - 6mm Cable size has 32mm Base Switchable 16 and 19mm Cable sizes have 52mm Base Waterproof, Vapourproof, Manual switchable, Surface Mountable, Part Numbers : Manual Reset. 11593 (6mm) 11590 (16mm) Amp Rating - Part Number : 11591 (19mm) 50 Amp - 90050A 60 Amp - 90060 Blister Packs : 60 Amp - 90060-BP (Blister Packed) 11593-BP (6mm) 80 A mp - 90080 11594-BP (8mm) 100 Amp - 90100 11595-BP (10mm) 135 Amp - 90135 150 Amp - 185150F 175 Amp - 90175 149 Electrical - Plugs & Sockets

Stainless Steel 12V Marine Terminal Socket

12V Marine terminal socket made from 304 grade Stainless Steel. Comes with push on terminals, mounting screws. (2 x 20mm screws) And rubber socket cover.

Part Number : 31308 (Blister Packed)

Marine Socket Marine Plug & Socket

Cigarette style plug for accessories. Ideal for mobile phones, lights etc. 12V DC only. 12 Volt , 10 Amp * High quality Part Number : 31307 * Watertight cap * Locking system on plug * LED power indicator * Includes replacement 10A fuse

Part Number : 31306

Plug Male Marine Plug - 12V

Rated at: 16A 220-240V * Built-in 10A fuse * LED power indicator light. Part Number : 90394 Part Number : 31350

12V Cigarette Twin Socket + USB Ports Triple 12V/24V Outlet Features: * Two USB 2.0 Charger ports Can operate in both 12 and 24 Volt * Two USB outlets * LED mood light when plugged in All the metal parts are * Adustable plug for convenient location stainless steel * Extends your cigarette lighter’s capability - Twin Socket Outlet for appliances Part Number : 31353

Perfect for use with cellular phone, iPads, computers, cameras, radar detectors, portable DVD players etc. Plug can be rotated 90 degrees.

Part Number : 01339-BK

150 Electrical - Bus bars & Power Supply

Power Distribution Bar - 4 Stud

Marine grade tin plated copper bus bar on a insulated base. Solid 20mm wide bus with 6mm studs.

Max Current: 150A Max Voltage: 48V DC Dimensions: 150mm x 32mm x 35mm (H)

Part Number : 11582-04

Power Distribution Bar - 6 Stud

Marine grade tin plated copper bus bar on a insulated base. Solid 20mm wide bus with 6mm studs.

Max Current: 150A Max Voltage: 48V DC Dimensions: 232mm x 32mm x 35mm (H)

Part Number : 11582-06

Power Distribution Bar - 12 Way (2 Stud + 10 Screw)

Marine grade tin plated copper bus bar on a insulated base.

Max Current: 150A Max Voltage: 48V DC Dimensions: 150mm x 32mm x 35mm (H)

Part Number : 11582-10

Waterproof Connection Box

2 terminal strips with 4 conductors each.

Dimensions: 125mm x 75mm x 44 mm (H)

Part Number : 10094

230VAC - 12V or 24V Adaptor

Connect your 12v or 24V DC appliance to this power supply for operation of 230VAC mains.

Two models available.

Part Numbers: PL58593C NCBCDACDC Input Voltage: 220 - 240 VAC (50 - 60Hz) 100 - 230 VAC (50 - 60Hz) Output Voltage: 12V DC 24V DC Output Current : 5.8A 6.0A

Part Numbers : PL58593C - 12V DC NCBCDACDC - 24V DC 151 Electrical - Battery Accessories

Super Charge MRV70 12V Allrounder Marine Battery

Powered by EXG Technology, the ALLROUNDER battery is built tough with high temperature tolerance and better vibration resistance - fit for Marine & Leisure applications. It boasts of it’s ability to deliver high cranking and reserve capacity together with high ampere hour rating. Starting and Cyclic capability in One.

Specifications: Volts: 12 TH: 224 Battery Tray - Large CCA @ -18 Degrees: 760 Wet Weight: 25.38 RC at 25 Degrees: 160 Assembly: D Suitable for securing batteries. 20 AH Cap: 105 Terminal Type: DST Length: 305 Other Features: CV,FDH,HE,LG Plastic Battery Tray to keep a standard 24 or 27 size battery Width: 174 Height: 202 secure and snug to prevent damage to passengers, boat, equipment and battery. Part Number : MRV70 Will fit battery with the following dimensions: 304mm(l) x 175mm (w) {footprint} x 210mm (lip height)

Meets ABYC Standard E-10 and U.S. Coastguard requirements.

Part Number : 187012 Battery Boxes MaXtek Battery Power Box Made of rigid polypropylene; impervious to battery acid. The complete power solution for small craft. Easily isolate your Comes with battery strap battery for storage. Complete with electronic battery meter so you can check and ensure your battery is safe to go to sea. Easily Part Numbers : read the charge in your supply battery with a push of a button. 77000-S (Small) Plus a separate 12v DC socket is included for plugging in auxiliary 270(L) x 180(W) x 205(H) equipment such as search lights, pumps and phone chargers.

77000-L (Large) * Battery connection cables included 330(L) x 180(W) x 205(H) * 12v electrical power socket (Side of box) with separate resetable circuit breaker * Electronic Battery Condition Display Battery Strap * Front access power cable terminals for easy connection * Battery Box strap and hardware included Strap for batteries, fuel tanks * Strong carry handle and other small accessories. Internal Dimensions: Strap utilised in Part 77000 342mm (l) x 200mm (w) x Battery Boxes. 195mm (h)

Part Number : 3824 External Dimensions: 410mm (l) x 260mm (w) x 300mm (h)

Part Number : 77000-PW Bracket and Strap Battery Terminals - Pair Bracket and Strap for Battery or Fuel Tank Positive and Negative DP Battery Terminals. Lead Construction with Part Number : 3829 Brass wing nuts. Supplied as a Pair

Part Number : 3843 152 Electrical - Battery Accessories

Battery Cable

Superior quality marine cable and battery cable for use in marine battery wiring, windlass wiring, and similar applications. All cable meets or exceeds all the requirements of regulatory bodies. Our cable features a durable yet flexible PVC insulation that is resistant to acid, alkalis, abrasion, flame, gasoline, oil, ozone, moisture and fungus.

Flexible tinned copper stranding of our cable makes it easy to route and mould to any application as well as absorb vibration to avoid damage to connections.

Part Numbers - Description - Spec CAB16DS Double Shield 16mm tinned - Ø9.1mm-Lloyds approved-600V/1kV-0.196kg/m

CAB25DS Double Shield 25mm tinned - Ø11.9mm-Lloyds approved-600V/1kV-0.305kg/m

CAB35DS Double Shield 35mm tinned - Ø13.3mm-Lloyds approved-600V/1kV-0.400kg/m

CAB50DS Double Shield 50mm tinned - Ø15.3mm-Lloyds approved-600V/1kV-0.555kg/m

Available in Black only

8 Core Shielded Cable

Shielded 4-Pair Foil Shield FT-4 Low Capacitance 24 AWG Stranded Tinned Copper Drain Wire, Foam Polyolefin Insulation, 100% Aluminium Foil Shield, Grey PVC Jacket FT-4 -20° C to 75 ° C,

Certified: CSA CMG LL61365 FT-4 60 degrees C OR CSA AWM II A 150V 80 degrees C OR RU AWM E107863 VW-1 Syyle 2919

Sold Per Metre

Part Number : 1817

Electrical Tape

One pack contains 3 rolls Length: 10m Colour: Black, Green, Red

Part Number : 151068

153 Electrical - Bilge Blowers & Fans

Bulkhead Mounted Bilge Blower Inline Blower 3”

Air Flow: 90 CFM Rubber mounting gasket eliminates vibration for Dimensions: (LxWxH) quiet operation 188x143x160mm 3” intake pipe Part Numbers : Airflow: 130 CFM 6622 - 12 volt 12 Volts , 2.7 A 6623 - 24 volt Dimensions: (LxWxH) 127 x 127 x 89mm

Part Number : 13019-BK

TMC In Line-Blower 3” TMC In Line-Blower 4”

3” intake pipe 4” intake pipe Air Flow: 122CFM Air Flow: 230CFM 12 V DC , 4.5A Dimensions: (LxWxH) Dimensions: (LxWxH) 204x152x131mm 210x135x112mm ABS housing allows less vibration and dampens unwanted High Impact ABS housing allows less vibration and dampens sound. unwanted sound. Designed with spark proof motor for added safety. Designed with spark proof motor for added safety. Part Numbers : 6626 - 12 Volt Part Number : 6624 6625 - 24 Volt

Bulkhead Blower - High Capacity - 3680 L/Min

Bulkhead Mounted Blower with Bracket Provides fresh air to the bilge in order to prevent explosion. Bulkhead Mounted Bilge Blower for 3” intake pipe

Air Flow: 3680 L/Min (130 CFM) Power Source: DC 24V/2.5A Dimensions: (LxWxH) 188x143x212mm (7.41”x5.63”x8.35”) Intake Pipe: 75mm

Part Number : 6627

Cooling fan with Clip on mounting Cooling fan with Suction Cup

5” (127mm) blade 5” (127mm) blade Plugs into cigarette lighter socket. Plugs into cigarette lighter socket. Adjustable angle up to 360°. Adjustable angle up to 360°. 2 speed, 5” (1.5m) long cord. 2 speed, 5” (1.5m) long cord.

Part Number : 13064 Part Number : 13063

154

Electronics & Navigation

157. FLIR -Thermal 168. VHF Aerials 172. Binoculars

Imaging for Night VHF Aerial / Antenna with 5m Binoculars Sea Nav SAF 7x50 cable Autofocus Vision VHF Aerial / Antenna - Quick Fit Binoculars - 8 x 21 Centrefocus

VHF 1.0m Stainless Steel Antenna with carry case New FLIR MU-602 Masthead VHF 1.0m antenna with FLIR Voyager II Bracket FLIR M Series VHF Aerial 0.6m for aluminium New FLIR MD Series boats 173. Brass Clocks FLIR BHM Series AM/FM Aerial 1.8m / Antenna FLIR HM Series & Barometers with 5m cable FLIR MS Series AM/FM Aerial / Antenna - Quick FLIR Handheld Series Travel Case Time & Tide Clock Fit PathFindIR Clock Classic Sailing Ship AM/FM 1.0m Stainless Steel Signal Flag Clock Antenna Brass Ships Clock VHF 2.5m SS & UltraGlass QuickFit Brass Barometer 162. AdvanSea Antenna Barometer Open Dial Brass Pacific Omnipro UHF DVB-T/TV/FM Barometer & Thermometer Sailing Antenna Ships Clock in 15” Timber Wheel Instruments VHF/Cellular Stainless Steel Thermometer / Hydrometer / Clock QuickFit Mount Clock with wooden base Antenna Adjustable Base - QuickFit Depth S400 Series Heavy Duty Speed S400 Series Antenna Base - Fixed Position Multi S400 Series VHF/Cellular Through-Deck Mount Wind S400 Series Antenna Base Rail Mount - Wind-a S400 Series QuickFit Antenna Base Rail Mount VHF / AM / FM - band splitter 166. C Map Charts Adjustable Base for VHF Antenna Antenna Adjustable Base - QuickFit C-MAP MAX Charts 10m Extension Cable VHF C-MAP NT+ Charts 5m extension cable FastFit Jack VHF Cable Joiner 167. GPS Antennas & AIS 171. Compasses

Systems Lalizas - Ritchie Explorer Bracket Mount Compass External GPS 133 Active Marine Lalizas - Ritchie Explorer S-53 Antenna Surface Mount Compass 1240 smart GPS Antenna Lalizas - Ritchie Sport X-10b-M AdvanSea AIS TR-200 Transceiver Bracket Mount Compass AdvanSea AIS RX-100 Receiver Compass - Bracket Mount NASA Marine AIS Receiver Compass - Bracket Mount

156 FLIR - Marine Thermal Imaging for Night Vision

New FLIR MU-602

The New FLIR MU-602 is the most technologically advanced thermal night vision system available to the maritime industry today. A multi-sensor payload lets you zoom out to the horizon at night, in low visibility and in rough conditions. The base model MU-602C includes a cooled midwave infrared, high-resolution 640 x 512 thermal camera and a high-resolution 550-line color camera, so you’re assured of the sharpest video quality available, night and day. Additional sensor options include a low-light black and white camera to help with low-light situational awareness and/or a wide field of view uncooled longwave infrared, high resolution 640 x 480 thermal camera to maximize the system’s spectral range. All cameras include optical zoom.

Key Features: *Pan/tilt: all versions of the MU- / MV-Series can pan 360° continuously and tilt +/- 90°. This provides excellent situational awareness.

*Active gyro-stabilization: provides steady imagery, even in rough seas; this is critical for getting the most out of the FLIR MU- / MV- Series long-range imaging capability.

*Radar tracking: allows operators to use the FLIR MU- / MV-Series to identify and track specified radar returns, enhancing vessel safety in low visibility conditions.

*Video tracker: the user can select a given target that can be automatically tracked by the video tracker. Selecting and engaging in tracking mode is easily done by the touch of a button. Once the tracker is engaged, the camera will follow the object as long as it can be seen.

*Picture-in Picture mode: with the Picture-in-Picture mode (PIP) two sensors can be displayed on a single display. The user can select which sensor to display as full screen.

*Digital detail enhancement (DDE): assures a crisp thermal image even in scenes with extreme temperature dynamics.

*Continuous optical zoom: The FLIR MU- / MV-series have a continuous optical zoom on the thermal image allowing to have a closer look at objects which are far away.

*Ball up / Ball down installation: The FLIR MU- / MV-series can be installed in ball-up or ball-down position, giving you more flexibility installing it on your vessel.

Other Features: *Extreme long-range performance for optimal situational awareness and maritime threat detection to the horizon. *Precision gyro-stabilization and electronic stabilization for optimal performance in rough conditions. *Network-ready. *Radar slew-to-cue. *Video Tracker. *IP Addressability. *Digital Video via Ethernet. 157 FLIR - Marine Thermal Imaging for Night Vision

FLIR Voyager II / III

Voyager II is a powerful, GYRO STABILISED, multi-sensor, thermal night vision system, specifically designed for navigation and security in marine applications.

It features two thermal imaging cameras and one daylight / low light camera. One thermal imager has a wide angle field of view and is ideal for navigation and situational awareness. The other, with the narrow field of view, allows the user to zoom in on objects that are very small or far away. The Voyager overlays these images to provide a high resolution image without losing broad situational awareness.

This is the ultimate navigation tool for Superyachts.

Absolute Marine was the first international distributor to install FLIR Voyager.

FLIR Voyager III *Automatic Video Tracking *Temperature Indication

Let us show you how FLIR Voyager can enhance the security on your boat.

FLIR M Series

The Overall Winner of the DAME Award 2009 is FLIR Systems for the M-626L Series Thermal Night Vision System.

There are several models available including the New 2013 FLIR M-618CS Gyro-Stabilized, Long-Range Thermal Night Vision System. Contact us for more details.

M-Series cameras feature:

* Clearest, most detailed thermal imagery– M-Series cameras deliver up to four- times the resolution of other systems, giving you clear, sharp images with detail you never thought possible in such an affordable thermal night vision system.

* More than twice the detection range of earlier systems– The new M-Series systems use FLIR’s latest generation of thermal imagers. Featuring the highest sensitivity, and more than double the range performance of current systems, M-Series cameras let you see more - and see farther - even in the dead of night.

* M-Series systems are available with either standard resolution or high resolution thermal imagers. * Lowlight TV Camera– Provides enhanced navigational abilities during twilight hours, when operating along intracoastal waterways, and near harbour entrances. Anywhere you can see a little, the lowlight camera will help you see more.

* Colour on-screen symbology– Part of FLIR’s exclusive Accu-Point control and display technology, M-Series cameras have detailed, 3D colour on-screen symbology that gives you instant access to system status, position, and configuration.

158 FLIR - Marine Thermal Imaging for Night Vision

FLIR MD Series

The FLIR MD series is an affordable, fixed-mount thermal night vision system that helps with steering around obstacles, collision avoidance and finding people in the water at night. Simple to mount and easy to integrate into your existing electronics, MD-Series outputs standard analogue video that can be easily displayed on any monitor at the helm or other monitors on the vessel.

Key Features of the FLIR MD-324 Key Features of the FLIR MD-625

*320 x 240 resolution *640 x 480 resolution *2x, e-zoom standard *2x, 4x e-zoom standard *Ethernet-enabled control for integration into your current *Ethernet-enabled control for integration into your current electronics electronics *Compact, all weather, water proof enclosure provides for easy *Compact, all weather, water proof enclosure provides for easy mounting options mounting options *Ball up or ball down mounting *Ball up or ball down mounting

General Specifications: General Specifications: Sensor type: 320 × 240 VOx Microbolometer Sensor type: 640 × 480 VOx Microbolometer FOV: (Field of View) 24° × 18° (NTSC) FOV: (Field of View) 25° × 20° (NTSC) Focal length: 13 mm Focal length: 25 mm E-zoom: 2× E-zoom: 2×, 4x Image processing: FLIR Proprietary Digital Detail Enhancement Image processing: FLIR Proprietary Digital Detail Enhancement

Range perfomance: Range perfomance: Detect man-sized target: 440 m Detect man-sized target: 930 m Detect small vessel: 1,340 m Detect small vessel: 2,800 m

Part Numbers : MD-324 MD-625

FLIR BHM Series

The new 2013 BHM-Series complement the successful HM-Series. The HM- Series are monoculars. Many users requested bi-oculars. That is why FLIR Systems developed the BHM-Series.

Bi-oculars, like the FLIR BHM-Series are less tiring to use for the eyes than a monocular. By using a bi-ocular the ability to detect faint objects is enhanced. This means that you have more chance to detect small objects against the background. It is also easier to hold bi-oculars steady when looking at an object. An advantage if you are looking at small things which are far away.

BHM-Series are shock-resistant thermal imaging cameras. They produce a crisp image in the darkest of nights. The BHM-Series will dramatically increase your situational awareness. The BHM-can be used on all types of vessels. Yachts, commercial ships, tug boats, work boats, police and law enforcement boats will all benefit from the power of thermal imaging.

The New 2013 FLIR models come with InstAlert Palette which highlights the hottest subjects in any scene. As per the image above. 159 FLIR - Marine Thermal Imaging for Night Vision

FLIR HM Series

The New 2013 HM-Series are handheld shock-resistant thermal imaging cameras. Also known as FLIR’s First Mate and Scout. Thanks to the HM-Series, security professionals and law enforcement officers can see suspects in total darkness, through smoke, and light foliage.

Key Features of the FLIR HM Series

* New InstAlert Feature * Boating * Crisp thermal images * Security * Choice of lenses * Hunting * The HM-Series come standard with a “hot shoe” which facilitates easy external mounting. The “hot shoe” provides video FLIR Optical 2x out and power supply connection. * Extremely portable and rugged Extender * Easy-to-operate * Long battery life The HM Series can be equipped with a 2 X extender lens. It offers Part Numbers : a 12° field of view for longer range HM-224 HM-324 HM-307 performance.

Part Number: 322-0152-00

What can I see with a FLIR Handheld thermal imager?

Examples of images taken in complete darkness. The pictures illustrate three thermal images taken with a HM-324. The three image settings of the FLIR; Black Hot, White Hot, InstAlert The trees are at an approximate range of 100m Trees and fence posts are slightly warmer than the surroundings.

Image Setting: Black Hot Image Setting: White Hot The New 2013 FLIR models come with InstAlert Palette which highlights the FLIR MS Series hottest subjects in any scene. As per the image above. The new 2013 FLIR MS-Series hand held thermal imaging camera gives every boatie the power to see clearly in total darkness. It can be used for many maritime applications. Whether you are anchored in port or sailing in the open sea, you will be able to see in total darkness.

There are several models available. Contact us for more details.

Key Features of the FLIR HM Series: * New InstAlert Feature * Boating * Crisp thermal images * Security * Choice of lenses * Hunting * LED tasklight

Part Numbers : MS-224B MLS-317 MS-324B MLS-318 160 FLIR - Automotive Thermal Imaging for Night Vision

FLIR Handheld Series Travel Case

The ultimate in security and transportation for your FLIR BHM, HM & and MS series thermal imaging camera.

Removable foam inserts give you the power to create pockets for other FLIR accessories such as Lenses, USB cables, Hot Shoes, Spare Batteries etc.

This case has been moulded out of durable, hard materials to ensure it can withstand all kinds of impact. Removeablet is also created in briefcase format so you can carry around your thermal camera easily and safely.

Part Number : 4125400

Camera and accessories not included.

PathFindIR (Automotive)

The FLIR Systems PathFindIR is a compact thermal imaging camera that significantly reduces the hazards of night time driving. It enables drivers to see much further, with improved clarity, than with standard headlights. Drivers can detect and monitor pedestrians, animals, or objects on or near the road, allowing more time to react to any potential danger. PathFindIR helps to detect and recognize potential hazards in total darkness, smoke, rain and snow.

There are two models available, the Pathfinder (Camera only) and the Pathfinder Kit (Includes Camera, 7” LCD screen and everything for installation) Contact us for more details.

Excellent image quality - The PathFindIR incorporates an uncooled 320 x 240 pixels microbolometer. This maintenance free system delivers crisp video images which can be displayed on virtually any display that accepts composite video.

Wide-angle lens - The PathFindIR is equipped with an 19 mm wide angle less. It give you an extremely wide field of view (36°), resulting in excellent situational awareness.

Designed for use in harsh environments - The PathFindIR is extremely rugged. Its vital core is well protected, IP67 rated, against humidity and water. The PathFindIR can be cleaned with a hose just like any other equipment. The PathFindIR operates between -40°C and +80°C. The PathFindIR has a built-in heater to defrost its protective window. This heater is capable of defrosting a 2mm layer of ice frozen to the window within 15 minutes when ambient temperature is -30°C and wind speed against the window is 100 km/hr. The heater is automatically powered when window temperature is less than +4°C and powered down when window temperature is more than +6°C. This ensures a clear lens and perfect infrared images displayed on your monitor even in extremely cold environments.

Compact, easy to install - The PathFindIR is extremely compact (5.8 x 5.7 x 7.2 cm) and weighs only 340 grams. This allows for easy integration in any vehicle. The PathFindIR can easily be installed behind a vehicle grill or in any other compact location.

Pigtail cable - Optionally a “pigtail” cable is available. It connects to the PathFindIR and has just 2 connectors: a power connector to connect the camera to a power supply and a videoout which can be connected to practically any display that accepts composite video.

Thermal imaging for driver vision enhancement - Thermal imaging is a powerful driver’s vision enhancement system, which significantly reduces the risks of night-time driving and allows you to see up to 5x further than with headlights. It produces clear images in total darkness, smoke, rain and light fog. It needs no light whatsoever to operate.

Thanks to thermal imaging, drivers can quicker detect and recognize potential hazards and avoid deadly accidents.

161 Instruments are the core component of any yacht navigation system. The advanSea S400 series uses cutting edge technology to provide accurate data for cruisers or racers.

• Accuracy, optimal legibility, flexibility and ease of installation are the key benefits of the S400 series, together with easy intuitive operation with direct function access.

• LCD screens with wide-angle viewing and super size digits for unmatched visibility. Watertight display facia (IP66) ; displays feature an anti-fogging coating for optimal safety even in extreme conditions.

The S400 series is available with a choice of compatible transducers manufactured by Airmar or Plastimo. The instruments can also operate as ‘stand alone’ with intelligent transducers or an NMEA0183 source. DEPTH HI-PERFORMANCE DEPTH SOUNDER GIANT DIGITS (45 MM)

FEATURES

• Depth : 0.5 to 199 m* (1.6 to 652 ft) with keel offset. • Depth trend indication. • Deep and shallow alarms. • Low battery alarm. • Simulation mode.

*Depends on transducer

Part Number DEPTH S400 with thru-hull transducer PL57755 DEPTH S400, instrument only PL57748 Supplied with weather cover.

Lock in screw collar requires no tools to secure to bulkhead

Watertight gasket

162 SAILING INSTRUMENTS S400 SERIES

SPEED MULTI LOG-SPEEDO ALL THE FUNCTIONS OF GIANT DIGITS (45 MM) S400 DEPTH AND SPEED Delivers all speed, distance, time and temperature data, Choice of data displayed on 2 lines. together with countdown function.

FEATURES FEATURES • Water speed : 0-60 knots, 0-69 mph, 0-111 km/h. • Lower line : 22 mm high digits. • GPS speed if connected to compatible (NMEA0183) • Upper line : 32 mm high digits. navigator. • Depth and speed trend indication. • Total and trip log. • Proprietary Bus interface and NMEA0183 input/output. • Elapsed time and countdown race timer. • Simulation mode. • Water temperature. • Speed trend indication. • Surface speed high and low alarms. • Low battery alarm. • Simulation mode. Part Number MULTI S400 with Plastimo thru-hulls Part Number PL57759 (depth + speed transducers) SPEED S400 with Plastimo thru-hull, 30kts PL57757 MULTI S400, instrument only SPEED S400 log-speed, instrument only PL57749 PL57750 Supplied with weather cover. Supplied with weather cover.

163 SAILING INSTRUMENTS S400 SERIES

WIND WIND-a ALL ESSENTIAL WIND WIND DIRECTION INDICATION DATA ON A DIGITAL ON A 360° ANALOGUE DISPLAY DISPLAY Same features as WindS400 model. FEATURES FEATURES • Instant wind direction information in analogue and digital display. • Proprietary bus interface and NMEA0183 input/output. • Data displayed on 2 user-settable lines (upper line 32 mm high, • Simulation mode. lower line 22 mm high). • Proprietary bus interface and NMEA0183 input/output. Part Number • Wind speed (0 to 199 knots). WIND-a, complete with masthead unit + 25 m cable PL57753 • Wind direction through 360°. • Wind trend indication . WIND-a, instrument only PL57754 • Apparent and true* wind angle and speed. Supplied with weather cover. • Wind direction at 1° resolution. • VMG speed. • Wind speed alarm. • Low battery alarm. • Simulation mode. * if connected to speedometer delivering surface speed. Part Number WIND, complete with masthead unit + 25 m cable PL57751 WIND, instrument only PL57752 Supplied with weather cover. AdvanSea masthead transducer unit High quality design incorporating precision bearings and aluminium cantilever arm. Sensitivity threshold is very low to ensure an optimum accuracy even in light winds. Balanced wind vane for increased accuracy and stability at heel. Sturdy construction and watertight Part Number connector. High quality design incorporating precision bearings AdvanSea masthead transducer unit with 25 m cable PL57761 and aluminium cantilever arm.

164 SPECIFICATIONS

S400 COMMON FEATURES DEPTH MULTI SPEED WIND WIND-a External unit dimensions 112 x 112 mm 112 x 112 mm Operating voltage 10 V to 16.5 V 10 V to 16.5 V Display power consumption Below 150 mA Incl. backlighting Below 150 mA Incl. backlighting Operating temperature -10 to + 50° C -10 to + 50° C Storage temperature -20 to + 60° C -20 to + 60° C Mounting Flush mount Flush mount Drilling Ø 48 mm 48 mm Fixing Rear locking collar Rear locking collar “O” ring for bulkhead mount Yes Yes Buzzer/external alarm output Yes / Yes Yes / Yes Monochrome LCD, TN technology Screen Monochrome LCD, TN technology (Twisted Nematic) (Twisted Nematic) Backlit keys Yes Yes Backlit screen Yes, amber, 5 levels (Off, 1, 2, 3, 4) Yes, amber, 5 levels (Off, 1, 2, 3, 4) Anti-fogging screen Yes Yes LCD Transflective Transflective Waterproof rating IP66 front face IP66 front face Intuitive menu Yes Yes Weather cover Yes Yes Simulation mode Yes Yes INSTRUMENTS SPECIFIC FEATURES Depth range 0.5 to 199 m - - - Water speed - 0 to 60 knots - - Depth speed - Yes if connected through NMEA0183 - - Wind speed - - - 0 to 199 knots Wind direction - - - 0 to 180° Port-Starboard 0° / 359° True wind - - - If connected to speedometer with surface speed Depth resolution 0.1 m from 0 to 19.9 m / 1 m from 20 to 199 m - 1° in direction Speed resolution - 0.01 knt from 0 to 19.99 knt / 0.1 knt from 20 to 60 knt 0.1 knt from 0 to 19.9 knt / 1 knt from 20 to 199 knt Display damping 1 - 30 steps 1 - 30 steps NMEA0183 input ports 1 1 Speed : VHW/VTG/VLW/MTW/RMC - Depth : DPT / DBT NMEA Input sentences VHW / VTG / MWV / RMC / VWR Multi : VHW/ VTG/ DPT/ VLW/ MTW/ RMC/ DBT NMEA0183 output ports 1 1 VHW/ VLW/ MTW/ DBT/ Output sentences DBT/ DPT DPT VHW/ VLW/ MTW VPW / MWV / VWR Proprietary bus Half-Duplex series connection (38400 bauds on one wire) Half-Duplex series connection (38400 bauds on one wire) Countdown - Yes Yes - Upper line : 32 mm Upper line : 32 mm Digits size 45 mm 45 mm Lower line : 22 mm Lower line : 22 mm Units °F & °C - Feet - Metres - Knots - Km/hr - Miles/hr - V - Miles - Km Degrees - M/s - Beaufort - Knots - Km/hr - Miles/hr - V

Deep & shallow speed/ Deep & Alarms High & low depth / High & low depth / shallow speed / Strong wind / Low battery Low battery Low battery Low battery

Service and warranty For offers and conditions : Consumer Service on www.advansea.com All our instruments Engineered and manufactured by marine Plastimo’s extensive network of distributors come with a electronics specialists, the advanSea series ensures that no matter where you cruise, expert offers top performance, designed for the technical advice and unrivalled service is always 2-year warranty. extremes of marine environment. available. Transducers By purchasing an advanSea instrument, you and antennas will benefit from the worldwide support of the YEARS WARRANTY 2 1-year warranty. Plastimo network.

Misprints excepted, the descriptions in this brochure reflect the instruments specifications, on printing date. Plastimo reserves the right to alter technical specifications without notice. Photos are not binding or part of a contract. Photos : Axena - copyright Plastimo, Jean-Marie Liot, Baptiste Leglatin. 165 Electronics - C - Map Cards

C-MAP MAX Charts

Bring your electronic charts to life with MAX, the ultimate navigator, and make cruising, sailing and fishing easier, safer and more fun. You’ll benefit from the most accurate chart detail, versatile features and a wealth of important data.

Key Features of the C-Map MAX charts:

*Dynamic NavAids: Include detailed information on navigational aids, including name, color, information on frequency, range of the light, etc.

*Guardian Alarm: Performs an automatic forward-scanning check for obstacles. Use this feature as an added backup to alert you if you head toward a potentially harmful object.

* Route-check: Is an extension of Guardian Alarm, helping keep you safe by indicating obstacles along the segments between waypoints.

There are several maps and cards available for different Fishfinders and Chartplotters. Charts can be created on either SD Cards or C-Cards depending on the instrument it will be used on. Contact us for more details.

Popular Charts - MAX Popular Charts - NT+

This is the SD type card version, and will work with the AdvanSea This Map card is formatted to work with all Navman or C.56 or T.56, Navman 8084 or 8120 and Northstar M84 or M121. Northstar GPS units that take the C-card style of C-map card, Please contact us for more instruments that this card will work e.g all current models except the 8084, 8120, M84, M121. with. This NT+ format is also compatible with older units e.g. all Part Numbers : Navman 5000 series and 6000 series units and even Tracker M-AU-M222-SD 1250, 900 and 950 model units. C-Map MAX Chart (SD Card) for New Zealand, including Chatham Islands and Kermadec Islands Part Numbers : M-AU-C222 M-AU-M001-SD C-Map NT+ Chart (C-Card) for New Zealand, including C-Map MAX Chart (SD Card) for New Zealand and South Pacific Chatham Island and Kermadec Islands Islands including Vanuatu, New Caledonia, Fiji, Tuvalu, Samoa, Tonga, Nuie, Tahiti and French Polynesia. M-PC-C204 C-Map NT+ Chart (C-Card) for the South Pacific Islands which M-AU-M222 include: Vanuatu, New Caledonia, Fiji, Tuvalu, Samoa, Tonga, C-Map MAX Chart (C-Card) for New Zealand, including Chatham Nuie, Tahiti and French Polynesia. Island and Kermadec Island

MAX SD Card Chart MAX C Card Chart NT+ C Card Chart

166 Electronics - GPS Antennas & AIS

1240 smart GPS Antenna

GPS Antenna - GPS Aerial Navman 6500 GPS Reciever This GPS Antenna is designed to suit the most Navman and Northstar GPS combo units that have the LT8 ( all plastic 8 pin ) plug. e.g. Navman: TF6500 , TF6507 , TF6600 , TF8084 , TF8120 Northstar: 650 , 657 , 660 , M84 , M120

Part Number : NS004743 External GPS 133 Active Marine Antenna

External GPS Antenna with bracket High Gain active GPS antenna Fully waterproof and suitable for marine applications 133 active GPS antenna. This antenna is used for GPS devices with an SMA connection.

Brands using this antenna include; Garmin, Lowrance, Raymarine, Humminbird, Navman, Northstar, Simrad Navman and Northstar models that use this GPS aerial are: 5380, 5500, 5505, 5605, Northstar 538 etc. The PA150 antenna has a dimension of 94mm (diameter) x 135mm (height). Supplied with 10m metre of RG58 cable connected to a SMA type connector.

Part Number : PL57743 AdvanSea AIS TR-200 Transceiver

See and be seen: this new Class B AIS transceiver module enables both the transmission and reception of AIS data from your boat. Your vessel identification data is programmed into the TR-200 using the software and cable included with the transceiver.

You can also transmit a distress message using the main selection control, or turn off transmit function during races if you do not wish to be seen.

The TR-200 AIS transceiver output connects to your GPS/Plotter via the NMEA0183 interface and to your PC through a serial connector (included). An active GPS antenna is supplied with the TR200 to supply the vessel position data to the transmitter module.

Compact and waterproof to IPX7 construction.

Part Number : PL58557 AdvanSea AIS RX-100 Receiver

More Compact than the TR200, the RX-100 outputs the received AIS data transmitted by vessels with class A and B transponders on the VHF network and displays it on an AIS compatible GPS/Plotter via and NMEA 0183 interface.

The RX-100 is also supplied with a USB cable for PC applications.

Part Number : PL58558 NASA Marine AIS Receiver

The AIS engine receives AIS data, converts it to an NMEA format and outputs via a 9 pin Serial plug connector.Includes SeaClear PC Plotter software on CD - suitable for use with windows 2000 and newer.

* The AIS engine requires its own marine VHF antenna and cannot be shared with a transceiver antenna.

Part Number : NSAAIS

167 Electronics - AM/FM & VHF Aerials

VHF Aerial / Antenna with cable AM/FM Aerial 1.8m / Antenna

Available in 1.5m, 1.8m and 2.5m with 5m cable

Frequency VHF: 156-162 MHz Designed to “twin” with (7371) Radome: UltraGlass VHF antenna. Enables radio Ferrule: Nylon reception further out to sea. Antenna Type: Half wave Frequency: AM/FM Gain: 3dBi Radome: UltraGlass “Marine Gain”: 6dB Ferrule: Nylon Typical VSWR at 156.8MHz: 1.2:1 Antenna Type: Tuned Dipole DC Meter Reading: Open Circuit DC Meter Reading: Open Circuit Height: 1.8m Note: 54040 Base sold separately Note: 54040 Base sold separately Part Numbers : VHF15 1.5m (4m Cable) 7371 1.8m (5m Cable) Part Numbers : 7411 ( 1.8m ) P6004 2.5m (5m Cable) VHF Aerial / Antenna - Quick Fit AM/FM Aerial / Antenna - Quick Fit

These antennas are the only These antennas are the only marine antennas which can be marine antennas which can be removed and remounted on the removed and remounted on the boat at the user’s convenience. boat at the user’s convenience. The cable is hardwired to the The cable is hardwired to the mount (sold separately), so the mount (sold separately), so antenna can be removed without the antenna can be removed pulling or cutting the cable. without pulling or cutting the cable. Note: Requires Quick-Fit style base, sold separately Note: Requires Quick-Fit style base, sold separately Part Numbers : P6106 ( 0.45m ) P6182 ( 1.0m ) Part Numbers : P6107 ( 0.45m ) 7370 ( 1.8m ) P6183 ( 1.0m ) P6102 ( 2.5m ) 7413 ( 1.8m ) P6142 ( 2.5m ) VHF 1.0m Stainless Steel Antenna AM/FM 1.0m Stainless Steel Antenna

VHF 1.0m antenna. The P6091 offers real value for money, full AM/FM 1.0m antenna. The P6092 offers real value for money, full performance and durable construction. 5m Cable performance and durable construction. 4m Cable It comes complete with a laydown mount. It comes complete with a laydown mount.

Part Number : P6091 Part Number : P6092

Masthead VHF 1.0m antenna VHF Aerial 0.6m for aluminium with Bracket boats

Masthead VHF 1.0m UltraGlass VHF 0.6m Flexi antenna for aluminium boats. Supplied antenna complete with bracket. with mount and 2m hard wired cable. Must be installed on a suitable ground plane. Part Number : P6184 Part Number : P6087 168 Electronics - Aerials & Accessories

VHF 2.5m SS & UltraGlass QuickFit Antenna

VHF 2.5m antenna. Perfectly proportioned for larger boats. The extra height means the antenna can get a clear all-round view, maximising antenna performance.

Pro Series QuickFit Antennas are a breakthrough: the only marine antennas in the world which can be removed and remounted on the boat at the user’s convenience. The cable is hardwired to the Pro Series mount, so the antenna can be removed without pulling or cutting the cable.

LongReach Pro Series Quick Fit antennas are superbly finished, with glossy UltraGlass and stainless steel ferrules to enhance the appearance and strength of the antenna. LongReach Pro Series antennas are designed for customers who demand the best.

LongReach Pro Series antennas must be used with LongReach Pro Series Quick Fit Mounts, which give the options of side, deck or pipe mounting your antenna.

Part Number : P6123 Pacific Omnipro UHF DVB-T/TV/FM Antenna

Complete kit to enable TV and radio reception in your boat or motor home.

This Pacific Aerials UHF TV Antenna has an outstanding performance on UHF and FM bands and inside VHF fringe areas.

Strong, light assembly and design gives superior performance. Antenna is not direction sensitive so it will receive signals regardless of your boats swinging at anchor

* Enjoy crisp reception with your TV or FM radio * Complete kit to enable TV and radio reception in your boat or motor home * Compatible with Freeview HD * Covers all television and FM radio bands * Supplied complete with antenna mast and installation kit * Easy to install

Fully active antenna system for optimum reception.

Kit comprises of instalation kit, power injector & TV cable.

Part Number : P8022

VHF/Cellular Stainless Steel QuickFit Antenna Adjustable Base - QuickFit

Mount Heavy Duty

Can be used for LongReach Pro Series Quick fit VHF or cellular For VHF/Cellular or Am/FM antennas antennas. with quick fit attachments. 5m of cable is wired into the mount. 5m of cable is wired into the mount. Base Plate Dimensions: 93 x 66mm Base Plate Dimensions: 93 x 66mm Part Numbers : Use in side or deck mount P6151 (VHF) installations. P6154 (AM/FM)

Part Number : P6159

169 Electronics - Aerials Accessories

Antenna Base - Fixed Position Adjustable Base for VHF Antenna

Antenna Base - Fixed Position White nylon antenna base. UV stabilised nylon Rachet allows for full fold down. 70mm diameter base, 40 mm or 100mm high Two models available - Select part for Standard fitting not “QuickFit” pricing Part Number : 54040 Part Numbers : 54042 - 40mm high 54044 - 100mm high Antenna Adjustable Base - QuickFit

VHF/Cellular Through-Deck Mount Adjustable Base to suit QuickFit style aerials Through deck mount, for use with SeaMaster VHF or Cellular 5m Cable is attached to base which antennas allows the antenna to be easily removed and remounted. Suits aerials with the QuickFit style fitting. Part Numbers : AA000226 (VHF) P6114 (AM/FM) Stem diameter: 16mm, Base diameter: 35mm 10m Extension Cable VHF Part Number : P6115 VHF antenna 10m extension cable pack. Antenna Base Rail Mount - QuickFit Cable is fitted with a FastFit socket to connect to existing cable, Antenna Base Rail Mount - QuickFit and FastFit plug to enable connection with the P1217 to the VHF radio. VHF/Cellular or AM/FM rail mount for 1” pipe. P6020 extension cable can be used 5m cable attached to this base. with: * SeaMaster Pro Series VHF mounts Only suitable for QuickFit Antennas * SeaMaster VHF antennas * LongReach Pro Series VHF mounts Part Numbers : * LongReach VHF antennas 7356 - VHF/Cellular P6118 - AM/FM Part Number : 7361

Antenna Base Rail Mount 5m extension cable

VHF Antenna Base Rail Mount 5m extension cable For standard fitting not “QuickFit” Select VHF or AM/FM for pricing

Part Number : 7357 Part Numbers : 7360 (VHF) P7102 (AM/FM)

FastFit Jack VHF / AM / FM - band splitter Parts to make up plug as per picture. VHF / AM / FM broadcast band splitter / diplexer, with VHF and car radio plugs. Part Number : P1212

This splitter enables the use of a VHF antenna to provide VHF Cable Joiner AM/FM reception, without degrading the performance of SO239 Joiner for VHF Cable. the VHF. Part Number : P1059 Part Number : 7412 170 Navigation - Compasses

Lalizas - Ritchie B51

Ritchie accuracy and mounting versatility are the perfect combination with Explorer Bracket Mount Compasses.

Dimensions: 119mm(H) Dial Size: 69mm Night Lighting: 12-Volt Green 5 Year Warranty

Part numbers : 31240 (Black) 31241 (White) 31242 (Grey)

Lalizas - Ritchie Explorer S-53 Surface Mount Compass

The Explorer Surface Mount compasses combine size and accuracy with a push button system for easy-on mounting, easy-off storage and security.

Dimensions: 73mm(H) x 92mm(W), Dial Size: 69mm Night Lighting: 12-Volt Green Compensators: Built-in 5 Year Warranty

Part number : 31250 (Black) Lalizas - Ritchie Sport X-10b-M Bracket Mount Compass

Mount it on your deck, windsheild or dash. Here’s a compass that’s just the right size for small boats or sport vehicles.

Dimensions: 55mm(H) x 73mm(W) Dial Size: 2” / 51mm Night Lighting: 12-Volt Green

Part Number : 31201 (Black) Compass Bracket Mount Compass - Bracket Mount

Easy read with a wide 55mm Includes Backlight diameter dial. Dimensions: 130mm(H) x Ø78mm Built-in compensating magnets for added accuracy. Part Numbers : 70032-BK (Black) Dimensions: 75mm (h) x 55 (w) 70032-WH (White) OA width: 85mm

Part Numbers : 70031-BK (Black) 70031-WH (White)

171 Navigation - Binoculars

Binoculars Sea Nav SAF 7x50 Autofocus

This is a light and easy to use set of binoculars that will help you in your navigation during your cruising. The Binoculars Auto ‘Sea Nav’SAF 7x50’ combine perfectly 7x magnification power, ruby red coating of the objective lens filtering out red light and Porro K9 prisms for brighter images.

Additionally, it offers the convenience of the auto- focus, with a wide field of view of 133m at 1000m.

It also features foldable eyecups for those wearing glasses. Its rugged construction with rubber armouring will protect the binoculars, and offer you a better grip, even when the hands are wet.

The binoculars ‘Sea Nav’SAF 7x50’ come complete with strap, pouch and covers for the lenses.

Weight: 750gr Dimensions: 190 x 200 x 65mm

Part Number : 31317

Binoculars - 8 x 21 Centrefocus with carry case

Being light and compact, the ‘Sea Nav’ Centre focus 8x21 binoculars are a must for every sailor.

The 128m@1000m field of view, the 2.6mm exit pupil, the centre focus and the roof prisms provide you with high quality, comfortable vision during the day. The housing is shock resistant, while the rubber armouring allows a better grip, and protects the binoculars from impacts. Additional features are the folding eyecups, ideal even for those wearing glasses. The Compact ‘Sea Nav’ CFC 8x21 binoculars are supplied with a carry case, which can be attached to a belt.

Weight: 176gr Dimensions: 97 x 103 x 30mm

Part Number : 31318

172 Navigation - Clocks & Weather Stations

Time & Tide Clock Barometer Open Dial Brass

Dimensions: The open dial allows clear visibility to view the brass aneroid Base Diameter - 180mm movement. Face Diameter - 140mm Displays both barometric Depth 43mm scales; inches of mercury and millibars. Part Number : 11700 Base Diameter - 180mm Face Diameter - 140mm

Part Number : 11702 Clock Classic Sailing Ship Barometer & Thermometer

Classic Sailing Ship Design Displays Temperature in Celcius & Farenheit & both barometric Brass (5”) 125mm Face scales; inches of mercury and millibars. Part Number : 11704 Base Diameter - 180mm Face Diameter - 140mm

Brass Ships Clock Part Number : 11703

Roman Numerals for Hours Base Diameter - 112mm Face Diameter - 106mm Depth 48mm Ships Clock in 15” Timber Wheel

Part Number : 70014 The solid brass clock is mounted within a lovely turned and doweled solid oak ship wheel. Complete with brass mounting hanger on the back. Brass Barometer Dimensions: Base Diameter - 112mm Clock Face - 82mm Face Diameter - 106mm Timber wheel OA - 390mm Depth 48mm Part Number : 73002-15C Part Number : 70045

Thermometer / Hydrometer / Clock Clock with wooden base

Wooden with 2 pen holders. Length 272mm x Width 47mm x Height 180mm

Dimensions: (L) 217mm x (W) 28 Part Number : 11890 mm x (H) 80mm

Part Number : 11888

173

Engine & Outboard Accessories

Yamaha Connectors Steering Wheel 13” Plastic Safety Lock for Outboards 176. Martyr Brass Shut Off Valve Anodes Johnson & Evinrude Viton O-Ring Connectors 190. Steering 195. Salt-Away MaXtek Fuel Line Assembly for Yanmar Saildrive Split Anode Kit Yamaha Fittings Salt-Away 946ml Concentrate + Volvo Penta 290 Dual Prop Engine MaXtek Fuel Line Assembly for Mixer Grommet - Cone with Ring Anode Kit Mercury (New Style) Salt-Away 946ml Concentrate Steering Cable Cone and Ring Rudder Anodes MaXtek Fuel Line Assembly for Steering Cable Grommet Hull Anode - Divers Dream Mercury (Old Style) Top Hat - Round Bolt on Hull Anodes MaXtek Fuel Line Assembly for 196. Manual Top Hat - Oval Hull Anodes with Wire Johnson & Evinrude Split Well Grommet Extraction Pumps Medium Streamline Hull Anode MaXtek Universal Fuel Line Steering Cable Rubber Cone Large Streamlined Hull Anode MaXtek Fuel Line Assembly for Trim Ring - Round 14 Litre Oil Extraction Pump Tear Drop Hull Anodes Mercury (Bayonet Fittings) Trim Ring - Oval Hand Oil Pump with Brass Body Prop Nut Anodes - Complete Kit Marine Fuel Hose #365 Rubber Exhaust Cover 6.5 Litre Extraction Pump Replacement Prop Nut Anodes MaXtek Fuel Tank - 6 Gallon Stainless Steel Exhaust Transom 6L Extraction Pump - Round Body Zinc Engine Cooling Anodes MaXtek Anti – Siphon Valve Tank Fitting 4 Litre Extraction Pump Replacement Zinc Engine Cooling Fitting Suction Hand Hose Anodes Suzuki Tank Fitting Clamp Shaft Anodes 191. Outboard Streamline Shaft Anodes Limited Clearance Shaft Anodes 186. Fuel Filters Brackets

MaXtek Fuel Filter / Water 25hp Stainless Steel Platform Rise 180. ZF Engine Separator & Fall Bracket MaXtek Fuel Filter / Water Outboard Bracket to 50kg Controls Separator Outboard Rise & Fall Bracket MaXtek Fuel Filter / Water Retractable Outboard Motor ZF Engine Controls Separator -90GPH Bracket MaXtek Fuel Filter / Water Fixed Platform Outboard Bracket 182. Engine Separator Kit Fixed Low Platform Outboard MaXtek Fuel Filter / Water Bracket Controls Separator Rail Mount Aux Outboard Bracket MaXtek Fuel Filter / Water Outboard Transom Pad Twin Engine Control - Dual Action Separator-60GPH Outboard Motor Support Bracket levers Universal In-Line Fuel Filter Single Engine Control - Dual Action MaXtek Inline Fuel Filter lever 192. Outboard Single Engine Control Twin Engine Control 187. Steering Accessories Throttle & Shift Control Levers Hydrive Hydraulic Steering Kit Throttle Control - Single Lever Cable Steering Kits for Outboards Outboard Trolley Throttle Cables Transom Support Mounting Kit PropGuard Steering Engine Well Mounting Kit LZ Hydrofoil for Outboard Motors 183. Fuel Fittings Expandable Braided Sleeving Outboard Flag Bulkhead Strain Relief Outboard Flusher - Dual Flush Outboard Flusher - Single Flush MaXtek Primer Bulbs Outboard Rigging Hose and Flange MaXtek Motor Flusher with Oval Yamaha & Mercury Connectors SS Steering Wheel 15.5” Cups Johnson & Evinrude Connectors SS Steering Wheel 15.5” with MaXtek Motor Flusher with Yamaha Connectors White Grip Rectangular Cups Mercury - 2 Prong Connectors SS Steering Wheel 13.7” with Outboard Extension Handles Johnson & Evinrude Connectors Black Grip Outboard Transom Wedges Yamaha & Mercury Connectors Steering Wheel - Riviera black 175 Engine & Outboard - Anodes

Martyr Marine Anodes

Martyr™ marine Anodes provide low cost cathodic protection of ocean-going vessels, structures and equipment constructed of iron, steel, aluminum, magnesium, and other metals. Martyr is a division of the Canada Metal company and is the only manufacturer that offers all three alloys for all water environments for pleasurecraft and commercial.

Martyr Aluminium Marine Anodes

By adding small amounts of Indium to aluminium a superior better performing anode is produced. Recognised and used by all of the major engine and stern drive manufactures, Aluminium anodes are a better option in protecting your boat.

Benefits of Martyr Cadmium Free Anodes

* Environmentally friendly, our Martyr II Aluminum and Martyr III Magnesium Cadmium Free anodes are much lighter than the traditional zinc anode that they replace. Resulting in significant savings of fuel to transport and energy to install.

* Improved efficiency and performance of Cadmium Free Martyr II Aluminum Anodes results in longer life and improved corrosion protection thereby reducing the quantity of anodes required and increasing the time between replacements.

* The alloy components of our Martyr II Aluminum anode contain no cadmium and only a fraction of the zinc used in making traditional zinc anode. The two remaining components, Aluminum and Indium are non-toxic.

Features: *Better for the environment *Last longer *1/2 the weight of zinc *3.5 times more energy and protective power than zinc

Yanmar Saildrive Split Anode Kit Rudder Anodes

Martyr Cadmium Free Anode. Rudder Anodes - Aluminium Martyr Cadmium Free Anode. Aluminium Anode for Salt Water and Aluminium Anode for Salt Water and Brackish Water. Brackish Water.

Fits Yanmar SD20, SD30, SD31, SD40 Part Numbers : and SD50 Saildrives. ANOR01AL ANOR03AL Part Number : ANO1964402660KITA 47mm Diameter 95mm Diameter 6mm Thick each half 12mm Thick each half Volvo Penta 290 Dual Prop Engine Weight: 0.03kg Weight: 0.374kg

Anode Kit ANOR02AL ANOR04AL 71mm Diameter 127mm Diameter Martyr Cadmium Free Anode. 12mm Thick each half 16mm Thick each half Weight: 0.2kg Weight: 0.57kg Aluminium Anode for Salt Water and Brackish Water.

Fits Volvo 290 Dual Prop Engine

Part Number : ANO290DPKITA 176 Engine & Outboard - Hull Anodes

Hull Anode - Divers Dream

Hull Anode Divers Dream - Slotted Bolt On - Aluminium Aluminium Anode for Salt Water and Brackish Water.

Dimensions: 13mm x 152mm x 305mm (½” x 6” x 12”) Weight: 1.48kg

Part Number : ANODIVERA

Bolt on Hull Anodes Hull Anodes with Wire

ZHC Series Bolt on Anodes - Aluminium Wire on Anodes - Aluminium Aluminium Anode for Salt Water and Brackish Water. Aluminium Anode for Salt Water and Brackish Water.

Part Numbers : Part Numbers :

ANOZHC2AA ANOPMWA Dimensions: 146mm x 64mm x 19mm Dimensions: 114mm x 64mm x 17mm 13-19mm bolt holes spaced at 73mm Weight: 0.35kg Weight: 0.37kg ANOPNWA ANOZHC3AA Dimensions: 152mm x 76mm x 19mm Dimensions: 159mm x 70mm x 19mm Weight: 0.57kg 13-19mm bolt holes spaced at 57mm Weight: 0.37kg ANOPOWA Dimensions: 152mm x 102mm x 19mm ANOZHC5AA Weight: 0.77kg Dimensions: 203mm x 102mm x 19mm 13-19mm bolt holes spaced at 111mm ANOPPWA Weight: 0.79kg Dimensions: 229mm x 127mm x 21mm Weight: 1.63kg Medium Streamline Hull Anode

Medium Streamline Bolt On Anode - Aluminium Aluminium Anode for Salt Water and Brackish Water. Tear Drop Hull Anodes

Part Number : Tear Drop Bolt On Anodes - Aluminium Aluminium Anode for Salt Water and Brackish Water. ANOMM30A Dimensions: 235mm x 86mm x 19mm Part Numbers : 13mm bolt holes Weight: 0.69kg ANOT20A Dimensions: 89mm x 45mm x 35mm 6mm bolt holes spaced at 32mm Weight: 0.07kg Large Streamlined Hull Anode ANOT21A Large Streamlined Bolt On Anode - Aluminium Dimensions: 133mm x 51mm x 25mm Aluminium Anode for Salt Water and Brackish Water. 8mm bolt holes spaced at 41mm Weight: 0.18kg Part Number :

ANOMZC406A Dimensions: 219mm x 108mm x 25mm 13mm bolt holes spaced at 127mm Weight: 1.19kg

177 Engine & Outboard - Engine & Prop Nut Anodes

Prop Nut Anodes - Complete Kit

Prop Nut Anodes Complete Kit - Aluminium Aluminium Anode for Salt Water and Brackish Water.

Part Numbers Shaft Size Length OD Weight ANOPNBAC11 7/8” (22mm) 2 1/8” (54mm) 1 5/8” (41mm) 0.21kg ANOPNCAC10 1” (25mm) 3” (76mm) 1 7/8” (48mm) 0.35kg ANOPNDAC09 1 1/4” (32mm) 3 1/16” (78mm) 2 1/8” (54mm) 0.6kg ANOPNEAC08 1 3/8” (35mm) 3 1/2” (89mm) 2 3/8” (60mm) 0.65kg

Replacement Prop Nut Anodes

Replacement Prop Nut Anodes only - Aluminium Aluminium Anode for Salt Water and Brackish Water.

Part Numbers : ANOPNAB - B Replacement - suits shaft size 22mm ANOPNAC - C Replacement - suits shaft size 22mm & 29mm ANOPNAD - D Replacement - suits shaft size 32mm ANOPNAE - E Replacement - suits shaft size 35mm

Zinc Engine Cooling Anodes

Zinc Pencil Anodes complete with Brass Plug Zinc Anodes for Salt Water and Brackish Water.

Part Numbers Length Diameter NPT UNC Weight ANOE00 2” (51mm) 1/4” (6mm) 1/8” 1/4” 0.02kg ANOE0 1 3/4” (45mm) 3/8” (10mm) 1/4” 5/16” 0.04kg ANOE1 1 3/4” (45mm) 1/2” (13mm) 3/8” 3/8” 0.08kg ANOE2 2” (51mm) 5/8” (16mm) 1/2” 7/16” 0.13kg ANOE3 2” (51mm) 3/4” (19mm) 3/4” 1/2” 0.21kg

Replacement Zinc Engine Cooling Anodes

Zinc Pencil Anodes Only, no brass plug. Zinc Anodes for Salt Water and Brackish Water.

Part Number Length Diameter NPT Weight ANOEZ0 1 3/4” (45mm) 1/4” (6mm) 1/4” 0.02kg ANOEZ00 2” (51mm) 3/8” (10mm) 1/8” 0.01kg ANOEZ1 1 3/4” (45mm) 1/2” (13mm) 3/8” 0.05kg ANOEZ2 2” (51mm) 5/8” (16mm) 1/2” 0.07kg ANOEZ3 2” (51mm) 3/4” (19mm) 3/4” 0.1kg ANO272100200300Z Yanmar 1 1/8” (29mm) 3/4” (19mm) 3/8” 0.07kg

Yanmar ANO272100200300Z anode

178 Engine & Outboard - Shaft Anodes Clamp Shaft Anodes

Clamp Shaft Anodes - Aluminium Aluminium Anode for Salt Water and Brackish Water.

* Full Shaft Contact - Internal Steel Clamp Insert holds the anode completely tight to the shaft.

* Easy installation Underwater - Slotted head with lock washer & bolt retaining washers that prevent the anode from falling off.

Part Numbers Internal Diameter (mm) External Diameter (mm) Length (mm) ANOXC01A 3/4” = 19mm 56mm 65mm ANOXC03A 1” = 25.4mm 56mm 65mm ANOXC05A 1 1/8” = 28mm 54mm 54mm ANOXC07A 1 1/4” = 32mm 63mm 63mm ANOXC09A 1 1/2” = 38mm 63mm 63mm ANOXC25A 25mm 56mm 65mm ANOXC35A 35mm 70mm 78mm ANOXC40A 40mm 70mm 78mm ANOXC50A 50mm 85mm 100mm

Streamline Shaft Anodes

Streamline Shaft Anodes - Aluminium Aluminium Anode for Salt Water and Brackish Water.

* 100% Circular Radius * Interlocking halves with extra alloy around fastener

Part Numbers I.D. (mm) O.D. (mm) Length (mm) Weight (kg) ANOX01AL 19mm 54mm 54mm 0.077kg ANOX03AL 25mm 54mm 54mm 0.082kg ANOX05AL 32mm 63mm 63mm 0.114kg ANOX07AL 38mm 63mm 63mm 0.159kg ANOX08AL 44mm 82mm 73mm 0.232kg ANOX09AL 51mm 82mm 73mm 0.286kg ANOX11AL 63mm 106mm 95mm ANOX13AL 76mm 120mm 92mm

Limited Clearance Shaft Anodes

Limited Clearance Shaft Anodes - Aluminium Aluminium Anode for Salt Water and Brackish Water.

Part Numbers Inside Dia Outside Dia Length ANOC03AL 1” (25mm) 2 1/2” (63mm) 1 1/4” (32mm) ANOC05AL 1 1/4” (32mm) 2 1/2” (63mm) 1 1/4” (32mm)

FLEXOFOLD™ Prop Anode

Fits standard 3-blade Flexofold propellers from 15” through 24” Aluminium Anode for Salt Water and Brackish Water.

Part Number : ANOPNFXA Base Diameter: 2-5/8” Weight: 0.188kg

179 Engine & Outboard - ZF Engine Controls

ZF Engine Controls

ZF Marine’s propulsion control systems are at the leading edge of electronic technology for boat engine control. The product incorporates well-proven hardware and software to ensure reliability, easy operation and maintenance. A wide range of systems means optimum equipment can be chosen to specifically match the type of vessel or application – single engine, multi-engine or multi-station.

Standard features of the ZF Range Start interlock - prevents the engine from starting while the transmission is in gear.

Warm up mode - enables engine speed only with the transmission locked in Neutral. This allows the engine to get up to operating temperature more quickly in preparation for departure. Warm up mode is also useful for engine testing.

Cruise mode - is the standard operating condition. In this mode the operator has single lever control of clutch and throttle with one lever for each engine. Two engine systems can easily be operated with one hand.

Single lever mode - allows for twin engine operation of shift and throttle control utilizing one single lever.

Part Number: ZF460-4 ZF463-4 ZFMC2000-2 ZF4200

MiniCommand - Positive Control, Compact, Simple, Affordable

MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact package.

Designed for pleasure craft and some light duty commercial vessels up to 50 feet in length with a maximum of two control stations, the MiniCommand control processor incorporates the logic circuits for two engines in one compact package. This single unit design allows the MiniCommand processor to fit in smaller spaces while maintaining two completely separate operating systems.

MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head a derivative of the popular 5200 series SmartCommand control head.

MiniCommand is a reasonably priced control system having features of control systems costing significantly more. MiniCommand continues the ZF Marine Electronics tradition of making boat handling and docking easy and effortless.

180 Engine & Outboard - ZF Engine Controls

MiniCommand Technical features

*Compatible with 12 or 24 volt systems. *Diesel and Petrol engines. *Maximum two stations. *Analog throttle output (PWM, 4-20MA, 0-5V, Frequency, Dual Voltage) *CAN Interface (available). *Twin screw application built into one enclosure, with two microprocessors for redundancy (one for each engine and gear). *Single lever control of transmission direction and engine speed. *Proportional pause on emergency reversal protection. *Two on/off solenoid outputs for transmission control (ahead and astern clutches). *Start interlock relay contacts for safe engine start. *Daylight viewable LEDs (light emitting diodes) for status indication. MI2002 - MiniCommand Processor *Audible tones for warnings and faults. *Push buttons and display for ease in set up and troubleshooting. *“Open loop” synchronization of engine speed. *The MiniCommand processor is designed with side mounted plug connectors for quick and easy installations and neatly organized cable routing. *DNV & GL type approved for Ships, High Speed and Light Craft

Available Options for MiniCommand MiniCommand is compatible with ZF Marine Electronics 400, 700, MC2000, and 4000 series pluggable control heads. Tournament levers and handheld controls can also be utilized.

Automatic power selector - offers increased power supply redundancy.

“Open loop” trolling valve control - available for transmissions with electronic trolling valves. This feature controls clutch slippage for hull speeds lower than engine idle rpm. The same control heads used for clutch and throttle enable trolling valve operation in an unlimited range without additional switches. The MiniCommand processor can be ordered with or without trolling function.

Also Available in the ZF Range MicroCommander – For mechanical throttle and transmissions. Up to 5 control stations.

ClearCommand – For combinations of mechanical and electric throttle and transmissions. Up to 5 control stations.

CruiseCommand – For electrical throttle and transmissions. Up to 4 control stations.

SmartCommand – The 5200 Control Head is specific to the For electronic throttle and transmissions. SmartCommand processors. Up to 6 control stations. Control heads specific to Smart Command processors.

Please contact us for more information about packages suitable for your needs.

181 Engine & Outboard - Engine Controls

Twin Engine Control - Dual Action levers

Both gear operation and throttle is achieved on the single lever. Two levers for control of two engines. Classic binnacle styling with dual function levers. Suitable for inboards, outboards and stern drives. Not suitable for engines with heavy governor loads. Suitable for most boat/engine combinations using control cables for throttle or gears. Dual station capability (requires separate exchangers) Designed for use with Morse style cables; series 080 with Type “C” connection ends. Compatible with MT-3 type top mount controls. Cables available in different lengths.

Part Number : 60062

Single Engine Control - Dual Action lever

Both gear operation and throttle is achieved on the single lever. Designed for use with Morse cables. Cable series 080 with Type “C” connection ends. A chrome plated zinc alloy housing with Stainless Steel internal parts.

Part Number : 60060

Single Engine Control

Single lever cable control for Throttle & Shift throttle or gears. Designed for use with Morse Control Levers type cables. Chrome Plated Brass Chrome Plated Brass Part Number : 60053 Part Number : 60057

Twin Engine Control Throttle Control - Single Lever

Twin Control for two throttles Simple single lever control or clutches on a twin engine, commonly used for throttle. or one clutch and one throttle on a single engine. Chrome Plated Brass Designed for use with Morse type cables. Part Number : 60052

Chrome Plated Brass

Part Number : 60058 Throttle Cables

High Performance Engine Control Cables providing all the best features: • Patent pending splined core for superior response and feel, especially in the toughest shift cable routing. • Black HDPE outer casing for environmental durability • Steel armour casing • Teflon inner core to ensure extremely low friction • High tension strength with small bending radius • Exceeds all industry boat standards • State-of-the-art manufacturing assures consistency • Manufactured and certified to ISO 9001 / 2000

Part Numbers : 60080 (5 m cable) 60085 (5.5 m cable)

182 Engine - Fuel Fittings MaXtek Primer Bulbs

Two sizes Built-in one way valve. Available in Blister Packs Johnson & Evinrude Connectors

2105 - Fits 5/16” fuel line. Male Fuel Tank Connector 2106 - Fits 3/8” fuel line. for Johnson & Evinrude OMC Part Numbers : Part Numbers : 2042N 2105 2105-BP (Blister Packed) 2042N-BP (Blister Packed) 2106 2106-BP (Blister Packed) Yamaha & Mercury Connectors

Yamaha & Mercury Connectors Male Fuel Tank Connector for Yamaha & Mercury Female Fuel Tank Connector for Yamaha & Mercury Part Numbers : For use with 6mm internal 2050N diameter hose. 2050-BP (Blister Packed)

Part Numbers : Yamaha Connectors 2052N 2052N-BP (Blister Packed) Brass Male Fuel Tank Connector for Yamaha

Part Numbers : Johnson & Evinrude Connectors 2055 2055-BP (Blister Packed) Female Fuel Tank Connector for Johnson & Evinrude OMC For use with 6mm internal Suzuki Tank Fitting diameter hose. To Suit: Suzuki OMC Part Numbers : 2044N Part Number : 2040N 2044N-BP (Blister Packed) Brass Shut Off Valve

Yamaha Connectors Constructed of forged brass and highly recommended fuel line installation. Female Fuel Tank Connector Multitude of uses: for Yamaha *Marine fuel and oil lines For use with 6mm internal *Isolate or connect two fuel tanks diameter hose. *together *Motorcycle fuel lines Part Numbers : *Car Fuel lines 2054N 2054N-BP (Blister Packed) Female 1/4” NPT threads on each end

Part Number : 142073 Mercury - 2 Prong Connectors Johnson & Evinrude Viton O-Ring 2 Prong Female Fuel Hose Connector To Suit: Mercury Connectors

For use with 6mm internal Viton O-Ring Female Fuel Tank Connector diameter hose. for Johnson & Evinrude OMC For use with 6mm internal diameter hose. Part Numbers : 2053N Part Numbers : 2053N-BP (Blister Packed) 2032 2032-BP (Blister Packed) 183 Engine - Fuel Lines Kits

MaXtek Fuel Line Assembly for Yamaha MaXtek Fuel Line Assembly for

Includes Primer bulb and 3/8” alcohol resistant fuel line hose Johnson & Evinrude

Suits Mercury 1988-98, Mariner 1988-98 and Yamaha Includes Primer bulb and 3/8” alcohol resistant fuel line hose

* Reinforced fuel hose Suits Johnson/Evinrude Outboard Engines * UV stabilised primer bulb * Fitted with motor and * Reinforced fuel hose tank fittings * UV stabilised primer bulb * 2m length x 8mm ID hose * OEM 398549 Female * 2 year warranty Tank/Engine Connectors * Fitted with motor and Part Numbers : tank fittings 2026 * 2.1m length x 8mm ID 2026-BP (Blister Packed) hose (10mm OD hose) * 2 year warranty

MaXtek Fuel Line Assembly for Part Numbers : 2030 Mercury (New Style) 2030-BP (Blister Packed)

Includes Primer bulb and 3/8” alcohol resistant fuel line hose MaXtek Universal Fuel Line

Suits Mercury 1998 and Newer. 8mm (5/16)” fuel line x 2 metres long

* Reinforced fuel hose Includes Primer Bulb fitted with stainless steel clamps. Engine * UV stabilised primer bulb fittings not included. * Fitted with motor and tank fittings Part Numbers : * 2m length x 8mm ID hose 2024 * 2 year warranty 2024-BP (Blister Packed)

Part Numbers : 2027 2027-BP (Blister Packed)

MaXtek Fuel Line Assembly for MaXtek Fuel Line Assembly for Mercury (Old Style) Mercury (Bayonet Fittings)

Includes Primer bulb and 3/8” alcohol resistant fuel line hose Includes Primer bulb and 3/8” alcohol resistant fuel line hose

Suits Mercury 1998 and older Suits Mercury with Bayonet Fittings * Reinforced fuel hose * UV stabilised primer bulb * Reinforced fuel hose *OEM 30185A3 Mercury Male Tank Connector * UV stabilised primer bulb *OEM 20750 Mercury Engine Connector * OEM 30185A3 Mercury * Fitted with motor and Male Tank Connector tank fittings * OEM 22831A3 Mercury * 2.1m length x 8mm ID Female Engine Connector hose (10mm OD hose) * Fitted with motor and tank fittings * 2 year warranty * 2.1m length x 8mm ID hose (10mm OD hose) Part Numbers : * 2 year warranty 2028 2028-BP (Blister Packed) Part Number : 2029 184 Engine - Fuel Lines & Tank Fittings

Marine Fuel Hose #365

Trident Barrier Lined A1 Fuel Hose (Distribution, Return, Vent and Transfer) for both gasoline (petrol) and diesel (including alcohol blends). Exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, and USCG Type A1; and is NMMA Type Accepted and CE certified.

Built with best fuel, fire and age resistant formulation, 2 spiral reinforcement and unique “Barrier Liner” on inside surface of tube so fuel is not in direct contact with rubber. Provides extraordinary resistance to fuel permeation and aging, as well as fire, heat, cold and ozone. Also good Bend-ability.

5 Year Warranty

Part Numbers : FUEL08 - Fuel Hose 8mm FUEL10 - Fuel Hose 10mm FUEL12 - Fuel Hose 12mm FUEL16 - Fuel Hose 16mm

MaXtek Fuel Tank - 6 Gallon

Modern strong Fuel tank manufactured by maXtek.

Comes with a built-in fuel gauge, sturdy handle and a rugged ergonomic design means it’s perfect for the boat.

Supplied complete with fuel tank pickup with 1/4” BSP internal thread. Fuel tank adaptors are sold separately. Adaptors must be ordered separately to suit the outboard make and model.

* Manufactured from UV stabilised polyethylene * Features an easy top read fuel gauge * Easy carry moulded handle * Light weight * Rust proof * Crack resistant * Will not mark gelcoat * Tank will not dent

Capacity: 22.7 Litres 6 US gallons

Dimensions: 580mm x 285 mm x 220 mm

Part Number : 2023

MaXtek Anti – Siphon Valve Tank Fitting

Fits 3/8 inch ID fuel hose.

Industry standard anti-siphon protection on all gasoline-powered boats.Combines anti-siphon protection with a convenient hose barb design. Features 1/4 NPT threads.

In a convenient Blister Pack for easy display.

Part Number : 2031-BP

185 Engine - Fuel Filters

MaXtek Fuel Filter / Water Separator

* With aluminium mount MaXtek Fuel Filter / Water * Complete with Fuel line connections 3/8” x 1/4” NPT Separator Kit * 10 micron * For 2 and 4 stroke engines Includes: Clear bowl, Water * 240 LPH (60GPH) separator, Fuel filter element and * Fuel filter element Cast aluminium mount.

Compatible as Racor S3213; 10 micron filter 11/16”-16 UNF thread as used 60 GPH in Yamaha and Mercury Outboards Compatible as Racor #S3213, Part Numbers : 11/16”16 UNF thread as used in Yamaha and 2060 Mercury Outboards 2060-BP (Blister Packed) Petrol only and Spare filters available (2069)

Part Numbers : 2066 (includes mounting bracket - as pictured) MaXtek Fuel Filter / Water Separator 2066 - BP (Blister Packed)

* 11/16”-16 UNF thread * Closed type Filter/Separator * 240L/hr (60GPH) MaXtek Fuel Filter / Water Separator

Suit Yamaha and Mercury outboards Includes: Clear bowl, Water with external fuel filters. Replaces separator, Fuel filter element Mercury - 35-802893Q Yamaha - ABB-FUELF-IL-TR 10 micron filter 60 GPH Part Numbers : 2062 2062-BP (Blister Packed) Compatible as Racor #S3213, 11/16”16 UNF thread as used in MaXtek Fuel Filter / Water Separator Yamaha and Mercury Outboards

-90GPH Petrol only and Spare filters available (2069)

Replacement filter/water separator traps water and dirt. Part Numbers : 10 micron filter eliminates harmful 2068 (no bracket - screws straight onto engine) contaminants and removes 99% of 2068 - BP (Blister Packed) emulsified water.

*10 micron for inboard and outboard 2 and 4 stroke engines *340 LPH(90GPH) *Fuel filter element MaXtek Fuel Filter / Water Separator *Spin on *Petrol only -60GPH

Specifications: * Filter Designed to be used with Compatible as Racor S3214; screw-on clear bowl (not included) Sierra No. S18-7920 * Canister with 11/16”-16 UNF thread OMC No. 771839 * 240L/hr (60GPH) Mercury No. 35-809099 Connection Thread: 1” centre thread - 12 threads per inch Compatible as Racor S3213; 11/16”-16 UNF thread as used in Yamaha and Mercury Part Numbers : Outboards 2064 2064 - BP (Blister Packed) Part Number : 2069 186 Engine & Outboard - Fuel Filters & Steering Kits

MaXtek Fuel Filter / Water Separator MaXtek Inline Fuel Filter

-90GPH OEM Replacement 3/8” Inline fuel filter for Mercury/Mariner, Johnson and Evinrude applications. * Filter Designed to be used with OMC #398319, Sierra #S18-7831 screw-on clear bowl (not included) * Canister with 11/16”-16 UNF thread Suitable for premix and oil injected outboard * 340L/hr (90GPH) motors and assembled with a 10 micron filter media. Compatible as Racor #PFF5510 ; 11/16”- 16 UNF thread as used for both inboard and outboard 2 and 4 Body length: 70mm stock engines. Body Diameter: 26mm Hose Size: 3/8” Part Number : 2070 Part Numbers : 2074 2074 - BP (Blister Packed)

Universal In-Line Fuel Filter

High Quality Glass in line Fuel filter supplied with connections for 6mm, 8mm and 10mm fuel hoses.

*Catch dirt and particles before they reach your engine *Clear body allows visual inspection *Direct sight bowl indicates level of contamination *260 micro filter element

Part Numbers : 2072 2072 - BP (Blister Packed)

Hydrive Hydraulic Steering Kit

Hydrive Hydraulic Bull Horn Steering Kit up to 200Hp

HyDrive, Australia’s largest selling hydraulic steering for trailer caft, offers the finest in smooth, powerful steering with quality and materials that are built to last. Large horsepower outboards are handled with comfort and without feedback from engine torque.

This model is hard wearing and robust, made from anodised alumunium, and ideal for outboards. This model is the perfect alternative to other alumunium cylinders on the market as it features an electrolytic insulation design which ensures the most advanced protection against corrosion in a low priced steering clyinder.

Designed for use with single outboards up to 200HP.

* Easy to install * Complete kit with everything you need to install * Full instructions included * Made in Australia

Part Number: BOSUNKIT-1

187 Engine & Outboard -Steering Kits Cable Steering Kits for Outboards

Universal Rotary Steering System A convenient kit form especially suitable as replacement steering, that includes: * Helm * 90° Bezel * Steering Cable * Mounting Bolts * Several Cable lengths available * ISO 9001:2008 Compliant

Part Numbers : Cable Length : ST13710 10 ft cable ST13712 12 ft cable ST13714 14 ft cable ST13715 15 ft cable ST13716 16 ft cable ST13717 17 ft cable Transom Support Mounting Kit Steering Engine Well Mounting Kit

Bolts to the inside of your transom and provides an anchoring point 15° Splashwell Mounting Kit for the steering cable. Add this kit to make the splashwell the point at which the The Mechanical Steering Connection Clamp Block, can be used as push-pull cable is mounted. Includes threaded tube, splashwell a standoff from the transom guard and mounting hardware. (outboards without tilt tubes) or on a stringer (inboard model) for the steering cable. * Ball and socket motion aligns the steering cable automatically * Corrosion-resistant stainless and aluminium construction * White powder coated finish * Aluminium and stainless steel construction Compatible with TELFEX SA27254

Part Number : ST13800 Part Number : ST13802

Expandable Braided Sleeving Outboard Rigging Hose and Flange

FLEX is a lightweight, braided jacketing for Dress up, protect, and organize your outboard rigging. bundling and protecting wires, cables and These components provide an excellent system to protect cables hoses. and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose, which comes from the engine, Part Number : STFLEX to the boat. The moulded polypropylene flange is internally threaded to retain rigging hose and to make rigging adjustment simple. Bulkhead Strain Relief * Choice for most OEM boatbuilders in the U.S. * Prevents Kinks and Chaffing in Hydraulic * Perfect for most applications for an outboard Steering Hose * Distributes Strain From Bends in Hose Part Numbers : * Water Tight Gripper Fitting — No Leaks STHOSE - 64mm Hose STFLANG - Bulkhead Flange Flange Diameter: 70mm (Requires 32mm Installation Hole)

NOTE: Only bulk hose can pass through this fitting. Pre-made hoses with end fittings cannot pass through.

Part Number : STBULK 188 Engine & Outboard -Steering Wheels

SS Steering Wheel 15.5”

Stainless Steel Steering Wheel 15.5 inch Overall Diameter Teak Centre Cap

Part Number : 7805

SS Steering Wheel 15.5” with White Grip

316 Stainless Steel

Part Number : 7810W

SS Steering Wheel 13.7” with Black Grip

316 Stainless Steel

Part Number : 7810

Steering Wheel - Riviera black

Hard wearing black plastic construction 350mm diameter

Part Number : VN8001/01

Steering Wheel 13” Plastic

Durable Black Plastic

Part Number : 7812

189 Engine - Grommets , Top Hats , Trim Rings, Exhaust Fittings

Grommet - Cone with Ring Split Well Grommet

Height: 110mm No Disassembly of Diameter: 72mm Mechanical Parts Required Mounting Depth: 13mm When Replacing.

Part Number : 4307 140mm (H) X 120mm dia

Part Number : 4312 Steering Cable Cone and Ring

Height: 65mm Steering Cable Rubber Cone Diameter: 105mm Height: 109mm Part Number : 4309 Width: 103mm Mounting Hole: 69mm Bulkhead Thickness: 5mm

Part Number : 4308 Steering Cable Grommet Trim Ring - Round

68mm (H) X 105mm Dia Dimensions: Black or White Colour 3-1/2” (Diameter) 2” (Internal Diameter) Part Numbers : 4311W (White) Part Number : 4305 4311B (Black) Top Hat - Round Trim Ring - Oval

Dimensions: Dimensions: 3-1/2” (Diameter) 3-1/2” (H) x 5-1/4” (W) X 2-3/8” (Depth) 2” x 4” (Internal) 2” (Internal Diameter) Part Number : 4306 Part Number : 4303 Top Hat - Oval Stainless Steel Exhaust Transom Dimensions: 3-1/2” (H) x 5-1/4” (W) Fitting X 2-3/8” (Depth) 2” x 4” (Internal) Stainless Steel Exhaust Transom fitting - 3.0” Hose x 4 3/4” Flange Part Number : 4304 Overall length 120mm Inside diameter 72mm Rubber Exhaust Cover Outside diameter 125mm

Part Numbers : Part Number : 7574S 42511 - 75mm to 80mm OD 42512 - 100mm to 105mm OD

190 Engine & Outboard - Outboard Motor Brackets

25hp Stainless Steel Platform Rise & Fall Bracket

Superior construction means that it is possible to have a motor mounted on this bracket while towing your boat on the road. No parts to come loose or fall off due to use of pressed stainless steel pivots and shake-proof fasteners.

25hp maximum standard & 20hp maximum long (20-23”) shaft models. 58kg maximum engine weight. Applies to both 2 and 4 stroke motors.

Platform to top of timber: 475mm in raised position, 135mm in lowered position.

Vertical movement (adjustment) 340mm (13.3/8”).

Reach: 350mm. Overall width (left/right) 295mm.

Mounting footprint: 263mm fore-aft (front-back). 280mm wide (left-right) (note that the bracket can overhang the platform up to 100mm thus reducing the fore-aft space required)

Part Number : 72536 Outboard Bracket to 50kg

Rise and Fall Bracket for angled or vertical transoms.

*Stainless Construction *Mounts on angled or vertical transom *Easy Grip Handles Fixed Platform Outboard Bracket *4 Height Adjustments *Fits most style of small outboards Fixed Platform Outboard Bracket for 25hp (19kw) rated, 2 or 4 *White Poly Plastic Mount stroke motors. Lifetime marine grade 3mm stainless steel. Part Number : 90726 280 wide x 190 high x 245mm long (fore-aft). Mounting platform depth (fore-aft) required: 210mm minimum. Outboard Rise & Fall Bracket Height from top of timber to mounting platform: 175mm.

Max 15HP Part Number : 72537 Stainless Steel with white pad

*Stainless Construction *Easy Grip Handles *4 Height Adjustments *Fits most style of small outboards *White Poly Plastic Mount Fixed Low Platform Outboard Bracket Part Number : 95880 Fixed Low Platform Outboard Bracket for 10hp (7.5KW) or 38kg Retractable Outboard Motor Bracket rated (20” long shaft motors: 8hp max.). Lifetime marine grade 3mm stainless steel. Easy to use with quick release locking 260 wide x 135 high x 310 mm long (fore-aft). mechanism. Locking mechanism at both the Mounting platform depth (fore-aft) required: 270mm minimum. fully raised and lowered position. Height from top of timber to mounting platform: 95mm.

*Suitable for outboard auxilary motors up to Part Number : 72538 8Hp. *All components made from marine grade stainless steel. *Spring loaded frame assists in raising the outboard to the UP position.

Part Number : 72532 191 Engine & Outboard - Outboard Motor Brackets

Rail Mount Aux Outboard Bracket

Ideal for permanently mounting your outboard on the stern rail instead of storing it when not in use.

Constructed from rigid, non-slip UV resistant polypropylene, the bracket provides a secure and stable mount for your auxiliary outboard engine.

Designed to fit 25mm diameter rails.

Dimensions: 228 x 150 x 46mm

Part Number : 10319

Outboard Transom Pad

This pad is suitable for smaller transoms and outboards. Made from rigid, UV stabilized plastic,the pad protects against damage whilst providing a secure non-slip surface for outboard engine mounting.

230mm x 86mm, white

Part Number : 10317

Outboard Motor Support Bracket

Shock absorbing motor support bracket will protect your boat.

The support relieves strain on both the power tilt assembly and the boat transom.

Bracket can be customised to your boat and trailer. Comes with both a quick release and roller type trailer end. If your trailer has a centre roller at the rear of the trailer you will want to use the roller mount end. If you don’t have a roller available then mount the quick release bracket to the frame of the trailer drilling a 8mm hole and using the provided bolt and nut.

Bracket can be shortened to suit your trailer by cutting the inner tube. Full instructions and diagram supplied.

Part Number : 159118 Outboard Trolley

Don’t break your back! This convenient trolley allows you to move and store your small auxiliary outboard motor.

Suitable for medium-sized short or long shaft outboard motors. Maximum Carry weight: 30kg 180mm tyres make for easy manoeuvring around the driveway or garage.

Aluminium frame and teak outboard attachment. Comes in a kitset pack and requires some assembly.

Part Number : 72531

192 Engine & Outboard - Outboard Motor Accessories

PropGuard

PropGuard has been developed to assist in the:

*Protection of swimmers and divers in the water *Prevention of rope entanglement *Protect propeller when used in and around rocks and other underwater hazards *Allowing for safe operation in shallow water *Give protection to family and friends against serious injury when using an outboard motor

The Prop Guard is a simple aluminium ring that clamps onto the outboard cavitation plate and requires nothing more than a few minutes and an Allen key to fit it in place. The Prop Guard has two vertical protection bars, one either side of the lower unit that are hydrodynamically shaped to let the water flow over the surface with minimal resistance. The outer ring is also shaped much like an aeroplane wing with a thicker leading edge that tapers to the back of the ring.

Part Numbers : 98751 - Up to 5Hp 98752 - Up to 8Hp 98753 - Up to 15Hp 98754 - Up to 30Hp 98755 - Up to 50Hp

LZ Hydrofoil for Outboard Motors

The LZ torque control system ensures the ultimate in precise and effortless steering.

The features that count: - Lower fuel consumption - Straight tracking - Excellent steering at low speeds - Smoother ride - Maximum lift - Reduced planing time - Increased stability - Reduced cavitation - Effortless installation - Stainless mounting hardware included.

Part Numbers : 10121 (4 to 50hp) 10122 (over 50hp)

Outboard Flag

Fluro Orange Outboard flag Optional LED Light for night time towing.

Part Numbers : OF (Outboard flag) OFL (Outboard flag + LED light)

193 Engine & Outboard - Outboard Motor Accessories MaXtek Motor Flusher with Oval MaXtek Motor Flusher with Cups Rectangular Cups

Blister Packed Blister Packed

Part Number : 98749 Part Number : 98748

Outboard Flusher - Dual Flush Speedometer Pitot Pickup

Motor flusher with rectangle cups Pickup for Pitot tube type speedometer. allows the cooling systems to be flushed out using a garden hose. This Pitot is designed to mount on the transom. Replacement part for Please check outboard first as this is a speedos. This component is often Dual Flush System. damaged or blocked.

Part Number : SW17504 * Automatic kick up feature to prevent damage * Can be used with any pressure driven speedo up to 120Km/Hr

Outboard Extension Handles Part Number : 152618

* Robust alloy construction * Easily adusts to suit your application * Suits tiller handle with up to 46mm diameter

Part Numbers : 27118 (fixed 995mm) 27119 (telescopic 810-1125mm) Outboard Transom Wedges Safety Lock for Outboards

Outboard Transom Wedges - Add 5 Degrees of Tuck Secure your small outboard engine from theft with this easy to fit lock assembly. Improve the performance of your boat by giving your outboard more tilt control. Anti theft outboard motor locks manufactured from stainless These transom wedges fit all standard outboard engines. steel with a plastic end cap. Simply slide over the motor clamp Cast aluminium construction allows for full, positive contact handles to prevent release. Also added safety and security while between engine bracket and transom. under way as prevents the outboard motor from working loose.

*High quality, cast aluminium Suits most small outboards including Yamaha and Mercury. *Adds 5 degrees of tuck (negative tilt) to engine *Improves performance for boats with insufficient transom Length: 235 (mm) angle *Improves boat planing at low speeds Part Number : 99525 *Fits standard outboard 4-Bolt Patterns

Dimensions: Width (oa) 100m Length (oa): 286mm

Part Number : 4473

194 Engine & Outboard - Salt - Away

Salt-Away 946ml Concentrate + Mixer

Comes with the universal quick connector that attaches to your standard hose and motor flushers connections. Mixing and washdown will now be a breeze and you can just buy the refills after you have purchased this combo.

Why use Salt-Away?

*Salt-Away combined with our Auto-Mix unit speeds up your cleaning time by at least 50% *Removes all traces of salt, minimizing the corrosive effects of salt on your engine, trailer, vehicle, rods and reels. *Salt-Away is the most concentrated; Just 40mls is all you need to clean your boat, motor, trailer and all your fishing gear. Financially that works out to be from as little as $1.15 per wash. *Salt-Away is the best value for money - 1 litre of concentrate makes 512 litres. *Salt-Away, unlike some competitor products available is completely safe on all metals (including magnesium alloy), rubber and plastics, so won’t harm your marine equipment. 100% money back guarantee

Salt-Away is recommended by leading Engine Manufacturers, and is used by Royal NZ Navy, NZ Coastguard and NATO

Part Number : CLSALTM

Salt-Away 946ml Concentrate

Mixes up to 512 parts water to one concentrate.

Thats 480 Litres !!

Salt-Away is recommended by leading Engine Manufacturers, and is used by Royal NZ Navy, NZ Coastguard and NATO

Part Number : CLSALT

195 Engine & Outboard - Manual Extraction Pumps

14 Litre Oil Extraction Pump 6.5 Litre Extraction Pump

Automatic Shut-Off When Extremely handy pump and container makes Full, Preventing Overflow. this oil extractor a useful tool for engine maintenance. It is suitable for both oil & Part Number : 18549-L water applications. Designed for extracting all types of engine oils, transmission fluids, lubricants. Suitable for marine engines, stationery engines, large and small industrial machinery, motor vehicles and bikes. Can be used on non lubricants such as water from fish tanks etc.

*Easy pour spout so liquids can be poured from the container *Vacuum Relief Valve *Automatic shut-off valve to prevent over flow *Self priming extraction pump 6L Extraction Pump - *6.5L Capacity *Suitable for Oil and Water Round Body Part Number : 18547-L Self priming extraction pump. 6L Capacity Hand Oil Pump with Brass Body Suitable for Oil Shut off valve to prevent overflow Manual hand pump for removing oil from engine sump Part Number : 18548-L A good cheap option for do it yourself occasional oil changes 4 Litre Extraction Pump Complete with three hoses & adaptor Self priming extraction pump ~ Self Priming Action 4L Capacity Suitable for Oil Dimensions Shut off valve to prevent overflow Inlet hose: 8mm (Dia) x 700mm Outlet hose: 11mm (Dia) x 250mm Part Number : 18547-S Pump OD: 32mm Pump Overall length: 229mm

Part Numbers : 18533 18533 - BP (Blister Packed) Suction Hand Hose

Hose Length: 1.6m

Suitable for Petrol ,Diesel, Oil or Water

1. Place the bottom end of the hose pipe into the tank with the liquid that you wish to pump out and hold the top end of the hosepipe upright.

2. Shake the bottom end of the hose vigorously up and down until the liquid rises in the hose. Continue pumping until the liquid passes balance level.

3. Stop pumping and place top end of the hose in the container you wish to fill and the liquid will flow automatically.

Part Numbers : 70002 (Hose Diameter 19mm) 70003 (Hose Diameter 25mm) 196

Fishing

199. Bait Boards 205. Live Bait & Accesories Aerators 208. Storage &

Bait Board with Rod Holder Mount Livewell Aerating Pumps Accesories 450 x 370mm TMC Bait Bubbler Large Bait Board with Mount and TMC Live bait Aerator Pump Kit Tackle Box Locker Rod Holders 1 Tray Tackle Box Bait Board with Rail Mount 2 Tray Tackle Box High Sided Bait Board 206. Cooler BoatMates Hook Rack - 12 inch Large Bait Board BoatMates Cockpit Organizer Small Plain Bait Board Boxes & Fish BoatMates Cruisin Caddy Sprat Board Bins Deluxe Bait Board 210. Knives & Long Line Bait Board 105L Cooler Box Suction Bait and Fillet Board 70L Cooler Box Accesories Adjust a Bite Berley Canister Fish Bins (70L, 50L or 30L) NZ Anglers Mate Longline Kit Fish Bin Lids (70L, 50L or 30L) Electric Knife Sharpener Gourmet Fish Smoker MaXtek Cooler Chocks - Set of 4 Filleting / Boning Knife Gaff Anglers Mate Fillet Knife Light Sticks (Cyallum) 9 Piece Filleting Knife Set 207. Live Bait Anglers Mate Bait Knife 202. Rod Holders Tanks Skipper Mate Knife

Rod Holder - Wide Head Live Bait Tank Kits - Transom Rod Holder - Lalizas Mounted Rod Holder - Narrow Head Live Bait Tank Kits - Portable Rod Holder - Wide Head with Cap Rod Holder Black - Rectangular Top Straight Rod Holder - Flush Mount Rod Holder, PVC w SS Brackets Straight Rod Holder - Side Mount Rod Holder, SS w/PVC End Cap Removable Rod Holder - Deck Removable Rod Holder - Rail Removable Rod Holder Removable Rod Holder - Side Mounted 4 Rod Storage Rack - 2 pieces Rod holder - Side & Deck Mount Rod Rack - Clip & Loop 6 Rod Storage Rack SS Flush Mount Rod Holder SS Rod Holder - Removable Stainless Steel Vertical Rod Holder SS Flush Mount Rod Holder Rod Holder - Clamp-On Stainless Steel 3 Rod holder Rack Stainless Steel 4 Rod holder Rack Rod Holder and Storage Racks

198 Fishing - Bait Boards & Berley Canister

Bait Board with Rod Holder Mount 450 x 370mm

Our most popular Bait Board. Comes complete with alloy mount. Fits into any standard deck rod holder. The rod holder can be either vertical or angled as the board is fully adjustable. Keep all your hooks, bait and gear separate from the cutting area. Features two separate compartments for storage.

• Easily removed and stored • Fully adjustable • Mount included • Fits any standard deck mount rod holder

Board OA Dimensions: 450mm (w) x 370mm (d) x 90mm (h)

Part Number : 70200

Large Bait Board with Mount and Rod Holders

Large board complete with two additional rod holders Fits into any standard deck rod holder (requires two). The mounts are adjustable horizontally to suit the spacing of your rod holders. The rod holder style can be either vertical or angled as the board is fully adjustable. Two additional quick release rod holders are available either side of the board.

• Mounts included • Board plus two rod holders • Fully adjustable mounting system • Recessed compartments for storing knives, fishing tackle etc • Two drink holders • Drainage hole at rear

Dimensions: Board 675mm (w) x 445mm (d) x ~110mm (h) Including Rod Holders: ~220mm (h)

Part Number : 70202

Bait Board with Rail Mount High Sided Bait Board

Cutting area: 500mm x 275mm Complete with gutter at rear and drain hole. 90mm rear up stand.

Overall size: 515mm x 358mm Rod holder mount sold separately.

Part Number : 70201 Dimensions (mm): 600 (L) – 400 (W) – 100 (D) at rear 600 (L) – 400 (W) – 50 (D) at front

Part Number : BB12

199 Fishing - Bait Boards

Large Bait Board Deluxe Bait Board

Purchased with or without transom mounting kit or rod holder Complete with drain hole and gutter around cutting surface. mount. Rod holder mount sold separately. Rod holder mount sold separately. Dimensions (mm): 720 (L) x 440 (W) x 50 (D)

Dimensions (mm): 850 (L) x Part Number : BB08 450 (W) x 50 (D)

Part Number : BB04

Small Plain Bait Board

Transom mounting kit or rod holder mount sold separately. Long Line Bait Board Dimensions (mm): 600 (L) x 400 (W) x 50 (D) Multi purpose board purchased with or without transom Part Number : BB01 mounting kit or and rod holder mount.

Rod holder mount sold separately.

Dimensions (mm): 630 (L) x 500 (W) x 70 (D)

Part Number : BB10 Sprat Board

Purchased with or without transom mounting kit or rod holder mount.

Rod holder mount sold separately.

Dimensions (mm): 460 (L) x 340 (W) x 50 (D)

Part Number : BB11 Part Numbers : BB06 - Rod holder mounting kit BB07 - Transom mounting kit

Suction Bait and Fillet Board

The original super suction Bait and Fillet Board is a must have for every fishing enthusiast.

Features: Super Suction cups in each corner keep board secure while in use (included) Molded-in ruler to verify your catch size UV stabilized food grade polyethylene Easily stows when not in use Can be permanently mounted, hardware not included Ideal for boat transoms, tiny bench seats and for general food preparation in galley Replacement Super Suction 4-Pack available P/N: 2200

Mounting: Insert suction cups into the board and turn until they have securely locked into locator. Place board in desired location and press above the centre of the suction cup, until firmly in place. DO NOT moisten suction cups! Mount on clean dry surface such as fiberglass, smooth metal, glass etc. Do NOT use on rough surfaces such as wood, scratched or rough fiberglass, vinyl or textured materials.

Part Number : 72560 200 Fishing - Accessories

Adjust a Bite Berley Canister

• Only completely adjustable berley canister available on the market • Control the flow of burley attracting fish not feeding the fish • Will keep a constant unbroken burley trail flowing out from the • back of your boat. • Only burley canister designed to be sent down your anchor rope • Can cover depth range from surface down to 100 + meters • No more mess all over the back of the boat • A versatile canister – anchor, drifting, down rigging and trailing • Will hold a 1.5/1.8 and 3kg berley • Can also be used for rock fishing

Part Number : AABBERLEY

NZ Anglers Mate Longline Kit

Kit contains: 2 x floats 2 x 5mm grapnel anchors 1 x 10” hand caster backbone with 2 x stainless steel shark clips 1 x 25 trace set with snap swivels Includes handy storage basket

Part Number : NZAMLONGL

Gourmet Fish Smoker

• Heavy duty stainless steel construction • Large 18.5ltr cooking area • Bakelite heat resistant handle • Two tier cooking racks • Size is 460 x 340 x 180mm

Part Numbers : SMOKER

Gaff Light Sticks (Cyallum)

1200mm alloy handle with stainless needle point hook Yellow - Green coloured For use on a fishing rod. Part Number : GG1200 Comes with rod attachment Stickers 2 pieces per bag.

Part Numbers : 63458 - (4.5 x 29mm) 61902 - (3 x 25mm)

201 Fishing - Rod Holders

Rod Holder - Wide Head Rod Holder - Lalizas

ABS flush mount rod holder. Internal Dia: 43mm Mounts rod at 60º angle. Height: 225mm Head: 107mm x 85mm, Length: 232mm or 250mm(54072-BK). ~ 60º angle

Part Numbers : 98678 - Black 98679 - White

Rod Holder - Narrow Head

Made in Italy Head: 85 x 57mm Length: 257mm Inside Dia: 40mm

Part Numbers : 4414B -Black 4414W - White Rod Holder - Wide Head with Cap

Head: 107mm x 85mm MaXtek Rod Holder Black - Length: 232mm ID: 42mm Rectangular

Part Numbers : Top 4409B - Black, 4409W - White, Mounts rod at 60º angle. 4409CB - Cap Only Dimensions: Top - 60mm x 87mm Length ~ 235mm

Straight Rod Holder - Flush Mount Part Numbers : 54066-BK - Black Length: 236mm 54066-WH- White Outside Diameter: 84mm Inside Diameter: 43mm 54066-BK-BP - (Black Blister Packed) 54066-WH-BP - (White Blister Packed) Part Numbers : 4408W - White 4408B - Black

Straight Rod Holder - Side Mount Rod Holder, PVC w SS Brackets

Length: 235mm Ø45mm Outside Head Dia: 58mm 230mm long Inside Dia: 39mm Part Numbers : Part Numbers : 54068 - White 4412B - Black 54068B - Black 4412W - White

202 Fishing - Rod Holders

Stainless Steel 3 Rod holder Rack Rod Holder and Storage Racks

3 Rod holder and storage rack with a place to store your pliers Has a handy place to store your pliers and fillet knives. and fillet knives Made of white polypropylene that Made of Stainless Steel resists chips, cracks and can be cleaned up with soap and water Plastic Inserts to protect your fishing gear. UV Stabilizers make these rod holders durable Dimensions: 343mm(L) x 235mm(H) x 75mm(D) Part Numbers : SW13403 - 3 Rod Holder and Storage Part Number : 54082- Rack 03 54083 - 4 Rod Holder and Storage Rack (609mm x 305mm) 54084 - 6 Rod Holder and Storage Rack (609mm x 305mm)

Stainless Steel 4 Rod holder Rack Rod Holder, SS w/PVC End Cap

Stainless Steel 316 Liner extends in about 50mm

Dimensions: Dimensions: 45 x 528 x 198mm Internal Dia: 38mm Length: 260mm Width incl mounting feet: 90mm Part Number : 54082-04 Part Number : 54068-SS

4 Rod Storage Rack - 2 pieces Rod holder - Side & Deck Mount

UV Stabilised PE with Part Number : S.S. Mounting Hardware 54079-2BK

Part Number : 54034

Rod Rack - Clip & Loop 6 Rod Storage Rack Used for rod storage on the boat or at home. Black, 345mm long “Rack” is made up of For Horizontal or 1 ring and 1 clip. Vertical Rod Storage

Part Numbers : Part Numbers : 4413B - Black Horizontal: 54065-H 4413W - White Vertical: 54065-V

203 Fishing - Rod Holders

SS Flush Mount Rod Holder Stainless Steel Vertical Rod Holder

Our premium flush mount rod Beautifully finished in polished holder is robustly manufactured stainless and includes a PVC from 316 grade stainless steel liner and cap to keep water out. for corrosion resistance and The head is cast in one piece durability. The head of the holder and manufactured from 316 is cast in one piece. Marine grade stainless for superior corrosion resistance. * Polished 316 stainless * Robust construction - Cast head Vertical Rod Holder with Black * Black PVC Liner PVC Liner

241 (l) x I.D. 42mm Part Numbers : 30° mounting angle 4420 4420-BP (Blister Packed) Part Numbers : 4422 - with cap 4422BP (Blister Packed) SS Rod Holder - Removable

Made from stainless steel, this rod holder comes with a slimline gunwhale bracket. Bracket allows the user to easily remove the rod holder when not in use for convenient stowage. SS Flush Mount Rod Holder Perfect for installing the rod holder in Stainless steel flush mount rod holder. areas of high traffic where removal is prefferred. The rod holder slides Durable, economical and corrosion free. Mounts at a 30º angle. securely into the bracket.

Part Numbers : Bracket base can be mounted on 4402 - with cap either a vertical or horizontal surface 4403 - without cap Base size: 100mm x 92mm

Part Number : 54073 54073-BP (Blister Packed)

Rod Holder - Clamp-On

Highly polished Stainless steel rod holder designed to easily clamp-on to a rail. Clamps on to standard marine rails. Fits rail diameters 20mm - 25mm (3/4” to 1”)

Rod holder angle can be adjusted 180 degrees vertically to suit the best angle for your set up.

Easy to install with a twin bolt clamp

Dimensions: 230mm (L) 50mm (Dia)

Part Numbers : 54088 - Rod Holder - Clamp-On – Made of 304 Stainless Steel 54088-BP –Blister Packed Rod Holder - Clamp-On – Made of 304 Stainless Steel 54088-316 - Rod Holder - Clamp-On – Made of 316 Stainless Steel

204 Fishing - Live Bait Aerators

Livewell Aerating Pumps

Keep your bait fish alive!

Pump is extremely EASY to install and remove for cleaning. No tools needed. Just press the tab, twist the cartridge and pull it out!

• Ignition protected • High efficiency, low amp draw • Stainless steel shaft • Water-cooled motor housing • Completely sealed so it can be submerged without damage

12 Volt Motor - Standard 3/4” outlet fitting

Part Numbers : NS350 - 350 GPH - Vertical NS800 - 800 GPH - Vertical NS800H - 800 GPH - Horizontal

TMC Bait Bubbler

A portable aeration system for use with livewell style live bait tanks.

Bait Bubbles is a watertight 3.0 volt air pump that will run for up to 100 hours on two (2) alkaline “D” batteries. The case will float for a short time if accidently dropped in water and is protected against splashing, wet hands and rain.

Unit is supplied with a stainless steel adjustable clip, 30” air line tubing and weighted glass bead air stone. TMC Bait Bubbler

Part Number : 00201

TMC Live bait Aerator Pump Kit

This aerator has suction cups for fitting to bottom of tank, and is excellent for keeping your bait alive in any cooler, bait bucket or live well with a non-porous surface.

12 Volt, 250 GPH submersible pump with adjustable flow control. Supplied with battery clips on 1.2m cables.

Dimensions: spout tube: 300mm high , width overall: 130mm pump only: 120mm high (including the suction feet) x 80mm diameter.

Part Number : 02305

205 Fishing - Fish Bins & Coolers Boxes

105L Cooler Box

* Heavy duty plastic ice box with stainless clips * Keep your fish and drinks cool this summer * Use it as an extra seat on the boat * Designed to store ice for up to 5 days * Features a foam seal on the lid, sturdy lifting handles, large bore drain and non-skid pads on the base * Capacity: 105 litres

Dimensions: 490mm (h) x 910mm (w) x 470mm (d)

Part Number : 2001

70L Cooler Box

* Heavy duty plastic ice box with stainless clips * Keep your fish and drinks cool this summer * Use it as an extra seat on the boat * Designed to store ice for up to 5 days * Features a foam seal on the lid, sturdy lifting handles, large bore drain and non- skid pads on the base * Capacity: 70 litres

Dimensions: 400mm (h) x 800mm (w) x 450mm (d)

Part Number : 2000

Fish Bins (70L, 50L or 30L)

Fish Bins in 3 different sizes to suite every application. Please note that this is just the Base and does not come with the Lid.

Specifications: 30L Fish Bin: 510mm L x 385mm W x 235mm H 50L Fish Bin: 625mm L x 440mm W x 265mm H 70L Fish Bin: 670mm L x 450mm W x 330mm H

Part Numbers : 532.02 - 30L Fish Bin 555.02 - 55L Fish Bin 575.02 - 70L Fish Bin Fish Bin Lids (70L, 50L or 30L) MaXtek Cooler Chocks - Set of 4

Fish Bin lids in 3 different sizes to match our Fish Bins. Plastic Cooler Chocks that can be fixed to your boat to stop Please note that this is just the Lid and does not come with the Base. your Cooler or Ice Box moving around.

Specifications Comes as a set of 4 30L Fish Bin Lid: 515mm L x 395mm W x 25mm H and includes straps. 50L Fish Bin Lid: 625mm L x 440mm W x 30mm H 70L Fish Bin Lid: 670mm L x 450mm W x 35mm H Part Numbers : 70207 Part Numbers : 70207-BP (Blister 531.02 - 30L Fish Bin Lid Packed) 554.02 - 55L Fish Bin Lid 574.02 - 70L Fish Bin Lid

206 Fishing - Live Bait Tanks & Tackle Boxes

Live Bait Tank Kits - Transom Mounted

The ideal live bait tank set up, allowing maximum longevity of your live bait. Transom mounted bracket to be installed below water level on back of transom. Pump simply clips onto bracket and use supplied hose to attached to tank. Ideally situated on the duck board where 5 holes are drilled into the tank for continous flow of water.

Dimensions: 550mm (W)x 380mm (L)x 300m (H) - 55L Live Bait Tank 450mm (W)x 380mm (L)x 300m (H) - 45L Live Bait Tank

Part Numbers : BT03TKIT - 55L Live Bait Tank Kit (Includes Hatch, Pump, Hose and Clamps) BT02TKIT - 45L Live Bait Tank Kit (Includes Hatch, Pump, Hose and Clamps) BT03T - 55L Live Bait Tank (Tank and Hatch only) BT02T - 45L Live Bait Tank (Tank and Hatch only)

Live Bait Tank Kits - Portable

The aerator pump simply is enclosed in the tank to keep the live bait alive and fresh. Large handles allow for portable handling. This tank does not have mounting feet for transom mounting.

Dimensions: 550mm (W)x 380mm (L)x 300m (H) - 55L Live Bait Tank 450mm (W)x 380mm (L)x 300m (H) - 45L Live Bait Tank

Part Numbers : BT03PKIT - 55L Live Bait Tank Kit (Includes Hatch and Aerator Pump) BT02PKIT - 45L Live Bait Tank Kit (Includes Hatch and Aerator Pump) BT03P - 55L Live Bait Tank (Tank and Hatch only) BT02P - 45L Live Bait Tank (Tank and Hatch only)

Tackle Box Locker

Keep your tackle organised in this convenient locker. Ideal installation in the transom and stern. Add value to your boat with this great addition and enjoy the convenient access of your tackle neatly stowed. Storage Locker complete with seven handy storage compartments. This model is installed as standard equipment by many of New Zealand’s leading boat builders.

* Storage locker * 7 - compartment tackle box * Recessed modern design * Colours: White & Grey * Made in Europe by Plastimo

Spare Parts: Storage compartments available

Part Numbers : 4504 - White 4503 - Grey

207 Fishing - Tackle Boxes & Storage

1 Tray Tackle Box

* Removable organiser tray * Contoured heavy duty carry handle * Non rusting hinges and closing tab * Extra strong polypropylene construction * 25cm fish rule on top of lid

Box Dimensions: 290 x 130 x 115mm

Part Number : TB1

2 Tray Tackle Box

* 2 cantilever trays for easy storage * Contoured heavy duty carry handle * Non rusting hinges and closing tab * Extra strong polypropylene construction * 25cm fish rule on top of lid

Box Dimensions: 325 x 175 x 155mm

Part Number : TB2

BoatMates Hook Rack - 12 inch

Three large super suction cups keep this handy hook rack in place, even in the roughest conditions. Each rack holds up to 25 baits, plus a place for your fillet knife. Charter Captain tested on the Great Lakes. Easily stows away when not in use. Use several to organize baits for different species, or water and structure variations.

Part Number : 2110-1

208 Fishing - Storage & Accessories

BoatMates Cockpit Organizer

This easy to mount organizer holds your fishing gear, binoculars or personal items. Keeps baits, pliers, fillet knife safe and organized. Mounts on a flat surface. Great for small boats with limited cockpit storage.

With a new all-resin design, the cockpit organizer won’t rust or corrode. Its injection moulded, commercial grade resin provides superior durability and an attractive appearance.

The holder can be mounted with Tempress’ Super-Suction cups or screw mounted.

Part Number : 2133-1

BoatMates Cruisin Caddy

This easy to mount organizer holds your favorite beverage, personal items and even a couple of your favorite lures. Mounts on a flat surface. Great for small boats with limited cockpit storage.

With a new all-resin design, the cruisin caddy won’t rust or corrode. Its injection moulded, commercial grade resin provides superior durability and an attractive appearance.

The holder can be mounted with Tempress’ Super-Suction cups or screw mounted.

Part Number : 2131-1

Electric Knife Sharpener

This Electric Knife Sharpener is a great simple, quick and effective way to sharpen your fillet knives, kitchen knives, any knives really.

There is no skill needed to do this as its electric, it does it all for you. This handy gadget is the perfect way to get more use out of dull knives, by using a two-stage sharpening system that gives you professional results. A blunt knife is a dangerous knife and can slip easily when filleting fish or preparing food, whereas a sharp knife slices through fish/meat and vegetables with very little pressure making it easier to control the blade and can make food preparation quick and enjoyable.

Specifications: Voltage: 220-230 volt AC (household plug) Sharpening Angle: 15°

Part Number : WFT-28D

209 Fishing - Knives

Filleting / Boning Knife Anglers Mate Fillet Knife

This is the perfect sized fillet knife. Anglers stainless steel filliting knife and Soft grip rubber for better control and easy sheath. on the hands Length of blade: 210mm * 143mm blade * Marine grade 316 Stainless Part Number : 5189

Part Number : 70195

Anglers Mate Bait Knife 9 Piece Filleting Knife Set

Bait Knife with Rubber Grip Handle and Kit Includes: Sheath. 215mm overall length of blade and *Carry case handle. *Small Fillet Knife with 15cm Stainless Steel Blade *Large Fillet Knife with 20cm Stainless Steel Blade Part Number : 206B *Combination Stainless Knife and Fish Scaler *Sharpening steel *Scale with compass and Tape Measure *Stainless Steel Utility Scissors *Sure Grip Fillet Glove *34cm x 25cm Fillet Board

Part Number : WL-1004

Skipper Mate Knife

Stainless Steel Multifunction Tool

Features include: Knife , Bottle opener , Marlin Spike , Shackle Key , Ruler and Key Ring.

Part Number: 11476

210

Fittings & Vents

213. Vents 217. Deck Fillers 221. Hinges 226. Ladders

Streamline Dorade Box Vent Chrome Deck Fillers Hinge 63mm x 40mm 2 Step SS Telescopic Ladder Rectangular Vent with Deck Filler - Stainless Steel Hinge 100mm x 40mm Ladder - 2 + 1 Step Dorade Box MaXtek Deck Filler SS 1.5” with Hinge 135mm x 40mm Ladder - 3 Rung vertical 70mm Low Profile PVC Vent Key Hinge SS - 100mm x 40mm 3 Step SS Under Transom Ladder 70mm High Profile PVC Vent MaXtek Deck Filler SS 2”with Key Hinge SS - 62mm x 37mm 3 Step SS Telescopic Ladder Solar Powered Vent MaXtek Nylon Deck Filler Hinge 80mm x 60mm 4 Step SS Telescopic Ladder Solar Powered Vent with Stainless Fuel Filler - Plastic with Cover Hinge 100mm x 60mm Ladder 5 Step Folding w Handrail Steel Cover Fuel Filler - Plastic with Lip Hinge 70mm x 40mm Teak Boarding Platform & Ladder Plastic Ventilator Fuel Filler - Plastic Hinge 90mm x 40mm Mushroom Type Vent Hinge 108mm X 40mm 100mm Low Profile PVC Vent 100mm High Profile PVC Vent 218. Bungs 227. Rails & Steps Square Vent 118mm X 118mm 222. Catches , Pipe Connector for Square Vent Oval Bung ¾” Chrome Hand Rails - Stainless Steel Divisible Rectangular Ventilator Stainless Steel Drain Plug Latches , Clips Hand Rails - Full Stainless Steel Louver Vent 267mm X 89mm MaXtek Large Bung with Cut Off Hand Rails - SS with Black End Barrel Bolt - Plastic Rectangular Vent 206 X 106mm Base Chromed Brass Grab Handle Door Clips ABS Louver Vent 260mm x 125mm MaXtek Automatic Drain Plug Stainless Steel Rail & Teak Barrel Bolt - Chrome ABS Louver Vent 140mm x 125mm Expanding Bung - Snap (lever) Footrest Brass Door Hook Louver Vent 127mm X 112mm Expanding Bung - Twist Type Hand Rails - SS with Wave Grip Hatch Fastener 316 Stainless Steel Louver Vent 228mm X 127mm Small Bung - Plastic Hand Rail - Teak Door Fastener - Chromed Brass 8 Louver Vent - Stainless Steel Large Bung - Plastic Hand Rail - Plastic Anti-Rattle Door Keeper 6 Louver Vent - Stainless Steel Expanding Bung - Twist Type Step for Mast Door Stop & Catcher Round 5” SS Louvre Vent Wood Drain Plugs Rail Mount Bracket Stainless Hatch Cover Pull-Up Midget Ventilators Mast Step - Folding Step Marine Padlock “SeaLock” Clam Shell Vent Stainless Marine Rigging Screws Brass Coat Hook 10 Louver Vent - Stainless Steel Plastic Tube Clips 4 Louver Vent - Stainless Steel Hawse Pipe 3 Louver Vent - Stainless Steel 219. Bollards, SS Lift Handle Scoop Vent Flush Latch SS316 - 2 Finger Clam Shell Vent Large Cleats , Fairleads MaXtek Flush Lifting Handle etc... Lifting Ring 80mm x 19mm Flush Ring Pull Latch 216. Fuel Tank Bollard - Polished Bronze 2” Flush Latch 316SS Premium Retractable Cleat (6”) Heavy Duty Latch Vents Cleat - Retractable Snap Shackle - Pelican Hook Cleats - Chrome on Brass Pelican Hook, Eye End – 6.4mm Straight Vent - Chrome Cleats - Nylon S/S 90 Degree Down Vent - Chrome Bollards - Stainless Steel Stainless Steel Hatch Stay Straight Vent - Nylon Cleats - 316SS (Flat Bar) 200-370mm Stainless Steel Hatch Straight Vent - Nylon - Oval Cleats - 316SS (Round Bar) Stay Straight Vent - Chrome Cleats - Polished Bronze 330-600mm 90 Degree Up Vent - Chrome Rowlocks Plate Chart Table Retainer Spring 90 Degree Vent - Nylon - Round Fairlead 115mm (pair) - 316SS Straight Vent - Nylon - Round Fairlead 150mm (pair) - 316SS 90 Degree Vent - Nylon - Oval Stanchion Base Transom Mount Ski Tow Hook Nylon Fairleads for 10-13mm Rope Nylon Fairleads for 14-18mm Rope Collared U-Bolt Stainless Steel U Bolt Hawse Pipe

212 Fittings - Vents

Streamline Dorade Box Vent Solar Powered Vent

Dorade vent has a Motorised Fan with Large Solar Panel, Rechargeable Battery shut-off system to and Switch allows for 24 Hour Ventilation stop water from rain and waves. OD: 216mm Ø 85 mm sleeve, White flange. Height above deck: 40mm Dimensions: 263 (L) x 150 (W) x 85mm (H) Part Numbers : 13028 - White Finish Part Number : 51637 13027 - (Stainless Steel Finish)

Solar Powered Vent with Stainless Steel Cover Rectangular Stainless Steel Motorised Vent with Fan with Large Solar Panel, Rechargeable Battery and Dorade Box Switch allows for 24 Hour Ventilation Dimensions: 420mm x 120mm OD: 216mm

Part Number : 4381 Height above deck: 31mm

70mm Low Profile PVC Vent Part Numbers : 13025 Part Number : 13593 13025-BP (Blister Packed)

Plastic Ventilator

194mm x 149mm x 127mm

Part Number : 13590 100mm Low Profile PVC Vent

Part Number : 13594

Mushroom Type Vent 100mm High Part Number : 13504 Profile PVC Vent

Part Number : 13596

213 Fittings - Vents

Square Vent 118mm X 118mm Rectangular Vent 206 X 106mm There is also a Pipe Connector available for this vent. Part Number : 4384

Part Numbers : 4382 4382-BP (Blister Packed) Pipe Connector for Square Vent

To suit 70mm and 65mm pipe ABS Louver Vent 260mm x 125mm

Part Number : 4383 Made of UV Stablised ABS Plastic

Part Numbers : 13574-BK (Black) 13574-WH (White) 134574-BK-BP (Black Blister Packed) Divisible Rectangular Ventilator

This vent can be cut into 2 smaller Vents. Black or White coloured , 255mm X 115mm ABS Louver Vent 140mm x 125mm Part Numbers : 4380B (black) or 4380W (white) Made of UV Stablised Black ABS Plastic

Part Numbers : 13575-BK

Louver Vent 127mm X 112mm

Stainless Steel thickness 0.8mm

Louver Vent 267mm X 89mm Part Number : 99063 Stainless Steel

Part Number : 13570

Louver Vent 228mm X 127mm

Stainless Steel

Part Numbers : 13572 13572-BP (Blister Packed)

214 Fittings - Vents

3 Louver Vent - Stainless Steel 4 Louver Vent - Stainless Steel

205mm X 108mm 205mm X 112mm X 25mm X 27mm

Part Number : 13583 Part Number : 13584

6 Louver Vent - Stainless Steel 8 Louver Vent - Stainless Steel

325mm X 112mm Dimensions: 430mm X 75mm X 27mm X 27mm

Part Number : 13586 Part Number : 13580

Round 5” SS Louvre Vent

Marine grade Stainless Steel 10 Louver Vent - Stainless Steel Round 5” Dia 525mm X Part Number : 112mm X 27mm 13505

Part Number : 13582

Midget Ventilators

Stainless Steel Scoop Vent Part Numbers : 4106 - Small: 1-1/2” x 1-5/8” 98mm X 80mm X 30mm 4107 - Large: 2-1/8” x 2-1/8” Part Number : 4112

Clam Shell Vent Clam Shell Vent

Stainless Steel Large 5-1/8” x 4-1/2” x 2-1/8” Stainless Steel Part Number : 4111 7-5/8” x 6-7/8” x 2-3/4”

Part Number : 13528-L

215 Fittings - Fuel Tank Vents

90 Degree Down Vent - Chrome Straight Vent - Chrome

Max Hull Thickness: Max Hull Thickness: 1-1/8” (28mm) 1” (25mm) Chrome Plated Brass Chrome Plated Brass To suit 5/8” I.D. hose To suit 5/8” I.D. hose

Part Number : 2139 Part Numbers : 2136 2136-BP (Blister Packed)

Straight Vent - Nylon 90 Degree Up Vent - Chrome

Max Hull Thickness: Max Hull Thickness: 1/2” (12.5mm 1” (25mm) Chrome Plated Brass Hole req - 30mm To suit 5/8” I.D. hose

Dimensions: Part Number : 2140 75 (L) x 48mm (W)

Connection: Pipe fitting 16mm

Made in Italy

Part Numbers : 2141W - White Straight Vent - Nylon - Round 2141B - Black Round End (41mm dia) Max Hull Thickness: 1-1/2” (38mm) Made in Italy

Part Number : 2144 Straight Vent - Nylon - Oval

Oval End (60 x 40mm) Max Hull Thickness: 1-1/2” (38mm) Made in Italy

Part Number : 2146

90 Degree Vent - Nylon - Oval

Oval End (60 x 40mm) Max Hull Thickness: 1-1/2” (38mm) Made in Italy

Part Number : 2147

216 Fittings - Deck Fillers

MaXtek Deck Filler SS 1.5 inch with MaXtek Deck Filler SS 2 inch with Key Key

Stainless Steel with Key Stainless Steel with Key 1.5” Tube 2” Tube Diesel, Petrol or Water Diesel, Petrol or Water

Part Numbers : Part Numbers : 4001D - Diesel 4003D - Diesel 4001P - Petrol 4003P - Petrol 4001W - Water 4003W - Water

4001D-BP - (Diesel Blister) 4001W-BP - (Water Blister)

Chrome Deck Fillers MaXtek Nylon Deck

Made in New Zealand using Filler chrome on bronze. These can be labelled; Fuel, Gas, Requires a 40mm hose tail Diesel, Petrol, Water or Waste which screws inside the filler (labels supplied). (sold separately). The lid screws on and is sealed The diameter of the top is with an O-Ring. 100mm. Part Numbers : Part Numbers : 40017 (1.5” tube) 3988 - Fuel 40017-BP (1.5” tube Blister Packed) 3989 - Water 40018 (2” tube) 3993 - Cap Only

Deck Filler - Stainless Steel

1.5” tube Water only

Part Number : 4005W - Water

217 Fittings - Bungs

Oval Bung ¾” Chrome MaXtek Automatic Drain Plug

47mm x 32mm External Fits all standard 1” diameter drains on Dimensions transoms up to 2-1/4” thick

Ø24mm Hole with 19mm Automatically drains water when boat Internal Thread is under way and provides a water tight seal when the boat slows or Part Numbers : stops. 3990 - Complete 3992 - Plug Only Size: 170mm x 50mm

Stainless Steel Part Number : 4110 Drain Plug Small Bung - Plastic

50mm x 38mm Mounting hole of 25mm Plug inside diameter 19mm Part Number : 80097 Sold Complete or Plug Only

Part Numbers : 4104 (Complete in White) MaXtek Large Bung with Cut Off 4105 (Complete in Black) 4109 (Plug Only in Black) Base

Large MaXtek Bung - 1 1/4” Large Bung - Plastic threads (32mm X 3.5mm pitch thread) Mounting hole: 41mm Cut off base allows for low mounting on your hull. Nylon Nitrile O ring for a positive seal. Also comes complete with rubber Quick turn coarse thread. O-ring seal and coarse thread bung. Four screw fixing. Blister Packed Ideal also for draining tanks.

Part Number : 4100 Part Number : 4102 Expanding Bung Expanding Bung - Twist Type - Snap (lever) Tightens in place with a Snap plug. clockwise rotation of the Simply snaps in the drain handle. tube for a secure fit. Suits a 23mm hole. Made of brass. Suits a 25mm hole. Part Number : 10261

Part Number : 4103 Expanding Bung - Twist Type Wood Drain Plugs Tightens in place with a clockwise rotation of the “T” Sized from 5 to 45mm handle. set of 10pcs Made of brass. Suits a 25mm hole. Part Number : 90593

Part Number : 40096A

218 Deck Fittings - Bollards, Cleats , Fairleads etc...

6” Bollard - Polished Bronze Bollards - Stainless Steel

6” high 150mm or 200mm long Bolt size: 5/16 inch - 8mm

Part Number : 56502-02 (6”) Part Numbers : 87213-150 - 150mm long 87213-200 - 200mm long Cleats - 316SS (Flat Bar) Premium Retractable Cleat (6”) 316 Stainless Steel *Drainage facility to attach hose pipe in order to divert water that may enter cleat. ¾” (20mm) Hose can be connected to Part Numbers : each mounting fitting for drainage 4 inch: 80041-4 *Anti rattle, holds firm in up or down position. 5 inch: 80041-5 *Cleat sits snugly within frame when fully retracted 6 inch: 80041-6 *Simple and fast two hole installation *Made from polished 316 Stainless Steel Cleats - 316SS (Round Bar) Dimensions: Height above deck: Highly Polished 316 Stainless Steel 42mm above deck line when fully raised Cleats will stay looking good through 14mm above deck line when retracted the harsh marine environment. Depth below deck: 64mm (without drainage Part Numbers : componentry attached) 4”: 80036-4 OA length: 150mm 5”: 80036-5 Width: 38mm 6”: 80036-6

Part Number : 88300 Cleats - Polished Bronze

2.5” (63mm) long Cleat - Retractable Part Number : 56518-01 Polished 316 Stainless Steel Cleat sits snugly within frame when fully retracted Cleats - Nylon Part Numbers : 88232-125 - 125mm long Durable high impact black nylon 88232-150 - 150mm long 88232-200 - 200mm long Part Numbers : 3972N - 60mm 3975N - 145mm 3973N - 80mm 3977N - 180mm 3974N - 110mm 3979N - 220mm Cleats - Chrome on Brass 3974N-BP - 110mm (Blister Packed) 3975N-BP - 150mm (Blister Packed) Made in New Zealand 3977N-BP - 200mm (Blister Packed)

Open Style Cleats Chrome on Brass Rowlocks Plate

Part Numbers & Chrome/Brass Measurements : 3985 - 127mm (L) x 30mm (H) - Ø6mm bolts Sold as a pair 3984 - 155mm (L) x 32mm (H) - Ø8mm bolts 3983 - 205mm (L)x 34mm (H) - Ø9.5mm bolts Part Number : 5824 3982 - 254mm (L) x 44.5mm (H) - Ø12.7mm bolts 219 Deck Fittings - Bollards, Cleats , Fairleads etc...

Fairlead 115mm (pair) - 316SS Rope Clam Cleats

115mm long Sold individually 4-1/2” Bow Choke Sold in pairs Part Numbers : 3968 (Black 4-8mm rope) Part Numbers : 3969 (White 4-8mm rope) 80015 3970 (Black 6-12mm rope) 80015-BP (Blister Packed) 3971 (White 6-12mm rope) 3968-BP (Black Blister Packed 4-8mm rope) 3969-BP (White Blister Packed 4-8mm rope) 3970-BP (Black Blister Packed 6-12mm rope) 3971-BP (White Blister Packed 6-12mm rope) Fairlead 150mm (pair) - 316SS

150mm long Nylon Fairleads for 10-13mm Rope 6” Bow Choke Sold in Pairs Sold individually

Part Number : 80016 Part Numbers : 3922 (10mm rope) 3923 (13mm rope)

Stanchion Base Nylon Fairleads for 14-18mm Rope Marine Grade Stainless Steel Sold in pairs. To suit 1” tube. Part Numbers: Dimensions: 3920 (14mm rope) 3921 90mm x 65mm x 53mm(h) (18mm rope)

Part Number : 54054-02

Stainless Steel Stanchion Collared U-Bolt 600mm long and 1”/25mm tube at base end. Stainless Steel Tubed holes for running life lines in top and 5/16” Diameter. middle. 80mm Max Fitting Depth 2 holes near bottom of pole for screwing or bolting onto mounting base. Made in New Zealand

Part Number : 54001 Part Number : 3986

Transom Mount Ski Tow Hook Stainless Steel U Bolt

Marine Grade Dia: 10mm (3/8”), 115mm long, Stainless Steel 25mm Inside Eye

2½” Ring Diameter Part Number : 53554 2” long thread leg

Part Number : 53590-02 220 Fittings - Hinges Hinge 63mm x 40mm

Nylon Hinge Stainless Steel Pin Hinge 80mm x 60mm

Part Number : 0202 Nylon Hinge Stainless Steel Pin

Part Number : 0203

Hinge 100mm x 40mm

Nylon Hinge Stainless Steel Pin Hinge 100mm x 60mm

Part Number : 0205 Nylon Hinge Stainless Steel Pin

Part Number : 0204 Hinge 135mm x 40mm

Nylon Hinge Stainless Steel Pin

Part Number : 0206 Hinge 70mm x 40mm

Nylon Hinge Stainless Steel Pin

Hinge 95mm x 35mm Part Number : 0207

Nylon Hinge Stainless Steel Pin

Part Numbers : 90379 - Black 90380 -White Hinge 90mm x 40mm

Nylon Hinge Hinge SS - 100mm x 40mm Stainless Steel Pin

Stainless Steel Hinge and Pin Part Number : 0208

Part Number : 52583

Hinge 108mm X 40mm

Nylon Hinge Hinge SS - 62mm x 37mm Stainless Steel Pin

Stainless Steel Hinge and Pin Part Number : 0209

Part Number : 52548

221 Fittings - Catches , Latches , Clips

Barrel Bolt - Plastic Door Clips

Made in Italy For Cupboards. Black or White Coloured 37mm (L:) x 26mm (D) Black or White 86mm(L) x 13mm(H) x 29mm(W) Part Numbers : 0295B (Black) Part Numbers : 0295W (White) 0296B (Black) 0296W (White)

Barrel Bolt - Chrome Brass Door Hook

4 inch long Polished Brass

Part Number : 50002-CP Part Numbers : 50020-01 - (2-1/4” Long) 50020-02 - (2-3/4” Long)

Hatch Fastener 316 Stainless Steel Door Fastener - Chromed Brass

Length can be adjusted via threaded stem: Dimensions: 130 x 35mm 79mm to 95mm 26mm wide Part Number : 50051-CP Security eye for padlock in base.

Part Number : 70611

Anti-Rattle Door Keeper Door Stop & Catcher

316 Stainless Steel Stainless Steel 316

Part Numbers : Designed to be self latching and hold the door in place. 85021 85021-BP (Blister Packed) Part Number : 85019

222 Fittings - Catches , Clips , Locks

Stainless Hatch Cover Pull-Up Marine Padlock “SeaLock”

Stainless Steel Hatch or Floorboard lifter *Chrome plated brass body *Stainless steel shackle and springs for maximum resistance to *Stainless Steel Hatch Pull corrosion from sea water and sun *Measures 32mm in Diameter & 54mm Long *Automatic return of the key to extraction position *Tidy solution for lifting and closing Hatches, Floor Boards, *Key withdrawal with open or closed shackle Marine Padlocks *Storage & Baitwell Lids “SeaLock”

Easy to install - just drill a 6mm hole in your hatch Part Numbers : 11140 - 30mm Suitable for hatch thickness from about 15mm up to about 11141 - 40mm 32mm 11143 - Set of 3, 30mm marine padlocks with joint keys.

Part Number : 51004

Brass Coat Hook

Part Numbers : 91677 - 67mm x 38mm 91678 - 76mm x 51mm

Plastic Tube Clips

Quality Tube Clips 15mm to 45mm

Measurement is the tube diameter.

Part Numbers : 4120 - 15mm 4121 - 20mm 4124 - 35mm 4122 - 25mm 4127 - 40mm Hawse Pipe 4123 - 30mm 4128 - 45mm 4120-BP (15mm Blister Packed) 4123-BP (32mm Blister Packed) Stainless Steel 316 4122 -BP (25mm Blister Packed) 4124-BP (38mm Blister Packed) 165mm x 84mm

Part Number : 80002

223 Fittings - Catches , Latches , Clips

SS Lift Handle Flush Latch SS316 - 2 Finger

Marine Grade Stainless Steel Hatch or door latch. 50mm (Dia.) Complete with strike plate

Part Numbers : Has a recessed lift ring which is easily lifted and releases the 51006 latch 51006-BP (Blister Packed) Polished 316 stainless steel Hole Diameter 50mm (2”)

Part Number : 80284

MaXtek Flush Lifting Handle Lifting Ring 80mm x 19mm

Flush fit lifting handle. Ideal for large access hatches and floor Chrome Plated Zinc. boards. Used for opening hatches. material: chrome plated brass Dimensions: Part Number : 51033 76mm (l) x 52mm(w)

Part Numbers : 51007 51007-BP (Blister Packed)

Flush Ring Pull Latch 2” Flush Latch 316SS

Available in White or Black Hatch or door latch. Ø60mm Complete with strike plate. Recessed lift ring to easily lift and release the latch. Part Numbers : 43001-BK (Black) Polished 316 stainless steel 43001-WH (White) Hole Diameter: 50mm (2”) Overall Diameter: 60mm

Part Numbers : 80264 - (no lock) 80265 - (with lock)

224 Fittings - Catches , Clips , Stays

Heavy Duty Latch Stainless Steel Hatch Stay

Stainless Steel 316 200-370mm

Deck Plate Dimensions: 76 x 62mm This stay is suitable for securing hatches partially or fully open.

Part Number : 80269 Marine grade construction. Sliding frame is all stainless steel with stainless mounting frame. Stainless bar slides within a frame and is clamped tight in any position with plastic knobbed bolt.

A stop prevents arm from coming apart in the event that the hatch is fully opened.

*Adjusts from 200 to 370mm

Part Number : 62500-02

Snap Shackle - Pelican Hook Stainless Steel Hatch Stay

The plunger pin is set captive into the hook during 330-600mm assembly and cannot become detached. This stay is suitable for securing hatches partially or fully open.

Clip Hook - 12mm Marine grade construction. Sliding tube is all stainless steel with 316 Stainless Steel brass plated mounting fittings. Stainless rod slides inside a stainless tube and is clamped tight in Part Number : any position with plastic knobbed bolt. Two fixing holes on each 85006-01 end.

*Adjusts from 330 to 600mm *Inner rod diameter 9.5mm *Outer tube diameter 12.0mm

Part Number : 62507

Pelican Hook, Eye End – 6.4mm S/S

The sliding sleeve offers wide opening, and quick release and tensioning. 6.4mm (1/4”) diameter hole.

Made of Stainless steel Chart Table Retainer Spring Breaking load 450kg Overall length: 170mm When the spring is fully Overall Extended length: 195mm extended it will stay locked in place ensuring your chart table is 6.4mm Hole securely held upright.

Part Number : 85010 Stainless Steel tight wound spring Overall length adjustable 236mm - 276mm

Part Number : 62509

225 Fittings - Ladders

2 Step SS Telescopic Ladder 3 Step SS Telescopic Ladder

316 Stainless Steel 316 Stainless Steel Width incl mounts - 286mm Width incl mounts - 292mm Folded Length - 336mm Folded Length - 370mm Extended Length - 555mm Extended Length - 865mm

Part Number : 13002 Part Number : 13003

Ladder - 2 + 1 Step 4 Step SS Telescopic Ladder

Stainless Steel Marine grade Stainless Steel

OA Width of ladder - 236mm Width incl mounts: 318mm Folded Length - 315mm Retracted Length: 400mm Extended Length - 540mm Extended Length: 1145mm

Part Number : 71064-01 Part Number :71060-04

3 Step SS Under Transom Ladder Teak Boarding Platform & Ladder

Stainless Steel * Natural teak timber platform Designed to be mounted under the transom * 316 marine grade stainless steel Folded Length 300mm parts and ladder Extended - 890mm Step width - 222mm Dimensions: Below transom - 65mm Teak Platform 450mm (w) x 390mm (l) Part Number : 71070-03 Ladder Length - 780 Internal step width - 200mm

Part Number : 11008

226 Fittings - Rails & Steps

Hand Rails - Full Stainless Steel Hand Rails - SS 25mm Oval Tube

22mm Tube Diameter Polished stainless steel. Attractive streamlined look. Made of 25mm oval section tube. Part Numbers : 6mm threaded hole at each end. 3935 (20cm) 3937 (40cm) 3936 (30cm) 3938 (60cm) Part Numbers : HA330 - 305mm HA346 - 460mm

Hand Rail - Teak

3 sizes available , 60mm high

Part Numbers : 93382 - 330mm 93383 - 580mm 93384 - 840mm Hand Rails - SS with Black End

Ideal for mounting on aluminium boats as the s/steel tube does not come into contact with the mounting surface. Fasten with eight 6mm (1/4”) countersunk screws. 22mm Tube Diameter. Can be easily shortened if desired. Hand Rail - Plastic

Part Numbers : 570mm two looped hand rail HA241 - 410mm Manufactured from tough UV resistant polypropylene HA261 - 610mm construction. HA281 - 810mm Part Number : 3939

Step for Mast Chromed Brass Grab Handle Stainless Steel Dimensions(OA): 140mm (L) x 16mm teak instep 42mm (W) x 40mm (H) 286mm x 130mm

Part Numbers : Part Number : 54035 143752 143752-BP (Blister Packed)

Rail Mount Bracket Stainless Steel Rail & Teak Footrest Plastic with Stainless Steel Screws & Inner Ring for 1” & Dimensions: 7/8” Tube 270 x 130mm Part Number : 60162 Part Number : 3940

227 Fittings -Steps & Rigging Fittings

Mast Step - Folding Step

A strong chrome plated folding step with diamond serrated tread. Stainless steel tension spring for positive location. When the step is not in use it is easily folded vertically so it is clear and out of the way.

Ideal step to improving boarding a boat from different heights or climbing mast.

* Step folds easily out of the way * Robust mechanical hinge * Chromed Plated Brass construction * Corrosion resistant materials * 50 x 82mm Step Size

Part Number : 54049 Stainless Marine Rigging Screws

Fork-Swage connectors Adjustment is achieved by rotating the main coupling. 6mm centre hole is provided for inserting adjustment tool for 12mm rigging screw and 4mm for the 10mm and 8mm rigging screws. The clean lines and design in the Rigging Screw makes it less prone to tearing sails or clothing and ideally suited for marine or architectural features. 316 marine grade stainless steel

Stainless Marine Rigging Screw - 12mm Dimensions: Overall length when closed {Pin to Pin - 260mm Overall length when fully open {Pin to pin - 400mm Thread diameter - 12mm Pin diameter - 12mm Jaw width ID - 16mm Jaw width oa - 23mm

Part Number : 80080-05

Stainless Marine Rigging Screw - 10mm Dimensions: Overall length when closed (Pin to Pin) - 200mm Overall length when fully open (Pin to pin) - 280mm Thread diameter - 10mm Pin diameter - 10mm Jaw width ID - 13mm Jaw width OA - 20mm

Part Number : 80080-04

Stainless Marine Rigging Screw - 8mm Dimensions: Overall length when closed (Pin to Pin) - 175mm Overall length when fully open (Pin to pin) - 255mm Thread diameter - 8mm Pin diameter - 8mm Jaw width ID - 10mm Jaw width OA - 15mm

Part Number : 80080-03

228 229

Galley

232. Novakool 236. CAN Gas 240. EVO Gas Fridges & Ovens & Hobs Ovens & Hobs

Freezers CAN CU1302 Equator - Gas 3 ENO Perigord – Build-In Gas Oven 246. Galley Burner + Oven ENO Open Sea Gas Burner + Oven NOVAKOOLER BCD-60 - Portable CAN CU1300 Tropic - Gas 2 Burner + Grill Accessories

Fridge + Oven ENO Gascogne Gas Burner + Oven Marine grade Aluminium Alloy Gas NOVAKOOLER BCD-45 - Portable Kalahari - Built-In Oven with Grill + Grill Tanks. Fridge ENO Bretagne – 3 Burner, SS Oven NOVAKOOLER BCD-30 - Portable 6 Piece Mug Set “Exclusive” with Grill Fridge 17 Piece Dinnerware Set ENO Le Chef – 4 Burner, SS Oven RFS7501 212 Litre Fridge/Freezer 237. CAN Hobs & “Exclusive” R4500 122 Litre Fridge/Freezer with Grill 24 Piece Cutlery Set “Exclusive” R2600 68 Litre Fridge/Freezer Sinks Plastic Bag Holder R1600 36 Litre Fridge/Freezer Compact Dish Drainer RFU9000 258 Litre Fridge/Freezer CAN 3 Hob complete with Sink, STACK-A-PLATE RFU8000 193 Litre Fridge/Freezer “Crystal” Finish 242. ENO Hobs Boaties Fry Pan R3800 100 Litre Fridge/Freezer CAN 2 Hob complete with Sink, Boaties Baking Pan ENO Atoll - 1 Burner R2300 59 Litre Fridge/Freezer “Crystal” Finish Smartspace Frypan ENO Duo - 2 Burner F2300 59 Litre Freezer Rectangular Single Burner Hob Smartspace 3 Pot Set ENO Build-in 2 Burner R1900 54 Litre Fridge/Freezer with Sink Stainless Steel Deluxe Whistling ENO Build-in 3 Burner TL2500 70 Litre Freezer Single Burner Hob with Sink Kettle Door Latch for NovaKool Fridge/ Stainless Steel Kettle Freezers 243.Ovens & Hobs ZipVac Marine and RV Kit Door Security Latch for NovaKool ZipVac Camping Kit 238. CAN Hobs & ZipVac King Fillet Bags Fridge/Freezer Seaward Princess Electric 2 burner ZipVac Fillet Bags Hinges for NovaKool Fridge/ Burners + Oven & Grill Slip Stop - Non Slip Material Freezer Seaward Princess Euro Gas 3 Hingepin for NovaKool Fridge/ Flush Fitting Twin Burner Gas Hob Burner + Oven Freezer Flush Fitting Single Burner Gas Hob Nelson Gas 2 Burner + Oven & Grill NovaKool 100 - 240VAC Power Stainless Steel Twin Burner Spinflo MK3 Caprice Gas 4 Burner Supply Module Stainless Steel Single Burner + Oven & Grill CAN Flush Mounted Single Burner Spinflo TRIPLEX Rapid Gas 3 Hob Burner + Oven & Grill 235. Novakool Parker Marine Stainless 2 Burner Refrigeration Kits Oven 239. Hobs & Taps Danfoss BD35F Compressor FL Plate Kit Mixer Tap - Artemis 245. Sinks & Novakool F Plate Kits Mixer Tap - Aegle Pumps * Flex Line (optional on plate kits) Can Twin Mixer Can Single Tap RT4 Freezer Compartment Sink with Folding Tap & Glass lid RT6 Freezer Box Mixer Tap with adjust. spray and shower tube Oval Sink with Folding Tap & Glass R26 Plate lid Deep Round Sink Round Marine Sink (Bowl Style) TMC Electric Galley Pump & Faucet TMC In-Line Pump - 280GPH TMC Diaphram Foot Pump - 15LPM TMC Hand Galley Pump & Spout TMC Galley Pump - 100GPH

231 Galley - Novakool Portable Fridges & Freezers

NOVAKOOLER BCD-60 - Portable Fridge

Portable 60 Litre Compressor Fridge or freezer Plugs into your car, truck or boat.

Capacity: 63 Quarts / 60 Litres Voltage: 12-24 VDC, Optional 240V Adaptor available for purchase. Power Consumption: 4.6 amp @ 12V, 2.7 @ 24V Weight: 25 KG Dimensions: 660 x 400 x 520 mm

Strong corrosion resistant cabinet. Electronic temperature control and readout . * 50 x 82mm Step Size

Part Number : NCBCD60 NOVAKOOLER BCD-45 - Portable Fridge

Portable 45 Litre Compressor Fridge or freezer Plugs into your car, truck or boat.

Capacity: 47 Quarts / 45 Litres Voltage: 12-24 VDC, Optional 240V adaptor available for purchase. Current: 4.6 amp - 12V, 2.7 - 24 amp (when operating) Weight: 21 KG Dimensions: 660 x 400 x 432 mm

Strong corrosion resistant cabinet. Electronic temperature control and readout. Top loading for maximum efficiency.

Part Number : NCBCD45

NOVAKOOLER BCD-30 - Portable Fridge

Portable 30 Litre Compressor Fridge or freezer Plugs into your car, truck or boat.

Capacity: 31.5 Quarts / 29.8 Litres Voltage: 12-24 VDC, Optional 240V Adaptor available for purchase Current: 4.6 amp - 12V, 2.7 - 24 amp (when operating) Weight: 18 KG Dimensions: 560 x 400 x 393 mm

Strong corrosion resistant cabinet. Electronic temperature control and readout. Top loading for maximum efficiency.

Part Number : NCBCD30

232 Galley - Novakool Fridges & Freezers

RFS7501 212 Litre Fridge/Freezer RFU9000 258 Litre Fridge/Freezer

7.5 cu.ft (212 litres) total 258 Litres total interior volume interior volume 71 litres freezer volume 2 cu.ft (57 litres) freezer volume Cutout Dimensions: 1343 (h) x 591mm (w) x 578mm (d) Cut Out Dimensions: 864 (h) x 711 (w) x 559mm (d) Part Number : NCRFU9000

Part Number : NCRFS7501

RFU8000 193 Litre Fridge/Freezer R4500 122 Litre Fridge/Freezer

193 litres total interior volume 4.3 cu.ft (122 litres) volume

71 litres freezer volume Cut Out Dimensions: 721mm (H) X 514mm (W) Cutout Dimensions: x 533mm (D) 1318 (h) x 591 (w) x 597mm (d) Optional chine hugger Part Number : NCRFU8000 Part Number : NCR4500

R3800 100 Litre Fridge/Freezer R2600 68 Litre

3.5 cu.ft (100 litres) volume Fridge/Freezer

Cut Out Dimensions: 2.4 cu.ft (68 litres) volume 721mm (H) X 514mm (W) x 457mm (D) Cut Out Dimensions: 514mm (H) X 457mm (W) Optional chine hugger x 495mm (D)

Part Number : NCR3800 Part Number : NCR2600

R2300 59 Litre F2300 59 Litre Fridge/Freezer Freezer

2.1 cu.ft (59 litres) volume 2.1 cu.ft (59 litres) Freezer volume

Cut Out Dimensions: Cut Out Dimensions: 721mm (H) X 425mm (W) x 356mm 721mm (H) X 425mm (W) x 356mm (D) (D)

Part Number : NCR2300 Part Number : NCRF2300

233 Galley - Novakool Fridges & Freezers

R1900 54 Litre Fridge/Freezer R1600 36 Litre Fridge/Freezer

54 Litres Total Volume = 36 Litres Total Volume = 48 litres of fridge space + 30 litres of fridge space + 6 litre freezer box 6 litre freezer box

Cut Out Dimensions: Cut Out Dimensions: 525 (h) X 397 (w) x 450(d) 525 mm (H) X 397 mm (W) x 343 mm (D) Part Number : NCR1900 Part Number : NCR1600

TL2500 70 Litre Freezer Door Latch for NovaKool Fridge/

2.5 cu.ft (70 litres) volume Freezers

Cut Out Dimensions: Comes with mounting screws. 514(l) X 457 (w) x 476-686mm (h) Part Number : NCLATCH75 Base can be removed to lower height. Compressor can be unbolted and relocated to suit installation Door Security Latch for NovaKool Part Number : NCTL2500 Fridge/Freezer

Part Number : NCLATCHS

Hinges for NovaKool Hingepin for NovaKool Fridge/ Fridge/Freezer Freezer Part Numbers : NCHINGE - Used as Right Top mount or Left Pin only for securing hinge to the fridge Bottom mount for door hinge. door.

NCHINGEL - Used as Left Top mount or Right Part Number : NCHINGEP Bottom mount for door hinge.

NovaKool 100 - 240VAC Power Supply Module

100 - 240VAC Power Supply Module for NovaKool Fridges and Freezers.

This module is used when you want to run your NovaKool Fridge or Freezer on US standard 110VAC Boat power or on NZ Standard 240VAC power.

This replaces the 12-24VDC module that comes standard with the NovaKool Fridges and Freezers.

Part Number : NCF0FK

234 Galley - Novakool Refrigeration Kits

Danfoss BD35F Compressor RT4 Freezer Compartment

The Danfoss BD35F - Used for a refrigerator that variable speed compressor requires a small freezer is the heart of a NovaKool compartment. conversion kit. 267 (l) x 317 (h) x 165mm (w) High capacity fan cooled, designed for hot and tropical Part Number : NCRT4 applications. No need for additional water pumps and relays. RT6 Freezer Box

Standard pre-charged line kit 12 ft (3.66M). Internal volume .54 cuft (15.3lts) Reusable couplings between cooling unit and plates. Mount vertical or horizontal. 356 (l) x 172 (h) x 279mm (d) Part Number : NCDANFOSS Part Number : NCRT6

FL Plate Kit

FL Plate is designed to be bent to fit your application.

Used in larger refrigerators or freezers.

914mm x 381mm

Part Number : NCFL Novakool F Plate Kits

Used for all refrigerator or all freezer or a spill over combination of refrigerator and freezer.

406mm x 254mm Plates can be separated up to 457mm

Part Numbers : NCF1 - Single Plate Kit NCF2 - 2 Plate kit NCF2FLEX - 2 Plates with Flex Line

* Flex Line (optional on plate kits)

* Flex line is designed to stay flexible during installation, even if you don’t get it right the first try

* Flex Line can be coiled and uncoiled over 200 times (standard copper lines harden after 3 bends in same spot)

* Flex line is designed for mobile applications including; Marine, RV and Trucking.

* Flex line has been used in mobile commercial refrigeration for over 10 years

* Flex line uses reusable quick couplings

* Flex line is available on all Nova Kool evaporators and can be uncoiled from 2 ft (.8m) to 12ft (4.7m). 235 Galley - CAN Gas Ovens & Hobs

CAN CU1302 Equator - Gas 3 Burner + Oven

Stainless steel mirror finish inside and out. Oven door features double thermal glass, silk-screen printed and thermometer.

Standard equipment: s/s gimbals, s/s pan-holders for each hob-unit burners, s/s oven grid and s/s baking tray. Burners rating: Each burner is fitted with thermocouple (safety valve). Auxiliary: 1000 W - 73 g/h Semi-rapid: 1750 W - 127 g/h Rapid: 3000 W - 218 g/h

Measurements: 480mm (W) x 510 (H) x 420 (D)

Part Number : CU1302

CAN CU1300 Tropic - Gas 2 Burner + Oven

Stainless steel mirror finish inside and out. Oven door features double thermal glass, silk-screen printed and thermometer.

Standard equipment: s/s gimbals, s/s pan-holders for each hob-unit burners, s/s oven grid and s/s baking tray. Burners rating: Each burner is fitted with thermocouple (safety valve). 2 x Semi-rapid: 1750 W - 127 g/h

Measurements: 400mm (W) x 510 (H) x 420 (D)

Part Number : CU1300

Kalahari - Built-In Oven with Grill

In-built stainless steel gas oven with mirror stainless steel finish is ideal for under bench installations in motorhomes and caravans. Construction is manufactured completely with stainless steel. Both external and internal is finished in mirror polished stainless.

Door oven manufactured with double glazed thermal glass with an in-built thermometer.

Supplied with: Stainless oven rack Stainless baking tray

Oven Specifications Capacity: 30 litre Semi-rapid: 1750 W with saftey thermocouple cut-out Grill : 2500 W” Weight: 28Kg

Dimensions:375 (w) x 380 + 40 * (d) x 460 (h) * Allows for gas pipe fittings

Measurements: 500mm (w) x 420 (h) x 410 (d)

Part Number : CU1305

236 Galley - CAN Hobs & Sinks CAN “Randi” Hob complete with Sink

New Model from CAN of Italy Rectangular Gas Cooker and in-built Sink

All stainless finish with gas burner, round sink. Finished with tempured smoke glass lid with anti-vibration washers and disappearing hinges. 4mm tempured glass cover can be used as a work surface or support plane.

Excludes tap.

Dimensions 530 (w) x 325 (d) x 250 + 120 (h) mm

Part Number : FL1323

CAN 2 Hob complete with Sink, “Crystal” Finish

Flush mounting gas hob units made with tempered anti-scratch crystal glass complete with s/s sink.

Gas hob-unit 2 burners complete with sink Sink dimensions: 300 mm(dia) x 180mm(h) (item LA1417). Overall Dimensions: 600mm x 420mm

BURNERS: all burner equipped with thermocouple (safety valve). 2 x SEMI-RAPID: 1750 W-127 g/h

Part Number : PV1360

Rectangular Single Burner Hob with Sink

S/S flap hob unit c/w pan-holder, s/s sink and folding faucet. The hob is complete with temperate glass lid.

Height: 180mm x Depth: 320mm x Length: 350mm Hob-unit Burners: 1 semi-rapid capacity 1750 W

Part Number : LC1710

Single Burner Hob with Sink

S/S flap hob unit c/w pan-holder, s/s sink and folding faucet. The hob is complete with temperate glass lid.

All burners fitted with thermocouple (safety valve). SEMI-RAPID: capacity 1750 W

HEIGHT: 180mm DIAM: 300mm HOB-UNIT BURNERS: 1 semi-rapid capacity 1750 W

Part Number : LC1701

237 Galley - CAN Hobs & Burners

Flush Fitting Twin Burner Gas Hob

Rectangular gas hob-unit 2 burners complete with tempered smoked glass lid, with burners with self-blocking flame lid, s/s built-in support grid fixed with anti-vibration rubber-washers and disappearing hinge. On top of the unit there is placed a special sleeve that has to be used as seat for the column type pan-holder.

BURNERS: all burner equipped with thermocouple (safety valve). 1 x AUXILIARY: 1000 W-73g/h 1 x SEMI-RAPID: 1750 W-127 g/h

Width: 530mm x Depth: 325mm x External Height: 145mm

Part Number : FC1336

Flush Fitting Single Burner Gas Hob

Round gas hob-unit 1 burner complete with tempered smoked glass lid, with burners with self-blocking cap, s/s built-in support grid fixed with anti-vibration rubber-washers and disappearing hinge. On top of the unit there is placed a special sleeve that has to be used as seat for the column type pan-holder.

BURNERS: all burner equipped with thermocouple (safety valve). 1 x SEMI-RAPID: 1750 W-127 g/h

Diameter: 340mm x External Height: 70mm

Part Number : FC1345

Stainless Steel Twin Burner

Manufactured in mirror finished stainless steel complete with fixing plates, interchangeable with CAN gimbals system.

BURNERS RATING: All burner fitted with thermocouple (safety valve). AUXILIARY: 1000 W - 73 g/h SEMI-RAPID: 1750 W - 127 g/h

Width: 440mm x Height: 90mm x Depth: 290mm

Part Number : FN1332

Stainless Steel Single Burner

Manufactured in mirror finished stainless steel complete with fixing plates, interchangeable with CAN gimbals system.

BURNERS RATING: All burner fitted with thermocouple (safety valve). SEMI-RAPID: 1750 W - 127 g/h

Width: 210mm x Height: 90mm x Depth: 290mm

Part Number : FN1330

238 Galley - CAN Hobs & Taps

CAN Flush Mounted Single Burner Hob

CAN Flush Mounted Single Burner Hob with Pot Holder

Manufactured in mirror finished stainless steel. Perfect for small applications such as camper vans and small boats. (That have suitable ventilation)

BURNER RATING: The burner is fitted with a thermocouple (safety valve). SEMI-RAPID: 1750 W - 127 g/h

Part Number : PC1320

Can Twin Mixer

Mixer Tap - Artemis * Chrome plated with swivelling faucet * Chrome Plated * Double handed with Dimensions: ceramic valves. 155mm (L) x 125mm (H) Part Number : RB1485 Part Number : 99962

Can Single Tap

* Chrome plated * Ceramic valves

* Swivelling faucet.

Mixer Tap - Aegle Part Number : RB1486

*Chrome Plated

Dimensions: 190 (L) x 120mm (H)

Part Number : 99999 Mixer Tap with adjust. spray and shower tube

* Chrome Plated

* Adjustable spray & shower tube 150cm

Dimensions: 240mm (L) x 185mm (H)

Part Number : 99960

239 Galley - ENO Ovens & Hobs

ENO Perigord – Build-In Gas Oven

Strong and ergonomic, the ENO build-in oven, with its stainless steel fascia plate and high resistant enamelled inner oven, allows for easy cooking. It is fitted with a timer and door locking system.

Made in France and installed on many European built production boats (Beneteau, Jeanneau, Hanse etc.). For yachts and offshore power vessels these ranges come complete with gimbal mountings. For a fixed installation these ranges also have built in mounting feet so they can be rested on any flat surface.

Stylish, Quality Stoves. Made in France

Dimensions: 550 (h) x 490 (w) x 540mm (d)

Part Number : Perigord ENO Open Sea Gas Burner + Oven + Grill

These gas galley ranges are both stylish and functional. Constructed of highly polished marine grade stainless steel that lasts well in the marine environment and is easy to clean.

Made in France and installed on many European built production boats (Beneteau, Jeanneau, Hanse etc.). For yachts and offshore power vessels these ranges come complete with gimbal mountings. For a fixed installation these ranges also have built in mounting feet so they can be rested on any flat surface.

Features: *8000 BTU Rapid burner and 5600 BTU medium burner *Enamelled oven offers good heat retention *Polished Stainless Steel exterior *Flame Failure Cut Off’s on all burners for safety *Electronic spark ignition powered by an AA battery *Stainless splash back *Removable trivet grid for easy cleaning *Pan holders included

Part Numbers : 141341 - ENO Open Sea – 2 Burner, SS Oven with Grill (470 (h) x 504 (w) x 410mm (d) 143341 - ENO Open Sea – 3 Burner, SS Oven with Grill (466 (h) x 504 (w) x 410mm (d) ENO Gascogne Gas Burner + Oven + Grill

These gas galley ranges are both stylish and functional. Constructed of highly polished marine grade stainless steel that lasts well in the marine environment and is easy to clean.

Made in France and installed on many European built production boats (Beneteau, Jeanneau, Hanse etc.). For yachts and offshore power vessels these ranges come complete with gimbal mountings. For a fixed installation these ranges also have built in mounting feet so they can be rested on any flat surface.

Features: *Enamelled oven offers good heat retention *Polished Stainless Steel exterior *Flame Failure Cut Off’s on all burners for safety *Electronic spark ignition powered by an AA battery *Removable trivet grid for easy cleaning *Pan holders included

Part Numbers : 181341 - ENO Gascogne – 2 Burner, SS Oven with Grill (466 (h) x 504 (w) x 410mm (d) 183341 - ENO Gascogne – 3 Burner, SS Oven with Grill (466 (h) x 504 (w) x 410mm (d) 240 Galley - ENO Ovens & Hobs

ENO Bretagne – 3 Burner, SS Oven with Grill

This cooker opens the doors to the exclusive world of top range cookers for boating. Thanks to its large cook-top, cooking is like being at home. Whether for the choice of material, shine of the stainless steel, ergonomics of the controls, precision of the thermostat or performance of the grill. The elegance and efficiency of this cooker will meet the expectations you have for your boat.

Made in France and installed on many European built production boats (Beneteau, Jeanneau, Hanse etc.). For yachts and offshore power vessels these ranges come complete with gimbal mountings. For a fixed installation these ranges also have built in mounting feet so they can be rested on any flat surface.

Features: *3 Burners *Enamelled oven offers good heat retention *Polished Stainless Steel exterior *Flame Failure Cut Off’s on all burners for safety *Electronic spark ignition powered by an AA battery *Removable trivet grid for easy cleaning *Pan holders included

Dimensions: 470 (h) x 500 (w) x 527mm (d)

Part Number : Bretagne

ENO Le Chef – 4 Burner, SS Oven with Grill

This cooker opens the doors to the exclusive world of top range cookers for boating. Thanks to its large cook-top, cooking is like being at home. Whether for the choice of material, shine of the stainless steel, ergonomics of the controls, precision of the thermostat or performance of the grill. The elegance and efficiency of this cooker will meet the expectations you have for your boat.

This is the ideal cooker for big boats. It boasts the biggest capacity oven on the market (42L) and offers all the sophistication and performance of the Bretange model.

Made in France and installed on many European built production boats (Beneteau, Jeanneau, Hanse etc.). For yachts and offshore power vessels these ranges come complete with gimbal mountings. For a fixed installation these ranges also have built in mounting feet so they can be rested on any flat surface.

Features: *4 Burners *Enamelled oven offers good heat retention *Polished Stainless Steel exterior *Flame Failure Cut Off’s on all burners for safety *Electronic spark ignition powered by an AA battery *Removable trivet grid for easy cleaning *Pan holders included

Dimensions: 576 (h) x 500 (w) x 527mm (d)

Part Number : 074341

241 Galley - ENO Hobs

ENO Atoll - 1 Burner

Small and compact, this stove easily fits abroad whilst offering maximum safety and reliability.

Stylish, Quality Stoves. Made in France

BURNERS RATING: Burner fitted with thermocouple (safety valve). AUXILIARY: 2kW

Dimensions: 110 (h) x 290 (l) x 350mm (d)

Part Number : 061281

ENO Duo - 2 Burner

A high-performance and light stove, with two burners and made entirely of stainless steel. It comes complete with a gimbal it and a set of pan holders.

Stylish, Quality Stoves. Made in France

BURNERS RATING: Burners fitted with thermocouple (safety valve). AUXILIARY: 2.5kW SEMI-RAPID: 1.75kW

Dimensions: 250 (h) x 500 (l) x 392mm (d)

Part Number : 062381 ENO Build-in Hobs

This built-in cooking unit with two options is made out of stainless steel and provides substantial cooking capacity for a compact design. It is particularly suited for motor-boats and catamarans.

Stylish, Quality Stoves. Made in France

ENO Build-in 2 Burner BURNERS RATING: Burners fitted with thermocouple (safety valve). AUXILIARY: 2.5kW SEMI-RAPID: 1.75kW

Dimensions: 80 (h) x 465 (l) x 335mm (d)

Part Number : 432041

ENO Build-in 3 Burner BURNERS RATING: Burners fitted with thermocouple (safety valve). AUXILIARY: 2.5kW SEMI-RAPID: 1.75kW SPARE: 1kW

Dimensions: 80 (h) x 465 (l) x 385mm (d)

Part Number : 433341

242 Galley - Ovens & Hobs

Seaward Princess Electric 2 burner + Oven & Grill

Features: *2 high speed (1100 watt) burners *Door with window and full width oven handle *Adjustable oven rack *Thermostatically controlled oven *Full-size oven and broiler with porcelain enamel finish *Standard sea rail *1250 watt bake element *1300 watt broiler element *Interior oven light with on/off switch *Lift cover included *UL 858 or CE certified * Made in USA

NOTE: Picture shows black glass door. But this listed model has a stainless steel door.

Part Number : 2342-1311 Seaward Princess Euro Gas 3 Burner + Oven

Features: *Thermocouple protected burners with Piezo ignition *Sealed burners make cleaning easy *Door with window and full-width oven handle *Adjustable oven rack *Thermostatically controlled oven *Full-size oven and broiler with porcelain enamel finish *One piece stove top grate *7,000 BTU’s per top burner *10,000 BTU oven burner *ANSI cetified *Made in USA

Overall Dimensions: Width 21-3/4” x Depth 19-7/16” x Height 22-1/16”

NOTE: Picture shows black glass door. But this listed model has a stainless steel door.

Part Number : 3374-1001 Nelson Gas 2 Burner + Oven & Grill

Manufactured in the UK. This Techma oven is extremely popular and is installed in many boats and caravans throughout NZ. Solidly constructed and primarily of stainless steel including the inside of the oven.

Glass door and flame failure feature on all burners. Comes complete with baking tray, enamelled grill pan and adjustable oven shelf. Optional Sea Rails, Pot holder set and gimbal set sold separately.

1 x 1.5Kw thermostatically controlled oven burner 2 x 1.5kw hotplate burners 1 x 1.5Kw grill

Dimensions: 525 (h) x 450 (w) x 420 (d) mm

Part Number : 5002 243 Galley - Ovens & Hobs

Spinflo MK3 Caprice Gas 4 Burner + Oven & Grill

Features: *Seamless Oven and Grill *Multi-Level Oven and Grill Shelf Points *3 Large Burners and 1 Smaller Burner *Flame Failure to all Burners *12 volt Electronic Ignition *Non-reflective oven door allows viewing while Cooking *Thermostatically controlled oven burner *Flush mounting glass lid *Rapid Oven heat up times *Chrome Knobs with T bar Styled Handles

Energy Safety Compliance # SER8187A

Dimensions: 513 (w) x 644 (h) x 500 (d) mm

Part Number : 5010

Spinflo TRIPLEX Rapid Gas 3 Burner + Oven & Grill

Features: *3 Burners with Grill and Oven *Seamless Oven and Grill *Multi Level Oven and Grill Shelf Points *Flame Failure to all Burners *12 volt Electronic Ignition *Non-reflective oven door allows viewing while cooking *Thermostatically controlled oven burner *Flush mounting glass lid *Rapid Oven heat up times *Satin Knobs

Energy Safety Compliance # SER8188A

Dimensions: 456 (w) x 463 (h) x 500 (d) mm

Part Number : 5012 Parker Marine Stainless 2 Burner Oven

Features: *Flame failure device and temperature gauge. Small footprint *19 litre capacity oven *2 burner gas hob (Hobs: 2 x 3.5 kW Burners) *Stainless steel construction *Glass see through oven door *Flame fail safety *Includes pot racks and gimbals

Dimensions: 450 (w) x 315 (d) x 485mm (h)

Part Number : FO600SN

244 Galley - Sinks & Pumps

Sink with Folding Tap & Glass lid Oval Sink with Folding Tap & Glass lid

Stainless Steel sink with Oval Stainless Steel Sink with temperated glass cover. folding tap and Tempered Folding single tap. Glass lid.

Dimensions: 510mm (W) x Dimensions: 180mm (H) x 390mm (D) x 155mm (H) 320mm (D) x 350mm (L) Part Number : LR1450 Part Number : LR1760

Deep Round Sink Round Marine Sink (Bowl Style)

* Heavy duty polished * Heavy duty polished stainless steel stainless steel

* Solid lip for flush mounting * Solid lip for flush mounting

Drain Hole Dia: Ø62mm Drain Hole Dia: Ø52mm Bowl Depth: 180mm Bowl Depth: 127mm Bowl Diameter: IDØ260mm - Bowl Diameter: IDØ260mm - ODØ292mm ODØ292mm Part Number : 40030 Part Number : 40032-02 TMC Electric Galley Pump & Faucet TMC Hand Galley Pump & Spout

* Zinc-alloy base and Chrome-Plated die cast top with plastic body Stainless steel swing spout. * Built-in switch. Use 3/8” I.D. hose * Fresh or Salt water use. Capacity: 60 GPH Self-Priming Draws: 1.5A at 12V DC. Pumps: 100 GPH (378LPH) Part Number : 71602 Delivery Head: up to 2m

15/32” (12mm) hose connection. * Non-self priming centrifugal pump must be mounted below water level or tank.

Part Number : 06301

TMC In-Line Pump - 280GPH TMC Galley Pump - 100GPH

Sonic-welded and submersible unit. Quiet electric pump Light weight to suspend in pipework. Compact and easy to install. 1/2” (12.7mm) hose connection. Use with 15/32” (12mm) hose. Draws: 3A at 12V DC. Includes clamp Pumps: 280 GPH (1060LPH) Delivery Head: 7m (requires priming) Max 60°C Draws: 1.5A at 12V DC. Delivery Head: upto 2m Pumps: * Non-self priming centrifugal pump, designed for 100 GPH (378LPH) intermittent operation. * Non-self priming centrifugal pump must be mounted below water Meets CE Compliance. level or tank. Use with fresh and salt water.

Part Number : 0430107 Part Number : 06302 245 Galley - Pumps & Alloy Gas Bottles

TMC Diaphram Foot Pump - 15LPM

Smooth durable action with strong frame.

Hose connections are fully adjustable so that you can orientate the pipe work to suit your installation.

* Multi-directional inlet and outlet connections * Dual action pump * Self priming * CE Certified * ISO-9001 & ISO-14001 certification

Capacity: 240GPH (908LPH) Hose: use 1/2” (12.7mm) ID hose.

Dimensions: 236.8(L) x 152.6(W) x 123.5(H)

Part Number : 70701

Marine grade Aluminium Alloy Gas Tanks.

Fully weather resistant and impervious to salt. Ideal for gas cylinders on a boat or outside your home.

Corrosion resistant construction and material to ensure maximum life in the marine environment. Patented one piece, one seam weld construction.

Our cylinders are made from special refined Al-Mg-Si alloy, and have many advantages over steel cylinders.

* At the same volume, the mass of our cylinders are half that of steel * Long working life * Non rust boat gas cylinder * Can be used without any anti-corrosion coating * Because of cleanliness and resistance of the alloy it can be used for cooling gases * The weld is on the most favourable part of the pressurised cylinder so it is loaded less * There is no spark-danger. * Can be recycled

Approvals: New Zealand & Australian Approved. EN12-862/2000 Inspection Authority: TUV. Germany.

Part Numbers : LPG2.2 (2.2 kg Capacity) LPG10 (10 kg Capacity) LPG20 (20 kg Capacity) LPG5 (5 kg Capacity) LPG15 (15 kg Capacity) LPG23 (23 kg Capacity)

246 Galley - Galley Accessories 17 Piece Dinnerware Set 6 Piece Mug Set “Exclusive” “Exclusive”

6 piece mug set. Made of 100% Melamine. Made of 100% Melamine. Dishwasher and microwave safe. Dishwasher and microwave safe. Includes: Part Number : 57218 *Dinner Plate, Ø 26cm, 4 pieces *Dessert Plate Ø 20cm, 4 pieces *Cereal Bowl Ø 15cm, 4 pieces *Mug, 4 pieces *Salad Bowl Ø 24cm, 1 piece

6 Piece Wine Glass Set “Exclusive” Part Number : 57350 6 piece wine glass set. Made of 100% Melamine. Dishwasher and microwave safe.

Part Number : 57254 24 Piece Cutlery Set “Exclusive”

Made from stainless steel and ABS plastic. Water / beverage glass Set “Exclusive” 6 x Forks, Knives, Spoons and 6 piece Water / beverage glass set. Teaspoons. Made of 100% Melamine. Dishwasher and microwave safe. Dishwasher safe.

Part Number : 57255 Part Number : 57208

Plastic Bag Holder Compact Dish Drainer

Reuse your grocery bags. Store grocery bags, trash bags and dryer Compact and lightweight dish drainer for boats and motorhomes sheets efficiently. Part Number : DISHDRAINER Plastic bag holder/dispenser mounts easily on walls or inside cabinets with screws or double-sided tape. Holds up to 25 grocery bags. Patented.

Part Number : 5000 STACK-A-PLATE

Use in your cabinet to keep plates organised, and to stop them from sliding and rattling. Plates stay in place while traveling and are more protected from breakage.

Set of two, one fits plates up to 185mm, the other fits plates up to 260mm.

Bright White Dishwasher safe Plate stacker saves room Saves damage Stops annoying chinking

Part Number : STACKAPLATE

247 Galley - Galley Accessories

Boaties Fry Pan

** New improved Model**

New Features * Stainless Steel Base allows use on induction hobs * Silicone Handle for a more comfortable grip

Frustrated trying to fit a round frypan on to a square stove?

The answer - Boaties Frypan

* Pan Measurements 250 x 200mm the same approximate cooking surface as a 255mm round fry pan

* Heavy gauge aluminium with stainless steel base gives an even and stable heat transfer * High Quality non-stick surface ensures a longer pan life * Compact Ovenproof Handle easy to grip and high enough to clear a fiddle rail

Part Numbers : FC10 (Fry Pan) FC11 (Lid) Boaties Baking Pan

Now with one pan you can roast, braise and bake for the whole crew!

* Designed for one-handed use making removal from the oven easier * Compact Detachable Handle is always cold when used and stows away neatly with the pan * Oven and Stove Top use * Size 31 x 21 x 6cm - over 2 litres volume * Heavy Gauge Aluminium gives an even and stable heat transfer * Double Coated Non-stick surface ensures a long pan life

Part Number : FC12 Smartspace Frypan

SmartSpace Frying Pan is a new concept in cookware that fits on even the most compact stoves. Perfect for the RV, boat or baches were space is essential. The non-stick finish makes washing up effortless.

Cookware Features: Stainless steel base suitable for gas, electric or induction cooking Durable 3mm aluminium walls Teflon coated non-stick interior (high grade) Enamel baked exterior Removable handle does not transfer heat Dishwasher safe Silicone mat; Place hot pots on mats to protect your benchtop. Use between pots when stacking to protect the non-stick coating. High sides to reduce splattering

Dimensions (mm): 250L x 215W x 55H Removeable Handle Part Number : FC13 248 Galley - Galley Accessories

Smartspace 3 Pot Set

SmartSpace 3 pot set is a new concept in cookware that fits on even the most compact stoves. Perfect for the RV, boat or baches were space is essential. Each pot stacks neatly inside the next creating a compact easy to store cookware solution. The non-stick finish makes washing up effortless.

Cookware Features: Stainless steel base suitable for gas, electric or induction cooking Durable 3mm aluminium walls Teflon coated non stick interior (high grade) Enamel baked exterior Stainless steel lid Silicone heat resistant knob Steam vent Removable handle does not transfer heat Dishwasher safe Silicone mats; Place hot pots on mats to protect your benchtop. Use between pots when stacking to protect the non-stick coating.

Set includes; 2.8L Pot, Lid and Silicone Pad 1.8L Pot, Lid and Silicone Pad 1.5L Pot, Lid and Silicone Pad Detachable handle

Dimenions (mm) 2.8L pot: 210L x 210W x 140H 1.8L pot: 185L x 185W x 124H 1.5L pot: 162L x 162W x 106H

Part Number : POT3

Removeable Handle

Stainless Steel Deluxe Whistling Kettle Stainless Steel Kettle

2.5 litre capacity 2 litre capacity

Remove the lid to fill with water. Simply open the spout cover with a push of your thumb to Simply open the spout cover with a flick of your thumb to pour. pour or to fill with water.

193mm diameter base 193mm diameter base 210mm total height 140mm total height

Part Number : KETD Part Number : KETSTD

249 Galley - ZipVac Vacuum Bags

ZipVac Marine and RV Kit

1 x lightweight manual pump 2 x 1 litre bags 2 x 4 litre bags 1 x fillet size bag

Part Number : ZVMARINERV

ZipVac Camping Kit

1 x lightweight manual pump 2 x 1 litre bags 2 x 4 litre bags 2 x 8 litre bags

Part Number : ZVCAMPKIT

ZipVac King Fillet Bags

5 x king fillet bags (35cm x 71cm)

Part Number : ZVKINGFILLET

ZipVac Fillet Bags

10 x Fillet Bags (22cm x 50cm)

Part Number : ZVFILLETREFILL

Slip Stop - Non Slip Material

Non slip material cut to size 1ft x 12ft roll

Keep everything safe and secure by preventing slipping and sliding. Washable, easily trimmed material works in tool boxes, rugs, van floors, shelves, dash boards or anywhere things slide around or rattle in your RV. Use as a liner between plates, cups and appliances.

Available in Cream or Blue

Part Numbers : STOPSLIP BLUE STOPSLIP CREAM

250 251 Hatches

254. Nuova Rade 258. Nuova Rade 261. Inspection

Deck Hatches Tackle Box 7 Drawer Ports Storage Hatch 270 x 375 with Box Deck Hatch 448mm x 268mm Storage Hatch 243 x 607 with Box 4” Inspection Port “Top Line” Deck Hatch 480mm x 480mm Storage Hatch 353 x 606 with Box 5” Inspection Port “Top Line” Deck Hatch - Round (Small) 1kg Fire Extinguisher Box - Clear 6.5” Inspection Port “Top Line” Door 4” Inspection Port - Pressure Fit Small Hatch with Box for Control 5” Inspection Port - Pressure Fit Boards 4” Inspection Port 255. Nuova Rade 356 x 397 Storage Hatch 5” Inspection Port for 3 kg LPG Bottle 6” Inspection Port Rectangular Hatch 243 x 607 590 x 480 Storage Hatch 6” Inspection Port with Bag Rectangular Hatch 278 x 378 for 5kg LPG Bottle 6.5” Inspection Port - Pressure Fit Rectangular Hatch 270 x 375 6” Inspection port - Black with Rectangular Hatch 315 x 440 Clear Square Hatch 370 x 375 Rectangular Hatch 353 x 606 260. Glove Boxes / Rectangular Hatch 460 x 510 Storage Shelf Large Access Hatch 262. Hatch Access Hatch - Removable Lid Glove Box with Lock Accessories 306 x 356 Storage Hatch 165 x 285 with Box Access Hatch - Removable Lid Access Hatch 165 x 285 Handle for Top Line 180 Hatch 380 x 380 Utility Box with Lid 110 x 81 Replacement Hatch Handle Side-mount Utility Container Hatch Stay 200-370mm Hatch Stay 330-600mm 257. Lalizas Hatch Insect Screen Windtrap Ventilating Sail for Rectangular Hatch 250 x 606 Hatches Rectangular Hatch 276 x 376 Gas Support Struts Rectangular Hatch 358 x 606 Lock Assembly for Top Line Hatch Rectangular Hatch 460 x 511 Porthole - Oval 225 x 460mm Porthole - Oval 128 x 400mm

263. Lenco Hatch Actuators

Lenco Hatch Lifter - HL800S Lenco Hatch Lifter - HL1200S Lenco Hatch Lifter - HL2400S Lenco Hatch Lifter - HL3000S Lenco Hatch Lifter - HL1600S/24V Lenco Hatch Lift Slide Bracket

252

Hatches - Nuova Rade Deck Hatches

Deck Hatch 448mm x 268mm

Nuova Rade - Deck Hatch with tinted window includes inside frame and opening stay. High quality UV resistant ASA Strong enough to be walked over.

Dimensions: 448mm x 268mm (external size) Cut Out: 389mm x 209mm

CE Approved - Made in Europe

Part Number : 4648

Deck Hatch 480mm x 480mm

Nuova Rade - Deck Hatch with tinted window includes inside frame and opening stay. High quality UV resistant ASA Strong enough to be walked over.

Dimensions: 480mm x 480mm (external size) Cut Out: 430mm x 430mm

CE Approved - Made in Europe

Part Number : 4650

Deck Hatch - Round (Small)

Nuova Rade - Deck Hatch with tinted window includes inside frame and opening stay. High quality UV resistant ASA Strong enough to be walked over.

Overall Diameter: 378mm Cut Out Diameter: 316mm

CE Approved - Made in Europe

Part Number : 195256

254 Hatches - Nuova Rade

Rectangular Hatch 270 x 375

Nuova Rade - Italian Made Hatch Top Line 180° Opening UV resistant ASA Strong enough to be walked over.

External Dimensions: 375mm x 270mm Cut Out: 300mm x 200mm

Part Numbers : 4655 (white) 4656 (grey)

Rectangular Hatch 243 x 607

Nuova Rade - Italian Made Hatch Top Line 180° Opening UV resistant ASA Strong enough to be walked over.

External Dimensions: 607mm x 243mm Cut Out: 530mm x 173mm

Part Numbers : 4653 (white) 4654 (grey)

Rectangular Hatch 315 x 440

Nuova Rade - Italian Made Hatch Top Line 180° Opening UV resistant ASA Strong enough to be walked over.

External Dimensions: 440mm x 315mm Cut Out: 363mm x 243mm

Part Numbers : 4663 (white) 4664 (grey)

Square Hatch 370 x 375

Nuova Rade - Italian Made Hatch Top Line 180° Opening UV resistant ASA Strong enough to be walked over.

External Dimensions: 370mm x 375mm Cut Out: 300mm X 300mm

Part Numbers : 4657 (white) 4658 (grey)

255 Hatches - Nuova Rade Rectangular Hatch 353 x 606

Nuova Rade - Italian Made Hatch Top Line 180° Opening UV resistant ASA Strong enough to be walked over.

External Dimensions: 606mm x 353mm Cut Out: 530mm x 283mm

Part Numbers : 4659 (white) 4660 (grey)

Rectangular Hatch 460 x 510

Nuova Rade - Italian Made Hatch Top Line 180° Opening UV resistant ASA Strong enough to be walked over.

External Dimensions: 510mm x 460mm Cut Out: 445mm x 390mm

Part Numbers : 4661 (white) 4662 (grey)

Large Access Hatch

Nuova Rade - Italian Made Hatch Removable hatch cover. UV resistant ASA

External Diameter: 315mm Access Hole: 235mm (dia) Cut Out for installation: 265mm (dia)

Part Number : 4625 (white)

Access Hatch - Removable Lid 306 x 356

Nuova Rade - Italian Made Hatch Removable hatch cover. UV resistant ASA External Dimensions: 306mm x 356mm Internal Dimensions: 246mm x 296mm

Part Numbers : 4642 (white) 4643 (grey)

Access Hatch - Removable Lid 380 x 380

Nuova Rade - Italian Made Hatch Removable hatch cover. UV resistant ASA External Dimensions: 380mm x 380mm Internal Dimensions: 295mm x 295mm

Part Number : 4644 (white) 256 Hatches - Lalizas

Rectangular Hatch 250 x 606

Lalizas Hatch 180° Opening

External Dimensions: 606mm x 250mm Cut Out: 530mm x 173mm

Part Number : 11103 (white)

Rectangular Hatch 276 x 376

Lalizas Hatch 180° Opening

External Dimensions: 376mm x 276mm Cut Out: 300mm x 200mm

Part Number : 10262 (white)

Rectangular Hatch 358 x 606

Lalizas Hatch 180° Opening

External Dimensions: 606mm x 358mm Cut Out: 530mm x 280mm

Part Numbers : 10264 (white) 10265 (grey)

Rectangular Hatch 460 x 511

Lalizas Hatch 180° Opening

External Dimensions: 511mm x 460mm Cut Out: 442mm x 386mm

Part Numbers : 11101 (white) 11102 (grey)

257 Hatches With Boxes - Nuova Rade

Tackle Box 7 Drawer

Nuova Rade - Italian Made Hatch with box and 7 drawers Top Line 180° Opening UV resistant White ASA

Great for organising small things such as fishing tackle.

Dimensions: 375mm x 270mm x 160mm (D) Cut Out: 305mm x 210mm

Part Numbers : 4504 (white) 4503 (grey) Side-mount Housing with Door

Designed for holding a shower nozzle

Dimensions: 145mm x 190mm x 80mm(D) Cutout: 114mm x 160mm

Part Number : 6570

Storage Hatch 270 x 375 with Box

Nuova Rade - Italian Made Hatch with box Top Line 180° Opening UV resistant White ASA

Dimensions: 375mm x 270mm x 160mm (D) Cut Out: 305mm x 210mm

Part Numbers : 4505 (white) 4506 (grey) Storage Hatch 243 x 607 with Box

Nuova Rade - Italian Made Hatch with box Top Line 180° Opening UV resistant White ASA

Strong enough to be walked over.

Dimensions: 607mm x 243mm x 182mm (D) Cut Out: 530mm x 173mm

Part Number : 4652 Storage Hatch 353 x 606 with Box

Nuova Rade - Italian Made Hatch with box Top Line 180° Opening UV resistant White ASA

Strong enough to be walked over.

Dimensions: 606mm x 353mm x 340mm (D) Cut Out: 530mm x 283mm

Part Number : 4665 258 Hatches With Boxes - Nuova Rade

1kg Fire Extinguisher Box - Clear Door

Nuova Rade - Italian Made Hatch and box

Allows safe and protected storage of a fire extinguisher in the cockpit or dashboard. UV resistant White ASA

Dimensions: 434mm x 196mm x 105mm (D) Cut Out: 374mm x 124mm

Part Number : 4677 Small Hatch with Box for Control Boards

Small Hatch with internal surround for mounting hardware. When equipment needs to be accessible and yet kept dry this hatch provides the ideal enclosure. UV resistant White ASA

Multiple uses: *Battery Isolating Switches *Electrical Switch Panels *Lighting; Entertainment Controls

External Dimensions: 275mm x 375mm x 80mm(D) Cutout: 210mm x 310mm

Part Numbers : 4680 (box with white hatch) 4681 (box with transparent hatch door)

356 x 397 Storage Hatch for 3 kg LPG Bottle

Nuova Rade - Italian Made Hatch with box Top Line 180° Opening UV resistant White ASA

External Dimensions: 356(W) x 397(H) x 240mm(D) Cut Out for hatch: 338mm x 305mm

Part Number : 4672

590 x 480 Storage Hatch for 5kg LPG Bottle

Nuova Rade - Italian Made Hatch with box Top Line 180° Opening UV resistant White ASA

Cut Out for hatch: 525mm x 415mm

Part Number : 4673

259 Hatches - Glove Boxes / Storage Shelf

Glove Box with Lock

Black ABS with a Non Magnetic Marine Lock

Dimensions: 13-1/2” (L) x 5-1/2” (H) x 7-1/2” (D) Inside: 12-1/2” (L) x 4 (H) x 6-1/2” (D)

Part Number : 71052

Storage Hatch 165 x 285 with Box

Nuova Rade - Italian Made Hatch with box 180° Opening, UV resistant ASA

Dimensions: 165mm(H) x 285mm(W) x 250mm(D) Cut Out: 140mm x 250mm

Part Number : 4635W

Access Hatch 165 x 285

Nuova Rade - Italian Made Hatch 180° Opening, UV resistant ASA Great to make your own Glove box!

Dimensions: 165mm(H) x 285mm(W) Cut Out: 140mm x 250mm

Part Number : 4634W

Utility Box with Lid 110 x 81

Nuova Rade - Italian Made box with lid UV resistant ASA

Dimensions: 110mm(H) x 235mm(W) x 150mm(D) Cut Out: 81mm x 198mm

Part Number : 4632W

Side-mount Utility Container

Available with or without built in glass holders

Dimensions: 561mm(L) x 266mm(W) x 125mm(D) Cutout: 496mm x 200mm

Part Numbers : 4678 (Storage Shelf Container) 4679 (Storage Shelf with glass holders)

260 Hatches - Inspection Ports 4” Inspection Port “Top Line” 4” Inspection Port

* Water Resistant O-Ring * Water Resistant O-Ring * Self centering thread * Screw in-out design

162mm over all 148mm over all 108mm internal hole 105mm internal hole

Part Numbers : 4361 (White) Part Numbers : 4354 (Black) 4363 (Grey) 4357 (White)

5” Inspection Port “Top Line” 5” Inspection Port

* Water Resistant O-Ring * Water Resistant O-Ring * Self centering thread * Screw in-out design

187mm over all 168mm over all 133mm internal hole 127mm internal hole

Part Numbers : 4364 (White) Part Numbers : 4358 (Black) 4366 (Grey) 4355 (White)

6.5” Inspection Port “Top Line” 6” Inspection Port

* Water Resistant O-Ring * Water Resistant O-Ring * Self centering thread * Screw in-out design

222mm over all 207mm over all 188mm internal hole 155mm internal hole

Part Numbers : 4367 (White) Part Numbers : 4359 (Black) 4369 (Grey) 4356 (White)

4” Inspection Port - Pressure Fit 6” Inspection Port with Bag

* Water Resistant O-Ring * Water Resistant O-Ring * Pressure Fit * Screw in-out design * Attached Canvas Bag 162mm over all 108mm internal hole 207mm over all 155mm internal hole Part Number : 4371 Part Number : 4356BAG

5” Inspection Port - Pressure Fit 6.5” Inspection Port - Pressure Fit

* Water Resistant O-Ring * Water Resistant O-Ring * Pressure Fit * Pressure Fit

187mm over all 222mm over all 133mm internal hole 188mm internal hole

Part Number : 4374 Part Number : 4377

261 Hatches - Inspection Ports & Hatch Accessories

6” Inspection port - Black with Clear Windtrap Ventilating Sail for Hatches

Deck Plate, bayonet screw design (no tools required to open). The ‘Windtrap’ is aerodynamically designed to provide optimum For inspection of and general access to valves and deck vents. ventilation in your cabin, channelling the air down into the hatch. Made of High impact ABS material. It is made from strong nylon for durability and high resistance against the strong winds. If Dimensions installed correctly, it will not Overall dia: 210mm flutter and will prevent any Internal dia: 156mm whistling and flapping noise. Cut-out: 170mm The ‘Windtrap’ is packed in its Part Number : 4359C own storage bag.

Part Number : 11087 Handle for Top

Line 180 Hatch

Nuova Rade

Part Numbers : Gas Support Struts 4666 (Cream) 4667 (Grey) Stainless steel construction with 4668 (White) Bracket & Studs

Two lengths available:

Replacement Hatch Handle 116831 is 255mm long extended with 90mm stroke Replacement Handle for 116830 is 385mm extended with older style Nuova Rade 155mm stroke Hatches Part Numbers : Part Numbers : 116830 (385mm long) 4623W (White) 116831 (255mm long) 4623G (Grey) 11630-BP (385mm long Blister Packed) 116831-BP (385mm long Blister Packed) Hatch Stay 200-370mm Lock Assembly for Used for securing hatches partially or fully open. Top Line Hatch

Marine grade stainless steel Part Number : 4670 Can be clamped tight in any position with plastic knobbed bolt. Adjusts from 200 to 370mm Hatch Insect Screen Part Number : 62500-02 These fly net type screens are Hatch Stay 330-600mm used as a protection against all kinds of insects, while the hatch Suitable for securing hatches is open in order to ventilate the partially or fully open. cabin.

Marine grade Stainless steel sliding tube There are two sizes available; for with brass plated mounting fittings. use with hatches with maximum Can be clamped tight in any dimensions of either 540x540mm position with plastic knob. or 650 x 650mm. Adjusts from 330 to 600mm Part Numbers : 70983 (540 x 540mm hatch) Part Number : 62507 70984 (650 x 650mm hatch) 262 Hatches - Portholes & Lenco Hatch Actuators

Porthole - Oval 128 x 400mm Porthole - Oval 225 x 460mm

Oval shaped portlight for exterior use on boats. Full stainless steel Oval shaped portlight for exterior use on boats. Full stainless steel frame. Can not be opened. frame. Can be hinged open from the inside and has a watertight seal. Dimensions: 128 x 400mm overall Dimensions: Internal finishing frame depth = 13mm 225 x 460mm overall

Part Number : 13620 Part Number : 13624

Lenco Hatch Lifters

To raise a hatch and keep it in position at the press of a button, Lenco Marine offers its electric Hatch Lifters. Based on a ball screw design, Lenco’s hatch Lifts open and close bulky hatches without slipping. The fast and powerful in-line motor delivers up to 500 pounds (226.79kg) of thrust while only drawing around 5 amps. To raise or lower a hatch, boaties simply use a rocker switch.

The Hatch Lifts are designed specifically to meet the demands of the marine environment. They are construced entirely of non-corrosive materials and are completely submersible, ensuring reliable performance. Unlike hydraulic models, Lenco’s lifts install easily with a single power cable. An optional non-locking slide bracket allows easy access to the mounting bracket should any problems arise preventing operation of the lift.

Lenco Hatch Lifter - HL800S

LOA Retracted (cm): 53.34 LOA Extended (cm): 73.66 Stroke (cm): 20.32

12 Volt

Part Number : 5661

Lenco Hatch Lifter - HL1200S

LOA Retracted (cm): 63.50 LOA Extended (cm): 93.98 Stroke (cm): 30.48

12 Volt

Part Number : 5663

263 Hatches - Lenco Hatch Actuators

Lenco Hatch Lifter - HL2400S

LOA Retracted (cm): 93.98 LOA Extended (cm): 154.94 Stroke (cm): 60.96

12 Volt

Part Number : 5669

Lenco Hatch Lifter - HL3000S

LOA Retracted (cm): 119.38 LOA Extended (cm): 195.58 Stroke (cm): 76.20

12 Volt

Part Number : 5673

Lenco Hatch Lifter - HL1600S/24V

LOA Retracted (cm): 73.66 LOA Extended (cm): 114.30 Stroke (cm): 40.64

24 Volt

Part Number : 5665-24

Lenco Hatch Lift Slide Bracket

The Lenco slide bracket for hatch lifters enables you to lift the hatch manually to allow access to the mounting bolt and essentially the space behind the hatch, should a power failure or electrical issue occur on board.

Part Number : 5658

264

Lights

Spotlight 100W Surface Mount LED Light 267. Navigation 272. Tri-Colour / Smart Spot Light with Wireless SS LED Dome Lights - 12 Volt Lights for vessels Remote Control SS 5”LED Dome Light - 12 Volt Anchor Lights Spot Light - Surface Mount 12V LED Dome Light HELLA 2NM NaviLED TRIO Tri- less than 12m 60W LED Dome Light , 91 LEDs - 24V Colour Navigation Light LED Navigation Lights - 12V Euro LED Touch Lamp - Hella HELLA 2 NM Tri-Colour / Anchor LED Navigation Lights LED Dome Light with Dimmer Navigation Light Navigation Lights - Side Mounted LED Wireless Mini Dome Light Tri-Colour Combo Light LED Masthead Light 277. Handheld / LED light - flush mount - Ø77mm LED Stern Light Work Lights MaXtek LED Starboard Light Hand Spot / Working Light MaXtek LED Port Light 273. Pole Lights / LED Torch 282. Chart Lights MaXtek LED Stern Light Portable Halogen Spotlight & Courtesy Lights Port Light All Round Lights Fluorescent Worklight 12V / 8W All Round White Light S12 Chrome Cabin Dome Light - LED Starboard Light Clip-on Caplight, LED All Round Red Light S12 LED Light Rail - White Masthead Light Rubber Spot Light All Round Pole Light Flexible LED Chart Light Stern Light Utility Light Sea Power 12V / 10W LED All-Round Anchor Light - White Lighter Socket with Chart Light Port Light 12V Energy Efficient Utility Light MaXtek LED All Round White Light Courtesy Light Flush Mount - Black Starboard Light Headlamp LED Port Light - Round Fixed All-Round White Light LED Mini Courtesy Light Starboard Light LED Courtesy Light Stern Light - Round 278. LED Bulbs LED Chart Light Stern Light - N12 G4 Origin LED Bulb with Side Pins LED Courtesy Light Emergency Nav Light Set 274. Pole Lights LED Bulb - MR16 10SMD Round LED Lamp Emergency White All Round Light and more... LED Bulb - MR11 6SMD Flush Mount Strip Light MaXtek All Round LED White Light LED Bulb - 12V Bayonet Pole light base LED Bulb, Bayonet 15d 270. Navigation Hella 8505 Masthead/Floodlight LED Bulb, Bayonet 15d 283. Interior Lights Light LED Bulb - 12V All Round Lights for vessels Lalizas Combo Masthead and Deck LED Bulb - 12V All Round - Offset - Fluorescent Light Pins Fluorescent Light - UL Approved less than 20m MaXtek LED Flush Mount Light LED Bulb 12V - Cool White 1.5W - Fluorescent Light - Single Tube Port Light - N20 MaXtek LED Flush Mount Light Offset Pins Fluorescent Light - Dual Tube Starboard Light N20 Round LED Bulb 12V - Cool White 1.5W - Fluorescent Light - UL Approved Stern Light - N20 LED Navigation Light - Deck Parallel Pins LED Fluorescent Light - 32 LED’s Masthead Light N20 Mounted LED Bulb 12V - cool white - 360° LED Fluorescent Light - 12 LED’s Bi-Colour Light N20 LED Bulb - 12V All Round BA9S Tri-Colour & Anchor Light LED Bulb - Festoon 39mm Red Signal 360 degree Light LED Bulb - 12V 284. Solar Lights White Signal 360 degree Light 275. Spot Lights LED Bulb - 12V Sealite SL70 2-3nm Solar Marine Port Light 12V LED LED Bulb - 12V Light Starboard 12V LED and other Exterior LED Switch Panel Lights Sealite SL60 2-3nm Solar Marine Port Light - 2NM Light Starboard Light 2NM Lights Sealite SL15 1-2nm Solar Marine Spotlight Mounted - 91 LEDs Stern Light - 2NM Light Deck Light - 36 LEDs Masthead Light 3NM Solar Powered LED Marker Light PVC Spreader light 280. Interior Lights Port 3NM LED Solar Dock Light Flush Mount Waterproof LED Light Starboard 3NM LED LED Deck Light Stern 3NM LED LED Deck Spot Floodlight - Adjustable Lacquered Brass Reading Light Masthead 3NM LED 286. Underwater White Deck / Flood Light Flush Mount Ball Eye LED Stern Light 12V LED Flush Mount Waterproof LED Light Ball Eye LED Light Lights with Stainless Steel Rim Oval LED “push on/off” light Underwater Light - Surface LED Surface Mount “push on/off” Mount LED Aluminium LED Light - 60mm base Waterproof High Intensity LED LED Mini Reading Light Underwater Lights 276. Spot Lights Slim SS LED Dome Light - 16 LED Waterproof LED Strip Lights Marinco Wireless Remote Slim SS LED Dome Light - 28 LED 266 Lights - Navigation Lights for vessels less than 12m

LED Navigation Lights - 12V LED Navigation Lights

Powerful Long Life LED 12V 5W Lights Navigation lights Black or White Plastic Casing Side Mounted Supplied as a Port and Extremely low power Starboard Pair consumption 135 (L) x 60 (W) x 47mm (D) Sealed waterproof housing sit on a rubber Part Numbers : mounting gasket. 3186 (Black Non LED) UV resistant marine grade housing 3186BLED (Black LED) 200mm wire lead attached. 3186WLED (White LED) 3186BLED-BP (Black LED Blister Packed) Dimensions: 90 (L) x 55 (W) x 35mm (H) 3186WLED-BP (White LED Blister Packed) Sold as a Pair - Port and Starboard

Part Numbers : 00220-B (Black) 00220-W (White) 00220-B-BP (Black Blister) Navigation Lights - Side Mounted 00220-W-BP (White Blister) 00220-SS (Stainless Steel Blister) Voltage 12V 5W Lights

Black UV resistant marine grade housing.

Dimensions: 88.9 (L) x 57 (W) x 38mm (H)

Sold as a Pair - Port and Starboard

Part Numbers : 00221-B

LED Masthead Light LED Stern Light

12 Volt , 0.5 watt 12 Volt , 0.5 watt 225º viewing angle 135º viewing angle

This navigation light has 9 x 5mm This navigation light has 9 x 5mm Cool White LED bulbs inside the Cool White LED bulbs inside the casing for reliability and low power casing for reliability and low power consumption. consumption.

Dimensions: 75mm(height) x Dimensions: 75mm(height) x 65mm(width) x 56mm (depth) 65mm(width) x 56mm (depth)

CE, RoHS and international rules CE, RoHS and international rules approved. approved.

White or Black body colour options White or Black body colour options

Part Numbers : Part Numbers : 00131-WLD (White Body) 00141-WLD (White Body) 00131-LD (Black Body) 00141-LD (Black Body) 00131-LD-BP (Black Blister Packed) 267 Lights - Navigation Lights for vessels less than 12m

MaXtek LED Starboard Light MaXtek LED Port Light

12 Volt , 0.5 watt 12 Volt , 0.5 watt 112.5º viewing angle 112.5º viewing angle

This navigation light has 9 x 5mm Cool This navigation light has 9 x 5mm Cool Green LED bulbs inside the casing for Red LED bulbs inside the casing for reliability and low power consumption. reliability and low power consumption.

Dimensions: 75mm(height) x Dimensions: 75mm(height) x 65mm(width) x 56mm (depth) 65mm(width) x 56mm (depth)

CE, RoHS and international rules CE, RoHS and international rules approved. approved.

White or Black body colour options White or Black body colour options

Part Numbers : Part Numbers : 00111-WLD (White Body) 00121-WLD (White Body) 00111-LD (Black Body) 00121-LD (Black Body) 00111-LD-BP (Black Body Blister Pack) 00121-LD-BP (Black Body Blister Pack) MaXtek LED Stern Light

12 Volt , 0.5 watt 225º viewing angle

This navigation light has 9 x 5mm Cool White LED bulbs inside the casing for reliability and low power consumption.

Dimensions: 75mm(height) x 65mm(width) x 56mm (depth)

CE, RoHS and international rules approved.

White or Black body colour options

Part Numbers : 00142 (Black Body) 00142-BP (Black Body Blister Pack) Port Light Starboard Light

75 (H) x 65 (W) x 57mm (D) 75 (H) x 65 (W) x 57mm (D)

Part Numbers : Part Numbers : 00121-WH (White Body) 00111-Wh (White Body) 00121 (Black Body) 00111 (Black Body)

Stern Light Masthead Light 60 (H) x 42 (W) x 34mm (D) 60 (H) x 42 (W) x 34mm (D) Part Number : Part Numbers : 3178WB (White Body) 3174WB (White Body) 3174BB (Black Body) 268 Lights - Navigation Lights for vessels less than 12m

Starboard Light Port Light 60 (H) x 42 (W) x 34mm (D) 60 (H) x 42 (W) x 34mm (D) Part Numbers : Part Numbers : 3166WB (White Body) 3170WB (White Body) 3166BB (Black Body) 3170BB (Black Body)

Port Light - Round Starboard Light

65mm (dia) x 40mm (H) 65mm (dia) x 40mm (H)

Part Number : Part Numbers : 30072 (White Body) 30071 (White Body) 30061 (Black Body)

Stern Light - N12 Stern Light - Round 70 (H) x 60 (W) x 55mm (D) 65mm (dia) x 40mm (H) Part Numbers : Part Numbers : 30093 (Black Body) 30073 (White Body) 30063 (Black Body)

Emergency Nav Light Set Emergency White All Round Light

These emergency navigation lights are ideal for use on small crafts Requires D size battery and inflatable boats, or as emergency lighting in larger vessels. Approx 9 hours continuous use. They are waterproof and complete with brackets that are fastened on the boat. They can be used when conventional lights are not Dimensions: 130mm high x 54mm diameter. suitable for the vessel or when they are not operating. Emergency nav lights are available with external light reflectors. Part Number : 30003

Requires D size battery Approx 9 hours continuous use.

Set includes port, starboard and a white all round light.

Dimensions: 130mm high x 54mm diameter.

Part Number : 30010 269 Lights - Navigation Lights for vessels less than 20m

Port Light - N20 Starboard Light N20

Lalizas Lalizas 100 (h) x 105 (w) x 90mm (d) 100 (h) x 105 (w) x 90mm (d)

Part Numbers : Part Numbers : 30512 (White Body) 30511 (White Body) 30502 (Black Body) 30501 (Black Body)

Stern Light - N20 Masthead Light N20

Lalizas Lalizas 100 (h) x 105 (w) x 90mm (d) 100 (h) x 105 (w) x 90mm (d)

Part Numbers : Part Numbers : 30513 (White Body) 30514 (White Body) 30503 (Black Body) 30504 (Black Body)

Bi-Colour Light N20 Tri-Colour & Anchor Light Lalizas Port and Starboard as one Lalizas 100 (h) x 105 (w) x 90mm (d) Port, Starboard, Stern and Anchor 195 (H) x 85 (W) x 85mm (D) Part Numbers : 30515 (White Body) Part Number : 30505 (Black Body) 30415 (Black Body)

Red Signal 360 degree Light White Signal 360 degree Light

105mm (h) x 85mm x 85mm 105mm (h) x 85mm x 85mm

Lalizas Light - Approved for vessels Lalizas Light - Approved for vessels under 20m under 20m

Part Number : 30522 Part Number : 30523

Port Light 12V LED Starboard 12V LED

High Power 1.3W , 12V LED High Power 1.3W , 12V LED 112.5º, Distance 2NM 112.5º, Distance 2NM 108(W) x 92(L) x 60mm(H) 108(W) x 92(L) x 60mm(H)

Part Number : Part Number : 00292-LD (White Body) 00291-LD (White Body)

270 Lights - Navigation Lights for vessels less than 20m

Port Light - 2NM Starboard Light 2NM

Hella Hella 108 (h) x 107 (w) x 90mm (d) 108 (h) x 107 (w) x 90mm (d)

Part Number : Part Number : 2854W (White Body) 2853W (White Body)

Masthead Light 3NM Stern Light - 2NM Hella Hella 108 (h) x 107 (w) x 90mm (d) 108 (h) x 107 (w) x 90mm (d) Part Number : Part Number : 2850W (White Body) 2851W (White Body)

Starboard 3NM LED Port 3NM LED Hella NaviLED Pro Hella NaviLED Pro Less than 2W , 9-33 Volt LED Less than 2W , 9-33 Volt LED IP67 Certified, Distance 3NM IP67 Certified, Distance 3NM 90 (h) x 87 (w) x 57mm (d) 90 (h) x 87 (w) x 57mm (d) Part Number : Part Number : 2LT959908-211 (White Body) 2LT959900-211 (White Body)

Stern 3NM LED Masthead 3NM LED

Hella NaviLED Pro Hella NaviLED Pro Less than 2W , 9-33 Volt LED Less than 2W , 9-33 Volt LED IP67 Certified, Distance 3NM IP67 Certified, Distance 3NM 90 (h) x 87 (w) x 57mm (d) 90 (h) x 87 (w) x 57mm (d)

Part Number : Part Number : 2LT959909-211 (White Body) 2LT959940-211 (White Body)

Stern Light 12V LED Masthead 12V LED

High Power 3.36W , 12V LED High Power 3.36W , 12V LED 135º, Distance 2NM 225º, Distance 2NM 108(W) x 92(L) x 60mm(H) 108(W) x 92(L) x 60mm(H)

Part Number : Part Number : 00294-LD (White Body) 00293-LD (White Body)

271 Lights - Tri-Colour / Anchor Lights

HELLA 2NM NaviLED TRIO Tri-Colour Navigation Light

LED Tri-Colour with Anchor navigation lamp.

Features: *Ultra low current draw. Power saving on board. Port, Starboard and Stern draws less than 3.5W *Fully sealed for life. IP 67 Certified. *Safe and highly visible. *Advanced heavy duty Grilamid® lens and housing, plus proven Hella marine LED technology. *Unique installation and removal system. *The NaviLED®Trio installs on a unique 316 stainless steel mounting shaft for a secure attachment and reliable electrical connections.

Specifications: Minimum Visible Distance: 2 Nautical Miles (Yacht) Operating Voltage: Multivolt 8-28V DC Power Consumption: Port, Starboard and Stern - Less than 3.5W combined All Round White / Anchor - Less than 1.5W Degree of Protection: IP 67

Part Number : 2LT980650-001

HELLA 2 NM Tri-Colour / Anchor Navigation Light

HELLA Tri-Colour lamp with an integrated All Round White / Anchor Lamp for attachment to yacht masts.

Features: *Non-magnetic and saltwater resistant. *The lamp housing features a bayonet lock for easy bulb change.

Specifications: Minimum Visible Distance: 2 Nautical Mile Bulb: 12V / 25W BAY15d included Degree of Protection: IP 55

Part Number : 30416

Tri-Colour Combo Light

Features all around white, port and starboard lights

Made of UV stabilized ABS plastic, with shatter-proof acrylic lens, non magnetic stainless steel electrical contacts and a nitrile water resistant seal to provide reliable long life.

Made in Europe 170(H) x 125(W) x 44mm

Part Number : 30429

272 Lights - Pole Lights / All Round Lights

All Round White Light S12 All Round Red Light S12

Approved for vessels under 12 metres. Approved for vessels under 12 metres. UV stabilized ABS plastic with shatter- UV stabilized ABS plastic with shatter- proof acrylic lens, stainless steel proof acrylic lens, stainless steel electrical contacts and a nitrile water electrical contacts and a nitrile water resistant seal. 12V 10W bulb. resistant seal. 12V 10W bulb.

Part Number : 30111 Part Number : 30113

All Round Pole Light LED All-Round Anchor Light - White

All Round Pole Light , 12 Volt, 1 Watt High Power LED 23cm long Folding 60mm x 30mm x 80mm (h) Housing Colour: White Beam Angle: 140º Colour Temp: Daylight White 4500- Part Number : 30763 6000K

Part Number : 00130-LD

MaXtek LED All Round White Light

1 x 0.5W 12V High Power White LED Water-Resistant 9-1/2” (240mm) high with adjustable mount

Working Voltage: 8-30 Volt DC Wattage: 0.5W Beam Angle: 120º Colour Temp: Daylight White 4500-5500K

Now available in a Blister Pack

Part Numbers : 01126-LD 01126-LD-BP (Blister Packed)

Fixed All-Round White Light

S.S. Tube. Height 9”. 12V 5W Bulb.

Part Number : 00115

273 Lights - Pole Lights and more...

MaXtek All Round LED White Light Pole light base

915mm pole - removable base To suit 00026-36 pole light 15° universal plug-in mount 15º angle. 1 x 0.5W High Power White LED Water Resistant Part Number : 00125-S Working Voltage: 8-30 Volt DC

Part Number : 00026-36

Lalizas Combo Masthead and Deck Hella 8505 Masthead/Floodlight Light Light Made of Plastic, For Sailboats & Power Boats Up To 12m. Deck Floodlight and Masthead Lamp combined in one robust 12V 10W Masthead Bulb housing. 12V 20W Halogen Lamp For Deck Light. Suitable for vessels less than 12m in length. UV and impact resistant plastic housing Part Number : 30499 Bulb: 12V / 10W SV8.5 and 12V / 20W GX5.3 bulbs included Degree of Protection: IP X4 Maximum Output: Deck lamp 12V / 20W Black or White Housing

Part Number : 30500

MaXtek LED Flush Mount Light MaXtek LED Flush Mount Light

130mm x 83mm x 32mm (d) Round Stainless Steel Finish White 12V LED Bulb 3” Diameter 12 volt , 0.54W Stainless Steel Finish IP66 Waterproof Low power & long life LED 12 volt , 0.54W Part Numbers : IP66 Waterproof 00300 Blister Packed 00300-BP (Blister Packed) Part Number : 3182-LED

LED Navigation Light - Deck Mounted

Voltage: 12 Volt DC Wattage: 0.72 W LED Lifetime: 50000hrs Beam Angle: 120º IP66 waterproof

100mm (l) x 80mm (w) x 45mm (h)

Part Number : 00154-LD 274 Lights - Spot Lights and other Exterior Lights

Lalizas Spotlight Mounted - 91 LEDs Deck Light - 36 LEDs

* 91 White LEDs * 36 Cool White LEDs * Rubber Body *12 Volt * Very Low power consumption *Rain and Splash Proof. * Waterproof *U bracket and bolt on back for mounting. Part Numbers : 70678 (12 Volt) Part Number : 01613-WH 70679 (24 Volt)

LED Deck Light Deck Spot Floodlight - Adjustable

* 8 to 30 Volt Waterproof rubber housing and * Powerful all LED (6 x 3w LEDs) Stainless Steel Mounting hardware. * Waterproof IP66 4” diameter lens * Alloy and stainless construction 12 Volt, 35 Watt Halogen Beam * CE and ROHS certified Part Number : 00806-WH Part Number : 01609-WB

PVC Spreader light White Deck / Flood Light

Stainless Steel & PVC Construction 12V 70W Designed for illuminating the deck of a 7”(W) X 4.5”(H) boat from the mast and spreaders. ABS Housing Adjustable S.S. Bracket 12V , 35W Halogen Beam 122mm (dia) x 150mm (l) Part Number : 00802-12

Part Number : 00805-WH

Flush Mount Waterproof LED Light Flush Mount Waterproof LED Light with Stainless Steel Rim Includes spacer so that it could also be surface mounted. 86(L) x 31(W) x 9mm(H) 12 Volt DC , 0.22W 12 Volt DC , 0.21W Part Numbers : 00158-WH (White) Part Numbers : 00158-RD (Red) 00159-SSWH (with White LEDs) 00159-SSBU (with Blue LEDs)

275 Lights - Spot Lights

Marinco Wireless Remote Spotlight 100W

Marinco Wireless Remote Spotlight - Suitable for Marine and Vehicle

Wireless Remote Control Spot Light with fully wireless remote. Can be hardwired if required.

The universal mounting system even allows it to be mounted upside-down. Comes complete with a wireless dash mount remote as standard. Light can be hardwired to the optional dash mount control and a hand held wireless controller is also available as option extras (available separately).

*5 Year limited warranty

Part Numbers : SPL-12B (Black 12V) SPL-24B (Black 24V) SPL-12C (Chrome 12V) SPL-24W (White 24V) SPL-12W (White 12V)

Optional Wired Bridge remote Available Pt No: SPRL-3

Smart Spot Light with Wireless Remote Control

Direct the powerful beam through a full 420º rotation and 120º of vertical sweep by using the simple to use wireless remote.

* 12V lamp, 55W Halogen Bulb - H3 * RF range - 75m * Waterproof to IP66 + UV and Salt water resistant * Comes with wiring loom and deutch style connector plugs * CE approved

* TWO YEAR warranty (excludes lamp)

Part Numbers : 01656-WH (Side Out Cable) 01656-WH-SP (Down Out Cable)

Spot Light - Surface Mount 12V 60W

This powerful forward looking Spotlight features an adjustable bracket allowing you to orientate the light through 180º arc vertically. Light can be mounted on any flat surface so can be used to look forward horizontally or any vertical plane.

* 12 Volt Lamp - Sealed beam 60W * 2 brightness settings, i.e can work as a deck light or spot light.

Dimensions: 180mm x 120mm Housing. 165mm x 45mm Surface Mount Base..

Wiring: Brown as negative, Blue is high beam + , Yellow is low beam + .

Part Number : 01607-WB 276 Lights - Handheld / Work Lights

Hand Spot / Working Light LED Torch

12V / 55W Halogen Bulb Button turns on/off and selects either 24 Plastic Casing LEDs on one side, or 3 LEDs on the end. 12 ft Cord. Magnet and fold-out hook on back, allows Part Number : 01686 for when you need your hands free.

Dimensions: 98 x 63 x 33mm

Part Number : LEDTORCH

Portable Halogen Spotlight Utility Light Sea Power 12V / 10W

12 Volt, 5A, 100W halogen bulb 12 Volt ,10W bulb, a reflector and a 127mm wide lens. hook.

* Rugged impact resistant ABS plastic The Utility Light ‘Sea Power’ housing. is made of highly resistant * On/Off switch on the handle for one- polypropylene and has a 4m cable handed operation. with a cigarette lighter plug. * Coiled cable can be extended up to 2.8m Part Number : 31312 * Universal cigarette lighter plug.

Part Number : 31309

Headlamp LED 12V Energy Efficient

Bulb type: 8 LED Utility Light Batteries: 3 x AAA Three working modes: This water proof light can be 2LED / 4LED / 8LED / OFF suspended to provide light for IP44 - Splashproof entertainment, chart reading, Diameter: 68mm working or use as a courtesy light. Size: 30x77mm * Has automatic switch on at dusk / Weight: 95.3gr off at dawn. * CE Rated * 2 Bulbs: a High-Efficiency 0.1A bulb with visibility 2NM and a Part Number : 31371 0.24A Bright bulb.

* 2 Function lens: Fresnel lens for visibility 2NM and clear bottom for area lighting. * Comes with 15’ cord & cigarette lighter plug.

Part Number : 01644

277 Lights - LED Bulbs

G4 Origin LED Bulb with Side Pins LED Bulb - MR16 10SMD

8-30 Volt - Warm white Resistant to voltage fluctuations common on Fittings : 2 x 10mm side pins boats and motorhomes. 25mm (overall dia) Warm White 1.2 watts 10-30 Volt DC Brightness: 60 Lumens 49mm Diameter Equivalent to: 6 W halogen RoHS & CE Approved

Part Number : LED-G4 Part Number : LED-MR16 LED Bulb - 12V Bayonet LED Bulb - MR11 6SMD 19 Cool White LEDs per bulb 12 Volt Resistant to voltage fluctuations common on Part Numbers : boats and motorhomes. 02166 - (Offset Pins Dual contacts on base) Warm White 10-30 Volt DC 02167 - (Parallel Pins 34mm Diameter Single contacts on base) RoHS & CE Approved

Part Number : LED-MR11 LED Bulb, Bayonet 15d

12 Cool White LEDs per bulb LED Bulb, Bayonet 15d 12 Volt , 1 W 9 Cool White LEDs per bulb Two contacts on the bottom with 12 Volt , 0.7 W parallel pegs on each side. Two contacts on the bottom with Dimensions: parallel pegs on each side. 48 (l) x 26 (w) x Depth 18mm Dimensions: 30 x 18mm Part Number : 00163-WH Part Number : 00063-WH

LED Bulb - 12V All Round LED Bulb - 12V All Round - Offset Pins

18 Cool White LEDs per “bulb” 36 Cool White LEDs per “bulb” Parallel Pins Offset Pins Single contact on base Dual contacts on base

Light Voltage Range DC 10.5V-15.8V Light Voltage Range DC 10.5V-15.8V Low heat output, low power consumption Low heat output, low power consumption Works with some pole lights to convert Works with some pole lights to convert from from standard bulb to LED standard bulb to LED

Part Number : 71228 Part Number : 71230

278 Lights - LED Bulbs

LED Bulb 12V - Cool White 1.5W - LED Bulb 12V - Cool White 1.5W - Offset Pins Parallel Pins

LED Bulb 12V - Cool White 1.5W - Offset LED Bulb 12V - Cool White 1.5W - Pins Parallel Pins

Dual Contact, 90LM Dual Contact, 90LM

Dimensions: 24mm diameter x 40mm high Dimensions: 24mm diameter x 40mm high

Part Number : 01169-WH/1 Part Number : 01169-WH

LED Bulb 12V - cool white - 360° LED Bulb - 12V All Round BA9S

LED Bulb 12V - cool white - 360° -bayonet 4 Cool White LEDs per “bulb” parallel pins Parallel Pins Single contact on base 15d (DUAL contact) 13 LEDs Light Voltage Range DC 10.5V-15.8V Dimensions: 18mm diameter x 42mm high Low heat output, low power consumption Works with some pole lights to convert from Part Number : 01167-WH standard bulb to LED

Part Number : 71233

LED Bulb - Festoon 39mm LED Bulb - 12V

4 cool white LEDs on each side (total 8 leds 6 High Power Cool White LEDs per “bulb” per bulb) creates a 360 º light. 12V , ~0.5A 42mm Festoon Light Voltage Range DC 10.5V-15.8V Low heat output, low power consumption Part Number : LD00010-WH

Part Number : 71227

LED Bulb - 12V LED Bulb - 12V

2 High Power Cool White LEDs per “bulb” 6 Cool White LEDs on each “bulb” 12V , ~0.5A 42mm Festoon 42mm Festoon Part Number : 02165 Part Number : LD00008-WH

LED Bulb - 12V LED Switch Panel Lights

2 Cool White LEDs per “bulb” Part Numbers : 42mm Festoon 31386 - LED Bulb, green, Wide angle of 160° multi use 10-28V DC

Part Number : LD00020 31387 - LED Bulb, red, multi use 10-28V DC

279 Lights - Interior Lights LED Lacquered Brass Brass LED Reading Light with Reading Light Frosted Glass

12V LED Bulb Voltage: 8-30 VDC 1-1/2” x 4-1/2”H LED type: 1 x 3w warm white On/Off Switch Lamp Can Be Rotated Dimension: 65mm (base diameter) x 153mm (tall when straight out) Part Number : 00922-BLD Effective Lumen: 140LM

Flush Mount Ball Eye LED Part Number : 00926-BLD

Made of chromed plastic. 1W High Power White LED 9-30 Volt DC LED Mini Reading Light

115mm x 70mm Voltage: 8-30 VDC (requires 35mm behind) LED type: 1 x 3w warm white

Part Number : 01190-WH Dimension: 54mm (base diameter) x 112mm (tall when straight out) Effective Lumen: 140LM Ball Eye LED Light Part Numbers : Zinc Alloy with PC Lens, 00821-BL (Brass) 1 x 1W White LED, 12V 00821-SS (Stainless Steel) Swivel lens 78mm OD Beam Angle: 110° Warm White 2850-3200K LED Recess Light - Warm White

Part Number : 00230-WH 12 Volt Available with a built-in switch or as a standard flush light. 9 X 0.2 watt LED bulbs producing a warm white light. Oval LED “push on/off” light Dimensions: 76mm Overall Diameter 12 Volt Requires 20mm recess into panel Flush or Surface Mount Press to turn ON/OFF Part Numbers : 8 white LEDS 00149-CPD (with switch) 119mm x 100mm 00149-WSCPD(without switch)

Part Number : 00065-WHD

LED Surface Mount “push on/off” Slim SS LED Dome Light - 16 or 28 LEDs

12 Volt DC , 1.15W 28 or 16 White Top LEDs 16 White LEDs Dia: 132mm, Press to turn ON/OFF Thickness: 11mm Dia: 110mm 12 Volt DC , 2.26W Beam Angle: 30° Beam Angle: 120° Daylight White 6000K Daylight White 6000K

Part Number : 00165-WH Part Numbers : 00601-WH - 16 LEDs 00602-WH - 28 LEDs

280 Lights - Interior Lights LED SS LED Dome Lights - 12 Volt Euro LED Touch Lamp - Hella

Classic look with a modern twist. Multivolt 9 - 33 Volt DC, Marine Grade Stainless Steel Less than 4W On / Off switch Touch Sensitive Switching LED Q’TY: 5mm x 20 Touch the white pad to turn the LED Life Time: 50000hrs lamp ON, the black pad to turn Beam Angle: 120° the lamp OFF. Cool White CE & RoHS Approved Waterproof, impact and shock resistant for an ultra long service life. Part Numbers : 00532-SLD (3” Dome Light, 1.35Watt , 111mm OD) Part Number : 2JA959950-521 00532-BRASS (3” Dome Light, 1.35Watt , 111mm OD - Brass) 00541-SLD (4” Dome Light, 1.7Watt , 140mm OD) 00550-SLD (5” Dome Light, 1.7Watt , 168mm OD) LED Dome Light with Dimmer 00532-SLD-BP (3” Dome Light, 1.35Watt , 111mm OD Blister) Touch sensitive switching and dimming technology. Hold your finger on the pad for more than two seconds to cycle through SS 5”LED Dome Light - 12 Volt four dimming levels. Includes red light setting for New model with Warm LED light. night travelling. On / Off switch 8-30 DC Volt, LED Q’TY: 1 x 3W Warm White LED Powerful 3W High Power LED Life Time: 50000hrs White LED Beam Angle: 110° + 10 x 0.5W Red LEDs Warm White 128mm diameter x 25mm CE & RoHS Approved Part Number : 00600-WS Part Number : 00554-WH Surface Mount LED Light

LED Dome Light 12 Volt DC , 0.22W 3 x white LEDs 8-30 DC Volt, Toggle switch Powerful 3W High Power Round - Dia: 90mm White LED Beam Angle: 30° 128mm diameter x 25mm Daylight White 6300K

Part Number : 00600 Part Number : 00168-WH LED light - flush mount - Ø77mm

LED Dome Light , 91 LEDs - 24V Designed for flush mounting but includes packer which can be used for surface mounting. * 91 White LEDs * 24 Volt Rim Made of Plastic with an * ON / OFF / DOOR Switch Aluminium Chassis * Low power consumption * Long life-cycle 1 x 3W LED Warm White Voltage: 8-30 Volt DC Chrome Surround Beam Angle: 110° Waterproof, shockproof, Warm White 2900-3200K vibration proof, rustproof CE & RoHS Certified

143 (diameter) x 38mm Part Number : 00158-WH3W

Part Number : 70676 281 Lights - Chart Lights & Courtesy Lights

LED Chart Light Chrome Cabin Dome Light - LED 8-30 Volt DC On/Off Switch on the side and low power consumption. Aluminium, with Warm White LED light. Touch Sensor Switch all around the housing. Base Diameter: 100mm Height: 30mm Light Housing Dia: 40mm Base Dia: 50mm Part Number : 00520-CPD Length: 490mm

Part Number : 00321-WH

LED Light Rail - White

12 Volt , 0.3W LED Courtesy Light Plastic, 4 x White LEDs Tube can rotate 180° 1 x 5mm White LED 173 (l) x 30 (w) x 30mm (h) 45mm x 32mm Beam Angle: 40º Colout Temp: Daylight White 17671K Chrome Plates Plastic, Partly recessed light fitting

Part Number : 00171-LED Part Number : 00189-LED

Flexible LED Chart Light

1 x White LED Aluminium tube 420mm. Cigarette lighter style Plug with switch

Part Number : 00228-WH

Flush Mount Strip Light

140mm x 28mm 6 x White LED bulbs Lighter Socket with Chart Light 12 Volt DC , 0.43W Cigarette lighter style socket with Chart Light. Beam Angle: 30° Daylight White 6000K Part Number : 3119 Part Number : 00183-LED

282 Lights - Interior Lights - Fluorescent & LED

Fluorescent Light - Single Tube Fluorescent Light - Dual Tube

1 x 8w Tube 2 x 8w Tubes 12 Volt 12 Volt White Plastic White Plastic 410mm (L) x 65mm (W) x 35mm (H) 410mm (L) x 95mm (W) x 35mm (H)

Part Number : 01811 Part Number : 01812

LED Fluorescent Light - 32 x 0.5W LED LED Fluorescent Light 12 x 0.4w LED

Exceptionally bright will illuminate larger cabins. A great Our biggest selling fluorescent type LED lamp. A great economical replacement for traditional fluorescent type fittings. replacement for smaller fluorescent type lights in cabin and saloon. Has a switch so can be turned on and off. Complete with On - Off switch.

32 x 0.5W LED Material: ABS, ABS Shade LED Lifetime: 50000hrs LED Type: SMD Warm White LED Beam Angle: 140º LED’s - 12 x 0.4w Colour Temperature: 2850-3200K LED Lifetime: 50000hrs Effective Lumen: 430LM Color Temperature: 2700-3200K Effective Wattage: 6.4W Effective Lumen: 142LM Voltage: 10-30 Volt DC Voltage:12-24 Volt DC Splashproof Dimensions: 330 x 70mm Dimensions: 401 x 78mm Part Number : 01803 Part Number : 01804-S

283 Lights - Solar Lights

Sealite SL70 2-3nm Solar Marine Light

The Sealite SL70 2-3 mile compact LED light is the most advanced and versatile compact light on the market. The dual solar module unit is designed for low-medium sunlight conditions and has proven it’s reliability in regions such as Britain, Belgium and North America. Users are continually pleased at the ease of battery replacement.

Features: * Dual high-performance solar modules for reliable operation in low sunlight conditions * 6 ultra-high intensity LEDs * 8Ah NiMH battery pack * 256 IALA flash patterns, user-adjustable without the need for external devices * Bird-deterrent spike

Advantages: * Award-winning lens design * User-replaceable battery in sealed battery compartment * IP68 waterproof * Product life expectancy of up to 12 years

Available in 5 colours: Red, Green, White, Yellow, Blue

Part Number : SL70

Sealite SL60 2-3nm Solar Marine Light

The Sealite SL60 2-3 mile solar-powered LED light is maintenance-free and has a service life of over 5 years, extended through easy battery replacement. The unit is ideal for navigation, hazard lighting, aquaculture, perimeter lighting and a range of other applications. It can be installed in minutes and requires no operator intervention. The flash-characteristics are easily adjusted on-site by the user and the lantern has a permanent ON/OFF switch for easy storage.

Features: * 256 IALA flash patterns, user-adjustable without the need for external devices * 6 ultra-high intensity LED’s * User-replaceable battery in sealed battery compartment * 4 user adjustable intensity settings * ON/OFF storage switch * Bird deterrent spike

Advantages: * Installs in minutes and operates maintenance-free for up to 5 years * IP68 waterproof * Product life expectancy of up to 12 years

Available in 5 colours : Red, Green, White, Yellow, Blue

Options available with SL60 50mm adaptor plate or 200mm OD base

Part Number : SL60

284 Lights - Solar Lights

Sealite SL15 1-2nm Solar Marine Light

The SL15 1-2 mile compact LED light is exceptional value and incorporates some of the most advanced technology available.

In the tradition of Sealite lanterns, the SL15 is designed to be maintenance-free and have a service life of over 5 years. This makes the unit ideal for hazard marking, aquaculture, navigation, perimeter lighting and a range of other applications.

During daylight hours, the solar module will charge the battery and the lantern will automatically begin operation at dusk - once the ambient light threshold drops sufficiently.

Features: * 15 IALA recommended flash settings including steady-on (custom characteristics available on request) * 4 ultra-high intensity LEDs * User-replaceable battery in sealed battery compartment * Large 0.45watt internal solar module * Bird-deterrent spike

Advantages: * Completely sealed and self-contained using ultrasonic welding techniques * Installs in minutes and operates maintenance free for up to five years * IP68 waterproof * Product life expectancy of up to 12 years

Available in 5 colours: Red, Green, White, Yellow and Blue

Flash set at .3 second on, 2.7 seconds off.

Part Number : SL15 Solar Powered LED Marker Light

Solar Powered LED Marker Lights provide night illumination to buoys, aquaculture, docks, moorings, or anything else benefiting from night time identification. LED warning lights charge in the sunlight and automatically switch on at dusk alerting boaties of hazards. Units are constructed with clear lens and tough, waterproof, plastic housing to keep light in working repair.

Features: *One (1) nautical mile visibility *White LED light *Three operating modes: steady on, slow flash (15x / minute), & fast flash (60x / minute) *Attaches easily to any flat surface with 2 (two) 1/4” screws *Base diameter is 120mm

Part Number: LED-1030 Solar Dock Light

Solar Dock Light illuminates with 360º bright 4 white LED light. The dock light can be mounted to any flat surface.

Part Number : LED-1034

285 Lights - Underwater Lights

Underwater Light - Surface Mount LED

Made of Stainless Steel 316, with 4 x 3W LEDs either Blue or Green ( 00299-BG has 2 x 3W Blue LEDs & 2 x 3W Green LEDs) 1.5M Wires, 95mm(Dia.), 20mm (Thickness).

Operating Voltage: 8-30 Volt DC Beam Angle: 110º

Quick and Simple to Fit, Should be placed on the transom at the lowest possible location about 3” above the bottom of the boat, make sure the inside of the transom is clear.

Part Number : 00299-B ( 4 x Blue LED Bulbs )

Waterproof High Intensity LED Underwater Lights

These High-Intensity LED Underwater Lights are totally waterproof and designed to be used above or below the water line. A broad flood light effect is created by the engineered optics of the convex light face. Compared to other LED models on the market, this 180 Lumen light has greater light output and a wider aperture.

* Surface Mount or Small Hole for Wiring * 6 Super Bright LED’s (180 Lumens) * 100,000 hour life * No high heat like most other underwater lights * Can be used on Trim-Tabs * Stainless Steel hardware Included

Dimensions: Surface size: 90mm (l) x 38mm (w) x 30mm (h)

Part Numbers : LED-1000 (Submersible White LED Light) LED-1002 (Submersible Blue LED Light)

Waterproof LED Strip Lights

These surface mount LED Utility Strip Lights are great for lighting or decorating interior and exterior of boats, RVs and other vehicles. Being 100% waterproof, they can be used virtually anywhere.

*Submersible - 100% waterproof *Circuit board completely sealed in epoxy to resist water, corrosion and vibration *Surface Mounting for Easy Installation *Low Amp Draw For Longer Battery Life *Clear Lens Provides Maximum Light *Three Lengths (4”, 6”, and 8”) cover any application

Part Numbers : LED-1020 (Slimline Submersible Strip 6 x LED Light) LED-1022 (Slimline Submersible Strip 12 x LED Light)

286

Pumps & Plumbing

Bailer - Flexible Sockets 289. Maxflo Collapsible Fabric Bucket 300. Valves & Pipe Plugs Pressure Pumps Hand Bilge Pump 15GPM (57LPM) Fittings Vented Loop 25mm Stainless Steel Pressure Pump - 35PSI - 13 L/Min Hand Pump - 12GPM (45LPM) Electronic Aquavalve - 3 way Valve Pressure Pump - 40PSI - 17 L/Min Hand Bilge Pump 12GPM (45LPM) Aquavalve - 3 way Y Valve Pressure Pump - 60PSI - 20 L/Min Hand Pump 25GPM - Under Deck Aquavalve Hosetails 307. Water Pressure Pump - 40PSI - 17 L/Min Manual Hand Bilge Pump 3 Way Y Valve Strainers - 220V AC Ball Valves Salt Water Strainer Pressure Pump with Accumulator Aquavalve Elbows - 120 or 90 In-line Strainer - 3/4” Hose Tail 296. Toilets degree TMC Electric Toilet Superior In-line Strainer - 1/2” Hose Tail Non Return Valve TMC Deluxe Electric Toilet Bronze Intake Strainer - Oval 290. Other Pumps Non Return valve Cooling Water Strainer Shurflo Water Pressure Pump 13L/ TMC Electric Toilet 12v - Standard Nylon Non Return Valve In-line Strainer - 15mm Thread min TMC Manual Toilet - New Euro Scoop Strainers: Plastic & Bronze Shurflo Water Pressure Pump Model Bronze Intake Strainer - Removable 11.3L/min MaXtek Portable Chemical Toilet 301. Skin Fittings , Shurflo Water Pressure Pump 6L/ MaXtek Waste Tank for Portable min Toilet Hosetails , Portable 12V Washdown Pump MaXtek Camping Toilet Frame 308. Shower TMC Water Circulation Pump- 25 Porta Pottie Excellence - White T-Pieces Skin Fittings - Hose Tails Components L/min Porta Pottie Qube 365 - Ruby Skin fitting with 90 degree elbow Shower Kits TMC Bronze Impeller Circulation Male Hose Tails Water Accumulator Pump- 25 L/min Hose Tail Elbow Shower Box with Cap Wash Down Coil Hose Kit 298. Toilet Parts Hose Tail Side-mount Housing with Door TMC Toilet Electric Flush Control T-Piece Outside Shower Unit TMC Manual Euro Toilet Pump Skin Fittings - Mushroom Shower Sump System LSU600 292. Electric Bilge TMC Toilet Pump Skin Fitting - Hosetail Shower Mixer Razor Kit for TMC Electric Toilets Female T-Piece Small Shower Box with Mixer Pumps TMC Toilet Seat Standard - with Bronze Tailpieces / Elbow Hosetails Shower Box with Cap - Round Hinges Shower Nozzle with Hose AML Bilge Pump - 3000 gph TMC Repair Kit for Manual Toilets Shower Nozzles AML Bilge Pump - 2000 gph TMC Toilet Waste Pump Toilet Roll Holder AML Bilge Pump - 1500 gph In-Line Macerator Pumps 302. Tru Design Cockpit Drain with grill AML Bilge Pump - 1000 gph TMC Toilet Part No.6 Seat Hinge Drain Sleeve AML Bilge Pump - 500 gph Support Fittings Tru Design Ball Valves Solar Shower Battery Aquapump TMC Toilet Part No.12 Joint Tru Design Hose Tail Elbows Shower Nozzle Holder TMC Bilge Pump - 3000 gph Packing Tru Design Hose Tails with Long Wall Attachment for Shower TMC Bilge Pump - 2000 gph TMC Toilet Part No.15 Elbow Thread Cockpit Drain 90 Degree Elbow TMC Bilge Pump - 1000 gph TMC Toilet Part No.18 Centrifugal Tru Design Female Thread Elbows Outboard Well Drains TMC Bilge Pump - 1000 gph Impeller with Hose Tails TMC Bilge Pump - 500 gph TMC Toilet Part No.19 Macerator Tru Design Male Thread Elbows TMC Handy Pump - 1000GPH Housing with Hose Tails TMC Auto Bilge Pump - 1500 gph TMC Toilet Part No.20 & 20-1 310. Heaters & Tru Design Hose Connectors TMC Auto Bilge Pump - 500 gph Chopper Blade Set Lalizas Bilge Pump - 1000 gph Tru Design Hose Reducers Water Tanks TMC Toilet Part No.21 Gasket Eberspacher Airtronic D2 Diesel Lalizas Bilge Pump - 700 gph Tru Design Y Pieces TMC Toilet Part No.22 Base Heater Lalizas Bilge Pump - 600 gph Tru Design Skin Fittings - Full TMC Toilet Part No.23 Flapper Eberspacher Airtronic D4 Diesel Lalizas Bilge Pump - 500 gph Thread Valve Heater Lalizas Auto Bilge Pump - 600 gph Tru Design Skin Fittings - Hose Tail TMC Toilet Part No.24 Discharge Eberspacher Hydronic D5WSC MaXtek Bilge Pump Switch Tru Design Skin Fittings - Recessed Port Water Heater Sure Bail Float Switch Tru Design Vented Loops TMC Toilet Part No.25 Adaptor Force 10 Water Heaters Automatic Float Switch - Lalizas TMC Toilet Part No.27 Body (Pump) LALIZAS Water Tanks TMC Toilet Part No.28 Gasket Water Tank - Folds Flat - 19 litre TMC Toilet Part No.29 - Impeller 306. Pipe Fittings Motorhome Waste dump kits 295. Manual Bilge Flexible Elbows - Female to Female WAM Female Pipeline Camlock TMC Toilet Part No.44 Base Nipples with Hose Tail Pumps & Bailers Packing Gasket Reducing Bushes Plastimo Manual Bilge Pump 925 WAM Male Pipeline Camlock Elbows - Male to Female Bailer - 2.5 litre, Orange Compact RV Washing Machine TMC Toilet Part No.64 Elbow Reducing Nipples Bailer - 2.0 litre Flexible 288 Plumbing - MaXflo Pressure Pumps

These new generation pumps guarantee quiet operation and smooth performance while providing the ultimate in durability and reliability. Designed and built specifically for the harsh marine environment but are suitable for a multitude of applications.

* Motorhome and Boat water systems with showers and galley outlets * Powerful Deck and Wash-down systems * Designed for both Fresh Water and Salt water Applications. * 2 Year Warranty Pressure Pump - 35PSI - 13 L/Min Pressure Pump - 40PSI - 17 L/Min

Designed for Fresh Water Designed for Fresh Water and Salt water Applications. and Salt water Applications. Automatic Start/Stop when taps are turned on and off. Automatic Start/Stop when taps are turned on and off. Specifications: Max Pressure - 40psi Specifications: Open Flow Rate - 17 l/Min Max Pressure - 35psi Thermal Cut-out Open Flow Rate - 13 l/Min Inlet /Outlet:1/2” (12mm) Thermal Cut-out Self priming height - 3m Inlet /Outlet:1/2” (12mm) Water strainer - Included Self priming height - 3m Water strainer - Included Dimensions: (L) 247mm x (W) 100mm (WOA) Including filter & hosetail connections: 185mm Dimensions: (L) 200mm x (W) 100mm (WOA) Including filter & hosetail connections: 185mm Part Numbers : NS40 (12V) NS42 (24V) Part Numbers : NS35 (12V) NS36 (24V)

Pressure Pump - 60PSI - 20 L/Min

Designed for both Fresh Water & Salt water Applications. Automatic Start/Stop when taps are turned on and off.

2 Year Warranty Specifications Voltage: 12 Volt Current: 17A Pressure:60psi Flow: 20L.Min Overload Protection - Thermal Cut-out Inlet Outlet Dia - 1/2” (12mm) Self priming height - 3m Run dry without damage Duty Cycle: Intermittent (Under different pressure, the continuously working time will also be different) Fluid temperature: 95C Water strainer - Included Weight - 2.8kg Dimensions: (L) 260mm x (W) 150mm

Part Number : NS44 289 Plumbing - Pressure Pumps

Pressure Pump - 40PSI - 17 L/Min - Shurflo Water Pressure Pump 13L/min

220V AC Designed for Fresh Water and Salt water Applications. Automatic Start/Stop when taps are turned on and off. Designed for Fresh Water and Salt water Applications. Designed for all applications. 3 Chamber Pump. 1 Year Warranty. Automatic Start/Stop when taps are turned on and off. Specifications: Specifications: Built-in pressure switch Max Pressure - 40psi Max Pressure - 45psi Open Flow Rate - 17 l/Min Open Flow Rate - 13 l/Min Thermal Cut-out Thermal Cut-out Inlet /Outlet:1/2” (12mm) Inlet /Outlet:1/2” (12mm) Self priming height - 3m 12V Voltage: 230 Volt AC Water strainer - Included Part Number : 6662

Dimensions: (L) 290mm x (W) 100mm Shurflo Water Pressure Pump 11.3L/min (WOA) Including filter & hosetail connections: 185mm Designed for Fresh Water and Salt water Applications. Part Number : NS43 Automatic Start/Stop when taps are turned on and off. Designed for all applications. 3 Chamber Pump. 1 Year Warranty.

Pressure Pump with Accumulator Specifications: Built-in pressure switch FDA materials in pump and Max Pressure - 45psi accumulator tank for fresh Open Flow Rate - 11.3 l/Min drinking water. Thermal Cut-out Inlet /Outlet:1/2” (12mm) May be mounted vertically 12V or horizontally for easy installation. Part Number : 6665

12 Volts DC Self-priming up to 6ft (2m). Shurflo Water Pressure Pump 6L/min

Overall Dimensions: 500 x 350 X 385mm(h) Designed for Fresh Water and Salt water Applications. Accumulator tank volume: 2.1 gallon (8.0 litre). Automatic Start/Stop when taps are turned on and off. Max Pressure - 35psi Open Flow Rate - 13 l/Min Designed for all applications. 3 Chamber Pump. 1 Year Warranty. Water strainer - Included Specifications: Part Number : NS35KIT Built-in pressure switch Max Pressure - 30psi Open Flow Rate - 6 l/Min Thermal Cut-out Inlet /Outlet:1/2” (12mm) 12V

Part Number : 6664

Portable 12V Washdown Pump

The pack includes: 12 Volt Pump unit with inlet hose and power supply lead, Adjustable spray gun, Delivery hose. All this in a rugged carry case weighing only 6kg.

Part Number : NS100

290 Plumbing - Pumps

TMC Water Circulation Pump- 25 L/min

Heavy duty, continuously rated impeller pump suitable for high volume salt and fresh water transfers.

Flow: 25 L/Min - 400 GPH (1512 LPH) Inlet and outlet size: 1” / 25mm hose tails Voltage:12V Current Draw: 8Amps Head: 4m Priming head(Lift): 1.5m Rating: Continuous

Dimensions: 98(h) x 128(w) x 172(d)

Part Number : 6666

TMC Bronze Impeller Circulation Pump- 25 L/min

Heavy duty, continuously rated bronze housed impeller pump suitable for high volume salt and fresh water transfers.

Flow: 25 L/Min - 400 GPH (1512 LPH) Inlet and outlet size: 13mm female thread and 19mm male thread Voltage:12V or 24V Current Draw: 8Amps Head: 4m Priming head(Lift): 1.5m Rating: Continuous

Dimensions: 98(h) x 130(w) x 170(d)

Part Numbers : 6667 - 24V 6668 - 12V Wash Down Coil Hose Kit

25ft coiled hose with snap on plastic garden type hose fittings and adjustable spray nozzle.

Spray Nozzle is easily adjustable with settings such as soak, shower, jet, Cone and Mist.

* Self-coiling design is easy to use, extremely flexible, lightweight, and compact.

* The hose retains and memory of its coiled shape which makes it easy to stow.

* Constructed of UV resistant polyurethane that is far more durable than standard rubber and PVC hoses.

* Will not kink or tangle.

* Drinking water safe.

Part Number : NS60

291 Plumbing - Absolute Marine Electric Bilge Pumps

Absolute Marine Bilge Pumps

These pumps are CE rated and manufactured to ISO 9001 standard Detachable base with debri filter facilitates installation. Screw the base down and the pump snaps into place. Strainer is easily cleaned with quick release tabs. Twin mechanical seal system ensures long life. Internal metal components are 304 stainless steel.

AML Bilge Pump - 3000 gph AML Bilge Pump - 2000 gph

3000 gph = 11,356 l/hr 2000 gph = 7,570 l/hr 12 Volt or 24 Volt 12 Volt or 24 Volt

1 1/4” Outlet (32mm) 1 1/8” Outlet (28mm) Delivery Head: 4m Delivery Head: 4m 2 year warranty 2 year warranty

Dimensions: Dimensions: Base Dia - 132mm Base Dia - 118mm Height - 195mm Height - 170mm

Part Numbers : Part Numbers : 6619 (12 Volt) 6614 (12 Volt) 6619-24 (24 Volt) 6614-24 (24 Volt)

AML Bilge Pump - 1500 gph AML Bilge Pump - 1000 gph

1500 GPH = 5676 l/hr 1000 gph = 3,785 l/hr 12 Volt or 24 Volt 12 Volt or 24 Volt

1 1/8” Outlet (28mm) 1 1/8” Outlet (28mm) Delivery Head: 4m Delivery Head: 4m 2 year warranty 2 year warranty

Dimensions: Dimensions: Base Dia - 118mm Base Dia - 88mm Height - 170mm Height - 135mm

Part Numbers : Part Numbers : 6612 (12 Volt) 6607 (12 Volt) 6612-24 (24 Volt) 6607-24 (24 Volt)

AML Bilge Pump - 500 gph Battery Aquapump

500 GPH = 1890 l/hr *Battery operated - Operates where power cannot reach 12 Volt *Long pickup - Can reach into hard to get to areas *Flexible outlet hose - Can pump into bucket or overboard 3/4” Outlet (20mm) Delivery Head: 4m 3VDC – 2 x “D” size batteries 2 year warranty 6 lpm Flow rate

Dimensions: Dimensions Base Dia - 88mm Total length 580mm Height - 135mm Discharge length 600mm Inlet length 370mm Part Number : 6605 Part Number : 03306 292 Plumbing - TMC Electric Bilge Pumps TMC Bilge Pump - 3000 gph TMC Bilge Pump - 1000 gph

3000 gph = 11,356 l/hr 1000 gph = 3785 l/hr 12 Volt or 24 Volt option 12 Volt

1 1/4” Outlet (32mm) 1” Outlet (26.5mm) Delivery Head: 4.6m Delivery head: 4m

Dimensions: Dimensions : Base Dia - 132mm Base Dia - 82mm Height - 195mm Height - 126.7mm

Part Numbers : Part Number : 6606 6620 (12 Volt) 6621 (24 Volt) TMC Bilge Pump - 500 gph TMC Bilge Pump - 2000 gph 500 gph = 1890 l/hr 2000 gph = 7,570 l/hr 12 Volt 12 Volt or 24 Volt option 3/4” Outlet (20mm) 1 1/8” Outlet (28mm) Delivery head: 3m Delivery Head: 4m Dimensions : Dimensions: Base Dia - 73.5mm Base Dia - 118mm Height - 94.5mm Height - 170mm Part Number : 6604 Part Numbers : 6617 (12 Volt) TMC Handy Pump - 1000GPH 6618 (24 Volt) 1000 GPH = 3785 l/hr TMC Bilge Pump - 1000 gph 12 Volt

1000 gph = 3.785 l/hr * Equipped with a handle for portability 12 Volt * Works as a multi-functional pump

1 1/8” Outlet (28mm) Outlet Diameter: Delivery Head: 4m 1-1/8”, 3/4” (26,20mm) Delivery Head: 2.4m Dimensions: Base Dia - 88mm Dimensions: 107 x 88 x 165mm (LxWxH) Height - 135mm Part Number : 03305 Part Number : 6609 TMC Automatic Bilge Pumps

TMC Auto-Eye Series Submersible Pump is equipped with a built-in electronic controlled reed sensor system making it fully automatic. No float switch needed and no power used until pump turns on when water level rises. Auto-Eye Pumps are built with a compact, efficient, long life motor, rust and corrosion protected stainless steel shaft, and high-impact durable plastic housing. TMC Auto Bilge Pump - 1500 gph TMC Auto Bilge Pump - 500 gph

1500 GPH = 5676 l/hr 500 GPH = 1890 l/hr Hose Dia: 1” (26mm) Hose Dia: 3/4” (19mm) Delivery Head: 13FT (2.5M) Delivery Head: 13FT (2.5M) Dimensions: 190 x 108 x 150mm (LxWxH) Dimensions: 136 x 82 x 110mm (LxWxH)

Part Numbers : 31156 (12 Volt) or 31157 (24 Volt) Part Numbers : 31152 (12 Volt) or 31154 (24 Volt) 293 Plumbing - Lalizas Electric Bilge Pumps

Lalizas Bilge Pumps

The Lalizas 12 volt submersible bilge pumps are constructed of shock resistant A.B.S. plastic and powered by the world’s best compact motor. The snap-on strainer base makes installation a simple procedure. Lalizas Bilge Pump - 1000 gph Lalizas Bilge Pump - 700 gph

1000 GPH = 3785 l/hr 700 GPH = 2650 l/hr 12 Volt 12 Volt

1 1/4” Outlet (32mm) 1” Outlet (25mm) Delivery Head: 4m Dimensions: Dimensions: 70mm (base dia) x 95mm (h) 70mm (base diameter) x 95mm (h) Part Number : 30672 Part Number : 30673

Lalizas Bilge Pump - 600 gph Lalizas Bilge Pump - 500 gph

600 gph = 2,271 l/hr 500 GPH = 1890 l/hr 12 Volt 12 Volt

3/4” Outlet (19mm) 3/4” Outlet (19mm)

Dimensions: Dimensions: 60mm (base dia) x 90mm (h) 60mm (base dia) x 90mm (h)

Part Number : 30671 Part Number : 30670 Lalizas Auto Bilge Pump - 600 gph

The Lalizas Submersible Automatic Bilge Pump combines quality and ease of use in one device. It has a built-in automatic float switch that activates the pump when the bilge water rises, thereby allowing the pump to operate even when the boat is unattended.

12 Volt 600 gph = 2,271 l/hr 3/4” Outlet (19mm)

Dimensions: 145mm (l) x 82mm (w) x 90mm (h) Sure Bail Float Switch Part Number : 31150 It turns on at a water level of 44mm and off at 22mm. There is also MaXtek Bilge Pump Switch the facility for a manual over-ride switch.

12V Switch with auto Power: 6V - 30V, Fuse 15A max and manual position for control of an automatic Part Number : SB1-FS bilge pump. 81mm X 62mm Automatic Float Switch - Lalizas Corrosion-free aluminium panel. When water lifts the chamber buoy up 6cm, the switch automatically turns the bilge pump on until the water is dry. Part Numbers : 3206 Power: 12V/ 24V, Fuse: 15A max 3206-BP (Now available in a Blister Pack) Part Number : 91549

294 Plumbing - Manual Bilge Pumps & Bailers Plastimo Manual Bilge Hand Bilge Pump 15GPM (57LPM) Pump 925 Nylon body - 1½” hose Bilge pump with telescopic handle, for 15 GPM = 57 l/min efficient and more comfortable pumping. 160 (w) x 100mm (h) *The Plastimo pump is very compact and body length: 235mm the 90° position of the outlets allows length with handle: 420mm installation where space is limited or access difficult. Part Number : 18515 *Outlets swivel through 360° and therefore adapt perfectly to the pump position in relation to the strainer and thru-hull fitting. Hand Pump - 12GPM (45LPM) Output: 0.9 litre per cycle , Capacity: 40.5 litres/min 1” Outlets: (25 mm) Single diaphram self- priming hand pump Part Numbers : 39539 (without by-pass) 53058 (with by-pass valve) Suitable for salt water, bilge water, waste water and effluent. Manual Hand Bilge Pump 720GPH (2724 L/H) * Floats Outlets: 1-1/4” (33mm) * Great for kayaks Dimension: (LxWxH) (272.5x140x140mm) * Compact design * Fast pumping - 30L/Min Part Number : 71601 * Soft grip handle * Complete with storage bag Hand Bilge Pump 12GPM (45LPM) Dimensions 392 (l) x 102 (w) - Overall Nylon body & handle Suits 1” hose. Outlet hose: 32mm dia Dimension: (LxWxH) Hose length: 330mm (280x155x70mm) Base dia: 49mm Part Number : 18510 Part Number : 157001 Hand Pump 25GPM - Under Deck Bailer - 2.5 litre, Orange Single diaphram self-priming hand pump. Dimensions: 158mm x 128mm x 215mm Designed for mounting under floorboards.

Part Number : 11919 Suitable for salt water, bilge water, waste water and effluent.

25GPM = 95 l/min Bailer - 2.0 litre Flexible Outlets: 1-1/2” (40mm) Dimension: (LxWxH) 200x195x160mm 130mm x 245mm Part Number : 18512 Part Number : 11920

Bailer - Flexible Collapsible Fabric Bucket

130mm x 195mm Reinforced PVC Capacity: 10 Litres Part Number : 4249 Part Number : 99203

295 Plumbing - TMC Toilets

TMC Electric Toilet Superior

Luxury Electric Marine Toilets with home type bowl

This toilet has a fully skirted base, a large bowl, is Lectra/san compatible and comes with a bulkhead mounting toggle switch. It also had a built-in macerator, motor and pump.

Dimensions (LxWxH): 480 x 383 x 460 mm Fitting: 3/4 inch (20mm) ID inlet hose, 1 inch (25.5mm) ID discharge hose

Part Numbers : 8311 (12 Volt) or 8312 (24 Volt)

TMC Deluxe Electric Toilet

A more comfortable, larger bowled version of the standard electric toilet.

This toilet has a plastic seat, a large bowl, is Lectra/san compatible and comes with a bulkhead mounting toggle switch. It also has a built-in macerator, motor and pump.

* Large attractive china bowl * Inlet and outlet size: 25mm

Dimensions (LxWxH): 484 x 365 x 376 mm

Part Numbers : 8514 (12 Volt) or 8515 (24 Volt)

TMC Electric Toilet 12v - Standard

This toilet has a plastic seat, a small bowl, is Lectra/san compatible and comes with a bulkhead mounting toggle switch. It also has a built-in macerator, motor and pump.

* Electric Marine Toilet with small bowl * Standard plastic seat and cover Switch Box included.

Dimensions (LxWxH): 445 x 360 x 352 mm

Part Numbers : 8305 (12 Volt) or 8306 (24 Volt)

TMC Manual Toilet - New Euro Model

Manual marine toilet with small bowl and standard plastic seat and cover. New angled hand pump design for easy pumping.

Bowl is made of high quality ceramic. Base, pump and seat is constructed of non- corrosive Marine Plastic. Fitting: Connection for 3/4” (19.5mm)ID inlet hose. 1-1/2” (37.8mm) ID discharge hose. Dimensions: LxWxH 16.73x18.11x13.6 inches (425x460x345mm)

Part Number : 8303

296 Plumbing - Portable Toilets

MaXtek Portable Chemical Toilet

This portable toilet is ideal as a camping toilet or on the boat and is suitable for interior and exterior use. Self-contained with no external water or power connections required. Fresh water capacity: 12lt (provides up to 50 flushes) Waste capacity: 10 litre or 20 litre

Dimension: 355mm (W) x 410mm (D) x 420mm (H)

* The double sealed drain valve protects against leakages and odours * Heavy duty, corrosion resistant side latches lock the tanks together * Both waste and fresh water tanks are one-piece construction. * The waste holding tank can be easily emptied, without using any tools

Part Numbers : 11867 (10 litre waste) 11867-20 (20 litre waste)

MaXtek Waste Tank MaXtek Camping Toilet Frame for Portable Toilet This toilet frame elevates the portable toilet 125mm. A 20 litre waste holding tank for the portable toilets. Ideal when used as a camping toilet.

Part Number : 11869 Part Number : 11870

Porta Pottie Excellence - White

For those who seek luxury and high-quality during leisure time, or looking for a solution at home during renovations or simply as a second toilet. Why not consider this jewel amongst portable toilets? * Integrated toilet paper holder * Flush-water level indicator * Cover controls (for piston pump, water fill cap, water level indication) * Water fill adaptor * Improved carry handle of the water tank * Including free 150 ml Aqua Kem Green + 150 ml Aqua Rinse

Waste tank capacity: 21L Flush water tank capacity: 15L Toilet weight: manual version: 5.5 Kg Dimensions: 448 x 388 x 450 mm (H x W x D

Part Number : 5006

Porta Pottie Qube 365 - Ruby

The Porta Potti Qube 365 is a family size portable toilet with a high capacity waste holding tank and a natural seating height. * Manual flush, piston pump * Integrated pour-out spout * Integrated cover-lock on all models * Including free 150 ml Aqua Kem Green + 150 ml Aqua Rinse

Waste tank capacity: 21L Flush water tank capacity: 15L Toilet weight: 4.0 Kg Dimensions: 414 x 383 x 427 mm

Part Number : 5005

297 Plumbing - Toilets Parts & Accessories

TMC Toilet Electric Flush Control

TMC Electric Toilet Flush Controller includes one box of 6 spare fuses. This controller utilises a built-in micro IC control system to allow two flush options; a half flush lasting 5 seconds to deliver 2 litres of water, and a full flush lasting 10 seconds to deliver 4 litres of water.

This easy to use one-touch controller panel is water resistant. This controller panel is design to be an extra level of protection for your electric toilet against current spikes. TMC Manual Euro Toilet Pump This controller is for 12VDC System. Complete Assembly for 99901 99903 Part Number : 8307 TMC Toilets

TMC Toilet Pump Part Number : 8304

This is a complete replacement pump unit for TMC electric toilets.

Four bolts plus the power cable is all that is involved in changing a pump Razor Kit for TMC over. Electric Toilets Part Numbers : 8309A (12 Volt) or 8308A (24 Volt) Part Number : ET3626

TMC Toilet Seat Standard - with Hinges TMC Repair Kit for Standard Seat/Cover for TMC Marine Toilet Models 99901, 99902, 99905 and 99909. Manual Toilets Round shape made from marine plastic that is break and stain resistant. Part Number :8315 Comes with hinges, screws and washers.

Part Number : 8323 In-Line Macerator Pumps

TMC Toilet Waste Pump *Used in line for emptying holding tanks. Single Diaphram Pump designed to handle unmacerated toilet *Self priming waste / black water. *Runs dry without Damage * Self priming *Thermal overload * Runs dry without automatic restart damage *Dual blade design * No filter required. *Ignition protected * Can pump a mix of *Impeller design and including O-ring sealed end bells air and water. *Pump grinds waste into small particles for easy disposal

* Adjustable clamping ring allows the head assembly to be Part Number : rotated 360º to accommodate plumbing. NS65 (12 Volt)

12 Volt, 7 Amp TMC Branded Macerator Pumps (Same Spec as above): Capacity: 20LPM, Delivery Head: 65ft (20m) 8499 (12 Volt) Hose Diameter: 1-1/2” (38mm) 8500 (24 Volt)

Part Numbers : 0620921 (12V) 0620922 (24V) 298 Plumbing - TMC Toilets Parts

TMC Toilet Part No.6 Seat Hinge TMC Toilet Part No.23 Flapper Valve

Support Part Number : 8345

Standard Seat/Cover Hinges for TMC Marine Toilet Models 99901, 99902, 99905 and 99909. TMC Toilet Part No.24 Discharge Port Part Number : 8346 Part Number : 8321 TMC Toilet Part No.12 Joint Packing

Part Number : 8328

TMC Toilet Part No.25 Adaptor

Part Number : 8354 TMC Toilet Part No.15 Elbow

Part Number : 8331

TMC Toilet Part No.27 Body (Pump) TMC Toilet Part No.18 Centrifugal Part Number : 8387 Impeller

Part Number : 8317

TMC Toilet Part No.19 Macerator TMC Toilet Part No.28 Gasket Housing Part Number : 8322 Part Number : 8316

TMC Toilet Part No.20 & 20-1 Chopper TMC Toilet Part No.29 - Impeller Blade Set Flexible Part Number : 8333 Part Number : 8313 TMC Toilet Part No.21 Gasket

Part Number : 8342 TMC Toilet Part No.44 Base Packing Gasket

Part Number : 8395 TMC Toilet Part No.22 Base

Base unit for TMC Standard Electric Marine Toilet’s 99902 and 99904. TMC Toilet Part No.64 Elbow

Part Number : 8340 Part Number : 8385

299 Plumbing - Valves & Pipe Fittings

Electronic Aquavalve - 3 way Valve

The indicators on the control panel show the current position of the valve. The valve has two positions ‘holding tank’ or ‘overboard’.

Part Numbers : 1378A (12 Volt) or 1378B (24 Volt)

Aquavalve - 3 way Y Valve

The Aquavalve® has been designed as a two way diverting Marine Valve to divert treated or untreated sewage into a holding tank or treatment system.

This valve can handle hot or cold water, as well as waste treatment chemicals.

Part Numbers : 90314 - Standard (Hose tails sold separately) 90313 - Through Bulkhead Aquavalve Elbows - Aquavalve Hosetails 120 º or 90º Designed to complement the Aquavalve range. Aquavalve Elbows are Manufactured from glass available with an exit angle of reinforced nylon composite for high either 120º or 90º. strength and durability. Manufactured from glass Part Numbers : reinforced nylon composite for 90251 - Tail 19mm 1-1/2” BSP White strength and durability.. 90262 - Tail 25mm 1-1/2” BSP White 90283 - Tail 32mm 1-1/2” BSP White Part Numbers : 90294 - Tail 38mm 1-1/2” BSP White 90299 - Aquavalve 90° Bend 38mm 1-1/2” BSP White 90298 - Aquavalve 120° Elbow 38mm 1-1/2” BSP White 90259 - Aquavalve 90° Bend 25mm 1-1/2” BSP White 90258 - Aquavalve 120° Elbow 25mm 1-1/2” BSP White 3 Way Y Valve Non Return Valve Made of strong Nylon Bulkhead Mounting Designed to permit fluid flow in For 25mm or 40mm Hose one direction only.

Part Numbers : Part Numbers : 18600-01 - 25mm 6417 - 20mm 18600-02 - 40mm 6418 - 25mm 6416 - 32mm 6419 - 40mm 6401 - 50mm Ball Valves Non Return valve Compact, may be used for throttling as well as an ON/OFF valve. Part Numbers : Sizes from 15 to 50mm 31345 - 3/4 or 1” outlet 31348 - 1½” or 1¼” outlet Part Numbers : 6410 - 15mm 6411 - 20mm 6412 - 25mm Nylon Non Return Valve 6413 - 32mm 6414 - 40mm To Suit 25mm or 38mm Hose Pipe 6415 - 50mm Part Number : 11581 300 Plumbing - Skin Fittings , Hosetails , T-Pieces

Skin Fittings - Hose Tails Skin Fittings - Below Water Applications

Used for above waterline applications. Full thread, mushroom type skin fittings The size refers to the Used for below water line applications. hoses’ inside diameter. The thread is BSP.

Part Numbers : Part Numbers : 6703 - 15mm White 6719 - 20mm 6705 - 20mm White 6720 - 25mm 6705B - 20mm Black 6721 - 32mm 6706 - 25mm White 6722 - 40mm 6706B - 25mm Black 6723 - 50mm 6707 - 32mm White 6707B - 32mm Black 6708 - 40mm White 6708B - 40mm Black 6710 - 50mm White

Skin fitting with 90 degree elbow Skin Fitting - Hosetail

Used for above Used for above waterline waterline applications. applications The size refers to the hoses inside diameter. Part Numbers : 6708N - 40mm Part Numbers : 6707N - 30mm 6485 - 20mm 6486 - 25mm 6487 - 38mm

Male Hose Tails Female T-Piece

Part Numbers : Used to tee off three male threads. 6503 - 1/2” x 1/2” 6504 - 1/2” x 5/8” Part Numbers : 6506 - 15mm 6462 - 15mm 6507 - 20mm 6463 - 20mm 6508 - 25mm 6464 - 25mm 6509 -32mm 6465 - 32mm 6512 - 40mm (Polymer) 6466 - 40mm 6512H - 40mm (Hansen) 6467 - 50mm 6510 - 50mm

Hose Tail Elbow Bronze Tailpieces / Elbow Hosetails 90º Bend 20mm Hose I.D. Part Numbers : 41531 - 3/4” x 1” Part Number : 6460 41533 - 1” x 1-1/4”

Hose Tail T-Piece

Suits 1/2” pipes

Part Number : 6500 301 Plumbing - Tru Design Valves & Pipe Fittings

Tru Design Ball Valves

Tru Design Ball Valves are designed and made in New Zealand for use in marine applications above and below the water line. They are IMCI approved to ISO standard 9093-2 and are ideal for controlling inlet and outlet water requirements.

The bodies of these valves are moulded in a glass reinforced nylon composite material providing high impact and tensile strength, resulting in a light weight unit, free from corrosion and electrolysis. The internal workings are moulded in a Teflon enhanced polymer for a smooth action, also ensuring continuous ease of operation over many years.

Part Numbers : 90471 Ball Valve 15mm ½” BSP 90240 Ball Valve 32mm 1 ¼” BSP 90276 Ball Valve 20mm ¾” BSP 90235 Ball Valve 40mm 1 ½” BSP 90242 Ball Valve 25mm 1” BSP 90472 Ball Valve 50mm 2” BSP

Tru Design Hose Tail Elbows

Manufactured in a glass reinforced nylon composite, providing both strength and durability. Connectors eliminate the corrosion and electrical bonding problems associated with metallic fittings. The Connectors are designed for twin hose clamps and to not crush under high load conditions.

The 90° Connector is especially useful for eliminating large radius bends involved in plumbing with stiff hose. This allows hose to be securely routed next to bulkheads and walls.

Part Numbers : 90699 Connector 90° Bend 19mm Black 90701 Connector 90° Bend 19mm White 90494 Connector 90° Bend 25mm Black 90493 Connector 90° Bend 25mm White 90291 Connector 90° Bend 38mm Black 90292 Connector 90° Bend 38mm White 90496 Connector 90° Bend 50mm Black 90495 Connector 90° Bend 50mm White Tru Design Hose Tails with Long Thread

Tru-Design has developed a comprehensive range of Tails, providing an easy hose connection medium for numerous marine situations.

Manufactured from a glass reinforced nylon composite, providing high strength and long life. The Tails have parallel threads for sealing using thread tape and long tails for secure double clamping of hoses.

Part Numbers : 90246 Tail 13mm ½” BSP Long Thread 90285 Tail 32mm 1¼” BSP Long Thread 90252 Tail 19mm ¾” BSP Long Thread 90231 Tail 38mm 1½” BSP Long Thread 90263 Tail 25mm 1” BSP Long Thread 90518 Tail 50mm 2” BSP Long Thread

Tru Design Female Thread Elbows with Hose Tails

A range of 90° Tails with Female threads to solve a number of problems encountered in marine plumbing applications. The Tail can be fitted directly to a Skin Fitting to create a 90° Skin Fitting with Tail. This allows the piping to run along the hull.

Moulded in Glass Reinforced composite Nylon 6 these Tails are also suitable for use in contact with Petrol and Diesel.

Part Numbers : 90631 Tail 32mm 1¼” BSP Female 90° Bend 90629 Tail 38mm 1½” BSP Female 90° Bend 90627 Tail 50mm 2” BSP Female 90° Bend 302 Plumbing - Tru Design Pipe Fittings

Tru Design Male Thread Elbows with Hose Tails

This range of Long Thread 90 º Tails are designed to screw into the range of Ball Valves but can also be used in many applications. Moulded in Glass Reinforced composite Nylon 6 these Tails are also suitable for use in contact with Petrol and Diesel.

Part Numbers: 90517 - Tail 13mm ½” BSP Long Thread 90° Bend 90374 - Tail 32mm 1¼” BSP Long Thread 90° Bend 90372 - Tail 19mm ¾” BSP Long Thread 90° Bend 90375 - Tail 38mm 1½” BSP Long Thread 90° Bend 90373 - Tail 25mm 1” BSP Long Thread 90° Bend 90376 - Tail 50mm 2” BSP Long Thread 90° Bend

Tru Design Hose Connectors

Tru Design offers a range of straight Hose Connectors to join 50mm, 38mm, 32mm, 25mm, 19mm and 13mm hose sizes.

Manufactured from a glass reinforced nylon composite material these connectors display high strength and high durability, allowing double clamping and a secure connection

Part Numbers : 90245 Connector 13mm/13mm 90356 Connector 32mm/32mm 90248 Connector 19mm/19mm 90290 Connector 38mm/38mm 90257 Connector 25mm/25mm 90492 Connector 50mm/50mm

Tru Design Hose Reducers

Tru-Design offers a range of straight Hose Reducers to mix and match different hose sizes.

Manufactured from a glass reinforced nylon composite material these connectors display high strength and high durability, allowing double clamping and a secure connection

Part Numbers : 90403 Reducer 19mm - 13mm 90406 Reducer 32mm - 25mm 90404 Reducer 19mm - 16mm 90407 Reducer 38mm - 25mm 90405 Reducer 25mm - 19mm 90408 Reducer 38mm - 32mm

Tru Design Y Pieces

A Y Piece is the best way for combining waste streams. Unlike a ‘T’ there is less likelihood of blockage, salt buildup does not degrade performance and the flow does not back up into the non-flowing branch.

Y Pieces are available in a variety of sizes to allow 25mm and 38mm drain hoses to branch into one line. Manufactured in Glass Reinforced Nylon 6 Polymer, they are extremely tough and will handle both hot and cold water.

Part Numbers : 90456 - Y Piece 25mm 90457 - Y Piece 25mm (2 pipes) / 38mm (single pipe) 90458 - Y Piece 38mm

303 Plumbing - Tru Design Skin Fittings

Tru Design Skin Fittings - Full Thread

Tru Designs range of Skin Fittings are certified by the International Marine Certification Institute (IMCI) in Belgium.

A unique grade of glass reinforced Nylon composite provides high impact and tensile strength.

Skin Fittings available in both black and white.

Part Numbers : 90424 Skin Fitting ½” BSP Black 90425 Skin Fitting ½” BSP White 90431 Skin Fitting ¾” BSP Black 90432 Skin Fitting ¾” BSP White 90422 Skin Fitting 1” BSP Black 90423 Skin Fitting 1” BSP White 90420 Skin Fitting 1 ¼” BSP Black 90421 Skin Fitting 1 ¼” BSP White 90418 Skin Fitting 1 ½” BSP Black 90419 Skin Fitting 1 ½” BSP White 90428 Skin Fitting 2” BSP Black 90429 Skin Fitting 2” BSP White

Tru Design Skin Fittings - Hose Tail

Tru Design Skin Fittings with Tail are designed for use above the water line where a Ball Valve or Seacock is not needed to be fitted. The integrated tail makes for quick, easy and compact installation.

Use of the unique grade of glass reinforced Nylon composite provides high impact and tensile strength.

Part Numbers : 90522 Skin Fitting with Tail 13mm ½” BSP Black 90426 Skin Fitting with Tail 13mm ½” BSP White 90523 Skin Fitting with Tail 19mm ¾” BSP Black 90427 Skin Fitting with Tail 19mm ¾” BSP White 90524 Skin Fitting with Tail 25mm 1” BSP Black 90430 Skin Fitting with Tail 25mm 1” BSP White 90525 Skin Fitting with Tail 28mm 1” BSP Black 90436 Skin Fitting with Tail 28mm 1” BSP White 90526 Skin Fitting with Tail 32mm 1 ¼” BSP Black 90433 Skin Fitting with Tail 32mm 1 ¼” BSP White 90527 Skin Fitting with Tail 38mm 1 ½” BSP Black 90434 Skin Fitting with Tail 38mm 1 ½” BSP White 90528 Skin Fitting with Tail 50mm 2” BSP Black 90435 Skin Fitting with Tail 50mm 2” BSP White

304 Plumbing - Tru Design Skin Fittings & Vents

Tru Design Skin Fittings - Recessed

Tru Design Recessed Skin Fittings - fully threaded for below water line applications

These new skin fittings can be recessed into the hull, and help to minimise the disturbance of water flow across the boats hull.

IMCI Certified to ISO 9093-2

Features : * Supplied with a Nylon 6 Natural washer to increase locknuts support on through hull assembly. * The use of composite Skin Fittings eliminates corrosion, and avoids electrolysis problems. * All types of Standard Bedding compounds and Epoxy or Polyester Resins can be used in installation.

Part Numbers : 90676 - Skin Fitting Recessed ½” BSP Black 90677 - Skin Fitting Recessed ¾” BSP Black 90678 - Skin Fitting Recessed 1” BSP Black 90679 - Skin Fitting Recessed 1 ¼” BSP Black 90680 - Skin Fitting Recessed 1 ½” BSP Black

Tru Design Vented Loops

Tru Designs Aquavent® has been designed and manufactured in New Zealand for use in Marine applications.

Vented loops are commonly used for inlet and discharge pipes on toilet installations below the water line. Our aquavent is moulded in a glass reinforced nylon composite, with a silicone bleed valve. The bleed valve allows air into the system to stop syphoning yet seals effectively when water or fluid pass through.

The aquavent can be used as a holding tank vent by replacing the bleed valve fitting with a tube that is connected to a deck level vent.

Aquavents are available in three sizes:

Part Numbers : 90319 - Vented Loop 19mm White 90318 - Vented Loop 19mm Black 90321 - Vented Loop 25mm White 90320 - Vented Loop 25mm Black 90323 - Vented Loop 38mm White 90322 - Vented Loop 38mm Black

305 Plumbing - Pipe Fittings

Elbows - Female to Female Elbows - Male to Female

Part Numbers : Part Numbers : 6444 - 15mm 6476 - 15mm 6445 - 20mm 6450 - 20mm 6446 - 25mm 6451 - 25mm 6447 - 32mm 6478 - 32mm 6448 - 40mm 6477 - 40mm 6449 - 50mm 6479 - 50mm Reducing Nipples Nipples Part Numbers : Used for joining pipes. 6470 - 20mm x 15mm 6471 - 25mm x 20mm Part Numbers : 6472 - 32mm x 25mm 6420 - 15mm 6482 - 40mm x 25mm 6421 - 20mm 6473 - 40mm x 32mm 6422 - 25mm 6474 - 50mm x 40mm 6423 - 32mm 6424 - 40mm Sockets 6425 - 50mm BSP Threads Reducing Bushes Part Numbers : Part (Outside x Inside) : 6480 - 15mm 6429 - 15mm x 10mm 6458 - 20mm 6430 - 20mm x 15mm 6457 - 25mm 6431 - 25mm x 15mm 6468 - 32mm 6432 - 25mm x 20mm 6469 - 40mm 6433 - 32mm x 20mm 6475 - 50mm 6434 - 32mm x 25mm 6435 - 40mm x 20mm Plugs 6436 - 40mm x 25mm 6437 - 40mm x 32mm Threaded Pipe Plug 6438 - 50mm x 20mm 6439 - 50mm x 25mm Part Numbers : 6440 - 50mm x 32mm 6453 - 10mm 6441 - 50mm x 40mm 6454 - 15mm 6442 - 65mm x 50mm 6456 - 20mm 6455 - 25mm 6452 - 32mm Vented Loop 25mm Stainless Steel

Vented loops are commonly used Cooling Water Strainer for inlet and discharge pipes on toilet installations below the Designed to filter out debris, sand, weed, plastic debris, etc. water line. before it blocks the engine cooling system. Assembly and mesh manufactured from impact resistant Part Number : 8513 polypropylene thermoplastic polymer. The clear threaded lid is acrylic.

Part Numbers : 18526-01 - For Hose 25mm 18526-02 - For Hose 32mm 18526-03 - For Hose 38mm

306 Plumbing - Water Strainers

Salt Water Strainer In-line Strainer - 15mm Thread

Salt Water Strainer for inline engine cooling systems. This is a Fine Mesh Filter device through which the raw water flows and is designed to 15mm Male Thread filter out debris, sand, weed, plastic debris, etc. before it blocks the engine. Part Number : 18524

Has removable filter or screen which should be checked and cleaned on a regular basis. Clear lid for visual check as well.

Dimensions: 320mm(H) X 280mm(W) X 180mm(D)

Part Number : Scoop Strainers 6804 - 40mm female thread 6803 - 50mm Hose Tails Keep debris from entering water or air intakes whilst promoting a healthy flow of water or air.

Glass reinforced nylon for strength and the elimination of electrolysis.

Part Numbers : 90410 - Scoop Strainer 2” - 177 x 129mm In-line Strainer - 3/4” Hose Tail 90411 - Scoop Strainer 1 ¼” - 96 x 130mm

In-line mesh filter suitable for installing within water supply lines to water pumps, drainage systems and shower discharge pumps. Bronze Scoop Strainers Mesh is easily removed so as to clean out lint and debris. Keep debris from entering water intakes. 3/4” Hose Tail Made of Marine grade Part Number : 18521 Bronze

In-line Strainer - 1/2” Hose Tail Part Numbers : 113420 - Scoop Large Mesh Filter Strainer - 80 x 120mm 1/2” Hose Tail 113421 - Scoop Strainer - 100 x 150mm Part Number : 18523

Bronze Intake Strainer - Removable Bronze Intake Strainer - Oval Round - Removable Cover Oval - 100mm x 70mm Overall Diameter: 80mm Pipe Size: 32mm or 1¼” Pipe size: 32mm or 1¼” Max Hull thickness: ~50mm Max Hull thickness: ~50mm

Part Number : 41501-03 Part Number : 13540-04

307 Plumbing - Showers Outside Shower Unit Shower Kit External shower box with lockable cover. Suitable for RV, Shower Box, Nozzle, Mixer, hose and fittings Caravans, motorhomes, camper trailers and marine use.

Box Dimensions: Designed for outside use, the 250mm x 190mm x 95mm door has an attachment for securing the shower head 2.5m or 5m hose length when in use.

Part Numbers : A complete shower kit 6565 (kit with 5m hose) complete with: 6566 (kit with 2.5m hose) Shower head Pull-out 1.2m white hose Hot and Cold Taps Shower Kit Dimensions: Shower Box, Nozzle, Mixer, Overall: 340mm (l) x 215mm (h) 5m hose and fittings. Cut-out size: 280mm (l) x 150mm (w) Depth 130mm Connection: 15mm BSP thread Recessed hatch: 178mm x 117mm x 84mm Part Number : 6549 deep

Part Number : 6553 Shower Sump System LSU600 - 12V

Small Shower Box with Mixer Designed especially for use on boats with built-in sink, shower, or tub. The LSU 600 will pump all water out of the drain / sump. Mixer Tap in housing with gasket. * Built-in automatic bilge pump that will start as soon as it senses water. Dimensions: 95 x 95 x 55mm(D) The LSU 600 System has 2 x 3/4” and Cutout Ø: 75mm 1 x 1” inlets and 1 x outlet hose with non-return valve for hose of 3/4” and 1” Part Numbers : diameter. 6555 - box with mixer 6550 - box only Dimensions: 100mm (h) x 195mm (w) x 260mm (including fittings or ~195mm Shower Box with Cap excl hose fittings)

Designed to fit shower nozzle with the Part Number : 31349 hose sticking out the bottom of the box.

Part Number : 6561 Shower Box with Cap - Round

Side-mount Housing with Door Designed to fit shower nozzle with the hose sticking out the bottom of the box. Designed for holding a shower nozzle Cutout: 66mm dia

External Dimensions: Dimensions: 145 x 190 x 80mm(D) 88mm dia x 80mm Cutout: 114mm x 160mm Part Number : 6557 Part Number : 6570 308 Plumbing - Showers

Shower Nozzle with Hose Shower Mixer

White coloured Shower Mixer Tap with connectors, ready to install. 2.5m or 5m hose length Dimensions: Part Numbers : 32mm dia cutout 6560W - 2.5m White 35mm dia knob 6562W - 5m White 40mm dia overall

Part Number : 6551

Shower Nozzle Water Accumulator

Same as in the boxed shower kits. Used for providing constant pressure in water systems. Designed for use in boats and RV’s. Thumb type trigger can click down to spray without pressing. 240mm long

Part Number : 6559 Part Number : 18527 Shower Nozzle

Part Number : 95725

Solar Shower Toilet Roll Holder Fill with water and hang up Part Number : 4632 in the sun, to get nice hot shower water.

2.5 Gallon or 5 Gallon Sizes

Part Numbers : 40072 - 2.5 Gallon 40075 - 5 Gallon Drain Sleeve

Has flange at one end and a nut at the other. 155(L) x 30(OD) x 23mm(ID) Outboard Well Drains

Part Number : 6761 Has flange at one end and a nut at the other.

80(L) X 30(OD) x 17mm(ID) Cockpit Drain 90º Elbow Drilling hole dia: 22mm

Tail dia: 38mm For bulkhead to 75mm

Part Number : 6753 Part Number : 4108

309 Plumbing - Diesel Heaters

Eberspacher Airtronic D2 Diesel Heater

A compact and economical heater for Sail and Motor boats 12-35ft in length or small motor homes.

Your Airtronic advantages: *Fast interior air heating with high performance power setting for especially short heating times. *Stops condensation from forming on the windscreen. *Automatic continuous interior temperature control with temperature pre-selection. *With the lowest setting on the market (850 – 900 W), it is extremely quiet. *Quiet night operation. *Low fuel and electricity consumption – ideal when long periods of use are required. *Compact devices that save space and are easy to install.

Specifications: *Fuel Type: Diesel *Voltage: 12/24V *Control / Heat Settings: Low, Medium, High, Power *Heat Output: Low – 850W, Medium – 1,200W, High – 1,800W, Power – 2,200W *Air Flow Volume: Low – 40Kg/h, Medium – 60Kg/h, High – 90Kg/h, Power – 105Kg/h *Electrical Power Consumption: Low – 8W, Medium – 12W, High – 22W, Power – 34W *Fuel Consumption: Low – 0.10l/h, Medium – 0.15l/h, High – 0.23l/h, Power – 0.28l/h *Dimensions: 310 x 115 x 122 *Weight: 2.7kg

Part Numbers : 406200 - Eberspacher Airtronic D2 Marine Heater Kit 406206 - Eberspacher Airtronic D2 Motor Home Heater Kit

Eberspacher Airtronic D4 Diesel Heater

A compact and economical heater for Sail and Motor boats 20-44ft in length or medium sized motor homes.

Specifications: Fuel Type: Diesel Voltage: 12/24V Control / Heat Settings: Low, Medium, High, Power Heat Output: Low – 900W, Medium – 2,000W, High – 3,000W, Power – 4,000W Air Flow Volume: Low – 60Kg/h, Medium – 110Kg/h, High – 150Kg/h, Power – 185Kg/h Electrical Power Consumption: Low – 7W, Medium – 13W, High – 24W, Power – 40W Fuel Consumption: Low – 0.11l/h, Medium – 0.25l/h, High – 0.38l/h, Power – 0.40l/h Dimensions: 376 x 140 x 150 Weight: 4.5kg

Part Numbers : 406202 - Eberspacher Airtronic D4 Marine Heater Kit 406208 - Eberspacher Airtronic D4 Motor Home Heater Kit

310 Plumbing - Diesel Heaters & Water Heaters

Eberspacher Hydronic D5WSC Water Heater

Eberspacher water heaters work independently of the engine and thus offer a double plus: pre-heating the Boat’s saloon or multiple cabins.

The heaters are integrated in the cooling water system of the engine. The thermal energy gained is absorbed by the vehicle’s own heat exchanger and distributed, finely dosed, into the interior as warm air through existing air vents. The engine is warmed up with the residual heat in the cooling water. And in summer you can easily enjoy pre-cooling with an Eberspacher Hydronic.

Cosy warm rooms, hot water: Your Eberspacher Hydronic water heater does all this for you. It keeps the cabin at the perfect temperature, and after a cold day outside, a hot shower is waiting for you. Your water is guaranteed to be at just the right temperature.

In short: you’ve got advantages all round when you install an Eberspacher Hydronic.

Specifications: *Fuel Type: Diesel *Voltage: 12V *Control / Heat Settings: Low, High *Heat Output: Low – 2,400W, High – 5,000W *Water Throughput: 900 +- 100 L/H *Electrical Power Consumption: Low – 23W, High – 50W *Fuel Consumption: Low – 0.27L/H, High – 0.62L/H *Dimensions: 220 x 86 x 160 *Weight: 2.3kg

Part Numbers : 406204 - Eberspacher Hydronic D5WSC Water Heater - Marine Kit 406205 - Eberspacher Hydronic D5WSC Water Heater - Motor Home Kit Force 10 Water Heaters

All Kuuma (Force 10) Marine Water Heaters come standard with Electric and high performance Heat Exchange capabilities.

* 1500 Watt AC element - 230 Volts (110v on request) * Large Heat Exchanger * TIG welded aluminium tank * Stainless Steel Case * 2 Year Warranty

Tested and certified to the latest Australian standards AS/NZS 60335.2.21-2002 - ESO Approval No. Q080349 UL & CE certified including the marine supplement - ignition protected

Installed by: Azzurra, Beneteau, Campion, Chris craft, Crownline, Doral, Donzi, Hunt, Hunter, Leopard, Nordic tug, Mustang, Princecraft, Riviera, Sabre

Direct replacement for most Seaward, & Atwood Marine Water heaters.

22.7 litre (6 US gal) 42 litre (11 Gallon) 76 litre (20 Gallon)

Length: 20 inch / 508mm Length: 23 inch / 584mm Length: 18.75 inch / 476mm Width: 15.5 inch / 394mm Width: 16 inch / 406mm Width: 18.75 inch / 476mm Height: 13.6 inch / 346mm Height: 16 inch / 406mm Height: 29.5 inch / 749mm

Part Numbers : Part Numbers : Part Number : 418101 406101 - side mounts 411101 - side mounts 406111 - front and rear mounts 411111 - front and rear mounts 311 Plumbing - Water Tanks

LALIZAS Water Tanks

Made from non-toxic PVC, they are suitable for drinking water.

The tanks are supplied with a valve, which can be used for filling, and with two extra fittings (cut through hole: 48mm). The cut- thru fittings are designed so you can add an outlet to the tank at the most suitable position to suit your application.

Supply valve can be removed. Without the valve you can connect to a 20mm threaded female fitting.

Supplied extra fittings: 1 x 12mm hosetail suitable as an outlet to your water supply pump. 1 x 40mm hosetail suitable as an inlet filler or joining tanks.

The Lalizas flexible water tanks are available in rectangular and triangular models. Water Tank - Folds Flat - 19 litre

Part Numbers : Water container designed so as to fold flat when not in use. 31321 - 55 Litre - Rectangular - 740mm x 600mm Ideal for tramping, canoeing, camping or anywhere water and 31325 - 55 Litre - Triangular - 860mm x 210mm x 930mm space savings are necessity. Holds 19 litres when full and collapses flat when not in use. 31322 - 75 Litre - Rectangular - 740mm x 840mm Dimensions when full: 31323 - 100 Litre - Rectangular - 740mm x 100mm 70 x 270 x 270mm 31326 - 100 Litre - Triangular - 1080mm x 210mm x 1080mm Part Number : 71050-01

Motorhome Waste dump kits

This Motorhome waste dump kit comes in to different sizes 25mm or 32mm to suite your application. Included in this kit are high quality WAM fittings made of durable polypropylene.

The kit consists of:

1 x 3M Flexible Waste Pipeline 1 x Pipeline Ball Valve 1 x Pipeline Female Camlock with Hose Tail 1 x Pipeline Male Camlock 1 x Pipeline Dust Cap

Part Numbers : 2010 - 25mm Motorhome waste dump kit 2011 - 32mm Motorhome waste dump kit WAM Female Pipeline Camlock with WAM Male Pipeline Camlock

Hose Tail The WAM Male Camlock is made of high quality durable polypropylene and comes in two different sizes 25mm or The WAM Female Pipeline Camlock with Hose Tail is made of high 32mm to suite your application. quality durable polypropylene and comes in two different sizes 25mm or 32mm to suite your application. Part Numbers : 2016 - Male Camlock 25mm Part Numbers : 2013 - Male Camlock 32mm 2014 - Female Camlock 25mm 2015 - Female Camlock 32mm

312 Plumbing - Washing Maching

Compact RV Washing Machine

Ideal for Caravans and Motorhomes, this easy to use Fully Automatic RV Washing Machine offers washing convenience wherever your travels take you. Featuring simple controls and flexible washing modes, you have the convenience of washing when you want in your own RV.

Features:

*240v. *Economical Cold Water Washing. *7 Washing Program combinations including Quick Wash. *Hi and Low water level adjustment for large & small loads. *Blue LED display with Wash Time Remaining function. *Out of balance sensor with auto rebalancing during spin cycle. *Auto Power Off function. *Precision Stainless Steel wash tub. *Inbuilt Lint Filter. *Clothes Basket doubles as a Tub Stabiliser in transit. *Securing Strap & Bracket Included. *Dimensions (mm): 410w x 420d x 640h. *1 Year Warranty.

Part Number : 5008 Safety

315. Inflatable 319. Man 323. Horns 326. Fire

Lifejackets Overboard Safety Signal Horn 380ml Extinguisher Signal Horn 200ml Equipment Chubb Marine 1.0kg - Dry Powder Lalizas Sigma Lifejackets 150N, CE MaXtek Safety Blaster Horn MaXtek Dual Trumpet Stainless Fire Extinguisher ISO 12402-3 Lifebuoy Ring SOLAS with Steel Horn Chubb 2.3Kg Dry Powder Fire Lalizas Sigma Lifejackets 150N Reflective Tape MaXtek Single Trumpet Stainless Extinguisher Lalizas Delta 150N, Inflatable Lalizas Horseshoe Lifebuoy Basic I Steel Horn Chubb Fire Extinguisher 4.5 Kg - BE Lifejacket Belt-Pack CE ISO Life Saving Float - 4 person Horn Dry Chemical 12402-3 Plastic Holder for Life Ring Refill Canister 380ml Fire Blanket Lalizas Alpha Child’s Gas Inflate Life Ring Holder Refill Canister 200ml Lifejacket 150N, CE ISO 12402-3 Throwing Ring with 30m Floating Mega Horn Rope Megaphone w Siren , 20W , 400m 327. Flare Packs 317. Lifejackets Horn Stainless Steel - Round 320. Day Signs & Flare Packs Lalizas Commercial SOLAS Dinghy Flare Pack Lifejacket - Adult Safety Ladders 324. EPIRB’s Cruising Flare Pack Lalizas SOLAS ‘74 Life Jacket YNZ CAT 4 Flare Pack Ski Buoyancy Aid CE 50N Flushmount Safety Ladder McMurdo Smartfind G5 406Mhz Power Boat Flare Pack Lalizas Childs Lifejacket Chico CE Safety Ladder GPS EPIRB Auto Coastal Flare Pack 100N Kayak Safety Kit and Bailer McMurdo Smartfind Plus/G5 YNZ CAT 1 Flare Pack Pet Retriever Buoyancy Aid & Anchor Ball - Day Sign 406Mhz GPS EPIRB Harness Motoring Cone - Day Sign McMurdo Fastfind 220 Mini PLB Radar Reflector McMurdo Grab Bag Small McMurdo Grab Bag XL 318. Personal 321. Harnesses

Safety Lights & Single Hook Safety Line - 1.5m Twin Hook Safety Line - 1.85m Accessories Twin Hook Safety Line Elastic - 1.20/1.77m Auto Re-arm Kit for Child’s Triple Hook Safety Line - Lifejacket (JS1) 1.20/1.77m Manual Re-arm Kit Harness & Lifejacket Crotch Strap Harness & Lifejacket Crotch Strap Auto Re-arm Kit Lifejacket Flashing Light - Water Activated 322. Bosun’s LED floating Lifebuoy light Chairs Lifebuoy Light Mounting Bracket Lalizas Safety Bosun’s Chair Lalizas Professional Bosun’s Chair Lalizas “Life-link” Safety Harness Safety Harness Vestype

314 Safety - Inflatable Lifejackets 2014 Lalizas Sigma Lifejackets 150N, CE ISO 12402-3

This Sigma CE 150N lifejacket is an economic lifejacket available in auto and manual versions. The ultra lightweight design makes it comfortable to wear and its webbing system makes it a user-friendly lifejacket.

The inflatable bladder, which is manufactured from high visibility yellow fabric, is folded into a nylon red valise with velcro closure and it is also equipped with Lalizas retro reflective tapes and whistle. Features lifting loop and heavy duty D- ring for easier rescue.

Transparent window allows visible indication as to the firing/arming status of the jacket.Transparent area allows the user to check the operating head function.

* EUROPEAN QUALITY * EUROPEAN SAFETY *

This is the most popular style of lifejacket due to the fact you are not restricted.

Suits weights 50kg and above. Waist belt adjusts up to 150cm.

* Comfortable long wear option compared to foam life jackets * Features a manual pull tab for inflation (1 inflate per bottle)., plus a mouth piece for inflation/deflation). * 170 Newtons of buoyancy when fully inflated * CE ISO 12402-3 Approval

Part Numbers : 71097 - Manual 71095 - Manual Gas Inflate Lifejacket with D-ring 2014 Lalizas Sigma Auto Lifejackets 150N

* EUROPEAN QUALITY * EUROPEAN SAFETY *

* Comfortable long wear option compared to foam life jackets * Features a manual pull tab for inflation (1 inflate per bottle)., plus a mouth piece for inflation/deflation). * 150 Newtons of buoyancy when fully inflated * CE EN396 Approval

Part Numbers : 71096 - Auto Gas Inflate Lifejacket 71096-B - Black Auto Gas Inflate Lifejacket with Crotch strap 71094 - Auto Gas Inflate Lifejacket with D-ring

New 2014 Lalizas Sigma 71096-B - Black Auto Gas Inflate Lifejacket with Crotch strap

315 Safety - Lifejackets

Lalizas Delta 150N, Inflatable Lifejacket Belt-Pack CE ISO 12402-3

A comfortable non-intrusive buoyancy aid ideally suited for paddle boarding.

This high quality belt-pack PFD is all you need. Clip it on around your waist, slide the pouch around to your back. To deploy simply slide the pouch around to your front, pull the tag and the jacket will automatically inflate. Pull the jacket over your head.

The inflatable bladder, which is made of High Visibility Yellow fabric, is folded into a nylon red valise with Velcro closure and it is also equipped with Lalizas retro reflective tapes (70180) and whistle (70010, certified per ISO 12402-7 & 8).

They are provided with lifting loop for easier rescue.

Part Number : 71109

Lalizas Alpha Child’s Gas Inflate Lifejacket 150N, CE ISO 12402-3

The Alpha gas inflation lifejacket has been designed to offer affordable safety for all. Its compact design, low weight, high quality construction. The Alpha features one chamber which is inflated automatically.

The inflatable bladder, which is manufactured from high visibility yellow fabric, is folded into a nylon red valise with velcro closure and it is also equipped with Lalizas retro reflective tapes and whistle. Features lifting loop and heavy duty D- ring for easier rescue.

* Made in Europe * EUROPEAN QUALITY * EUROPEAN SAFETY *

Alpha & Sigma Lifejacket features: * CE ISO 12402-3 approval * Reflective Tapes * Twin welded air bladder seam for double security (Alpha only) * Ultra reliable firing mechanism * Compatible with all major suppliers CO2 bottles * Commercial heavy duty weight protective outer shell * Easy re-packing * Economical re-arming kits * 170 Newtons of buoyancy when fully inflated * Maintain the correct flotation position in the water (face-up) * Fully adjustable sizes * Buoyancy 150N

Part Number : 71102 (Child’s Size Alpha - Auto inflate)

316 Safety - Lifejackets

Lalizas Commercial SOLAS Lifejacket - Adult

Primarily aimed at the commercial market these cost efficient lifejackets have been built to comply with the latest Solas 2010 safety standards.

These jackets are manufactured to equip all commercial vessels. They fully comply with the requirements of the latest regulations (IMO Regulations). They feature special ergonomic design which allow them to adjust easily to every size. Suitable for all weather conditions. It is recommended to combine with a Lalizas lifejacket light.

Designed for use by Adults with body weight from 43kg to 140kg Chest Girth up to 1750mm

Dimensions: 50cm (L) x 35cm (W) x 13cm(D)

Part Number : 70178

Lalizas SOLAS ‘74 Life Jacket Ski Buoyancy Aid CE 50N Commercial grade lifejacket manufactured in accordance with SOLAS 74 requirements. Basic “yoke style” floatation designed * Equipped with a three buckle closure system using 45mm to support an unconscious person and right them so their face webbing straps. is out of the water. Orange * High quality construction colour with signal whistle. coupled with extra side and Meets solas 74 requirements for chest buoyancy. Type I floatation on commercial * Provides the added protection vessels. required by extreme water sports enthusiasts. An ideal economical jacket for recreational use. Buoyancy (N): 75 Body Weight (Kg): >70 Buoyancy (N): 95 Chest Size: (cm): 115-130 Body Weight (Kg): >55 Part Number : 20294 Part Number : 70159

Lalizas Childs Lifejacket Chico CE 100N

New Lalizas Chico lifejacket provides a good fit and maximum safety.

Fun life jacket for small children featuring a colourful marine print.

Chico lifejacket provides a good fit and maximum safety. A large floatation collar supports the child’s head and has a built-in-grab strap to aid recovery. An adjustable waist belt and a crotch strap keep the vest securely in place whilst in the water. It is available in orange and yellow.

This Lalizas Chico lifejacket is approved to European Standards. (ISO 12402-4)

Part Numbers : 71073 - Lalizas Chico Lifejacket 15-30kg (Buoyancy 45Nt) 71074 - Lalizas Chico Lifejacket 30-40kg (Buoyancy 55Nt)

317 Safety - Lifejackets & Accessories

Pet Retriever Buoyancy Aid & Harness

Keep your pet safe on board with the Lalizas Pet Retriever. Buoyancy aid and Harness. The Lalizas Pet Retriever features a foam construction buoyancy aid and strong lifting loop to enable you to retrieve your pet. Suitable for both dogs and cats. Available in three sizes.

Part Numbers : 20020 for Pets under 8 kg 20021 for Pets 8-15kg 20022 for Pets 15-40kg

Lifejacket Flashing Light - Water Manual Re-arm Kit Activated Manual Re-arm Kit (Adult’s Lifejacket 33g CO2) - LED Flashlight Technology - Water Activated 2 x cylinders in each kit. - Inspection friendly label - Funtions only when in-water* Part Number : 20160 * Guarantees protection against the unnecessary use and battery loss, out of the water. “Safelite II” Functions Auto Re-arm Kit 1. WATER ACTIVATED AUTO-ON: The Safelight II is activated automatically, when it comes in contact with water. Auto Re-arm Kit 2. MANUAL-OFF (In-Water Function Only): While in use, by for JS1 Inflator pressing the ON/OFF button the Safelight II will switch-off, to (Adults Lifejacket) 33gr save battery. 3. MANUAL-ON (In-Water Function Only): While switched-off, Part Number : 20190 by pressing the ON/OFF button, the Safelight II will switch-on.

Specifications - Extra powerful LED light, for lower consumption and longer life Auto Re-arm Kit for Child’s - Quick and easy installation with two moves. - Fits and locks with every 20-40mm lifejacket belt, providing Lifejacket (JS1) security and stability against sudden panic moves. - Lithium battery with 5 year lifetime, from the indicated A replacement 22gr CO2 gas cylinder and production date and more than 8 hours of continuous use. automatic firing inflator for use with Lalizas - Waterproof. Alpha child lifejackets. Part Number : 71209 Part Number : 20200 Harness & Lifejacket Crotch Strap

The crotch strap can be used LED floating Lifebuoy light with all Lalizas lifejackets / buoyancy aids and harnesses Very compact lifebuoy light, low power consumption. Part Number : 20210 LED-type flashlight, operates on one D size battery Lifebuoy Light Mounting Bracket 360° arc of visibility. Dimensions : 160 x 80 x 80 mm. Nylon bracket to securely hold Weight : 90 g. (without battery). the 196482 Lifebuoy Light

* Light Intensity: 2 candela Attach to rails from 3/4” to 1” * Duration: Approx 8 hours at 60 or can be screwed direct onto flash/minute. a bulkhead.

Part Number : 196482 Part Number : 196482MOUNT 318 Safety - Man Overboard safety Equipment

Lifebuoy Ring SOLAS with Reflective Tape

Designed for pleasure and commercial usage, features an orange, rack hard, cross- linked polyethylene outer shell that will not deteriorate and is unaffected by extreme weather conditions. CE approved to SOLAS (L.S.A Code)* by G.L. Hamburg.

730mm ext Ø, 440mm int Ø, 105mm H

Part Numbers : 70090 (2.5 kg) 70110 (4 kg) 91670 (Stainless Steel Life Ring Holder)

Lalizas Horseshoe Lifebuoy Basic I

Lalizas Horseshoe Lifebuoy Basic I consists of a flexible zipper cover and features a plastic clip fastening.

Dimensions: 500mm(W) x 500mm(H) x 100mm (Thickness)

Part Numbers : 20530 (orange) 20540 (white) 20550 (yellow) 20580 (Stainless SteelBracket with light holder)

Life Saving Float - 4 person

Life Saving Apparatus (Plastic) - For use on sail or motor boats - Outer cover made of high strength polyethylene with an inner polystyrene filling - Complete with all-round rope lifeline - 4 person model - High visibility orange - Approved to EEP. Approval number: 4232/46/00

Part Number : 70131 Life Ring Holder Plastic Holder for Life Ring This holder is ideal for placing and storing your ring or horseshoe lifebuoy. It comes with a plastic holder, Part Numbers : which makes it easy to mount onto your boat’s rails. 01106 (single piece) It is made of stainless steel and comes with a small 01107 (set of 3 pieces) elastic stretch cord for keeping the lifebuoy steady. You can also store the lifebuoy light since it features plastic clips on the base of the holder. Throwing Ring with 30m Floating Rope Part Number : 95733 Throwing Ring (Ø 175mm) with 30m Floating Rope

Designed for the retrieval of MOB, the ring is moulded in PVC, weighing only 250gr, and it is tied to a 30metre floating rope.

Part Number : 20693 319 Safety - Safety Ladders & Day Signs

Flushmount Safety Ladder Safety Ladder

Helps any crew member get back on board Designed to easily without external help. increase safety on board, this ladder comes Suitable for bathing or in case of Man Over Board. in a canvas bag with 2 handles: Consists of 3 polypropylene steps and 1 stainless steel one handle to handle assembled by a highly resistant line (bright yellow attach the bag 3mm polyester) alongside the boat; the other handle for the man Ladder is stored in a polyamide tube with a grey fallen overboard to grab. polypropylene cap, for optimum protection and waterproofness. The bag pulls open and the ladder unfolds The Man Over Board removes the cap, pulls the ladder instantly, helping the down, and climbs onboard. person to get back on * Light weight board easily. * Very easy Flush Mount * Transom or skirt Mount, Part Number : 29008 just above waterline

Part Number : 51558

Radar Reflector

Complies with the R.O.R.C Kayak Safety Kit and Bailer * 300 x 300 x 415mm Safety Bailer Kit suitable for all small boats incliding kayaks. * Folds Flat for storage

* Emergency 1.5 Ltr Bailer: Built in ergonomic handle Part Number : 9300 * Throw rope (50ft Poly rope and orange float) * Rubberized AA torch (Batteries not included) * Whistle for attracting attention Motoring Cone - Day Sign * Signal mirror with target sight hole * Navigation compass, liquid damped Internationally recognised for use when at anchor. Features: • Folds flat for easy stowage * Bailer mouth designed for round and square boat hulls • Base 330mm x Height 470mm * Waterproof and air tight container, with 0-ring sealed lid * Bright colour for easy sighting in an emergency Part Number : 9319 * Kit floats and includes security lanyard Anchor Ball - Day Sign Part Number : SW22101 Internationally recognised for use when at anchor.

* 30cm Diameter * Folds Flat for storage

Part Number : 9320 320 Safety - Harnesses

Single Hook Safety Line - 1.5m

Approved to EN 1095. The double action hook design prevents accidental opening whilst still offering superb single handed operation. The hook is also fully approved to EN 362.

Length: 150 cm

Part Number : 20400

Twin Hook Safety Line - 1.85m

Approved to EN 1095. The double action hook design prevents accidental opening whilst still offering superb single handed operation. The hook is also fully approved to EN 362.

Length: 185 cm

Part Number : 20410

Twin Hook Safety Line Elastic - 1.20/1.77m

Approved to EN 1095. The double action hook design prevents accidental opening whilst still offering superb single handed operation. The hook is also fully approved to EN 362.

The elastic line contained in the 20420 is constructed to break when too much weight is lifted, thus indicating that the line must be replaced.

Length: 120 to 177 cm

Part Number : 20420

Triple Hook Safety Line - 1.20/1.77m

Approved to EN 1095. Double action hook design prevents accidental opening whilst still offering superb single handed operation. The hook is fully approved to EN 362.

Part Number : 20430

Harness & Lifejacket Crotch Strap

The crotch strap can be used with all Lalizas lifejackets / bouyancy aids and harnesses.

Part Number : 20210

321 Safety - Harnesses, Bosun’s Chairs & Safety Horns

Lalizas Safety Bosun’s Chair

This bosun’s chair is made of reinforced Nylon 210D with PVC backing, 0,35mm thick. It comes complete with safety straps for added security, fitted side pockets for tools and a padded wooden seat. LALIZAS offers you a bosun’s chair to allow you to work comfortably, safely and in balance.

Part Number : 10080L

Lalizas Professional Bosun’s Chair

Lalizas Professional Bosun’s Chair has been designed according to the highest quality standards, so that it can be used easily by professionals.

1) Reinforced Nylon with PVC backing and PP webbing 2) Supreme comfort for extended time aloft 3) Comfortable wrap-around back 4) Adjustable strap between the legs for extra safety 5) Stows in its own bag, 6) Attached side tool case 7) Pocket to fit an optional wooden seat (Part Number: 00169) 8) Retro reflective tapes for better visibility 9) Floats in the water when it is empty

Part Number : 10210

Lalizas “Life-link” Safety Harness

The Life-link safety harness is approved to pr EN 1095 its features include a heavy duty stainless steel inter-locking buckle and ‘D’ ring, fully adjustable waist band, retro reflective patch and toggle fastening to fit most full weather gear.

* Adult Harness fits waists 80cm to 140cm * Child Harness fits waists 40cm to 80cm

Part Numbers : 20370 (Adult) 20380 (Child)

Safety Harness Vestype

Highly Visible Safety Harness with Chest D-Ring

Part Number : 71152

Signal Horn 380ml Refill Canister 380ml

Acoustic range approximately Screw Type Fitting, 1500m Refill Canister 380ml Screw type fitting Suits 10033 Horn

Part Number : 10033 Part Number : 10032

322 Safety - Horns

Signal Horn 200ml Refill Canister 200ml The Echo200 is a handy easy to use device for signalling your position in fog, rescue or any For pressure fit horn emergency situation. Refill Canister 200ml Suits Echo200 Horn * Acoustic range approx 1500m * Removable horn Part Number : 11505 * Set includes Horn Trumpet and Canister * CE Rated Mega Horn Part Number : 11506 Whether you use Mega Horn in an emergency or for pleasure you certainly will be heard. MaXtek Safety Blaster Horn Red colour, Floating, non corrosive. Friendly MaXtek Safety Blaster Horn can produce a 120dB call which to the environment. can be heard up to 1 mile away. Sound measures at least 105 D.B.

Part Number : 15007 (Blister Packed) Part Number : 10040L

Lalizas Whistle - Orange

Used for attaching to LifeJackets and other Man Overboard safety equipment

ISO 12402-8 CE

Part Number : 70020

MaXtek Dual Trumpet Stainless Steel Horn Megaphone w Siren , 20W , 400m

400HZ +/- 15, 350HZ Power: 20W +/- 15 Sound Coverage: 400m 105 +/- 5dB approx. 460mm long Function: Talk/Siren Batteries: 6D Part Numbers : ABS Housing 15023 (12 Volt) Diameter: 200mm 15023-24 (24 Volt) Length: 350mm 15023-BP (12 Volt Blister Pack) Part Number : 90168 MaXtek Single Trumpet Stainless Steel Horn MaXtek Horn Stainless Steel - Round 12 or 24 Volt 450 x 90mm 12 Volt 3” Diameter , 2” High Part Numbers : 15011-12 (12 Volt) Part Numbers : 15011-12-BP (12 Volt Blister Pack) 15035 15013-24 (24 Volt) 15035-BP (Blister Packed)

323 Safety - EPIRBs

Emergency Position Indicating Radio Beacons (EPIRBs) are essential on your list of safety gear. When activated they last for at least 24 hours and work day and night. Our personal EPIRB’s also offer hunters and trampers security in the bush.

McMurdo Smartfind G5 406Mhz GPS EPIRB Auto

McMurdo Smartfind Plus/G5 406Mhz GPS EPIRB - Auto Float Free Housing

The Auto Float Free Housing meets SOLAS requirements and will automatically deploy the EPIRB when submerged to a depth lower than 2 - 4metres in the sea.

The addition of a GPS receiver to the EPIRB ensures that the exact position of a casualty is relayed to the rescue services. This can in turn improve the speed of recovery by updating the position of the beacon at regular intervals.

Features: Will transmit for a minimum of 48 hours 5 year warranty* 5 year battery life* Product Accessories HRU Replacement Kit Carry Safe Manual Bracket

Part Number : G5EPIRBAUTO

McMurdo Grab Bag Small McMurdo Grab Bag XL

Waterproof and buoyant it has McMurdo Grab Bag XL is made from the same high quality plenty of space for emergency material as our standard grab bag. The XL version has an equipment survival supplies. external EPIRB pouch, and flare stowage pockets.

* High visibility * Buoyant * Buoyant * Waterproof * Waterproof * Watertight zip and Velcro * Carry handles and Part Number : 87-300 shoulder strap

Part Number : GRABBAGXL

324 Safety - EPIRBs

McMurdo Smartfind Plus/G5 406Mhz GPS EPIRB

The G5 SMARTFIND PLUS has all the advanced features of the standard E5 SMARTFIND with the addition of an integral 12 channel GPS receiver. The addition of a GPS receiver to the EPIRB ensures that the exact position of a casualty is relayed to the rescue services.

This incorporation of positional information overcomes the location problem when using geostationary satellites and can greatly reduce the time it takes for the SAR authorities to arrive on the scene.

Features: High brightness LED flashing locator lights Will transmit for a minimum of 48 hours 5 year warranty* 5 year battery life* Product Accessories H R U Replacement Kit Manual Release Bracket

Part Number : 87-302

McMurdo Fastfind 220 Mini PLB

The Fast Find 220 is a 406 MHz Personal Location Beacon (PLB) that should be carried by individuals, who are embarking on trips into areas around the world where there is little or no other form of communication or where other forms of communication are unlikely to work. The Fast Find acts as your personal Emergency Location Beacon, it is your last resort communication to the national and international search and rescue bodies and it should not be mis-used. The Fast Find is designed as a direct communication, to the 406 MHz Search and Rescue satellite system, its signal indicates that you are in need of urgent response and assistance.

Its small size belies its rugged construction and powerful output. There is no compromise. Once activated, the distress beacon will obtain a GPS position, send out a signal for help, and continue to transmit for at least 24 hours, at a powerful 5 watt output, ensuring that your call for help gets through whatever the conditions.

The Fast Find weighs just 5.3 oz (150g) and measures D 34mm x W 47mm x L 106mm.

Part Number : 87-304

325 Safety - Fire Equipment

Chubb Marine 1.0kg - Dry Powder Fire Extinguisher

These non toxic dry chemical powder extinguishers have been tested to ensure they can suppress different types of fire with quick flame knockdown, indicated by the class rating 1A:10B:E

The A:B:E rated extinguisher can be used on fires involving wood, paper, fabric, carpet, flammable liquid and electrical based fires.

This extinguisher complies with the stringent Australian Standards. Chubb extinguishers are warranted against faults in materials and workmanship for six years when installed and maintained by Chubb in accordance with the appropriate Australian and NZ standards.

Applications: Vehicle, Boat, Caravan, Home, Garage and Workshop

Part Number : CHUBB1KG

Chubb 2.3Kg Dry Powder Fire Extinguisher

The “ABE” can be used on fires involving wood, paper, flammable liquid and live electrical equipment. This extinguisher complies with the stringent Australian Standards. Your Chubb extinguishers are warranted against faults in materials and workmanship for six years when installed and maintained by Chubb in accordance with the appropriate Australian and NZ standards.

Applications: Electrical switchboards, Buses and Garages

Part Number : CHUBB2.3

Chubb Fire Extinguisher 4.5 Kg - BE Dry Chemical

The “BE” dry chemical extinguisher can be used on fires involving flammable liquids and live electrical equipment. The high performance BCX powder offers the same knock-out capacity as conventional 9.0kg dry powder extinguisher.

Applications: Mining vehicles: Cargo Carriers, Light Industry, Boat, Caravans and Workshops

Part Number : CHUBB4.5

Fire Blanket

Essential in high-risk areas, such as the kitchen are fire blankets. The model offered is 90x90cm wide and is supplied in a rigid case, with instructions printed on top.

Part Number : 70448

326 Safety - Flare Packs

Flare Packs

The most reliable pyrotechnic distress signals - SOLAS approved and manufactured to ISO 9001 standard.

Dinghy Flare Pack Power Boat Flare Pack

Pack in waterproof container. Pack in waterproof container. Contains: Contains: 3 x red hand flares 2 x red hand flares 1 x orange smoke torch Part Number : PPAK27041 Part Number : PPAK27040

Cruising Flare Pack Coastal Flare Pack

Waterproof container. Waterproof container. Contains: Contains: 1 x parachute distress rocket 2 x parachute distress rocket 2 x red hand flares 2 x red hand flares 1 x orange smoke torch 2 x orange smoke torch

Part Number : PPAK27023 Part Number : PPAK27022

YNZ CAT 4 Flare Pack YNZ CAT 1 Flare Pack

Waterproof container Waterproof container Contains: Contains: 2 x red hand flares 4 x parachute distress rockets 2 x white hand flares 2 x red hand flares 2 x orange smoke torch 2 x white hand flares 2 x orange smoke torch Part Number : PPAK27018 Part Number : PPAK27017 327

Seats & Tables

330. Seats & 334. Tables & Cushions Pedestals

Table Pedestal - 316 Stainless Steel Seat with Flip Up Leg Bolster Round Table Top Rhyder High Back Seat Adjustable Height Floating Boat Cushion - Double Stainless Steel Table Bracket Classic Marine Boat Seat Table Pedestal Rhyder Cruiser Seat Square / Rectangular Table Top Buoyant Deck Cushion - Single Flush style mount for Pedestal base Crew Folding Padded Seat Surface mount for Pedestal base Fisherman Fold Down Seat Crew Folding Padded Seat with Drink Holder Crew Folding Padded Seat - Grey Fisherman Deluxe Fold Down Seat - Swivel Mount Seat Swivel - Powder Coated Steel Aluminium Seat Swivel Seat Pedestal Fixed

332. Seat & Table Pedestals

Universal Seat Trac-Lock Slider Fixed Seat Pedestal - 300mm Adjustable Seat Pedestal 480- 633mm Flush Mount Adjustable Seat Pedestal 473-600mm Adjustable Seat Pedestal 500- 750mm Seat Pedestal Gas Adjust Seat Pedestal Gas Adjust 18” - 24” Seat Pedestal Fixed Seat Pedestal Adjustable Surface Mount for SS Pedestal Flush Mount for SS Pedestal Table Pedestal Table Pedestal Set - Removable Table Pedestal – 316 Stainless Steel

329 Seats & Tables - Seats & Cushions

Seat with Flip Up Leg Bolster Classic Marine Boat Seat

This seat has a cushioned leg bolster that folds up and back for High grade UV resistant marine upholstery. when you are standing at the helm. Durable, injection-moulded plastic seat frame. * Heavy duty marine grade vinyl with high density foam * Corrosion-resistant hinge High-compression foam padding for comfort * Colours: White/Navy (as pictured), Black/Grey and Blue/Grey Dimensions (mm): Dimensions: 650 (D) x 500 (H) x 530mm (W) 620 (w) x 660 (d) x 660 (h)

Part Numbers : Part Number : S09 S120 - White/Navy S120B - Black/Grey S120BL- Blue/Grey

Floating Boat Cushion - Double Buoyant Deck Cushion - Single

Buoyant deck cushions Dimensions: Waterproof outer material and are filled with polyethylene 400 x 400 x 65mm foam. There are integral straps around the cushions so as to Buoyancy: 9kg carry them easily and quickly. The cushions lock on your boat Weight: 0.55kg-0.6kg through a nylon hook at their back. Part Numbers : White cushions are made of PVC, while red blue and cushions 11511 - White are made of polyester with PVC overlay. 11515L - Blue

Dimensions: 830mm x 400mm x 65mm Buoyancy: 19kg Weight: 1.2kg-1.25kg

Part Numbers: 11512 - White 11514 - Red 11516 - Blue

330 Seats & Tables - Seats & Swivels

Crew Folding Padded Seat Fisherman Deluxe Fold Down Seat -

UV and mold-resistant seats Swivel Mount Maintenance free, Thermo moulded plastic High-impact injection Suits standard square base moulded frames, anodised mounts. aluminium hinges and heavy grade UV resistant Part Numbers : S001R - Light Grey/Red marine upholstery. S001B - Blue/Grey These seats fold down flat when not in use. Crew Folding Padded Seat with Part Number : S10B Drink Holder

Drink Holder supplied Fisherman Fold Down Seat separately and requires assembly. (Requires two SS Suits standard square base Screws; not supplied) mounts.

Suits standard square base Part Number : S10 mounts.

Part Number : S002

Crew Folding Padded Seat - Grey Seat Swivel - Powder Coated Steel Suits standard square base mounts. 360º seat swivel manufactured from powder coated steel. Budget swivel with nylon slide runners for silent smooth operation. Part Number : S001 Black, powder coated steel Nylon Slide Runners Swivels 360º Hole pattern fits most seats

Dimensions: 152mm (l) x (w) 8mm mounting holes Aluminium Seat Swivel Part Number : 4488 Constructed from high tensile H321 alloy for maximum Universal Seat Trac-Lock Slider corrosion-resistance and durability. Convert your existing marine seat into an adjustable sliding seat. With universal mounting holes this can easily be installed on to a 4-hole pattern for fixed pedestal or mounting frame. easy mounting. • Large 178mm (W) x 330mm (L) x 50mm (H), 0-Degree Platform Allows smooth easy 360º rotation of the seat. • High-Strength Aluminium • Travels 130mm Forwards and Backwards * Made in NZ * Corrosion Resistant Part Number : 50105 Dimensions 170 x 170 x 22mm 138mm mounting hole centres (Adjustable)

Part Number : 4487

331 Seats & Tables - Seats Pedestals

Fixed Seat Pedestal - 300mm Seat Pedestal Gas Adjust 380-510mm

Aluminium Seat Pedestal; fixed 300mm vertical height Premium grade Seat Pedestal with pressurised gas adjustment.

Built for the salt water environment *Gas soft ride pedestal – 380 – 510mm and constructed from anodised *Back /Forward slide controls aluminium with a heavy duty *Full height control from 380 – 510mm die-cast alloy base. 360º rotational 360º swivel control swivel with lock. Mounting base suits countersunk screws or hex nuts. Part Number : S134

Part Number : S136

Adjustable Seat Pedestal 480-633mm

Telescopic height adjustment makes this pedestal suitable for either a Seat Pedestal Gas Adjust 530 - 710mm helm seat or converting dinettes into bunks. Premium grade Seat Pedestal with pressurised gas adjustment.

Manufactured from corrosion *Finger tip control of height control resistant materials; anodised *Seat forward and back control slider aluminium, glass filled nylon and *Alloy construction stainless steel. Solid construction *Premim grade with sturdy 300mm with wide 230mm alloy floor base. diameter base

Seat base has 360º swivel control. Height: adjusts from 530 - 710mm (21” to 28”) Mounting base suits countersunk screws or hex head. Accepts 50105 Part Number : S132 seat slide.

Part Number : S138 Flush Mount Adjustable Seat Pedestal Adjustable Seat Pedestal 500-750mm 473-600mm Aluminium Seat Pedestal with vertical height adjustment and rotational swivel Aluminium Seat Pedestal with height adjustment and 360º swivel control. Built for the salt water environment. Strong adjustable pedestal - Telescopic 500-750mm Seat can be adjusted in height from 480-633mm in 5 stages. Professional installation can be achieved as mounting base sits * Built for the salt water environment flush within the floor cavity. * Anodised aluminium construction and stainless steel materials * Flush mounting * Heavy duty die-cast alloy base * Aluminium Seat connector * Cast alloy seat base * 5 height adjustments * Strong Extruded aluminium tube * 360º seat rotation with lock * Alloy swivel with rotational lock * Anodised aluminium construction * Heavy duty die-cast alloy base Mounting base suits countersunk and extruded aluminium tube screws or hex nuts. Part Number : S140 Part Number : S142

332 Seats & Tables - Seat & Table Pedestals

Seat Pedestal Gas Adjust 455 - 625mm Table Pedestal

Softrider Seat Pedestal Gas Adjust Chromed Steel Table Pedestal (710mm long) with Aluminium Base and Height is fully adjustable between 455 - 625mm. Seat back and Top forwards control with robust slider. Full 360º swivel control. Part numbers : 54019 - Chromed steel pedestal Dimensions: 54017 - Aluminium Top mount Base Diameter: 230mm (9”) 54018 - Aluminium Flush mount base for Overall Height: 455mm lowered floor mounting. or 625mm raised. Complete Part Number : 54020 Part Number : S144

Seat Pedestal Fixed Table Pedestal Set - Removable

Stainless Steel Aluminium pedestal which has a lock mechanism at the base. Quick release allows *Seat not included (just shown in for easy removal and stowage of the table. pictures as example of use) Dimensions: Part Number : 4482 Total Height: 730mm Height from base to underside of table: Seat Pedestal Adjustable 675mm Pole Diameter: 60mm Stainless Steel Recess Diameter 100mm Height Adjustable Plate Diameter Top: 178mm Base Diameter: 178mm *Seat not included (just shown in pictures as example of use) Part Number : 54014

Part Number : 4480 Table Pedestal - 316 Stainless Steel

Surface Mount for SS Pedestal Includes top and bottom plates for fixing to the underside of your table top and flush mounting Dimensions: to the floor. Diameter 163mm Suits pedestal tube diameter 50mm tapers Pedestal is completely removable. to 46mm Dimensions: Part Number : 4484S Height from floor to underside of table 690mm Pedestal tube diameter 60mm Required depth under floor surface 45mm Flush Mount for SS Pedestal Part Number : 4484 Dimensions: Diameter 162mm Suits pedestal tube diameter 50mm tapers to 46mm Required depth under floor surface 45mm

Part Number : 4484F 333 Seats & Tables - Tables & Pedestals

Round Table Top & Pedestal Swivel Table Frame

Round Table complete with anodised pedestal and surface mount The versatile space-saving Swivel Table Frame. Everything you base attachment. Pedestal screws into the base and can easily be need to mount your existing table top onto and give yourself removed. extra space. Low profile base screws to the floor and remains when pedestal removed. 1 x Table Frame 1 x Mount plate Two models available with either surface or flush mounts. 1 x Backing Plate to use behind the bench seat frame. Stainless steel nuts and bolts. *Non corrosive aluminium pedestal Screws to mount your Table top onto the frame. *Drink Holders *Easily stowed Part Number : 4492

Table height on Pedestal: 720mm Flush mounts (requires 45mm depth)

Square / Rectangular Table Top Part Numbers : 4496RF - Flush mount 700 (L) X 4496RS - Surface mount 500mm (W)

Pedestal sold separately

Part Number : 4496SQ Oval Table & Pedestal - Flush Mount Adjustable Height

Oval shaped table complete with anodised pedestal and flush Table Pedestal mount base attachment. Pedestal sits inside flush base mount and can easily be removed. Telescopic 400-730mm Table has four inserts for drink holders. Requires mounting depth below floor. Pedestal only.

*Non corrosive aluminium pedestal Part Number : 4498 *Drink Holders *Easily stowed Flush style mount for Pedestal base Table height on Pedestal: 720mm “Flush” mounts into the floor and Table Pedestal screws into this Table dimensions: 610mm x base. 460mm Part Number : 4501 Part Number : 4490F

Surface mount for Pedestal base Stainless Steel Table Bracket Mount onto the bottom of your table and screw onto the pedestal. Dimensions: 300 x 165 x 25mm Part Number : 4502

Part Number : 54016

334

Trailer Components

337. Jockey 340. Trailer 346. Trailer Wheels Accessories Winches

Jockey Wheel CP15SH Winch 15-1 Reduction - CPW15 Jockey Wheel CP14SH MaXtek Bearing Protectors S/S Winch 5-1 Reduction - CPW5 Jockey Wheel CP14S (pair) Winch 1-1 Direct - CPW1 Jockey Wheel CP2 Tow Ball 1-7/8” Winch 10-1 Reduction - CPW10 Jockey Wheel - Lalizas Camco Wheel Chock with Rope Winch 3-1 Reduction - CPW3 Jockey Wheel CP15S Hella DuraLed Cab Marker/ Winch Handle - Spare Jockey Wheel - Supplementary Side Indicator Winch 3:1 Reduction with 4.5m Clamp On CP14 Hella DuraLed Front End Outline Nylon Strap Jockey Wheel CP6S Lamp Jockey Wheel CP1S LED Waterproof Trailer Light Jockey Wheel Fixed CP3 Outboard Flag Jockey Wheel Fixed CP7 Tarp Clamps Trailer Connector Female Trailer Connector Male 338. Stoltz Trailer Nylon Strap Rollers Winch Wire / Cable

Stoltz Trailer Roller RP-8 Stoltz Trailer Keel Roller RP-10 342. Trojan Trailer Stoltz Trailer Keel Roller RP-12 Accessories Stoltz Anchor Roller RP444 Stoltz RP404 Vee Bow Stop Trojan Defender Wheel Clamps Stoltz RP-3 Vee Bow Stop Trojan Jockey Wheel Trojan Bearing Boss – Stainless Steel 339. Trailer Rollers Trojan LED submersible Combination Lights – Multi volt Snubber - Vee Bow Chock Trojan LED Marker Light – Multi Snubber - Vee Bow Chock - 100mm volt 3” Bow Roller - Yellow Poly Vinyl Plug Holder 4” Bow Roller - Yellow Poly Vinyl Trojan Winch Ropes 3” Bow Roller - Black Rubber Trojan Safety Chain Kits Spool Roller – Black – 100mm x Trojan Level Coupling - 2000kg 75mm capacity Spool Roller – Yellow – 100mm x Trojan Duofit Coupling - 2500kg 69mm capacity Keel Roller – Black – 185mm x Mudguards – Galvanised steel 85mm Mudguards – Plastic Snubber - Cotton Reel Style Bow Trojan Towballs Chock Trojan Duo-Balls Self-Centring Keel Roller– Yellow – Trojan Chain Mate 290mm x 75mm Trojan Chrome Towball Covers Side Guide Roller Trojan Rubber Shin Protectors

336 Trailer Components - Jockey Wheels

Jockey Wheel Jockey Wheel CP15S

CP15SH * Swivel Type Twin Wheel * 300X4 Pneumatic Wheels * Swivel Type Twin Wheel * Full 300mm Adjustment * 250X4 Solid Rubber Wheels * 440KG Capacity * Full 250mm Adjustment * 500KG Capacity Part Number : 8418

Part Number : 8418-SH Jockey Wheel - Jockey Wheel CP14SH Clamp On CP14 * Swivel Type * 250X4 Solid Rubber Wheel * Swivel Type * Full 300mm Adjustment * 250X4 Solid Rubber Wheel * 250KG Capacity * 250mm adjustment * 220KG Capacity Part Number : 8416-SH Part Number : 8419

Jockey Wheel CP14S Jockey Wheel CP6S

* Swivel Type * Swivel Type * 250X4 Solid Rubber Wheel * 300X4 Pneumatic Wheel * 250mm Adjustment * 250mm Adjustment * 220KG Capacity * 220KG Capacity

Part Number : 8416 Part Number : 8405

Jockey Wheel CP2 Jockey Wheel CP1S

* Swivel Type * Swivel Type * 150 x 50mm Solid rubber wheel * 250X4 Pneumatic Wheel * 250mm Adjustment * 250mm Adjustment * 150KG Capacity * 150KG Capacity

Part Number : 8414 Part Number : 8415

Jockey Wheel Fixed CP7 Jockey Wheel Fixed CP3 * Wheel and Yoke * Wheel and Yoke * 6X2 Solid Rubber Wheel * 300X4 Pneumatic Wheel * 150KG Capacity * 220KG Capacity * With Butterfly and Pin * With Butterfly and Pin

Part Number : 8417 Part Number : 8406

Jockey Wheel - Lalizas

* 250mm Adjustment * 200 x 50mm Solid Rubber Wheel * 360KG Capacity

Part Number : 99634 337 Trailer Components - Trailer Rollers & Accessories Stoltz Rollers

Insist on Stoltz Rollers on your boat trailer! Don’t put up with ugly marks on the hull of your boat.

Stoltz Boat Trailer Rollers and Bow Stops are the highest quality poly rollers on the market. MADE IN THE USA and manufactured for long lasting performance and to protect your boat and keep the hull looking new! Stoltz Boat Trailer Rollers use High Quality Materials in production to prevent discoloration, weather cracking, and marking up your boat hull. * Guaranteed to outlast any other roller on the market * NEW U.V. stabilised formula * Polyurethane construction offers superior cut and abrasion resistance * Extremely cut resistant * Made in the USA

Trailer Roller RP-8 Trailer Keel Roller RP-10

Replacement roller for trailer keel roller assembly Replacement roller for trailer keel roller assembly

* Guaranteed to outlast any other roller on the market * Guaranteed to outlast any other roller on the market * NEW U.V. stabilised formula * NEW U.V. stabilised formula * Polyurethane construction offers superior cut and abrasion * Polyurethane construction offers superior cut and abrasion resistance resistance * Extremely cut resistant * Extremely cut resistant * Made in the USA * Made in the USA

Length: 203mm (8”) Length: 254mm (10”) 15mm shaft (5/8”) 15mm shaft (5/8”)

Part Number : 11024 Part Number : 11023

Trailer Keel Roller RP-12 Anchor Roller RP444

Replacement roller for trailer keel roller assembly * Guaranteed to outlast any other roller on the market * NEW U.V. stabilised formula * Guaranteed to outlast any other roller on the market * Polyurethane construction offers superior cut and abrasion * NEW U.V. stabilised formula resistance * Polyurethane construction offers superior cut and abrasion * Extremely cut resistant resistance * Made in the USA * Extremely cut resistant * Made in the USA 100mm width x 80mm diameter Length: 305mm (12”) 1/2 inch shaft 15mm shaft (5/8”) Part Number : 11021 Part Number : 11026 RP404 Vee Bow Stop RP-3 Vee Bow Stop

Stoltz Vee Bow Stop fits 100mm wide bracket Stoltz Vee Bow Stop fits 75mm wide racket

* Guaranteed to outlast any other roller on the market * Guaranteed to outlast any other roller on the market * NEW U.V. stabilised formula * NEW U.V. stabilised formula * Polyurethane construction offers superior cut and abrasion * Polyurethane construction offers superior cut and abrasion resistance resistance * Extremely cut resistant * Extremely cut resistant * Made in the USA * Made in the USA

12mm shaft 12mm shaft Fits 100mm bracket (4”) Fits 75mm racket (3”)

Part Number : 11025 Part Number : 11022 338 Trailer Components - Trailer Rollers & Accessories

Snubber - Vee Bow Chock Snubber - Vee Bow Chock - 100mm

Hard Wearing, Non Marking, Black Rubber Hard Wearing, Non Marking, Black Rubber

Jaw Opening: Approx 70º Length: 100mm Width: 100mm Base Footprint: 150mm x 50mm 12mm hole - designed to suit 1/2” Bolt Hole Centres: 35mm x 128mm diameter pin

Part Number : N15 Part Number : N20

3” Bow Roller - Yellow Poly Vinyl 3” Bow Roller - Black Rubber

75mm width x 77mm width x 75mm diameter 75mm diameter 1/2 inch shaft Part Number : N21 Part Number : N32

4” Bow Roller - Yellow Poly Vinyl Snubber - Cotton Reel Style Bow Chock 100mm width x 95mm diameter Hard Wearing, Non Marking, Black Rubber 1/2 inch shaft Width: 75mm Part Number : N30 Outer Diameter: 98mm Inner Diameter: 32mm Bolt Hole: 12.7mm Spool Roller – Yellow – 100mm x 69mm Part Number : N14 Hard Wearing, Non Marking Poly Vinyl

Length: 100mm Spool Roller – Black – 100mm x 75mm Overall Diameter: 96mm 15mm hole - designed to suit 5/8” Hard Wearing, Non Marking, Black Rubber diameter pin Length: 100mm Part Number : N34 Overall Diameter: 75mm 12mm hole - designed to suit 1/2” Keel Roller – Black – 185mm x 85mm diameter pin

Hard Wearing, Non Marking, Black Rubber Part Number : N24

Length: 185mm Overall Diameter: 85mm 15mm hole - designed to suit 5/8” Self-Centring Keel Roller– Yellow – diameter pin 290mm x 75mm Part Number : N28 Hard Wearing, Non Marking Poly Vinyl Side Guide Roller Length: 290mm Hard Wearing, Non Marking, Black Rubber Overall Diameter: 75mm 15mm hole - designed to suit Length: 230mm 5/8” diameter pin Width: 50mm Bolt Hole: 12.7mm Part Number : N36

Part Number : N26 339 Trailer Components - Accessories

MaXtek Bearing Protectors S/S (pair)

Stainless Steel Wheel Bearing Protectors

An excellent buddy for your trailer bearings. Simply remove the grease cap with a tap of a hammer and replace with these protectors in its place.

Use a grease gun and pump the protector full of grease. The protector creates positive pressure inside the bearing so that salt water cannot leak in and contaminate the bearing. Supplied as a pair.

Features: *Easy to install *Stainless Steel construction *Eliminate premature bearing failure from salt water entry

Part Numbers : 8410 8410-BP (Blister Packed)

Tow Ball 1-7/8” Camco Wheel Chock with

Tow Ball 1-7/8” with a 3/4” Bolt Rope Rated Capacity: 2000kg Ideal for Campervans Trailer RV ‘s Part Number : 57552 and boats. Made in the USA

Part Number : WHEELCHOCK

Hella DuraLed Cab Marker/ Hella DuraLed Front End Outline Lamp

Supplementary Side Indicator Ultra high impact resistant surface mount amber LED front marker lamp.Black plastic housing. Optic appears clear until illuminated. Surface mount amber cab marker or supplementary side indicator Pre-wired with 500mm of cable. LED lamp. Complies with ADR. Black plastic housing. Optic appears clear until illuminated. Suitable for both 12 volt and 24 Reverse polarity and transient volt systems and uses less then spike circuit protecttion. 1 Watt. Pre-wired with 500mm of cable. Complies with ADR. Dimensions: 60mm (L) x 38mm (W) x 32mm (D) Suitable for both 12 volt and 24 volt systems and uses less then 1 Watt. Part Number : H2051GMD

Dimensions: 60mm (L) x 38mm (W) x 32mm (D)

Part Number : H2026

340 Trailer Components - Accessories LED Waterproof Trailer Light

High visibilty trailer lights for use on trailers and trucks. This light offers exceptional visibility, good physical size and offers a long life solution to your trailer lights.

Never replace a bulb again!

Multi-function Stop - Tail - Indicator - Reverse

Easy to install with mounting hardware supplied.

Features * 72 LED’s, Thats 144 per pair * Shockproof * Multi Voltage - 12 - 24v * Fully waterproof and submersible * Low Power consumption * Electronics encapulated with resin * Long Life * CE Rated

Part Number : 90006 Outboard Flag Tarp Clamps

Fluro Orange Outboard flag Rugged composite clip with Optional LED Light for night time towing. heavy-duty spring and bungee cord. Ingenious design grips Part Numbers : tarps and sheeting tight without OF (Outboard flag) the need to locate rope eyes. OFL (Outboard flag + LED light) The tighter the clip is pulled the tighter it grips. Simple to release Suitable for use on boats, trucks, trailers, farm and garden.

Part Number : 70206 Trailer Connector Female Trailer Connector Male

Replacement 7 pin Female Trailer plug for connection to vehicle Standard replacement 7 Pin Male Trailer plug for connection to and trailer. trailesr.

Part Number : 31341 Part Number : 31340

Winch Strap Winch Wire / Cable

Loading: 2000 Kgs Replacement Winch Wire / Cable for a Trailer Boat Winch. Width: 50 mm Made in NZ using premium grade wire and NZ made Part Numbers : U hooks. 99093 - 6m 99094 - 7.5m Part Numbers : (dia x length) 9142 - 4mm x 5m 9143 - 4mm x 6m 9144 - 4mm x 7.5m 9145 - 5mm x 5m 9146 - 5mm x 6m 9147 - 5mm x 7.5m

341 Trailer Components - Trojan Trailer Accessories

342 Trailer Components - Trojan Trailer Accessories

343 Trailer Components - Trojan Trailer Accessories

344 Trailer Components - Trojan Trailer Accessories

345 Trailer Components - Trailer Winches

Winch 15-1 Reduction - CPW15 Winch 10-1 Reduction - CPW10

* Winch 15-1 and 5-1 * Winch 10-1 and 5-1 * EXTRA heavy Duty * Heavy Duty * 2 x Handles * 2 x Handles * Ideal for Larger Craft * Suit Larger Craft * Max Pull 1650KG * Max Pull 1150KG

Part Number : 9132 Part Number : 9130

Winch 5-1 Reduction - CPW5 Winch 3-1 Reduction - CPW3

* Winch 5-1 and 1-1 * Winch 3-1 * Medium Zinc Plated * Small Zinc Plated * Built for Long Life * For Light Craft * For Craft 14FT-19FT * Up to 14ft Length * Max Pull 750KG * Max Pull 450KG

Part Number : 9125 Part Number : 9123

Winch 1-1 Direct - CPW1 Winch Handle - Spare

* Winch 1-1 * Replacement handle * Small Zinc Plated for trailer winches. * For Small Craft * Max Pull 260KG Part Number : 9131

Part Number : 9121

Winch 3:1 Reduction with 4.5m Nylon Strap

Ideal trailer winch for small craft including dinghy’s and jetskis. One way ratchet which can be disengaged for winding out. Nylon strap offers the best solution to haul your boat on to your trailer by far. - Easy on the hands - Run through your hands when retrieving your boat; no wires to cut and dig into your flesh

Features * Zinc Plated to resist against corrosion * Solid gear construction * Internally lubricated drum and pinion gear bushings * Smooth moulded winch handle * Formed reinforcements in frame for added strength * 360kg (850lb) Capacity * 3:1 gear ratio * 5 mounting holes within plate for easy mounting options

Dimensions Strap length: 4.5m Base plate 95mm (l) x 85mm (w)

Part Number : 63501-NB 346

Trim Tabs

349. Lenco Trim Tab Kits

Lenco Trim Tabs Trailer Boat Sizes Lenco Standard Ram Kits Lenco Edgemount Kits Lenco Short Ram Kits

350. Lenco Actuators

Lenco 101 Standard Actuator Lenco 101 XDS (Short) Actuator Lenco 102 XD (Extended) Actuator

351. Lenco Switches & Auto Glide Boat Leveling System

Lenco Up/Down Switch Panel with LED Indicators Lenco Auto Glide™System Lenco Up/Down Switch Panel with Auto Retract Lenco Up/Down Switch Panel - OEM Style

348 Lenco Trim Tabs - Trim Tab Kits Lenco Trim Tabs

Trim Tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power and trim

• Instant response electric actuators for precise control • Self locking ballscrew will not drift even when backing • 12-guage (2.6mm) laser cut stainless steel trim tab planes • High impact corrosion-proof mounts look great through years of abuse • Clean, time and space saving installation • LED indicators are optional

Sizes available to for boats 14’ right up to 99 foot! With Lenco there are options to suit almost all applications.

Trailer Boat Sizes Lenco Standard Ram Kits For most boats 5 to 8m with a standard transom the Lenco 9”x 12” are suitable. These are our most popular Trim Tab kits and are suited for boats 5 to 8m with a standard transom such as a Surtees boat. Each kit includes: * 12-volt actuators (2) with 6 foot leads Kit Part Numbers : * Stainless steel trim tab blades (2) 5602 - 9” (length) x 12” (width) basic kit * 20’ actuator extension harnesses (2) 5604 - 9” (length) x 12” (width) kit with auto retract * Upper mounting bracket with gland seal 5643 - 9” (length) x 12” (width) kit with LED indicators * Lower mounting bracket * All stainless steel mounting hardware * Switching is as supplied per product listing

Lenco Edgemount Kits Lenco Short Ram Kits

These kits have our standard ram setup with edge mounted plates These kits have a slightly shorter ram setup which help when you that are suited for low transom boats. have limited space on your transom.

Ideal for all boats with a low transom height such as Challenger The 9” x 12” plate size is used with most boats in the 5 to 8 metre Boats. (See image below) range.

Kit Part Numbers : Ideal for all boats with portofino transom for example buccaneer 5615 - 12” (length) x 9” (width) edgemount - auto retract boats , and some Bluefin boats. (See Buccaneer image below) 5615LED - 12” (length) x 9” (width) edgemount - LED indicators Kit Part Numbers : 5645 - 9” x 12” Trim Tab Kit - Short Ram with auto retract 5646 - 9” x 12” Trim Tab Kit - Short Ram with LED indicators

349 Lenco Trim Tabs - Lenco Actuators Lenco 101 Standard Actuator

Standard replacement actuator / ram to suit most standard lenco trim tab kits.

The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.

Stroke travel: 57mm Overall length tip to tip when retracted: 30.80cm Cable length supplied: 1.8m

The entire Lenco Actuator is fully submersible, maintenance free and sealed for life. Lenco trim tabs and switches carry a 3-year limited warranty from the date of original purchase.

Part Numbers : 5623 - (12V Actuator) 5623-24 - (24V Actuator)

Lenco 101 XDS (Short) Actuator

This is the shortest Actuator Lenco manufacture.

The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.

Stroke: 57mm Length overall: 10-7/8” (27.62 cm) Length pin to pin: 10-1/4” (26.03cm) Diameter (upper housing): 2-1/2” (6.35mm)

The entire Lenco Actuator is fully submersible, maintenance free and sealed for life. Lenco trim tabs and switches carry a 3-year limited warranty from the date of original purchase.

Part Numbers : 5617 - (12V Actuator) 5617-24 - (24V Actuator)

Lenco 102 XD (Extended) Actuator

This is the Extended Actuator with the Lenco range.

The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.

Stroke: 108mm Length overall: 12-7/8” (32.70 cm) Length pin to pin: 12-1/4” (31.11 cm) Diameter (upper housing): 2-1/2” (6.35 cm) Mounting hardware: 5/16” (7.9 mm)

The entire Lenco Actuator is fully submersible, maintenance free and sealed for life. Lenco trim tabs and switches carry a 3-year limited warranty from the date of original purchase.

Part Numbers : 5617 - (12V Actuator) 5617-24 - (24V Actuator)

350 Lenco Trim Tabs - Switches & Auto Glide System

Lenco Up/Down Switch Panel with Lenco Up/Down Switch Panel with LED Indicators Auto Retract

Clearly displays the Trim Tab Tactile switch panel for Lenco position with LEDs. Trim Tabs.

* Includes Auto Retract * Includes Auto-Retract

Part Numbers : Part Numbers : 5683 - Complete (Switch 5635RP - Complete (Switch Panel and control box) Panel and control box) 5684 - LED Up/Down Switch 5634 - Up/Down Switch Panel Panel (requires control box) (requires control box) 5682 - Electronic controller box (for use with 5684 switch panel) 5681 - Electronic controller box (for use with 5634 switch panel only)

Lenco Up/Down Switch Panel - OEM Style

These switches are in line with trim motor and switch the load directly without any additional controller.

Rated current: 20Amps

Part Number : 5635

Lenco Auto Glide™System

The Auto Glide uses engine data and GPS data to drive your boat to the most efficient running angle by adjusting your Lenco trim tabs as needed. This optimum running angle is determined during the set up process upon the installation of your Auto Glide system.

Your boat’s running angle is measured 25 times per second and this data is used by the new Auto Glide control box to:

* Automatically puts your boat in the most efficient running angle. * Reduce the amount of bow rise of your boat during hole shot mode. * Eliminate bow porpoising (bow bounce). * Keep your boat level at all times. * Adjusts to changing sea conditions automatically * Reads Smartcraft, NMEA 2000 & J1939 data

These actions will result in a smoother ride and the best possible fuel efficiency.

The Auto Glide Control Box consists of gyroscopes, accelerometers, and new, very sophisticated, and patented software.

The Auto Glide has 3 automatic operational modes, 4 automatic settings, and 2 manual operational modes. Although you will most keep your Auto Glide in automatic mode, you may immediately convert to manual mode simply by pressing one of the 4 up/down buttons on the key pad.

Part Numbers : 5600 - Upgrade existing Lenco Trim Tab system to Auto Glide System 5604AG - Auto Glide Kit complete with 9” x 12” Standard planes 5615AG - Auto Glide Kit complete with 9” x 12” Egdemount planes

351

Wipers

354. Speich 358. Wiper Wipers Switches

Speich Nautic Type E Wiper Motor Wiper Speed / Interval Controller - Torque 10Nm Wiper Switch - 2 Speed + Park Speich Nautic Clearview Screens Wiper Switch - 12 Volt Speich Pantograph Arm 95P Speich Manual Wiper Control Speich Pendulum Wiper Arm 95F Speich Wiper Blades 359. Washer Systems

356. Wiper Wexco Washer Tank & 12V Pump Motors 2.5 Litre Washer Tank & 12V Pump Washer Hose for Wiper Systems TMC Wiper Motors with Cover Speich Spray Nozzle Wexco Wiper Motor - 12V Speich Thru Bulkhead Fitting High Torque Marine Wiper Motor Female Tube Joiner for Spray Hose - 12V Male Tube Joiner for Spray Hose Lubafe Wiper Motor - 12V 1.7 l Washer Tank & 12V Pump 6V Windscreen Wiper Motor 1.45 Litre Washer Tank & 12V Pump 12 Volt Self Park Wiper Motor Speich Electro Valve for Washers T-Piece Tube Joiner for Spray Hose L-Piece Tube Joiner for Spray Hose Straight Tube Joiner for Spray Hose 357. Wiper Blades & Arms

TMC Pantograph Wiper Arm TMC Wiper Blade Wexco Wiper Blade Wexco Pantograph Wiper Arm TMC Pendulum Wiper Arm TMC Wiper Blade - Stainless Steel AAA Wiper Arm - Bayonet AAA Wiper Blade - Bayonet Manual Wiper Control with 14” Arm & Blade Manual Windscreen Wiper Control

353 Wipers - Speich Wipers

Speich has been operating in the maritime and nautical sector since 1938, when the first clear view screen was patented.

Over the years the company has specialised in production of high quality windscreen wiper systems specifically designed for the professional Mariner. * Supplier to the Navy & Coastguard * Strict quality assurance system in accordance with the standard: UNIX-ISO 9001:2000; RINA approved * Suppliers to the world’s best boat builders including Haines Hunter( NZ), Rayglass, Riviera, Whitepointer * “SPEICH Nautic”, specially designed for small craft * High torque motors available up to 80NM * Motors and wiper arm components are all manufactured from 316 marine grade stainless steel Speich Nautic Type E Wiper Motor - Torque 12Nm

These Speich Wiper Motors are available in 12V or 24V DC, have two speeds, a self-parking mechanism and variable wiping angle. Italian Made - Excellent Quality

Available in several shaft length options: 38mm shaft suits 5mm-12mm wall thickness 64mm shaft suits 15mm-35mm wall thickness 90mm shaft suits 38mm-60mm wall thickness

Installation Note: The motor axle must be perpendicular to the glass surface. Insert a block if required. The motor unit can be installed above or below the window and can be positioned at any angle around its axle.

*Two Speeds: v1 = 35 and v2 = 55 stroke/min *Power Consumption: 35W (v1) - 40W (v2) *Starting Power: 100W (v1) - 110W (v2) *Self-parking on either left or right side. *Adjustable wiping angles to suit application (from 45 º to 110º)

Part Numbers : 4554 - 12 Volt with 38mm shaft (5mm-12mm wall thickness) 4580 - 24 Volt with 38mm shaft (5mm-12mm wall thickness) 4555 - 12 Volt with 64mm shaft (15mm-35mm wall thickness) 4556 - 24 Volt with 64mm shaft (15mm-35mm wall thickness) 4558 - 12 Volt with 90mm shaft (38mm-60mm wall thickness) Speich Pantograph Arm 95P Speich Pendulum Wiper Arm 95F

316 Stainless Steel pendulum wiper arm. Adjustable arm length up to 500mm 316 Stainless Steel pantograph wiper arm. Shaft Ø16mm and pivot Ø14mm Adjustable arm length, supplied in the maximum length of 550mm Part Numbers : Shaft Ø16mm and pivot Ø14mm 4557 4557-ZZ (with spray nozzle) Part Numbers : 4551 4551-ZZ (with spray nozzle) Speich Wiper Blades

Speich Manual Wiper Control Speich Wiper Blades have 7mm bayonet fastenings.

Manual wiper actuator for wall thickness up to 35mm Shaft diameter 16mm

Made in Europe High quality. Part Numbers : Blades and arm extra 4567 - 280mm 4565 - 450mm 4568 - 330mm 4566 - 500mm Part Number : EMAN 4564 - 400mm 354 Wipers -Clearview Screens

Speich Nautic Clearview Screens

First produced in 1938, the SPEICH Clearview screen is a high technology product, carefully engineered in all it’s details and designed according to ISO 3904. Many decades of field experience and constant technical improvements have made the SPEICH Clear view screen extremely reliable and durable even under the severe environment conditions.

Tens of thousand units have been supplied all over the world and are installed on all kind of merchant and military ships, yachts and tugboats.

Schematically, SPEICH Clearview screen keeps a glass disk free from rain, snow or sea-water by fast rotation. The motor is placed in the centre and is fastened to the fixed glass so as to obtain the largest possible field of vision. This particular assembly also makes the unit water and airtight, thus making it suitable for pressurised and air-conditioning bridges. The rotating glass is hardened and optically rectified to avoid any optical distortion. The electric motor is available for many tensions; the rotor is tropicalized and turns on silent ball-bearings.

All metal parts are made of brass; a specially designed manifold between the ring surrounding the rotating glass and the fixed frame keeps water from entering the space between the fixed and rotating glass. This space can optionally be heated by electric resistance to avoid condensation and ice formation, which could prevent proper operation.

This unit is designed to be installed in a circular hole cut in a glass, wood, acrylic or metal surface (1). The hole diameter is indicated in the table below. The unit is assembled by flange and counterring (5), made airtight by neoprene gasket. The fixed hardened glass disk supports the motor (4) which rotates the optically rectified glass disk. On request the unit is supplied with a heating element (6) to prevent condensation and formation of ice. Metal parts are turned and can be chrome plated on request.

Dimensions and weight type EX

Type A B C Weight EX38S 380 mm 436 mm 421 mm 15.5 kg EX1S 350 mm 406 mm 391 mm 14.5 Kg EX2S 300 mm 356 mm 341 mm 12.5 Kg

For more information on price and availability please contact us.

355 Wipers - Wiper Motors

TMC Wiper Motors with Cover Wexco Wiper Motor - 12V

12 Volt or 24 Volt Power 12 Volt Options. Interchangeable Sweep Angles of 40º/50º/60º/70º/80º/90º/1 Interchangeable 00º/110º Sweep Angles of 2 Speeds with Self-Parking. 83º/100º/110º/120 º 1/2” Drum Pivot 2 Speeds with Self-Parking. Dimensions: LxWxH Part Number : 4537 (208x112x66mm)

Part Numbers : 4592 - 12 Volt, 1” Shaft 4593 - 24 Volt, 1” Shaft 4594 - 12 Volt, 2” Shaft 4595 - 24 Volt, 2” Shaft

Lubafe Wiper Motor - 12V High Torque Marine Wiper Motor - 12V

2 Speed with Park Interchangeable Sweep Angles of Working angle can be 83º/100º/110º/120 º set at 45°/60°/80°/110° 2 Speeds with Part Number : Self-Parking. 16650 - 1” Shaft Dimensions: LxWxH (197x101x51.4mm)

Part Numbers : 6V Windscreen Wiper Motor 4592NC - 1” Shaft 4594NC - 2” Shaft

6 Volt Stainless Steel Self-Park Wiper Motor. Replica used in vintage cars and hot rods.

1932-1939 FORD Windshield wiper motor 12 Volt Self Park Wiper Motor replacement Single Speed - Self Parking The shaft can be shortened to suit application. (Instructions included) Shaft length: 55mm (Thread 42mm Working Angle: 110° Nut & washer 11mm) Shaft length: 127mm Shaft thread Dia: 9mm Thread Length: 42mm Part Numbers : 16500-12 (83 degree working angle) 16501-12 (90 degree working angle) Part Number : 16501-06

356 Wipers - Wiper Blades & Wiper Arms

TMC Pantograph Wiper Arm TMC Pendulum Wiper Arm

Dual Arm with 7mm 7mm Bayonet type fitting Bayonet fitting Length can be adjusted Adjustable Length Shaft Ø14mm Shaft Ø14mm

Part Number : Part Numbers : 4608 - (270-365mm length) 4609 - (330-425mm length) 4607 - (345-440mm length) 4610 - (398-475mm length) 4611 - (470-550mm length)

Wexco Pantograph Wiper Arm Wexco Wiper Blade

Dual Arm with adjustable Length 460-560mm Design allows blade to curve to window shape. 1/2” Drum pivot Made of 304 Stainless steel. Length: 500mm Part Numbers : 4534 Universal Fit (9x3 hook, 9x4 hook, 3/16” pin, 1/4” pin, bayonet)

Part Number : 4536

TMC Wiper TMC Wiper Blade - Stainless Steel

Blade Stainless Steel holder.

Design allows blade to curve 7mm Bayonet to window shape. Connection

7mm Bayonet Connection Part Numbers : 4615 - 280mm Part Numbers : 4616 - 355mm 4618 - 280mm 4617 - 405mm 4619 - 355mm 4620 - 405mm 4621 - 457mm

AAA Wiper Arm - Bayonet AAA Wiper Blade - Bayonet

Wiper Arm with 5mm Wiper Blade with 5mm bayonet connection for bayonet connection blade Suits 16582 arms Part Numbers : 16582-11 (11” long) Part Numbers : 16582-14 (14” long) 16592-11 (11” long) 16592-14 (14” long)

357 Wipers - Wiper Switches

Wiper Speed / Interval Controller Manual Wiper Control with 14”

Often called a CT41 or CT42 Wiper Control Switch. Arm & Blade

* Two speed control: Slow speed, Fast speed Part Number : MANWIPE14 * 3 interval delays - 2s, 4s, 8s * Washer control * Dimmer input * Standard switch cut-out. *Made in Europe *Voltage - 12v or 24V

Part Numbers : 4569 (controls 1 motor) Manual Windscreen Wiper Control 4570 (controls 2 motors) Suits 16580 ,16582 arms & blades 16590 ,16592

Max wall thickness: 25mm

Part Number : MANWIPE Wiper Switch - 2 Speed + Park

For controlling a 2 Speed wiper motor.

Selects high speed or low speed and Park function. Wexco Washer Tank & 12V Pump

Wiring Pin Connections: Part Numbers : 1: Fast Speed 4545 - 1.9 (1.9 Litre tank) 2: + in (to park) 4545 - 3.8 (3.8 Litre tank) 3: Slow Speed 7: Light - (negative) 8: Light + (positive)

Part Numbers : 4571 (12 Volt) 4573 (24 Volt)

Wiper Switch - 12 Volt

For controlling a 2 Speed wiper motor . Selects high speed or low speed and Park function.

15 Amp Max

Wiring Pin Connections: 1: Fast Speed 3: Slow Speed 5: Line + 6: Park

Part Number : 4582

358 Wipers - Washer Systems

2.5 Litre Washer Tank & 12V Pump 1.7 l Washer Tank & 12V Pump

230(H) X 127(W) X 153mm (Depth including pump) Horizontal washer tank (100mm Depth tank only) reservoir holds 1.7 litres and comes with 12 volt pump, Includes: wiring leads T-piece and PVC Mounting Bracket Tubing. 1m hose & T piece Part Number : 4545-1.7 Part Number : 4545-2.5 1.45 Litre Washer Tank

Washer Hose for Wiper Systems & 12V Pump

6mm OD/4mm ID hose Dimensions: 215(H) x 137(W) x 95mm(Depth including pump) Sold per metre 12 volt pump, T-piece & 1.5m PVC Part Number : ZZ-WH Tubing.

Part Number : 4545-1.45 Speich Spray Nozzle Speich Electro Valve for Washers Chrome plated brass. 12V Solenoid for 5-35mm panel thickness. Pressurised washer 10mm diameter drill hole systems.

Designed for use with fresh water or washer Rated for 0-9 Bar (0-130psi) fluid Made in Italy & CE rated. Part Number : 4589 Part Number : ZZ-SOLENOID Speich Thru Bulkhead Fitting T-Piece Tube Joiner for Spray Hose Stainless Steel & Chrome For up to 40mm Bulkhead. Suits 6mm OD/4mm ID hose. 10mm Drilling Hole Suits 6mm OD/4mm ID hose Part Number : ZZ-IAT

Part Number : ZZ-BF

Female Tube Joiner L-Piece Tube Joiner for Spray Hose for Spray Hose Suits 6mm OD/4mm ID hose.

Suits 6mm OD/4mm ID hose. Part Number : ZZ-IAL Part Number : ZZ-IAF

Male Tube Joiner Straight Tube Joiner for Spray Hose for Spray Hose Suits 6mm OD/4mm ID hose.

Suits 6mm OD/4mm ID hose. Part Number : ZZ-IAD Part Number : ZZ-IAM

359 Absolute Marine

PO Box 58773, Botany, Auckland 2163, Auckland, New Zealand

Ph: 09 273 9273 Fax: 09 273 9099 Email: [email protected] Website: www.absolutemarine.co.nz

Catalogue 2011