DOCSLIB.ORG

Woodworks® Walls Natural Variations™, Constants™, and Bamboo Woodworks® Walls Natural Variations™, Constants™, and Bamboo

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Woodworks® Walls Natural Variations™, Constants™, and Bamboo Woodworks® Walls Natural Variations™, Constants™, and Bamboo WOODWORKS® Walls Natural Variations™, Constants™, and Bamboo WOODWORKS® Walls Natural Variations™, Constants™, and Bamboo cloud friendly Visit Armstrong.com Photo Gallery to view more WoodWorks® Wall 24" x 48" (nominal) panels on Z-Clips and Ceiling 24" x 48" (nominal) panels with custom perforation installation photos (running parallel to the short side of the panel) in custom Vertical Grain Douglas Fir SEARCH: walls KEY SELECTION ATTRIBUTES ® • D efine a space with rich, natural FSC -certified wood • Perforated panel with acoustical backing improves sound • FSC chain of custody (CoC) certifiedW oodWorks products quality and reduces reverberation time within a space represent responsible production and consumption practices • Install panels horizontally or vertically using clips or splines from the forest to the consumer • Coordinate veneer choice with WoodWorks ceilings to create 90º • California Air Resources Board (CARB) compliant * angled or faceted ceiling-to-wall transitions ® • 100% Biobased content certified by the USDA BioPreferred • Custom veneer coordination and project assistance available; for Products program (preferred for government projects) details, contact TechLine at 1 877 ARMSTRONG ™ • Variety of standard wood species, stains, panel sizes, and • For unique solutions, contact the You Inspire Solutions Center at perforation options [email protected] VENEER SELECTION Due to printing limitations, shade may vary from actual product. Natural Variations™ (Real Wood Veneers) Bamboo (Veneer is Rapidly Renewable)** Beech (NBE) Maple (NMP) Light Cherry (NLC) Dark Cherry (NDC) Patina (BAP) Native (BAN) new new new Oak (NOK) Walnut (NWN) Walnut Espresso Custom (NWE) veneers available PERFORATION OPTIONS (Actual 1:6 scale shown) NOTE: Slotted perforations run parallel to the length of the panel. W1 W2 – Rg 6006 W3 – Rd 6006 W4 – Rg 6011 W5 – Lg 9512 W6 – Lg 9508 (Unperforated) (Round Straight) (Round Diagonal) (Round Straight) (Oval Straight Slotted) (Oval Straight Slotted) * Specified inTitle 17 California Code of Regulations For premium and custom veneer, stain, perforation, and size options, contact TechLine at Section 93120.2(a) Custom perforations 1 877 ARMSTRONG. ** Bamboo is a grass that only requires 3-7 years for maturity and does not have to be replanted after available each harvest. TechLineSM 877 ARMSTRONG armstrong.com/walls WOODWORKS® Walls Natural Variations™, Constants™, and Bamboo INSTALLATION OPtion 1 – Splines for complete system installation 1.875" Furring Strip Finish Molding Wall Spline Panel .25" 1.15" Finish Molding Wall Spline Panel .25" WoodWorks® Wall System 24" x 108" (nominal) panels with W6 perforation in Natural Variations™ Light Cherry; finish molding in Natural Variations Light Cherry INSTALLATION OPtion 2 – Z-Clips for panel installation 2' x 8' Panel Z-ClipZ-clip 2' x 6' Panel WoodWorks Wall panels on Z-Clips with W2 perforation in Custom Maple 2' x 4' Panel For panels 24" x 48" For panels For panels larger For panels 2' x 4' For panels between For panels larger WoodWorks Wall panels on Z-Clips with custom perforation in Constants™ Cherry and and(nominal) smaller, between2' x 4' and 24" 2' xx 48"8', thanthan 24" 2' xx 8', 96" custom trim anduse 4smaller, Z-clips and 24"use x 696" Z-clips (nominal), use(nominal), 8 Z-clips use four Z-Clips use six Z-Clips use eight Z-Clips TechLineSM 877 ARMSTRONG armstrong.com/walls T RecycleD Calculate LEED contribution at P U O 86% COntent armstrong.com/greengenie ® ® WOODWORKS Walls LEED ™ ™ rial e ign for for ign Natural Variations , Constants , and Bamboo ional urcing of of urcing cyclable/ cycled obased obased w emitting/w ghting ghting es SC o e e for wood) for materials F r ingredient reporting energy management construction mgmt waste materials d flexibility EPD r content s materials raw lo materials li acoustics extended extended resp. producer mat ( bi quality reg ▲ LOCATION DEPENDENT VISUAL SELECTION Item Dimensions (Inches) Perforation Installation Finish Number ◆ W x L x H Options Options Options FSC®-certified WOODWORKS® Wall Panel with Acoustical Fleece 5814 _ _ _ _ _ _ 23-3/4 x 47 x 3/4" W1, W2, W3, X (Z-Clip installation) See Colors on Front Page 5818 _ _ _ _ _ _ 23-3/4 x 95 x 3/4" W4, W5, W6 K ( Spline installation – See Colors on Front Page 4 panel sides kerfed) 5819 _ _ _ _ _ _ 23-3/4 x 107 x 3/4" See Colors on Front Page 5820 _ _ _ _ _ _ 23-3/4 x 119 x 3/4" ◆ When specifying or ordering, include the appropriate perforation, installation, and finish suffixes. NOTE: For veneers and sizes available as special order, call TechLine at 1 877 ARMSTRONG. EXAMPLE: 5814 W1 K NMP Panel Dimensions: Perforation: Installation: Finish: 24" x 48" panel Unperforated Spline installation Natural Variations™ – 4 sides kerfed Maple ACOUSTICAL PERFORMANCE Dots represent high level of performance. Perforation NRC Rating D Mounting D Mounting WoodWorks Walls align with the following ceiling panels: with Acoustical Fleece with 1" Fiberglass Backer** Perforation WoodWorks WoodWorks Vector® Concealed 32 10 1 RH DS W1 N/A N/A W2 Yes Yes W2 0.50 0.65 W3 Panel Type: Panel Height:YesSurface Type: Surface Color:Yes SS 85 10' Rhythms Desert Sand W3 0.50 0.65 W4 Yes No 0.80 W4 0.55 • W5 Yes No 0.70 W5 0.45 • W6 Yes No W6 0.45 0.60 ** Fiberglass Infill Panel Item 8200100 ACCESSORIES Wall Spline Wall Item Number Description Length Finish Material Installation 663910_ _◆ Wall Installation Spline 10' Black (BL) Aluminum Natural Anodized (NA) 6408 Edge Banding for Wall Spline 25' See Colors on Front Page PVC 5672 Z-Clip 2" – Aluminum 5673 Z-Clip Bar 6' – Aluminum ◆ W hen specifying or ordering, include the appropriate length and color suffix. EXAMPLE: 663910 N A – 10' Wall Installation Spline in Natural Anodized. Specify FastCap edge banding to mount to installation spline for a continuous wood look. Moldings 5855_ _ _◆ 4" Base Molding 8'- 4" See Colors on Front Page Solid Wood 5856_ _ _◆ 6" Base Molding 8'- 4" See Colors on Front Page Solid Wood 5849_ _ _ _ _◆ 1.15" Finish Molding 8'- 4" (08), 9'- 4" (09), or 10'-2" (10) See Colors on Front Page Solid Wood 5907_ _ _ _ _◆ 1.875" Finish Molding 8'- 4" (08), 9'- 4" (09), or 10'-2" (10) See Colors on Front Page Solid Wood 5867_ _ _ ◆ Inside Corner Molding 8'- 4" (08), 9'-4" (09), or 10'-2" (10) See Colors on Front Page Solid Wood ◆ W hen specifying or ordering, include the appropriate length and finish/material suffixes. EXAMPLES: 5855 N M P – 4" Base Molding in Natural Variations Maple; 584910 N M P – Nominal 10' Finish Molding in Natural Variations Maple. TechLineSM 877 ARMSTRONG armstrong.com/walls WOODWORKS® Walls Natural Variations™, Constants™, and Bamboo ACCESSORIES (continued) Item Number ◆ Description Length Finish Material Decorative Corners and Splines 5851_ _ _ _ _ Peak Corner 8' (08), 9' (09), or 9'-10" (10) See Colors on Front Page Solid Wood 5852_ _ _ _ _ Bullnose Corner 8' (08), 9' (09), or 9'-10" (10) See Colors on Front Page Solid Wood 5853_ _ _ _ _ Reverse Bead Corner 8' (08), 9' (09), or 9'-10" (10) See Colors on Front Page Solid Wood 5854_ _ _ _ _ Chamfered Corner 8' (08), 9' (09), or 9'-10" (10) See Colors on Front Page Solid Wood Corner Installation Spline 5859_ _ _ 8' (08), 9' (09), or 9'-10" (10) N/A (Concealed) Plastic (X) or Aluminum (Y) ◆ W hen specifying or ordering, include the appropriate length and finish/material suffixes. EXAMPLES: 5851 0 9 N D C – 9' Decorative Corner in Natural Variations™ Dark Cherry; 5859 0 9 X – 9' Corner Installation Spline in Plastic. NOTE: When a Decorative Corner is selected, you must also choose a Corner Installation Spline. Chair Rail Accessories 5861_ _ _ Mounting Rail 8'-4" See Colors on Front Page Solid Wood 5863_ _ _ Rail Insert 8'-4" See Colors on Front Page Solid Wood Solid Wood 5963NA Rail Insert – Aluminum Finish 8'-0" Natural Anodized (NA) and Aluminum 5864_ _ _ Rail Cap 8'-4" See Colors on Front Page Solid Wood 5866_ _ _ Easel Ledge 8'-4" See Colors on Front Page Solid Wood ◆ When specifying or ordering, insert the appropriate three-letter color suffix for all Chair Rail item orders, except 5963NA. EXAMPLE: 5861 C M A – Mounting Rail in Constants™ Maple. Spline System and Accessory Details Corner Installation Spline Chair Rail – Mounting Rail Chair Rail – Mounting Rail 6" Base Molding Inside Corner with Peak Decorative Corner with Rail Insert with Easel Ledge NOTE: For more information, refer to WoodWorks accessories dimensions guide, BPCS-3851, at armstrong.com/walls PHYSICAL DATA Material Application Considerations Bamboo Native is a premium veneer option managed FSC®-certified fire retardant particle board with face-cut Variation among panels may occur due to the natural through Architectural Specialties due to the potential veneers (SW-COC-003601). For more information about characteristics of the wood and grain (special order panels for significant color variation panel to panel. Mininum FSC-certified products or to view our FSC certification available). order quantity and extended lead time may apply. letter, visit armstrong.com/woodworksfsc It is very important that WoodWorks panels are climatized Specification Consideration Surface Finish prior to installation. Relative humidity between 25% and Attention: For FSC-certified wood products to maintain Clear or tinted semigloss coating 55% and temperatures between 50˚F and 86˚F must be their CoC certification, products must be sold to a maintained throughout the life of the product. CoC-certified distributor or directly to the installing Fire Performance contractor.
Load more

Recommended publications
  • Frame Design by David Lantrip, MCPF, GCF Framing Stained Glass
    Frame Design by David Lantrip, MCPF, GCF Framing Stained Glass skilled framer needs to be prepared to han- dle just about any form of artwork a cus- Atomer presents. Artwork that is seen less often can test a framer’s nerves since the particular needs and framing methods of that type of art might not come readily to mind. This is precisely why framers need to be prepared beforehand. After all, the design counter is not the place to learn about framing new type of artwork if the customer is to have confidence that the job will be done right. One such type of art is stained glass. Despite the fact that stained glass as an art has existed for 1,000 years, it’s not every day that someone brings a piece in to be framed. Displaying stained glass Traditional stained glass work, such as may seem intimidating, that found in but it can be framed churches and important build- and handled routinely ings, is worked in Stained glass worked in the Tiffany method midway through the lead came the soldering process. Once the soldering is complete, a small by following a few metal frame is applied, the solder has a patina applied, and the method. Relatively entire piece is cleaned and polished. basic design principles large pieces of glass, cut to shape, are held within H-shaped channels of lead known as foil strip, usually about ¼” wide, to the edge of the “came.” The ends of the came are soldered to adja- individual pieces of glass, burnishing and folding it cent pieces, and the glass is held tight with mastic to either side of the glass.
    [Show full text]
  • Japanning 101. Japanning in a Can, Easy Peasy
    Japanning 101. Japanning in a Can, Easy Peasy For a full discussion on various japanning mixes, quality of finish, durability and tips and techniques for success, refer to my earlier article, Japanning, or The Art of Embracing the Arcane at www.aPlaneLife.us. I highly recommend reading this article before beginning your project to understand the various mixtures and results. Have proper expectations goes a long way toward success. At the request of some readers, this series of articles will serve as a condensed, “how-to” for japanning an antique cast iron hand plane using various japanning products and mixtures. This series will start with the easiest method, commercially available japanning mix. This article will only cover the use of commercially available Rio Grande Asphaltum Varnish, although the tips and techniques should apply equally well to another commercially available pre-mixed japanning, Old PontyPool. I have chosen to focus on the Rio Grande product as I have significant experience using it, and it is very favorably priced compared to Old PontyPool. Affordable, economically sized and delivered to your door, easy. This product delivers a very deep, rich finish. Absolutely beautiful. Rio Grande Jewelers Asphaltum Varnish is available in pint cans online for about $17.00 plus shipping. Old PontyPool is sold by the quart at around $84.00 plus shipping. A pint of asphaltum varnish should cover about 15 size 4 hand planes. Old PontyPool may have more favorable performance, I have not used it, but given a limited shelf life and the quantity sold, I believe more people will be satisfied with the Rio Grande product.
    [Show full text]
  • The Complete Illustrated Guide to Shaping Wood / Lonnie Bird
    The COMPLETE ILLUSTRATED Guide to ShapingWood LONNIE BIRD ➤ Squares, Circles, and Ellipses ➤ Edge Treatments and Moldings ➤ Coves, Reeds, and Flutes ➤ Bent and Laminated Curves ➤ Turned and Carved Shapes The COMPLETE ILLUSTRATED Guide to ShapingWood TJ51-1-2008 IMUS 7/UOA0069-Shaping Wood W:9.25”xH:10.875” Wood TJ51-1-2008 IMUS 7/UOA0069-Shaping 175L EX 128White A M/A(D) The COMPLETE ILLUSTRATED Guide to ShapingWood LONNIE B IRD t TJ51-1-2008 IMUS 7/UOA0069-Shaping Wood W:9.25”xH:10.875” Wood TJ51-1-2008 IMUS 7/UOA0069-Shaping 175L EX 128White A M/A Magenta(D) Text © 2001 by Lonnie Bird Photographs © 2001 by Lonnie Bird Illustrations © 2001 by The Taunton Press, Inc. All rights reserved. Pp The Taunton Press, Inc., 63 South Main Street, PO Box 5506, Newtown, CT 06470-5506 e-mail: [email protected] DESIGN: Lori Wendin LAYOU T: Suzi Yannes ILLUSTRATOR: Mario Ferro PHOTOGRAPHER: Lonnie Bird LIBRARY OF CONGRESS CATALOGING-IN-PUBLICATION DATA: Bird, Lonnie. The complete illustrated guide to shaping wood / Lonnie Bird. p. cm. Includes index. ISBN-13: 978-1-56158-400-0 ISBN-10: 1-56158-400-2 1. Woodwork. I. Title. TT180 .B57 2001 TJ51-1-2008 IMUS 7/UOA0069-Shaping Wood W:9.25”xH:10.875” Wood TJ51-1-2008 IMUS 7/UOA0069-Shaping 175L EX 128White A M/A Magenta(D) 684’.08--dc21 2001027430 Printed in Thailand 1098765 About Your Safety: Working with wood is inherently dangerous. Using hand or power tools improperly or ignoring safety practices can lead to permanent injury or even death.
    [Show full text]
  • Joinery Seals & Glazing
    Joinery Seals & Glazing For Timber Windows & Doors All Exitex sealing and glazing systems are manufactured to the highest standards, incorporating many unique patented features. Quality you can trust Aluminium Hardened High Tensile to BS 1474 Anodising 15-25 Micrometers BS 3987 Powder Coating 60-80 Micrometers BS 6496 EPDM Gaskets to BS 4255 EPDM Cellular Rubber Gaskets to SS 243705A1, SS81813 PVC Gaskets to BS 7412 2 Joinery Seals For Timber Windows & Doors & Glazing Contents Aquatex™ 4 Weatherseals for Sliding Sash Windows 10 Self Adhesive Seals 20 Joinery Seals Wiper 21 Joinery Seals Compression 22 Aluminium Glazing Beads & Accessories 28 Self Adhesive EPDM Dry Glaze Profiles 31 Glazing Wedge Gasket for Secret Nailing 32 Push Fit & Single Sided Glazing Gaskets 34 Double Sided Tapes 35 Tilt & Turn Weatherbar 38 Securbead 40 Lokbead 42 Timber Bead Glazing Clips 44 Glazing Accessories 46 Intumescent Seals 48 Automatic Door Bottom Seals 51 3 Aquatex™ High Performance Weatherseals for Windows & Doors Key Performances Materials Temperature Range: -40°C to +70°C. Outer skin. Polyethylene. Compression Set: <15% (Properties include: inert, low friction, UV stable, colour options) UV Stability: 5000 hrs QUV tester. UVB 313 bulb. Foam Core. Polyurethane. (Properties include: excellent memory (4hrs light / 4hrs dark cycle) over extended temp range) Inserts. Polypropylene (Properties include: longitudinal stability and secure fixing) Features • P.U. foam core provides excellent recovery after long-term deflection. • Working temperature range -40°C to +70°C • Thicker polyethylene outer sheathing improves resistance to wear & tear. • Deflection ranges to cope with tolerance & seasonal movement of seal gap. • Excellent UV stability. • Outer skin not affected by paints & stains.
    [Show full text]
  • Custom Millwork Catalog TLS — 03.07
    Terry Lumber & Supply Co. Custom Millwork Catalog TLS — 03.07 Terry Lumber & Supply Company Inc. Lumber, Builder’s Supplies, Coal, Hardware, Mill Work 1710 West Mill Street | PO Box 216 | Peninsula, Ohio 44264 Millwork Profiles 2020 Akron: 330 657-2811 Cleveland: 330 659-6800 Fax 330 657-2940 www.TerryLumberSupply.com Table of Contents Table of Contents This is an interactive Table of Contents. Simply click the type of moulding below to go to that section and click our logo to return to the contents page. You can also browse page by page to view our profiles. We have an extensive library of additional moulding profiles not listed in this catalog. We also are able to duplicate your profile to exact specifications. Please contact us for more information. Base Mouldings 2 Casings 6 Crown Mouldings 11 Chair Rails 16 Stop Mouldings 17 Cap Mouldings 18 Trim Mouldings 19 Tread & Rail Mouldings 21 Panel Mouldings 23 Tongue & Grooves 24 Glossary Page 29 About Us Terry Lumber & Supply Co. is a third-generation, family- owned business specializing in personal service, quality lumber and building supplies. We are a full-service lumberyard, hardware store and hardwood mill. When you visit our facility will find the expected and discover the unexpected. Terry Lumber carries a full line of lumber products and a wide variety of hardware and specialty items that you won’t find at the box stores. We offer a large supply of building materials including framing and treated lumber, Trex composite decking, AZEK trim boards, a full line of cedar, doors, hardwood mouldings and trim.
    [Show full text]
  • Premier Adjustable Rail and Stile Poster
    Rail lengths: are determined based on the width of the stiles and the Routing edges of stiles and rails: Fence (aligned with bearing) Unlimited Cabinet Door Making Possibilites length of the tenon you plan to use. The rail length should be equal to: the width of the door, minus the width of two stiles, plus the length of 1 Take the Total Door Width • With the router unplugged, install the stile bit in the router (B). The with Freud’s Premier Adjustable Cabinet Door Set the two stub tenons. A single stub tenon measures 10.3mm (13/32”) – stile bit is the tallest of the two bits in your set, with one profi le Congratulations on your purchase of Freud’s world class Premier Adjustable Cabinet Bit Set. Freud’s mission is to design and manufacture long, two tenons would be 20.6mm (13/16”) long, so the formula is: 2 (–)Subtract Two Stile Widths (–) cutter and two slot cutters. Stile Bit Rail with cope cut from step A the highest quality, most technically advanced cutting tools available. This set contains everything you need to create a variety of + (Stick Cutter) Align Door Width – (Stile Width x 2) + 13/16”= Rail length • Use a straight edge to align the router table infeed and outfeed beautiful cabinet doors or any other doormaking project you have in mind. Freud develops and manufactures different carbide blends for 3 (+) Add in Two Tenon Lengths (+) Here each cutting application, so you can be sure that the high quality bit you’re using was designed specifi cally for creating fl awless raised fences with the bearing on the bit.
    [Show full text]
  • Download Course Catalog
    Brookfield Craft Center Current course list Monday, August 30, 2021 Group discounts and private lessons are available. Tuition discounts are available for Members. Scholarships are available for many classes. For more information and additional Classes go to our website www.brookfieldcraft.org. 286 Whisconier Road Brookfield, CT 06804 Call for more information: Brookfield Craft Center (203) 775-4526 ; [email protected] Page 1 of 40 Adult On Site Classses Basketry, Fiber Beginner Wicker Basketry Tuition: $240.00 Additional Fees: 24.00 Beginner Instructor(s): Katie DiGiacinto Location: LTB Fiber-Weaving Studio Meets 4Saturdays Date(s) 9/11/2021 Through: 10/2/2021 From 10:00 AM To: 1:00 PM Construct 2 small trinket baskets using simple over under weaves in this 4-week introduction to basket weaving. Students will be introduced to traditional wicker basket weaving methods such as twining and Japanese weaves. Skills learned in this class will be the foundation for future classes where students will use color in intricate and more advanced techniques. **Registration closes August 28th. For ages 16 and up. Clay Handbuilding Cups Tuition: $306.00 Additional Fees: 22.00 All Levels Instructor(s): Dana Lofink Location: Barn-Pottery Studio (First Floor) Meets 6Tuesdays Date(s) 9/14/2021 Through: 10/19/2021 From 6:00 PM To: 9:00 PM Take your ceramic creations to the next level! Learn about constructing cups without a wheel and give them the finishing touches that will impress. In this class we will discuss the basic hand-building techniques (coil and slab) and then explore a variety of methods in which to finish your piece - whether that be with a handle or an exciting surface.
    [Show full text]
  • Standard Patterns Western Wood Products Association STANDARD PATTERNS
    WP-7 8" LOG CABIN SIDING - - - - - - 2 SHIPLAP Western Wood Products Association Standard Patterns Western Wood Products Association STANDARD PATTERNS CONTENTS STANDARD PATTERNS N1E Nosed one edge LUMBER ABBREVIATIONS N2E Nosed two edges Paneling . 4 OS One side Paneling and Siding . 6 BEV Beveled PAT Pattern Siding . 7 BEV SDG Beveled siding P1E Planed one edge BS Both sides P2E Planed two edges Ceiling . 12 CB Center Beaded P1S Planed one side Ceiling and Partition . 13 CB1S Center bead one side P2S Planed two sides Partition . 14 CB2S Center bead two sides P4S Planed four sides CG Center groove P1S1E Planed one side one edge Shiplap . 15 CG2E Center groove two edges P2S1E Planed two sides one edge Tongued & Grooved . 16 CLG Ceiling P1S2E Planed one side two edges Decking . 16 CM Center matched PAR Planed all 'round CS Caulking seam PART Partition Decking and Flooring . 20 CSG Casing PE Planed edge Flooring . 21 CV Center Vee PPE Planed plain edge Corn Cribbing . 22 CV1S Center vee one side PSE Planed square edge CV2S Center vee two sides PSJ Planed and square jointed Grooved Roofing . 22 D2S Dressed two sides PTG Planed tongued and grooved Patent Lath . 22 D4S Dressed four sides R&B Rabbet & bead Stile . 22 DB CLG Double-beaded ceiling S Side, Surfaced DB PART Double-beaded partition SB1S Single bead one side Sill . 22 DBL T&G Double tongued & grooved SDG Siding Jamb . 22 D&CM Dressed & center matched SG Slash (flat) grain Ogee Batten . 23 DKG Decking S/L, or SL Shiplap D/S,DS Drop Siding SQ Square Casket Stock .
    [Show full text]
  • MLC History of Deming & Red Bead Experiment
    Michigan Lean Consortium Learning Program A History of Deming, the Red Bead Experiment and Lean The Scientific Method Applied to Management and Leadership Facilitated by Dennis Sergent 517-285-5500 A Learning Agenda For Today • Learning About Deming & Quality – First Hour – the connection of Deming’s work to the scientific method – his long history and why some call him the “father of quality” – his philosophies of systems, productivity, and economics – a number of tools of quality that help your Lean journey • Learn and Practice The Red Bead – Second Hour – the source of low performance by workers – the influence that workers have on quality – the source of variation between shifts and workers – how to predict the future based on the past – how mechanical sampling results differ from random numbers – how to understand common cause and special cause variation – how well intended managers, leaders and workers tamper with the system through performance appraisals, rating and ranking of workers • Linkage of Deming to Lean – Third Hour • the many connections of his work to Lean • embedded in the System of Profound Knowledge Dennis Sergent 517-285-5500 [email protected] - 07/09/2013 - Page 2 An Introduction to this Learning Program • Learning, not training – This is about you, not the facilitator • Dialogue, not a lecture – We will facilitate the dialogue about the subject • We will not read the slides to you – We will use the handouts as a point of reference today and in the future • You do not need to read the slides – But it might help
    [Show full text]
  • Moulding & Millwork Guide
    #214 $7.50 MOULDING & MILLWORK GUIDE BUILDING MATERIALS DISTRIBUTION For 1,000 more moulding profiles visit our website: www.taguelumber.com Kennett Square | Malvern | Media | Philadelphia | Phoenixville For over 100 years... Since 1908 Tague Lumber has been providing professional builders and remodelers with superior: lumber, building materials, millwork, and architectural products. We pride ourselves on providing professional service, fair prices, and quality products to all our customers. In addition, Tague offers prompt, on-site delivery from our distinctive fleet of red trucks including: 6-story boom trucks, moffett fork lifts, flatbed trucks, curtain side box trucks, standard box trucks, and service vans that can deliver what you want, exactly where you want it. Our Moulding Guide continues to be a valued source of reference and inspiration to all our clients. Now, we proudly present the revised edition of our Moulding Guide with expanded profile categories and many new moulding selections which are available in a variety of wood species, as well as MDF and PVC. The easy-to-use index allows you to search for mouldings by category or by individual profile number. In addition to the hundreds of profiles in this book, Tague Lumber has over 1,000 more moulding profiles available on our website, and in excess of 2,000 knives in our library. Our profiles are also available for download in DWG and DXF formats on our website. Best of all, our Custom Mill Shop allows us to make this promise—if we don’t already have the moulding profile you need—we’ll be happy to make it for you.
    [Show full text]
  • DOOR and DRAWER STYLE SELECTION Choosing Your Door and Drawer Style
    DOOR AND DRAWER STYLE SELECTION Choosing Your Door And Drawer Style The one thing that will affect the look of your kitchen perhaps more than anything else is the style of your cabinet door and drawer fronts. And there are many styles available to you. Traditional cope and stick, slab, or mitered construction. Raised or flat (recessed) panels. Ogee, square, or regular beads. And more…So many choices! I’d like to take a moment to help parse out the details. We’ll look at the different types of construction, the options for material, edge, bead, and panel profiles, and some other door and drawer choices that may interest you. Construction There are three main types of door construction: 1. Traditional (also known as mortised or cope and stick) 2. Mitered 3. Slab Traditional Doors A door or drawer style called “Traditional” is made of five pieces, which is why they are sometimes called “5-Piece doors” or “5-Piece drawers”. Think of this type of door as a picture frame that has a top and bottom rail (the horizontal members of the frame), a left and right stile (the vertical members of the frame) that together house a center panel (which is where the glass would be in a picture frame). For the frame, you can choose the style of the outside edge profile and the framing bead, which is the inside edge profile. Further, you can choose either a raised or flat center panel. If you choose a raised panel, then you will have to decide on the raised panel profiles from a number of options.
    [Show full text]
  • A Description of 19Th-Century American Gilded Picture Frames
    Figure 1. Plate 9 from Benjamin, A. (1827). The American Builder’s Companion. “A, cavetto, or hollow; B, cavetto and astragal; C, ovolo and fillet; D, ovolo and astragal; E, cymareversa, or ogee; F, cymareversa and bead; G, astragal; H, bead; I, cimarecta; K, L, and M, are scoties of different projections and curves; N, O, P, are quirk ogees.” 2006 WAG Postprints—Providence, Rhode Island A Description of 19th-century American Gilded Picture Frames and an Outline of Their Modern Use and Conservation Hugh Glover, Conservator of Furniture and Wood Objects, Williamstown Art Conservation Center ABSTRacT Picture frames are a functional component of most art collections and they are subject to wear and tear as they fulfill their housing function for paintings. Damage to picture frames can occur during exhibitions, storage, and travel, and is caused by handling, hanging processes, adverse environments, neglect, and irreversible restorations. Picture frames are maintained by a variety of preservation specialists, and despite their ubiq- uity they have not become the domain of any one conservation discipline, and there is scant literature devoted to their preservation interests. This paper will focus on the analysis of 19th century American gilded picture frames, as well as preventive care, modern modifications, and restoration/conservation treatments. The talk is derived from the cumulative experience in treating frames at the Williamstown Art Conserva- tion Laboratory (WACC). The paper will address frame nomenclature and the development of popular styles and con- structions of the 19th century. It will outline ornament forms and materials, and give an overview of period gilding techniques.
    [Show full text]