Furniture Cabinets Design Ideas Design I36 1 2 3 2 4 4 10 Design Ideas Design 7 Door 7 Flat Screen Solution 2 Solution Screen Flat Modifications and Options Construction Flat Screen Solution 1 Solution Screen Flat 8 3 1 CrownMolding 6 5 Door 9 5 6 Base Board Base Cove • 3. Sta 3. • Furn 2. • TopWood KraftMaid 1. • • 7. Cro 7. • Cov 6. • Rep 5. • Des 4. • Kra 3. • Ent 2. • sides) to (applied ReplacementDoors 1. • re a *Build Matc •10. Cov 9. • Sing 8. • Furn 7. • Rep 6. • Woo 5. • Wall 4. • apply Matching Toe Kick. Recommend to recess 9˝. recess ToetoMatching Recommend apply Kick. (with RD2152 top door;flush sides) door;flush top RD2152 (with ck Molding ck ertainment Cabinet End Unit Unit End Cabinet ertainment ftMaid Wood TopWood ftMaid wn Molding wn k Drawer Cabinet (Wide Rail Plain) Rail (Wide Cabinet Drawer k lacement Door (apply one to each side) each to one (apply Door lacement lacement Door lacement e Leg (4) Leg e e Base Board Base e le Bead Edge (applied to front and side edges) side and front to (applied Edge Bead le itureShelf itureDrawer d Skin (apply one to each side) each to one (apply Skin d Cabinet hing Toe hing Kick* cessed toe kick platform for added support and support added for platform kick toe cessed Furniture Cabinets I37 r panel, applied to wall, behind TV. flushtoe kick platformfor addedsupport Cabinets (w/Butt doors; iture Shelves iture (pull forward 3/4˝) iture Shelves iture e Base Board e Base Board ity Cabinets (with Wide Rail Plain) e Base Board lacement lacement Door d Stock k Drawer Cabinet (Wide Rail Plain) ftMaid Wood Top (Finished BothftMaid Ends) Wood Top ssic MoldingCrown Design Ideas Reduced Depth to 18˝) Reduced Depth to 18˝) Increased Depth to 18˝)* Not intended for supporting TV. • 3. Cla • 4. Furn • 5. Soli • 6. Cov • 7. Skin o * Build a • 1. Utility cabinets (with Wide Rail Plain; • 2. Van • 3. Kra • 4. Furn • 5. Cov • 1. Utility cabinets (with Wide Rail Plain; • 2. Wall • 1. KraftMaid Wood Top • 2. Des • 3. Rep • 4. Cov 3 Cove Cove Base Board Cove Cove Base Board 1 2 1 7 1 Door Door Flat Screen Solution 5 Flat Screen Solution 4 Flat Screen Solution 3 6 5 2 5 3 3 Cove Cove Base Board 2 2 Classic Crown Molding 4 4 1 Door Cabinet Frame 4 1 Door Furniture Cabinets I38 Molding Large Cove Only Front Cabinet Shelf Furniture Peninsula Door Door Base Board Base Cove Molding Starter Large Frame Cabinet 1 Molding Starter 1 6 Molding Large Cove 5 1 2 7 5 2 6 4 7 Design Ideas Design 3 3 Hearth Solution 1 Solution Hearth 6 Solution Screen Flat Furniture Component System Component Furniture 4 2 6 4 Door Door Shelf Furniture 6 4 5 7 5 3 Edge Bead Single 8 9 Base Board Base Cove Cov 7. • hi 12˝ 6. • Fla 5. • Lar 4. • Lar 3. • Pen 2. • Cabinet Utility 1. • Sing 9. • Furn 8. • Cov 7. • Lar 6. • Sta 5. • Van 4. • Kra 3. • Wall 2. • Specs; TV fit to Depth (Reduced Wallcabinets 1. •

* • • • • • • • •

Build a 4 1/2˝ 4 1/2˝ a Build for support for Create your own furniture component systemfurniture component own Create your 1. using st using Ends) Furniture Plywood Ends) Furniturewith Plywood 7. 6. 5. 4. 3. 2. door) secure

t Panel ValancePanel t ge Cove Molding Cove ge Molding Starter ge ge Cove Molding Molding Cove ge rter Molding rter ftMaid Wood TopWood Ends) ftMaid Both (Finished insula Furniture insula Shelf e Base Board Base e ity Cabinets (with Wide Rail Plain; Plain; Rail Wide (with Cabinets ity e Base Board Base e le Bead Edge (applied to front of shelf) of front to (applied Edge Bead le itureShelf Cabinets gh Furniture Drawer (with Furniture Plywood Ends)* FurnitureFurniture(with gh Drawer Plywood andard wall and base cabinets base and wall andard Furnitur Furnitur ca Base Standa Furnitur Furnitur Center high platform under Furniture under Drawers platform high - rd wall cabinet wall rd - CFO (ins CFO binet with full with binet furniture end panel furnitureend CFO e valance e shelf e panel end e e panel e talled horizontally at 12˝ deep; deep; 12˝ at horizontally talled - heigh t doors t Furniture Cabinets I39 olding (above and below cabinets) sh sh toe kick platform under for support sh sh toe kick platform under for support Cove Cove Casing cabinets (Reduced Depth to 6; e Bead Edge (applied to edge of shelf) cabinets (Reduced Depth to 6; Skin Skin (cut skin to wall) Cabinet Plywood (with Furniture Ends) iture Shelf iture ture Shelf ture e Base Board e Valance d Stock e Base Board lacement lacement Door ge ge Federal Molding ge Starter Molding d Stock wn Valance ftMaid Wood Top ssic MoldingCrown ge ge Starter Molding ge ge Starter Molding ge Cove Molding Design Ideas Furniture Plywood Furniture Ends) Plywood Furniture Ends)* Plywood with Furniture Ends) Furniture Plywood Furniture Ends)* • 4. Wall • 5. Soli • 6. Cov • 7. Cov • 3. Small • 2. Lar • 3. Lar * Build a flu * Build a flu • 1. Utility Cabinet (Wide Rail Plain; • 2. Cla • 4. Furni • 5. Lar • 6. Wall • 7. Soli • 8. Cov • 1. cabinetsWall (Reduced Depth to 6˝; • 2. Wall • 3. Rep • 4. Kra • 5. Wall • 6. Cro • 7. Lar • 8. Lar • 9. Furn •10. Singl •11. Ogee M Wood • 1. Top Traditional

Classic Crown Molding Large Starter Molding Small Cove Cove Small Casing Cove Cove Base Board Cove Cove Base Board Furniture Furniture Shelf Large Starter Molding Large Starter Molding Large FederalLarge Molding 6” Door 5 6 Door 5 Door Furniture Shelves 2 1 Wall Wall Cabinet 8 Traditional Wood Top 4 Large Cove Large Molding Single Bead Edge 1 4 Hearth Solution 4 Hearth Solution 3 Hearth Hearth Solution 2 7 Materials by othersby Materials Cabinet Frame 2 2 3 3 2 3 Door 7 Classic Crown Molding 6 8 8 6 9 5 1 10 4 11 1 Furniture Cabinets I40 Spindle Roman Cabinet Utility Molding Large Cove Top Wood 6˝ Mantel Matching Hood Wall Light Rail Small Cove Shelf Furniture Molding Starter Large Solid Stock Molding Large Cove 1 4 4 5 6 1 Design Ideas Design 6 2 Hearth Solution 5 Solution Hearth Hearth Solution 6 Solution Hearth 7 8 3 2 3 Door 1 5 Board Base Cove • 3. Soli 3. • Lar 2. • TopWood KraftMaid 1. • Cov 8. • Sing 7. • Furn 6. • Lar 5. • Lar 4. • Cov 3. • Wall 2. • Plain; Rail (Wide Cabinet Utility 1. • • 6. Lar 6. • Sma 5. • Rom 4. • Furniture Plywood Ends; Reduced Depth to 6˝) to Depth Reduced Ends; Furniture Plywood ge Cove Molding (inverted) Molding Cove ge Molding Cove ge Molding Cove ge Molding Starter ge d Stock d e Base Board Base e Corbel e le Bead Edge Bead le ll Cove Light Rail Light Cove ll itureShelf an Spindles Spindles an Hood Mantle Matching Mantle Hood Furniture Cabinets I41 35” 30 ¾” 39 ¼” 43 ½” 36” 23 ¼” 27 ½” 31 ¾” D Design Ideas 18” 18” 18” 18” C 25 ⅜” 29 ⅝” 33 ⅞” 38 ⅛” A B Optional Wall 20 ⅜” 24 ⅝” 28 ⅞” 33 ⅛” C Diagonal Diagonal Installation of Standard Furniture Cabinets D 12” 12” 12” 12” 24” 30” 36” 18” Cabinet Width “A” Cabinet Width “B” Dimensions“C” Wall Dimensions “D” Wall CabinetDepth “B” Dimensions“C” Wall Dimensions “D” Wall